Octave board assembler jobs near me - 348 jobs

Summary: Assembles electronic components, subassemblies and products according to quality specifications and process procedures by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. * Reads, interprets, and works from drawings, blueprints, schematics, work orders, wiring diagrams, product samples and written or verbal instructions with limited supervision to determine assembly duties and materials requirements, and selects components such as transistors, resistors, capacitors, and integrated circuits. * Assembles electronic/mechanical products, systems or support structures and installs components, units, subassemblies, wiring, or assembly casings, using small hand tools and soldering equipment. * Cleans parts, using cleaning solutions, air hoses, and cloths. * May perform assembly operations under a microscope or another magnifying device. * Positions and aligns parts in specified relationship to each other in jig, fixture, or other holding device, and prepares soldering surfaces. * Uses a variety of equipment including but not limited to power supplies, multimeters, leak detection/vacuum systems, pressure generators, volt meters, ohmmeters, ovens, soldering equipment, microscopes and a variety of precision hand tools. * Aligns and clamps parts together, or positions items in fixtures, jigs, or other holding devices as required. * Measures parts to determine tolerances, using precision measuring instruments such as micrometers and calipers. * Connects component lead wires to printed circuit or route and connects wires between individual component leads and other components, connectors, terminals, and contact points. * Assembles and attaches hardware, such as caps, clamps, knobs, and switches, to assemblies. * Adjusts or trims materials from components to achieve specified electrical or dimensional characteristics. * Performs intermediate assembly tasks, such as potting, sanding, cleaning, epoxy bonding, curing, stamping and etching parts and assemblies. * Performs trimming, preparation and application of components including but not limited to wire, cables, connectors, and resistors using solder and various adhesives as specified by prints and procedural documents. * Adjusts, repairs, or replaces electronic component parts to correct defects and ensure conformance to specifications. * Performs go/not-go testing and inspection to ensure parts and assemblies meet quality, performance, and production specifications and standards. * Creates documentation for process improvement (ECR). * Confers with supervisors or engineers to plan or review work activities or to resolve production problems. * Inspects, tests, and adjusts completed units to ensure that units meet specifications, tolerances, and customer order requirements. * Produces parts/products efficiently with a minimum of waste and rework. Knowledge, Skills and Abilities: To perform the job successfully, an individual should demonstrate the following knowledge, skills and abilities. * Knowledge of quality standards and ESD-safe procedures. * Ability to work with solder/soldering iron and small quantities of assembly supplies and chemicals. * Demonstrated ability to assemble SMT (surface mount) and through-hole electronic components. * Strong communication skills and ability to understand verbal and written instructions. * Must be a team player and have ability to work with people of diverse backgrounds. * Ability to learn and understand dimensions on drawings. * Must have a working understanding of computers and be able to demonstrate the ability to learn. * Ability to stand or sit for long periods of time. * Ability to multitask and handle interruptions to support operators. Requirements Education and/or Experience: * High school diploma or general education degree (GED) preferred; and 0-2 year(s) of related manufacturing assembly experience and/or training; or equivalent combination of education and experience. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand, walk, and reach with hands and arms. The employee must occasionally stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually moderate to loud. We believe in transparent and equitable pay. All U.S. job postings include a good-faith salary range based on role, location, experience, and internal equity. We're happy to discuss compensation openly throughout the hiring process.

