Operator jobs in Somerville, MA

Kelly is hiring a Chemical Operator III for a 12-month Contract role with one of our prestigious clients based out in Marlborough, MA 01752 (Onsite) - 4 days on and 4 days off. The night shift is 6:45 PM to 7:15 AM. The day shift is 6:45 AM - 7:15 PM. Job Title: Chemical Operator III Location: Marlborough, MA 01752 (Onsite) Employment Type: 12-month contract 4 days on and 4 days off. The night shift is 6:45 PM to 7:15 AM. The day shift is 6:45 AM - 7:15 PM. Pay rate: $24.50/hr. for day shift and $26/hr. for night shift. Qualifications: Summary of Job: Perform manufacturing batch processing tasks as specified in written procedures to support the production, packaging, and handling of materials at Semiconductor Technology, Marlborough, MA. The position requires strong communication skills, and attention to detail. ** Work Hours*** : Must be able to work all scheduled times of the shift rotation alternating 4 days on and 4 days off. The night shift is 6:45 PM to 7:15 AM. The day shift is 6:45 AM - 7:15 PM. For example: if the start of the work rotation is on a Monday, the individual would be scheduled to work Monday - Thursday. Then the individual would take the next 4 days off which would be Friday - Next Monday. Finally, the individual would be scheduled to start next rotation next Tuesday - next Friday. This pattern continues forward: 4 days on and 4 days off. If onboarded, training is required for the first 4 weeks and will be done on the day shift, Monday - Thursday (fixed days): 6:45 AM to 5:15 PM. Background/Skill Requirements: o Minimum requirement of High School Diploma or GED. o Experience in a manufacturing environment and/or clean room is preferred. o Fork Truck operation experience a plus. o Strong communication skills and ability to work in a team environment. o Exceptional Attention to Detail. o Self-motivating and hard working. Physical Requirements: o Light to moderate physical effort required. o Standing/Walking for the majority of the 12-hour shift. o Lifting required occasionally of up to 40 pounds. o Bending, pushing and pulling required on a daily basis. o Ability to occasionally work at table level and/or overhead level as necessary. o Required to wear appropriate PPE. o Required to work in a RESTRICTED electrically classified area for use of flammable and combustible materials. Work Environment: o Work performed in a plant environment. o Exposure to elements such as odor, noise, dust, heat, cold, chemical and other elements. o Required to wear appropriate and designated PPE within certain areas of the plant (e.g. hard-hat, goggles, gloves, respirator, cleanroom garment). Responsibilities: o Maintain a safe working environment and participate in all required safety programs, training, and activities. o Follow Operating Discipline principles, procedures and practices to ensure safe and efficient operation of assigned plant areas. o Operate and field check process equipment. Monitor process conditions, equipment and control systems if required. o Receive direction from area leads/supervisor and complete assigned tasks. o Complete routine and repetitive activities such as labeling, forming and filling boxes, moving materials and equipment. If you believe you are a good fit for this opportunity, please submit your application through the job posting link. We also encourage you to share references if you have them.

At indi GO Technologies (Tradename: “GO”), we are changing the electric vehicle paradigm with our own class of ultra-efficient electric vehicles for ride hailing and last-mile delivery use cases. The indi GO line of purpose-built EVs provides the smoothest, roomiest, and most affordable ride using patented SmartWheel technology. Our technology combines premium suspension, a spacious cabin, and low cost-per-mile performance to enable truly sustainable transportation. We are seeking an experienced Manufacturing Operations specialist to help establish and scale-up our manufacturing capabilities. This role will help manage manufacturing facility infrastructure, implement production processes, perform manufacturing project management, and participate in the implementation of manufacturing practices to deliver world-class efficiency, quality, and cost control. Responsibilities: Manufacturing facility setup, layout optimization, and equipment commissioning. Function as part of a high-performing production team. Implement manufacturing best practices and continuous improvement initiatives. Collaborate with product and engineering to integrate manufacturing considerations early in product design. Develop and manage schedules to meet volume ramp-up targets. Track key manufacturing KPIs for efficiency, quality, and cost. Help ensure health, safety, and environmental compliance across operations. Requirements: Bachelor's degree in manufacturing, mechanical, or industrial engineering; Master's preferred. 5+ years in manufacturing operations Experience scaling manufacturing from prototype to volume production. Knowledge of lean manufacturing, Six Sigma, or similar process optimization methodologies. Experience in automotive or complex electromechanical assembly highly preferred. Strong leadership, problem-solving, and organizational skills. Qualified candidates working from our EV facility and HQ in Woburn, MA (20 minutes from downtown Boston) are preferred and will be prioritized. Note that only experienced and qualified candidates should apply, and also state whether they can either work full time in Woburn MA or are open to relocation to the NorthEast area. We are looking for like-minded individuals on our movement to truly impact sustainability. Join us on our mission to change the EV paradigm! indi GO Technologies offers competitive salaries, stock options, flexible hours, and a 401K plan. We support a diverse team, knowing that innovation truly thrives with a variety of backgrounds and experiences. Job Title and Compensation The salary range for this position is between $117,000 and $132,000, based on full-time employment. Actual salaries are based on several factors unique to each candidate, including but not limited to skill set, experience, certifications, and work location. Our open positions are based on job competencies that are specific to each role. If you are offered a position, the job title may be different from what is advertised to align with the role's competencies and your specific background, experience, and interview results. indi GO Technologies is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law.

