Operator jobs in Montgomery, AL

Job Details Montgomery, AL Clanton, ALDescription Plant Operator Plant Operator is responsible for maintaining the rock screening plant and heavy equipment to ensure the maximum amount of production. Responsibilities Follow company Safety Policies Monitor the operation of the rock screening plant and heavy equipment Monitor operating temperatures of drive mechanisms and components such as bearings, motors, gear boxes, pumps, etc. Monitor belt tension on both V-belts and conveyor belts, and assist Maintenance with adjustments Monitor screen tension and replace screens as needed, and assist Maintenance with adjustments Assist Maintenance with repairing/replacing rubber skirting Monitor pulleys, rollers, idlers, bearings, and shafts & report isssus to maintenance Produce daily equipment inspections and document findings Ensure greasing is performed properly on all plant equipment Work with management on planning and scheduling maintenance Follow start up and shut down procedures for the plant Ensure plant is functioning properly and at desired production rate Ensure plant is producing products satisfactory to Quality Control department Any other miscellaneous duties as assigned Qualifications Qualifications 18 years old or older Ability to operate Heavy Equipment Experience with resolving electrical issues preferred Plant maintenance experience required Heavy Equipment maintenance experience required Welding/Fabrication Can manage multiple priorities or projects simultaneously and keep them progressing to completion. Willing to work flexible hours and conditions Physical Qualifications Strength and Endurance: Ability to exert force when pushing, pulling, lifting, and carrying objects, often weighing 50 pounds. Ability to lift 100 pounds occasionally. Mobility: Frequent bending, squatting, kneeling, reaching, twisting, and climbing. Hand-Eye Coordination: Precise control of levers, pedals, and other controls on the machinery. Vision: Good depth perception and clear vision to accurately gauge distances and identify potential hazards. Hearing: Ability to hear instructions and machine sounds. Benefits Health Dental Vision 401k PTO We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Ability to operate on machine generally unassisted. Able to communicate quality issues, complete required documentation, i.e., first piece inspection, production log. Report machine malfunctions and ensure good quality product. Performs work under shift supervisor with final approval by the production manager. ESSENTIAL DUTIES AND RESPONSIBILITIES: Ability to learn and operate machines within defined specification without assistance. Recognize heating/cooling problems on all machines and report any issues immediately. Start up and shut down all machines unassisted. Recognize and perform adjustments as needed without assistance. Check oilers on trim press at shift start and fill as needed. Perform roll change with minimal scrap. Operate micro phaser and ballerina control panels to obtain readings and make adjustments as needed. Read instrumentation gauges to record "heat reading" on each machine. Perform quality checks (burning, cold cracking and registration) per roll. Learn proper packaging (boxes, poly bags) for each product type. Stock packaging material (boxes, poly bags, foam rolls) at beginning of production run. Produce product with correct width, gauge, and weight. Able to use a fire extinguisher. Understand and accurately complete required paperwork: first piece inspection, production log. Get assistance to resolve any issues to get machine back in operation. Well rounded knowledge of quality of all products. Housekeeping, must keep all areas free of debris. Ability to recognize and identify problems with machines and/or material via collection of data and interpretation of that data, Ability to apply troubleshooting techniques to issues as they arise and seek help when needed. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Ability to differentiate between "good" and "bad" quality.

National OnDemand, Inc. is a leading communications and utilities infrastructure provider offering comprehensive service solutions to the Fiber, Wireless, Energy, and Technology sectors across the United States. We specialize in delivering turnkey infrastructure solutions on demand, anywhere within our service footprint. Headquartered in Burlington, North Carolina, we have established a strong market presence through successful mergers and acquisitions, as well as steady organic growth. Our company is committed to delivering high-quality services anywhere, anytime. Primary Position Duties: * Operate directional drills, mini-excavators, and other equipment to install UG plant facilities. * Set up job equipment and reel trailers proficiently. * Perform utility exposes (potholing) and understand the utility locate process. * Locate other utilities as needed and maintain clearances from other utilities, ground, road, highway, sidewalk, and non-pedestrian areas. * Transport, handle, and place conduits (rolled and stick) in a proper manner. * Properly transport and install fiber reels. * Install fiber cables in conduits following proper procedures. * Set and secure pedestals and vaults accurately. * Read and interpret network prints. * Adhere to OSHA safety requirements to ensure safe and efficient completion of the job(s). * Maintain regular phone communication throughout the workday. * Follow directions provided by the crew leader. * Perform any other duties as assigned. Position Requirements: Working Conditions: * The employee will primarily work in the field. * The job requires working outdoors in various weather conditions. * Exposure to dust, fluctuating temperatures, and periodic high noise levels may occur. Physical Requirements:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * Use hands and fingers to handle, feel, or operate objects, tools, or controls. * Reach with hands and arms. * Stand, talk, and hear frequently. Travel: * Travel to other project sites in different states may be required to assist with new project start-ups. * Travel may be for up to a 28-day period Education or Skills: * Previous experience operating directional drills is required. * High school diploma or equivalent. * Combination of technical training and/or relevant experience. * Previous experience in a construction environment is preferred. * Must be able to meet the physical requirements of the position. * Flexibility to work nights and weekends, if necessary. * Ability to work in all weather conditions. * Valid driver's license. * Authorized to work in the United States. * Must pass drug, background, Department of Transportation (DOT), and Motor Vehicle Record (MVR) screenings. Benefits: This is a full time position with access to our comprehensive benefits which include paid time off (PTO), medical, dental, vision, short- and long-term disability, and life insurance, an Employee Assistance Program (EAP), and 401(k). EQUAL OPPORTUNITY EMPLOYER: NATIONAL OnDemand, Inc. is an equal opportunity employer. The company's policy does not discriminate against any applicant or employee based on race, gender, sex, sexual orientation, gender identity, color, religion, national origin, disability, genetic information, age, veteran status or any other consideration made unlawful by applicable federal, state or local laws. NATIONAL OnDemand, Inc. prohibits harassment of applicants and employees based on any of these protected categories.

