Operator jobs in League City, TX - 700 jobs

Work days/Shift Hours - if applicable: 5:00 PM until finished / 5 days a week. Compensation: Starting pay ranges from $18.00 to $22.00 per hour, based on experience. Additional earning opportunities may include performance-based incentives, quarterly bonuses, referral bonuses, and comprehensive benefits. Additional Relevant Information: General Purpose Responsible for moving product or materials in a production or warehouse environment using powered tools and vehicles. Duties and Responsibilities Operate industrial vehicles and equipment. Transport raw materials, full goods and/or finished goods to designated area. Load and unload designated trailers and/or route trucks. Ensure compliance with regulatory and company policies and procedures. Move product and/or materials manually as required. Qualifications High School or GED preferred. 0-3 years of general work experience required. 1+ years prior warehouse/stocking/forklift experience preferred. Previous experience within high-speed industrial environment a plus. Ability to operator a manual/powered pallet jack or lift product. Demonstrated attention to detail. Forklift certification is required. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain Texas or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on Coca-Cola Southwest Beverages. Please inform us at if you need assistance completing this application or to otherwise participate in the application process. Know Your Rights dol.gov Coca-Cola Southwest Beverages LLC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class.

* Operates various power-driven machinery used to move dirt or other materials. * May operate all or some of the follow types of equipment: excavator, backhoe, bulldozer, crane, dragline, font-end loader, motor grader, cherry picker, dump truck, etc. RESPONSIBILITIES: * Sets up and operates production equipment in accordance with established guidelines and procedures. * Adjust machine settings to complete tasks according to specification, accurately and in a timely manner. * Move hand and foot levers to control diesel, electric, gasoline or steam-powered operating equipment. * Interprets hand signals to determine where materials are to be placed. * May be required to manipulate equipment on unlevel working surface. * May assist in lifting, position and securing or materials and work pieces during installation. * May be responsible for routine maintenance or repairs. * Responsible for observing and complying with all safety and project rules. * Performs other duties as required. QUALIFICATIONS: * May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. * Has knowledge of commonly-used concepts, practices, and procedures within a particular field. * Relies on instructions and pre-established guidelines to perform the functions of the job. * Works under immediate supervision. * Primary job functions do not typically require exercising independent judgment. * Typically reports to a supervisor or manager. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development. Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. LONG TERM MAINTENANCE PROJECT - NO PER DIEM JOB REQUIREMENTS: * Observes load hook up and determines safety of load. * Manipulates crane control to regulate speed and direction of crane and hoist movement according to written, verbal or signal instructions. * Understand and follow all industry recognized signals and rigging practices * Cleans and maintains crane and hoisting mechanism. * Inspects crane for defective parts, documents and notifies the supervisor of the defects or malfunctions. * Loads, transports, and unloads materials, tools, equipment and supplies. * Performs minor maintenance or cleaning activities on tools and equipment. * May be required to interpret load charts. QUALIFICATIONS: * NCCCO Certified * May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. * Has knowledge of commonly-used concepts, practices, and procedures within a particular field. * Relies on instructions and pre-established guidelines to perform the functions of the job. * Works under immediate supervision. * Primary job functions do not typically require exercising independent judgment. * Typically reports to a supervisor or manager. PHYSICAL REQUIREMENTS: 1. Strength: a. Standing 5% Walking 5% Sitting 90% b. Lifting 10 lb. Carrying 10 lb. Pushing 50 ft-lb. Pulling 50 ft-lb. 2. Climbing O Balancing O 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLS: NP Not Present; O Occasionally (0-33%); F Frequently (34-66%); C Constantly (67-100%) BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development. Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