We're seeking experienced CNC Lathe & CNC Milling Operators to join our clients growing precision manufacturing team in Billerica, MA. This is a great opportunity to join a clean, modern facility that specializes in high-quality metal components for a variety of industries. Schedule: Summer: Monday-Thursday, 6:00 a.m.-4:30 p.m. (4x10-hour days) Winter: Monday-Friday, 6:00 a.m.-2:30 p.m. Pay Range: $24-$30 per hour (based on experience) Type: Temp-to-hire Location: Billerica, MA Set up and operate CNC lathes and/or CNC Milling to produce precision metal components. Load and unload raw materials and finished parts. Monitor machine operations and make minor adjustments as needed. Read and interpret blueprints and technical drawings. Use precision measuring instruments (micrometers, calipers, gauges, indicators) to ensure quality standards. Maintain a safe, organized, and clean work environment. What Our Client is Looking For: 2+ years of CNC lathe and/or milling operation experience Ability to read and interpret blueprints and shop drawings. Strong attention to detail and commitment to producing quality work. Reliable, punctual, and able to work independently with minimal supervision. Must be eligible to work in the U.S. on a full-time basis. Why You'll Love This Role: Consistent first-shift schedule with a 3-day weekend in summer. Competitive pay with potential for full-time hire. Opportunity to grow with a company that values skill and dedication. Desired Skills and Experience Set up and operate CNC lathes and/or CNC Milling to produce precision metal components. Load and unload raw materials and finished parts. Monitor machine operations and make minor adjustments as needed. Read and interpret blueprints and technical drawings. Use precision measuring instruments (micrometers, calipers, gauges, indicators) to ensure quality standards. Maintain a safe, organized, and clean work environment. All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.

CNC Machine Operators 3rd Shift hours are Mon-Fri 10:30p-7:00a The ideal candidate with be responsible for setting-up, operate and troubleshoot CNC machines according to scheduled orders to produce quality machined parts for the Aerospace and Automotive industries. You will also be responsible for troubleshooting issues that arise during the machining runs, completes offsets and adjustments, and assists operators as needed. Machines include lathes, mills, grinders, and manual tools (Haas, Fadal, Mori Seiki, Akuma etc.). Responsibilities Perform set-up for complex/advanced/non-routine jobs independently Use measuring equipment effectively such as micrometers and calipers Work from written procedures and work routers Dismantle jigs, tools, and special fixtures Make tooling as necessary Provides training to co-workers on the operation of CNC machines and inspection methods and tools. Maintain drawing specifications by monitoring dimensional and visual characteristics to detect non-conformances Handle raw material and hazardous waste safely and in an environmentally responsible manner Perform preventative maintenance on equipment Other duties as assigned Requirements High School Diploma or equivalent (will consider candidates with considerable experience in lieu of education requirement) 5+ years of experience in performing adjustments and offsets in CNC Machining for Mills and Lathes (Required) Effective verbal/written communications skills and organizational skills Must have a strong work ethic, attention to detail, good attendance, and flexibility to work overtime as needed The client offers a competitive salary package that is dependent on qualifications and experience, as well as a strong benefit package, plus participation in a company-wide bonus plan. For immediate consideration and faster response, please forward current resume to: ***********************. Please include job #18747 in subject line. Please note that all candidates applying must be a US Citizen or Permanent Resident. Client will NOT sponsor.

