Operations engineer jobs in Greece, NY - 184 jobs

Job Description We are currently hiring a Mechanical Engineer in our Building Engineering Division at our Rochester office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team to develop concepts, strategies, designs, drawings, specifications and reports for Building and Renovation projects. Duties System selection and calculations for design purposes Conduct field work to document existing conditions Work with Jr Engineers to develop drawings with building modeling software Work independently and as part of a team to complete project designs Construction phase services such as submittal review and site visits to monitor project progress Salary Range: $70,000 - $90,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements 4 - 6 years of experience working at an A/E consulting firm is preferred Bachelor's degree in Mechanical Engineering is preferred Well rounded experience in HVAC, plumbing, and fire protection Experience with Revit or AutoCAD is preferred Field experience is preferred New York State Professional Engineer's license is a plus Ability to work well with a team and good analytical skills Benefits Body, mind, and wallet-LaBella's benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. Flexible Work Schedule Health/Dental Insurance 401k Plan with Employer Match Short & Long Term Disability Profit Sharing Paid Time Off Leadership Development Program Fitness Reimbursement Tuition Reimbursement Referral Bonus Program Wellness Program Team Building Events Community Service Events

. **The Role:** GM Rochester is seeking a **Facilities** **Engineer** to serve as single-point-of-contact and owner of Facility needs, including managing services necessary for proper physical operation of Manufacturing Facilities. Typical functions include providing engineering support and troubleshooting for building equipment, property maintenance, utility supply, equipment installation, and environmental activities. Work is performed on-site in a Vehicle Components Manufacturing Plant where creativity, initiative, and independent judgment are exercised. **What You'll Do (Responsibilities):** + Provide technical direction to and oversee resident Business Partners and outside contractors to ensure safe work practices are followed when completing their work. + Oversee design, construction, integration, plant installation, successful launch and continuous improvement of Facilities equipment and tools. + Interface with regulatory agencies and municipalities. + Support maintenance and production on Continuous Improvement projects from the Facilities Engineering discipline + Support launch of new programs from equipment design until release to production + Bid & establish equipment installation contracts + Procure construction management resources + Manage scope changes through installation + Lead and support energy conservation activities + Maintain open communication between Rochester's team and corporate group + Drive strategic and analytical planning to optimize building and facility services + Provide technical direction to outside vendors + Improve Facility equipment uptime + Manage contractors through debug and release to production + Sound knowledge of tools, equipment, materials, methods, and standard practices of trades + Dependable appreciation of the importance of completing tasks on time + Consistently show innovative thinking that is customer-centric + Support plant safety initiatives + Understand GM's Workplace Safety System Elements & Performance Standards and how you support a safe environment through your work. **You Skills & Abilities (Required Qualifications):** + Bachelor's Degree in Engineering or equivalent experience in a manufacturing facilities environment + Able to read and work from blueprints + Strong knowledge of facilities operations, utilities equipment and various other central support equipment + Available to work alternative shift schedules, including weekends & holidays. **What Will Give You a Competitive Edge (Preferred Qualifications):** + Master's Degree in Engineering or Facilities Maintenance/Management or equivalent training/experience + 2+ year of experience in Facilities Engineering within a manufacturing or industrial environment + Willing to manage resident Business Partners and outside contractors, including holding responsible for errors, safety violations, and delays + Previous supervisory experience in a union environment GM does not provide immigration-related sponsorship for this role. Do not apply for this role if you will need GM immigration sponsorship now or in the future. This includes direct company sponsorship, entry of GM as the immigration employer of record on a government form, and any work authorization requiring a written submission or other immigration support from the company (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc). This role is categorized as onsite. This means the selected candidate is expected to report to a specific location on a full-time basis. This job may be eligible for relocation benefits. **About GM** Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. **Why Join Us** We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. **Benefits Overview** From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources (************************************************************* . **Non-Discrimination and Equal Employment Opportunities (U.S.)** General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire (********************************************* . **Accommodations** General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email (Careers.Accommodations@GM.com) us or call us at ************. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. We are leading the change to make our world better, safer and more equitable for all through our actions and how we behave. Learn more about: **Our Company (************************************************** **Our Culture** **How we hire (************************************************ Our diverse team of employees bring their collective passion for engineering, technology and design to deliver on our vision of a world with Zero Crashes, Zero Emissions and Zero Congestion. We are looking for adventure-seekers and imaginative thought leaders to help us transform mobility. Explore our global locations (******************************************** We are determined to lead change for the world through technology, ingenuity and harnessing the creativity of our diverse team. Join us to help lead the change that will make our world better, safer and more equitable for all by becoming a member of GM's Talent Community (beamery.com) (*********************************************** . As a part of our Talent Community, you will receive updates about GM, open roles, career insights and more. Please note that filling out the form below will not add you to our Talent Community automatically; you will need to use the link above. If you are seeking to apply to a specific role, we encourage you to click "Apply Now" on the job posting of interest. The policy of General Motors is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, General Motors is committed to being an Equal Employment Opportunity Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at Careers.Accommodations@GM.com .In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