Details** Information **Requisition Number** S4907P **Home Org Name** AES Land and Resource Mgmt **Division Name** Agriculture Experiment Station Title** Construction & Heavy Machine Operator I/II **Job Class Code** NB74 **Appointment Status** Full-time **Part-time FTE** **Limited Term** No **Limited Term Length** **Job Summary** The individual selected for this position will assist with ongoing land and facilities management responsibilities for the College of Agriculture, including (but not limited to) construction duties, planning and completing projects, and operating heavy equipment and machinery. **Essential Functions** **Responsibilities include, but are not limited to the following:** + Operates heavy equipment such as tractors, backhoes, bulldozers, excavators, trenchers, forklifts, etc. used for various construction projects on university property and may also drive semi-trucks. + Excavates, grades, and resurfaces fields and surfaces at various job sites. + Builds/renovates structures and support structures to include ponds, greenhouses, pole barns, and other buildings. + Assists in the planning and estimating of department construction projects. + May perform welding and plumbing functions in support of local facilities. Loads and transports materials from one location to another. + May be occasionally required to travel for out of town and/or overnight work. + May apply various pesticides to plants, shrubs, and trees. + Repairs and maintains equipment and vehicles ensuring that they are in proper working condition. **Why Work at Auburn?** + **Life-Changing Impact** : Our work changes lives through research, instruction, and outreach, making a lasting impact on our students, our communities, and the world. + **Culture of Excellence** : We are committed to leveraging our strengths, resources, collaboration, and innovation as a top employer in higher education. + **We're Here for You** : Auburn offers generous benefits, educational opportunities, and a culture of support and work/life balance. + **Sweet Home Alabama** : The Auburn/Opelika area offers southern charm, vibrant downtown scenes, top-ranked schools, and easy access to Atlanta, Birmingham, and the Gulf of Mexico beaches. + **A Place for Everyone** : Auburn is committed to fostering an environment where all faculty, staff, and students are welcomed, valued, respected, and engaged. Ready to lead and shape the future of higher education? Apply today! War Eagle! Minimum Qualifications **Minimum Qualifications** **Level I:** High school diploma or equivalent **Level II:** High school diploma or equivalent plus 4 years of experience in operating heavy machinery and/or construction practices. **Substitutions allowed for Experience:** When a candidate has the required education, but lacks the required experience, they may normally apply additional appropriate education toward the experience requirement, at a rate of one (1) year relevant education per year of required experience. Minimum Skills, License, and Certifications **Minimum Skills and Abilities** **Minimum Technology Skills** **Minimum License and Certifications** Class ACDL or the ability to obtain one within a year of employment Desired Qualifications **Desired Qualifications** + Current class ACDL + Knowledge/experience within essential functions Posting Detail Information **Salary Range** $33,910 - $53,590 **Job Category** Building/Grounds Maintenance **Working Hours if Non-Traditional** **City position is located in:** Auburn **State position is located:** Alabama **List any hazardous conditions or physical demands required by this position** **Posting Date** 11/14/2025 **Closing Date** **Equal Opportunity Compliance Statement** It is our policy to provide equal employment and education opportunities for all individuals without regard to race, color, national origin, religion, sex, sexual orientation, gender identity, gender expression, pregnancy, age, disability, protected veteran status, genetic information, or any other classification protected by applicable law. Please visit theirwebsite (*************************************** to learn more. **Special Instructions to Applicants** **Quick Link for Internal Postings** ******************************************* **Documents Needed to Apply** **Required Documents** **Optional Documents** 1. Resume 2. Cover Letter

Job Description WE ARE GROWING and this is NOT JUST A JOB - its A CAREER - With over 20 years' experience in the aggregates business and more than 60 years in the construction materials industry, Foley Materials Company continues to grow and we want YOU to join our team. American Owned. American Operated. Responsibilities: In accordance with MSHA and Company standards, take a proactive role in prioritizing safety on the job for yourself and others. Safely operate heavy equipment needed, safely and efficiently, including haul trucks, loaders, excavators, dozers, etc. Conduct pre and post-operation inspections of equipment and perform routine maintenance and minor repairs as needed to ensure equipment is in good working condition. Complete reports/documentation as required. Monitor the plant and operations and report any unsafe behaviors, unsafe conditions, necessary maintenance, etc. Coordinate with other team members to ensure smooth operations and project timelines Other duties as assigned We Are An Equal Opportunity Employer Comprehensive Benefits Package includes: Competitive PTO + 8 paid company holidays; weekly pay, medical, dental, vision, STD and life insurance, Company funded HSA; Voluntary Life Insurance; 401(k) with competitive company match; Employee Assistance Program (EAP) Knowledge, Skills, and Abilities: Experience operating heavy construction/mining equipment - 1-2 years Experience operating a haul truck or loader is required - 1 - 2 years Must be willing to work overtime and extended hours depending on production need. Ability to troubleshoot and perform basic mechanical maintenance on excavator, other heavy equipment Strong attention to detail and safety protocols Excellent communication skills and the ability to work well with other team members. Ability to work in physically demanding environments and in various weather conditions. Physical Requirements: Work up to 12 hour shift Will climb and maintain balance on steel/wood framework, equipment, stairs, ladders, etc. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis Must be able to comply will all safety standards and procedures May reach above shoulder heights and below the waist on a frequent basis May stoop, kneel, or bend on an occasional basis Ability to wear required personal protective equipment (PPE) (including but not limited to hard hat, steel toed boots, gloves, safety glasses, hearing protection, etc.) Move in and around confined, cluttered and uneven areas This list is not all inclusive