About the Company Cipla is a leading global pharmaceutical company, dedicated to high-quality, branded and generic medicines. We are trusted by healthcare professionals and patients across geographies. Over the last eight decades, we have strengthened our leadership in India's pharmaceutical industry and fortified our promise of strengthening our global focus by consolidating and deepening our presence in the key markets of India, South Africa, the U.S., and other economies of the emerging world. Cipla employs handpicked professionals not just for their knowledge and experience but for their zeal to make a difference to the world of healthcare. The company believes that our biggest assets are the employees who lead us to prosperity and growth in the future. Driven by the vision, none shall be denied, Cipla's focus has always been on making affordable, world-class medicines with a reputation for uncompromising quality standards across the world. About the Role The purpose of this role is to assist in packaging manufactured metered dose inhalation (MDI) products in a pharmaceutical manufacturing company. Responsibilities Understanding basics of mechanical machinery and principles of control systems. Operating pharmaceutical packaging equipment with minimum rejection and maximum output maintaining quality standard within standard norms. Cleaning machines and area as per batch to batch and product to product change over. Performing operations and preventative maintenance of machines. Identifying and assisting in the corrective actions of packaging related issues. Correcting status labelling at all stages of packing line with signature. Ensuring that appropriate equipment calibrations are performed, and records are maintained. Ensuring line clearance before initiating packaging activities in each area. Wearing appropriate PPE as stated in the SOP before initiating process. Working individually and in collaboration with others as part of a team. Executing procedures to complete tasks in a safe and efficient manner. Completing documents on time, ensuring accuracy and completeness. Adhering to all cGMPs, compliance/regulatory mandates and quality requirements. Complying with company policies and procedures. Performing duties through the proper safe use of equipment, according to Health & Safety procedures and Equipment Manuals. Performing other related duties as assigned. Qualifications High school diploma or equivalent is required. Accredited college certificate or university degree is preferred. Minimum of one (1) year experience in packaging operations preferred. Proficient in the English language (Speaking/Reading/Writing) to understand work instructions and document results. Knowledge of fundamental cGMP and regulatory requirements in a pharmaceutical manufacturing environment highly preferred. Basic understanding of mechanical machinery and the operating principles of control systems. Ability to follow both verbal and written instructions. Demonstrated ability to work in both independent and team environments. Good knowledge of Health & Safety procedures, including, OSHA. Strong mathematical and organizational skills. Required Skills Minimum of one (1) year of experience working in a pharmaceutical, nutraceutical, cosmetic or other cGMP environment. Hands-on experience with current Good Manufacturing Practices (cGMP) and following Standard Operating Procedures (SOPs). Experience in wearing and working with Personal Protective Equipment (PPE). Preferred Skills Good Documentation skills (writing and reading batch records). Good knowledge of Health & Safety procedures, including OSHA. Pay range and compensation package Salary: USD 39000 - 41000 Compensation Details: Salary Maximum: $19/hr - $20/hr Equal Opportunity Statement We are committed to diversity and inclusivity.

BCforward is currently seeking a highly motivated Insert Operator in Lynnfield, MA 01940 Job Title: Insert Operator Duration: 3 Months Job Type: Contract (40 hrs. a week) Pay Range: $17-$18.50/hr (Please note that actual compensation may vary within this range due to factors such as location, experience, and job responsibilities, and does not encompass additional non-standard compensation (e.g., benefits, paid time off, per diem, etc.). Work Schedule: 3PM to 11:30PM M-F Job Description: Insert Operator is responsible for operating and maintaining production and quality standards on the inserting machines. Duties / Responsibilities - Operator • Operate and maintain production and quality standards on the inserters. o Operator machine at acceptable speeds and quality o Clear Jams • Organize tasks and resources to complete work and meet deadlines according to established departmental procedures. o Minimize time between jobs, by organizing the area and ensuring the inventory is adequate • Set up equipment to ensure documents are processed correctly. • Ensure overall run time is adequate for the type of mail run on shift • Keep machine and area clean • Balance/reconcile jobs • Communicate pertinent information to leads, technicians, and Supervisor a clear and concise manner. • Maintain confidentiality of Clients and its clients proprietary information. • Miscellaneous duties to help Client achieve its goals Additional Duties / Responsibilities • Run multiple inserting types, ie Evolution, MSE, EPIC • Run a variety of product, Letters, Flats etc. • Correct minor equipment problems. • Resolve equipment errors by determining and implementing proper resolution based on reference material and training. • Perform minor preventative maintenance, adjustments, and minor repairs to the printer as needed; contacts maintenance technicians when needed. • Cross train others on multiple inserter types for vacation coverage - Roll and Cut sheet. Physical Requirements • Ability to lift up to 50 lbs. • Ability to stand up to 10 hours each day. • Periodic physical activity requires walking, climbing, bending, standing, pushing, pulling, lifting, and stooping. Benefits: BCforward offers all eligible employees a comprehensive benefits package including, but not limited to major medical, HSA, dental, vision, employer-provided group life, voluntary life insurance, short-term disability, long-term disability, and 401k. About BCforward: Founded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward's 6,000 consultants support more than 225 clients globally. BCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class place to work. BCforward is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against based on disability. To learn more about how BCforward collects and uses personal information as part of the recruiting process, view our Privacy Notice and CCPA Addendum. As part of the recruitment process, we may ask for you to disclose and provide us with various categories of personal information, including identifiers, professional information, commercial information, education information, and other related information. BCforward will only use this information to complete the recruitment process. This posting is not an offer of employment. All applicants applying for positions in the United States must be legally authorized to work in the United States. The submission of intentionally false or fraudulent information in response to this posting may render the applicant ineligible for the position. Any subsequent offer of employment will be considered employment at-will regardless of the anticipated assignment duration.

