Operator jobs in Cincinnati, OH

Launch Your Career with ConGlobal ConGlobal is hiring immediately for a key role in our global supply chain operations. Whether you're looking to grow your career or gain new skills, this role offers paid training, competitive pay, excellent benefits, and long-term advancement opportunities. 📍 Location: 3155 E. Sharon Road Sharonville, Ohio 45241 United States 💲 Starting Pay: Apprentice (No Experience): $18.96/hour Journeyman (With Experience): $21.06/hour 🕐 Status: Full-Time | Immediate Hire 🕔 Schedule: Open availability required, including all shifts, weekends, and holidays. 🚗 IMPORTANT: A VALID DRIVER'S LICENSE IS REQUIRED FOR THIS POSITION 🚗 Applications without a valid driver's license will not be considered. Responsibilities: About the Role: As an Intermodal Equipment Operator (also known as a Terminal Operator), you'll play a critical role in the safe and efficient movement of shipping containers within our intermodal yard. You'll operate specialized equipment-such as hostlers, cranes, top loaders, and side loaders-to load, unload, and relocate containers as part of our daily logistics operations. Your work ensures containers are handled accurately and safely, keeping freight moving on time. Key Responsibilities: Operate heavy equipment to load and unload shipping containers from railcars and trucks. Drive hostlers to position containers and chassis within the yard. Use top loaders, side loaders, and/or cranes to stack, move, and organize containers. Perform equipment inspections before and after use to ensure operational safety. Communicate with yard personnel and supervisors to coordinate moves and tasks. Maintain a safe work environment by following established protocols and procedures. Qualifications: Previous experience operating heavy equipment or machinery in a logistics or industrial environment preferred Strong commitment to safety and attention to detail. Ability to work outdoors in all weather conditions and perform physically demanding tasks. Willingness to work flexible schedules, including weekends and holidays. Basic communication skills and ability to work as part of a team. Ability to lift up to 50lbs Ability to climb ladders and stairs both off and on railcars Valid driver's license Must pass a pre-employment background verification, physical and drug screening The Federal Rail Administration sets and enforces safety regulations and standards for railroad operations. Use of cannabis is strictly prohibited. If applicable for the position you are applying to, and if you are offered the position, you will have to take and pass a drug screen. Open availability Preferred Qualifications: Experience in intermodal or rail yard operations. Familiarity with container handling equipment such as hostlers, top loaders, or cranes. CDL or equipment certifications a plus, but not required. We offer competitive pay, medical/dental/vision benefits, 401(k), paid training, career advancement and more.

Under minimal supervision, the CNC Operator operates laser machines to process parts according to blueprint specifications. This role follows established operating procedures while maintaining safety, quality, and production standards. Responsibilities Operate multiple CNC laser machines. Perform first-piece and in-process quality inspections. Maintain tooling, equipment, and supplies. Complete required daily production, quality, and SPC documentation. Follow all safety procedures and comply with quality policies, specifications, and work instructions. Qualifications High School Diploma or GED required. 0-3 years of CNC machine operating experience preferred. Strong attention to detail and verbal communication skills. Working knowledge of basic inspection tools such as micrometers, calipers, and gauges. Physical Requirements & Work Environment Frequent sitting, standing, walking, and use of hands for grasping and gripping. Occasional lifting, carrying, pushing, and pulling of up to 25 lbs. Work performed in a manufacturing environment with moderate noise levels. Schedule 2nd Shift: Monday - Thursday, 3:30 PM - 2:00 AM Pay Details: $21.00 to $25.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

About Us At Quaker Houghton, we are experts in the development, production and application of industrial process fluids, lubricants and coatings for the manufacturing industry. We have been an integral part in the growth of the world s largest industrial and manufacturing companies from aerospace and automotive to primary metal and energy. Today, we have a global presence, with our corporate headquarters located in Conshohocken, PA. Quaker Houghton is a global publicly traded company with a unique collaborative culture that supports career growth for its colleagues and offers competitive compensation and benefit programs. Job Summary Responsible for following manufacturing instructions to perform production and shipping related duties to ensure on-time production and shipment of product while adhering to high standards of quality, safety and customer service. What will you do? Operates production equipment in a manner consistent with training and work instructions to ensure safety and the highest level of product quality. Prepares mixing vessels, necessary pumps and hoses for unloading. Inspects all containers prior to filling for cleanliness and integrity. Fills containers as prescribed in the associated batch ticket, pick ticket, and or export order sheet and prepares containers for shipment including labelling, palletizing and wrapping and completes work orders in JDE. Maintains neat, thorough and correct completion of all batch related documentation. Calculates batch yields and responds appropriately. Store and stage inventory in assigned areas for batch preparation, further processing and/or shipping. Assist in tracking material inventory and performing inventory counts, make inventory transfers in JDE. Loads and unloads box trucks and flat-beds, tanker trucks and rail cars, either manually or using proper material handling equipment. Load containerized and bulk raw materials to production vessels. Complete shipping responsibilities including; receive PO s in JDE, ship items in JDE, communicate late shipments to OTC group, Prepare UPS and FedEx shipments and call trucks for shipment. Maintains a clean and organized work area and strictly adheres to all plant safety policies. Provides immediate containment, reporting and clean-up/recovery of spilled material or leaks. Operates all types of Forklifts and other related motorized vehicles in a safe and proficient manner. Holds team members accountable for safety and quality procedures. Routinely participate in site safety committee. Assists in the investigation and resolution of customer complaints. Others duties as assigned; Responsibilities may vary by work location Work Environment/EHS/Physical Demands: Will work in a manufacturing environment and may be exposed to fumes or airborne particles and toxic or caustic chemicals. The associate is exposed to moving mechanical parts, risk of electrical shock and trip and slip hazards. The noise level in the manufacturing environment is loud. Ability to lift bags and other containers up to 50 pounds in a safe manner as directed. Ability to move drums up to 500 pounds with mechanical equipment in a safe manner as directed. May be required to stand for long periods and walk great distances daily. May be required to work in small spaces and high locations. What do we look for? High school diploma or equivalent preferred. This position is the entry level for a new production employee with 0-1 year of experience. 1-2 years of manufacturing experience preferred. Ability to read, analyze and interpret batch sheets, SOPs and work instructions Positive team oriented attitude Reliable attendance Demonstrate basic mathematical skills. Precise and accurate in dealing with figures and details. What's in it for you? $1,500 Sign on Bonus Company Provided Uniforms Competitive bi-weekly pay Generous annual paid time off. 401 (k) employer match. Health care, dental and vision benefits. Employees can receive up to a $1,000 bonus by referring a friend to join the company. Safety is a top priority at Quaker Houghton. All operators receive extensive on-the-job training during the first 3 months of employment. Tuition Reimbursement Quaker Houghton is an equal opportunity employer committed to creating a diverse workforce. Quaker Houghton provides equal employment opportunity for all qualified candidates. Quaker Houghton does not discriminate against any candidate for employment based on race, color, religion, sex, gender, gender identity or expression, affectional or sexual orientation, pregnancy, age, creed, ancestry, national origin, citizenship, marital or domestic partnership or civil union status, veteran s status, physical/mental disability, genetic information, or any other category protected by U.S federal, state, and/or local employment law. Furthermore, Quaker Houghton is committed to providing reasonable accommodations to qualified candidates with physical and/or mental disabilities. Applicants with a disability who need assistance applying for a position may email ************************ .

