Top Operator Skills

Below we've compiled a list of the most important skills for an Operator. We ranked the top skills based on the percentage of Operator resumes they appeared on. For example, 11.8% of Operator resumes contained Safety Procedures as a skill. Let's find out what skills an Operator actually needs in order to be successful in the workplace.

The six most common skills found on Operator resumes in 2020. Read below to see the full list.

1. Safety Procedures

high Demand
Here's how Safety Procedures is used in Operator jobs:
  • Assisted patrons entering and exiting rides, monitored activities to ensure adherence to safety procedures, shut-down and emergency evacuation procedures.
  • Direct the operation of all equipment associated with jet sewer cleaning equipment in accordance with relevant safety procedures.
  • Participated in company meetings and assisted with training newly hired associates with machine operations and safety procedures.
  • Developed skills in instrument operation, safety procedures, construction mobilization, and blue print interpretation.
  • Encouraged and practiced safety procedures and good security methods when responding to emergency gas leaks.
  • Followed food and safety procedures according to company policies and health and sanitation regulations.
  • Follow established safety procedures and supported maintenance activities as directed by the operations lead.
  • Trained 15 naval personnel on watercraft safety procedures and man overboard extraction procedures.
  • Packaged Perishables in timely manor to ensure food safety procedures for customer satisfaction.
  • Ensured that patrons were safely installed* Provided instructions to patrons* Implemented safety procedures
  • Complied with prescribed safety procedures or federal laws regulating waste disposal methods.
  • Promote safety awareness and comply with all applicable safety procedures and regulations.
  • Ensured all safety procedures were followed per company and regulatory guidelines.
  • Produce pharmaceutical use film for prescriptive containers while maintaining safety procedures.
  • Followed appropriate safety procedures for transporting items within the approved containers.
  • Followed all relevant rig safety procedures and practices during drilling operations.
  • Operated and monitored robots' behavior to accomplish safety procedures.
  • Completed required compliance with special safety procedures and respirator training.
  • Follow safety procedures and company policies for equipment operation.
  • Established safety procedures and routine maintenance of all equipment.

Show More

2. Customer Service

high Demand
Here's how Customer Service is used in Operator jobs:
  • Assisted customers in person Managed wide variety of customer service and administrative tasks to resolve customer issues quickly and efficiently.
  • Developed personal standards of excellence in my customer service, quality of work, personal accountability and self-motivation.
  • Interacted daily with customers and provided excellence customer service by handling and resolving customer service issues.
  • Exceeded all quality and productivity expectations in order to consistently deliver excellent customer service.
  • Receive inbound calls for post purchase support/ customer service Place/cancel orders/shipments Research analyst Data entry
  • Facilitated indirect customer service through the processing and secure handling of customer billing information.
  • Provided excellent customer service receiving inbound calls and giving accurate telephone numbers to customers.
  • Monitored network systems closely to provide uninterrupted customer service and immediate quality control.
  • Maintained quality control/satisfaction records, constantly seek new ways to improve customer service.
  • Provided exceptional customer service is the top priority of every interaction.
  • Answer alarms according to company policy while providing excellent customer service.
  • Provided customer service, preformed machine work, assisted with product delivery
  • Provided high quality customer service to patrons seeking travel arrangements.
  • Delivered quality customer service in providing safe, reliable transportation services
  • Provided customer service to pilots regarding scoring and target acquisition.
  • Maintain guest safety Provide quality customer service Monitor rides during operations
  • Monitor and maintain customer service levels to generate return business.
  • Demonstrated customer service skills to meet and exceed customers satisfaction.
  • Provide customer service, placing and transferring national/international calls.
  • Provided customer service to ensure successful delivery of freight.

Show More

3. Heavy Equipment

high Demand
Here's how Heavy Equipment is used in Operator jobs:
  • Licensed irrigation technician:Installing and maintaining irrigation systems, maintaining greenbelts, expertise in operating various heavy equipment machinery.
  • Operated a variety of heavy equipment including Vac Con Combination sewer/storm drain cleaner and other related equipment.
  • Operated heavy equipment in commercial or residential construction areas; supported underground utilities and managed group teams.
  • Job Responsibilities: Safely operate heavy equipment within confined spaces.,
  • Lime mine operations including rock crushing and heavy equipment operator.
  • Operated heavy equipment on location for relocating drilling rigs.
  • Job duties include operating heavy equipment and directional drilling.
  • Certified on all heavy equipment available and operate regularly.
  • Conducted routine safety inspection on heavy equipment operated.
  • Ensured heavy equipment is safely and securely stored.
  • Operate heavy equipment and perform basic preventive maintenance.
  • Cleaned heavy equipment as scheduled and/or required.
  • Performed duties by operating heavy equipment.
  • Operated heavy equipment in mines for aggregate
  • Operate heavy equipment and company work vehicle
  • Operated heavy equipment building compressor stations.
  • Repaired and operated heavy equipment.
  • Skilled labor heavy equipment operator.
  • Operate heavy equipment at construction sites
  • Operated heavy equipment when necessary.

Show More

4. Daily Operations

high Demand
Here's how Daily Operations is used in Operator jobs:
  • Performed daily operations including maintaining the equipment by performing simple adjustments and weighing ingredients produced by the equipment.
  • Conducted safety reviews; eliminating and corresponding with co-workers to increase safety awareness in daily operations.
  • Executed daily operations, verified control panels and machine layout to make sure everything operated correctly.
  • Executed daily operations of product to be shipped and delivered upon supervisor and customer orders.
  • Executed daily operations of maintaining correct measurements and temperatures for proper distribution of batter.
  • Executed daily operations of educational activities as well as maintained a safe learning environment.
  • Conduct daily operations at a chemical facility dealing with chlorine and other various chemicals.
  • Support daily operations by preparing employees for entries into toxic environments involving chemical agents.
  • Executed daily operations of inspecting and counting the pipe adhering to tube tolerance specifications
  • Effect with ConocoPhillips computer based training and overview of daily operations.
  • Instrument Technician Conducted the daily operations of offshore production facilities.
  • Worked with a Semi-Normalized Oracle based database in daily operations
  • Provide first-hand knowledge of environmental aspects of daily operations.
  • Executed daily operations of recording readings and performing inspections.
  • Executed daily operations of payroll and inventory data entry.
  • Executed daily operations of transporting elderly and disabled passengers.
  • Executed daily operations of removed recycled materials from refrigerators.
  • Utilized GPS navigational systems to plan daily operations.
  • Supervised and ran daily operations of computer department.
  • Executed daily operations of a polyvinyl chloride factory.

Show More

5. Emergency Situations

high Demand
Here's how Emergency Situations is used in Operator jobs:
  • Coordinated and executed countless shifts of electrical distribution system to support maintenance, testing, or emergency situations including Generator parallel operations
  • Connected callers to their requested departments, notified guest of hotel events and reported emergency situations to security
  • Enforce effective security operations by commanding emergency situations, customer evacuations, and maintaining crowd control.
  • Performed necessary procedures for starting up and shutting down equipment during emergency situations.
  • Respond to emergency situations and Identify potential concerns and communicate to management.
  • Develop automated processes to provide redundancy and minimize downtime in emergency situations.
  • Performed maintenance on power plant equipment during outages or emergency situations.
  • Responded quickly and accurately to disaster and emergency situations as required.
  • Handled any emergency situations and reported them to department supervisors.
  • Assessed emergency situations and provided tactical on-scene command and control.
  • Assisted customer who need special assistance in emergency situations.
  • Provide on call help to management/maintenance during emergency situations.
  • Dispatch Security Officers to service calls and emergency situations.
  • Coordinate the response of clinical personnel during emergency situations.
  • Regulated or shut down equipment during emergency situations.
  • Respond to emergency situations per supervisor's instructions.
  • Handled emergency situations requiring police and/or medical services.
  • Performed a variety of special assignments during emergency situations
  • Page emergency situations and follows all emergency guidelines.
  • Received recognition for assisting doctors in emergency situations.

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Preventative Maintenance

high Demand
Here's how Preventative Maintenance is used in Operator jobs:
  • Performed process equipment troubleshooting, minor repairs, improvements and preventative maintenance utilizing the appropriate work processed and disciplines.
  • Performed routine inspection and preventative maintenance on assigned equipment and refers defects or needed repairs to the supervisor.
  • Supervised team in performing preventative maintenance, troubleshooting, and security risk management on all servers and workstations.
  • Blow Mold operations included daily preventative maintenance on machines, production/downtime recording and periodic quality testing and reporting.
  • Performed troubleshooting and routine/preventative maintenance of production equipment as well as production and shipping software across multiple platforms.
  • Worked collaboratively with co-workers to ensure that regular and preventative maintenance procedures are carried out consistently.
  • Performed preventative maintenance and calibrated all machinery/equipment used to cut the glass on a daily basis.
  • Performed routine preventative maintenance/calibration procedures according to prescribed schedules and maintained a 5S housekeeping work area.
  • Maintain accountability for 12 generators and perform corrective/preventative maintenance as well as generator change over.
  • Performed preventative maintenance of sophisticated, state-of-the-art equipment valued in excess of $1M.
  • Maintained production flow in the distribution center Operated and preventative maintenance of Gantry Robotic system
  • Conducted routine equipment inspections and preventative maintenance on equipment, maintains accurate records.
  • Attended monthly/weekly safety meetings to ensure plant operation safety and preventative maintenance.
  • Performed preventative maintenance on machinery, heavy equipment, and company vehicles.
  • Performed preventative maintenance and safety inspections with military vehicles and heavy equipment.
  • Perform preventative maintenance checks on vehicle in compliance with safety regulations.
  • Performed daily preventative maintenance to ensure equipment was operating within spec.
  • Perform preventative maintenance on equipment in order to prevent unnecessary downtime.
  • General preventative maintenance to ensure safe and reliable operating of equipment.
  • Performed preventative maintenance on all Machine Vapor Re-compressors and distillation systems.

