Forklift Operator jobs at Pacific Coast Building Products - 1270 jobs

As a Load Crew Operator, you will handle packaged explosive products, operate manufacturing vehicles on the job site, and load and drive box trucks. All activity is done in strict compliance with safety and company procedures. You will load and unload trucks. This position involves being outside in all weather conditions, lifting and carrying 23+kg of product and other materials, and frequently squatting and bending. Safety is always a priority whether you are driving or assisting with site preparation and equipment setup. Under the direction of the Manager, you will inspect product bins, inventory of product, and complete required paperwork. To keep your truck and equipment running properly, you will perform both general and preventative maintenance. As Driver /Load Crew Operator, you will enjoy keeping busy and being on the move throughout the day. Qualifications and education requirements Must be able to obtain CDL. High school diploma or equivalent Valid driver's license Minimum of 18 years old Basic Math skills (basic counting skills required) Ability to read and maintain proper documentation as required. Meet requirements of all state and federal explosive laws and qualify as an ATF explosive processor. Must be able to work in various conditions (hot/cold and wet floors) Must be able to work with minimal supervision. Availability to work various shifts as required by business demands. Must be able to work overtime on short notice. Must be able to work in loud work environment; hearing protection required in some areas (range of 50 - 90 decibels) Must be able to lift and carry up to 60 lbs. on a regular basis. Must be able to stand/walk up to 10 hours per day. Have high manual dexterity. Ability to work overtime when applicable. Effective written and verbal communication skills Ability to wear work uniforms and required PPE. Semi-annual requirement for blood check due to potential exposure to chemicals. Ability to get fitted wand wear formal respirator, half faced style, as needed.

Responsible for preparing materials to be used for packaging and shipping of finished coils. Responsible for packaging finished coils in a safe manner and moving those coils to a designated location for finished goods. Responsible for verifying that Material Handler, Handler, Quality Control, Manufacturing, Moving

Job title: HAC Warehouse Specialist Reports to: Warehouse Manager or Director of Inventory and Vendor Management A highly visible role managing all aspects of the shipping/receiving and stocking of machines/parts inventory - including but not limited to, overseeing all logistics (interacting with freight carriers), proper warehousing and accounting for said products, adherence to specific OSHA/EH&S requirements, and staging of service parts. Duties and responsibilities: Manage logistics for all incoming and outgoing freight. Inspection of all incoming products - visually inspecting equipment and boxes ensuring quality product is received (no visual damage incurred during shipment). If damaged freight is received, you must get approval from manager before refusing delivery. Ensure all parts and equipment items are kept with like parts and equipment and that bin locations are properly recorded in the inventory management system for ease of locating and inventory control. Consistency in location is a key result of these efforts. Conduct random inventory cycle counts as requested by management to verify accurate stock counts. Ensure shipping accuracy by confirming exact part numbers and/or model and serial numbers along with correct ordered amount against all order paperwork from sales and service. Discrepancies are to be immediately communicated to your manager. Coordinate pick-up and deliveries with 3rd party carriers. Receive stock deliveries, unpack, confirm receipt, and put away in correct location. Input and track inventory in ERP system and/or SAP. Arrange stock transfers in/out of other branches - coordinate and stage service parts for service technicians. Ensure compliance with all applicable EH&S and OSHA rules and laws, and company ISO quality standards. Label units and equipment by creating a large 8.5 x 11 identification sheet indicating the model and serial number and placing on the outside of unit/equipment ensuring its visibility from the floor. Units/equipment must be organized and stored in a central area for ease of retrieval and inventory counts. Keeps the warehouse clean, organized, and accessible. Perform other duties as assigned. Education: High School Diploma or equivalent (Related industry experience may be considered in lieu of education requirements) Associate degree or other post high school training (2 years duration) preferred not required. Professional experience: Air compressor experience a plus. Prior logistics, warehousing, and inventory management experience. Skilled forklift operations experience and certification is required. Moderate proficiency with Microsoft programs such as Outlook, Word, Excel preferred. SAP knowledge preferred. 1-2 years warehousing, inventory management and logistics experience. Key behaviors: Display the ability to manage time accordingly, with good organization skills and attention to detail. Must have the ability to work and solve problems independently, a motivated, self-starter. Ability to manage multiple priorities, remain calm under pressure and work well across all levels of the organization. Team player who will coordinate with other departments daily to accomplish tasks. Ability to communicate with internal and external customers (oral and written) in the English language. Contribute to positive Company branding by projecting a knowledgeable, professional, and customer-orientated image to customers. Open and flexible to changing priorities based on business needs. Strong research skills. Dedicated to completion of responsibilities, having a sense of urgency. Position Requirements: Must possess a valid driver's license and be insurable. This position is highly physical and requires regular use of hands, fingers, walking, stooping, and kneeling. It requires employees to regularly lift up to 50 lbs. and climb ladders/stairs. Must wear appropriate PPE, such as steel toed boots and safety glasses when necessary. Direct reports: N/A The successful candidate is responsible for complying with Hitachi's Code of Ethics and related policies. In performing the job, the incumbent shall take all steps necessary to comply with our safety rules and requirements and must actively support the organization's efforts to meet and exceed its goals of creating and maintaining a safe workplace. This description is to serve as a guide. It is intended to be flexible and will continue to evolve over time with business needs and demands and may be updated periodically and at the Company's discretion. Hitachi Global Air Power US, LLC is an equal opportunity employer and will not discriminate based on race, religion, color, age, gender, sexual orientation, national origin, genetic information, veteran status, physical or mental disability, or other protected categories under applicable law, whether in recruitment, employment, promotion, transfer, compensation, or other conditions of employment.

