Operator jobs in Corvallis, OR

Chemical Production Operator Job, Springfield, OR We are currently seeking a Chemical Production Operator E for our Springfield, OR location. Reporting into the Production Supervisor, this position is an entry-level, full-time position, and Operator is responsible for performing tasks and duties pertaining to the manufacturing and processing of resins and formaldehyde. This role is required to know and perform all assigned production department functions in compliance with HSE - Health, Safety and Environmental regulations and Arclin's policies and procedures to contribute positively to an efficient and safely run operation. Starting pay - $25.31/hr for Operator E; (can advance to Operator C with time and experience) Starting pay - $33.38/hr for Operator C; (further advancement opportunities available) Chemical Production Operator Job Responsibilities: Manufactures resin and formaldehyde safely and according to procedure. Unloads and loads raw materials and finished products following established procedures (tanker trailers, railcars, box trucks, and bulk trucks) Operates a forklift to load/unload raw materials (drums, totes, bags) Collaborates with management to meet the production and shipping schedule Ensures required shipping documents are completed and procedures are followed to be in compliance with all regulations and corporate requirements Participates in the Joint Health and Safety Committee to facilitate safety improvements Follows all site rules and procedures as they apply to quality, health, safety, and the environment Visually monitors processes within their area of accountability and immediately informs the Lead Operator of any deviations or abnormalities Works in close coordination with the Lead Operator to accomplish the tasks needed to safely and efficiently meet production and maintenance schedules across all processes Communicates and confers with the Lead Operator as well as with Technical, Supervisory, and Support Personnel to resolve process conditions affecting safety, efficiency, and product quality Responds to process alarms and interlocks promptly and coordinates timely confirmation and corrective actions to resolve conditions generating the alarms and interlocks Performs In-Process Checks (IPC's) to verify batch progression and quality using laboratory equipment (GC, Titrator, pH meter, etc.) Performs troubleshooting in the event of process deviations Perform routine housekeeping such as sweeping, powerwashing etc. Chemical Production Operator Job Qualifications: Must be ok with rotating 12 hour shifts. (Days/Nights/Evenings rotating every week) Experience with rotating shifts preferred Able to work independently High School Diploma Required or GED. Forklift experience a plus but must be able to become certified. Capable of operating rail mover unit or willing to learn. Analytical and mechanical mindset needed to be successful in this role. Previous chemical/ manufacturing experience a plus. Must be ok with following strict Health and Safety Guidelines and wear required PPE (Personal Protective Equipment). Ability to sit, stand walk and climb frequently working in elevated areas. Will lift an average of 50 lbs. frequently. Basic computer skills required. DCS Distributed Control Systems experience a plus Basic math skills required including the use of a calculator. Major Benefits available to full-time employees include: Comprehensive Health Insurance: medical, dental, orthodontia (for dependents only) Company paid Life & Disability Insurance Spousal & Dependent coverage available for purchase Business Travel Accident Insurance Retirement Savings Plan - 401(k): traditional & Roth Company match of .70c per dollar, up to 6%-, and 5-year vesting program available after 90 days of employment Employee Incentive Program (EIP) - At Arclin, success is never the result of just a single input, but a culmination of our entire team working hand-in-hand to provide value to our customers. As such, the fruits of our success are shared with every full-time employee via our Employee Incentive Program. Awards are paid mid-February of every year, and are dependent on company EBITDA performance Flexible, Paid Vacation, Company Paid Holidays, and two (2) floating holidays Parental Leave Tuition Reimbursement Employee Assistance Program Wellness Programs Community Involvement Activities

Job Title: Food Production Machine Operator Swing Shift Hiring Now Hours: Tuesday to Saturday 3:30PM - 11:30PM Pay: $23.25/hr The Production Support Worker will play an essential role in the hands on manufacturing of yogurt, cottage cheese, and dairy products. This is a great opportunity to be a part of a local manufacturing facility and further your career in this industry. As a Production Support Worker, you will be responsible for: Operate product fillers, CIP systems, batching/mixing of products, and support production lines Case packing and building pallets Follow all food production GMPs and food safety guidelines The ideal candidate for this role will have: Must be able to stand 8+ on feet on concrete throughout duration of shift Must be able to lift up to 35lbs on an occasional basis Benefits: Ask us about our Referral Bonus Program to earn extra cash! Ready to take the next step? Apply now for this Production Support role in Eugene-or contact us to learn more! #STEUG

