Operator jobs in New Rochelle, NY - 285 jobs

To perform this job successfully, the Forklift Driver must be able to operate electrical power industrial truck or liquid propane gas (LPG) sit-down with lifting devices such as push-pull, elevating platform and/or slip sheet attachments to push, pull, lift, stack, tier, or move products, equipment, or materials. Shift: 8am-5pm Monday through Friday Pay: $25/hour Location: Brooklyn, NY. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. - Operate forklift by positioning forks on lifting platform to load pallets, skids, boxes, products and transport/stock to designated locations. - Ship, pull, and verify orders against packing slips; scan orders with inventory device to create TO numbers, log shipping orders, pick orders, and log and post goods shipped into inventory device, and move picked orders into shipping area. - Load trucks with pallets, boxes, and drums. - Receive, unload, and verify shipments; sort and separate goods; log and post goods received, tag pallets, and move goods into designated locations. - Perform inventory count and cycle counts. - Perform internal housekeeping, including change batteries, recharge batteries, and clean working area, etc. - Perform all duties in a safe, careful manner at all times. - Perform other duties and responsibilities as required or assigned. COMPETENCIES - Action Oriented - Customer Focus - Time Management SUPERVISORY RESPONSIBILTIES This job has no supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. A. EDUCATION, SKILLS and EXPERIENCE - This position requires a High School Diploma or equivalent education; and a minimum of 3 months forklift operating experience in warehouse environment. - Industry forklift certificate is a must. - Ability to apply common sense to understand and carry out instructions furnished in written and/or oral form. B. LANGUAGE SKILLS - Ability to speak, read, write, and comprehend simple English and Chinese. - Ability to read a limited number of two- and three-syllable words and to recognize similarities and differences between words and between series of numbers. C. MATHAMATICAL SKILLS - Ability to add, subtract, multiply, and divide with ability to operate in units of US currency, and measure in units of volume, and distance. D. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. - Regularly required to stand; use hands or fingers to handle or feel; reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and taste or smell. - Must frequently lift and/or move up to 50 pounds. - Specific vision ability is required, including close and distance vision, color vision, peripheral vision, depth perception, and ability to focus and adjust focus. E. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. - Regularly exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. - Occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and explosives. - The noise level in the work environment is usually loud. **Pay Details:** $25.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ********************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: + The California Fair Chance Act + Los Angeles City Fair Chance Ordinance + Los Angeles County Fair Chance Ordinance for Employers + San Francisco Fair Chance Ordinance **Massachusetts Candidates Only:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Industry - Transportation, Logistics, Supply Chain and Storage Employment Type - Full-time U.S. work authorization (Required) Must be authorized to work in the U.S. for any employer, without company sponsorship. (Your job as a Vessel Operator handling DRY BULK CARGO vessels) -To read charter party's and understand each voyage, or time-charter, terms, and conditions. -To make voyage plans after studying the details of vessels, ports, nature of the cargo, fuel oil prices etc. -To monitor vessels positions, speed and bunker consumption. -To make bunkering plans considering each vessel's best cargo intake, fuel oil prices etc. -To estimate vessels schedules, closely contacting with agents and inform same to the operating and chartering teams. -To contact all related parties (charterers, vessel's masters, agents, vessel's owners etc.) and negotiate to bring us the best results. -To make monthly voyage profit/loss statements for each vessel, with comparisons against your original plan for each item (intake/freight or hire, port and canal costs, bunkers, voyage duration etc.). -To perform other duties and responsibilities as required or requested by the Company. (We require candidates who) -have a strong sense of responsibility. -strive to do their best. -are kind and fair to everybody equally, without looking down or discriminating. -can multitask and take proper and timely action to overcome difficult situations. -can travel (occasionally at very short notice) to meet clients, port agents and vessels in port etc.

Rich's, also known as Rich Products Corporation, is a family-owned food company dedicated to inspiring possibilities. From cakes and icings to pizza, appetizers and specialty toppings, our products are used in homes, restaurants and bakeries around the world. Beyond great food, our customers also gain insights to help them stay competitive, no matter their size. Our portfolio includes creative solutions geared at helping food industry professionals compete in foodservice, retail, in-store bakery, deli, and prepared foods, among others. Working in 100 locations globally, with annual sales exceeding $4 billion, Rich's is a global leader with a focus on everything that family makes possible. Rich's-Infinite Possibilities. One Family. Purpose Statement Production Operator associates responsible for packaging raw bulk product into smaller packages in a safe, sanitary, cost-effective, and efficient manner. Protects the safety, hygiene and quality of the food, while meeting company quality standards. This is a first shift role, M-Th between 7a-530p EST Key Accountabilities and Outcomes * Housekeeping of machine area. * Verify bulk quantity and accuracy prior to start. * Make bags in accordance with customer requirements at fastest speed and best quality. * Bag label/Case label QC . * Daily feedback to Production Supervisor on Packers and any other issues. * Operators responsible for upkeep and maintenance of their own machines. MACHINES TURNED OFF WHEN NOT IN USE. * Bulk pallets are moved behind the production line back to inventory once complete. * Ensure only current production run's case labels are present. All other labels are removed from the area. ACTIVITES: Adhere to your assigned production line to avoid cross contamination of product. Completes logs Run Start Log and Machine Pre-op Checklist daily. Use OS to know the day's plan. Verify bulk product staged is enough before starting the machine. Make sure the machine area is clean all the time and tools are stored properly. Make sure bag labels are corrected and straight. Send picture of bag label to "Model Bag" text group. Make sure case labels are applies immediately and have correct information. Before end of shift make all cases are sealed and labeled. Make sure the machine and area is clean at the end of shift. If run is complete place white cone on bulk pallet so inventory associate can return to inventory. If run is not complete leave bulk pallet in place. Submit completed Run Start Log and Machine Pre-Op checklist to the QA Supervisor. Knowledge, Skills, and Experience PHYSICAL REQUIREMENTS: Will be required to perform tasks such as lifting up to 55 pounds, walking, standing, climbing, reaching, stooping, pulling, pushing, grasping, and balancing as part of production activities out on the floor. Will be required to see and hear well enough to understand Associates questions and respond to their concerns. Will be required to work in freezers, near noisy machinery, near confined spaces as part of daily production activities. Food Safety Responsibilities: Follow all GMP's, food safety, and quality policies. Report all food safety incidents such as GMP violations, ingredient and product contamination, metal detector, screen, or magnet deficiencies, glass breakage, and pest harborage. Monitor product quality and food safety throughout all stages of production, recording such results as required, and reporting deficiencies to Supervision. Record accurate and legible results on documentation Provide adequate housekeeping at all times. COMPENSATION In accordance with state law, the rate or range provided is Rich Products Corporation, its subsidiaries and affiliates ("Rich's"), reasonable estimate of the base compensation for this role. The actual amount may be higher or lower, based on non-discriminatory factors such as experience, knowledge, skills, abilities, shift differential, and location. Annual Range/Hourly Rate $18.00 - $18.00 Rich Products Corporation, its subsidiaries and affiliates ("Rich's"), are committed to a policy of Equal Employment Opportunity, standing up for fairness and maintaining a culture of belonging, to provide an exceptional experience for all. We will not discriminate against an applicant or employee on the basis of race, color, religion, sex, national origin, disability, military or veteran status, or any other Federal or State legally protected classes. The information collected by this application is solely to determine suitability for employment, verify identity, and maintain employment statistics on applicants. Applicants with disabilities may be entitled to reasonable accommodation under the Americans with Disabilities Act and certain state or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on Rich's. Please contact Rich's Associate Experience Network at *************** if you need assistance completing this application or to otherwise participate in the application process. BRINGING YOUR BEST SELF TO WORK. As a family-owned company, caring for our associates-their whole selves-is a top priority. That's why we provide benefits and tools to help our people balance the integration of work and life: * Competitive compensation * Health & financial benefits * Paid time off * Parental leave * Family planning support * Flexible work policy * Associate resource groups * Volunteering & community impact opportunities * Holiday gatherings * In-house taste tests (we are a food company after all)! It's all part of how we support our family of associates. Because in the company of family, all things are possible. MEET RICH'S. Rich's, also known as Rich Products Corporation, is a family-owned food company dedicated to inspiring possibilities. From cakes and icings to pizza, appetizers and specialty toppings, our products are used in homes, restaurants and bakeries around the world. Beyond great food, our customers also gain insights to help them stay competitive, no matter their size. Our portfolio includes creative solutions geared at helping food industry professionals compete in foodservice, retail, in-store bakery, deli, and prepared foods, among others. Working in 100 locations globally, with annual sales exceeding $3.8 billion, Rich's is a global leader with a focus on everything that family makes possible. Rich's-Infinite Possibilities. One Family. Nearest Major Market: New York City Nearest Secondary Market: Newark

