Heavy Equipment Operator - Commercial Heavy Grade
Operator job in Wilmington, NC
AVAILABLE POSITIONS: 2
PRIMARY FUNCTION:
Operate one or several types of power construction equipment including but not limited to motor-graders, bulldozers, rubber tire backhoes or trackhoes, rollers, articulated dump truck drivers, front-end loaders or hydraulic excavators to excavate, move, and grade earth, erect structures, or pour concrete, asphalt, or other hard surface pavement on roadbeds, parking lots, airport runways and taxiways. Will perform minor repairs and maintain equipment in addition to other duties.
ESSENTIAL DUTIES:
Commercial Heavy Grade
1.) Load and move dirt, rocks, equipment, or other materials, using trucks, power cranes, shovels, or related equipment.
2.) Start machine, engage clutch, and push and move levers, switches, and pedals to guide machine along forms or guidelines and to control the operation of machine attachments, such as blades, buckets, scrapers, or swing booms.
3.) Drive and maneuver equipment equipped with blades in successive passes over working areas to remove topsoil, vegetation, or rocks or to distribute and level earth or terrain.
4.) Operate machinery to spread, smooth, level, stone, concrete, or asphalt on road beds or other job sites as needed.
5.) Operate tamping machines or manually roll surfaces to compact earth fills, foundation forms, and finished road materials, according to grade specifications.
6.) Observe grade in order to adjust machine settings to correct uneven areas such as high or low areas where materials may need to be added or cut.
7.) Conduct documented pre-shift inspections of equipment for safety and mechanical defects in accordance with company TPR standards.
8.) Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year.
9.) Align machines, cutter heads, buckets or depth gauge markers with reference stakes and guidelines or ground or position equipment, following hand signals of other workers.
10.) Coordinate machine actions with other activities or trucks by positioning or moving loads in response to hand or audio signals from crew members.
11.) Inspect, clean, maintain, and repair equipment, using mechanics' hand tools. Conduct pre-shift inspections and report any concerns or malfunctions to supervisors.
12.) Learn and follow safety regulations and be held responsible for at-fault accidents.
13.) Take actions to avoid potential hazards or obstructions, such as utility lines, other equipment, other workers, or falling objects.
14.) Perform necessary work while complying with all company policies and procedures as well as any regulatory authority (i.e. OSHA, MSHA, etc.)
15.) Perform additional duties as required or directed by their immediate supervisor or other manager.
16.) From time to time will preform general labor duties such as shoveling, raking, climbing inclines, as well as lifting, carrying, and loading materials on uneven terrain.
MINIMUM REQUIREMENTS:
Education:
High school diploma or GED preferred
Must be a minimum of 21 years old.
Work Experience:
Minimum of 2 years' operating heavy equipment experience on a backhoe, dozer or excavator.
Must be able to fine grade with a bulldozer and excavator.
Experience on multiple machines a plus.
Grading and excavation on commercial job sites required.
Must have a good work ethic and work as a team player.
If not operating heavy equipment the candidate will be required to perform general labor work if needed.
Qualified candidate should be able to read plans and work with grades.
Other:
Must have reliable and dependable transportation to the job site.
Working outside in all types of weather is a must in this industry.
Regular and constant attendance is a must.
If needed, must be willing to work nights and weekends.
Applicant must be able to pass a background check for the NC Ports and military bases.
Heavy Physical Demands:
Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required.
Physical Activity:
Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions.
The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time.
EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.
Shop / Equipment Operator
Operator job in Wilmington, NC
Job Description
Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking a Shop / Equipment Operator in our Wilmington, NC office.
The Shop / Equipment Operator will be responsible for:
Completing work as assigned by the shop supervisor.
Assisting in running shop machinery and equipment (i.e., CNC laser, waterjet, press brakes, shears, milling machines, lathes, etc.)
Providing technical assistance (i.e., interpretation of drawings) as needed.
Assuming adherence to safety policies and procedures. Ensuring compliance with project procedures, safety program requirements, work rules, etc.
Perform all other additional assignments per supervisor or project manager's direction.
Ideal Candidates Should Have:
Physical requirements include, but are not limited to:
Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions.
Work in awkward spaces and/or positions including confined spaces and climbing.
The ability to routinely lift up to 75+ lbs.
Excellent hand/eye coordination, depth perception, and peripheral vision.
Essential Requirements & Skills:
Requirements
Mechanically Minded
Familiar with piping systems.
Familiar with hand and power tools.
Welding experience.
Experience with press brakes and shears.
Experience with waterjet, laser, and plasma machines.
Ability to read drawings/sketches and blueprints.
Valid Driver's License and a clean driving record.
Excellent communication skills and commitment to safety.
Additional Skills
HS Diploma or Equivalent (Preferred)
Bilingual Skills (English/Spanish) is a plus.
Competitive Benefits Package:
Health / Dental Insurance
Disability
Life Insurance
Paid Time Off: Vacation and Holiday
401(k) with company match
And more!
Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge.
Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************
Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.
Chemical Operator
Operator job in Castle Hayne, NC
Job Description
Operate and monitor chemical processing equipment to ensure optimal performance and safety.
Conduct routine inspections of machinery and equipment to identify any issues or maintenance needs.
All operators are expected to work as a team and use consensus decision making to achieve departmental goals and objectives.
Maintain accurate records of production data, including batch numbers, quantities, and quality control measures.
Collaborate with team members to implement lean manufacturing practices for improved efficiency.
Read and act upon daily area operating instructions. Provide feedback to supervision on operational issues, related to process conditions, improvement ideas, operational instructions, etc.
Provide shift change relief. Conduct hourly (minimal requirement) tours of manufacturing area to ensure good operating condition of all equipment. Identify and resolve mechanical and/or process-related issues.
Check levels, temperatures, pressures etc. Communicate findings to supervision. Collect and analyze process samples. Record results on prescribed schedule.
Work regularly assigned shifts and provide a fair and equitable amount of overtime for co-worker absences, illnesses, vacations, holidays, etc.
Assist in materials handling, including the safe transport of chemicals within the facility.
Adhere to all safety protocols and SOP guidelines to maintain a safe working environment.