**Sign On Bonus Offered: $5,000** _*terms & conditions apply_ Position assures that equipment is being maintained in an energy-efficient and safe manner, and downtime is reduced to a minimum by anticipation of necessary repairs and maintaining records of past operating experiences. Performs inspections and repairs to assigned property interior and exterior areas, including walls and flooring, installed fixtures, roofing systems, lighting, etc. The Engineer will perform at the highest of ethical standards, reflecting the core values of C&W as defined in its Business Code of Conduct, Policies and Procedures Manual, and other related company policies. This is a non-supervisory/ hourly / non-exempt role. **Responsibilities** - Ensure ongoing preventive maintenance and repair work orders on facility mechanical, electrical, lighting, and other installed systems, equipment, and other components. - Maintain, operate, and repair all HVAC systems and associated equipment, electrical distribution equipment, plumbing systems, building interior/exterior repair, and related grounds as it pertains to assigned client buildings. - Performs HVAC repairs including compressor replacement, condenser replacement, evaporator coil replacement, condenser coil replacement, etc. - Perform assigned facility inspections and due diligence efforts, reporting on as-found conditions impacting satisfactory client occupancy and operations. - Respond effectively to all emergencies. May require light travel during emergency events. - Maintain stock and inventory control. - Recommend improvements to the preventive maintenance program on an ongoing basis. - Ensure the management team is informed of current building operations by compiling and submitting monthly reports. - Study and become familiar with the various items of equipment for assigned client locations, and the methods required to use them properly to ensure required ongoing daily client activities. To include building automation systems, fire/life safety systems, and any other building-related equipment as needed. - Recognize danger and safety hazards and propose methods to eliminate them or use the correct PPE in performing the task needed. - Comply with all applicable codes, regulations, governmental agencies, and company directives related to building operations and practicing safe work habits. - Must maintain all Federal, State, or Local licenses required for locations assigned. - Complete all required C&W Safety Training as scheduled annually. - Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance during all working hours. - Other assigned operational tasks may be typically expected of the Building Engineer role. **KEY COMPETENCIES** - Communication Proficiency (oral and written) - Organization Skills - Technical Proficiency - Problem Solving/Analysis - Sense of Urgency Related requirements Any combination of education and experience that would provide the required knowledge and abilities is qualifying. A typical way to obtain knowledge and abilities would be: **Education** A High School Diploma or GED Equivalent is required. Graduate of an apprentice program or trade school preferred is preferred. **Years of Relevant Experience** Minimum of four (4) years of technical experience in all aspects of building engineering with a strong background in technical aspects of HVAC equipment and systems, plumbing, electrical, equipment repair and maintenance, and overall system design and application as referenced above. **Licenses or Certifications** - Candidate must possess and maintain a valid state driver's license. - Possess a valid "Universal" level certification for CFC and HFC-based refrigerants (EPA Section 608); to service, repair, or dispose of equipment that could release **Knowledge, Skills & Abilities** - Experience in operation, maintenance, and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, gas lines, water systems, and the like. Specifically competent with Liebert air conditioning equipment. - Knowledgeable in energy management systems, techniques, and operations. - Thorough knowledge of all building systems operations, maintenance, and repair. - Excellent interpersonal skills in dealing with tenants, clients, and vendors. - Basic Computing Skills in Outlook, Excel & Word, including proficiency in the operation of smartphone and/or iPad/tablet, uploading .pdf files, and documents, and logging into conference meetings (e.g., BlueJeans, Teams Meetings, Zoom). **Physical Work Requirements** The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential job functions: Environment: This job operates in a professional office or commercial building environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines. Work could any combination of: - Almost constant exposure to loud noise includes the use of power equipment and unusual elements, such as extreme temperatures, toxic chemicals, biohazardous materials, dirt, dust, fumes, smoke, and/or loud noises. - Ability to perform work wearing Personal Protective Equipment (PPE) if required - May require regular travel outside between properties in varying weather conditions. Physical: Considerable physical activity. Ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders), and safely install rigging/lifting devices. Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine. May involve movement between departments, floors, and properties to facilitate work. Should maintain the ability to speak clearly so others can understand you as week as the ability to read and understand the information presented orally and in writing. Vision: See in the normal visual range with or without correction; vision sufficient to read computer screens and printed documents. Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics. Hearing: Hear in the normal audio range with or without correction. **Scheduling** Most schedules work typical business hours based on location assigned. Based on client need, this role may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require over time with very busy periods June through August. Must be willing and able to support after-hours/weekends building-related activity as required. The role may be assigned and must be able to respond to client callbacks for regular repair and/or emergencies events. Other Duties This job description is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice. Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $36.55 - $43.00 Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at ****************** or email *************************** . Please refer to the job title and job location when you contact us. INCO: "Cushman & Wakefield"

Are you a hands-on Mechanical Engineer looking to work on high-precision components in a fast-paced, collaborative environment? Join a growing manufacturing company where your engineering insight directly shapes how products are built, scaled, and delivered. What You'll Do: ✅ Collaborate across engineering, quality, and production teams to optimize manufacturing processes ✅ Develop work instructions, quality plans, and training docs to support the shop floor ✅ Assist with quoting and cost estimation by evaluating manufacturing feasibility ✅ Drive process improvements that enhance throughput, reduce waste, and boost product quality ✅ Troubleshoot production challenges and provide real-time engineering support ✅ Support new product introductions and the scale-up of production lines What We're Looking For: 🔧 Bachelor's in Mechanical Engineering (or equivalent experience) 🛠️ 3-5+ years in a manufacturing/production environment 📐 Proficiency with CAD software (SolidWorks preferred) and MS Office ✅ Strong understanding of DFM principles, quality systems, and process documentation 🗣️ Excellent communication skills - able to translate technical data for cross-functional teams 💡 Problem-solver with a practical, detail-oriented mindset Why You'll Love It Here: ✨ Impactful role in a company that values engineering input 📈 Opportunities to grow with an expanding team 🤝 Collaborative culture with strong cross-functional engagement

