Packaging operator jobs in West Haven, CT

Nature and Scope This entry level position is a member of the Manufacturing Team. The Manufacturing Team is responsible for activities associated with the manufacture of safe, effective and sterile pharmaceuticals in accordance with company SOPs, policies and cGMPs. The Manufacturing Team ensure aseptic and sanitary conditions are maintained where required, that appropriate manufacturing area and equipment records are neat and accurate and that safe, effective and professional behavior is displayed at all times. In conjunction with Production Management, the Manufacturing Team provides input and assistance to other Departments as needed, playing a critical role in maintaining production schedules and meeting company goals. The Team Member will be able to participate in all aspects of the Filling Process. The Filling Process includes dispensing components, cleaning, assembling, and sanitizing small and large pieces of equipment, and aseptic filling in accordance with established production records in a concerted effort to manufacture sterile liquid pharmaceuticals. The Filling Process includes loading of glass vials, stoppers, caps, and seals into manufacturing machinery, operation of filling machine, operation capping machine, unloading of finished product from the manufacturing machinery and the line clearances of the manufacturing equipment. The Filling Operator I will assist with all activities associated with the filling process under the direct supervision of a Filling Operator II-III, Lead and/or supervisor. Essential Duties and Responsibilities Performs duties required in the washer/capper area to established standards of productivity and quality as per standard operating procedures. Adheres to good manufacturing practices, (GMP & cGMP). Perform duties according to the company's standard operating procedures, (SOPs). Operates washer and capper machines used in department. Accurately counts work done and keeps necessary records. Trays on containers and off loads work in process [WIP] to support filling windows. Cleans work areas as needed and documents in appropriate lob book. Notifies supervisor or lead person of any problems. Accurately completes all documentation associated with tasks performed. Stocks, gathers and stages manufacturing supplies and equipment. Gathers, stages and returns production materials as required to support manufacturing activities. Cleans and stores manufacturing equipment and areas as required to support manufacturing activities. Sanitization/disinfection of components, materials and production supplies to support the manufacturing process. Required to become gown qualified, maintain training status and wear gamma irradiated garments consisting of a coverall, hood, mask, gloves, boots and goggles. Required to become qualified cleaner for the aseptic processing area. Attends all training programs as required by Company SOPs, procedures and policies. Keeps work area clean and orderly. Education Requirements and Qualifications Minimum of high school diploma or GED preferred. Able to pass gowning qualification and Media Fill Qualification. Mechanical aptitude with the ability to assemble, troubleshoot and perform minor repairs on manufacturing equipment preferred. Ability to take feedback constructively and function in a team oriented work environment. Must be able to read documents in Standard English such as Standard Operating Procedures, maintenance schedules and operating manuals. Ability to work overtime as needed. Must become qualified to don Glass Washroom and APA gowning apparel. Must become qualified to perform Glass Washroom and APA cleaning. Must become qualified to operate washers and cappers. Must become qualified to operate aseptic fill room independently. Physical Environment and Requirements Physically able to wear cleanroom/protective gowning and equipment, including but not limited to gowning, goggles, face shields, masks, and protective gloves. PPE are essential for the health and safety of employees. Employee must be able to repeatedly lift and/or move up to 25 pounds. Employee must be able to stand for extended periods of time. Expected Hourly Rate: $26.97 The hourly rate rate displayed is the hourly rate of compensation for the role that the employer in good faith believes to be accurate at the time of the posting of an advertisement for the role. Actual compensation for the role will be based on a number of different factors including but not limited to the candidate's qualifications, education, knowledge, skills and experience. American Regent also offers a competitive total rewards package which includes healthcare, life insurance, profit sharing, paid time off, matching 401k as well as a wide range of other benefits. American Regent celebrates diversity and we are committed to creating an inclusive environment for all employees. We are an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, or protected veteran status. Applicants have rights under Federal Employment Laws. FMLA poster: ********************************************************** Know Your Rights: Know Your Rights: Workplace discrimination is illegal (eeoc.gov) Employee Polygraph Protection Act: ********************************************************* Alert: We're aware of individuals impersonating our staff to target job seekers. Please note: · All legitimate communication will come directly from a verified ARI recruiter either by phone or via an americanregent.com email address. · Our recruiting process includes multiple in person and/or video interviews and assessments. · If you are unsure about the legitimacy of a message, contact John Rossini at *************************** before responding. · We never request payment, bank information, or personal financial details during our offer process. Your security is important to us, and we encourage you to stay vigilant when job searching. American Regent Inc. endeavors to make *********************************** accessible to any and all users. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please email **************************************.