Show More

7. Data Entry

high Demand
Here's how Data Entry is used in Operator jobs:
  • Performed Data Entry Operator at the Human Resource Administration Center for Disability Assistance.
  • Documented and verified all production and rejected material to ensure proper data entry.
  • Communicate accurately and efficiently with minimal room for error; heavy data entry.
  • Performed data entry; guided customers on proper usage/sterilization, product distribution.
  • Performed overnight data entry and software operations in an office environment.
  • Maintained constant pace of data entry while simultaneously maintaining quality requirements.
  • Performed data entry for Remittance Processing Department at 7500+ keystrokes/hour.
  • Provided record information of potential customers to bankers, data entry
  • Performed data entry in support of central monitoring station requirements.
  • General administrative and clerical support, including data entry.
  • Conducted data entry function according to Financial Banking guidelines.
  • Mail handler/operator; data entry; destroyed/shredded sensitive material.
  • Maintain and document proper information and accurate data entry.
  • Provided up-to-the-minute data entry of foreign exchange rates.
  • Entered data entry upon completion of measurements.
  • Coordinate, prepare, process each project for document scanning, Quality Check all images, Data Validation & data entry.
  • Performed primarily 10 key data entry to process customer payments in a fast paces environments, meeting quality and productivity standards.
  • Receive shipments for the morning then distribute the orders to the proper Independent Operator, daily inventory and data entry.
  • Categorized and coded complaints for data entry; performed data entry functions to record information; maintained numerous record logs.
  • Scan student test scores on scan machine average 50,000 -60,000 test per shift, printing test sheets, data entry

Show More

8. Phone Calls

high Demand
Here's how Phone Calls is used in Operator jobs:
  • Answered incoming phone calls while maintaining a professional attitude along with above average typing and computer operation skills.
  • Received telephone calls and gave routine information to merchants calling to verify information.
  • Receive numerous emergency and non-emergency telephone calls in a high stress environment.
  • Answered phone calls and responded appropriately to questions related to salon operations.
  • Responded inbound telephone calls from customers regarding telephone listings.
  • Worked independently answering phone calls for paging medical personnel.
  • Prioritize emergency and non-emergency phone calls.
  • Rerouted phone calls whenever necessary.
  • Job Duties: Answer phone calls, redirect phone calls to appropriate department, record messages, and answer callers' questions
  • Answered phone calls for over 300 companies after hours, during lunch hour, or during meetings the clients would have.
  • Answered alarms via monitoring client system, answered phone calls and solved alarm problems from all BNYM locations around the world.
  • Completed an extensive 80 hour training that focused on appropriate techniques for managing information referral, crisis and emergency phone calls.
  • Ensured that all phone calls received are professionally assisted, and directed to the proper business or individual for immediate response.
  • Transferred incoming phone calls for 4 different hospitals, addressed alarm codes as they came in for the 4 different hospitals.
  • Assisted teachers who were in need of aid with any type of computer component through phone calls and room visits.
  • Answer phone calls and transfer customers to right department, assist customers into fitting room, and keep my department clean
  • Answered phone calls for local physicians, received and delivered messages to doctors accordingly, stayed in compliance with HIPAA regulations
  • Promoted to level two, which includes 100s of additional medical accounts and taking phone calls on two lines simultaneously.
  • Directed phone calls to the designated department and give customer assistance to questions or concerns a person may have.
  • Received phone calls from physicians, attorneys, employers, and claimants; reviewed and answered their questions.

Show More

9. Dozer

high Demand
Here's how Dozer is used in Operator jobs:
  • Stockpiled crushed stone, loaded barges, delivered dynamite within the quarry, and operated a D8 bulldozer.
  • Pulled dirt pan with large tractor * Pulled box scraper * Maintained equipment * Operated Bulldozer & Back Hoe
  • Operated various equipment such as tractors, bulldozers, and equipment required to build a new highway system.
  • Operate Bulldozer; Concrete Work; Operate Heavy Equipment; Transport Heavy Equipment by truck and 40-foot trailer
  • Operated Caterpillar D4, D5, & D6 bulldozers, and a Caterpillar 345 excavator.
  • Operated power construction equipment such as motor graders, bulldozers, scrapers and front-end loaders.
  • Operated a bulldozer to properly move dirt and pack to build roads.
  • Operated loader, bulldozer, skid steer, box-blade and back-hoe.
  • Operate bulldozer and excavator in work site the company had projects.
  • Operate Caterpillar D7E and D8T bulldozers during right-of-way and cleanup construction.
  • Operated bulldozer and was trained on other pieces of equipment
  • Operated bulldozers, excavators, road-graders and scrapers.
  • Operate loaders, excavators, and bulldozers.
  • Operated Bulldozers and other large equipment.
  • Operated bulldozer to maintain coal stockpile.
  • Operated the bulldozer when needed.
  • Operated large scale dozers and excavators
  • operated bulldozer and compactor in landfill
  • Operated excavator and dozer on cleanup
  • Operated loaders, excavators, dozers & forklifts as necessary to support operations associated with road building & turbine foundation installation.

Show More

10. Assembly Line

high Demand
Here's how Assembly Line is used in Operator jobs:
  • Earned recognition for producing equally impressive results both independently and as a team member within assembly line setting.
  • Operated assembly line producing magnetic media products, quality control testing and data input of production information
  • Recognized and participated in the implementation of correct operating procedures on newly built assembly lines.
  • Operated assembly line producing plastic automobile parts by machine.
  • Performed daily assembly line operations for processing.
  • Performed random checks of assembly line production processes
  • Qualified machine operator on various assembly lines.
  • Crossed trained on five models of wheeled loaders, 4 models of articulated hauler cabs plus several zones on assembly lines.
  • Worked as an operator, packing and sorting parts making sure they are good enough to move to the assembly line.
  • Worked as a part of team on an assembly line manufacturing high production level of products to meet daily quota.
  • Key duties included processing orders by scanning out merchandise for shipping as well as working on the assembly line.
  • Operated factory machinery and produced wafers along assembly line while inspecting for anything out of the ordinary per spec.
  • Clean machines, Assembly line, load and unload trucks, operated fork lift and relive operator for break.
  • Performed as senior assembly line operator of struts and shocks ensuring an on schedule and safe production operation.
  • Work on assembly line to produce high quality auto parts and components in a safe and timely manner.
  • Light assembly line, reading orders, hot gluing rubber cuffs on industrial hose, packing, shrink wrap
  • Well trained in over 20 different positions on an assembly line and testing facility for newly assembled parts.
  • Job duties involved operating a tug or forklift, and monitoring assembly line inventory of multiple parts.
  • Trained in all positions on assembly line in order to respond quickly and fill in where needed.
  • Operate machinery on assembly line building headlamps for Honda, Nissan, Toyota, and various others.

Show More

11. Trouble Shooting

high Demand
Here's how Trouble Shooting is used in Operator jobs:
  • Dispatched Authorities Trouble shooting and monitoring of alarms Customer Service
  • Machine operator overseeing machines and trouble shooting when needed
  • Trouble shooting non-conforming parts during operation.
  • Trouble shooting ability whenever necessary.
  • Bay Operator: Material Handling, Quality Control, crane operation, Forklift operation, trouble shooting, maintaining safety standards.
  • Help in assisting customers in what they are searching for and trouble shooting any problems that I am qualified to handle.
  • Test Desk Technician, Installation and repair of Special Service circuits including testing and trouble shooting of analog and digital services.
  • Trouble shooting equipment or raw material issues when there was a quality issue on products during running of product on shift.
  • Trouble shooting, data processing changes adding or changing accounts, complete customer request via email, generating service ticket.
  • Trouble shooting and problem solving skills were used as City Operator, for equipment, water/sewer, and snow removal.
  • Provide general PC software and hardware support along with overall AS/400 trouble shooting and support with 24hr on-call service.
  • Assisted in trouble shooting of the equipment, and identified several problems with large cost saving to the companies.
  • Started as an operator in the Middle Mesa area for pump jacks and compressor maintenance and trouble shooting.
  • Conducted trouble shooting and stranded armor recovery and repair * Accountability and maintenance of assigned tools and vehicle.
  • Manage and supervise operations, maintenance, and trouble shooting of the WWTP and its collections systems.
  • Trouble shooting problems and doing all this while also wearing and using the right safety equipment properly.
  • Processed product through the W/B step on multiple types of bonding equipment while trouble shooting machine issues.
  • Conducted monthly MMS & USCG testing and inspection* Familiar with pneumatic/electronic instrumentation and capable of trouble shooting.
  • Trouble shooting and repair of automated packaging machinery also replacing solenoid valves and other machine parts.
  • Trouble shooting and problem solving skills to allow fast and accurate assessment of situations or problems.

Show More

12. Backhoe

high Demand
Here's how Backhoe is used in Operator jobs:
  • Run various equipment -Bulldozer/Excavator and Backhoe Operation -Site preparations, Utility Installation -Equipment Transportation
  • Operate heavy equipment such as: Backhoes, Excavators, Front End Loaders, Dump Trucks, and Bush Hogs.
  • Installed joint trench utilities in subdivisions (gas, phone, CATV and electric) Operated backhoe and compaction equipment.
  • Operated Front end loader, backhoe, Grader and ran dump truck while maintaining the roads of our district.
  • Operated Loaders, backhoe, track-hoe, bulldozer, single and tandem axle dump truck and articulated dump truck.
  • Pack trailer with backhoe or loader, change out trailer with Semi, cover and replace with new trailer.
  • Operated heavy equipment (load, pan, and backhoe) effectively reducing injury, property damage or loss.
  • Snow Removal - For Global Services I operate a backhoe to remove snow from Lockheed Martin's parking lots.
  • Put ties in with a backhoe load and dump stone on new tracks that we built run regulator behind tampers
  • Operate multiple types of heavy equipment including an articulating haul truck, loader, backhoe, and excavator.
  • Operated heavy equipment of all sizes (front loaders, backhoes, excavators, bulldozers, scrapers).
  • Operated backhoe, bulldozer, and loaders installing methane gas recovery system for Monmouth Recycling Center in New Jersey
  • Excavate, Back fill, Excavator, Mini Excavator, Backhoe, Wheel loader, Skid Steer.
  • Operated backhoe, front end loader, tractors with discs, plows and spreaders and brush cutters.
  • Installed underground electrical lines, operation of backhoe, fiber optic installation, landscape and concrete.
  • Operate forklift, backhoe, excavator, bulldozer, scraper, road grader and skid steer.
  • Operate heavy equipment, such as: Excavators, Scrapers, Backhoes, Front End Loader.
  • Achieved and exceeded goals set by Dawson Moody in demolishing buildings using excavators and backhoes.
  • Use of backhoe, excavator, bobcat, front end, etc.to knock down structure...
  • Operated heavy machinery such as backhoe, dump trucks, fork lift, and bobcat.

Show More

13. Set-Up

high Demand
Here's how Set-Up is used in Operator jobs:
  • Executed set-up equipment manufacturing, reconciliation and activities required in work instruction and batch records process validation and dispose hazards waste.
  • Specialized Training/Achievements: Veterans Administration approved training program of 2200 hours on screw machine set-up and operation.
  • Performed equipment set-up, system calibrations and conduct testing using documented procedures.
  • Performed set-up and operation of JobMaster and all computer related support.
  • Served as a set-up operator and mechanic for precision operations.
  • Follow coating process procedures including set-up instructions and internal specifications.
  • Worked in assembly set-up in manufacturing medical devices.
  • Lead operator and Set-up Supervisor.
  • Trained new employees, evaluated employee performance and provided feedback * Cross-trained employees on various machines * Set-up line for daily production
  • Performed set-ups, machine adjustments, operated preventive maintenance and regular quality inspections on the product and other duties as assigned.
  • Used judgment to plan and perform duties; made decisions as to set-ups and operation that would best supply internal customers.
  • Trained four new employees on how to perform set-ups and proper procedures, including how to maintain production when machines malfunctioned.
  • Job duties entailed set-up and operation of machines that inspected parts made in the facility before they were shipped out.
  • Learned to set-up and operate machines for production or bit repair according to bit specifications and bill of materials..
  • Changed the set-up of shear table to make more ergonomically correct therefore preventing back strains and other possible accidents.
  • Design and fabricate fixtures - Set-up, operate and inspect close tolerance parts - Entrusted to machine customer supplied parts
  • Inputted program data, set-up and tore down automatic tables, loading feeders with various sizes of electronic components.
  • Key responsibilities included: demonstrated exceptional skill in the machine set-up for the processing and production of automobile filters.
  • Worked for Uncommon Grounds Coffee Shop: served/sliced bagels, completed transactions, served hot/cold beverages, helped set-up/break-down stand
  • Experienced in software installation, set-up procedures and user training related to U.S. Military training tools and environments.