SHIFT: Friday - Tuesday 11:00PM - 7:00AM Monitor and operate combined heat and power plant and chilled water systems and connected equipment controls. Ensure plant operations are performed safely and efficiently; monitor and respond to changes in operating conditions to maintain continuous plant performance; as directed perform operations work order duties and routines. Per prescribed frequencies and in accordance with established round protocols and recording direction, perform physical watch stander rounds of the cogeneration facility. Record and report any abnormal conditions to the Engineer. Assist Engineer in troubleshooting any plant issues. As required receive plant fuel and material deliveries. Maintain qualifications and perform stack emissions observations. At the engineer's direction manipulate manual and automatic valves and controllers in the plant. Respond to field emergencies as needed. Perform lock out tag out as directed. Ability to assist the Engineer in operating the plant either in the field or via the plant computerized control systems. Qualifications Required Education: High School diploma.City of New York Certificate of Qualification for Refrigeration System Operator. City of New York Engineers License for High Pressure Boilers, Engines and Pumps. Preferred Education: Operating Engineer Apprentice Program.Trade School or other Post-Elementary EducationEngineering Degree. Required Experience: Five years relevant experience Preferred Experience: Operation and maintenance of Gas Turbines/Combustion Turbines, Heat Recovery Steam Generators Required Skills, Knowledge and Abilities: Knowledge, Skills and Abilities:- Knowledge of cogeneration and chilled water systems, equipment and proper operating conditions.- Knowledge of combined heat and power and chilled water systems and chilled systems, equipment and proper operating conditions.- Knowledge of maintenance routines and standards.- Soldering, minor welding, wire pulling, brazing, pipe threading and conduit installation skills.- Safe operation of hand tools, power tools, rigging equipment.- Good written and verbal communications skills, good interpersonal skills. - Basic knowledge/familiarity with computer applications such as Email, MS word and MS excel.- Maintain shift records for use by Central Plant staff.- Ability to learn plant instrumentation and control systems.- Ability to perform required task under minimum supervision- Ability to read and interpret diagrams, P7ID's, logic diagrams and OEM schematics- Knowledge of DDC instrumentation and Control systems- Knowledge in the operation and maintenance of high voltage switchgear and control equipment- Perform effective shift turn-over to oncoming shift, i.e., complete communication of plant equipment status and issues requiring attention by the oncoming shift; unfinished operations and maintenance tasks.- Positive attitude, willingness to collaborate and team with others to accomplish work efficiently and to high quality standards.Essential Requirements of the Position: - Proficient in English (e.g. reading directions and instructions written in English).- Ability to climb ladders, perform work safely on 'cherry picker work in hot or cold conditions (with proper personal protective equipment), work in confined space, etc.- Adequate ability to discern colors for monitoring alarm conditions on computer screens.-Ability to wear and work while wearing a full-face respirator.-Ability to lift 50 pounds.-Ability to work off of ladders and scaffolding Preferred Skills, Knowledge and Abilities: -Knowledge of University and department policies, processes, and quality standards. Additional Information In compliance with NYC's Pay Transparency Act, the hourly rate for this position is USD $62.185. This rate is based on bargaining unit contracts. This pay range represents base pay only and excludes any additional items such as incentives, bonuses, clinical compensation, or other items. NYU aims to be among the greenest urban campuses in the country and carbon neutral by 2040. Learn more at nyu.edu/nyugreen. NYU is an Equal Opportunity Employer and is committed to a policy of equal treatment and opportunity in every aspect of its recruitment and hiring process without regard to age, alienage, caregiver status, childbirth, citizenship status, color, creed, disability, domestic violence victim status, ethnicity, familial status, gender and/or gender identity or expression, marital status, military status, national origin, parental status, partnership status, predisposing genetic characteristics, pregnancy, race, religion, reproductive health decision making, sex, sexual orientation, unemployment status, veteran status, or any other legally protected basis. All interested persons are encouraged to apply at all levels.

