Maintenance Technician jobs at OpSource

OpSource has partnered with a full-service fabrication and machining company located in Anderson, SC. This is a Direct Hire position so you will work straight for the company. Senior Maintenance Technician $28/hr Shift for the position: 6am-2:30pm Monday-Friday (mandatory OT when needed) POSITION SUMMARY: The Maintenance Technician Sr's primary objective is to perform preventative maintenance and repair work on various machinery and mobile equipment used for material handling, metal fabrication and assembly of road construction equipment and trailers. This person is responsible for completing work orders in a timely manner to optimize machine availability and uptime as well as performing general facilities maintenance work. Senior Maintenance Technicians are expected to have masterly level skills at troubleshooting a broad range of equipment and make significant contributions to preventative maintenance solutions and the apprenticeship program. MAJOR DUTIES: • Perform preventive maintenance and repair work on various machinery and mobile equipment included but not limited to lasers, burn tables, presses, air compressors, CNCs, rigging equipment, fork trucks and manlifts • Evaluate equipment failures and unplanned downtime to improve preventative maintenance • Aid in the development of new routine maintenance tasks in promoting a proactive culture • Monitor and complete work orders in a timely manner • Uphold highest safety standards, reinforce tag out of unsafe equipment/areas, and ensure safety devices are properly secure while performing maintenance work and after work is completed • Perform general facilities maintenance included but not limited to garage doors, plumbing, HVAC and carpentry work • Actively train and mentor teammates enrolled in the Maintenance Apprenticeship Program • Promote Etnyres 5S CANDO program by maintaining clean and orderly work area • Perform other duties as assigned QUALIFICATIONS & PHYSICAL REQUIREMENTS: High School Diploma required; additional technical certification in multi-craft maintenance (or similar) preferred. Minimum 5 years experience as a Maintenance Mechanic/Technician in a manufacturing setting required to include experience with 3 phase power / 480v and low voltage circuits; PLC troubleshooting a plus. Strong communication skills, teamwork, and service mindset are essential as well as being self-driven with the ability to work autonomously with limited direction. ADDITIONAL COMMENTS: All work will be done in a timely manner within established quality standards and consistent with Company policies, priorities and needs. The individual holding this position has a broad responsibility for carrying out the objectives of the Company including supporting all company policies, meeting goals, and working as a contributing team member. Performance will be measured on the function/duties described in the position description, accomplishments during the review period, and the methods/work skills used to achieve the goals.

Classification: Non-Exempt We are Alsco Uniforms. We've been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It's our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We're seeking driven professionals with ambition to grow within our company. We'd love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Worker is responsible for regular preventative maintenance of large industrial textile processing equipment, as well as facility maintenance. Assists the Maintenance Technician and/or Chief Engineer as required. This position reports to the Chief Engineer. Hourly Base Pay: $22-$26 Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Benefits may vary for positions covered by a collective bargaining agreement. Essential Functions: - Performs basic maintenance duties, including monitoring oil levels and performing regular preventative maintenance of grease fittings, lint traps, shaker screen barrels, limited electrical troubleshooting. - Relies on instructions and pre-established guidelines to perform the functions of the job. - Relies on limited experience and judgment to plan and accomplish goals. - A certain degree of creativity and latitude is required. - Assists in problem resolution in an effort to minimize equipment downtime. - Looks for opportunities to continually improve maintenance processes - Works with all plant personnel in a cooperative and professional manner. - Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry. - Ensures work is performed safely and efficiently. - Follows written and verbal instructions and performs other tasks as directed by supervision. - Complies with all Federal, State and local laws. Additional Functions: - May work with and support other branch personnel as required by supervision. - Drive and pick up parts, transport equipment, parts, etc. Qualifications: - Have and maintain a valid driver's license and driving record free of chargeable accidents, speeding or other safety violations. - Demonstrate adequate mechanical aptitude. - Proficient in the proper use of power and hand tools. - Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management and team member skills. - Must be a team player with enthusiasm, initiative, and pride in work well done; self-starter dedicated to continual quality improvement. Education: - High school graduate or equivalency preferred. Typical Physical Activity: - Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: - Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: - Occasionally, such as to procure parts. The Maintenance Worker must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022

Classification: Non-Exempt We are Alsco Uniforms. We've been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It's our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We're seeking driven professionals with ambition to grow within our company. We'd love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Worker is responsible for regular preventative maintenance of large industrial textile processing equipment, as well as facility maintenance. Assists the Maintenance Technician and/or Chief Engineer as required. This position reports to the Chief Engineer. Hourly Base Pay: $22-$26 Our full-time employees enjoy: * 401K Plan with Company Match * Medical, Dental, Vision, FSA/HSA * Life Insurance, Disability Insurance * Vacation, Sick Time, Holidays * Choice of Global Cash Card or Direct Deposit * Career Advancement * Learning & Development Opportunities * Inclusive and Diverse Team Environment Benefits may vary for positions covered by a collective bargaining agreement. Essential Functions: * Performs basic maintenance duties, including monitoring oil levels and performing regular preventative maintenance of grease fittings, lint traps, shaker screen barrels, limited electrical troubleshooting. * Relies on instructions and pre-established guidelines to perform the functions of the job. * Relies on limited experience and judgment to plan and accomplish goals. * A certain degree of creativity and latitude is required. * Assists in problem resolution in an effort to minimize equipment downtime. * Looks for opportunities to continually improve maintenance processes * Works with all plant personnel in a cooperative and professional manner. * Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry. * Ensures work is performed safely and efficiently. * Follows written and verbal instructions and performs other tasks as directed by supervision. * Complies with all Federal, State and local laws. Additional Functions: * May work with and support other branch personnel as required by supervision. * Drive and pick up parts, transport equipment, parts, etc. Qualifications: * Have and maintain a valid driver's license and driving record free of chargeable accidents, speeding or other safety violations. * Demonstrate adequate mechanical aptitude. * Proficient in the proper use of power and hand tools. * Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management and team member skills. * Must be a team player with enthusiasm, initiative, and pride in work well done; self-starter dedicated to continual quality improvement. Education: * High school graduate or equivalency preferred. Typical Physical Activity: * Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: * Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: * Occasionally, such as to procure parts. The Maintenance Worker must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022