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Production OperatorThis position is responsible for daily operations of the production floor; ensuring the shift meets established safety, quality, and production goals in compliance with all applicable legal and food safety requirements. Essential Functions Responsible for daily activities of the production line(s), ensuring product adheres to Niagara's standard of safety, quality, and throughput. Accurately completes applicable quality and production reports hourly. Physical and visual inspection of product is required to prevent non-conforming goods. Correctly reports all quality defects to the appropriate team members and shift leadership. Adheres to the highest standards of company and plant safety programs, guidelines, rules, and regulations. Abides by Niagara's Good Manufacturing Practices (GMP) and Food Safety Standards at all times. Maintains general housekeeping in all areas of production and additional areas assigned by plant leadership. Maintains appropriate level of raw materials as required, to ensure production lines incur minimal downtime. Demonstrates the aptitude and skill to work in all assigned areas of production; troubleshoots minor production line issues and performs relief duties when required. Regular and predictable attendance is an essential function of the job. Ability to work 12 hour shifts, day or night, on a rotating 2-2-3 schedule or schedule as dictated by production demand. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 2 Years - Experience in Field or similar manufacturing environment 2 Years - Experience in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma or GED Preferred: Associate's Degree Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly$20.01 - $27.02 / Hourly Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

Carlisle Weatherproofing Technologies (CWT) is a leading supplier of building envelope solutions that effectively drive energy efficiency and sustainability in commercial and residential applications. We are looking for a Machine Operator to join our second shift EPS team in Prospect, CT. Shift: 6 pm-4:30 am Starting Pay: $23.81+$1.00 for shift differential Job Summary Operate machinery designed to perform a specific portion of the production process for Carlisle Companies Incorporated. Assist Operator II and Operator III on packing and end-of linework, and as needed. Overtime, no travel is required. Duties and Responsibilities: * Operates machinery of assigned department to complete assigned work order. * Receives and reviews work orders. * Communicates the required amount of material needed to perform tasks to other departments. * Continuous observation of machine operation to ensure optimal performance of standard work within the assigned department. * Performs hazard-based functions on machinery, including lock out/tag out and daily equipment inspection. * Stacks, sorts, and bundles material according to assigned department's standard work. * Occasional housekeeping tasks, 5S, and SQDC involvement. * Records data of manufactured material for quality control and improvement functions. * Achieves production goals while complying with all safety requirements. * Assists with quality checks to verify proper parameters are adhered to. * Assists Operators II & III in packaging and end-of-line work, and as needed. * Other duties as assigned. Required Knowledge/Skills/Abilities: * Highly motivated with a good, sound work ethic. * Must demonstrate safe working practices and possess great attention to detail. * Ability to follow Carlisle Companies Incorporated policies, procedures, and processes. * Good communication, organization, and time management skills. * Basic computer, mathematics, and problem-solving skills; ability to use a calculator. * Ability to use measuring devices (gauges, tapes, rulers). * Team player able to follow instructions from both management and peers. * Ability to learn and operate new equipment. * Expectation to understand, participate in, and support company COS initiatives, with focus on developing a lean mindset Education and Experience: * Required: * High School Diploma or GED is Preferred * Must be at least 18 years of age or older. * Prior experience in a manufacturing setting preferred. Working Conditions: * Fast paced manufacturing environment where workers are exposed to both ambient/outside temperatures and dust; working with mechanical parts and pinch points; exposure to increased noise levels. * Hours worked vary based on shift schedule and business volume. * Flexible to the possibility of overtime and weekend hours when required. * Heavy, stationary machinery on the manufacturing floor. * Radio, Calculator, Measuring Devices * Hand tools * Computer (Shop Floor and ERP) Personal Protective Equipment (PPE) Used: * Eye, head, and hearing protection is required at all times on the production floor. * Safety toe shoes (steel/composite) * Hi-Vis Vests * Other PPE as defined by management within the assigned department. BENEFITS AND PERKS Our employees' well-being is crucial to Carlisle's success. Despite the nationwide increase in healthcare costs, Carlisle has maintained the same employee premiums for four consecutive years by absorbing the rising medical insurance expenses. Furthermore, you have the flexibility to tailor a benefits program that perfectly suits your needs. Benefits offered: * Medical, Dental, and Vision insurance- DAY 1 * Life and Accidental Death & Dismemberment Insurance * Leave & Disability Income Protection (FMLA, LOA, PPL, STD, LTD) * Employee Assistance Program (EAP) * Health Advocate - health care concierge service * PTO - sick days, 11 holidays, vacation * 401K Retirement Savings Plan with company match * Employee Stock Purchase Plan * Flexible Spending accounts (commuter benefits, flexible spending accounts, health savings account) * College Scholarships for Dependents * Tuition Reimbursement

Job Description Qualifications: Education and/or Work Experience Requirements: At least (3) years experience in a production environment Experience with metal fabrication processes such as die forming, roll forming, welding strongly desired Press operation and setup strongly desired Experience with basic measuring equipment such as calipers or micrometers Experience reading and interpreting job instructions and blueprints Experience in a smaller production environment Experience with closely related seal products a plus Responsibilities: Perform specific metal fabrication operations as specified by supervisor. Read and interpret process sheets/work instructions to perform assigned tasks. Set up and operate both die forming and roll forming equipment. Measure work piece dimensions to ensure accuracy to blueprint. Work with manufacturing engineers and other production operators to resolve production issues.

