Operations engineer jobs in Orlando, FL

We are currently recruiting a full-time Senior Mechanical Engineer located in Orlando, FL. MUST HAVE 10 YEARS OF EXPERIENCE. Position offers a competitive salary and robust recruitment package. RESPONSIBILITIES: Responsible for system design from blank sheet of paper to create concept of mechanical components based on project requirements Experience doing design via 3D modeling software (SolidWorks preferred) Provide input, and system modification as needed, for system integration with other project disciplines Manage vendor scope to verify safety, functionality, and all contract requirements are satisfied. Ensures design complies with any local or government agency design/implementation codes in addition to client codes/standards. Project technical risk assessment document generation and mitigation implementation Design and analysis for safety critical parts within a mechanical system. Designing redundant mitigations in system to increase safety and reliability. Designing systems with complex motion and integration from automated systems. Develops documents of system configuration and design. Documents include Description of operation, Detailed mechanical system design description, analysis reports, system implementation/acceptance test plans, system routine maintenance/job plans Ability to design and troubleshoot pneumatic and hydraulic systems Ability to perform system analysis/calculations including Stress, fatigue, reliability, life expectancy, tolerance studies Knowledge of ride system design for attractions involving guests is preferred Capable of working off shifts as needed during installation/commissioning to support project. QUALIFICATIONS: Must be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters. Education: Bachelor's degree in mechanical engineering. (Bachelor's degrees in other disciplines may be acceptable if work experience is directly related to mechanical engineering. Disciplines outside of the mechanical area will not be considered) Experience: 10+ years of experience in mechanical engineering roles At least 3+ years of experience in mechanical design from scratch or major modifications (50+% redesign)

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. At the heart of Defining Possible is our commitment to missions. In rapidly changing global security environments, Northrop Grumman brings informed insights and software-secure technology to enable strategic planning. We are looking for innovators who can help us keep building on our wide portfolio of secure, affordable, integrated, and multi-domain systems and technologies that fuel those missions. By joining in our shared mission, we 'II support yours of expanding your personal network and developing skills, whether you are new to the field, or an industry thought leader. At Northrop Grumman, you 'II have the resources, support, and team to do some of the best work of your career. Northrop Grumman Mission Systems is seeking a talented **Facilities Engineer** to join our team in **Apopka, FL** . The Facilities Engineer plans, designs and oversees the reconfiguration, maintenance, and alteration of equipment, machinery, buildings, structures, and other facilities. Gathers and reviews data concerning facility or equipment specifications, company or government restrictions, required completion date, and construction feasibility. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation, and other related costs. Inspects or directs the inspection of construction and installation progress to ensure conformance to established drawings, specifications, and schedules. **The position can be filled at a Level 2 or 3.** Basic Qualifications for a Level 2: + Bachelor's degree and a minimum of 2 years of relevant experience + Experience with building automation control systems supporting manufacturing operations + Experience with building power and electrical distribution systems + Experience with building mechanical systems operations (HVAC, chillers, cooling towers, AHU, RTU, compressed air) Basic Qualifications for a Level 3: + Bachelor's degree and a minimum of 5 years of relevant experience; OR a Master's degree and 3 years of relevant experience + Experience with building automation control systems supporting manufacturing operations + Experience with building power and electrical distribution systems + Experience with building mechanical systems operations (HVAC, chillers, cooling towers, AHU, RTU, compressed air) Preferred Qualifications: + Above listed experience in both manufacturing and office environments + Electrical or Mechanical Engineering degree + Knowledge of building automation control systems (Siemens or Honeywell) + Experience with building maintenance management and tracking systems (work orders, CAFM, PM scheduling) + Knowledge of AutoCAD + Experience with external vendors and contractors supporting facility infrastructure operations Primary Level Salary Range: $70,200.00 - $105,400.00 Secondary Level Salary Range: $86,600.00 - $130,000.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

We have a Mechanical Engineer position open in Orlando, FL. This position is responsible for mechanical engineering on large-scale projects. Project requirements involving mechanical system design from scratch, analysis/calculations (stress/fatigue/etc.), acceleration forces, load calculations, material stress design, failure and effects analysis, risk assessment, component selection, and mechanical system installation/commissioning. RESPONSIBILITIES: Must be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters Designs, develops, and implements fully integrated mechanical assembly systems to meet process requirements. As well as complying with any local or government agency design/implementation codes Knowledge of analyzing system design for Hazard analysis development and mitigation Understanding of Class 1 parts in order to minimize their need and optimize redundancy minimizing single points of failure Develops documents of system configuration and design. Documents include Theory/Description of operation, Detailed mechanical system design description, system implementation/acceptance test plans, system routine maintenance/job plans Develops drawings of mechanical design, assemblies, and installation procedures on AutoCAD and/or SolidWorks software Ability to design and troubleshoot pneumatic and hydraulic control systems Ability to perform system analysis/calculations including Stress, fatigue, reliability, life expectancy, tolerance studies Knowledge of ride system design requirements for attractions involving guest accelerations, reach envelope, ingress/egress, weight, and emergency evacuation analysis and implementation upon control system failure in worst-case scenarios Will assist with the initial start-up and debugging of integrated systems and the development of system documentation Individual will be working on system integration projects for clients in industries such as entertainment and manufacturing Will act as technical lead on projects and guide lower-level engineers, technicians, and contractors Will act as Project Manager on smaller projects ranging from $50k to $250k. This includes but is not limited to: Develops and executes implementation plans for the project Assigns work to meet overall project deadlines Ensures that all project team members clearly understand the scope of W-M responsibilities Develops schedules for W-M and customer requirements Evaluates progress on project(s) and details changes Responsible for all purchasing and subcontractor requirements Responsible for the development of costs and proposal of change orders to contract scope Qualifications QUALIFICATIONS: Education - Bachelor's Degree in Mechanical Engineering. Experience - 5+ years in the following areas is preferred: An in-depth understanding of mechanical systems, components, stress analysis, acceleration forces, and knowledge of amusement ride safety standards (ASTM Standards). Experience with AutoCAD and SolidWorks is also desired Key Competencies - Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving Skills - All employees are required to be proficient in the use of Microsoft Windows and Office environments TRAVEL: Ability to travel up to 35% PHYSICAL DEMANDS OF POSITION: Seeing, color perception, hearing, listening, clear speech, dexterity in hands, driving, lifting, climbing, ability to mount and dismount equipment, pushing, and pulling. WORKING ENVIRONMENT/CONDITIONS: Standard office environment, On-site office environment, and diverse industrial environments. Frequent PC usage, fax machines, copy machines, and phones. Additional Information All your information will be kept confidential according to EEO guidelines.