Job title: HAC Warehouse Specialist Reports to: Warehouse Manager or Director of Inventory and Vendor Management A highly visible role managing all aspects of the shipping/receiving and stocking of machines/parts inventory - including but not limited to, overseeing all logistics (interacting with freight carriers), proper warehousing and accounting for said products, adherence to specific OSHA/EH&S requirements, and staging of service parts. Duties and responsibilities: Manage logistics for all incoming and outgoing freight. Inspection of all incoming products - visually inspecting equipment and boxes ensuring quality product is received (no visual damage incurred during shipment). If damaged freight is received, you must get approval from manager before refusing delivery. Ensure all parts and equipment items are kept with like parts and equipment and that bin locations are properly recorded in the inventory management system for ease of locating and inventory control. Consistency in location is a key result of these efforts. Conduct random inventory cycle counts as requested by management to verify accurate stock counts. Ensure shipping accuracy by confirming exact part numbers and/or model and serial numbers along with correct ordered amount against all order paperwork from sales and service. Discrepancies are to be immediately communicated to your manager. Coordinate pick-up and deliveries with 3rd party carriers. Receive stock deliveries, unpack, confirm receipt, and put away in correct location. Input and track inventory in ERP system and/or SAP. Arrange stock transfers in/out of other branches - coordinate and stage service parts for service technicians. Ensure compliance with all applicable EH&S and OSHA rules and laws, and company ISO quality standards. Label units and equipment by creating a large 8.5 x 11 identification sheet indicating the model and serial number and placing on the outside of unit/equipment ensuring its visibility from the floor. Units/equipment must be organized and stored in a central area for ease of retrieval and inventory counts. Keeps the warehouse clean, organized, and accessible. Perform other duties as assigned. Education: High School Diploma or equivalent (Related industry experience may be considered in lieu of education requirements) Associate degree or other post high school training (2 years duration) preferred not required. Professional experience: Air compressor experience a plus. Prior logistics, warehousing, and inventory management experience. Skilled forklift operations experience and certification is required. Moderate proficiency with Microsoft programs such as Outlook, Word, Excel preferred. SAP knowledge preferred. 1-2 years warehousing, inventory management and logistics experience. Key behaviors: Display the ability to manage time accordingly, with good organization skills and attention to detail. Must have the ability to work and solve problems independently, a motivated, self-starter. Ability to manage multiple priorities, remain calm under pressure and work well across all levels of the organization. Team player who will coordinate with other departments daily to accomplish tasks. Ability to communicate with internal and external customers (oral and written) in the English language. Contribute to positive Company branding by projecting a knowledgeable, professional, and customer-orientated image to customers. Open and flexible to changing priorities based on business needs. Strong research skills. Dedicated to completion of responsibilities, having a sense of urgency. Position Requirements: Must possess a valid driver's license and be insurable. This position is highly physical and requires regular use of hands, fingers, walking, stooping, and kneeling. It requires employees to regularly lift up to 50 lbs. and climb ladders/stairs. Must wear appropriate PPE, such as steel toed boots and safety glasses when necessary. Direct reports: N/A The successful candidate is responsible for complying with Hitachi's Code of Ethics and related policies. In performing the job, the incumbent shall take all steps necessary to comply with our safety rules and requirements and must actively support the organization's efforts to meet and exceed its goals of creating and maintaining a safe workplace. This description is to serve as a guide. It is intended to be flexible and will continue to evolve over time with business needs and demands and may be updated periodically and at the Company's discretion. Hitachi Global Air Power US, LLC is an equal opportunity employer and will not discriminate based on race, religion, color, age, gender, sexual orientation, national origin, genetic information, veteran status, physical or mental disability, or other protected categories under applicable law, whether in recruitment, employment, promotion, transfer, compensation, or other conditions of employment.

Responsible for the overall operation of the exit section of the paint line, including speed, steering and tension adjustments. Monitors the operating conditions to verify that line tension and drive systems are operating properly. Responsible for in Machine Operator, Operator, Quality Control, Operations, Manufacturing, Skills