North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies. Our products and services are used by the military, aerospace, and industrial markets, helping to advance technology and protect the free world. NAI was proud to be recognized as a Top Workplace on Long Island by Newsday! Our culture is very collaborative. We have team building events, company picnics, special event day and employee game room. Please visit our website at ******************** to see more about what makes us a unique place to work. Summary: The Production Operator works in an electronics manufacturing environment assembling printed circuit boards (PCBs). This role involves using computers and equipment to perform daily production tasks. Following instructions and maintaining attention to detail are essential to ensuring the quality of the products. Keeping the workspace clean and organized is a key part of maintaining high production standards. The Production Operator will be trained to operate various machines, including Pick and Place, Automated Optical Inspection (AOI), Selective Soldering equipment, and hand assembly. Flexibility is important, as the operator frequently moves between tasks and functional areas. Teamwork, punctuality, and communication are critical to the success of this role. Requirements * Organize and label products to ensure proper tracking during production. * Apply gels and adhesives to components as part of the assembly process. * Prepare electronic components for assembly into PCBs. * Use basic hand tools for mechanical assembly tasks. * Utilize machines to assemble printed circuit boards. Qualifications and Education Requirements: * High School Diploma or equivalent. Language Skills: * Fluent in English (reading, writing, and speaking). * Strong oral and written communication skills. Other Skills and Abilities: * Experience working in a team environment. * Ability to lift 40 pounds. * Ability to work on your feet. * Familiarity with basic hand tools. * Effective communication skills, both written and verbal. * Computer literate a plus * Ability to learn new skills (Certified Training will be provided). * Conscientious regarding quality, time management, teamwork, and safety. * Flexibility to train and move between functional areas. North Atlantic Industries offer comprehensive and competitive packages including: * Medical, Dental, and Vision Insurance * Company-provided Life and AD&D Insurance * Voluntary Supplemental Life Insurance * Long-term Disability Insurance * Flexible Spending Accounts (FSA) * Employee Assistance Program (EAP) * Tax-deferred 401K with company matching contributions. * Vacation, holidays, sick * Employee tuition reimbursement * Business casual dress environment * Schedule: M-F 1st Shift 7AM-3:30PM North Atlantic Industries (NAI) is proud to be an Equal Opportunity Employer and is committed to providing equal employment opportunity for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to any legally protected status. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at ************ or by email at ***********. As a federal government contractor, in accordance with applicable laws, regulations, and Executive Orders, North Atlantic Industries (NAI) is required to develop annual Affirmative Action Plans for Protected Veterans and Individuals with Disabilities. Any employees or applicants who wish to review the Affirmative Action Plan for Protected Veterans and Individuals with Disabilities can contact us by sending an email to *********** or by calling ************. Salary Description $18-$23 per hour

Hamilton Connections is looking for a shipping and packaging clerk for a company in New Milford, CT. The shipping and packaging clerk is responsible for scanning and visually checking all outbound orders. This is a temp-to-hire position. The hours are 8:15 a.m.-5 p.m., Monday-Friday. The pay is $17.50-$19 an hour. Job Responsibilities: Scan and visually check orders Handle and prepare chemicals for shipping Ensure compliance to guidelines by applying correct markings and labels to hazardous and non-hazardous shipments Prepare domestics hazardous and non-hazardous group shipping Create hazardous materials paperwork Process packages on computerized shipping systems Other duties as assigned Job Requirements: Shipping experience preferred Familiarity with DOT 49CFR guidelines beneficial Able to handle physical aspects of the job, including lifting up to 70 lbs. Computer skills, including experience with Microsoft Office suite Experience working with hazardous materials preferred High school diploma or equivalent Able to pass pre-employment screenings

Load and unload racks and baskets for plating and stripping line. Visual inspection of plating and stripping lines Prepare parts for elastomeric molding, including grit blast, cleaning, adhesive application, milling of rubber. Molding of elastomeric bearings, including cutting shot size, deflashing, and visual inspection. Operation of dry film and aluminum pigment coating equipment, including masking, cleaning, grit blast, spray coating, and cure. Maintain production lot information to assure all parts and lots are traceable. Maintain a safe working environment. Maintain cleanliness in the work area. Other duties as assigned by the supervisor. Attendance at work is an essential function of the job. SKILLS / CERTIFICATIONS: High School Degree, equivalent or the combination of work experience to the satisfactory of management. Mechanical Aptitude. Blueprint Reading. Ability to use various equipment including gauging/measuring devices, ovens, sandblaster, etc. AAP/EOE