Job Description Classification: Non-Exempt We are Alsco Uniforms. We've been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It's our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We're seeking driven professionals with ambition to grow within our company. We'd love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Worker is responsible for regular preventative maintenance of large industrial textile processing equipment, as well as facility maintenance. Assists the Maintenance Technician and/or Chief Engineer as required. This position reports to the Chief Engineer. Hourly Base Pay: $22-$26 Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Benefits may vary for positions covered by a collective bargaining agreement. Essential Functions: - Performs basic maintenance duties, including monitoring oil levels and performing regular preventative maintenance of grease fittings, lint traps, shaker screen barrels, limited electrical troubleshooting. - Relies on instructions and pre-established guidelines to perform the functions of the job. - Relies on limited experience and judgment to plan and accomplish goals. - A certain degree of creativity and latitude is required. - Assists in problem resolution in an effort to minimize equipment downtime. - Looks for opportunities to continually improve maintenance processes - Works with all plant personnel in a cooperative and professional manner. - Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry. - Ensures work is performed safely and efficiently. - Follows written and verbal instructions and performs other tasks as directed by supervision. - Complies with all Federal, State and local laws. Additional Functions: - May work with and support other branch personnel as required by supervision. - Drive and pick up parts, transport equipment, parts, etc. Qualifications: - Have and maintain a valid driver's license and driving record free of chargeable accidents, speeding or other safety violations. - Demonstrate adequate mechanical aptitude. - Proficient in the proper use of power and hand tools. - Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management and team member skills. - Must be a team player with enthusiasm, initiative, and pride in work well done; self-starter dedicated to continual quality improvement. Education: - High school graduate or equivalency preferred. Typical Physical Activity: - Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: - Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: - Occasionally, such as to procure parts. The Maintenance Worker must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022

Our Opportunity: Chewy is seeking a highly skilled Maintenance Technician I to join our diverse team at the Salisbury, NC Fulfillment Center. In this role, you will apply your expertise to maintain, solve, and optimize the operations of our innovative fulfillment center. This is an outstanding opportunity to improve your skills in the fast-evolving e-commerce industry while playing a meaningful role in ensuring our facility operates at peak efficiency. Join us and make a direct impact on the performance and success of our fulfillment operations! As a Maintenance Technician, you will be a key player in keeping our large-scale fulfillment center operating at peak performance. Your role will involve performing a diverse range of maintenance, facilities management, and utilities tasks to ensure seamless operations, minimize downtime, and uphold safety and efficiency standards. With your expertise, you'll help maintain a well-functioning environment that supports efficiency and operational excellence. What You'll Do: Perform Maintenance and Repairs: Carry out maintenance, repair, housekeeping, plumbing, metal fabrication, and carpentry to support the high-speed operations of our fulfillment center. Ensure Equipment Functionality: Monitor and ensure that all fulfillment center equipment is running efficiently and that the work environment remains safe for all Team Members. Implement Maintenance Tasks: Complete scheduled and ad-hoc maintenance tasks throughout the facility efficiently and effectively. Inspect Systems: Conduct daily inspections of conveyor systems, shipping, and packing equipment areas to identify and address potential issues. Handle Equipment Accountability: Coordinate the maintenance and accountability of assigned equipment and gear, seeking for zero loss, damage, and defects. Apply CMMS: Use the Computerized Maintenance Management System (CMMS) to supervise labor utilization and handle parts inventory. Tackle Issues: Diagnose and resolve mechanical and electrical problems by visually inspecting, testing, and evaluating components, equipment, and circuits. Follow Procedures: Enforce company procedures and protocols to ensure consistent and reliable operations. What You'll Need: Experience: A minimum of 36 months in facility maintenance, with background in mechanics, construction, engineering, aviation, or transportation repair. Electrical Skills: Proficiency or a proven understanding of electrical systems. Tool Proficiency: Experience using maintenance tools and equipment effectively. Physical Stamina: Ability to lift up to 75 pounds and frequently stand, walk, bend, stoop, twist, and turn. Manual dexterity and good balance are critical for working at ground level and at elevations up to 35 feet. Technical Interest: Strong curiosity about math, electricity, shop mechanics, electric motors, and appliances. Exposure Awareness: Knowledge of potential exposure to high voltage, welding equipment, and various lubricants and solvents. Flexible Schedule: Willingness to work nights, weekends, and/or a floating schedule. Fire Systems Experience: Familiarity with fire systems and fire alarm electronic devices. Technical Reading: Ability to read, understand, and interpret electrical, pneumatic, and plumbing schematics Mechanical Systems Knowledge: Experience with conveyor systems (belts, drives, tracking valves) and VFD motor controllers, motor starters, and control cabinets. PLC Skills: Basic knowledge of PLCs, including input/output solving and some programming. HVAC Experience: Understanding or experience with HVAC systems. Communication and Decision-Making: Ability to communicate preventative maintenance and repair needs, bring up issues outside normal hours, and make sound decisions under pressure. Proactive Maintenance: Skill in identifying and addressing potential issues before they lead to equipment breakdown. Chewy is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, national origin, gender, citizenship, marital status, religion, age, disability, gender identity, results of genetic testing, veteran status, as well as any other legally-protected characteristic. If you have a disability under the Americans with Disabilities Act or similar law, and you need an accommodation during the application process or to perform these job requirements, or if you need a religious accommodation, please contact **************. To access Chewy's Customer Privacy Policy, please click here. To access Chewy's California CPRA Job Applicant Privacy Policy, please click here.