Participate in training programs to enhance skills related to machining, fabrication, and forklift operation.
Qualifications:
High school diploma or equivalent required
Process Technology degree or certification
Ability to read, write, and speak English fluently
2-3 years' experience working with machinery, mechanical, and chemical processes
No fear of heights or confined spaces
Experience with materials handling techniques and safety practices.
Proficient computer skills, the ability to use process control software and enter data
Ability to perform mathematical calculations
Ability to complete Hazmat training
Strong problem-solving skills and the ability to troubleshoot equipment issues effectively.
Commitment to maintaining high standards of safety and quality throughout all operations.
Possess a valid driver's license
Must have clarity of vision at 20 feet or more and at 20 inches or less.
Able to judge distances and space relationships.
Peripheral vision is needed while eyes are fixed.
Eye adjustment is used in doing near point work. Able to identify and distinguish colors.
Express ideas by spoken word, as well as perceive the nature of sounds.
Must be able to speak and hear other plant employees, vendors, customers, etc.
Preferred Qualifications:
Associate degree in chemistry or related field
Lean manufacturing experience
boiler experience
Certified forklift operator
3-5 years' experience as a process/chemical operator
Pipefitting experience
Experience in instrumentation & industrial electrical components
Environmental Conditions:
Job duties occur both inside and outside. There is exposure to extreme temperatures, moisture, humidity, and loud noises
Gases, dust, odors, fumes, and mists associated with normal chemical plant operation may be present
In production areas employees must wear company supplied protective equipment such as hard hat, safety glasses, respirator, gloves, slickers, and boots
Must be able to climb stairs, bend, stoop, walk, twist, grasp, pull, push, reach overhead, and lift up to 50 pounds
Benefits:
401(k)
401(k) matching
Dental insurance
Employee assistance program
Flexible spending account
Health insurance
Health savings account
Life insurance
Paid time off
Parental leave
Safety equipment provided
Vision insurance
Join us as we strive for to maintain a safe, efficient, and welcoming environment for all!
12 hour rotating shifts
Overtime as needed
Call in as needed
Plant Operator (Castle Hayne, NC/Kenansville, NC)
Operator job in Wilmington, NC
Barnhill Contracting Company's success is built on the values, principles and vision of the man - Robert E. Barnhill, Sr. - whose name we proudly bear. Robert Barnhill built this company on a foundational belief that there is power in people. He was a motivator. A hard worker. A leader of leaders. His passion for people and his firm belief in the Golden Rule - treating others as you want to be treated - still drive us today. We are firm, flexible and honest. We do the right thing, every single time. We empower our leaders in the field to be decision makers. We are easy to work with - a core philosophy that is both intentional and deliberate. One that requires discipline. Grit. All of these qualities, along with our founder's vision, have helped grow Barnhill Contracting Company into one of the Southeast's leading contractors.
Our success is built from the dedicated service of each and every one of our employees. Construction is hard work - long hours and immense pressure to meet critical deadlines - and we are proud to employ the most talented group of people in the industry. When you join the Barnhill team, you become part of the Barnhill Family.
Job Description:
Operates plant and plant operations which includes the manufacturing of asphalt products and design mixes. Duties include maintaining revenue, inventory, materials, quality assurance/control, human resources, and information systems records. Makes recommendations to improve productivity, quality, and efficiency of operations. Required to meet certain certifications in asphalt operations. Familiar with a variety of the field's concepts, practices and procedures. Relies on extensive experience and judgment to plan and accomplish goals. Performs a variety of complicated tasks such as major maintenance and repair. A wide degree of creativity and latitude is required. Typically reports to Superintendent of the asphalt plant operations.
Job Duties & Responsibilities:
Supervise a crew of 2 to 5 employees at times depending on the schedule.
Must be able to communicate to top management, suppliers, vendors, safety compliance officers and customers to facilitate a safe workplace while performing daily supervision of personnel and equipment.
Must have the ability to produce quality product in a timely manner.
Must have the knowledge of proper asphalt production and all equipment associated with everyday operations.
Must have the ability to lead people and keep daily job cost records, quantities, cost and employee time records.
Must be able to conduct safety huddle and toolbox safety meetings with the crew.
Minimum Qualifications & Training:
Two or more years of asphalt plant operations.
Ability to abide by and communicate precise instructions and be well versed in fall prevention, protection regulations and practices.
Have knowledge in the construction field and safety regulations that are associated with plant operations such as electrical control panels, circuits and breaker panels.
Must be a reliable/trustworthy team player.
Maintain a good attendance and safety record.
Be willing to work long hours associated with this position.
Ability to work weekends and some nights.
Tasks Essential to Job Functions:
Occasional standing, walking, climbing, and working at heights required.
Ability to work long periods of time while sitting, walking, climbing, and performing maintenance duties. Have a working knowledge of electrical components and hazard detection and prevention.
Ability to manage everyday operation and instruct of safety sensitive issues.
Must be able to complete all required paperwork which may require the use of a calculator or computer and have a knowledge of all computer programs associated with the asphalt plant.
What We Offer:
Choice of Health Insurance options (BCBSNC)
Dental
Vision
Short Term Disability Insurance
Long Term Disability Insurance
Life Insurance
Paid Time Off
Holiday Pay
Weather Related Pay
401(k) and Profit Sharing
CareOne (EAP)
Corporate Chaplains of America
Barnhill Contracting Company is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
Auto-ApplySwiss Machine Operators - All shifts
Operator job in Leland, NC
Full-time Description
GCM is a global contract manufacturing company with locations in the Silicon Valley, Chicago, North Carolina and China, servicing MedTech, Aerospace, and industrial end-market applications. At GCM, we believe our most valuable assets are our awesome employees, who are the heart and soul of our company.
Why GCM? You will work with a great team of people, in a fun and collaborative environment, with room for advancement.
We are looking for experienced and talented Swiss Machine Operators to support 1st, 2nd and Weekend Shifts in our Leland, NC, location!
SUMMARY
The CNC Machinist II is responsible for the machining of products to meet customer specifications. Operation of the machining centers and medium to complex setups would be done by selecting and installing tooling, updating fixturing, and pulling CNC Lathe machining programs.
