Packaging Engineer remote jobs

About Us Trinity's core values represent an assurance of quality, professionalism, and reliability. To us, they are the foundation of our company, the standards against which we constantly judge ourselves. We are focused on client satisfaction, employee growth, and quality assurance. Trinity Consultants is committed to achieving optimal performance with minimal adverse environmental and societal impacts. Trinity is committed to the health and safety of our employees and the protection of the environment. Effective Health, Safety, and Environmental (HSE) protection in our business is every employee's responsibility for every activity that is conducted in our workplace or while at client facilities. ESSENTIAL DUTIES AND RESPONSIBILITIES Prepare air permit applications, for client projects in accordance with applicable local, state, and/or federal agency air regulations or standards. Perform emission calculations. Review and evaluate state and federal regulation applicability. Prepare, review, and submit regulatory reports and routine compliance reports as required by permits and applicable regulations. Review and analyze results of emissions testing. Knowledge or experience with air dispersion modeling. Assist clients with permitting strategy and developing pathways to continuous compliance. Communicate with clients and regulators as appropriate. Support preparation of proposals. Qualifications: Bachelor's, Master's, or other advanced degree in Environmental/Chemical/Civil Engineering. Minimum 2 years of experience in environmental consulting, focused on air quality. Advanced working knowledge of Excel and an understanding of the Windows operating system and Microsoft Office 365. Demonstrated understanding of state and federal air quality regulations and specific knowledge of general air permitting process: NSR, Title V, PSD, NSPS, NESHAP, BACT, etc. Excellent written and verbal communication skills and ability to coordinate and work effectively in a team setting. Ability to work independently in a remote work situation when needed. Excellent attention to detail and completeness. Must be able to perform multiple tasks with firm deadlines, sometimes deadlines could be simultaneous. (The specific statements shown in each section of this description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job.) SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities.

## **About the Role** Mercor is seeking experienced **industrial engineers** to support a leading AI lab in advancing research and infrastructure for next-generation machine learning systems. This engagement focuses on diagnosing and solving real issues in your domain. It's an opportunity to contribute your expertise to cutting-edge AI research while working independently and remotely on your own schedule. ## **Key Responsibilities** - You'll be asked to create deliverables regarding common requests regarding your professional domain - You'll be asked to review peer developed deliverables to improve AI research ## **Ideal Qualifications** - 4+ years professional experience in your respective domain - Excellent written communication with strong grammar and spelling skills ## **More About the Opportunity** - Fully remote and asynchronous - complete work on your own schedule - Expected workload: 30 hours per week, with flexibility to scale up to 40 hours - Project start date: immediately, lasting for around 3-4 weeks ## **Compensation & Contract Terms** - Independent contractor engagement through Mercor - Hourly compensation, paid weekly via Stripe Connect - Payments based on services rendered; contractors maintain full control over their work schedule and methods . **About Mercor** - Mercor is a talent marketplace that connects top experts with leading AI labs and research organizations - Our investors include Benchmark, General Catalyst, Adam D'Angelo, Larry Summers, and Jack Dorsey - Thousands of professionals across domains like engineering, research, law, and creative services have partnered with Mercor on frontier AI projects We consider all qualified applicants without regard to legally protected characteristics and provide reasonable accommodations upon request. ## **Earn $250 by referring** Share the referral link below, and earn $250 for each successful referral through this unique link. There's no limit on how many people you can refer. Restrictions may apply. [Learn

FireWise Consultants LLC is a unique consulting firm focusing on the Passive Fire Protection industry with a specialization in Firestop. We provide an innovative, hands-on approach to designing, implementing, and reviewing buildings, streamlining all project stages to ensure completion to the highest standard. Our professional time-saving system allows for a single point of contact to identify unforeseen issues and solve problems efficiently. Join our team and become part of the recognized leader in Passive Fire Protection consulting. Get exposed to the largest projects, designers, builders and owners. Play a visible, high-value role on major construction projects from your first day. Balance fieldwork, office collaboration, and remote flexibility. Role Description If you're a recent construction management graduate and/or have experience working for a large General Contractor or Sub Contractor and you're looking to skip years of climbing the corporate ladder, this is your chance to step into leadership-level exposure from day one. This is a full-time Project Engineer- Passive Fire Protection Consultant role, located in Carmel, California with the flexibility for some work from home. You'll work directly with project teams, architects, contractors, and owners to help solve problems that shape projects. This role offers a unique opportunity to stand out in a niche market, gain rapid technical expertise, and become a trusted advisor to some of the top construction professionals in California. The day-to-day tasks include overseeing and managing passive fire protection projects, developing project plans, coordinating with clients and stakeholders, conducting site inspections, ensuring compliance with fire safety regulations, and providing technical guidance on firestop systems. Responsibilities Collaborate directly with owners, architects, general contractors, and subcontractors to deliver expert passive fire protection solutions. Work on some of California's largest and most technically demanding projects, including OSHPD healthcare, OSFM, aviation, education, and research facilities. Work directly with companies President and Project Manager to help research, track, and develop solutions while aiding in progress project completion. Travel up to 25% to job sites while maintaining a flexible hybrid work schedule. Work in Office direct with President 2-3 days per week. More work from home days in future as team member expands their experience with the opportunity to be fully remote. Qualifications Bachelor's degree in Construction Management (preferred), Civil Engineering, Architecture or a related field (recent graduates welcome). Strong problem-solving, analytical, and communication skills. Proficiency in construction software such as Bluebeam, Navisworks, Revit, Procore, AutoDesk Construction Cloud, AutoCAD, Revizto, etc. Accepting of a schedule, roles and responsibilities that changes daily to meet the clients needs and demands. Self motivating to work efficiently remotely. Fast learner, open minded, outside the box thinking and good team player. Does not need experience in passive fire protection as this can be taught. Driven, detail-oriented, and comfortable managing multiple responsibilities. Someone who has experience working on fast paced high profile projects and understand the design, build and inspection process. This includes how the paperwork, sequencing and approval processes occur. Reside within driving distance of Monterey, California. Benefits: 401(k) 401(k) matching Flexible schedule Health insurance Paid jury duty Paid time off Relocation assistance Vision insurance