Show More

14. CNC

high Demand
Here's how CNC is used in Operator jobs:
  • Programmed CNC machine for component placement and trigonometry assessment of circuitry board.
  • Operated CNC machinery to drill and rout low tolerance patterns and remove individual PCB's from production lot panels.
  • Work closely with Engineering, Quality Management, and CNC machinist in an effort to produce quality parts.
  • Operate Ann Arbor dial machines, CNC machining center, CMM, inspection and gauging of automotive parts.
  • Maintained equipment, packaged and shipped parts, also ran CNC Lathes and Mills, Ran Band Saws.
  • Operated CNC Horizontal & Vertical Turning, CNC Vertical Milling & Machining, CNC Horizontal Milling & Machining.
  • Forge fabricator Primary Duties: Responsible for the set up and operation of CNC machine and GFM robot.
  • Worked as a CNC (Computer Numerical Control) Operator, with a Phase III Top Team.
  • Preformed secondary fabrication operations on aluminum and steel parts utilizing grinders, CNC lathes and CNC mills.
  • Operated CNC machines, milled small parts for the auto industry, read and interpreted blueprints.
  • Feed machine and off load, inspect, gauge, and calibrate parts, CNC operator.
  • Operated the core builder, Laser machines, OTC robots, CNC Machines, Leak testers.
  • Job purpose- To do set up on CNC and manual equipment in cell production atmosphere.
  • Program degrees off blue prints into CNC Brake Press, and Plasma burner.
  • Operated a CNC machine which involved cutting, trimming and cleaning automotive trim.
  • General operation of various 3, 4, and 5 axis CNC machinery.
  • Operated a CNC controlled radial forge and all associated components of the cell.
  • Operate CNC and other secondary drills and presses for production of parts.
  • Operated CNC machines, Precision metal saws, Stamping & Drill presses.
  • Operated CNC machine including setting up to make taps to customer specification.

Show More

15. Dump Truck

average Demand
Here's how Dump Truck is used in Operator jobs:
  • Operate and maintain Automated Robotic Packaging system/ operate dump truck.
  • Operated Caterpillar Articulated Dump Truck.
  • Operated heavy equipment including front end loader, off road dump truck, rollers, packing equipment and other general labor.
  • Emptied grain bins, helped lay out aeration for bins during harvest, dump trucks at the grain elevator during harvest.
  • Operated excavators ranging in size from CAT 336 to John Deere 670G in cutting rough grade and loading on/off-road dump trucks.
  • Job Description- Operate dump trucks and heavy equipment used in the building, maintenance and snow removal of county roads.
  • Will do the clean up if included in price, have access to dump truck and tractor for bigger jobs.
  • Load dump trucks with loaders and excavators, dig foundations, and clear lots while maintaining a safe working environment.
  • Operate Cat Front End Loader, Bobcat, and dump truck daily to move debris and material safely to sites.
  • Operated: skid steer, tractors, loaders, supply haulers, dump truck, man carriers, forklift underground.
  • Operate an off road dump truck, scraper, bulldozer, steel wheel compactor, excavator, rubber tire loader.
  • Used heavy equipment to pick up scrap steel from recycling facility and delivered to rail mover via dump truck.
  • Job duties here mainly consisted of operating a large off-road dump truck and filling in on the service crew.
  • Operate TCM forklift, Case W-20C articulated loader, 6yard dump truck, and Ottawa yard truck with semitrailer.
  • Operate track hoe to safely remove drill cuttings from open top into roll over off or end dump truck.
  • Operated varies equipment and drove a dump truck with tilt deck and pup hauling equipment and different types of materials
  • Operate articulating dump truck(ADT), and various other machines/equipment, including forklift, and skip loader.
  • Operated dump trucks, tractors, loaders as well as labor to maintain the roads of Jackson county.
  • Operated a screening plant and dump truck, tracked loader to provide cross functional support regarding operations and procedures
  • Loaded trucks with forklifts, filled hoppers, ran a pay loader, and operated dump trucks.

Show More

16. Quality Standards

average Demand
Here's how Quality Standards is used in Operator jobs:
  • Performed in-process quality control inspections alerting management to deviations and made machine setting adjustments to bring production back into quality standards.
  • Perform collection, statistical interpretation and analysis of process data to aid product development and improve quality standards.
  • Cooperated with engineering, manufacturing and corporate accounting to verify that quality standards were met.
  • Lead processor for highest level complex accounts exceeding productivity and quality standards.
  • Identify trends or issues that negatively affect customer satisfaction or quality standards.
  • Followed standard operating procedures to meet service quality standards.
  • Examined products to verify conformance to quality standards.
  • Developed quality standards for areas of expertise.
  • Maintain company safety and quality standards.
  • Followed safety and quality standards.
  • Maintain equipment by doing daily, weekly and monthly testing in order to meet the highest quality standards for the customers.
  • Assign personnel to positions on the binder line utilizing proper manpower to meet production needs, quality standards and customer requirements.
  • Diagnosed defects and performed quality work checks to insure the products met quality standards, using in-process inspection tools and devices.
  • Input data into computers, load materials into machines to maintain steady production, fix minor machine errors, maintain quality standards
  • Aligned and position pipes to prepare them for welding or sealing and examined pipes to verify conformance to quality standards.
  • Loaded machines, packed, etc., maintaining high production and quality standards; kept clean, safe work environment.
  • Tasked with monitoring equipment operation to ensure adherence to stringent quality standards, proper operation and correct flow rates.
  • Build parts and run through injection molded plastic press, 6S, inspect parts for conformance to quality standards.
  • Perform all product inspections and test in accordance with established quality standards, inspection plans, and test procedures.
  • Prepared and served menu items, operated cash register and cleaning to maintain the quality standards within the park

Show More

17. Osha

average Demand
Here's how Osha is used in Operator jobs:
  • Perform scheduled and unscheduled maintenance to ensure proper operation and performance of equipment and complying with OSHA safety requirements.
  • Conducted hourly safety rounds, tracking hazardous chemical levels and tracking OSHA regulated indicators.
  • Conducted OSHA safety briefs and enforced safety measures resulting in zero incidents
  • Participated in extensive safety training to meet OSHA guidelines and regulations.
  • Evaluate and monitor OSHA guidelines and other government regulatory agencies.
  • Instruct abatement crews throughout abatement process according to OSHA Regulations.
  • Performed safety walk-downs correcting OSHA violations.
  • Accustomed to wearing protective clothing and wearing all levels PPE on a regular basis up to and including OSHA Level A.
  • Perform maintenance and fix pumps, filter press, and all process lines in accordance with all safety and OSHA regulations.
  • Inspect and Fill Various Medical, Industrial and Cryogenic Gas Cylinders In Accordance With CGMP, OSHA and FDA Standards.
  • Certified heavy machinery operator in the process of clearing and replanting pipeline areas - Worked within OSHA guidelines at all times
  • Purchased all materials used in production facility as well as setting safety plan in place to comply with OSHA standards.
  • Completed all required documentation, including daily reports using Microsoft excel spreadsheets, JSA's, and OSHA safety logs.
  • Participate in required safety training, which includes meeting OSHA, D.O.T., EPA, and other government safety guidelines.
  • Followed established safety practices and guidelines through training on a continuous basis from OSHA (Occupational Safety & Health Administration)
  • Installed trench safety equipment such as trench boxes and hydraulic shoring as per OSHA standards for excavations up to 30 feet
  • Serve as OSHA A and DPE entrant and backup into areas contaminated with Chemical Agent HD/HT and other hazardous chemicals.
  • Set up, maintenance and monitoring of jobs to ensure proper operations to required specifications and following OSHA safety regulations.
  • Certified on all OSHA and HIPPA competencies with a direct application to medical records and the handling of confidential information.
  • Execute Demilitarization Protective Ensemble (DPE) and OSHA A, toxic area entries for cleaning and agent sampling.

Show More

18. Quality Checks

average Demand
Here's how Quality Checks is used in Operator jobs:
  • Perform quality checks to ensure finished products meet established quality standards.
  • Performed necessary in-process quality checks to ensure output is consistent.
  • Performed in-process quality checks and manual inspection of finished products.
  • Performed quality checks on machinery to measure various performances.
  • Enter data into infinity stations for referencing quality checks.
  • Record results of quality checks thoroughly on controlled documentation.
  • Performed all quality checks in accordance to customer specifications.
  • Performed Quality checks to maintain contracts with manufacturers and optometrists
  • Perform quality checks as specified by manufacturing records.
  • Completed all required documentation and scheduled quality checks.
  • Perform required quality checks and record information.
  • Understand and perform quality checks qualifications.
  • Performed quality checks on tires manufactured.
  • Perform necessary in-process quality checks.
  • Perform routine quality checks and document using HMI (Human Machine Interface) and initiate proper hold procedures for non-compliant product.
  • Finished part quality checks and bundling of final product to a tote then labeled, wrapped and stacked on to pallets.
  • Increased color book production volume by 15% by implementing quality checks that more efficiently and effectively identified quality concerns.
  • Conduct quality checks on poured castings, track temperatures, and make adjustments to temperatures to maintain proper temperature range.
  • Open valves, check temperature gauges for material flow and perform quality checks to ensure resin is in proper specifications.
  • Operated heavy mixing machinery - Responsible for the training, coordinating and supporting mixing team - Performed random quality checks

Show More

19. Raw Materials

average Demand
Here's how Raw Materials is used in Operator jobs:
  • Coordinate the management and monitoring of raw materials, pharmaceutical products and all instrumentation.
  • Weighed and documented accurately the issuance of approved raw materials used in manufacturing.
  • Checked raw materials to ensure batches manufactured contained proper quality.
  • Maintained warehouse storage for raw materials and finished materials.
  • Transport raw materials from warehouse to processing facility.
  • Received and maintained inventory of raw materials.
  • Restocked raw materials for production operators.
  • Set up and starts automatic filling and packaging equipment, loads packaging and raw materials, and packs off finished product.
  • Receive and inventory raw materials via tank and box truck, transfer to appropriate storage vessels when contents verified by lab.
  • Charge raw materials from drums, totes, storage tanks and tank trailers by hand utilizing pneumatic and process pumps.
  • Inspect, test, sort, sample, or weigh raw materials or processed, machined, or fabricated materials.
  • Loaded and unloaded tanks, tank trucks and rail cars of raw materials and finished product also used drums.
  • Performed cutting, bending, mixing and melting of titanium from raw materials to final product to be shipped.
  • Inspect or test raw materials, products, containers, or samples to verify packaging weights or ingredient quantities.
  • Job Duties:Responsible for the production of raw materials by carrying sandstone from the face to the crusher.
  • Maintain inventory of raw materials including phenol, urea, and methanol, 50% caustic and aqua ammonia.
  • Helped in development of run plans to direct the safest and more efficient ways to melt our raw materials.
  • Involved in cycle counts and balancing inventory numbers in Oracle programming of finished joint treatment goods and raw materials.
  • Weighed off raw materials, poured batches into containers, transferred drummed material into blenders while following SOP.
  • Operated multiple recycling machines and generators to cut, mix and manufacture paper and cardboard from raw materials.

