Paving Equipment Operator
CRH Plc job in Grand Junction, CO
United Companies, is a CRH Company. Our purpose, commitment to the future, and formula for growth is to champion the safety, empowerment, and development of our employees. We strive to be The Preferred Source of quality sand, rock, landscape products, ready-mixed concrete, asphalt, paving and construction services. We succeed as a team by embracing integrity, mutual respect, innovation, service, sustainability, and financial strength.
Position Overview
This is a skilled position involving the safe and efficient operation of various types of construction equipment including but not limited to Loaders, Back Hoes, Track Hoes, Ect.
Wage: $19 to $22 an hour, dependent on experience.
Key Responsibilities (Essential Duties and Functions)
* Operate equipment safely and efficiently.
* Responsible for safe slopes on excavations and proper barricading.
* Locate utilities and other buried lines prior to digging.
* Perform minor servicing and maintenance or refer major problems to the supervisor.
* Knowledge of trenching and shoring standards.
* Keep time and material records.
* Knowledge of aggregate sizes and classifications.
* Knowledge of weight requirements of loads leaving the pit.
* Travel from interstate highway to rural dirt roads from various locations.
* May assist Laborer at various job sites as needed. May perform physical tasks involved with laying pipe and utility lines, and/or tasks involved with road construction and laying asphalt, etc.
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations may be made to enable individuals with disability to perform the essential functions.
Education/Experience
* High school diploma or general education degree (GED) is preferred.
Work Requirements
* Previous heavy equipment operation experience or training is highly preferred.
* Must be 18 years of age or older.
* Must pass pre-employment physical, drug screen and criminal background check.
* Strict adherence to safety requirements and procedures as outlined in the Employee Handbook.
Knowledge/Skill Requirements
* Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence.
* Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
* Ability to apply common sense understanding to carry out detailed, but uninvolved written or oral instructions.
* Ability to work well with others in a group or one on one setting.
Certificates, Licenses, Registrations
* CDL License preferred but not required
Key Competencies
* Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs.
* Teamwork - Contributes to building a positive team spirit.
* Judgment - Exhibits sound and accurate judgment.
* Planning/Organizing - Uses time efficiently.
* Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Accepts responsibility for own actions.
* Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly.
* Adaptability - Adapts to changes in the work environment; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events.
* Attendance/Punctuality - Is consistently at work and on time.
* Dependability - Follows instructions, responds to management direction; Commits to long hours of work when necessary to reach goals.
* Initiative - Asks for and offers help when needed.
* Innovation - Generates suggestions for improving work.
* Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance.
Physical Requirements
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The employee is frequently required to sit, climb, and use hands to signal and handle equipment. The employee is occasionally required to stand, walk, crawl, kneel, bend, and reach with hands and arms above their shoulders. The employee must occasionally lift and/or move anywhere up to 50-75 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision and depth perception.
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; outside weather conditions and vibration. The employee is occasionally exposed to high, precarious places and risk of electrical shock. The noise level in the work environment is usually loud.
The statements included in this job description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job. Other duties may be assigned as required. Requirements for this job are subject to modification by the Company and its designees, and reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
What CRH Offers You
* Highly competitive base pay
* Comprehensive medical, dental and disability benefits programs
* Group retirement savings program
* Health and wellness programs
* A culture that values opportunity for growth, development, and internal promotion
About CRH
CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of large international organization.
If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!
United Companies, a CRH Company, is an Affirmative Action and Equal Opportunity Employer.
EOE/Vet/Disability--If you want to know more, please click on this link.
Date: Nov 17, 2025
Chief Estimator, C&I
Broadview, IL job
About the Role:
The Chief Estimator is responsible for planning, coordinating and directing the Estimating team for various electrical construction projects. This includes administering operating budgets, staffing, work assignments, salary and performance reviews. The Chief Estimator will also support and administer all department standards and procedures as well as be responsible for the final review and approvals of estimate packages. The Chief Estimator will coordinate with the Operations Manager and Division Manager for the selection of projects to pursue.
Company Overview
With roots dating to 1891 and 7,900+ employees, MYR Group is a publicly traded holding company of specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We are contributing to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally.
Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. We are consistently recognized as one of the top five specialty electrical construction firms by Engineering News Record and were recently named to Fortune's 2020 list of 100 Fastest-Growing Companies.
Essential Functions
Take on leadership functions within the Estimating department
Review and evaluate requests for estimates, proposals and/or qualifications
Prepare weekly bid calendar and ensure timely completion of estimates
Review estimates and revisions for completeness and accuracy
Maintain and improve precision database
Develop and maintain cost data, including labor and equipment rates, installation methods and production rates
Develop and maintain estimating procedures and guidelines
Prepare reports as needed
Set departmental budget
Determine constructability requirements
Lead, direct, and audit the work of assigned staff; act as a mentor
Advise staff of company policy expectations
Coordinate employee performance reviews
Develop and maintain relationships with existing and new clients
May develop training requirements for the estimating staff
Regular and predictable attendance
Other duties as assigned
Essential functions of this position are to be performed in a Company-designated office or field location
Understand and comply with the Company's Code of Business Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards
About You:
Qualifications
Previous experience as a Lead or Senior level Estimator
10+ years of experience within the construction industry
Bachelor's degree in Engineering, Construction Management or related field; combination of relevant education and experience considered in lieu of degree
Knowledge/Skills/Abilities
Working knowledge of the N.E.C. and local codes
Proficiency with Microsoft Office applications and estimating software
Team player with excellent analytical, organizational and communication skills
Ability to read and understand civil, architectural, structural, mechanical, etc. plans and specifications to include blueprints, proposals and other documents
What We Offer:
Compensation & Benefits
Compensation commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate.
Two days per week remote work option for non-field roles depending on position and performance.
Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - $15 weekly premium for employee or employee plus family coverage.
Dental - 100% employer-paid premium.
ThrivePass Health & Wellness Reimbursement Program - $250 quarterly, $1,000 annually for health and wellbeing-related purchases.
Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday).
Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential.
Superior educational assistance program (support for educational costs, internal training, and more!).
Company-paid short and long-term disability, life, and accidental death & dismemberment.
Company-paid business travel accident insurance.
Employee Assistance Plan (EAP).
Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents.
Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************.
MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees.
MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer.
MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.
Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS2 LinkedIn Workplace: #LI-Onsite
Auto-ApplyCDL Driver II
Montrose, MN job
US LBM is one of the leading and fastest growing distributors of specialty building materials in the United States, with a team of over 15,000 employees located throughout the country. Since our founding in 2009, we have acquired over 70 companies and have expanded to more than 500 locations serving 37 states. US LBM is a progressive organization that promotes a unique culture that focuses on the value of its customers and associates. Developing our people is critical to our strategy and fostering our culture of empowerment.
Job Posting
A Brief Overview
The CDL Driver II is responsible for the safe, efficient transportation of materials to various job sites and other locations. This role requires maintaining a Class A or B Driver's license, inspecting and maintaining trucks, reporting shortages and claims to supervisors, and assisting in loading and storing of materials. Drivers must perform pre- and post-trip inspections, manage logs, and adhere to hours-of-service requirements. The CDL Driver II is typically a more experienced driver who may train new associates.
What you will do
Operates Class A commercial vehicles in a safe, compliant, and efficient manner.