At Kofile , we believe that government has infinite potential to do good and that all information residing within local governments should be preserved, digitized, and made available to all their employees and citizens. We partner with government agencies nationwide to help them meet their citizens' needs by preserving the integrity and content of paper documents to ensure they will be available for use forever and modernizing information management through digitization and access systems Job Description The Intake Technician - Production is responsible for overseeing the execution of each project intake, ERP: NetSuite assessments, product ordering, in addition to supporting day-to-day lab operations. Works alongside team members contributing to workflow in order to meet production goals. The Intake Technician plays an intricate role for the overall success of the production teams. The Intake Technician receives our client's historical documents, performs, or leads a detailed review of documents received, and inputs data about each item into Microsoft Excel & SharePoint. Information is then added to Kofile's ERP: NetSuite, for each project before the project teams process the client's documents. The Intake Technician helps to resolve problems or bottlenecks in production processes by supporting the Intake Supervisor as needed. Supports continuous improvement goals in safety, quality, cost, and customer service. Responsible for managing and owning instrumental functions of the business while creating an engaged and collaborative work force. Responsibilities and Duties ● Handles manually inputting important project details directly into an electronic format, creating spreadsheets with large amounts of information. ● Ability to use constructed data spreadsheets to order products from vendors. ● Supports lab workflow as detailed by the Intake Supervisor ● Develops cross-functional relationships with other departments, as well as with customers ● Maintain a culture of Safety including leading by example ● Complies with data integrity and client security policies ● Implement operational policies and procedures ● Help promote a company culture that encourages top performance and high morale ● Provide daily production/quality feedback ● Submits project intakes and ERP: NetSuite assessments in a timely manner ● Builds partnerships with operational peers to ensure open communication and seamless collaboration ● Meets with Kofile management and staff to meet our customer's needs and delivery schedules. ● Works alongside team members driving efficiency and quality workmanship ● Ensures that established work standards are being followed and work quantity and quality standards are being consistently met. ● Maintains quality while enforcing organization standards ● Communicates any production delays or problems immediately to the staff or to Kofile management. ● Ability to operate a power industrial lift for the loading, unloading and movement of product. ● Provides accurate, highly detail templates for ordering key product for production to ensure a smooth workflow. ● Orders placed in a timely fashion so as not to delay the production schedule and forecast. Qualifications Basic Qualifications Education: High School diploma or GED ● Minimum 2-4 years' experience with Data Entry in a production environment, or in a similar role ● Proficient in Microsoft Office: Excel, Outlook, Word ● Must be able to sit or stand extended periods of time ● Able to lift minimum 25 lbs. repetitively ● Minimum 50 wpm typing ability ● Excellent communication skills with ability to self-lead / self-motivate ● A solid understanding of operations management and organizational methods ● Problem solving skills ● Detailed-oriented with great organizational attributes ● Leadership ability, in addition to a highly organized approach to leadership Additional Information Benefits: As a full-time employee, you will receive access to the following benefits: • Paid overtime available for non-exempt employees • Low-cost insurance (medical, dental, vision, life & disability) • Maternity and paternity benefits • 401(k) plan (company matching) • Paid holidays, vacation, and sick time • Educational assistance