Excavator Operator Founded in 1935, Roto-Rooter is North America's largest plumbing, drain cleaning, and water cleanup services provider. Roto-Rooter operates businesses in over 100 company-owned branches, independent contractor territories, and approximately 400 independent franchise operations, serving approximately 90% of the U.S. population and parts of Canada. If job security, top pay, excellent benefits, and career advancement representing a well-known national brand are what you're looking for, Roto-Rooter is the company for you. We pride ourselves on being a great place to work, providing excellent pay, flexible work schedules and top benefits. We are growing and have an excellent opportunity for a Skilled Heavy Equipment Operator, especially backhoe and/mini excavator for sewer & water service repairs/replacements. Responsibilities Operates back-hoe, mini-excavator, skid steers, and/or other excavation machinery equipped with scoops, shovels, or buckets to excavate and load loose materials on residential and commercial job sites. Load, unload and secure equipment on transport trailers according to guidelines. Follow OSHA and Roto-Rooter safety procedures. Work collaboratively with a crew to efficiently complete excavation work on various projects. Interact with customers as needed, providing excellent customer service and addressing their requirements professionally. Maintain excavation equipment and gather all necessary equipment from the branch and/or rental companies to ensure smooth operations during excavation tasks. Perform excavation work in confined spaces and open trenches, adhering to safety protocols and guidelines. Locate and arrive at job sites promptly, ensuring safe driving and operation of service vehicles between locations. Requirements Essential requirement: Construction experience in both residential and commercial projects. Mandatory requirement: Possession of a current CDL Class A license for this position. Trenchless water, sewer & gas experience is a plus. Ability to work a flexible schedule, including nights and weekends, as required for the role. Complete jobs within specified timelines. Benefits At Roto-Rooter we believe our greatest investment is in our employees. We prioritize the health and well-being of our team and their families. That's why we offer an extensive employee benefit package including: Medical insurance with a Prescription Drug Card Accident and Critical Illness Insurance Dental Insurance Vision Insurance Paid Vacation Paid Training Life Insurance Matching 401K Retirement Savings Plan Tuition Reimbursement Profit Sharing Roto-Rooter offers excellent career paths for military veterans and personnel transitioning to civilian professions. Throughout our 86 years in business, we've found that military training and structure are a great fit at our company. EEO Statement We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, religion, color, sex, gender, age, national origin, veteran status, military status, disability, gender identity, sexual orientation, genetic information, or any other characteristic protected by law. Advertising Tags IND34 #LI-ONSITE Not ready to apply? Connect with us for general consideration.

Job Description Gregory Construction is an industry-recognized, award winning provider of construction services driven by a commitment to continuous improvements. Our portfolio includes numerous successful projects from various markets including civil, industrial, and commercial with our core of complex concrete solutions in each of these areas. Our quality construction services have benefited many customers throughout the past decade including universities, local municipalities, the Department of Transportation, and varying clients in the commercial and industrial industries. We strive to provide a friendly work environment that encourages productivity and a sense of pride while promoting teamwork on every level. We are looking for Heavy Equipment Operators to join our team in New Carlisle, Indiana. We are looking for someone that has a “CAN DO” attitude who will work with his/her team to perform the following and more: Load and move dirt, rocks, equipment, or other materials, using trucks, power cranes, shovels, or related equipment. Operate machines to spread, smooth, level materials on road beds or other job sites as needed. Observe grade in order to adjust machine settings and indicate. Conduct documented pre-shift inspections of equipment for safety and mechanical defects. Work flexible hours including nights, weekends, and work outside for extended periods during all seasons of the year. Coordinate machine actions in response to hand or audio signals from crew members. Inspect, clean, maintain, and repair equipment, using mechanics' hand tools Know and follow safety regulations. Perform necessary work while complying with all company policies and procedures. Perform additional duties as required or directed by their immediate supervisor or other manager. Experience: 5 years (Required) in the civil construction industry 5 year (Required) verifiable experience in equipment operations Requirements: Driver's License Must be able to pass pre-employment screening (including but not limited to drug screen and background check) This full time position will include paid time off, health insurance, dental insurance and a company matched 401K as well as other perks. Gregory Construction is committed to the success of their clients and employees so additional training and education is available and encouraged. Powered by JazzHR KT1TPiLDmq