KOMAN Government Solutions, LLC (KGS), a wholly-owned 8(a) subsidiary of the Natives of Kodiak (NOK), provides high-quality remediation, consulting, engineering, waste management, munition and construction services. KGS is characterized by our financial stability, positive and profitable growth and an excellent safety record. Our client base includes the U.S. Air Force, U.S. Army, U.S. Army Corps of Engineers, U.S. Marine, Naval Facilities Engineering Command, U.S. Coast Guard, U.S. Department of Agriculture, National Guard Bureau, Federal Aviation Administration, as well as various state, municipal and commercial entities. We have an immediate need for a part-time (20-hours per week) Treatment Plant Operator located in the vicinity of the Naval Weapons Industrial Reserve Plant (NWIRP), Bethpage, New York. The Treatment Plant Operator is responsible for the operation and maintenance (O&M), monitoring, troubleshooting, and repairing various treatment plants. These may include groundwater treatment plants, wastewater pretreatment/treatment plants, drinking water treatment plants, soil vapor extraction/air sparge (SVE/AS) systems, or other treatment plants. The Treatment Plant Operator is responsible for general plant and property maintenance and implementation of onsite safety and quality control. Benefits: Our full-time employees are eligible for an outstanding benefits package that consists of medical, dental, vision, life / disability insurance and 401k with match. The rate of pay for this position is $35 to $38 per hour along with health and welfare benefits. Duties and Responsibilities: Perform Treatment Plant O&M in accordance with prescribed requirements including discharge permit requirements. Perform instrument calibration/measurement/data recording for operating parameters. Collect process samples to be shipped for laboratory analysis. Perform routine maintenance items such as filter changeouts, carbon backwashing, carbon or other media changeouts, pump and motor servicing, and/or any other routine maintenance required. Respond to system call-outs as required within 4 hours to keep the treatment plants running continuously. Perform/oversee routine site maintenance including limited mowing and snow removal. Treat water generating from construction dewatering events. Perform troubleshooting activities. Assist with repairs and treatment plant upgrades or modifications. Prepare daily reports to be emailed to the Project Manager. Prepare monthly reports including discharge monitoring reports Oversee onsite activities to monitor compliance with building and safety regulations. Select tools, materials and equipment and track inventory. Assist in generating Request for Information and Change Order documents, including labor and materials costs for necessary maintenance. Prepare internal reports pertaining to job status. Oversee subcontractors Familiarity/experience with operation/control of: Remote recovery wells Air Stripping Bag Filtration GAC filtration Advance oxidation process (AOP) Chemical handling. Qualifications Minimum of 5 years of related experience and/or training. Licensed Wastewater Treatment Plant Operator. OSHA 40 hr HAZWOPER Training preferred. Basic mechanical skills to operate, maintain, troubleshoot, and direct repairs on groundwater extraction and treatment system components. Basic skills with Microsoft Office suite and SCADA systems. Other Requirements: Ability to work in the field on hazardous waste sites. Must be able to occasionally lift and /or move up to 50 pounds. Must be a US citizen and can obtain security clearance/badges for access to secure military installations. Must possess valid US driver s license and good driving record. Position requires satisfactory completion of pre-employment criminal record and driving background checks. Pre-employment drug testing and physical are required, as well as compliance with Corporate Drug-Free Workplace Program. As a Federal Contract Employer, KOMAN Families of Companies follows Federal Laws as it pertains to drug testing. All candidates who receive a written offer of employment will be required to undergo drug testing for commonly abused controlled substances in accordance with Federal Law. It is important to note although a State may have legalized a controlled substance, if the controlled substance is illegal per Federal Law, it is then considered to be illegal. KOMAN Families of Companies is a Drug-Free Workplace. Successful completion of a background and DMV record check also must be completed prior to hire. Preference will be given to Natives of Kodiak, Inc. Shareholders and Descendants of Shareholders in accordance with Title 43 U.S. Code 1626(g) and Title 42 U.S. Code 2000e - 2(i) KGS is an Equal Opportunity Employer: Minorities/Women/Veterans/Disabled and other protected categories.

KOMAN Government Solutions, LLC (KGS), a wholly-owned 8(a) subsidiary of the Natives of Kodiak (NOK), provides high-quality remediation, consulting, engineering, waste management, munition and construction services. KGS is characterized by our financial stability, positive and profitable growth and an excellent safety record. Our client base includes the U.S. Air Force, U.S. Army, U.S. Army Corps of Engineers, U.S. Marine, Naval Facilities Engineering Command, U.S. Coast Guard, U.S. Department of Agriculture, National Guard Bureau, Federal Aviation Administration, as well as various state, municipal and commercial entities. We have an immediate need for a part-time (20-hours per week) Treatment Plant Operator located in the vicinity of the Naval Weapons Industrial Reserve Plant (NWIRP), Bethpage, New York. The Treatment Plant Operator is responsible for the operation and maintenance (O&M), monitoring, troubleshooting, and repairing various treatment plants. These may include groundwater treatment plants, wastewater pretreatment/treatment plants, drinking water treatment plants, soil vapor extraction/air sparge (SVE/AS) systems, or other treatment plants. The Treatment Plant Operator is responsible for general plant and property maintenance and implementation of onsite safety and quality control. Benefits: Our full-time employees are eligible for an outstanding benefits package that consists of medical, dental, vision, life / disability insurance and 401k with match. The rate of pay for this position is $35 to $38 per hour along with health and welfare benefits. Duties and Responsibilities: Perform Treatment Plant O&M in accordance with prescribed requirements including discharge permit requirements. Perform instrument calibration/measurement/data recording for operating parameters. Collect process samples to be shipped for laboratory analysis. Perform routine maintenance items such as filter changeouts, carbon backwashing, carbon or other media changeouts, pump and motor servicing, and/or any other routine maintenance required. Respond to system call-outs as required within 4 hours to keep the treatment plants running continuously. Perform/oversee routine site maintenance including limited mowing and snow removal. Treat water generating from construction dewatering events. Perform troubleshooting activities. Assist with repairs and treatment plant upgrades or modifications. Prepare daily reports to be emailed to the Project Manager. Prepare monthly reports including discharge monitoring reports Oversee onsite activities to monitor compliance with building and safety regulations. Select tools, materials and equipment and track inventory. Assist in generating Request for Information and Change Order documents, including labor and materials costs for necessary maintenance. Prepare internal reports pertaining to job status. Oversee subcontractors Familiarity/experience with operation/control of: Remote recovery wells Air Stripping Bag Filtration GAC filtration Advance oxidation process (AOP) Chemical handling. Qualifications Minimum of 5 years of related experience and/or training. Licensed Wastewater Treatment Plant Operator. OSHA 40 hr HAZWOPER Training preferred. Basic mechanical skills to operate, maintain, troubleshoot, and direct repairs on groundwater extraction and treatment system components. Basic skills with Microsoft Office suite and SCADA systems. Other Requirements: Ability to work in the field on hazardous waste sites. Must be able to occasionally lift and /or move up to 50 pounds. Must be a US citizen and can obtain security clearance/badges for access to secure military installations. Must possess valid US driver s license and good driving record. Position requires satisfactory completion of pre-employment criminal record and driving background checks. Pre-employment drug testing and physical are required, as well as compliance with Corporate Drug-Free Workplace Program. As a Federal Contract Employer, KOMAN Families of Companies follows Federal Laws as it pertains to drug testing. All candidates who receive a written offer of employment will be required to undergo drug testing for commonly abused controlled substances in accordance with Federal Law. It is important to note although a State may have legalized a controlled substance, if the controlled substance is illegal per Federal Law, it is then considered to be illegal. KOMAN Families of Companies is a Drug-Free Workplace. Successful completion of a background and DMV record check also must be completed prior to hire. Preference will be given to Natives of Kodiak, Inc. Shareholders and Descendants of Shareholders in accordance with Title 43 U.S. Code 1626(g) and Title 42 U.S. Code 2000e - 2(i) KGS is an Equal Opportunity Employer: Minorities/Women/Veterans/Disabled and other protected categories.