Salary Information Compensation plans are based on a multi-step progression system. The pay range reflects the entry level and maximum salary potential in the assigned pay grade. **A starting salary may be negotiated and will be commensurate with education, training and experience in alignment with pay administration policies and Montgomery Personnel Board Rules & Regulations** Nature of Work The fundamental reason this classification exists is to perform skilled work in the operation of a variety of heavy automotive and related equipment. Employee in this class is responsible for the safe and efficient operation of heavy automotive and related equipment used in construction and maintenance activities. The operation of this equipment frequently entails considerable manipulative difficulty, and considerable importance is attached to the ability to effectively perform specialized tasks for which equipment is designed. Normally work is performed on one specified type of equipment, though employee is required to operate other units or perform semi-skilled laboring tasks during slack or seasonal period. The major work responsibilities may include: drives and operates heavy weight dump trucks and lowboy tractor trailers; operates dozers, motor graders, trash compactors, elevated earth mover scrapers, excavators, backhoes, and front end loaders; services and performs basic preventive maintenance checks; and performs manual labor work as required. Employee reports to the Assistant Solid Waste Superintendent and/or the Solid Waste Superintendent. Distinguishing Characteristics: This class is distinguished from Heavy Equipment Operator I in that the Heavy Equipment Operator II classification requires more skill in operating and maneuvering power-driven equipment in completing tasks. This class is distinguished from Construction Equipment Operator in that Heavy Equipment Operator IIs do not supervise subordinate employees in the absence of the Assistant Solid Waste Superintendent. The Construction Equipment Operator classification also requires more skill in operating construction and maintenance equipment. Minimum Qualifications Two years of experience and/or training that include operation of heavy equipment such as a dozer, motor grader, dump truck, trash compactor, earth mover scraper, excavator, backhoe, lowboy tractor trailer and front-end loader in public works, utilities, construction or a related field. Must possess at least a Class B Commercial Driver's License. NOTE: Qualifying education, training and experience that provide the requisite knowledge, skills and abilities to perform the job will be considered. Special Requirements Must obtain and maintain ADEM Certified Landfill Operator Certification within four years of employment. Must possess and maintain a valid Alabama driver's license. Must be able to work weekends, holidays and overtime as needed to perform job duties. PHYSICAL ABILITIES: Physical ability to lift 50-75 pounds, assisted as needed to pick up equipment parts, a fusion welder, air wrench and to change tires. Physical ability to work outdoors as needed to operate equipment from an open or enclosed cab while being exposed to extreme conditions (hot and cold temperatures, rain, dust and dirt). Physical ability to sit for extended periods of time (up to eight hours) in order to operate heavy equipment as well as physical ability to stand, stoop, bend or kneel for periods of time to inspect equipment or perform preventive maintenance on equipment. Kind of Examination Applications are being accepted to fill one (1) vacancy and any other vacancies that may occur during the life of the register. The current vacancy is with the City of Montgomery Landfill. Applicants will be screened and qualified based upon education and experience as shown on the application and supplemental questionnaire. For this reason, applicants are urged to fill in the application form and supplemental questionnaire completely providing detailed information concerning the kinds of jobs they have held, the dates they held them, where and exactly what their duties were. If more than five qualified applications are received, a selection procedure will be administered to rank applicants on the register. Tied scores will not be broken. If there are five or less qualified applicants, they will be considered equally qualified and placed on the register in alphabetical order. Complete an online application by visiting Montgomery Personnel Board's Online Employment Center. Paper applications are no longer accepted. Completed applications will be accepted online until 11:59 p.m. on the closing date. If there is no closing date, the announcement may be closed at any time without prior notice. Additional Information BENEFITS: Employees are offered a competitive benefits package which includes health, dental, and life insurance, paid annual and sick leave, paid holidays, and a retirement program. DRUG TEST: Employment may be conditional upon the potential employee passing a pre-employment drug test. (The drug test may require the submission of a sample of hair, finger nails, and/or urine that will verify illegal drug use). BACKGROUND CHECK: Employment may be conditional upon the potential employee passing a background check. (Candidates will be asked to provide consent prior to the administration of background checks.) EQUAL EMPLOYMENT OPPORTUNITY: Discrimination against any person in recruitment, examination, appointment, training, promotion, retention, discipline, or any other aspect of personnel administration because of political or religious opinions or affiliations or because of race, national origin, or any other non merit factors is prohibited. Discrimination on the basis of age, sex, or physical disability is prohibited except where specific age, sex, or physical requirements constitute a bona fide occupational qualification necessary to proper and efficient administration. REQUEST FOR ACCOMMODATION: Under the Americans with Disabilities Act, it is the responsibility of the applicant with a disability to request accommodation which he/she requires in order to participate in the application or examination process. The Personnel Department reserves the right to require documentation of the need for accommodation under the ADA. In order to request accommodation in the application or testing process, contact the Personnel Director at (334) 625-2675. I9: Prior to your employment, you will be required to provide to your employer documentation of your identity and employment eligibility in order to comply with the Immigration Reform and Control Act of 1986. UPDATE OF CONTACT INFORMATION: It is your responsibility to update your contact information (address, phone, email) so that we can contact you about jobs. Please visit the Update Contact Information page to log in and update to your contact information at any time.

Job DescriptionDescription: Part Production Operators set-up, operate, load, and maintain machinery. They are responsible for ensuring the machine produces high quality products, runs smoothly and at capacity, and is properly maintained. Primary Functions and Responsibilities Inventory control of parts and material Operates production machinery in accordance with prints and specifications (assigned machines may include lathes, grinders, mills, and similar equipment) Produces the required quantity of parts within the specifications and tolerances Measures finished parts with precision tools, ensuring compliance of function, quality, and cosmetic specifications Maintains logs and records of units produced including records of errors resulting in rejected or discarded pieces Inspects equipment prior to use to ensure proper setup and alignment, performs basic and routine adjustments and maintenance Follow 5S housekeeping standards Performs other duties as assigned Requirements: Knowledge, Skills and Abilities Thorough understanding of or the ability to quickly learn production equipment Understanding of and the ability to abide by applicable OSHA and environmental regulations The ability to read and understand customer drawings. Fork truck operations Minimum Qualifications Ability to follow directions and work well in a team Strong analytic problem solving skills and basic math skills Work Environment Warehouse environment (non-temperature-controlled environment) Capable of lifting up to 30 lbs on a regular basis Ability to stand for 8+ hours

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. As a Secondary Machine Operator you will be responsible for safe and efficient operation of drilling and sawing machinery. Work is performed in accordance with the instructions provided by the department supervisor or manager (or other designated individual). The employee is expected to carry out the assignments, free of direct supervision, except for more complicated jobs. Shift: 7:00am - 3:00pm Monday - Friday What you will do as a Secondary Machine Operator Setup and safely operate single spindle, multiple spindle, radial-armed drills, and cut-off saws. Lay out and perform drilling, tapping, reaming and sawing functions per blueprint specifications. Read and interpret STERIS blueprints, Geometric Dimensioning and Tolerancing (GD&T) including travelers, and other working documents. Maintain equipment by ensuring the proper coolant concentration and oil levels are present, including adding coolants and oils when necessary. Apply cutting and tapping fluids to materials and cutting tools to reduce heat and assist with chip removal. Use required measuring instruments and gages to check and ensure parts meet dimensional requirements. Complete all projects, assignments, and duties as directed and instructed by the area supervisor. Take responsibility for the quality of all parts by inspecting and immediately reporting any problems, discrepancies or irregularities to the supervisor. Follow 5S methodology to keep machines and work area clean, neat and orderly on a daily basis. Remain safety conscious at all times, wearing all prescribed personal protective equipment and by observing all safety rules stated in the Employee Handbook. Conform to all policies, procedures and rules of conduct as communicated through the Employee Handbook. Ability to perform duties with minimal or no supervision if needed. Exhibit teamwork by working cohesively with co-workers to continuously improve. The Experience, Skills and Abilities Required: Must be able to read and interpret blueprints. Must be able to use precision measuring instruments and gages. Must be capable of lifting 40 pounds without assistance. Other: Knowledge, understanding and application of Lean Manufacturing tools, such as, 5S, Kanban Inventory, Visual Management, Waste elimination, and Root Cause Problem Solving are preferred. Ability to make decisions and stay quality focused. Ability to communicate effectively with co-workers and members of the leadership team. Assist with training other operators. Ability to understand and follow work instructions, both written and oral. Ability to adapt to conditions as dictated by business requirements. Ability to work with others. Willingness to work overtime, if required. What STERIS Offers We Value our employees and are committed to providing a comprehensive benefits package that supports your heath, well-being, and financial future. Here is just a brief overview of what we offer: Market Competitive Pay Extensive Paid Time Off and (9) added holidays Long/short Term disability coverage 401(k) with company match Maternity & Paternal Leave Additional add-ons benefits/discounts for programs such as Pet Insurance Tuition Reimbursement and continues educations programs Excellent opportunities for advancement and stable long-term career Pay range for this opportunity is $16.14 - $20.89. This position is eligible for bonus participation. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is a leading global provider of products and services that support patient care with an emphasis on infection prevention. WE HELP OUR CUSTOMERS CREATE A HEALTHIER AND SAFER WORLD by providing innovative healthcare and life sciences products and services around the globe. For more information, visit *************** If you need assistance completing the application process, please call ****************. This contact information is for accommodation inquiries only and cannot be used to check application status. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity. The full affirmative action program, absent the data metrics required by § 60-741.44(k), shall be available to all employees and applicants for employment for inspection upon request. The program may be obtained at your location's HR Office during normal business hours.

