Packaging Corporation of America jobs in Denver, CO - 20 jobs

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People • Customers • Trust Under the general direction of the Production Manager, the Production Superintendent provides general supervision for production, shipping, and other related functions as assigned. The Production Superintendent administers established policies and procedures to achieve maximum plant effectiveness ad to relieve the Production Manager of operating detail. The Production Superintendent is responsible for effectively leading a production team in the efficient and safe production of corrugated products. As a member of the plant management team, the Production Superintendent is responsible for evaluating opportunities to improve overall plant performance and profitability. PRINCIPLE ACCOUNTABILITIES: Coordinate activity with the production manager to plan and manage daily and weekly schedules to meet production goals, prioritize work orders, maintain quality requirements, and assure an even flow of work through all the departments with to increase up-time and minimize unscheduled downtime. Maintain a clean, safe and injury-free work environment by ensuring health and safety procedures are understood and executed by all employees. Assist the Production Manager in enforce health, safety, environmental, quality, and continual improvement standards as set by the corporation and by local, state, and federal regulations. Oversee the daily operations of the maintenance department including predictive and preventative maintenance, planned shutdowns, and clean-up and installation of new equipment. Identify staffing needs, hire competent individuals, conduct employee trainings, oversee employee performance, and manage any disciplinary or termination situations. Conduct employee training on all equipment, protocols, production standards, safety regulations, and waste control on an ongoing basis. Analyze production performance, identify opportunities, make recommendations for process and equipment improvement, establish and execute goals. Direct and coordinate all production planning activities including production scheduling and processing, managing inventory, product delivery, and trimming the corrugator to minimizing waste. Ensure predictive and preventive maintenance programs are accomplished and repairs are completed on a timely basis so that productions and profitability objectives are met. Conduct plant production meetings. BASIC QUALIFICATIONS: Bachelor's degree. 7+ years' of previous experience in corrugated manufacturing industry. 5+ years' previous experience in a supervisory capacity at a corrugated manufacturing facility. Previous experience in coaching, training, teambuilding, performance development, and conflict resolution. Established knowledge of corrugated and packaging manufacturing machinery, concepts, practices, and procedures including continual improvement processes and safety practices. Working knowledge of computer systems including experience with Microsoft Word, Excel, and Outlook software as well as experience with manufacturing systems including shop floor software. Previous work experience as a member of a team, or a strong understanding of the importance of open communication and information sharing between team members. Ability to work flexible hours as needed. Must be authorized to work in the U.S. PREFERRED QUALIFICATIONS: Bachelor's degree in business, engineering, or electrical engineering. KNOWLEDGE, SKILLS & ABILITIES: Strong interpersonal skills to effectively lead and communicate with production team and management. Strong verbal and written communication skills with the ability to effectively communicate with individuals throughout the company on departmental procedures, policies, practices, and requests for information. Strong listening, evaluating, and problem solving skills. Ability to create alternative solutions and meet deadlines. Strong organizational skills with the ability to handle numerous details, deadlines, and requests. Strong analytical, mechanical and mathematical skills with the ability to see and establish patterns. Ability to work in a fast paced, deadline-oriented environment, prioritize assignments, and handle multiple projects and/or requests concurrently. Compensation and Benefits Starting salary range for position: $96,000 - $135,000. Bonus: Annual - Based upon individual contribution and overall, Company performance. Paid Vacation: Three (3) weeks per calendar year. Pro-rata Vacation during the initial year of hire based upon start date within the calendar year. Paid Holidays. Within the first 30 days of employment, an employee (and their dependents) is eligible to enroll in certain benefit coverages -- medical, dental, and vision - and are automatically enrolled in life, AD&D, and disability coverages. Upon hire, an employee is automatically enrolled in the 401k plan. The plan offers both pre-tax and Roth contribution options along with employer provided matching contributions. Disclaimer: The Compensation and Benefits information in this posting represents PCA's good faith and reasonable estimate of what it may pay for this position. The Company reserves the right to modify this information at any time, subject to applicable law. PCA is an Equal Opportunity Employer Qualified Applicants must apply at careers.packagingcorp.com to be considered.