Recognized by Newsweek in 2024 and 2025 as one of America's Greatest Workplaces for Diversity Make Lives Better Including Your Own. If you want to work in an environment where you can become your best possible self, join us! You'll earn more than a paycheck; you can find opportunities to grow your career through professional development, as well as ongoing programs catered to your overall health and wellness. Full suite of health insurance, life insurance and retirement plans are available and vary by employment status. Part and Full Time Benefits Eligibility Medical, Dental, Vision insurance 401(k) Associate assistance program Employee discounts Referral program Early access to earned wages for hourly associates (outside of CA) Optional voluntary benefits including ID theft protection and pet insurance Full Time Only Benefits Eligibility Paid Time Off Paid holidays Company provided life insurance Adoption benefit Disability (short and long term) Flexible Spending Accounts Health Savings Account Optional life and dependent life insurance Optional voluntary benefits including accident, critical illness and hospital indemnity Insurance, and legal plan Tuition reimbursement Base pay in range will be determined by applicant's skills and experience. Role is also eligible for team based bonus opportunities. Temporary associates are not benefits eligible but may participate in the company's 401(k) program. Veterans, transitioning active duty military personnel, and military spouses are encouraged to apply. To support our associates in their journey to become a U.S. citizen, Brookdale offers to advance fees for naturalization (Form N-400) application costs, up to $725, less applicable taxes and withholding, for qualified associates who have been with us for at least a year. The application window is anticipated to close within 30 days of the date of the posting. Requirements to be a Maintenance Technician Maintenance Technicians will maintain scheduled and unscheduled maintenance on, but not limited to: HVAC, elevator, fire and sprinkler equipment, generators, landscape, kitchen equipment and emergency pull cord equipment. Maintenance Technicians will also perform general maintenance projects as scheduled or assigned and respond to maintenance requests by community directors and residents in both private rooms and public living areas. They will also maintain positive communication with local fire marshal, building inspector and any other jurisdictions governing the community. Brookdale is an equal opportunity employer and a drug-free workplace. Keeping our communities running in top-notch condition requires the skills of an experienced maintenance technician. Maintaining the interior and exterior of community buildings and grounds is a great career for the individual who likes working with their hands and tools. Our residents will appreciate your services as you keep public and private living areas up to expectations in accordance with current federal, state and local regulations and company policies.

Classification: Non-Exempt payrate range is $25-$28 per hour. We are Alsco Uniforms. We've been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It's our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We're seeking driven professionals with ambition to grow within our company. We'd love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Essential Functions: - Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems. - Troubleshoots electrical issues. - Responds to daily maintenance requests in a timely fashion to minimize equipment downtime. - Provides emergency/unscheduled repairs of production equipment. - Diagnoses problems, replaces or repairs parts, tests and makes adjustments. - Looks for opportunities to continually improve maintenance processes. - Works with all plant personnel in a cooperative and professional manner. - Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry. - Ensures work is performed safely and efficiently. - Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices. - Studies blueprints and manufacturers' manuals to determine correct operation of machinery. - Proficient in reading electrical schematics. - Maintains accurate and timely records of maintenance performed. - Follows written and verbal instructions and performs other tasks as directed by supervision. - Complies with all Federal, State and local laws. Additional Functions: - May work with and support other branch personnel as required by supervision. - Drive and pick up parts, transport equipment, parts, etc. Qualifications: - Have and maintain a valid driver's license and driving record free of chargeable accidents, speeding or other safety violations. - Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications. - Proficient in the proper use of power and hand tools. - Strong electrical troubleshooting ability of 3 phase 230 volt systems. - PLC programming experience. - Experience in carpentry, boiler repair, welding, and general facility repairs. - Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management - Must be a team player with enthusiasm, initiative, and pride in work well done; self-starter dedicated to continual quality improvement. Education: - High school graduate or equivalency preferred. - Some locations may require relevant certifications, a boiler license or PLC programming. Typical Physical Activity: - Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: - Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: - Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 09/11/2024

Recognized by Newsweek in 2024 and 2025 as one of America's Greatest Workplaces for Diversity Make Lives Better Including Your Own. If you want to work in an environment where you can become your best possible self, join us! You'll earn more than a paycheck; you can find opportunities to grow your career through professional development, as well as ongoing programs catered to your overall health and wellness. Full suite of health insurance, life insurance and retirement plans are available and vary by employment status. Part and Full Time Benefits Eligibility Medical, Dental, Vision insurance 401(k) Associate assistance program Employee discounts Referral program Early access to earned wages for hourly associates (outside of CA) Optional voluntary benefits including ID theft protection and pet insurance Full Time Only Benefits Eligibility Paid Time Off Paid holidays Company provided life insurance Adoption benefit Disability (short and long term) Flexible Spending Accounts Health Savings Account Optional life and dependent life insurance Optional voluntary benefits including accident, critical illness and hospital indemnity Insurance, and legal plan Tuition reimbursement Base pay in range will be determined by applicant's skills and experience. Role is also eligible for team based bonus opportunities. Temporary associates are not benefits eligible but may participate in the company's 401(k) program. Veterans, transitioning active duty military personnel, and military spouses are encouraged to apply. To support our associates in their journey to become a U.S. citizen, Brookdale offers to advance fees for naturalization (Form N-400) application costs, up to $725, less applicable taxes and withholding, for qualified associates who have been with us for at least a year. The application window is anticipated to close within 30 days of the date of the posting. Requirements to be a Maintenance Technician Maintenance Technicians will maintain scheduled and unscheduled maintenance on, but not limited to: HVAC, elevator, fire and sprinkler equipment, generators, landscape, kitchen equipment and emergency pull cord equipment. Maintenance Technicians will also perform general maintenance projects as scheduled or assigned and respond to maintenance requests by community directors and residents in both private rooms and public living areas. They will also maintain positive communication with local fire marshal, building inspector and any other jurisdictions governing the community. Brookdale is an equal opportunity employer and a drug-free workplace. Keeping our communities running in top-notch condition requires the skills of an experienced maintenance technician. Maintaining the interior and exterior of community buildings and grounds is a great career for the individual who likes working with their hands and tools. Our residents will appreciate your services as you keep public and private living areas up to expectations in accordance with current federal, state and local regulations and company policies.