Responsible for deliveries to both active construction sites and completed build locations; city-based deliveries and inter-state travel may be required.
Performs thorough pre-trip and post-trip DOT inspections to ensure vehicle safety and compliance with federal regulations.
Provides exceptional customer service by maintaining a professional demeanor, addressing client needs, representing the company positively during all interactions, and relaying messages received from customers while on job sites.
Organizes and secures loads to ensure safe transport and verifies orders for accuracy before departure and upon delivery.
Adheres to all regulations and safety guidelines established by the U.S. Department of Transportation (DOT) and complies with all regulations and conditions outlined in applicable permits.
Prepares and maintains accurate DOT-compliant logs of driving hours, on-duty time, and rest periods in accordance with federal regulations.
Delivers and unloads materials accurately and safely, ensuring customer satisfaction at the point of delivery.
Records all merchandise returned by truck and assists in unloading materials returned for credit, ensuring proper documentation and handling.
Safely and efficiently operates a truck-mounted forklift to load, unload, and transport materials at job sites.
Maintains the cleanliness and organization of the truck, ensuring it is well-kept and ready for operation.
Assist with stocking and organizing inventory in the warehouse and production areas.
Trains and mentors incoming drivers on company policies, safety procedures, and operational best practices.
Required For All Jobs
Perform other duties as assigned.
Comply with all policies and standards.
Adheres to Company's commitment to workplace safety.
Education Qualifications
High School or general equivalency degree (GED) required.
Experience Qualifications
3+ years CDL experience preferred.
Experience transporting and handling lumber and building materials required.
Skills and Abilities
Ability to do basic math, read orders, write instructions and complete forms.
Ability to effectively and professionally communicate with customers, other employees and supervisors using verbal and written skills.
Ability to deal constructively with conflict and recognize potential problems.
Maintain current operator's license and meet company driver qualification requirements.
Knowledge and ability to use safe lifting techniques.
Proficiency with or ability to learn current technologies (e.g. Smartphone, GPS and other necessary business applications).
Ability to collaborate effectively with staff, dispatchers, and other drivers to ensure smooth operations and timely deliveries.
Knowledge and understanding of federal DOT regulations, logbook requirements, and HOS compliance.
Skills demonstration: Special product handling, access to tight spaces, residential deliveries, demonstrate proficiency with equipment operations.
Demonstration of leadership (three out of four required):
Mentor new associates
Willingness to train others
Safety committee engagement
Participation in US1 Continuous Improvement project
Licenses and Certifications
Class A CDL License or Class B CDL License required.
Additional Potential Opportunities based on experience:
CDL Driver II
CDL Long haul
CDL Wide Load
CDL Driver Boom Crane
Non-CDL Driver I
Non-CDL Driver II
US LBM Holdings, LLC, is an equal-opportunity employer. We do not discriminate on the basis of race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, gender identity, marital status, military status, order of protection status, or any other legally recognized protected basis under federal, state, or local law.
Field Mechanic
Portland, OR job
About the Role:
The Sr. Field Mechanic with MYR Group you'll travel to project sites across the designated service area, supporting our field teams. You'll use your skills to perform maintenance, preventive maintenance, and minor equipment repairs safely and professionally. Every day, you can improve and challenge yourself, and if you have the desire and ambition, you'll have the potential to work toward higher-level roles in our Fleet Department. Like every team member, we will rely on you to provide exceptional customer service to internal customers.
Location Details:This position will ideally be located in Troutdale, OR.
Travel Details: This position requires travel throughout Northern California, Oregon, and Washington states, (including overnight) to project locations, supporting teams to ensure successful operation of the equipment. At times, the Mechanic will be required to respond to emergencies outside regular work hours and work overtime including weekends and holidays. A company vehicle and fuel card will be provided. When travel is required, meals and lodging will also be provided.
Company Overview
With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally.
Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy.
Essential Functions
Perform mechanic assignments using independent judgment to make decisions requiring the application of procedures and practices to specific work situations
Perform a full range of servicing and repairs on various types of fleet equipment, including malfunctioning parts and systems. Ensure compliance with manufacturer guidelines and company schedules
Frequently travel to customer job sites for repair/maintenance of equipment. Must maintain service vehicle in a clean and professional manner
May provide oversight for less experienced mechanics
Perform routine and preventive maintenance, inspections, and repairs
Identify mechanical problems either visually or with computer diagnostic equipment
Maintain records of time and materials used on each job, the condition of the equipment, and the repairs performed
Track information in computer software; ensure repair orders and weekly timesheets are complete and accurate
Conduct safety inspections of equipment and prepare safety documentation
Work in accordance with DOT, Environmental Protection Agency (EPA), Interstate Authority, Occupational Safety and Health Administration (OSHA), and other rules and regulations as required
Participate in training programs; maintain and update safety skills and knowledge; keep current with hazardous material training requirements
Other duties as assigned
Regular and predictable attendance
Essential functions of this position are to be performed at a Company-designated office or field location
Understand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards
About You:
Qualifications
Must have five years of experience in general heavy truck repair, automotive repair, or equipment repair; equivalent trade school/technical school time may be applied toward this requirement OR have completed a vocational/technical school program or apprenticeship in vehicle and equipment repair and have four years of experience.
Must be capable of operating company vehicles and equipment on a daily basis. Clean Motor Vehicle Record (MVR) and good DAC Report.
A valid Class B Commercial Driver License (CDL) is desired but not required.
Must be at least 18 years of age.
High School Diploma or equivalent preferred but not required.
Knowledge/Skills/Abilities
Must be reliable and have a strong work ethic
Proven ability to work independently and without direct supervision
Good teamwork skills to work effectively with coworkers
Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log
Basic computer or data entry skills
Solid experience using mechanical tools, materials, and testing equipment
Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment
Ability to follow posted safety rules and safe operating procedures
Good understanding of applicable regulatory guidelines and rules
Physical Requirements/Working Conditions
Must be reliable and have a strong work ethic
Proven ability to work independently and without direct supervision
Good teamwork skills to work effectively with coworkers
Ability to communicate effectively to converse with employees, read orders and work instructions, and make accurate entries in the daily log
Basic computer or data entry skills
Solid experience using mechanical tools, materials, and testing equipment
Solid knowledge of design, adjustment, operation, maintenance, and repair of vehicles and equipment
Ability to follow posted safety rules and safe operating procedures
Good understanding of applicable regulatory guidelines and rules
What We Offer:
Compensation & Benefits
Salary $66,560-$83,200 / year
Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate.
Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - $15 weekly premium for employee or employee plus family coverage.
Dental - 100% employer-paid premium.
ThrivePass Health & Wellness Reimbursement Program - $300 quarterly, $1,200 annually for health and wellbeing-related purchases.
Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday).
Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential.
Superior educational assistance program (support for educational costs, internal training, and more!).
Company-paid short and long-term disability, life, and accidental death & dismemberment.
Company-paid business travel accident insurance.
Employee Assistance Plan (EAP).
Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents.
Tool/boot allowance ($250 per quarter).
Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************.
MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees.
MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer.
MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.
Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS1 LinkedIn Location Expansion #: #nw LinkedIn Workplace: #LI-Onsite
Guitar Technician (Luthier) Store 133
Reno, NV job
Pay Rate: $12.00/hr - $18.00/hr plus commission depending on background and experience.