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People • Customers • Trust RESPONSIBILITIES: Ensure that the product is moved from the truck to the staging area in a safe and efficient manner. Maintain and perform daily safety inspections of the clamp truck and maintain a clean and safe work environment. Perform lockout/tag out procedures on trailers. Maintain good housekeeping and manufacturing practices at all times. Pick and stage orders and load and unload trucks, while maintaining inventory integrity through proper handling and storage. BASIC QUALIFICATIONS: High School Graduate or GED. Successful candidate must be willing to work ANY shift. Certified industrial forklift driver or ability to get certified in a timely manner. 6 months forklift operator experience. Must be authorized to work in the U.S. PREFERRED QUALIFICATIONS: Experience in a packaging or other manufacturing environment. All qualified applicants must apply at Careers.packagingcorp.com to be considered. PCA is an Equal Opportunity Employer - Veterans/Disabled and other protected categories.

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People • Customers • Trust Maintenance Technician Packaging Corporation of America Pay and Benefits Pay Range = $26.50-$39.60 based on mechanical and electrical skills and experience. Excellent Benefits Package (Health, Dental, Optometry) 401K Plan with company match 1.5 Pay over 8 hrs. and over 40 1.5 Pay Saturday and Sunday 1.5 Pay Holidays + additional OT over 8 hours on holidays PCA provides paid training to help technicians advance through the skill levels and achieve higher pay. Technicians supply their own basic hand tools. PCA provides a tool stipend (or replacement) to help technicians maintain basic hand tools. PCA provides all special and heavy tools. PCA provides Safety shoes and Safety Glass stipends PCA provides Uniforms for Maintenance Technicians Responsibilities This position will perform a variety of maintenance tasks including diagnosing, repairing, rebuilding, or replacing mechanical, electrical, hydraulic, and Pneumatic systems on plant equipment. Technicians work as part of a team to safely perform Preventive Maintenance Activities as well as answer break down calls in a Production Environment. All Maintenance Technician positions are multicraft and training is provided to develop these skills. Basic Qualifications 2+ Years' experience in successfully troubleshooting and repairing industrial machinery. A Technical Degree in the Mechanical or Electrical Trades is a plus. The production schedule is 3 shifts. Maintenance Technicians are placed on shifts according to plant needs and seniority. Opportunities to change shifts are available when organization changes occur or production schedules change. Be Authorized to work in the US. Experience in the Corrugated Packaging or Printing Industry is a plus. All applicants must apply at Careers.packagingcorp.com to be considered. All qualified applicants must apply at Careers.packagingcorp.com to be considered. PCA is an Equal Opportunity Employer - Veterans/Disabled and other protected categories.

The Senior Customer Service Representative is responsible for providing superior service to customers. This includes responding to customer inquiries regarding product availability, pricing, freight rates, allocations, and delivery dates, receiving new orders, and monitoring status of current orders. Additionally, the Senior Customer Service Representative is responsible for resolving complaints and requests for billing adjustments. The Senior Customer Service Representative normally handles larger and more complicated customer accounts and orders. PRINCIPLE ACCOUNTABILITIES: Receive, process, and track assigned orders through to scheduling. Consult with various internal departments to ensure order completeness, on-time delivery and accurate invoicing. Communicate significant information regarding customer accounts/orders to appropriate internal departments including ensuring Sales Representatives are informed of pertinent activity regarding individual accounts. Coordinate customer requests for product specifications, availability, shipping, quotations and estimates, samples. Serve as a link between the customer and the design, sales and production teams to meet customer requirements including scheduling production, securing delivery dates, addressing order changes, and resolving complaints. Maintain organized customer files. Investigate and resolve customer complaints including billing issues and escalates to Manager or appropriate internal departments when needed. Manage on-hand inventory levels and reconciles to customer orders, forecasts and just in time schedules; this includes taking physical inventory at month end. May provide direction and support to other customer service representatives and/or provide back up to Customer Service Manager as needed. BASIC REQUIREMENTS: Education equivalent to high school diploma required. Five (5) years' previous work experience in a customer service role with experience handling customer orders on an order entry system, and maintaining / building strong positive customer business relationships. Strong working knowledge of computer systems including experience with Microsoft Word, Excel, and Outlook PREFERRED REQUIREMENTS: Associates degree or college accounting coursework. Two (2) years' previous work experience in the manufacturing sector, containerboard and corrugated packaging industry. Previous experience using an automated order entry system. KNOWLEDGE, SKILLS & ABILITIES: Strong attention to meeting and exceeding customer expectations. The ability to network and build relationships with individuals of various experience and corporate positions. Strong active listening and evaluating skills. Strong analytical skills with the ability to handle detail oriented tasks and review multiple documents and reports. Able to work in a fast paced, deadline-oriented environment, prioritize assignments, and handle multiple tasks. Above average written and verbal communication skills with the ability to communicate to multiple audiences and purposes, and to effectively communicate with customers over the phone. Strong organizational skills with the ability to handle numerous details, deadlines, and requests. Previous experience working in a team environment preferred, or a strong understanding of the importance of open communication and information sharing among co-workers. Able to work flexible hours or overtime as needed.