Responsible for performing various tasks in maintenance, troubleshooting, testing, and repair of electrical power and control systems for conveying and processing in the construction aggregates industry. will be based out of our Pittsboro Plant but also travel to our other sites in NC. ESSENTIAL FUNCTIONS: 30% of job: * Preventive Maintenance- Inspect wiring and equipment for proper installation. Administer electrical preventive maintenance programs. Maintain electrical spare parts and supplies inventory on service vehicles and in regional storage locations. 25% of job: * Technical Assistance -Support the Regional Operations and Electrical Engineering department in providing technical assistance to all locations as requested. * Competent in use of digital multi-meters, meggers, and other electronic instruments for field troubleshooting. 25% of job: * Trouble Shooting Power and Control wiring & Electrical Repair-Troubleshoot and repair electrical problems including power, controls, and motors. * Document changes to field drawings. 20% of job: * Manage small electrical jobs. Schedule and monitor electrical contractors on minor projects and maintenance work MINIMUM REQUIREMENTS: Education: High School Diploma or GED Ability to pass DOT physical to operate work truck Certifications: State Electrical license (NC requirements) Work Experience: 2+ years industrial electrical experience is necessary and ability to read and interpret electrical drawings * 1+ year aggregates industry experience preferred * 1+ years' experience PLC ladder logic skill preferred Technical Competencies: * Computer Skills (Excel, Word, Outlook) * Read and interpret electrical drawings. * Ability to lift and carry up to 45lbs. * Troubleshooting and repair of control and power circuits. * Ability to ensure a safe work environment. * PLC Proficiency preferred * Project Management or Capital Projects experience ENVIRONMENT OR PHYSICAL WORKING CONDITIONS: Ability to work under conditions of frequent exposure to dusty conditions and the full range of weather conditions; frequently in, on, and around quarry high walls and pit; extended periods working from elevated positions or in tunnels. * Benefits start on day 1 of employment and include: * Medical, dental, vision, life insurance, long-term disability * Paid time off: personal, vacation, holidays, 5 well being days yearly * Matching 401K and retirement pension * Additional benefits and bonus plan Luck Companies is committed to creating a diverse environment and is proud to be an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. We are committed to building a team that represents a variety of backgrounds, perspectives, and skills. The more inclusive we are, the better our work will be. EEO

Recognized by Newsweek in 2024 and 2025 as one of America's Greatest Workplaces for Diversity Make Lives Better Including Your Own. If you want to work in an environment where you can become your best possible self, join us! You'll earn more than a paycheck; you can find opportunities to grow your career through professional development, as well as ongoing programs catered to your overall health and wellness. Full suite of health insurance, life insurance and retirement plans are available and vary by employment status. Part and Full Time Benefits Eligibility Medical, Dental, Vision insurance 401(k) Associate assistance program Employee discounts Referral program Early access to earned wages for hourly associates (outside of CA) Optional voluntary benefits including ID theft protection and pet insurance Full Time Only Benefits Eligibility Paid Time Off Paid holidays Company provided life insurance Adoption benefit Disability (short and long term) Flexible Spending Accounts Health Savings Account Optional life and dependent life insurance Optional voluntary benefits including accident, critical illness and hospital indemnity Insurance, and legal plan Tuition reimbursement Base pay in range will be determined by applicant's skills and experience. Role is also eligible for team based bonus opportunities. Temporary associates are not benefits eligible but may participate in the company's 401(k) program. Veterans, transitioning active duty military personnel, and military spouses are encouraged to apply. To support our associates in their journey to become a U.S. citizen, Brookdale offers to advance fees for naturalization (Form N-400) application costs, up to $725, less applicable taxes and withholding, for qualified associates who have been with us for at least a year. The application window is anticipated to close within 30 days of the date of the posting. Requirements to be a Maintenance Technician Maintenance Technicians will maintain scheduled and unscheduled maintenance on, but not limited to: HVAC, elevator, fire and sprinkler equipment, generators, landscape, kitchen equipment and emergency pull cord equipment. Maintenance Technicians will also perform general maintenance projects as scheduled or assigned and respond to maintenance requests by community directors and residents in both private rooms and public living areas. They will also maintain positive communication with local fire marshal, building inspector and any other jurisdictions governing the community. Brookdale is an equal opportunity employer and a drug-free workplace. Keeping our communities running in top-notch condition requires the skills of an experienced maintenance technician. Maintaining the interior and exterior of community buildings and grounds is a great career for the individual who likes working with their hands and tools. Our residents will appreciate your services as you keep public and private living areas up to expectations in accordance with current federal, state and local regulations and company policies.

GENERAL PURPOSE Demonstrate full proficiency in maintenance/mechanical activities to ensure that all equipment is operating effectively and efficiently. Perform general maintenance, preventative maintenance, over-hauls, modification, fabrication, welding, and/or mechanical and electrical troubleshooting and repair. Work with a limited degree of supervision, with oversight focused on complex and/or new assignments. Act as an informal resource for colleagues with less experience. JOB DUTIES AND RESPONSIBILITIES · Perform maintenance and/or repairs (planned, unplanned, emergency) on production, processing, and packaging equipment as well as utility related equipment or systems, following all safety procedures · Perform preventative maintenance; perform routine inspections of equipment for assessment of reliability and performance · Read, analyze, and interpret technical procedures, electrical schematics, service manuals, and work orders to perform required maintenance and service · Support the installation of new equipment · Assist operators with training or troubleshooting to minimize equipment downtime · Complete work orders in a timely manner, while maintaining high quality standards · Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties · Maintain communication with other departments, management, and employees and notify them of any problems and/or concerns that may restrict the efficiency of production · Ensure all repairs are documented. Complete all paperwork clearly, legibly, and accurately with required information. Document all required information in accordance with standard operations procedures · Stay up to date on new products, equipment, technology and techniques · Utilizing continuous improvement mindset, assist in identifying opportunities to improve processes · Exhibit the ability to anticipate parts requirements for the tasks, follow proper purchasing procedures, and acquire parts ahead of anticipated task performance · Maintain safe working conditions for employees and compliance with all state and federal regulations regarding health and safety issues · Follow all DFA good manufacturing practices (GMP) and work in a manner consistent with all corporate regulatory, food safety, quality, and sanitation requirements · The requirements herein are intended to describe the general nature and level of work performed by employee, but is not a complete list of responsibilities, duties, and skills required. Other duties may be assigned as required

