Operator jobs in Meriden, CT

Equipment & Machine Operator Duration: Contract to hire! Pay Rate & Hours: 6:45 AM - 3:15 PM -Monday - Friday $22.00 10:45pm to 7:15am - Sunday to Thursday - $23.50/hr Qualifications: Sound judgment for use in machine troubleshooting and product disposition. Must be at least 18 years of age. High School Diploma, or GED with 1 to 3 years of manufacturing experience preferred; or Technical Certificate with associated relevant experience. Work Environment. Work involves use of manufacturing equipment or close proximity to equipment. May be exposed to biohazards and/or chemicals. Work environment can range from clean room and proper gowning requirements to a production area that is open, potentially noisy, and with moving equipment. Must be able to lift up to 35 lbs. and push/pull up to 80 lbs. Recurring physical demands include standing, walking, stooping, crouching, climbing, bilateral motion involving hands, wrists, and upper body. Concentrated visual attention to perform checks on products and components. Typically requires travel less than 5% of the time. Position Summary The Equipment Operator II is responsible for the safe and efficient operation of assigned equipment, ensuring continued operation through interpretation of and response to machine faults, and line clearance needs. Perform start-up operation from power off/cold state; complete equipment and product paperwork, such as traceability and start-up checklist. Conduct Level I required preventive maintenance tasks. Participate in changeovers to include line clearance, system transactions, and associated documentation. Perform work order set ups in electronic batch record, data acquisition and inventory management systems Pull test samples for Quality Control in process inspection, remove completed production from machine and place in finished goods totes. Fill component Hoppers/Bowls as required to maintain production. Perform minor troubleshooting to diagnose machine performance issues; escalate to assigned Technician when required to ensure resolution. Perform line clearance activities and return equipment to proper operation. Update hourly production boards with production and efficiency numbers; note issues that prevented goal attainment (downtime, waste, quality, etc.) Submit machine repair tags to identify issues requiring support services. Ensure that product not meeting quality specifications is processed under non-conformance procedures/requirements. Maintain 5S standards in assigned work areas. Model company values and support strategic initiatives. Perform other related duties as assigned or required. Benefits (employee contribution): Health insurance Health savings account Dental insurance Vision insurance Flexible spending accounts Life insurance Retirement plan All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Gateway Terminal is a leading terminal on the East Coast strategically located in the Port of New Haven, Connecticut, providing turnkey vertically integrated logistics services for dry bulk, liquid bulk, and breakbulk products. Gateway Job Descriptions 31 Waterfront Street New Haven, CT 06512 Job Summary: Operates a wide variety of heavy equipment, and vehicles that perform the spreading, and loading of onsite materials. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. Operates heavy equipment in compliance with the company operating safety policies and procedures. Front End Loader Excavator Bulldozer Forklift Conducts routine equipment inspections and preventative maintenance on equipment; maintains accurate records. Move, load, and position raw materials with the use of material-moving equipment. Performs other duties as assigned. Required Qualifications: Must be eligible to work in the United States without a Visa sponsorship Must be 18 years or older Ability to effectively operate independently with minimal supervision Willing to work a flexible schedule Ability to read, comprehend and carry out simple instructions from oral instructions or written correspondence Must be able to work in a cold/hot environment Detail oriented and accurate Preferred Qualifications: High school diploma or equivalent CDL, or comparable work experience Ability to communicate via 2-way radio Truck dispatch experience, better practices Understand, and speak Spanish PHYSICAL DEMANDS/WORK ENVIRONMENT: While performing the duties of this position, the employee is required to stand; walk; use hands, handle, or feel; and reach with hands and arms. The work environment involves hazards, risks, or discomforts typical of working around with or around machinery with exposed moving parts, arrant chemicals, heavy equipment, extreme heights, or abusive or hostile clientele and patients. Exposure to disagreeable weather conditions and extreme levels of temperature, ventilation, lighting, and sound is normal. The noise level in the work environment is usually moderate.

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Production OperatorThis position is responsible for daily operations of the production floor; ensuring the shift meets established safety, quality, and production goals in compliance with all applicable legal and food safety requirements. Essential Functions Responsible for daily activities of the production line(s), ensuring product adheres to Niagara's standard of safety, quality, and throughput. Accurately completes applicable quality and production reports hourly. Physical and visual inspection of product is required to prevent non-conforming goods. Correctly reports all quality defects to the appropriate team members and shift leadership. Adheres to the highest standards of company and plant safety programs, guidelines, rules, and regulations. Abides by Niagara's Good Manufacturing Practices (GMP) and Food Safety Standards at all times. Maintains general housekeeping in all areas of production and additional areas assigned by plant leadership. Maintains appropriate level of raw materials as required, to ensure production lines incur minimal downtime. Demonstrates the aptitude and skill to work in all assigned areas of production; troubleshoots minor production line issues and performs relief duties when required. Regular and predictable attendance is an essential function of the job. Ability to work 12 hour shifts, day or night, on a rotating 2-2-3 schedule or schedule as dictated by production demand. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 2 Years - Experience in Field or similar manufacturing environment 2 Years - Experience in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma or GED Preferred: Associate's Degree Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly$20.01 - $27.02 / Hourly Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Are you looking for a career in construction with opportunity for advancement? Richards Corporation is currently seeking highly motivated construction equipment operators. Operate heavy equipment such as excavator, loader, bulldozer, skid steer, etc Prepare construction sites for building, demolition, or excavation Dig holes and trenches Prepare building sites for parking lots, driveways, sidewalks, etc. Inspects and fuels equipment Requirements Reliable transportation. Pass a background check. Pass a pre-employment drug test. Be at least 18 years of age. Ability to do physical labor and other strenuous physical tasks. Ability to work in all weather. Be punctual and reliable. The ability to safely use hand and power tools. Benefits/Perks Career advancement in a growing field Job Security Earning Potential Insurance/401K PTO Compensation: $35.00 - $50.00 per hour If you're looking for a career that offers flexibility, job stability, strong compensation, and more, then you've come to the right place! The industry needs you! Associated Builders and Contractors of Connecticut (CT ABC) is a construction industry trade association representing Merit Shop contractors in Connecticut. As a Chapter of ABC National, our membership of over 200 members is afforded an effective voice in the political system at the local, state, and federal levels. Across the country, ABC represents more than 21,000 members in over 65 Chapters. Based on the merit shop philosophy, we help our members develop people, win work and deliver work safely, ethically and profitably for the betterment of the communities in which they work. Merit Shop is free enterprise - the belief that all construction contracts should be awarded to the lowest responsible, qualified bidder based on merit, regardless of the company's labor affiliation. We are a voluntary membership organization working to support and advance the entire construction industry. Our membership is diverse; ranging from some of the largest and most established firms in Connecticut to younger firms who have just entered the commercial and public construction market. Membership also consists of both Supplier and Associate members who work side by side with our contractors to move the industry forward. Is a career in the construction industry for you? Working with an Associated Builders and Contractors of Connecticut member firm is a great career choice! Plenty of excellent positions are out there, ready for motivated people like you to fill them. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Associated Builders and Contractors of Connecticut.