Description and requirements At Skanska Building Services, we pride ourselves on delivering top-tier facilities management solutions across a wide range of sectors. From hard services like M&E maintenance to comprehensive soft FM offerings (stores administration, security helpdesk etc…), our team is committed to excellence, sustainability, and client satisfaction. Step into a role that assists in keeping the UK MoD facilities running. Skanska Building Services is a leader in facilities management, delivering cutting-edge hard and soft FM solutions to prestigious clients across critical sectors. We're seeking a Stores Operative to join our expert team at Northwood. Working within the Logistics Dept , delivering Stores services to meet the contractual requirements of a key MoD contract in Northwood What you'll do: * The Stores person will receive, issue and deliver items of stores in a courteous and professional manner. * Account for items of stores on the MOD MJDI system. * Carry out filing of all auditable documentation as directed by the Line Manager. * Maintain appearance and cleanliness of all areas in the Stores Complex. * Driving a variety of vehicles within the Stores pool, ranging from cars, lorries, forklifts and Powerflex Sweepers. Complete first daily inspections on all vehicles. * Maintain the outward appearance and cleanliness of the Northwood Headquarters. * Undertake general duties as directed by your Line Manager to support the Northwood Contract * To assist with gritting and snow clearing from roads, pathways and other hard landscaped areas as directed in adverse winter weather conditions. What you'll bring to the role: * Proven record of good customer service. * A good sound knowledge of stores accounting procedures - ideally MoD MJDI. * Forklift Driver licence (highly desirable) * Good Health & Safety knowledge and attention to detail. This role requires a minimum level of security clearance and may also require a higher level of National Security Vetting. You should be aware that certain levels of clearance or specific projects and/or sites have UK residency requirements; and any dual or multiple nationalities must be declared. Any persons who do not fulfil these residency requirements may be unable to obtain the required level of clearance and would not be eligible to undertake this role. Equal opportunities We thrive through embracing differences, whether they be social backgrounds, ethnicity, disability, gender identity or expression, age, religion, sexual orientation and any other protected characteristic - we know that diversity opens a rich potential for new ways of thinking, helping us to build successful and high-performing teams. We call it Naturally Skanska. Flexible working We welcome you to ask about flexibility at interview stage and we will explore what is possible for the role. Reasonable adjustments We would like you to perform at your best at every stage of our recruitment process. Please contact us using ************************* if you require any adjustments that would support you throughout your application. More information about the role Please note this is an advert for our job vacancy, and therefore may not be inclusive of all assigned duties, responsibilities, or aspects of the role described, and may be amended at any time at the sole discretion of Skanska. For a full role profile, please contact us: ************************* Closing date The closing date for this vacancy may be subject to change any time at the sole discretion of the business. We are a 2024 Circle Back Initiative Employer - we commit to respond to every applicant.

Employee Value Proposition Working for a world-class leader in building structures and bridges, a Schuff Steel HMO-A brings his/her expertise and knowledge in fabrication to build some of the most complex and high-profile projects in the commercial building, bridge and industrial sectors. Critical to the field of forming material by operation of CNC machines and equipment such as Plasma Arc, NC Punch Plasma, Beam Line Machine, Beam Punch Operator and NC Angle Master. Also operates machines under HMO B and C classification. The HMO-A utilizes a high degree of proficiency while utilizing full skills of the trade including knowledge and understanding of CNC machine programs. To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily. In return, the Company will offer competitive market-based compensation and comprehensive health insurance benefits. We are committed to professional development and growing our business. We are looking for a professional with a growth mindset who desires a progressive long-term career. Core Responsibilities Layout, read, interpret blueprints, shop drawings and other company documents. Operates heavy steel fabrication machinery according to company requirements. Load and unload equipment with material manually and through the use of an overhead crane or magnet. Perform daily preventative maintenance. Troubleshoot, properly mark and stamp materials. Perform daily cleaning of machines. Locate parts and supplies for machine operation and grind material. Other duties may be assigned. Perform other routine duties per management direction. Must adhere to and follow all safety rules and PPE requirements Education/Training - Work Experience High school diploma or general education degree (GED), and/or 12 months experience; completion of a closely related vocational training course through an accredited school may substitute for the required experience Specialized Knowledge - Certificates & Licenses Equipment Knowledge & Skills - includes the operation of CNC machines and equipment such as Plasma Arc, NC Punch Plasma, Beam Line Machine, Beam Punch Operator and NC Angle Master. Also operates machines under HMO B and C Classification. Overhead cranes and forklifts Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: None DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan *Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at **************. Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.

Employee Value Proposition Working for a world-class leader in building structures and bridges, a Schuff Steel HMO-B brings his/her expertise and knowledge in fabrication to build some of the most complex and high-profile projects in the commercial building, bridge and industrial sectors. Critical to the field of forming material by operation of non-CNC machines and equipment such as M/S Punch, NC Drill, Roll Break and Press Brake. Also operates machines under HMO C classification. The HMO-B utilizes a high degree of proficiency while utilizing full skills of the trade including knowledge and understanding of non-CNC machines and equipment. To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily. In return, the Company will offer competitive market-based compensation and comprehensive health insurance benefits. We are committed to professional development and growing our business. We are looking for a professional with a growth mindset who desires a progressive long-term career. Core Responsibilities Layout, read, interpret blueprints, shop drawings and other company documents. Operates heavy steel fabrication machinery according to company requirements. Load and unload equipment with material manually and through the use of an overhead crane or magnet. Perform daily preventative maintenance. Troubleshoot, properly mark and stamp materials. Perform daily cleaning of machines. Locate parts and supplies for machine operation and grind material. Keeps work area organized and clean. Transport material by a crane as needed and required. Must adhere to and follow all safety rules and PPE requirements Education/Training - Work Experience High school diploma or general education degree (GED), and/or 12 months experience; completion of a closely related vocational training course through an accredited school may substitute for the required experience. Specialized Knowledge - Certificates & Licenses Equipment Knowledge & Skills - includes the operation of non-CNC machines and equipment such as M/S Punch, NC Drill, Roll Break and Press Brake Also operates machines under HMO C Classification. Overhead cranes and forklifts Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Mathematical Skills: Ability to add, subtract, multiply and divide into all units of measure. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: None DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan *Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at **************. Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.