Rantec is hiring for entry-level Electronic Assemblers on our hybrid shift (12p - 9:30pm)! Training provided with starting pay at $21 per hour! Are you interested in electronics, detail-oriented, willing to learn, and enjoy hands-on work? Come join our team! Based in Los Osos, California, located along California's scenic Central Pacific coastline, Rantec offers many outstanding benefits, the following are a few: Competitive wages Great benefits - i.e. Medical (PPO, HSA), Dental, Vision, Flexible Spending Accounts Vacation - 2 weeks to start, Holidays, PSL Tuition Assistance 401K with matching up to 6%, Peer-to-Peer recognition and Years of Service Awards. We have every other Friday off as we are on the 9/80 schedule Free catered lunch on the Friday/payday that we work. Voluntary overtime hours available. Position Summary Under general supervision, perform a variety of manufacturing assembly tasks in accordance with product documentation. This role covers a large variety of electronic assembly tasks, processes, soldering, machine operation, material uses, operating equipment, and hand tools. Team members may work at several workstations, on product that is typically ‘shoe box' sized. Employees in this role must be able to learn and grow within the manufacturing team. Essential Duties and Responsibilities Perform assembly of electronic components, subassemblies, and final products using small hand tools, electronic screw drivers, general adhesive staking, and soldering equipment. Read and interpret assembly instructions, product drawings, bill of materials (BOM), and job order travelers. Conduct visual inspections of workmanship. Document work performed and complete required production records accurately. Follow established safety procedures and maintain a clean, organized workspace. Collaborate with quality control and manufacturing engineering teams to resolve assembly or product issues. Identify and recommend process improvements to increase efficiency and product reliability. Ability to work flexible hours and/or different shifts, as required. Ability to work in a safe professional manner adhering to all regulatory requirements including OSHA, EPA, State and Federal Regulations. As the Company's success relies on the productivity of our team and adherence to customer product schedules, an essential function of this position is the ability to arrive to work on-time, and work each day, as scheduled. Perform other duties as assigned. Education and Experience High School diploma or GED Follow assembly drawings and work instructions Minimal computer skills to support timekeeping and accessing data in MRP/ERP system Manual dexterity to effectively use hand tools while performing assembly tasks Mechanical ability to operate assembly equipment Strong work ethic and organizational skills to meet demands of fast-paced work environment under production schedules Rantec is an upper-tier designer and manufacturer of power supplies for the military and aerospace markets. We are an engineering-based company, with expertise in all aspects of power supply design, manufacturing and test. Salary: $21.00 Hourly Click on this link to read Rantec's Privacy Policy Rantec is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or status as a protected veteran. Rantec will consider requests for reasonable accommodation from applicants with disabilities or sincerely held religious beliefs. If you require accommodation during the application process, please contact [email protected].

Job Description Mechanical Assembler - First Shift (Valley View, OH) $22.00/hour • 4-Day Workweek • Full-Time Now hiring a mechanically inclined assembler to join our manufacturing team in Independence, OH. You'll build heavy-duty industrial equipment using hand tools, power tools, and detailed blueprints. This is a first-shift, four 10-hour days per week schedule. What You'll Do Assemble industrial equipment components using hand and power tools Read and interpret complex blueprints, drawings, and assembly instructions Complete mechanical assemblies independently or as part of a team Inspect work for accuracy, fit, and quality Identify and correct defects or misalignments Maintain a clean, organized, and safe work area Communicate issues such as missing parts or unclear instructions What We're Looking For Strong mechanical aptitude Must own basic hand tools (wrenches, sockets, pliers, etc.) Ability to read and understand technical drawings/blueprints Experience using drills, impacts, grinders, torque tools, etc. Able to lift and move heavy parts (team lifting available) Comfortable working independently with minimal supervision Reliable, detail-oriented, and safety-focused

Job Description If you need any assistance seeking a job opportunity at this company, or if you need reasonable accommodation with the application process, please call or contact us at . MISSION: The Soldering Assembler is responsible for surface-mount, through-hole, and mechanical assembly of a wide range of radio frequency (RF) modules, systems, and subsystems. This position requires the ability to take direction from the Production Lead to achieve results in a production environment and the ability to respond quickly to customer needs and maintain flexibility. An individual successful in this role must be able to work cross-domain and provide high quality assembly of defense and aerospace electronic assemblies. YEAR 1 ACCOUNTABILITIES AND METRICS Develop soldering skills Metric: Obtain J-STD-001 Certification Demonstrate basic operation and maintenance of manufacturing equipment and tools including Soldering Iron, Solder Paste Machine, Reflow Over, Pick and Place Machine, PCB Washing Machine, and other equipment as defined by supervisor. Metric: Demonstrate competency in use to supervisor Assemble printed circuit board assemblies with minimal rework. Metric: Rework is minimal and does not exceed the bounds of NuWaves' quality thresholds or put projects at risk Work within the bounds of AS9100 Quality Management System, producing quality work product, following procedures, and documenting as appropriate. Metric: Describe your role in achieving NuWaves' quality standards to the Quality Control Supervisor within one month of hire Salary Range: $15 - $25/hr U.S. Citizenship is a requirement.