KOMAN Government Solutions, LLC (KGS), a wholly-owned 8(a) subsidiary of the Natives of Kodiak (NOK), provides high-quality remediation, consulting, engineering, waste management, munition and construction services. KGS is characterized by our financial stability, positive and profitable growth and an excellent safety record. Our client base includes the U.S. Air Force, U.S. Army, U.S. Army Corps of Engineers, U.S. Marine, Naval Facilities Engineering Command, U.S. Coast Guard, U.S. Department of Agriculture, National Guard Bureau, Federal Aviation Administration, as well as various state, municipal and commercial entities. We have an immediate need for a part-time (20-hours per week) **Treatment Plant Operator** located in the vicinity of the Naval Weapons Industrial Reserve Plant (NWIRP), Bethpage, New York. The Treatment Plant Operator is responsible for the operation and maintenance (O&M), monitoring, troubleshooting, and repairing various treatment plants. These may include groundwater treatment plants, wastewater pretreatment/treatment plants, drinking water treatment plants, soil vapor extraction/air sparge (SVE/AS) systems, or other treatment plants. The Treatment Plant Operator is responsible for general plant and property maintenance and implementation of onsite safety and quality control. **Benefits:** + Our full-time employees are eligible for an outstanding benefits package that consists of medical, dental, vision, life / disability insurance and 401k with match. + The rate of pay for this position is $35 to $38 per hour along with health and welfare benefits. **Duties and Responsibilities:** + Perform Treatment Plant O&M in accordance with prescribed requirements including discharge permit requirements. + Perform instrument calibration/measurement/data recording for operating parameters. + Collect process samples to be shipped for laboratory analysis. + Perform routine maintenance items such as filter changeouts, carbon backwashing, carbon or other media changeouts, pump and motor servicing, and/or any other routine maintenance required. + Respond to system call-outs as required within 4 hours to keep the treatment plants running continuously. + Perform/oversee routine site maintenance including limited mowing and snow removal. + Treat water generating from construction dewatering events. + Perform troubleshooting activities. Assist with repairs and treatment plant upgrades or modifications. + Prepare daily reports to be emailed to the Project Manager. + Prepare monthly reports including discharge monitoring reports + Oversee onsite activities to monitor compliance with building and safety regulations. + Select tools, materials and equipment and track inventory. + Assist in generating Request for Information and Change Order documents, including labor and materials costs for necessary maintenance. + Prepare internal reports pertaining to job status. + Oversee subcontractors + Familiarity/experience with operation/control of: + Remote recovery wells + Air Stripping + Bag Filtration + GAC filtration + Advance oxidation process (AOP) + Chemical handling. **Qualifications** + Minimum of 5 years of related experience and/or training. + Licensed Wastewater Treatment Plant Operator. + OSHA 40 hr HAZWOPER Training preferred. + Basic mechanical skills to operate, maintain, troubleshoot, and direct repairs on groundwater extraction and treatment system components. + Basic skills with Microsoft Office suite and SCADA systems. **Other Requirements:** + Ability to work in the field on hazardous waste sites. + Must be able to occasionally lift and /or move up to 50 pounds. + Must be a US citizen and can obtain security clearance/badges for access to secure military installations. + Must possess valid US driver's license and good driving record. + Position requires satisfactory completion of pre-employment criminal record and driving background checks. Pre-employment drug testing and physical are required, as well as compliance with Corporate Drug-Free Workplace Program. **_As a Federal Contract Employer, KOMAN Families of Companies follows Federal Laws as it pertains to drug testing. All candidates who receive a written offer of employment will be required to undergo drug testing for commonly abused controlled substances in accordance with Federal Law. It is important to note although a State may have legalized a controlled substance, if the controlled substance is illegal per Federal Law, it is then considered to be illegal. KOMAN Families of Companies is a Drug-Free Workplace. Successful completion of a background and DMV record check also must be completed prior to hire._** _Preference will be given to Natives of Kodiak, Inc. Shareholders and Descendants of Shareholders in accordance with Title 43 U.S. Code 1626(g) and Title 42 U.S. Code 2000e - 2(i)_ KGS is an Equal Opportunity Employer: Minorities/Women/Veterans/Disabled and other protected categories.