Employee Value Proposition Working for a world-class leader in building structures and bridges, a Schuff Steel HMO-C brings his/her expertise and knowledge in fabrication to build some of the most complex and high-profile projects in the commercial building, bridge and industrial sectors. Critical to the field of forming material by operation of non-CNC machines and equipment such as Saw, Punch, Shear, Beam Splitter and Threader. Also assists HMO A's and B's with their equipment. The HMO-C utilizes a high degree of proficiency while utilizing full skills of the trade including knowledge and understanding of non-CNC equipment and machines To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily. In return, the Company will offer competitive market-based compensation and comprehensive health insurance benefits. We are committed to professional development and growing our business. We are looking for a professional with a growth mindset who desires a progressive long-term career. Core Responsibilities Layout, read, interpret blueprints, shop drawings and other company documents. Operates heavy steel fabrication machinery according to company requirements. Load and unload equipment with material manually and through the use of an overhead crane or magnet. Perform daily preventative maintenance. Troubleshoot, properly mark and stamp materials. Perform daily cleaning of machines. Locate parts and supplies for machine operation and grind material. Keeps work area organized and clean. Transport material by a crane as needed and required. Must adhere to and follow all safety rules and PPE requirements Education/Training - Work Experience High school diploma or general education degree (GED), and/or 12 months experience; completion of a closely related vocational training course through an accredited school may substitute for the required experience Specialized Knowledge - Certificates & Licenses Equipment Knowledge & Skills - includes the operation of non-CNC machines and equipment such as Saw, Punch, Shear, Beam Splitter and Threader. Also assists HMO A's and B's with their equipment. Overhead cranes and forklifts Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: None DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan *Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at **************. Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.

Elam Consttruction, a divison of Summit Materials, is looking for a mechanically inclined, safety-oriented Loader Operator to operate Front End loaders in our Durango, Colorado Aggregate Pit. As a member of your team, the success of this operation is very dependent on your willingness and desire to be a team player. Seek for opportunities to make your co-workers successful. They will also be seeking for opportunities to make you successful. Roles and Responsibilites * Operate equipment to assist with the daily production and operations of the plant. * Assist plant supervisor with the daily operations and upkeep of the plant. * Ability to inspect all areas of the plant to perform belt repairs, screen changes, bearing replacements and other necessary maintenance. * Perform welding and fabrication duties as needed. * Detect safety hazards and equipment malfunctions and respond accordingly. * Must be able to work evenings and weekends when necessary. * Perform other job duties as assigned. Skills and Qualifications * Proficiency in operating a diverse range of large aggregate heavy machinery, including excavators, bulldozers, and loaders. * Knowledge of welding and general mechanics preferred. * Ability to adapt to evolving project requirements, operational strategies, and safety regulations, ensuring compliance with industry standards. * Deep understanding of MSHA Regulations. * High school education or GED equivalent. Benefits Recession Resistant Industry Year-Round Work Overtime Available Paid Holidays Paid Time Off / Vacation Pay 401(k) Retirement Plan w/ 100% employer match up to 4% contribution Medical Insurance - United Health Care Vision Insurance Dental Insurance Life Insurance - Company Paid Short-Term / Long-Term Disability Insurance - Company Paid Get Hired: What To Expect During Our Hiring Process * Background Check * Motor Vehicle Record Check * DOT 5-Panel Drug Screen * Fit for Duty Baseline Physical * Paid Orientation * A great team to support you throughout your career with Summit Materials companies! Req #: 2272

Since 1946, The Jet Pulverizer Company, Inc. has been committed to providing state-of-the-art processing equipment and services. The continuous technological advancement of our line of Micron-Master Jet Pulverizers and ongoing modernization and expansion of our Custom Grinding Division provide our customers with unsurpassed value and quality in both jet pulverizing equipment and custom grinding services. Job Summary: The Logistics Operator will perform forklift duties up to and including loading, unloading and moving materials within or near the plant, yard or workstations. Requirements Duties and Responsibilities: Follow procedures for the most efficient operation of his/her area to best achieve the desired results and to maximize productivity Coordinate inbound and outbound shipments with Operations and Customer Service. Manages the functions related to receiving incoming freight and packages, inspect, record and approve loads per ISO policies. Prepare shipping documents for domestic and international shipments including but not limited to packing list, Bill of lading. Keeps operators and their supervisors aware of all critical shortages to alleviate any potential production downtime Ensure that feedstock / finished goods have been allocated correctly in the area and are organized and identified properly. Perform cycle counts and physical inventory of packaging material. Check all transactions in the area to minimize errors and to ensure inventory balance integrity while making material balance adjustments, if needed. Communicate effectively with production, quality control, data control, maintenance, planning, purchasing, traffic, and all material supervisors. Review problems with superiors and reports daily progress in carrying out departmental policies and programs Maintain good housekeeping, material identification and organization in and around the warehouse and dock. Support process improvement activities. Other duties may be assigned, including but not limited to assisting production when needed. Preferred Experience and Qualifications: Ability to handle multiple tasks simultaneously and prioritize daily workload. Able to safely and efficiently operate forklifts and power jack lift Licensed for sit down / counterbalance forklift operations Ability to multitask and prioritize tasks to handle multiple priorities in a fast pace environment. Work Environment: requires working inside (some areas not temperature controlled) and outside all year round. The environment is industrial and can be loud at times. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of a manufacturing job. This role requires ability to wear Personal Protective Equipment (safety glasses, safety shoes) always in the production area. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Minimum Years of Experience Required One (1) - Three (3) Years' Experience Salary Description $20/hour

