Operator jobs in Philadelphia, PA

The Process Operator micronize\mills client provided material including both active pharmaceutical ingredients and excipients as per Malvern procedures and policies, client instructions and cGMP guidelines. Consistently models values and leadership behaviors in all interactions. Operator I Functions o Perform entry-level micronization and milling of both hazardous and non-hazardous pharmaceutical actives and excipients. o Set up, operate equipment, and monitor production processes. o Report production on batch records following good documentation procedures (GDPs). o Work in a regulated environment with adherence to standard operating procedures and policies. o Adhere to cGMP standards. o Identify and communicate non-routine events, deviations, and GMP deficiencies to supervisor promptly. o Clean the entire processing area and processing equipment. o Produce thorough, clear, and consistent documentation in compliance with Quality Standards (Attributable, Legible, Contemporaneous, Original, and Accurate). o Demonstrate willingness to accept change, learn, and work with new processes. o Stop and ask questions or suggest improvements when something is unclear. o Participate in shift change meetings, site/team meetings, sending/receiving emails, offering suggestions for improvements, and participating in projects. o This is a site-based position. o Strive to achieve First Time Right (FTR) as a key performance indicator (KPI) in order to meet our yearly targets. Measures of Performance: • Adherence to safety and quality procedures • Product quality, throughput and final yields • Excellent attendance, punctuality, and dependability • Operators' work ethic and general attitude as it pertains to the daily operations of the facility Education or Equivalent: High School Diploma or GED Experience: • Must be dependable, ready/eager to learn and able to meet the physical requirements of the job. • Prior manufacturing experience and work in a regulated environment preferred. • Ability to work weekday and weekend OT a plus. Knowledge/Skills Requirements: Technical Skills/Knowledge • Communication Skills Oral and Written • Basic Math Skills, interpretation • Potential limited exposure to heath & physically hazardous chemicals. • Personal protective equipment, including gloves, a respirator hood, safety glasses, safety shoes and other Personal Protective Equipment is provided and is required to be worn in designated areas. • Prior Production Experience preferred Physical Requirements/Work Environment: • Physical strength, stamina and dexterity while wearing fully enclosed air suite • Employees be able to lift or move items up to 44 lbs. (20kg) individually, or with a two-person lift between 45 lbs and 76 lbs. (35kg). 77 lbs and over with a lift assistance device. • Ability to work safely with high potency active pharmaceutical ingredients (HPAPI) as well as novel compounds of unknown potency and toxicity • Ability to perform moderate physical labor including: ? lifting, climbing, bending, ? crouching, reaching and twisting • Ability to stand or walk for up to 8 hours per day. • Ability to climb steps/ladders and occasionally work from elevated platforms. • Ability to wear a respirator hood and pass the required respiratory medical exam. • Ability to work in loud environments and wear various types of hearing protection • Ability to work with chemicals, health/physical hazardous material safely and in compliance with the site safety program SHIFT - MON-THURS 1PM - 11:30PM - START TRAINING ON 1ST SHIFT -$500 SIGN ON BONUS BEFORE CONVERTING TO FULLTIME AFTER 6 MONTHS

Why you will love working at Maola: Built on over a century of dedication, Maola is always looking ahead-investing in our people, strengthening our communities, and securing fresh, local dairy for the future. Join a farmer-owned cooperative rooted in integrity, sustainability, and a passion for providing fresh, high-quality Maola dairy products. We prioritize your well-being with competitive pay and a Union comprehensive benefits package, including Medical, Dental, Vision, 401(k) with employer match, paid time off, and more Our employees are an integral part of who we are - what you do and what you think matters. SUMMARY: The operator oversees the daily operations and workflow of production. May direct at different levels, handling specific duties or cover a wide range of responsibilities. At the core of the production process, the operator may also directly oversee all aspects of equipment maintenance or repair. The operator is expected to efficiently and effectively oversee production to meet and exceed company goals for that shift. Shift: Thursday-Monday, 10:00pm-6:30am Pay Rate: $23.74/h ESSENTIAL DUTIES AND RESPONSIBILITIES: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Responsible to ensure the correct quantity of containers are in the cases. Check the assembly, operation and setting of the machines at the start of operation or shift, as well as throughout the shift. Directs changeovers and ensure the correct product is being run. Ensures timely startups and communicates necessary information to all supervisors and managers. Responsible to direct the operations of more than one line. Provides suggestions to improve the operation and the efficiency of the department and see that all departments work in unison to maintain efficiencies. Responsible to be available to keep the department running when needed, including but not limited to performing all roles in the packing area and in the department. I.E. Ergo Responsible to assist in resolving problems when they arise. Responsible to see all departments work in unison to maintain an efficient plant. Accountable for maintaining high level of compliance with housekeeping, GMP's, and keeping the work area clean and inspection ready. Other duties as assigned by supervisor and/ or management. All employees are expected to support the Safe Quality Food (SQF) Program by following food safety and quality procedures, maintaining hygiene and cleanliness, and reporting any concerns. Team members must understand their role in the SQF System, complete required training, and contribute to a culture of continuous improvement to ensure safe, high-quality products. BASIC REQUIREMENTS: Minimum high school diploma with higher education or certification preferred. Ability to work efficiently in a team environment. Ability to communicate effectively. Must be willing and able to work overtime when needed. Must proactively direct value-added work under slack conditions. COMPETENCIES Communication Communicate clearly and effectively through multiple channels - oral, written, visual, and non-verbal - ensuring our messages are understood and delivered appropriately, whether in-person or digitally. Accountability Take responsibility for actions and anticipate challenges before they arise. Solve problems both within and outside of departments, proactively addressing issues as they occur.  Customer Focused Prioritize understanding and meeting both internal and external customer needs. Ensure high levels of satisfaction and loyalty by anticipating customer requirements and striving for exceptional service. Initiative Proactive in identifying opportunities and addressing potential threats. Act independently and decisively, rather than waiting for situations to demand action. Problem-Solving Possess the ability to identify and address complex issues with minimal guidance. Skilled at analyzing challenges and finding practical, effective solutions.  Collaboration Take responsibility for deliverables while also supporting others to ensure that collective goals are met. Able to work harmoniously with others toward a common goal, recognizing and valuing each person's contributions, is fundamental to successful collaboration.  PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is frequently required to stand and walk. The employee must be able to reach, bend, extend, and lift 50-60 pounds. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. The work environment may require working in the cooler room with varying degrees of temperature and may include contact with water or dairy liquids. Exposed to a noise level of 90 decibels.  The noise level in the work environment is usually moderate/high.  Wet/slippery work conditions. Maola Local Dairies is a farmer-owned cooperative sustainably producing a full suite of nutritious dairy products. Maola processes milk, cream, butter, and dry milk powders through our network of six dairy processing plants. With a keen eye on quality, freshness, and love for the environment, Maola delivers dairy products that are both nutritious and sustainable to our local communities. For more information about Maola, please visit ****************** All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status.