CORE / LEADERSHIP
Self-management - knowledge of what to do and how to act in different situations.
Interact with organizational team members and other departments in a professional manner.??
Being receptive to new ideas and different opinions.
Quick Learner
Problem-solving
Adaptability
Teamwork
Good communication skills
Must be able to take verbal and written instructions and work from handmade sketches.
JOB
Must be familiar with the machine controls and be able to perform setups of medium complexity.
Load parts (Ability to load and run parts per Manufacturing plan or Product Specifications)
Monitor tooling wear and changing tools as required per tool life monitoring.
Inspect parts with mechanical gauges (calipers, mics, height gauges, pins, etc.)
Perform setups on production parts (non-CFA, FA or SCR jobs)
Perform tool and offset changes during setup in-order to submit a passing internal first article to QA
Responsible for utilizing shop paper procedure including updates, signatures, and stamps, counting quantities, labeling and non-conformance related activities
Able to read all and understand all blueprint call outs.
Advanced knowledge of GD&T - Understand relationship to Print, Program and Set up to achieve GD&T call outs.
Meet job standard times consistently. Communicate to lead or supervisor when jobs are over or under called out standards.
Deburr work in process.
Promote the company initiative of Lean Manufacturing/Continuous Improvement projects and 5S implementation and sustainment.
Clock in and off operations according to sequence number of the work order.
Requirements
EDUCATION AND/OR EXPERIENCE REQUIRED
Four years' experience either in a production or job shop environment.
Familiarity with Manufacturing Scheduling and Shop Control planning system such as Epicor is a plus.
Must be very well versed in four and five axis machining.
Experience performing setup and operating Swiss Star equipment
PHYSICAL DEMANDS WHILE PERFORMING THE JOB
Visual acuity: near acuity and accommodation are required for reading machine dial gauges, blueprints, and precision measuring instruments used in the inspection of parts
Hearing ability: ability to monitor machine sounds to identify and diagnose changes to take appropriate action
Frequently required to stand, walk, push, reach overhead, and bend to the floor
Frequently required to sit and use hands to finger, handle, or feel objects, tools, or controls
Occasionally lift and/or move up to 50 pounds
WORKING ENVIRONMENT OF THE JOB
High noise levels from operating machines
Physical hazards from moving equipment and machine parts
Breathing fumes, dust, and mist
Skin exposure to oils and cutting fluids
SAFETY
Comply with applicable environmental, health and safety laws and regulations, Company policy and accepted safe work practices
Knowledge of Shop safety practices and use of PPE
Equipment Operator II - Ivanhoe
Operator job in Ivanhoe, NC
Reports To: Lee Langston Seeking an individual to perform various duties at an aggregate plant facility including equipment operation, welding, and other plant-related tasks. Must be dedicated, willing to learn and wanting to build a career while achieving the highest level of safety standards.
Benefits
* Recession Resistant Industry
* Consistent work, with a work/life balance
* Overtime Opportunities
* Paid Holidays
* Paid Time Off
* 401(k) Plan w/ employer match contribution
* Medical / Dental / Vision offered the first of the month following start date
* Life Insurance - Company Paid
* Short-term / Long-term Disability Insurance - Company Paid
How to Get Started
* STEP ONE: Complete our online application (linked here)
* STEP TWO: Be prepared to speak with one of our Recruiters, as they'll be reaching out to you soon.
* STEP THREE: Keep an eye on your texts and emails, we'll use this to send you additional details, questions, and information pertaining to our hiring interview and selection process.
Get Hired: What to Expect During our Hiring Process
* Background Check
* Motor Vehicle Record Check
* DOT 5-Panel Drug Screen
* Fit for Duty Baseline Physical
* Paid Orientation
* A great team to support you throughout your career with Summit Materials companies!
Roles & Responsibilities
* Operate equipment to assist with the daily production and operations of the plant
* Assist plant supervisor with the daily operations and upkeep of the plant.
* Ability to inspect all areas of the plant to perform belt repairs, screen changes, bearing replacements and other necessary maintenance.
* Perform welding and fabrication duties as needed.
* Detect safety hazards and equipment malfunctions and respond accordingly. Ability to follow directions.
* Must be able to work evenings and weekends when necessary.
* Strict adherence to safety requirements and procedures as outlined in MSHA policies and procedures manual, and OSHA guidelines.
* Perform other job duties as assigned.
Ability, Skills & Knowledge
* Proficiency in operating a diverse range of large aggregate heavy machinery, including excavators, bulldozers, and loaders.
* Knowledge of welding and general mechanics preferred.
* Ability to adapt to evolving project requirements, operational strategies, and safety regulations, ensuring compliance with industry standards.
* Deep understanding of MSHA Regulation.
* High school education or GED equivalent.
Req #: 2246
Heavy Equipment Operator - Winston-Salem, NC
Operator job in Wilmington, NC
Job Description
Caton Construction Group, one of the Caton Companies, corporate offices in Troy, VA, and Cary, NC, is growing! Currently seeking Equipment Operators for our bridge/roadway project in Winston-Salem, NC.
THIS JOB POSTING IS FOR OUR PROJECT IN WINSTON-SALEM, NC.
STARTING PAY is competitive and based on skills and experience.
The heavy equipment operator operates a variety of contractor equipment and properly maintains the equipment on a daily basis.
Responsibilities
• Works with and assists in moving and grading dirt, digging ditches and trenches, hoisting material, tools, equipment, and any related work with a bulldozer, backhoe, road grader or front-end loader.
• Performs routine inspection and preventive maintenance on assigned equipment and refers defects or repairs to the supervisor.
• Performs all duties in conformance to appropriate safety and security standards.
Supervisory Responsibility
This position has no supervisory responsibilities.
Position Type and Expected Hours of Work
This is a full-time position. Normal days and hours of work are Monday - Friday, 7:00 a.m. - 3:30 p.m. with time provided for lunch, hours may vary. Work may be local or out of town in which case overnight stays are required. This position frequently requires long hours and weekend work.
Travel/ Driving
Travel is primarily local during the business day, although some out-of-area and overnight travel may be expected.
Driver's license is required.
Required Education and Experience
High school diploma or equivalent.
Four years' experience involving the use of medium and heavy equipment.