At Packaging Corporation of America (PCA), we think of ourselves as more than a box manufacturer. We are an ideas and solutions company. We seek to be the leader in helping our customers - large and small - package, transport and display products of all kinds. It just happens to be that corrugated products are our area of expertise. At PCA, you'll find the best people in the industry operating in a "golden rule" culture. We actively promote mutually rewarding relationships with each other and our customers by advocating respect for every individual, ethical and fair practices, and the highest standards in what we say and do. PCA is proud to have a highly skilled and experienced team leading the way. As a Fortune 500 company and one of the largest producers of containerboard and corrugated packaging products in the U.S., PCA offers customers broad expertise and economies of scale, while our multiple plant locations let us rapidly meet the local needs of our customers. Principle Accountabilities: Work closely with the Area Controller in order to proactively provide information that will help the plant increase revenue and improve profitability, as well as respond to specific requests from the management team. Perform monthly analysis and reporting of financial performance. Understand and communicate revenue details, product and customer profitability reporting, financial analysis of proposed products, and customers and business models. Provide pricing and sourcing recommendations regarding accounts payable, invoicing, payroll, and general ledger. Basic Qualifications: Bachelor's degree in accounting 1-5 years of experience Strong analytical, communication, and advocacy skills. Strong understanding of accounting principles, theories, concepts, and practices. Ability to work both independently and in a team environment. Previous experience using Microsoft Excel, Outlook, PowerPoint, and Word. Ability to travel 25%. Authorized to work in the U.S. Preferred Qualifications: Manufacturing experience is a plus. Knowledge-Skills-Abilities Ability to work well under pressure and within time constraints, multi-task, and build sound relationships with both internal and external customers. Excellent communication, analytical, organizational and computer skills. Ability to independently make sound decisions through creative problem-solving. Must be capable of working with ambiguity and change. PCA is an Equal Opportunity Employer - Veterans/Disabled and all other protected classes.

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People • Customers • Trust RESPONSIBILITIES: Work as part of a team in support of a manufacturing operation with a goal of increasing productivity; decreasing downtime and waste. Receive and follow directions from the Operator and/or Supervisor. Assist machine operator to set up orders, mount printing and cutting dies, ink adjustments, and ensure quality checks are performed before, during and upon completion of each order. Inspect machine during run and notify Operator when acceptable parts are not being produced. Assist in cleanup of equipment. Follow all company safety rules and lock-out tag-out procedures. Maintain shop and shop equipment per 5S Standards. Other duties as assigned. BASIC QUALIFICATIONS: High School Graduate or GED. Passionate about maintaining a safe work environment. Ability to stack parts up to 30 lbs. for a period of up to 12 hours. Ability to work any shift, overtime and weekends, as needed. Must be authorized to work in the U.S. KNOWLEDGE, SKILLS & ABILITIES: Must be willing to work closely on a day-to-day basis with other production personnel. Ability to share ideas with others to solve problems of essential importance. All qualified applicants must apply at Careers.packagingcorp.com to be considered. PCA is an Equal Opportunity Employer - Veterans/Disabled and other protected categories.

