Operator jobs in Daphne, AL - 250 jobs

Local chemical facility (Theodore, AL) is looking for a full-time Machine/Packaging Operator MUST HAVE VALID DRIVER'S LICENSE. THESE ARE ROTATING (12Hr) SHIFT POSITIONS Pay Range: $21.91 - $26.26 Activities would include: * Minimum 1-3 years industrial experience * Operate heavy equipment including: extensive forklift experience a MUST * Experience in loading/unloading and packaging of product * Work around rotating/moving equipment while packaging * Manually handles various materials. * Regularly work at heights including off the top of ladders and the top of railcars and bulk truck trailers. * Routinely climb ladders and stairs to perform various tasks. * Familiarity with Lock Out/Tag Out procedures * Be able to respond quickly to identify and correct quality issues. * Be able to maneuver and work in confined spaces to clean out and prep equipment and perform basic maintenance functions. Physical Requirements: Strength: Standing 55% Walking 20% Sitting 25% Lifting Up to 50 Lb. Carrying Up to 50 lb. Pushing F Pulling F Agility: Climbing FBalancing F Movement/Positioning: Stooping FKneeling FCrouching F Crawling OReaching FHandling C Operating Equipment/Driving Vehicles: Yes EXPLANATION OF SYMBOLS NP Not Present C Constantly (67-100%) F Frequently (34-66%) O Occasionally (0-33%)

This is lead work in operating a wastewater or water treatment plant and allied appurtenances while on an assigned shift. JurisdictionsYearly SalaryMobile Area Water and Sewer System$49,295 - $78,805Prichard Water Works and Sewer Board$43,569 - $69,652Saraland Water and Sewer Board$51,790 - $82,795Utilities Board City of Bayou La Batre$44,658 - $71,394 Note: The eligible list created from this job posting will be utilized to fill Treatment Plant Operator II positions specifically in the area of WASTEWATER treatment.Minimum Qualification Requirements Graduation from a standard senior high school, or the successful completion of the General Educational Development (GED) test, and a minimum of one year experience at the level of a Treatment Plant Operator I or Pretreatment Specialist I; or a combination of education and experience equivalent to these requirements. Special Requirement Must be certified in water or wastewater treatment by the Alabama Department of Environmental Management (ADEM). Out-of-state certifications may be accepted, but ADEM certification must be completed within 6 months of employment. Mobile and Saraland - possession of a Grade III Certificate in Water or Wastewater Treatment, preferably both, except for assignment to the Stickney Filtration Plant (Moffat Road) and the Myers Filtration Plant (Hubert Pierce Road which requires a Grade IV Water Certificate. Prichard-possession of a Grade II Certificate in Water Treatment OR possession of a Grade III or IV Wastewater Certificate. Bayou La Batre - possession of a Grade II Certificate in Water Treatment or Grade III Certificate in Wastewater Treatment. Other smaller jurisdictions require possession of a Grade II Certification in Water or Wastewater Treatment or both. Must possess a valid driver's license from state of residence. For details, please see Class Specifications | TREATMENT PLANT OPERATOR II | Class Spec DetailsAll applications should be submitted online through the Mobile Civil Service Job Opportunities page. Accuracy and truthfulness are of primary importance for Civil Service System employment, and all applications are reviewed with this in mind. Please note that this job posting will close once 275 applications have been received. Eligibles selected for appointment must meet the established medical and physical standards for the class of work. The medical examination must be by one of the physicians designated by the Personnel Board. Appointees must bear the cost of the examination. A person with a disability may request accommodation by contacting the Mobile Civil Service at ************. Adam Bourne, Civil Service Director The agencies we serve are equal opportunity employers

Job DescriptionDescription: Operate heavy equipment such as roll off trucks, semi-trucks, front-end loaders, skid steers, cranes, excavators, forklifts, reach stackers, bulldozers, and haul trucks in an industrial mill environment. Transport and handle slag, scrap metal, raw materials, and by-products in and around the mill. Perform routine equipment inspections and report maintenance or safety issues. Safely load, unload, and transport materials to designated areas as directed by supervisors. Monitor equipment operation and troubleshoot issues to avoid downtime or unsafe conditions. Maintain a clean and organized work area, including routine cleanup and material handling. Follow all company and site-specific safety policies, procedures, and practices. Assist with general labor tasks as needed. Communicate effectively with team members and supervisors to coordinate job tasks and priorities. Use of personal protective equipment (PPE) is mandatory. Exposure to dust, heat, cold, noise, and moving equipment in a mill or industrial plant environment. Requirements: Strong knowledge of safe equipment operation and job site safety standards. Ability to perform physically demanding tasks, including lifting, climbing, and working in extreme weather conditions. Familiarity with the functions and routine maintenance of various types of heavy equipment. Team player with a strong work ethic and a commitment to safety and productivity. Ability to work flexible hours, including nights, weekends, or holidays as required. Valid driver's license required; CDL a plus.

Make a +Difference at Kraton! At Kraton, we make a Positive Difference, and we are looking for individuals who are also looking to make a difference in their jobs, for our customers and to the world. We are looking to hire a key member of our Operations team at our Pensacola, Florida location. Key Responsibilities The key responsibilities for this position include but are not limited to the following: * Safely operate resin flake packaging equipment including general maintenance (e.g. inspection, cleaning, lubricating) * Shipping and receiving of raw and processed goods on tanker trucks and trailers. * Complete appropriate documentation for shipping and receiving. * Perform housekeeping activities to manage combustible dust hazards. * Perform general industrial tasks as needed (e.g. painting, labelling, cleaning, etc.) * Complete required safety training and maintain job qualifications. Required Skills * Good verbal and written communication skills. * Good attention to detail. * Ability to effectively work on shift teams. * Ability to work with limited supervision - shows initiative. * Ability to adapt to changing conditions and take appropriate action. * Computer skills including Microsoft Office. * Utilizes critical thinking, problem solving and troubleshooting. * Demonstrated mechanical ability preferred. Education, Certifications & Licenses * High School Diploma or Equivalent * Chemical Operator certificate or degree is preferred. * 1-3 years experience in chemical manufacturing preferred. * Forklift experience preferred. * ------------------------------------------------- The statements above are intended to describe the general nature and level of work performed by employees assigned to this classification. Statements are not intended to be construed as an exhaustive list of all duties, responsibilities and skills required for this position. Kraton's internal talent acquisition team manages our recruiting efforts and from time to time works with pre-selected/pre-approved external staffing agencies. We do NOT accept unsolicited resumes or candidate referrals from recruiters and/or agencies who are not pre-selected/pre-approved. Kraton is proud to be an Equal Opportunity Employer.