Summary: Assembles electronic components, subassemblies and products according to quality specifications and process procedures by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. Reads, interprets, and works from drawings, blueprints, schematics, work orders, wiring diagrams, product samples and written or verbal instructions with limited supervision to determine assembly duties and materials requirements, and selects components such as transistors, resistors, capacitors, and integrated circuits. Assembles electronic/mechanical products, systems or support structures and installs components, units, subassemblies, wiring, or assembly casings, using small hand tools and soldering equipment. Cleans parts, using cleaning solutions, air hoses, and cloths. May perform assembly operations under a microscope or another magnifying device. Positions and aligns parts in specified relationship to each other in jig, fixture, or other holding device, and prepares soldering surfaces. Uses a variety of equipment including but not limited to power supplies, multimeters, leak detection/vacuum systems, pressure generators, volt meters, ohmmeters, ovens, soldering equipment, microscopes and a variety of precision hand tools. Aligns and clamps parts together, or positions items in fixtures, jigs, or other holding devices as required. Measures parts to determine tolerances, using precision measuring instruments such as micrometers and calipers. Connects component lead wires to printed circuit or route and connects wires between individual component leads and other components, connectors, terminals, and contact points. Assembles and attaches hardware, such as caps, clamps, knobs, and switches, to assemblies. Adjusts or trims materials from components to achieve specified electrical or dimensional characteristics. Performs intermediate assembly tasks, such as potting, sanding, cleaning, epoxy bonding, curing, stamping and etching parts and assemblies. Performs trimming, preparation and application of components including but not limited to wire, cables, connectors, and resistors using solder and various adhesives as specified by prints and procedural documents. Adjusts, repairs, or replaces electronic component parts to correct defects and ensure conformance to specifications. Performs go/not-go testing and inspection to ensure parts and assemblies meet quality, performance, and production specifications and standards. Creates documentation for process improvement (ECR). Confers with supervisors or engineers to plan or review work activities or to resolve production problems. Inspects, tests, and adjusts completed units to ensure that units meet specifications, tolerances, and customer order requirements. Produces parts/products efficiently with a minimum of waste and rework. Knowledge, Skills and Abilities: To perform the job successfully, an individual should demonstrate the following knowledge, skills and abilities. Knowledge of quality standards and ESD-safe procedures. Ability to work with solder/soldering iron and small quantities of assembly supplies and chemicals. Demonstrated ability to assemble SMT (surface mount) and through-hole electronic components. Strong communication skills and ability to understand verbal and written instructions. Must be a team player and have ability to work with people of diverse backgrounds. Ability to learn and understand dimensions on drawings. Must have a working understanding of computers and be able to demonstrate the ability to learn. Ability to stand or sit for long periods of time. Ability to multitask and handle interruptions to support operators. Requirements Education and/or Experience: High school diploma or general education degree (GED) preferred; and 0-2 year(s) of related manufacturing assembly experience and/or training; or equivalent combination of education and experience. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand, walk, and reach with hands and arms. The employee must occasionally stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The noise level in the work environment is usually moderate to loud. We believe in transparent and equitable pay. All U.S. job postings include a good-faith salary range based on role, location, experience, and internal equity. We're happy to discuss compensation openly throughout the hiring process. Salary Description 18.00-23.00

Cardinal Staffing Services is hiring for a General Electronic Assembler for a client in Millbury, OH. As General Electronic Assembler your primary duties are to assemble electronic parts, such as circuit boards, to be mounted into larger assemblies. This requires the utilization of various hand tools and equipment to perform duties. A General Electronic Assembler must adhere to safety precautions during operations to prevent electrical hazards in the workplace. Pay: $13 to $15, based on experience Hours: 7:30AM to 4:00PM, Flexible after 90 days (with a ½ unpaid lunch and two (2) paid breaks ¼ hour each) Responsibilities of the General Electronic Assembler: • Responsible for carrying out the duties listed below in a proficient, orderly manner all while maintaining a positive attitude and solid attendance record. • Read, understand, and accurately follow drawings, prints, and other reference documentation. • Able to follow written instructions and provide feedback as to how to improve those?Instructions. • Position and align parts in specified arraignments. • Maintain the work area and equipment in a clean and orderly condition by performing daily organization and cleanup of work area. • Perform other tasks as assigned within the qualifications and training received. Requirements and Qualifications: • High School Diploma or GED.• Fine motor skills a must. • Must possess good attention to detail and a high degree of precision. • Basic knowledge or Windows-based computers, MS Word and Excel preferred. About Cardinal StaffingAt Cardinal Staffing, we are dedicated to helping individuals unlock their career potential through meaningful job opportunities. As a leading staffing agency in the light industrial and manufacturing space, we pride ourselves on connecting talent with top employers across the Midwest and Southeast. With an estimated yearly revenue of $295 million, Cardinal Staffing was recently named one of the largest staffing firms in the U.S. by Staffing Industry Analysts (SIA).We understand that finding the right job is about more than just a paycheck - it's about finding the opportunity that fits your skills, goals, and lifestyle. Here are the benefits you'll enjoy when you partner with us:· Access to a wide range of job opportunities· Competitive pay· Health and Wellness Programs (including EAP)· Medical benefits including medical, vision, dental, and prescriptions· Electronic weekly pay· Employee Advocacy & Personalized Job SupportCardinal Staffing also follows all applicable state and local laws regarding sick time, paid time off, and retirement savings programs. Cardinal Staffing is an equal opportunity employer. Notice Regarding the Use of Artificial Intelligence in Employment DecisionsIn accordance with state mandates, we are providing this notice to inform all applicants and employees that artificial intelligence (AI) tools may be used at various stages of our employment processes. This may include recruitment, screening, hiring, promotion, or other employment?related evaluations.AI tools may assist in reviewing application materials, assessing qualifications, or supporting decision?making. These tools do not replace human judgment; rather, they are used to support consistent and efficient evaluation. Our commitment to speed-to-hire means we work efficiently to get you placed in the right role, fast. If you're ready to take control of your career, explore exciting opportunities, and gain experience that lasts, then Cardinal Staffing is the place for you. Let's get started today! #IND1