Journeyman-level or equivalent experience in heavy equipment operation Minimum 3-5 years of recent, relevant industry experience operating multiple types of heavy equipment. High school diploma or equivalent; associate's degree or higher preferred Valid driver's license; CDL Class A preferred or required for some positions Preferred Education/Training/Experience Previous teaching or supervisory experience Computer literacy and ability to use instructional technology Experience with equipment maintenance and minor repairs Minimum Knowledge & Skills Maintain training equipment and ensure it is safe and operational; report or perform minor repairs as needed Coordinate and manage classroom/lab activities, ensuring a clean and organized learning environment. Stay current with industry trends, equipment technology, and regulatory requirements Preferred Knowledge & Skills Ability to develop and implement lesson plans, instructional materials, and assessments in accordance with industry Demonstrate and supervise the proper use of equipment, emphasizing safety procedures, PPE, and OSHA regulations Participate in curriculum development, program improvement, and professional development activities Job Duties Instructor is responsible for teaching and training students in the safe and effective operation of heavy equipment such as bulldozers, excavators, loaders, backhoes, and related machinery. The instructor develops and delivers curriculum, ensures compliance with safety standards, and prepares students for industry certifications and employment Licensing/Certification Requirements National Commission for the Certification of Crane Operators (NCCCO) Specialized Equipment Certifications Technical Skills Assessment Program (TSAP) Certification Forklift Operator Certification Physical Requirements Instructors should be physically capable of operating equipment, performing demonstrations, and assisting students in a hands-on setting Operators must be able to exert 50-100 pounds of force occasionally, 25-50 pounds frequently, and 10-20 pounds constantly to lift, carry, push, pull, or move objects such as tools, equipment parts, and construction materials The job requires frequent bending, stretching, twisting, reaching, and climbing in and out of machinery Operators must be able to move through a full range of motions and maintain balance and coordination while operating equipment, sometimes on rough or uneven terrain Heavy machine operators must be physically fit to endure strenuous work, including standing, walking, or sitting for long periods, and working in extreme weather and challenging environments Excellent hand-eye and foot coordination are necessary for manipulating multiple controls, steering, and operating various machines safely and efficiently Fine and firm grasping, as well as the ability to make fast, repeated movements, are required The role often involves exposure to vibration, noise, dust, and outdoor elements, as well as occasional risks from working around moving equipment and hazardous materials Posting Detail Information Posting Number F273P Candidates that are eligible apply Internal/External Special Instructions to Applicant Minimum Salary Range $48.75/hr Mid Point Salary Range $48.75/hr Maximum Salary Range Posting Open Date 05/21/2025 Posting Close Date Open Until Filled Yes Quick Link for Direct Access to Posting ********************************** EEO Statement College of the Mainland is an affirmative action/equal opportunity institution and does not discriminate on the basis of race, color, sex, age, national origin, religion, disability or veteran status. College of the Mainland does not discriminate on the basis of disability in the recruitment and admission of students, the recruitment and employment of faculty and staff, and the operation of its programs and activities, as specified by federal laws and regulations within Section 504 of the Rehabilitation Act of 1973 and the Americans with Disabilities Act of 1990 and 1992.

Job Description AERONES, a Global Leader in advanced Wind Turbine maintenance and robotics, is seeking a Wind Turbine Robotics Operator focused on Robotics services to join our U.S. Operations Team. This position is also known as Wind Field Technician. We specialize in cutting-edge robotic solutions that ensure safety, efficiency, and top-tier service for the wind energy industry. In this role, you'll have the opportunity to travel to wind farms across the country, with all accommodation and travel expenses fully covered by the Company. You will be performing inspections, maintenance, repairs, and upgrades on wind turbines - ensuring peak performance and safety standards are met. GWO Basic Safety Training (BST) and GWO Advanced Rescue Training (ART) Full certifications will be required to undertake the role. Job Tasks and Responsibilities: Maintenance and operation of robotic systems used for cleaning, inspection, and repair of wind turbines. Performing routine inspections on turbines to ensure optimal performance and compliance with safety standards. Preventative maintenance on wind turbines and associated systems to reduce downtime and maximize energy production. Fault diagnosis and resolution of technical issues using advanced diagnostic tools and technology. Reporting and documentation of work completed, including identifying issues, repairs, and maintenance performed. Ensuring adherence to safety protocols and industry standards. What We Offer: Stable, long term employment with career growth in a rapidly expanding, innovative Company Competitive hourly rate: $22.50 - $30.00 per hour (based on experience) $60 a day meal per diem Paid travel and lodging for Projects nationwide Work with a Global Team pioneering the future of wind turbine technology What We're Looking For: Strong mechanical and electrical troubleshooting skills Ability to travel frequently and work in Field conditions Previous experience in wind turbine maintenance is an advantage Requirements The minimum requirements to be considered for this role include: Applicants must be legally authorized to work in the United States. We are unable to sponsor Visas at this time. A Valid Drivers License Basic Computer skills Willing and able to undertake a Physical Check (Medical) to ensure ability to undertake the responsibilities of the role (working in confined spaces, climbing, lifting etc). Nice to have: GWO Basic Safety Training (BST) GWO Advanced Rescue Training (ART) Full GWO Basic Technical Training (BTT) OSHA 10 NFPA 70E Electrical safety awareness First Aid GE / Vestas / Siemens Gamesa / Nordex Turbine Operations / LOTO GWO Sea Survival Benefits We believe great work starts with feeling valued and supported. That's why we are building an thoughtful, competitive benefits and perks to help you thrive - professionally and personally - through every step of your Career with us. You will be eligible for: Health Insurance Medical (80% Employer contribution) Dental Vision Term Life Paid Time Off (PTO) - 10 days Aerones is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and consider all qualified applicants for employment without regard to Race, Color, Religion, Sex, Sexual Orientation, Gender Identity or Expression, National origin, Age, Disability, Veteran Status, or any other legally protected status. Employment decisions are based on qualifications, merit, and business needs. AERONES - Build the Future!