What you do at AMD changes everything We care deeply about transforming lives with AMD technology to enrich our industry, our communities and the world. Our mission is to build great products that accelerate next-generation computing experiences - the building blocks for the data center, artificial intelligence, PCs, gaming and embedded. Underpinning our mission is the AMD culture. We push the limits of innovation to solve the world's most important challenges. We strive for execution excellence, while being direct, humble, collaborative and inclusive of diverse perspectives. This is who we are at our best. One Company. One Team. AMD together we advance_ What you do at AMD changes everything At AMD, we push the boundaries of what is possible. We believe in changing the world for the better by driving innovation in high-performance computing, graphics, and visualization technologies - building blocks for gaming, Immersive platforms, and the data center. Developing great technology takes more than talent: it takes amazing people who understand collaboration, respect, and who will go the “extra mile” to achieve unthinkable results. It takes people who have the passion and desire to disrupt the status quo, push boundaries, deliver innovation, and change the world. If you have this type of passion, we invite you to take a look at the opportunities available to come join our team. Physical Design Engineering-GPU THE ROLE: The position will involve working with a very experienced physical design team of AMD graphics core and is responsible for delivering the physical design of tiles to meet challenging goals for frequency, power and other design requirements for AMD next generation graphics processors in a fast-paced environment on cutting edge technology. THE PERSON: Physical design Engineer with strong analytical thinking and problem-solving skills with excellent attention to detail. The candidates should have excellent communication skills, very good team player with very strong technical knowledge and execution experience of Synthesis and Physical design of high speed designs KEY RESPONSIBILITIES: Physical design of complex GPU multi-millions gate design and achieve required performance, area and power targets Work with RTL design to analyze potential bottlenecks for frequency, resolve LOL and timing issue upfront in the project cycle to achieve frequency targets Handling Floor-plan, Physical Implementation of Power-plan, Synthesis, Placement, CTS, Timing Closure, Routing, Extraction, Physical Verification (DRC & LVS), Crosstalk Analysis, EM/IR Handling different PNR tools - Synopsys ICC2, ICC, Fusion Compiler, PrimeTime, StarRC, Mentor Graphics Calibre, Apache Redhawk, Cadence Innovus, genus PREFERRED EXPERIENCE: 7+ years of professional experience in physical design, preferably with high performance designs. Experience in automated synthesis and timing driven place and route of RTL blocks for high speed datapath and control logic applications. Experience in automated design flows for clock tree synthesis, clock and power gating techniques, scan stitching, design optimization for improved timing/power/area, and design cycle time reduction. Experience in floorplanning, establishing design methodology, IP integration, checks for logic equivalence, physical/timing/electrical quality, and final signoff for large IP delivery Strong experience with tools for logic synthesis, place and route, timing analysis, and design checks for physical and electrical quality, familiarity with tools for schematics, layout, and circuit/logic simulation Experience in leading team of Engineers for design closure is preferred Versatility with scripts to automate design flow. Strong communication skills, ability to multi-task across projects, and work with geographically spread out teams Experience in FinFET & Dual Patterning nodes such as 16/14/10/7/5nm Excellent physical design and timing background. Experience in RTL design and LOL reduction is preferred Good understanding of computer organization/architecture is preferred. Strong analytical/problem solving skills and pronounced attention to details. Proficient in perl, python, tcl etc ACADEMIC CREDENTIALS: Bachelors or Masters in Electronics/Electrical Engineering LOCATION: Orlando, Santa Clara, Folsom, San Diego, Boston, Austin, Markham Canada #LI-PH1 Requisition Number: 182705 Country: United States State: Florida City: Orlando Job Function: Design Benefits offered are described here. AMD does not accept unsolicited resumes from headhunters, recruitment agencies or fee based recruitment services. AMD and its subsidiaries are equal opportunity employers. We consider candidates regardless of age, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third party affiliation, sex, pregnancy, sexual orientation, gender identity, military or veteran status. Please click here for more information.

**A Snapshot of Your Day** As part of Service Engineering, leading technical clarification support for Gas Turbine components. Technical support includes ownership of risk assessments for hot side parts in operation of gas turbines and provide direction to our commercial teams for outage preparation. **How You'll Make an Impact** + Assess the degradation of turbine hardware and communicate risk back to field service and commercial teams. + Review findings with customers to explain operational risks based on part condition. + Document component damage and feedback service experience to design engineering. + Review outage plans and scope for component hardware installed in unit and provide recommendations for exchange of hardware. + Direct impact on Service business success by improving customers' ability improve engine reliability. + Perform Root Cause Analysis (RCA's) on components when they don't meet life expectancy. + Provide technical support for manufacturing product and process deviations. + Manage Risk Database. Review current risks and compare them with findings within fleet and recommend updates. + Review current status of part life and coordinate life assessments to update part life model. Communicate these updates to affected teams. + Interfaces include, but are not limited to, Manufacturing, Field Service, Procurement, LTP, Open Market, Fleet, Design Engineering, Internal and External Customers. **What You Bring** + Bachelor's Degree in Mechanical Engineering, Aerospace Engineering, Materials Engineering or related. 10+ years of technical experience; strong technical approach. + Proficient at collaborating with diverse groups. Ability to effectively work with customers and manufacturing shops. + Strong problem-solving and interpersonal skills. + Experience in gas turbine components, preferred hot side GT components. + Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. **Your opportunities for personal growth** + Gain in-depth Manufacturing experience on repair processes. + Grow network in Gas Services Engineering and Manufacturing Organizations. + Develop or strengthen project management skills. + Potential for direct external customer interaction! **About the Team** **Gas Services** Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. **Who is Siemens Energy?** At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: ******************************************** **Rewards** + Career growth and development opportunities; supportive work culture + Company paid Health and wellness benefits + Paid Time Off and paid holidays + 401K savings plan with company match + Family building benefits + Parental leave ************************************ Equal Employment Opportunity Statement Siemens Energy is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