If you've got a passion for heavy equipment, loved tonka toys as a kid, enjoy time outdoors, & get gratification working with a team to build a better environment for the next generation, Levy invites you to play in our sandbox. The Levy Group of Companies is seeking Heavy Equipment Operators to work at our Levy Gallatin Mill Services location in Ghent, KY. The Heavy Equipment Operators perform all functions as it pertains to operating heavy off-road mobile equipment. Pay: $20-$30/hr; plus $2/hr shift differential on nights Shift: Rotating Schedule - 4 on/4 off; 12-hour shifts, 1 week of days, 1 week of afternoons, 1 week of nights Benefits Competitive benefits package including Medical, Dental, Prescription, 401(K) with 3% Employer Contribution, Long- and Short-term Disability Year round, non-weather dependent employment Tuition Reimbursement for qualified skilled trade programs Student Loan Repayment Program Employee Referral Program Responsibilities The Heavy Mobile Equipment Operator will: Operate various heavy mobile equipment such as: Water Trucks, 988K Front End Loaders, Excavators, 777 Haul Trucks, D8/9 Dozers, Pot Haulers, & Sennebogen Cranes Comply with all safety regulations, policies, and record-keeping Load materials in designated areas Maintain work area to allow safe movement and access Monitor any change in machine performance to identify potential malfunctions & report to the maintenance department Perform daily machine inspection and routine greasing, oiling, and fueling Meet customer service expectations Skills The ideal candidate will have: Experience operating end loader, excavator, dozer, and other specialized mobile equipment A team and safety oriented mentality Ability to lift up to 50lbs Basic Mechanical aptitude. Knowledge of bulk materials Good verbal and written communication skills. Willingness to perform other duties as assigned. High school diploma or equivalent To Apply Please submit your resume. Military Members are welcome and Veterans are encouraged to apply! Who is Edw. C. Levy Group of Companies? We are a unique, 100-year-old family-owned company that transforms our recycled products into construction materials, lightweight aggregates, asphalt, cement, concrete, agricultural products, and more. We provide steel mill services, flame cutting and treatment, road building, logistics, laboratory testing, and a variety of other solutions for our customers. The Levy Group of Companies is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, veteran status or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. The Levy Group of Companies makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job DescriptionSalary: $30.00 - $33.00 We are currently accepting applications for Heavy Equipment Operators for the Cincinnati, OH, area. This is a great opportunity to get hired on through a very well-known, respected company. LOCAL EXPERIENCED DOZER, TRACKHOE & LONG REACH OPERATORS NEEDED TRIMBLE EXPEREINCE preferred. MUST BE OSHA 10 CERTIFIED COMPETITIVE WAGES PAID WEEKLY BENEFITS OFFERED INCLUDE Health, Dental, Life and Vision Insurance PTO PAID VACATION FULL TIME 5-7 DAYS A WEEK 8-14 HOUR DAYS Required skills and experience: 3 plus years' experience with heavy equipment operations. This positions main responsibility is operating excavation equipment. Preference will be given to those with other equipment operating experience, in: Compactor, Excavators, Dozer, Long Reach etc. Essential Functions Operate heavy equipment on rough grade work and grade to specifications in and around jobsite. May operate/maintain off road trucks to facilitate hauling, delivery and/or relocation of materials such as sand, gravel and crushed rock. Strong attention to detail and ability to keep excavator/equipment clean and in operating order. Perform Multi-Functions when not operating equipment. Competencies: Ability to follow OSHA safety guidelines as well as those set forth by company policy. Ability to follow instructions of supervisor in order to adhere to job specs, company policies and safety guidelines. Dependable, reliable, fulfilling responsibilities, working independently and as a team striving for excellence with a strong work ethic. Conduct and behavior exemplifying company and industry standards. Required job knowledge, skills and abilities will be discussed at the time of interview. We provide a drug-free workplace to protect the health and safety of our employees and patrons. Employment is contingent upon successfully passing a pre-employment drug screen.