***There are 3 General Maintenance Technician Positions *** Technicians may specialize as a COM (Change of Occupancy Maintenance) or resident service request technician or may be utilized to respond to multiple types of work orders. Primary responsibility is to perform maintenance functions in the community, including rental units, office buildings, residential areas, grounds, and parking lots. Perform general maintenance and repair of building structures and associated mechanical, electrical, plumbing, sanitary systems, and equipment. Ensure that all service is performed safely and results in favorable customer feedback which is documented by favorable customer service survey results. What you will do Respond to service calls and complete COM work and other property maintenance requirements. This includes cleaning, painting, interior/exterior decorating and maintenance, lawn maintenance, debris removal, plumbing, electrical work, smoke detector maintenance, repair or replacement of lights, roof repairs, heating/air systems maintenance, appliance repairs, etc. Transport, install, and connect stoves, refrigerators, dishwashers and other electrical and gas appliances. Load and unload trucks and other conveyances Move supplies and materials to proper location by wheelbarrows or hand trucks. Stack materials for storage or binning. Collect refuse and salvageable materials. Transport equipment, furnishings and appliances to job sites. Repair and fabricate window and door screens and frames Dig, fill and tamp earth excavations Level grounds using pick, shovel, tamper and rake. Shovel concrete. Clean culverts and ditches. Cut trees and brush. Operate power tools and lawn mowers. Remove floor tile, sheet vinyl, ceramic floor tile and plywood. Remove damaged drywall. Operate power blowers or use brooms to clean roof tops, sidewalks, and driveways of leaves and debris. Ensure work-site clean-up. Respond to and complete on-call after-hour emergency and urgent repairs. Update work order status, including time, materials, and notes on provided mobile devices in an accurate and timely manner. Complete and submit all required paperwork in an accurate and timely manner. Keep supervisor well-informed of activities, results of efforts, problems identified/potential problems, etc. Recommend corrective actions to supervisor. Maintain vehicle and vehicle inventory as prescribed. This position requires driving for the Company using either 1) a Company vehicle, at any frequency from Rarely to Constantly; or, 2) a Personal or Rental vehicle to conduct Company business more than 50% of the time to perform work duties. Qualifications High School Diploma or GED Required Vocational or Technical Training Preferred 1-3 years Required Computer Literacy - Basic familiarity with computers. Navigate at a basic level within web-based applications. Written Communications - Read and write in English to understand basic instructions and take direction from supervisors, communicate effectively with clients, visitors, and other organization staff, and respond to basic questions. Oral Communications - Understand spoken English to follow basic instructions and take direction from supervisors; communicate effectively in basic English with clients, visitors and organization staff in response to routine questions. Knowledge - Basic knowledge of fundamental concepts, practices and procedures with the ability to use them in routine situations. Teamwork - Work collaboratively in small teams to improve the operations of immediate work group by offering ideas, identifying issues, and respecting team members. Customer Service - Demonstrate a positive attitude and respond to requests in a timely and respectful manner. Flexibility/Adaptability - Work is varied every day and the employee needs to be adaptable to respond to these changes and use independent judgment and manage priorities. Must demonstrate basic competency in carpentry, plumbing, and electrical trades at a minimum as assessed through written, verbal, and hands on assessments. “Skilled” based on assessment in flooring cleaning, repair, or installation. Ability to plan, organize, and prioritize work and work to deadlines using sound judgement. Ability to adapt successfully to changing situations and environments, managing multiple assignments and tasks and working under pressure. Ability to utilize mobile devices including applications, email, and internet. Proficiency with basic hand tools like hammers, screwdrivers, hand saws, pliers, wrenches, and tape measures. Proficiency with trade-specific hand tools like multi-meter, tube cutter, torch, level, and HVAC gauges. Proficiency with small power tools like drills, Sawz-All, sanders, and power saws. Attention to Task/ Work Pace Maintenance - Work requires close attention to task for work to be accurately completed. Intermitted breaks during the workday do not compromise the work. Work cooperatively and always conduct oneself in a professional manner when in contact with consumers, staff, subcontractors, monitors, and the public. Deal with customers and others in a diplomatic and positive manner. Demonstrate good verbal, written and listening communication skills as measured by accuracy, completeness, and timeliness of work. With reasonable accommodation, differentiate between hot and cold, sharp and dull, and smell. Be able to twist neck or waist for up to two hours per shift. Power grasp with one or both hands for up to two hours per shift. Be able to work for 2-4 hours per shift without a break. DL NUMBER - Driver's License, Valid and in State Required Compensation We are committed to offering competitive and equitable compensation. Final salaries will be determined based on factors such as geographic location, skills, education, licenses, certifications, and/or experience. In addition to these factors - we believe in the importance of pay equity. We consider internal and external factors as a part of every final offer. We also offer a generous total compensation and benefits package. Benefits A competitive salary is only one part of your total rewards. We also offer a comprehensive benefits package, including paid time off, medical, dental, life and disability insurance, HSA/FSA accounts, retirement, rewards programs, and so much more! Click Here for Benefits Overview ******************************************************** You must be able to pass a drug, background screen and physical abilities test/motor vehicle record check (if one is required per the position). EEO/ADA The Company and its affiliates provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. #INDHUNT #ZRHMH