Job Description If you are looking for a new career where you can get coaching and training for a job that's in demand, we are looking for you! Apply today to join the team at Mr. Rooter Plumbing. We are looking for the best people to join our team. You may have never thought about plumbing as a career, but it's a job that pays extremely well! Plumbing is a very important service work that's always needed, even in times of economic uncertainty. As a Equipment Operator for an excavation team, you'll be doing something that matters! At Mr. Rooter Plumbing, you don't need prior experience or licenses to join our team. (But if you have some, that's a plus!) We'll teach you everything you need to know to get started in a career in this industry. Within as soon as 90 days, you will be a trained equipment operator in the plumbing industry. Plus, you'll be on a career path for more advanced skills and credentials that will give you future job security and an opportunity to grow your income. That's why this is the best equipment operator job on the planet! How to Know if You Are a Good Fit for this Service Professional Position This equipment operator job isn't for everyone. It can be hard work, long days, indoors and out, and you'll work in various conditions. If you like what you see below, keep reading: · You like interacting with people. You'll be an important component of our company serving homeowners and solving their troublesome problems and saving the day. Plus, you'll be part of the team here at Mr. Rooter Plumbing. · You like operating on a team. After your initial training, you'll be in operating company owned equipment. You'll make calls as part of a dig team, helping homeowners get back to a normal life with a fully functioning plumbing system. · You are patient and persistent. You like figuring things out and don't get frustrated easily. You're willing to take the time to explain things and help people and see something through. · You like working with tools and technology. You'll need to be comfortable using a variety of different tools and equipment. We'll teach you the best way to use every tool required to perform the work. · You aren't afraid to get dirty. You like working with your hands and complex equipment, and don't mind dealing with the job's more challenging and physical aspects. Occasionally, you'll be dealing with gross discoveries and bad smells, but you'll work to help homeowners restore safe and functional homes. · And afterward, you like to clean up. You take pride in your appearance and bring professionalism to your game. You'll wear the Mr. Rooter uniform, which identifies you to our customers as one of the best in the industry. You appreciate a great coach. At Mr. Rooter Plumbing, we give our employees the training and coaching they need every day. We'll show you multiple ways and different options for opportunities to grow your career in the plumbing industry. Here's What You'll Be Responsible For Initially, you'll team up with a more experienced equipment operator to train on the knowledge and skills you'll need to perform. Once you are up to speed, you'll be the face of the company and critical in providing an excellent experience for our customers. You'll provide crucial services for our customers' homes and families. Here are the things you'll be responsible for: · Providing Repair and Maintenance Services - You'll do things like towing equipment and excavating for drainage systems, and exposing broken sewer lines so our expert plumbers can repair and replace. · Following Our Mr. Rooter Plumbing Process - You'll follow our proven process, working with our drain cleaners and plumbers. How We Measure Success at Mr. Rooter Plumbing The team is collaborative and competitive here at Mr. Rooter Plumbing and we keep our eyes on the numbers to ensure everyone wins. There's even a physical scoreboard at the office so that we can celebrate the victories. Here are some of the things we measure: Offering and Delivering Solutions - We educate our customers thoroughly and give them the best options to solve their current issues, plus to prevent more problems in the future. Then, we follow through to take care of their plumbing needs. Quality Workmanship - We make sure we get it done right, the first time. Operating Efficiently - We stay productive with our time and carefully use materials to avoid waste. High Customer Satisfaction - We collect customer feedback through surveys and Google reviews that we tie back to each service call. We are proud to maintain high scores for our brand and our location. Job Requirements The following are the minimum requirements to be considered for this General Labor position: · Must be able to lift at least 35 lbs., bend, stoop, and crawl into confined spaces. · Must have a valid driver's license and be insurable - you'll be driving our company vehicle. How We Take Care of Our Team Members · Paid Training - We make sure that you have the knowledge and skills to grow in your career. · Branded Company-Provided Vehicle for Work -You'll be driving an assigned vehicle, plus operating other equipment. · Benefits The starting pay range for this position is $35.00 to $55.00 per hour, depending on your level of experience doing similar work. At Mr. Rooter Plumbing, we value helping our team members build long-lasting careers in the plumbing industry, starting from general labor positions all the way to team leaders or licensed plumbers. If you're ready to join our talented & enthusiastic team that shows up ready to crush goals, it is time to take the next step! APPLY TODAY