The Customer Service Representative is responsible for providing superior service to customers. This includes responding to customer inquiries regarding product availability, pricing, freight rates, allocations, delivery dates, receiving new orders, and monitoring status of current orders. Additionally, the Customer Service Representative is responsible for resolving complaints and requests for billing adjustments. PRINCIPLE ACCOUNTABILITIES: Receive, process, and track assigned orders through to scheduling. Consult with various internal departments to ensure order completeness, on-time delivery and accurate invoicing. Communicate significant information regarding customer accounts/orders to appropriate internal departments including ensuring Sales Representatives are informed of pertinent activity regarding individual accounts. Coordinate customer requests for product specifications, availability, shipping, quotations and estimates, samples. Serve as a link between the customer and the design, sales and production teams to meet customer requirements including scheduling production, securing delivery dates, addressing order changes, and resolving complaints. Maintain organized customer files. Investigate and resolve customer complaints including billing issues and escalates to manager or appropriate internal departments when needed. Manage on-hand inventory levels and reconcile to customer orders, forecast and just in time schedules; this includes taking physical inventory at month end. BASIC REQUIREMENTS: Education equivalent to high school diploma required. Two (2) years' previous work experience in a customer service role with experience handling customer orders on an order entry system, and maintaining / building strong positive customer business relationships. Strong working knowledge of computer systems including experience with experience with Microsoft Word, Excel, and Outlook. PREFERRED REQUIREMENTS: Associates degree or college business coursework. Previous experience using automated order entry system. Previous experience in the manufacturing sector, containerboard and corrugated packaging industry. KNOWLEDGE, SKILLS & ABILITIES: Strong attention to meeting and exceeding customer expectations. The ability to network and build relationships with individuals of various experience and corporate positions. Strong active listening and evaluating skills. Strong analytical skills with the ability to handle detail oriented tasks and review multiple documents and reports. Able to work in a fast paced, deadline-oriented environment and handle multiple requests simultaneously. Above average written and verbal communication skills with the ability to communicate to multiple audiences and purposes, and to effectively communicate with customers over the phone. Strong organizational skills with the ability to handle numerous details, deadlines, and requests. Previous experience working in a team environment preferred, or a strong understanding of the importance of open communication and information sharing among co-workers. Able to work flexible hours or overtime as needed.

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People • Customers • Trust RESPONSIBILITIES: Works as part of the production crew with a main focus on preparing the machine for the production run, according to the customer order. Prepares the stencil that stamps the product with identification. Cleans and oils the machine daily. Orders pallets from the Forklift Driver, according to the need expressed on the schedule. Responsible for having pallets at the machine for the finished products. Assists with running orders when the machine is ready by watching the run continue smoothly and without problem. If a problem arises, such as machine failure, product quality is not to standard, or a shortage of paper, this individual notifies the operator of the problem. May need to work with management, maintenance, and other company employees to fix the problem. Palletizes the product according to the shop card and/or in a manner suitable for shipping. May be required to feed the machine on occasion. Responsible for adhering to the ISO procedures and taking direction from the operator. Works with various production machines and basic tools such as hammer and knife. BASIC QUALIFICATIONS: High School Graduate or GED. Ability to read and comprehend simple instructions, such as schedules and orders. Must be willing to work any shift and overtime on short notice, including weekends Ability to work in manufacturing environment, with varying temperatures based on season, around machinery, and heavy Forklift traffic. Must be authorized to work in the U.S. PREFERRED QUALIFICATIONS: 1 + year of experience in a packaging or other manufacturing environment. All qualified applicants must apply at Careers.packagingcorp.com to be considered. PCA is an Equal Opportunity Employer - Veterans/Disabled and other protected categories.