Preferred Education and Experience
Valid CDL License.
Position Type and Expected Hours of Work
This is a full-time position. Normal work hours are Monday through Friday - overtime expected - 7:00 a.m. - 3:30 p.m. , with time provided for lunch, hours may vary. Work may be local or out of town in which case overnight stays are required.
Company Benefits
• Competitive Compensation Package
• Comprehensive Health, Vision and Dental Insurance
• FSA Program
• 401K Program with 4% company match
• 8 Paid Holidays plus personal floating holiday
• 80 hours of accrued Paid time Off (PTO) the first year
And more…
Why you should apply:
Excellent working environment
Working for a company that cares about your success
Working for a growing company
Employment is conditional on satisfactorily completing all pre-employment requirements including background and drug screen. Starting wages depend skills and experience.
Equal Opportunity Employer - Minorities and females are encouraged to apply.
Dock Operations Staff
Operator job in Carolina Beach, NC
Job Description
DOCK OPERATIONS STAFF JOB ANNOUNCEMENT:
Freedom Boat Club of Wilmington provides a hassle-free boating experience to their members, allowing them to enjoy more time on the water and less time worrying about traditional boat ownership responsibilities like cleaning, storage, and maintenance.
Role Description:
This is a part-time or full-time, on-site role located in Carolina Beach, NC. The Dock Operations Staff will be responsible for working with other staff members to clean, maintain, and prepare boats for daily use by members. This role also involves assisting members with boarding and departing boats safely, fueling boats up as needed, and monitoring conditions at the docks for safety hazards.
DUTIES INCLUDE BUT ARE NOT LIMITED TO:
Greet members in a friendly, upbeat, courteous and professional manner
Drive boats between storage slips and fuel dock
Assist members in boarding / un-boarding boats with emphasis on safety
Check-in and Check-out members using a handheld computer tablet
Perform check of equipment on board (Life vests, Anchor, Dock Lines, etc.)
Check-in members returning with boats and receive fuel payment on handheld tablet
Familiarize yourself with local waters to provide basic chart guidance to members
Fuel boats at marina fuel dock
Clean boats and stage equipment for the next member outings
Deep clean boats as scheduled
Assist members with docking boats
Weekend/Holiday shifts required
QUALIFICATIONS:
Must be at least 16 years of age
Physical ability to lift / carry up to 50lbs
Physical ability to board and un-board boats dozens of times per day
Physical ability to clean boats regularly using handle mounted brush
Frequent kneeling / stooping to clean interior of boat compartments
Ability to maintain a calm, positive attitude during periods of high activity
Highly effective communication skills and friendly customer service is a must
High attention to detail
Maintain safe and clean work area
Adhere to all safety policies
Maintain a positive attitude toward the dock and the jobs being performed
Must pass a background check and drug screening
Authorized to work in the United States
Core Focus
At Freedom Boat Club of Wilmington our core focus is:
Creating lifelong memories through hassle-free boating.
Core Values
The foundational values of Freedom Boat Club of Wilmington are embedded in the structure of the organization. These represent the minimum expectations established by the organization's founding leadership.
Uncompromising Integrity. While integrity is woven throughout the fabric of each core value, it is the foundation on which our organization has been built. We are unapologetically loyal, dependable, honest, and exercise good judgement and respect in all that we do. It is often through our mistakes that we progress. When we are wrong, we own it and strive to always make it right.
Sparking Joy and Delight. We strive to create unexpected positive feelings associated with the Freedom Boat Club experience by rolling out the red carpet for every member reservation. We capitalize on opportunities to bring joy to our teammates and the docks. Our staff go above and beyond to anticipate the needs and exceed the expectations of our members by removing barriers and facilitating hassle-free boating.
I Have the Helm! We understand that it can be easy to get lost in the multitude of factors that cannot be controlled in boating. At Freedom Boat Club of Wilmington, we are innovative and flexible problem-solvers. Accountability is the backbone of our organization, empowering us to be solution-focused advocates for our team and members.
Carry the Cooler. We tackle the challenging and time-consuming tasks that can prevent our members from getting on the water. Much like a person tasked with carrying the family cooler from the car to the beach, our work can lack glamour. Our tasks can be heavy and may slap us in the knees. Whether we do it alone or with a teammate, we "carry the cooler" so our members can get on the water. Once the job is done, we have fun! An energized and engaged team is our greatest aspiration.
Machine Operator
Operator job in Wilmington, NC
We are seeking a skilled and detail-oriented Machine Operator to join our steel production team. The ideal candidate will be responsible for operating and maintaining machinery used in the production and processing of steel products. This role requires a focus on quality, safety, and efficiency while ensuring that equipment operates correctly and meets production targets.
Key Responsibilities:
Machine Operation:
Set up, operate, and monitor machinery used in steel production (e.g., rolling mills, cutting machines, lathes, CNC machines).
Adjust machine settings to ensure product quality and meet specifications.
Load raw materials into the machine and handle finished products safely.
Maintenance and Troubleshooting:
Perform routine maintenance on machinery to ensure optimal performance.
Identify and troubleshoot mechanical or operational issues and coordinate with the maintenance team for complex repairs.
Keep records of maintenance activities and machine performance.
Quality Control:
Inspect finished products to ensure they meet quality standards and specifications.
Identify defects or inconsistencies and take corrective actions as needed.
Maintain accurate records of production output and quality reports.
Safety Compliance:
Adhere to all safety protocols and procedures to ensure a safe working environment.
Wear appropriate personal protective equipment (PPE) at all times.
Report safety hazards, near misses, or incidents to the supervisor promptly.
Documentation and Reporting:
Maintain detailed logs of production cycles, machine settings, and incidents.
Provide daily reports on production output and equipment performance.
Collaborate with other departments, such as quality assurance and maintenance.
Team Collaboration:
Communicate effectively with team members and supervisors to ensure seamless production operations.
Participate in training sessions to enhance skills and knowledge.
Assist with training new team members as needed.
Qualifications:
Education: High school diploma or equivalent; technical training or certification in machine operation is preferred.
Experience: 2+ years of experience as a machine operator in a steel plant or similar industrial environment.