It all started in sunny San Diego, California in 2004 when a visionary engineer, Fred Luddy, saw the potential to transform how we work. Fast forward to today - ServiceNow stands as a global market leader, bringing innovative AI-enhanced technology to over 8,100 customers, including 85% of the Fortune 500 . Our intelligent cloud-based platform seamlessly connects people, systems, and processes to empower organizations to find smarter, faster, and better ways to work. But this is just the beginning of our journey. Join us as we pursue our purpose to make the world work better for everyone. Job Description This is a Flexible position based in our Orlando, Florida office. Our Flexible work persona requires a minimum of 2 days per week in the office. In addition, this position requires shifts that cover weekend days. Please Note: This position will include supporting our US Public Sector customers. “This position requires passing a ServiceNow background screening, USFedPASS (US Federal Personnel Authorization Screening Standards). This includes a credit check, criminal/misdemeanor check and taking a drug test. Any employment is contingent upon passing the screening. Due to Federal requirements, only US citizens, US naturalized citizens or US Permanent Residents, holding a green card, will be considered. The ServiceNow PSE (Production Service Engineering) team is a group of highly technical engineers who are tasked with maintaining and supporting the reliability, scalability and performance of the automations and platform to manage the ServiceNow cloud infrastructure. Our engineers are empowered to drive technical resolutions across the technology stack of the cloud infrastructure and instance automations. They are also tasked with driving forward the operability and reliability of the automations to drive down the number of incidents and to reduce MTTR. To accomplish this our engineers, combine solid analysis and troubleshooting skills, software development, networking and systems engineering expertise with a strong desire to be challenged by problems of scale and complexity and to make services better for our customers. What you get to do in this role: Investigate, Support and Provide sustainable resolution to issues within our cloud infrastructure and application stack. Use your experience in software development, systems engineering and networking to proactively prevent repeatable issues. Drive initiatives with partner teams to improve the reliability and performance of the cloud infrastructure through improved system design. Drive a culture of intolerance to manual activity which results in a highly automated environment delivering scalable solutions. Mentor and Coach other team members. Important Note on the Role: Availability for weekend shifts: Must be able to work weekends, with corresponding days off during the week. Willing to work 4 x 10 or 5 x 8 including weekends. Required to be on-call as needed. Qualifications To be successful in this role you have: Experience in leveraging or critically thinking about how to integrate AI into work processes, decision-making, or problem-solving. This may include using AI-powered tools, automating workflows, analyzing AI-driven insights, or exploring AI's potential impact on the function or industry. 8+ years of experience with a Bachelor's degree or 6+ years of experience with a Master's degree in enterprise technical systems support, operations and development. Expert knowledge of Linux systems. Coding in one or more of these languages - JavaScript, Python, Java and Bash. Understanding of Networking services and protocols - Routing, Load Balancing, DNS, SNMP, HTTPS, TCP/IP, etc. Working knowledge in one or more of the databases - Postgres, MySQL, Maria DB, Oracle. Web application / API development and operations experience. Experience in using Splunk for analysis and reporting. Strong troubleshooting, analysis and problem-solving skills. Agile methodologies and software development lifecycle experience. Familiarity with Cloud Technologies - AWS, Azure, GCP or OpenStack. Metric-driven mindset. Engage with customers and partners to drive resolutions and efficiency. Good knowledge of Observability and Monitoring Nice to Have: Experience working with Container and Container Orchestration Platforms (Docker, Kubernetes). Experience developing on the ServiceNow Platform Knowledge in nginx, Kafka, Grafana, Prometheus. Knowledge in Ansible, Puppet, Terraform. Soft Skills: Self-motivated and having a customer support mindset. Team-first attitude and uncompromising attention to detail. Strong leadership and mentoring capabilities, with experience guiding cross-functional teams. Excellent communication and problem-solving skills, with the ability to explain technical concepts to non-technical stakeholders. Passion for innovation and improving AI-driven user experiences Additional Information Work Personas We approach our distributed world of work with flexibility and trust. Work personas (flexible, remote, or required in office) are categories that are assigned to ServiceNow employees depending on the nature of their work and their assigned work location. Learn more here . To determine eligibility for a work persona, ServiceNow may confirm the distance between your primary residence and the closest ServiceNow office using a third-party service. Equal Opportunity Employer ServiceNow is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex, sexual orientation, national origin or nationality, ancestry, age, disability, gender identity or expression, marital status, veteran status, or any other category protected by law. In addition, all qualified applicants with arrest or conviction records will be considered for employment in accordance with legal requirements. Accommodations We strive to create an accessible and inclusive experience for all candidates. If you require a reasonable accommodation to complete any part of the application process, or are unable to use this online application and need an alternative method to apply, please contact [email protected] for assistance. Export Control Regulations For positions requiring access to controlled technology subject to export control regulations, including the U.S. Export Administration Regulations (EAR), ServiceNow may be required to obtain export control approval from government authorities for certain individuals. All employment is contingent upon ServiceNow obtaining any export license or other approval that may be required by relevant export control authorities. From Fortune. ©2025 Fortune Media IP Limited. All rights reserved. Used under license.

Must Have Technical/Functional Skills * Over 5 years of experience in Power system applications (Generation) : Automatic Generation Control (AGC), Load Frequency Control, Load Forecasting, Economic Dispatch, Power Flow, State Estimator, Contingency analysis, Operator Training Simulator (OTS). * Hands-on expertise preferably on GE PowerOn Reliance (XA21) and/or AEMS/GDC Platform Software, as well as EMS of any equivalent platforms from Siemens, OSI, ABB, Schneider etc. * Proficient in both Linux and Windows operating environments * Experience with communication protocols: IEC 60870-5-101/104, DNP3, Modbus, ICCP, OPC. * Experience of working with relational databases such as Oracle and SQL Server. * Experience in programming languages for system integration or scripting, such as C, C++, PERL, or similar. * SQL, shell scripting, and ability to read and interpret logs and debug files. * Must have experience in picking up and installing fixes on live customer systems * Strong troubleshooting & debugging skills Roles & Responsibilities * Administer and optimize Energy Management System (EMS) system through application configuration, tuning and security patching. * Perform necessary technical corrective actions to restore failed or failing technical services on EMS system. * Conduct code review, deployment, testing and monitoring of break/fix patches and modification. Base Salary Range: $100,000 - $150,000 per annum TCS Employee Benefits Summary: Discretionary Annual Incentive. Comprehensive Medical Coverage: Medical & Health, Dental & Vision, Disability Planning & Insurance, Pet Insurance Plans. Family Support: Maternal & Parental Leaves. Insurance Options: Auto & Home Insurance, Identity Theft Protection. Convenience & Professional Growth: Commuter Benefits & Certification & Training Reimbursement. Time Off: Vacation, Time Off, Sick Leave & Holidays. Legal & Financial Assistance: Legal Assistance, 401K Plan, Performance Bonus, College Fund, Student Loan Refinancing. #LI-SV2 #LI-KUMARAN