The Maintenance Supervisor will assist the Maintenance Director/Community Director in maintaining the physical condition of property in safe, attractive, and comfortable condition. This includes, but not limited to, establishing preventive maintenance programs, performing property and equipment inspections, maintaining the project inventory, supervising personnel, assigning maintenance tasks. Also accountable for preparing work schedules, and ensuring compliance with all maintenance related policies. This role ensures that the units and other property facilities at your assigned location remain in good working order. This position performs tasks as needed, which may include service requests and preparing units for rent availability (including painting units and landscape duties). What you will do Schedules, trains, daily supervises, and evaluates all maintenance personnel. This includes ensuring the maintenance team is fully compliant with all required training. Prioritizes work orders, and follows up on assignments to ensure timely completion. Supports after-hours Emergency Call program. Responsible for all Company owned equipment and small tools. Participates and supervises the make-ready of vacant units as necessary. Makes regular inspections of the property. Establishes preventive maintenance procedures. Prepares Purchase Orders and orders all parts and supplies. Ensures compliance with all preventive maintenance procedures. Assists in performing annual / semi-annual unit inspections. Assists in all aspects of the project's maintenance, including grounds, custodial, preventive, corrective, deferred, and emergency. Assists Maintenance Director as requested. Contributes to resident retention programs. Ensures that unsafe conditions are corrected in a timely manner. Learns and ensures compliance with all company, local, state, and federal safety rules. This position requires driving for the Company using either 1) a Company vehicle, at any frequency from Rarely to Constantly; or, 2) a Personal or Rental vehicle to conduct Company business more than 50% of the time to perform work duties. Qualifications High School Diploma or GED or equivalent Required or advanced training or degree in building maintenance, management, construction, skilled trades or other related subject Preferred have knowledge of the following trades/skills: electrical, HVAC, plumbing, carpentry, and general building maintenance and 5 or more years' experience in building maintenance. Required and previous experience with administrative reporting and Yardi preferred. Preferred previous experience managing other highly desirable. Perform work outside in all weather conditions and perform physical work, as well as to lift weights of up to 50 pounds regularly and above 50 pounds occasionally. Requires a self-motivated, team player who pays close attention to detail and who can prioritize in a fast-moving environment. Must demonstrate excellent communication and interpersonal skills, particularly the ability to interact effectively with a wide range of different people in a variety of situations. DL NUMBER - Driver's License, Valid and in State Required and Environmental Protection Agency (EPA) Certification Required and HVAC Certification Required OSHA-10 Training OSHA 10 certification Required Compensation We are committed to offering competitive and equitable compensation. Final salaries will be determined based on factors such as geographic location, skills, education, licenses, certifications, and/or experience. In addition to these factors - we believe in the importance of pay equity. We consider internal and external factors as a part of every final offer. We also offer a generous total compensation and benefits package. Benefits A competitive salary is only one part of your total rewards. We also offer a comprehensive benefits package, including paid time off, medical, dental, life and disability insurance, HSA/FSA accounts, retirement, rewards programs, and so much more! Click Here for Benefits Overview ******************************************************** You must be able to pass a drug, background screen and physical abilities test/motor vehicle record check (if one is required per the position). EEO/ADA The Company and its affiliates provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. #INDHUNT #ZRHMH

Job Description Lula is looking for a 1099 handyman to help with property maintenance of several hundred rental properties across the Greensboro North Carolina Area. We are seeking individuals who have experience in the property management industry and has an eager attitude. This individual must be trustworthy, possess great communication skills, capable with technology, and be apt in problem-solving. You will need reliable transportation. Value Proposition: *We pay extremely fast (within 24 hours of completing a job via ACH)!! *You sent your own hourly rates *We have a lot of work on a daily basis Experience in the following are a plus: *Drywall *Light plumbing *Light electrical *Painting *Performing maintenance and light repairs *Minor repairs/replacements on appliances *Other miscellaneous maintenance work Requirements -Must have valid ID -Must provide your own tools and materials -Must be willing to undergo a background check -Must have transportation -Must have an iPhone or Android cell phone