Technical Skills:
Proficiency in operating and troubleshooting industrial machinery.
Basic understanding of mechanical systems, hydraulics, and pneumatics.
Familiarity with CNC programming and operation is a plus.
Physical Requirements: Ability to stand, lift, and operate machinery for extended periods; capability to handle materials weighing up to [Insert weight].
Key Competencies:
Attention to detail and commitment to quality.
Strong problem-solving skills and mechanical aptitude.
Ability to work independently and as part of a team.
Strong commitment to workplace safety and adherence to protocols.
Work Schedule:
Monday - Friday 5am to 3:30pm
Equal Opportunity Employer Statement:
We are an Equal Employment Opportunity (EEO) Employer. We do not discriminate based on race, color, religion, gender, gender identity, sexual orientation, age, national origin, disability, veteran status, or any other protected characteristic. We are committed to creating an inclusive environment for all employees.
Heavy Equipment Operator- Hampstead
Operator job in Hampstead, NC
At Atomic Transportation, we take pride in being a leading local bulk hauling company with a dedicated fleet of company-owned assets and W2 driver employees that specialize in waste transportation from local transfer stations to landfills. With over nineteen terminals operating locally throughout the Southeast and Midwest, at Atomic Transportation our commitment to professionalism and dedication to safety are at the core of everything we do. If you are looking for a team to grow with, Atomic Transport is hiring in the Hampstead, NC area! we are seeking a candidate that has experience operating an excavator and a backhoe equipment.
What We Can Offer:
Pay starting at: $20-$24 an hour based on experience.
Weekly Pay!
Consistent Schedule.
Paid Holidays, Vacation and orientation.
Schedule:
Monday- Friday
Every Other Saturday
Benefits:
Health, vision, and dental insurance.
Voluntary Group Policies: life insurance short/long-term disability.
401(k) Retirement Plan.
Must pass a pre-employment drug screen.
Must pass a pre-employment background check.
Must have a minimum of 2-3 years experience operating heavy equipment.
Please Call Billy Waters for more information:************
Loader Operator/Combi-Lift
Operator job in Rose Hill, NC
The loader Operator Combi-Lift is to maintain a steady flow of empty coups for the loading crew. Remove the empty coup from the trailer and transport into the chicken house and set down on coup black which is set in place by the loading crew. The operator is required to transport filled coups out of the chicken house and load onto the awaiting trailer.
The loader operator must successfully pass the company's Powered Industrial Truck/Operators exam by a minimum score of 80%. A new operator must be trained by a qualified operator and deemed competent by the trainer before being released to work under minimal supervision.
All safety rules will be followed, and the operator will follow the Crew Supervisor instructions. Must be a team player and get along with others. Attendance is vital and reliable transportation is a must. Shifts start on Sunday and will run thru Thursday night. Occasionally work on weekends.
Loader Operator/Combi-Lift
Operator job in Rose Hill, NC
The loader Operator Combi-Lift is to maintain a steady flow of empty coups for the loading crew. Remove the empty coup from the trailer and transport into the chicken house and set down on coup black which is set in place by the loading crew. The operator is required to transport filled coups out of the chicken house and load onto the awaiting trailer.
The loader operator must successfully pass the company's Powered Industrial Truck/Operators exam by a minimum score of 80%. A new operator must be trained by a qualified operator and deemed competent by the trainer before being released to work under minimal supervision.
All safety rules will be followed, and the operator will follow the Crew Supervisor instructions. Must be a team player and get along with others. Attendance is vital and reliable transportation is a must. Shifts start on Sunday and will run thru Thursday night. Occasionally work on weekends.
Heavy Equipment Operator- CDL A
Operator job in Sandyfield, NC
Heavy Equipment Operator
ABOUT CARROLLWOOD FARMS
Carrollwood Farms is a family-owned farm in Stokes and Rockingham Counties. Our mission is to build a family farm for generations to come, showcase and preserve the best of the region, and use best practices in all that we do.
Position Overview:
Carrollwood Farms is seeking a highly motivated and experienced Heavy Equipment Operator to join our growing Sitework & Grading division. In this crucial role, you'll play a key part in developing our world-class property, operating a variety of equipment to complete large-scale grading and construction projects.
Responsibilities:
Operate a variety of heavy equipment, including skid steers, mini-excavators, off-road trucks, compactors, large excavators, and dozers.
Execute large-scale projects such as pond construction, building pad preparation, and land grading.
Perform precise excavation and hauling of dirt materials.
Install and maintain erosion control measures to safeguard the environment.
Lay pipe according to specifications.
Operate transits for accurate land measurements.
Conduct regular (at least daily) maintenance on assigned equipment.
Perform other duties as assigned by the Sitework & Grading Superintendent or Assistant Superintendent.
Other special projects as assigned.
Qualifications:
Proven ability to operate a wide range of equipment, from skid steers to large excavators and dozers.
Strong understanding of excavation, hauling, grading, and land development principles.
Experience with erosion control methods and practices is a plus.
Valid driver's license required. Class A CDL required
Commitment to safety, a positive attitude, and a strong work ethic.
Excellent communication and interpersonal skills to collaborate effectively with the team.
Ability to work independently, take initiative, and solve problems.
Physical Requirements:
Must be able to perform various physical tasks including bending, lifting, kneeling, and twisting.
Ability to occasionally lift up to 70 lbs.
Must be able to walk, sit, and stand for extended periods.
Ability to work outdoors in all weather conditions, including rain.
SALARY AND BENEFITS
Competitive, DOE.
Health insurance and 401(k) available.
The Carroll Companies is committed to fostering a diverse and inclusive workplace where all individuals are valued and respected. We believe that diversity is a source of strength and innovation, and we are dedicated to providing equal employment opportunities to all qualified candidates without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We encourage applicants from all backgrounds to apply and join us in our mission to create a workplace that reflects the diversity of the world we serve. Together, we strive to build a culture that celebrates uniqueness, embraces differences, and ensures that every employee feels empowered to bring their authentic selves to work. Your talent is what matters most, and we are excited to welcome individuals from all walks of life to contribute their skills and perspectives to our dynamic team.