Type of Requisition: Regular Clearance Level Must Currently Possess: None Clearance Level Must Be Able to Obtain: Secret Public Trust/Other Required: None Job Family: Data Science and Data Engineering Job Qualifications: Skills: Collaborating, Design, Technical Requirements Certifications: None Experience: 0 + years of related experience US Citizenship Required: Yes Job Description: Own your opportunity to turn data into measurable outcomes for our customers' most complex challenges. As an UiPath Robotic Process Automation Developer Associate at GDIT, you'll power innovation to drive mission impact and grow your expertise to power your career forward. The UiPath Robotic Process Automation Developer Associate will find themselves at the heart of GDIT's customer-centric approach, playing a pivotal role in ensuring our customers successfully meet their strategic goals. They will use their UiPath expertise and their project skills to develop and promote organizational goals to completion. If you enjoy collaborating with others in a fast-paced environment, you will find this role to be both rewarding and challenging. MEANINGFUL WORK AND PERSONAL IMPACT As an UiPath Robotic Process Automation Developer Associate, the work you'll do at GDIT will be impactful to the mission of our customers. You will play a crucial role in the following areas: Design, develop, test, and deploy solutions built in UiPath; may also utilize Microsoft Power Platform (Power Apps and Power Automate) Develop flows and automation with UiPath to increase efficiency and effectiveness of organization. Develop easy-to-use interfaces and forms in UiPath forms/apps to drive business processes. Collaborate with end users, stakeholders, and management to identify business process needs, document the business and technical requirements, and determine the best automation solutions. Create process, technical architecture, design, and user guide documentation. Support architecture and design of UiPath roadmaps. Participate in development and test teams driving the design, creation, testing, and delivery of technical functionality. Collaborate with GDIT and customer personnel to establish and maintain automation infrastructure. Implement best practices in code review, troubleshooting, debugging, and post-implementation support. Contribute to the development of IT related, technical processes reviews, postmortems, and continual process improvement internally as well as for customers/stakeholders. Collaborate with technical staff to define implementation and process best practices. Scope work and create estimations of effort. WHAT YOU'LL NEED TO SUCCEED Bring your expertise and drive for innovation to GDIT. The UiPath Robotic Process Automation Developer Associate must have: ● Education: Technical Training, Certifications or Degree ● Experience: 0+ years of related experience ● Required Skills: Proficiency with UiPath design, development, testing, and deployment Understanding of UiPath automation frameworks Ability to identify and solve complex problems Capability to learn new technologies quickly. Excellent collaboration skills and can effectively work in a team environment. Ability to effectively manage multiple competing priorities at any given time. Ability to work independently and as part of a team Excellent communication and presentation skills with the ability to present complex insights to both technical and non-technical audiences. Strong analytical skills with the ability to collect, organize, analyze, and disseminate insights with attention to detail and accuracy. ● Preferred Skills: UiPath Automation Developer Associate and/or Automation Developer Professional Certification(s) Proficiency with Microsoft Power Platform (Power Apps and Power Automate) design, development, testing, and deployment Excel background; familiarity with other Microsoft tools (Outlook, Word, Excel, PowerPoint) Exposure to ServiceNow. Knowledge of ITIL framework. Knowledge of Agile methodology. Experience with additional coding languages such as Python, R, JAVA, C#. VB.Net, SQL Previous experience in the defense or government sector a plus ● Security Clearance Level: Must be able to obtain a Secret clearance ● US Citizenship Required ● Location: State of Louisiana Candidates within LA who reside within 60 miles of our Integrated Technology Center in Bossier City, LA will follow a hybrid work model Candidates within LA who reside more than 60 miles from our office in Bossier City, LA will follow a remote work model GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. ● Growth: AI-powered career tool that identifies career steps and learning opportunities ● Support: An internal mobility team focused on helping you achieve your career goals ● Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off ● Flexibility: Full-flex work week to own your priorities at work and at home ● Community: Award-winning culture of innovation and a military-friendly workplace OWN YOUR OPPORTUNITY Explore a career in data science and engineering at GDIT and you'll find endless opportunities to grow alongside colleagues who share your determination for solving complex data challenges. The likely salary range for this position is $110,614 - $74,750. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: Less than 10% Telecommuting Options: Remote Work Location: USA LA Home Office (LAHOME) Additional Work Locations: Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc. Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman's Aeronautics Systems sector is seeking a **Manufacturing Engineer / Principal Manufacturing Engineer** supporting out Production Engineering and Operations (PE&O) organization. The selected candidate will join our team of qualified, diverse individuals on site in **Melbourne, FL** where technology and teamwork come together. This position is on-site only, and **_cannot be performed remotely due to the nature of the role_** . **Please Note:** A start date, for candidates selected, will be determined **after** obtaining both a DOD Secret Clearance and Special Program Access. Manufacturing Engineering job duties involve the following: + Provide guidance to Engineering regarding design concepts to ensure the best manufacturing technique is being used to meet the Engineering design. + Participate in tool design reviews to ensure tools are feasible and reduce build times and program costs during assembly. + Define sequence of operations for product builds. + Investigate and initiate corrective actions and improvements that involve non-conforming product. + Identify improvement opportunities in areas that require producibility and affordability initiatives. Manufacturing Engineers for Aeronautics Systems are expected to provide technical solutions to a wide range of complex and difficult problems. They are problem solvers who can provide results that are innovative, thorough, practical, and consistent with organization objectives. We seek Manufacturing Engineers that use a unique skill set that includes a hands-on approach and act as the technical representative voice for the Manufacturing organization. We offer flexible work arrangements, including a 9/80 or 4/10 work schedules, phenomenal learning opportunities, exposure to a wide variety of projects and customers, and a very friendly team environment. We are looking for self-motivated, proactive, and goal-oriented people to help us grow our services and become even better at what we do. **This requisition may be filled at a** **Manufacturing Engineer / Principal Manufacturing Engineer** **based on the qualifications below.** **Basic Qualifications (Manufacturing Engineer):** + Bachelor's Degree in a Science, Technology, Engineering or Mathematics (STEM) and 1 year of related engineering experience OR Master's Degree in STEM and 0 years of experience + Active DOD Secret security clearance investigated within the last 5.5 years. + Ability to obtain/maintain Special Access Program within a reasonable amount of time as required by the business. **Basic Qualifications (Principal Manufacturing Engineer):** + Bachelor's Degree in a STEM and 4 years of related engineering experience OR Master's Degree in STEM and 3 years of related engineering experience + Active DOD Secret security clearance investigated within the last 5.5 years. + Ability to obtain/maintain Special Access Program within a reasonable amount of time as required by the business. **Preferred Qualifications:** + Active in-scope Program Access + Experience in NX, Catia, CAD, and or with related Computer aided design programs. + Degree in Manufacturing Engineering, Mechanical Engineering, Aerospace Engineering, Systems Engineering, Industrial Engineering, or Electrical Engineering. + Experience in Geometric Dimensioning and Tolerancing (GD&T). + Manufacturing work instructions or instruction authoring experience. + Experience with developing enhancement processes that improve production shop floor efficiencies. + Experience with reviewing engineering models during concept design phase for manufacturing producibility. + Excellent communicator, ability to provide product improvement proposals and present to engineering designers and technical team for approval. + Experience providing innovative techniques focused on improving product designs and tooling assemblies or equipment. + Aerospace Defense Manufacturing experience. + Experience in Microsoft Office Suite (Excel and/or Microsoft PowerPoint). **What We Offer:** At Northrop Grumman, we are on the cutting edge of innovation -- building the next generation of sophisticated aircraft to protect our country. Our diverse portfolio of programs means there are endless paths to cultivate your career. We are well-known for our inclusive, family environment, phenomenal learning opportunities, and exposure to a wide variety of projects and customers. We also offer exceptional benefits/healthcare, a great 401K matching program, and 14 Employee Resource Groups inclusive of all employees! Primary Level Salary Range: $72,100.00 - $108,100.00 Secondary Level Salary Range: $89,400.00 - $134,200.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Job Description If you're a strategic problem solver with a talent for making data-informed decisions, you could be a great fit for this full-time Industrial Process Engineer role with Quality Pork Processors! We need a meticulous and analytical person to help refine the daily processes at our Austin, MN company. THIS IS NOT A REMOTE POSITION. YOU MUST BE ABLE TO WORK FULL-TIME ON-SITE IN AUSTIN, MN. Not only do you earn a competitive salary of $70,000 - $90,000/year (based on experience), but you also receive these excellent benefits: Medical, dental, vision, and life insurance Paid vacation and 9 paid holidays effective immediately A 401(k) with matching A free onsite medical clinic Elevate your career and make a direct positive impact on our thriving business as an Industrial Process Engineer! Location Requirement: Candidates must currently reside in or near the Midwest or be willing to relocate to Austin, MN. This is an on-site position, and applicants must be legally authorized to work in the United States. Remote work or international living arrangements will not be considered. WHAT WE'RE LOOKING FOR Candidates must currently reside in or near the Midwest or be willing to relocate to Austin, MN. This is an on-site position, and applicants must be legally authorized to work in the United States Bachelor's degree in an engineering field such as industrial, mechanical, manufacturing, or civil Relevant engineering work or internship experience Ability to use calculus, trigonometry, algebra, and other types of math to perform basic and advanced calculations determining process productivity Excellent verbal and written communication skills with the ability to explain technical recommendations in layman's terms Strong leadership and interpersonal skills Flexible problem-solving skills Analytical skills with the ability to accurately evaluate and interpret data WHAT IT'S LIKE BEING AN INDUSTRIAL PROCESS ENGINEER As a vital member of our engineering team, you're responsible for analyzing our current manufacturing processes and implementing new strategies for improving efficiency while cutting costs and minimizing waste. You're motivated to optimize our production procedures, and you achieve this by managing schedules, enforcing quality control measures, and identifying areas for improvement in our manufacturing processes. Utilizing your math knowledge and project management skills, you evaluate data and develop ways to enhance our efficiency. Diligently, you coordinate services, examine employee responsibilities, and identify innovative tools or procedures to boost production. Attention to detail is crucial as you analyze data, design new control systems, and prepare documentation such as material lists, cost analyses, cost estimations, and purchase orders. You're pivotal to our continued success and future growth! ABOUT US Founded in 1989, we are a privately held meat processing company. Our mission is to safely process quality products as our team grows, protects, and represents our company values. With a workforce of over 1,300 people, we work hard to follow that mission. We are proud to have a very diverse staff. With one of the best safety records in the industry, we put the safety of our people first. As an organization, we strive to take good care of our people and provide them with a great place to work! Are you ready to tackle interesting challenges and put your problem-solving skills to the test? Don't miss out - apply today with our short initial application! Job Posted by ApplicantPro

