Post job

Mechanic jobs at Oldcastle Infrastructure - 2621 jobs

  • Concrete Heavy Equipment Mechanic

    CRH 4.3company rating

    Mechanic job at Oldcastle Infrastructure

    The Shelly Company, a CRH company, is a vertically integrated supplier of aggregates, asphalt, ready mix concrete and paving services throughout the state of Ohio. Our commitment to quality drives us to use the most modern, efficient and environmentally friendly technology in our industry. The Shelly Company is known throughout the industry for innovation, quality and for our commitment to safety. Starting at $30 per hour, plus overtime. Position Overview Drives from one destination to another to repair and maintain machinery and equipment under direction of Shop Foreperson. Class 8 mechanic. Key Responsibilities (Essential Duties and Functions) The duties and responsibilities include but are not limited to the following: Drives a mechanics truck to various job sites and plants to repair machinery and equipment. Works extended, and at times, erratic hours. Adhere to the Federal Motor Carrier Safety Regulations as set forth by the US Department of Transportation. Trouble shoot and maintain all types of heavy equipment, including but not limited to fork lifts and ready mix trucks. Examines equipment and discusses with Shop Foreperson nature and extent of damage or malfunction. Plans work procedure and/or possible solutions for issues Raises equipment, with hydraulic jack, hoist or crane, to gain access to mechanical units bolted to underside of equipment. Removes units or pieces such as engines, transmissions, drums, seals, etc. Repairs or replaces parts such as drums, seals, buckets, hydraulic pumps, electric motors, valves, pistons, rods, gears, etc. Rewires ignition system, lights, and instrument panel. Drains fluid and oil, ensuring proper procedures for containment and/or disposal. Devises, fabricates, and assembles new or modified mechanical components or assemblies for products such as industrial equipment and machinery. Required to provide your own basic hand tools. Required to keep and maintain a clean and safe work environment, shops, mechanics truck etc. Must be self-motivated and able to plan for future needs. Maintain positive proactive outlook. Other Requirements: Display a professional and courteous attitude to co-workers, supervisors, and the general public at all times. Must be willing to travel and work away from home when required. Must be willing to work nights and weekends when necessary. Report to the assigned job site ready to begin work at the designated start time. Strict adherence to safety requirements and procedures as outlined in the Manual of Safety Practices and Procedures. Strict adherence to Shelly Company policies and procedures as outlined in the Company Book of Policies. Willingness to work in a team environment and assist co-workers or supervisors with other duties as required. Timely and regular attendance is an expectation of performance for all Shelly Company employees. Employees will be held accountable for adhering to their workplace schedule. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Education and Experience One year certificate from college or technical school; or three to six months related experience and/or training; or equivalent combination of education and experience. Basic computer skills preferred. CDL is preferred. Language Skills Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to speak effectively to customers or employees of organization. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee frequently is required to climb or balance. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. Specific vision abilities required by this job include distance vision, peripheral vision, and depth perception. The employee must regularly lift and/or move more than 100 pounds. Specific vision abilities required by this job include distance vision, peripheral vision, and depth perception. Must be able to bend, kneel, squat, walk, stand, reach and drive. The employee must occasionally be able to climb, sit, use fine motor skills and use repetitive motion. This position requires an employee to lift up to 25lbs. This position requires an employee to occasionally lift up to 100lbs. Work Environment While performing the duties of this job, the employee regularly works near moving mechanical parts and in outside weather conditions and is regularly exposed to wet, humid condition airborne particles, and extreme heat or cold. The employee is occasionally exposed to vibration. The noise level in the work environment is occasionally very loud and may require protective equipment. Working conditions can occasionally include: hot weather, cold weather, wet weather, exposure to high heat and exposure to noise. The employee must be able to work with others and moving equipment. The statements included in this job description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job. Other duties may be assigned as required. Requirements for this job are subject to modification by the Company and its designees, and reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. What CRH Offers You Highly competitive base pay Comprehensive medical, dental and disability benefits programs Group retirement savings program Health and wellness programs An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! The Shelly Company, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.
    $30 hourly 47d ago
  • Job icon imageJob icon image 2

    Looking for a job?

    Let Zippia find it for you.

  • Mechanical Preconstruction Manager

    Clayco 4.4company rating

    Chicago, IL jobs

    About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For The Mechanical Preconstruction Manager will participate in all aspects of the preconstruction process for mechanical systems to develop accurate, detailed cost estimates, often based on conceptual or schematic designs with a focus on heavy/ advanced manufacturing, industrial and mission critical projects. This role is expected to interact with engineers, architects, consultants, owner's representatives, subcontractors, suppliers, a multi-discipline estimating team, senior management, project supervision, and field personnel. The Specifics of the Role Responsible for the collection and distribution of bid documentation relative to RFPs, and solicitation for bid requests using online platform (Autodesk Building Connected). Assist in gathering information to complete Bid Qualification and Criteria requirements. Attend pre-bid meetings to become familiar with unique project requirements and analyze existing site conditions to determine required scope that is not already indicated. Review and interpret project documents to determine job-specific material, equipment, and labor requirements for scope development. Prepare written scopes of work for subcontracts and suppliers and coordinate mechanical scopes with the work of other trades (e.g., civil, structural, architectural, electrical, etc.). Participate in pre-proposal design coordination meetings to support the development of pricing documents for conceptual estimates. Perform constructability analysis of project documents. Communicate design and constructability issues to the project team, while identifying risk elements and appropriate mitigation measures. Provide viable design alternatives and value engineering propositions with analysis supporting benefits to initial and life cycle cost, schedule, maintenance, etc. Perform quantity survey of mechanical systems and components using digitized software, and apply industry standard labor rates (e.g., MCAA, PHCC, etc.) to develop accurate cost estimates. Evaluate vendor and subcontractor for conformance with proposal requirements; level scopes and identify low cost/ best value responses while capturing assumptions, rationale, inclusions, exclusions, etc. Prepare estimates used for bidding and budgeting purposes (including self-performed work); participate in internal estimate review process and assist with final recap of estimate for presentation to senior management. Support project management tasks, including budgeting, schedule development, interim design review, change order pricing, procurement, value engineering, and vendor selection based on proposal development. Coordinate with project teams to evaluate productivity for historical data and schedule/ cost forecasting purposes. Maintain and improve supplier and subcontractor database utilizing the company's prequalification program. Supervise junior estimators, estimating assistants and/or Interns, providing training and support in a mentoring capacity and review work products for quality control. Assist in the organization and maintenance of estimating software material cost databases to ensure accurate costs are consistently utilized on bids; communicate data on construction and material cost trends affecting project costs to project teams. Identify opportunities for improvement in departmental processes, approach, and execution of estimating and preconstruction functions; assist in creating or adopting new tools to maximize productivity with the lowest attendant value of acceptable risk. Requirements Bachelor's Degree in Mechanical Engineering, or other Engineering discipline, Construction Management, or related field, or a combination of education (including trade schools) and professional experience. 5-10 years of experience in preconstruction/estimating with a focus on mechanical systems (i.e., Fire Protection, HVAC, Plumbing, Piping). Exhibits inclusive leadership and teamwork behavior, and values diverse perspectives from team members. Demonstrated experience in the successful management of bidding process for conceptual estimates with a preferred emphasis on heavy/ advanced manufacturing, industrial and mission critical markets. Working knowledge of codes and standards applicable to the design and installation of mechanical systems. Working knowledge of construction contract language and terms in addition to various contractual delivery methods (e.g., negotiated, hard bid, design assist, GMP, etc.) Possesses strong technical writing, math and computer skills with proficiency using standard office software applications such as Bluebeam, Microsoft Excel, Word, and PowerPoint to support estimating efforts. Proficiency using estimating software with a preference for Trimble products. Some Things You Should Know Our clients and projects are nationwide - Travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! Why Clayco? 2025 Best Places to Work - St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2025 ENR Midwest - Midwest Contractor (#1). 2025 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2025 ENR Top 100 Green Contractors - Green Contractor (Top 3). 2025 ENR Top 25 Data Center Builders - Data Center Contractor (Top 3). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. It is not typical for an individual to be hired at or near the top of the range for the role and compensation decisions are dependent on the facts and circumstances of each case. The Clayco Nationwide salary range for this position is approximately $90,000 - $130,000 +/- annually (not adjusted for location).
    $90k-130k yearly 1d ago
  • Field Mechanic