The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations.
POSITION OVERVIEW:
Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.
As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.
A few special characteristics that make our Repair Technicians successful:
Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.
Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.
Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.
Training: Able to effectively train learners and communicate info and techniques so that they are retained.
As our Repair Technician, you will:
Interact with customers, ensuring a positive customer experience
Service customer-owned instruments with a high level of craftsmanship
Maintain store owned gear, as requested
Complete warranty repair work
Additional duties as assigned
Why Guitar Center? Here's just some of the rewards:
For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.
Requirements:
Skilled understanding of repairing Guitars
Preferences:
Foundational product knowledge on Guitar Center products
Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job‐related requirements.
If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1‐************ ext. 2862 or by sending an email to ***************************.
Construction Project Manager - Central MO
Fulton, MO job
SES Construction is seeking a highly motivated and experienced Project Manager/Superintendent to join our team in Fulton, Missouri. This position requires a construction professional with a strong foundation in field operations combined with excellent organizational and digital skills. You will be responsible for overseeing projects from initiation through completion, ensuring quality, safety, and adherence to schedule and budget.
Key Responsibilities
As a Project Manager/Superintendent, your responsibilities will blend on-site leadership with office-based management tasks:
Project Oversight & Management:
Serve as the primary point of contact and authority for assigned projects, ensuring they are completed on time and within budget.
Direct and coordinate all on-site construction activities, including managing subcontractors, suppliers, and SES personnel.
Develop, maintain, and enforce project schedules and work breakdown structures.
Field Supervision & Quality Control:
Maintain a safe, secure, and healthy work environment by enforcing site safety standards and company policies.
Supervise and inspect all work to ensure it meets SES quality standards, project specifications, and local building codes.
Resolve day-to-day issues on the job site quickly and effectively to prevent delays.
Administrative & Computer Skills:
Utilize construction management software (e.g., scheduling, project tracking, and documentation platforms) for daily reporting, progress tracking, and communication.
Manage and process project documentation, including submittals, RFIs (Requests for Information), change orders, and daily logs, leveraging strong computer skills.
Conduct regular project meetings with subcontractors, design teams, and clients.
Financial & Resource Management:
Assist in the preparation of project cost estimates and monitor project costs to identify and mitigate variances.
Coordinate the delivery and storage of necessary materials, tools, and equipment.
Qualifications
Experience: Proven experience in commercial or residential construction, preferably in a combined Project Manager and Superintendent role.
Ideal candidates will have practical experience and a comprehensive understanding of construction methods, techniques, and procedures.
Technical Skills:
Demonstrated proficiency with computer skills and construction management software (e.g., Bluebeam, Ebuilder, etc).
Ability to read, interpret, and work from blueprints, specifications, and project documents.
Knowledge:
Strong understanding of current building codes, safety regulations (OSHA), and quality control standards.
Soft Skills:
Excellent organizational skills with the ability to manage multiple tasks and priorities effectively.
Strong leadership, communication, and interpersonal skills, capable of effectively managing diverse teams and communicating with clients and vendors.
Education:
High School Diploma or GED required; a degree in Construction Management, Engineering, or a related field is a plus.
Auto-ApplyProduction Supervisor (Night Shift)
Cheswick, PA job
This role is not open for submissions from outside staffing agencies
Production Supervisor
(Night Shift 6 PM start)
$75,000-$85,000/year
We are looking for 2nd Shift Production Supervisor to be based at our Pittsburgh, PA location.
The Production Supervisor would monitor and coordinate plant floor activities throughout the shift, keeping on schedule and minimizing back orders. The 2nd shift production crew usually works 8-12 hours. Supervise assigned employees as well as properly train all new hire employees that join the Trulite Team. Ensure that all product that is produced meets the company standards and address any issues that may come up throughout production.
Who You Are:
A qualified candidate would be an individual that believes in our core values of producing top quality product on time for our customers, safely. A true leader that can guide and lead employees into the right direction of success with the company by training and developing personnel. On the floor supervisor that is willing to work side by side with the production team to finish the production goal.
Skills You Bring:
High School Diploma and two (2) year degree preferred
At least five (5) years' experience in an Architectural Glass Manufacturing environment-tempering and fabrication experience preferred
Two (2) years of supervisory experience preferred or training, or equivalent combination of education and experience.
What will you be doing:
Oversee and conduct training for new teams members
Must be able to multi-task, be organized, efficient, accurate and be accountable to job responsibilities
Provide feedback and development of your team
Ability to mentor and coach employees on a one-on-one basis as well as a group
Handle ever changing business environments and departmental need changes
Maintain interdepartmental, general business and customer communication and confidentiality
Performs supervision duties in accordance with the organization's policies and applicable laws.
Responsible for training employees; planning, assigning, and directing work; performance appraisals performance; recognition, rewarding and disciplining employees.
Partners with leadership team and human resources to address complaints and resolve problems.
Why Trulite:
Trulite offers the most comprehensive benefit coverage in the industry. We give our employees immediate access to health, dental, vision and life insurance benefits, as well as provide short/long-term disability coverage to protect you financially if you experience a non-occupational injury.
Stay with us for a year and your 401k employer match is 100% vested and immediately becomes part of your ever improving financial plan. This is also true for those who select and contribute to their Health Savings Account. We match on both employee and family coverage to help cover out-of-pocket expenses and if unused continues to grow until needed. The employer match for your HSA, if you choose to participate, is also vested immediately at 100% improving your financial health.
Trulite bears most of the cost of your benefits. We structured these benefits because we care not only about your physical well-being but your financial health and welfare too. Let us show you why Trulite values you as an employee and how we will help you achieve financial independence.
We are an Equal Opportunity Employer. We embrace and encourage our employees' differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.
Plant Manager
New Berlin, WI job
This role is not open for submissions from outside staffing agencies
Plant Manager
We are actively seeking a Plant Manager for our New Berlin, WI facility. The Plant Manager will direct and manage plant operations with overall responsibilities for Production, Maintenance, Quality, Safety, Inventory and Cost Control, Logistics, and other production-related activities. We are growing at a tremendous rate which presents a fantastic opportunity to join our company and achieve long-term career goals.
WHO YOU ARE:
A Change Management Leader, a Team Builder with a focus on Safety, who is Goal Oriented and has a Servant Leadership work style.
The Plant Manager is responsible for:
Directing and managing plant operations for production, maintenance, quality, and shipping and receiving.
Setting production goals, monitoring, and managing all aspects of production.
Implementing cost effective systems of control over capital, operating expenditures, workforce, wages, and effective use of labor.
Managing capital asset maintenance.
Establishing and monitoring overall plant performance for production and quality standards.
Controlling and minimizing labor overtime, premium freight, and repair expenses.
Maintaining, adjusting, or replacing existing plant facilities and equipment when necessary.
Providing leadership and training to accomplish the company goals and objectives.
Implementing and maintaining preventative maintenance programs.
Incorporating shop floor organization and plant cleanliness processes.
Providing direction, development, and leadership to production supervisors.
Managing and monitoring branch safety conditions to ensure full OSHA compliance and to reduce the incidence of work-related injury to employees.
Communicating regularly with senior management and support functions.