Job Description The Refreshments Operator II ? SBE is responsible for providing exceptional customer service by ensuring that our customers? products are stocked appropriately. Ensure that customers' equipment is always operating properly, cleaned, and notify them of any new offers that may be of interest to them. Essential functions and responsibilities of the position may vary by Aramark location based on client requirements and business needs. COMPENSATION: The hourly range for this position is $22.00 to $24.00 . If both numbers are the same, that is the amount that Aramark expects to offer. This is Aramark?s good faith and reasonable estimate of the compensation for this position as of the time of posting.? ? ? BENEFITS: Aramark offers comprehensive benefit programs and services for eligible employees including medical, dental, vision, and work/life resources. Additional benefits may include retirement savings plans like 401(k) and paid days off such as parental leave and disability coverage. Benefits vary by location and are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works. For more information about Aramark benefits, click here Aramark Careers - Benefits & Compensation . ? ? ? There is no predetermined application window for this position, the position will close once a qualified candidate is selected. Qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law, including, but not limited to, the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and the San Francisco Fair Chance Ordinance to the extent that those laws apply to the opportunity. Job Responsibilities ? Unload and stock daily inventory at customer site, ensuring freshness of products by monitoring date codes ? Manage the ordering, delivery, and stocking of items at client location ? Communicate with customer's employees about new product interest ? Use a laptop computer to manage stocking PAR levels, product orders and client invoicing ? Performs repairs to best of ability. ? Calls in orders and service calls to head office. ? Distributes promotional materials and merchandises complete product line. ? Cleans equipment and exchanges decanters on each visit. ? Communicates with Route Sales Manager or General Manager regarding customers and reports on pending problems or on evidence of competitors in customer locations. ? Establishes and maintains a good working relationship and liaison with customers to project a positive image of the company and product. At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. Qualifications ? 1-2 years of experience in a position requiring interpersonal skills and customer service skills ? High School Diploma or G.E.D. required ? Client interaction, communication, organization/time management are critical to the success of this role. ? Ability to respond quickly to changing demands. ? Strong sense of urgency and problem-solving skills. ? Excellent written and verbal communication skills ? Physical ability to repeatedly lift packages, up to 50lb (drinks and snacks) ? Must have a valid driver?s license and acceptable driving record. ? Must possess the ability to work efficiently and independently. ? Must be willing to travel to other locations to assist with short notice. ? Role requires frequent Bending, keying/fingering, hearing, speaking, and lifting ? Role requires constant reaching, seeing, standing, and walking Education About Aramark Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at ***************************** or connect with us on Facebook , Instagram and Twitter .aa415a4b-8b21-40fc-a65c-70d2b25ca29a

Pay Range: $32.00 - $42.00 Centuri companies consider several factors when extending an offer, including but not limited to, the role and responsibilities, a candidate's work experience, education, training and skills, and geographic location. Who We Are Are you ready to build your career on Solid Ground? Join the leader in utility construction and get yourself a solid career with solid pay! Established in 1972, New England Utility Constructors Inc. (NEUCO) has been providing underground utility construction solutions to New England for five decades. Known for safety, quality, and excellence, NEUCO specializes in pipeline and natural gas distribution construction. Our well-trained and professional staff aims for excellence on every project. Competitive wages from day one. Paid training and development. Opportunities to advance. At NEUCO, you are part of a team working to support critical utility and energy infrastructure. NEUCO is looking for a Heavy Equipment Operator to join our team! Heavy Equipment Operators, operate equipment to safely move earth, equipment, tools, and materials. What You'll Do * Safely operate heavy equipment such as: skid steers, backhoe, trencher, paver, dozer, milling saw, road grater, hydro-excavator, track hoe and more * Load and unload equipment and materials * Maintain daily pre-shift vehicle and equipment inspections * Perform regular maintenance and cleaning on assigned vehicles and equipment * Maintain all industry required Operator Qualifications * Perform other tasksas requested by leadership What You'll Have * High School diploma or equivalent * Valid Driver's License * 1+ prior year experience of safely operating equipment in close proximity to workers and underground utilities What You'll Get * Weekly Payroll * Employee Discounts * Paid Time Off/Vacation * Career Development Opportunities * 401K w/ Company Match * Voluntary Life Insurance and Short-Term and Long-Term Disability * Competitive Benefit Package including Medical, Dental and Vision Coverage Work Environment * Work sites are outdoors in potentially extreme weather conditions * All worksite safety instructions are written and spoken in English; must be fluent in English * Work includes prolonged and repeated: lifting (including overhead, up to 50lbs); standing; climbing; kneeling; reaching and feeling; crouching and crawling * Flexibility to work various schedules and stay late when necessary with little or no notice * Work is performed within the "red zone" of heavy equipment * Working safely requires quick/accurate hand-eye coordination and the ability to work in a constant state of alertness and safe manner Legal Stuff * Pass pre-employment, random, post-accident, and reasonable suspicion drug screens * Provide valid US work authorization documents for E-Verify * Satisfactory results of pre-employment background check results * Valid driver's license with clean driving record * Pre-employment medical fit-for-duty test; hold/obtain DOT medical card Diversity, Equity & Inclusion Commitment This job description is subject to change at any time. It reflects management's assignment of essential functions, and does not exclude or restrict the tasks that may be assigned. Centuri and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability, or any other status protected by federal, state or local law. Centuri will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. Centuri is a Department of Transportation regulated employer. Certain safety-sensitive positions are covered under the DOT Drug and Alcohol Testing Regulations, 49 CFR Part 40. It is important to note that marijuana remains a drug listed in Schedule I of the Controlled Substances Act. It remains unacceptable for any safety-sensitive employee subject to drug testing under the company's Drug Free Workplace Policy to use or test positive for marijuana. Nearest Major Market: Boston