Carlisle Weatherproofing Technologies (CWT) is a leading supplier of building envelope solutions that effectively drive energy efficiency and sustainability in commercial and residential applications. We are looking for a Machine Operator to join our second shift EPS team in Prospect, CT. Shift: 6 pm-4:30 am Starting Pay: $23.81+$1.00 for shift differential Job Summary Operate machinery designed to perform a specific portion of the production process for Carlisle Companies Incorporated. Assist Operator II and Operator III on packing and end-of linework, and as needed. Overtime, no travel is required. Duties and Responsibilities: * Operates machinery of assigned department to complete assigned work order. * Receives and reviews work orders. * Communicates the required amount of material needed to perform tasks to other departments. * Continuous observation of machine operation to ensure optimal performance of standard work within the assigned department. * Performs hazard-based functions on machinery, including lock out/tag out and daily equipment inspection. * Stacks, sorts, and bundles material according to assigned department's standard work. * Occasional housekeeping tasks, 5S, and SQDC involvement. * Records data of manufactured material for quality control and improvement functions. * Achieves production goals while complying with all safety requirements. * Assists with quality checks to verify proper parameters are adhered to. * Assists Operators II & III in packaging and end-of-line work, and as needed. * Other duties as assigned. Required Knowledge/Skills/Abilities: * Highly motivated with a good, sound work ethic. * Must demonstrate safe working practices and possess great attention to detail. * Ability to follow Carlisle Companies Incorporated policies, procedures, and processes. * Good communication, organization, and time management skills. * Basic computer, mathematics, and problem-solving skills; ability to use a calculator. * Ability to use measuring devices (gauges, tapes, rulers). * Team player able to follow instructions from both management and peers. * Ability to learn and operate new equipment. * Expectation to understand, participate in, and support company COS initiatives, with focus on developing a lean mindset Education and Experience: * Required: * High School Diploma or GED is Preferred * Must be at least 18 years of age or older. * Prior experience in a manufacturing setting preferred. Working Conditions: * Fast paced manufacturing environment where workers are exposed to both ambient/outside temperatures and dust; working with mechanical parts and pinch points; exposure to increased noise levels. * Hours worked vary based on shift schedule and business volume. * Flexible to the possibility of overtime and weekend hours when required. * Heavy, stationary machinery on the manufacturing floor. * Radio, Calculator, Measuring Devices * Hand tools * Computer (Shop Floor and ERP) Personal Protective Equipment (PPE) Used: * Eye, head, and hearing protection is required at all times on the production floor. * Safety toe shoes (steel/composite) * Hi-Vis Vests * Other PPE as defined by management within the assigned department. BENEFITS AND PERKS Our employees' well-being is crucial to Carlisle's success. Despite the nationwide increase in healthcare costs, Carlisle has maintained the same employee premiums for four consecutive years by absorbing the rising medical insurance expenses. Furthermore, you have the flexibility to tailor a benefits program that perfectly suits your needs. Benefits offered: * Medical, Dental, and Vision insurance- DAY 1 * Life and Accidental Death & Dismemberment Insurance * Leave & Disability Income Protection (FMLA, LOA, PPL, STD, LTD) * Employee Assistance Program (EAP) * Health Advocate - health care concierge service * PTO - sick days, 11 holidays, vacation * 401K Retirement Savings Plan with company match * Employee Stock Purchase Plan * Flexible Spending accounts (commuter benefits, flexible spending accounts, health savings account) * College Scholarships for Dependents * Tuition Reimbursement

Challenge Yourself and Impact the Future! MacDermid Alpha Electronic Solutions, a business of Element Solutions Inc (NYSE: ESI), is renowned worldwide for it's commitment to revolutionizing the electronics industry. With a legacy spanning over a centrury, we have continually set new benchmarks for excellence, reliability and sustainability in electronic materials. Our Expertise: Wafer Level Solutions - Revolutionizing wafer fabrication processes for enhanced efficiency and performance Semiconductor Assembly Solutions - Driving innovation in semiconductor assembly processes for unparalelled reliability Circuitry Solutions - Tailored solutions to meet the dynamic demands of modern circuitry Circuit Board Assembly Solutions - Elevating circuit board assembly processes for optimal performance Film & Smart Surface Solutions - Transforming electronics with cutting-edge materials and technologies for enhanced functionality and reliability Across diverse sectors including automotive, consumer electronics, mobile devices, telecom, data storage, and infrastructure, MacDermid Alpha Electronic Solutions has earned the trust of manufacturers worldwide. Our comprehensive rance of high quality solutions and technical services covers the entire electronics supply chain, empowering businesses to thrive in today's competitive landscape. We strive to embody the five 'Elements of our Culture'- our '5C's'; Challenge, Commit, Collaborate, Choose, and Care. These core values are the foundation of our organization which our employees embrace in their interactions with customers, colleagues and other stakeholders, to drive financial performance and create a rewarding work environment. Who are we looking for? A person in this position is responsible for operating production equipment to manufacture chemical batches in compliance with company standard operating procedures (SOPs) and all local state and federal regulations regarding safety, health, and the environment. What will you be doing? * Work from written procedures to process, purify, and chemically fabricate products and their compounds through a sequence of batch operations. * Operate equipment, including reactors, tanks, pumps, mixers, pH meters, level meters, flow meters, valves, and hoses used in the manufacture of said products. * Handle liquid and solid chemicals using pumps, scales and flow meters. * Weigh, measure and check raw materials and finished product to ensure that batches manufactured contain proper ingredients and quantities and that accurate inventory is maintained. * Perform product weighing, packaging, labeling, and boxing operations in accordance with SOP's. * Locate materials in the warehouse and transport to manufacturing areas using a forklift as needed * Collect process samples and interface with laboratory personnel for analysis. * Maintain required log sheets including but not limited to batch tickets, packaging sheets, scrubber operation log, pH meter calibration, and equipment inspections. * Attend required HSE training including Hazardous Waste Management, emergency response, and Hazard Communication, and demonstrate an acceptable level of understanding of topics. * Package, mark, and label Hazardous Waste containers. * Operate equipment and follow procedures in accordance with ISO 9001 and ISO 14001, OHSA'S 18001 standards. * Communicate with shift leader regarding safety, production, quality, or any other operational issues. Actively participate in shift meetings to assist in work planning and continuous improvement. * Adheres to all corporate, plant, and safety policies/procedures. * Wears personal protective equipment as applicable. * Completes all assigned training including corporate, HSE and Quality specific requirements * Train other chemical operators in operations, processes, and procedures as needed to ensure efficiencies, safety, and compliance. * Other duties as assigned. Who are You? * High School Diploma or GED equivalent * 3+ years of applicable experience making batchs, working and blending chemicals. Chemical manufacturing is highly preferred. * Experience with sulfide or cyanide gold reaction processes or other precious metals products. * Experience working in a clean-room environment * Forklift certification and Hazardous Waste Operations certification preferable * Strong verbal and written communication skills; convey technical information effectively and concisely to engineering, sales, technicians, etc. We understand that not all candidates may meet the requirements listed above. If you believe you have the knowledge and experience necessary to excel in this role, we encourage you to apply. We are Offering... Challenge Yourself and Impact the Future - You will be part of a highly collaborative culture that promotes continuous improvement through cross-functional partnerships to achieve our mission. We do this through a strong and unified culture and transparent management which has empowered us to create high performing global teams that achieve superior solutions for our customers. As part of the MAES Team, you will have ... Opportunities for career growth, competitive compensation (competitive base salary and performance related bonus plan) and benefits packages (health, dental, and vision insurance, Wellness Program, PTO/Holidays, as well as a 401(k)-retirement plan with a company match). Innovated work environment where you will be a part of a dynamic and collaborative team. Perks and Incentives such as paid parental leave, tuition reimbursement, and opportunities for professional development. The typical base salary range for this position is between $20.83 and $31.25 Equal Opportunity Employer All qualified applications will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category applicable under federal, state and local laws. Nearest Major Market: New Haven Nearest Secondary Market: Hartford