Full-time Description Boat Company With over 100 years of excellence, Nautique Boat Company, a subsidiary of Correct Craft, is recognized globally for building the world's finest ski and wake boats. Since 1925, we've led the marine industry through innovation, superior craftsmanship, and a dedication to quality. Beyond our boats, we're driven by purpose. Through Nautique Cares, we contribute to causes both locally and around the globe improving that performance, people, and philanthropy go hand-in-hand. Learn more at ***************** Job Description: The CAD Engineer II plays a key role in developing and managing 3D CAD models and technical drawings that support product design, engineering, and manufacturing processes. This mid-level role emphasizes 3D modeling as a primary responsibility, ensuring accurate, functional digital representations of parts, assemblies, and systems. Working with moderate supervision, CAD Engineer II transforms rough design concepts into complete and detailed CAD deliverables, while coordinating closely with engineering and design teams to ensure quality and compliance with specifications. Key Responsibilities: Utilize CAD software to create 2D and 3D models using SolidWorks or similar CAD software. Collaborate with more senior engineering and project managers to understand the design requirements. Ensure compliance with relevant regulations, standards, and company policies throughout the design process. Works on projects of moderate to high complexity with support. Generate engineering models, drawings, and bills of materials for new designs under direction. Interpret engineering sketches, layouts, and verbal instructions to produce accurate CAD outputs. Maintain organized project files and documentation for easy access and review. Approve mechanical models and drawings for release. Creates 3D models for tooling. Resolve discrepancies between design intent, markups, and final deliverables. Assist in the development and design of composite parts and molds. Generate engineering change notices as required. Evaluate vendor-supplied items for their suitability regarding fit, finish, and performance. Gain exposure to some of the more complex tasks within the job function. Complete other functions assigned by supervisor. Skills and Abilities: Proficiency in CAD software, particularly SolidWorks. Strong understanding of mechanical design principles and materials. Ability to create and interpret technical drawings and specifications for productions product requests. Strong interpersonal, written, and verbal communication skills with the ability to work closely with all members of the organization. Demonstrated organization and project management skills. Strong analytical and conceptual thinking skills. Problem-solving skills and willingness to take initiative for decisions. Ability to juggle and manage competing tasks and demands and deal with frequent changes, delays, or unexpected events. Requirements Knowledge, Education, and/or Experience Required: BS in Mechanical Engineering or related technical field. Demonstrated proficiency in 3D CAD Modeling experience, preferably SolidWorks and NX. 2 to 4 years of CAD experience within a manufacturing environment. Understanding of engineering principles and design practices. Desire to work in a “hands-on” environment. Knowledge, Education, and/or Experience Preferred Experience in the marine industry. Experience with the development of composite parts. Knowledge of composite molding process. Experience with technical drawings and documentation. Ability to trailer a boat and operate. Physical Demands Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature occasionally. Must be able to bend at the waist and knees and stand for extended periods of time. Must be able to lift 25 pounds when necessary. This is a safety-sensitive position. Additional Requirements: Must be a licensed driver with a good driving record (subject to MVR). Americans with Disability Specifications The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be exposed to weather conditions, a normal office environment, or a factory environment that is not climate controlled. The noise level in the work environment is usually moderate. The factory in certain areas maintains a high fiberglass and dust environment. Personal Protective Equipment might be required in certain areas of the factory including but not limited to safety glasses, respirators, hearing protection, gloves, and protective garments. Employees in safety-sensitive positions must report to work fit for duty and must remain fit for duty throughout their workday. To be fit for duty, the employee must not be impaired by alcohol, illicit drugs, or medication. Equal Employment Opportunity Employer Nautique Boat Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Nautique Boat Company complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Nautique Boat Company expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Nautique Boat Company's employees to perform their job duties may result in discipline up to and including discharge.

To be eligible to enlist in the U.S. Navy, candidates must be between the ages of 18-34 The most powerful energy sources in the world need the most powerful minds behind them. As a Nuclear Reactors Engineer, youll be responsible for researching, designing, maintaining, operating and regulating the nuclear reactors and power plants that drive the most advanced fleet of submarines and aircraft carriers on Earth. Here, you can fuel a passion for problem-solving by defining and redefining the cutting edge of nuclear propulsion, while setting the standard in nuclear reactor research and regulation. RESPONSIBILITIES Naval Reactors Engineers have oversight of the Navy's entire fleet of nuclear-powered ships as well as shore-based prototypes and nuclear propulsion support facilities for Americas Navy. The wide array of technical areas involved in the Naval Nuclear Propulsion program include: Reactor and fluid systems design Reactor physics Materials development Component design such as steam generators, pumps and valves Instrumentation and control of reactor, steam and electric plants Testing and quality control Shielding Chemistry and radiological controls As a Navy Reactors Engineer stationed at Naval Reactors Headquarters in Washington, D.C., you will provide technical oversight while managing projects ranging from reactor design to fleet operations to de-fueling and decommissioning warships. PAY AND BENEFITS From the day you start, youll receive: Competitive salary Free health insurance Free housing A retirement plan 30 days paid vacation per year EDUCATION OPPORTUNITIES In addition to the best-in-class training and state-of-the-art facilities, current undergrad students who meet the prerequisite background will also get the chance to get paid while finishing school through the Nuclear Propulsion Officer Candidate (NUPOC) program. Students in majors like mathematics, engineering, physics and chemistry may receive preferred acceptance into the program. If accepted into the NUPOC program as an aspiring Naval Reactors Engineer, you can: Receive a salary in excess of $4,000 per month for up to 18 months prior to your college graduation Receive an immediate one-time sign-on bonus of $15,000 Enjoy military health care benefits while you are a student in the program Postgraduate Education Opportunities As a Naval Reactors Engineer, once youre out of school youll have a position waiting as a respected professional and Officer affiliated with the most accomplished nuclear program on earth. Beyond undergraduate and formal Navy training and education, you can pursue additional graduate education through the following: Post-9/11 GI Bill Navy Tuition Assistance Program Completing Joint Professional Military Education (JPME) at one of the various service colleges Using Tuition Assistance to attend online or in-person graduate programs during shore assignments. Navy College Program VOLED Assistance Center VOLED Region Advisors The Naval Postgraduate School (NPS) Navy War College (NWC) USAF Air University Air Command and Staff College QUALIFICATIONS AND REQUIREMENTS U.S. citizen between the ages of 19 and 29. Exceptions may be possible up to age 40. Graduate or current student pursuing a B.A., B.S. or M.S. (preferably major in mathematics, engineering, physics, chemistry or other technical areas). Those still in school may apply as early as 18 months from completion of an undergraduate degree for Naval Reactors Engineers. Applicants may also join the NUPOC program as early as 12 months from completion of a master's degree. Additional academic requirements include: Completed one academic year of calculus Completed one academic year of calculus-based physics A competitive GPA and a minimum grade of "B" in all technical courses General qualifications may vary depending upon whether youre currently serving, whether youve served before or whether youve never served before. WORK ENVIRONMENT Preliminary training and eventual staff assignments center around Naval Reactors Headquarters at the Navy Yard in Washington, D.C. At Headquarters, you will be a part of an elite, streamlined staff of roughly 500 people who oversee the entire Naval Nuclear Propulsion Program from cradle to grave. Even junior-level Naval Reactors Engineers assume responsibility for key technical work in a variety of state-of-the-art facilities, including: Two Department of Energy laboratories Two nuclear prototype/training sites Nearly 100 nuclear-powered ships and submarines Six shipyards More than 1,000 firms that support the Naval Reactors Program RequiredPreferredJob Industries Government & Military