Employee Value Proposition Working for a world-class leader in building structures and bridges, a Schuff Steel HMO-A brings his/her expertise and knowledge in fabrication to build some of the most complex and high-profile projects in the commercial building, bridge and industrial sectors. Critical to the field of forming material by operation of CNC machines and equipment such as Plasma Arc, NC Punch Plasma, Beam Line Machine, Beam Punch Operator and NC Angle Master. Also operates machines under HMO B and C classification. The HMO-A utilizes a high degree of proficiency while utilizing full skills of the trade including knowledge and understanding of CNC machine programs. To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily. In return, the Company will offer competitive market-based compensation and comprehensive health insurance benefits. We are committed to professional development and growing our business. We are looking for a professional with a growth mindset who desires a progressive long-term career. Core Responsibilities Layout, read, interpret blueprints, shop drawings and other company documents. Operates heavy steel fabrication machinery according to company requirements. Load and unload equipment with material manually and through the use of an overhead crane or magnet. Perform daily preventative maintenance. Troubleshoot, properly mark and stamp materials. Perform daily cleaning of machines. Locate parts and supplies for machine operation and grind material. Other duties may be assigned. Perform other routine duties per management direction. Must adhere to and follow all safety rules and PPE requirements Education/Training - Work Experience High school diploma or general education degree (GED), and/or 12 months experience; completion of a closely related vocational training course through an accredited school may substitute for the required experience Specialized Knowledge - Certificates & Licenses Equipment Knowledge & Skills - includes the operation of CNC machines and equipment such as Plasma Arc, NC Punch Plasma, Beam Line Machine, Beam Punch Operator and NC Angle Master. Also operates machines under HMO B and C Classification. Overhead cranes and forklifts Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: None DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan *Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at **************. Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.

Join MAPEI Corporation, a global leader in the manufacturing of construction chemicals and building materials, including adhesives, sealants, and specialty products used in flooring, tile, and concrete restoration. As a Warehouse Operator, you will play a critical role in supporting our operations by managing inventory, preparing shipments, and ensuring efficient warehouse operations. This role requires attention to detail, a strong commitment to safety, and the ability to work in a fast-paced environment to help MAPEI meet its production and distribution goals. Key Responsibilities: Pull and prepare orders while maintaining an organized shipping and receiving area. Process inbound and outbound shipments and verify accuracy against documents. Load and unload pallets and containers safely and efficiently. Pack shipping containers and product bags according to order specifications. Ensure accurate inventory counts and track orders to maintain proper documentation. Sort and organize materials on racks, shelves, or bins based on size, type, and product code. Operate various types of warehouse equipment, including sit-down, stand-up, cherry-pickers, clamp, and reach forklifts. Coordinate and document shipments, including preparing Bills of Lading and tracking records. Report any discrepancies or quality concerns to supervisors promptly. Maintain a clean, organized, and safe warehouse environment, adhering to all safety regulations and protocols. Perform additional duties as required. Position Specific Details: Base hourly payrate up to $19.50 p/hr, based on experience. Additional premium shift differential: $1.00 p/hr for 2nd shift and $2.00 p/hr for 3rd shift, if applicable. What's in it for you: Highly competitive base pay & premium shift differentials. Biannual "Rewards for Results" bonuses, awarded on discretion based on plant performance. FREE MEDICAL INSURANCE for our employees or the option of a highly competitive medical plan with minimal monthly employee contributions. 17 Days of paid, sick and vacation time annually (days are prorated in year one). 401K retirement with up to 6% matching program. Excellent dental, vision programs, flex spending accounts, employer paid life insurance and free tele-med physician services. Various other company employee-centric perks initiatives; tuition reimbursement programs, discounted home/auto insurance programs, supplemental life insurance, and more. Qualifications: High school diploma or GED required. Experience in a warehouse, manufacturing, or logistics environment preferred. Forklift certification is a plus. Strong organizational skills and attention to detail. Ability to lift up to 55 lbs. independently; and up to 100 lbs. with assistance. Ability to stand for extended periods and work in a fast-paced environment. Flexibility for overtime and shift hours as required. Equal Opportunity Employer - Minority/Female/Disability/Veteran (M/F/D/V) MAPEIP2