Description Adept Group offers an award-winning workplace for exceptional packaging industry talent. We work on a range of innovative projects for iconic brand owners. Our technically gifted team collaborates to produce unparalleled results. We offer a great place to showcase your expertise and build upon your skillset. All while having fun with amazing people from a variety of diverse backgrounds. We're driven, inspirational and most importantly, human. We offer a flexible, creative culture focusing on 3 pillars - our environment, our communities, and our health and well-being. Join a team committed to building a sustainable future! The Opportunity Adept Group is seeking a Senior Packaging Engineer (1099 Contractor) in the Midwest! This candidate would 5-10+ years' experience in returnable/reusable packaging systems. Experience working in the Auto or Industrial industries preferred. This candidate would have the ability to validate specifications and assess cost models and are familiar with packaging development lifecycle (design to implementation). This is a 1099 Contractor (Independent Contractor) opportunity for a project expected to begin in January 2026 for 12 months at 40 hours per week. 5-10% travel required. *Only candidates located in the Midwest will be considered (MN, OH, TN, etc.)* Key Responsibilities: Participate in weekly supplier calls across active launch waves, supporting packaging readiness and issue resolution. Validate supplier-provided packaging data, specifications, and cost models for accuracy and alignment with company standards. Manage and maintain should-costing activities, ensuring supplier cost inputs are rationalized against benchmarks. Provide guidance within the supplier-led design process, client sets pool-pack parameters (e.g., 5 totes, 3 bulk containers, pallets), while suppliers own the internal dunnage design (~80% of the time). The engineer will review, advise, or intervene when supplier solutions do not meet requirements or performance expectations. Support supplier design and fit-check activities; travel on-site when required to confirm packaging function and handling. Collaborate closely with plants and supplier teams on lineside presentation, handling improvements, and load density optimization. Identify and implement opportunities to enhance existing should-cost tools and engineering templates, improving accuracy and usability. Act as a liaison between logistics, packaging suppliers, and engineering teams to ensure returnable packaging solutions are technically sound, cost-effective, and compliant with RPP standards. Support continuous improvement initiatives within the RPP, including standardization of packaging specifications, development of best practices, and documentation of lessons learned. Respond to ad hoc packaging engineering requests, which may include data analysis, validation, or packaging concept feedback. Typical Day to Day: Attending supplier and internal stakeholder calls Reviewing and validating packaging data Working in should-costing tools Collaborating with suppliers and plants on packaging implementation Occasional site visits for fit-check support Cross-functional communication with logistics and operations teams Requirements: 5-10 years of experience in returnable/reusable packaging systems Background in returnable/reusable packaging Ability to validate specifications and assess cost models Familiarity with packaging development lifecycle (design to implementation) Excellent data analysis and technical communication skills Comfort working with non-packaging SMEs (i.e., supplier staff who may also manage packaging) Nice to Haves: Automotive or industrial packaging experience Experience working with global supplier networks Familiarity with packaging costing tools or systems Fit-check process knowledge Ability to independently source/draft concepts for heavy-duty applications (e.g., 300 lb. fuel pumps) Experience consulting on material right-sizing or cost-optimization (e.g., overbuilt expendables) Experience participating in packaging program development or improvement. Disclaimer: This is a 1099 independent contractor position. As such, this role is not eligible for company-sponsored benefits, including health insurance, paid time off, or retirement plans. The contractor is responsible for managing their own tax withholdings, insurance coverage, and other obligations associated with independent contractor status. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.

Who we are Quansight has its roots in the Python data science community. Our founders have had significant involvement in creating and maintaining NumPy, SciPy, Jupyter, Spyder, Dask, Conda, Numba, and other projects, as well as PyData NumFOCUS, and Anaconda. Our mission is to connect companies to open-source communities to create sustainable solutions that benefit the whole ecosystem. We accomplish this mission by providing various services ranging from open-source software development to training and consulting. We believe in a culture of do-ers, learners, and collaborators. We are looking for people who are motivated, humble, curious, and respectful of others. About the Role Quansight is looking to find a full-time remote Senior Engineer Python/C/C++ Packaging to join our team of open source experts and software engineering professionals. A core part of this position will involve building on your role as, or becoming, a Python packaging or conda-forge community member and helping improve and maintain these open source ecosystems. In this position, you'll get to As a Senior Engineer Python/C/C++ Packaging, you will work on various open source and consulting projects, focusing on building & packaging complex projects with Python, C, C++ and possibly CUDA and Rust code for the PyPI and Conda ecosystems, and on Python packaging standards and tooling. In this position, you'll get to: Work with modern build, packaging, CI, and DevOps technologies Actively contribute to open-source projects throughout the Python ecosystem Develop new features, performance enhancements, and help maintain projects with millions of users Maintain and extend the existing documentation for the open source projects you'll contribute to Interact with clients from both industry and academia Collaborate with, learn from, and mentor team members and community contributors Be a part of the Python, PyData, and packaging communities Drive fruitful conversations around technical issues, engineering practices, and community processes, and suggest improvements and ideas as you encounter them Review code and provide thoughtful, constructive feedback during code reviews Position Requirements Required: Significant open source experience as a maintainer or longer-term contributor is necessary for this position Prior experience with packaging for PyPI, Conda or another ecosystem (e.g., a Linux distro) Familiarity with compilers (e.g., MSVC, GCC, Clang), linkers, build tools (e.g., Make, CMake, Meson, setuptools, Bazel) and related tooling (e.g., nm, otool, patchelf) Fluency in using Git and GitHub Experience with Continuous Integration and Deployment tools Experience working asynchronously on a remote, distributed team (does not have to be professional experience) Bonus points (not required, but these would be a great advantage) We highly value good communication skills. If you have expertise in languages like C, C++, and Python and can navigate large code bases, we expect you can learn about any new tool or project quickly. Experience with scientific computing or applied ML/AI. Other relevant technical skills, such as fluency in more languages (e.g., CUDA, Rust, JavaScript) or experience authoring technical documentation. Experience with shell scripting and containerization (Docker, Ansible). We aim to help you grow within Quansight and the Python open source community. Please remember that we describe the background that we think would best fit the role. Even if you don't meet all the requirements and are confident that you are up for the task, we want to get to know you! Candidate journey Application: Once you have applied, a recruiter will review your application to determine if your work experience and skills align with the necessary competencies of this position. If they determine that you could be a good fit for Quansight, the recruiter will contact you to schedule a time to talk. HR interview: This is an opportunity to get to know each other. We will tell you a little more about who we are, and we look forward to hearing about your past experiences and what you are looking for in your next role. We want to know why you are interested in joining us and what questions you have about our team and mission. This will be scheduled as a 30-minute Google Meet. Interview loop: If you and your recruiter still feel you could be well-suited for this position following your call, we will arrange our interview loop with some team members. This will allow you to learn more about the team and the organization and help us better understand your skills and experience. For this particular role, the interview loop is as follows: 1:1 interviews: we will schedule three separate interviews. One with the hiring manager and two with Quansight Labs team members (these can be potential teammates or cross-functional team members, i.e. designers and engineers.) Following the completion of all interviews, our hiring team will make a final decision, and the recruiter will contact you to share the outcome of your interviews. If the team wants to move forward, the recruiter will discuss this and the details of our proposed offer with you. Why should you join? You'll become essential to a small, collaborative, fully distributed accessibility and engineering team. We strive to provide a working environment that gives you room to learn and grow. Quansight draws from experience in many large open-source communities over the years. Because these communities operate remotely and strive to be as inclusive and participatory as possible, they must also strive to be more transparent and systematic in communicating, sharing information, and working. We are building a culture at Quansight that follows and builds upon these principles. We offer flexibility in work times and locations, and vacation time is not just encouraged but celebrated and enforced. We offer competitive compensation, a comprehensive sick policy and parental leave, and a generous amount of flexible paid time off. If you are located in the United States, Canada, Germany or the UK we also offer a comprehensive benefits package. Where can we hire? Our engineering team is entirely remote. Our headquarters are in Austin, Texas, and our team is globally distributed with a significant presence in the United States, Europe, South America, and Asia. We will consider applicants anywhere (overlap with U.S. and Europe time zones is preferred). Commitment to diversity, equity, inclusion, and belonging Quansight understands that valuing diverse creative practices and forms of knowledge is crucial to and enriches the company's core mission. We encourage applications from everyone, including members of all equity-seeking communities, such as (but certainly not limited to) women, racialized and Indigenous persons, disabled people, persons of all sexual orientations, gender identities and expressions. We are an equal opportunity employer - all qualified applicants will receive equal consideration for recruitment, interviews, employment, training, compensation, promotion, and related activities. We do not discriminate based on race, religion, gender, gender identity, gender expression, color, national origin, pregnancy, ancestry, domestic partner status, disability, sexual orientation, age, genetic predisposition, medical condition, marital status, citizenship status, military or veteran status, or any other basis covered by applicable laws. Quansight will not tolerate discrimination or harassment based on these characteristics or any other unlawful behavior, conduct, or purpose.