Duties and responsibilities include, but are not limited to: Shipping documentation handling: upon receipt of shipping notices and documents from shipper and/or freight forwarder cross check against purchase orders in the system and work on revision as needed Custom clearance preparation: submission of shipping documents to custom broker for correction and timely entry filing. Harmonized tariff schedules must be checked and verified with custom broker and other resources as well as other information that goes on duty entries. Payment process: processing of various types of payments such as imported merchandise, freight, inland trucking, duty to US Custom and other direct costs. Folder/Journal management: all transactions and payment related documents for all shipments must be timely filed and managed. Managing activities related to trading between different regions and/or countries. Logistics coordination for smooth operation matching up purchases with sales Communication with customers and follow up on request accordingly Purchase/Sales data input to ERP(SAP) system Credit management for customer Perform all other functions requested that are within the scope of this job as deemed necessary or appropriate by manager. Other duties as assigned Duties and responsibilities include, but are not limited to: Shipping documentation handling: upon receipt of shipping notices and documents from shipper and/or freight forwarder cross check against purchase orders in the system and work on revision as needed Custom clearance preparation: submission of shipping documents to custom broker for correction and timely entry filing. Harmonized tariff schedules must be checked and verified with custom broker and other resources as well as other information that goes on duty entries. Payment process: processing of various types of payments such as imported merchandise, freight, inland trucking, duty to US Custom and other direct costs. Folder/Journal management: all transactions and payment related documents for all shipments must be timely filed and managed. Managing activities related to trading between different regions and/or countries. Logistics coordination for smooth operation matching up purchases with sales Communication with customers and follow up on request accordingly Purchase/Sales data input to ERP(SAP) system Credit management for customer Perform all other functions requested that are within the scope of this job as deemed necessary or appropriate by manager. Other duties as assigned Candidate Specification Minimum Education: Bachelor (preferred) Language Requirements: English & Korean (conversational) Qualified candidates must have: 2~5 years of experience in Shipping Documentation (Chemical preferred) High level of accuracy, attention to detail and ability to prioritize multiple tasks in a fast-paced environment Ability to interact and communicate clearly and professionally with coworkers and customers Good organization skills Hiring Status