We are Engineered to Serve. Tindall Corporation is a leading Precast Concrete Manufacturer, with locations throughout the Southeastern U.S. Our mission is to support our customers, create remarkable structures, and deliver never-before-seen solutions every step of the way. Our employees enjoy benefits including: Low Cost Employee Health plan, Dental, Vision, STD/LTD, Fully-paid Basic Life, Voluntary Life, Whole Life, Accident, Hospitalization, Critical Illness, EAP and a 401k Plan with Company Match & Profit Sharing. Summary of Primary Functions: Haul materials and supplies with a lift truck (Bobcat) that are too heavy or too bulky to be handled manually. Maintain general housekeeping of plant. Essential Duties and Responsibilities: All employees are required to follow all Safety and Quality rules and processes to ensure a safe working environment, and the production of high-quality products. Operate Bobcat to deliver Styrofoam insulation, wood and steel forms, and other bulky materials to production beds as needed. Load strand cages and move to beds and pull wire wagon alongside production beds as needed. Transport vibratracs to and from bed and scrape area outside QC Lab daily. Wash screeds daily. Clean production areas using scrape bucket and power sweeper. Off load trucks for Material Control as needed. Dump trash, waste materials, etc. from dumpsters daily; dispose of piled trash, wood, insulation, strands, rubble, etc. Pull magnet through roadways daily or as weather permits. Perform miscellaneous duties as directed by Supervisor. Job Specifications or Qualifications: Certificates, Licenses, Registration: Certified in AWS Positions: SMAW-3F and SMAW-4F, and a valid driver's license. Education and/or Experience: High School Diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Hourly Rate: $18 -$20/hour + Monthly incentive bonus after 90 days of employment. Shift: Monday - Friday, 7:00 a.m. - 4:00 p.m. The Material Handler/Delivery Driver is primarily responsible for fulfilling orders, assisting with organizing and maintaining existing inventory, unloading delivery trucks and putting away stock. This position also acts as a Driver and is responsible for loading trucks and making safe, friendly and timely deliveries to customers. Responsibilities: Duties Material Handler: Locates material and pulls orders using established RF/warehouse procedures to fulfill orders; Responsible for unloading product (using both a forklift and hand loading) and putting away product accurately to designated areas within the warehouse; Checks in any incoming product using established RF/warehouse procedures for receiving, ensuring deliveries match the company purchase order; Meets or exceeds established goals for order pulling accuracy and inventory accuracy; Performs any necessary activities to get products ready for staging such as accurate labeling and wrapping ; Preps and assembles products as needed for custom non stock orders; Ability to operate equipment and machinery related to position such as a forklift; Assists with maintaining the warehouse in an orderly and clean state, and complies with all company safety procedures; Continues any relevant RF training or operations training as assigned by the Company. Delivery Driver: Operates Company vehicle safely and courteously while following the rules of the road. Verifies the daily preventative maintenance of the vehicle and report any problems with the vehicle to the Warehouse Manager. Interior of the trucks must be kept clean, organized, and safely maintained. Complies with all DOT requirements and company policy regarding safety and compliance; Pre-plans deliveries and routes to ensure maximum efficiency and timing deadlines; Manifests jobs in the sequence of order delivery to ensure prompt notifications to our customers; Compares paperwork with product on truck to ensure accuracy of orders; Inspects and secures all loads on truck; Responsible for loading product (using both a forklift and hand loading) onto trucks, including items such as boxes, ladders, strut, etc. Responsible for hand unloading and delivering products/orders to specified job sites as part of a multi-stop route; Taking pictures of deliveries made using Innovo phone app. Makes note of any discrepancies and report them to the Warehouse Manager as soon as possible. Responsible for promptly picking up any return product (as needed) and ensuring that the product is delivered to the appropriate department for processing. Qualifications Skills: Technical Qualifications/Experience A minimum of one year experience in a similar position is preferred; Experience with RF devices is a plus; Experience with forklift and ability to maintain forklift certification; Clean driving record and the ability to drive a range of vehicles, from small pick-up truck to 2- ton/5-speed flatbed diesel truck; Must be 21 years of age to meet auto insurance requirements. Strong attention to detail; Strong organizational skills and ability to maintain accurate records; Strong communication skills; Able to work independently with minimal supervision; Ability to interact with employees, customers and vendors in a professional manner; Understanding of safe warehouse practices; Self-disciplined and capable of identifying and completing critical tasks independently and with a sense of urgency. Physical Requirements: The employee is regularly required to sit; walk; use hands to finger, handle, or feel a computer mouse or other computer equipment; reach with hands and arms; talk and hear; use hands and arms to reach for, grasp and manipulate objects; stand, climb or balance and stoop, kneel, crouch, or crawl; May be required to move or traverse considerable distances in the facility during the course of a workday; Must have the physical abilities to perform essential warehouse tasks; Must have good physical fitness with the ability to lift up to 50 lbs. to a height of 3-4 feet and load product into trucks; Must be able to remain in a stationary position for an extended period of time; Ability to ascend/descend a ladder to pull or put away product from shelving and racking; Ability to safely operate a dolly, pallet jack and/or forklift in loading and unloading supplies. Working Conditions: All weather driving; Construction job sites; Warehouse environment. Requirements: Acme Construction Supply hires the highest quality individuals to serve our customers. Therefore, candidates will be required to pass a drug test and criminal background check. The screening will be conducted in compliance with our Drug-Free Workplace Policy which will be provided to all applicants. Acme Construction Supply is an Equal Opportunity Employer