Load and unload racks and baskets for plating and stripping line. Visual inspection of plating and stripping lines Prepare parts for elastomeric molding, including grit blast, cleaning, adhesive application, milling of rubber. Molding of elastomeric bearings, including cutting shot size, deflashing, and visual inspection. Operation of dry film and aluminum pigment coating equipment, including masking, cleaning, grit blast, spray coating, and cure. Maintain production lot information to assure all parts and lots are traceable. Maintain a safe working environment. Maintain cleanliness in the work area. Other duties as assigned by the supervisor. Attendance at work is an essential function of the job. SKILLS / CERTIFICATIONS: High School Degree, equivalent or the combination of work experience to the satisfactory of management. Mechanical Aptitude. Blueprint Reading. Ability to use various equipment including gauging/measuring devices, ovens, sandblaster, etc. AAP/EOE

Chemical Operator BestLogic Staffing is recruiting for a Chemical Operator. Shift Hours:11 pm - 7 am The Chemical Operator is responsible for the safe operation of equipment in a manufacturing facility, material handling, quality control, accurate recordkeeping, and maintaining housekeeping standards while following company policies and safety procedures. Essential Functions Operate and monitor plant systems (feeds, temperatures, pressures) Follow procedures and instructions from Leads and Managers. Sample, test, and record process streams per quality requirements. Accurately weigh and add raw materials; monitor inventory. Load finished products into bulk tankers, totes, and drums. Assist with maintenance preparations. Maintain housekeeping and Good Manufacturing Practices. Support compliance with OSHA, EPA, PSM, and safety policies. Input data into ERP system and complete logs/forms. Provide improvement suggestions to management. Participate in EHS and training programs. Must be willing to work overtime, nights, and weekends. Other duties as assigned. Skills & Qualifications High school diploma required; community college certificate preferred. 0-5 years of chemical or manufacturing experience (certificate in Chemical Plant Technician training may substitute). Basic Microsoft Office 365 skills. Knowledge of hazardous materials handling, OSHA/EPA compliance, and emergency response training. Strong mechanical aptitude and troubleshooting skills. Ability to work effectively in teams and interact with all plant levels. Full professional English proficiency (written & verbal). Flexible schedule availability. BestLogic Staffing is a Top Staffing Firm that is partnered with some of the largest names in various industries. Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore! Learn about our Process or to speak to a Recruiting Professional directly, call 1-866-585-8055. BestLogic Staffing is an equal opportunity employer.