To provide engineering and development support to ensure the most economical and feasible methods are utilized for each project. Responsible for collaborating with manufacturing, quality and engineering departments in developing appropriate quality and manufacturing practices and documentation to meet and exceed customer expectations. Essential Duties and Responsibilities: * Consults with Process Engineer and Chief Manufacturing Engineer regarding part quality requirements. * Assists with work instructions, quality plans and appropriate training documents for manufacturing and quality departments. * May consult with customer's technical personnel regarding current and upcoming projects or concepts. * Assists with preparation of accurate cost analysis of projects and forecasts accurate delivery times for quotation process. * Able to make decisions on new production quotes and expansion of product lines for customers. * Consult with Chief Manufacturing Engineer to improve throughput, profit margins, and efficiency in manufacturing. * Works with manufacturing, quality, and engineering to reduce non-conforming material. * Provide engineering support and input to departments within company. * Assists manufacturing department in development of processes for production. * Authority to cease or allow production on parts that do not meet specs. * Participate in targeting strategic processes and skills, and participate in implementing processes, procedures, and training to accomplish those skills. Additional Responsibilities: * Performs product/process analysis for cost reduction, quality improvement, and improved efficiency, and makes recommendations. * May represent Manufacturing/Management Department on cross-function teams. * When requested, may work on special projects and various related assignments. * Performs other related duties and assignments as required. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: * Bachelors' of Engineering Degree from a four-year college or 5 years related experience and/or training; or equivalent combination of education and experience. * The Manufacturing Engineer is expected to know customer and company requirements by reading, interpreting and understanding the necessary specifications and procedures. * Excellent written and oral communication skills. Must have the ability to translate technical data into a format and language suitable for shop floor personnel. * Strong computer skills used to create elaborate work instructions (CAD, Microsoft Office) * Ability to provide feedback to drive behaviors of employees. * Able to deal with a variety of abstract and concrete variables.

As a community, the University of Rochester is defined by a deep commitment to Meliora - Ever Better. Embedded in that ideal are the values we share: equity, leadership, integrity, openness, respect, and accountability. Together, we will set the highest standards for how we treat each other to ensure our community is welcoming to all and is a place where all can thrive. Job Location (Full Address): 250 East River Rd, Rochester, New York, United States of America, 14623 Opening: Worker Subtype: Regular Time Type: Full time Scheduled Weekly Hours: 40 Department: 250548 LLE-Laboratory for Laser Energ Work Shift: UR - Day (United States of America) Range: UR URG 112 Compensation Range: $70,197.00 - $105,295.00 The referenced pay range represents the minimum and maximum compensation for this job. Individual annual salaries/hourly rates will be set within the job's compensation range, and will be determined by considering factors including, but not limited to, market data, education, experience, qualifications, expertise of the individual, and internal equity considerations. Responsibilities: The Laboratory for Laser Energetics (LLE) of the University of Rochester is a unique national resource for research and education in science and technology focusing on using lasers to initiate fusion and high energy density physics. The LLE Electronics and Controls Engineering group has a broad portfolio of custom embedded electronics and consumer off the shelf (COTS) products deployed across the lab. We are seeking an experienced FPGA design engineer to aid in the development of new solutions and support of the exiting install base of devices across the facility. The successful candidate should have a BSEE/BSEET and 3 years of experience or equivalent training and experience. Requirements: - Strong working knowledge of VHDL coding - Experience with RTL simulation - Familiarity with circuit design, development, and troubleshooting Desired skills or experience includes: - Experience with AMD/Xilinx Vivado or ISE - Familiarity with high-speed transceivers used in PCIe or fiber optics - Embedded programming in Linux - CAD schematic capture The University of Rochester is committed to fostering, cultivating, and preserving an inclusive and welcoming culture to advance the University's Mission to Learn, Discover, Heal, Create - and Make the World Ever Better. In support of our values and those of our society, the University is committed to not discriminating on the basis of age, color, disability, ethnicity, gender identity or expression, genetic information, marital status, military/veteran status, national origin, race, religion, creed, sex, sexual orientation, citizenship status, or any other characteristic protected by federal, state, or local law (Protected Characteristics). This commitment extends to non-discrimination in the administration of our policies, admissions, employment, access, and recruitment of candidates, for all persons consistent with our values and based on applicable law.

Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers' standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical leader for the organization, with the responsibility of expediting the process flow of jobs through the factory from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Requirements Minimum Qualifications: Position is located in Rochester, NY Excellent verbal and written communication skills Have a team player attitude that promotes commitment, reliability and follow through Detail oriented with strong organizational skills Ability to resolve problems using logical, systematic and sequential approaches Good computer skills with a proficiency in Microsoft Word, Excel and MRP Systems Solid understanding and application of Geometric Dimensioning & Tolerancing (GD&T) Ability to read and understand blueprints at an advanced level Experience in the utilization of lean manufacturing practices and ISO Quality Systems Three years or more of manufacturing/sheet metal with welding fabrication knowledge CNC machining / programming background is a plus Ability to design & model in 3D CAD Software, Solidworks Preferred Production Specific Duties: Voices all concerns while working with other production staff, Quality Assurance, Engineering and Vice President of Operations to resolve any and all current or potential problems affecting the production schedule Review all new project release packages to verify that customer's specifications are achievable. Participate in new-product-launch meetings Assist Quality Assurance with establishing inspection documents and procedures Recommend continuous improvement actions for improving work processes Departmental Specific Duties: Responsible for all phases of the CNC Programming Process, review Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usages, etc. Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders Create detailed drawings for flat blank layouts using CAD system Monitor actual time and material standards vs. quoted time and material standards Drive process improvement to generate cost reduction Help write the process sheets (travelers) for the jobs Ensure all programs are updated with any modifications from the previous run Design machining, inspection and assembly fixtures Provide technical direction to operators as needed Design tooling and gauges as needed to ensure customers quality requirements are achievable Control proper revision levels for all programs in the company database Measurement Tools: On time delivery to customers Quality performance recognized in scrap reduction and minimized process variation Decrease in job setup time on all equipment Cost savings for production; including tooling Project management and document control organization skills