Hourly Rate: $19-$21/hour + Monthly incentive bonus after 90 days of employment. Shift: Monday-Friday, 7:30 a.m. - 4:30 p.m. The Material Handler/Delivery Driver is primarily responsible for fulfilling orders, assisting with organizing and maintaining existing inventory, unloading delivery trucks and putting away stock. This position also acts as a Driver and is responsible for loading trucks and making safe, friendly and timely deliveries to customers. Responsibilities: Duties Material Handler: Locates material and pulls orders using established RF/warehouse procedures to fulfill orders; Responsible for unloading product (using both a forklift and hand loading) and putting away product accurately to designated areas within the warehouse; Checks in any incoming product using established RF/warehouse procedures for receiving, ensuring deliveries match the company purchase order; Meets or exceeds established goals for order pulling accuracy and inventory accuracy; Performs any necessary activities to get products ready for staging such as accurate labeling and wrapping ; Preps and assembles products as needed for custom non stock orders; Ability to operate equipment and machinery related to position such as a forklift; Assists with maintaining the warehouse in an orderly and clean state, and complies with all company safety procedures; Continues any relevant RF training or operations training as assigned by the Company. Delivery Driver: Operates Company vehicle safely and courteously while following the rules of the road. Verifies the daily preventative maintenance of the vehicle and report any problems with the vehicle to the Warehouse Manager. Interior of the trucks must be kept clean, organized, and safely maintained. Complies with all DOT requirements and company policy regarding safety and compliance; Pre-plans deliveries and routes to ensure maximum efficiency and timing deadlines; Manifests jobs in the sequence of order delivery to ensure prompt notifications to our customers; Compares paperwork with product on truck to ensure accuracy of orders; Inspects and secures all loads on truck; Responsible for loading product (using both a forklift and hand loading) onto trucks, including items such as boxes, ladders, strut, etc. Responsible for hand unloading and delivering products/orders to specified job sites as part of a multi-stop route; Taking pictures of deliveries made using Innovo phone app. Makes note of any discrepancies and report them to the Warehouse Manager as soon as possible. Responsible for promptly picking up any return product (as needed) and ensuring that the product is delivered to the appropriate department for processing. Qualifications Skills: Technical Qualifications/Experience A minimum of one year experience in a similar position is preferred; Experience with RF devices is a plus; Experience with forklift and ability to maintain forklift certification; Clean driving record and the ability to drive a range of vehicles, from small pick-up truck to 2- ton/5-speed flatbed diesel truck; Must be 21 years of age to meet auto insurance requirements. Strong attention to detail; Strong organizational skills and ability to maintain accurate records; Strong communication skills; Able to work independently with minimal supervision; Ability to interact with employees, customers and vendors in a professional manner; Understanding of safe warehouse practices; Self-disciplined and capable of identifying and completing critical tasks independently and with a sense of urgency. Physical Requirements: The employee is regularly required to sit; walk; use hands to finger, handle, or feel a computer mouse or other computer equipment; reach with hands and arms; talk and hear; use hands and arms to reach for, grasp and manipulate objects; stand, climb or balance and stoop, kneel, crouch, or crawl; May be required to move or traverse considerable distances in the facility during the course of a workday; Must have the physical abilities to perform essential warehouse tasks; Must have good physical fitness with the ability to lift up to 50 lbs. to a height of 3-4 feet and load product into trucks; Must be able to remain in a stationary position for an extended period of time; Ability to ascend/descend a ladder to pull or put away product from shelving and racking; Ability to safely operate a dolly, pallet jack and/or forklift in loading and unloading supplies. Working Conditions: All weather driving; Construction job sites; Warehouse environment. Requirements: Acme Construction Supply hires the highest quality individuals to serve our customers. Therefore, candidates will be required to pass a drug test and criminal background check. The screening will be conducted in compliance with our Drug-Free Workplace Policy which will be provided to all applicants. Acme Construction Supply is an Equal Opportunity Employer

Arrow Electronics | Reno, NV Shift: 8:30AM - 5:00PM, Monday-Friday. Hourly Rate: $20.00 Hourly Pay: up to $22.50 for hours worked between 6:00 PM - 6:00 AM. Overtime: Regular OT and occasional Saturdays as needed. Arrow Electronics is looking for motivated and reliable team members to join our fast-paced electronics repair and processing facility. We offer steady employment, solid pay, excellent benefits, and opportunities for growth. If you enjoy staying active, hands-on operational tasks, and being part of a strong team, this role is for you. The Material Handler/Forklift Driver is responsible for moving assets/materials safely using power industrial trucks and is expected to move material on foot or utilizing powered equipment. This position supports the operation by working in one or more of the following areas: receiving, storing, picking and shipping. Operation of Order Picker, Reach lift, and/or Stand-up/Sit-down lift. What You'll Be Doing: Responsible for labor distribution and workflow to ensure quality and production goals are met Support one or more departments: storing, receiving, space management Transport/staging/storing of product Maintain work and product store areas Must be experienced with operating an order picker and reach truck forklift This position requires use of handheld and/or tablet Ensure compliance with OSHA regulations, company policies and procedures Ensure quantity, quality, and accuracy of throughput Ensure equipment is in safe operating condition by appropriate equipment inspections What We Are Looking For: 1-3 years of relevant work experience Ability to regularly operate a computer for basic functions Ability to operate an order picker and reach truck forklift Collaborate with team members, leads, and supervisors to contribute to department-wide production & quality goals Must be comfortable working under high productivity and quality standards You absolutely must be able to work well in a team-environment and will also have opportunity as an individual contributor Impeccable attendance is required Be available to work a flexible work schedule as needed during overtime requirements Maintain a safe work environment by following established safety procedures Maintain organization, cleanliness, and 5S standards within facility and daily workspace. What's In It For You: At Arrow, we recognize that financial rewards and great benefits are important aspects of an ideal job. That's why we offer competitive financial compensation, including various compensation plans and a solid benefits package. Medical, Dental, Vision Insurance 401k, With Matching Contributions Paid Time Off (including sick, holiday, vacation, etc.) Health Savings Account (HSA)/Health Reimbursement Account (HRA) Options Growth Opportunities Tuition Reimbursement Short-Term/Long-Term Disability Insurance Climate controlled environment with excellent break room facilities Located in central Reno, near public transportation (RTC Route 56) And more! #LI-AM2 Annual Hiring Range/Hourly Rate: $20.00 Actual compensation offer to candidate may vary from posted hiring range based upon geographic location, work experience, education, and/or skill level. The pay ratio between base pay and target incentive (if applicable) will be finalized at offer. Internal candidates who have current pay within or above the hiring range are still encouraged to apply if interested. Location:US-NV-Reno, Nevada (Reno II) Time Type:Full time Job Category:Supply Chain ServicesEEO Statement: Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. (Arrow EEO/AAP policy) We anticipate this requisition will be open for a minimum of five days, though it may be open for a longer period of time. We encourage your prompt application.