Job Description IronRoad is conducting a confidential search for a 2nd Shift Live Tool Lathe Operator for our Fairfield, Ohio client. We are looking for someone with a great vibe who comes to work and takes care of business. Detail oriented, focused and wants to be part of a great team. Sound like what you are looking for? Contact us! Hours: Monday - Thursday 5:00 p.m. - 3:00 a.m. Pay Range: $20.00 - $35.00+ per hour based on your skill & experience. Determined by Hiring Manager Shift Differential - $2.00 per hour for 2nd shift Location: Fairfield Ohio 45014 Job type: Full time General Description: The Live Tool CNC Lathe Operator is responsible for the setup, operation, and maintenance of Doosan CNC lathes equipped with live tooling and Fanuc controls to produce precision-machined components. This position plays a critical role in maintaining part quality, machine performance, and overall productivity on the second shift. Candidates must demonstrate a strong understanding of multi-axis turning operations, blueprint reading, tool setups, and in-process inspection techniques. The ideal candidate will be a self-starter who can work independently, troubleshoot minor issues, and contribute to a team-focused manufacturing environment. Reports to: Production Supervisor Responsibilities: • Set up and operate Doosan CNC lathes with live tooling, Y-axis functionality, and Fanuc controls. • Read and interpret engineering drawings, blueprints, and GD&T to ensure machining to spec. • Perform tool changes, set offsets, and make minor G-code edits to maintain tolerances. • Conduct part inspections using precision measuring tools (micrometers, calipers, height gauges, indicators, etc.). • Monitor machine performance and adjust machining parameters for efficiency and tool life. • Ensure parts meet quality and dimensional standards throughout production runs. • Complete required documentation including job travelers, inspection sheets, and production logs. • Collaborate with programming, engineering, and quality teams for troubleshooting and process improvements. • Maintain a clean, safe, and organized work area in accordance with 5S and company safety standards. Qualifications • High school diploma or equivalent required; technical training or machining certificate preferred. • Proficiency in blueprint reading and using standard inspection tools. • Familiarity with G-code programming and ability to make minor edits and offsets at the machine. • Strong understanding of speeds, feeds, cutting tools, and basic machining principles. • Ability to work independently with minimal supervision on second shift. Preferred Qualifications • Minimum 2 years of experience operating CNC lathes, preferably Doosan with Fanuc controls and live tooling. • Experience operating lathes with sub-spindles and Y-axis features. • Background in high-mix, low-volume production environments. • Familiarity with ISO 9001 or AS9100 standards and quality control procedures. • Forklift or overhead crane experience/certification a plus. Physical Requirements • Ability to stand for long periods, lift-up to 50 lbs., and handle repetitive tasks. • Manual dexterity and visual acuity required for precision measurements and fine detail work. Shift & Compensation • Second Shift: • Shift differential may apply • Competitive hourly wage based on experience • Overtime opportunities available Benefits • Health, dental, and vision insurance • 401(k) with company match • Paid holidays and PTO • Training and advancement opportunities Questions: Are you authorized to work in the USA? Do you have reliable transportation to get to and from work? Do you have your high school diploma or equivalent technical training or machining certificate? Required Are you Proficient in blueprint reading and using standard inspection tools? Have you used G-code programming and can you make minor edits and offsets at the machine? Do you have a Strong understanding of speeds, feeds, cutting tools, and basic machining principles? Can you work independently with minimal supervision on second shift?

Heavy Equipment Operator Job Description Summary: Operates various pieces of heavy equipment (graders, dozers, scrapers, excavators, etc.) to move, level, and distribute earth and to push trees and rocks from land preparatory to constructing roads and buildings. Essential Duties and Responsibilities: Operates assigned equipment safely and efficiently, which could include driving a company vehicle. Performs daily maintenance checks of machinery for fluids, grease, etc. Ability to be fluid/smooth with the machine controls to cut ditches, slopes, grades, clear brush, shape and dress slopes and other earthmoving activities. Maintain grade by either communicating with a grade checker, using machine mounted lasers, or by use on machine mounted GPS as well as without the use of GPS. Ability to setup, set, and take down rotating laser equipment/base station. Must be able to read grade stakes, perform arithmetic, use scale ruler or other basic functions used to determine grade and read blue prints/plans. Must be able to endure a high production environment for extended periods of time. Must be able to operate in tight, congested work areas with multiple other activities occurring immediately around the machine. Understands weight distribution affects stability; rated operating capacity. Understands the importance of safety, efficiency and productivity. Works efficiently with others on his/her crew. Other duties may be assigned Skills/Qualifications: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Ability to read and interpret maps, sketches, drawings, specifications and technical manuals Understands and follows oral and written instructions Works independently in the absence of supervision The ability to work 55 - 60 hours a week including Saturdays. Physical Demands: While performing the duties of this job with or without reasonable accommodation, the employee must have the ability to stand; walk; sit; stoop, kneel, crouch, or crawl for long periods. Must be able to handle and manipulate objects on a repetitive basis. Ability to talk and see well to distinguish between back up alarms, voices, and other normal sounds consistent with construction job sites . The employee is occasionally required to taste or smell. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment: While performing the duties of this job with or without reasonable accommodations, the employee is regularly exposed to moving mechanical parts, fumes, airborne particles, outside weather conditions, and vibrations. The employee is frequently exposed to wet and/or humid conditions as well as heat. The employee is occasionally exposed to high, precarious places. The noise level in the work environment is usually loud.