Job DescriptionAs a member of our Professional Services team, you will assist in the building, deploying, and maintaining of critical customer applications. In this role, you will provide thought leadership and hands-on technical execution to optimize client environments and ensure robust, scalable applications. Responsible for:-Assisting in the designing and building modern and highly scalable cloud-based applications for customers-Migrating and modernizing customer legacy applications using AWS services-Working with Project Managers and clients to provide recommendations and technology roadmaps to meet their business needs-Actively participating in team meetings and cross-functional interactions-Keeping team members and supervisors informed of progress and issues-Actively contributing to client project status meetings-Contributing to R&D projects to validate/invalidate new services offerings-Remaining current with technology trends and new technologies-Proposing the latest technology usage and integration standards-Developing and managing backend infrastructure, APIs and integrations to support cloud-based solutions, using programming languages like Python, Java, and PHP-Participating in code reviews, document infrastructure-as-code, and assist with UI/UX-Building out frontend interfaces and dashboards for applications and infrastructure using languages like Angular and React-Utilizing best practices for security, compliance, and business continuity in cloud solutions How you will be successful:-Bridging the gap between technical complexity and business objectives through adept problem-solving abilities-Building trusting relationships with team members and collaborating departments-Comfortable with pushing boundaries and technical limits (maintain technical aptitude and knowledge of industry)-Confidently communicating with diverse stakeholders to translate requirements into impactful outcomes-Championing ongoing elevation of personal skills paired with knowledge transfer to teammates-Having the ability to rapidly learn new languages, frameworks, or business domains as needed to meet the diverse needs of multiple clients Requirements of the role:-5+ years' experience as a cloud engineer with hands-on expertise across AWS cloud services-Strong experience with infrastructure-as-code tools like CloudFormation-Experience coding in multiple languages including Node.js, Python, Angular, React, .NET Core, .NET Framework-Experience using AWS platforms including but not limited to Cognito and Amplify-Understanding of modern app architectures in cloud environments-Able to collaborate with cloud engineer and project management teams-AWS Certification(s) a must have (can be obtained upon hire) - minimum requirement at 90 days is AWS Certified Developer Associates-In-depth experience with one or more programming languages like Java, JavaScript, Python, C# used for developing cloud-native applications.-Understanding of cloud computing concepts - IaaS, PaaS, serverless, containers etc.-Working knowledge of Amazon Web Services - key services like EC2, S3, Lambda, API Gateway, ECS, Fargate, RDS etc.-Experience using AWS command line tools and SDKs to manage infrastructure as code-Building, deploying, managing microservices applications on AWS-Working with AWS data storage solutions like DynamoDB, NoSQL, and Aurora RDS-Experience with containers & orchestration platforms like Docker, Kubernetes on AWS Security best practices for applications in the public cloud Additional Valuable Skills: -Experience with CI/CD pipelines and automated testing-Building event-driven architectures on cloud platform-Using infrastructure as code tools like CloudFormation -Frontend JavaScript frameworks like React-Machine learning capabilities like SageMaker-Leveraging serverless architectures where applicable The salary range provided is a general guideline. When extending an offer, Innovative considers factors including, but not limited to, the responsibilities of the specific role, market conditions, geographic location, as well as the candidate's professional experience, key skills, and education/training. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

About Us We offer a broad spectrum of commercial and residential HVAC and facilities services, from rooftop to foundation and everything in between. In addition to HVAC repairs and maintenance, our portfolio of facilities services includes on-site personnel for building management operations and maintenance. Job Summary EMCOR Services Betlem is a wholly owned subsidiary of EMCOR Group, Inc. EMCOR is the world's leading provider of mechanical and electrical construction and facilities services, including planning, consulting, and operations and maintenance. We offer a complete package of facilities services, including engineering, design, installation, repair and maintenance. Applicant must have knowledge of, and ability to perform HVAC and energy engineering calculations and evaluate existing systems and equipment operation. Applicants should have a degree from a recognized mechanical engineering or mechanical engineering technology program with at least 4 years of design experience or equivalent. Essential Duties & Responsibilities Engineering and design services for both hydronic and air-side HVAC systems for design-build projects. Construction document production of HVAC systems for design-build projects including coordinating with other trades and vendors, reviewing vendor submittals, and field verification of existing conditions. Energy analysis of existing buildings consumption, development of energy efficiency improvement measures including savings calculations and scope definition, ASHRAE Level I and II energy audits, life cycle cost analysis, and necessary field survey work to assess existing systems. Interaction and close cooperation with the project salespeople, engineers, project managers, and field supervisors in a timely manner to meet project proposal and construction schedules. Support all company operations with technical support including systems and equipment troubleshooting as directed by supervisor. Engage in the process of design and layout review of selected projects developed by other personnel as directed by the Engineering Manager. Develop proposals in cooperation with salespeople. Local travel to regional jobsites to assist with design and documentation of mechanical systems. Qualifications Graduate of a recognized mechanical engineering program with minimum 4 years' design experience. Energy analysis experience a plus. This candidate should be familiar with the ASHRAE guidelines and local NYS codes. Knowledge of blueprint reading of both architectural and building trades. Knowledge of sheet metal and hydronic piping layout and fabrication. Knowledge of coordination with other building trades. Knowledge and ability to design HVAC systems. Plumbing design experience a plus. Proficient with Word, Excel, and PowerPoint software. Experience with Trane Trace a plus. Working knowledge of AutoCAD and Revit/BIM software and ability to apply industry standard drafting principles Equal Opportunity Employer As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled Affirmative Action Policy Please review our Affirmative Action Policy. Notice to Prospective Employees Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and its companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. Geographic Disclosure Compensation Range-$65,000/year-$90,000/year Benefits: We are committed to providing employees a comprehensive benefits package which includes medical, dental, and vision coverage, along with health savings and flexible spending accounts, life insurance, disability, a 401(k) Savings Plan, College Coach and employee assistance program. #betlem #LI-P1