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People • Customers • Trust Principle Accountabilities: Set-up rails, print, and die cut section on Flexo accurately in accordance with proper setup techniques. Inspect all dies before and after run to ensure that any necessary repairs are made before the next run. Ensure all bolts for cutting dies are in place and tightly secured. Monitor box quality, including, but not limited to, loose liner, warp, correct size, and print. Check rolls for damage. Maximize the utilization of equipment by operating the machinery at available capacity and speed. Assist Operator, Assistant Operator and Utility with job duties on the machine. Complete necessary reports in an accurate and timely manner, including but not limited to: Production Data Machine Operational Status, Safety Data, Quality Data. Turn in maintenance work orders to supervision for needed repairs. Comply with all company policies and procedures, including safety and maintaining good housekeeping. Adhere to production schedule and make recommendations for optimizing the schedule to meet cost, quality and service goals. Report any unusual scheduling issues to Supervisor. Basic Qualifications: High school diploma/GED. Ability and willingness to work any shift and overtime on short notice, both during the week and weekends. Ability to work in manufacturing environment, with varying temperatures. Must be authorized to work in the U.S. Preferred Qualifications: Experience in a packaging or other manufacturing environment. 6 months experience working on a Flexo machine. Knowledge, Skills & Abilities: Ability to work in a fast-paced environment and handle multiple requests simultaneously. Ability to work within a team and effectively communicate with members. All qualified applicants must apply at Careers.packagingcorp.com to be considered. PCA is an Equal Opportunity Employer - Veterans/Disabled and other protected categories.

Primary duties include safely performing a wide range of tasks that include stacking corrugated product, conducting quality checks, material set-up, and maintaining a clean and organized workspace. The ideal candidate will have a strong commitment to working safe, demonstrated the ability to work in a fast paced environment, a strong desire to learn manufacturing processes and operating complex machinery and have a desire to advance within the company. Responsibilities: * Ability to operate various manufacturing equipment, follow specific direction, operate power hand tools, and other duties as assigned. * Maintain a clean work environment. * Ability to read a tape measure and have basic math and computer skills. * Ability to work safely and comply with all safety regulations. * Ability to lift, push or pull 50lbs, navigate stairs, stand, walk, bend, and kneel throughout the entire shift. * Must be able to work daily overtime, weekend work and various shifts depending on your position. Preferred Qualifications: * Experience working in a fast-paced, manufacturing environment or similar type work * Corrugated box manufacturing experience a plus * A strong desire to advance within the facility * High School diploma or GED equivalent If this sounds great to you and you think you fit in, please submit your application. We want to hear from you! The starting rate is $22.84 per hour, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 10 days of paid vacation, and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at [1] ******************************** and the application window is expected to close by 1/30/2026. References Visible links 1. http://******************************** Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of safety, loyalty, integrity, and respect, we use leading science and technology to move fiber-based packaging forward. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by state or federal law.