Lear For You We work hard for the people who work for us. We champion our teams. We foster collaboration, inclusion, respect and excellence. What we are trying to say is we want to be more for you. We are your path to a better career, a better future, and a better you. Our teams have invented groundbreaking technologies, flawlessly manufactured millions of products and earned a long list of awards. Year after year, we are one of the World's Most Admired Companies. Our teams are the secret to our success. They are empowered, inventive and inclusive. Passionate about their craft. Driven to succeed. Because we all understand that we must work together to win. Are you ready for a better career? A better future? We're Lear For You. PRODUCTION OPERATOR SELMA, AL - SELMA PLANT The primary role of the Production Operator is to manufacture quality products in a safe manner. The operator will be responsible for inserting various components into molds, removing the finished products from the molds, cleaning the molds, inspect/repair the finished goods as necessary prior to shipment of the products to the customer. The role may require the use of simple hand tools and/or special assembly tools. The Role: Your work will include, but not be limited to: * Place all applicable inserts (support wires, Velcro, seat frames, felt pieces, etc.) into the seating molds as specified by customer standards. * Removes finished foam seating pads from their molds, places parts on a conveyer for the next stage of the finishing process and removes any obvious foam particles from the molds * Removes any obvious foam particles from molds and applies a thin layer of demolding agent (aerosol wax) to the surface of the molds. * Inspect product quality * Repair marked defects and cut it back to contour of part * Pack finished goods according to placard specification * Disassemble scrapped products to salvage material. * Cleaning surrounding work areas * Perform all other duties as assigned Advantages of working for Lear at the Lear Selma: * Wide range of Benefits (Medical, Dental, Vision, 401K, Tuition Reimbursement, etc.) * Advancement Opportunities Your Qualifications (Minimum Qualifications): * High School Diploma or GED * Ability to pass pre-hire requirements (Background check, Drug Screening, etc.) Bonus If You Have (Preferred Qualifications): * Light to medium manufacturing experience Physical Requirements: * Ability to stand and/or walk long periods of time. Lear Corporation is an Equal Opportunity Employer, committed to a diverse workplace. Applicants must submit their resume for consideration using our applicant tracking system. Due to the high volume of applications received, only candidates selected for interviews will be contacted. Candidates must be legally authorized to work in the United States without sponsorship. Unsolicited resumes from search firms or employment agencies, or similar, will not be paid a fee and will become the property of Lear Corporation. Location Code: 0179 Nearest Major Market: Selma

We are excited about your interest in a lumber manufacturing career. Rex Lumber is committed to providing its team members with an exceptional company culture and employment experience. If you want a career, not a job, and you want to experience big company benefits with an intimate company feel, come join the Rex Lumber team! You have an opportunity to join a fantastic team and be our newest contributor. SUMMARY OF FUNCTIONS Operate and monitor area equipment throughout the mills and yard to ensure to include: hang-ups with lumber or equipment, position of lumber when reaching next machine center. ESSENTIAL DUTIES AND RESPONSIBILITIES Set-up, operate and maintain machine centers in accordance with Standard Operating Procedures Clear lumber/equipment hang-ups Ensure lumber is in proper position before arriving at next machine center Clean and align optimizers and change saws and guides as needed Clean workstation and surrounding area making sure it is clean and free of debris Lubricate components as necessary Control machine center input and output, lumber flow and speed Complete production tallies, downtime tallies and daily reports as required Stop or reset equipment or machines when malfunctions occur, clear machine jams, and report malfunctions to a supervisor Assist other operators loading and unloading lumber as necessary Participate in action planning process All other duties assigned by supervisor SKILLS AND QUALIFICATIONS Possess adequate fitness and stamina to conduct strenuous and physically demanding tasks. Understand and follow oral or written instructions issued by supervisors. Able to clearly explain problems or give instructions to others involved in keeping operations running smoothly. Able to perform the job with limited supervision. Understand basic mathematical skills. Understand basic machine components and operation, including working around moving mechanical parts and vibrations. Perform routine maintenance on equipment and determining when and what kind of maintenance is needed. Ability to watch gauges, dials, or other indicators to ensure a machine is working properly. Arrive on time and stay on task to contribute to better output and reaching production goals. Able to work well in an industrial environment, and as part of a team. PHYSICAL REQUIREMENTS Must be able to work a 12-hour shift. Must be able to work overtime. Perform tasks such as walking, climbing, or standing for long periods of time. Able to bend, stoop, stretch, twist, or reach with body, arms, and/or legs. Ability to exert muscle force repeatedly or continuously over time. Ability to work outside in all conditions. Must be comfortable working around loud equipment. Able to work while in a harness at heights over 4 feet. Able to lift 50 lbs. throughout work shift. SAFETY Follow all area/machine center specific safety regulations. Wear all the required personal protective equipment, i.e., hardhat, safety glasses, hearing protection, and reflective wear. Report immediately to your supervisor or any available supervisor any piece of equipment that is unsafe or functioning improperly to eliminate unsafe conditions. Do not enter restricted areas. Request assistance when a task exceeds individual knowledge. Visually inspect equipment and area before starting/operating. Use Standard Lockout Procedures when appropriate for machine centers. Use proper lifting technique by pushing, pulling, and lifting with your legs and not your back. Never approach a saw while it is still running. Follow all other safety regulations as set forth by the company. COMPANY BENEFITS We offer outstanding benefits that includes Company Paid Health Insurance Prescription Drug Insurance Dental and Vison Insurance Telemedicine Program through Teladoc Wellness Incentives Paid Time Off 7 Paid Holidays Term Life Insurance, Accidental Death Insurance, Critical Care Insurance Employee Assistance Program Strive Rewards Program Employee Referral Program Safety Incentives Uniform Rental Boot Loans