We are seeking an accomplished Tooling Design Engineer for our growing demands. The Tooling Design Engineer develops 2d and 3d designs used to manufacture injection mold tooling, fixtures, and end of arm tooling. We are willing to consider experienced mold makers who are seeking a new opportunity in tooling design. Essential Duties and Responsibilities Design production and prototype tooling and fixtures to specified design criteria considering: annual part volume, cycle time, quoted mold specifications, and tooling budgets. Create 2D prints of highly critical dimensional areas as well as general tooling layout packets. Present completed designs for review both internally as well as externally with customer present. Assist sales and project engineering groups with design for manufacture issues and part improvements. Perform mold CAE analysis consisting of filling, cooling, and warpage. This indicates the general nature and level of work, duties and responsibilities expected of the incumbent. The incumbent may be asked to perform other duties as required. The job description may be changed if needed as determined by the Company. Qualifications Required Competencies, Skills and Experience Minimum 3 to 5 years proven experience in Plastic Injection Molding 3D Modeling experience, preferably SolidWorks Prior Mold Making, and/or Design experience FEA analytical experience in Mold Flow, or SolidWorks Simulation is a plus Excellent interpersonal and communications skills Must have excellent organizational skills and a high level of follow through Self-motivated Ability to work with individuals at all levels Education and Job Experience Requirements Completion of skilled trades training applicable to plastics industry Two- or four-year degree preferred Work Environment and Physical Demands Regularly required to sit and use hands Occasionally need to lift and/or move up to 10 pounds, with a potential of up to 25 pounds. Sedentary, office environment; frequent exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc) and following good manufacturing practices. The work environment and physical demands detailed above are representative of those encountered while performing the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed.

Job DescriptionShape the Grid: A Day in This Role Your morning starts with fresh LiDAR and aerial survey datasets. You translate terrain and environmental realities-wetlands, vernal pools, and other sensitive areas-into practical routing constraints. By midday, you're in PLSCAD, refining plans, profiles, and cross-sections to align with AVANGRID TM and the NESC. In the afternoon, you weigh conductor options, propose structure types, and perform insulation coordination, A/C interference, and static wire and grounding studies. You close the day aligning stakeholders, confirming right-of-way strategies, and validating cost and probability models for upcoming capital projects. What You'll Tackle Own end-to-end transmission line design from early planning through implementation. Perform conductor selection and structure recommendations, plus insulation studies, A/C interference analysis, and static wire/grounding evaluations. Develop detailed line designs-plans, profiles, cross-section details, and buildable estimates. Integrate LiDAR and aerial survey inputs and account for environmental constraints such as wetlands, vernal pools, and other sensitive areas in routing decisions. Lead the overall transmission line design scope for capital projects. Create and review transmission line plan-and-profile drawings in PLSCAD to meet AVANGRID TM and NESC requirements. Strategize routing with right-of-way needs, congestion, local permitting realities, and system reliability optimization in mind. Run probability modeling, cost estimation, and other required technical analyses to support decisions. Collaborate with multidisciplinary partners to deliver compliant, successful projects. Qualifications Bachelor's degree in Engineering or Engineering Technology (Civil, Electrical, or closely related). 3-5+ years of power system civil engineering experience, preferably focused on transmission lines. Professional Engineer (PE) license preferred. Deep understanding of line design practices, routing strategies, and transmission standards. Proficiency with PLSCAD and related design tools. Demonstrated ability to evaluate environmental and structural constraints and incorporate them into plans.

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military

Hydraulic Engineer Salary: $82K to $98K plus bonus and full benefits Hours: 8am-5pm, Monday-Friday Education: B.S in engineering is required Experience: 5+ years of experience The Hydraulic Design Engineer will lead and manage the development of new pump hydraulic designs for customer orders from customer request for quotation through design and testing. This will include completion of both hydraulic and some mechanical design elements. Position Responsibilities: Leads the development of new hydraulics for customer orders and development projects with up to $2M in budget and annual sales revenues up to $10M. Leads the development and advancement of the company hydraulic design techniques including CFD (Computational Fluid Dynamics) tools. Review results of pump performance tests and discuss results with customers and leads the resolution of challenging problems. Assist in new product development projects. Provide technical support the sales team during critical sales efforts. Represent the business at trade shows and industry organizations. Leads or assists in the resolution of challenging customer field problems Conduct hydraulic component design, analysis, and problem resolution using empirical design tools, CFD simulation and/or testing. Develop tools and methods to improve hydraulic design and analysis techniques, their accuracy and their productivity Create technical reports for internal and external (customer) circulation in support of project, LOD, internal testing or field testing Design and conduct laboratory and field experiments on actual equipment as part of a development project, LOD or problem resolution. Education: B.S. Engineering, M.S. preferred Experience: 5+ years of experience of experience in the design of pumps including hydraulic design for candidates with a B.S. For candidates with an M.S. or higher degree, less experience may be accepted. Skills/knowledge: Experience with pump testing, interpreting results and problem solving. Field experience with solving site hydraulic problems. Experience in designing hydraulic centrifugal pump components. Heavy duty industrial pump hydraulic and mechanical design expertise. Working knowledge of CFD including the ability to apply it in the design and evaluation of turbomachinery hydraulics. Project management skills. Interpersonal and communication skills. Knowledge of foundry, machining and fabrication processes. Knowledge of industry standards including API, ANSI, ISO, HI, etc. Creativity (i.e. ' ability to approach projects in non-traditional fashion). Ability to effectively manage multiple projects and priorities. Ability to identify barriers to success and find solutions working across and up the organization. Effective written and verbal communication. Experience with HI and API 610 requirements is desirable.