SKILLS YOU BRING:
5 years manufacturing experience with minimum 3 years supervisory experience in a GLASS fabrication environment
Bachelor's degree or combination of education and experience
Business finance acumen and P&L knowledge/experience
Background with manufacturing methods, process improvement programs and procedures including Lean manufacturing techniques required
Must have excellent follow through and communication skills with the ability to prioritize tasks and manage multiple assignments
Production and Capacity Planning Background
WHY CHOOSE US:
We offer the most comprehensive benefit coverage in the industry. We give our employees immediate access to health, dental, vision and life insurance benefits, as well as provide short/long-term disability coverage to protect you financially if injured on the job. We are pleased to offer a comprehensive wellness initiative that includes access to a percentage of your pay daily, if needed, and a progressive financial training program.
Stay with us for a year and your 401k employer match is 100% vested and immediately becomes part of your ever improving financial plan. This is also true for those who select and contribute to their Health Savings Account. We match on both employee and family coverage to help cover out-of-pocket expenses and if unused continues to grow until needed. The employer match for your HSA, if you choose to participate, is also vested immediately at 100%, improving your financial health.
We bear most of the cost of your benefits. We structured these benefits because we care not only about your physical well-being but your financial health and welfare too. Let us show you we value you as an employee and how we will help you achieve financial independence.
We are one of North America's largest fabricator and distributors in our industry, with many facilities throughout the United States and Canada. With its unmatched product line, we have created a Total System Approach to satisfy virtually any customer requirement. We have the products, equipment, and an experienced team to take projects from design concepts with the architect to final installation by the contractor.
We are an Equal Opportunity Employer. We embrace and encourage our employees' differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.
Electrical Construction Project Engineer
Santa Fe Springs, CA job
About the Role:
The Project Engineer will work with an existing project team, involved in current construction projects. The Project Engineer will assist a Project Manager and continue their development under the direction of CSI. Successful candidates must display company core values as found in the CSI Orientation Packet.
Company Overview
Founded in 1990, CSI has emerged as a leader in highly technical and innovative electrical design and construction. We are a full-service firm with the resources and expertise to handle any commercial, industrial, or one-of-a-kind challenge. We are a trusted contractor to diverse industries, such as aerospace, biotech/pharmaceutical, education, healthcare, entertainment, hospitality, manufacturing, and retail, to name a few. Our services also include energy solutions and have earned a reputation as a premier provider of energy development, installation, and maintenance. In July 2019, CSI proudly joined the MYR Group family expanding our commercial and industrial reach. We're proud to celebrate 31 years of commitment to do all things with excellence for our customers, ourselves, and our craft. We Build Better.
Essential Functions
Understand and follow CSI policies and procedures and assist with the following:
Managing document control and drawings
Obtaining necessary permits
Electrical take-offs and project estimating
Preparing submittals and shop drawings, and reviewing quoted items and commodities
Managing RFI logs and reviewing RFIs for cost impact
Managing POs, vendor tracking, and releases
Preparing project budgets for internal tracking and maintaining constant understanding of costs and
budget thresholds
Estimating small jobs and change orders, completing and maintaining change order estimates and
logs, and tracking and pricing EWOs
Working with the lighting department on an as-needed basis to manage light fixtures, controls, and
switchgear tracking logs
Working with the pre-fab department on an as-needed basis
Providing field foremen with information, material tracking, and other administrative functions
Summarizing and tracking time and material paperwork
Taking ownership and accountability for assigned tasks
Managing and tracking subcontractors
Preparing reports and schedule review for Project Reviews
Performing job closeouts and O&Ms
About You:
Qualifications
Estimating experience: Accubid preferred
High School Diploma or the equivalent
AA/BS in Construction Management, Business, or Engineering (or soon to graduate) (*)
Minimum of one year in the electrical construction trade, with a strong knowledge of construction
sequencing, construction methods, and materials practices; including knowledge of electrical systems (*)
LEED AP and OSHA 30 certification desired, but not mandatory
(*) Can be a combination of trade, education, and relevant work experience
Knowledge/Skills/Abilities
Proficiency in MS Office Suite, and BlueBeam
Proactive attitude, showing initiative and the ability to work independently
Ability to read and understand Architectural Structural Mechanical Electrical and Plumbing drawings
Knowledge of, and compliance with, all electrical codes, Local Union Labor Agreements, and State
Compliance Laws/Regulations
Excellent reasoning ability
Strong organizational and communication skills, both written and verbal
Ability to work under pressure and adapt to changing job requirements
Dependability and punctuality for all CSI activities
Ability to work in a team environment and display leadership skills
Positive attitude and customer focus
Physical Demands
Frequently works outdoors on uneven surfaces.
May be required to sit or stand for long periods of time.
May be required to stoop, bend, and crouch.
Work Environment
Works in a climate controlled environment 50% of the time.
May work in varying weather conditions: hot, cold, and wet conditions.
Frequently works in areas with large industrial equipment subject to high noise levels.
May occasionally work in areas with hazardous chemicals.
What We Offer:
Compensation & Benefits
Hourly Rate $24.04-$36.06/ hour (Non-Exempt)
Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. CSI reserves the right to adjust ranges depending on the selected candidate's qualifications.
Amazing Company Culture - We have a culture of trust, teamwork, performance, and commitment that drives our success.
Competitive Salaries - We pride ourselves on offering above-average industry salaries based on talent and experience.
Annual Paid Time Off starting at 15 days plus 9 paid Holidays.
Generous 401(k) Plan with 100% match up to 6%. Immediate vesting and Annual profit-sharing potential.
Company-paid life, and accidental death & dismemberment.
Employee Assistance Plan (EAP).
Various voluntary plans are available, including short- and long-term disability, supplemental vision, accident, hospital and critical illness, and additional voluntary life insurance plans for employees and dependents.
Company medical and dental insurance for you and your family. CSI pays 100% for Employee and 75% of dependent coverage premium for the selected plan(s)
Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************.
MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees.
MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer.
MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.
Appcast: #applow LinkedIn Workplace: #LI-Onsite
Clinical Reimbursement Coordinator, RN
High Point, NC job
Overview: At Genesis Healthcare, we are dedicated to improving the lives we touch through the delivery of high-quality care and exceptional service. As a leading provider in the long-term care industry, we believe in fostering a collaborative, inclusive and supportive work environment where every team member is valued and empowered to make a difference. Whether you're an experienced professional or just starting your career, we offer opportunities for growth, development, and advancement in a range of roles. Join us in our mission to enhance the well-being of our patients and residents while making a meaningful impact in the communities we serve. Responsibilities: The MDS Coordinator - RN is responsible for the timely and accurate completion of the MDS treatment assessment tool and for reviewing care plans and their delivery for factors specific to our patients/residents such as physical, cognitive, and socialization factors to ensure compliance with our high standards of care. *Manage the overall process and tracking of all Medicare/Medicaid case-mix documents to assure appropriate reimbursement for services provided within the nursing center.*Conduct concurrent MDS reviews to assure achievement of maximum allowable RUG categories.*Integrate information from nursing, dietary, social services, restorative, rehabilitation, and physician services to ensure appropriate reimbursement. Qualifications: *Must be a graduate of an accredited School of Nursing with current Registered Nurse (RN) licensure. LPNs with MDS experience may be considered.*At least one year of long-term care nursing experience is required. Benefits:
*Variable compensation plans
*Tuition, Travel, and Wireless Service Discounts
*Employee Assistance Program to support mental health
*Employee Foundation to financially assist through unforeseen hardships
*Health, Dental, Vision, Company-paid life insurance, 401K, Paid Time Off
*Free 24/7 virtual health care provided by licensed doctors for all Anthem medically-enrolled employees and their immediate family members
*On-Demand Pay Program that allows for instant access to a portion of the money you've already earned
We also offer several voluntary insurances such as:
*Pet Insurance
*Term and Whole Life Insurance
*Short-term Disability
*Hospital Indemnity
*Personal Accident
*Critical Illness
*Cancer Coverage
Restrictions apply based on collective bargaining agreements, applicable state law and factors such as pay classification, job grade, location, and length of service.