Full-time Fairfield, OH Finn Corporation, a leader in Innovative Ground Management Solutions, for over 80 years, has immediate openings for Mechanical Assembly Operators. Our company provides a productive, friendly, and collaborative work environment, industry-leading products, solid financials, and competitive pay and benefits. The Assembly Operator will assemble components for ground management machinery with a high degree of accuracy and efficiency following customer specifications. The assembly operation requires an aptitude and understanding of basic mechanical skills. Successful candidates for this position will be provided extensive training, under the guidance of experienced operators, in the areas of hydraulics, wiring, engine, and technical assembly methods. Successful candidates will be required to provide their own hand tool equipment. Job Responsibilities Assemble mechanical components with a high level of precision and attention to detail. Follow instructional documents and specifications high with a high level of accuracy. Learn and apply proper installation methods for hydraulic systems, wiring, engine, and assembly methods. Assist in quality inspection and testing. Assist experienced operators as required. Maintain a clean and orderly work area. Perform other duties as required. Requirements Education, Skills, and Experience Required Excellent attendance High school degree or equivalent Demonstrated experience and a strong aptitude for mechanical systems Basic mathematical skills, and the ability to calculate precise measurements Strong attention to details, quality, and accuracy Team player who works to assist and support others Takes personal accountability for job duties and results. Desired Vocational mechanical training Previous work experience in manufacturing. (Lean manufacturing, Tier 2 or Tier 3 experience a plus). Previous work experience in hydraulics, wiring, engines, or assembly methods.

Mechanical Assembler The Assembler is responsible to fit and assemble components according to assembly blueprints, manuals, engineering memos, and sketches, using hand tools and power tools. ESSENTIAL JOB FUNCTIONS: Analyzes assembly blueprint and specifications manuals. Meet established production and quality standards, while conforming to all company attendance, safety, and personnel policies. Verifies conformance of parts to stock list and blueprints, using measuring instruments such as calipers, gauges, and micrometers. Lays out hole locations and drills and taps holes on parts for assembly. Aligns components for assembly, manually or with hoist, and bolts, screws, dowels, welds, or rivets parts together, using hand tools, rivet gun, and welding equipment, or arranges for assembly by welder and electrician. Verifies alignment and tolerances of moving parts using measuring instruments. Installs wiring and electrical components to specifications. Operates forklift as required. Operates any equipment needed to perform job. Maintain clean, organized and safe work environment following all safety standards and requirements. Perform preventative maintenance tasks as required. Other tasks as assigned. QUALIFICATIONS: Required: Related experience or training. Preferred: High School diploma or GED. PHYSICAL REQUIREMENTS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. While performing the duties of this position, the employee is regularly required to stand. The employee frequently is required to use hands or fingers, handle or feel objects, tools, or controls, and to climb or balance. The employee is occasionally required to walk, reach with hands and arms; stoop, kneel, crouch or crawl; and talk or hear. The employee must regularly lift and move up to 25 pounds and occasionally lift and move up to 50 pounds. Specific vision abilities required by this position include close vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: Work is performed in a fast-paced shop setting with frequent interruptions. While performing the duties of this job, the employee is regularly exposed to vibration. The employee occasionally works near moving mechanical parts and in high, precarious places. The noise level in the work environment is usually very loud. OTHER: This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Schedule: 8 hour shift Day shift Monday to Friday Overtime Weekends as needed Ability to commute/relocate: Troy, OH 45373: Reliably commute or planning to relocate before starting work (Required) Work Location: In person