Job Description PRINCIPAL ACCOUNTABILITIES (DOOR OPERATOR, INTERNAL MOVER, LINE OPERATOR, MULTI-PACK TRUCKING, HARD ROLL WRAPPING & LOADING, CONSOLIDATE & OFFLINE WORK STATION) Work and communicate with team members when performing any assigned work task. Maintain both productivity and quality performance standards while performing all work tasks. Perform work safely and support activities to ensure continued safety improvements, take responsibility to keep coworkers safe. Maintain both accuracy and completeness on all required paperwork. Follow all WMS/ procedures for the recording and tracking of product to insure inventory accuracy. Maintain housekeeping standards for both work area and department. Maintain safe operating procedures for all equipment required to perform work tasks. Follow all proper lifting procedures. JOB TASK EXPECTATIONS: Training: Needs to successfully complete checker training and perform the job during certification with productivity and quality (error rate) results that at least meet department expectations. This includes all types of loading methods. Loading and unloading finished product. Follows Sharp Guidelines. Loads and unloads product with productivity and quality that meets department standards. Stores product safely, without damage, and according to established department practices. Consistently completes all required loading and unloading paperwork correctly and in a timely manner. Understands and follows special circumstance expectations, e.g. lot control unloads, wet damage claims, returns. Follows all WMS procedures (loading/unloading/damage etc.) Operate workstations (OLWS) - Produce palletized products. Operates equipment safely and with a full knowledge of quality expectations. Any potentially serious operational issues (e.g. safety, equipment, quality, etc.) are communicated to Leadership. Asks questions when unsure of expectations, e.g. quality specs. Produces product at standard rates of operation. Does not allow work to expand to fill time allotted; asks for more direction. Exhibits flexibility and thoroughness in ability to work on different machines with multiple product specs. Follows all housekeeping procedures. Consolidate bays, forward stage product, and perform other warehouse support functions. Ability to accomplish warehouse support functions with one-time work direction and little, or no, supervision. Follows all WMS procedures. Follows storage practices that meet department standards. Does not allow work to expand to fill time allotted. Asks for more direction when necessary. Follows all housekeeping procedures. Remove and Store Product from Output Lines Stores product at standard rates of operation. Asks questions when unsure of expectations, e.g. quality specs. Exhibits flexibility and thoroughness in ability to work on different output locations. Alerts team leadership to any potentially serious operational issues (e.g. quality, equipment, safety, etc.) Follows all housekeeping procedures. Work safely; identify and resolve safety issues. Always follows safety procedures. Exhibits safe behaviors in all aspects of his/her job, i.e. thinks before he/she acts, uses PPE, locks equipment out, watches out for co-workers, take two, cut no corners, get help when needed. Use EtQ for Hazard ID/Awareness and Mi CASA Task Observations Demonstrate a consistent ability to get to work on time and with minimal call-ins Less than 4 occurrences in any 12-month period as defined by department guidelines. Calls in prior to beginning of shift if late or absent. Physical Factors: infrequently - (less 1/3 work day) occasionally - (1/3 - 2/3 work day) frequently - (over 2/3 work day) Standing - infrequently Sitting - frequently Walking - infrequently Climbing - occasionally Squatting - occasionally Pushing/Pulling - occasionally Leaning/Reaching - frequently Lifting/Carrying - occasionally Driving - frequently Lift 26 to 50 pounds - occasionally Essential Physical Demands of a Paddle Tractor Operator: Climb/dismount tractor cab - height of 48 - 52 by stepping onto an 18-inch step. Hand supports available for balancing and assistance - 3 to 10 times per hour for a 12-hour shift. Ability to shift in tractor cab seat from forward position to right or left trunk position. Driving 50% forward position, 50% backward position. Ability to turn to view objects directly behind tractor cab. Ability to turn steering wheel one full revolution to the right and left without restriction. Ability to reach and actuate foot pedal continuously. (both feet) Ability to reach and actuate hand controls continuously. (right hand) Ability to reach and activate hand scanner continuously. (right hand) Essential Psychological, Situational or Functional Factors: Speed, consistency and accuracy in tasks, meeting precise tolerances and standards. Interpersonal skills sufficient to work closely with others on a team. Ability to demonstrate flexibility in work environment, performing a variety of frequently changing tasks. Sustained concentration and prolonged commitment to job tasks. High level cognitive, interpretive or judgment skills. Ability to influence others. Ability to read and comprehend all types of paperwork, instructions, product codes and RFT screens. Ability to perform basic math computations to verify grab counts when picking, assembling, loading, unloading, replenishing and consolidating product. Ability to plan and organize work task process in order to perform within department standards. Ability to demonstrate initiative by being a self-starter and maintaining this discipline throughout the entire work process. Work Environment: Working inside warehouse / comfortable working temperatures winter / summer Can drive tractor forward if vision not obscured / required to drive backwards when vision is obscured Hours are: 7am-3pm, Monday- Friday Must be comfortable driving a forklift and performing shrink wrapping duties. Steel toed shoes required. Teams interview or on-site interview required.

Position Type: Full time, 40h/week. OT as business needs dictate FLSA Classification : Non- exempt (hourly) Salary Range: $24.00-27.00/ hour paid weekly . The actual pay range will depend on varying circumstances and individualized factors, such as job-related knowledge, skills, experience, and other objective business considerations. Reports to : Production Manager Company description: Roto North America is a subsidiary of Roto Window and Door Technology, a global leader in window and door hardware, with 15 production plants and more than 30 subsidiaries worldwide. Through its 2 companies, Roto Frank of America, Inc. and Roto Fasco Canada, Inc., Roto North America has been manufacturing and offering a variety of leading North American and European window and door hardware products in the USA and Canada. To learn more about Roto Frank of America please visit us at: Welcome - Roto North America Summary: The Machine Operator will be responsible for the advanced tasks of a Machine Operator, to include daily production and quality control of parts manufactured on the laser, injection moulding, machine programming, and operation of a component stamping press. Essential Functions: Accountable for production with machine operation and programming, to include injection moulding, laser, and component stamping press. Tasks: Able to set up and program injection molding machines. This includes insertion of molds and programming in all run criteria and adjusting as needed. Accountable for running daily production and performing hourly quality checks to ensure compliance with function, quality, and cosmetic specifications. Capable of using basic measuring equipment such as calipers, Ensure compliance. Observe all safety requirements. Creating nonconforming reports for out of specification product. Posting production orders in SAP. Inspects equipment prior to use to ensure proper setup and alignment; performs basic and routine adjustments. Able to maintain required efficiency rates. Conduct preventative maintenance on injection molding machines, dryers, and chillers. Able to train Machine Operator II employees on running equipment. Able to drive a forklift. Excellent organizational skills. General housekeeping of work area. Able to set up component stamping/laser/injection moulding machines. Employee must show up to work on time and be able to work overtime as needed. Performs other related duties as assigned. Minimum Required Education: High school diploma or equivalent required. Required Work Experience: 2 Years of related Manufacturing experience Work environment and Physical Requirements: Working conditions are based in a manufacturing setting. To perform this job successfully the individual must be able to stand and/or sit for prolonged periods of time. Must be able to traverse production facility and climb ladders. Must be able to lift and or move up to 45 pounds at a time. Must have manual dexterity in order to use tools or setup machines as directed. Perform repetitive tasks that entail frequent bending and stooping. Visual acuity to read instructions, operate machines, and inspect parts produced. Must wear personal safety equipment, as required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Benefits: Roto offers an attractive salary and benefits package: 401(k) 401(k) matching Employee assistance program Employee discount program Medical insurance Dental insurance Vision insurance Flexible spending account Health savings account Life insurance Short Term Disability insurance Voluntary Long Term Disability insurance Paid time off Paid Holidays