Job DescriptionDescription: The Robot Operator is responsible for setting up and operating robotic welding equipment according to established procedures. This role requires interpreting blueprints and drawings, adjusting robot settings to specifications, and ensuring accurate, quality production. Essential Responsibilities: Review work orders and shop drawings to confirm dimensions and material availability Set up workstations, fixtures, and robotic welding equipment Perform dry runs on initial pieces to verify accuracy Operate the robotic welding system to complete production jobs Inspect completed work and sign off on operations Requirements: Knowledge, Skills & Abilities Ability to read and interpret shop drawings Basic math skills and experience using measuring tools Familiarity with robotic welding equipment Strong focus on quality and productivity Ability to organize, prioritize, and manage multiple tasks Effective verbal and written communication skills Ability to stand for extended periods Ability to lift, push, and pull up to 25lbs unassisted Work Environment Typical machine shop environment Willingness to work additional hours as needed Willingness to be cross trained on multiple machines Minimum Qualifications High school diploma or GED Experience in a shop environment with robotic and plasma cutting equipment Familiarity with robot control panels; forklift and overhead crane experience preferred -------------------------------------------------------------------------------------------------------------------------------------------------- At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job - you gain access to a range of benefits designed to promote your well-being, growth, and financial security. Health, dental and vision insurance 401K with company match Life Insurance Flexible Spending Accounts Generous annual time off policy 12 Company-Paid holidays A Solid Wellness Program to support your personal health goals Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company - APPLY TODAY! ------------------------------------------------------------------------------------------------------------------------------------------ We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Join Our Team: Equipment Operators Wanted - Houston, TX Primoris Heavy Civil is looking for experienced Equipment Operators to support our growing operations in the Houston, TX area. This is your opportunity to work on meaningful infrastructure projects with a company that values safety, skill, and teamwork. As an Equipment Operator, you'll be responsible for the safe and efficient operation of machinery such as plows/trenchers, backhoes, excavators, skid steers, bulldozers, and front-end loaders. Your expertise will help keep projects on schedule and deliver results that meet the highest standards. Bring your experience. Build your future. Apply today and grow with Primoris Heavy Civil! JOB DESCRIPTION Operators are responsible for the safe and efficient operation of heavy equipment-including plows/trenchers, backhoes, excavators, skid steers, bulldozers, and front-end loaders-to support construction and project-related activities. QUALIFICATION STANDARDS Operate heavy equipment-including plows/trenchers, backhoes, excavators, skid steers, bulldozers, and front-end loaders-safely and efficiently to support construction activities. Perform daily equipment inspections to ensure safe operation and report any issues or required repairs. Conduct basic maintenance on equipment such as greasing, lubrication, and fluid checks. Follow site-specific safety protocols and company procedures at all times. Collaborate with site supervisors and crew members to meet project goals and schedules. Read and interpret grade stakes and project specifications as needed for accurate operation. Adapt to various weather conditions and physically demanding work environments. Work independently while maintaining a team-oriented, safety-focused mindset. Perform other duties as assigned, including labor tasks when equipment is not in use. PHYSICAL AND SAFETY REQUIREMENTS Must comply with company drug and alcohol policy and pass any required physical exams. Able to lift and carry up to 50 lbs (assistance recommended for heavier loads). Work extended hours on foot, including on uneven or rough surfaces. Climb ladders, kneel, crawl, or work at heights and in confined spaces. Must be able to hear and distinguish emergency signals and instructions while on duty WORK ENVIROMENT Location: industrial construction sites and/or fabrication shop Mobility Barriers to Access Job Site: Uneven ground level Obstructed pathways Work performed at low and/or high elevations Work performed in confined areas Climatic/Environmental Conditions at Job Site: Predominately outdoor climate May be exposed to extreme hot or cold weather Excessive humidity, rain, etc. Various noise levels caused by tools, machinery, equipment, etc. Potential exposure to chemical substances BENEFITS Competitive compensation paid weekly Best-in-class; Medical, Dental, Vision, and LTD/STD 401(k) with company match, vested day-one Employee Stock Purchase Plan [ESPP] Tuition Reimbursement Pet Coverage "For our Furry Friends" Legal Assistance Coverage Award winning safety programs COMPANY OVERVIEW Primoris was formed in 2004 as the parent company and is traded on the NYSE under the symbol PRIM. We provide a wide range of construction, maintenance, and engineering services for power generation, oil and gas, chemical, pipeline, utilities and distribution, and civil infrastructure clients. Primoris is ranked in the top 1% of the prestigious Top 600 Specialty Contractors List by Engineering News-Record (ENR), having built projects throughout the U.S. and Canada. For additional information, please visit ************* Primoris Heavy Civil, supported by the bonding capacity and resources of Primoris, has expanded into an even larger role within the heavy civil, infrastructure rehabilitation and transportation industries. Heavy Civil provides highway, port, airfield, rail and marine (intermodal transportation) construction services to private commercial and industrial clients as well as governmental entities such as the Department of Transportation and the US Army Corps of Engineers. Heavy Civil is comprised of six operating units that include North Louisiana Operations, South Louisiana Operations, Texas Operations, HMA Paving Operations, Concrete Paving Operations, and the Infrastructure Rehabilitation Unit. AGENCY STATEMENT We are not accepting resumes from Third Party Recruiting Firms for this position. If you are an Agency or Search firm representative, contact the Primoris Talent Acquisition Manager directly for consideration. Primoris or its subsidiaries will not be responsible for any fees arising from the use of resumes and online response forms through this source. In addition, Primoris or its subsidiaries will not be responsible for any fees on unsolicited resumes that are submitted to any member of the Staffing or Operations team. Primoris has established an approved vendor program for this service and will only consider accepting submissions from those approved firms. For consideration in becoming an approved vendor, contact HR. #LI-IG1

USALCO La Porte is a major unit within the manufacturing network of a leading provider of aluminum-based component products used in water treatment, pulp and paper manufacturing, and other sectors. The right individual will have a can-do attitude, the ability to be part of a team while operating independently, and consistently performs to very high standards. JOB SUMMARY: The person in this role is responsible for packaging, labeling and loading manufactured products while assuring compliance is achieved in all company associated policies. The position requires a motivated, detail oriented, and results driven team player who: Incorporates safety and quality into every decision while performing day-to-day activities Effectively communicates with Supervisor and peers Shift work and weekend work may be required Can efficiently package and load manufactured products Can operate a fork truck to unload and load raw materials and finished products Will actively seek out opportunities for process improvement and take full responsibility for collaborating with management and peers to implement approved changes in a timely manner. The employee in this position will be a positive-natured, task-oriented individual with material handling experience and significant mechanical aptitude. The Material Handler is responsible for the safe and efficient loading of manufactured products. The person must possess excellent communication skills necessary to keep Supervisor and peers informed of scheduling and order completion. This person must be personally and professionally motivated to work constructively with team members at all levels within the company, to execute job responsibilities ROLES AND RESPONSIBITIES: Apply all plant safety rules, work guidelines / practices, and procedures Overseeing the safe and efficient operation of the plant equipment. Wearing and maintenance of personal protective equipment required for working with hazardous chemicals Developing and applying improvements in processes, equipment, and procedures Daily Responsibilities: Complete walk-through of the plant and equipment to audit safety/housekeeping Assist in loading/unloading trailers with products Unload raw materials as needed Complete blends as needed Follow all batch sheets Complete Certificates of Compliance for loaded trailers Complete all paperwork accurately including batch sheets, packaging counts and bills of lading Maintain and communicate information with the other shifts Provide support to Plant operations as needed Maintenance Complete MaintainX work requests for maintenance issues Inspect plant equipment daily and report any issues to Supervisor Must be able to work overtime, provide physical labor and work changing shifts as required to meet business requirements. Perform other duties as assigned in support of business goals and objectives. MINIMUM QUALIFICATIONS: KNOWLEDGE AND SKILLS Requires planning skills to prioritize daily packaging requirements Must be able to pay attention to detail Knowledge of general manufacturing equipment and forklift operation Must be dependable, flexible, and able to respond on short notice to satisfy requirements of customers. The ability to communicate with others clearly and succinctly, both verbally and in written form. Ability to utilize and perform minimal computer tasks Microsoft Office EDUCATION: A High School Diploma or GED EXPERIENCE: Chemical, Pharmaceutical or Food manufacturing environment, preferred ESSENTIAL FUNCTIONS: The Ability to: Must be able to obtain Forklift License through USALCO within 14 calendar days of being hired. Routinely lift 50 to 75 lbs. throughout the shift Routinely stand 60 to 70% of shift Routinely must traverse ship ladders, catwalks and close quarters USALCO is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. As a general policy, USALCO does not offer employment visa sponsorships upon hire or in the future.