Position Type: Full time, 40h/week. OT as business needs dictate FLSA Classification : Non- exempt (hourly) Salary Range: $24.00-27.00/ hour paid weekly . The actual pay range will depend on varying circumstances and individualized factors, such as job-related knowledge, skills, experience, and other objective business considerations. Reports to : Production Manager Company description: Roto North America is a subsidiary of Roto Window and Door Technology, a global leader in window and door hardware, with 15 production plants and more than 30 subsidiaries worldwide. Through its 2 companies, Roto Frank of America, Inc. and Roto Fasco Canada, Inc., Roto North America has been manufacturing and offering a variety of leading North American and European window and door hardware products in the USA and Canada. To learn more about Roto Frank of America please visit us at: Welcome - Roto North America Summary: The Machine Operator will be responsible for the advanced tasks of a Machine Operator, to include daily production and quality control of parts manufactured on the laser, injection moulding, machine programming, and operation of a component stamping press. Essential Functions: Accountable for production with machine operation and programming, to include injection moulding, laser, and component stamping press. Tasks: Able to set up and program injection molding machines. This includes insertion of molds and programming in all run criteria and adjusting as needed. Accountable for running daily production and performing hourly quality checks to ensure compliance with function, quality, and cosmetic specifications. Capable of using basic measuring equipment such as calipers, Ensure compliance. Observe all safety requirements. Creating nonconforming reports for out of specification product. Posting production orders in SAP. Inspects equipment prior to use to ensure proper setup and alignment; performs basic and routine adjustments. Able to maintain required efficiency rates. Conduct preventative maintenance on injection molding machines, dryers, and chillers. Able to train Machine Operator II employees on running equipment. Able to drive a forklift. Excellent organizational skills. General housekeeping of work area. Able to set up component stamping/laser/injection moulding machines. Employee must show up to work on time and be able to work overtime as needed. Performs other related duties as assigned. Minimum Required Education: High school diploma or equivalent required. Required Work Experience: 2 Years of related Manufacturing experience Work environment and Physical Requirements: Working conditions are based in a manufacturing setting. To perform this job successfully the individual must be able to stand and/or sit for prolonged periods of time. Must be able to traverse production facility and climb ladders. Must be able to lift and or move up to 45 pounds at a time. Must have manual dexterity in order to use tools or setup machines as directed. Perform repetitive tasks that entail frequent bending and stooping. Visual acuity to read instructions, operate machines, and inspect parts produced. Must wear personal safety equipment, as required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Benefits: Roto offers an attractive salary and benefits package: 401(k) 401(k) matching Employee assistance program Employee discount program Medical insurance Dental insurance Vision insurance Flexible spending account Health savings account Life insurance Short Term Disability insurance Voluntary Long Term Disability insurance Paid time off Paid Holidays

This opportunity is located within our Ensign-Bickford Aerospace & Defense Company business, a global leader of mission-critical hardware and systems solutions including precision energetics systems and innovative explosive solutions.Click here to learn more. Job Description The Machine Operator is an important member of the team that builds our products. This position produces high quality linear energetic product in accordance with specific engineering drawings and manufacturing instructions. Machine Operators are responsible for safety, quality and delivery of products for our Aerospace and Defense markets. This role will report to the Production Supervisor of Linear & Transfer Systems in our Simsbury, CT location on second shift. Responsibilities: Perform fabrication of linear energetic product as defined in Manufacturing Instructions using both machinery and tools Operate machines that load, swage, draw and form linear energetic product Operate machines that extrude and braid protective layers over linear energetic product Clean, measure, cut, sample, spool, coil and pack product Maintain quality and accuracy requirements Requirements: Must pass aptitude test Excels in a dynamic, changeable work environment; Energetic and positive; Ability to work independently High School diploma Minimum of 1 year of applicable work experience Ability to read and understand written instructions in English Contribute towards continuous improvement initiatives Must be able to pass company administered competency test Demonstrate capability to use basic measuring tools (caliper, micrometer, etc.) Background using 5S/Lean Manufacturing principles (preferred) The physical activities of this position include work lifting up to 50 pounds on a consistent basis, walking, standing, sitting, reaching, kneeling, talking and hearing. The physical demands and the work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status.