Company Overview Imagine Everything. Build the Future with Hexion. At Hexion, we push boundaries, rethink possibilities, and create real impact. We activate science to deliver progress-developing breakthrough solutions that strengthen industries, protect communities, and drive a more sustainable future. This is where bold thinkers, problem-solvers, and innovators come together to shape what's next. Whether you're engineering advanced materials, transforming manufacturing technologies, or leading strategic innovation, your ideas and actions leave a lasting mark. We cultivate an inclusive culture of growth, collaboration, and accountability, ensuring every contribution propels us forward. We don't follow the status quo-we challenge it, disrupt it, and improve it. Every role at Hexion is part of something bigger. We invest in innovation, sustainability, and continuous development-equipping you with the tools, training, and opportunities to excel. With an unwavering commitment to safety, partnership, belonging, and impact, we empower you to lead change and strengthen industries worldwide. Your Future Starts Here. If you're ready to push limits, reimagine what's possible, and create the extraordinary, Hexion is where you belong. Anything is possible when you imagine everything. What We Offer * Healthcare from Day One: Medical, dental, vision, and parental leave * 401(k) with Match * Incentive Bonus Potential: Up to $6K annually * Paid Time Off: 3 weeks vacation to start + 16 hours of volunteer time * Includes 14 Paid Holidays per Year, +1 Floating Holiday * Ongoing Training & Development Position Overview Work as part of a diverse team to produce adhesives and chemicals such as thermoset resins for sustainable wood products including plywood and particle board. Function as part of a respectful, safe, and environmentally responsible manufacturing team. Comply with all company policies, procedures, and rules. Hexion will provide training on job duties and safety requirements. Job Responsibilities EH&S * Proactively seek to identify and eliminate hazards in the workplace. * Understand and ensure safety standards are met. * Participate in safety training and audits. * Maintain working area in clean and safe conditions at all times. * Assist in permit generation for site maintenance and contractor work. * Follow policies and procedures to ensure the safe handling of hazardous materials and waste. * Ensure environmental incidents are properly reported and emergency response activities are activated. * Follow procedures so operations activities occur within the limit and boundaries of our operating permits and regulations. Production * Produce products to meet the requirements of Hexion customer specifications. * Transfer and package raw materials and products within the plant using automated and manual systems. * Record batch information and manage inventory using Hexion's computer warehouse system. * Contribute positively to the team environment and communicate between different shifts, departments, and external resources. * Troubleshoot issues with equipment and communicate with site maintenance to address issues. * Perform analytical testing of in-process samples and finished products. * Report deviations from the production schedule and help perform root cause analyses to minimize future lost time. * Understand, support, and ensure all company policies and procedures are followed. * Perform other duties as assigned. Competencies * 3+ years' experience in similar role * Chemical handling experience * Understanding of process equipment * Ability to use SAP * Experienced forklift operator * Familiar with Microsoft Office Minimum Qualifications * High school diploma or equivalent. * 1-2 years' experience in an industrial environment, willing to train and learn. * Ability to work shifts (rotating and on call). * Strong oral and written communication skills. * Mechanical aptitude Physical Requirements: * Constantly wear full and half face respirators. * Constantly work from heights, including stairs, and climbing ladders. * Frequently perform work indoors and outdoors in varying weather conditions. * Frequently Lift/Carry up to 55lbs * Constantly standing/walking * Frequent sitting * Constantly twist to stoop, kneel, crouch or crawl Be Part of Something Bigger Join Hexion and become part of a company that is powering innovation through chemistry to make the world safer, cleaner, and more sustainable. We value integrity, collaboration, and excellence-and we recognize and reward our employees who exemplify these values every day. Apply today to take the next step in your career with Hexion. Together, we'll build what's next in chemical innovation. Other We are an Equal Opportunity, Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to gender, pregnancy, race, national origin, religion, age, sexual orientation, gender identity, veteran or military status, status as a qualified individual with a disability or any other characteristic protected by law. To be considered for this position candidates are required to submit an application for employment through our career site and, be at least 18 years of age. Any offer of employment will be conditioned upon successful completion of a drug test and background investigation, as well as authorization for the Company to conduct additional periodic background checks as required by the Chemical Facility Anti-Terrorism Standards (CFATS) or regulations adopted by the department of Homeland Security or other regulatory agencies. A prior criminal record is not an automatic bar to employment, and the Company will conduct an individualized assessment and reassessment, consistent with applicable law, prior to making any final employment decision.

Job DescriptionDescription: Ascentec is hiring! We are looking for a Machine Operator to join our team in Dallas, Oregon ! This is an excellent "foot in the door" opportunity for someone with strong mechanical aptitude/skills and attention to detail. We like to grow our talent from within -- come get started with us and carve your own career path! Swing Shift: Monday through Thursday, 4 p.m. to 2:30 a.m. This position is on site (not remote/not hybrid) at our Dallas, Oregon facility and not eligible for Visa sponsorship. Requirements: Job Responsibilities: Included, but not limited to: • CNC setup and operation • teach tools, load programs and set/adjust work/tool offsets accordingly • Read prints and inspect parts for conformance, typically +/- .005 tolerance • Check parts using basic measuring tools such as calipers, micrometers, and depth gauges • Trade school and/or at least one year of experience in a manufacturing environment preferred Personal Qualifications: • Reliable and Dependable • Self-Starter/Self-Motivated • Team Player with professional demeanor and respectful to people in all situations • Quality Oriented • The employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of the job, absent undue hardship. The employer retains the right to change or assign other duties to this position. Compensation / Benefits: • $18 to $23 per hour • Paid time off / Holiday pay • Medical/Dental/Vision coverage • Short- and long-term disability coverage • 401(k) with matching funds • Profit sharing eligibility • Educational aid program availability Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Requirements Job Responsibilities: Included, but not limited to: • CNC setup and operation • teach tools, load programs and set/adjust work/tool offsets accordingly • Read prints and inspect parts for conformance, typically +/- .005 tolerance • Check parts using basic measuring tools such as calipers, micrometers, and depth gauges • Trade school and/or at least one year of experience in a manufacturing environment preferred Personal Qualifications: • Reliable and Dependable • Self-Starter/Self-Motivated • Team Player with professional demeanor and respectful to people in all situations • Quality Oriented • The employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of the job, absent undue hardship. The employer retains the right to change or assign other duties to this position. Compensation / Benefits: • $18 to $23 per hour • Paid time off / Holiday pay • Medical/Dental/Vision coverage • Short- and long-term disability coverage • 401(k) with matching funds • Profit sharing eligibility • Educational aid program availability Applicant must be able to pass a drug screen and criminal background check prior to employment. ITAR REQUIREMENTS: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Ascentec Engineering is an Equal Opportunity Employer; employment with Ascentec Engineering is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Salary Description $18 to $23 per hour DOE