Location: Accuseal Houston, TXShift Days/Hours: 1st shift Monday - Friday 6:00 am - 2:30 pm. /OBJECTIVE: To Prep billets on a lathe for the CNC department. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the Essential functions. Set up a machine to Prep the billets on the face, and groove, turn down O.D and I.D. Control inventory. Inspect goods. Implement and practice Lean Manufacturing tools including 5S, to increase productivity, and eliminate waste. Assist in cross-training. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by the lead or supervisor. Other Requirements Must be able to learn basic computer skills. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to work in an environment with various temperatures. Required Education and Experience: High school diploma or equivalent. Must have 6 months to 1 year of work-related experience or be qualified by certification. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 50 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit, and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand.

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. The Loader Operator will be responsible for moving and loading vehicles with a company-provided front-end loader or forklift. In addition, the Loader Operator will be required to maintain documentation of vehicle movement around the facility. Furthermore, the Loader Operator will be responsible for the daily pre and post-trip inspections and associated documentation of their assigned machine. In addition, the operator will maintain a safe work environment and be required to follow and be held accountable to company guidelines for safe loader operation. Finally, through a thorough understanding of Copart policy, the Loader Operator will facilitate the Copart experience by offering solutions to meet customers' needs. Ensures equipment is maintained according to company standards and customer contracts. Operates company equipment safely. Assists with the maintenance of company equipment and vehicles. Records vehicle information accurately and legibly. Operates digital camera or other basic vehicle documentation and tracking devices. Sets up yard for auctions within company timelines. Provides service to customers as needed. Maintains a positive and professional demeanor. Follows yard guidelines to maintain a safe working environment (i.e. speed limits, etc.). Must be able to load and unload vehicles as required. Must be able to pass training and safety requirements. Performs other duties as assigned. Required Skills & Experience: HS diploma or GED preferred. At least two years of work experience, preferably in an outdoor environment. One year of loader or forklift experience, certification preferred. Excellent customer service attitude and skills. Excellent communication skills, written and verbal. Positive attitude/High Integrity. Ability to operate heavy equipment. Must be able to multi-task in a fast-paced environment. Strong attention to detail. Occasional O.T. as needed. Bilingual skills a plus. Benefits Summary: · Medical/Dental/Vision · 401k plus a company match · ESPP - Employee Stock Purchase Plan · EAP - Employee Assistance Program (no cost to you) · Vacation & Sick pay · Paid Company Holidays · Life and AD&D Insurance · Discounts Along with many other employee benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: E-verify Participation Right to Work