Packaging Technician Reports To: Production Assistant Manager & Production Supervisor FLSA Status: Non-Exempt The Packaging Technician is responsible for accurately and efficiently packaging dried flower, concentrates, oils, and pre-rolls in compliance with state regulations and Theraplant SOPs. This role supports daily production goals, equipment operations, and quality assurance standards in a fast-paced environment. Key Responsibilities Package and label cannabis products (flower, pre-rolls, concentrates, oils) to meet daily quotas and work orders. Set up, operate, sanitize, and troubleshoot packaging equipment. Collaborate with team leads to meet production goals; report issues as needed. Prepare case packs for storage and shipment. Track every step of packaging using QA/QC documentation and labor trackers. Inspect products for quality; address rejected units and labeling issues. Weigh product using scales and operate labeling equipment accurately. Follow all SOPs, safety protocols, and state regulations. Maintain a clean, organized, and safe work area. Adhere to a consistent full-time schedule with a strong work ethic. Qualifications High school diploma or equivalent. Previous cannabis packaging or related experience preferred. Ability to operate and troubleshoot advanced packaging equipment. Strong attention to detail and organizational skills. Ability to meet daily quotas and work well in a team setting. Familiarity with cannabis packaging regulations. Physical stamina to stand for long periods, lift/move heavy items, and perform repetitive tasks. Physical Demands The physical demands described here represent those necessary to perform essential job duties. Reasonable accommodations may be made to enable individuals with disabilities. Regularly required to stand for extended periods (up to eight-hour shifts). Frequent use of hands and fingers; must be able to talk and hear clearly. Frequent standing and walking; occasional sitting, climbing, or balancing. Regularly lift and/or move up to 50 lbs. Visual requirements include both close and distance vision. Compensation, Schedule & Benefits Compensation: $17.50/hour Schedule: Monday - Friday 8:00 am - 4:00 pm Benefits Include: 401(k) available after 2 months of employment Medical, dental, and vision insurance beginning on the 1st of the month after 60 days of employment Vacation and sick time available after 3 months of employment Equal Opportunity Employer We are an equal opportunity employer and do not discriminate based on race, color, religion, age, national origin, sex, gender identity or expression, disability, veteran status, or any other protected classification. Americans with Disabilities Act (ADA) Theraplant is committed to complying with the Americans with Disabilities Act (ADA) by providing reasonable accommodations and maintaining an inclusive and accessible workplace for all qualified individuals

The Packaging Operator II is responsible for safely operating the packaging equipment to package in process products in accordance with the Packaging Order while following SOPs and Maintaining 100% cGMP & compliance during operations. Essential Functions: Checks and verifies product/outserts/label as per product specification in the batch record, work order and packaging records. Checks proper setting and operation of all the packaging equipment located in the packaging rooms. Responsible for ensuring the packaging line/room is clean, organized and ready for packaging operations. Performs packaging batch record documentation. Perform in-process checks during packaging operation and record the data in packaging batch record. Checks calibration status of all scales, balance and equipment. Responsible for disposal of rejected products and packaging components in the designated area. Additional Responsibilities: Performs other functions as required or assigned Complies with all company policies and standards. May monitor equipment performance. Education: High School or GED General HS Curriculum/GED - Preferred - Experience: 2 years or more in With HS/GED -Experience in Pharmaceuticals Packaging/ Manufacturing 3 years or more in Less than HS/GED- proven related experience in Pharmaceuticals Manufacturing environment. Skills: Required to read, write, and communicate in English. - Intermediate High school level math and mechanical skills. - Intermediate Flexible to work extended hours and weekends when required. - Intermediate Ability to work as part of a team. - Intermediate Attention to detail and accuracy. - Intermediate Specialized Knowledge: Knowledge of safety, cGMP and SOP Additional Requirement: This position requires successful completion of an OSHA-compliant Respirator Fit Test. The hourly base salary for this position ranges from $18.50 to $20.00 per hour. Amneal ranges reflect the Company's good faith estimate of base salary that Amneal reasonably believes that it will pay for said position at the time of the posting. Individual compensation will ultimately be determined based on a variety of relevant factors, including but not limited to, qualifications, geographic location and other relevant skills. At the heart of our Total Rewards commitment is a comprehensive, flexible and competitive benefits program for eligible positions that enables you to choose the plans and coverage that meet your personal needs. This includes above-market, diverse and robust health and insurance benefits to meet the varied needs of our employees as well as a significant 401(k) matching contribution to help our employees save for retirement. We also promote employee well-being with programs that helps you enjoy your career alongside life's many other commitments and opportunities.

