Painter jobs in Idaho

An Experienced Body Shop Painter is responsible for refinishing vehicles to meet pre-accident condition or industry standards of quality. The painter oversees paint department and assistants / prep techs and reports to the production manager. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: * Report to Body Shop Foreman or Body Shop Manager, and will be assigned duties on a daily basis. * Maintain Proficiency of 70% or better, billing a minimum of 5.6 hours per day. * Keep area safe and clean. * Follow all safety measures for personal and environment safety. * Wear all appropriate safety equipment (PPE) for each specific task; for eyes (goggles, face shields), hands (gloves), lungs (respiratory systems, dust masks), skin (protective suit). * Examine damaged vehicles and estimates of repair cost. Immediately report any hidden damage to supervisor. * Report any lost or broken parts to the supervisor. * Maintain all body shop equipment in good safe working condition. * Maintain spray booth and mixing equipment. Keep mixing room in good working condition. * Check body repairs before primer is applied. * Maintain a level of quality to industry standards. * Keep repaints to a minimum. * Must remove all dirt and runs from painted areas. * Clean paint areas, tools and equipment. * Mix and apply primers and sealers, sand and prep prime surfaces for finish paint applications * Keep production manager aware of status. * Clean grease and dirt from product. * Apply masking tape over parts and areas that are not to be coated. * Fill cavities and dents with putty to attain smooth surface. * Ability to multi-task under pressure. * Alert the production manager to any unusual problems and delays. * Must demonstrate positive corporate citizenship and the Rush Driving Principles. * Maintain safe work environment. * Maintain professional appearance. * As a condition of continued employment, the employee is required to exhibit positive corporate citizenship, with demonstrated ability to positively interact with others, follow required Company policies and procedures which include but are not limited to policies regarding conduct, record keeping, and safety. As a condition of continued employment the employee is required to refrain from any behavior that is construed as sexual harassment, harassment and/or creating or participating in a hostile work environment, and/or violence in the workplace. Benefits: * We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: * High school diploma or general education degree (GED). * 3 years experience in commercial vehicle painting and refinishing or similar position. * Valid driver's license and insurability. * Proficiency with related hardware/software systems as needed to fully execute the duties required. * General office skills and knowledge of equipment and systems including but not limited to filing systems, use of copiers, facsimile machines, and other communication or electronic equipment as may be applicable. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader. Minimum Pay Rate USD $30.00/Hr. Maximum Pay Rate USD $40.00/Hr.

Full-time Description Introduction The Maintenance Apprentice will perform work on equipment, aircraft, and facilities at Empire Aerospace; under the guidance of maintenance, structure, avionics, composite, lead technicians, and supervisors. DUTIES AND RESPONSIBILITIES Maintenance Apprentice works on aircraft, components or related parts of aircraft. Are responsible to perform work outlined on applicable work forms in accordance with company policies and procedures, manufacturer's manuals, and FAA requirements. Comply with Empire policies, procedures, and specifications set forth in Empire Aerospace repair station manual, other customer maintenance policies and procedures (as applicable), manufacturer's manuals, technical data, and current federal aviation regulations. Perform cabin interior maintenance/cleaning and general aircraft cleaning. Maintain a clean, safe, and orderly work area. This includes: ensuring that parts removed are properly tagged and controlled, shop supplies and equipment are put away when not in use, and all other responsibilities related to shop cleanliness. Ensure that all work for which he/she is responsible for, is properly performed, inspected, and documented. Properly and efficiently use all tools, parts, equipment, and materials provided by Repair Station. Properly document all on-the-job training received during the performance of his/her duties. Facilitate maintenance on ground support equipment and facilities. Other related duties as assigned. Requirements Education and experience High school diploma or equivalent is preferred. The Maintenance apprentice should have appropriate mechanical experience as evident by employment history, education, personal interview, or practical test showing mechanical ability. Good oral and written communication skills with the ability to read, write, and understand the English language. Working knowledge of common hand tools and how to work safely. Must posses basic common hand tools to perform maintenance tasks. Must adhere to the company's FAA/DOT required Drug and Alcohol Program. WORKING CONDITIONS Work will be performed in a hangar environment and may require considerable outside work. Work may be done at different locations as needed. Apprentice will be exposed to noise and hazards associated with aircraft maintenance. Requires standing, walking, sitting, bending and stooping for extended periods of time. May be required to lift, up to 80 pounds, plus ladder/lift usage. Requires manual dexterity, speaking, seeing and hearing to conduct business. Empire Airlines is a drug, alcohol and smoke-free workplace. PAY & BENEFITS Starting pay for this position is $21 per hour. With 36 months of documented service the apprentice may be elidable to apply for their A/P with the Federal Aviation Administration in accordance with their policies. Benefits include Medical, Dental, Vision, 401k, PTO, Paid Holidays, Travel Benefits and more!