Show More

20. Front End Loader

average Demand
Here's how Front End Loader is used in Operator jobs:
  • Operated and monitored equipment included in the waste-water treatment process including operating front end loaders.
  • Front end loader operator / mini excavator operator/ Bobcat operator
  • Operated heavy equipment such as forklift, skid steer loader, man lift, front end loader, and boom truck.
  • Time management Centrifugal Fluid types knowledge Safety measures around tanks concerning h2S Safety around pressurized lines Front end loader, and forklift
  • Can operate many pieces of equipment including a front end loader, back-hoe, various rollers and a finish motor-grader.
  • Last 2 winters I did snow removal on 40 oil pad locations using motor grader and front end loader.
  • Operated skid-steer, excavator, plow machine, front end loader and drove end dump and side dump semi.
  • Operated a front end loader, backhoe, and set culverts in ditches as part of the employment.
  • Operate front end loader to load trucks, stock pile material from barges, mix materials for bedding.
  • Operated front end loader to move sawdust around at our facility for storage and running our plant.
  • Tree cutting and removal, operating Roller, front end loader experience, blacktop, concrete repair.
  • Operate excavator, front end loader, lift crane, tractor, and line inspection video equipment.
  • Operated construction or maintenance equipment such as graders, bulldozers, front end loaders, backhoes.
  • Operate excavator, haul truck, scrapper, front end loader, skid steer, etc.
  • Load train with iron Using front end loader and excavator also used a magnet on a grapple
  • Crush pit operator, seeds shaker operator, Using the forklift and front end loader tractor.
  • Operate bulldozers, rollers, front end loaders, mixers, mini-track hoes, skid steers.
  • Operated heavy equipment (track hoe, bobcat, front end loader, etc.)
  • Operated industrial dryer system, front end loaders, forklifts, light maintenance and repair.
  • Load and unload trucks with front end loader as well as fork truck, bobcat

Show More

21. Hand Tools

average Demand
Here's how Hand Tools is used in Operator jobs:
  • Clean, lubricate, and adjust equipment, using scrapers, solvents, air hoses, oil, and hand tools.
  • Operated heavy equipment, small equipment and various hand tools for the burial of fiber optic cables and also electrical wiring.
  • Clean, maintain, and repair equipment, using hand tools, or request that repair and maintenance work be performed.
  • Operated hand tools, drill pressers, and riveting machines and tap burners*Planned and laid out work to meet production schedule requirements
  • Attach farm implements such as plows, discs, sprayers, or harvesters to tractors, using bolts and hand tools.
  • Rig or dismantle props or equipment, such as frames, scaffolding, platforms, or backdrops, using hand tools.
  • Operate drill press, saw cutter and grinder; skilled use of hand tools; polishing; buffing, floor waxing.
  • Formed and assembled slab cores around patterns and positioned wires in mold sections to reinforce molds using hand tools and glue.
  • Remove materials and products from machines and equipment, and place them in batches, using hand tools and moving devices.
  • Make, restore, or create custom upholstered furniture, using hand tools and knowledge of fabrics and upholstery methods.
  • Used hand tools, power tools, precision measuring instruments, electrical and electronic testing devices and hoists and lifts.
  • Provide efficient use of pneumatic and hand tools to produce and maintain high quality yarn in a continuous process environment.
  • Trained New Operators, Heated, formed and dressed metal parts with hand tools, torch and arc welding equipment.
  • Repair and service blasting, shooting, and automotive equipment, and electrical wiring and instruments, using hand tools.
  • Operated wide variety of equipment including Mixers, semi auto bagging equipment, crane, forklift and basic hand tools.
  • Attach, fasten, and disconnect cables or lines to loads, materials, and equipment, using hand tools.
  • Run and operate a four-stage separator as well as other equipment and hand tools on location without assistance e.g.
  • Use hand tools, perform maintenance on equipment such as lubricating nuts and bolts, replacing gaskets and valves.
  • Install dies on machine, according to work order specifications, using clamps, bolts, and hand tools.
  • Assisted labor forces on the ground construct track using hand tools and pneumatic, gas and hydraulic power tools.

Show More

22. Frac

average Demand
Here's how Frac is used in Operator jobs:
  • Operate fracturing equipment in a safe and efficient manner during Fracturing operations.
  • Briefed facility management regarding potential infractions of Colorado state and federal laws.
  • Performed well stimulation and fracturing.
  • Supported well site fracturing operations.
  • Rig up fracturing pump trucks to water, chemicals and sand, as well as the natural gas well head.
  • Worked with the chemical engineering department to design and apply chemicals to well bore designs during the hydraulic fracturing processes.
  • Performed advanced duties at multiple sites throughout the process of fracturing oil wells to initiate the production of oil.
  • Managed crews that maintained chemically-based fluids used in the fracturing process at drilling sites throughout South Texas.
  • Learned how to operate and maintain all equipment that is used in the operation of Hydraulic Fracturing.
  • Train new and inexperienced employees how to operate and maintain equipment essential to the hydraulic fracturing process.
  • Rig up and down equipment to create a Bi-fuel that runs the entire fracturing process.
  • Ensured the unit had the appropriate amount of water & gel for the fracturing process.
  • Heat fracture fluid to customers desired temperature through intricate flow system fueled by propane.
  • Recognized in CalFrac's monthly chronicle for great performance and going above and beyond.
  • Loaded part on to refractory to be fired in a high temperature kiln.
  • Operate both FracCADE, FracCAT, and FPC execution software programs proficiently.
  • Refilled totes with gel after each zone to continue the fracturing process.
  • Followed all airline and airport regulations never committing a single infraction.
  • Mentor for new hands to learn the basic operations of fracturing.
  • Monitor and operate gas flow as fracturing process goes on.

Show More

23. Pallet Jack

average Demand
Here's how Pallet Jack is used in Operator jobs:
  • Machine Operator for vitamins* Protein powders* Collected and prepared capsules* Bottled vitamins* Use of pallet jacks* Operated forklift when needed
  • Packaged material to load onto the delivery trucks utilizing pallet jacks and forklift when necessary
  • Scan the inventory process returns different stores, Lifting 70 pound objects frequently, pushing and pulling equipment using a pallet jacks
  • Operated pallet jacks and forklift to prepare products for shipment; assisted co-workers in organizing and maintaining a safe warehouse.
  • Drive PE 1500, pallet jack, load and pull freight from warehouse shelving to load on semi truck trailers.
  • Place 40 pound logs into metal coffin and move to freezer with motorized pallet jack if slicing rooms go down.
  • Operated a variety of bag cutting machine, stacked and labeled cartons for shipment; operated pallet jack and forklift.
  • Utilized operated forklifts, pallet jacks, and other equipment used to safely load, unload, and transfer merchandise.
  • Manage Assembly Line, Load Boxes Onto Pallet using A Pallet Jack to transport Pallet To Shrink Wrap Station.
  • Unload and load trucks with pallet jack, moving product from one place to another throughout the departments.
  • Wrap the orders when the bills made and load onto semi trucks with rider pallet jack and forklift.
  • Used heavy machinery and equipment, including forklifts and pallet jacks, to load and unload freight trucks.
  • Operated pallet jacks to pick up large orders of merchandise and delivered them to correct loading docks.
  • Transferred product and materials using motorized equipment (forklifts, bale clamps, and pallet jacks).
  • Operate Silkscreen Printing Machine, Assist Operator #1, Operate Pallet Jack, Mix Ink For Printings
  • Operated equipment such as, Vehicle lifts, forklifts, pallet jacks, and trucks with trailers.
  • Order picker packer operate pallet jack machine and forklift unload containers and wrap pallets maintain warehouse clean.
  • Crane Operator, Labeling, Packaging, Computer Usage, Pallet Jack Usage, Keeping Clean Work Area
  • Operated forklift and stand on pallet jacks for the loading and unloading of frozen sea food products.
  • Packed finished assemblies for shipment and transported them to storage areas, using pallet jacks and forklifts.

Show More

24. Bobcat

average Demand
Here's how Bobcat is used in Operator jobs:
  • Operated heavy machinery such as bobcat equipment and also operated and paved asphalt performed demolition work.
  • Lead Chemical Operator Forklift and Bobcat Operator Shipping and Receiving Shift Maintenance and Electrical Inventory
  • Operated and effectively handled BOBCAT equipment in sugar refinery.
  • Used a bobcat to push magnesium scrap into a trailer to be shipped off to be melted back down into bars.
  • Operate bobcat excavator etc does concrete work finishing and pouring landscaping skills, in warehouse skills, packaging, stocking
  • Trained as a DC operator, pouring casting billets using forklifts, Bobcats and a multitude of hand tools.
  • Used forklift, bobcat and cherry picker; filled in potholes and sealed cracks on the toll road.
  • Run the bobcat and perform most of the manual labor, Also perform Arc Welding on certain metals.
  • Maintain and operate the Bobcat * Sort through metals and organize by type * Loading and unloading of trucks
  • Worked with asphalt; operating heavy equipment such as the loader, bobcat, sweeper, and pneumatic.
  • Assisted climber with gear, ran the bobcat, ran office when not needed on the job.
  • Operate heavy machinery such as trenching machine, powered shovel, back-hoe, bobcat, fork lift.
  • Operated front bobcat skid steer loader as well as drove to and from location with company truck.
  • Operated backhoe, excavator, grader, loader, most all road equipment including bobcat and broom.
  • Melt down magnesium scrap to make ingots* Maintain furnaces and equipment* Loading and unloading furnaces with a bobcat
  • Operated heavy equipment such as locomotive, filter press, bobcat, forklift and caterpillar 966.
  • Operated loader, forklift, bobcat, or other equipment to move material to designated area.
  • Operated Bobcat, Forklift and cleaned up production areas and assisted production operators with different duties.
  • Started out as a ground laborer and after a year got out in the bobcat.
  • Operated backhoe, Vermeer trencher, Bobcat, Vac-Tron, forklift and heavy commercial trucks.

Show More

25. Unload Trucks

average Demand
Here's how Unload Trucks is used in Operator jobs:
  • Unload trucks or to supply production areas with product, remove finished goods to a warehouse storage area inspecting lifts before use
  • Unload trucks using cherry pickers, sit down stand up and slip sheet forklifts, or other moving equipment.
  • Used a forklift to load and unload trucks Pulled orders and printed bill of ladings Stocked inventory Monthly inventory
  • Operate overhead crane and forklift to pull and stage orders, and to load and unload trucks.
  • Load and unload trucks, assist with cycle counts and utilize computer to track shipments and inventory.
  • Load and unload trucks, haul steel, stack steel, inventory, organize yard, etc.
  • Unload trucks, fill out paper work, change filters, make sure pumps are running correctly
  • Fork lift operator, load and unload trucks, shipping and receiving, conveyor line experience
  • Operated a gas and electric fork lift, to load, and unload trucks daily.
  • Operated equipment to load and unload trucks to fill the order of the purchasing clients.
  • Unload trucks and stock freight on shelves, maintain inventory in back stock room.
  • Load and unload trucks in a safe and time-effective manner to maintain productivity standards.
  • Unload trucks and sorted parcels in order to prepare for the next delivery window.
  • Operated a forklift to load and unload trucks and move material throughout the plant.
  • Load and unload trucks and pulling orders as order come through the system.
  • Drive forklifts to unload trucks, moving pallets and to put product away.
  • Used forklift to load and unload trucks, worked on truck as helper.
  • Order puller, forklift, load and unload trucks, shipping and receiving.
  • Load and unload trucks with forklift, pull orders, stock merchandise, etc
  • Dig Holes, Run Machines, Haul equipment, Load unload trucks.