Auto-ApplyHeavy Equipment Operator- CDL A
Operator job in Sandyfield, NC
Heavy Equipment Operator
ABOUT CARROLLWOOD FARMS
Carrollwood Farms is a family-owned farm in Stokes and Rockingham Counties. Our mission is to build a family farm for generations to come, showcase and preserve the best of the region, and use best practices in all that we do.
Position Overview:
Carrollwood Farms is seeking a highly motivated and experienced Heavy Equipment Operator to join our growing Sitework & Grading division. In this crucial role, you'll play a key part in developing our world-class property, operating a variety of equipment to complete large-scale grading and construction projects.
Responsibilities:
Operate a variety of heavy equipment, including skid steers, mini-excavators, off-road trucks, compactors, large excavators, and dozers.
Execute large-scale projects such as pond construction, building pad preparation, and land grading.
Perform precise excavation and hauling of dirt materials.
Install and maintain erosion control measures to safeguard the environment.
Lay pipe according to specifications.
Operate transits for accurate land measurements.
Conduct regular (at least daily) maintenance on assigned equipment.
Perform other duties as assigned by the Sitework & Grading Superintendent or Assistant Superintendent.
Other special projects as assigned.
Qualifications:
Proven ability to operate a wide range of equipment, from skid steers to large excavators and dozers.
Strong understanding of excavation, hauling, grading, and land development principles.
Experience with erosion control methods and practices is a plus.
Valid driver's license required. Class A CDL required
Commitment to safety, a positive attitude, and a strong work ethic.
Excellent communication and interpersonal skills to collaborate effectively with the team.
Ability to work independently, take initiative, and solve problems.
Physical Requirements:
Must be able to perform various physical tasks including bending, lifting, kneeling, and twisting.
Ability to occasionally lift up to 70 lbs.
Must be able to walk, sit, and stand for extended periods.
Ability to work outdoors in all weather conditions, including rain.
SALARY AND BENEFITS
Competitive, DOE.
Health insurance and 401(k) available.
The Carroll Companies is committed to fostering a diverse and inclusive workplace where all individuals are valued and respected. We believe that diversity is a source of strength and innovation, and we are dedicated to providing equal employment opportunities to all qualified candidates without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We encourage applicants from all backgrounds to apply and join us in our mission to create a workplace that reflects the diversity of the world we serve. Together, we strive to build a culture that celebrates uniqueness, embraces differences, and ensures that every employee feels empowered to bring their authentic selves to work. Your talent is what matters most, and we are excited to welcome individuals from all walks of life to contribute their skills and perspectives to our dynamic team.
Auto-ApplyHeavy Equipment Operator - Dozer
Operator job in Wilmington, NC
POSITIONS AVAILABLE: 2
PRIMARY FUNCTION:
Operate one or several types of power construction equipment including but not limited to motor-graders, bulldozers, rubber tire backhoes or trackhoes, rollers, articulated dump truck drivers, front-end loaders or hydraulic excavators to excavate, move, and grade earth, erect structures, or pour concrete, asphalt, or other hard surface pavement on road beds, parking lots, airport runways and taxiways. May perform minor repairs and maintain equipment in addition to other duties.
ESSENTIAL DUTIES:
Fine Grade-Dozer Operator
Load and move dirt, rocks, equipment, or other materials, using trucks, power cranes, shovels, or related equipment.
Start machine, engage clutch, and push and move levers, switches, and pedals to guide machine along forms or guidelines and to control the operation of machine attachments, such as blades, buckets, scrapers, or swing booms.
Drive and maneuver equipment equipped with blades in successive passes over working areas to remove topsoil, vegetation, or rocks or to distribute and level earth or terrain.
Operate machines to spread, smooth, level, or steel-reinforce stone, concrete, or asphalt on road beds or other job sites as needed.
Operate tamping machines or manually roll surfaces to compact earth fills, foundation forms, and finished road materials, according to grade specifications.
Observe grade in order to adjust machine settings and indicate low spots for workers to add material.
Conduct documented pre-shift inspections of equipment for safety and mechanical defects.
Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year.
Align machines, cutter heads, or depth gauge makers with reference stakes and guidelines or ground or position equipment, following hand signals of other workers.
Coordinate machine actions with other activities, positioning or moving loads in response to hand or audio signals from crew members.
Inspect, clean, maintain, and repair equipment, using mechanics' hand tools. Conduct pre-shift inspections and report any concerns or malfunctions to supervisors.
Learn and follow safety regulations.
Take actions to avoid potential hazards or obstructions, such as utility lines, other equipment, other workers, or falling objects.
Perform necessary work while complying with all company policies and procedures.
Perform additional duties as required or directed by their immediate supervisor or other manager.
MINIMUM REQUIREMENTS:
Education:
Must be a minimum of 18 years old.
Work Experience:
Candidate must have experience operating a bulldozer to fine grade.
Experience on multiple types of heavy equipment a plus.
Must have good work ethic and be dependable.
Must be able to work various hours as needed.
Must be willing to work out of town if needed.
Able to operate Dozer with or without GPS.
Heavy Physical Demands:
Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required.
Physical Activity:
Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions.
The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time.
EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.
Plant Loader Operator (Castle Hayne,NC/Kenansville,NC)
Operator job in Wilmington, NC
Barnhill Contracting Company's success is built on the values, principles and vision of the man - Robert E. Barnhill, Sr. - whose name we proudly bear. Robert Barnhill built this company on a foundational belief that there is power in people. He was a motivator. A hard worker. A leader of leaders. His passion for people and his firm belief in the Golden Rule - treating others as you want to be treated - still drive us today. We are firm, flexible and honest. We do the right thing, every single time. We empower our leaders in the field to be decision makers. We are easy to work with - a core philosophy that is both intentional and deliberate. One that requires discipline. Grit. All of these qualities, along with our founder's vision, have helped grow Barnhill Contracting Company into one of the Southeast's leading contractors.
Our success is built from the dedicated service of each and every one of our employees. Construction is hard work - long hours and immense pressure to meet critical deadlines - and we are proud to employ the most talented group of people in the industry. When you join the Barnhill team, you become part of the Barnhill Family.
Job Description:
Loader Operator will operate various types of front-end loaders such as but not limited Caterpillar or Kawasaki. May be working on multiple sites as the need arises.