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Sr. Engineer - Packaging Execution (Remote with Travel) The Senior Packaging Engineer will coordinate the execution and commercialization of innovative packaging solutions across primary, secondary, and tertiary formats. Focus on commissioning and validating new packaging designs through trials and experiments to support successful launches of Beverage and Core products. Drive packaging commissioning efforts both independently and in collaboration with cross-functional teams, including Product Engineering, Project Management, Packaging Quality, and Program Management. This is a hands-on, high-impact role for an experienced engineer passionate about packaging development and operational excellence. Essential Functions Onsite commissioning and qualification activities for packaging formats and adjacent systems across various packaging fill processes including Cold Fill, Hot Fill, CSD, HAA, and LAA Travel as needed to support project execution and attend technical training opportunities - Minimum 75% to Maximum 100% Coordinate multiple projects with varying levels of complexity simultaneously Apply analytical tools to diagnose and resolve manufacturing and design related challenges Collect, analyze, and present testing data to support project decisions Support cross-departmental knowledge transfer of packaging related best practices, root cause analysis, and solutions to quality issues Effectively diagnose, interpret, and communicate trial results to various technical and leadership audiences Contribute to the development of protocols, process workflows, training and reporting Demonstrate functional knowledge of various packaging materials (PET, rPET, HDPE, LLDPE) and packaging processes (Injection Molding, ISBM) along with their beverage applications Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 4 Years - Experience in Packaging or other related Engineering or Manufacturing fields 4 Years - Experience in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 6 Years- Experience in Packaging or other related Engineering or Manufacturing fields 6 Years - Experience in Position 4 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies Foundational knowledge of packaging processes including injection molding, blow molding, filling, capping, labeling, packing and palletizing Strong expertise in beverage filling processes and high-speed consumer product manufacturing Project management competencies - planning, scheduling, and risk mitigation Proven experience in commissioning and qualification of packaging and adjacent systems Demonstrated ability to manage complex projects independently with strong time management and prioritization skills Lean and Six Sigma basic training Proficiency in root cause analysis and technical troubleshooting Comfortable working in dynamic environments with shifting priorities Excellent verbal communication and presentation skills Collaborative team player with the ability to engage and influence across all levels of leadership Experience with packaging software tools (TOPS or CAPE) This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Manages a safe working environment and communicates safety incidents effectively Provides strategic input and oversight to departmental projects Makes data-driven decisions and develops sustainable solutions Puts overall company success first before department or individual success Facilitates discussions to achieve positive outcomes for the customer InnovACT Continuously evaluates existing programs and processes, and develops new initiatives to increase efficiency and reduce waste Creates, monitors, and responds to departmental performance metrics to drive continuous improvement Communicates a clear vision, and adjusts the strategy as needed when managing change Find a Way Together Demonstrates ability to think analytically and synthesize complex information Works effectively with departments, vendors, and customers to achieve organizational success Identifies opportunities for collaboration in strategic ways Empowered to be Great Develops and delivers multi-model communications that convey a clear understanding of the unique needs of different audiences Actively seek new ways to grow and be challenged using both formal and informal development channels Education Minimum Required: Bachelor's Degree in Engineering, Packaging, or another related field Preferred: Master's Degree in Engineering, Packaging, or another related field Certification/License: Required: N/A Preferred: PMP, Six Sigma Black Belt, CPP Foreign Language Required: None Required Preferred: Elementary Proficiency Spanish, French, German Typical Compensation Range Pay Rate Type: Salary$97,188.14 - $138,493.10 / Yearly Benefits *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

This role will be responsible for maintaining and improving production across various products and equipment at our West Union manufacturing facility. Why Work for CaptiveAire? Nation's leading manufacturer of commercial kitchen ventilation systems, and now offering a complete solution of fans, heaters, ductwork and HVAC equipment. Our primary purpose is to provide fully integrated, sustainable HVAC Systems. Leader in the industry for over 40 years with innovative technologies, unmatched service, competitive pricing, and rapid lead times. Mission: to provide the highest quality products and service to our users at the lowest possible price Strong commitment to the development of our employees, including continuous education opportunities like sponsorship for Professional Engineering license and continuous education through weekly webinars and company developed technical videos What our employees have to say: I love the mindset of continuous learning and pushing the bounds of your capabilities and knowledge. I love the people I work with and the environment, particularly in a world where remote work is common. I love how Captiveaire is all about connections, with customers, coworkers, end users, and everyone in between. What I truly admire about CaptiveAire is the company's unwavering commitment to innovation and continuous improvement… Equally impressive is the culture of open communication that exists throughout the organization. From my own experience, upper management never takes the stance that a task is “not their job.” Instead, there's a shared understanding that every role is essential to the company's success. This mindset, combined with the transparent communication across departments and facilities, creates a collaborative environment that truly sets CaptiveAire apart. We want to stay on the cutting edge and so are constantly sourcing and utilizing the best equipment available. Any position can provide feedback that is listened to and incorporated into processes. Collaboration is key at CaptiveAire and so there is no being “Silo-ed” into one area. CaptiveAire is fast-moving and no-nonsense. We operate differently than any other company that I've worked for with our decentralized structure. Quick action is taken when a good idea is presented. We are focused on end users where the rest of the industry is very short-sighted. We are on the front lines, actively changing the landscape of the HVAC industry. Learn more about CaptiveAire and our products here A Day in the Life: No two days are ever the same in this role. Tasks can include: Training operators in proper process, tool usage, and tool maintenance. Collaborating with other engineering teams on process efficiency, quality, and safety improvement projects. Developing new designs using 3D modeling software like Solidworks for carts or production tools. Then work with the fab shops to complete the fabrication of them in a timely manner. Work closely with contractors to coordinate utility needs such as air and electrical drops, and oversee the installation of new equipment. Coordinate daily, weekly, and monthly preventative maintenance tasks on machinery. Troubleshoot machines whenever the team needs extra support. Provide hands-on support to production lines as needed. Complete hands-on testing for new process changes From a Plant Process Engineer: I enjoy the constant problem solving and the drive toward innovation that keeps things exciting. I have had jobs in the past where the day could not end soon enough because I was ready to be done. This is not one of them. I find the job rewarding and find myself here past scheduled hours often not because I have to but because I want to. Primary Job Responsibilities: 95% of the workday will be on the manufacturing floor working on projects, operating and repair of equipment Involvement with equipment operators to ensure parts are programmed, training and any process related issues Responsible for working with Safety, Quality, and Industrial engineering teams on parts, assembly, and process improvements Implementation of Engineer Change Notices (ECN) and Process Change Instructions (PCI) Support production as needed, capable of building all products to the expected quality standards in the designated area of focus on an as needed basis Assist production staff with product related questions Work with Plant manager on various facility improvement projects Job Requirements: 0-10 yrs experience 4-year technical degree, in an electrical, electronics or mechanically oriented curriculum Must be strong in mechanical and electrical engineering. Internship/co-op experience is preferred Must enjoy hands on product exposure Electrical skills and experience needed AutoCAD or similar software a must Multi-tasking, problem solving and strong communication skills a must Strong emphasis on perfect product quality and to maintain a safe work environment Physical Requirements: Ability to work standing for 8 - 10 hours at a time Required to use ladder, forklift or other means to acquire parts for product assembly Able to use power & hand tools, as well as electrical testing and measuring equipment Ability to lift 35 to 50 pounds independently Benefits: Medical, dental and vision insurance Disability & life insurance based upon election of medical insurance 401k with employer match Paid holidays Paid time off (PTO) based upon tenure Flexible spending account (FSA) Tuition reimbursement, including for Professional Engineering (PE) License Relocation assistance Salary: $65k-$85k base, negotiable dependent on experience, with additional monthly bonus based on productivity and profits. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law. To qualify, applicants must be legally authorized to work in the United States. At this time we are not able to consider applicants that require sponsorship, now or in the future, for employment visa status. This position is classified as a safety-sensitive position. Employees in this position are subject to drug and alcohol testing in accordance with CaptiveAire's Drug-Free Workplace policy. #P1