Machine Operator | Visual Full-time | Permanent | Hourly 2nd Shift *We are not currently working with third party agencies on this role. About Us: Hobson & Motzer is now part of Vantedge Medical. Vantedge Medical is the premier metals-based med-tech solutions partner from concept to full-scale manufacturing. We are at the forefront of precision engineering and innovation, specializing in the development and manufacturing of vital components for medical markets such as Robotic Assisted Surgery, Orthopedics, Surgical Instruments, Dental, and more. Our teams work in unison, collaborating and problem-solving to serve the manufacturing needs of the top Medical Original Equipment Manufacturers (OEMs) around the globe. Making a difference in the lives of patients and their families drives us to go above and beyond every day. With a steadfast commitment to advancing medical technology, we take immense pride in the work we do - and have a lot of fun doing it. Hobson & Motzer is a vertically integrated manufacturer of precision metal components and assemblies serving the needs of the medical device market and other advanced industries. We operate two manufacturing plants with primary operations-and headquarters-centrally located in Durham, CT; our Advanced Manufacturing Center is just a few miles away in Wallingford, CT. Description. Join an organization that has a reputation for outstanding leadership, innovation, and expertise. Our employees use their creativity and talent to invent new solutions, meet new demands, and offer the most effective services and solutions in the industry. About this Opportunity: This position safely and effectively operates all machinery and equipment in the Assembly, CNC, and Finishing departments, while adhering to all documented instructions and procedures. Responsibilities: Operate various machining equipment such as air presses, milling and drilling machines, pad printers, laser welders and cutters per M.O.I.'s/Work Instruction. Perform prepacking, gauging and visual inspections per M.O.I.'s./Work Instruction; verify gauges are correct and calibrated prior to starting every operation. Ensure product ID and traceability is maintained by accurately filling out required paperwork (Followers, Inspection Ticket, etc.). Accurately enter labor hours in MES; monitor personal time and attendance weekly. Maintain an organized, clean and safe work environment and follow 6S standards. Properly follow all H&M procedures and policies. Use correct P.P.E. per JHAs and Job Description, when safety shoes are required (Finishing), they must be rated F2412 and F2413. Participate in Continuous Improvement activities. including the Idea System. Perform all other duties as assigned. Requirements High School, or Technical School Diploma, or General Education Degree (GED) preferred. 3+ Months of Manufacturing experience preferred. Able to perform essential duties satisfactorily. Ability to read and comprehend simple instructions (MOI;s Work Instructions, Quality Bulletin, Job Followers, etc.). Ability to effectively communicate in one-on-one and small group situation with other employees. Ability to do basic math. Ability to participate in small problem-solving groups. Ability to work overtime and Saturdays on an as needed basis.

EDM Machine Operator needed in Meriden, CT for Tool & Die Manufacturer Pay: based on experience Hours: 7am-3:30 Monday- Friday EDM Machine Operator Responsibilities: Programming: Entering programs into the machine, often using G-code, and utilizing CAD/CAM software. Setup: Preparing the machine and workpieces by setting up the correct parameters and fixtures. Operation: Monitoring the machining process and making adjustments as needed to maintain quality and efficiency. Inspection: Measuring and inspecting finished parts to ensure they meet all specified dimensions and quality standards. Maintenance: Performing routine maintenance and troubleshooting issues to keep the machinery in good working order. EDM Machine Operator Requirements: Mechanical aptitude: A strong understanding of how machines work. Precision measurement: Proficiency with precision measuring tools and the ability to read technical drawings. Technical knowledge: Familiarity with EDM machines (such as wire and sinker types), CNC programming (like G-code), and CAD/CAM software. Soft skills: High attention to detail, problem-solving skills, and good communication are crucial. Education: a certificate or degree in a machine trade from a technical school or equivalent APPLY TODAY! for immediate consideration to our EDM Machine Operator positions!