About Advanced Atomization TechnologiesAdvanced Atomization Technologies (AA TECH) is a joint venture between Parker Aerospace and GE Aviation, created to produce and support advanced fuel nozzles and related products for current and future commercial engine platforms, including aerospace and aero-derivative engines. The highly skilled and experienced team of AA TECH employees is expert in design, assembly, testing, and aftermarket support, providing our customers with a world-class product and support experience. AA TECH offers a comprehensive and competitive compensation and benefits package, including: Variable Incentive Plan (Bonus Eligibility) Health, Dental, and Vision Insurance with HSA Company Contribution 401k Plan with Employer Match Tuition Reimbursement 12 Paid Holidays Vacation Accrual Flexible Work Schedules for Most Positions Position Summary: The successful candidate analyzes, researches and designs components or a system of components, new products or to improve existing products while reducing cost, enhancing performance or facilitating manufacturing operations. Designs products or systems of moderate scope and complexity for assigned programs using a variety of engineering principles from mechanical, materials science or other engineering disciplines. Application of Design Engineer key responsibilities may include (but not limited to) any combination or work mix of: Original Equipment Manufacturer (OEM) production support. Aftermarket production and investigation support. New product introduction (NPI) design leadership. Internal or customer facing research and development (R&D). Key Responsibilities: Creates designs by analyzing product specifications, performance requirements, and existing manufacturing capabilities. Performs moderately complex design, fabrication, modification, and evaluation of components, subsystems, and systems by applying engineering principals and established analytical tools. May develop detailed designs by using sketches and descriptive transfer functions provided by others. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, contractual specification requirements, cost defining recommendations, and change proposals. Prepares or directs preparation of product layouts, detailed drawings, and assembly drawings by coordinating with designers or drafters, interpreting customer and functional requirements, and by using computer-aided design tools and following industry and drawing standards. Develops data and makes preliminary sketches, notes, and documentation in response to customer proposal requests. Reviews drawings and assembly models to ensure clarity, completeness, form, fit, function and conformity to standards, procedures and specifications. Identifies design errors, omissions and other deficiencies and recommends revisions and improvements to engineers or other designers. Conducts analyses and tests pertaining to the development of new designs, methods, materials or processes. Completes required documentation by applying engineering principles and company standards. Generates reports, procedures or change proposals. Lead and support field investigations. Work includes but is not limited to: Collaborate with AA TECH aftermarket partners on: Receiving, logging, documenting data and closing customer information gaps on returned fielded hardware. Fully define customer request and reason for return. Clarify any intended workscope and desired outcomes. Document and characterize as received fielded hardware condition. Define, plan and execute required sequence of tests and inspections. Tabulate and summarize data and test and inspection results. Direct, Coordinate, and Execute: Investigative plan (ie, cut up, NDT, visual inspection, chemical / material analysis). Review, document and summarize conclusions. Establish with team and appropriate stakeholders any relevant technical course of actions required to address findings. Support Design for Maintainability objectives. Support development of new aftermarket overhaul and repair processes. Support Leading Indicator Program objectives. Required Qualifications: Bachelor's degree (BS) in Mechanical Engineering, Aerospace Engineering or related engineering field. 6 or more years prior industry experience. Aerospace industry experienced preferred Society of Manufacturing Engineering (SME) or Mechanical Engineering (ASME) certification desired. Key Competencies: Ability to effectively function in cross-functional teams, communicate and present information to team members, team leaders and top management. Strong customer service and communication skills. General knowledge of aerospace industry or similar industry products and legal and regulatory requirements related to manufacturing environments. Due to the Company's military contractor status, the applicant must be a U.S. citizen or a permanent resident of the United States and must provide evidence of citizenship or immigration status upon applying for the position. Advanced Atomization Technologies, LLC is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, or any other consideration made unlawful by federal, state or local laws. ("Minority/Female/Disability/Veteran/VEVRAA Federal Contractor”). Typical Mental and Physical Demands: While performing the duties of this job, the employee is required to sit. The employee frequently is required to use hands to operate a computer. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. Also expected of the employee is regular attendance, the ability to work cooperatively and professionally with others and members of the public, and the ability to manage multiple tasks at once. The employee may be required to travel either domestically or internationally to fulfill key responsibilities described above.

We are currently hiring a Mechanical Engineer in our Building Engineering Division at our Rochester office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team to develop concepts, strategies, designs, drawings, specifications and reports for Building and Renovation projects. Duties System selection and calculations for design purposes Conduct field work to document existing conditions Work with Jr Engineers to develop drawings with building modeling software Work independently and as part of a team to complete project designs Construction phase services such as submittal review and site visits to monitor project progress Salary Range: $70,000 - $90,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements 4 - 6 years of experience working at an A/E consulting firm is preferred Bachelor's degree in Mechanical Engineering is preferred Well rounded experience in HVAC, plumbing, and fire protection Experience with Revit or AutoCAD is preferred Field experience is preferred New York State Professional Engineer's license is a plus Ability to work well with a team and good analytical skills Benefits Body, mind, and wallet-LaBella's benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. Flexible Work Schedule Health/Dental Insurance 401k Plan with Employer Match Short & Long Term Disability Profit Sharing Paid Time Off Leadership Development Program Fitness Reimbursement Tuition Reimbursement Referral Bonus Program Wellness Program Team Building Events Community Service Events