Posted Salary Range: USD $85,000.00 - USD $100,000.00 /Yr.
Auto-ApplyStaff Development Coordinator, RN
Milford, NH job
Overview: 32 hour/week position - On Call Required At Genesis Healthcare, we are dedicated to improving the lives we touch through the delivery of high-quality care and exceptional service. As a leading provider in the long-term care industry, we believe in fostering a collaborative, inclusive and supportive work environment where every team member is valued and empowered to make a difference. Whether you're an experienced professional or just starting your career, we offer opportunities for growth, development, and advancement in a range of roles. Join us in our mission to enhance the well-being of our patients and residents while making a meaningful impact in the communities we serve. Responsibilities: The primary function of the Nurse Educator is to orient and educate all nursing personnel in the nursing center and to ensure safe effective nursing care according to the federal, state, and facility guidelines, policies and procedures.
*Report to the Director of Nursing
*Develop education programs in response to staff needs and teach staff current accepted patient care and nursing center practices.
*Supervise and monitor new nursing employees throughout their individualized orientation period.
*Perform annual competency testing and evaluation and clinically appraise nursing staff performance to identify areas for education.
*Provide oversight to Employee Health Program to include administering and tracking of tuberculosis and hepatitis vaccine and tracking of influenza immunizations for all employees. Qualifications:
*Must be a graduate of an accredited School of Nursing with current RN license
* Minimum three years full-time or equivalent clinical experience preferred
* Two years of clinical experience in long-term care nursing with one year as an educator preferred
* Excellence in clinical nursing skills required
* Experience in Gerontology preferred
* Training and/or experience in adult learning preferred
Benefits: *Variable compensation plans
*Tuition, Travel, and Wireless Service Discounts
*Employee Assistance Program to support mental health
*Employee Foundation to financially assist through unforeseen hardships
*Health, Dental, Vision, Company-paid life insurance, 401K, Paid Time Off We also offer several voluntary insurances such as:
*Pet Insurance
*Term and Whole Life Insurance
*Short-term Disability
*Hospital Indemnity
*Personal Accident
*Critical Illness
*Cancer Coverage Restrictions apply based on collective bargaining agreements, applicable state law and factors such as pay classification, job grade, location, and length of service.Posted Salary Range: USD $76,500.00 - USD $84,000.00 /Yr.
Auto-ApplyElectrical Construction Management - Assistant Project Manager
San Jose, CA job
About the Role:
The Assistant Project Manager will work with an existing project team, involved in current construction projects. The Assistant Project Manager will assist a Project Manager and continue their development under the direction of CSI. Successful candidates must have a minimum of three years of experience as a Project Engineer and display company core values as found in the CSI Orientation Packet.
Company Overview
Founded in 1990, CSI has emerged as a leader in highly technical and innovative electrical design and construction. We are a full-service firm with the resources and expertise to handle any commercial, industrial, or one-of-a-kind challenge. We are a trusted contractor to diverse industries, such as aerospace, biotech/pharmaceutical, education, healthcare, entertainment, hospitality, manufacturing, and retail, to name a few. Our services also include energy solutions and have earned a reputation as a premier provider of energy development, installation, and maintenance. In July 2019, CSI proudly joined the MYR Group family expanding our commercial and industrial reach. We're proud to celebrate 31 years of commitment to do all things with excellence for our customers, ourselves, and our craft. We Build Better.
Essential Functions
Understand and follow CSI policies and procedures
Manage/direct Subcontractors, CSI field personnel and/or other CSI employees (Project Engineers,
Groups Administrators, and Interns) as needed
Manage document control and drawings
Prepare submittals and shop drawings, and review quoted items and commodities
Compose CSI RFIs, manage RFI logs, and review RFIs for cost impact
Manage POs, vendor tracking, and releases
Prepare project budgets for internal tracking and maintain constant understanding of costs and budget
thresholds
Assist with electrical take-offs and project estimating of large jobs
Estimate small jobs and change orders and complete and maintain change order estimates and CO
logs, and track and price EWOs
Work with the lighting department on an as-needed basis to manage light fixtures, controls, and
switchgear tracking logs
Work with the pre-fab department on an as-needed basis
Provide field foremen with information, material tracking, and other administrative functions
Summarize and track time and material paperwork
Take ownership and accountability for assigned tasks
Manage and track subcontracts
Assist Project Manager(s) with reports and job schedule review
Perform job closeouts and O&Ms
The preceding functions have been provided as examples of the types of work performed by employeesassigned to this job classification. Management reserves the right to add, modify, change, or rescind workassignments and to make reasonable accommodations as needed. This position is classified as exempt meaning more than 50% of the employee's time is spent performing exemptjob duties consistent with this job description. If the employee finds the actual job duties change from thosedescribed herein, so the employee is not performing exempt duties more than 50% of the time, the employeemust immediately inform management. About You:
Qualifications
High School Diploma or the equivalent
AA/BS in Construction Management, Business, or Engineering (or soon to graduate) (*)
Minimum of three years in the electrical construction trade, with a strong knowledge of construction
sequencing, construction methods, and materials practices; including knowledge of electrical systems (*)
LEED AP and OSHA 30 certification desired, but not mandatory
(*) Can be a combination of trade, education, and relevant work experience
Knowledge/Skills/Abilities
Estimating experience: Accubid preferred
Proficiency in MS Office Suite, BlueBeam, and understanding of AutoCAD and Revit
Proactive attitude, showing initiative and the ability to work independently
Ability to read and understand Architectural, Structural, Mechanical, Electrical, and Plumbing drawings
Knowledge of, and compliance with, all electrical codes, Local Union Labor Agreements, and State
Compliance Laws/Regulations
Ability to take ownership and accountability
Excellent reasoning ability
Strong organizational and communication skills, both written and verbal
Ability to work under pressure and adapt to changing job requirements
Dependability and punctuality for all CSI activities
Ability to work in a team environment and display leadership skills
Positive attitude and customer focus
Physical Demands
Frequently works outdoors on uneven surfaces.
May be required to sit or stand for long periods of time.
May be required to stoop, bend, and crouch.
Work Environment
Works in a climate controlled environment 50% of the time.
May work in varying weather conditions: hot, cold, and wet conditions.
Frequently works in areas with large industrial equipment subject to high noise levels.
May occasionally work in areas with hazardous chemicals.
What We Offer:
Compensation & Benefits
Salary $70,000-$125,000 / year
Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate.
Amazing Company Culture - We have a culture of trust, teamwork, performance, and commitment that drives our success.