This position will perform a variety of tasks necessary for preparation, processing, and packaging of food and non-food products and lead processing room operations. Working schedule: 2nd Shift/Swing 2:45pm-11:15pm Monday-Friday Main aspects of the role include: Operate food processing machinery, involving setup and teardown Direct crew activities (4 - 6 crew members) Food processing room cleaning/sanitizing Ensure process/product quality is maintained Communicate with packaging crews, coordinators, and/or supervisors Don't meet all the requirements? Don't worry! We're always open to discussing new opportunities. You might just surprise yourself… This company supports equality and diversity in employment and opposes all forms of unlawful or unfair discrimination based on age, disability, sex, gender reassignment, sexual orientation, pregnancy and maternity, race, religion or belief, and marriage and civil partnerships. Criminal background checks may be completed on all applicants. This is a drug-free workplace. Qualifications: The ideal candidate will have previous leadership experience, knowledge of production processes, and familiarity with production equipment. Strong organizational, interpersonal, and communication skills are essential. Reliable transportation is necessary, as there may be a requirement to travel between locations. Candidates should also have the ability to work 12-hour day and night shifts, including weekends and holidays. Working Place: Albany, Oregon, United States Company : Feb 27th 2025 Virtua Fair - Oregon Freeze Dey

Pay Type: Hourly Estimated Wage Range $23.50 - $27.75/Hour Amrize is building North America. From bridges and railways to data centers, schools, offices and homes, our solutions are inside the buildings and infrastructure that connect people and advance how we live. And we invite you to come and build with us. As the partner of choice for professional builders, we offer advanced branded solutions from foundation to rooftop. Wherever our customers are, whatever their job, we're ready to deliver. Our 19,000 colleagues work across 1,000 sites supported by an unparalleled distribution network. Infrastructure, commercial and residential, new build, repair and refurbishment: We're in every construction market. Amrize listed on the New York Stock Exchange and the SIX Swiss Exchange on June 23, 2025, following our spinoff as an independent company. Join us and build _your_ ambition. Learn more at ********************** (****************************************** Description: Join Amrize as a Terminal Operator and help construct whats next. If you're ready to put your skills to work on projects that matter - and build a career with a company that's building North America - we want to hear from you! **ABOUT THE ROLE** Reporting to the Terminal Manager, the Terminal Operator is responsible for the safe operation of a cement distribution terminal. It requires the hands-on operation and occasional maintenance of all terminal equipment, developing a proficiency in bulk truck and bulk railcar operations. Safety, quality, and customer service are the primary focus of the terminal. The terminal receives product by bulk rail transport, stores the product, and loads customer bulk trucks. The manner in which trucks are expedited, customers are handled, and qualities are ensured are key functions of this position. This is a safety sensitive position. A positive attitude, mechanical aptitude, and the ability to be a team participant in a small cross-functional group are essential elements for a successful terminal operator. The terminal has a team commitment to operating in the safest and most environmentally responsible manner following all known safety laws, regulations and policies. Providing the highest level of quality and customer service to our customers is a priority at the terminal. Maintaining terminal equipment, good housekeeping in all work areas, and operating equipment safely is vital to efficient terminal operations. **WHAT YOU'LL ACCOMPLISH** + Comply with all known Local, State and Federal Laws and Regulations + Load bulk trucks correctly, provide legal weights and proper product for customer delivery/pick-up. + Perform routine maintenance on all terminal property and equipment. Maintain the terminal in a clean and presentable state. + Perform clerical functions following the established guidelines for the recording of receipts, shipments and inventory records. + Responsible for unloading railcars, transferring of product into proper silos, sampling and testing of products received and shipped. + Work at heights, in enclosed or confined spaces, near water, work around moving equipment and machinery and physically able to lift up to 50 lb. + Recognize and correct deficiencies, maintain high quality standards and work without supervision. + Perform all other duties and functions required by the supervisor associated with the operation of the terminal as long as those duties do not present a hazard or violate any known governmental law. + Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. **WHAT WE ARE LOOKING FOR** **Education:** High School diploma required **Required Work Experience:** related industry expereince **Required Technical Skills:** Mechanical aptitude preferred **Additional Requirements:** + Must be able to wear a respirator, a full body harness, and other required personal protective equipment. + Competence with computer applications such as Microsoft Office and Google Suite + Good telephone and interpersonal skills + Ability to learn and retain information + Possess a pleasant and positive working demeanor with customer, fellow co-workers, and the public + Ability to perform clerical tasks in a neat and accurate manner + Ability to maintain high quality standards, be responsible, dependable, and work without supervision + Must work well with others and be a "Team Player" + Strong communication skills; able to effectively communicate in English, both verbally and in writing, with fellow employees, customers, sales personnel, trucking firms and suppliers. + Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. + Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Subject to applicable law, employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. **WHAT WE OFFER** + Estimated Wage Range: $23.50 - $27.75 per hour + Retirement Savings: Choose from 401(k) pre-tax and/or Roth after-tax savings + Medical, Dental, Disability and Life Insurance + Holistic Health & Well-being programs + Health Savings Accounts (HSAs) & Flexible Spending Accounts (FSAs) for health and dependent care + Vision and other Voluntary benefits and discounts + Paid time off & paid holidays + Paid Parental Leave (maternity & paternity) + Educational Assistance Program + Dress for your day **_This is a safety sensitive position, and as part of our dedicated focus on the health and safety of all employees, a pre-employment physical, drug and alcohol testing and a criminal record check, may be required._** **BUILDING INCLUSIVE WORKSPACES** At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com . This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. **Nearest Major Market:** Eugene