Location: Cincinnati, OH Employment Type: 1st Shift, Full-time, temp-to-hire Job Brief Kable Workforce Solutions is hiring an Electrical/Mechanical Assembler for our client. This position is responsible for reading and interpreting schematic drawings, diagrams, blueprints, specifications, work orders, and reports to determine material requirements and assembly instructions.What's a Typical Day Like? Reads and interprets the job assignment's schematic drawings, diagrams, blueprints, specifications, work orders, or reports to determine materials requirements or assembly instructions. Assembles, positions, aligns, and fastens components to back planes or units by using a variety of hand tools and equipment. Assembles electrical or electronic systems or support structures and install components, units, subassemblies, wiring, or assembly casings, using rivets, bolts, soldering or micro-welding equipment. Adjusts, repairs, or replaces electrical or electronic components to correct defects and to ensure conformance to specifications. Positions, aligns, or adjusts workpieces or electrical parts to facilitate wiring or assembly. Tests assembled parts to ensure correct functionality when required. Identifies and reports faulty or unsafe components and conditions to management during the assembly process. Prepares all surfaces and components to ensure no damage occurs during assembly and testing. Reports all accidents, injuries, unsafe activities, maintenance requirements, or mechanical faults. Complies with all safety policies, practices, and procedures per the Company's protocols. Follows the Five S methodology manual at all times. Sort, Set, Shine, Standardize, and Sustain. What Are the Requirements of the Job? High School Diploma or GED. Ability to read and interpret schematic drawings, blueprints, and specifications. Strong communication skills. Consistent attendance and a safety-conscious attitude. Ability to work with minimal errors and take initiative. Must be able to remain stationary for 60% of the time; ability to lift up to 60lbs or 600lbs with assistance. Exposure to fumes, airborne particles, and chemicals; noise level typically moderate. Required to wear personal protective equipment. Ability to work in fast-paced environment. Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel. Ability to utilize hand/eye coordination. Capability to stand for prolonged periods of time Why Choose Kable Workforce Solutions? Weekly Pay Exclusive Access Opportunities to V.I.P. Vault Day 1 Benefits Various Bonus Opportunities Eligibility for Employee of the Month Rewards How to Apply And Next Steps? Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.

Welcome to Avcom SMT, Inc. Avcom SMT, Inc. is a complete electronic service manufacturer near Columbus, OH in Westerville that offers the ability to choose the services you require. Avcom will manage and produce your entire project or perform a single service that fits your needs. We have the flexibility to handle existing designs that require hand assembly, as well as, robotic assembly. We are a small family owned and operated business that takes care of our customers and employees. We have an extremely low turn over rate, so contact us quickly, because we only have these positions open for a limited time. Job Description: Soldering skills is a Requirement ! 1) Performs any combination of following tasks to assemble electronic components, subassemblies, products, or systems: Reads work orders, follows production drawings and sample assemblies, or receives verbal instructions regarding duties to be performed. 2) Positions and aligns parts in specified relationship to each other in jig, fixture, or other holding device. 3) Crimps, stakes, screws, bolts, rivets, welds, solders, cements, press fits, or performs similar operations to join or secure parts in place, using handtools, power tools, machines, and equipment. 4) Mounts assembled components, such as transformers, resistors, transistors, capacitors, integrated circuits, and sockets, on chassis panel. 5) Connects component lead wires to printed circuit or routes and connects wires between individual component leads and other components, connectors, terminals, and contact points, using soldering, welding, thermocompression, or related bonding procedures and equipment. 6) Installs finished assemblies or subassemblies in cases and cabinets. 7) Assembles and attaches hardware, such as caps, clamps, knobs, and switches, to assemblies. 8) Performs intermediate assembly tasks, such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, impregnating, and color coding parts and assemblies. 9) Tends machines that press, shape, or wind component parts. 10) Adjusts or trims materials from components to achieve specified electrical or dimensional characteristics. 11) Performs on-line go-not-go testing and inspection, using magnifying devices, measuring instruments, and electronic test equipment, to ensure parts and assemblies meet production specifications and standards. 12) May perform assembly operations under microscope or other magnifying device. 13) Occupations related to assembly of printed circuit boards and fabrication of integrated circuit chips are defined under separate definitions. Qualifications Electronic Assembly experience a plus, and must be willing learn. Also a team member working towards one goal... Additional Information All your information will be kept confidential according to EEO guidelines.