Job Title: Heavy Equipment Operator Utility Job Type: Full-Time, 50 hour work week, 10 hour shifts - 5 days per week Salary: $22 - $28 per hour Benefits: * Health, dental, and vision insurance * Paid Time Off & Paid Holidays * Matching 401k * Opportunities for professional development and advancement About Us: Ammons & Blackmon Construction, LLC. is a leading civil construction company committed to excellence in infrastructure development, road construction, and site preparation. We are proud to have served the Baldwin/Mobile areas as a family-owned business for over 40 years. Our team is dedicated to delivering high-quality projects that enhance communities and improve the lives of residents. We are seeking a skilled Heavy Equipment Operator to join our dynamic team. Job Summary: The Utility Heavy Equipment Operator will be responsible for operating various types of heavy machinery to assist in the construction and maintenance of infrastructure projects. This role requires expertise in operating equipment such as bulldozers, excavators, loaders, along with a strong focus on safety, efficiency, and quality. Key Responsibilities: * Operate heavy equipment including bulldozers, excavators, loaders, and graders to perform construction tasks such as excavation, grading, and site preparation. * Conduct pre-operational checks and regular maintenance on equipment to ensure optimal functionality and safety. * Interpret project plans and blueprints to execute tasks according to specifications and requirements. * Communicate effectively with supervisors, project managers, and other team members to coordinate work activities and ensure project timelines are met. * Follow all safety protocols and regulations to maintain a safe work environment. * Perform manual labor tasks as needed, including lifting, carrying, and moving materials. * Troubleshoot and report any mechanical issues with equipment to the maintenance team. * Maintain accurate logs and records of equipment usage and maintenance activities. * Assist in training and mentoring junior operators or laborers. Requirements: * Proven experience as a Utility Heavy Equipment Operator in the civil construction industry. * Thorough knowledge of construction site safety practices and procedures. * Ability to read and interpret construction plans and blueprints. * Strong mechanical aptitude and troubleshooting skills. * Excellent communication and teamwork abilities. * Physical stamina and the ability to work in various weather conditions. Ammons & Blackmon Construction, LLC. does not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, sexual orientation, gender identity, marital status, pregnancy, genetic information, or any other characteristic protected by law. It is our intention that all qualified applicants are given equal opportunity and that employment decisions be based on job-related factors Equal Opportunity Employer, including disabled and veterans. View Company Information To see other positions, click here.

This is your chance to make your mark. Making sure our customers have access to the world's most robust network all while delivering best-in-class service. Your role is key in installing and maintaining our state-of-the-art technology. And you'll get the satisfaction of knowing that you are helping others and connecting our customers to what matters most to them every day. #connectourcustomers As a Machine Operator, you'll work independently in the field placing buried service wire using a manually controlled gasoline or diesel-powered tractor/trencher, plow, boring machine, or other manual tools. You'll coordinate work activities with customers, local utilities, and government agencies, providing installation, repairs, maintenance as well as reconnection of fiber and copper services all while following safety practices and delivering the highest levels of service. What you'll do: Locates buried facilities near the route of "B" service wire using appropriate equipment. Operate a company vehicle with trailer and machinery. Locate buried facilities near the route of buried wire using appropriate equipment. Manual excavation utilizing a shovel. Provide repairs to low voltage buried utilities or sprinkler systems. Provides temporary repairs to low voltage buried utilities, sprinkler systems, and sewage field lines damaged while performing other duties. Periodic maintenance and non-complex repairs to equipment used in the performance of other responsibilities. Reads and interprets simple instructions. Follow established safety practices and procedures including the manufacturer's specifications for operation or use of equipment. What you'll need: Desire to work Monday through Friday with a shift length of 8hrs. Ability to work mandatory overtime and holidays as service conditions require. Eager to work outside in all kinds of weather conditions. Able to utilize various types of machines and tools. Lift and move objects up to 120 pounds. Use computers including hand-held devices to update work status and check new assignments. Light commercial driver's license or equivalent required, depending on state law and be able to drive manual shift in some assignments. Attain and maintain a DOT medical card. Complete on-the-job and/or classroom training as required. Demonstrate competency in the training requirements during probationary period to satisfy qualification achievement. Previous operating experience with similar equipment is desirable. Perform the above job duties with or without "reasonable accommodation.” May be required to go out of region/state due to workload and emergency work. Interested? We provide extensive training and the resources you need in a collaborative and dynamic team environment, built for your success. You'll have the opportunity to continue to learn and grow with ongoing paid training, leading you to exciting career paths. Our Machine Operators earn between $442 - $1,094 weekly. With our amazing salary opportunities, our average starting salary begins at $51,064.00 per year. Not to mention all the other amazing rewards that working at AT&T offers. From health insurance to tuition reimbursement and paid time off to discounts on products and services just to name a few. There is a lot to be excited about around here. Individual starting salary within this range may depend on geography, experience, expertise, and education/training. Joining our team comes with amazing perks and benefits: Medical/Dental/Vision coverage 401(k) plan Tuition reimbursement program Paid Time off and holidays (With some exceptions bargained employees qualify for one week of PTO after 6 months of service and 2 weeks after the first year). At least 6 company designated holidays and additional PTO (based on bargaining group to which you are hired. Sick leave Paid Parental Leave Adoption Reimbursement Disability Benefits (short term and long term) Life and Accidental Death Insurance Supplemental benefit programs: critical illness, accident hospital indemnity/group legal Employee Assistance Programs (EAP) Employee discounts up to 50% off on eligible AT&T mobility plans and accessories, AT&T internet (and fiber where available) and AT&T phone Ready to take your career on the road to success? Apply today! Weekly Hours: 40 Time Type: Regular Location: Daphne, Alabama It is the policy of AT&T to provide equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law. In addition, AT&T will provide reasonable accommodations for qualified individuals with disabilities. AT&T is a fair chance employer and does not initiate a background check until an offer is made.