    Brightview Landscapes, LLC 3.7company rating

    Sacramento, CA jobs

    The Best Teams are Created and Maintained Here. * The Mechanic is responsible for maintaining and repairing machinery. Duties and Responsibilities: Perform maintenance and repairs on a variety of large and small engines Provide information and reports on equipment Ensure that all equipment operates efficiently and safely at all times Education and Experience: Minimum 2 years of experience with basic truck and vehicle maintenance and repair Small engine, 2-cycle Diesel Engine, heavy and light equipment Bilingual (Spanish/English) a plus Welding experience Physical Demands/Requirements: * Regular Heavy lifting up to 50 pounds * Repetitive movement: standing, walking, twisting, turning, bending, squatting, stooping Work Environment: * Noise level in work environment is usually moderate, and Occasional exposure to outside weather conditions, including sun, rain, cold BrightView Landscapes, LLC is an Equal Opportunity and E-Verify Employer. This job description is subject to change at any time. Compensation Pay Range: 30.00 - 40.00 BrightView offers a suite or health, wellness, and financial benefits to full-time team members. Benefits offerings for full-time team members include medical, dental, and vision insurance, ancillary and voluntary products, a 401k savings plan with employer contributions, and 6 to 9 company paid holidays per year. Employees may also be eligible to receive paid time off for vacation and/or sick leave, tuition reimbursement, and/or potential variable pay opportunities based on position and performance. A detailed benefits package will be provided during the interview process. It's Not Just a Team. It's One BrightView.
    $52k-73k yearly est. 3d ago
  • Heavy Equipment Mechanic

    Wagman 3.5company rating

    Virginia jobs

    Heavy Equipment Mechanic Pay rate: $25.00/hr -$35.00/hr (Based on experience and certifications) Travel: Regional- Must be able to travel to VA job sites when needed We are currently looking for a Field Heavy Equipment Shop Mechanic to join our Heavy Civil team at our Dinwiddie, VA Field Service Center. The Mechanic position is subject to travel throughout VA to our various job sites to support our operations teams. Wagman is a multi-faceted construction firm with major operations in heavy civil, general construction and geotechnical construction services. Wagman is a fourth generation, family-owned company with offices in Pennsylvania and Virginia and is headquartered in York, PA. Founded in 1902 Wagman is a nationally recognized leader in the industry. Core competencies include: design-build, infrastructure, marine construction, modified concrete, grooving and grinding, and geotechnical construction services. This is a safety sensitive position requiring work on construction sites with various safety hazards inherent in heavy construction. This position is subject to drug testing and compliance policies associated with our status as a Federal Contractor. Basic Requirements: Valid Driver's license Min. CDL B required Minimum 3+ years preferred experience as a heavy equipment mechanic in construction industry Test repaired equipment to insure operating efficiency. Essential Functions: Inspecting and lubricating heavy construction equipment in shop and at construction job sites. Repair trouble shooting of heavy trucks and construction equipment (i.e., loaders, dozers, cranes, backhoes, etc.), including removal of defective parts and installing new or rebuilt parts. Test repaired equipment to insure operating efficiency. Trouble shoot, diagnose and repair electrical systems. Repair hydraulic systems Assist in dismantling and/or putting together cranes. Make preventative maintenance checks and inspections Physical Requirements: Must be able to lift up to 30 pounds from ground level to waist level. Continuous standing and walking required throughout a scheduled work shift. Required to perform simple grasping and fine manipulation tasks with both hands, and requires acceptable corrected vision (in both eyes) and acceptable corrected hearing. Must be able to climb ladders and/or steps on equipment to access areas to be repaired. Must be able to bend, squat, kneel and crawl. Must be able to work in dirty, greasy, noisy, cold, hot and humid working conditions. Job Benefits: Wagman wants to keep employees and their families happy and healthy and offers a comprehensive benefits package to all full-time employees that includes: Medical/Vision/Dental Insurance Flexible Spending Accounts for Healthcare and Dependent Care Disability and Life Insurance Wellness Programs that include Orthopedic Care 401(k) Retirement Plan with Company Matching Contribution Tuition Reimbursement Adoption Assistance Employee Assistance Program 8 paid holidays Paid Time Off Our Values Wagman's Core Values of integrity, mutual respect, safety, innovation, sense of urgency, and community are an integral part of every decision and every plan made at Wagman and these values have laid the foundation for our success and longevity for our past, present, and future. Consistently being recognized with national and regional awards for projects, safety and community is a testament of our commitment to these values. Beyond the buildings and bridges which connect and improve our communities, Wagman has community engagement programs and initiatives which help to build better, for our people. Wagman Culture Wagman is committed to cultivating a workforce and preserving a culture built on our core values. Our people are our most valuable assets. We value the diverse identities, experiences, perspectives, backgrounds capabilities and talents that our people bring to Wagman. From hiring to training, development, and promotions to special events, Wagman is committed to providing equal and equitable opportunities and rewarding experiences. As a family business providing a safe and healthy work environment in accordance with our mission, we foster diverse and inclusive work experiences and a sense of belonging. Wagman is an affirmative action and equal opportunity employer. We recognize and value our diverse workforce. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Wagman is proud to be an EEO/AA employer M/F/D/V.
    $25-35 hourly 4d ago
  • Field Mechanic