Welcome to Avcom SMT, Inc. Avcom SMT, Inc. is a complete electronic service manufacturer near Columbus, OH in Westerville that offers the ability to choose the services you require. Avcom will manage and produce your entire project or perform a single service that fits your needs. We have the flexibility to handle existing designs that require hand assembly, as well as, robotic assembly. We are a small family owned and operated business that takes care of our customers and employees. We have an extremely low turn over rate, so contact us quickly, because we only have these positions open for a limited time. Job Description: Soldering skills is a Requirement! 1) Performs any combination of following tasks to assemble electronic components, subassemblies, products, or systems: Reads work orders, follows production drawings and sample assemblies, or receives verbal instructions regarding duties to be performed. 2) Positions and aligns parts in specified relationship to each other in jig, fixture, or other holding device. 3) Crimps, stakes, screws, bolts, rivets, welds, solders, cements, press fits, or performs similar operations to join or secure parts in place, using handtools, power tools, machines, and equipment. 4) Mounts assembled components, such as transformers, resistors, transistors, capacitors, integrated circuits, and sockets, on chassis panel. 5) Connects component lead wires to printed circuit or routes and connects wires between individual component leads and other components, connectors, terminals, and contact points, using soldering, welding, thermocompression, or related bonding procedures and equipment. 6) Installs finished assemblies or subassemblies in cases and cabinets. 7) Assembles and attaches hardware, such as caps, clamps, knobs, and switches, to assemblies. 8) Performs intermediate assembly tasks, such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, impregnating, and color coding parts and assemblies. 9) Tends machines that press, shape, or wind component parts. 10) Adjusts or trims materials from components to achieve specified electrical or dimensional characteristics. 11) Performs on-line go-not-go testing and inspection, using magnifying devices, measuring instruments, and electronic test equipment, to ensure parts and assemblies meet production specifications and standards. 12) May perform assembly operations under microscope or other magnifying device. 13) Occupations related to assembly of printed circuit boards and fabrication of integrated circuit chips are defined under separate definitions. Qualifications Electronic Assembly experience a plus, and must be willing learn. Also a team member working towards one goal... Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description 1st Shift Mechanical Assembler - Direct Hire We are recruiting for a manufacturing company seeking a 1st Shift Mechanical Assembler for their facility located in Solon, OH. This is a permanent, direct-hire opportunity with a stable & growing company that offers strong benefits and long-term growth potential. Pay Rate: $19.00 - $22.00 per hour Shift: 1st shift What You'll Do: Assemble hydraulic lines, axles, and trailers Follow blueprints, work instructions, and assembly drawings Use hand and power tools to complete mechanical assemblies Ensure quality and accuracy throughout the assembly process Requirements: Mechanical assembly experience preferred Ability to assemble hydraulic components, axles, and trailers Comfortable using hand and power tools Welding experience not required What's Offered: Competitive hourly pay Full benefits package Paid vacation time 401(k) with company contribution Opportunity for advancement and long-term growth If you're interested in learning more about this opportunity, please reply to this posting and we can schedule a time to talk.

This company in the Solon/Twinsburg area serves the MRI healthcare industry. Working in manufacturing you will get hands on experience to the innovative technology. They are looking for an Electronic Assembler. Available Shifts: 2nd Shift: 4p-12:30a M-F $22/hr. Role Summary: Performs diverse assignments in support of product development and manufacturing. Soldering electronic components on circuit boards and performing mechanical assembly work. Working off of drawings and instructions Responsibilities may include manufacturing, assembly, basic testing, reporting/documenting results of tests and assembly operations, packaging and shipping of products with significant supervision. Required Qualifications High School Diploma or local equivalent Proficiency to understand and interpret basic written technical information Demonstrated attention to detail and quality-minded work habits Ability to communicate using English (or local language) Prior Assembly experience is a plus! Benefits of Working with Us: Working with Vector Technical entitles you to a bunch of great benefits you can't get anywhere else, including: FREE Teladoc Virtual Healthcare 6 Paid Holidays a year (after only 30 days) Medical/Dental/Vision/Short Term Disability available to all Vector Employees Paid vacation and 401K matching after a year #IND100