Require a Defensive Cyber Operations (DCO) SME with a desire to actively defend the mission systems critical to our national defense. As a senior engineer the candidate will lead individuals towards common goals and work with engineers to apply extensive expertise on multiple complex work assignments. Assignments may be broad in nature, requiring originality and innovation in determining how to accomplish tasks. Leads the development of DCO methodologies and presents solutions to problems. Contributes to deliverables and performance metrics where applicable. Consults on IT and cyber defensive architecture and technologies. Assesses assigned cyber key terrain to thoroughly understand the mission, architecture and associated threat. Advises on technical design and implementation of DCO capabilities required to effectively protect, detect and respond to cyber threats and attacks. Researches cyber defense technologies for best fit based on mission, architecture and current threat. Leads the design, implementation, configuration and/or tuning of cyber defensive technology. Authors documentation to include SOPs, checklists, implementation guides, architecture diagrams, crew binders, etc. to support DCO. Adapts technologies to meet the mission architecture and threat. Mid-Level Required Experience: 5 years of technical experience in cyber-defense or cyber security related fields (e.g., engineering, networking, systems integration, solutions etc.). 5 years of professional technical experience (these years may be in conjunction with #2) Experience years must come from at least 2 of the following areas: -Container or virtual environments (e.g. Docker, Kubernetes, VMware, AWS) -In-band and out-of-band test access points for network traffic collection and aggregation (e.g. Gigamon) -Data storage solutions (e.g. NFS storage, distributed storage, Ceph Ruck storage, etc.) -Data-analysis toolsets (e.g. Elastic Search, Logstash, Kibana, Splunk, etc.) -Agile frameworks for software development, -Linux operating systems (Red Hat, Kali, etc.), -Windows operating systems, -Network infrastructure, -Security applications (Security Orchestration, Automation, and Response [SOAR], Security Information and Events Management [SIEM], Intrusion Detection Systems [IDS], etc.) Key qualifications and skills: Hands-on experience configuring and troubleshooting network devices (Cisco experience is essential for this role, CCNA or higher would be great). Experience with Gigamon is a plus, but it is not required and can be learned on the job. Demonstrated ability to review and harden network topologies, including secure configuration and vulnerability assessment. Experience creating and updating network topologies and diagrams, ideally using Microsoft Visio. Exposure to or experience with STIGs. Additional skills that would be of benefit: Ability to work cross-functionally with security and IT teams and to communicate technical issues clearly to non-technical clients. Familiarity with protocols such as TCP/IP, VLANs, OSPF, and VRF technologies. Experience with common firewalls (e.g., Cisco ASA, Fortinet, Palo Alto), including rule creation and troubleshooting. Exposure to intrusion detection and prevention systems, and the ability to interpret alerts. Familiarity with IT change control and documentation best practices.

Do you thrive in a role tasked with a wide variety of maintenance and repair projects and where you tackle different challenges each day? Our Facility Engineer is responsible for: keeping our clubs well maintained and safe, supporting and managing all mechanical systems to ensure proper function systems include HVAC, plumbing, boilers, and more, and providing a positive, inviting experience for our members and guests. If you enjoy implementing safe and well-functioning spaces and want support to continue to grow your expertise, we invite you to join our team. Job Duties and Responsibilities Inspects repairs and maintains HVAC equipment, plumbing, electrical systems and recreational pools Ensures chemistry and temperature control of the recreational pools comply with state, local and company requirements Ensures the safety of buildings, staff and members by ensuring fire and alarm protection devices follow the standards of local & state regulations and building codes Responds to repair requests and prioritizes emergency repairs Records all repair and preventative maintenance into the CMMS software Position Requirements 3 to 4 years of facility maintenance experience or equivalent training State approved Boiler/Engineers License preferred CFC certification, Aquatics Facilities Operator Certification (AFO) / Certified Pool Operator (CPO) Ability to routinely bend to lift more than 20 lbs. Ability to work in a stationery position and move about the club for prolonged periods of time Preferred Requirements Trade or Technical School degree Life Time is a place for everyone. As an organization, we are committed to an inclusive, diverse and equitable workplace that respects and celebrates the unique contributions of each individual while ensuring we remain an equal opportunity employer that recruits, hires, trains and promotes based on merit and qualifications.

Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day's activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests' service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver's License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law.

Skanska is searching for a dynamic Temporary Works Design Engineer. This is a great opportunity to start a career with a company that builds things that matter and values its team. We are proud to share our culture of diversity and inclusion. Our work makes a clear contribution to society and the environment around us. We build in many different verticals. (******************************************************** Whether we are building schools to provide inspiring spaces for learning, roads to connect communities, or hospitals to care for patients, it all contributes to our purpose - we build for a better society. Skanska's values -Be Better Together, Act Ethically and Transparently, Commit to Customer, and Care for Life-are deeply engrained in how we work, which is why our values support and drive our D&I efforts. The Temporary Works Design Engineer is involved with the design of municipal infrastructure, highways, railways, transit systems, airports, harbors, bridges, tunnels, building, water supply and sewage treatment facilities. The position reports to the Senior Engineer. The Design Engineer must be a team player and have experience in heavy civil construction. This includes budgeting, organization, implementation, and scheduling of the project. Ensure the project is constructed in a safe, ethical manner and in compliance with all federal, state, and local laws. The Project Management Team can vary greatly depending on the size and complexity of the projects, which in turn will affect the number of responsibilities the Project Engineer will be involved in. **Design Engineer Required Qualifications:** + 2+ years of heavy civil infrastructure industry experience is required + Proficiency in Structural software such as STAAD Pro, RISA or SAP 2000 or Geotechnical software such as CivilTech or PLAXIS and AutoCAD software + 2+ years experience with falsework, formwork, pile templates, temporary works design. + Bachelor of Science in Construction or Engineering or equivalent experience and minimum 5 years prior relevant experience. **Our** Investment (************************************************ **in you:** + We believe that Benefits (********************************************************************** should connect you to the support you need when it matters most, and should help you care for those who matter most. That's why we provide an array of options (including medical, dental, and vision insurance plans), expert guidance, and always-on tools, that are personalized to meet the needs of your reality - to help support you physically, financially, and emotionally through the big milestones and in your everyday life. Please visit the compensation and Benefits (********************************************************************** summary on our careers site for more details. + As a Skanska community, our values ground us, and our diversity of experience propels us forward. No matter what your career stage, there's a place for you to thrive here and partner with us in shaping how our world lives, moves, and connects. + At Skanska, we Care for Life. And we're committed to supporting your whole health and peace of mind through inclusive and personalized total rewards. + We're committed to your success by developing you in your role and supporting your career growth + Compensation and financial well-being (********************************************************************** - Competitive base salary, excellent bonus program, 401k, & Employee ownership program. **Come work with us and join a winning team!** **Background Check Required** Skanska is an Equal Employment Opportunity (EEO) Employer. We do not discriminate on the basis of race, color, religion, sex, national origin, disability, age, genetic information, citizenship, protected veteran status, or any other categories protected under applicable federal, state, and local laws. Skanska Equal Employment Opportunity Skanska uses knowledge & foresight to shape the way people live, work, and connect. More than 135 years in the making, we're one of the world's largest construction and project development companies. With operations in select markets throughout the Nordics, Europe and the United States, global revenue totaled $15.9 billion in 2024. Skanska in the U.S. operates 28 offices across the country, with its headquarters in New York City. In 2024, the U.S. construction sector generated $8.2 billion in revenue, and the U.S. development sector's net investments in commercial projects totaled $224 million. Together with our customers and the collective expertise of our 6,300 teammates in the U.S. and 26,300 globally, we create innovative and sustainable solutions that support healthy living beyond our lifetime. Skanska's Applicant Privacy Policy for California Residents (****************************************************************************************************************** **Search Firm and Employment Agency Disclaimer** _Search Firm and Employment Agency Disclaimer Skanska USA Human Resources ("Skanska HR") provides HR services to the Skanska business units within the U.S.A. including Skanska USA Civil Inc., Skanska USA Building Inc., Skanska USA Commercial Development Inc. and Skanska Infrastructure Development Inc. (collectively "Skanska USA"). As such, Skanska HR is the sole authorized representative of Skanska USA to execute any agreements with search firms, employment agencies or any employment vendor ("Vendor"). As a condition precedent to any entitlement for payment, a Vendor shall have both (1) Skanska USA Placement Agreement, and (2) an Engagement Job Order executed by an authorized Skanska HR representative. Absent the properly executed documents, Skanska HR shall have no obligation to make payment to the Vendor. Verbal or written communications from any employee of Skanska USA business units shall not be considered binding obligations. All resumes whether unsolicited or solicited shall be considered property of Skanska HR._