    Ajax Paving 4.5company rating

    Tampa, FL jobs

    Application Instructions Apply online at: **************************** Click the green "Apply Now" button above to begin the online application process. Please complete the entire online application, sign and date the relevant sections, and then submit. You will receive a confirmation email after your online application has been submitted. Position Description The Field Mechanic position is the backbone of the Ajax Equipment Division. The technician is responsible for maintaining the fleet, performing repairs, performing preventative maintenance activities, and inspecting equipment. REPORTING RELATIONSHIPS The Field Mechanic directly reports to and is accountable to the Equipment Maintenance Manager. REQUIREMENTS: A. EDUCATION Minimum of two years' experience in field repairs of Roadway machinery. B. JOB RESPONSIBILITIES Note: The following duties are descriptive and not exhaustive. The omission of specific statements of duties does not exclude them from the position if the work is similar, related or a logical assignment to the position. Major duties include the following: 1. Maintain a clean, safe, work truck 2. Make necessary repairs/services to equipment 3. Follow a weekly repair schedule as directed 4. Accurately record time and materials on work orders 5. Adhere to the Ajax culture of teamwork, dedication, and safety 6. Start and end on time 7. Must have own tools 8. Uphold a high level of customer service D. SAFETY AND ENVIRONMENTAL 1. Abide by all rules listed in the Ajax employee handbook. 2. Insure all Ajax quality standards are met. 3. Insure adherence to all federal, state, local and Ajax Safety and Environmental Rules and Regulations. E. TYPICAL WORKING CONDITIONS 1. Shop/Field Conditions - Work is exposed to outdoor conditions at times, noise and heat. 2. Ability to workdays, occasional weekends & on call nights as required. F. TYPICAL PHYSICAL DEMANDS: The essential function of this position includes sitting, walking, standing, climbing, reaching, bending, trunk movements, lifting minimum of 45 lbs., carrying, pushing/pulling, low level work, dexterity of hands and fingers, seeing, hearing and talking. G. CHARACTER REQUIREMENTS This position demands an individual with the following personality traits: 1. Accurate and well organized 2. Self-motivated 3. Ability to work well with subordinates, peers and supervisors 4. Good communication skills 5. Ambitious H. ATTENDANCE AND RELIABILITY 1. Reporting to work on time, after lunch, and not leaving early unless authorized. 2. Always providing proper notification and advance notice of absence. 3. Not abusing or taking advantage of personal days off. 4. Performing such other duties as may be required. BENEFITS Ajax offers competitive pay and has excellent benefits; comprehensive medical, dental and vision plans, 401(k) with discretionary employer match, life insurance, voluntary supplemental life insurance, flexible spending accounts, health and wellness program, direct deposit, referral bonuses, paid vacation and holidays. Position Requirements Minimum of two years' experience in field repairs of Roadway machinery. Equal Opportunity Employer Equal Opportunity Employer/Minorities/Women/Protected Veterans/Individuals with Disabilities/Sexual Orientation/Gender Identity
    $44k-57k yearly est. 3d ago
  • Mechanic Transport

    Cemex USA 4.7company rating

    Norcross, GA jobs

    Founded in 1906, over the last 110+ years' CEMEX has grown into a global building materials company that provides high quality products and reliable service to customers and communities throughout the Americas, Europe, Africa, the Middle East, and Asia. Here at CEMEX we offer our employees competitive wages, career growth, excellent benefits including health, dental & vision plans, vacation or paid time off, employee assistance program and retirement plan options, along with over a century of stability to build your next career on! To learn more about our company culture and why you should join us, visit us at ************************* For direct access to CEMEX Career Opportunities, visit us at ************************ Job Summary Perform maintenance and repair of various types of flatbed trailers in Company shops, on public roadways, jobsites, and customer's yards as necessary. Maximize equipment availability using efficient and proactive preventative maintenance programs. Job Responsibilities Diagnose air brake air ride and lighting issues and perform mechanical repairs and maintenance to various types of trailers including but not limited to aluminum and steel trailers, dock height and drop deck. Perform routine preventative maintenance services and DOT's and fill out accompanying paperwork Perform routine brake inspections/ adjustments on commercial vehicles following Federal DOT requirements. Create work orders on repairs and services providing legible and accurate information for work performed Input daily repair reports into software-based tracking program. SAP Communicate with drivers and plant managers to ensure adherence to preventative vehicle maintenance policies and practices Use a wide variety of hand and power tools, cutting torches and welding equipment Drive Company service truck to perform road calls, mobile maintenance Operate fixed and mobile equipment as necessary May assist in the maintenance and repair of fixed equipment Comply with all Safety, Health, Environmental and other Company policies, procedures, and requirements Performs other duties as assigned Qualifications High school diploma or equivalent 3 years related experience, training or equivalent combination of education and experience Mechanical Experience Must have own tools up to 1 1⁄4" High School diploma, preferred CDL Class A a plus but not required ASE certifications a plus Knowledge, Skills, and Abilities * Able to understand, interpret, communicate, and execute with exactness instructions given in both verbal and written form * Bi-lingual Spanish a plus Working Conditions Continuous exposure to extreme heat, extreme cold, extreme noise, and working outdoors. Must wear protective equipment while at the location No smoking or tobacco use of any kind on premises No cell phone use while working Physical Requirements Walking, sitting, lifting, pushing, pulling, and climbing to a significant degree Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees/visitors Requires walking, sitting, lifting, pushing, pulling, and climbing to a significant degree Exerting 50 - 100 pounds of force occasionally Exerting 25 - 50 pounds of force frequently Exerting 10 - 20 pounds of force continually While performing the duties of this job, the employee is regularly required to talk and hear, to communicate to employees/visitors as well as function safely around heavy rolling equipment Must be able to perform all job functions which include, but may not be limited to, pushing, turning, and/or pulling of controls Must pass physical to include back x-ray, hearing test and drug/alcohol screen Continuous exposure to extreme heat, extreme cold, extreme noise, and working outdoors Must wear protective equipment while on the job Legal Notices CEMEX is an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. CEMEX will consider for employment qualified applicants with criminal histories in a manner consistent with all local, state and federal laws. CEMEX is an E-Verify participating employer. Arizona Smoke-Free Act. CEMEX complies with the State of Arizona's Smoke-Free Act (Arizona Revised Statutes § 36-601.01). Smoking and/or the use of tobacco or related products is prohibited in and on CEMEX property as well as any building and/or vehicle owned or leased by CEMEX. CEMEX offers both competitive pay and benefits. Benefits applicable to this position may include, but are not limited to, medical, dental, vision, 401(k), Paid Time Off, and Holiday Pay, as well as a comprehensive wellness program to help keep employees and their families healthy and well. You can learn more about CEMEX Benefits by visiting the CEMEX USA Benefits and Well-Being page. (******************************************************************** EEO Statement - En Español CEMEX es una institución EEO/AA (igualdad de oportunidad/acción afirmativa) y no discrimina en base al sexo, edad, raza, color, religión, discapacidad física o mental, credo, origen nacional, estatus veterano, orientación sexual, información genética, identidad de género, o expresión de género en los programas o actividades los cuales opera. Nearest Major Market: Atlanta
    $33k-44k yearly est. 3d ago
  • Mechanic Transport