We are looking for great talent like you to join our 3rd shift Maintenance team in Denver, CO! Are you looking for a unique opportunity to make an impact and solve challenges for the world\u2019s best brands? We're seeking fresh perspectives to help us deliver value to the brands we serve. Let's connect! Summary: The Electrical Maintenance Technician will have complete involvement in routine or emergency maintenance as well as corrective, preventive, predictive maintenance and care for all electrical and mechanical equipment and their related controls. What we offer: * Shift Available: 3rd Shift Positions, 8-hour shifts. * Union shop * Safety is #1 Priority * Health, Dental and Vision Insurance + Flexible Spending Account / Health Savings Account * Paid Time Off and Holidays * Life Insurance and Short-Term Disability * 401(k) with company match, and Pension Program * Overtime Potential * Career Development Opportunities * Corporate culture based on integrity, respect, accountability, and excellence. Responsibilities: * Performs preventive maintenance procedures on mechanical, electrical, pneumatic, and hydraulic equipment on a scheduled basis; Inspects belts, gearboxes, chains, bearings, etc. * Troubleshooting of low voltage circuits, analog devices, VFDs, and motor control circuitry to obtain a root cause of failures. * Troubleshoot hydraulic and pneumatic equipment, and devices to determine faults and failures. * Regular repair and maintenance are required in non-production areas including the warehouse, design lab, building, and grounds. * Uses CMMS system for work order implementation, recordkeeping of daily activities, and planned projects. * Functional an operational knowledge, troubleshooting, and repair of low voltage circuits, analog devices, VFDs, and motor control circuitry to obtain a root cause of failures. * Functional and operational knowledge, troubleshooting, repair, and maintaining of line voltage(120, 240, 277, and 480) equipment, including switches, power supplies, motors, drives and associated controls. * Drive and PLC troubleshooting, problem solving and installation. * Experience with RS Logix, RS5000 and other drive interfaces software is a plus. * Performs preventive maintenance procedures on mechanical, electrical, pneumatic, and hydraulic equipment on a scheduled basis; Inspects belts, gearboxes, chains, bearings, etc. * Troubleshoot hydraulic and pneumatic circuits, and devices to determine faults and failures. Regular repair and maintenance are required in non-production areas including the warehouse, design lab, building, and grounds. Requirements: * 2 - 5 years of Electro-Mechanical troubleshooting experience with focus on electrical/electronic preferred. * An operational knowledge of automated industrial machinery which includes drives, PLC\u2019s, VFD\u2019s servos, relays, 3 phase power, communication devices, industrial / electronic controls and power transmission systems. Also, will require familiarity with motors, pumps, gear boxes, chains etc. * A strong electrical aptitude for drive and PLC trouble shooting. * Strong problem-solving ability of mechanical and electrical systems. * A good understanding of heavy rotating equipment, hydraulic and pneumatic systems. * Must be able to read and interpret both electrical and mechanical drawings. * Must be computer literate with Microsoft environment. * Excellent written and verbal communication skills. * Ability to work independently in a mature and respectful professional manner. * Ability to work various shifts / overtime / days per week. If this sounds great to you, please submit your application. We want to hear from you! The salary range for this position is $32.50 - $35.00 per hour, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, vacations for the covered location will be provided based on the schedule below: Year 0 - 1 (5 days), and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at [1] ******************************** and the application window is expected to close by 1/30/2026. References Visible links 1. http://******************************** Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of safety, loyalty, integrity, and respect, we use leading science and technology to move fiber-based packaging forward. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by state or federal law.

RESPONSIBILITIES: Ensure that the product is moved from the truck to the staging area in a safe and efficient manner. Maintain and perform daily safety inspections of the clamp truck and maintain a clean and safe work environment. Perform lockout/tag out procedures on trailers. Maintain good housekeeping and manufacturing practices at all times. Pick and stage orders and load and unload trucks, while maintaining inventory integrity through proper handling and storage. BASIC QUALIFICATIONS: High School Graduate or GED. Successful candidate must be willing to work ANY shift. Certified industrial forklift driver or ability to get certified in a timely manner. 6 months forklift operator experience. Must be authorized to work in the U.S. PREFERRED QUALIFICATIONS: Experience in a packaging or other manufacturing environment.

Responsibilities: Perform a variety of manufacturing tasks using Production Equipment to ensure steady workflow. Ensure a high quality product is coming off the machine. Conduct quality checks to ensure sheets have required dimensions and zero material defects. Lead machine crew with setups/change overs. Problem solve when issues with the machine arise. Complete necessary reports. Other duties as assigned. Basic Qualifications: High school diploma or GED. Strong safety background and good attendance record. Works well in a team environment. Ability to work any shift, including overtime and weekends. Strong mechanical aptitude and be good communicator. Preferred Qualifications: Previous experience operating corrugated equipment. Experience in a packaging or other manufacturing environment, with an understanding that temperatures and volumes of work may vary. PCA is an Equal Opportunity Employer - Veterans/Disabled and other protected categories