Through our dedicated associates, Conduent delivers mission-critical services and solutions on behalf of Fortune 100 companies and over 500 governments - creating exceptional outcomes for our clients and the millions of people who count on them. You have an opportunity to personally thrive, make a difference and be part of a culture where individuality is noticed and valued every day. Print Operator Location: Lynnfield, MA Pay rate: $19 per hour Schedule: Monday - Friday 7:00 am - 3:30pm OT during quarterly peak periods. About the Print Operator Role: We are seeking a reliable and self-motivated Print Operator to join our operations team. This role is responsible for running industrial-sized printers, organizing mail items into batches, and preparing them for further processing. The ideal candidate will be comfortable working in a fast-paced, high-volume environment and capable of performing physical tasks and basic equipment maintenance. Key Responsibilities: * Operate Xerox and Cannon printers. * Group mail items into batches and separate them for further processing. * Place completed batches in designated areas for downstream operations. * Perform routine maintenance and basic troubleshooting on inserter equipment. * Regularly lift and move items weighing 25 lbs or more. * Maintain a clean and organized work area. * Adhere to safety protocols and operational procedures. Requirements: * High school diploma or equivalent. * Comfortable working in a high-volume production environment. * Self-motivated and able to work independently with minimal supervision. * Basic computer skills required. * Ability to work 2nd shift and flexible hours based on business needs. * Comfortable with piece-rate compensation structure. * Strong attention to detail and organizational skills. * Ability to stand for extended periods and perform repetitive tasks. * Be eligible to work in the United States. * Must be able to clear any necessary criminal background check and/or drug screening. * Must be at least 18 yrs. of age. Pay Transparency Laws in some locations require disclosure of compensation and/or benefits-related information. For this position, actual salaries will vary and may be above or below the range based on various factors including but not limited to location, experience, and performance. In addition to base pay, this position, based on business need, may be eligible for a bonus or incentive. In addition, Conduent provides a variety of benefits to employees including health insurance coverage, voluntary dental and vision programs, life and disability insurance, a retirement savings plan, paid holidays, and paid time off (PTO) or vacation and/or sick time. The estimated hourly rate for this role is $19.00. Conduent is an Equal Opportunity Employer and considers applicants for all positions without regard to race, color, creed, religion, ancestry, national origin, age, gender identity, gender expression, sex/gender, marital status, sexual orientation, physical or mental disability, medical condition, use of a guide dog or service animal, military/veteran status, citizenship status, basis of genetic information, or any other group protected by law. For US applicants: People with disabilities who need a reasonable accommodation to apply for or compete for employment with Conduent may request such accommodation(s) by submitting their request through this form that must be downloaded: click here to access or download the form. Complete the form and then email it as an attachment to ********************. You may also click here to access Conduent's ADAAA Accommodation Policy.

Tutor Intelligence, an MIT robotics startup, has developed a novel no-code interface to instruct robots on new tasks. We are deploying this technology to factories and warehouses across America, and are growing our team to support 24-7 operations. This is an operational role - perfect for someone who is looking to get involved with technology and join a fast-moving startup. In this role, you will work to keep the robots in the field happy and healthy. Your responsibilities include: * Instructing robots via a web-based portal* Responding to customer support calls and resolving technical issues* Learning protocols for diagnosing and solving robot issues* Tracking robot performance and providing feedback to engineering* Reporting bugs and testing new features This role is shift-based and requires regular weekend coverage. Shift 1: 6:30am - 3:30pmShift 2: 3pm - 11pmShift 3: 11pm - 7am (Overnight) Shift 4: 11am - 7pm (Sat-Weds) We have weekend and holiday operations, which mean you will be scheduled for at least one weekend day and holidays (as needed). This opportunity comes with benefits, including health insurance. We are fully in-person in Watertown MA, with parking onsite. We are a startup looking for people who are eager and excited to do what they can, to ensure the team is making progress and our mission is successful. If this sounds like you (and you don't mind hanging with a bunch of robot nerds :), then we look forward to your application!