The Role The Manufacturing Engineer is responsible for developing automated solutions, implementing new processes, optimizing existing processes, automated data collection, and executing the industrial control and programming strategy for GTI's production facilities. This position will work closely with the multiple teams to ensure flawless and quick speed to market. Success is gauged on the ability to deliver quality, detailed, and efficient solutions at scale. The Manufacturing Engineer will play a pivotal strategic role in priority projects from a feasibility standpoint through a full IQ, OQ, PQ validation and hand-off with a technical transfer to the site production team. They work collaboratively with multiple teams to deliver productivity improvements and Continuous Improvement. Responsibilities 50% travel required Coordinate the efforts of Engineering and technical resources based on Senior Leadership Priorities and Site 90-day plan priorities. Work with other departments (i.e. Prod Development, Project Management, Quality, Compliance, Operations, etc.) to integrate new systems. Dedicate start-up management support for selected complex project integrations. Ensures constant updates are provided to the VP of Manufacturing on the status of projects and improvement efforts in the facilities. SME for automated packaging equipment, flow wrappers, beverage line, multi-combi scales, bag filling equipment, integrations, and automation. Conduct studies, identify problems, recommend alternatives, and implement solutions in coordination with other teams. Develop and deploy automated solutions for numerous processes to gain efficiency and streamline workflows. Provide support to Start-up facilities via technical transfer: Staffing Equipment layout and requirements Construction hand off Regulatory engagement Best-practice processes Technical transfer related to equipment Work with integrators, contractors, and site personnel to bring new functionality online and to troubleshoot issues as they arise. Work with site maintenance and facilities personnel to develop and execute preventative maintenance plans. Maintain up to date as-built records and drawings for existing and new deployments. Integrate existing equipment with live data stream to dashboard with historian, report generation, alarms, notifications, and live visuals for site teams to track daily production. Other duties as assigned Qualifications Bachelor's degree in engineering and 5+ years Operations and Engineering experience in a manufacturing environment. Proven strategic experience in overseeing all aspects of large-scale manufacturing projects Knowledgeable of TPM-based continuous improvement methodology Knowledgeable of Engineering problem solving Able to diagnose complex technical systems and develop simple human-machine interface and training solutions for optimal operations. Experience in industrial networking/automation (SCADA-Ignition, ITOT, cyber security), controls experience (PLC - AB, Omron, Schneider, ladder logic \ STX), business and data analytics for manufacturing operations (Power Bi, Tableau,) vision systems, and robotics. Highly motivated, self-directed, innovative and able to work independently or among teams with keen judgement, common sense and resourcefulness Adapts and thrives in a demanding, start-up, fast-paced environment Possesses a high level of critical thinking Effective time-management skills and ability to multi-task Ability to work well with others while also completing individually assigned tasks. Operates with a high level of professionalism and integrity, including dealing with confidential information Must understand and comply with the rules, regulations, policies, and procedures of GTI Must have a solid understanding of the Medical Marijuana laws, rules and regulations set forth by the state; a pursuit to further their understanding and knowledge of the industry and the laws. Safety and Compliance Be aware of hazards in the workspace. Retain and understand department specific training. Report safety incidents/ concerns and comply with follow-up actions. Be compliant with area safety requirements, state regulations and PPE requirements. Follow GMP, biosecurity, sanitation or other quality and compliance requirements. Perform record keeping accurately and completely as directed by a lead or supervisor. Maintain and calibrate tools, equipment and machinery as directed by a lead or supervisor. Report and escalate safety & quality concerns. Working Conditions While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions. Must be able to sit and/or stand for extended periods of time while maintaining focus. Must be able to lift, carry, and balance up to 50 pounds (and up to 100 pounds with assistance) AND must be able to do so with extreme care and caution when working with product. Ability to work in a fast-paced, changing, and challenging environment Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil). Additional Requirements Must pass any and all required background checks Must be and remain compliant with all legal or company regulations for working in the industry Must possess valid driver's license Must be a minimum of 21 years of age Must be approved by state badging agency to work in cannabis industry The pay range is competitive and based on experience, qualifications, and/or location of the role. Positions may be eligible for a discretionary annual incentive program driven by organization and individual performance. Green Thumb Pay Range$90,000-$110,000 USD

At Kovalus Separation Solutions (KSS) , we are committed to revolutionizing the separation industry through advanced technologies such as membrane filtration, ion exchange, evaporation, drying, and more. Our innovative solutions empower customers across the food & beverage, dairy, life sciences, and industrial markets to optimize production processes through concentration, purification, and contaminant removal. We also support clients in recycling valuable process chemicals, achieving high-purity water, and treating wastewater for reuse or safe discharge, helping them enhance sustainability. Our success is built on the collaborative efforts of our global team of dedicated professionals. As we continue to grow, we seek talented individuals who share our passion for innovation. Join us today and help deliver Separation Technologies for a Better Future™ . How You'll Add Value… As a Process Engineer for the Food, Dairy and Beverages Markets you will be instrumental in driving our growth in the sanitary industrial markets. Your technical expertise, ability to build strategic partnerships, and internal collaboration will contribute significantly to Kovalus' continued success. What you'll do… Position Information Based in our headquarters in Wilmington, Massachusetts, reporting to the Sr. Director of Process Engineering. Flexible work environment (3 days in the office, 2 days WFH) Remote position can be considered for the right candidate. Key Responsibilities Develop detailed process design work for commercial membrane separation processes using Spiral wound, Hollow fiber and tubular configurations and MF, UF, NF and RO technology. This will involve the design and specification of filtration systems, selection of the treatment conditions, development of P&IDs, controls philosophies and control sequences. Participate in on-site commissioning of commercial plants and assisting in training of the end user's operators. Develop test protocols for field pilots for the purpose of obtaining performance data for commercial opportunities, and draft pilot reports. What you'll bring… Required Qualifications Minimum of 2 years of experience in process engineering design, with a focus on food, dairy or beverage applications. Ability to travel up to 40% at times (average 25%) within North America, working closely with regional sales teams and product management. At least 1 year experience with use of spiral wound membranes in industrial applications, including food & beverage, and life science facilities. Bachelor's degree in chemical engineering , or food technology , or in another related discipline. This position is not eligible for sponsorship Preferred Qualifications 5 or more years of experience working with membrane system design and operation, with primary focus of Food, dairy or beverages filtration. Hands on experience working on the startup and troubleshooting of full-scale commercial membrane filtration systems. Desire to be an innovator and major contributor in delivering cutting edge separation solutions to our customers. Excellent verbal and written communication skills, with demonstrated experience in customer service, presentations, and relationship-building. Kovalus offers a comprehensive package that includes: Medical (4 plan options), Dental (2 plan options) and Vision insurances; 401K (match & fixed company contribution); health savings and flexible spending accounts; company provided basic life insurance policy with the option of selecting additional voluntary life insurance for self, spouse or dependents; disability insurances (short-term policy is company paid & long-term is split between company and employee); voluntary insurance plans for accident, critical illness and hospital indemnity; business and personal travel insurance; 10 paid holidays; vacation time; sick time; employee assistance program; educational assistance program; referral bonus; bereavement leave. All benefits are subject to applicable plan and program terms (including eligibility terms) and may be subject to change. Compensation: $75k-$92,800K All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description At Kovalus Separation Solutions (KSS), we are committed to revolutionizing the separation industry through advanced technologies such as membrane filtration, ion exchange, evaporation, drying, and more. Our innovative solutions empower customers across the food & beverage, dairy, life sciences, and industrial markets to optimize production processes through concentration, purification, and contaminant removal. We also support clients in recycling valuable process chemicals, achieving high-purity water, and treating wastewater for reuse or safe discharge, helping them enhance sustainability. Our success is built on the collaborative efforts of our global team of dedicated professionals. As we continue to grow, we seek talented individuals who share our passion for innovation. Join us today and help deliver Separation Technologies for a Better Future™. How You'll Add Value… As a Process Engineer for the Food, Dairy and Beverages Markets you will be instrumental in driving our growth in the sanitary industrial markets. Your technical expertise, ability to build strategic partnerships, and internal collaboration will contribute significantly to Kovalus' continued success. What you'll do… Position Information Based in our headquarters in Wilmington, Massachusetts, reporting to the Sr. Director of Process Engineering. Flexible work environment (3 days in the office, 2 days WFH) Remote position can be considered for the right candidate. Key Responsibilities Develop detailed process design work for commercial membrane separation processes using Spiral wound, Hollow fiber and tubular configurations and MF, UF, NF and RO technology. This will involve the design and specification of filtration systems, selection of the treatment conditions, development of P&IDs, controls philosophies and control sequences. Participate in on-site commissioning of commercial plants and assisting in training of the end user's operators. Develop test protocols for field pilots for the purpose of obtaining performance data for commercial opportunities, and draft pilot reports. What you'll bring… Required Qualifications Minimum of 2 years of experience in process engineering design, with a focus on food, dairy or beverage applications. Ability to travel up to 40% at times (average 25%) within North America, working closely with regional sales teams and product management. At least 1 year experience with use of spiral wound membranes in industrial applications, including food & beverage, and life science facilities. Bachelor's degree in chemical engineering, or food technology, or in another related discipline. This position is not eligible for sponsorship Preferred Qualifications 5 or more years of experience working with membrane system design and operation, with primary focus of Food, dairy or beverages filtration. Hands on experience working on the startup and troubleshooting of full-scale commercial membrane filtration systems. Desire to be an innovator and major contributor in delivering cutting edge separation solutions to our customers. Excellent verbal and written communication skills, with demonstrated experience in customer service, presentations, and relationship-building. Kovalus offers a comprehensive package that includes: Medical (4 plan options), Dental (2 plan options) and Vision insurances; 401K (match & fixed company contribution); health savings and flexible spending accounts; company provided basic life insurance policy with the option of selecting additional voluntary life insurance for self, spouse or dependents; disability insurances (short-term policy is company paid & long-term is split between company and employee); voluntary insurance plans for accident, critical illness and hospital indemnity; business and personal travel insurance; 10 paid holidays; vacation time; sick time; employee assistance program; educational assistance program; referral bonus; bereavement leave. All benefits are subject to applicable plan and program terms (including eligibility terms) and may be subject to change. Compensation: $75k-$92,800K All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