. The Role: GM Rochester is seeking a Facilities Engineer to serve as single-point-of-contact and owner of Facility needs, including managing services necessary for proper physical operation of Manufacturing Facilities. Typical functions include providing engineering support and troubleshooting for building equipment, property maintenance, utility supply, equipment installation, and environmental activities. Work is performed on-site in a Vehicle Components Manufacturing Plant where creativity, initiative, and independent judgment are exercised. What You'll Do (Responsibilities): * Provide technical direction to and oversee resident Business Partners and outside contractors to ensure safe work practices are followed when completing their work. * Oversee design, construction, integration, plant installation, successful launch and continuous improvement of Facilities equipment and tools. * Interface with regulatory agencies and municipalities. * Support maintenance and production on Continuous Improvement projects from the Facilities Engineering discipline * Support launch of new programs from equipment design until release to production * Bid & establish equipment installation contracts * Procure construction management resources * Manage scope changes through installation * Lead and support energy conservation activities * Maintain open communication between Rochester's team and corporate group * Drive strategic and analytical planning to optimize building and facility services * Provide technical direction to outside vendors * Improve Facility equipment uptime * Manage contractors through debug and release to production * Sound knowledge of tools, equipment, materials, methods, and standard practices of trades * Dependable appreciation of the importance of completing tasks on time * Consistently show innovative thinking that is customer-centric * Support plant safety initiatives * Understand GM's Workplace Safety System Elements & Performance Standards and how you support a safe environment through your work. You Skills & Abilities (Required Qualifications): * Bachelor's Degree in Engineering or equivalent experience in a manufacturing facilities environment * Able to read and work from blueprints * Strong knowledge of facilities operations, utilities equipment and various other central support equipment * Available to work alternative shift schedules, including weekends & holidays. What Will Give You a Competitive Edge (Preferred Qualifications): * Master's Degree in Engineering or Facilities Maintenance/Management or equivalent training/experience * 2+ year of experience in Facilities Engineering within a manufacturing or industrial environment * Willing to manage resident Business Partners and outside contractors, including holding responsible for errors, safety violations, and delays * Previous supervisory experience in a union environment GM does not provide immigration-related sponsorship for this role. Do not apply for this role if you will need GM immigration sponsorship now or in the future. This includes direct company sponsorship, entry of GM as the immigration employer of record on a government form, and any work authorization requiring a written submission or other immigration support from the company (e.g., H1-B, OPT, STEM OPT, CPT, TN, J-1, etc). This role is categorized as onsite. This means the selected candidate is expected to report to a specific location on a full-time basis. This job may be eligible for relocation benefits. About GM Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. Why Join Us We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. Benefits Overview From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources. Non-Discrimination and Equal Employment Opportunities (U.S.) General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire. Accommodations General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us or call us at ************. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Sign On Bonus Offered: $5,000 * terms & conditions apply Position assures that equipment is being maintained in an energy-efficient and safe manner, and downtime is reduced to a minimum by anticipation of necessary repairs and maintaining records of past operating experiences. Performs inspections and repairs to assigned property interior and exterior areas, including walls and flooring, installed fixtures, roofing systems, lighting, etc. The Engineer will perform at the highest of ethical standards, reflecting the core values of C&W as defined in its Business Code of Conduct, Policies and Procedures Manual, and other related company policies. This is a non-supervisory/ hourly / non-exempt role. Responsibilities * Ensure ongoing preventive maintenance and repair work orders on facility mechanical, electrical, lighting, and other installed systems, equipment, and other components. * Maintain, operate, and repair all HVAC systems and associated equipment, electrical distribution equipment, plumbing systems, building interior/exterior repair, and related grounds as it pertains to assigned client buildings. * Performs HVAC repairs including compressor replacement, condenser replacement, evaporator coil replacement, condenser coil replacement, etc. * Perform assigned facility inspections and due diligence efforts, reporting on as-found conditions impacting satisfactory client occupancy and operations. * Respond effectively to all emergencies. May require light travel during emergency events. * Maintain stock and inventory control. * Recommend improvements to the preventive maintenance program on an ongoing basis. * Ensure the management team is informed of current building operations by compiling and submitting monthly reports. * Study and become familiar with the various items of equipment for assigned client locations, and the methods required to use them properly to ensure required ongoing daily client activities. To include building automation systems, fire/life safety systems, and any other building-related equipment as needed. * Recognize danger and safety hazards and propose methods to eliminate them or use the correct PPE in performing the task needed. * Comply with all applicable codes, regulations, governmental agencies, and company directives related to building operations and practicing safe work habits. * Must maintain all Federal, State, or Local licenses required for locations assigned. • Complete all required C&W Safety Training as scheduled annually. * Comply with C&W Uniform Dress Code while working and maintain a neat and clean appearance during all working hours. * Other assigned operational tasks may be typically expected of the Building Engineer role. KEY COMPETENCIES * Communication Proficiency (oral and written) • Organization Skills • Technical Proficiency • Problem Solving/Analysis * Sense of Urgency Related requirements Any combination of education and experience that would provide the required knowledge and abilities is qualifying. A typical way to obtain knowledge and abilities would be: Education A High School Diploma or GED Equivalent is required. Graduate of an apprentice program or trade school preferred is preferred. Years of Relevant Experience Minimum of four (4) years of technical experience in all aspects of building engineering with a strong background in technical aspects of HVAC equipment and systems, plumbing, electrical, equipment repair and maintenance, and overall system design and application as referenced above. Licenses or Certifications * Candidate must possess and maintain a valid state driver's license. * Possess a valid "Universal" level certification for CFC and HFC-based refrigerants (EPA Section 608); to service, repair, or dispose of equipment that could release Knowledge, Skills & Abilities * Experience in operation, maintenance, and basic repair of HVAC, boilers, heaters, pumps, refrigerant systems, compressors, gas lines, water systems, and the like. Specifically competent with Liebert air conditioning equipment. * Knowledgeable in energy management systems, techniques, and operations. * Thorough knowledge of all building systems operations, maintenance, and repair. * Excellent interpersonal skills in dealing with tenants, clients, and vendors. * Basic Computing Skills in Outlook, Excel & Word, including proficiency in the operation of smartphone and/or iPad/tablet, uploading .pdf files, and documents, and logging into conference meetings (e.g., BlueJeans, Teams Meetings, Zoom). Physical Work Requirements The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential job functions: Environment: This job operates in a professional office or commercial building environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets, and fax machines. Work could any combination of: * Almost constant exposure to loud noise includes the use of power equipment and unusual elements, such as extreme temperatures, toxic chemicals, biohazardous materials, dirt, dust, fumes, smoke, and/or loud noises. * Ability to perform work wearing Personal Protective Equipment (PPE) if required * May require regular travel outside between properties in varying weather conditions. Physical: Considerable physical activity. Ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders), and safely install rigging/lifting devices. Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine. May involve movement between departments, floors, and properties to facilitate work. Should maintain the ability to speak clearly so others can understand you as week as the ability to read and understand the information presented orally and in writing. Vision: See in the normal visual range with or without correction; vision sufficient to read computer screens and printed documents. Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics. Hearing: Hear in the normal audio range with or without correction. Scheduling Most schedules work typical business hours based on location assigned. Based on client need, this role may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require over time with very busy periods June through August. Must be willing and able to support after-hours/weekends building-related activity as required. The role may be assigned and must be able to respond to client callbacks for regular repair and/or emergencies events. Other Duties This job description is not designed to cover or contain a comprehensive list of activities, duties, or responsibilities that are required of the employee. Other duties, responsibilities, and activities may change or be assigned at any time with or without notice. Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements. The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate's experience and qualifications. The company will not pay less than minimum wage for this role. The compensation for the position is: $36.55 - $43.00 Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated. In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at ************** or email ***********************. Please refer to the job title and job location when you contact us. INCO: "Cushman & Wakefield"