Rumpke is a family-owned and operated company that ranks as one of the largest firms in the waste and recycling industry. Our mission is simple: to deliver exceptional waste and recycling solutions to our customers and communities through a commitment to safety, service, the environment and the growth of our people. When you join Rumpke, you'll be part of a team providing essential services to millions of residents, businesses, and neighborhoods. You will enjoy competitive pay and comprehensive benefits, including health, dental, vision, matching 401(k), life insurance, paid vacation, and more. This is your opportunity to make a difference for you and your family. Come join our team! Heavy Equipment Operators are responsible for safely operating various heavy equipment that perform the spreading, compaction, and/or loading of commercial and residential Municipal Solid Waste (MSW) or recyclable materials. Schedule: Monday-Friday & every other Saturday 5pm-5am Responsibilities of Position: Perform efficient safe operation of all heavy equipment including, but not limited to, bulldozers, graders, excavators, backhoes, front end loaders, wheel loaders, off road dump trucks, and other equipment as required Conduct pre-trip/post-trip inspections on heavy equipment and complete necessary documentation Perform routine maintenance on equipment, (i.e., lubricating, fueling, and cleaning equipment) Operate various equipment for general site preparation, landscaping, snow removal, and/or related assignments Continuously monitor the equipment to ensure proper operation and minimal down time, while also remaining aware of surroundings Interact with internal and external customers Clean waste from equipment body, cab, and wheels throughout the day Performing on-site Roll Off work to switch trash compactors as needed based on locations Operating the yard tractor on site to move and stage trailers as needed based on locations *Specific to Boyd County - Hazardous waste management to safely move waste materials in a manner that does not damage the tanks/containers they are held in or endanger personnel or equipment Perform other duties as assigned Supervisory Responsibility: This position will not manage employees. Skills & Abilities Needed for Position: Must be able to show proficiency on heavy equipment Must be able to successfully complete training on other landfill equipment, as necessary Must be dependable, a self-starter, and able to identify and perform daily operational requirements Must possess good communication skills and be able to communicate effectively and professionally with others Experience & Knowledge Needed for Position: Minimum of three years experience operating heavy equipment such as an excavator, backhoe, dozer, and off-road truck or similar experience preferred Must pass a written and operational test to be certified to operate each piece of heavy equipment *Specific to Boyd County - Must successfully complete hazardous waste management training, as provided in the Personnel Training Plan for Hazardous Waste Job Duties, within six months of employment or assignment to such job duties, along with an annual review of the initial training Physical Requirements in a Regular Workday: Frequently lifting/carrying a max of 10 lbs. Occasionally lifting/carrying a max of 20 lbs. Rarely lifting/carrying a max of 100 lbs. Continuously pushing/pulling a max of 10 lbs. Frequently pushing/pulling a max of 20 lbs. Rarely pushing/pulling a max of 100 lbs. Frequently working outside in changing temperatures, wet/humid conditions. Continuously working in areas of dust, odors, mist, gases, and other airborne matter. Occasionally stooping/kneeling/crouching/crawling. Frequently climbing and/or balancing. Continuously sitting. Rarely standing/walking. Additional Working Conditions/Aspects: Possible exposure to high traffic conditions and/or tight driving areas. Exposure to residential and commercial waste. Ability to travel between offices, as required. Ability to work flexible hours; expected to work nights and weekends as needed. Ability to work overtime, weekends, and/or holidays. Legally eligible to work in the United States. Valid driver's license (if applicable). Must successfully complete pre-employment testing. Must be able to read and speak the English language. *Specific to Boyd County - Occasional work around, or moving of, containers of hazardous waste This job description is intended to describe the general nature, complexity, and level of work to be performed by employees assigned to this position and is not to be construed as an exhaustive list of responsibilities, duties, and/or skills required. It does not prescribe or restrict the work that may be assigned. Furthermore, this does not establish an employment contract and is subject to change at the discretion of the company. Rumpke Waste and Recycling is committed to equality in all aspects of employment. It is Rumpke's policy to provide equal opportunities to all employees and potential employees without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

About Us: Founded in 2012 Faxon Firearms is a leading manufacturer of high-performance firearms and components, known for quality, innovation and service. We are passionate about craftsmanship and continuously improving our products to meet the needs of both professional shooters and enthusiasts. Our company values collaboration, growth, and excellence, offering a dynamic environment for employees to thrive. Join us in shaping the future of the firearms industry! General Description: The Live Tool CNC Lathe Operator is responsible for the setup, operation, and maintenance of Doosan CNC lathes equipped with live tooling and Fanuc controls to produce precision-machined components. This position plays a critical role in maintaining part quality, machine performance, and overall productivity on the second shift. Candidates must demonstrate a strong understanding of multi-axis turning operations, blueprint reading, tool setups, and in-process inspection techniques. The ideal candidate will be a self-starter who can work independently, troubleshoot minor issues, and contribute to a team-focused manufacturing environment. Reports to: Production Supervisor Responsibilities: Set up and operate Doosan CNC lathes with live tooling, Y-axis functionality, and Fanuc controls. Read and interpret engineering drawings, blueprints, and GD&T to ensure machining to spec. Perform tool changes, set offsets, and make minor G-code edits to maintain tolerances. Conduct part inspections using precision measuring tools (micrometers, calipers, height gauges, indicators, etc.). Monitor machine performance and adjust machining parameters for efficiency and tool life. Ensure parts meet quality and dimensional standards throughout production runs. Complete required documentation including job travelers, inspection sheets, and production logs. Collaborate with programming, engineering, and quality teams for troubleshooting and process improvements. Maintain a clean, safe, and organized work area in accordance with 5S and company safety standards. High school diploma or equivalent required; technical training or machining certificate preferred. Proficiency in blueprint reading and using standard inspection tools. Familiarity with G-code programming and ability to make minor edits and offsets at the machine. Strong understanding of speeds, feeds, cutting tools, and basic machining principles. Ability to work independently with minimal supervision on second shift. Preferred Qualifications Minimum 2 years of experience operating CNC lathes, preferably Doosan with Fanuc controls and live tooling. Experience operating lathes with sub-spindles and Y-axis features. Background in high-mix, low-volume production environments. Familiarity with ISO 9001 or AS9100 standards and quality control procedures. Forklift or overhead crane experience/certification a plus. Physical Requirements Ability to stand for long periods, lift up to 50 lbs, and handle repetitive tasks. Manual dexterity and visual acuity required for precision measurements and fine detail work. Shift & Compensation Second Shift: Shift differential may apply Competitive hourly wage based on experience Overtime opportunities available Benefits Health, dental, and vision insurance 401(k) with company match Paid holidays and PTO Training and advancement opportunities