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: SecretTRAVEL: Yes, 10% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Please note that this opportunity is contingent on program funding. Start dates are determined after funding confirmation. Northrop Grumman Aeronautics Systems has an opening for a Systems Engineer - Mission Effectiveness/Ops Analysis to join our team of qualified, diverse individuals within our Systems Engineering organization. This role is located in Melbourne, FL. In this role, you will support the Systems Engineering Integration (SEI) Integrated Product Team (IPT). Key Responsibilities: The individual will be responsible for operating in an agile team environment to perform the following: Perform modeling, simulation, and analysis to support program development, execution, and related research and development projects Develop mission relevant scenarios; assesses operational effectiveness of existing and/or emerging systems and capabilities in representative operational environments Develop new and/or integrates existing system simulation frameworks, weapon systems components to include air vehicle platform, kinematics, sensors, communications, command & control, weapons, and threat performance models and algorithms. Analyzes and tests next generation tactical assets within an advanced threat environment Develop software to simulate real-time operations and behavior of systems for virtual simulation (man in the loop) testing so that future tactical aircraft can be evaluated in next generation air warfare mission environments. Model operational environments and perform trade studies via computer simulation resulting in recommendations for alternative system architectures and configurations Support the design and development of visualization models and databases for integration with a high fidelity simulation environment used for strategic simulation and training Support evaluations to determine the best frameworks, hardware, capabilities, and tools available to create simulations and experiences that enhance the Virtual Simulation product Ensures performance capabilities of new systems and architectures are traded against cost and mission requirements Communicate across the engineering disciplines and technology areas to integrate capabilities Ability to work independently or in team settings, according to project needs This position requires practical experience and interpretation of modeling and simulation results, algorithms, and formulas and must be able to communicate their significance and relevancy in a clear, detailed manner. We offer flexible work arrangements, 9/80 work schedule with every other Friday off, phenomenal learning opportunities, exposure to a wide variety of projects and customers, and a very friendly team environment. We are looking for self-motivated, proactive, and goal-oriented people to help us grow our services and become even better at what we do. Basic Qualifications: Must have a Bachelor of Science degree in a Science, Technology, Engineering, or Math (STEM) discipline AND 2 years of related professional/military experience OR a Master of Science degree in a STEM discipline AND 0 years of related professional/military experience, OR a STEM Ph.D. AND 0 years of related professional/military experience Your ability to transfer and maintain the final adjudicated government Secret clearance (DoD must be in-scope or enrolled in Continuous Evaluation) and any program access(es) required for the position within a reasonable period of time, as determined by the Company. Must have experience with operations analysis and/or virtual simulation tools (e.g. AFSIM, Brawler, STK, MATLAB) Must have experience with MBSE modeling products (e.g. Cameo) Preferred Qualifications: Experience in at least one programming language (e.g. C++, Python, FORTRAN) Experience collaborating on projects with multiple teams and managing relationships through effective communication. Advanced degree in Engineering, Operations Research, Mathematics, Physics, or Computer Science Experience in weapon system level design, integration, test and evaluation An understanding of Integrated Air Defense Systems and capabilities The ability to translate Physics/Mathematics models into real-time simulation algorithms and models Experience with real time simulation/software development Experience working within an Agile workflow using Atlassian Suite products (i.e. Jira, BitBucket) Proficiency in NGTS, AFSIM, Brawler, and/or FORTRAN Familiarity with Digital Engineering processes Ability to communicate findings and recommendations clearly to both technical and non-technical audiences Active Top Secret Clearance #AS-FA3 Primary Level Salary Range: $77,200.00 - $115,800.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

We have a Mechanical Engineer position open in Orlando, FL. This position is responsible for mechanical engineering on large-scale projects. Project requirements involving mechanical system design from scratch, analysis/calculations (stress/fatigue/etc.), acceleration forces, load calculations, material stress design, failure and effects analysis, risk assessment, component selection, and mechanical system installation/commissioning. RESPONSIBILITIES: Must be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters Designs, develops, and implements fully integrated mechanical assembly systems to meet process requirements. As well as complying with any local or government agency design/implementation codes Knowledge of analyzing system design for Hazard analysis development and mitigation Understanding of Class 1 parts in order to minimize their need and optimize redundancy minimizing single points of failure Develops documents of system configuration and design. Documents include Theory/Description of operation, Detailed mechanical system design description, system implementation/acceptance test plans, system routine maintenance/job plans Develops drawings of mechanical design, assemblies, and installation procedures on AutoCAD and/or SolidWorks software Ability to design and troubleshoot pneumatic and hydraulic control systems Ability to perform system analysis/calculations including Stress, fatigue, reliability, life expectancy, tolerance studies Knowledge of ride system design requirements for attractions involving guest accelerations, reach envelope, ingress/egress, weight, and emergency evacuation analysis and implementation upon control system failure in worst-case scenarios Will assist with the initial start-up and debugging of integrated systems and the development of system documentation Individual will be working on system integration projects for clients in industries such as entertainment and manufacturing Will act as technical lead on projects and guide lower-level engineers, technicians, and contractors Will act as Project Manager on smaller projects ranging from $50k to $250k. This includes but is not limited to: Develops and executes implementation plans for the project Assigns work to meet overall project deadlines Ensures that all project team members clearly understand the scope of W-M responsibilities Develops schedules for W-M and customer requirements Evaluates progress on project(s) and details changes Responsible for all purchasing and subcontractor requirements Responsible for the development of costs and proposal of change orders to contract scope Qualifications QUALIFICATIONS: Education - Bachelor's Degree in Mechanical Engineering. Experience - 5+ years in the following areas is preferred: An in-depth understanding of mechanical systems, components, stress analysis, acceleration forces, and knowledge of amusement ride safety standards (ASTM Standards). Experience with AutoCAD and SolidWorks is also desired Key Competencies - Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings. Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving Skills - All employees are required to be proficient in the use of Microsoft Windows and Office environments TRAVEL: Ability to travel up to 35% PHYSICAL DEMANDS OF POSITION: Seeing, color perception, hearing, listening, clear speech, dexterity in hands, driving, lifting, climbing, ability to mount and dismount equipment, pushing, and pulling. WORKING ENVIRONMENT/CONDITIONS: Standard office environment, On-site office environment, and diverse industrial environments. Frequent PC usage, fax machines, copy machines, and phones. Additional Information All your information will be kept confidential according to EEO guidelines.