Full-time Description Concrete Pump Partners (CPP) is a regional concrete pumping company with its headquarters in Nashville, TN. We also have locations in Chattanooga TN, Knoxville TN, Louisville KY, Bowling Green KY, Atlanta GA, Huntsville AL, Birmingham AL, Phenix City AL, Loxley, AL, Denver CO, and Colorado Springs CO. If interested, please also apply at: **************************************************************************************************** Job Summary A Concrete Pump Operator is a skilled machine operator typically working on construction job sites. A pump operator typically goes to one or even two different job sites per day. Duties include controlling the operation of the pump and the output of concrete by directing the boom. They are also responsible for getting the machine to and from the job site and making sure the pump is ready for the next job. Responsibilities Drive the pump in a safe and conscientious manner to the job site and back to the yard. Operate the pump in a safe and conscientious manner, set up system, and clean out the pump after the job. Light repair of pumps: Some maintenance is required. Know the pump well enough to recognize problems and report them. Customer relations: Represent the Company through efficient work and courteous service. Keep unit clean: Keep the pump and truck washed and free of concrete and grease. Keep system free of concrete. Yard: Return system after use to appropriate location in yard. Keep yard neat and orderly. Paperwork: Complete and submit pump inspection forms, job ticket and maintenance forms. Keep an accurate timecard of time worked. Routine maintenance of greasing fittings & greaser, changing gaskets & checking fluid levels. Education and Experience High School Diploma or GED, or equivalent work experience Six to 12 months experience or equivalent work conditions preferred. CDL DOT Medical Examiners' Certificate Ability to pass a Functional Capacity Exam (FCE) Knowledge Familiarity with construction safety work rules. Customer service mindset Familiarity with concrete industry a plus Skills Experience in a fast-paced, changing/growing organization. Ability to self-manage priorities and deliverables. Flexible in responding to changing demands, goals, timelines, and priorities Strong interpersonal and communication skills with the ability to present ideas clearly. Physical Demands Must be able to meet DOT requirements for hearing and seeing. Must be able to verbally communicate to others. Good manual dexterity to climb on and around the pump in all weather conditions common to the area of the country. Must be able to lift up to 75 pounds to overhead position. Must be able to push and pull up to 50 pounds. Must have the balance and dexterity to maneuver around a construction site, and must enjoy working outdoors in all weather conditions. Must be drug and alcohol free. Standing 20% of time Frequently required for an 8-14 hour shift Walking 20% of time Frequently required for an 8-14 hour shift Sitting 60% of time Frequently required for an 8-14 hour shift Lifting 50 LBS Occasionally lifts and/or moves 50 lbs Carrying 50 LBS Occasionally lifts and/or moves 50 lbs Pushing 50 LBS Occasionally moves up to 50 pounds Pulling 50 LBS Occasionally moves up to 50 pounds Climbing Must be able to handle heights and carry up to 50 lbs up stairs/ladder Bending/Stooping Frequently stoops to pick up material Kneeling Frequently kneels to pick up material Crouching Frequently crouches to pick up material Crawling Rarely Crawls inside drum to chip, confined spaces Reaching Frequent reaching, sometimes above head, requiring repetitive motions during an 8-14 hour shift Handling Grips, grasps, twist, handle and operate objects, tools and controls using hands and wrists requiring repetitive motions during an 8-14 hour shift Speaking Must be able to speak clearly and at an audible level Hearing Must be able to pass hearing test on DOT physical Seeing Must be able to pass sight test on DOT physical Depth perception Must be able to pass sight test on DOT physical Working Conditions and Additional Requirements This job operates in a shop environment and on construction sites. Hours fluctuate based on demands of business. Travel to other shops within the company and job sites may be required. The noise level in the work environment can be loud. This position routinely requires use of company vehicles on company business. Individuals must be physically capable of operating the vehicles safely, possess a valid driver's license and maintain an acceptable driving record. Employees in this position will be subject to pre-employment and random Motor Vehicle Record and alcohol and drug testing as a condition of continued employment. Regularly works while standing, climbing, and bending in outside weather conditions and is regularly exposed to extreme cold and extreme heat. Works near moving mechanical parts and is exposed to wet and/or humid conditions, fumes, controlled chemical odors or airborne particles, with risk of vibration and possible exposure to cement (which could cause skin irritation). The noise level is moderate, but can fluctuate. Personal protective equipment required for daily use: safety glasses, hard hat, ear plugs, work boots, and gloves. Note This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. If interested, please also apply at: **************************************************************************************************** Salary Description Starting Rate: $25.00/hr