Minimum: Maximum: Location:Boise, IdahoJob Type:Full time Job Title:Journeyman Sign PainterJob Description: GENERAL PURPOSE: A journeyman automotive painter performs skilled painting activities in the production and repair of signs within budget. ESSENTIAL DUTIES & RESPONSIBILITIES: Read job orders and inspect work pieces to determine work procedures and materials required Prepares new signs, existing signs, sign cabinets, and sign lettering for painting Select and mix ingredients to prepare coating substances according to specifications, using paddles or mechanical mixers Apply coatings, such as paint, faux finishes, to protect or decorate work piece surfaces, using spray guns, pens, or brushes Maintain production schedules and manage time to complete paint related tasks Examine finished surfaces of work pieces to verify conformance to specifications; then retouch any defective area Loads and unloads signs Clean and maintain work area to provide a safe and organized work environment Work safely to prevent on the job injuries following all safety regulations MARGINAL DUTIES & RESPONSIBILITIES: Cleans and maintains equipment Delivers signs to Installation crew Performs other functions as necessary or as assigned NATURE OF WORK CONTACTS: Interacts with installation journeyman, apprentices and helpers Interacts with designers Interacts with other departments TRAINING & QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. A High School Diploma or GED and two or more years of relevant experience involving demonstrated abilities in painting, including mixing and applying paints, reading blueprints and work orders; or any combination of training, education and experience which provides the following knowledge, abilities, and skills. Knowledge involving mixing and spraying paints and color theory is required Ability to organize, prioritize and coordinate multiple work activities to meet critical deadlines, as well as working independently Ability to deal effectively and tactfully with a wide variety of individuals in person on telephone Ability to operate computer, telephone, and other office equipment Strong math skills and the ability to read, interpret and understand blueprints and specifications Strong work ethic with an enthusiastic, positive attitude, and the highest level of integrity Maintain regular and timely attendance Valid Driver's License PHYSICAL/SENSORY DEMANDS: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is generally performed in a shop environment and exposed to paints. While performing the duties of this job, the employee is regularly required to: stand for long periods of time; use computer to enter data, use telephone to converse with customers, staff, and other departments; perform repetitive wrist, hand and/or finger movement. The employee is regularly required to: talk, feel the attributes of objects, grasp, push, and reach with arms or hands. Specific vision abilities include: clarity of vision at 20 inches or less; ability to adjust eye to bring an object into sharp focus. The Employee must have ability to climb, crawl, bend, lift 50 pounds and operate heavy equipment. We maintain a drug free workplace. We test for marijuana. Young Electric Sign Company is an EEO/AA employer. We welcome all qualified jobseekers. Jobseekers will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, religion or other legally protected status.