Job DescriptionBenefits: 401(k) 401(k) matching Competitive salary Dental insurance Employee discounts Health insurance Opportunity for advancement Paid time off Vision insurance Eastern Environmental Solutions, Inc. is seeking a skilled and reliable Excavator / Heavy Equipment Operator to join our team. We specialize in environmental remediation, tank removal, site work, drainage, septic systems, and general excavation. We are looking for a dependable operator with strong safety awareness and experience working on a variety of excavation projects. A CDL A License is required. For Compliance purposes for NYS transparency, the expected salary range is $38.00 - $44.00 per hour. Compensation will be based on experience, certifications, and other factors permitted by law. Responsibilities: Operate excavators safely and efficiently on environmental and construction job sites Perform excavation and other heavy equipment tasks for tank removal, remediation projects, drainage systems, septic installations, and general site work Follow site plans and directions from project supervisors Complete daily equipment inspections and basic maintenance Maintain adherence to all safety procedures and company standards Requirements: Proven experience operating excavators and heavy equipment in construction or environmental work OSHA 30 certification is required Must have a CDL A Strong understanding of job site safety Ability to work outdoors in all weather conditions Reliable transportation and strong work ethic Eastern Environmental Solutions offers a comprehensive benefits package which includes health, dental, and supplemental insurance, 401K with company match and paid holiday, sick and vacation days, profit sharing and other perks available. We are an EOE M/F/V/D. Serious dedicated and experienced inquiries only, please. Please submit your resume with salary requirements.

EDM Machine Operator needed in Meriden, CT for Tool & Die Manufacturer Pay: based on experience Hours: 7am-3:30 Monday- Friday EDM Machine Operator Responsibilities: Programming: Entering programs into the machine, often using G-code, and utilizing CAD/CAM software. Setup: Preparing the machine and workpieces by setting up the correct parameters and fixtures. Operation: Monitoring the machining process and making adjustments as needed to maintain quality and efficiency. Inspection: Measuring and inspecting finished parts to ensure they meet all specified dimensions and quality standards. Maintenance: Performing routine maintenance and troubleshooting issues to keep the machinery in good working order. EDM Machine Operator Requirements: Mechanical aptitude: A strong understanding of how machines work. Precision measurement: Proficiency with precision measuring tools and the ability to read technical drawings. Technical knowledge: Familiarity with EDM machines (such as wire and sinker types), CNC programming (like G-code), and CAD/CAM software. Soft skills: High attention to detail, problem-solving skills, and good communication are crucial. Education: a certificate or degree in a machine trade from a technical school or equivalent APPLY TODAY! for immediate consideration to our EDM Machine Operator positions!

We are currently seeking a reliable and safety-conscious Loader to join our team. The Loader will be responsible for efficiently loading and unloading materials, always ensuring adherence to safety protocols and procedures. The ideal candidate will demonstrate physical strength, attention to detail, and effective communication skills. Key Responsibilities: Wear personal protective equipment (PPE) and utilize proper tools as required for the safe completion of tasks. Safely climb up and down railcars, trailers, or other elevated platforms using the three-point contact technique. Lift, care, push, or pull items weighing up to 80 pounds, adhering to proper lifting techniques to prevent injury. Perform tasks that require stooping, bending, squatting, and standing for extended periods of time. Work outdoors in various weather conditions, adapting to environmental factors as necessary to ensure productivity and safety. Maintain written documentation as necessary, including completing checklists, arrivals and departures, and documenting incidents or safety concerns. Communicate verbally with the team members about the verification process, address any safety concerns, and report incidents in a timely manner. Collaborate with management to ensure efficient workplace and adherence to schedules. Follow established procedures and protocols for the safe handling and storage of materials, including hazardous substances when applicable. Participate in regular safety training sessions and adhere to company policies and procedures to maintain a safe work environment. Perform maintenance on equipment as needed. Requirements Qualifications: High school diploma or equivalent. Previous experience in a similar role is preferred but not required. Ability to effectively communicate verbally and in writing in English, including documentation and incident reporting. Physical strength and stamina to perform manual labor tasks, including lifting and carrying heavy objects. A willingness to work outdoors in all weather conditions and adapt to changing environmental factors. Strong Attention to detail and commitment to follow safety protocols and procedures. Ability to work independently and as part of a team, demonstrating reliability and dependability in completing assigned tasks. Additional Requirements: Willingness to undergo hands on supervised training. Ability to pass pre-employment background screening and drug testing. Flexibility to work varying shifts, including overtime, weekends and holidays as needed. Perform housekeeping duties including bathrooms, breakrooms, trash, weed control, washing equipment, shoveling, shop areas, painting, etc. when required. Participation in daily safety meetings. Benefits and Incentives: Health insurance, vision insurance, dental insurance, voluntary life insurance, 401K, paid time off, company provided short-term and long-term disability, company provided basic life insurance, referral bonus program, quarterly performance bonus. Equal Opportunity Employer: Precision Terminal Logistics is an equal opportunity employer and does not discriminate based onrace, color, religion, sex, national origin, age, disability, or any other characteristic protected by applicable laws.