Job Description Thompson Engineering is looking for a highly motivated and skilled Cone Penetrometer (CPT) Rig Operator to join our dynamic geotechnical drilling team. We're seeking an experienced operator to safely and efficiently run our CPT rigs, collecting high-quality geotechnical data across diverse subsurface conditions. This role demands a strong grasp of CPT principles, mechanical expertise, meticulous attention to detail, and an unwavering commitment to safety. Key Responsibilities As a CPT Rig Operator, you will: Rig Operations: Safely mobilize, set up, operate, and demobilize CPT rigs at various project sites. Data Acquisition: Conduct CPT soundings per project specifications and industry standards, ensuring precise collection of tip resistance (qc), sleeve friction (fs), and pore water pressure (u2) data. Equipment Maintenance: Perform routine maintenance, proactive troubleshooting, and minor repairs to CPT rigs and associated equipment (e.g., cones, rods, hydraulic systems). Calibration: Assist with or execute regular calibration checks of CPT cones and data acquisition systems to guarantee data accuracy. Safety Compliance: Strictly adhere to all company safety policies, procedures, and OSHA regulations. Conduct daily safety checks, actively participate in tailgate safety meetings, and promptly report any hazards or incidents. Documentation: Accurately complete daily field logs, sounding reports, maintenance records, and all other required documentation. Site Management: Maintain a clean, organized, and environmentally compliant work area. Collaboration: Work effectively with project managers, geotechnical engineers, field technicians, and other team members to achieve project goals. Troubleshooting: Identify and resolve operational issues or data anomalies during CPT sounding. Mobility: Be prepared for frequent travel to various job sites, including remote locations and challenging terrains, potentially involving extended periods away from home. Qualifications Education Required: High School Diploma or GED. Preferred: Technical schooling or vocational training in heavy equipment operation, mechanics, or a related field. A Plus: Degree in Geology or a related field with a concentration in soils. Experience Required: Minimum of 2-3 years of experience operating heavy equipment, preferably within the geotechnical, drilling, or construction industry. Highly Preferred: Prior experience specifically operating CPT rigs. A Plus: Familiarity with various CPT cone types (e.g., standard, piezocone, seismic cone). Technical Skills Proficient in reading and interpreting project plans, specifications, and safety guidelines. Basic mechanical aptitude for troubleshooting and maintenance of equipment. Familiarity with data logging software and basic computer skills for data transfer. Certifications/Licenses Required: Valid Driver's License with a clean driving record. Preferred/Required (depending on rig size): CDL (Class A or B). Highly Desirable: OSHA 10-hour or 30-hour Construction Safety certification. A Plus: First Aid/CPR certification. Physical Requirements Ability to lift and carry heavy objects (up to 50 lbs.) regularly. Ability to stand, walk, bend, stoop, and kneel for extended periods. Ability to work outdoors in various weather conditions (heat, cold, rain, etc.). Good vision and hearing, with or without correction, to safely and effectively operate equipment. Soft Skills Exceptional attention to detail and accuracy. Strong problem-solving abilities. Reliable, punctual, and highly self-motivated. Excellent written and verbal communication skills. Ability to work both independently and collaboratively within a team. Unwavering commitment to safety. Benefits Competitive salary Health Dental Vision 401(k) with company match Paid Time Off Training and development opportunities.

As a Plant Operator, your primary responsibility will be to treat wastewater, determine water quality, and release treated water to city publicly owned treatment works. The Wastewater Plant Operator plays a significant role in maintaining the safety and health of the environment. Schedule: 5am to 6pm availability required (8 hour days within that time frame is typical) Compensation: Wages starting at $20/hr ( no prior industry experience required !) Location: 1980 Avenue A, Mobile, AL 36615, USA Essential Functions Responsible for mixing the wastewater chemicals and adding to them as needed. Manages the space for incoming wastewater and treatment of the material. Performs cleanup of the area as required. Checks tank levels for necessary space for material processing. Follows all safety and compliance rules and regulations. Wears and properly uses safety equipment at all times. Always works in a safe and compliant manner. Operates and maintains shop equipment. May perform preventative maintenance on all equipment. Operates heavy equipment, including forklift truck and skid steer. May perform minor electrical maintenance functions. Cleans and maintains process equipment. Perform all other duties as assigned. Knowledge and Skills · The ability to learn procedures related to the safe handling of materials. · Committed to growth in a company. · Collaborative with team members. · Good eye-hand coordination. · Organizational ability. · Reliable transportation. · The ability to be cross-trained to perform other jobs as needed. · Ability to communicate with others for safety and efficiency requirements Education and Experience High school diploma or equivalent (Required). One (1) year of experience as a Plant Operator with the maintenance of water pumps and plant machinery (Preferred). Working Environment: · Lifting, climbing, and bending · Must be able to work on feet most of the workday · Varied weather working in hot, cold, and wet conditions · Strong odors and smells This job description in no way states of implies these are the only duties to be performed by the employee incumbent in the position. Employees will be required to follow any other legal or ethical job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. This document does not create an employment contract, implied or otherwise. Liquid Environmental Solutions has an “at will” relationship with team members.

Job DescriptionSalary: $20 - $28 Who We Are: Thomas Carroll LLC is a leading name in civil construction across Mississippi and Alabama States. Known for our precision, reliability, and commitment to excellence, we provide high-quality solutions across various infrastructure projects. Our team is driven by experience, but powered by innovation and dedicated to delivering high-quality projects. We are seeking skilled Heavy Equipment Operator to join our team. Job Overview: The Heavy Equipment Operator will be operating various types of heavy machinery to assist in construction and maintenance of projects. This role demands expertise in operating equipment such as excavators, dozers, loaders, motor grader and other site-specific machinery, alongside focusing on efficiency and quality. Key Responsibilities: - Operate heavy equipment including excavators , dozers ,loaders, motor grader to follow through with construction task like site preparation, grading & excavation - Assist in road building, land clearing, storm drainage, water & sewer utilities - Perform routine pre-operational inspections and basic maintenance on equipment to ensure safety and functionality - Follow project plans, grade stakes, and supervisor instructions with attention to accuracy - Communicate with supervisors and other team members to organize and manage work activities to ensure everything gets done on a project timeline - Maintain jobsite safety standards and communicate hazards or issues to leadership - Report any mechanical issues with equipment - Adapt to a variety of jobsite environments and tasks as needed Requirements: - Proven prior experience ( minimum 5 years) operating heavy construction equipment - Ability to read and interpret construction plans & blueprints - Experience with GPS machine control - Excavator experience laying pipe is a plus - Finish grading with dozer is a plus - Experience with GPS machine control is a plus - Willingness to learn and be trained in company-specific operational standards - Strong work ethic and reliability, excellent communication and troubleshooting skills - Ability to follow instructions and work as part of a crew - Good physical condition and stamina for outdoor, labor-intensive work - Valid drivers license Benefits: - Weekly Pay Cycle - Overtime Potential - Health Insurance - 401 K - Paid Time Off (Vacation, Holidays) - Safety Equipment Provided (Hardhats, safety equipment) - Career Development Opportunities Learn directly from industry veterans - Tech Package available for select roles Schedule: - Full-Time - Monday to Friday (Every other Saturday or as needed based on project demand) - Overtime - Rotating weekends - Weekends as needed