Esposito Construction is seeking an Equipment Operator with field experience for various job sites across the state. Specifically we are looking for team members in NJ. Candidates must have experience running loaders, dozers, excavators and various other machines. Candidates must also have knowledge of site work, earth moving, and utilities installation. Experience with pipe and/or utility work is a plus. We are seeking someone who is motivated, hands-on, self-starter with a proven track record. Benefits: Medical Insurance paid by Esposito Construction for single rate. 401(k) eligibility with company contribution. Dental insurance eligibility. Vision insurance eligibility. Paid time off. Pay: Flexible, experience based $25-40 DOE Responsibilities: Operating equipment and heavy machinery Participating and helping plan day to day crew operations Communicating with sub-contractors Coordinating equipment and materials required for work assigned Providing input for daily and weekly reports for the job Adhering to timelines and communicating when necessary if delays are anticipated Maintaining and helping grow our safety culture Qualifications: Must be able to work in team setting Pipe experience preferred but not required Physically capable to work on your feet and lift/move material productively Must have a good pair of work boots OSHA 10 and/or 30 Preferred Esposito Construction LLC is an Equal Opportunity-Affirmative Action Employer Minority / Female / Disability / Veteran / Gender Identity / Sexual Orientation / Age

Master Heavy Machinery: Join Our Team as a Heavy Equipment Operator at Nick Falcone & Sons, Inc.! Job Title: Heavy Equipment Operators - Commercial Company Name: Nick Falcone & Sons, Inc Salary: Competitive based in experience Full Job Description Nick Falcone & Sons, Inc., a distinguished construction company with a rich history since 1945, is seeking a skilled Heavy Equipment Operator. This role involves operating large-scale machinery to contribute to our ongoing commercial and municipal projects. The successful candidate will play a pivotal role in maintaining our tradition of high-quality workmanship by efficiently handling big equipment and deep excavators at various construction sites Who we are: In West Philadelphia, in 1945, Nick Falcone Sr. began Nick Falcone & Sons by offering residential concrete, new development work, flat concrete & curb work. In 1960, Nick Falcone Jr. & his brother John Falcone expanded the business into heavy highway work & concrete roadway paving. In the late 1970's the company thrived on commercial, new residential developments & heavy highway work. The ownership then changed to the third generation of Falcone's in 1986. With continued success, the business expanded into municipal work & commercial site development. Currently, the fourth generation has already begun to hone their skills & knowledge in order to move towards the next set of leadership goals. Today, Nick Falcone & Sons is proud to employ a dedicated group of loyal & extremely knowledgeable staff to continue our decades long commitment to high quality workmanship. Responsibilities include but are not limited to: Safely operate heavy equipment, including large excavators, dozers, graders, and loaders, as required for commercial construction projects. Use GPS technology to navigate and operate equipment accurately, even in tight spaces and around utilities. Perform deep trench work, including the use of trench boxes and shoring, digging up to 20' deep depending on the project. Read and interpret grade and slope stakes and simple plans to ensure accurate operation of equipment. Perform daily safety and maintenance checks of machinery to ensure optimal operation. Coordinate with site supervisors to plan, organize, and execute activities related to earthmoving, site preparation, and material handling. Assist in the loading and transporting of materials and equipment to and from the job site. Ensure compliance with safety regulations and report any incidents or unsafe conditions to the site manager immediately. Manage and maintain logs of equipment use, maintenance, and repair. The ideal candidate should possess: Proven experience operating large-scale heavy construction equipment, particularly big excavators and deep trench work. Valid operator's license and clean driving record. Strong understanding of construction operations and safety practices, with an emphasis on working safely around utilities and in tight spaces. Physical fitness to handle manual and machinery operations. Ability to work early mornings, weekends, and in varying weather conditions as project demands. Good communication skills and ability to follow verbal and written instructions. Knowledge of GPS-guided equipment is a must. High school diploma or equivalent; additional certification in heavy equipment operation preferred. OSHA 10 certification preferred. Commitment to safety, especially when team members are working in trenches. Benefits: Paperless cloud-based payroll, with direct deposit & employee accessible app Paid Time Off Paid Holidays 401k Plan (with weekly employer contributions) Medical Plan Dental Plan Vision Plan Life Insurance & Long-Term Disability (company funded) Career Development Schedule: Monday to Friday 6:30a - 3:00p Saturday work is available 8-10 hour shift Overtime Potential Work Location: Aston, PA, 19014 - Corporate Office (pick up and drop trucks off daily) Please note that project locations may include Delaware County, Chester County, Montgomery County & Bucks County Join our team and master the operation of large-scale heavy equipment while contributing to high-quality commercial and municipal construction projects! Apply today to become part of our legacy of excellence! We foster a family-like environment where every employee is valued. As an equal opportunity employer, we prioritize diversity in our workforce, recognizing that innovation thrives on varied perspectives. We embrace individuals from diverse backgrounds, including ethnicity, religion, and education, without regard to race, age, gender, or sexual identity.