Competitive Salaries - We pride ourselves on offering above-average industry salaries based on talent and experience.
Annual Paid Time Off starting at 15 days plus 9 paid Holidays.
Generous 401(k) Plan with 100% match up to 6%. Immediate vesting and Annual profit-sharing potential.
Company-paid life, and accidental death & dismemberment.
Employee Assistance Plan (EAP).
Various voluntary plans are available, including short- and long-term disability, supplemental vision, accident, hospital and critical illness, and additional voluntary life insurance plans for employees and dependents.
Company medical and dental insurance for you and your family. CSI pays 100% for Employee and 75% of dependent coverage premium for the selected plan(s)
Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************.
MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees.
MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer.
MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team.
Appcast: #applow LinkedIn Workplace: #LI-Onsite
Class A Driver
New Berlin, WI job
This role is not open for submissions from outside staffing agencies
CDL A Driver
What Brought You Here:
Pay $27-$29/hour or more depending on experience
Weekly pay
Quarterly safety bonus opportunities
Shift days and hours-The position is M-F. Hours vary depending on daily route.
LOCATED at- 5700 S Moorland Rd. New Berlin, WI
Benefits starting DAY ONE!
Earn additional pay based on individual and team performance with our Monthly Production Incentive Compensation Program!
Who You Are:
Someone with previous over the road experience.
Familiar with pre and post trip inspections and using online log system
What You Will Be Doing:
Performs pre-trip and post-trip vehicle inspections.
Complies with all required statutory, regulatory requirements, and company policy.
Completes appropriate paperwork and forms, including but not limited to manifest, shipping and receiving documents.
Maintain all required certifications required by DOT and OSHA and company safety programs.
Loading and unloading of all finished goods and raw ingredients. Secure load during transit, including blocking and bracing.
Driver must be able to utilize and/or learn the computerized system order to complete all transactions of shipments.
Secure load during transit, including blocking and bracing.
Drives truck with capacity of more than 3 tons, transporting materials to and from specified destinations.
Distributes receipts for loads picked up.
Occasionally collects payment for goods delivered and for delivery charges.
Maintains telephone and/or radio contact with supervisor to receive delivery instructions.
Assists Customers with the offloading process.
Positions blocks and ties rope around items to secure cargo during transit.
Communicates with customers, supervisors, and other employees effectively.
Uses good judgment in making decisions, in emergency and routine situations.
Skills You Bring:
Current/Active CDL Class A License Minimum two years of experience
after
CDL school
Must pass Driver's Testing
Must pass DOT Physical (M.E.C.) / Drug Testing (DOT)
Must be proficient in the English language
Basic math to understand product weight and truck limits
Reasoning ability; must be able to solve practical problems and follow instructions.
Why Trulite:
Trulite offers the most comprehensive benefit coverage in the industry. We give our employees immediate access to health, dental, vision and life insurance benefits, as well as provide short/long-term disability coverage to protect you financially if you should incur a non-occupational illness or accident.
We are pleased to offer a comprehensive wellness initiative that includes access to a progressive financial training program.
Stay with us for a year and your 401k employer match is 100% vested and immediately becomes part of your ever improving financial plan. This is also true for those who select and contribute to their Health Savings Account. We match on both employee and family coverage to help cover out-of-pocket expenses and if unused continues to grow until needed. The employer match for your HSA, if you choose to participate, is also vested immediately at 100%, improving your financial health.
Trulite bears most of the cost of your benefits. We structured these benefits because we care not only about your physical well-being but your financial health and welfare too. Let us show you why Trulite values you as an employee and how we will help you achieve financial independence.
We are an Equal Opportunity Employer. We embrace and encourage our employees' differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.
Cook 3 - Knott's Hotel
Buena Park, CA job
$21.00 / hour
Cook 3 is responsible for preparing menu items in accordance with recipes and production procedures.
Age requirement: 18+
Are you looking for a fun and rewarding job? Interested in meeting people from all over and gaining skills that will last a lifetime? Then Knott's Berry Farm is the place for you!
Working at Knott's Berry Farm, you will have access to these amazing perks:
Complimentary admission to Knott's Berry Farm
Earn complimentary tickets for your friends and family
Discounts on food and merchandise
Special events for associates only
Building lifelong friendships
Resume building skills
Flexible schedule
Employee recognition programs
Responsibilities:
Ensure that high standards of food quality are maintained.
Achieve the budgeted food cost by complying with portion controls.
Provide guest service according to Knott's Berry Farm standards.
Adhere to Knott's Berry Farm costuming and grooming standards.
Adhere to Knott's Berry Farm Rules of Conduct.
Conduct cash handling transactions, including making change and accepting payment.
Maintain cleanliness and safety in assigned work area.
Report all unsafe or unusual conditions to supervision.
Ensure a high standard of quality food products served.
Ensure safety and sanitation of entire complex through use of a safety program. Follow through on Front of House and Back of House checklist, inspections, and heightened awareness for optimum working conditions.
Ensure all production needs are met for area of responsibility. Monitor all operations, paperwork and related aspects for optimum efficiency and production.
Use knowledge of equipment, manuals, and maintenance feedback to keep equipment up and running.
Develop specials and update regularly all menu specifications. Monitor portions, presentation, and any food development issues.
Be available as a source of knowledge and facts relating to all restaurant operations, procedures, laws, policies, and/or emergency issues. Through consultation via phone or in person to assist supervision as necessary.
Qualifications:
High School diploma or GED required.
At least 2 years experience in a culinary position.
Must be able to work nights, weekends, and holidays based on business needs.
Ability to work effectively and achieve department goals under time constraints and quality pressures.
Ability to work with little or no direct supervision.
Ability to take initiative to accomplish daily work tasks.
Ability to accurately compile reports from information provided.
Ability to maintain composure during high-pressure situations.
Auto-ApplyAttorney HEMPHILL EXCLUSIVE Hemphill is helping an impressive mid-sized company with headquarters in Lincoln, and a national footprint hire their first in-house attorney. This highly profitable growth company is experiencing accelerated growth so they are hiring an attorney to focus on their contracts with clients and sub-contractors. In this position, you will report to the President while working closely with clients, the client's attorney, subcontractors, vendors, joint venture partners, and outside counsel if needed.
The main focus of this position will focus on the following:
- Review each client contract & MSA to identify risk, exposure, indemnification, limits to liability, performance guarantees, deliverables, pricing, payment terms, and all other key points then work with the President and client or their attorney to negotiate mutually agreeable terms.
- Work closely with the President while negotiating contract terms and structure that reduces risk while optimizing the company's position.
- Negotiate contracts with subcontractors and vendors that minimizes risk and positions the company favorably.
- Work closely with the President while negotiating Joint venture partner agreements.
- Once contracts are fully executed, abstract the contract to highlight the most important terms, clauses, and obligations. Work with the accounting and operations teams to ensure all are aware of the most important elements of the contract.
- Provide oversight while making sure the company is in compliance with all contracts.
As a key member of this mid-sized growth company, you will be at the table contributing to the growth and continued success of this dynamic firm! Enjoy an excellent culture where the focus is doing the right thing and working collaboratively as a team to drive the company to its full potential. This is a very attractive position within an excellent company! You will enjoy an excellent compensation package including base salary, annual bonus, and a rich benefit package. The best part of this job is the team of co-workers you get to work with each day!