Job DescriptionDescription: Atlas Industrial Outsourcing is looking for Class A & Class B CDL Operators to join their safety conscious team! The CDL Operator is responsible for the safe and proper execution of jobs across all services lines. Supervises and completes single task jobs requiring one crew and completes turnarounds with management oversight at client's site in accordance with client and business requirements and company policies, practices, and procedures. Transitioning Military, this is a great opportunity to leverage your skills and training as you return to civilian life. Key Responsibilities: Act as safety representative responsible for safety policies and procedures of both the company and the customer, including hands-on information regarding operations, safety, equipment, emergency response and administrative functions. Hands-on operation vacuum equipment and hydro-blasting equipment. Operation of special equipment, such as Ultra High-Pressure pumps. Operate equipment by energizing the pumping equipment and/or any specialized hydro-blasting and/or chemical cleaning equipment, vacuum trucks and cutting equipment being used on the job. May be required to examine surface cleaned to ensure conformance to company and customer specifications. Perform routine maintenance on company equipment being used on the job. Perform any and all duties associated with liquid vacs, air machines and jet rodders. May direct a crew of vacuum technicians. May transport equipment and personnel to and from customer locations. Completes pre and post trip inspections, driver's logs and complies with all other vehicle policy and DOT requirements. Loading and unloading hoses. Unload vacuum truck at the dump site. Provide general maintenance in the field. Perform other related duties as assigned. Requirements: Required Qualifications: Specific vocational preparation including classroom safety training, on-the-job training and essential experience gained on other jobs. Language proficiency: understand English at a level to comprehend safety training and respond to instructions in emergency situations. Valid driver's license, CDL Class A or B and other requirements of company's driving policy required when driving company vehicle or using personal vehicle on company business. Smartphone required for Electronic Logging Device. Federal Transportation Workers Identification Credential (TWIC) may be required. Must be knowledgeable in the operation of emergency equipment, such as fire extinguishers. Experience operating a vacuum truck. Working knowledge of operating equipment used in wet and dry vacuums. What does it take to work in this position? High school diploma/GED or equivalent experience. Class A or Class B CDL License required. HAZMAT and Tanker Endorsements, preferred. The ability to travel 100% of the time; sometimes for extended periods of time. Compensation: $23-$30 per hour, DOE Paid per diem Paid hotels Travel pay Paid training Essential Care Plan offering Medical, Dental, Vision, and Life Atlas Industrial Outsourcing is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Atlas Industrial Outsourcing is a Military & Veteran friendly company.

Join Ferrovial: Where Innovation Meets Opportunity Are you ready to elevate your career with a global leader in infrastructure solving complex problems and generating a positive outcome on people's lives? At Ferrovial, we are not just a company; we are a community of innovators and trailblazers. Listed on three major stock markets: Nasdaq (US), Euronext Amsterdam (Netherlands) and IBEX 35 (Spain), we are also member of the Dow Jones Sustainability Index and FTSE4Good. We operate in more than 15 countries and have a workforce of over 24,000 professionals worldwide., including Highways, Airports, Construction, and Energy. Founded in 1963, Webber, part of Ferrovial Construction, is a leading construction company that specializes in heavy civil, waterworks, energy and infrastructure management and is dedicated to safely providing intelligent solutions to its clients and community. Webber is headquartered in Houston, Texas, with offices and projects in the United States and Canada. Webber supports a wide range of project models to meet client needs, including traditional design bid build, design build, alternative delivery models and public private partnership (P3) solutions. Webber also has an in-house engineering services department to help optimize building efficiency and quality while solving complex project challenges using field experience, innovative construction methods and BIM technology. As a subsidiary of Ferrovial, Webber has access to a global network of skilled engineers, best-in-class technology and vast resources. Why Ferrovial? * Global presence, local impact: Be part of a company that is shaping the future of infrastructure worldwide, with challenging roles and projects that make a real difference. * Collaborative excellence: Work alongside talented professionals in a collaborative environment where your ideas and contributions are valued. * Inclusive Culture: Thrive in an innovative and respectful workplace that values every voice, celebrates what makes us unique and turns differences into innovation. * Career growth: Benefit from global and cross-business unit mobility, with development processes designed to ensure your professional growth. * Compelling benefits and employee wellbeing: Enjoy a comprehensive benefits package that rewards your hard work and dedication and take advantage of initiatives designed to support your physical and psychological health. * Productivity tools: Utilize cutting-edge tools like Microsoft Copilot to enhance your productivity and efficiency. Job Description: GENERAL PURPOSE OF JOB Operates a crawler or rubber-tired machine mounted with an excavator bucket. Used for excavating ditches, structures and mass excavations, laying pipe and precast concrete structures, loading trucks and placing rock riprap. May also be equipped with various hydraulic attachments. ESSENTIAL DUTIES AND RESPONSIBILITIES * Start engines, move throttles, switches, and levers, and depress pedals to operate machines. * Signal truck driver to position truck to facilitate loading of dirt, rocks, and other materials. * Take actions to avoid potential hazards and obstructions such as utility lines, other equipment, other workers, and falling objects. * May oil, grease, or otherwise service the machine. * Make necessary adjustment to equipment as needed. OTHER DUTIES AND RESPONSIBILITIES * Comply with all safety policies, practices and procedures. Report all unsafe activities to supervisor and/or Human Resources. * Participate in proactive team efforts to achieve departmental and company goals. * Provide leadership to others through example and sharing of knowledge/skill. * Perform other duties as assigned. EDUCATION AND EXPERIENCE * Less than a High School Diploma and related construction experience WORKING CONDITIONS * Outdoors exposed to changing weather conditions (for instance, rain, sun, snow, wind, etc.) PHYSICAL ACTIVITY LEVEL * Heavy physical activity performing strenuous day activities of a primarily productive/technical nature. MANUAL DEXTERITY * Manual dexterity sufficient to reach/handle items and work with the fingers and perceives attributes of objects and materials. Seize the challenge. Move the world together! Innovative, creative, respectful, and diverse are some of the ways we describe ourselves. We are motivated by challenges, and we collaborate across our business units to move the world together. Your journey to a fulfilling career starts here! Ferrovial is an equal opportunity employer. We treat all jobs applications equally, regardless of gender, color, race, ethnicity, religion, national origin, age, disability, pregnancy, sexual orientation, gender identity and expression, covered veteran status or protected genetic information (each, a "Protected Class"), or any other protected class in accordance with applicable laws. #WeAreFerrovial