Line of Business: Other About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Operate yard loader to move and load materials safely and efficiently Perform routine equipment inspections and basic maintenance Maintain stockpiles and ensure material is properly stored and accessible Communicate with dispatch and team members to coordinate loading activities Load customer trucks with different stone products Follow all safety procedures and contribute to a clean, organized yard Perform other duties as needed What Are We Looking For Proven ability to operate heavy equipment with precision and care Strong commitment to safety and operational excellence Ability to work in a fast-paced, outdoor environment Effective communication and teamwork skills Dependable and self-motivated with attention to detail Conditions of Employment Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check Some positions require FMCSA regulated ongoing drug and alcohol testing Work Environment Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level What We Offer $23.61 per hour Benefits through the Union for Medical, Dental, Vision and Pension Union paid vacation, sick leave and holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Job Description At Sibanye-Stillwater Reldan, every role plays a vital part in building a cleaner, greener, and more sustainable future. We're a global leader in fine metal refining and recycling, committed to innovation, environmental responsibility, and operational excellence. We're seeking a reliable and detail-oriented Milling Machine Operator to join our growing team. This hands-on position is ideal for someone who thrives in a production environment, values teamwork, and takes pride in safety, precision, and process improvement. Why You'll Love Working Here Competitive hourly pay with overtime potential. Uniforms, PPE, and safety boots provided from day one. Team lunches every other Thursday. Family-oriented culture with company events, including our annual Company Picnic and Holiday Party. Mission-driven, people-first environment focused on sustainability and safety. Job Purpose To operate and monitor milling and sifting equipment used in the fine metal refining process, ensuring materials are reduced, sorted, and processed according to quality and safety standards that support Sibanye-Stillwater Reldan's global recycling mission. Key Responsibilities Operate ball milling and sifting machinery to reduce and refine processed materials. Identify, sort, and process metals according to type and job instructions. Maintain consistent operation of equipment in a hot and noisy industrial environment. Perform cleaning, descaling, and basic maintenance of equipment as needed. Record data accurately and communicate effectively with team members and supervisors. Follow ISO 9001 quality standards and all company safety procedures. Education and Work Experience Requirements High School Diploma or GED required. Previous experience in milling, construction, cement mixing, ceramics, pharmaceuticals, or recycling preferred. Strong math, mechanical aptitude, and problem-solving skills. Ability to work independently and collaboratively in a team setting. Excellent attention to detail and time management. Physical and Safety Requirements Must have reliable, independent transportation (remote location with no public transit). Ability to lift and move heavy materials regularly. Comfortable working on your feet in a hot, industrial environment. Must be able to wear full PPE, including a Tyvek suit, hearing protection, and supplied air respirator (fit test required). Must comply with all corporate health and safety standards. Compliance Requirements Employment in this position requires compliance with NAID (National Association for Information Destruction) standards and ITAR (International Traffic in Arms Regulations) requirements. Candidates must meet all applicable compliance criteria to be eligible for employment. Schedule Shift: Monday-Friday, 6 AM to 2:30 PM Location: Fairless Hills, PA - onsite only (no remote or hybrid options). Benefits Medical, dental, and vision insurance available the first of the month after 30 days of employment. 401(k) with company match after 6 months: Dollar-for-dollar match up to 3%. Fifty cents on the dollar for the next 2%. Paid vacation, sick leave, and holidays - including community days and the day after Thanksgiving. Life insurance, employee perks, and benefit member discounts. Company-provided safety boots twice per year. Operate within an e-Stewards, ISO 14001, and LEED-certified zero-discharge facility. Equal Opportunity Employer Sibanye-Stillwater Reldan is an equal opportunity employer committed to providing equal employment opportunities to all employees and applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, or veteran status. We are dedicated to fostering a safe, diverse, and respectful workplace built on teamwork and shared purpose. Ready to Make an Impact? If you're ready to turn precision into purpose and be part of a global sustainability leader, apply today. Join Sibanye-Stillwater Reldan and help us create a cleaner, brighter, and more responsible future - one process at a time. Powered by JazzHR rSSzL7oqG3

How many companies can say they've been in business for over 179 years?! Here at ZEISS, we certainly can! As the pioneers of science, ZEISS handles the everchanging environments in a fast-paced world, meeting it with cutting edge of technologies and continuous advancements. ZEISS believes that innovation and technology are the key to a sustainable future and solutions for global change. We have a diverse range of portfolios throughout the ZEISS family in segments like, Industrial Quality & Research, Medical Technology, Consumer Markets and Semiconductor Manufacturing Technology. We are a global company with over 42,000 employees and have over 4,000 in the US and Canada alone! Make a difference, come join the team! What's the role? Shipping Operator is an entry level position. Under close supervision where operations and sequences are specified by written and verbal instructions and established practices, the Shipping Operator will perform routine production duties associated with the lens manufacturing processes. Exceptional attendance record and acute attention to detail are essential to all job functions. Good verbal and written communication and an ability to read English and identify number recognition are also critical skill sets. Analytical and problem-solving skills with the ability to work in a fast paced, multi-task production environment essential. May require vision and / or color hue recognition testing. Must be able to sit, stand, twist and bend for extended periods of time. Must follow safety guidelines with the ability to identify and understand safety items. This includes the ability to keep a clean working environment. Must have a flexible schedule and work overtime when needed. Must have the ability to work in a team setting or independently, as needed. A strong desire to learn is critical, including a positive attitude and approach to work.. May perform other duties as needed. Sounds Interesting? Here's what you'll do: Deliver and pick up orders from eyecare facilities. Obtain signatures and/or payments Record information, such as items received and delivered and recipients' responses to messages. Receive messages or materials to be delivered, and information on recipients, such as names, addresses, telephone numbers, and delivery instructions, communicated via telephone, two-way radio, or in person. Load vehicles with listed goods, ensuring goods are loaded correctly. Generally assigned some tasks within a specified department but may receive cross training on new tasks. Additional tasks as needed. Participate in meetings to enhance departmental communication and efficiency. May train peers. Do you qualify? HS Diploma or equivalent Must have a clean DMV record All candidates, including internal, will be required to pass a drug test. 0-2 years related experience Reliable, honest, dependable and be able to follow directions either written or verbal Customer Service Mindset Must be able to sit or stand for prolonged periods of time Be able perform repetitive movements with upper and lower extremities. Must be able to regularly lift 10 pounds. Must be able to excerpt up to 20 PSI with hands Requires ability to sustain lengthy periods of visual concentration and good hand/eye/foot coordination. Ability to work in a fast-paced, multi-task production environment. Have the ability to focus for long periods of time Have an eye for attention to detail and symmetry Have solid dexterity and mechanical skills Patience to fully see the task through is a must Ability to communicate with other associates in a clear, concise manner Professional demeanor General office/computer experience Working Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Job Conditions/ Complexity: Some overtime may be required. Works on problems of limited scope. Generally follows standard practices and procedures in analyzing situations or data from which answers can be readily obtained. Equipment Used: Must be able to safely drive and operate a company vehicle while wearing a safety belt at all times. Safety equipment and basic office equipment such as computer and calculator may be assigned as determined by management. We have amazing benefits to support you as an employee at ZEISS! Medical Vision Dental 401k Matching Employee Assistance Programs Vacation and sick pay The list goes on! Position Type/Expected Hours of Work This is a full-time position. The hourly pay range for this position is $16.00 - $20.00. The pay offered for this role may be influenced by factors such as job location, scope of role, qualifications, education, experience, & complexity/specialization/scarcity of talent. This position is eligible for a Performance Bonus. ZEISS also offers robust benefits, including medical plans, retirement savings plan and paid time off. ZEISS is an EEO/AA/M/F/Disabled Veteran Employer Your ZEISS Recruiting Team: Christina Choing Zeiss provides Equal Employment Opportunity without unlawful regard to an Applicants race, color, religion, creed, sex, gender, marital status, age, national origin or ancestry, physical or mental disability, medical condition, military or veteran status, citizen status, sexual orientation, pregnancy (includes childbirth, breastfeeding or related medical condition), genetic predisposition, carrier status, gender expression or identity, including transgender identity, or any other class or characteristic protected by federal, state, or local law of the employee (or the people with whom the employee associates, including relatives and friends).