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. The Loader Operator will be responsible for moving and loading vehicles with a company-provided front-end loader or forklift. In addition, the Loader Operator will be required to maintain documentation of vehicle movement around the facility. Furthermore, the Loader Operator will be responsible for the daily pre and post-trip inspections and associated documentation of their assigned machine. In addition, the operator will maintain a safe work environment and be required to follow and be held accountable to company guidelines for safe loader operation. Finally, through a thorough understanding of Copart policy, the Loader Operator will facilitate the Copart experience by offering solutions to meet customer's needs. Ensures equipment is maintained according to company standards and customer contracts. Operates company equipment safely. Assists with the maintenance of company equipment and vehicles. Records vehicle information accurately and legibly. Operates digital camera or other basic vehicle documentation and tracking devices. Sets up yard for auctions within company timelines. Provides service to customers as needed. Maintains a positive and professional demeanor. Follows yard guidelines to maintain a safe working environment (i.e. speed limits, etc.).Must be able to load and unload vehicles as required. Must be able to pass training and safety requirements. Performs other duties as assigned. Required Skills & Experience: * HS diploma or GED preferred. * At least two years of work experience, preferably in an outdoor environment. * One year of loader or forklift experience, certification preferred. * Excellent customer service attitude and skills. * Excellent communication skills, written and verbal. * Positive attitude/High Integrity. * Ability to operate heavy equipment. * Must be able to multi-task in a fast-paced environment. * Strong attention to detail. * Occasional O.T. as needed. * Bilingual skills a plus. Pay $21.05 - $23.71 per hour Benefits Summary: * Medical/Dental/Vision * 401k plus a company match * ESPP - Employee Stock Purchase Plan * EAP - Employee Assistance Program (no cost to you) * Vacation & Sick pay * Paid Company Holidays * Life and AD&D Insurance * Discounts Along with many other employee benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: * E-verify Participation * Right to Work

Job DescriptionSalary: $23.00 - $25.00 Schedule: MondayFriday, 4555 hours/week; occasional Saturdays Loveland Excavating and Paving is seeking a reliable, honest, and hard-working individual to join our growing team. If you're committed to doing great work and showing up with a positive attitude, we want to hear from you. Role Responsibilities Understand and execute daily and weekly work plans Operate safely in all weather conditions Read and interpret construction drawings and layout stakes Operate dozers for bulk and finish grading (experience required) Work independently with minimal supervision Adhere strictly to our Employee Safety Policy Arrive on time, alert, and prepared to work Available to work 40+ hours per week, including occasional Saturdays Required Skills and Qualifications Strong work ethic with a can-do attitude Reliable, team-oriented, and able to motivate others Excellent multitasking and attention to detail Clear communicatorverbal, text, and phone Physically capable of lifting 5075 lbs on rugged terrain Respectful of other crew members and their contributions Time management and self-discipline are essential Operator - 23 years of experience operating heavy equipment Benefits We Offer Medical, Vision, and Dental Insurance 401(k) with Company Match Paid Vacation and Holidays (New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving, Christmas Day) Enjoyable Work Environment with Social Events Career Growth Opportunities

Equipment Operator II - Sanitation Department The City of Wilmington, Ohio, is seeking a full-time Equipment Operator II within the Sanitation Department. Under the supervision of the Sanitation Crew Leader, the Equipment Operator II operates various equipment for the daily operation of the Landfill in accordance with the City of Wilmington Ordinances, Personnel Policies, OSHA safety laws, and any other State and Federal authority. Current City of Wilmington employees who have successfully completed their probationary period are encouraged to apply. ESSENTIAL FUNCTIONS OF THE POSITION: Operates a variety of equipment associated with landfill processing, including compactor, water truck, track excavator, off-road haul truck, loader, and bulldozer; compacts waste after disposal. Excavates new fill sites and covers fill sites with dirt; loads and hauls dirt to various locations within the landfill site, pushes and compacts trash. Builds new roads and berms, and smooths old roads within the landfill site; sprays water on roads and covered sites to accomplish dust control; maintains and repairs perimeter fencing. Assists with surveying new fill cells. Performs periodic preventive maintenance on equipment and vehicles and keeps maintenance records on servicing. Attends meetings, serves on committees, and attends training and seminars, as directed. Meets all job safety requirements and all applicable OSHA safety standards that pertain to essential functions. Demonstrates regular and predictable attendance. REQUIRED QUALIFICATIONS: Must be at least 18 years of age. High school diploma or GED; or any equivalent combination of education, experience, and training which provides the required knowledge, skills, and abilities. At least two (2) years of experience at a Solid Waste Disposal site, including operation of heavy equipment. Must possess a valid State of Ohio Class B commercial driver's license (CDL) and must remain insurable under the City's vehicle insurance plan. COMPENSATION: The pay for this position is consistent with the City's approved pay plan. The starting pay is $21.04 per hour (Pay Range 10). APPLICATION PROCESS: Applications will be accepted through Monday, October 20, 2025. The written test will be on Tuesday, October 21, 2025, at 5:00 pm, in the Community Room located on the first floor of the Wilmington Municipal Building at 69 N. South Street, Wilmington, Ohio. Applicants must bring a government-issued Photo ID to the exam. Please contact Human Resources, via email at ********************* or by phone at **************, with any questions. Candidates must earn a score of 70% or higher to be eligible for an interview. The City of Wilmington is an equal opportunity employer. To request a reasonable accommodation to participate in the application process, please contact the City of Wilmington Department of Human Resources via email ********************* or phone **************. Please be prepared to provide information in support of your reasonable accommodation request.