Job Description Join Our Team as Front of House Help at Seoul Street Cafe (Meridian)! Are you passionate about creating memorable experiences for guests? Do you thrive in a fast-paced, customer-focused environment? At Seoul Street Cafe, located in Meridian, ID, we're all about bringing the vibrant flavors of Korean cuisine to life while delivering exceptional service. If you're ready to be the friendly face that welcomes our guests, we'd love to hear from you! What You'll Do: As a member of our Front of House team, you'll play a key role in ensuring every guest feels at home. Your responsibilities will include: - Greeting guests with a warm and welcoming attitude. - Taking orders accurately and efficiently, while providing menu recommendations when needed. - Serving food and drinks with attention to detail. - Maintaining a clean and organized dining area. - Assisting with any additional tasks to keep operations running smoothly. What We're Looking For: To thrive in this role, you'll need: - At least 1 year of experience in a customer-facing role, preferably in the food service or hospitality industry. - Strong communication and interpersonal skills. - A positive, team-oriented attitude and a passion for providing excellent service. - The ability to multitask and stay calm under pressure. Perks of Joining Our Team: We value our team members and want you to enjoy your time with us! Here's what we offer: - Free food and drinks during your shifts-because great food is even better when shared. Our Culture and Values: At Seoul Street Cafe, we're more than just a restaurant-we're a community. We believe in fostering a supportive and inclusive environment where everyone feels valued. Our team is passionate about sharing the rich flavors of Korean cuisine with our guests, and we take pride in delivering authentic experiences with a personal touch. Ready to Apply? If you're excited about joining a team that's all about great food, great service, and great people, we'd love to hear from you! Apply today and take the first step toward becoming part of the Seoul Street Cafe family. Full or part time we are now hiring! By applying to this job, you agree to receive periodic text messages from this employer and Homebase about your pending job application. Opt out anytime. Msg & data rates may apply. Powered by Homebase. Free employee scheduling, time clock and hiring tools.

of **Industrial Painter** within our team. This role offers the opportunity to work on large-scale industrial mining equipment, including dump bodies, using HVLP sprayers. **Job Description:** As an Industrial Painter, you will be responsible for: + Painting large industrial mining equipment using HVLP sprayers. + Sanding and prepping parts for painting. + Performing wet painting and spray-painting tasks. + Assisting in sandblasting and operating in a paint booth. + Supporting other duties, assignments, and special projects as required. **Essential Skills:** + Proficiency in HVLP sprayers and spray guns. + Experience with paint preparation, sanding, and prepping. + Minimum one year of experience in an industrial/manufacturing environment. + Ability to pass a respirator test. **Additional Skills & Qualifications:** + Background in wet paint or automotive painting. + Comfortable working at heights, bending, and twisting. + Ability to wear protective gear covering face/head and shoulders. + Capability to handle strong odors and work in varying temperatures. **Why Work With Us?** We offer steady employment through 2026, excellent career growth opportunities, and a comprehensive benefits package including: + Bonus potential + Life, medical, dental, and vision insurance + Paid holidays and vacation + 401(k) with matching contributions Our workplace is smoke-free and drug-free, ensuring a healthy and supportive environment. **Work Environment:** You will be part of a collaborative team of four painters, working in a well-ventilated paint booth. PPE such as eyewear and earplugs will be provided, and steel-toed boots are required. **Job Type & Location** This is a Contract to Hire position based out of Post Falls, ID. **Pay and Benefits** The pay range for this position is $23.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Post Falls,ID. **Application Deadline** This position is anticipated to close on Dec 5, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

At National Coatings, integrity, experience, and quality are the heart of everything we do. These values guide us in delivering high-performance coating solutions that are innovative, durable, and built to last. With decades of expertise, we take pride in protecting and enhancing surfaces across commercial, industrial, and specialty applications. We're in search of a Painting Foreman to join our Boise, ID team! We believe in hiring the right people, to make the right decisions, to do the job the right way - ensuring that every project meets the highest standards. We do this while fostering a culture where those that display teamwork, innovation, and excellence thrive. If you're looking to grow with a company and are ready for a challenge, National Coatings is the place for you! Responsibilities and Duties: Extensive Material Knowledge: Proficient in various painting materials and application methods, with a solid grasp of quality control and material management. Goal-Oriented Leadership: Possesses strong organizational and analytical skills, focusing on achieving set goals. Effective Crew Management: Demonstrates ability to lead crews of 5-10 individuals safely and productively; assist in the continuous training and development of field staff. Surface Preparation and Painting: Capable of preparing, priming, sanding, sealing, and painting multiple surfaces using diverse materials such as varnish, lacquer, shellac, enamel, latex, epoxy, waterproofing, and heat-resistant finishes. Equipment Maintenance: Hands-on experience in equipment repair, able to identify and address minor issues promptly. Professional Representation: Maintains a professional demeanor, representing the company positively while on client job sites. Documentation: Completes required reports accurately and promptly, including daily field reports, timecards, field production reports, and time & material reports. Change Orders: Understands the importance of and procedure for completing field change orders and tickets. Equipment Proficiency: Trained and proficient in operating multi-level scaffolding, extension ladders, and spray systems. Maintenance and Safety: Oversees proper usage and maintenance of PPE, tools, assigned trucks, and other equipment ensuring a safe work environment. Experience and Qualifications: 5+ years of experience in commercial painting, including proven supervisory or foreman experience Knowledge of safety regulations and procedures related to painting and construction activities Exceptional communication skills (both verbal and written) with ability to work independently and as part of a team High attention to detail and commitment to quality craftsmanship Ability to read drawings/blueprints is a plus Valid driver's license with a clean driving record Benefits Included: Medical Insurance w/ PPO and HSA Plan Options (Company Pays 95% of HSA Plan for Employee-Only) Dental & Vision Insurance Health Savings Account with Company Match up to $2,000 FSA / Dependent Care Savings Accounts 401(k) Plan with Company Match Life Insurance & Long-Term Disability (Company Paid) Short-Term Disability, Accident, and Voluntary Life Insurance Equal Employment Opportunity National Coatings is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace where all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