How many companies can say they've been in business for over 179 years?! Here at ZEISS, we certainly can! As the pioneers of science, ZEISS handles the everchanging environments in a fast-paced world, meeting it with cutting edge of technologies and continuous advancements. ZEISS believes that innovation and technology are the key to a sustainable future and solutions for global change. We have a diverse range of portfolios throughout the ZEISS family in segments like, Industrial Quality & Research, Medical Technology, Consumer Markets and Semiconductor Manufacturing Technology. We are a global company with over 42,000 employees and have over 4,000 in the US and Canada alone! Make a difference, come join the team! What's the role? Shipping Operator is an entry level position. Under close supervision where operations and sequences are specified by written and verbal instructions and established practices, the Shipping Operator will perform routine production duties associated with the lens manufacturing processes. Exceptional attendance record and acute attention to detail are essential to all job functions. Good verbal and written communication and an ability to read English and identify number recognition are also critical skill sets. Analytical and problem-solving skills with the ability to work in a fast paced, multi-task production environment essential. May require vision and / or color hue recognition testing. Must be able to sit, stand, twist and bend for extended periods of time. Must follow safety guidelines with the ability to identify and understand safety items. This includes the ability to keep a clean working environment. Must have a flexible schedule and work overtime when needed. Must have the ability to work in a team setting or independently, as needed. A strong desire to learn is critical, including a positive attitude and approach to work.. May perform other duties as needed. Sounds Interesting? Here's what you'll do: * Deliver and pick up orders from eyecare facilities. * Obtain signatures and/or payments * Record information, such as items received and delivered and recipients' responses to messages. * Receive messages or materials to be delivered, and information on recipients, such as names, addresses, telephone numbers, and delivery instructions, communicated via telephone, two-way radio, or in person. * Load vehicles with listed goods, ensuring goods are loaded correctly. * Generally assigned some tasks within a specified department but may receive cross training on new tasks. * Additional tasks as needed. * Participate in meetings to enhance departmental communication and efficiency. * May train peers. Do you qualify? * HS Diploma or equivalent * Must have a clean DMV record * All candidates, including internal, will be required to pass a drug test. * 0-2 years related experience * Reliable, honest, dependable and be able to follow directions either written or verbal * Customer Service Mindset * Must be able to sit or stand for prolonged periods of time * Be able perform repetitive movements with upper and lower extremities. * Must be able to regularly lift 10 pounds. * Must be able to excerpt up to 20 PSI with hands * Requires ability to sustain lengthy periods of visual concentration and good hand/eye/foot coordination. * Ability to work in a fast-paced, multi-task production environment. Have the ability to focus for long periods of time * Have an eye for attention to detail and symmetry * Have solid dexterity and mechanical skills * Patience to fully see the task through is a must * Ability to communicate with other associates in a clear, concise manner * Professional demeanor * General office/computer experience Working Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Job Conditions/ Complexity: Some overtime may be required. Works on problems of limited scope. Generally follows standard practices and procedures in analyzing situations or data from which answers can be readily obtained. Equipment Used: Must be able to safely drive and operate a company vehicle while wearing a safety belt at all times. Safety equipment and basic office equipment such as computer and calculator may be assigned as determined by management. We have amazing benefits to support you as an employee at ZEISS! * Medical * Vision * Dental * 401k Matching * Employee Assistance Programs * Vacation and sick pay * The list goes on! Position Type/Expected Hours of Work This is a full-time position. The hourly pay range for this position is $16.00 - $20.00. The pay offered for this role may be influenced by factors such as job location, scope of role, qualifications, education, experience, & complexity/specialization/scarcity of talent. This position is eligible for a Performance Bonus. ZEISS also offers robust benefits, including medical plans, retirement savings plan and paid time off. ZEISS is an EEO/AA/M/F/Disabled Veteran Employer Your ZEISS Recruiting Team: Christina Choing Zeiss provides Equal Employment Opportunity without unlawful regard to an Applicants race, color, religion, creed, sex, gender, marital status, age, national origin or ancestry, physical or mental disability, medical condition, military or veteran status, citizen status, sexual orientation, pregnancy (includes childbirth, breastfeeding or related medical condition), genetic predisposition, carrier status, gender expression or identity, including transgender identity, or any other class or characteristic protected by federal, state, or local law of the employee (or the people with whom the employee associates, including relatives and friends).

Job Description We are looking for a front loader with experience. Certification is a plus. Must be reliable and responsible with machinery. Must have your own transportation. Needs to be able to work first shift. Pay rate will be discussed at interview.