Amaxx, Inc. in Pawling, NY is looking to hire a full-time Heavy Equipment Operator to prep sites by operating bulldozers, backhoes, and other machinery. Do you have a strong mechanical aptitude? Would you like to work for an established excavating business that has a family-like atmosphere? Do you want to join a company that values you and rewards your efforts? If so, please read on! This excavating and construction position earns a competitive wage of $24.00-$28.00 per hour, depending on experience. We provide solid benefits, including health benefits, paid time off (PTO), paid holidays, a 401(k) plan, and a 529 education savings plan. Additionally, we offer our Heavy Equipment Operators a monthly cell-phone stipend, uniforms and on-the-job training. If you're interested in operating graders, backhoes, and bulldozers, apply today! ABOUT AMAXX, INC. Amaxx, Inc. is a family-owned, multifaceted company offering excavation, trucking, and site development services. We have decades of experience in drainage systems, dredging ponds, installing retaining walls, and many other services to meet the site development needs of our operating area. Our shop also sells supplies for masonry, snow removal, and landscaping projects. We have tri-axle and 6-wheeler trucks standing by to deliver topsoil, gravel, and sand to our residential and commercial clients. We're proud to be well known for our outstanding customer service and quality workmanship. We live up to our motto: "When you work with Amaxx, you work with the best!" We truly feel that we work with the best team of employees in the industry. Our staff demonstrates a strong commitment to quality, which has a direct impact on the success of our company. To show our appreciation, we offer our team members a supportive company culture and amazing benefits. Come see what makes Amaxx different. Come work with the best! A DAY IN THE LIFE OF A HEAVY EQUIPMENT OPERATOR As a Heavy Equipment Operator, you have the important job of preparing sites for demolition, excavating, and construction. You start each shift by fueling and inspecting vehicles, checking to make sure they're in good condition. Then you load up the necessary tools and equipment and haul them to the job site. Using heavy machinery such as backhoes and excavators, you dig holes and trenches required for structural concrete. You enjoy the variety of projects each day brings, and you carefully follow directions as you prep areas that will become parking lots, sidewalks, loading docks, and driveways. Some days, you work on prepping sites for roads, bridges, and railroads. You work well as part of a team, and you remain alert to ensure the safety of your crew as you operate bulldozers, front-end loaders, and grade tractors. Your mechanical skills come in handy when performing routine maintenance and minor repairs. You get a thrill out of operating powerful machinery, and you take pride in safely and skillfully completing each job! QUALIFICATIONS Extensive knowledge of heavy machinery operation Ability to read building plans related to structural concrete and land grades Excellent mechanical skills Willingness to work some evenings and weekends Ability to lift 25 pounds Vocational school training or a completed apprenticeship is preferred but not required. Are you reliable with a great work ethic? Can you skillfully operate construction equipment in all terrains and weather conditions? Are you a team player who works well with others? Can you stay focused and safety-oriented during long periods of operating front-loaders, bulldozers, and backhoes? If yes, you might just be perfect for this position with our excavating business! ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this job in the field of construction, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Location: 12564

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. This is a full time position with opportunities for overtime, $100-$250 weekly bonus, and $45/day per diem while traveling and assisting Copart facilities nationally with business support and catastrophe response. Do you enjoy traveling? Are you able to travel for extended periods of time? Do you enjoy working around vehicles? Do you enjoy working with the latest technology? Must be willing to travel nationally on short notice. All travel expenses covered by Copart. The Loader Operator will be responsible for moving and loading vehicles with a company provided front end loader or forklift. In addition, the Loader Operator will be required to maintain documentation of vehicle movement around the facility. What do we want you to bring to the table? We are looking for hardworking, focused, team players that are willing to bring their best. What we will bring to the table? Training and advancement opportunities, health insurance (vision, dental available), 401k match, employee assistance program, flexible spending account, paid time off, and our employee stock purchase program! We love to promote from within, ask about our Believe and Achieve Program. Copart is committed to a diverse and inclusive workplace. · Open to applicants 18+ years old · Military applicants are encouraged to apply · A good job for someone just entering the workforce or returning to the workforce · Overtime time paid · $100-$250 Weekly Bonus while traveling · $45 Daily Per Diem paid while traveling · Must be able to work long hours 12-14 hours per day. · Must have valid driver's license and ability to travel by plane. · Be able to travel with 24 hours or less notice. Ability to work in extreme conditions weather and terrain. Required Skills and Experience · HS diploma or GED preferred. · At least two years of work experience, preferably in an outdoor environment. · One year of loader or forklift experience, certification preferred. · Excellent customer service attitude and skills. · Excellent communication skills written and verbal. · Positive attitude/High Integrity. · Ability to operate heavy equipment. · Must be able to multi-task in a fast-paced environment. · Strong attention to detail. · Occasional O.T. as needed. · Bilingual skills a plus. Pay $23.40 Per hour Medical, Dental, & Vision 401 (K) Employee Stock Purchase Plan Flexible Spending Accounts and Health Savings Account Life & AD&D At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: E-verify Participation Right to Work