6:00AM-8:00PM M-F Rumpke is a family-owned and operated company that ranks as one of the largest firms in the waste and recycling industry. Our mission is simple: to deliver exceptional waste and recycling solutions to our customers and communities through a commitment to safety, service, the environment and the growth of our people. When you join Rumpke, you'll be part of a team providing essential services to millions of residents, businesses, and neighborhoods. You will enjoy competitive pay and comprehensive benefits, including health, dental, vision, matching 401(k), life insurance, paid vacation, and more. This is your opportunity to make a difference for you and your family. Come join our team! Heavy Equipment Operators are responsible for safely operating various heavy equipment that perform the spreading, compaction, and/or loading of commercial and residential Municipal Solid Waste (MSW) or recyclable materials. Responsibilities of Position: Perform efficient safe operation of all heavy equipment including, but not limited to, bulldozers, graders, excavators, backhoes, front end loaders, wheel loaders, off road dump trucks, and other equipment as required Conduct pre-trip/post-trip inspections on heavy equipment and complete necessary documentation Perform routine maintenance on equipment, (i.e., lubricating, fueling, and cleaning equipment) Operate various equipment for general site preparation, landscaping, snow removal, and/or related assignments Continuously monitor the equipment to ensure proper operation and minimal down time, while also remaining aware of surroundings Interact with internal and external customers Clean waste from equipment body, cab, and wheels throughout the day Performing on-site Roll Off work to switch trash compactors as needed based on locations Operating the yard tractor on site to move and stage trailers as needed based on locations *Specific to Boyd County - Hazardous waste management to safely move waste materials in a manner that does not damage the tanks/containers they are held in or endanger personnel or equipment Perform other duties as assigned Supervisory Responsibility: This position will not manage employees. Skills & Abilities Needed for Position: Must be able to show proficiency on heavy equipment Must be able to successfully complete training on other landfill equipment, as necessary Must be dependable, a self-starter, and able to identify and perform daily operational requirements Must possess good communication skills and be able to communicate effectively and professionally with others Experience & Knowledge Needed for Position: Minimum of three years experience operating heavy equipment such as an excavator, backhoe, dozer, and off-road truck or similar experience preferred Must pass a written and operational test to be certified to operate each piece of heavy equipment *Specific to Boyd County - Must successfully complete hazardous waste management training, as provided in the Personnel Training Plan for Hazardous Waste Job Duties, within six months of employment or assignment to such job duties, along with an annual review of the initial training Physical Requirements in a Regular Workday: Frequently lifting/carrying a max of 10 lbs. Occasionally lifting/carrying a max of 20 lbs. Rarely lifting/carrying a max of 100 lbs. Continuously pushing/pulling a max of 10 lbs. Frequently pushing/pulling a max of 20 lbs. Rarely pushing/pulling a max of 100 lbs. Frequently working outside in changing temperatures, wet/humid conditions. Continuously working in areas of dust, odors, mist, gases, and other airborne matter. Occasionally stooping/kneeling/crouching/crawling. Frequently climbing and/or balancing. Continuously sitting. Rarely standing/walking. Additional Working Conditions/Aspects: Possible exposure to high traffic conditions and/or tight driving areas. Exposure to residential and commercial waste. Ability to travel between offices, as required. Ability to work flexible hours; expected to work nights and weekends as needed. Ability to work overtime, weekends, and/or holidays. Legally eligible to work in the United States. Valid driver's license (if applicable). Must successfully complete pre-employment testing. Must be able to read and speak the English language. *Specific to Boyd County - Occasional work around, or moving of, containers of hazardous waste This job description is intended to describe the general nature, complexity, and level of work to be performed by employees assigned to this position and is not to be construed as an exhaustive list of responsibilities, duties, and/or skills required. It does not prescribe or restrict the work that may be assigned. Furthermore, this does not establish an employment contract and is subject to change at the discretion of the company. Rumpke Waste and Recycling is committed to equality in all aspects of employment. It is Rumpke's policy to provide equal opportunities to all employees and potential employees without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Under minimal supervision, the CNC Operator operates laser machines to process parts according to blueprint specifications. This role follows established operating procedures while maintaining safety, quality, and production standards. Responsibilities Operate multiple CNC laser machines. Perform first-piece and in-process quality inspections. Maintain tooling, equipment, and supplies. Complete required daily production, quality, and SPC documentation. Follow all safety procedures and comply with quality policies, specifications, and work instructions. Qualifications High School Diploma or GED required. 0-3 years of CNC machine operating experience preferred. Strong attention to detail and verbal communication skills. Working knowledge of basic inspection tools such as micrometers, calipers, and gauges. Physical Requirements & Work Environment Frequent sitting, standing, walking, and use of hands for grasping and gripping. Occasional lifting, carrying, pushing, and pulling of up to 25 lbs. Work performed in a manufacturing environment with moderate noise levels. Schedule 2nd Shift: Monday - Thursday, 3:30 PM - 2:00 AM Pay Details: $21.00 to $25.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Excavator Operator Founded in 1935, Roto-Rooter is North America's largest plumbing, drain cleaning, and water cleanup services provider. Roto-Rooter operates businesses in over 100 company-owned branches, independent contractor territories, and approximately 400 independent franchise operations, serving approximately 90% of the U.S. population and parts of Canada. If job security, top pay, excellent benefits, and career advancement representing a well-known national brand are what you're looking for, Roto-Rooter is the company for you. We pride ourselves on being a great place to work, providing excellent pay, flexible work schedules and top benefits. We are growing and have an excellent opportunity for a Skilled Heavy Equipment Operator, especially backhoe and/mini excavator for sewer & water service repairs/replacements. Responsibilities * Operates back-hoe, mini-excavator, skid steers, and/or other excavation machinery equipped with scoops, shovels, or buckets to excavate and load loose materials on residential and commercial job sites. * Load, unload and secure equipment on transport trailers according to guidelines. * Follow OSHA and Roto-Rooter safety procedures. * Work collaboratively with a crew to efficiently complete excavation work on various projects. * Interact with customers as needed, providing excellent customer service and addressing their requirements professionally. * Maintain excavation equipment and gather all necessary equipment from the branch and/or rental companies to ensure smooth operations during excavation tasks. * Perform excavation work in confined spaces and open trenches, adhering to safety protocols and guidelines. * Locate and arrive at job sites promptly, ensuring safe driving and operation of service vehicles between locations. Requirements * Essential requirement: Construction experience in both residential and commercial projects. * Mandatory requirement: Possession of a current CDL Class A license for this position. * Trenchless water, sewer & gas experience is a plus. * Ability to work a flexible schedule, including nights and weekends, as required for the role. * Complete jobs within specified timelines. Benefits At Roto-Rooter we believe our greatest investment is in our employees. We prioritize the health and well-being of our team and their families. That's why we offer an extensive employee benefit package including: * Medical insurance with a Prescription Drug Card * Accident and Critical Illness Insurance * Dental Insurance * Vision Insurance * Paid Vacation * Paid Training * Life Insurance * Matching 401K Retirement Savings Plan * Tuition Reimbursement * Profit Sharing Roto-Rooter offers excellent career paths for military veterans and personnel transitioning to civilian professions. Throughout our 86 years in business, we've found that military training and structure are a great fit at our company. EEO Statement We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, religion, color, sex, gender, age, national origin, veteran status, military status, disability, gender identity, sexual orientation, genetic information, or any other characteristic protected by law. Advertising Tags IND34 #LI-ONSITE