Under the direct supervision of the Security Supervisor, the part-time Command Station Operator shall be responsible for the operation of a Continuum Building Security and Access System. Also, a Siemens life-safety-fire alarm system as well as a DvTel CCTV System. ESSENTIAL DUTIES AND RESPONSIBILITIES Receive, record, and respond to alarms and other emergencies in and around the Pennsylvania Convention Center (PCC). Monitor security/safety activities in and around the PCC via closed-circuit television (CCTV) monitors and building audio alarms. Coordinate with contracted security supervision to investigate alarms and /or emergencies with PCC Sub Station Police, Philadelphia Fire Department, and area hospitals. Proficient in the use of the Pennsylvania Convention Center's CCTV Surveillance System, including monitoring, recording, and playback. Proficient in maintaining the PCC ISS 247 Electronic Incident Reporting System. Receive incoming calls by telephone, radio, and alarm system. Maintain all applicable Command Station logs as directed. Maintain all applicable Command Station equipment. Monitor Building HVAC and Lighting Systems 24/7. Ability to record and maintain the daily building access log and ensure all persons entering the PCC are entered into the electronic health tracking system via the appropriate application or electronic tablet. Assist with operating the ABI Mastermind management system at all PCC entrances, including visitor registration, security screening, and building labor check-in. Other duties, functions, special projects, and responsibilities as assigned by the Security Supervisor. SUPERVISORY RESPONSIBILITIES None QUALIFICATIONS To perform this job successfully, one must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND EXPERIENCE High School Diploma preferred (2) years in public safety KNOWLEDGE, SKILLS, AND ABILITIES Ability to interface with public, outside representatives, and center clients. CORE RESPONSIBILITIES Monitor alerts: Operators watch security systems, alarms, and surveillance cameras for signs of a potential threat or emergency. Assess and verify incidents: They evaluate incoming alerts to determine if they are genuine before taking action. Dispatch emergency services: Operators dispatch police, fire, or medical services when a real emergency is confirmed. Contact clients: They also communicate with clients, employees, or other designated contacts to inform them of an incident or to verify information. Document incidents: They are responsible for accurately documenting all incidents, responses, and communications. Operate equipment: Operators use a variety of equipment, including computers, communication systems, and surveillance technology, to perform their duties COMPUTER KNOWLEDGE Knowledge of computer equipment, telecommunications, and emergency services radio CERTIFICATES, LICENSES, REGISTRATIONS None PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be required to work both indoors and outdoors as required by the function. Must have the physical ability to maneuver around PCC, at times, walking and/or standing up to 8-10 hours daily. The employee is regularly required to sit for long hours; using hand to handle files, type and operate offices machines; to talk and hear on the telephone. Specific vision abilities required by this job include close vision to handle contracts, other office correspondence, etc. HOURS OF WORK AND TRAVEL REQUIREMENTS Ability to work irregular hours, including shift work, weekends, and holidays. NOTE: The essential responsibilities of this position are described under the headings above. They may be subject to change at any time due to reasonable accommodation or other reasons. Additionally, this document does not state or imply that these are the only duties to be performed by the employee occupying this position. ASM Global is an Equal Opportunity/Affirmative Action employer, and encourages Women, Minorities, Individuals with Disabilities, and protected Veterans to apply. VEVRAA Federal Contractor.

at Cascade Remediation Services, LLC Come join an amazing team of close to 900 employees dedicated to providing Excellence on Every Level! An experienced Heavy Equipment Operator is needed in our Cascade office in Medford, NJ. The role entails safely and efficiency operating a variety of equipment, as well as inspecting, providing preventative maintenance, and occasionally assisting in the repair of equipment, as needed. The Heavy Equipment Operator is proficient in the use of a diverse range of construction equipment, to include Excavators, Loaders, Dozers, Rollers, Graders, Pavers, Skid Steers, and other pieces of equipment. ESSENTIAL FUNCTIONS Operate backhoes, excavators, dozers, skid steers, bob cats, rollers, dump trucks, and other heavy equipment, in accordance with company procedures and safety regulations Ensure proper care of equipment while in use Conduct daily safety inspections of all equipment prior to operation and perform regular checks on the functionality of fleet equipment Document regular maintenance checks to maintain adequate records of equipment performance Promote workplace safety and environmental practices and followed designated safety practices while operating equipment Provide preventative maintenance, as needed, to ensure equipment is safe and operating properly Conduct minor repairs on equipment issues, as needed, and report larger repairs or concerns to the appropriate personnel Perform other essential duties, as directed by management JOB REQUIREMENTS AND QUALIFICATIONS High school diploma, or equivalent, preferred CDL license strongly preferred 10+ years of hands-on experience operating heavy equipment Valid OSHA-40 training Keen attention to detail and situational awareness Strong work ethic and the physical ability to lift 50+ pounds Ability to provide professional work references This position requires 80% travel Cascade Environmental, LLC, and our subsidiaries is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, national origin, age, sex, religion, disability, sexual orientation, marital status, veteran status, gender identity or expression, or any other basis protected by local, state or federal law. This policy applies with regard to all aspects of one's employment, including hiring, transfer, promotion, compensation, eligibility for benefits, and termination. EEO is the Law. Cascade is committed to offering reasonable accommodations to job applicants with disabilities. If you need assistance or an accommodation due to a disability, please contact us at **************. Who is Cascade? From our roots as a Northwest regional drilling company, we have grown into a national, full-service environmental services company offering innovative solutions to our customers. We believe in excellence at every level and that includes hiring employees who are the best at what they do. We firmly believe our employees are the most critical component of our long-term success. At Cascade, we provide a career, not just a job. Cascade's core purpose is to be the essential business partner that contributes to our clients' success and advancement in tackling even the most challenging environmental and geotechnical problems, to contribute to our industry and the betterment of our employee's careers and the communities we serve. What does Cascade offer? Comprehensive training and flexible career paths Encouragement to pursue new roles nationwide, explore a variety of projects, and work with mentors and experts who help shape the industry Comprehensive Medical/Prescription Drug/Dental/Vision 401(k) Retirement Savings Plan with Company Match Company-paid Basic Life Insurance / Short- and Long-Term Disability Health Reimbursement Account and Flexible Spending Account Sick Leave / Holiday / Vacation Pay License Bonuses / Tuition Reimbursement Charitable Donation Match We are proud to provide a full range of benefits programs that help our employees and their families plan for today and their future. The benefits we offer are competitive and allow flexibility and choice to meet the individual needs of our employees and their families. Who are you? Hard-working, talented, and career-minded Challenge-seeking Strong desire to contribute to a stable, diverse organization Work hard, play hard mindset Open to continued learning and development Collaborative, team player Customer service minded To learn more about our exciting career opportunities at Cascade, check out our Careers site at****************************