Treatment Plant Operator - Bethpage, NY Location: Bethpage, NY Company Name: KOMAN Government Solutions, LLC START YOUR APPLICATION KOMAN Government Solutions, LLC (KGS), a wholly-owned 8(a) subsidiary of the Natives of Kodiak (NOK), provides high-quality remediation, consulting, engineering, waste management, munition and construction services. KGS is characterized by our financial stability, positive and profitable growth and an excellent safety record. Our client base includes the U.S. Air Force, U.S. Army, U.S. Army Corps of Engineers, U.S. Marine, Naval Facilities Engineering Command, U.S. Coast Guard, U.S. Department of Agriculture, National Guard Bureau, Federal Aviation Administration, as well as various state, municipal and commercial entities. We have an immediate need for a part-time (20-hours per week) Treatment Plant Operator located in the vicinity of the Naval Weapons Industrial Reserve Plant (NWIRP), Bethpage, New York. The Treatment Plant Operator is responsible for the operation and maintenance (O&M), monitoring, troubleshooting, and repairing various treatment plants. These may include groundwater treatment plants, wastewater pretreatment/treatment plants, drinking water treatment plants, soil vapor extraction/air sparge (SVE/AS) systems, or other treatment plants. The Treatment Plant Operator is responsible for general plant and property maintenance and implementation of onsite safety and quality control. Benefits: * Our full-time employees are eligible for an outstanding benefits package that consists of medical, dental, vision, life / disability insurance and 401k with match. * The rate of pay for this position is $35 to $38 per hour along with health and welfare benefits. Duties and Responsibilities: * Perform Treatment Plant O&M in accordance with prescribed requirements including discharge permit requirements. * Perform instrument calibration/measurement/data recording for operating parameters. * Collect process samples to be shipped for laboratory analysis. * Perform routine maintenance items such as filter changeouts, carbon backwashing, carbon or other media changeouts, pump and motor servicing, and/or any other routine maintenance required. * Respond to system call-outs as required within 4 hours to keep the treatment plants running continuously. * Perform/oversee routine site maintenance including limited mowing and snow removal. * Treat water generating from construction dewatering events. * Perform troubleshooting activities. Assist with repairs and treatment plant upgrades or modifications. * Prepare daily reports to be emailed to the Project Manager. * Prepare monthly reports including discharge monitoring reports * Oversee onsite activities to monitor compliance with building and safety regulations. * Select tools, materials and equipment and track inventory. * Assist in generating Request for Information and Change Order documents, including labor and materials costs for necessary maintenance. * Prepare internal reports pertaining to job status. * Oversee subcontractors * Familiarity/experience with operation/control of: * Remote recovery wells * Air Stripping * Bag Filtration * GAC filtration * Advance oxidation process (AOP) * Chemical handling. Qualifications * Minimum of 5 years of related experience and/or training. * Licensed Wastewater Treatment Plant Operator. * OSHA 40 hr HAZWOPER Training preferred. * Basic mechanical skills to operate, maintain, troubleshoot, and direct repairs on groundwater extraction and treatment system components. * Basic skills with Microsoft Office suite and SCADA systems. Other Requirements: * Ability to work in the field on hazardous waste sites. * Must be able to occasionally lift and /or move up to 50 pounds. * Must be a US citizen and can obtain security clearance/badges for access to secure military installations. * Must possess valid US drivers license and good driving record. * Position requires satisfactory completion of pre-employment criminal record and driving background checks. Pre-employment drug testing and physical are required, as well as compliance with Corporate Drug-Free Workplace Program. As a Federal Contract Employer, KOMAN Families of Companies follows Federal Laws as it pertains to drug testing. All candidates who receive a written offer of employment will be required to undergo drug testing for commonly abused controlled substances in accordance with Federal Law. It is important to note although a State may have legalized a controlled substance, if the controlled substance is illegal per Federal Law, it is then considered to be illegal. KOMAN Families of Companies is a Drug-Free Workplace. Successful completion of a background and DMV record check also must be completed prior to hire. Preference will be given to Natives of Kodiak, Inc. Shareholders and Descendants of Shareholders in accordance with Title 43 U.S. Code 1626(g) and Title 42 U.S. Code 2000e - 2(i) KGS is an Equal Opportunity Employer: Minorities/Women/Veterans/Disabled and other protected categories. START YOUR APPLICATION

We're hiring a Print Operator to join our production team! You'll work with industrial printing equipment, perform quality checks, and help keep production running smoothly. Responsibilities: Operate printing machinery and tools per job requirements Perform quality inspections before and after printing Maintain a clean and organized work area Meet production goals and ensure product quality Re-package, label, and prepare shipments as needed Occasionally work overtime to meet customer needs

About Circular Services: Circular Services is the largest privately held recycling and organics service provider in the U.S. It operates over 25 facilities serving major long-term municipal and commercial contracts. The mission of Circular Services is to keep valuable materials in circulation and minimize the cost and environmental impact of landfills. The company services municipal contracts with some of the largest and fastest growing cities in the U.S. including New York City, Austin, San Antonio, and Phoenix. We are currently looking for an Equipment Operator to join our facility in Jersey City, NJ About the Role: The E.O. operates equipment to include frontend loader with bucket, 12k forklift or smaller with rotator, bobcat and skid steer. Operators are to follow all Balcones Resources safety regulations and golden rules. Operator will provide pre-shift and end of shift inspections and is responsible for greasing and daily upkeep of equipment and work areas. Responsibilities: Performs routine maintenance on loader such as lubricating, fueling and cleaning. Completes inspection report prior to using equipment. Safely operate machinery under the direction of the shift supervisor or production manager. Load trucks, pile scrap material, load/unload barges and rail cars End of shift clean up and equipment inspection. Regularly clean equipment to preserve its quality and functionality. Commit to the overall safety of the work environment. Sweeps and shovels residual waste from process. Other duties may be assigned. Qualifications: High School diploma or general education degree (GED) Valid Driver's license Minimum of 12 months related experience and/or training; or equivalent combination of education and experience Working Conditions: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand and reach with hands and arms. The employee is frequently required to walk; use hands to finger, handle, or feel; climb or balance and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit and talk or hear. The employee must regularly lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts, and outside weather conditions. The employee is frequently exposed to high, precarious places and vibration. The noise level in the work environment is usually loud. EEOC: Circular Services is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: Circular Services is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at Circular Services are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Circular Services will not tolerate discrimination or harassment based on any of these characteristics. Job Type: Full-time Pay: $23.33 per hour Benefits: Dental insurance Health insurance Vision insurance Paid time off Sick Time off 401K Annuity Shift: 8-hour shift plus overtime Ability to commute/relocate: Jersey City, NJ 07305: Reliably commute or planning to relocate before starting work (Required) Work Location: In person.

JOB DESCRIPTION . Placement fee 15% of Annualized Salary. The primary objective of this position is support the Shipping and Receiving with the movement of materials and finished goods in order to ensure proper material flow to run the line efficiently. Principal Duties and Responsibilities: Operate lift truck in a safe, productive manner in accordance with all safety procedures Fill out daily checklist for forklift Fill LP tanks as needed following all safety procedure. Ensure proper color stenciling and UPC label wrappers are correct on product before being loaded on trucks. Record pallets on tally sheet as needed. Record pallet weight every 30 minutes on tally sheet if pallet weights is below specification, immediate notification to supervisor is necessary. Communicate with the production FLL and LTO is pallet count isnt correct Maintain housekeeping of forklift, shipping and receiving areas. Load and unload finished products and any related raw materials following proper procedures Knowledge of warehouse storage areas and location of all products including samples and accessory items Assist other plant personnel as needed Monitor inventories and turn over in timely manner Notify your supervisor immediately of any accident, near miss accident or on-the-job injury when it occurs no matter how insignificant it may seem Operate equipment only when you are trained in its use or are working with or under the direction of a qualified employee, and you are authorized to do so by your supervisor Wear proper personal protective equipment (PPE) at all times Perform other duties as assigned by leader SKILLS AND ABILITIES The employee should hold the following abilities: Good oral and written communication skills Ability to read, write and understand English Basic mathematics skills Some knowledge of all raw materials Knowledge of finished product Ability to work with truck drivers in a positive and courteous manner COMPUTER AND SOFTWARE COMPENTENCIES The employee must be able to: Log into and navigate MyOC to access PeopleSoft for paycheck/benefits enrollment information Log into and navigate University (OCU) and accomplish required online training routinely EDUCATION AND/OR EXPERIENCE The employee should have the following: High School Diploma or GED equivalency Completed and passed lift truck training programs and have a valid fork lift operator license ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT The employee should possess the ability to: Ability to routinely lift up to 40 lbs without assistance Ability to routinely lift up to 80 lbs with assistance Work for up to 8 hours in extreme hot/cold manufacturing environment Operate/sit/drive for up to 8 hours continuously. Routinely ascend and descend stairs and forklift to enter work areas Safeguard self with Personal Protective Equipment (PPE) steel toed shoes, ear plugs, eye protection (glasses, goggles, and/or facemask) as necessary for task Push/drive floor sweeping and cleaning equipment or tools as necessary for housekeeping duties. Ability to rotate or work overtime as necessary