Job Posting TitleEquipment OperatorJob Description About Circular Services: Circular Services is the largest privately held recycling and organics service provider in the U.S. It operates over 25 facilities serving major long-term municipal and commercial contracts. The mission of Circular Services is to keep valuable materials in circulation and minimize the cost and environmental impact of landfills. The company services municipal contracts with some of the largest and fastest growing cities in the U.S. including New York City, Austin, San Antonio, and Phoenix. About the Role: The Equipment Operator operates equipment to include frontend loader with bucket, 12k forklift or smaller with rotator, bobcat and skid steer. Operators are to follow all Balcones Resources safety regulations and golden rules. Operator will provide pre-shift and end of shift inspections and is responsible for greasing and daily upkeep of equipment and work areas. Responsibilities: Performs routine maintenance on loader such as lubricating, fueling and cleaning. Completes inspection report prior to using equipment. Safely operate machinery under the direction of the shift supervisor or production manager. Load trucks, pile scrap material, load/unload barges and rail cars End of shift clean up and equipment inspection. Regularly clean equipment to preserve its quality and functionality. Commit to the overall safety of the work environment. Sweeps and shovels residual waste from process. Other duties may be assigned. Qualifications: High School diploma or general education degree (GED) Valid Driver's license Minimum of 12 months related experience and/or training; or equivalent combination of education and experience Working Conditions: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand and reach with hands and arms. The employee is frequently required to walk; use hands to finger, handle, or feel; climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit and talk or hear. The employee must regularly lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. EEOC: Circular Services is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Circular Services is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Circular Services are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Circular Services will not tolerate discrimination or harassment based on any of these characteristics.

Duties and Requirements of the Job: * Manually or semi-automatically install components to tubes. * Load and unload benders are required. Being able to lift up to 30 lbs. * Check quality of assemblies and visually inspect. * Perform audits as required. * Run parts according to production schedule. Skills Required: * One (1) plus years of industrial experience preferred. * Must be able to measure, chart statistical process control (SPC) data, add, subtract, multiply, and divide. * Computer skills needed. * Sufficient understanding of the English language in order understand Hanil USA processes.

Essential Duties and Responsibilities: Must be able to perform repetitive motion in an assembly process. Assembly work requires standing for extended periods of time, no sitting permitted. Team Member must be able to lift 40 pounds without assistance. Assembly work requires continuous movement; twisting, bending, walking. Assembly work requires Team Members to have good eye/hand coordination. Assembly work checks for damages and defects and monitors quality closely This job description in no way implies that these are the only duties to be performed. An employee will be required to follow any other job-related duties required by the manager. Qualifications/Requirements: Candidate shall also possess a willingness to work with a diverse group and adapt to cultural differences. Must have good visual inspection skills. Must be able to wear various types of Personnel Protective Equipment (PPE). Good written and verbal skills. Ability to adapt flexibly in a fast paced environment. Ability to work within a team environment. Interpersonal skills, time management, organizational skills, and ability to multi-task. Ability to work rotating shifts including weekends, holidays, and plant shut downs. Education/Training/Experience: Required, High School Diploma or GED Certificate

United Land Services (ULS), in partnership with River Region Sports, is a nationally recognized leader in the construction and maintenance of high-quality athletic fields. We cater to a diverse clientele, including colleges, universities, municipalities, and professional league teams. We are seeking a dedicated and experienced Project Superintendent/Heavy Equipment Operator to join our team. This role offers the opportunity to work outdoors, travel, and contribute to the creation of top-tier sporting facilities. You would be responsible for overseeing daily field operations for athletic field and site construction projects. This includes supervising crews, coordinating materials and equipment, operating heavy machinery, and ensuring all work meets project specifications, schedules, and safety standards. Projects may include grading, drainage installation, base construction, synthetic turf preparation, demolition, and related site work. ULS stands out for its commitment to excellence and innovation in sports field construction, providing a dynamic and rewarding work environment. Responsibilities Oversee daily site operations and manage projects from inception to completion. Operate heavy equipment with precision, ensuring accuracy in grading, drainage, and base preparation for synthetic turf installations. Read and interpret construction plans, ensuring compliance with design specifications. Coordinate crews and subcontractors, ensuring work is completed efficiently and on schedule. Maintain project timelines, track progress, and address any on-site challenges. Enforce OSHA regulations and company safety protocols to maintain a safe work environment. Communicate effectively with project managers, clients, and team members. Qualifications Proven experience as a Project Superintendent and Heavy Equipment Operator. Proficiency in operating excavators, dozers, and skid steers with GPS and laser grading technology. Strong knowledge of grading, drainage, and site preparation. Ability to read and interpret blueprints, construction drawings, and site plans. Excellent leadership, communication, and problem-solving skills. Willingness to travel as required. Benefits Access to Health, Dental, Vision, Life Insurance, and matching 401K plans. Paid Time Off (PTO) offered after 90 days. Enjoy weekly pay every Friday. Immediate start dates are available to get you working promptly.