Show More

26. Job Site

average Demand
Here's how Job Site is used in Operator jobs:
  • Follow established job site regulations.
  • Oversee and install packers and equipment at customer job sites, account for caliper and measure all packers and down-hole tools.
  • Operate backhoes, skid-steers, rollers, loaders, brush hog, hauling equipment from job site to job site.
  • Job Description: Coil tubing, coil operator, pump operator, hauled coil unit from & to job sites.
  • Trained hands to do jobs correctly on the floor, derrick, running rig and on the job site.
  • Operate multiple machines daily, lay drainage pipes, work on machines, and keep order on job site.
  • Receive daily project reports, prepare truck with all needed equipment, report to job site using company vehicle.
  • Used company vehicle to travel to customers job site and hauled materials and tools needed to complete the job.
  • Maintained the safety and efficiency of equipment used to supply pressure to other machinery used on the job sites.
  • Participate in identifying hazards at job site and ensure corrective measures are taken to ensure a safe work environment.
  • Complete incoming work orders, assist customer complaints, and perform other maintenance that arises on job sites.
  • Inspected and measured glass to ensure that glass was ready to be loaded and delivered to job sites.
  • Moved material around job site and removed also wk with excavation in some pipe work prepared for hot topping
  • Worked on grading parking lots, building pads, and cleared new job sites to be started on.
  • Job site supervisor for oilfield production pads, who was to look over a small group of workers.
  • Job sites consisted of many types of terrain and locations, outside, inside and on federal installations.
  • Hauled trailers with heavy equipment to and from job sites both in state and out of state.
  • Work involved building high tension electrical transmission lines and hauling steel structures to and from job sites.
  • Coordinated a crew of 3 people or more to complete required job tasks at each job site.
  • Transport equipment and supplies from different job sites using work trucks with time limits in responsible manner.

Show More

27. CDL

average Demand
Here's how CDL is used in Operator jobs:
  • Drive tractors, apply ammonia, spread fertilizer, and work on machinery, maintenance, welding, received CDL
  • Drive class A CDL, lay liners in sanitary sewers, also took video's of sewer lines.
  • Possess a current Class-A CDL for driving company trucks and hauling of equipment to various job locations.
  • Obtained CDL in which I was able to drive equipment to different locations for land jobs.
  • Oil field operation: drive, operate and maintain Class A CDL mounted equipment.
  • Operate motor vehicles up to ten passengers with class C CDL with passenger endorsement.
  • Attained class A CDL to haul over sized loads across the state.
  • Complete my CDL License, for Driving Tankers and Roll- off Trucks.
  • Have current DOT medical certificate and class A CDL with PTX endorsements.
  • Operate my equipment properly, and with ease CDL class A.
  • Obtained and still hold Class B CDL with tanker endorsement.
  • Drive a sludge truck with an intrastate CDL B license.
  • Hold a CDL with class B endorsement Access Operator 1.
  • Received a Class B CDL with air brakes license.
  • Operate vacuum truck* Supervise operating crew* Class A CDL Driver
  • Obtained CDL Class A license through company training school.
  • Obtained CDL A and operated and transported trucks.
  • Operated front loader truck, maintain Class B CDL
  • Operated heavy machinery, Drove Class A CDL trucks
  • Obtained my CDL while working with Baker Hughes.

Show More

28. Sort

average Demand
Here's how Sort is used in Operator jobs:
  • Extracted a large variety of client documents and/or sorted by specific criteria while maintaining production quality expectations.
  • Remove containers of sorted mail/parcels and transfer them to designated areas according to established procedures.
  • Performed secondary operations such as sorting or assembling.
  • Sorted and organized all documentation for delivery.
  • Operated a mechanized letter sorting machine.
  • Job Duties: Clean names and addresses on mailing lists and run through presort program to sort according to postal regulations.
  • Mail handler, USPS Harrisburg, PA Responsible for culling and sorting thousands of first class mail in the culling breakdown.
  • Recruited from Metro Tech / high school to sort, bundle, balance and prep customer payments for processing and posting.
  • Organized, separated, weighed and collected an assortment of metal and scrap materials to be shipped to metal companies.
  • Position required heaving lifting, rapid; accurate sorting of types of inventory, including large furniture and other materials.
  • Operate all sorts of equipment, excavator skid steer and utility trucks and also semi that includes tankers and doubles.
  • Worked in cold storage keg freezer, picking and sorting product by date month and year to ensure adequate rotation.
  • Sorted and distributed US Postal mail to building employees at Cleveland Clinic; ensured prompt delivery of certified mail.
  • Unload and handle assorted materials off trucks, organize material in racks, complete paperwork and identify materials properly.
  • Operated copy machine, calculator, entered information on PC, and sorted daily mail by received date.
  • Help maintain safety, standardization, sort, shine and sustain(5S) of all pack lines.
  • Pulled document separators, opened mail, sorted medical documents to company specifics, and batched for scanning.
  • Specialized in the upgrading of assorted coffee ingredients Repackaged supplies for storage and shipment purposes to different vendors
  • Grade classify, or sort products according to sizes, weigh, colors, or other specifications.
  • Operate machine that opens mail and separates contents, sorting, reviewing checks, and data entry.

Show More

29. Machine Operation

average Demand
Here's how Machine Operation is used in Operator jobs:
  • Operated and monitored equipment/line, removing or shifting materials and finished product as necessary to facilitate proper flow and machine operation.
  • Fluctuate between packing and machine operation, operate high speed technologically advanced manufacturing equipment and troubleshooting and basic repair.
  • Process included safely monitoring and adjusting machine operation from a main control panel.
  • Observed and monitored machine operations to detect malfunctions and made required adjustments.
  • Machine Operations Operating assembly line machine and maintaining maintenance of my equipment.
  • Observe machine operations to ensure quality and conformity to customer specifications.
  • Maintain complete records of engineering department activities, including machine operations.
  • Observed machine operation to detect evidence of malfunctions during production run.
  • Started machine operations by inserting control instructions into control units.
  • Fork lift operations loading and unloading trucks assembly and machine operation
  • Measured work piece dimensions to determine machine operation accuracy.
  • Perform machine operation and assembly of medical devices.
  • Observed machine operation to detect malfunction.
  • Machine operation and maintenance skills acquired.
  • Machine operation and general production.
  • Troubleshooted problems during machine operation.
  • Machine operation for metal fabrication.
  • General machine operations knowledge was required and unloading the diaper bundles from trailer using a forklift needed to be done.
  • Completed work orders, maintenance and up keep of machinery, worked closely with German Engineers to streamline machine operation.
  • General machine operations, setup and adjustment requirements, operate manipulator, input/collect data, load and start drying ovens.

Show More

30. Rail Cars

low Demand
Here's how Rail Cars is used in Operator jobs:
  • Packaged/labeled/sealed hazardous materials for shipping, monitored consoles, loaded/unloaded rail cars, made blends
  • Operate locomotive, switch and block together rail cars for outbound train, put away inbound train cars to various departments.
  • Performed safe handling, loading, and unloading of dry fertilizer into rail cars, tank barges and trucks following SOP.
  • Signed off and proficient for the setup, breakdown, steaming and offloading of crude oil rail cars at multiple racks.
  • Experience in directing cranes, loading, and securing heavy loads on rail cars up to and over 400 tons.
  • Rail load out operator loading and moving rail cars with required mixture at proper tonnage taking samples to ensure quality.
  • Inspect rail cars for hazardous materials and ensure that placards are clearly visible to identify product inside rail car 2.
  • Unload casing out of rail cars stack on ground or put on truck to be taken out to main yard.
  • Loaded and unloaded trucks and rail cars with formaldehyde and methanol, also helped with maintenance throughout the plant.
  • Operate Locomotive to move rail cars into positions to be weighed in and set up cars to be cleaned.
  • Load and offload tank trucks, pull samples for in bound and shipment Operate locomotive to switch rail cars.
  • Find out how much product the truck drivers wanted, operate the conveyor belts, load rail cars with fertilizer
  • Unhooked rail cars when they were empty while hooking up lines to the full rail cars to be distributed.
  • Change out grinding stones replacing grinding motors and cradles any basic knowledge of any issues with the rail cars
  • Scheduled and unloaded propane from delivery trucks to rail cars; scheduled two other personnel for duties.
  • Load oil into rail cars from trucks, maintain equipment, seal and inspect rail cars before shipment
  • Gauge, sample, and gather temperatures on shore tank, tanker trucks, and rail cars.
  • Operated Rail King to move rail cars after filling them with product to the pick track area.
  • Load truck frames on rail cars and flatbed trucks using forklifts, track mobiles and clamp truck.
  • Prepared rail cars for shipping product out of plant and operated loading system using computer loading software.

Show More

31. Track Hoe

low Demand
Here's how Track Hoe is used in Operator jobs:
  • Loaded trucks with dirt and dug flow lines and built berms using d5 s and skid steers and track hoes and rollers
  • Drilled, maintained, plugged oil wells * Extracted damaged flow lines using Track Hoe to repair or replace them.
  • Operated track hoes, excavators, rubber tire backhoes, 22 ton hydro crane in construction of water treatment facilities.
  • Operated anything from a roller to a track hoe, whatever job specified it by using proper equipment necessary.
  • Worked on heavy equipment such as trucks, tractors, track hoes, track loader, wheel loaders.
  • Secured documentation for deliveries and outgoing materials, held pipe for welders utilizing track hoe and forklift.
  • Worked Volvo long stick track hoe and Caterpillar 583 side boom and D6N bulldozer during creek/swamp restoration.
  • Work on the flood relief operating a 330 track hoe and a front loader and fork lifts.
  • Operated the track hoe with a brush cutter to mow the brush and did the maintenance.
  • Operated equipment including: Boring machine, Back hoe, track hoe and end loader.
  • Operated backhoe and track hoe to dig ditch for concrete converts and set them.
  • Operate and maintain service of Track hoe, Wheel loader, and Skid loader.
  • Operated bull dossier, motor grader and track hoe in preparation of roads and highways
  • Operated a back hoe and track hoe also an extended boom forklift.
  • Operated equipment such back hoe, track hoe and a loader.
  • Operate track hoe and side boom on tie-ins and clean-up.
  • Operate track hoe, clearing land digging ponds, loading trucks
  • Operate bulldozer, track hoe and tractors with dirt pans.
  • Operated track hoe to load trucks with oil base cuttings.
  • Operated track hoe moving dirt and breaking up concrete.