Job Description All Star Paving & Sealing LLC, Connecticut's premier asphalt paving and maintenance contractor, is excited to announce a career opportunity for a Heavy Equipment Operator. Become an integral part of a dynamic and reputable family-owned business with over 25 years of excellence in the industry. As a leading full-service asphalt contractor, we take pride in providing top-notch services and building strong relationships within our communities. Our team handles everything from residential driveways and parking lots to major roadway projects, along with concrete work, milling, grading, excavation, masonry, drainage and asphalt maintenance. Pay: $25-$35/hr Benefits/Perks: Retirement and Company Match Program after 1 year of service. Supportive, family-oriented culture and opportunities for professional growth. Hours: Seasonal position: April - December Mon - Fri 6am - 4pm, some Saturdays Duties: Operate machinery according to established procedures and safety guidelines. Set up machines before starting production, including calibration and configuration. Monitor machine performance and adjust settings to maintain product quality. Inspect finished products for defects and ensure they meet specifications. Troubleshoot issues and perform basic repairs or adjustments as needed. Maintain accurate production records, including output counts and downtime logs. Conduct routine cleaning and maintenance to keep equipment in optimal condition. Follow safety protocols, including lockout/tagout procedures and use of PPE. Collaborate with supervisors and technicians to optimize productivity. Report equipment malfunctions or safety hazards promptly. Qualifications: High school diploma or equivalent. Experience operating manufacturing or industrial machinery preferred. Basic mechanical aptitude and problem-solving skills. Ability to read blueprints, schematics, or technical documents (preferred). Good attention to detail and quality control awareness. Ability to stand for long periods and lift moderate weights as required. Strong understanding of safety practices in industrial environments. Key Skills: Mechanical and technical skills Attention to detail Time management Communication Troubleshooting Teamwork Basic math and measurement ability #hc208587

Resillion US, LLC. is a leading content QC company that works with major streaming services and entertainment platforms to bring diverse stories to a global audience. We value precision, inclusivity, and creativity in delivering the best viewing experience to subscribers all around the world. One of our specialties focused on preserving and revitalizing iconic content for audiences around the world. We are passionate about blending artistry with state-of-the-art technology to restore classic films, television shows, and media to their original brilliance while enhancing them for modern viewing standards. Our high-profile projects celebrate the history of entertainment and push the boundaries of digital restoration. Job Description Set up playback devices, QC bays, and monitors/ scopes according to established specifications. Verify correct format, aspect ratio, audio configuration, and file metadata based on client specifications and previous title history. Take accurate line count and video/ audio measurements using industry standard waveform scopes and audio meters. Perform thorough mastering level quality control inspection noting any and all audio/ video impairments and anomalies. Ensure reports are consistent and accurate across all previous versions of a given title, which may require tracking new anomalies back to original sources and other aspect ratios/ formats. Troubleshoot any technical issues with playback of assigned jobs. Provide additional information regarding a particular job or specific anomaly as needed. May be required to perform other duties as needed (including, but not limited to: file transmission and data management, training other operators, client review sessions, etc.) The ideal candidate would possess: Solid understanding of a wide variety of film, video and audio impairments and their underlying causes. Extensive experience with all SD and HD formats and timecode 2K, UHD and 4K and HDR-10 and Dolby Vision experience a huge plus. Extensive experience with any and all file-based workflows (including, but not limited to Tiff, DPX, J2K, ProRes, IMF packages). Solid DaVinci Resolve proficiency, including building files and understanding of timeline output settings/ bin clip properties Experience with ColorFront Transkoder for QC or Production a plus Abilitiy to read and understand MaxFaLL and MaxCLL HDR reports. Superior attention to detail and accuracy. Ability to think in a logical and organized manner and work efficiently under tight deadlines with minimal supervision. Strong computer, scientific, and organizational skills Excellent communication (oral and written) and attention to detail Ability to work independently and as part of a team, self-motivation, adaptability, and a positive attitude Ability to learn new techniques, perform multiple tasks simultaneously, keep accurate records, follow instructions, and comply with company policies Salary Range $25.00-27.00 Per Hour Qualifications 3 to 5 years experience as a Mastering Quality Control operator, working in a professional Post Production facility or studio. Authorization to work in the United States indefinitely without restriction or sponsorship Additional Information Equal Employment Opportunity - Resillion US, LLC is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, religious creed, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and related medical conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law (such as cancer), genetic information, or any other characteristic protected by applicable federal, state or local laws and ordinances. Resillion US, LLC management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, access to facilities and programs and general treatment during employment. All your information will be kept confidential according to EEO guidelines. Disclaimers Headhunters and recruitment agencies may not submit resumes/CVs through this website or directly to managers. Resillion does not accept unsolicited headhunter and agency resumes and will not pay fees to any third-party agency. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. All offers of employment at Resillion US, LLC. are contingent upon clear results of a thorough background check.