Job Duties & Responsibilities:
Operates rubber tired or crawler type tractor with attached scoop type bucket on front end.
Excavates and loads excavated materials, loads materials from stockpiles, charges batch plants, and loads trucks.
May oil, grease, service, and make normal operating adjustments to equipment.
May perform other related duties such as backfilling trenches/excavations.
May require occasional lifting up to 50 pounds.
Job requires the following motions: climbing, stretching, driving/steering, sitting, twisting, vibration, riding on rough terrain.
Uses hand tools such as wrenches and screwdrivers.
May be exposed to extremes of heat and cold weather.
Overtime work may be required.
Requires riding to job sites.
The job duties described herein are not exhaustive and may be supplemented.
Minimum Qualifications & Training:
One to two years of front-end loader operations. May train the right candidate.
Ability to abide by precise instructions and strict buy necessary safety rules and policies.
Must be a reliable/trustworthy team player.
Maintain a good attendance and safety record.
Tasks Essential to Job Functions:
Occasional standing and walking required.
Ability to work long periods of time while sitting.
Ability to operate equipment at recommended speeds and peaks of operation.
Must be productive during each shift and be willing to meet the goals that are set.
Visual Activity - ability to work with equipment technology.
What We Offer:
Choice of Health Insurance options (BCBSNC)
Dental
Vision
Short Term Disability Insurance
Long Term Disability Insurance
Life Insurance
Paid Time Off
Holiday Pay
Weather Related Pay
401(k) and Profit Sharing
CareOne (EAP)
Corporate Chaplains of America
Barnhill Contracting Company is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
Auto-ApplyFront End Loader Operator
Operator job in Oak Island, NC
At Atomic Transport, we take pride in being a leading local bulk hauling company based out of Chattanooga, TN with a dedicated fleet of company-owned assets and W2 drivers. Specializing in waste transportation from local transfer stations to landfills, we operate over 25 terminals across the Southeast, Midwest and the Westcoast. We are growing and looking for passionate individuals to grow with us. We are currently seeking an experienced Front-End Loader Operator to join our team. If you're looking for stability, competitive pay, and a chance to grow with a trusted name in the industry this is your opportunity.
What We Offer:
Pay: $20-25/hour, based on experience
Weekly pay with time and a half for overtime
Regular schedule: Monday-Friday, plus Saturdays as needed
Paid holidays, vacation time, and orientation
Long-term, stable employment with career advancement potential
Responsibilities:
Conduct pre- and post-operation inspections of equipment in accordance with Company policy, ensuring windows, lights, mirrors, and rear-view cameras are clean and fully operational.
Safely and efficiently operate equipment, including excavators, front-end loaders, and other machinery, adhering to proper safety standards.
Continuously monitor waste for evidence of unacceptable materials and take appropriate action.
Regularly assess equipment condition to ensure operational readiness, minimizing downtime; clean tracks or wheels as needed.
Perform and document minor maintenance on equipment; refer complex mechanical issues to the Maintenance Shop for repair.
Complete Equipment Condition Reports and other required documentation; promptly report necessary repairs to the supervisor.
Perform daily radiator cleaning and greasing of equipment to maintain optimal performance.
Ensure all equipment is properly cleaned, serviced, and stored at the end of each shift.
Follow all Company safety policies and procedures.
Perform additional job-related duties as assigned.
Benefits:
401(k) with company match
Health, dental, and vision insurance
Health savings account (HSA)
Life and disability insurance
Paid referral program
Employee discounts
Valid driver's license
Mus have experience operating a front-end loader (Volvo L150, Volvo 300 Excavator or similar equipment) forklift does not count.
Consistent work history and reliability
Must pass a pre-employment drug screen
Must pass a pre-employment background check
Dock Operations Staff
Operator job in Holly Ridge, NC
Job Description
DOCK OPERATIONS STAFF JOB ANNOUNCEMENT:
Freedom Boat Club of Wilmington provides a hassle-free boating experience to their members, allowing them to enjoy more time on the water and less time worrying about traditional boat ownership responsibilities like cleaning, storage, and maintenance.
Role Description:
This is a part-time or full-time, on-site role located in Surf City, NC. The Dock Operations Staff will be responsible for working with other staff members to clean, maintain, and prepare boats for daily use by members. This role also involves assisting members with boarding and departing boats safely, fueling boats up as needed, and monitoring conditions at the docks for safety hazards.
DUTIES INCLUDE BUT ARE NOT LIMITED TO:
Greet members in a friendly, upbeat, courteous and professional manner
Drive boats between storage slips and fuel dock
Assist members in boarding / un-boarding boats with emphasis on safety
Check-in and Check-out members using a handheld computer tablet
Perform check of equipment on board (Life vests, Anchor, Dock Lines, etc.)
Check-in members returning with boats and receive fuel payment on handheld tablet
Familiarize yourself with local waters to provide basic chart guidance to members
Fuel boats at marina fuel dock
Clean boats and stage equipment for the next member outings
Deep clean boats as scheduled
Assist members with docking boats
Weekend/Holiday shifts required
QUALIFICATIONS:
Must be at least 16 years of age
Physical ability to lift / carry up to 50lbs
Physical ability to board and un-board boats dozens of times per day
Physical ability to clean boats regularly using handle mounted brush
Frequent kneeling / stooping to clean interior of boat compartments
Ability to maintain a calm, positive attitude during periods of high activity
Highly effective communication skills and friendly customer service is a must
High attention to detail
Maintain safe and clean work area
Adhere to all safety policies
Maintain a positive attitude toward the dock and the jobs being performed
Must pass a background check and drug screening
Authorized to work in the United States
Core Focus
At Freedom Boat Club of Wilmington our core focus is:
Creating lifelong memories through hassle-free boating.
Core Values
The foundational values of Freedom Boat Club of Wilmington are embedded in the structure of the organization. These represent the minimum expectations established by the organization's founding leadership.
Uncompromising Integrity. While integrity is woven throughout the fabric of each core value, it is the foundation on which our organization has been built. We are unapologetically loyal, dependable, honest, and exercise good judgement and respect in all that we do. It is often through our mistakes that we progress. When we are wrong, we own it and strive to always make it right.