To learn more about this opportunity on a confidential basis call Todd Luther at ************ \*222 or send an e-mail to ************************** to learn more. Job # 9565TL
The Right Match - The First Time
Your Confidentiality is Our Priority; Hemphill will NOT Forward Your Resume Without Your Approval.
To see all Hemphill job postings go to **********************
Hemphill Voted - *“Best Employment Firm” *by Omaha's Business Leaders & _B2B_ Magazine in *2008, 2009,* *2010, 2011, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024 & 2025!*
\*\*\*Never a fee to our applicant\*\*\*
Job Type: Full-time
Pay: $75,000.00 - $85,000.00 per year
Benefits:
* 401(k) matching
* Dental insurance
* Health insurance
* Life insurance
* Vision insurance
Work Location: In person
Guitar Technician (Luthier) Store 764
Fayetteville, GA job
Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.
As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.
A few special characteristics that make our Repair Technicians successful:
Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.
Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.
Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.
Training: Able to effectively train learners and communicate info and techniques so that they are retained.
As our Repair Technician, you will:
Interact with customers, ensuring a positive customer experience
Service customer-owned instruments with a high level of craftsmanship
Maintain store owned gear, as requested
Complete warranty repair work
Additional duties as assigned
Why Guitar Center? Here's just some of the rewards:
For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.
Requirements:
Skilled understanding of repairing Guitars
Preferences:
Foundational product knowledge on Guitar Center products
Guitar Center is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job-related requirements.
If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling ************** ext. 2862 or by sending an email to ***************************.
KOHLER Store Sales Consultant - Kitchen & Bath
Fort Lauderdale, FL job
Wool Plumbing Supply & Kohler are seeking Design Sales Consultants for our new Fort Lauderdale location.
Join the Kohler Store team as a Design Sales Consultant! In this exciting role, you will be tasked with specifying kitchen and bath faucets, lighting, tile, and fixtures in a luxury showroom setting. Products offered include Kohler's expansive portfolio of brands, including both Kohler and Kallista brands. Kohler is the largest kitchen and bath brand in the world.
This sales-based, results driven position relies heavily on design-influence with the opportunity to work with walk-in homeowners and appointment based trade partners, including top interior designers and members of the trade community. (Approximately 90% sales, 10% design). The consultant will be responsible for driving top-line sales through the consistent achievement of personal sales targets and goals.
Compensation consists of a moderate base wage in conjunction with an open-ended commission and bonus structure. Due to the commission component, the total compensation range may vary depending upon the performance, success, and tenure of the sales consultant.
Key duties of the position include:
-Leverage Salesforce to manage customer relationships, interactions, leads and opportunities to demonstrate an accurate pipeline.
-Develop new relationships and business for Kohler to meet and exceed sales goals.
-Conduct daily follow up with customers, quotes and leads to generate and close business.
-Engage in strategic outreach to develop and grow the client base.
-Network with the professional trade through involvement in associations, meetings and events; including in-store events.
How To Apply
Apply directly through LinkedIn, and you may also email your resume to *********************** with the subject "Kohler Store".
Daily tasks may include:
-Drive sales to meet and exceed individual and team sales plans:
-Provide high quality customer service to scheduled appointments and walk-in traffic.
-Conduct daily follow-up on outstanding quotes.
-Develop and execute marketing plans to current and potential customer base.
-Participate in planning and execution of in-store events.
-Understands how to win as a team and brings forth a team mentality.
-Develop repeat sales, new relationships, and future business.
-Create a strategic sales plan and detailed tracking of customer interactions, quotes, and opportunities.
-Conduct outside sales calls, with a focus on targeted top-selling and high-potential accounts, marketing new and featured products.
-Follow up on leads to generate new business.
-Network with the professional trade through involvement in associations, meetings and events.
-Deliver exceptional customer service.
-Provide prompt and friendly service to every customer that walks into the store.
-Follow up on all sales to ensure customer satisfaction and service are met.
-Maintain a well-organized and aesthetically pleasing environment.
-Drives repeat customers by going above and beyond to connect with customers in a meaningful and personal way.
-Administer sales process to ensure timely and accurate completion of all sales:
-Process quotes and sales paperwork.
-Partner with Kohler Customer Care team to track orders for customers and ensure quality service.
-Continually develop sales skills and product knowledge:
-Develop detailed knowledge of all product lines and features.
-Participate in training activities, including product knowledge presentations and online learning, to supplement product knowledge.
-Complete training courses to continually develop and hone presentation, negotiation, and sales skills.
Skills/Requirements
Minimum of 3 years prior sales experience required, in a high-end sales / service industry preferred. A track record of consistently meeting or exceeding sales goals required. Strong preference given to prior sales experience in interior or architectural design or luxury retail sales. Candidates must be capable of creating and communicating product and / or design solutions in a timely manner and articulate why to buy from Kohler Stores.
Why Work at The Kohler Store by Wool Supply?
Kohler Co.'s mission is to contribute to a higher level of gracious living for those who are touched by our products and services. We understand that it takes investment in our associates' development to make that happen. So, we offer ongoing investment in each individual's personal development and the opportunity to collaborate with others across functions and roles at Kohler. In addition to the investment in your development, Wool Supply offers a benefits package including a competitive salary, health insurance, 401(k) with company matching, and a generous vacation policy!
About Us
Founded in 1873 and headquartered in Kohler, Wisconsin, Kohler is one of America's oldest and largest privately held companies. With more than 50 manufacturing locations worldwide, Kohler is a global leader in the design, innovation and manufacture of kitchen and bath products; engines and power systems; luxury cabinetry and tile; and owner/operator of two of the world's finest five-star hospitality and golf resort destinations in Kohler, Wisconsin, and St. Andrews, Scotland. For additional details, please visit kohler.com.
Beyond the competitive benefits and compensation, Wool Supply proudly offers a rich history of a local, multi-generational family business local to the South Florida community. The Kohler Store is owned and operated by Wool Supply. Wool Supply is a privately held, family owned South Florida business. Please visit woolsupply.com and woolkb.com to find out more about the company, and kohler.com, robern.com, annsacks.com, and kallista.com to learn more about the products featured in the store.
Interior Designer Assistant - Custom Homes
Houston, TX job
Are you proactive, driven to be accurate, and an amiable communicator? Once you have identified your area(s) of expertise, do you excel in the knowledge of those subjects? Would those who know you well say that you tend to be more book smart than street smart, and that you can become relentless in the pursuit of factual information? Is your communication style reasonably social and full of data? Do you hate being wrong and tend to err on the side of caution to avoid failure?
If you are interested in this position, start by copying this link into your browser and completing the required survey: ********************************************
Job Overview:
Support the Interior Designer by assisting with administrative and coordination tasks related to client design selections, meetings, and documentation. This position is ideal for someone passionate about residential design who wants to learn the full custom home interior design process from the ground up. Under the guidance of an experienced Interior Designer, this role will help ensure client meetings, selection sheets, and design center operations run smoothly and efficiently.
Primary Responsibilities:
Work with Interior Designer and learn how to guide a buyer throughout the selection process.
Assist with any reselections needed for discontinued products.
Maintain a welcoming, organized design center environment - ensure samples, options, and displays are clean, labeled, and up to date.