******************************************* Do you have passion and energy? Do you have experience working with doors and building materials (thats a plus)? Do you want to be part of a company culture of high performing, motivated people working together in a safe and healthy environment where leadership, personal development and teamwork is recognized, valued and rewarded? If yes, then we want to hear from you. This is truly an exciting time to be part of a family owned business since 1931 that offers job stability, competitive pay and a robust benefits program. Direct Millwork is a growing production facility seeking a reliable and ambitious individual to work with a team in our door shop gathering all components to cut to precise sizes, machine to proper specifications and assemble all components to become the finished product. Responsibilities: Lead Operator on sophisticated door machines Work on a production line within a team concept Machining and assemble interior single and twin door units Cross training for competency in specific production processes Prepare finished products for shipment Maintain machines and tools on a daily basis Maintain a clean/safe work area at all times Conduct quality control on finished products Requirements: Qualifications: Previous experience in door manufacturing facilities a Plus Familiarity with basic pneumatic tools, hand tools, light carpentry Familiarity of building materials and light carpentry Ability to read a tape measure a must Capable of working on your feet 8-12 hours per day Capable of lifting and maneuver a minimum of 50 lbs Ability to work well in teams Ability to thrive in a fast-paced environment with attention to detail BGS is an Equal Opportunity Employer and prohibits discrimination and harassment of any kind: BGS is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at BGS are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, family or parental status, sex, sexual orientation, gender identity, national origin, veteran or disability status or any other status protected by the laws or regulations in the locations where we operate. BGS will not tolerate discrimination or harassment based on any of these characteristics. BGS encourages applicants of all ages. PM19 Compensation details: 17-22 Hourly Wage PIc6726b584ad1-31181-38635227

Heritage Fence Company is looking for a Heavy Equipment Operator to join our growing team! This role is a great opportunity for a SAFETY CONSCIOUS individual(s) with a minimum of 5 years of experience. We are celebrating 53 years in the fencing industry! We are focused on customer satisfaction , quality craftsmanship and employee engagement and retention . We pride ourselves on being a “We” Company that takes the safety of our employees very seriously! We service the Residential, Commercial, and Industrial markets in eastern PA, MD, DE and NJ with a focus on all types of Fencing (Wood, PVC, Aluminum, Chain Link, Temporary, etc.) Decks, Railings, Wooden Guide Rails, Dumpster Enclosures, Gate Operators, Access Control and much more! Many of these are Prevailing Wage Work! Come join our team if you are dependable, have a great work ethic and a willingness to LEAD a team to move quickly and efficiently to meet deadlines! Must Have the Following: Experience operating excavators, dozers and loaders Ability to lift 80lbs Reliable transportation to/from the office US Citizenship or Working Visa Valid Driver's License (in order to drive Company vehicle) Ability to pass new hire and random drug test Ability to work full time M - F, 7am - 5pm (May include earlier start times depending on job) with overtime available on weekends Responsibilities Include: Willingness to Travel (Occasional travel due to job location across entire USA) Prepping/loading trucks with materials and tools for daily jobs Checking trucks to make sure all tools/trailers are properly secured Safely demolishing buildings, concrete, asphalt, etc Safely excavating holes, trenches and mass earthmoving Grading slabs, stone, landscaping areas and more Removal of existing fences Safely operating small hand tools and/or large machines Installing fence with direction of Foreman and crew members Daily clean-up of job sites Daily clean-up of yard and trucks Weekly maintenance logs for company vehicles Benefits Offered: Health Insurance, including Vision and Dental 401K Plan (6) Paid Holidays Uniforms Employee Appreciation/Outings: Phillies games, golfing, bowling, BBQ's, Gift Cards Call ************ or visit us at 3890 Skippack Pike, Skippack, PA 19474 Resumes can be emailed to *********************

Cosurac Contractors is looking for a Heavy Equipment Operator to join our growing team! This role is a great opportunity for a SAFETY CONSCIOUS individual(s) with a minimum of 5 years of experience. We are celebrating 54 years in the construction industry with our group of companies! We are focused on customer satisfaction , quality craftsmanship and employee engagement and retention . We pride ourselves on being a “We” Company that takes the safety of our employees very seriously! We service the Commercial, and Industrial markets Nationwide with a focus on all types heavy civil construction. Many of these are Prevailing Wage Work! Come join our team if you are dependable, have a great work ethic and a willingness to LEAD a team to move quickly and efficiently to meet deadlines! Must Have the Following: Experience operating excavators, dozers and loaders Ability to lift 80lbs Reliable transportation to/from the office US Citizenship or Working Visa Valid Driver's License (in order to drive Company vehicle) Ability to pass new hire and random drug test Ability to work full time M - F, 7am - 5pm (May include earlier start times depending on job) with overtime available on weekends Responsibilities Include: Willingness to Travel (Occasional travel due to job location across entire USA) Prepping/loading trucks with materials and tools for daily jobs Checking trucks to make sure all tools/trailers are properly secured Safely demolishing buildings, concrete, asphalt, etc Safely excavating holes, trenches and mass earthmoving Grading slabs, stone, landscaping areas and more Safely operating small hand tools and/or large machines Take direction of Foreman and crew members Daily clean-up of job sites Daily clean-up of yard and trucks Weekly maintenance logs for company vehicles Benefits Offered: Health Insurance, including Vision and Dental 401K Plan (6) Paid Holidays Uniforms Employee Appreciation/Outings: Phillies games, golfing, bowling, BBQ's, Gift Cards Call ************ or visit us at 3890 Skippack Pike, Skippack, PA 19474 Resumes can be emailed to *************************