The purpose of this position is to operate heavy equipment in the collection of solid waste. Job duties consist of related equipment operation duties. Successful performance contributes to the provision of efficient and effective services to customers. FLSA status is Non-Exempt. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES The following duties are normal for this classification. The omission of specific duties does not exclude them from the classification if the work is similar, related, or logical assignments for this classification. Other duties may be required and assigned. Specific duties listed may not be required for all positions in this classification, but are determined by the normal requirements for this particular position. EQUIPMENT OPERATION DUTIES (70%) Operates a truck on an assigned route to collect solid waste. Operates truck packing device to compress the garbage. Removes spilled garbage, trash, or debris from curbs, streets, storm drains, and rights-of-way. Handles garbage cans, trash receptacles, and trash bags; returns permanent containers to the original location. Notifies supervisor of containers in need of replacement. Operates a knuckle-boom truck as needed. Operates a tractor-type limb loader and/or trash compactor vehicle. Communicates with co-workers and management over the radio. Travels to the landfill and transfer station to dispose of full trucks multiple times a day. EQUIPMENT MAINTENANCE DUTIES (10%) Performs pre- and post-trip equipment inspections. Cleans equipment interior and exterior. Performs minor maintenance and repair duties. Reports major repair needs to supervisor. Keeps trucks fueled as needed. CUSTOMER SERVICE RESPONSIBILITIES (10%) Posts notices as required regarding collection policies. Refers customer complaints and concerns to appropriate supervisor. Ensures that all trash is collected and that each site is clean. Rides back of rear platform collecting solid waste, yard debris, and recyclables as needed. Ensures garbage cans are emptied safely and in accordance with the City of Prattville policies and procedures. OTHER RELATED DUTIES (10%) Maintains any required records. Performs other duties as needed or assigned. Removes dead animals from the rights of way. Participates in the training of new employees. Works at the Recycle Center periodically throughout the week and some Saturdays throughout the year. MINIMUM QUALIFICATIONS One (1) year of experience in the operation and maintenance of heavy equipment. Must be twenty-one (21) years of age or older. Must have a Class "A" Drivers' License. MINIMUM REQUIREMENTS TO PERFORM ESSENTIAL JOB FUNCTIONS The following requirements are normal for this classification. Specific requirements may not apply to all positions within this classification but are determined by the normal requirements for the particular position. The following list was developed through job analysis; however, it is not exhaustive and other duties may be required and assigned. Job duties are typically performed while sitting, standing, bending, crouching, or stooping. Employees occasionally lift light and heavy objects, climbs ladders, uses tools or equipment requiring a high degree of dexterity, and utilizes the sense of smell. Job duties are typically performed outdoors, occasionally in extreme or inclement weather. Employees are exposed to dust, dirt, grease, and machinery with moving parts. Job duties require the use of protective devices such as masks, goggles, or gloves. Job duties require the ability to deal with and relate to people beyond giving and receiving instructions. Job duties require the ability to talk, express, or exchange ideas by means of spoken words and/or hear and perceive the nature of sounds by ear. Job candidates must be able to adapt to and perform under moderate stress. Job duties require regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards. KNOWLEDGE, SKILLS, AND ABILITIES: City of Prattville employees are required to obtain knowledge of the City of Prattville Policies and Procedures, and knowledge of their specific department rules, policies, and procedures. This does not necessarily include all the duties which may be required of individual employees in the classification. Job descriptions may be revised as needed. Knowledge of department and city policies and procedures, and relevant federal, state, and local laws and regulations. Knowledge of the techniques, equipment, and supplies used in the collection and transport of solid waste. Knowledge of the geography of the city, including street names and locations. Knowledge of work safety principles and practices. Skill in the operation of assigned vehicles, trucks, and heavy equipment. Skill in oral and written communication. Skill in using independent judgment and discretion. Skill in working under pressure and meeting deadlines. Skill in the use of hand and power tools. Skill in prioritizing and organizing work. Skill in interpersonal relations. SUPPLEMENTAL INFORMATION: Must provide proof of your legal right to work in the United States. Must possess and maintain a valid driver's license. Must be able to lift 50 pounds repeatedly. High School Diploma/GED preferred. Willing to work overtime. Willing to cooperate with the workload of the department. Willing to attend continuing education courses. Willing to comply with City of Prattville rules and regulations. Must submit to drug screenings for this safety sensitive position. Must accomplish the essential functions of the job, with or without reasonable accommodations, in a timely manner. EEOC COMMITMENT: The City of Prattville is committed to maintaining equal employment opportunity by considering job applicants and employees for hiring and advancement on the basis of job-pertinent individual differences and not on the basis of extraneous factors such as race, color, religion, sex, national origin, physical and mental disability, marital status, sexual orientation, genetics, status as current or former uniformed service member, or any other classifications protected by law. The City of Prattville offers a comprehensive benefits package including vacation, sick, and holiday leave as well as medical, dental, vision, and short term disability insurance. Benefits coverage is effective on the first day of the month following a 30 day waiting period for new hires. Late enrollees are subject to approval by the insurance company. Group Medical Benefits-Through Blue Cross and Blue Shield of Alabama, benefits provide members with hospitalization, office visits, and Prescription drugs (Administered through Express Scripts). Family, 2 person and individual plans are available. Complete benefits information is available in the plan document. City of Prattville Health & Wellness Center-The City of Prattville offers an on-site wellness center to employees covered under the group health insurance plan. The Wellness Center offers convenient, co-pay free medical and prescription drug coverage for employees and their dependents. Group Life Insurance-all regular employees receive a life insurance policy. Employees with less than 10 years of service receive a $10,000 policy and employees with 10 years of service or more receive a $20,000 policy. Retirement-Through the Retirement Systems of Alabama, this benefit requires mandatory enrollment for all regular employees as of the first day of employment. Employees are classified as Tier I or Tier I (A) with the Retirement Systems of Alabama. The employee pays a percentage of all gross income specified by RSA. The City provides a matching amount determined by RSA. A Tier I employee is an employee who was a member of the Retirement Systems of Alabama prior to January 1, 2013. A Tier I employee may retire if he/she has 25 years of retirement service, or is age 60 with 10 years of service with the Retirement Systems of Alabama. (Regular Members 5% of earnable compensation; Full time, Certified Firefighters and Law Enforcement Officers 6% of earnable compensation.) A Tier I (A) employee is an employee who became a member of the Retirement Systems of Alabama after January 1, 2013, and by local resolution and Act 2019-32 by the Alabama Legislature became a Tier 1 employee. A Tier I (A) employee may retire if he/she has 25 years of retirement service, or is age 60 with 10 years of service with the Retirement Systems of Alabama. (Regular Members 7.5% of earnable compensation; Full time, Certified Firefighters and Law Enforcement Officers 8.5% of earnable compensation.) Deferred Compensation (457 Plans)-Voluntary participation allows the employee to lower taxable income, and pay tax on the deferred income in the year of distribution. The City has 457 Plans through Nationwide Retirement, AIG Valic Financial Advisors, RSA-1, and Alabama Deferred Compensation. The employee may contribute up to the current allowable limits. All regular employees are eligible on the first day of employment. Supplemental Insurance-Employees may obtain coverage for Dental, Cancer, Disability, Accident, and Life Insurance. The City of Prattville offers payroll deduction for supplemental insurance. The employee pays for all supplemental insurance coverage. You are eligible upon purchasing coverage and meeting eligibility requirements. Flexible Spending Account-Allows employees to lower their taxable income by placing certain insurance premiums under this plan. Also, offers unreimbursed medical/dental expense benefits, as well as daycare expense benefits. Vacation Leave- 8 Hour Employees Vacation leave is earned at the following accrual rates for regular full-time employees. Completed 6 months - 40 hours (5 days) Completed 1 year - 40 hours (5 days) Completed 2nd year through 9th year accrues 80 hours (10 days) per year 10 years through 15 years accrues 120 hours (15 days) per year 16 years and over accrues 160 hours (20 days) per year The maximum vacation leave that may be accrued is 360 hours for 8-hour shift employees. The City administers the time and pays for accrued leave time. 12 Hour Employees (Watewater) Vacation leave is earned at the following accrual rates for regular full-time employees. Completed 6 months - 42 hours (3.5 days) Completed 1 year - 42 hours (3.5 days) Completed 2nd year through 9th year accrues 84 hours (7 days) per year 10 years through 15 years accrues 124 hours (10 days) per year 16 years and over accrues 168 hours (14 days) per year The maximum vacation leave that may be accrued is 378 hours for 12-hour shift employees. The City administers the time and pays for accrued leave time. 24 Hour Employees (Fire) Vacation leave is earned at the following accrual rates for regular full-time employees. Completed 6 months - 60 hours (2.5 days) Completed 1 year - 60 hours (2.5 days) Completed 2nd year through 9th year accrues 120 hours (5 days) per year 10 years through 15 years accrues 180 hours (7.5 days) per year 16 years and over accrues 240 hours (10 days) per year The maximum vacation leave that may be accrued is 504 hours for 24-hour shift employees. The City administers the time and pays for accrued leave time. Sick Leave- 8 Hour Employees Sick leave is earned at the rate of 80 hours per year with no accrual limit. Retiring employees have the option of receiving payment for the accrued sick leave (up to 360 hours) or converting the leave to service time. The City administers the time and pays for accrued sick leave. You are eligible upon completion of the first full pay period after your hire date. 12 Hour Employees (Wastewater) Sick leave is earned at the rate of 84 hours per year with no accrual limit. Retiring employees have the option of receiving payment for the accrued sick leave (up to 378 hours) or converting the leave to service time. The City administers the time and pays for accrued sick leave. You are eligible upon completion of the first full pay period after your hire date. 24 Hour Employees (Fire) Sick leave is earned at the rate of 120 hours per year with no accrual limit. Retiring employees have the option of receiving payment for the accrued sick leave (up to 504 hours) or converting the leave to service time. The City administers the time and pays for accrued sick leave. You are eligible upon completion of the first full pay period after your hire date. Holidays-Twelve paid holidays per year. The City Council determines the holiday schedule for each fiscal year. For Detailed Benefits information please visit our Benefits Web Page at ******************** 01 Position requirements mandate a minimum age of 21. Are you 21 years of age or older? * Yes * No 02 This position requires one (1) year of experience in operation and maintenance of heavy equipment. Do you meet this qualification? If yes, these employers and/or volunteer experience must be listed on your employment application with a description of your primary duties and responsibilities. * Yes * No 03 This position requires a Class A Commercial Driver's License. Do you have a current Class A CDL? If you answered yes, please list the DL number and expiration date. 04 If you answered "YES" to having a Commercial Driver's License (CDL), the City of Prattville will conduct a limited query of the Federal Motor Carrier Safety Administration (FMCSA) Commercial Driver's License Drug and Alcohol Clearinghouse to determine whether you have any drug or alcohol violations. Are there any reasons you would not be cleared? * Yes * No Required Question Employer City of Prattville Address 101 West Main Street Prattville, Alabama, 36067 Phone ************ ************ Website http://********************