Join Ferrovial: Where Innovation Meets Opportunity Are you ready to elevate your career with a global leader in infrastructure solving complex problems and generating a positive outcome on people's lives? At Ferrovial, we are not just a company; we are a community of innovators and trailblazers. Listed on three major stock markets: Nasdaq (US), Euronext Amsterdam (Netherlands) and IBEX 35 (Spain), we are also member of the Dow Jones Sustainability Index and FTSE4Good. We operate in more than 15 countries and have a workforce of over 24,000 professionals worldwide., including Highways, Airports, Construction, and Energy. Founded in 1963, Webber, part of Ferrovial Construction, is a leading construction company that specializes in heavy civil, waterworks, energy and infrastructure management and is dedicated to safely providing intelligent solutions to its clients and community. Webber is headquartered in Houston, Texas, with offices and projects in the United States and Canada. Webber supports a wide range of project models to meet client needs, including traditional design bid build, design build, alternative delivery models and public private partnership (P3) solutions. Webber also has an in-house engineering services department to help optimize building efficiency and quality while solving complex project challenges using field experience, innovative construction methods and BIM technology. As a subsidiary of Ferrovial, Webber has access to a global network of skilled engineers, best-in-class technology and vast resources. Why Ferrovial? Global presence, local impact: Be part of a company that is shaping the future of infrastructure worldwide, with challenging roles and projects that make a real difference. Collaborative excellence: Work alongside talented professionals in a collaborative environment where your ideas and contributions are valued. Inclusive Culture: Thrive in an innovative and respectful workplace that values every voice, celebrates what makes us unique and turns differences into innovation. Career growth: Benefit from global and cross-business unit mobility, with development processes designed to ensure your professional growth. Compelling benefits and employee wellbeing: Enjoy a comprehensive benefits package that rewards your hard work and dedication and take advantage of initiatives designed to support your physical and psychological health. Productivity tools: Utilize cutting-edge tools like Microsoft Copilot to enhance your productivity and efficiency. Job Description: GENERAL PURPOSE OF JOB Operates a crawler or rubber-tired machine mounted with an excavator bucket. Used for excavating ditches, structures and mass excavations, laying pipe and precast concrete structures, loading trucks and placing rock riprap. May also be equipped with various hydraulic attachments. ESSENTIAL DUTIES AND RESPONSIBILITIES Start engines, move throttles, switches, and levers, and depress pedals to operate machines. Signal truck driver to position truck to facilitate loading of dirt, rocks, and other materials. Take actions to avoid potential hazards and obstructions such as utility lines, other equipment, other workers, and falling objects. May oil, grease, or otherwise service the machine. Make necessary adjustment to equipment as needed. OTHER DUTIES AND RESPONSIBILITIES Comply with all safety policies, practices and procedures. Report all unsafe activities to supervisor and/or Human Resources. Participate in proactive team efforts to achieve departmental and company goals. Provide leadership to others through example and sharing of knowledge/skill. Perform other duties as assigned. EDUCATION AND EXPERIENCE Less than a High School Diploma and related construction experience WORKING CONDITIONS Outdoors exposed to changing weather conditions (for instance, rain, sun, snow, wind, etc.) PHYSICAL ACTIVITY LEVEL Heavy physical activity performing strenuous day activities of a primarily productive/technical nature. MANUAL DEXTERITY Manual dexterity sufficient to reach/handle items and work with the fingers and perceives attributes of objects and materials. Seize the challenge. Move the world together! Innovative, creative, respectful, and diverse are some of the ways we describe ourselves. We are motivated by challenges, and we collaborate across our business units to move the world together. Your journey to a fulfilling career starts here! Ferrovial is an equal opportunity employer. We treat all jobs applications equally, regardless of gender, color, race, ethnicity, religion, national origin, age, disability, pregnancy, sexual orientation, gender identity and expression, covered veteran status or protected genetic information (each, a “Protected Class”), or any other protected class in accordance with applicable laws. #WeAreFerrovial