Job Description Heavy Equipment Operator F&G Recycling USA Waste and Recycling, Inc F & G Recycling is dedicated to staying at the forefront of recycling and waste solutions. We are innovating every step of the way. From building the largest state-of-the-art recycling facility in the country and powering our buildings with solar energy, we are committed to you, our communities, and the planet. Our story started with a single truck. In 1974, founders Guy "Sonny" Antonacci and his wife Mary-Ann started Somers Sanitation - named after our hometown of Somers, Connecticut. Today, three generations of family and a dedicated team of professionals are leading our company into the future. While our fleet, facilities, services, and family have all grown, we take pride in continuing to operate our businesses based on the fundamental principle that has guided us since the beginning - to provide exceptional service and innovation to the communities and people we serve. Join a team committed to taking big leaps forward to remain at the forefront of sustainability. Some see waste. We see possibilities. Position Summary: The equipment operator performs duties relevant to safely and effectively operating heavy equipment in the course of daily operations. Ensure the operations floor is clear of obstacles and that traffic flows smoothly, efficiently, and safely to maintain production. Your Role: Safely and effectively operate heavy equipment to maintain productivity in the effective operation of the transfer starting or material recovery facility during daily operations. Ensures that the operational area is consistently clear of obstacles and that traffic is flowing smoothly. Performs general house duties in the assigned area to ensure safe, clean, and efficient operation of the facility. Keeps entire floor clean and dust level low by use of water truck and Bobcat front-end loaders, excavators, or similar equipment. Loads and monitors transfer trucks, van trailers, and rail cars based on the facility. Operates other equipment, including, but not limited to, industrial forklifts, manlifts, skid steer type loaders, and other mobile equipment. Perform routine maintenance checks on mobile equipment and facility equipment, and report malfunctions to the Supervisor. Work all assigned shifts from the schedule's start to the scheduled end time. Take an active role in the improvement of safety and health in the workplace. Read, understood, and applied information such as lockout/tagout procedures, safety rules, job hazard analyses, operation and maintenance instructions, and procedural manuals. Participate in all required Company meetings, including weekly safety meetings. Maintains reasonable, regular, and punctual attendance consistent with Company policies, the Americans with Disabilities Act (ADA), Family Medical Leave Act (FMLA), and other federal, state, and local standards. Adapts to changing duties, as required, based on business needs. Your Skills: Ability to complete safety, operational, and other required training within a scheduled period. Communication skills sufficient to complete required job functions. Demonstrated mechanical ability sufficient to complete routine tasks. Demonstrated success in the use of required safety equipment. Gritty, outgoing, and eager to learn. Strong communication (verbal and written) Strong interpersonal skills The environment is fast-paced, and the person in this role must be proactive, hardworking, highly organized, and an independent critical thinker. Desirable, although not essential, requirements: High school diploma or GED, or equivalent 2 years' experience as an equipment operator in a plant environment; or 5 years related experience, which includes training in a plant environment. This Position Features: Family-Oriented d Environment Excellent Benefits and Bonus Potential Physical Demands: Listed below are key points regarding the job's environmental demands and work environment. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of the job. Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc.), most of the workday. Required to exert physical effort in handling objects more or less than 30 pounds. Required to be exposed to physical and occupational risks (such as cuts, burns, exposure to toxic chemicals, etc.) rarely. Required to be exposed to a physical environment that involves dirt, odors, noise, weather extremes, or similar elements rarely. Clarity of vision. Local travel FG1 F & G Recycling, LLC EEO Statement: The Company is committed to and supports equal employment opportunity and affirmative action to all employees and applicants. Equal employment opportunity means equal treatment of employees and applicants without regard to the following legally-protected characteristics: race, color, religion, creed, sex (gender identity), pregnancy (including childbirth and related medical conditions), sexual orientation, marital status, national origin, ancestry, age, medical condition, genetic information (including characteristics and testing), veteran status, physical or mental disability status or any other legally-protected status.

A manufacturing company in Norwalk, CT is looking for a Quality Control Operator. The ideal candidate will have a keen eye for detail, strong analytical skills, and a commitment to continuous improvement. Primary responsibilities will involve monitoring the production process, conducting routine inspections, and performing tests on materials and finished products. You will work closely with production teams to identify and rectify any quality issues, ensuring compliance with industry regulations and internal standards. The Quality Control Operator will also be responsible for maintaining accurate records of inspections and tests, providing feedback to team members, and assisting in the development of quality control procedures. Responsibilities Conduct routine inspections of products during various manufacturing stages. Perform tests on raw materials and finished products to ensure compliance with quality standards. Document inspection results and communicate findings to relevant team members. Identify and report any quality issues or deviations from established standards. Collaborate with production teams to implement corrective actions and improve processes. Assist in the development and maintenance of quality control procedures and protocols. Participate in internal audits and assist with external audits as needed. Requirements High school diploma or equivalent; additional certifications in quality control preferred. Proven experience in a quality control role, preferably in a manufacturing environment. Strong attention to detail and excellent analytical skills. Ability to interpret technical documents, blueprints, and quality standards. Strong communication skills, both written and verbal, with the ability to work effectively in a team. Pay is $22/hr Hours are Monday - Friday 7:50am - 4:20pm. Must be able to pass background check.

Play a key role in delivering high-quality medications and supplements to consumers worldwide. We're seeking a machine operator who thrives in a clean, regulated manufacturing environment. Help shape the future of wellness and apply today! Tower Laboratories is a leading effervescent product manufacturer in the U.S. We develop and manufacture over-the-counter medications, prescription pharmaceuticals, nutritional supplements, soft drink tablets and other consumer products on a contract basis. We are continually expanding our effervescent product base and currently have several new and interesting products in the research and development phase right now. We are a family owned company and have been in business for over 40 years. ****************** We have positions open at our CENTERBROOK location! $17.00-$18 to start for 1st shift Plus, regular pay increases as training progresses. POSITION SUMMARY: We are willing to train the right, motivated individual to learn our tableting and packaging process. Operate and set up a wide range of manufacturing equipment which includes high-speed automated tablet presses and packager production line. Perform in-process testing and complete the necessary paperwork. Responsible for the efficient production of a high quality product. Perform all work in adherence to safety precautions, regulations and Good Manufacturing practices (cGMP) as required by the FDA. Tower Labs' production environment is clean and temperature and humidity controlled. Uniforms provided free of charge. POSITION QUALIFICATIONS: Dependability a must; we will be investing in you with training Mechanical aptitude with ability to troubleshoot and problem solve Basic math skills Ability to read and follow directions, complete paperwork and communicate effectively in English Ability to concentrate and focus on task under stressful and/or distracting conditions Ability to be a team player; good interpersonal skills Self starter with high level of motivation Ability to stand for entire shift, walk, bend, reach, climb ladder Ability to lift up to 40lbs on an occasional basis Ability to wear face mask, safety shoes & glasses, hairnet and gloves. No experience required, we will train! BENEFITS: Health insurance Dental insurance 401(k) 401(k) matching Employee assistance program (free counseling) Flexible spending account (FSA) Health Savings Account (HSA) Health Reimbursement Arrangement (HRA) Disability insurance Life insurance Paid time off Referral program Tuition reimbursement Vision insurance Free uniforms Safety shoe & Rx glasses reimbursement SCHEDULE: 8 hour shift Monday to Friday Day shift Night shift Overtime voluntary Full time SHIFT AVAILABILITY: 1st shift: 7:30 AM - 4:00 PM, Monday through Friday We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.