Essential Functions: Must be able to perform all duties in extreme types of weather from very hot to very cold. Perform work in a safe manner, observing all safety rules and regulations pertaining to the job or work area. Punctuality and consistent attendance required. An ability to obtain and maintain torch, overhead and forklift certification. Experience in manufacturing a plus. PHYSICAL REQUIREMENTS Sitting: Rarely, while on breaks. May also sit when operating trackmobile or forklift or crane. Standing/Walking: Continually. While walking on gravel and concrete as well as smooth, rough and uneven surfaces, including debris Crouching (Bend at Knees): Occasionally. While aligning couplers. Stooping: Occasionally use torch to cut scrap and look under cars for debris and while shoveling scrap. Reaching: Occasionally. While pulling stickers off stacks up to six feet high. Occasional overhead reach to remove debris extending beyond sides of cars and while shoveling loads weighing up to 50 pounds. Twisting/Turning: Frequently. While throwing rail switches (requires greater than 70 pounds of pressure) and while shoveling debris. Climbing: Frequently. While climbing on and off moving equipment (forklift, trackmobile and water truck) and on extension of cars to remove debris. Also while climbing over debris. Crawling: Occasionally. On uneven and rough ground to work on derailment 9. Kneeling: Occasionally. Work on derailments and pulling scrap out from under railcars. Leg/Foot Control: Frequently. To release switch handles. Handling: Rarely. Removing stickers (25 to 60 pounds) from stacks. Fingering/Feeling/Grasping: Frequently. While grasping ladder on side of railcars up to ten minutes at a time, shoveling scrap. Balance: Continually. Must have good balance and coordination while working around moving equipment. Vehicle Use: Occasionally. Forklift (four- and ten-ton), water truck, golf carts (rarely). Pushing/Pulling: Frequently. Aligning couplers. Also requires the ability to lift body weight onto handles of railcars to climb onto car. Lifting/Carrying: Frequently moves 25 to 60-pound stickers from the ground and stacks to six feet high and shovels steel during cleanup (25 pounds). Must also be able to lift body weight onto rail car by handles of cars. USE OF SENSES Talking in Person/By Telephone/Two-Way Radio: Continually while communicating with Trackmobile Operator over radio (when stepping up to Switchman). Hearing: Continually. For radio communication with trackmobile and to hear sirens and alarms. Vision: Near/Far Vision: Continually. To see traffic and debris on track and moving equipment. Requires good peripheral vision and depth perception. Smell: Occasionally. To detect fire and fumes. Qualifications: High school diploma or GED. Must be able to communicate using hand signals and have both written and verbal communication skills. An ability to read and speak English and understand written and verbal instructions in English, Good balance and coordination as well as common sense. PLEASE NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. All U.S. applicants must be 18 years of age or older and all Canada applicants must be 16 years of age or older. Radius Recycling participates in e-verify for all U.S. new hires. An offer of U.S. employment by Radius Recycling or any of its subsidiaries is contingent on the satisfactory completion of a post-offer drug screen and background check. All new hires must review and sign an Arbitration Agreement. This applies to all U.S. non-union employees. As an Equal Opportunity Employer, Radius Recycling does not discriminate on the basis of race, religion, color, sex, marital status, disability status, national origin or ancestry, veteran status, age, prior industrial injury, sexual orientation, genetic information, or any other protected status under local, state or federal law.

Chem Mill Operator - Aerospace Parts Manufacturing - Multiple Shifts If you would love to be part of a company that is poised for substantial growth with opportunities for advancement then working for CPP and it's subsidiaries may be the right fit for you! We have multiple facilities in Albany, OR and are a world class supplier of titanium castings and components for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Chemical milling is used in the aerospace industry to remove shallow layers of material from large aircraft components and extruded parts for aerospace parts and other components. Primary Purpose: Chem Mill Operators will be responsible for moving titanium castings by means of a large hand cart throughout the manufacturing area, performing sandblasting, and processing castings through a chemical milling process to specific dimensions. Duties and Responsibilities: * Move titanium castings by means of a large hand cart throughout the manufacturing area. Deliver castings to various departments. * Process castings through a chemical milling process to specific dimensions. * Operate a part dryer. Minimum Qualifications and Experience: * Prior industry experience preferred. * Able to understand, comprehend, and follow all verbal and written instructions. * Compliance with general company attendance standard is required. * Must be able to withstand long periods of standing and walking. * HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered. * Must be at least 18 years of age. * Solid job history including more than 1 year at previous or recent employer. * Must be able to lift up to 50 lbs with or without reasonable accommodations. * Must be willing to undergo a pre-employment background check. * Must be willing to participate in pre-employment and periodic drug screening. Working Conditions: * Frequently works near moving mechanical parts. * Exposure to dust. * Noise level is within OSHA regulations. * Air quality is below OR-OSHA limits. Schedule: * Swing shift (4 X 10) Mon- Thursday with $1.00 shift premium * Weekend Nights (3 X 12) Friday - Sunday with $2.50 shift premium * Weekend Days (3 X 12) Friday - Sunday with $1.25 shift premium * This role may be training on a different shift and then moving to Swing or Weekend shifts after training. Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: *********************** U.S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U.S. persons are U.S. citizens, legal permanent residents as defined by 8 U.S.C. 1101(a)(20) or protected individuals as defined by 8 U.S.C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. This is a non-management position This is a full time position