Lessen is the tech-enabled, end-to-end property service provider that is transforming how commercial and residential real estate services are delivered and managed at scale. Lessen's technology platform provides data-driven insights that unlock key growth opportunities for the entire real estate ecosystem-including investors, owners, managers, and service providers. The company leverages a network of over 30,000 vetted, qualified vendors (Lessen Affiliates) serving clients with over 1 million properties and completing more than 3.5 million work orders annually across an expanding range of services. Lessen, LLC is a venture-backed, privately held company with offices in Scottsdale and Chicago. Pay is determined by several compensable factors, such as qualifications, skill level, competencies, and work location. Pay range starting at $23 hr - $27 hr. Lessen is seeking an experienced, solution-oriented Field Maintenance Technician with a minimum of 3 years of verifiable, hands-on experience in property management maintenance or a related trade. You will own your work orders, manage budgets, and oversee comprehensive maintenance for properties in our portfolio. We prioritize quality, over quantity, to provide excellent customer service to our clients. We are looking for forward thinking, and solution-oriented techs who want to grow with our brand as we expand our locations nationally. • Quarterly Bonus! You will be eligible for a quarterly discretionary bonus of up to 5% of quarterly earnings • No on-call! Weekday schedule!• The company will provide a tool/equipment allowance of $50 per month• The company will provide a cell phone allowance of $50 per month • Company fleet vehicle and fuel card• Growth opportunities into Lead Technicians and Field Maintenance Managers• Provided OSHA training• Competitive hourly rate and corporate-level benefits!What You'll Do: Respond, as directed, promptly and professionally to skilled maintenance and repair requests. Ensure work is performed in a timely and professional manner Assist with scheduling, overseeing, and communicating with contractors to obtain bids and checking work for completeness Purchase maintenance supplies as needed for the property Perform preventive maintenance and comprehensive repairs in the areas of plumbing, appliances, pool equipment, carpentry, sheetrock, exterior and basic electrical issues. You Should Have: Ability to travel within your region: this position is based 100% in the field. 3+ years of verifiable, hands-on experience in property management maintenance, other building maintenance, or a related trade. Demonstrated Proficiency in diagnosing, troubleshooting, and performing comprehensive repairs across all standard trades, plumbing, electrical, appliance, carpentry. Proven ability to manage and complete independent work orders, budget time/materials, and communicate effectively with contractors/clients. Current driver's license and automobile insurance. Must be able to lift, push, pull 50lbs regularly; up to 75lbs occasionally; and 75+lbs with assistance. Holding a current or previous plumbing license is a plus. #IND1 Why Lessen:· Competitive compensation· Health, Dental, Vision, Life, Disability options· 401K retirement savings plan· Paid vacation, federal and floating holidays· Maternity/Paternity Pay· Career advancement opportunities· All the tools you'll need to be successful Lessen is intentional about attracting, developing, and retaining amazing talent from diverse backgrounds. We're looking for teammates that are enthusiastic, empathetic, curious, motivated, reliable, and will help us amplify the positive & inclusive culture we've been building. Lessen is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information.

Job Description Lula is looking for a 1099 Handyman Pro to help with property maintenance of several thousand rental properties across the Charlotte area. We are seeking individuals who have experience in the rental property industry and has an eager attitude. What is Lula? Lula is a service designed for property managers to eliminate the hassle of managing and coordinating maintenance, improve the resident experience, and reduce maintenance costs for property owners. Lula works hand-in-hand with our service-provider partners to ensure everyone gains. Unlike other platforms, Lula has been designed from the ground up to work with your needs and answer your concerns. Whether you are a mom-and-pop small business or an international corporation, there are many reasons why joining the Lula Network is a good idea for your company. Apply Here: ************************************************* BENEFITS WITH LULA: -Lula delivers real jobs, not leads -Set your own hourly rates -24/7 phone and text support for Lula Pros -New jobs available daily -Choose only the jobs you want -Paid for labor and parts within 1-3 days REQUIREMENTS: -Must be 18 or older -Must have General Liability Insurance -No felonies within the past 7 years -Be friendly, respectful, and punctual -Must provide your own tools and materials -Must complete vendor onboarding and be approved Job Type: Contract Please email ************* with any questions

Job Description Lula is looking for a 1099 handyman to help with property maintenance of several hundred rental properties across the Durham North Carolina Area. We are seeking individuals who have experience in the property management industry and has an eager attitude. This individual must be trustworthy, possess great communication skills, capable with technology, and be apt in problem-solving. You will need reliable transportation. Value Proposition: *We pay extremely fast (within 24 hours of completing a job via ACH)!! *You sent your own hourly rates *We have a lot of work on a daily basis Experience in the following are a plus: *Drywall *Light plumbing *Light electrical *Painting *Performing maintenance and light repairs *Minor repairs/replacements on appliances *Other miscellaneous maintenance work Requirements -Must have valid ID -Must provide your own tools and materials -Must be willing to undergo a background check -Must have transportation -Must have an iPhone or Android cell phone

Job Description Lula is looking for a 1099 handyman to help with property maintenance of several hundred rental properties across the Winston-Salem North Carolina Area. We are seeking individuals who have experience in the property management industry and has an eager attitude. This individual must be trustworthy, possess great communication skills, capable with technology, and be apt in problem-solving. You will need reliable transportation. Value Proposition: *We pay extremely fast (within 24 hours of completing a job via ACH)!! *You sent your own hourly rates *We have a lot of work on a daily basis Experience in the following are a plus: *Drywall *Light plumbing *Light electrical *Painting *Performing maintenance and light repairs *Minor repairs/replacements on appliances *Other miscellaneous maintenance work Requirements -Must have valid ID -Must provide your own tools and materials -Must be willing to undergo a background check -Must have transportation -Must have an iPhone or Android cell phone