The Manufacturing Engineer I is responsible for developing, designing, implementing and managing tooling, processes and procedures. This position will train all personnel on improvements or implementation of tooling, processes and procedures. This position is responsible for managing one or more projects that may include large capital expenditures or cost saving initiatives that positively impact safety, maintenance, quality, on time delivery (OTD), efficiency and inventory. The Manufacturing Engineer will support manufacturing for all types of continuous improvement activities and may also participate on or co-lead continuous improvement events. This position will also assist in the execution of Engineered to Order (ETO) sold projects as they are shared between design and manufacturing processes. Essential Job Functions * Design, justify, implement and manage capital projects including machine and fixturing purchases, shop floor layout designs, material handling equipment, product troubleshooting, etc. * Develop training materials and train all personnel on improved or new tooling, machines, processes and procedures. * Create and execute improvements to achieve goals established in Key Performance Indicators (KPIs). * Utilize scorecard performance and key metrics to prioritize efforts on tasks and projects. * Use real-time problem-solving tools to implement root cause solutions surrounding safety, quality, OTD, productivity, efficiency, cost savings, etc. * Support new product development and ETO projects ensuring successful manufacturability. * Implement and maintain 5S and housekeeping efforts throughout manufacturing and in collaboration with direct personnel. * Collaborate with the hourly production coworkers to improve their daily work as needed or required. * Collaborate and build relationship with Planners and Engineering to maintain routers in JDE to support accurate costing and profitability. * Collaborate and build relationships with other professional disciplines throughout the business on technical inquiries and needs. * Collaborate and build relationships with sales and marketing to develop new product offerings in a research and development capacity. * Provide training and guidance to other Manufacturing Engineering Technicians as needed. * Leverage knowledge of Manufacturing Engineer II in regards to design methodology, skills, and tools. * Travel including international, could be up to 15% as required by the project or other needs. * Must have a valid driver's license * Regular, in-person attendance due to necessary teamwork and personal interactive nature of this position * The ability to work in a constant state of alertness and safe manner. Knowledge, Skills, Abilities (Competencies) * Metal forming, welding, grinding, machining, manufacturing, including general CAM and/or layout experience. * Must have a thorough understanding of drafting and knowledge of engineering principals and techniques including various sheet metal fabrication processes and installation procedures * Knowledge of Lean manufacturing knowledge or related concepts. * Ability to work well under pressure and manage time effectively in a constantly changing and time sensitive environment while prioritizing multiple tasks in parallel. * Excellent communication skills both orally and written with keen attention to detail. * Ability to take initiative to develop new strategies and outside-the-box ideas. * Self-starter and goal oriented who will aggressively pursue successful resolution of safety risks in a timely manner. * Ability to work independently or collaboratively with a team. * Ability to establish and maintain working relationships with individuals at all levels of the organization. * Strong interpersonal skills with a mechanical aptitude. * Ability to efficiently utilize Microsoft Office. AutoCAD experience required. Education and Experience * Bachelor of Science in Engineering or similar degree program is required. One (1) to three (3) years related experience preferred. Base Compensation Range: $59,159 - $88,739 annually Variable Compensation Range: Incentive bonus eligibility up to 10% of gross annual salary base on company performance (as of 2024). Health and Ancillary Benefit Overview: * Medical, Dental & Vision Insurance with low employee premiums * Free off-site medical clinic * Company paid Life Insurance & Short-Term Disability * 401k - Employer match of up to 4.0% for coworker contributions of 8.0% or more * Company covers tuition costs up to $5,250.00 annually, contingent on course completion and grades * Paid Time Off and Sick, Family & Parental Paid Time Off * Ten (10) Paid Holidays * Four-day work weeks, varied shifts, and flexible remote work options depending on position * Career progression program for advancement * Free in-house welding, grinding & machine operation school * In-house training program Professional office environment with some time spent in a manufacturing shop. Use of standard office equipment (computers, phones, copiers, and filing cabinets, etc.). Frequent presence on the manufacturing floor as well as field operations. Exposure to conditions, such as: dust, fumes, noise and high-degree varying seasonal temperatures.