Berg Construction is accepting applications for an experienced Heavy Equipment Operator. Berg is an excavation / site work contractor that has completed work in multiple sectors, from residential to government contracts. Established in 2000 and incorporated in 2004 we have the manpower and equipment to complete public and private work of any size. Our spectrum of services includes commercial utilities and site work, residential excavating and site work, waste management, golf courses and asphalt paving. Berg was built on the principle of teamwork and the foundation of a strong work ethic. To build enduring infrastructure, we must have highly capable, autonomous and trustworthy teams. We are continually working to build a team of the best people who are hungry to grow and teach. We do our best to keep stress levels low and treat everyone with respect. We provide year-round work to keep steady paychecks and the potential for overtime. Bonuses are awarded when the company does well. We want Berg Construction to be a long-term home for people looking to make a career out of building. A strong work ethic is just as important to us as an existing skillset. While our work is often tough, we get the satisfaction of seeing our enduring infrastructure projects improve the community. Heavy Equipment Operator/Excavation Responsibilities: Operates construction equipment in the loading, hauling and unloading of various equipment, materials and supplies. Operates jackhammers, mowers, brush chippers and other small equipment and tools. Works with and assists the crew in digging ditches and trenches, hoisting material, tools, equipment, and any related work. Performs routine inspection and preventive maintenance on assigned equipment and refers defects or repairs to the supervisor; cleans equipment. Assists in the installing and maintenance of traffic control devices. Plows snow, salts roads, and walkways according to policy. Performs all duties in conformance to appropriate safety and security standards. Perform other tasks as required by management. Requirements: 3+ Years experience in heavy civil excavation Valid Driver's License & reliable transportation Must be pleasant to both internal and external customers, while maintaining a professional attitude and demeanor. Able to follow a task to completion. Regularly required to use hands and fingers to handle, feel or operate objects, tools or controls, as well as reach with hands and arms. Frequently required to stand, talk and hear instructions, walk sit, climb, balance, stoop, kneel, crouch, and crawl. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and the ability to adjust focus. Must dress appropriately for outdoor work, including boots, long pants, and any other provisions required for spending any duration of time outside in the heat, cold, dry, and or wet conditions. Ability to lift or move 25 pounds frequently, and up to 100 pounds on occasion. Work Environment: While performing the duties of this job, the employee regularly works in outside weather conditions. The employee frequently works near moving mechanical parts and is frequently exposed to wet or humid conditions and vibration. The employee occasionally works in high, precarious places and is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and risks of electrical shock. The noise level in the work environment is usually loud. This is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. This job description is subject to change at any time, and does not express or imply an employment contract. Employment with Berg Construction, LLC is employment at will.

Job Title Heavy Equipment Operator I Under direct supervision is learning how to operate overhead crane or other heavy equipment. Moves material to and from designated areas. Inspects incoming material and fills out necessary paperwork. Conducts daily inspection of equipment. Follows all safety rules and procedures. Maintains a safe and clean work area. Handles special projects, as assigned. Essential Functions Under direct supervision, operates various pieces of heavy equipment, moving materials (Mats) to and from designated areas. + Ability to work in a team environment. + Able to demonstrate knowledge of general equipment, maintenance, care, and use of safety equipment on each piece of machinery. + Understand and demonstrate proper rigging for lifting of material and other equipment, hand signals, spotter responsibility and lesser skilled work. + Must be able to adhere to all safety and quality procedures. + Willing to work "boots on the ground", assisting with installing Mats, including the cleaning and repair of Mats as required. Must have the willingness to travel (includes overnights) and the ability to work a flexible schedule and/or holidays - attendance, punctuality and timeliness is a must. Must possess good written and oral communication skills. Class A CDL is strongly preferred. Must be able to pass a criminal background check, motor vehicle record check and drug screen/physical (passing DOT physical may be required if driving large vehicles 10k-26k in weight is needed). Experience with operating a skid steer and loader (non-civil) preferred. May handle special projects, as assigned by manager. Education & Experience Requirements High School Diploma or equivalent. Entry level. Able to demonstrate knowledge of general equipment, maintenance, care and use of safety equipment on each piece of machinery. Understand and demonstrate proper rigging for lifting of material and other equipment, hand signals, spotter responsibility and lesser skilled work. Ability to read, understand, and follow instructions on material paperwork. Good written and oral communication skills. CDL is preferred. Overview **WHY JOIN NPK?** One of NPK's Core Values is Excellence. It means we are committed to delivering value through performance, innovation, and service quality, and that commitment starts with YOU! NPK is where you can challenge yourself in new and exciting ways and work in an environment that supports and values you. Here at NPK, we are committed to finding, developing, retaining, and rewarding the best talent while providing an environment where our employees can grow professionally and personally. **WHAT WE DO** NPK is the only site access solutions partner to manufacture and rent industry-leading sustainable composite matting, along with a full suite of services including planning, logistics, and remediation - so you can protect your people, the environment, and your bottom line. **WHAT WE VALUE** At NPK, our values, safety, integrity, accountability, respect, and excellence are more than words-they are non-negotiable fundamentals that define what is important to us. They are the foundation for our purpose. Our purpose encapsulates how our values work together to drive our decision-making, actions, and behaviors. They help us create meaningful relationships with each other, our clients, and partners. Every day, we strive to live these values and fulfill our purpose, building a culture that reflects who we are and where we're headed. **P** - People Focused - First in every action **U** - United - Different voices make us stronger together **R** - Reliable - Unwavering in our quality and service **P** - Passionate - Energy and excitement is our fuel **O** - Optimistic - Any moment is a chance to shine **S** - Sincere - Authenticity starts with vulnerability **E** - Enterprising - Agility is the key to opportunity How To Apply Register to create an account then search for the vacancy. Click Apply to complete your application online. _We are an equal opportunity employer. NPK and its affiliates do not discriminate against applicants or employees on the basis of race, color, age, religion, sex (including pregnancy and gender identity), national origin, sexual orientation, disability, military service/veteran status, genetic information, or any other protected status. For more information on Equal Employment Opportunity, please click_ _ _ here (************************** _._ _NPK International, Inc.is committed to ensuring equal employment opportunity, including providing reasonable accommodations to individuals with a disability. Applicants with a physical or mental disability who require a reasonable accommodation for any part of the application or hiring process may contact the Manager, HR Governance& Compliance at_ _[email protected]_ _._