What you do at AMD changes everything We care deeply about transforming lives with AMD technology to enrich our industry, our communities and the world. Our mission is to build great products that accelerate next-generation computing experiences - the building blocks for the data center, artificial intelligence, PCs, gaming and embedded. Underpinning our mission is the AMD culture. We push the limits of innovation to solve the world's most important challenges. We strive for execution excellence, while being direct, humble, collaborative and inclusive of diverse perspectives. This is who we are at our best. One Company. One Team. AMD together we advance_ GPU Ray Tracing Architect (Senior Engineer) THE ROLE: As a GPU Ray Tracing Architect, you will be working on exciting projects with the very best and most passionate GPU team in the world to create powerful new products that enable our customers, partners, and developers to tackle their computing and visualization needs efficiently and creatively. You will work in a hardware/software codesign environment to craft an industry leading ray tracing solution with algorithms and their implementations in hardware. THE PERSON: A self-motivated graphics enthusiast and effective team player who focuses on collaboration, team building, mentoring, and furthering team and company success. The ideal candidate is a highly skilled software designer and engineer, strong in 3D math, proficient in C and C++ and the efficient use of discrete GPUs, APUs, and CPUs. You are team oriented and are driven by difficult challenges. KEY RESPONSIBILITIES: Work with a team of engineers and architects to explore new ray tracing technologies in real-time and offline applications Implement new features related to ray tracing to advance AMD's HW/SW solutions Analyze and model ray tracing solutions to identify performance limiters in hardware and software on both silicon hardware and pre-silicon GPUs Improve ray tracing performance on current and future hardware Collaborate with engineers and managers on multiple sites. Identify complex technical relationships and problems, break them down, summarize multiple possible solutions, and help the team make advances in Performance, Power, and silicon Area (PPA). PREFERRED EXPERIENCE: Experience in ray/path-tracing hardware acceleration and software algorithms Excellent analytical and problem-solving skills along with attention to details GCN / RDNA graphics architecture experience Experience with DirectX 12, Vulkan graphics APIs and/or CUDA or OpenCL APIs Knowledge/Experience in GPU programming/design Hardware modeling skills in C/C++ (GPGPU Sim or Multi-sim a plus) ACADEMIC CREDENTIALS: Masters, PhD or 5 years industry experience in relevant field (EE, CS, CE) LOCATION: Santa Clara, CA - Orlando, FL #LI-PH1 Requisition Number: 148521 Country: United States State: Florida City: Orlando Job Function: Design Benefits offered are described here. AMD does not accept unsolicited resumes from headhunters, recruitment agencies or fee based recruitment services. AMD and its subsidiaries are equal opportunity employers. We consider candidates regardless of age, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third party affiliation, sex, pregnancy, sexual orientation, gender identity, military or veteran status. Please click here for more information.

About the Role Florida Orlando Remote vs. Office Hybrid (Remote/Office) Company Siemens Energy, Inc. Organization Gas Services Business Unit Central Full / Part time Full-time Experience Level Experienced Professional A Snapshot of Your Day As part of Service Engineering, leading technical clarification support for Gas Turbine components. Technical support includes ownership of risk assessments for hot side parts in operation of gas turbines and provide direction to our commercial teams for outage preparation. How You'll Make an Impact * Assess the degradation of turbine hardware and communicate risk back to field service and commercial teams. * Review findings with customers to explain operational risks based on part condition. * Document component damage and feedback service experience to design engineering. * Review outage plans and scope for component hardware installed in unit and provide recommendations for exchange of hardware. * Direct impact on Service business success by improving customers' ability improve engine reliability. * Perform Root Cause Analysis (RCA's) on components when they don't meet life expectancy. * Provide technical support for manufacturing product and process deviations. * Manage Risk Database. Review current risks and compare them with findings within fleet and recommend updates. * Review current status of part life and coordinate life assessments to update part life model. Communicate these updates to affected teams. * Interfaces include, but are not limited to, Manufacturing, Field Service, Procurement, LTP, Open Market, Fleet, Design Engineering, Internal and External Customers. What You Bring * Bachelor's Degree in Mechanical Engineering, Aerospace Engineering, Materials Engineering or related. 10+ years of technical experience; strong technical approach. * Proficient at collaborating with diverse groups. Ability to effectively work with customers and manufacturing shops. * Strong problem-solving and interpersonal skills. * Experience in gas turbine components, preferred hot side GT components. * Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. Your opportunities for personal growth * Gain in-depth Manufacturing experience on repair processes. * Grow network in Gas Services Engineering and Manufacturing Organizations. * Develop or strengthen project management skills. * Potential for direct external customer interaction! About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: ******************************************** Rewards * Career growth and development opportunities; supportive work culture * Company paid Health and wellness benefits * Paid Time Off and paid holidays * 401K savings plan with company match * Family building benefits * Parental leave ************************************ Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more.