As a member of our Professional Services team, you will assist in the building, deploying, and maintaining of critical customer applications. In this role, you will provide thought leadership and hands-on technical execution to optimize client environments and ensure robust, scalable applications. Responsible for:-Assisting in the designing and building modern and highly scalable cloud-based applications for customers-Migrating and modernizing customer legacy applications using AWS services-Working with Project Managers and clients to provide recommendations and technology roadmaps to meet their business needs-Actively participating in team meetings and cross-functional interactions-Keeping team members and supervisors informed of progress and issues-Actively contributing to client project status meetings-Contributing to R&D projects to validate/invalidate new services offerings-Remaining current with technology trends and new technologies-Proposing the latest technology usage and integration standards-Developing and managing backend infrastructure, APIs and integrations to support cloud-based solutions, using programming languages like Python, Java, and PHP-Participating in code reviews, document infrastructure-as-code, and assist with UI/UX-Building out frontend interfaces and dashboards for applications and infrastructure using languages like Angular and React-Utilizing best practices for security, compliance, and business continuity in cloud solutions How you will be successful:-Bridging the gap between technical complexity and business objectives through adept problem-solving abilities-Building trusting relationships with team members and collaborating departments-Comfortable with pushing boundaries and technical limits (maintain technical aptitude and knowledge of industry)-Confidently communicating with diverse stakeholders to translate requirements into impactful outcomes-Championing ongoing elevation of personal skills paired with knowledge transfer to teammates-Having the ability to rapidly learn new languages, frameworks, or business domains as needed to meet the diverse needs of multiple clients Requirements of the role:-5+ years' experience as a cloud engineer with hands-on expertise across AWS cloud services-Strong experience with infrastructure-as-code tools like CloudFormation-Experience coding in multiple languages including Node.js, Python, Angular, React, .NET Core, .NET Framework-Experience using AWS platforms including but not limited to Cognito and Amplify-Understanding of modern app architectures in cloud environments-Able to collaborate with cloud engineer and project management teams-AWS Certification(s) a must have (can be obtained upon hire) - minimum requirement at 90 days is AWS Certified Developer Associates-In-depth experience with one or more programming languages like Java, JavaScript, Python, C# used for developing cloud-native applications.-Understanding of cloud computing concepts - IaaS, PaaS, serverless, containers etc.-Working knowledge of Amazon Web Services - key services like EC2, S3, Lambda, API Gateway, ECS, Fargate, RDS etc.-Experience using AWS command line tools and SDKs to manage infrastructure as code-Building, deploying, managing microservices applications on AWS-Working with AWS data storage solutions like DynamoDB, NoSQL, and Aurora RDS-Experience with containers & orchestration platforms like Docker, Kubernetes on AWS Security best practices for applications in the public cloud Additional Valuable Skills: -Experience with CI/CD pipelines and automated testing-Building event-driven architectures on cloud platform-Using infrastructure as code tools like CloudFormation -Frontend JavaScript frameworks like React-Machine learning capabilities like SageMaker-Leveraging serverless architectures where applicable The salary range provided is a general guideline. When extending an offer, Innovative considers factors including, but not limited to, the responsibilities of the specific role, market conditions, geographic location, as well as the candidate's professional experience, key skills, and education/training.

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military