Support the design team in preparing for homeowner meetings, including printing selection sheets, gathering samples, and setting up meeting spaces.
Assist with updating and organizing selection sheets, color photos, and redline drawings.
Input and track design selections and pricing requests (PRs) in the system.
Help organize and file final homeowner documents, cabinet layouts, and countertop recommendations.
Prepare and maintain “audit-ready” design files.
Support change order updates as directed by the Interior Designer.
Update design center displays, samples, and option-level materials.
Communicate with vendors and internal departments (Purchasing, Sales, Construction) to assist in tracking or updating design-related information.
Attend occasional client meetings to observe and learn the design selection process.
Any other Interior Design Assistant duties and responsibilities as assigned.
Required Skills & Knowledge:
Organization: Strong attention to detail and ability to manage multiple administrative tasks accurately and efficiently.
Communication: Excellent written and verbal communication skills; able to relay information clearly to clients and team members.
Technology: Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook); familiarity with design software (AutoCAD, Revit, Chief Architect, or similar) a plus.
Teamwork: Willingness to learn and support other team members; takes direction well and works collaboratively.
Time Management: Ability to prioritize and complete tasks within deadlines in a fast-paced, client-facing environment.
Professionalism: Reliable, punctual, and represents Design Tech Homes' values and customer experience standards.
Position Goals:
This role is designed to provide hands-on exposure to the custom home design process. Over time, and with training, the Interior Designer Assistant will advance toward leading client color selection meetings and managing design projects independently.
Job Type: Full-time
Benefits:
401(k)
Dental insurance
Health insurance
Health savings account
Life insurance
Paid time off
Vision insurance
Education:
Associate (Required)
Experience:
Interior Design: 2 Years (Required)
Ability to Commute:
The Woodlands, TX 77380 (Required)
Work Location: In person
Billing Coordinator
Union, IL job
INTREN, Inc. Job Description
Job Title: Billing Coordinator
Reports To: Project Manager
FLSA Status: Non-Exempt
The primary responsibility for this position is to support billing functions and ensure billing is submitted in a timely fashion.
ESSENTIAL FUNCTIONS:
Familiar with all aspects of client billing, including client specific billing requirements and guidelines; communicates changes to department/billing coordinators.
Provides feedback on improving Billing process internally via internal protocols and maintain current written procedures manual.
Collaborates with other administrative departments, as necessary, to discuss billing guidelines and processes.
Prepares bills as assigned; maintains paper and electronic organized records. Prepares all bills in accordance with established policies, procedures and timelines.
Provides complete administrative support in the production and delivery of bills, including transmittal documents, PDF assembly.
Communicates and follows instructions effectively from a diverse group of clients, attorneys and staff. Provides information in person, via email or by phone with courtesy and professionalism.
Follows up with appropriate parties to communicate billing status.
Troubleshoots and communicates issues with billing; coordinates with the Data Processing and Accounting departments.
Periodically handle tasks from the Controller and Director of Support Services.
Keeps Supervisor informed of the status of billing work; maintains a calendar of billing deadlines; prepares bills in advance of due dates.
Performs other duties as needed.
DESIRED MINIMUM QUALIFICATIONS:
Requires effective oral and written communication skills, excellent interpersonal skills and strong computer literacy. Good problem-solving skills and the ability to multi-task are essential. Must be a self-starter and have the ability to organize and prioritize work.
Minimum of two years billing experience in a self-starter environment required.
Proficient in Microsoft Office applications, specifically Excel and Word.
Excellent interpersonal skills.
Self-motivated, pro-active and responsible individual able to work under minimal supervision.
Good written and oral communication skills and ability to self-edit documents.
Highly organized with strong attention to detail.
Teamwork oriented individual.
Ability to complete projects within required time frame.
Ability to organize and prioritize numerous tasks and complete them under time constraints.
Intren is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.
Mobile Mechanic
CRH Plc job in Grand Junction, CO
United Companies, is a CRH Company. Our purpose, commitment to the future, and formula for growth is to champion the safety, empowerment, and development of our employees. We strive to be The Preferred Source of quality sand, rock, landscape products, ready-mixed concrete, asphalt, paving and construction services. We succeed as a team by embracing integrity, mutual respect, innovation, service, sustainability, and financial strength.
Position Overview
This position is responsible for repairs and maintains construction equipment and mechanical equipment such as trucks, trailers, batch plants, paving machines, bulldozers, engines, motors, pneumatic tools, conveyor systems, and other equipment by performing the following duties.
Wage Range: $22 to $26 per hour based on experience
Essential Duties and Responsibilities
* Troubleshoots problems, making economical and durable repairs.
* Dismantles devices to gain access to and remove defective parts using hoists and hand tools.
* Maintains and repairs heavy equipment, trucks, shop, and non-mobile equipment on a company-wide basis.
* Services vehicles/equipment to include oil changes, greasing, adding fluids, changing filters and maintaining preventative maintenance schedules.
* Troubleshoots and repairs electrical and hydraulic systems, diesel and gasoline engines, transmissions, drive trains, etc.
* Orders parts and supplies. Maintains purchase orders and invoices. Operates computer for job functions.
* Adjusts functional parts of devices and control instruments.
* Repairs or replaces defective parts.
* Installs special functional and structural parts in devices.
* Starts devices to test their performance.
* Welds broken parts and structural members.
* Maintains a clean and organized work area.
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations may be made to enable individuals with disability to perform the essential functions.
Education and/or Experience
* High school diploma or general education degree (GED) preferred;
* five years or more of related experience
* CDL Class A or B is required
Language Skills
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
Mathematical Skills
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Reasoning Ability
Ability to apply common sense understanding to carry out detailed, but uninvolved written or oral instructions
Ability to work well with others in a group or one on one setting.
Computer Skills
To perform this job successfully, an individual should be able to type and use keyboards accurately and have knowledge of Database software.
Physical Demands
* The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
* The employee is frequently required to sit, climb, and use hands to signal and handle equipment. The employee is occasionally required to stand, walk, crawl, kneel, bend, and reach with hands and arms above their shoulders. The employee must occasionally lift and/or move anywhere up to 50-75 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision and depth perception.
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; outside weather conditions; and extreme cold and/or heat. The noise level in the work environment is usually moderate to loud.
Other Qualifications
May be subject to drug testing, medical exams and physical agilities testing.
What CRH Americas Offers You
* A culture that values opportunity for growth, development and internal promotion
* Highly competitive base pay
* Comprehensive medical, dental and disability benefits programs
* Group retirement savings program
* Health and wellness programs
About CRH Americas
CRH Americas has a long and proud heritage as one of North America's largest corporations. We are a proud reflection of the hundreds of family businesses, local and regional companies and mid to large sized enterprises that together form the CRH Americas family. CRH Americas operates with a decentralized, diversified structure, letting you work in a small company environment while having the career opportunities of a large enterprise.
CRH Americas is a great place to grow! If you're up for a rewarding challenge, we invite you to take the first step and apply today! Please complete your online application and profile which will be sent directly to the appropriate Hiring Manager. Thank you for your interest in the CRH Americas family!
United Companies is an Affirmative Action and Equal Opportunity Employer.
EOE/Vet/Disability--If you want to know more, please click on this link.
Date: Nov 5, 2025