Show More

32. Computer System

low Demand
Here's how Computer System is used in Operator jobs:
  • Provided Subject Matter Expertise support on military BAT/HIIDE computer systems during exercises to validate training curriculum.
  • Reported and repaired any adverse conditions into the Infinity Computer systems every hour as issues occurred
  • Verify and receive materials into inventory by scanning materials into the appropriate computer system.
  • Operated computer system that recorded and inhibited target sequences for military soldiers target training.
  • Monitor diverse computer systems in Network Center environment, using Network monitoring tools.
  • Completed computers transactions of different materials in the computer system for warehouse inventory.
  • Operate all computer systems in accordance with established schedules and quality guidelines.
  • Performed requisition of lost items using computer system to locate misplaced material.
  • Record and control inventory of additive by inputting data into computer system.
  • Facilitated inventory management and recorded inventory counts in company computer systems.
  • Required to enter information in computer system and complete paperwork.
  • Utilized the company computer system to process telephone catalog orders.
  • Assist customers on making domestic and international calls through computer system
  • Operate plant computer systems with chemical transfers and monitoring operations.
  • Maintained and updated merchandise discrepancies in various computer systems.
  • Implemented and updated documentation in computer system.
  • Inventory of packaging item using computer system.
  • Entered and retrieved information to/from computer system.
  • Document all information in data computer systems.
  • Performed diagnostics using specialized computer systems.

Show More

33. Production Equipment

low Demand
Here's how Production Equipment is used in Operator jobs:
  • Mitigated any occurrence of performance issues between staff or within production equipment by leading investigations and root cause analysis procedures.
  • Operated production equipment and worked as control room operator monitoring and controlling process with computer system.
  • Managed and operated production equipment in accordance to best practices and standard operating procedures.
  • Generated production/safety reports and carried out monthly safety inspections of components on production equipment.
  • Maintained all production equipment including troubleshooting, repairs, preventive maintenance, calibrations.
  • Perform minor maintenance activities on production equipment as directed by the Operations Manager.
  • Disassemble production equipment clean and sanitize according to OSHA and company regulations.
  • Full mastery of all production equipment associated with maximum job performance.
  • Assisted in major and minor cleaning of pharmaceutical production equipment.
  • Monitored production equipment and adjusted to maximize quality and production.
  • Performed construction and demolition of offshore platforms and production equipment.
  • Trained in all positions related to operating production equipment.
  • Operate production equipment and assist machine technician.
  • Performed routine maintenance of production equipment.
  • Inspected and maintained production equipment.
  • Warehouse operator - packaging/production equipment.
  • Rigged equipment into and out of wells * Flowed wells threw separators while getting notes and monitoring tanks * Monitoring production equipment
  • Perform all duties associated with the set up of a variety of production equipment and related to produce quality parts.
  • Performed run product tasks on production equipment, operated reel to reel equipment and performed splices both automated and manual.
  • Set pipe up for welders, dig ditch and back fill, also set up production equipment for compressor pads.

Show More

34. PPE

low Demand
Here's how PPE is used in Operator jobs:
  • Oversee quality control while making sure products and materials are shipped according to specifications and standard operation procedure.
  • Operated a PLC equipped pneumatic molding press for platinum-cured silicone tubing manifolds.
  • Established and maintained strategic relationships with upper management of Avis Corporation.
  • Provided transportation for handicapped disabled patients to and from various locations.
  • Program and operate Wire/Sinker/Hole-Popper EDM machines using striker software.
  • Familiarized with company PPE policies and operating procedures.
  • Chopped salvageable lumber into winter firewood.
  • Have used laser scanner to scan product for staging area and to verify the amount of product being shipped to customer.
  • Perform all aspects of truck driving from driving to paperwork to customer relations with Shipper, Receivers and Brokers.
  • Operated lift equipped minibuses in a safe, efficient manner as required by company polices, and traffic laws.
  • Reviewed, monitored, prepared, and submitted daily, weekly, and monthly logistics reports to upper management.
  • Wrapped, sealed, weighed, affixed postage and dispatched all outgoing mail/packages in accordance with postal regulations.
  • Stack bundles onto a pallet, making sure that the boxes are aligned perfect to be shipped off.
  • Repair or replace defective garment parts such as pockets, zippers, snaps, buttons, and linings.
  • Started out with copper wire on reels that went into a tub of salter that coated the wire.
  • Matched and loaded orders for whole sale goods that were ready to be shipped to vendors for sale.
  • Use all equipment available (loader, excavator, hopper, and team) to maintain production quota
  • Maintained sulfur trains, hydrogen reactors, waste heat generators, fuel gas strippers, 650 lb.
  • Use a voice activated computer to pick and close out orders, and mark them as shipped.
  • Developed customers' films according to their request and ensured the finished product were shipped out properly.

Show More

35. High Volume

low Demand
Here's how High Volume is used in Operator jobs:
  • Monitored wafer product across machines and implemented required adjustments to equipment in high volume production facility.
  • Manufacture parts in a high volume environment in accordance with established quality and quantity standards.
  • Removed high margin-low volume units from high volume traditional manufacturing assembly line.
  • Performed all operational duties in a high volume production screening operation.
  • Assisted and participated in supervising high volume work production.
  • Performed various duties contributing to quality high volume production.
  • Worked in high volume medical production facility.
  • Answer high volume calls, schedule appointment, assist the office staff, medications authorization, Interpret/translate as needed, etc.
  • Facilitate in the operation of check depositing machines in order to process a high volume of incoming checks accurately and efficiently.
  • Handled high volume, inbound calls and had to minimize time of each call; handling about 125 calls an hour.
  • Operated packaging line equipment to ensure continuous runs; provide high volume supplies to packaging lines to support production operations.
  • Answered a high volume of calls and in-person inquiries; treated each person with respect and provided information and referrals.
  • Handled high volume incoming calls per shift in an expedient, efficient and courteous manner using the prescribed phraseology.
  • Operated the PBX accepting multiple high volume incoming calls, assisting outgoing calls, scheduling and setting wake-up calls.
  • Handled high volume sales with cash, credit and debit cards, balancing cash drawer at end of shift.
  • Answered a high volume of calls per day by addressing inquiries, solving problems and providing vital information.
  • Perform all tasks to process photographic film on continuous film processors in a high volume production environment.
  • Completed requests for personal and business locations and phone numbers in a high volume call center environment.
  • Produced high volume production with minimal waste and set-up time in order to maximize production efficiency.
  • Answered high volume of phone calls utilizing multiple phone line systems assisting hospital staff & patients.

Show More

36. Safety Meetings

low Demand
Here's how Safety Meetings is used in Operator jobs:
  • Performed regular equipment maintenance, Attended safety meetings to ensure proper performance was conducted on a regular basis.
  • Conducted safety inspections, followed safety rules for plant operations, and participated in safety meetings.
  • Attended daily safety meetings and adhered to company policy to insure protected working conditions.
  • Participated in monthly safety meetings and on some occasions daily safety meeting.
  • Participate in weekly toolbox safety meetings and document equipment safety.
  • Conduct safety meetings regularly to assure compliance with federal regulations.
  • Conduct safety meetings with contractors and operators daily.
  • Attended safety meetings to ensure daily operation safety.
  • Attend safety meetings and other safety-related training sessions.
  • Helped conduct safety meetings with relevant personnel.
  • Supervised safety meetings and performed safety inspections.
  • Conducted daily Safety Meetings with Platform Personnel.
  • Attended voluntary Month safety meetings.
  • Participate in daily safety meetings.
  • Facilitated daily shift safety meetings.
  • Participated in contractor safety meetings.
  • Led weekly and monthly safety meetings that ensured all staff used proper protection and complied with state and federal safety regulations.
  • Participate in daily and weekly (at beginning of each crew change) safety meetings as directed by supervisor.
  • Conduct safety meetings once a month for the department and assist any other department if work load was complete.
  • Complete JSA's, tailgate safety meetings, atmosphere testing, job tickets and permits for all jobs.

Show More

37. Different Types

low Demand
Here's how Different Types is used in Operator jobs:
  • Operated different types of machinery involved in making a variety of plastic containers.
  • Operated machinery which created different types of tubing according to customer specifications.
  • Utilized different types of machinery for efficient loading and unloading packages.
  • Job duties included: operating different types of machinery
  • Operated and maintained seven different types of machines that are used in the process of rolling flat steel into pipe.
  • Work with different types of parts for companies such as; Caterpillar, Trek Bikes, and many others.
  • Operated 4 different types of heavy machinery; pouring cement as well as relocating heavy objects with s forklift.
  • Experienced operator of different types of Aerial lifts such as; bucket trucks, Scissor lifts, and JLG.
  • Inspect different types of car door parts such as handles and caps, to assure they meet customer qualifications.
  • Operated three different types of plastics machines and made sure nothing went wrong to the machine or bringing bad products
  • Manufacture the different types of adhesives from a specific batch sheet, following the weights and additions precisely.
  • Used a wide variety of techniques in the development and unit testing of different types of software applications.
  • Experienced with different types of chokes, valves, other pieces that go with the production operators job.
  • Manage the storage and identification of incoming sheet stock, keeping different types of material organized and segregated.
  • Air spliced yarn in order to provide and produce heat treatment for different types of carpet production.
  • Manufactured different types of jet turbine engine blades of various size and different types of material.
  • Run equipment, loading, stacking utilizing different types of manual jacks, plus hydraulic jacks.
  • Side laying for all different types of plans at the company's and client's request.
  • Operate different equipment to produce different types of ingredients that go into products for infant nutrition.
  • Use cutting torches daily here so very good with them also know different types of metal

Show More

38. Inventory Control

low Demand
Here's how Inventory Control is used in Operator jobs:
  • Established and audited inventory control levels to ensure parts supply coincided with operational demands to minimize equipment down time.
  • Led the division in customer service, and implemented effective inventory controls that reduced food costs and increased profitability.
  • Generated accountability status report of parts, supply requisitions, sensitive items, and cyclical inventory control.
  • Manage computer inventory control systems and pipeline product movements to ensure accuracy and precision.
  • Organized and developed logs for the quarantine room insuring inventory control of non-conforming product.
  • Pulled material and maintained inventory controls by collecting stock location orders and printing requests.
  • Used various inventory control systems to insure proper inventory levels through third party warehousing.
  • Performed labor assignments, maintained job-site inventory control, and generated accurate records.
  • Utilized computerized programs to manage scheduling, inventory control and cost management.
  • Tracked operational status of all assigned facilities, maintaining positive inventory control.
  • Use of data entry into computerize inventory control system and inventory control.
  • Provided inventory control, inventory management, shelving, and home-deliveries.
  • Experience with inventory control, formulation and manufacturing process systems.
  • Performed inventory control procedures and quality control checks on product.
  • Provided Quality assurance and inventory control for multiple departments.
  • Conducted and maintained inventory control measures in service department.
  • Ensured inventory control by following company receiving procedures.
  • Ensured accurate inventory control through proper stocking procedures.
  • Performed production within established guidelines for production/inventory control.
  • Operate receiving processes including counting and inventory control.