Job Description Kumi Manufacturing Alabama, LLC 2nd and 3rd Shift *Only* DESCRIPTION- HOURLY POSITION Molding Machine Operator To remove product from conveyor or machine, inspect to customer specifications and hand pack into prescribed carton. ESSENTIAL FUNCTIONS: Review and follow steps outlined in the Operation Standard each day before producing parts 5s Principles must be a priority Scrap parts that do not meet specifications Regrinds or disposes of scrap Reports any equipment malfunction and/or quality problem to team coordinator Accurately record scrap & press downtime in Plex Performs PVL (confirms that label applied to container matches parts packed in container) Reports any accidents, incidents, or hazardous situations to the Process Coordinator immediately Keep Floater, Coordinator, or Process Tech apprised of material or tooling needs ADDITIONAL RESPONSIBILITIES: May drive a forklift to load/unload parts and/or materials if eligible to obtain KMA forklift license May help conduct periodic inventory May train new press operators Any other duties as assigned by Molding Department Management EDUCATIONAL / EXPERIENCE: None Required QUALIFICATIONS: Requires ability to stand for the entire shift Requires ability to bend, stoop, or kneel frequently Requires ability to work in a noisy industrial environment Requires mental alertness to procedures/changes and to call for assistance when needed Ability to keep up with moderate-speed conveyor line Manual dexterity required Satisfactory work records, including attendance Ability to lift 12 to 35 lbs Willingness to work overtime during the week and weekends when needed High degree of attention and care required to prevent injury to self and others

Job Details Montgomery, AL Clanton, ALDescription Heavy Equipment Operator The Heavy Equipment Operator is responsible for day-to-day activities of the assigned equipment. The HEO is responsible for the safe and productive use of assigned equipment. Responsibilities Maintain clean and Safe operating equipment. Maintain a clean, safe, drug-free worksite. Participate in all safety meetings and discussions. Perform and turn in daily equipment inspection sheets. Perform and turn in daily production quantities. (Load counts, Tonnage and Time) Understand the site's daily production and strive to beat the budget. Understand material specifications, and adjust keep material in spec. Participate in training opportunities for coworkers for cross-training. Ensure the equipment is inspected upon arrival and cleaned and fueled before leaving the job. Communicate equipment maintenance and repair needs to Site Supt. immediately. Report all accidents and/or incidents to management immediately. Grease and Fuel equipment daily. Remove all trash and sweep out equipment daily. Effectively communicate using two-way radios with other operators and ground crew. Perform other duties as required by Management. Qualifications Qualifications Experience operating heavy machinery(excavator, front end loader, articulated truck, dozer) Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Strength and Endurance: Ability to exert force when pushing, pulling, lifting, and carrying objects, often weighing up to 50 pounds or more occasionally. Mobility: Frequent bending, squatting, kneeling, reaching, twisting, and climbing. Hand-Eye Coordination: Precise control of levers, pedals, and other controls on the machinery. Vision: Good depth perception and clear vision to accurately gauge distances and identify potential hazards. Hearing: Ability to hear instructions and machine sounds. Balance and Stability: Maintaining proper posture while operating machinery in varying terrains. Able to climb in and out of equipment safely Benefits Health Dental Vision 401k PTO