Job Description Methuen Construction is a leading self-performing industrial and heavy civil general contractor with over 65 years of experience. We specialize in the construction of water and wastewater treatment facilities, industrial facilities, and other critical infrastructure projects. Serving private, municipal, state, and federal clients across the Northeast, we deliver innovative, well-planned projects that are completed on time and with an uncompromising focus on safety. At Methuen, we foster a culture of teamwork, respect, and a can-do attitude that values every teammate and stakeholder. Methuen Construction is seeking a Heavy Equipment Operator to provide essential support to the Department Name department. This position reports to the Manager Title and is not responsible for the oversight of other teammates. This is a full-time, salaried-exempt position. Your Role Inspect and operate equipment and all attachments Attend and participate in daily activity plans and safety meetings Knowledge of rigging and rigging methods Operate equipment in a safe and professional manner Perform daily equipment upkeep tasks and maintenance Ability to understand and follow directions Perform occasional typical laborer activities Ability to set and follow grades Provide other support as needed Core Competencies Proven ability to excel in a fast-paced environment Strong team player with a positive attitude Hard working and motivated Supervisory Responsibility This position is not responsible for the oversight of any other teammates. Position Type This is an hourly, nonexempt position. Travel Primarily limited to Northeast job site locations. Education and Experience Minimum 5 years of experience operating heavy equipment such as Loaders, backhoes, excavators, dozers, lulls, and forklifts, for civil and site work, and material handling functions on a municipal, commercial, industrial, or federal project. Must have a valid driver's license and an MVR that meets company standards Must possess required licenses preferable 2A or more Mass Hydraulics License Must have an OHSA 10 certificate MA Hoisting license required Work Environment/Physical Demands Ability to lift 50 pounds Ability to stand for extended periods of time, and safely maneuver around the nearby presence of various construction equipment and vehicles, on an active construction site Prepared to regularly encounter moving mechanical parts, high precarious places, fumes or airborne particles, and a variety of outside weather conditions Able to climb temporary or permanent stairs, and ladders Able to bend, squat, kneel, crawl, crouch, balance and stoop, reach on a regular basis Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus Benefits Group health & welfare benefits including options for medical, dental and vision Company Benefits: Employee Life Insurance & Accidental Death & Dismemberment (AD&D), Spouse and Dependent Life & AD&D, Short Term Disability (STD), Long Term Disability (LTD), Employee Assistance Program and Health Advocate Voluntary benefits at discounted group rates for accidents, critical illness, and hospital indemnity Flexible Time Off Program (includes vacation and personal time) Paid Sick and Safe Leave Paid Parental Leave Program 10 Paid Holidays 401(k) Plan (company matching contributions up to 4%). Employee Referral Program Equal Opportunity Employer, including disabled and veterans. Pay range: $41 - $61/hr. Please note that all positions require pre-employment screening, including drug and background check, as a condition of employment. Why You'll Love Working Here Methuen Construction is widely recognized as one of the most successful, self-performing general contractors in the industry. Built on over 65 years of experience, Methuen Construction employs the highest skilled trades professionals and managers. As we expand our construction territory, diversify our client base, and enhance our operational capabilities, our need for highly skilled teammates is growing! We offer top-tier compensation and benefits, in addition to a team oriented, motivated, and respectful company culture. #LI-HP1 #LI-Onsite

Job Description Loader Operator Compensation: $20.00 to $27.50 per hour. Job Location: All construction sites are in southern NH and within 30 minutes of our Bedford office. Job Type: This is a full-time hourly position. Employees are eligible for regular benefits after 90 days which include: Health insurance Dental insurance Vision Insurance PTO Accrual Program Supplemental Insurance (Life, Accident, LTD, STD) EAP Position Summary: We are hiring an experienced Loader Operator. This position will vary in tasks and could range from working with the pipe crew installing underground utilities, to installing septic systems, digging and backfilling foundations, bringing site to grade, installing stormwater controls, etc. If you're reliable, safety-focused, and ready to work hard as part of a team, we want to hear from you. Education: High school diploma or equivalent required Skills & Requirements: Proven expert experience operating excavators in a variety of environments Ability to read and follow grade stakes or verbal instruction for determining grade, excavation depth or position; GPS experience preferred. Comfortable working in adverse weather conditions Able to work safely around live utilities Must follow all safety protocols and wear required PPE (hard hat, boots, hearing protection, etc.) Ability to perform basic maintenance and pre-checks on equipment Valid driver's license Responsibilities: Support crews in all excavation environments Support the rest of the crew with safe trenching and backfilling operations Work closely with foreman and crew to meet project specs and deadlines Maintain safe working distances and proper slopes in trenching and excavation as required by OSHA standards Be aware of the condition of the machine while operating and report any issues Perform maintenance on the machine such as greasing the machine each morning, keeping the cab clean, properly inspecting the equipment each shit. Perform general laborer duties when equipment is not in use which include: Lifting and Carrying Items weighing as much as 50 Lbs. Standing and Walking Bending, Stooping, and Kneeling Climbing Pushing and Pulling Shoveling, raking, sweeping, etc. Use power tools About Us: LaMontagne Builders, Inc. - Three generations of building reputation. Are you ready to join a legacy of excellence that spans three generations? At LaMontagne Builders, Inc. (LBI), we take pride in our deep-rooted history as a family-owned residential developer. Nestled in the picturesque town of Bedford, NH, we have been shaping the landscapes of southern New Hampshire for nearly six decades. Our unwavering commitment to quality and innovation sets us apart in the industry. Why Join Us: At LBI, we believe in the power of family and personal development. Our success isn't just about constructing homes; it's about fostering an environment where our employees thrive, both professionally and personally. We invest in our team's growth and well-being because we understand that a fulfilled team translates into remarkable work. We offer a dynamic work culture where you're not just an employee; you're part of a family. Opportunities for professional advancement and skill development are at the heart of our ethos. Our commitment to work-life balance ensures you have time to nurture your personal growth. Join us at LBI, where we build not only homes but also fulfilling careers. #hc203514