Play a key role in delivering high-quality medications and supplements to consumers worldwide. We're seeking a machine operator who thrives in a clean, regulated manufacturing environment. Help shape the future of wellness and apply today! Tower Laboratories is a leading effervescent product manufacturer in the U.S. We develop and manufacture over-the-counter medications, prescription pharmaceuticals, nutritional supplements, soft drink tablets and other consumer products on a contract basis. We are continually expanding our effervescent product base and currently have several new and interesting products in the research and development phase right now. We are a family owned company and have been in business for over 40 years. ****************** We have positions open at our CENTERBROOK location! $17.00-$18 to start for 1st shift Plus, regular pay increases as training progresses. POSITION SUMMARY: We are willing to train the right, motivated individual to learn our tableting and packaging process. Operate and set up a wide range of manufacturing equipment which includes high-speed automated tablet presses and packager production line. Perform in-process testing and complete the necessary paperwork. Responsible for the efficient production of a high quality product. Perform all work in adherence to safety precautions, regulations and Good Manufacturing practices (cGMP) as required by the FDA. Tower Labs' production environment is clean and temperature and humidity controlled. Uniforms provided free of charge. POSITION QUALIFICATIONS: Dependability a must; we will be investing in you with training Mechanical aptitude with ability to troubleshoot and problem solve Basic math skills Ability to read and follow directions, complete paperwork and communicate effectively in English Ability to concentrate and focus on task under stressful and/or distracting conditions Ability to be a team player; good interpersonal skills Self starter with high level of motivation Ability to stand for entire shift, walk, bend, reach, climb ladder Ability to lift up to 40lbs on an occasional basis Ability to wear face mask, safety shoes & glasses, hairnet and gloves. No experience required, we will train! BENEFITS: Health insurance Dental insurance 401(k) 401(k) matching Employee assistance program (free counseling) Flexible spending account (FSA) Health Savings Account (HSA) Health Reimbursement Arrangement (HRA) Disability insurance Life insurance Paid time off Referral program Tuition reimbursement Vision insurance Free uniforms Safety shoe & Rx glasses reimbursement SCHEDULE: 8 hour shift Monday to Friday Day shift Night shift Overtime voluntary Full time SHIFT AVAILABILITY: 1st shift: 7:30 AM - 4:00 PM, Monday through Friday We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies. Our products and services are used by the military, aerospace, and industrial markets, helping to advance technology and protect the free world. NAI was proud to be recognized as a Top Workplace on Long Island by Newsday! Our culture is very collaborative. We have team building events, company picnics, special event day and employee game room. Please visit our website at ******************** to see more about what makes us a unique place to work. Summary: The Production Operator works in an electronics manufacturing environment assembling printed circuit boards (PCBs). This role involves using computers and equipment to perform daily production tasks. Following instructions and maintaining attention to detail are essential to ensuring the quality of the products. Keeping the workspace clean and organized is a key part of maintaining high production standards. The Production Operator will be trained to operate various machines, including Pick and Place, Automated Optical Inspection (AOI), Selective Soldering equipment, and hand assembly. Flexibility is important, as the operator frequently moves between tasks and functional areas. Teamwork, punctuality, and communication are critical to the success of this role. Requirements * Organize and label products to ensure proper tracking during production. * Apply gels and adhesives to components as part of the assembly process. * Prepare electronic components for assembly into PCBs. * Use basic hand tools for mechanical assembly tasks. * Utilize machines to assemble printed circuit boards. Qualifications and Education Requirements: * High School Diploma or equivalent. Language Skills: * Fluent in English (reading, writing, and speaking). * Strong oral and written communication skills. Other Skills and Abilities: * Experience working in a team environment. * Ability to lift 40 pounds. * Ability to work on your feet. * Familiarity with basic hand tools. * Effective communication skills, both written and verbal. * Computer literate a plus * Ability to learn new skills (Certified Training will be provided). * Conscientious regarding quality, time management, teamwork, and safety. * Flexibility to train and move between functional areas. North Atlantic Industries offer comprehensive and competitive packages including: * Medical, Dental, and Vision Insurance * Company-provided Life and AD&D Insurance * Voluntary Supplemental Life Insurance * Long-term Disability Insurance * Flexible Spending Accounts (FSA) * Employee Assistance Program (EAP) * Tax-deferred 401K with company matching contributions. * Vacation, holidays, sick * Employee tuition reimbursement * Business casual dress environment * Schedule: M-F 2nd Shift 3PM-11:30PM North Atlantic Industries (NAI) is proud to be an Equal Opportunity Employer and is committed to providing equal employment opportunity for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to any legally protected status. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at ************ or by email at ***********. As a federal government contractor, in accordance with applicable laws, regulations, and Executive Orders, North Atlantic Industries (NAI) is required to develop annual Affirmative Action Plans for Protected Veterans and Individuals with Disabilities. Any employees or applicants who wish to review the Affirmative Action Plan for Protected Veterans and Individuals with Disabilities can contact us by sending an email to *********** or by calling ************. Salary Description $18-$23 per hour +Night Differential

Job Description Packaging Technician Reports To: Production Assistant Manager & Production Supervisor FLSA Status: Non-Exempt The Packaging Technician is responsible for accurately and efficiently packaging dried flower, concentrates, oils, and pre-rolls in compliance with state regulations and Theraplant SOPs. This role supports daily production goals, equipment operations, and quality assurance standards in a fast-paced environment. Key Responsibilities Package and label cannabis products (flower, pre-rolls, concentrates, oils) to meet daily quotas and work orders. Set up, operate, sanitize, and troubleshoot packaging equipment. Collaborate with team leads to meet production goals; report issues as needed. Prepare case packs for storage and shipment. Track every step of packaging using QA/QC documentation and labor trackers. Inspect products for quality; address rejected units and labeling issues. Weigh product using scales and operate labeling equipment accurately. Follow all SOPs, safety protocols, and state regulations. Maintain a clean, organized, and safe work area. Adhere to a consistent full-time schedule with a strong work ethic. Qualifications High school diploma or equivalent. Previous cannabis packaging or related experience preferred. Ability to operate and troubleshoot advanced packaging equipment. Strong attention to detail and organizational skills. Ability to meet daily quotas and work well in a team setting. Familiarity with cannabis packaging regulations. Physical stamina to stand for long periods, lift/move heavy items, and perform repetitive tasks. Physical Demands The physical demands described here represent those necessary to perform essential job duties. Reasonable accommodations may be made to enable individuals with disabilities. Regularly required to stand for extended periods (up to eight-hour shifts). Frequent use of hands and fingers; must be able to talk and hear clearly. Frequent standing and walking; occasional sitting, climbing, or balancing. Regularly lift and/or move up to 50 lbs. Visual requirements include both close and distance vision. Compensation, Schedule & Benefits Compensation: $17.50/hour Schedule: Monday - Friday 8:00 am - 4:00 pm Benefits Include: 401(k) available after 2 months of employment Medical, dental, and vision insurance beginning on the 1st of the month after 60 days of employment Vacation and sick time available after 3 months of employment Equal Opportunity Employer We are an equal opportunity employer and do not discriminate based on race, color, religion, age, national origin, sex, gender identity or expression, disability, veteran status, or any other protected classification. Americans with Disabilities Act (ADA) Theraplant is committed to complying with the Americans with Disabilities Act (ADA) by providing reasonable accommodations and maintaining an inclusive and accessible workplace for all qualified individuals