Salary Information Compensation plans are based on a multi-step progression system. The pay range reflects the entry level and maximum salary potential in the assigned pay grade. **A starting salary may be negotiated and will be commensurate with education, training and experience in alignment with pay administration policies and Montgomery Personnel Board Rules & Regulations** Nature of Work The fundamental reason this job exists is to operate heavy automotive equipment used for various division operations for the City of Montgomery. Duties include basic maintenance on equipment, and driving and operating equipment. Employees operate a variety of equipment such as bulldozers, scrapers, front-end loaders, hauling equipment, and tractor/trailers. Normally work is performed on one assigned type of equipment, though the employee may be required to operate other pieces of heavy equipment. The majority of the Heavy Equipment Operator I's time is spent on large-sized equipment such as bulldozers, lowboys, backhoes, and front-end loaders. They typically work under the direction of a specialized crew supervisor and may supervise Equipment Operators and Service Maintenance Workers dependent on departmental organization. Minimum Qualifications One year of experience in the operation of heavy equipment such as bulldozers, front end loaders, tractors and/or scrapers. NOTE: Qualifying education, training and experience that provide the requisite knowledge, skills and abilities to perform the job will be considered. Special Requirements Heavy Equipment Operator I's must be willing to work in a variety of weather conditions with exposure to the outdoor elements. They are required to travel across rough, uneven or rocky surfaces at the various work sites. Qualified applicants must have a Class A or B Commercial Driver's License. Some positions may require a Tanker Endorsement. Kind of Examination Applications are being accepted to fill one (1) vacancy and any other vacancies that may occur during the life of the register. The current vacancy is with the City of Montgomery Parks and Recreation Department. Applicants will be screened and qualified based upon education and experience as shown on the application. For this reason, applicants are urged to fill in the application form completely, providing detailed information concerning the kinds of jobs they have held, the dates they held them where and exactly what their duties were. if more than five qualified applications are received, the application will be scored to rank the qualified applicants on the eligible register and tied scores will not be broken. if there are five or less qualified applicants, they will be considered equally qualified and placed on the register in alphabetical order. Complete an online application by visiting Montgomery Personnel Board's Online Employment Center. Paper applications are no longer accepted. Completed applications will be accepted online until 11:59 p.m. on the closing date. If there is no closing date, the announcement may be closed at any time without prior notice. Additional Information BENEFITS: Employees are offered a competitive benefits package, which includes health, dental, and life insurance; paid annual and sick leave; paid holidays; and participation in the Retirement Systems of Alabama (RSA) retirement program. DRUG TEST: Employment may be conditional upon the potential employee passing a pre-employment drug test. (The drug test may require the submission of a sample of hair, finger nails, and/or urine that will verify illegal drug use). BACKGROUND CHECK: Employment may be conditional upon the potential employee passing a background check. (Candidates will be asked to provide consent prior to the administration of background checks.) EQUAL EMPLOYMENT OPPORTUNITY: Discrimination against any person in recruitment, examination, appointment, training, promotion, retention, discipline, or any other aspect of personnel administration because of political or religious opinions or affiliations or because of race, national origin, or any other non merit factors is prohibited. Discrimination on the basis of age, sex, or physical disability is prohibited except where specific age, sex, or physical requirements constitute a bona fide occupational qualification necessary to proper and efficient administration. REQUEST FOR ACCOMMODATION: Under the Americans with Disabilities Act, it is the responsibility of the applicant with a disability to request accommodation which he/she requires in order to participate in the application or examination process. The Personnel Department reserves the right to require documentation of the need for accommodation under the ADA. In order to request accommodation in the application or testing process, contact the Personnel Director at (334) 625-2675. I9: Prior to your employment, you will be required to provide to your employer documentation of your identity and employment eligibility in order to comply with the Immigration Reform and Control Act of 1986. UPDATE OF CONTACT INFORMATION: It is your responsibility to update your contact information (address, phone, email) so that we can contact you about jobs. Please visit the Update Contact Information page to log in and update to your contact information at any time.

At STERIS, we help our Customers create a healthier and safer world by providing innovative healthcare and life science product and service solutions around the globe. As a Secondary Machine Operator you will be responsible for safe and efficient operation of drilling and sawing machinery. Work is performed in accordance with the instructions provided by the department supervisor or manager (or other designated individual). The employee is expected to carry out the assignments, free of direct supervision, except for more complicated jobs. Shift: 7:00am - 3:00pm Monday - Friday What you will do as a Secondary Machine Operator * Setup and safely operate single spindle, multiple spindle, radial-armed drills, and cut-off saws. * Lay out and perform drilling, tapping, reaming and sawing functions per blueprint specifications. * Read and interpret STERIS blueprints, Geometric Dimensioning and Tolerancing (GD&T) including travelers, and other working documents. * Maintain equipment by ensuring the proper coolant concentration and oil levels are present, including adding coolants and oils when necessary. * Apply cutting and tapping fluids to materials and cutting tools to reduce heat and assist with chip removal. * Use required measuring instruments and gages to check and ensure parts meet dimensional requirements. * Complete all projects, assignments, and duties as directed and instructed by the area supervisor. * Take responsibility for the quality of all parts by inspecting and immediately reporting any problems, discrepancies or irregularities to the supervisor. * Follow 5S methodology to keep machines and work area clean, neat and orderly on a daily basis. * Remain safety conscious at all times, wearing all prescribed personal protective equipment and by observing all safety rules stated in the Employee Handbook. * Conform to all policies, procedures and rules of conduct as communicated through the Employee Handbook. * Ability to perform duties with minimal or no supervision if needed. * Exhibit teamwork by working cohesively with co-workers to continuously improve. The Experience, Skills and Abilities Required: * Must be able to read and interpret blueprints. * Must be able to use precision measuring instruments and gages. * Must be capable of lifting 40 pounds without assistance. Other: * Knowledge, understanding and application of Lean Manufacturing tools, such as, 5S, Kanban Inventory, Visual Management, Waste elimination, and Root Cause Problem Solving are preferred. * Ability to make decisions and stay quality focused. * Ability to communicate effectively with co-workers and members of the leadership team. * Assist with training other operators. * Ability to understand and follow work instructions, both written and oral. * Ability to adapt to conditions as dictated by business requirements. * Ability to work with others. * Willingness to work overtime, if required. What STERIS Offers We Value our employees and are committed to providing a comprehensive benefits package that supports your heath, well-being, and financial future. Here is just a brief overview of what we offer: * Market Competitive Pay * Extensive Paid Time Off and (9) added holidays * Long/short Term disability coverage * 401(k) with company match * Maternity & Paternal Leave * Additional add-ons benefits/discounts for programs such as Pet Insurance * Tuition Reimbursement and continues educations programs * Excellent opportunities for advancement and stable long-term career Pay range for this opportunity is $16.14 - $20.89. This position is eligible for bonus participation. Minimum pay rates offered will comply with county/city minimums, if higher than range listed. Pay rates are based on a number of factors, including but not limited to local labor market costs, years of relevant experience, education, professional certifications, foreign language fluency, etc. STERIS offers a comprehensive and competitive benefits portfolio. Click here for a complete list of benefits: STERIS Benefits Open until position is filled. STERIS is a leading global provider of products and services that support patient care with an emphasis on infection prevention. WE HELP OUR CUSTOMERS CREATE A HEALTHIER AND SAFER WORLD by providing innovative healthcare and life sciences products and services around the globe. For more information, visit *************** If you need assistance completing the application process, please call ****************. This contact information is for accommodation inquiries only and cannot be used to check application status. STERIS is an Equal Opportunity Employer. We are committed to equal employment opportunity to ensure that persons are recruited, hired, trained, transferred and promoted in all job groups regardless of race, color, religion, age, disability, national origin, citizenship status, military or veteran status, sex (including pregnancy, childbirth and related medical conditions), sexual orientation, gender identity, genetic information, and any other category protected by federal, state or local law. We are not only committed to this policy by our status as a federal government contractor, but also we are strongly bound by the principle of equal employment opportunity. The full affirmative action program, absent the data metrics required by § 60-741.44(k), shall be available to all employees and applicants for employment for inspection upon request. The program may be obtained at your location's HR Office during normal business hours.