We are looking for a reliable and detail-oriented Electronic Assembler to join our manufacturing team. In this role, you will build, assemble, and test electronic components and systems according to specifications, ensuring high quality and reliability. The ideal candidate has strong manual dexterity, the ability to read assembly instructions, and a commitment to precise, safety-conscious work. This position is suitable for candidates who enjoy hands-on tasks and working collaboratively in a production setting. Job Responsibilities Assemble electronic components and products using hand tools, power tools, and assembly equipment per work orders and schematics. Read and interpret assembly instructions, blueprints, and wiring diagrams to ensure accurate construction. Inspect and test assembled units to verify quality and functionality; identify defects and notify supervisors as required. Solder components and connect wiring where applicable (training may be provided depending on level of experience). Maintain a clean and organized work area, ensuring compliance with safety and quality standards. Record production output and document any issues encountered during assembly. Collaborate with team members to meet production goals and uphold department standards. Adhere to all company policies and safety procedures at all times. Job Qualifications High school diploma, GED, or equivalent. Ability to follow detailed instructions and work independently. Good hand-eye coordination and manual dexterity. Basic understanding of electronic components and assembly processes. Willingness to work in a manufacturing environment and stand for extended periods. Previous experience in electronic assembly, manufacturing, or a related field. Familiarity with soldering techniques and electronic testing tools. Ability to read and interpret technical drawings and schematics. Comfortable lifting up to 25-30 lbs and performing repetitive tasks.

Job Description NOW HIRING - MULTIPLE MANUFACTURING POSITIONS! 1st & 2nd Shift Opportunities | Full-Time & Part-Time | $2,000 Sign-On Bonus Myers Controlled Power is urgently hiring motivated, reliable individuals to join our growing team in Canton, OH! Whether you're an experienced manufacturer or looking to learn new skills, we have opportunities for you. Available Positions: Assemblers / Raceway & Breaker Wireman Why You'll Love Working Here $2,000 Sign-On Bonus - $1,000 at 6 months + $1,000 at 1 year Competitive Hourly Pay - Based on experience Flexible Schedules - Choose between 4 ten-hour days or 5 eight-hour days Part-time options available! Consistent 1st & 2nd Shift Options - With opportunities for overtime Full Benefits Package - Medical, Dental, Vision, Life & Disability Paid Time Off & Holidays 401(k) with Company Match Referral Bonuses - Bring your friends and earn rewards! What We're Looking For High School Diploma or GED Previous manufacturing experience is a plus - but not required Dependable, safety-focused, and eager to learn Positive attitude and strong teamwork Work Type: Full-time and Part-time available Location: Canton, OH 44706 (In-person) Travel: Up to 25% (Preferred) Ready to Build Your Future? Apply today and become part of the Myers Controlled Power team - where hard work is rewarded and careers are built to last!

Job Description We now have Fulltime and Part Time positions available for qualified candidates. Why QED? Quiet Clean environment Employees can wear headphones at their station Discounted Gym Membership Growth Potential Core hours - 1st Shift 7:00am to 3:30pm Flexible Scheduling for Part Time Why you? Looking to put your experience to good use. You like building things that help people. You like with working with your hands, and your good with them. You like having detailed instructions. You think electronics are interesting. If this sounds like a place you would like to work, check out the job posting below and apply today! JOB SUMMARY An Electronics Assembler performs assembly and repairs on electronic and mechanical assemblies by following instructions and using provided tools, equipment and programs, to help the plant team meet its goals. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform assembly operations per documented procedures and applicable standards. Follow all safety and ESD guidelines. Ensure good organization and cleanliness of work bench and manufacturing area. Contribute to building a culture of cooperation and teamwork. Perform assembly and repair operations per documented procedures and applicable standards. Exchange information with auditors as needed. Contribute to building a culture of cooperation and teamwork to improve product flow, quality and reduction in scrap. Must be an active agent to support efforts in increasing quality and efficiency. Review instructions and records for accuracy and correct GDP. Perform QC inspections per documented procedures and applicable standards. Review instructions and records for accuracy and correct GDP. Document Errors though creation of NCRs and QFs. QUALIFICATIONS: Education and Experience High school diploma (or equivalent) Skills and Abilities Required Ability to perform intricate electrical and/or mechanical assembly Demonstrated proficiency in written and verbal communication Work at or above standard job quality Must successfully complete hands-on solder training within probation period Basic computer skills Ability to work at standard job efficiency after reasonable job training period Preferred Basic soldering skills Basic surface mount soldering experience Familiarity with industry standards Familiarity with Microsoft Word and Excel Physical Requirements Ability to lift 25 pounds Ability to stand for an extended period of time Ability to stoop, reach and lift with your body and arms Ability to see details at close range and to identify and distinguish colors Ability to quickly move your hands to grasp, manipulate, or assemble objects Ability to make precisely coordinated movements of the fingers of one or both hands to grasp, manipulate, or assemble very small objects Ability to use hand tools 1st shift positions - Core Hours 7am to 3:30pm