As part of the Research & Advanced Development group, you will research and develop new approaches to solving challenging manipulation problems for real-world robotics systems, allowing them to understand and interact with their environment in unprecedented ways. Your work will contribute to enhancing the capabilities of our robotic solutions and explore new solutions and approaches, unlocking new value we deliver to our customers. This position offers a unique opportunity to work at the cutting edge of robotics applied to real-world challenges. This role will be onsite at the Bedford, MA office. This position will run from approximately Jan. - June 2026 (dates flexible). We are seeking interns in a variety of disciplines related to robot learning including: Imitation learning for complex, agile manipulation behaviors with suction and finger-based grippers Reinforcement learning to improve manipulation robustness and dealing with new situations AI systems (VLM, other) applied to various warehouse tasks, such as dealing with unexpected situations, dense packing, or error/damage detection. Gripper morphology optimization across large scale product data In this role you will: Perform applied research in robot learning to address real-world warehouse challenges Collaborate with other researchers and engineers to apply research findings to our robots Leverage production data and our internal development systems to implement and evaluate your solutions Qualifications Currently pursuing an advanced degree (MS or PhD) in Robotics, Machine Learning, Computer Science, or a closely related field. Strong software development expertise in Python; C++ is a plus Demonstrated proficiency with major deep learning frameworks such as PyTorch Experience with modern machine learning methods such as imitation learning, reinforcement learning, generative models, vision transformers, or related. Exposure to developing ML models for hardware interacting with the real world Experience developing in Linux (Ubuntu) and ROS COOP-2515TK

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. The Loader Operator will be responsible for moving and loading vehicles with a company-provided front-end loader or forklift. In addition, the Loader Operator will be required to maintain documentation of vehicle movement around the facility. Furthermore, the Loader Operator will be responsible for the daily pre and post-trip inspections and associated documentation of their assigned machine. In addition, the operator will maintain a safe work environment and be required to follow and be held accountable to company guidelines for safe loader operation. Finally, through a thorough understanding of Copart policy, the Loader Operator will facilitate the Copart experience by offering solutions to meet customers' needs. Ensures equipment is maintained according to company standards and customer contracts. Operates company equipment safely. Assists with the maintenance of company equipment and vehicles. Records vehicle information accurately and legibly. Operates digital camera or other basic vehicle documentation and tracking devices. Sets up yard for auctions within company timelines. Provides service to customers as needed. Maintains a positive and professional demeanor. Follows yard guidelines to maintain a safe working environment (i.e. speed limits, etc.). Must be able to load and unload vehicles as required. Must be able to pass training and safety requirements. Performs other duties as assigned. Required Skills & Experience: HS diploma or GED preferred. At least two years of work experience, preferably in an outdoor environment. One year of loader or forklift experience, certification preferred. Excellent customer service attitude and skills. Excellent communication skills, written and verbal. Positive attitude/High Integrity. Ability to operate heavy equipment. Must be able to multi-task in a fast-paced environment. Strong attention to detail. Occasional O.T. as needed. Bilingual skills a plus. Pay $23.40 - $26.31 per hour Benefits Summary: · Medical/Dental/Vision · 401k plus a company match · ESPP - Employee Stock Purchase Plan · EAP - Employee Assistance Program (no cost to you) · Vacation & Sick pay · Paid Company Holidays · Life and AD&D Insurance · Discounts Along with many other employee benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: E-verify Participation Right to Work

Who we are: Callahan Construction Managers is a full-service construction management company based in Bridgewater MA, with regional offices in White Plains, NY. Callahan has served the New England and Northeast regions as a family business for over 70 years. As one of the region's largest open shop construction firms, Callahan provides a wide range of preconstruction and construction management services to local, regional, and national clients. Callahan enforces a high quality and innovative approach to all projects, including multi-family residential, senior housing, affordable housing, hospitality, life sciences, corporate office, educational, retail and other markets. Visit ******************** for more information. Summary/objective : Callahan Construction Managers is a full-service construction management company based in Bridgewater MA, with regional offices in White Plains, NY. Callahan has served the New England and Northeast regions as a family business for over 70 years. As one of the region's largest open shop construction firms, Callahan provides a wide range of preconstruction and construction management services to local, regional, and national clients. Callahan enforces a high quality and innovative approach to all projects, including multi-family residential, senior housing, affordable housing, hospitality, life sciences, corporate office, educational, retail and other markets. Visit ******************** for more information. Essential functions: The Heavy Equipment Operator must be able to operate bulldozers, front load loaders, excavators, etc. A hydraulic license is necessary. Ability to adhere to safety guidelines of heavy equipment Understands and knows how to read plans work efficiently with minimal supervision Required education and experience: Valid Driver's License Valid Massachusetts Hydraulics License Minimum of two years' experience operating heavy machinery All qualified applicants will be afforded equal opportunity. There shall be no discrimination based on race, color religion, sex, sexual orientation, gender identity, national original or on an applicant's status as a protected veteran or as individual with a disability.