It all started in sunny San Diego, California in 2004 when a visionary engineer, Fred Luddy, saw the potential to transform how we work. Fast forward to today - ServiceNow stands as a global market leader, bringing innovative AI-enhanced technology to over 8,100 customers, including 85% of the Fortune 500 . Our intelligent cloud-based platform seamlessly connects people, systems, and processes to empower organizations to find smarter, faster, and better ways to work. But this is just the beginning of our journey. Join us as we pursue our purpose to make the world work better for everyone. **This is a Flexible position based in our Orlando, Florida office. ** **Our Flexible work persona requires a minimum of 2 days per week in the office.** **In addition, this position requires shifts that cover weekend days.** **Please Note:** This position will include supporting our US Public Sector customers. _"This position requires passing a ServiceNow background screening, USFedPASS (US Federal Personnel Authorization Screening Standards). This includes a credit check, criminal/misdemeanor check and taking a drug test. Any employment is contingent upon passing the screening. _ **_Due to Federal requirements, only US citizens, US naturalized citizens or US Permanent Residents, holding a green card, will be considered._** The ServiceNow PSE (Production Service Engineering) team is a group of highly technical engineers who are tasked with maintaining and supporting the reliability, scalability and performance of the automations and platform to manage the ServiceNow cloud infrastructure. Our engineers are empowered to drive technical resolutions across the technology stack of the cloud infrastructure and instance automations. They are also tasked with driving forward the operability and reliability of the automations to drive down the number of incidents and to reduce MTTR. To accomplish this our engineers, combine solid analysis and troubleshooting skills, software development, networking and systems engineering expertise with a strong desire to be challenged by problems of scale and complexity and to make services better for our customers. **What you get to do in this role:** + Investigate, Support and Provide sustainable resolution to issues within our cloud infrastructure and application stack. + Use your experience in software development, systems engineering and networking to proactively prevent repeatable issues. + Drive initiatives with partner teams to improve the reliability and performance of the cloud infrastructure through improved system design. + Drive a culture of intolerance to manual activity which results in a highly automated environment delivering scalable solutions. + Mentor and Coach other team members. **Important Note on the Role:** + Availability for weekend shifts: Must be able to work weekends, with corresponding days off during the week. + Willing to work 4 x 10 or 5 x 8 including weekends. + Required to be on-call as needed. **To be successful in this role you have:** + Experience in leveraging or critically thinking about how to integrate AI into work processes, decision-making, or problem-solving. This may include using AI-powered tools, automating workflows, analyzing AI-driven insights, or exploring AI's potential impact on the function or industry. + 8+ years of experience with a Bachelor's degree or 6+ years of experience with a Master's degree in enterprise technical systems support, operations and development. + Expert knowledge of Linux systems. + Coding in one or more of these languages - JavaScript, Python, Java and Bash. + Understanding of Networking services and protocols - Routing, Load Balancing, DNS, SNMP, HTTPS, TCP/IP, etc. + Working knowledge in one or more of the databases - Postgres, MySQL, Maria DB, Oracle. + Web application / API development and operations experience. + Experience in using Splunk for analysis and reporting. + Strong troubleshooting, analysis and problem-solving skills. + Agile methodologies and software development lifecycle experience. + Familiarity with Cloud Technologies - AWS, Azure, GCP or OpenStack. + Metric-driven mindset. + Engage with customers and partners to drive resolutions and efficiency. + Good knowledge of Observability and Monitoring **Nice to Have:** + Experience working with Container and Container Orchestration Platforms (Docker, Kubernetes). + Experience developing on the ServiceNow Platform + Knowledge in nginx, Kafka, Grafana, Prometheus. + Knowledge in Ansible, Puppet, Terraform. **Soft Skills: ** + Self-motivated and having a customer support mindset. + Team-first attitude and uncompromising attention to detail. + Strong leadership and mentoring capabilities, with experience guiding cross-functional teams. + Excellent communication and problem-solving skills, with the ability to explain technical concepts to non-technical stakeholders. + Passion for innovation and improving AI-driven user experiences **Work Personas** We approach our distributed world of work with flexibility and trust. Work personas (flexible, remote, or required in office) are categories that are assigned to ServiceNow employees depending on the nature of their work and their assigned work location. Learn more here (************************************************************************************************************************************* . To determine eligibility for a work persona, ServiceNow may confirm the distance between your primary residence and the closest ServiceNow office using a third-party service. **Equal Opportunity Employer** ServiceNow is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex, sexual orientation, national origin or nationality, ancestry, age, disability, gender identity or expression, marital status, veteran status, or any other category protected by law. In addition, all qualified applicants with arrest or conviction records will be considered for employment in accordance with legal requirements. **Accommodations** We strive to create an accessible and inclusive experience for all candidates. If you require a reasonable accommodation to complete any part of the application process, or are unable to use this online application and need an alternative method to apply, please contact ***************************** for assistance. **Export Control Regulations** For positions requiring access to controlled technology subject to export control regulations, including the U.S. Export Administration Regulations (EAR), ServiceNow may be required to obtain export control approval from government authorities for certain individuals. All employment is contingent upon ServiceNow obtaining any export license or other approval that may be required by relevant export control authorities. From Fortune. ©2025 Fortune Media IP Limited. All rights reserved. Used under license.

Description: Boat Company With over 100 years of excellence, Nautique Boat Company, a subsidiary of Correct Craft, is recognized globally for building the world's finest ski and wake boats. Since 1925, we've led the marine industry through innovation, superior craftsmanship, and a dedication to quality. Beyond our boats, we're driven by purpose. Through Nautique Cares, we contribute to causes both locally and around the globe improving that performance, people, and philanthropy go hand-in-hand. Learn more at ***************** Job Description: The CAD Engineer II plays a key role in developing and managing 3D CAD models and technical drawings that support product design, engineering, and manufacturing processes. This mid-level role emphasizes 3D modeling as a primary responsibility, ensuring accurate, functional digital representations of parts, assemblies, and systems. Working with moderate supervision, CAD Engineer II transforms rough design concepts into complete and detailed CAD deliverables, while coordinating closely with engineering and design teams to ensure quality and compliance with specifications. Key Responsibilities: Utilize CAD software to create 2D and 3D models using SolidWorks or similar CAD software. Collaborate with more senior engineering and project managers to understand the design requirements. Ensure compliance with relevant regulations, standards, and company policies throughout the design process. Works on projects of moderate to high complexity with support. Generate engineering models, drawings, and bills of materials for new designs under direction. Interpret engineering sketches, layouts, and verbal instructions to produce accurate CAD outputs. Maintain organized project files and documentation for easy access and review. Approve mechanical models and drawings for release. Creates 3D models for tooling. Resolve discrepancies between design intent, markups, and final deliverables. Assist in the development and design of composite parts and molds. Generate engineering change notices as required. Evaluate vendor-supplied items for their suitability regarding fit, finish, and performance. Gain exposure to some of the more complex tasks within the job function. Complete other functions assigned by supervisor. Skills and Abilities: Proficiency in CAD software, particularly SolidWorks. Strong understanding of mechanical design principles and materials. Ability to create and interpret technical drawings and specifications for productions product requests. Strong interpersonal, written, and verbal communication skills with the ability to work closely with all members of the organization. Demonstrated organization and project management skills. Strong analytical and conceptual thinking skills. Problem-solving skills and willingness to take initiative for decisions. Ability to juggle and manage competing tasks and demands and deal with frequent changes, delays, or unexpected events. Requirements: Knowledge, Education, and/or Experience Required: BS in Mechanical Engineering or related technical field. Demonstrated proficiency in 3D CAD Modeling experience, preferably SolidWorks and NX. 2 to 4 years of CAD experience within a manufacturing environment. Understanding of engineering principles and design practices. Desire to work in a “hands-on” environment. Knowledge, Education, and/or Experience Preferred Experience in the marine industry. Experience with the development of composite parts. Knowledge of composite molding process. Experience with technical drawings and documentation. Ability to trailer a boat and operate. Physical Demands Must be able to work in a non-climate-controlled environment where ambient air temperature can exceed outside air temperature occasionally. Must be able to bend at the waist and knees and stand for extended periods of time. Must be able to lift 25 pounds when necessary. This is a safety-sensitive position. Additional Requirements: Must be a licensed driver with a good driving record (subject to MVR). Americans with Disability Specifications The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be exposed to weather conditions, a normal office environment, or a factory environment that is not climate controlled. The noise level in the work environment is usually moderate. The factory in certain areas maintains a high fiberglass and dust environment. Personal Protective Equipment might be required in certain areas of the factory including but not limited to safety glasses, respirators, hearing protection, gloves, and protective garments. Employees in safety-sensitive positions must report to work fit for duty and must remain fit for duty throughout their workday. To be fit for duty, the employee must not be impaired by alcohol, illicit drugs, or medication. Equal Employment Opportunity Employer Nautique Boat Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Nautique Boat Company complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Nautique Boat Company expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of Nautique Boat Company's employees to perform their job duties may result in discipline up to and including discharge.