Arrow Electronics | Reno, NV Shift: 12:00 AM - 8:30 AM, Monday-Friday. Hourly Rate: $20.00 USD Hourly Pay: up to $22.50 USD for hours worked between 6:00 PM - 6:00 AM. Overtime: Regular OT and occasional Saturdays as needed. Arrow Electronics is looking for motivated and reliable team members to join our fast-paced electronics repair and processing facility. We offer steady employment, solid pay, excellent benefits, and opportunities for growth. If you enjoy staying active, hands-on operational tasks, and being part of a strong team, this role is for you. What You'll Be Doing: Responsible for labor distribution and workflow to ensure quality and production goals are met Support one or more departments: storing, receiving, space management Transport/staging/storing of product Maintain work and product store areas What We Are Looking For: Proven experience operating forklifts or similar equipment (reach truck or order picker). Strong attention to detail to ensure accuracy in material handling and documentation. Prior warehouse experience with knowledge of inventory processes and procedures. Ability to follow safety regulations and work efficiently in a fast-paced environment. Able to lift up to 50 lbs and stand for considerable lengths of time. What's In It For You: At Arrow, we recognize that financial rewards and great benefits are important aspects of an ideal job. That's why we offer competitive financial compensation, including various compensation plans and a solid benefits package. Are you being referred to one of our roles? If so, ask your connection at Arrow about our Employee Referral Process. Medical, Dental, Vision Insurance 401k, With Matching Contributions Paid Time Off (including sick, holiday, vacation, etc.) Health Savings Account (HSA)/Health Reimbursement Account (HRA) Options Growth Opportunities Tuition Reimbursement Short-Term/Long-Term Disability Insurance Climate controlled environment with excellent break room facilities Located in central Reno, near public transportation (RTC Route 56) And more! #LI-JB1 Location:US-NV-Reno, Nevada (Maestro Dr) Time Type:Full time Job Category:Supply Chain ServicesEEO Statement: Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. (Arrow EEO/AAP policy) We anticipate this requisition will be open for a minimum of five days, though it may be open for a longer period of time. We encourage your prompt application.

Darragh is a fourth-generation, family-owned and operated company that originated in Arkansas. Darragh is known for fostering career growth while maintaining a welcoming, family-oriented atmosphere. Professionals across Arkansas and the surrounding states have trusted us for top-quality building materials and expert guidance since 1906. Professionals continue to rely on us to provide exceptional customer service and products. At Darragh, our core focus is good people doing good business and helping professional contractors succeed. If you are looking for a company with values and work-life balance, this opportunity could be just what you are looking for. Summary You will be responsible for loading/unloading materials within or near facility, yard, or worksite. You will utilize a Class 6 straight truck or Class 3 with trailer to transport and deliver products when needed. Knowledge of the construction industry and concrete services a plus. Essential Duties and Responsibilities Assembles and fills orders for shipment to customers then reviews all orders to ensure picking accuracy. Pulls and assembles orders for will call customers quickly, accurately, courteously, and respectfully. Loads materials onto pallets or into crates that contain products for transfer to all locations and installs strapping, bracing, or padding to prevent shifting or damage in transit. Safely assist in the loading and unloading of the product to customers' location and return products. Report any problems that occur with a customer if possible before leaving the delivery location. General Housekeeping of branch warehouse and yard to keep clean and in orderly fashion. The job description and responsibilities described are intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. Qualifications Qualifications High School diploma or GED and one to three months experience; or combination of education and training or experience. Must have an acceptable Motor Vehicle Record. Driving experience with Class 6 straight truck including winter driving experience preferred but not required. Valid driver's license and DOT Medical Health card required , Forklift certification a plus. Must be able to lift 50 pounds by hand and up to 75 pounds with help. Working knowledge of computer software such as email and order processing systems. Benefits Paid Time Off and 7 company paid holiday's a year. Generous benefits package that includes health insurance with a portion company paid, dental vision, disability insurance, and many more. 401k with a generous matching program. Employee product discount. Paid training. Employee Referral Program. Education Assistance Program. Safety rewards program. We offer training and professional development opportunities for all our employees. If you are looking for a career and not just a job, visit ******************************* Equal Opportunity Employer (EOE); Minority/Female/Disabled/Veteran (M/F/D/V; Drug Free Workplace (DFW) #ZR