Job Description The City of Pearland, TX is seeking to hire a full-time Heavy Equipment Operator- Drainage to help improve aspects of the day-to-day operations of our Engineering & Public Works Department. Are you service-oriented? Could you excel in a fast-paced environment? If so, you may be perfect for this position! The Heavy Equipment Operator- Drainage earns a competitive salary of $20.79 - $22.50 /hourly based on qualifications. Additionally, the city pays all premiums for our employees' dental, long-term disability protection, and life insurance plus the majority portion of the medical premium for employees and their dependents. We also offer a retirement plan through the Texas Municipal Retirement System (TMRS) with a 2:1 employer match, life insurance, disability, access to the city's recreation fitness center, employee assistance program, educational assistance, 11 paid holidays and 2 designated paid holidays, paid vacation, sick leave, and an active wellness program focusing on physical, mental, and financial health. ABOUT THE CITY OF PEARLAND Pearland is one of the fastest-growing cities in Texas due to affordable housing, outstanding schools, safe neighborhoods, and superb quality of life. Ranked among the top ten safest cities in Texas, Pearland residents know their families are safe and secure in the community and surrounding areas. Our close proximity to Houston, just a short 20-minute drive to downtown, allows residents to experience all the city has to offer, including professional sports, world-class cultural amenities, and recreation. Employees of the City of Pearland use multi-directional communication and cross-functional teams to promote a greater understanding of the organization by employees at all levels. We have created a culture of continuous learning that encourages and supports employee development and growth. Our work environment is one where innovation is not only supported but encouraged. A DAY IN LIFE AS A HEAVY EQUIPMENT OPERATOR- Drainage Job Summary: Under general supervision, drives truck and operates motorized equipment with capacity of more than 3 tons to swab ditches, set culverts and perform various other public works street maintenance and construction by performing the following duties. Essential Functions: Regular and timely attendance at work. Drive and operate trucks and other motorized equipment such as dump trucks, front loader, backhoe, gradall, or excavator, and combination cleaner/vac truck. Work with crews to dig, hoist, and/or haul materials. Assist with various semi-skilled and unskilled duties such as loading and unloading materials. Inspect and service equipment daily by checking tires, lights, brakes, gas, water, oil, hydraulic coolant, fittings, diesel grease, and perform other minor repairs and maintenance as needed. Maintain telephone or radio contact with supervisor to receive instructions. Serves as "essential personnel" and is required to remain available for immediate call-in due to any natural or man-made disaster, or any other event the Public Works Director or City Manager deem necessary. Contribute to team effort by performing other related duties as assigned. Education, Experience, and Licenses: High school diploma or equivalent is required. A minimum of two (2) to five (5) years' experience in drainage system maintenance and construction including some operation of heavy equipment is preferred. Special Licenses and Certifications: A Valid Texas Driver's License CDL Class B with "N" Endorsement Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and outside weather conditions. The employee is frequently exposed to high, precarious places. The noise level in the work environment is usually loud. The employee in this position is required to remain available for immediate call-in due to any natural or man-made disaster, or any other event the Public Works Director or City Manager deem necessary. Job Posted by ApplicantPro

Job Description The Shipping Operator I prepares pipe for shipment and makes final repairs prior to shipment. Follows all safety policies and initiates safety improvements. Consults with team leader or shipping list to determine which pipe is required for shipping preparation. Reads, understands, and interprets specifications for pipe finishing and for bracing pipe in preparation for shipping. Operates industrial powered equipment to move material and pipe to required locations. Provides service to all areas associated with the movement of pipe and pipe related components. Moves support devices as needed in storage yard to safely support pipe at required location. Collects pipe from various work areas, delivers to storage location, or moves pipe from storage location to work area as required. Loads outgoing trucks and railcars and ensures load is properly secured to ride safely and without damage. Inventories materials in yard or other storage areas, and supplies shipping with materials as needed including cycle count and auditing. Lubricates truck, recharges batteries, fills fuel tank, or performs other light maintenance as required; contacts maintenance department or supervisor if other repairs or maintenance are needed. Performs pipe repairs according to procedure. Prepares bunks according to drawings. Mentors and trains lesser experienced equipment operators as directed by supervision. Maintains daily production log; submits log on daily basis. Assists drivers to position components/pipes properly. Completes daily inspections and submits. Measures wood pieces for stulling or bracing pipe; selects proper wood pieces, cuts and shapes as required for proper fit in pipe and install. Places bracings in completed pipe according to shipping specifications. Places end caps on pipe. Positions bunks on to trucks or rail cars. Bands individual pipes and pipe groupings to rail car. Performs other tasks as instructed by management. MINIMUM QUALIFICATIONS Must be physically able to perform the essential functions of the job, with or without reasonable accommodations. Must be able to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Must be able to read, write, and interpret simple documents and instructions, short correspondence, and memos. Must be able to effectively present information in one-on-one, small group situations to employees, and members of leadership. Must be able to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Must be able to compute ratio and percent and to interpret bar graphs. Must be able to read and interpret linear and circumference measurements using tape measures and calipers. Must be able to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Must be able to read, interpret, and carry out instructions furnished in written, oral, or diagram form. Must be able to deal with problems involving several concrete variables in standardized situations. Must be able to read, write and effectively communicate in English. Must have the willingness to rotate to different positions as requested by manager or team leader. PREFERRED QUALIFICATIONS Experience as forklift driver. ESSENTIAL PHYSICAL FUNCTIONS The employee is regularly required to stand, walk, use hands to finger, handle, or feel and talk or hear. The employee is occasionally required to sit. The employee is frequently required to stand; walk; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds, and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Central Office Support Additional Information: Show/Hide JOB TITLE: Print Operator STATUS: Non-Exempt TERMS: 240 Duty Days DEPARTMENT: Communications/Printing PAY GRADE: N06 Attachment(s): * Print Operator N06.pdf