Stay comfortable at Northern Gold Foods! We are a climate-controlled facility. Northern Gold Foods (USA) is actively recruiting Production Operators to join our team here at our Junction City, Oregon location. Great products begin with great people, and we're always looking for the best. We produce a variety of breakfast and granola products for some of the world's most iconic brands and retailers. With state-of-the-art facilities, and unmatched experience, we solve challenges that others can't. That's why many consider us the best in the world at what we do. SUMMARY: Production Operators are responsible for setting up, operating, troubleshooting, and sanitizing our production lines. SHIFT TIMES: Our Weekend Nights Production Operators are scheduled to work three 12-hour shifts, Friday through Sunday. Currently, the start times available are 5:00 PM and 7:00 PM. ESSENTIAL JOB FUNCTIONS: Directly work with the Production Lead/Supervisor to ensure that the bar and/or granola lines are running properly Operate production line equipment including, but not limited to, industrial mixers, scales, printer labelers, ovens, cooling tunnels, high-speed packaging machinery and various other equipment related to food production Accurately measure and prepare food ingredients by following written recipes Ensure packaging materials are set up according to customer specifications Perform sanitation of production equipment, parts, and the surrounding environment Accurately record documentation to verify compliance with all required quality specifications and procedure checks for the assigned area Report all safety concerns immediately to direct supervisor(s) upon discovery Troubleshoot machinery as needed Work collaboratively with peers and leadership Follow all safety, quality and GMP requirements of the position Other special projects as assigned ESSENTIAL QUALIFICATIONS: Must be detailed oriented The ability to work independently by utilizing all trained processes and procedures with minimal supervision Basic math skills such as addition, subtraction, multiplication and division Able to receive, digest and implement constructive feedback provided by leadership Experience in food manufacturing, or production, is preferred but no required Forklift experience is an asset, but not a requirement The ability to speak, read and write English fluently as it pertains to fulfilling the job requirements PHYSICAL DEMANDS Standing and walking for up to 12 hours Able to lift and carry 25 to 50 lbs. Able to push/pull more than 1,000 lbs. using pallet jack Able to continually bend, stoop, twist, and use of arms, wrists, and hands (including grasping and squeezing) throughout shift Able to occasionally kneel, reach above the shoulder, work at heights, and climb stairs with ingredients weighing 25 to 50 lbs. BENEFITS: A la carte health, dental, and vision plans 401k 8 Paid holidays AD&D & Life insurance Retention bonus program Merit raises Competitive PTO policy Employee referral program And more Northern Gold Foods is an Equal Opportunity Employer. We are committed to creating an inclusive environment where all qualified applicants receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected characteristic.

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. The Loader Operator will be responsible for moving and loading vehicles with a company-provided front-end loader or forklift. In addition, the Loader Operator will be required to maintain documentation of vehicle movement around the facility. Furthermore, the Loader Operator will be responsible for the daily pre and post-trip inspections and associated documentation of their assigned machine. In addition, the operator will maintain a safe work environment and be required to follow and be held accountable to company guidelines for safe loader operation. Finally, through a thorough understanding of Copart policy, the Loader Operator will facilitate the Copart experience by offering solutions to meet customers' needs. * Ensures equipment is maintained according to company standards and customer contracts. * Operates company equipment safely. * Assists with the maintenance of company equipment and vehicles. * Records vehicle information accurately and legibly. * Operates digital camera or other basic vehicle documentation and tracking devices. * Sets up yard for auctions within company timelines. * Provides service to customers as needed. * Maintains a positive and professional demeanor. * Follows yard guidelines to maintain a safe working environment (i.e. speed limits, etc.). * Must be able to load and unload vehicles as required. * Must be able to pass training and safety requirements. * Performs other duties as assigned. Required Skills & Experience: * HS diploma or GED preferred. * At least two years of work experience, preferably in an outdoor environment. * One year of loader or forklift experience, certification preferred. * Excellent customer service attitude and skills. * Excellent communication skills, written and verbal. * Positive attitude/High Integrity. * Ability to operate heavy equipment. * Must be able to multi-task in a fast-paced environment. * Strong attention to detail. * Occasional O.T. as needed. * Bilingual skills a plus. Pay $21.05 - $23.71 per hour Benefits Summary: * Medical/Dental/Vision * 401k plus a company match * ESPP - Employee Stock Purchase Plan * EAP - Employee Assistance Program * 10 Vacation days per year * 7 Paid Company Holidays * Life and AD&D Insurance Along with many other employee benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: * E-verify Participation * Right to Work