Sparking Joy and Delight. We strive to create unexpected positive feelings associated with the Freedom Boat Club experience by rolling out the red carpet for every member reservation. We capitalize on opportunities to bring joy to our teammates and the docks. Our staff go above and beyond to anticipate the needs and exceed the expectations of our members by removing barriers and facilitating hassle-free boating.
I Have the Helm! We understand that it can be easy to get lost in the multitude of factors that cannot be controlled in boating. At Freedom Boat Club of Wilmington, we are innovative and flexible problem-solvers. Accountability is the backbone of our organization, empowering us to be solution-focused advocates for our team and members.
Carry the Cooler. We tackle the challenging and time-consuming tasks that can prevent our members from getting on the water. Much like a person tasked with carrying the family cooler from the car to the beach, our work can lack glamour. Our tasks can be heavy and may slap us in the knees. Whether we do it alone or with a teammate, we "carry the cooler" so our members can get on the water. Once the job is done, we have fun! An energized and engaged team is our greatest aspiration.
Heavy Equipment Operator- CDL A
Operator job in Sandyfield, NC
Job Description
Heavy Equipment Operator
ABOUT CARROLLWOOD FARMS
Carrollwood Farms is a family-owned farm in Stokes and Rockingham Counties. Our mission is to build a family farm for generations to come, showcase and preserve the best of the region, and use best practices in all that we do.
Position Overview:
Carrollwood Farms is seeking a highly motivated and experienced Heavy Equipment Operator to join our growing Sitework & Grading division. In this crucial role, you'll play a key part in developing our world-class property, operating a variety of equipment to complete large-scale grading and construction projects.
Responsibilities:
Operate a variety of heavy equipment, including skid steers, mini-excavators, off-road trucks, compactors, large excavators, and dozers.
Execute large-scale projects such as pond construction, building pad preparation, and land grading.
Perform precise excavation and hauling of dirt materials.
Install and maintain erosion control measures to safeguard the environment.
Lay pipe according to specifications.
Operate transits for accurate land measurements.
Conduct regular (at least daily) maintenance on assigned equipment.
Perform other duties as assigned by the Sitework & Grading Superintendent or Assistant Superintendent.
Other special projects as assigned.
Qualifications:
Proven ability to operate a wide range of equipment, from skid steers to large excavators and dozers.
Strong understanding of excavation, hauling, grading, and land development principles.
Experience with erosion control methods and practices is a plus.
Valid driver's license required. Class A CDL required
Commitment to safety, a positive attitude, and a strong work ethic.
Excellent communication and interpersonal skills to collaborate effectively with the team.
Ability to work independently, take initiative, and solve problems.
Physical Requirements:
Must be able to perform various physical tasks including bending, lifting, kneeling, and twisting.
Ability to occasionally lift up to 70 lbs.
Must be able to walk, sit, and stand for extended periods.
Ability to work outdoors in all weather conditions, including rain.
SALARY AND BENEFITS
Competitive, DOE.
Health insurance and 401(k) available.
The Carroll Companies is committed to fostering a diverse and inclusive workplace where all individuals are valued and respected. We believe that diversity is a source of strength and innovation, and we are dedicated to providing equal employment opportunities to all qualified candidates without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We encourage applicants from all backgrounds to apply and join us in our mission to create a workplace that reflects the diversity of the world we serve. Together, we strive to build a culture that celebrates uniqueness, embraces differences, and ensures that every employee feels empowered to bring their authentic selves to work. Your talent is what matters most, and we are excited to welcome individuals from all walks of life to contribute their skills and perspectives to our dynamic team.
Loader Operator
Operator job in Sneads Ferry, NC
AVAILABLE POSITIONS: 1
PRIMARY FUNCTION:
Perform general tasks involving physical labor as well as operating the loader and Bobcat at pits and/or plants. May operate hand and power tools of all types: Air hammers, small mechanical hoists, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces for support, cleaning up rubble and debris and keeping plant yard clean at all times.
ESSENTIAL DUTIES:
Loader Operator
Operate loader as needed for moving and loading materials at pits or on plant yard. May also be required to use jackhammers, drills and other power tools.
Position, join, align, and seal structural components.
Shovel materials.
Signal equipment operators to facilitate alignment, movement, and adjustment of machinery, equipment, and materials.
Spray materials such as water, sand, steam, or paint through hoses to clean, coat, or seal surfaces.
Tend all machines used in the day to day operations.
Tend pumps, compressors, and generators to provide power for tools, machinery, and equipment, or to heat and move materials.
Lubricate, clean, and repair machinery, equipment, and tools.
Apply caulking compounds by hand or using caulking guns.
Clean and prepare sites to eliminate possible hazards.
Control traffic passing near, in, and around work area.
Erect and disassemble scaffolding, shoring, braces, ramps, and other temporary structures.
Load, unload building materials, machinery, and tools.
Mix ingredients to create compounds for covering or cleaning surfaces.
Learn and follow safety regulations.
Work long, flexible hours as demanded by our customers including nights, weekends, and work outside for extended periods during all seasons of the year.
Perform additional duties as required or directed by their immediate supervisor or other manager.
Must have regular and predictable attendance.
MINIMUM REQUIREMENTS:
Education:
Must be a minimum of 18 years old.
Work Experience:
Good work ethic.
Experience operating loader preferred.
MSHA certified a plus.
Other:
Candidate will need to have dependable transportation.
Punctual, dependable and self motivated.
Willing to work overtime and weekends.
Valid NC driver license.
Heavy Physical Demands:
Heavy physical effort required including pulling and lifting or moving heavy weight material with frequent lifting or moving materials or equipment (over 80 pounds). If a position specific Physical Demands sheet is attached, it will describe in more detail the physical demands that are required.
Physical Activity:
Position requires the ability to continuously work around any or all of the following: noise, dust, heat, cold, oil and heavy equipment. Personal protective equipment is normally required of the position. Position requires ability to exchange ideas quickly and clearly and the ability to receive and evaluate detailed information and instructions.
The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time. EOE. Minorities/Women/Protected Veterans/Individuals with Disabilities.