Entry level role in the Coating Department. Coating Operator is responsible for safely operating the coating equipment and to ensure Coating Operations are completed in adherence to Standard Operating Procedures and maintaining 100% cGMP & compliance. Schedule: 2nd Shift 3:30pm - 12:00am Monday to Friday Essential Functions: * Records and maintains the production batch record during the coating operation. * Observes machine gauges and equipment calibration status and reports any deviations to Coating Supervisor. * Operates auxiliary equipment used in loading coating pans. * Cleans and organizes coating room, checks and verifies weight of tablets received from Compression, reports deviation. * Weighs and divides coating solution in number of parts as per production batch record. * Checks and verifies coating material dispensed by Pharmacy before making coating solution as per production batch record. Additional Responsibilities: * Other duties as assigned.

Multiple Machine Operator Needed across Manufacturing facilities near Meriden, and Hartford CT! Entry - Mid level positions available! Multiple shifts and pay rates available! Willing to train the right candidate with technical schooling, machine operating, or metal cutting background! The Responsibilities for Machine Operators & Assemblers are: Set-up, adjust & operate machines Perform assembly work at various stations within the facility Using hand tools and mechanical equipment to produce structurally sound products Make minor repairs & adjustments to machine tools & equipment as required to support production demands. Westaff Offers Machine Operators and Assemblers: Free online classes Weekly Pay Medical, Vision, and Dental Opportunities for advancement Apply Today for Immediate Consideration! Military and Veterans are encouraged to apply!

Full-time Description About Us: Hobson & Motzer is now part of Vantedge Medical. Vantedge Medical is the premier metals-based med-tech solutions partner from concept to full-scale manufacturing. We are at the forefront of precision engineering and innovation, specializing in the development and manufacturing of vital components for medical markets such as Robotic Assisted Surgery, Orthopedics, Surgical Instruments, Dental, and more. Our teams work in unison, collaborating and problem-solving to serve the manufacturing needs of the top Medical Original Equipment Manufacturers (OEMs) around the globe. Making a difference in the lives of patients and their families drives us to go above and beyond every day. With a steadfast commitment to advancing medical technology, we take immense pride in the work we do - and have a lot of fun doing it. Hobson & Motzer is a vertically integrated manufacturer of precision metal components and assemblies serving the needs of the medical device market and other advanced industries. We operate two manufacturing plants with primary operations-and headquarters-centrally located in Durham, CT; our Advanced Manufacturing Center is just a few miles away in Wallingford, CT. Description. Join an organization that has a reputation for outstanding leadership, innovation, and expertise. Our employees use their creativity and talent to invent new solutions, meet new demands, and offer the most effective services and solutions in the industry. SUMMARY To safely and effectively operate all Machinery and Equipment in the Secondary Production Department by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Operate various Machining, Assembly, Printing and Finishing Machines and Equipment per M.O.I.'s. Machines such as, Presses, Milling Machines, Laser Welders, Laser Cutters, Spot Welders, Printers, Tweaking Tools etc... Perform gauging and visual inspections per M.O.I.'s. Fill out required paperwork (Followers, Inspection Ticket, etc.). Maintain on organized, clean and safe work environment and follow 6S standards. Properly follow all safety procedures and policies. Use correct P.P.E. Participate in Continuous Improvement activities. Perform other tasks as assigned by supervisor. May be assigned to work in other departments. SUPERVISORY RESPONSIBILITIES Responsible for own work and not normally required to direct or supervise other personnel, but may occasionally instruct or show another employee how to perform the work. SCOPE OF RESPONSIBILITY Duties are generally prioritized, allowing employee to perform independently, with intermittent close supervision, in conformance with written instructions, established schedules, and pre-determined priorities. Problems not clearly defined by written directives or instructions are reviewed with supervisor to determine course of action. Requirements QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High School, or Technical School Diploma, or General Education Degree (GED). No prior experience or training required. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance. REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. CERTIFICATES, LICENSES, REGISTRATIONS N/A PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee frequently is required to sit. The employee is occasionally required to walk; stoop, kneel, crouch, or crawl; and talk or hear. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and vibration. The noise level in the work environment is usually moderate. Wearing protective hearing equipment is recommended and safety glasses are required. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and vibration. The noise level in the work environment is usually moderate. Wearing protective hearing equipment is recommended and safety glasses are required.