Established in 1988, Kerr Contractors is a leading heavy civil general contractor and construction management firm headquartered in Woodburn, Oregon. Kerr Contractors is recognized as one of the most technically advanced earth-moving, road building, and underground utility contractors in the region. Our business is founded on trusting relationships, excellent service, workmanship that has enduring character, and meeting or exceeding customer expectations every time. We have staked our reputation on our ability to deliver each of these. What You'll Do: * Daily check fluids, worn parts, tires, glass, and general condition of the machinery assigned to use. -Report issues and maintenance required immediately. * Safely and productively operate machinery assigned. Adapt to changing environments, including traffic, soil conditions, and weather. * Utilize GPS systems to read and understand grade stakes and hubs for grade control and finishing. * Manage materials efficiently, whether excavating, loading haul vehicles, placing materials, fine grading, or installing utilities. * Operate a range of machine sizes and types for required use and application, including excavators, wheel & track loaders, dozers, compactors, articulated and ridged frame haul trucks, wheel scrapers, tractors, and graders. What You'll Need: * Must have 3 years minimum experience operating machinery- * Demonstrated knowledge and competency in operating various types of heavy equipment * Extensive earthwork and grading experience utilizing machinery for tasks such as: Mass earthwork, Loading of hauling vehicles. Placing materials, Compacting, Moisture conditioning, Fine grading * Proven utility experience using machinery for tasks including: Trench excavation, Setting pipe, appurtenances, and structures * Implementing shoring processes and systems, such as trench shields, hydraulic shores, sheet piling, soldier pile/lagging, sloping, and benching * Ability to operate each machine safely while maintaining situational awareness at all times * Skilled in recognizing and promptly addressing mechanical issues related to engine, hydraulic, and electrical systems, taking appropriate action to shut down and secure the machine to prevent further damage * Hold a valid driver's license and demonstrate a history of responsible driving habits * Willingly consent to a pre-employment drug screening and thorough background check Compensation & Benefits: * Pay Range: $25 - $35 per hour * Comprehensive health insurance coverage, including medical, dental, and vision, with employer-paid monthly premiums after the designated waiting period for individual/dependents at a later date * Flexible Spending Accounts (FSA) available for eligible employees * 401(k) retirement savings plan with an employer match of up to 4% of the employee's contribution * Competitive salary commensurate with experience and qualifications * Vacation/Sick Leave per OPL * Opportunities for community involvement and volunteering * Regular team building events to foster collaboration and camaraderie * Annual company-wide events to celebrate achievements and milestones

Job title: Loader Operator Duration: 10 months Term Responsible for preparing organic mixes using a heavy equipment loader, pushes piles to ensure segregation of materials and places material in the shakers to ensure the machines have a continuous flow of material Ability to operate and maintain heavy equipment (loader/dozer) Ability to maintain stockpile slopes to ensure safe work environment Ability to sit in a loader for many hours in a dusty, hot environment Ability to climb into and out of equipment repeatedly Knowledge of safe practice and procedures Ability to read English and/or follow instructions, and communicate effectively Qualifications Major Job Duties and Responsibilities: Prepares organic mixes by using the Bill of Materials to ensure the correct ingredients are used in the correct proportions. Supplies the line with a continuous supply of material Pushes piles to ensure setbacks, pile height and stockpile shaping meets the criteria set by the Department of Environmental Health Services Performs a safety and equipment check before each use of the loader Receives load tickets from haulers, ensures accuracy, signs, accumulate until the end of the day and forwards the tickets in a neat and clean appearance to the office personnel for inventory entry Pumps diesel fuel into the loader by an electrical pump and ensures all safety practices are used to prevent injury Monitors the stock piles for excessive heat, turns stockpiles and ensures the proper amount of water is used to prepare the stockpile for production use Meets quality and quantity standards- Performs the proper operation and minor maintenance of equipment- Accurately verifies quantity of material. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Legacy Talent Search is currently seeking candidates for a Swing Shift Laser Operator role in Donald, OR. Our client is a well-established industry leader known for innovation and a commitment to delivering the highest quality products. With a focus on continuous improvement, they pride themselves on maintaining excellence at every stage of their manufacturing process. Key Responsibilities: · Perform daily machine startup and shutdown procedures on CNC cutting equipment. · Stage raw materials to work centers in alignment with the daily production schedule. · Utilize proper rigging techniques to safely load and unload materials from machines. · Operate laser cutting machines with precision to produce high-quality components that meet exact specifications. · Interpret technical drawings and blueprints to execute accurate, efficient cuts. · Conduct regular maintenance checks on laser equipment to ensure peak performance and minimal downtime. · Collaborate closely with engineering and fabrication teams to improve production processes and workflow efficiency. · Perform quality inspections on finished products to ensure compliance with industry standards and customer requirements. · Assist in troubleshooting equipment issues as they arise during production. · Maintain a clean, organized, and safe work environment in accordance with company policies. · Accurately document production data and report any discrepancies or opportunities for improvement. Qualifications: · Proven mechanical aptitude and experience operating laser cutting machines or similar CNC equipment. · Strong assembly skills and proficiency in using hand tools effectively. · Familiarity with GD&T principles preferred but not required. · Welding experience is a plus but not mandatory. · Demonstrated ability to perform quality inspections and ensure product accuracy. · Basic understanding of calipers and measuring tools for precision measurements. · Forklift operation experience is beneficial but not essential. · Knowledge of lathe operations and tooling techniques is advantageous. · Ability to lift up to 50+ lbs and stand for extended periods in a manufacturing environment. · Excellent teamwork, communication, and problem-solving skills. · Flexibility to work 2nd shift and occasional overtime as needed. What We Offer: · Competitive hourly wage. $21-$24 DOE · Comprehensive benefits package, including health insurance and paid time off. · Opportunities for growth and advancement within the company. · A supportive and inclusive workplace culture. · The chance to contribute to a company that values precision, innovation, and craftsmanship. At Legacy Talent Search, we are more than just a staffing agency. We are dedicated to supporting the growth of the American economy and way of life, one job at a time. With a focus on rebranding the staffing industry, we work tirelessly to show how a specialized recruiting team can drive productivity. Our legacy is built on people and community-how we help others is how we leave our mark. Join us today and discover how we #recruitdifferently. Legacy Talent Search is an equal opportunity employer.