Under the general direction of the Production Manager, the Production Superintendent provides general supervision for production, shipping, and other related functions as assigned. The Production Superintendent administers established policies and procedures to achieve maximum plant effectiveness ad to relieve the Production Manager of operating detail. The Production Superintendent is responsible for effectively leading a production team in the efficient and safe production of corrugated products. As a member of the plant management team, the Production Superintendent is responsible for evaluating opportunities to improve overall plant performance and profitability. PRINCIPLE ACCOUNTABILITIES: Coordinate activity with the production manager to plan and manage daily and weekly schedules to meet production goals, prioritize work orders, maintain quality requirements, and assure an even flow of work through all the departments with to increase up-time and minimize unscheduled downtime. Maintain a clean, safe and injury-free work environment by ensuring health and safety procedures are understood and executed by all employees. Assist the Production Manager in enforce health, safety, environmental, quality, and continual improvement standards as set by the corporation and by local, state, and federal regulations. Oversee the daily operations of the maintenance department including predictive and preventative maintenance, planned shutdowns, and clean-up and installation of new equipment. Identify staffing needs, hire competent individuals, conduct employee trainings, oversee employee performance, and manage any disciplinary or termination situations. Conduct employee training on all equipment, protocols, production standards, safety regulations, and waste control on an ongoing basis. Analyze production performance, identify opportunities, make recommendations for process and equipment improvement, establish and execute goals. Direct and coordinate all production planning activities including production scheduling and processing, managing inventory, product delivery, and trimming the corrugator to minimizing waste. Ensure predictive and preventive maintenance programs are accomplished and repairs are completed on a timely basis so that productions and profitability objectives are met. Conduct plant production meetings. BASIC QUALIFICATIONS: Bachelor's degree. 7+ years' of previous experience in corrugated manufacturing industry. 5+ years' previous experience in a supervisory capacity at a corrugated manufacturing facility. Previous experience in coaching, training, teambuilding, performance development, and conflict resolution. Established knowledge of corrugated and packaging manufacturing machinery, concepts, practices, and procedures including continual improvement processes and safety practices. Working knowledge of computer systems including experience with Microsoft Word, Excel, and Outlook software as well as experience with manufacturing systems including shop floor software. Previous work experience as a member of a team, or a strong understanding of the importance of open communication and information sharing between team members. Ability to work flexible hours as needed. Must be authorized to work in the U.S. PREFERRED QUALIFICATIONS: Bachelor's degree in business, engineering, or electrical engineering. KNOWLEDGE, SKILLS & ABILITIES: Strong interpersonal skills to effectively lead and communicate with production team and management. Strong verbal and written communication skills with the ability to effectively communicate with individuals throughout the company on departmental procedures, policies, practices, and requests for information. Strong listening, evaluating, and problem solving skills. Ability to create alternative solutions and meet deadlines. Strong organizational skills with the ability to handle numerous details, deadlines, and requests. Strong analytical, mechanical and mathematical skills with the ability to see and establish patterns. Ability to work in a fast paced, deadline-oriented environment, prioritize assignments, and handle multiple projects and/or requests concurrently.

RESPONSIBILITIES: Work as part of a team in support of a manufacturing operation with a goal of increasing productivity; decreasing downtime and waste. Receive and follow directions from the Operator and/or Supervisor. Assist machine operator to set up orders, mount printing and cutting dies, ink adjustments, and ensure quality checks are performed before, during and upon completion of each order. Inspect machine during run and notify Operator when acceptable parts are not being produced. Assist in cleanup of equipment. Follow all company safety rules and lock-out tag-out procedures. Maintain shop and shop equipment per 5S Standards. Other duties as assigned. BASIC QUALIFICATIONS: High School Graduate or GED. Passionate about maintaining a safe work environment. Ability to stack parts up to 30 lbs. for a period of up to 12 hours. Ability to work any shift, overtime and weekends, as needed. Must be authorized to work in the U.S. KNOWLEDGE, SKILLS & ABILITIES: Must be willing to work closely on a day-to-day basis with other production personnel. Ability to share ideas with others to solve problems of essential importance.