JACQUET is an established market leader in the distribution of stainless steel and nickel alloys in plate and round bar. Jacquet strives to be the best supplier of stainless steel and nickel cut parts by providing high quality in-house processing. Metals are sold either as-is or cut to made-to-measure sizes using plasma machines, water jets, lasers or saws. Jacquet applications cover many industrial sectors such as the water, environment, energy, mechanical and forged metal construction, chemical and agri-food, gas processing and storage, pharmaceutical and cosmetic sectors. We have four strategically placed locations within the US including Pennsylvania, California, Texas, and Wisconsin with many more globally. We are currently seeking an experienced Plasma Operator for 1st shift (6am-2:30pm) at our Limerick, PA facility. We offer training, competitive pay, and a comprehensive benefits package. If you have the necessary skills and qualifications, we would enjoy the opportunity to speak with you! Description: The plasma operator is responsible for the safe operation, maintenance, and cutting of stainless steel and nickel alloys per customer specifications. Responsibilities: Take primary responsibility for operation and maintenance of the plasma machine to include Production, Quality, accuracy of Production Logs, and BT/Travelers/Programs. Perform daily, weekly, and monthly maintenance as needed. Assist maintenance whenever requested or directed. Monitor your machines consumables. Cut and remove scrap. Report any deficiencies. Use plates, bars, rems, and programs as specified by Production Control. Prior approval for any changes. Work with QA department on all matters of quality to include quality of cut parts, cutting tolerances, quality statistics and ISO 9000 certification. Ensure that safe work practices are maintained always within your work section and always adhere to safety requirements and wear required protective equipment. Control the neat, orderly and accurate storage of all bar inventory in the plant. Organize the work area of your machines. All tools should be put away in an orderly manner. Maintain and constantly improve upon the cleanliness of your section. Perform other reasonable tasks as requested by the Operations Manager or the floor supervisor. Requirements: Minimum 18 years High School Diploma or Equivalent Ability to read and write English Ability to stand, sit, bend, stoop, and reach Ability to lift 50 lbs. Other Skills: Attention to detail Team player Basic familiarity with computers/software programs Experience: 1+ years prior experience operating a plate or bar saw 1+ year(s) prior experience operating an overhead crane 1+ year(s) prior experience operating a forklift Minimum Additional Training: Experience in math and statistics Pay Range: commensurate with experience Compensation details: 20-28 Hourly Wage PIaacea147d6b4-31181-39167395

Line of Business: Aggregates About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Operate a front-end loader to safely and efficiently feed the crushing plant and load trucks, while reporting directly to the Production Supervisor or Plant Management. Conduct pre-shift inspections, perform routine maintenance, and promptly report equipment issues to maintenance personnel. Maintain clean, organized work areas and ensure roads and berms meet or exceed MSHA standards. Support general pit maintenance activities, including grading, dust control, and drainage. Ensure all pit operations comply with company safety policies and federal regulations. Communicate effectively with team members and supervisors regarding production needs, pit conditions, and equipment performance. Assist in training and mentoring new pit loader operators to promote a culture of safety and accountability. What Are We Looking For Demonstrated ability to safely operate heavy equipment, especially front-end loaders. Strong communication skills and a team-oriented mindset. Commitment to maintaining a clean and safe work environment. Ability to identify and report equipment issues promptly. Willingness to train and mentor new operators as needed. Conditions of Employment Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check. Compliance with all company safety policies and federal regulations is required. Work Environment Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level. What We Offer $26-29 per hour 401(k) retirement savings plan with an automatic company contribution as well as matching contributions Highly competitive benefits programs, including: Medical, Dental, and Vision along with Prescription Drug Benefits Health Savings Account (HSA), Health Reimbursement Account (HRA), and Flexible Spending Account (FSA) AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance Paid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave, and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Job Description At Sibanye-Stillwater Reldan, every role plays a vital part in building a cleaner, greener, and more sustainable future. We're a global leader in fine metal refining and recycling, committed to innovation, environmental responsibility, and operational excellence. We're seeking a reliable and detail-oriented Milling Machine Operator to join our growing team. This hands-on position is ideal for someone who thrives in a production environment, values teamwork, and takes pride in safety, precision, and process improvement. Why You'll Love Working Here Competitive hourly pay with overtime potential. Uniforms, PPE, and safety boots provided from day one. Team lunches every other Thursday. Family-oriented culture with company events, including our annual Company Picnic and Holiday Party. Mission-driven, people-first environment focused on sustainability and safety. Job Purpose To operate and monitor milling and sifting equipment used in the fine metal refining process, ensuring materials are reduced, sorted, and processed according to quality and safety standards that support Sibanye-Stillwater Reldan's global recycling mission. Key Responsibilities Operate ball milling and sifting machinery to reduce and refine processed materials. Identify, sort, and process metals according to type and job instructions. Maintain consistent operation of equipment in a hot and noisy industrial environment. Perform cleaning, descaling, and basic maintenance of equipment as needed. Record data accurately and communicate effectively with team members and supervisors. Follow ISO 9001 quality standards and all company safety procedures. Education and Work Experience Requirements High School Diploma or GED required. Previous experience in milling, construction, cement mixing, ceramics, pharmaceuticals, or recycling preferred. Strong math, mechanical aptitude, and problem-solving skills. Ability to work independently and collaboratively in a team setting. Excellent attention to detail and time management. Physical and Safety Requirements Must have reliable, independent transportation (remote location with no public transit). Ability to lift and move heavy materials regularly. Comfortable working on your feet in a hot, industrial environment. Must be able to wear full PPE, including a Tyvek suit, hearing protection, and supplied air respirator (fit test required). Must comply with all corporate health and safety standards. Compliance Requirements Employment in this position requires compliance with NAID (National Association for Information Destruction) standards and ITAR (International Traffic in Arms Regulations) requirements. Candidates must meet all applicable compliance criteria to be eligible for employment. Schedule Shift: Monday-Friday, 1:30 PM to 10:00 PM Location: Fairless Hills, PA - onsite only (no remote or hybrid options). Benefits Medical, dental, and vision insurance available the first of the month after 30 days of employment. 401(k) with company match after 6 months: Dollar-for-dollar match up to 3%. Fifty cents on the dollar for the next 2%. Paid vacation, sick leave, and holidays - including community days and the day after Thanksgiving. Life insurance, employee perks, and benefit member discounts. Company-provided safety boots twice per year. Operate within an e-Stewards, ISO 14001, and LEED-certified zero-discharge facility. Equal Opportunity Employer Sibanye-Stillwater Reldan is an equal opportunity employer committed to providing equal employment opportunities to all employees and applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, or veteran status. We are dedicated to fostering a safe, diverse, and respectful workplace built on teamwork and shared purpose. Ready to Make an Impact? If you're ready to turn precision into purpose and be part of a global sustainability leader, apply today. Join Sibanye-Stillwater Reldan and help us create a cleaner, brighter, and more responsible future - one process at a time. Powered by JazzHR xm1Bc1exT9