Are you looking for a fulfilling career opportunity this winter? Can you safely operate heavy equipment and do a thorough snow removal job? If YES, then this Loader Operator - Skid Steer Driver position with Groundhog Landscaping could be a great fit for you! We're looking for a motivated person to join us on a seasonal, on-call basis and help remove snow from properties around Derry, NH and the southern part of the state. When you join us, you earn $28.00 - $30.00/hour depending on experience. We provide newer heavy equipment in great running condition, complete with heated cabs and radios! Do you take pride in a job well done? Are you eager to make a difference? Don't wait - apply today! OUR MISSION As one of the largest full-service landscape companies in southern New Hampshire, Groundhog Landscaping provides high-quality, reliable, and affordable grounds maintenance and construction services. Since 1995, we have served our residential and commercial clients to the best of our abilities. Our team is passionate about their work, and we encourage continual growth and professional advancement. Whether you're looking to build a fulfilling landscaping career or an opportunity to grow with a dynamic, thriving team, we have something to offer you! YOUR SCHEDULE Our Loader Operator - Skid Steer Driver has a seasonal, on-call schedule. YOUR DAY In this role, you travel to commercial properties throughout southern New Hampshire and complete thorough snow removal responsibilities. You use heavy equipment to clear, move, and transport snow around the property, ensuring clients can easily get around. You jump into action whenever you're needed, playing a crucial role in our continued success and client satisfaction! REQUIREMENTS Ability to get to assigned locations throughout southern New Hampshire Ability to operate heavy equipment safely and efficiently Do you feel ready for this snow removal challenge? Apply to be a seasonal Loader Operator - Skid Steer Driver today! Fill out our initial application to help us take great care of clients this winter.

North East Weathered Services, LLC is a trusted provider of snow removal. We pride ourselves on our commitment to safety, quality, and customer satisfaction. Our team operates in a fast-paced, outdoor environment, and we are looking for dedicated individuals to join us during our busy season. Job Description: We are seeking skilled and reliable Ventrac/Small Loader Operators for on-call, seasonal positions. The ideal candidates will be available to respond to work as needed, particularly during peak service times. The position requires operating Ventrac tractors and small loaders for snow removal. Qualifications: OSHA 10 certification is mandatory. Experience operating Ventrac tractors and small loaders is preferred. Availability to work on-call, including nights, weekends, and holidays as needed. Strong understanding of safety protocols and procedures. Ability to work independently and as part of a team. Reliable transportation to and from job sites. Physical Requirements: Ability to work outdoors in various weather conditions. Capable of lifting and moving materials up to 50 pounds. Physical endurance to perform manual labor as required. Compensation: Competitive hourly wage based on experience. North East Weathered Services, LLC is an equal opportunity employer. We encourage applications from individuals of all backgrounds and experiences.

The Loader Operator I is responsible for operating heavy equipment and trucks, setting up equipment for auction in yards and helping customers during and after auctions. Experience operating heavy machinery. Able to operate a large 36,000 lbs forklift is an asset. Good spoken and written English is required. Good computer skills and able to learn new programs quickly. A track-record of working safely, and helping others work safely, too. You must be able to relate well with customers and team members. You like to work in a team, helping out wherever needed; but you can also self-start and work on your own. Organized, and can handle lots of multiple tasks at once. A high level of attention to detail. Responsible for operating all types of heavy equipment and trucks. Accountable for helping to set up equipment in the yard for auctions. Help customers load their equipment purchases, and answer their questions related to the yard. Actively support the RB Unreserved Commitment to Safety: to send everyone home, every day, the way they came to work, by taking personal responsibility for your safety and safety of your team, co-workers and customers. Perform other duties as assigned.

Join a growing manufacturing team in Nashua, NH as a CNC Machine Operator. This is a great opportunity for someone with basic CNC Machining knowledge who is ready to learn, grow, and contribute to a collaborative and safety-focused environment. Pay rate: $22/hr | 2nd Shift | Nashua, NH Schedule: Monday-Friday, 3:30 PM - 12:00 AM What You'll Do: Operate CNC machines (no setup required) to produce precision components Follow work instructions and review specs to understand operational steps Load raw materials and unload finished parts Perform in-process inspections using measuring tools, thread gauges, and documentation procedures Conduct secondary operations like filing, sanding, and drilling as needed Maintain a clean and organized work area What You Bring: High school diploma or GED Up to 6 months of CNC or manufacturing experience Ability to read and understand blueprints Familiarity with measuring tools such as calipers, micrometers, and gauges Detail-oriented with a focus on quality and safety This is an excellent opportunity for someone starting out in manufacturing who enjoys hands-on work in a team-based setting. Desired Skills and Experience Operate CNC machines (no setup required) to produce precision components Follow work instructions and review specs to understand operational steps Load raw materials and unload finished parts Perform in-process inspections using measuring tools, thread gauges, and documentation procedures Conduct secondary operations like filing, sanding, and drilling as needed Maintain a clean and organized work area All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance. For unincorporated Los Angeles county, to the extent our customers require a background check for certain positions, the Company faces a significant risk to its business operations and business reputation unless a review of criminal history is conducted for those specific job positions.