    Cemex USA 4.7company rating

    Gibsonton, FL jobs

    Founded in 1906, over the last 110+ years' CEMEX has grown into a global building materials company that provides high quality products and reliable service to customers and communities throughout the Americas, Europe, Africa, the Middle East, and Asia. Here at CEMEX we offer our employees competitive wages, career growth, excellent benefits including health, dental & vision plans, vacation or paid time off, employee assistance program and retirement plan options, along with over a century of stability to build your next career on! To learn more about our company culture and why you should join us, visit us at ************************* For direct access to CEMEX Career Opportunities, visit us at ************************ Job Summary Perform maintenance and repair of various types of flatbed trailers in Company shops, on public roadways, jobsites, and customer's yards as necessary. Maximize equipment availability using efficient and proactive preventative maintenance programs. Job Responsibilities Diagnose air brake air ride and lighting issues and perform mechanical repairs and maintenance to various types of trailers including but not limited to aluminum and steel trailers, dock height and drop deck. Perform routine preventative maintenance services and DOT's and fill out accompanying paperwork Perform routine brake inspections/ adjustments on commercial vehicles following Federal DOT requirements. Create work orders on repairs and services providing legible and accurate information for work performed Input daily repair reports into software-based tracking program. SAP Communicate with drivers and plant managers to ensure adherence to preventative vehicle maintenance policies and practices Use a wide variety of hand and power tools, cutting torches and welding equipment Drive Company service truck to perform road calls, mobile maintenance Operate fixed and mobile equipment as necessary May assist in the maintenance and repair of fixed equipment Comply with all Safety, Health, Environmental and other Company policies, procedures, and requirements Performs other duties as assigned Qualifications High school diploma or equivalent 3 years related experience, training or equivalent combination of education and experience Mechanical Experience Must have own tools up to 1 1⁄4" High School diploma, preferred CDL Class A a plus but not required ASE certifications a plus Knowledge, Skills, and Abilities * Able to understand, interpret, communicate, and execute with exactness instructions given in both verbal and written form * Bi-lingual Spanish a plus Working Conditions Continuous exposure to extreme heat, extreme cold, extreme noise, and working outdoors. Must wear protective equipment while at the location No smoking or tobacco use of any kind on premises No cell phone use while working Physical Requirements Walking, sitting, lifting, pushing, pulling, and climbing to a significant degree Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects While performing the duties of this job, the employee is regularly required to talk and hear, in order to communicate to employees/visitors Requires walking, sitting, lifting, pushing, pulling, and climbing to a significant degree Exerting 50 - 100 pounds of force occasionally Exerting 25 - 50 pounds of force frequently Exerting 10 - 20 pounds of force continually While performing the duties of this job, the employee is regularly required to talk and hear, to communicate to employees/visitors as well as function safely around heavy rolling equipment Must be able to perform all job functions which include, but may not be limited to, pushing, turning, and/or pulling of controls Must pass physical to include back x-ray, hearing test and drug/alcohol screen Continuous exposure to extreme heat, extreme cold, extreme noise, and working outdoors Must wear protective equipment while on the job Legal Notices CEMEX is an EEO/AA (equal opportunity/affirmative action) institution and does not discriminate on the basis of race, color, religion, religious creed, sex, sexual orientation, gender identity or expression, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, marital or familial status, military or veteran status, or any other characteristic protected by under federal, state or local law in the programs or activities which it operates. CEMEX will consider for employment qualified applicants with criminal histories in a manner consistent with all local, state and federal laws. CEMEX is an E-Verify participating employer. Arizona Smoke-Free Act. CEMEX complies with the State of Arizona's Smoke-Free Act (Arizona Revised Statutes § 36-601.01). Smoking and/or the use of tobacco or related products is prohibited in and on CEMEX property as well as any building and/or vehicle owned or leased by CEMEX. CEMEX offers both competitive pay and benefits. Benefits applicable to this position may include, but are not limited to, medical, dental, vision, 401(k), Paid Time Off, and Holiday Pay, as well as a comprehensive wellness program to help keep employees and their families healthy and well. You can learn more about CEMEX Benefits by visiting the CEMEX USA Benefits and Well-Being page. (******************************************************************** EEO Statement - En Español CEMEX es una institución EEO/AA (igualdad de oportunidad/acción afirmativa) y no discrimina en base al sexo, edad, raza, color, religión, discapacidad física o mental, credo, origen nacional, estatus veterano, orientación sexual, información genética, identidad de género, o expresión de género en los programas o actividades los cuales opera. Nearest Major Market: Tampa
    $32k-43k yearly est. 4d ago
  • Plumber Mechanic

    Atlantic Constructors, Inc. 3.9company rating

    Virginia Beach, VA jobs

    . The Plumber Mechanic provides guidance and direction to apprentices\/helpers. Ensures job quality and customer satisfaction is maintained in every stage of the project. . Essential Functions: . Assembles, installs, layouts, and repairs pip Mechanic, Plumber, Plumber, Construction
    $41k-56k yearly est. 8d ago
  • Plumber Mechanic

    Atlantic Constructors, Inc. 3.9company rating

    Richmond, VA jobs

    . The Plumber Mechanic provides guidance and direction to apprentices\/helpers. Ensures job quality and customer satisfaction is maintained in every stage of the project. . Essential Functions: . Assembles, installs, layouts, and repairs pip Mechanic, Plumber, Plumber, Construction
    $41k-56k yearly est. 4d ago
  • Plumber Mechanic

    Atlantic Constructors, Inc. 3.9company rating

    Richmond, VA jobs

    At ACI we build our company and our culture not by counting people, but by making our people count! $0.00 COST FOR MEDICAL, DENTAL, SHORT TERM DISABILITY & LIFE INSURANCE (EMPLOYEE ONLY) COVERAGE! Atlantic Constructors is seeking dynamic, motivated, career minded individuals to join our expanding team! Atlantic Constructors has been recognized as an industry leader in the Mid-Atlantic Region for over 50 years. Benefits: Medical Insurance Plan ($0.00 Employee-Only) Dental Insurance Plan ($0.00 Employee-Only) Short-Term Disability Plan ($0.00 Employee-Only) Life Insurance Plan ($0.00 Employee-Only) Vision Insurance Plan 401(K) Retirement Plan with Generous Company Matching Health Savings Plan with Generous Company Matching Wellness Programs Atlantic Constructors offers competitive benefits, for more information check out our comprehensive list on our website Acibuilds.com Summary/Objective: The Plumber Mechanic provides guidance and direction to apprentices/helpers. Ensures job quality and customer satisfaction is maintained in every stage of the project. Essential Functions: Assembles, installs, layouts, and repairs pipes, fittings, equipment, and fixtures Tests pipes and fixtures using water and air to detect deficiencies Measures, cuts, threads, glues, solders, brazes, and slopes pipes composed of various materials Installs hangers and supports for all plumbing systems Performs other duties as assigned Supervisory Responsibility: No Required: 5 years of experience in commercial field plumbing operations field; or equivalent combination of vocational training and experience Ability to read and interpret blueprints Extensive knowledge of all plumbing systems installation Ability to fabricate offsets, install equipment, and perform basic take offs Obtain required personal hand tools Must be able to multi-task, work with minimal supervision, follow written and oral instructions, show attention to detail, and demonstrate problem-solving skills Must adhere to all company policy and procedures Must be available, and have the means to report to multiple job sites as assigned The work environment and physical demands required would be representative of those that must be met by an employee to successfully perform the essential functions of this job, and may include, but are not limited to the following: Work Environment: May work in varying temperatures; both inside and outside, including inclement weather, heat, humidity, cold, and dampness May work in areas with exposure to moderate/high noise levels May be exposed to fumes or airborne particles including dust May be required to work in confined spaces or from high heights Physical Demands: This role routinely uses construction equipment such as heavy machinery, hand and power tools While performing duties of the job the employee may work aloft, climb, bend, pull, reach overhead, stand/walk for long periods of time and lift up to 50 lbs. Frequently is required to use hands to finger, handle or feel objects, tools or controls; and reach with hands and arms Must be able to correctly identify all colors of a color-coded cable/wires and see close vision, distance vision, depth perception, peripheral vision and ability to adjust focus Travel: * May require travel Preferred: Virginia State Plumbing Journeyman card Medical Gas Certification Prior military experience HS diploma or GED equivalent Visit us at ***************** for more information! * Plumber Mechanic
    $41k-56k yearly est. 2d ago
  • Shop Technician (North Texas) - Austin Commercial