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. The Loader Operator will be responsible for moving and loading vehicles with a company-provided front-end loader or forklift. In addition, the Loader Operator will be required to maintain documentation of vehicle movement around the facility. Furthermore, the Loader Operator will be responsible for the daily pre and post-trip inspections and associated documentation of their assigned machine. In addition, the operator will maintain a safe work environment and be required to follow and be held accountable to company guidelines for safe loader operation. Finally, through a thorough understanding of Copart policy, the Loader Operator will facilitate the Copart experience by offering solutions to meet customer's needs. Ensures equipment is maintained according to company standards and customer contracts. Operates company equipment safely. Assists with the maintenance of company equipment and vehicles. Records vehicle information accurately and legibly. Operates digital camera or other basic vehicle documentation and tracking devices. Sets up yard for auctions within company timelines. Provides service to customers as needed. Maintains a positive and professional demeanor. Follows yard guidelines to maintain a safe working environment (i.e. speed limits, etc.).Must be able to load and unload vehicles as required. Must be able to pass training and safety requirements. Performs other duties as assigned. Required Skills & Experience: HS diploma or GED preferred. At least two years of work experience, preferably in an outdoor environment. One year of loader or forklift experience, certification preferred. Excellent customer service attitude and skills. Excellent communication skills, written and verbal. Positive attitude/High Integrity. Ability to operate heavy equipment. Must be able to multi-task in a fast-paced environment. Strong attention to detail. Occasional O.T. as needed. Bilingual skills a plus. Pay $21.05 - $23.71 per hour Benefits Summary: · Medical/Dental/Vision · 401k plus a company match · ESPP - Employee Stock Purchase Plan · EAP - Employee Assistance Program (no cost to you) · Vacation & Sick pay · Paid Company Holidays · Life and AD&D Insurance · Discounts Along with many other employee benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: E-verify Participation Right to Work

Schedule: Monday-Friday, 45-55 hours/week; occasional Saturdays Loveland Excavating and Paving is seeking a reliable, honest, and hard-working individual to join our growing team. If you're committed to doing great work and showing up with a positive attitude, we want to hear from you. Role Responsibilities Understand and execute daily and weekly work plans Operate safely in all weather conditions Read and interpret construction drawings and layout stakes Operate dozers for bulk and finish grading (experience required) Work independently with minimal supervision Adhere strictly to our Employee Safety Policy Arrive on time, alert, and prepared to work Available to work 40+ hours per week, including occasional Saturdays Required Skills and Qualifications Strong work ethic with a can-do attitude Reliable, team-oriented, and able to motivate others Excellent multitasking and attention to detail Clear communicator-verbal, text, and phone Physically capable of lifting 50-75 lbs on rugged terrain Respectful of other crew members and their contributions Time management and self-discipline are essential Operator - 2-3 years of experience operating heavy equipment Benefits We Offer Medical, Vision, and Dental Insurance 401(k) with Company Match Paid Vacation and Holidays (New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving, Christmas Day) Enjoyable Work Environment with Social Events Career Growth Opportunities