Job DescriptionBenefits: Accident Insurance Hospital Indemnity Insurance Critical Illness Insurance Short Term Disability Insurance Long Term Disability Insurance Company Paid Life Insurance 401(k) 401(k) matching Dental insurance Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Heavy Equipment Operator Make an Impact at C&D Scrap Metal Ready to take the wheel in a fast-paced, hands-on role where your skills and grit truly matter? Join a crew that keeps Houstons metal moving and brings pride to the recycling industry. At C&D Scrap Metal, we dont just run machines we run a tight, high-performing operation that values expertise, safety, and professionalism. If you're the kind of operator who knows how to get things DONE, this is your next move. What Youll Do Be the driving force behind our daily yard operations: Own the yard flow under Supervisor direction youre the one who keeps things running on time and on target. Load and unload materials with precision and confidence using loaders, excavators, crane material handlers, and forklifts. Support the metal processing crew sort, prep, and help us move materials to the finish line. Put safety first inspect equipment, gear up with PPE, and report anything that looks off. Keep your machinery humming perform basic maintenance and alert us to any issues fast. Be a standout with customers make every drop-off feel smooth, welcoming, and professional. Keep it clean help us keep the yard organized, safe, and efficient. Schedule & Locations Full-time role Occasional travel to satellite locations for operational support Who Were Looking For Youre not just an equipment operator youre a problem-solver, team player, and safety champion. At least 2 years operating heavy equipment (loaders, excavators, crane material handlers) Minimum 1 year in industrial or scrap yard environments Strong stamina, hand-eye coordination, and attention to detail Able to thrive independently and work without being micromanaged Committed to doing the job safely, smartly, and professionally Willing to work outdoors, no matter the weather Open to learning new tech and tools we evolve and so should you Why Join Us C&D Scrap Metal is a growing force in Houstons industrial landscape. We promote from within, reward hard work, and operate like a well-oiled machine with respect, integrity, and teamwork at the core. Here, your skills wont just be used theyll be valued and built upon. Ready to move metal and move your career forward? Apply now and lets build something great together.

Job Description Now Hiring: Heavy Equipment Operator

Job Description Job Title: Heavy Equipment Operator Company: Texas Native Landscape Supply (an Austin Wood Recycling company) Employment Type: Full-time Reports To: Yard/Operations Leadership (as designated by client) Travel: None expected Compensation: $17-$21/hour Benefits: Comprehensive Medical/Dental/Vision; 401(k) (fully vested at year one; up to 4% company match for deferrals of 5%+); PTO; paid holidays; paid bereavement; educational assistance for industry-related certifications. Job Summary The Heavy Equipment Operator supports yard efficiency and safety by operating equipment to move, stage, and load materials, while maintaining situational awareness in an active yard environment. The role is critical to throughput, order accuracy, and safe traffic flow. Essential Duties and Responsibilities Operate heavy equipment (as assigned) to load/unload, move materials, and maintain yard flow. Conduct daily equipment inspections; report maintenance needs promptly. Coordinate with yard leads and CSRs to ensure correct product selection and loading accuracy. Maintain safe work zones and follow site traffic and safety protocols. Support yard housekeeping and material organization to improve safety and efficiency. Required Qualifications Prior experience operating heavy equipment in a yard/construction/materials environment (or strong demonstrated competency). Strong safety mindset and ability to follow yard protocols consistently. Reliable attendance and ability to work outdoors. Preferred Qualifications Equipment certifications; forklift certification. Experience in recycling/materials processing environments. Work Environment / Schedule Outdoor, active yard environment; schedule set by site operations. What Texas Native Landscape Supply (an Austin Wood Recycling company) Offer Medical, Dental, and Vision coverage. 401(k) fully vested at year one; up to 4% company match (for 5%+ deferrals). Generous PTO, paid holidays, and paid bereavement leave. Educational assistance for industry-related certifications. How to Apply Scroll down to “Apply to Job.” Under “Upload Resume *”, do one of the following: Drag and drop your resume into the upload box, or Click Upload and select your file Make sure your resume file is accepted: PDF/DOC/DOCX/TXT/RTF and under 10MB. Fill out the Personal Information section (typically Full Name, Email, Phone, and optionally LinkedIn). Complete any Additional Questions (often includes an SMS consent checkbox). Click the final Apply button to submit. EEO Statement Texas Native Landscape Supply (an Austin Wood Recycling company) is an Equal Opportunity Employer. We evaluate qualified candidates without regard to race, color, national origin, religion, gender, age, marital status, disability, veteran status, sexual orientation, gender identity, or any other characteristic protected by law.