Resillion US, LLC. is a leading content QC company that works with major streaming services and entertainment platforms to bring diverse stories to a global audience. We value precision, inclusivity, and creativity in delivering the best viewing experience to subscribers all around the world. One of our specialties focused on preserving and revitalizing iconic content for audiences around the world. We are passionate about blending artistry with state-of-the-art technology to restore classic films, television shows, and media to their original brilliance while enhancing them for modern viewing standards. Our high-profile projects celebrate the history of entertainment and push the boundaries of digital restoration. Job Description Set up playback devices, QC bays, and monitors/ scopes according to established specifications. Verify correct format, aspect ratio, audio configuration, and file metadata based on client specifications and previous title history. Take accurate line count and video/ audio measurements using industry standard waveform scopes and audio meters. Perform thorough mastering level quality control inspection noting any and all audio/ video impairments and anomalies. Ensure reports are consistent and accurate across all previous versions of a given title, which may require tracking new anomalies back to original sources and other aspect ratios/ formats. Troubleshoot any technical issues with playback of assigned jobs. Provide additional information regarding a particular job or specific anomaly as needed. May be required to perform other duties as needed (including, but not limited to: file transmission and data management, training other operators, client review sessions, etc.) The ideal candidate would possess : Solid understanding of a wide variety of film, video and audio impairments and their underlying causes. Extensive experience with all SD and HD formats and timecode 2K, UHD and 4K and HDR-10 and Dolby Vision experience a huge plus. Extensive experience with any and all file-based workflows (including, but not limited to Tiff, DPX, J2K, ProRes, IMF packages). Solid DaVinci Resolve proficiency, including building files and understanding of timeline output settings/ bin clip properties Experience with ColorFront Transkoder for QC or Production a plus Abilitiy to read and understand MaxFaLL and MaxCLL HDR reports. Superior attention to detail and accuracy. Ability to think in a logical and organized manner and work efficiently under tight deadlines with minimal supervision. Strong computer, scientific, and organizational skills Excellent communication (oral and written) and attention to detail Ability to work independently and as part of a team, self-motivation, adaptability, and a positive attitude Ability to learn new techniques, perform multiple tasks simultaneously, keep accurate records, follow instructions, and comply with company policies Salary Range $25.00-27.00 Per Hour Qualifications 3 to 5 years experience as a Mastering Quality Control operator, working in a professional Post Production facility or studio. Authorization to work in the United States indefinitely without restriction or sponsorship Additional Information Equal Employment Opportunity - Resillion US, LLC is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, religious creed, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and related medical conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law (such as cancer), genetic information, or any other characteristic protected by applicable federal, state or local laws and ordinances. Resillion US, LLC management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities, access to facilities and programs and general treatment during employment. All your information will be kept confidential according to EEO guidelines. Disclaimers Headhunters and recruitment agencies may not submit resumes/CVs through this website or directly to managers. Resillion does not accept unsolicited headhunter and agency resumes and will not pay fees to any third-party agency. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. All offers of employment at Resillion US, LLC. are contingent upon clear results of a thorough background check.

Line of Business: Aggregates About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing * Operate yard loader to move and load sand and gravel materials safely and efficiently * Inspect equipment daily and perform basic maintenance to ensure operational readiness * Maintain stockpiles and loadout areas to support plant production and customer needs * Communicate with plant personnel to coordinate material movement and loading schedules * Follow all safety procedures and environmental regulations while operating equipment What Are We Looking For * Ability to operate heavy equipment with precision and awareness of surroundings * Strong commitment to safety and attention to detail * Effective communication and teamwork skills * Willingness to work in outdoor, physically demanding conditions * Adaptability to changing priorities and shift schedules Conditions of Employment * Successful candidate must submit to post-offer pre-employment physical examination, drug screen, and background check * Compliance with all company safety policies and procedures is required Work Environment * Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level Physical Demands of the Job * Ability to stand, walk, and climb for extended periods * Must be able to lift up to 50 pounds occasionally * Frequent bending, stooping, and working in confined spaces * Manual dexterity to operate tools and controls * Use of personal protective equipment (PPE) required What We Offer * Starting Pay $22.60 per hour DOE * 401(k) retirement savings plan with an automatic company contribution as well as matching contributions * Highly competitive benefits programs, including: * Medical, Dental, and Vision along with Prescription Drug Benefits * Health Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA) * AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance * Paid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled #HMSWJobs

JobID: 210641279 JobSchedule: Full time JobShift: Base Pay/Salary: Jersey City,NJ $152,000.00-$260,000.00; New York,NY $152,000.00-$260,000.00 Contribute to leading-edge security and resilience efforts, advancing protective strategies and propelling continuous improvement. As an Assessments & Exercises Vice President in the Cybersecurity and Technology Controls line of business, you will contribute significantly to enhancing the firm's cybersecurity or resiliency posture by using industry-standard assessment methodologies and techniques to proactively identify risks and vulnerabilities in people, processes, and technology. Design and deploy risk-driven tests and simulations (or manage a highly skilled team that does) and inform analysis to clearly outline root-causes. In this role, you will evaluate preventative controls, incident response processes, and detection capabilities, and advise cross-functional teams on security strategy and risk management. JPMC's Assurance Operations organization is looking to expand its Cybersecurity Red Team with an experienced Business Process Red Team Operator specialized in social engineering and assessments of critical business processes such as payment operations, fraud, and supplier management. The primary focus of this role will be to perform and manage hands-on offensive security activities leveraging social engineering skillsets as part of Red Team engagements against critical JPMC assets. The successful candidate will have a proven track record in cybersecurity assessments, to include social engineering operations like phishing and vishing, and will be able to demonstrate a general knowledge of computer networking fundamentals, modern threats and vulnerabilities, attack methodologies, and penetration testing tools. The Cybersecurity Red Team consists of highly skilled and qualified members who conduct advanced adversary emulation operations to replicate cybersecurity threats targeting the firm. This position is anticipated to require the use of one or more High Risk Role (HRR) systems, which mandates successful completion of enhanced screening, including criminal and credit background checks, before starting employment and annually thereafter. Job responsibilities * Perform and manage hands-on offensive security activities leveraging social engineering skillsets as part of Red Team engagements against critical JPMC assets * Conduct business process assessments to include tabletop or workshop sessions, live testing of business process controls by technical and social engineering attacks, and preparation of deliverables for senior stakeholders * Design and execute testing and simulations - such as penetration tests, technical controls assessments, cyber exercises, or resiliency simulations, and contribute to the development and refinement of assessment methodologies, tools, and frameworks to ensure alignment with the firm's strategy and compliance with regulatory requirements * Evaluate controls for effectiveness and impact on operational risk, as well as opportunities to automate control evaluation * Collaborate closely with cross-functional teams to develop comprehensive assessment reports - including detailed findings, risk assessments, and remediation recommendations - making data-driven decisions that encourage continuous improvement * Utilize threat intelligence and security research to stay informed about emerging threats, vulnerabilities, industry best practices, and regulations. Apply this knowledge to enhance the firm's assessment strategy and risk management. Engage with peers and industry groups that share threat intelligence analytics Required qualifications, capabilities, and skills * 5+ years of experience in cybersecurity or resiliency, with demonstrated exceptional organizational skills to plan, design, and coordinate the development of offensive security testing, assessments, or simulation exercises * Knowledge of US financial services sector cybersecurity or resiliency organization practices, operations risk management processes, principles, regulations, threats, risks, and incident response methodologies * Ability to identify systemic security or resiliency issues as they relate to threats, vulnerabilities, or risks, with a focus on recommendations for enhancements or remediation, and proficiency in multiple security assessment methodologies (e.g., Open Worldwide Application Security Project (OWASP) Top Ten, National Institute of Standards and Technology (NIST) Cybersecurity Framework), offensive testing tools, or resiliency testing equivalents * Excellent communication, collaboration, and report writing skills, with the ability to influence and engage stakeholders across various functions and levels * Candidate should have the ability to perform targeted, covert security tests with vulnerability identification, exploitation, and post-exploitation activities * Strong understanding of the following: Networking fundamentals (all OSI layers, protocols); Windows/ Linux/Unix/Mac operating systems as well as software vulnerability and exploitation techniques; commercial or open-source offensive security tools for reconnaissance, scanning, exploitation, and post-exploitation (e.g. Cobalt Strike, Metasploit, Nmap, Nessus, Burp Suite) * Familiarity with AI/ML technologies and tools and operationalizing their use in Red Teaming (e.g., developing video and audio deepfakes, etc.), as well as with system administration skills such as configuration, maintenance, and interpretation of log output from networking devices, operating systems, and infrastructure services and with cloud architecture, operations, and security vulnerabilities * Ability to collaborate with high-performing teams and individuals throughout the firm to accomplish common goals * Broad experience in multiple businesses or verticals, with organizational and cultural understanding of call centers, payments processes, client service/sales organizations, and operational support staff * The ability to articulate and visually present complex technical and fraud subject matter to a wide and senior audience * Ability to analyze and produce reports about cybersecurity and fraud vulnerabilities, threats, designs, and procedures Preferred qualifications, capabilities, and skills * Social engineering background (or intelligence, law enforcement, or similar experience) * Experience in fraud detection and prevention, with a proven track record in identifying, analyzing, and mitigating fraud risks within financial systems or similar environments. * Understanding of relevant regulations and compliance requirements related to fraud prevention, such as AML (Anti-Money Laundering) and KYC (Know Your Customer) standards * Relevant certifications such as those offered by Offensive Security (OSCP, OSEP), CREST (Certified Simulated Attack Specialist), SANS (GPEN, GWAPT), fraud-specific certifications such as Certified Fraud Examiner or Certified Anti-Money Laundering Specialist (CAMS) * Technical knowledge such as: developing in-house scripting; using interpreted languages (such as Ruby, Python, or Perl) and compiled languages (such as C, C++, C#, or Java); understanding security tools or technology such as firewalls, IDS/IPS, web proxies, and DLP * Information Security experience in two or more of the following verticals: fraud operations, threat modeling, network/application security testing, social engineering, Red Team operations, and network exploitation operations * Ability to support and grow skillsets for Cybersecurity Red Team operations #CTC