Key Responsibilities Clean and sanitize totes (interior and exterior) according to company procedures and safety standards. Operate cleaning equipment such as pressure washers, pumps, and chemical cleaning systems. Safely handle paints, solvents, and cleaning chemicals in compliance with safety data sheets (SDS). Inspect totes for damage, wear, or contamination; report issues to supervisor. Maintain accurate cleaning and inspection records. Ensure proper labeling and storage of clean totes. Follow all company policies, including environmental, health, and safety requirements. Assist with general plant cleaning, maintenance, and other duties as assigned. Work Environment Industrial plant setting with exposure to paints, solvents, and cleaning chemicals. May involve wet, noisy, or dusty conditions. Requires adherence to strict safety and environmental practices.

General Summary: Operates basic food processing machines that produce intermediate food products. Benefits and Culture We offer a competitive compensation and benefits package designed to help employees live a healthier life, build rewarding careers and save for the future. Reser's offers choices whenever possible, because we recognize the diverse and ever changing needs of our employees. Benefits include medical, dental, vision, AD&D, life, 401(k) with discretionary match, wellness programs, paid holidays and vacation time to name few! We strive to be your Employer of Choice. As one of our five cornerstones, this means that we go all-out to create an environment where people choose a lasting career because Reser's care about their personal development & safety, and delivers a rewarding work experience. Visit our website to learn more about our competitive benefit programs - **************************************** Principal Duties and Responsibilities 1. Operates basic machines to combine raw and processed ingredients into intermediate food products. 2. Observes machine operation to ensure quality and conformity to company guidelines. 3. Cleans and sanitizes machines according to company guidelines. 4. Ensures product date, weight, and temperatures are within established guidelines. 5. Maintains a clean and sanitary work area. 6. Follows company safety guidelines, HACCP requirements and Good Manufacturing Practices. 7. Regular attendance and punctuality is required due to working with people, items and equipment that are at the facility. Job Specifications 1. Experience operating machinery is preferred. 2. Food industry experience is preferred. 3. Must be able to read, write, and speak English and be understood. 4. English/Spanish bilingual a plus. Working Conditions 1. Refrigerated food manufacturing plant. 2. The environment may be wet or dry and temperatures may range from 25°F to 110°F. 3. Repetitively lift and carry objects up to 50 lbs. 4. Requires walking and standing for long periods of time. 5. Production demands may require overtime and/or evening or weekend scheduling. Recipe for Success Reser's is the leading provider of fresh refrigerated deli salads, side dishes, and prepared foods for the supermarket, club store, and food service industries. Family owned and operated, Reser's has been a proud sponsor of good times at racetracks, picnics, BBQs, music festivals, and affordable family meals since 1950. Reser's family of brands include Reser's American Classics, Main St Bistro, Stonemill Kitchens, and more. With more than 4,500 employees, Reser's operates 14 facilities in the US, Mexico, and Canada and actively supports the communities it serves.

Here at Scotts Miracle-Gro there is no such thing as a typical day. Our culture is constantly energized by new and exciting growth opportunities and at a rapid pace. Below are details on an open job. If the role interests you and you would like to be considered we encourage you to apply! This hourly role follows the Scotts/Hawthorne step pay progression scale and typically starts at $23.25 per hour and is paid weekly. Scotts/Hawthorne will consider various factors in determining the actual pay including your skills, qualifications, experience, and geographical location. We are looking for a Machine Operator to join our Scotts Miracle Gro team in Independence, OR! 1st and 2nd Shift What you'll do in this role: Operate a computer controlled production system for multiple raw material ingredients that are processed in a mix room. Solve daily operations problems with limited supervision. Actively maintain good housekeeping standards in their assigned area Complete daily job checklists & equipment checks/calibrations to maintain quality. Maintain accurate records of raw materials, samples & equipment operations. Operate a forklift to transport materials. Set up machines at the beginning of shift to ensure proper working order. Perform testing procedures to ensure that machines work optimally during the production procedures. Maintain and clean machines before and after each shift. Feed information akin to speed, shapes and sizes through the machine set up box. Place parts in semi-automated machines. Calibrate machines at the beginning of each shift. Recalibrate machines at the end of each shift. Monitor machines during every procedure to ensure optimum running. Troubleshoot problems during machine operation. Ensure that regular and preventative maintenance procedures are carried out. Perform random tests to ensure accuracy. Perform safety checks on every machine. Ensure that machines are producing quality products by managing periodic checks on output. Ensure stocks of needed materials are ready and available at all times. What you'll need to be successful: High School diploma or equivalent. A minimum of one plus years of production plant experience is preferred. Able to identify all materials used, detail oriented, follow safe practices and procedures, ability to read English and or follow directions. Able to work in a dusty environment, hot/cold/ rainy weather, lift 50 pounds, and be able to climb ladders and work on their feet for the entire day. Willingness to work mandatory overtime including weekends and holidays. What we do for you (just to name a few cool ones): Medical, dental, vision, life insurance, holidays, vacation and sick time benefits available within a month of your start date Healthcare navigation, advocacy and support 401(k) company match up to 7.5% with immediate participation and vesting Ability to purchase company stock at a 15% discounted price from market value $600 annual wellness reimbursement program Up to $30,000 to help cover the cost of fertility treatments, adoption or surrogacy Up to 18 weeks of time away to support your growing family To view all of our great benefits, click here! * Eligibility for the above benefits may vary based on full-time/part-time status or additional factors. Not interested in this role? Stay up to date on future opportunities by joining our ScottsMiracle-Gro and Hawthorne Gardening talent communities. Scotts is an EEO Employer, dedicated to a culturally diverse, drug free workplace. EEO/AA Employer/Minority/Female/Disability/Veteran/Sexual Orientation/Gender Identity Notification to Agencies: Please note that the Scotts Miracle-Gro company does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Master Service Agreement, and specific approval to submit resumes to an approved requisition, the Scotts Miracle-Gro company will not consider or approve payment regarding recruiter fees or referral compensations.