The Finishing Operator works in a high production rate environment processing polysilicon final product while exhibiting a high level of commitment to maintaining company safety and quality standards. Essential Duties/Responsibilities: · Work inside of clean room environment requiring don and doff of dedicated clean room garments 6 times per day as well as PPE for cut / puncture protection · Size, sort, visually inspect, & weigh to 11-lbs small, sharp, rock-like pieces for defects within different customer specifications · Maintain product and operating supply inventories · Operation of static & in-motion weigh scales and bag sealers · Organize and maintain inspection paperwork · Ensure product tracking and traceability of all lot data groups of baskets through the inspection process · Keep work area clean throughout the day and before leaving shift · Maintain electronic records of seed/bridge production, including lot numbers, quantities and seed lengths using MS excel and Label Station. · Frequent changes of plastic sheeting and gloves for product protection Additional Duties/Responsibilities: · Inspect baskets and carts for defects · Move emptied carts and baskets to upstream areas · Operate label station · Perform seed and cut rod inspections · Perform clean room maintenance and cleaning · Evaluate the logistics of material flow through process areas to ensure operational efficiency · Move 50-lb baskets of P-Si between carts for sorting and staging product · Work around moving parts · Additional duties as assigned Required Skills/Abilities: · Ability to learn and perform repair tasks on equipment · Exceptional attention to detail · Understanding of how to use calipers, a tape measure, rulers, etc. for measuring and checking finished work · Data entry and retrieval from MS office (Word and Excel) and the use of computer software including DCS, AspenTech, LabelStation · Ability to work weekends and holidays as needed · Proficiency in basic math such as addition, subtraction, multiplication, division, percentage, and average calculations · Ability to work with 2 other operators in a 10 x 10-ft area while twisting & maneuvering around carts and tables Requirements Education and Experience: High School Diploma or equivalent; further education and certifications such as Chemical Operator, AIDT, ISO 9001 and/or 14001 are preferred Physical Requirements: · Ability to stand for the majority of an 8-hour shift · Ability to stand at approximately 4-ft height inspection table · Push / pull and maneuver approximately 230-lb carts through crowded spaces · Bend to Lift up to 50 lbs. from below the waist to approximate 4-ft height while twisting · Lift and twist while holding 11-lb bags during course of shift (up to approximately 180 bags) · Ability to retrieve product from floor level and reach elevated surfaces during cleaning · Expect to manually handle approximately 2000-lbs per day as inspection operator and 14,000 lbs per day as a label station operator · Inspect, weigh, and seal approximately 25-lb cylindrical P-Si rods while standing · Inspect, weight, and seal seed products weighing approximately 10-lbs in bundles of 16

Summary/Objective A trainee with the Pensacola Blue Wahoos works in an organization and environment that is recognized as one of the best in minor league baseball. The Blue Wahoos hope to provide each trainee valuable work experience, and great preparation for a full-time position with the Blue Wahoos or other sports organizations. The position is seasonal, generally limited to a maximum of 30 hours per week and does not include benefits other than pay.Essential Duties and Responsibilities • Responsible for the maintenance of all equipment throughout the facility to help insure proper and safe operation of the facility on a daily basis. • Execute and manage in-stadium operations including cleaning, upkeep and general maintenance to ensure facility is in the best possible condition• Organize and manage service contracts the facility has with outside vendors on routine maintenance and preventative maintenance upkeep of the facility to ensure compliance with terms of contract. • Assist in preparation and management of the operations budget. • Manage, train and motivate the departmental employees.• Adequately schedule all part time staff during the season. • Purchase all materials required for the Operations Department • Responsible for OSHA compliance of systems and resources for facility. • Monitor in-stadium signage: ensure all signs are hanging properly, all flags are flying properly and not ripped or caught on barriers • Perform routine security checks of all suites, restrooms, and press box • Maintain the concourse games, inflatables and customer service booth throughout the year to ensure it is in the best possible shape for presentation • Other duties as assigned RequirementsKnowledge, Skills, and Abilities • High level of integrity • Strong analytical skills • Strong team work skills as well as the ability to work independently and self-motivate • Strong time management and organizational skills • Strong presentation skills • Ability to handle multiple tasks and prioritize goals • Excellent communication skills, both oral and written • Proficient with MS Office (Word and Excel) • Some experience with PowerPoint and Photoshop • Ability to organize, make and report cold calls • Ability to attend company events of all types • Ability to work in fast paced environment • Ability to work flexible hours, including evenings, weekends and holidays • Ability to pull tarp and other manual labor tasks Education and Experience Bachelor's degree or higher preferred and customer service experience Position Type/Expected Hours of Work This is a seasonal, part-time position. Days and hours will vary to include evening and weekend work according to business needs.Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The key physical requirements of this position include the ability to walk and stand for an extended period of time, lift up to 30 pounds, and the use of standard office equipment including computers. * In order to continue our mission of improving the lives of the people in the communities that we serve, priority in hiring interns and trainees will be given to those applicants who live in the area or attend school in the area of the position posting. * We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, sexual orientation, age, disability, gender identity, marital or veteran status, or any other protected class.

Borusan Berg Pipe is one of the leading manufacturers of large-diameter steel line pipe in North America. We are a mid-sized manufacturer with three U. S. locations specializing in pipe production for the oil and gas sector. We are seeking full-time Production Machine Support Operators for our Mobile, Alabama location. Learn more about Borusan Berg Pipe Compensation & Benefits $24.15 per hour Anniversary % rate increases at 1 year up to 8 years Shift differential % for evening shifts Weekly incentive % bonuses for meeting production and safety targets Premium pay when work offered on Sunday or holidays Company profit share Paid vacation, sick, and holidays Annual safety boot and safety prescription eyewear allowance Excellent health, dental, & vision coverage with a $0 company-paid health and dental option Company-paid Life and Disability benefit 401(K) retirement plan including $1 for $1 company match up to 5% of earnings Company-paid training & certification, tuition reimbursement, wellness program incentives, employee recognition bonuses, IDEA program bonuses, and more Primary Duties Operate roll lines to transport pipe Operate mechanical tools, equipment, and devices including: standard hand tools, disk grinders, torque wrench, measuring tape, micrometer, dial indicator, calipers, pallet jack, lifting devices, motorized forklift, MIG welder, oxy/ fuel cutting torch, chisel, milling tool, robotic stenciler, Die Stamp gun, come-a-longs, coating blast caps, overhead crane, Track Mobile, and dunnage handling Operate area equipment and control panels Maintain adequate supplies necessary to perform assigned tasks Monitor and ensure equipment and tools are operating properly Education & Work Experience High school diploma or equivalent (Required) Heavy industrial manufacturing experience (Preferred) Borusan Berg Pipe is an Equal Opportunity Employer and supports a drug-free workplace.