Job Description A machine job shop has immediate openings available for CNC SET UP PERSON, MACHINE OPERATORS, Tool Makers, Press Set up, Machinist, Programmers, Shop Floor Planners, Set-up, and Operators in our CNC and Manual departments for 1st ,2nd, and 3rd shifts. We seek experienced individuals to setup and operate the following CNC Lathes, CNC Mills, WaterJet, Laser, Swiss Screw Machines and Wire EDM equipment. Programming and manufacturing experience REQ D (WE WILL NOT TRAIN YOU, ONLY PERSONS WITH EXPERIENCE PLEASE APPLY) Candidates must work independently and have 3 + years experience. We use late model equipment from Mori Seiki, Fadal, Star, Flow, Amada and Mitsubishi. Our facility is ISO 9001:2000/ AS 9100, The shop is temperature controlled (winter and summer). We offer competitive salary per hour based on employee experience and capabilities: a sign up bonus potential, 401K retirement plan with matching percentage , Year End Bonus, Paid Vacations, Holidays, Sick Days, Life Insurance and Vision. Requirements: Metal working experience Auto CAD/CAM experience is a must for programmers. The ability to operate a CNC machining center for operator employment. The ability to fix minor machine hardware and software problems for set up persons if required. The ability to foresee problems before they occur and correct them at the programming phase. The ability to think out of the box, while being able to take direct instruction. The know-how to read, examine, and understand blueprints. The ability to draft and correct if and when needed for programmers Work overtime and Saturdays as needed. The ability to occasionally direct people. The ability to bring new ideas to our company We offer benefits and vacation after 3 months of employment. We offer Paid Holidays We offer paid Sick days We offer 401k matching We offer Eye Care Insurance We also offer competitive and fair compensation. We are a well-established firm located in the New York Metro area. Please contact us to schedule an interview. Please E-mail your resume and references.

Job DescriptionPosition Description: The Maintenance Mechanic performs works involving skills sets of two or more maintenance occupations to keep machines, mechanical equipment or the structure of an establishment in repair. Duties may involve boiler tending, welding, machining, carpentry, repairing electrical o mechanical equipment, installing new machinery and repairing electrical or mechanical equipment, installing new machinery and repairing buildings floor, stairs and walls. Position Responsibilities: Maintain equipment for food manufacturing production. Adjust functional parts and devices using hands tools. Address boiler issues as required. Inspected electrical motors and devices; repair, remove and replace. Fabricate and repair wooden structure. Estimate repair cost. Record work activities. Good manufacturing practices. Comply with all safety requirements. Additional Information: All your information will be kept confidential according to EEO guidelines. $25,001 - $35,000

All Star Paving & Sealing LLC, Connecticut's premier asphalt paving and maintenance contractor, is excited to announce a career opportunity for a Heavy Equipment Operator. Become an integral part of a dynamic and reputable family-owned business with over 25 years of excellence in the industry. As a leading full-service asphalt contractor, we take pride in providing top-notch services and building strong relationships within our communities. Our team handles everything from residential driveways and parking lots to major roadway projects, along with concrete work, milling, grading, excavation, masonry, drainage and asphalt maintenance. Pay: $25-$35/hr Benefits/Perks: Retirement and Company Match Program after 1 year of service. Supportive, family-oriented culture and opportunities for professional growth. Hours: Seasonal position: April - December Mon - Fri 6am - 4pm, some Saturdays Duties: Operate machinery according to established procedures and safety guidelines. Set up machines before starting production, including calibration and configuration. Monitor machine performance and adjust settings to maintain product quality. Inspect finished products for defects and ensure they meet specifications. Troubleshoot issues and perform basic repairs or adjustments as needed. Maintain accurate production records, including output counts and downtime logs. Conduct routine cleaning and maintenance to keep equipment in optimal condition. Follow safety protocols, including lockout/tagout procedures and use of PPE. Collaborate with supervisors and technicians to optimize productivity. Report equipment malfunctions or safety hazards promptly. Qualifications: High school diploma or equivalent. Experience operating manufacturing or industrial machinery preferred. Basic mechanical aptitude and problem-solving skills. Ability to read blueprints, schematics, or technical documents (preferred). Good attention to detail and quality control awareness. Ability to stand for long periods and lift moderate weights as required. Strong understanding of safety practices in industrial environments. Key Skills: Mechanical and technical skills Attention to detail Time management Communication Troubleshooting Teamwork Basic math and measurement ability