As a Fortune 500 company, Packaging Corporation of America (PCA) is an ideas and solutions company. Our corrugated packaging business seeks to be the leader in helping our customers - large and small - package, transport and display products of all kinds. Our white paper business delivers Paper With Purpose by providing the highest level of customer service and operational excellence. We have approximately 15,000 team members in more than 100 locations in the United States that strive to meet the local needs of our customers. Our mission is to serve the needs of our customers, today and tomorrow, with products and services that exceed expectations for performance and environmental responsibility. People • Customers • Trust Responsibilities: Contribute to the continuous operation of the corrugator and achieving daily production goals. Operate corrugator stacker, transfer cart and automatic strapper in a safe and competent manner. Follow all company safety rules, lock-out procedures, and good housekeeping practices. Maintain a high level of quality and productivity, count accuracy of material and unit appearance. Basic Qualifications: Must be a high school graduate or have a GED. Ability and willingness to work any shift, overtime hours and weekends as needed. Ability to work in a non-air-conditioned facility. Ability to read and comprehend simple instructions, such as schedules and orders. Ability to stand for prolonged periods of time and perform tasks that involve lifting, bending, stooping. Must have an excellent attendance record. Ability to pass pre-employment background check and drug screen. Must be authorized to work in the U.S. Preferred Qualifications: Experience in a packaging or other manufacturing environment. Knowledge, Skills & Abilities: Ability to work within a team and effectively communicate with others. Ability to work in a fast-paced environment and handle multiple requests simultaneously. All qualified applicants must apply at Careers.packagingcorp.com to be considered. PCA is an Equal Opportunity Employer - Veterans/Disabled and other protected categories.

RESPONSIBILITIES: Works as part of the production crew with a main focus on preparing the machine for the production run, according to the customer order. Prepares the stencil that stamps the product with identification. Cleans and oils the machine daily. Orders pallets from the Forklift Driver, according to the need expressed on the schedule. Responsible for having pallets at the machine for the finished products. Assists with running orders when the machine is ready by watching the run continue smoothly and without problem. If a problem arises, such as machine failure, product quality is not to standard, or a shortage of paper, this individual notifies the operator of the problem. May need to work with management, maintenance, and other company employees to fix the problem. Palletizes the product according to the shop card and/or in a manner suitable for shipping. May be required to feed the machine on occasion. Responsible for adhering to the ISO procedures and taking direction from the operator. Works with various production machines and basic tools such as hammer and knife. BASIC QUALIFICATIONS: High School Graduate or GED. Ability to read and comprehend simple instructions, such as schedules and orders. Must be willing to work any shift and overtime on short notice, including weekends Ability to work in manufacturing environment, with varying temperatures based on season, around machinery, and heavy Forklift traffic. Must be authorized to work in the U.S. PREFERRED QUALIFICATIONS: 1 + year of experience in a packaging or other manufacturing environment.

RESPONSIBILITIES: Perform a variety of manufacturing tasks using Production Equipment to ensure steady workflow. Ensure a high quality product is coming off the machine. Conduct quality checks to ensure boxes have required dimensions and zero material defects. Lead machine crew with setups/change overs. Problem solve when issues with the machine arise. Complete necessary reports. Other duties as assigned. BASIC QUALIFICATIONS: High school diploma or GED. Strong safety background and good attendance record. Works well in a team environment. Ability to work any shift, including overtime and weekends. Strong mechanical aptitude and be good communicator. PREFERRED QUALIFICATIONS: Previous experience operating corrugated printing equipment. Experience in a packaging or other manufacturing environment, with an understanding that temperatures and volumes of work may vary.

Responsibilities: Contribute to the continuous operation of the corrugator and achieving daily production goals. Operate corrugator stacker, transfer cart and automatic strapper in a safe and competent manner. Follow all company safety rules, lock-out procedures, and good housekeeping practices. Maintain a high level of quality and productivity, count accuracy of material and unit appearance. Basic Qualifications: Must be a high school graduate or have a GED. Ability and willingness to work any shift, overtime hours and weekends as needed. Ability to work in a non-air-conditioned facility. Ability to read and comprehend simple instructions, such as schedules and orders. Ability to stand for prolonged periods of time and perform tasks that involve lifting, bending, stooping. Must have an excellent attendance record. Ability to pass pre-employment background check and drug screen. Must be authorized to work in the U.S. Preferred Qualifications: Experience in a packaging or other manufacturing environment. Knowledge, Skills & Abilities: Ability to work within a team and effectively communicate with others. Ability to work in a fast-paced environment and handle multiple requests simultaneously.