    Austin Bridge 4.2company rating

    Dallas, TX jobs

    Do you want to make a difference? Do you want to grow your career at one of the industry's leading construction firms? Put your expertise and project engineering skills to work at Austin Commercial. Austin Commercial is currently seeking a Shop Technician in Irving, TX. We set the standard for commercial construction and we're looking for talented construction professionals to join us. Austin is 100% employee-owned, so every one of our employee-owners has a vested interest in our success. As a result, we consistently meet and exceed our customers' expectations with our commitment to safety, service, and integrity. Join us today. We Own It! This role is critical to maintaining the performance and safety of our heavy equipment fleet. The ideal candidate will have strong expertise in motor graders and excavators, and be capable of performing off-rental inspections, major repairs, and welding/fabrication tasks. Requirements: Perform comprehensive inspections on off-rental equipment to assess condition and readiness for redeployment Diagnose and execute major repairs on motor grades, excavators, and other heavy machinery. Carry out welding and fabrication tasks to restore or modify equipment components Maintain detailed service records and documentation for all work performed. Ensure all work complies with safety standards and company policies. Qualifications: 2+ years of experience as a shop technician, preferably in construction environments. Strong mechanical knowledge of motor graders and excavators. Proficient in welding and fabrication techniques. Ability to read and interpret equipment manuals, schematics, and technical documents. Excellent communication and teamwork skills. We offer excellent benefits including medical, dental, life, and disability insurance, and a matching 401K plan. We are proud to be a 100% Employee-Owned Company! To learn more about Austin's Employee Ownership history, please go to ****************************************** Austin Commercial is an Equal Opportunity Employer. See the "Know Your Rights" poster available in English and Spanish. No Agency Inquiries Please Austin Industries and all operating divisions (Austin Bridge & Road, Austin Commercial, and Austin Industrial) do not accept unsolicited resumes, candidates' names, or summaries from staffing agencies, search firms, or third-party recruiters. Any unsolicited resumes submitted to Austin Industries, or any of its employee-owners, becomes the property of Austin Industries and Austin Industries will not pay a placement fee. About Austin Commercial Become an owner of one of North America's most respected and fastest-growing commercial construction firms! Austin Commercial's employee-owners put our expertise to work in regional and national operations, building iconic projects that set the bar in our industry. Whether world-class airports and aviation facilities, technologically advanced healthcare facilities, cutting-edge educational and research facilities, professional sports stadiums, high-rises, hospitality, and other leading commercial markets, Austin's industry expertise and ingenuity are second to none. Become an employee-owner today, grow your career, and put your skills to work at Austin Commercial. We Own It! Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
    $41k-57k yearly est. 3d ago
  • Service Technician/Mechanic

    Berry Companies 4.6company rating

    Tulsa, OK jobs

    White Star Machinery - Tulsa, OK is looking to add a Mechanic for our busy shop! If you have experience working on equipment or are looking for a change from the Automotive industry, we want to talk to you! Monday - Friday dayshift, Hourly Rate, plus quarterly bonus. This role will be responsible for providing quality repair services on Bobcat equipment in order to meet customer needs. This includes performing basic diagnostics, service repairs, and maintenance work on customer and/or dealer-owned construction equipment. We offer in house training. Responsibilities Provide quality repair services on construction equipment in order to meet customer needs in a responsive, friendly, educated, and timely manner Performs basic diagnostics, service repairs and maintenance work on customer and/or dealer-owned construction equipment Identifies problems with mechanical, hydraulic, diesel & electrical systems and executes solutions Participates in Service Training programs for the development of skills and knowledge Document all repairs and testing for customer and warranty repairs Any other duties as outlined by the Service Supervisor and or management of the company. Qualifications High school diploma or equivalent is required. 2 year technical school graduate preferred. 1-year fleet or dealership experience in a diesel shop is required; 3-5 years preferred. Must be a team player with a strong sense of commitment to the customer and service team. Must have an inventory of hand tools to facilitate the assigned repairs. Heavy equipment and or agricultural experience is a plus. Physical Requirements Dexterity of hands and fingers to operate construction equipment. Occasionally lifting, carrying, pushing, or pulling 50-100 pounds and/or frequently lifting, carrying, pushing, or pulling 20-50 pounds and/or continuous lifting, carrying, pushing or pulling 10-20 pounds Regularly required to stand, walk, reach with hands and arms, grasp or pull and lift objects. Occasionally required to sit, climb, and balance, kneel, stoop, crouch, and crawl Consistently exposed to outside weather conditions, fumes, and loud noise. Benefits Health, Vision, and Dental Insurance Boot and Safety Glasses Reimbursement Christmas Savings Program Paid Vacation and Flex Time Matching 401K Plan Profit Sharing and Bonus Program Short and Long-term Disability Company Paid Life Insurance Critical Care and Accident Insurance Employee Assistance Program Paid Training Many opportunities for advancement (We prefer to promote from within) Family friendly company White Star Machinery is an authorized dealer of new and used Bobcat compact construction equipment including skid steers, track loaders, compact excavators, telehandlers, utility vehicles and more. We provide service both in the field and in our facility. We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.
    $34k-46k yearly est. 3d ago
  • Swing Shift Journeyman Mechanic - Point of the Mountain East

    Clyde Companies Inc. 4.7company rating

    Draper, UT jobs

    Job Title: Swing Shift Journeyman Mechanic Division: Equipment Supervisor: Shop Supervisor Job Summary: Under limited supervision from the shop foreman, the journeyman mechanic is responsible for performing work of considerable difficulty in the repair and maintenance of vehicles and equipment, and overseeing special projects. Duties and Responsibilities: * Visualize, fulfill, and implement the company vision and core values. * Direct the work of several projects. * Welding and fabrication. * Diagnose, rebuild, and repair vehicles and equipment; perform major engine and transmission repairs and replacements as well as electrical diagnosis. * Perform plant inspections, diagnose any problems, and perform plant maintenance, including electrical. * Complete major road calls and perform field repairs. * Perform inspections and preventive maintenance of vehicles and equipment. * Prepare and maintain records and reports. * Maintain tools as required to do the job. * Operate forklift. * Maintain insurable driving record. * Ensure a safe and healthful work environment at all time. Education and/or Experience: * High school diploma or general education degree (GED). * Three years journeyman experience and/or two year diesel mechanic certificate preferred. * Maintain a commercial driver's license (CDL) and department of transportation (DOT) medical card, preferred but not required. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. * Sitting: 20% of the time * Standing: 85% of the time * Driving: 15% of the time * Weight lifted: Up to 50 pounds * Physical Movement: Will frequently kneel, stoop, crouch, crawl, bend or twist body, use hands to handle, control, or feel objects, tools, or controls, stretch, bend, push pull, lift, or carry heavy objects, support body for long periods of time. * Speaking / Listening: Needs to be able to communicate effectively with supervision, follow instructions, and understand safety requirements. Needs to be able to hear sounds and recognize difference between them as well as focus on one source of sound and ignore others. * Working Conditions: Exposed to hazardous equipment, situations, and conditions. Sometimes will work outdoors at work site and indoors in the repair shop, exposed to all weather conditions. Will also be exposed to sounds and noise levels that are uncomfortable and a variety of lighting conditions, from dim to light. Knowledge, Skills, and Abilities: * Attention and commitment to safety * Ability to work well with others in a team environment * Ability to work long hours * Ability to move 50 pounds * Ability to operate heavy equipment. * Knowledge of diesel engines, transmissions, electronics, and familiar with components associated with them * Skilled in welding, cutting, and fabrication. * Knowledge of plants, set up, and movement * Knowledge of boiler systems and operations * Knowledge of towing, recovery, lifting, and rigging * Knowledge of conveyor systems * Knowledge of fuel and fueling systems * Vast knowledge of complex electrical systems on vehicles/ equipment * Vast knowledge of complex hydraulic systems Training and Development: * New Employee Orientation * Defensive Driving * Customer Service * Mine Safety and Health Administration (MSHA) * Brake repair training and certification. * Fall Protection * Lock Out/ Tag Out * Confined Space * Forklift Certification Apply on-line at genevarock.com/careers/ today! * Current employees are required to speak with their immediate manager before applying for any open positions.* Referral Program: Current employees who refer qualified candidates prior to candidate interviews, will be eligible to receive referral bonuses should their candidate be hired. A $250 bonus will be awarded at the end of each 90-day period up to one year for referred new hires in good standing (for a possible total of $1,000). Geneva Rock Products, Inc. is an "Equal Employment Opportunity/Affirmative Action/PWDNET" Employer Disclaimer: This is not intended to contain a comprehensive listing of duties and responsibilities required of the employee. It reflects management's assignment of key functions; it does not prescribe or limit the tasks that may be assigned. Job descriptions are subject to change at any time. Geneva Rock is a drug free environment.
    $43k-58k yearly est. 6d ago
  • Elevator Mechanic - North Carolina