Borusan Berg Pipe is one of the leading manufacturers of large-diameter steel line pipe in North America. We are a mid-sized manufacturer with three U. S. locations specializing in pipe production for the oil and gas sector. We are seeking full-time Production Machine Support Operators for our Mobile, Alabama location. Learn more about Borusan Berg Pipe Compensation & Benefits $24.15 per hour Anniversary % rate increases at 1 year up to 8 years Shift differential % for evening shifts Weekly incentive % bonuses for meeting production and safety targets Premium pay when work offered on Sunday or holidays Company profit share Paid vacation, sick, and holidays Annual safety boot and safety prescription eyewear allowance Excellent health, dental, & vision coverage with a $0 company-paid health and dental option Company-paid Life and Disability benefit 401(K) retirement plan including $1 for $1 company match up to 5% of earnings Company-paid training & certification, tuition reimbursement, wellness program incentives, employee recognition bonuses, IDEA program bonuses, and more Primary Duties Operate roll lines to transport pipe Operate mechanical tools, equipment, and devices including: standard hand tools, disk grinders, torque wrench, measuring tape, micrometer, dial indicator, calipers, pallet jack, lifting devices, motorized forklift, MIG welder, oxy/ fuel cutting torch, chisel, milling tool, robotic stenciler, Die Stamp gun, come-a-longs, coating blast caps, overhead crane, Track Mobile, and dunnage handling Operate area equipment and control panels Maintain adequate supplies necessary to perform assigned tasks Monitor and ensure equipment and tools are operating properly Education & Work Experience High school diploma or equivalent (Required) Heavy industrial manufacturing experience (Preferred) Borusan Berg Pipe is an Equal Opportunity Employer and supports a drug-free workplace.

Borusan Berg Pipe is one of the leading manufacturers of large-diameter steel line pipe in North America. We are a mid-sized manufacturer with three U. S. locations specializing in pipe production for the oil and gas sector. We are seeking full-time Production Machine Support Operators for our Mobile, Alabama location. Learn more about Borusan Berg Pipe Compensation & Benefits * $24.15 per hour * Anniversary % rate increases at 1 year up to 8 years * Shift differential % for evening shifts * Weekly incentive % bonuses for meeting production and safety targets * Premium pay when work offered on Sunday or holidays * Company profit share * Paid vacation, sick, and holidays * Annual safety boot and safety prescription eyewear allowance * Excellent health, dental, & vision coverage with a $0 company-paid health and dental option * Company-paid Life and Disability benefit * 401(K) retirement plan including $1 for $1 company match up to 5% of earnings * Company-paid training & certification, tuition reimbursement, wellness program incentives, employee recognition bonuses, IDEA program bonuses, and more Primary Duties * Operate roll lines to transport pipe * Operate mechanical tools, equipment, and devices including: standard hand tools, disk grinders, torque wrench, measuring tape, micrometer, dial indicator, calipers, pallet jack, lifting devices, motorized forklift, MIG welder, oxy/ fuel cutting torch, chisel, milling tool, robotic stenciler, Die Stamp gun, come-a-longs, coating blast caps, overhead crane, Track Mobile, and dunnage handling * Operate area equipment and control panels * Maintain adequate supplies necessary to perform assigned tasks * Monitor and ensure equipment and tools are operating properly Education & Work Experience * High school diploma or equivalent (Required) * Heavy industrial manufacturing experience (Preferred) Borusan Berg Pipe is an Equal Opportunity Employer and supports a drug-free workplace.

Job DescriptionSalary: $27 We are currently accepting applications for local Heavy Equipment Operators for the Pensacola, FL, area This is a great opportunity to get hired on through a very well-known, respected company. EXPERIENCED DOZER, TRACKHOE & LONG REACH OPERATORS NEEDED MUST BE OSHA 10 CERTIFIED (we do provide the course) COMPETITIVE WAGES PAID WEEKLY BENEFITS OFFERED INCLUDE Health, Dental, Life and Vision Insurance PTO PAID VACATION FULL TIME TEMP TO HIRE Required skills and experience: 3 plus years' experience with heavy equipment operations. This positions main responsibility is operating excavation equipment. Preference will be given to those with other equipment operating experience, in: Compactor, Excavators, Dozer, Long Reach etc. Essential Functions Operate heavy equipment on rough grade work and grade to specifications in and around jobsite. May operate/maintain off road trucks to facilitate hauling, delivery and/or relocation of materials such as sand, gravel and crushed rock. Strong attention to detail and ability to keep excavator/equipment clean and in operating order. Perform Multi-Functions when not operating equipment. Competencies: Ability to follow OSHA safety guidelines as well as those set forth by company policy. Ability to follow instructions of supervisor in order to adhere to job specs, company policies and safety guidelines. Dependable, reliable, fulfilling responsibilities, working independently and as a team striving for excellence with a strong work ethic. Conduct and behavior exemplifying company and industry standards. Required job knowledge, skills and abilities will be discussed at the time of interview. We provide a drug-free workplace to protect the health and safety of our employees and patrons. Employment is contingent upon successfully passing a pre-employment drug screen.