Show More

39. GMP

low Demand
Here's how GMP is used in Operator jobs:
  • Championed incident investigation process and ensured compliance with necessary CGMP standards.
  • Enter inspection data using SAP* Monitor in-process live data* Inspect and operate mobile equipment* Work under GMP and OSHA regulations
  • Adhere to Good Manufacturing Practices (GMP) and Hazard Analysis and Critical Control Point (HACCP) policies.
  • Follow procedures to support GMP (Good Manufacturing Procedures) and document work services in an hourly Audit.
  • Ensured compliance with documented SOP s, GMP s and applicable safety standards per class 100 clean room.
  • Followed GMP, ISO 9001, and FDA to manufacture bio-processing disposals in a Class 100 Clean Room.
  • Batch record knowledge, SOP, GMP, EHS trained on and JDE knowledge for inventory purpose.
  • Conducted regular quality inspections to ensure compliance with Avon standards as well as GMP and FDA guidelines.
  • Lead and assist with implementation and training of all employees regarding the quality system and GMP regulations.
  • Understand and follow safety practices and policies to include GMP's, Safety Protocol and PPE's.
  • Follow all GMP's and SOP's and report to OSHA and other regulatory safety standards.
  • Use MHE to pick, verify and pack orders according to standard practice and GMP standards.
  • Comply with Good Manufacturing Practices (GMP s) and standard procedures (SOP's).
  • Scaled, labeled, and recorded all raw materials and batches in accordance to their GMP.
  • Conducted on-line quality inspections and ensured compliance with GMP's and FDA drug product manufacturing procedures.
  • Partner with QA to assure that production areas are GMP compliant by implementing monthly audit.
  • Perform Document Review and Product Verification Inspection (PVI) in compliance to GMP requirements.
  • Complete batch records in accordance with FDA and Good Manufacturing Practice (GMP) guidelines.
  • Designed and implemented a housekeeping inspection form to maintain production areas in appropriate GMP standards.
  • Comply with GMP'S, PPE requirements, SOP'S, and Quality Systems Regulations.

Show More

40. Customer Specifications

low Demand
Here's how Customer Specifications is used in Operator jobs:
  • Perform daily operation of injection molding machines Verify accuracy of documentation per work orders, machine programming, and customer specifications.
  • Adjusted machine feed and speed if machine malfunctioned and inspected finished products for quality and adherence to customer specifications.
  • Configure and operate packaging equipment to prepare iron and steel powder products for shipping according to customer specifications.
  • Document any additional chemicals or processes needed to make starch to customer specifications that are not outlined previously.
  • Monitored furnace activity, performed attrition tests, recorded data and packaged product according to customer specifications.
  • Performed quality assurance checks to ensure customer specifications were met with a superior product.
  • Perform laboratory testing of manufactured product to ensure quality and customer specifications are met.
  • Perform quality control checks of materials and finished products according to customer specifications.
  • Inspected materials for defects and ensured end product compliance with customer specifications.
  • Performed color calibration checks and made necessary adjustments to match customer specifications.
  • Ensured all work was completed according to customer specifications and quality procedures.
  • Audit ticket data for accuracy in accordance to customer specifications and constraints.
  • Perform extrusion control and operation of equipment as required by customer specifications.
  • Managed quality control to ensure all products met desired customer specifications.
  • Inspect and test completed products to verify conformance to customer specifications.
  • Monitor equipment to ensure product is produced to customer specifications.
  • Calculated the compositions and blended the products for customer specifications.
  • Analyzed final product to ensure quality control per customer specifications.
  • Preformed quality inspections to insure finished product met customer specifications.
  • Assured alignment was correct to meet company and customer specifications.

Show More

41. Hazmat

low Demand
Here's how Hazmat is used in Operator jobs:
  • Responded to 15 tractor trailer HAZMAT spills and 20 vehicle fires, securing the scenes until local fire HAZMAT teams arrive.
  • Loaded pallets onto wrap machine * Worked assembly line loading product onto pallets * Trained in HAZMAT * Maintained organization of equipment
  • Drive DOT vehicles over 10000 lbs and maintain CDL with HAZMAT endorsement and Tanker endorsement.
  • Maintained and operated a commercial unit with HAZMAT to and from different drilling rigs.
  • Complied with all OSHA and HAZMAT standards and performed other duties as required.
  • Completed HAZMAT training for spill clean-up and material handling for chemical processes.
  • Operated semi commercial vehicles in the Northeast region transporting HAZMAT products.
  • Job duties include: Maintain and track chemical and HAZMAT inventory.
  • Certified unit AFATDS operator, HAZMAT certifying official and fuel specialist.
  • Provide HAZMAT Emergency response at plant level.
  • Administered training to HAZMAT and Decontamination teams.
  • Complete all DOT and HAZMAT required paperwork.
  • Trained in spill response and HAZMAT.
  • Qualified to handle HAZMAT cars.
  • Fire, HAZMAT & Safety Training.
  • Prepare equipment for maintenance (LOTO) ERT/Fire Brigade/HazMat/Rescue/Safety Team Member
  • Participate in vehicle extractions for highway emergencies, fire emergencies, medical treatments, rescue operations, and hazmat emergencies.
  • Maintain Commercial Drivers License (CDL) Class A with valid Medical card, Hazmat, Tankers and Doubles/Triples Endorsements.
  • Received training qualifications in LOTO, THA Proficient, Hazmat and Decontamination, CPR, MSDS, and ALARA.
  • Served on emergency response team and attended quarterly medical, high angle rescue, Hazmat and AED training.

Show More

42. Control Room

low Demand
Here's how Control Room is used in Operator jobs:
  • Control room operator Utility operator Environmental specialists
  • Assist production control room operators in maintaining proper steam management, between utilities and production departments.
  • Worked as an operator in a highly automated control room producing a life-saving medicine.
  • Participated in daily online activities within Control Room involving costly and highly sensitive information.
  • Control room operator responsible for running Gas/Hydrogen plant at optimal conditions.
  • Communicate directly with Control Room Operators for conditions concerning issues.
  • Qualified journeymen power plant operator to include control room operations
  • Supervised control rooms and central control operations.
  • Control room operator supporting client operators.
  • Qualified central control room operator.
  • Control Room Operator and maintenance technician at a 38 MW coal/pet coke fired CFB boiler with an ABB/Stall VAX steam turbine.
  • Keep in contact with the Power Block control room to ensure feed is steady for uninterrupted fuel feed to the boilers.
  • Recorded reading on shift logs sheets, log book and process data inside the control room and in the field.
  • Preformed operator duties plan wide in the Control room, Sampling plant, Feed plant, and Ore Prep building.
  • Control room and compressor operator in a 300 T/D Anhydrous Ammonia plant with a 100 T/D CO2 plant train.
  • Qualified in the operation of all watches from Roving engineer, boiler tender turbine watch to control room engineer.
  • Operated the Control Room Simulator for the Initial License Operator class in preparation for the Nuclear Regulatory Commission Examination.
  • Conducted regular monitoring of all plant equipment and operation of both units from the field and control room.
  • Control room operator maintaining production records and overseeing the shift production line of seventeen grades of carbon black.
  • Learned to operate equipment using Allen Bradley control panels and WonderWare within the systems in the control rooms.

Show More

43. Product Quality

low Demand
Here's how Product Quality is used in Operator jobs:
  • Calculate and recommend modifications of existing product quality or production standards to achieve optimum production quality within limits of equipment capability.
  • Filter products utilizing validated techniques and equipment that prevents product contamination, minimize product loss and assure acceptable product quality.
  • Monitored and insure product quality, making whatever adjustments necessary to maintain the product specifications.
  • Perform to specified quality standards and comply with all relevant product quality procedures and requirements.
  • Conducted operational checks of ducts and other sheet metal installations to determine product quality.
  • Perform product quality inspections to ensure proper product quality to comply with product specifications.
  • Worked closely with Engineering to maintain and improve product quality by eliminating variability.
  • Inspected product by taking minute measurements to ensure product quality for continued processing.
  • Adjusted chemical formulas as needed to achieve outstanding product quality and production standards.
  • Maintained optimal system performance and product quality by communicating with Quality Control.
  • Monitor operation process to adjust process parameters to achieve targeted product quality.
  • Monitor manufacturing operations to ensure product quality and integrity is maintained.
  • Execute the required in-process product quality checks and documents accurately.
  • Maintained product quality by laboratory analysis on a daily basis.
  • Monitor final product for accuracy and product quality.
  • Perform critical adjustments to achieve optimal product quality.
  • Perform quality assurance to assure product quality.
  • Ensured product quality was maintained per customer specifications
  • Operate machine and insure product quality
  • Read specifications, use hand tools, tape measures and other gauging devices, to monitor current and ongoing product quality.

Show More

44. CPR

low Demand
Here's how CPR is used in Operator jobs:
  • Answered emergent/non emergent phone calls -Familiarity with geography of local city and counties -CPR certified -CAD usage for medical/fire/ems protocols as trained
  • Attended CPR classes and obtained certification
  • Completed certification for OSHA 10, forklift operating, man basket, CPR, and flagging.
  • Mounted wafer coming from TacProbe following information on tracker as how to be mounted.
  • Award and Honors: *CPR/AED Certificate * HIV/AIDS Self Study Certificate * Domestic Violence *
  • Handled accident/incident forms and have been trained in proper CPR and emergency first aide.
  • Provided instruction in training for the subject of Emergency Medical Technician, CPR.
  • Trained in CPR and emergency situation from the City of Gary, Indiana.
  • Provided patient care with administering medication, splinting limbs, CPR if necessary.
  • Certified in Adult and Pediatric First Aid/CPR/AED (American Red Cross).
  • Operated a scan truck Exxon Certified Chevron Certified CPR Certified H2S Certified
  • Trained on Rescue in derrick and first aid and CPR trained.
  • Obtain CPR card and operate wheelchair lift for patients as needed.
  • Have taken CPR, first aid, and defibrillator training.
  • Have been certified in: Forklift CPR First aid Skyjack
  • Provided CPR and first aid instruction during medical emergencies.
  • Obtained and maintain CPR and other specialized training.
  • Completed confined space, CPR, First Aid certification
  • Earned crane certification as well as CPR certification.
  • Advanced First Aid training including adult CPR.

Show More

45. Customer Orders

low Demand
Here's how Customer Orders is used in Operator jobs:
  • Review and fill customer orders from warehouse, checking availability and accuracy on computer terminal.
  • Machine operator, responsible for producing shipping list and filling customer orders efficiently and effectively.
  • Coordinated packaging of product for sterilization and final distribution according to customer orders.
  • Job responsibilities included picking items in specific locations for online customer orders.
  • Ensured timely process of customer orders, maintained equipment and monitoring processes.
  • Provided customer service and entered customer orders from telephone contacts - seasonal position
  • Generate customer orders using computer technology and also communicating through headsets.
  • Operated overhead cranes/forklifts* Operated CNC machines* Receiving* Pull customer orders
  • Ensured accurate and timely processing of customer orders.
  • Prepared customer orders effectively Handled money correctly
  • Pick position, I scan merchandise for customer orders or vendor returns and pick items to be sent to pack line.
  • Brief use of 10-key in the office setting to place customer orders into Cardinal's database to generate our product list.
  • Conducted daily inventory of the product needed to meet customer orders and pulled the material for up to sixteen lines.
  • Receive bulk coils of steel form barrages or trucks and process them into cut to length sheets per customer orders.
  • Filled customer orders by reviewing inventories on hand, and then calculating the amount of product to create.
  • Assisted with packaging of food products for shipment to ensure accuracy of inventory and customer orders.
  • Work involved local and international calls, problem solving, and the tracking customer orders.
  • Help customers with ordering devices, order status, and correct errors within customer orders.
  • Perform order routing - generate sales orders from customer orders for shipment of product.
  • Answered phones and took customer orders in a fast, friendly, efficient manner.