    Delaware Elevator 3.7company rating

    Charlotte, NC jobs

    Job DescriptionSalary: $32 /hr to $60/hr, based on proven skills & experience Are you an experienced Elevator Mechanic looking to take your career to the next level? Delaware Elevator is expanding and were searching for top talent to join our field operations team across the Eastern Seaboard including Delaware, Maryland, Virginia, North Carolina, and Florida. If you hold an elevator mechanic license (or have the credentials/ experience to obtain one), we want to talk to you about where you can fit within our growing team. Ready for a change? Lets chat! Essential Functions: New Construction & Modernization Mechanics: Install and upgrade various elevator systems, from groundbreaking to final inspections. Service Technicians: Repair, maintain, and test equipment, including moving parts and systems that operate on mechanical and electronic principles. Analyze information and evaluate solutions to solve complex problems. Professionally interact with customers, general contractors, and business owners to ensure quality service. Qualifications: Must hold Elevator Mechanic licensing (or be able to obtain within 6 months of hire). Minimum 5 years of experience in the trade. Successful completion of a 4-year federally approved apprenticeship program is a plus. Ability to perform physical activities, including climbing, lifting, balancing, walking, stooping, and handling materials. Must be able to travel out of town and participate in an on-call rotation (afterhours may be required). Why Join Us? Competitive compensation based on experience and skills. Company vehicle and fuel card. Full benefits package: 100% paid medical, dental, and vision (for employees, 50% for dependents). Retirement 401(k), disability, life insurance, AFLAC, wellness plans, and member discounts. Paid vacation and holidays. Continuing education and career advancement opportunities. At Delaware Elevator, we value your expertise and invest in your future. If you're ready to grow with a trusted company that operates with integrity, apply now and lets build the future together! AA/EEO #LI-JS1
    $32-60 hourly 6d ago
  • Elevator Mechanic - North Carolina

    Delaware Elevator 3.7company rating

    Charlotte, NC jobs

    Are you an experienced Elevator Mechanic looking to take your career to the next level? Delaware Elevator is expanding and we're searching for top talent to join our field operations team across the Eastern Seaboard - including Delaware, Maryland, Virginia, North Carolina, and Florida. If you hold an elevator mechanic license (or have the credentials/ experience to obtain one), we want to talk to you about where you can fit within our growing team. Ready for a change? Let's chat! Essential Functions: New Construction & Modernization Mechanics: Install and upgrade various elevator systems, from groundbreaking to final inspections. Service Technicians: Repair, maintain, and test equipment, including moving parts and systems that operate on mechanical and electronic principles. Analyze information and evaluate solutions to solve complex problems. Professionally interact with customers, general contractors, and business owners to ensure quality service. Qualifications: Must hold Elevator Mechanic licensing (or be able to obtain within 6 months of hire). Minimum 5 years of experience in the trade. Successful completion of a 4-year federally approved apprenticeship program is a plus. Ability to perform physical activities, including climbing, lifting, balancing, walking, stooping, and handling materials. Must be able to travel out of town and participate in an on-call rotation (afterhours may be required). Why Join Us? Competitive compensation based on experience and skills. Company vehicle and fuel card. Full benefits package: 100% paid medical, dental, and vision (for employees, 50% for dependents). Retirement 401(k), disability, life insurance, AFLAC, wellness plans, and member discounts. Paid vacation and holidays. Continuing education and career advancement opportunities. At Delaware Elevator, we value your expertise and invest in your future. If you're ready to grow with a trusted company that operates with integrity, apply now and let's build the future together! AA/EEO #LI-JS1
    $63k-96k yearly est. 60d+ ago
  • Elevator Mechanics / Technicians (All locations)

    Delaware Elevator 3.7company rating

    Salisbury, MD jobs

    Looking to take your elevator career to the next level? Delaware Elevator, with branch offices spanning the Eastern Seaboard - including Delaware, Maryland, Virginia, North Carolina, and Florida - is searching for skilled Elevator Mechanics and Service Technicians. If you hold an elevator mechanic license and are ready for a change, contact us today to find your place on our expert field operations team! Essential Functions New Construction & Modernization Mechanics: Install and upgrade elevator systems from ground break to final inspection. Service Technicians: Maintain and repair equipment, servicing moving parts and machinery that operate on mechanical and electronic principles. Analyze information and troubleshoot to choose the best solutions. Professionally interact with customers, general contractors, and business owners. Qualifications Hold an Elevator Mechanic license (or be able to obtain one within 6 months). Minimum 5 years of experience in the elevator trade. Completion of a 4-year federally approved apprenticeship program is a plus. Physically capable of climbing, lifting, balancing, and handling materials with precision. Able to travel and participate in an on-call rotation (afterhours may be required). Why Join Us? Competitive compensation based on experience and skills. Company vehicle & fuel card provided. Full benefits package: 100% paid medical, dental, and vision (for employees, 50% for dependents). Retirement 401(k), disability, life insurance, AFLAC, wellness programs, and member discounts. Paid vacation, holidays, and continuous education opportunities. At Delaware Elevator, we invest in your future while valuing your expertise. Join a company that operates with integrity and keeps the world moving. Apply today and grow your career with us! AA/ EEO #LI-JS1
    $81k-122k yearly est. 60d+ ago
  • Journeyman Mechanic