Temp To Full-Time Electronic Assembler needed in Toledo! Looking for somebody to help with assembling glass testing kits. Employee will be working on circuit boards soldering and sauntering. The employee will be assembling different testing kits with different components. Training is provided but prior Electrical Assembly experience required (working on circuit boards). Must submit a resume reflecting prior experience with electrical assembly and soldering. Hours: Monday-Friday 7AM-3:30PM Pay: $15.00 *No felonies and must be able to pass a Drug Screen* ***If you are interested, please apply online and call ************ and ask for DAYNA*** 15.00

Job Title: Electronic Assembler What You'll Do Perform complex assembly operations on electronic components and subassemblies for aerospace and defense systems. Interpret and follow detailed visual aids, engineering drawings, and written instructions to assemble, modify, or rework units. Hand-load and solder PCB assemblies, including fine-pitch components, following IPC-J-STD and IPC-D-610 standards. Identify and repair soldering anomalies, working with both lead and lead-free solder under a microscope. Collaborate with engineering and production teams to drive continuous improvement and implement best practices. Participate in offsite training to maintain industry certifications as required. Actively contribute ideas for process improvement and operational excellence. What You Bring High school diploma or equivalent required. 3-5 years of J-STD soldering experience in a manufacturing environment preferred. Certification to IPC-J-STD and IPC-D-610 standards (or willingness to obtain). Strong mechanical aptitude and ability to identify electronic component values. Working knowledge of ESD prevention and product handling. Excellent interpersonal and communication skills; a self-starter who can plan, execute, and complete tasks independently. Willingness and ability to travel to Hollister, CA up to 75% during the first 90 days for training and onboarding Why Join Us? Mission-Driven Impact: Be part of a team whose products are trusted in the most critical moments-when lives depend on performance. Hyper-Growth Environment: Join a company experiencing rapid expansion, offering stability, prosperity, and the chance to shape the future of aerospace and defense. Culture of Belonging: We foster a community where everyone belongs, voices are heard, and you can be yourself. We promote from within and support both vertical and lateral career growth. Continuous Improvement: Our culture is rooted in learning, innovation, and continuous improvement-both for our products and our people. #LI-CS1

Job OverviewA Mechanical Assembler is responsible for assembling mechanical parts, components and electronic devices utilizing basic assembly tools such as pliers, screwdrivers, soldering iron, etc. in accordance with the work instructions to meet the customer and internally specified requirements. Reading and understanding customer notes, drawings, bills of material and CO-AX work instructions and processes. Using precision measuring tools or equipment (i.e. torque meters, calipers, etc.). Assembling electrical or electronic systems and support structures. Installing and securing components subassemblies, wiring, and attaching plating using rivets, bolts, screws, epoxy, and hot glue. Assemble parts or units, and then position, align, and fasten units to assembly. Use hand or power tools. Attaching name plates and marking identifying information on parts. Examining products or work to verify conformance to specifications. Marking and tagging components so that stock inventory can be tracked and identified. Counting finished product. Maintaining production or work records. Attaching or marking identification onto products and/or containers. Cleaning and maintaining work area and equipment. Comply with company work rules, ESD procedures and Group Leader instructions. Qualifications Profile: Professional demeanor and appearance while working within an ISO 9001 and ISO 13485 environment. Detail oriented and possess excellent organizational, time-management, and interpersonal skills. Ability to work constructively with individuals at all levels of responsibility. Basic computer skills with Word, Excel, PowerPoint. Experience with, or ability to quickly learn collaboration tools such as SharePoint. Education and Experience: A high school education or equivalent. Manufacturing experience and/or willingness to learn the position Familiar with measuring instruments and devices. Familiar with ISO 9001 and ISO 13485 requirements. Previous experience working in an electronic manufacturing environment is desired, but not required #IES1