at Samtec, Inc Founded in 1976, Samtec is a leading global manufacturer of electronic interconnect solutions, generating $950 million in annual revenue. Our extensive product portfolio includes High-Speed Board-to-Board, High-Speed Cables, Optics for Mid-Board and Panel, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers drive innovation to optimize system performance and cost across all interconnect points, supported by a presence in 40+ international locations and products distributed in over 125 countries, ensuring exceptional customer service worldwide. Summary/Objective The Plating Process Development Engineer is responsible for research, development, and the integration of new plating/coating technology into Samtec production processes related to electrochemistry, plating, and other advanced/novel materials. This position will work closely with The New Ventures, Material Innovation, and Plating Process Engineering Groups to onboard new plating/coating technology.Essential Functions/ Responsibilities. Design and execute experiments related to novel materials and manufacturing processes in electrochemical deposition. Characterize deposited microstructures and coordinate internal/external analytical laboratory projects and efforts. Execute laboratory projects for the Materials Innovations Group and the Plating Process Engineering Teams. Support the research, development and implementation of new materials/technologies and the troubleshooting of plating quality issues. Work with chemical and equipment suppliers to introduce new plating processes and analysis methods. Integrate/transition novel plating technologies into Samtec's production processes and products. Facilitate new plating technologies through product testing and production processes qualifications. Maintain lab procedure documents, ensuring they are updated, meeting all requirements for safety and environmental standards. The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities. Required Experience and Education 10+ years experience in electro-plating, electrolytic plating, or any similar process concerning surface coatings. Scanning electron microscope, x-ray diffraction, elemental and chemical spectroscopic experience. Essential functions of the job include the ability to stand, lift, and walk on a continual basis. Experience in Reel-to-Reel plating / Strip Line plating is required. Must be willing to work in a chemical environment. Must be able to work with heavy drums of chemicals with a drum dolly. Facilitate new plating technologies through product testing and production processes qualifications. Must be a self-starter with strong teamwork skills. Must be able to work independently and learn quickly. Good communication skills both written and verbal. Preferred Experience and Education Bachelor's Degree in Chemistry, Chemical Engineering, Material Science or equivalent Training in Lean manufacturing, Continuous Improvement, Statistical Process Control, and Six Sigma Experience in the operation and maintenance of analytical equipment. Experience can supplement or replace educational preferences/requirements. SAMTEC, Inc. is an Equal Opportunity Employer and committed to creating a diverse environment. All employment decisions at Samtec are based in business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, pregnancy or parental status, age, disability, sexual orientation, gender and/or gender identity/expression, marital status, past or present military service, family medical history or genetic information, or any other status protected by applicable laws. Privacy Policy: *****************************************************

** Sandisk understands how people and businesses consume data and we relentlessly innovate to deliver solutions that enable today's needs and tomorrow's next big ideas. With a rich history of groundbreaking innovations in Flash and advanced memory technologies, our solutions have become the beating heart of the digital world we're living in and that we have the power to shape. Sandisk meets people and businesses at the intersection of their aspirations and the moment, enabling them to keep moving and pushing possibility forward. We do this through the balance of our powerhouse manufacturing capabilities and our industry-leading portfolio of products that are recognized globally for innovation, performance and quality. Sandisk has two facilities recognized by the World Economic Forum as part of the Global Lighthouse Network for advanced 4IR innovations. These facilities were also recognized as Sustainability Lighthouses for breakthroughs in efficient operations. With our global reach, we ensure the global supply chain has access to the Flash memory it needs to keep our world moving forward. **Job Description** ESSENTIAL DUTIES AND RESPONSIBILITIES: + In this position, the individual will be responsible for development of the future generation of 3D NAND flash. + The individual will contribute to defining new device architectures, developing scaling paths, process improvement and novel device operating strategy for cutting edge memory technologies. + The scope includes development of new types of device, design and process architectures involving novel materials, structures and operating algorithm to deliver industry leadership in performance, reliability, power and cost. + The individual will be responsible for understanding the existing technology limitation from first principle and creating innovative idea to solve problems. **Qualifications** **Required:** + PhD degree in Electrical Engineering, Materials Science, Applied Physics, or a related field. New or recent graduates with availability to start in July 2026 or later. + It requires in-depth knowledge of semiconductor device physics and/or nano-electronics. + The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment. + Good Problem-solving skills demonstrating good analytical capabilities, sound technical foundations, and creativity. + Feel comfortable to solve new problems outside your domain. + Familiarity with coding languages (such as Python and Perl) and statistical analysis software (such as Spotfire, Jump) is an advantage. + Knowledge of non-volatile memory and/or emerging memory is a plus. **Preferred Skills:** + Excellent writing, editing, communication and presentation skills + Detail-oriented and organized + Ability to work with multiple stakeholders and manage deadlines across projects **Additional Information** Sandisk is committed to providing equal opportunities to all applicants and employees and will not discriminate against any applicant or employee based on their race, color, ancestry, religion (including religious dress and grooming standards), sex (including pregnancy, childbirth or related medical conditions, breastfeeding or related medical conditions), gender (including a person's gender identity, gender expression, and gender-related appearance and behavior, whether or not stereotypically associated with the person's assigned sex at birth), age, national origin, sexual orientation, medical condition, marital status (including domestic partnership status), physical disability, mental disability, medical condition, genetic information, protected medical and family care leave, Civil Air Patrol status, military and veteran status, or other legally protected characteristics. We also prohibit harassment of any individual on any of the characteristics listed above. Our non-discrimination policy applies to all aspects of employment. We comply with the laws and regulations set forth in the "Know Your Rights: Workplace Discrimination is Illegal (************************************************************************************** " poster. Our pay transparency policy is available here (*********************************************************************************************** . Sandisk thrives on the power and potential of diversity. As a global company, we believe the most effective way to embrace the diversity of our customers and communities is to mirror it from within. We believe the fusion of various perspectives results in the best outcomes for our employees, our company, our customers, and the world around us. We are committed to an inclusive environment where every individual can thrive through a sense of belonging, respect and contribution. Sandisk is committed to offering opportunities to applicants with disabilities and ensuring all candidates can successfully navigate our careers website and our hiring process. Please contact us at jobs.accommodations@sandisk.com to advise us of your accommodation request. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. \#LI-TG1 **Compensation & Benefits Details** + An employee's pay position within the salary range may be based on several factors including but not limited to (1) relevant education; qualifications; certifications; and experience; (2) skills, ability, knowledge of the job; (3) performance, contribution and results; (4) geographic location; (5) shift; (6) internal and external equity; and (7) business and organizational needs. + The salary range is what we believe to be the range of possible compensation for this role at the time of this posting. We may ultimately pay more or less than the posted range and this range is only applicable for jobs to be performed in California, Colorado, New York or remote jobs that can be performed in California, Colorado and New York. This range may be modified in the future. + You will be eligible to participate in Sandisk's Short-Term Incentive (STI) Plan, which provides incentive awards based on Company and individual performance. Depending on your role and your performance, you may be eligible to participate in our annual Long-Term Incentive (LTI) program, which consists of restricted stock units (RSUs) or cash equivalents, pursuant to the terms of the LTI plan. Please note that not all roles are eligible to participate in the LTI program, and not all roles are eligible for equity under the LTI plan. RSU awards are also available to eligible new hires, subject to Sandisk's Standard Terms and Conditions for Restricted Stock Unit Awards. + We offer a comprehensive package of benefits including paid vacation time; paid sick leave; medical/dental/vision insurance; life, accident and disability insurance; tax-advantaged flexible spending and health savings accounts; employee assistance program; other voluntary benefit programs such as supplemental life and AD&D, legal plan, pet insurance, critical illness, accident and hospital indemnity; tuition reimbursement; transit; the Applause Program, employee stock purchase plan, and the Sandisk's Savings 401(k) Plan. + Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law.

Descripción Puesto en Samtec, Inc Founded in 1976, Samtec is a leading global manufacturer of electronic interconnect solutions, generating $950 million in annual revenue. Our extensive product portfolio includes High-Speed Board-to-Board, High-Speed Cables, Optics for Mid-Board and Panel, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers drive innovation to optimize system performance and cost across all interconnect points, supported by a presence in 40+ international locations and products distributed in over 125 countries, ensuring exceptional customer service worldwide. Summary/Objective The Plating Process Development Engineer is responsible for research, development, and the integration of new plating/coating technology into Samtec production processes related to electrochemistry, plating, and other advanced/novel materials. This position will work closely with The New Ventures, Material Innovation, and Plating Process Engineering Groups to onboard new plating/coating technology.Essential Functions/ Responsibilities. Design and execute experiments related to novel materials and manufacturing processes in electrochemical deposition. Characterize deposited microstructures and coordinate internal/external analytical laboratory projects and efforts. Execute laboratory projects for the Materials Innovations Group and the Plating Process Engineering Teams. Support the research, development and implementation of new materials/technologies and the troubleshooting of plating quality issues. Work with chemical and equipment suppliers to introduce new plating processes and analysis methods. Integrate/transition novel plating technologies into Samtec's production processes and products. Facilitate new plating technologies through product testing and production processes qualifications. Maintain lab procedure documents, ensuring they are updated, meeting all requirements for safety and environmental standards. The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities. Required Experience and Education 10+ years experience in electro-plating, electrolytic plating, or any similar process concerning surface coatings. Scanning electron microscope, x-ray diffraction, elemental and chemical spectroscopic experience. Essential functions of the job include the ability to stand, lift, and walk on a continual basis. Experience in Reel-to-Reel plating / Strip Line plating is required. Must be willing to work in a chemical environment. Must be able to work with heavy drums of chemicals with a drum dolly. Facilitate new plating technologies through product testing and production processes qualifications. Must be a self-starter with strong teamwork skills. Must be able to work independently and learn quickly. Good communication skills both written and verbal. Preferred Experience and Education Bachelor's Degree in Chemistry, Chemical Engineering, Material Science or equivalent Training in Lean manufacturing, Continuous Improvement, Statistical Process Control, and Six Sigma Experience in the operation and maintenance of analytical equipment. Experience can supplement or replace educational preferences/requirements.