Here at Scotts Miracle-Gro there is no such thing as a typical day. Our culture is constantly energized by new and exciting growth opportunities and at a rapid pace. Below are details on an open job. If the role interests you and you would like to be considered we encourage you to apply! This hourly role follows the Scotts/Hawthorne step pay progression scale and typically starts at $23.25 per hour and is paid weekly. Scotts/Hawthorne will consider various factors in determining the actual pay including your skills, qualifications, experience, and geographical location. We are looking for a Machine Operator to join our Scotts Miracle Gro team in Independence, OR! 1st and 2nd Shift What you'll do in this role: * Operate a computer controlled production system for multiple raw material ingredients that are processed in a mix room. * Solve daily operations problems with limited supervision. * Actively maintain good housekeeping standards in their assigned area * Complete daily job checklists & equipment checks/calibrations to maintain quality. * Maintain accurate records of raw materials, samples & equipment operations. * Operate a forklift to transport materials. * Set up machines at the beginning of shift to ensure proper working order. * Perform testing procedures to ensure that machines work optimally during the production procedures. * Maintain and clean machines before and after each shift. * Feed information akin to speed, shapes and sizes through the machine set up box. * Place parts in semi-automated machines. * Calibrate machines at the beginning of each shift. * Recalibrate machines at the end of each shift. * Monitor machines during every procedure to ensure optimum running. * Troubleshoot problems during machine operation. * Ensure that regular and preventative maintenance procedures are carried out. * Perform random tests to ensure accuracy. * Perform safety checks on every machine. * Ensure that machines are producing quality products by managing periodic checks on output. * Ensure stocks of needed materials are ready and available at all times. What you'll need to be successful: * High School diploma or equivalent. * A minimum of one plus years of production plant experience is preferred. * Able to identify all materials used, detail oriented, follow safe practices and procedures, ability to read English and or follow directions. * Able to work in a dusty environment, hot/cold/ rainy weather, lift 50 pounds, and be able to climb ladders and work on their feet for the entire day. * Willingness to work mandatory overtime including weekends and holidays. What we do for you (just to name a few cool ones): * Medical, dental, vision, life insurance, holidays, vacation and sick time benefits available within a month of your start date * Healthcare navigation, advocacy and support * 401(k) company match up to 7.5% with immediate participation and vesting * Ability to purchase company stock at a 15% discounted price from market value * $600 annual wellness reimbursement program * Up to $30,000 to help cover the cost of fertility treatments, adoption or surrogacy * Up to 18 weeks of time away to support your growing family * To view all of our great benefits, click here! * Eligibility for the above benefits may vary based on full-time/part-time status or additional factors. Not interested in this role? Stay up to date on future opportunities by joining our ScottsMiracle-Gro and Hawthorne Gardening talent communities. Scotts is an EEO Employer, dedicated to a culturally diverse, drug free workplace. EEO/AA Employer/Minority/Female/Disability/Veteran/Sexual Orientation/Gender Identity Notification to Agencies: Please note that the Scotts Miracle-Gro company does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Master Service Agreement, and specific approval to submit resumes to an approved requisition, the Scotts Miracle-Gro company will not consider or approve payment regarding recruiter fees or referral compensations.

The Machine Operator is responsible for setting up and operating a variety of presses up to 75-ton capacity, manual lathes, and other equipment to produce deep draw formed products according to specifications. **Responsibilities** + Set up and operate a variety of presses up to 75-ton capacity. + Operate manual lathes and other equipment for deep draw forming. + Read schematics and drawings accurately. + Use tape measures and precision measuring hand tools to verify conformance of parts to specifications. + Operate press shop equipment, including specialized manual lathes, air, pedestal, and centerless grinders, and belt and disc sanders. + Utilize forklifts and wood saws for production processes. + Set up and operate Level B press shop equipment, including hydraulic presses up to 75 tons, parts washers, vibratory machines, and other cleaning equipment. + Operate foot shears, both manual and air. + Identify defects visually and ensure quality standards are met. + Assemble and build wood shipping containers. + Maintain a clean and safe work area. + Perform other duties as assigned. **Essential Skills** + Experience with machine operation and general production. + Proficiency in reading blueprints and schematics. + Ability to use a tape measure accurately. + Experience with press brake operations. + Capable of lifting up to 50 lbs. **Additional Skills & Qualifications** + Previous lead or supervisor experience for higher pay eligibility. + Strong soft skills and ability to work collaboratively with team members. + Forklift operation experience. **Why Work Here?** This is a long-term opportunity with the potential to earn a lead role. You will receive training in specialized methods and processes, ensuring personal and professional growth within a supportive team environment. **Work Environment** The work environment involves operating a variety of machinery and equipment, including hydraulic presses, grinders, and forklifts. Employees are expected to maintain a clean workspace, follow safety protocols, and collaborate with team members. The role includes manual labor and requires lifting up to 50 lbs. **Job Type & Location** This is a Contract to Hire position based out of Albany, OR. **Pay and Benefits** The pay range for this position is $18.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Albany,OR. **Application Deadline** This position is anticipated to close on Dec 5, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.