Show More

46. General Maintenance

low Demand
Here's how General Maintenance is used in Operator jobs:
  • Worked with several groups as a heavy equipment operator and general maintenance technician.
  • Cleaned packaging machinery parts and performed both preventative and general maintenance activities.
  • Perform routine and general maintenance to identify unusual conditions and malfunctioning.
  • Perform general maintenance on equipment and machinery as needed.
  • Performed general maintenance to include carpentry and masonry.
  • Perform preventative and general maintenance on heavy equipment.
  • Perform any general maintenance to maintain required specifications.
  • Performed a general maintenance of machine as necessary.
  • Performed general maintenance in maintained quality control.
  • General maintenance for equipment in my jurisdiction.
  • General maintenance and custodial services of restaurant.
  • General maintenance and inspection of emergency equipment.
  • Perform a variety of general maintenance activities.
  • Front End Loader*Sand Plant Operator General Maintenance
  • Performed general maintenance on manufacturing equipment.2.
  • Perform routine housekeeping and general maintenance.
  • Performed general maintenance on equipment.
  • Perform general maintenance and troubleshooting.
  • General maintenance automation trained extensively.
  • Conducted general maintenance on equipment.

Show More

47. Directory Assistance

low Demand
Here's how Directory Assistance is used in Operator jobs:
  • Offered national directory assistance to Verizon's customers and their partnered companies Assisted customers with obtaining information from a phone number
  • Processed directory assistance calls; looked up businesses and personal listing customers; provided excellent customer service.
  • Answered incoming callas providing directory assistance including phone numbers, addresses, and directions to various throughout Texas
  • Route incoming calls for toll-free directory assistance using computerized equipment while employing courteous customer service etiquette.
  • Provided directory assistance listings to customers in a professional, friendly and efficient manner.
  • Provided accurate, courteous, and professional service to customers requesting directory assistance.
  • Provided attentive and immediate customer service to 411 and directory assistance callers.
  • Provided customers with driving directions and telephone directory assistance timely and accurately.
  • Provided assistance with local, regional and national directory assistance calls.
  • Operated with computers to provide friendly accurate and efficient directory assistance.
  • Functioned as central office operators or as directory assistance operators.
  • Handled and directed callers for 411 directory assistance* Handled customer complaints
  • Functioned as a directory assistance representative for inbound nationwide callers.
  • Assisted customers within the Southern California region with directory assistance.
  • Worked in operator services in directory assistance covering East Florida.
  • Received inbound calls from customers requesting directory assistance information.
  • Provided directory assistance and maintained an organization phone directory.
  • Provided cellular directory assistance Provided enhanced services - i.e.
  • Performed Quality Assurance Analysis for directory assistance operators.
  • Provided enhanced directory assistance as requested by customers.

Show More

48. Water Truck

low Demand
Here's how Water Truck is used in Operator jobs:
  • Use of water truck, farm tractor and all attachments, crushers, and mixer trucks Flow Hand / Rig Hand.
  • Run water truck throughout the plant spraying down all roads accessible areas keeping dust levels down to a minimum.
  • Operated various equipment such as backhoe, excavator, water trucks, mini equipment, and loader.
  • Operated a front-end loader, haul truck, water truck, skid loader, and control tower.
  • Operated water truck and compactor * Passed compaction testing * Assist top man and assisted with pipe laying
  • Operate and maintain Haul Truck, Dozier, Grader, Water Truck, and various heavy equipment.
  • Operated heavy equipment such as a loader, skip loader, compactor, and water truck.
  • Operated a train, water truck, sweeper, fork lift, and front end loader.
  • Unload brine water trucks, filter water, operated skid steer, power wash unloading bays.
  • Operate various CDL trucks such as Distributor Tack Truck, Water Truck and Dump Truck.
  • Labor hand, I coordinate water trucks, belly dumps, and sign material tickets.
  • Operate machinery, water truck, belly dump and bobtail (on location only).
  • Operated bulldozer, backhoe, loader, grader, compactor, and water truck.
  • Operated Caterpillar off-road dump truck, water truck and Caterpillar Rubber tire vibrating compactor.
  • Used water truck to water down dusty roads and fuel truck to fuel equipment.
  • Operated heavy machinery like Mini Excavator, Skid Steer and a water truck.
  • Started on water truck moved to loader takeaway worked on rail load out.
  • Operated a water truck providing dust control on roadways and work areas.
  • Operate forklifts, water trucks, front end loaders, and sometimes grader
  • Operated a d4, front end loader, water truck and excavator.

Show More

49. ISO

low Demand
Here's how ISO is used in Operator jobs:
  • Communicate and report status of equipment maintenance related issues to the area supervisor/manager and assist with actions necessary to resolve issues.
  • Monitored machines during every procedure to ensure optimum running performance, and provided relevant information regarding process to supervisor.
  • Coordinate with boiler control operator or direct supervisor for temperature changes or needed adjustments and repairs.
  • Perform document register reconciliations and submits daily supply activities requisitions cost expenditures to the Shop Supply Supervisor
  • Maintain proper safety conditions of equipment including immediately correcting or reporting safety issues to my supervisor.
  • Communicate with other zone operators, assistant supervisor and split rack supervisor regarding any product issues.
  • Communicate effectively with all supervisors and managers to ensure day to day operations run smoothly.
  • Regulate or shut down equipment during emergency situations as directed by supervisory personnel.
  • Coordinated and supervised eight operators and five computer systems in Supervisor's absence.
  • Report conditions to supervisor and or safety coordinator if any hazards exist.
  • Coordinate with production supervisor or quality control technician on manufacturing process specifications.
  • Documented daily equipment inspections and submitted daily inspection forms to supervisor.
  • Analyzed and investigated all incidents alongside functional management and security supervisors.
  • Recognized by supervisors and peers for efficiency and exemplary performance.
  • Report all operational deficiencies to supervisor and maintenance personnel.
  • Notified supervisor immediately about equipment problems and breakdowns.
  • Followed production instructions of supervisor to ensure quality.
  • Reported threw supervisor of daily activities on location.
  • Relayed information between supervisors and assembly line operators.
  • Developed energy control plans for equipment/unit isolation.

Show More

50. Production Goals

low Demand
Here's how Production Goals is used in Operator jobs:
  • Ensured daily production goals were achieved, utilizing approved Operational practices and conforming to all Government and Company policies and regulations.
  • Received company commendation with department staff members for exceeding production goals during period immediately following new equipment implementation.
  • Conducted preventive measures to keep tools running efficiently and performed corrective adjustments when needed to optimize production goals.
  • Operated the offshore production facility to maximize daily production goals in accordance with Client requirements.
  • Inspect and process product while meeting production goals on a daily basis to count, sort, and package products carefully.
  • Worked as part of a crew that was commended for exceeding established pellet production goals for 3 consecutive months.
  • Performed routine machine cleaning and maintenance to ensure high quality and quantity of work produced, meeting production goals.
  • Ensured quality specifications of wafer component of the micro chips; and set monthly production goals for the team.
  • Supervised over multiple people to ensure daily production goals where achieved in a safe and timely manner.
  • Assisted in successful fill operations - keeping compliant with the set processes/guidelines established and meeting production goals.
  • Meet production goals through timely changeover and proper set up of injection molds and work stations.
  • Worked as a team to build and assemble engines and meet daily and weekly production goals.
  • Distributed workload among six employees, prioritizing tasks as needed and ensuring production goals were met.
  • Planned and paced work efficiently in order to meet daily, weekly, or production goals.
  • Inspect the product to ensure its quality and comply with all quality and production goals efficiently.
  • Maintain cut up machinery, keep my department sanitary, maintain quality and production goals,
  • Manage the daily operation of the formaldehyde plant and ensure scheduled production goals are met.
  • Trained and experienced in forklift operation as well as focused on quality and production goals.
  • Performed maintenance tasks to support department safety, environment, quality, and production goals.
  • Worked with multiple departments to meet and/ or exceed production goals to supply multiple sites.

Show More

20 Most Common Skill for an Operator

Safety Procedures16.6%
Customer Service11.6%
Heavy Equipment9.3%
Daily Operations7.2%
Emergency Situations6.6%
Preventative Maintenance5.5%
Data Entry4.3%
Phone Calls3.7%

Typical Skill-Sets Required For An Operator

RankSkillPercentage of ResumesPercentage
1
1
Safety Procedures
Safety Procedures
11.8%
11.8%
2
2
Customer Service
Customer Service
8.3%
8.3%
3
3
Heavy Equipment
Heavy Equipment
6.6%
6.6%
4
4
Daily Operations
Daily Operations
5.1%
5.1%
5
5
Emergency Situations
Emergency Situations
4.7%
4.7%
6
6
Preventative Maintenance
Preventative Maintenance
3.9%
3.9%
7
7
Data Entry
Data Entry
3%
3%
8
8
Phone Calls
Phone Calls
2.6%
2.6%
9
9
Dozer
Dozer
2.6%
2.6%
10
10
Assembly Line
Assembly Line
2.5%
2.5%
11
11
Trouble Shooting
Trouble Shooting
2.4%
2.4%
12
12
Backhoe
Backhoe
2.2%
2.2%
13
13
Set-Up
Set-Up
2.2%
2.2%
14
14
CNC
CNC
2%
2%
15
15
Dump Truck
Dump Truck
2%
2%
16
16
Quality Standards
Quality Standards
1.9%
1.9%
17
17
Osha
Osha
1.9%
1.9%
18
18
Quality Checks
Quality Checks
1.9%
1.9%
19
19
Raw Materials
Raw Materials
1.8%
1.8%
20
20
Front End Loader
Front End Loader
1.7%
1.7%
21
21
Hand Tools
Hand Tools
1.7%
1.7%
22
22
Frac
Frac
1.6%
1.6%
23
23
Pallet Jack
Pallet Jack
1.6%
1.6%
24
24
Bobcat
Bobcat
1.5%
1.5%
25
25
Unload Trucks
Unload Trucks
1.4%
1.4%
26
26
Job Site
Job Site
1.4%
1.4%
27
27
CDL
CDL
1.3%
1.3%
28
28
Sort
Sort
1.3%
1.3%
29
29
Machine Operation
Machine Operation
1.3%
1.3%
30
30
Rail Cars
Rail Cars
1%
1%
31
31
Track Hoe
Track Hoe
0.9%
0.9%
32
32
Computer System
Computer System
0.9%
0.9%
33
33
Production Equipment
Production Equipment
0.9%
0.9%
34
34
PPE
PPE
0.9%
0.9%
35
35
High Volume
High Volume
0.8%
0.8%
36
36
Safety Meetings
Safety Meetings
0.8%
0.8%
37
37
Different Types
Different Types
0.8%
0.8%
38
38
Inventory Control
Inventory Control
0.8%
0.8%
39
39
GMP
GMP
0.8%
0.8%
40
40
Customer Specifications
Customer Specifications
0.7%
0.7%
41
41
Hazmat
Hazmat
0.7%
0.7%
42
42
Control Room
Control Room
0.7%
0.7%
43
43
Product Quality
Product Quality
0.7%
0.7%
44
44
CPR
CPR
0.7%
0.7%
45
45
Customer Orders
Customer Orders
0.7%
0.7%
46
46
General Maintenance
General Maintenance
0.7%
0.7%
47
47
Directory Assistance
Directory Assistance
0.6%
0.6%
48
48
Water Truck
Water Truck
0.6%
0.6%
49
49
ISO
ISO
0.6%
0.6%
50
50
Production Goals
Production Goals
0.6%
0.6%

30,268 Operator Jobs

Where do you want to work?