    Johns Manville 4.7company rating

    Ohio jobs

    Who We Are Johns Manville is a leading manufacturer and marketer of premium-quality insulation and commercial roofing, along with glass fibers and nonwovens for commercial, industrial and residential applications. Our products are used in a wide variety of industries including building products, aerospace, automotive and transportation, filtration, commercial interiors, waterproofing and wind energy. A proud member of the Berkshire Hathaway family of companies, we serve customers in more than 80 countries around the globe. We are committed to delivering positive and powerful experiences, because we are successful only when our employees and customers thrive. We are passionate, we care about people, we perform at a superior level, and we protect others and our environments. Compensation The base hourly rate for this position is $35.64. Supports and promotes safe practices and environmental commitments in alignment with company commitments, policies, and compliance requirements Perform mechanical preventative maintenance according to an established schedule on all required equipment. Inspect machinery, lubricate and make adjustments or repairs as needed and take faulty equipment out of operation until repaired. Effectively troubleshoot all mechanical equipment to identify issues within the plant and take necessary corrective actions to repair, replace or rebuild. Continuously work in a safe manner and report all safety hazards. Work with Maintenance Apprentice to develop there require skills to complete Apprenticeship program Maintain an open and candid working relationship with immediate supervisor/manager discussing all matters of importance. Perform other job functions as requested to support the effective and efficient operation of the plant, including duties of lower classifications. Reads, interprets and follows blueprints and sketches, making all measurements and calculations necessary to complete the job. Makes out work orders, requisitions, inspection reports, time distribution, material usage, etc., and performs other clerical duties necessary to maintain proper records relative to the work performed. Directs, assists, and instructs other maintenance employees on jobs where it is necessary to work together or when requested by Supervisor. Does gas cutting as directed. Inspects/maintains plant buildings and maybe required to cast concrete forms and bollards as needed. Operates, maintains, inspects, lubricates and repairs all plant systems as required. Housekeeping responsibilities. Uses safe work practices and reports hazardous conditions. Follow safety guidelines in the defiance complex. Wear proper PPE. Follow all general shop rules for defiance complex. Cleanup your work area (unit). Attend all monthly safety meetings. Complete safety/beware audits on a monthly basis. Complete computer based training and all other programs needed to stay in compliance with company policy's Please Keep in Mind If you do not meet 100% of these requirements, we at JM still want to hear from you. So, if you are interested in the role, we encourage you to apply so we can learn how your skills and talents can contribute to our team. Benefits Johns Manville (JM) offers a wide range of benefits to employees. Some are subsidized by the company and others are fully employee-paid. Health benefits include a choice of comprehensive medical plans, a dental plan, vision plan, wellness program and critical illness insurance. JM sponsors a 401(k) plan which includes a sizeable company match. JM offers paid vacation and also provides paid sick and parental leave for eligible employees. Additionally, Johns Manville provides basic life Insurance, short-term and long-term disability coverage, an employee assistance program, and business travel accident coverage. Supplemental life insurance and accidental death and dismemberment insurance are available as well. The company also offers a variety of tax saving accounts; health spending account, traditional flexible spending account, and a dependent care spending account. JM also offers a tuition reimbursement program for undergraduate and certain graduate programs. Diversity & Inclusion Johns Manville believes diversity and inclusion in our workplace is critical for the long-term success of our company. We are committed to retaining, developing and attracting a diverse workforce that fosters an inclusive work environment in which all employees are treated with dignity and respect. This is the right thing to do for our employees, our company and our communities. Our D&I council is composed of employees from locations across North American & Europe who meet regularly and work to promote and foster an environment of inclusion. Born from our D&I council is our network of employee resource groups (ERGs) that are focused on supporting diverse communities in the workplace. Review more about our diversity & inclusion initiatives on JM's Career page. Incumbent must be physically able to perform essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. We are proud to be an Equal Opportunity/Affirmative Action employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing.
    $35.6 hourly Auto-Apply 60d+ ago
  • Journeyman Mechanic - Park City

    Clyde Companies Inc. 4.7company rating

    Park City, UT jobs

    Job Title: Journeyman Mechanic Division: Equipment Supervisor: Shop Foreman Job Summary: Under limited supervision from the shop foreman, the journeyman mechanic is responsible for performing work of considerable difficulty in the repair and maintenance of vehicles and equipment and overseeing special projects. Duties and Responsibilities: * Visualize, fulfill, and implement the company vision and core values. * Perform duties of a mechanic class 2. * Direct the work of several projects. * Welding and fabrication. * Diagnose, rebuild, and repair vehicles and equipment; perform major engine and transmission repairs and replacements as well as electrical diagnosis. * Perform plant inspections, diagnose any problems, and perform plant maintenance, including electrical. * Complete major road calls and perform field repairs. * Perform inspections and preventive maintenance of vehicles and equipment. * Prepare and maintain records and reports. * Maintain tools as required to do the job. * Operate forklift. * Maintain insurable driving record. * Ensure a safe and healthful work environment at all time. Education and/or Experience: * High school diploma or general education degree (GED). * Three years journeyman experience and/or two year diesel mechanic certificate preferred. * Maintain a commercial driver's license (CDL) and department of transportation (DOT) medical card, preferred but not required. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. * Sitting: 20% of the time * Standing: 85% of the time * Driving: 15% of the time * Weight lifted: Up to 50 pounds * Physical Movement: Will frequently kneel, stoop, crouch, crawl, bend or twist body, use hands to handle, control, or feel objects, tools, or controls, stretch, bend, push pull, lift, or carry heavy objects, support body for long periods of time. * Speaking / Listening: Needs to be able to communicate effectively with supervision, follow instructions, and understand safety requirements. Needs to be able to hear sounds and recognize difference between them as well as focus on one source of sound and ignore others. * Working Conditions: Exposed to hazardous equipment, situations, and conditions. Sometimes will work outdoors at work site and indoors in the repair shop, exposed to all weather conditions. Will also be exposed to sounds and noise levels that are uncomfortable and a variety of lighting conditions, from dim to light. Knowledge, Skills, and Abilities: * Attention and commitment to safety * Ability to work well with others in a team environment * Ability to work long hours * Ability to move 50 pounds * Ability to operate heavy equipment. * Knowledge of diesel engines, transmissions, electronics, and familiar with components associated with them * Skilled in welding, cutting, and fabrication. * Knowledge of plants, set up, and movement * Knowledge of boiler systems and operations * Knowledge of towing, recovery, lifting, and rigging * Knowledge of conveyor systems * Knowledge of fuel and fueling systems * Vast knowledge of complex electrical systems on vehicles/ equipment * Vast knowledge of complex hydraulic systems Training and Development: * New Employee Orientation * Defensive Driving * Customer Service * Mine Safety and Health Administration (MSHA) * Brake repair training and certification. * Fall Protection * Lock Out/ Tag Out * Confined Space * Forklift Certification Apply on-line at genevarock.com/careers/ today! * Current employees are required to speak with their immediate manager before applying for any open positions.* Referral Program: Current employees who refer qualified candidates prior to candidate interviews, will be eligible to receive referral bonuses should their candidate be hired. A $250 bonus will be awarded at the end of each 90-day period up to one year for referred new hires in good standing (for a possible total of $1,000). Geneva Rock Products, Inc. is an "Equal Employment Opportunity/Affirmative Action/PWDNET" Employer Disclaimer: This is not intended to contain a comprehensive listing of duties and responsibilities required of the employee. It reflects management's assignment of key functions; it does not prescribe or limit the tasks that may be assigned. Job descriptions are subject to change at any time. Geneva Rock is a drug free environment.
    $43k-58k yearly est. 18d ago
  • Journeyman Mechanic - Park City