The Robot Operator is responsible for setting up and operating robotic welding equipment according to established procedures. This role requires interpreting blueprints and drawings, adjusting robot settings to specifications, and ensuring accurate, quality production. Essential Responsibilities: Review work orders and shop drawings to confirm dimensions and material availability Set up workstations, fixtures, and robotic welding equipment Perform dry runs on initial pieces to verify accuracy Operate the robotic welding system to complete production jobs Inspect completed work and sign off on operations Requirements Knowledge, Skills & Abilities Ability to read and interpret shop drawings Basic math skills and experience using measuring tools Familiarity with robotic welding equipment Strong focus on quality and productivity Ability to organize, prioritize, and manage multiple tasks Effective verbal and written communication skills Ability to stand for extended periods Ability to lift, push, and pull up to 25lbs unassisted Work Environment Typical machine shop environment Willingness to work additional hours as needed Willingness to be cross trained on multiple machines Minimum Qualifications High school diploma or GED Experience in a shop environment with robotic and plasma cutting equipment Familiarity with robot control panels; forklift and overhead crane experience preferred -------------------------------------------------------------------------------------------------------------------------------------------------- At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job - you gain access to a range of benefits designed to promote your well-being, growth, and financial security. Health, dental and vision insurance 401K with company match Life Insurance Flexible Spending Accounts Generous annual time off policy 12 Company-Paid holidays A Solid Wellness Program to support your personal health goals Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company - APPLY TODAY! ------------------------------------------------------------------------------------------------------------------------------------------ We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Shift Days/Hours: 1st shift Monday - Friday 6:00 am - 2:30 pm. /OBJECTIVE: To Prep billets on a lathe for the CNC department. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the Essential functions. Set up a machine to Prep the billets on the face, and groove, turn down O.D and I.D. Control inventory. Inspect goods. Implement and practice Lean Manufacturing tools including 5S, to increase productivity, and eliminate waste. Assist in cross-training. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by the lead or supervisor. Other Requirements Must be able to learn basic computer skills. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to work in an environment with various temperatures. Required Education and Experience: High school diploma or equivalent. Must have 6 months to 1 year of work-related experience or be qualified by certification. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 50 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit, and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand.

The Shipping Operator I prepares pipe for shipment and makes final repairs prior to shipment. Follows all safety policies and initiates safety improvements. Consults with team leader or shipping list to determine which pipe is required for shipping preparation. Reads, understands, and interprets specifications for pipe finishing and for bracing pipe in preparation for shipping. Operates industrial powered equipment to move material and pipe to required locations. Provides service to all areas associated with the movement of pipe and pipe related components. Moves support devices as needed in storage yard to safely support pipe at required location. Collects pipe from various work areas, delivers to storage location, or moves pipe from storage location to work area as required. Loads outgoing trucks and railcars and ensures load is properly secured to ride safely and without damage. Inventories materials in yard or other storage areas, and supplies shipping with materials as needed including cycle count and auditing. Lubricates truck, recharges batteries, fills fuel tank, or performs other light maintenance as required; contacts maintenance department or supervisor if other repairs or maintenance are needed. Performs pipe repairs according to procedure. Prepares bunks according to drawings. Mentors and trains lesser experienced equipment operators as directed by supervision. Maintains daily production log; submits log on daily basis. Assists drivers to position components/pipes properly. Completes daily inspections and submits. Measures wood pieces for stulling or bracing pipe; selects proper wood pieces, cuts and shapes as required for proper fit in pipe and install. Places bracings in completed pipe according to shipping specifications. Places end caps on pipe. Positions bunks on to trucks or rail cars. Bands individual pipes and pipe groupings to rail car. Performs other tasks as instructed by management. MINIMUM QUALIFICATIONS Must be physically able to perform the essential functions of the job, with or without reasonable accommodations. Must be able to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Must be able to read, write, and interpret simple documents and instructions, short correspondence, and memos. Must be able to effectively present information in one-on-one, small group situations to employees, and members of leadership. Must be able to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Must be able to compute ratio and percent and to interpret bar graphs. Must be able to read and interpret linear and circumference measurements using tape measures and calipers. Must be able to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Must be able to read, interpret, and carry out instructions furnished in written, oral, or diagram form. Must be able to deal with problems involving several concrete variables in standardized situations. Must be able to read, write and effectively communicate in English. Must have the willingness to rotate to different positions as requested by manager or team leader. PREFERRED QUALIFICATIONS Experience as forklift driver. ESSENTIAL PHYSICAL FUNCTIONS The employee is regularly required to stand, walk, use hands to finger, handle, or feel and talk or hear. The employee is occasionally required to sit. The employee is frequently required to stand; walk; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds, and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.