Our Company PharMerica PharMerica is are seeking a seasoned Process Engineer with a strong background in pharmacy operations to drive continuous improvement and operational excellence across our pharmacy services. The ideal candidate will have 3-5 years of hands-on experience in process engineering. Experience working in a Long-Term Care (LTC) pharmacy environment is a plus. This role requires a strategic thinker with a passion for optimizing workflows, leveraging automation, and integrating emerging technologies such as Generative AI (GenAI), Large Language Models (LLMs), and Agentic AI. Remote opportunity. Applicants can live anywhere within the Continental USA. Travel: 25-50% Schedule: Monday - Friday, 8:00am - 5:00pm We offer: DailyPay Flexible schedules Competitive pay Shift differential Health, dental, vision and life insurance benefits Company paid STD and LTD Tuition Assistance Employee Discount Program 401k Paid-time off Tuition reimbursement Non-retail/Closed-door environment This position will be posted a minimum of 5 days Responsibilities Analyze existing pharmacy workflows and identify opportunities for standardization, process improvement, automation, and cost reduction Develop and maintain process maps, SOPs, and documentation to support operational consistency and compliance Lead Lean and Six Sigma initiatives to enhance efficiency, reduce waste, and improve service quality Collaborate with cross-functional teams including IT, operations, and clinical staff to implement innovative solutions Evaluate and integrate AI technologies (GenAI, LLMs, Agentic AI) to streamline decision-making, documentation, and customer service processes Monitor performance metrics and KPIs to assess the impact of process changes and drive data-informed decisions Support change management efforts and training programs to ensure successful adoption of new processes and technologies Qualifications Required Qualifications: Bachelor's degree in Engineering, Industrial Engineering, Pharmacy, or related field. 3-5 years of experience in process engineering, preferably in a pharmacy or healthcare setting. Proven expertise in Lean, Six Sigma, or other continuous improvement methodologies (Green Belt or higher preferred). Proficiency in process mapping tools (e.g., Visio, Lucidchart) and data analysis platforms (e.g., Excel, Power BI). Familiarity with automation technologies, GenAI, LLMs, and Agentic AI applications in operational settings. Strong analytical, problem-solving, and project management skills. Excellent communication and stakeholder engagement abilities. Preferred Qualifications: Experience in Long-Term Care (LTC) pharmacy operations. Exposure to regulatory compliance in pharmacy or healthcare environments. Experience with digital transformation initiatives or AI implementation in operational workflows. Key Competencies Strategic Thinking Innovation & Technology Adoption Process Optimization Cross-functional Collaboration Data-Driven Decision Making Change Management Travel Requirements: 25-50% travel About our Line of Business PharMerica, an affiliate of BrightSpring Health Services, is a full-service pharmacy solution providing value beyond medication. PharMerica is the long-term care pharmacy services provider of choice for senior living communities, skilled nursing facilities, public health organizations, and post-acute care organizations. PharMerica is one of the nation's largest pharmacy companies, offering unmatched company culture, employee development, and advancement opportunities. For more information, please visit ******************* Follow us on Facebook, LinkedIn, and X.

Introduction to BlueOval SK At BlueOval SK, we will lead the transformation of the electric vehicle (EV) battery business through partnership (Joint Venture formed by Ford and SK On) to provide products and processes to increase our customers' experience. As the future of BlueOval SK, you will help lead the battery revolution by working alongside our teams as we build the batteries required for electric vehicle business excellence. Ford and SK On are investing billions in Kentucky and Tennessee including building three state-of-the art battery manufacturing facilities between the two campuses at BlueOval City in Tennessee and BlueOval SK Battery Park in Kentucky. These brand-new advanced manufacturing facilities will use Ford's 100-years of automobile manufacturing expertise and SK On's 30+ years of electric vehicle battery expertise to become the world's best battery manufacturer. The Manufacturing / Process Engineer at BlueOval SK - BlueOval City in Stanton, Tennessee will have a unique, once-in-a-lifetime opportunity to be a key member of the start-up team, launching the facility from the ground up. Key Areas of Responsibility: Support Manufacturing Process Engineering activity for Final Assembly Drive continuous improvement in safety, quality and productivity Apply engineering principles and analytical techniques to establish and continuously improve manufacturing processes and products Develop action plans as required to investigate and prioritize quality concerns and verify corrective actions on internal processes and supplier processes Conduct job ergonomic evaluations and deliver corrective actions as required Analyze Cell / Array scrap root causes; engage in mapping and corrective actions to reduce waste Create process and instruction sheets supporting quality methods and processes Deliver capable processes and tools accordingly Lead role in resolving assembly related concerns. Lead variability reduction and lean manufacturing initiatives and best practices Ensure compliance to Plant, Corporate, Governmental and Environmental standards Support ISO 14001 compliance and support internal ISO auditing and compliance as required Identify OEE / throughput constraints and drive root cause improvements Minimum Requirements: Education: Bachelor's degree Experience: 5+ yrs of related experience Ability to support any shift in a 7-day work pattern Candidate must be flexible to significant travel during initial plant start-up phase Candidate must be willing to work remotely and in-person at temporary facilities as needed during initial plant start-up phase Successful candidate must be able to demonstrate leadership behaviors consisting of outstanding interpersonal, teambuilding, and communication skills Preferred Requirements: Education: Bachelor's degree in Engineering Experience: Effective oral and written communication skills Lean Manufacturing and Six Sigma experience 8D and 5Why corrective action and problem solving skills Lean Tools - 5S, Kanban, Poka-yoke, and Value Stream Mapping TQM and Kaizen Methods FMEA, PPAP, and DOEs experience Visual Factory Management Ergonomic analysis knowledge and experience About BlueOval SK At BlueOval SK, we will lead the transformation of the electric vehicle (EV) battery business through partnership (Joint Venture formed by Ford and SK On) to provide products and processes to increase our customers' experience. As the future of BlueOval SK, you will help lead the battery revolution by working alongside our teams as we build the batteries required for electric vehicle business excellence. We have a wide variety of opportunities for you to accelerate your career. The Opportunity Ford and SK On are investing billions in Kentucky and Tennessee including building three state-of-the art battery manufacturing facilities between the two campuses at BlueOval City in Tennessee and BlueOval SK Battery Park in Kentucky. These brand-new advanced manufacturing facilities will use Ford's 100-years of automobile manufacturing expertise and SK On's 30+ years of electric vehicle battery expertise to become the world's best battery manufacturer. For more information about BlueOval SK plans, please Follow this link. What you'll receive in return: As part of the BlueOval SK family, you'll enjoy excellent compensation and a comprehensive benefits package that includes generous paid time off (PTO), retirement contributions, incentive compensation and much more. You'll also experience exciting opportunities for professional and personal growth and recognition. If you have what it takes to help us lead the transformation of the EV battery business, we'd love to have you join us. Benefits Include: 401k plan with retirement planning services 401k company matching after completing three months of service Medical and prescription drug coverage Dental and vision coverage Preventative Care Eligibility for great ancillary benefits including: Flexible Spending Accounts (FSAs), Short-Term Disability (STD) and Long-Term Disability (LTD), Employee Basic Life and Accidental Death Dismemberment (AD&D) insurance, and Employee Supplemental Life Insurance Access to Paid Time Off (PTO) after completing probationary period and Emergency PTO Parental Leave Access to Ford Vehicle Discount Program Climate-controlled working environment For a full list of benefits, visit our website: ************************************ Candidates for positions with BlueOval SK must be legally authorized to work in the United States. BlueOval SK does not sponsor employment VISAs for candidates at this time. Verification of employment eligibility will be required at the time of hire. We are an Equal Opportunity Employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status or protected veteran status.