    Clyde Companies 4.7company rating

    Park City, UT jobs

    Job Title: Journeyman Mechanic Division: Equipment Supervisor: Shop Foreman Job Summary: Under limited supervision from the shop foreman, the journeyman mechanic is responsible for performing work of considerable difficulty in the repair and maintenance of vehicles and equipment and overseeing special projects. Duties and Responsibilities: Visualize, fulfill, and implement the company vision and core values. Perform duties of a mechanic class 2. Direct the work of several projects. Welding and fabrication. Diagnose, rebuild, and repair vehicles and equipment; perform major engine and transmission repairs and replacements as well as electrical diagnosis. Perform plant inspections, diagnose any problems, and perform plant maintenance, including electrical. Complete major road calls and perform field repairs. Perform inspections and preventive maintenance of vehicles and equipment. Prepare and maintain records and reports. Maintain tools as required to do the job. Operate forklift. Maintain insurable driving record. Ensure a safe and healthful work environment at all time. Education and/or Experience: High school diploma or general education degree (GED). Three years journeyman experience and/or two year diesel mechanic certificate preferred. Maintain a commercial driver's license (CDL) and department of transportation (DOT) medical card, preferred but not required. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Sitting: 20% of the time Standing: 85% of the time Driving: 15% of the time Weight lifted: Up to 50 pounds Physical Movement: Will frequently kneel, stoop, crouch, crawl, bend or twist body, use hands to handle, control, or feel objects, tools, or controls, stretch, bend, push pull, lift, or carry heavy objects, support body for long periods of time. Speaking / Listening: Needs to be able to communicate effectively with supervision, follow instructions, and understand safety requirements. Needs to be able to hear sounds and recognize difference between them as well as focus on one source of sound and ignore others. Working Conditions: Exposed to hazardous equipment, situations, and conditions. Sometimes will work outdoors at work site and indoors in the repair shop, exposed to all weather conditions. Will also be exposed to sounds and noise levels that are uncomfortable and a variety of lighting conditions, from dim to light. Knowledge, Skills, and Abilities: Attention and commitment to safety Ability to work well with others in a team environment Ability to work long hours Ability to move 50 pounds Ability to operate heavy equipment. Knowledge of diesel engines, transmissions, electronics, and familiar with components associated with them Skilled in welding, cutting, and fabrication. Knowledge of plants, set up, and movement Knowledge of boiler systems and operations Knowledge of towing, recovery, lifting, and rigging Knowledge of conveyor systems Knowledge of fuel and fueling systems Vast knowledge of complex electrical systems on vehicles/ equipment Vast knowledge of complex hydraulic systems Training and Development: New Employee Orientation Defensive Driving Customer Service Mine Safety and Health Administration (MSHA) Brake repair training and certification. Fall Protection Lock Out/ Tag Out Confined Space Forklift Certification Apply on-line at genevarock.com/careers/ today! *Current employees are required to speak with their immediate manager before applying for any open positions.* Referral Program: Current employees who refer qualified candidates prior to candidate interviews, will be eligible to receive referral bonuses should their candidate be hired. A $250 bonus will be awarded at the end of each 90-day period up to one year for referred new hires in good standing (for a possible total of $1,000). Geneva Rock Products, Inc. is an “Equal Employment Opportunity/Affirmative Action/PWDNET” Employer Disclaimer: This is not intended to contain a comprehensive listing of duties and responsibilities required of the employee. It reflects management's assignment of key functions; it does not prescribe or limit the tasks that may be assigned. Job descriptions are subject to change at any time. Geneva Rock is a drug free environment.
    $43k-58k yearly est. Auto-Apply 3d ago
  • Journeyman Mechanic - Park City

    Geneva Rock 4.2company rating

    Park City, UT jobs

    Job Title: Journeyman Mechanic Division: Equipment Supervisor: Shop Foreman Job Summary: Under limited supervision from the shop foreman, the journeyman mechanic is responsible for performing work of considerable difficulty in the repair and maintenance of vehicles and equipment and overseeing special projects. Duties and Responsibilities: * Visualize, fulfill, and implement the company vision and core values. * Perform duties of a mechanic class 2. * Direct the work of several projects. * Welding and fabrication. * Diagnose, rebuild, and repair vehicles and equipment; perform major engine and transmission repairs and replacements as well as electrical diagnosis. * Perform plant inspections, diagnose any problems, and perform plant maintenance, including electrical. * Complete major road calls and perform field repairs. * Perform inspections and preventive maintenance of vehicles and equipment. * Prepare and maintain records and reports. * Maintain tools as required to do the job. * Operate forklift. * Maintain insurable driving record. * Ensure a safe and healthful work environment at all time. Education and/or Experience: * High school diploma or general education degree (GED). * Three years journeyman experience and/or two year diesel mechanic certificate preferred. * Maintain a commercial driver's license (CDL) and department of transportation (DOT) medical card, preferred but not required. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. * Sitting: 20% of the time * Standing: 85% of the time * Driving: 15% of the time * Weight lifted: Up to 50 pounds * Physical Movement: Will frequently kneel, stoop, crouch, crawl, bend or twist body, use hands to handle, control, or feel objects, tools, or controls, stretch, bend, push pull, lift, or carry heavy objects, support body for long periods of time. * Speaking / Listening: Needs to be able to communicate effectively with supervision, follow instructions, and understand safety requirements. Needs to be able to hear sounds and recognize difference between them as well as focus on one source of sound and ignore others. * Working Conditions: Exposed to hazardous equipment, situations, and conditions. Sometimes will work outdoors at work site and indoors in the repair shop, exposed to all weather conditions. Will also be exposed to sounds and noise levels that are uncomfortable and a variety of lighting conditions, from dim to light. Knowledge, Skills, and Abilities: * Attention and commitment to safety * Ability to work well with others in a team environment * Ability to work long hours * Ability to move 50 pounds * Ability to operate heavy equipment. * Knowledge of diesel engines, transmissions, electronics, and familiar with components associated with them * Skilled in welding, cutting, and fabrication. * Knowledge of plants, set up, and movement * Knowledge of boiler systems and operations * Knowledge of towing, recovery, lifting, and rigging * Knowledge of conveyor systems * Knowledge of fuel and fueling systems * Vast knowledge of complex electrical systems on vehicles/ equipment * Vast knowledge of complex hydraulic systems Training and Development: * New Employee Orientation * Defensive Driving * Customer Service * Mine Safety and Health Administration (MSHA) * Brake repair training and certification. * Fall Protection * Lock Out/ Tag Out * Confined Space * Forklift Certification Apply on-line at genevarock.com/careers/ today! * Current employees are required to speak with their immediate manager before applying for any open positions.* Referral Program: Current employees who refer qualified candidates prior to candidate interviews, will be eligible to receive referral bonuses should their candidate be hired. A $250 bonus will be awarded at the end of each 90-day period up to one year for referred new hires in good standing (for a possible total of $1,000). Geneva Rock Products, Inc. is an "Equal Employment Opportunity/Affirmative Action/PWDNET" Employer Disclaimer: This is not intended to contain a comprehensive listing of duties and responsibilities required of the employee. It reflects management's assignment of key functions; it does not prescribe or limit the tasks that may be assigned. Job descriptions are subject to change at any time. Geneva Rock is a drug free environment.
    $42k-57k yearly est. Auto-Apply 4d ago

Learn more about Oldcastle Infrastructure jobs

View all jobs