At Cortland, we operate with a forward-thinking approach that challenges conventional norms and actively seeks insights beyond traditional industry boundaries. As a recognized leader in the multifamily sector, our focus on performance, innovation, and disciplined execution continues to drive strong growth and market leadership. We are committed to building a best-in-class organization by empowering top talent with the resources, autonomy, and support needed to deliver results and advance their careers in a high-performance environment. Role Overview As a Centralized Painter, you collaborate with the leadership team to meet your daily goals. You also assist with any other painting needs as necessary to always maintain the highest level of quality. The Painting Pro Complete at least one full apartment home paint or two touch-up apartment home paints per day; assist with other painting needs as requested by the Service Manager Complete small drywall repairs and paint prep functions Assist in consistent completion of daily paint shop opening/closing tasks Maintain all company paint equipment to as close to as new condition; follow paint spraying equipment maintenance protocols as written Report any issues or concerns that arise affecting schedule or timely completion of painting tasks The Standard Keeper Ensure that Cortland's standards for the performance of painting-related functions and individual associate presentation are consistently maintained Make sure that the paint shop is consistently well stocked, clean/debris free, and set up and maintained to Cortland's standards Collaborate with the Service Manager and team to develop processes and programs to improve painting team operations and performance Report any support needs or training requests that will enhance the ability to perform the role and complete required duties in a timely manner The Impact You Can Make Your team's projects are completed on time, within budget, at the highest quality, and with a green emphasis. The operational success rate for the projects you support have never been higher, thanks to your close attention to detail and recommendations for improvement. The Service Manager raves about your eye for detail and willingness to help develop more efficient processes. Qualifications Strong 2+ years of experience within interior residential painting; custom home painting is a plus High school diploma or equivalent Working knowledge of spray equipment, elevated safety procedures, and OSHA and MSDS regulations Proficient with roller and brush work along with spraying, including spray prep work; ability to repair paint spray or trade equipment is a plus Capability to complete small drywall repairs to include matching texture; larger project ability is a plus Ability to work on ladders or scaffolding as needed Valid driver's license and vehicle insurance Strong ability to work with minimal supervision Good written and verbal communication skills; English speaking preferred Availability to work all shifts, including weekends as needed Working knowledge of maintenance management software a plus or must be willing to learn Pay: $21-$25/hour based on experience About Cortland Founded in 2005, Cortland is an international, vertically integrated multifamily real estate investment, development, and management firm with a resident-centric approach to living experiences. Recognized as one of the top 10 multifamily owners and operators in the US, Cortland combines in-house design, construction, and operations to deliver value and innovation across its portfolio. Join us as we reimagine apartment living and drive outsized returns through purpose, performance, and people. Cortland is an equal opportunity employer, and we're proud to support and celebrate diversity in the workplace. We are committed to equal consideration for all qualified applicants regardless of race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, genetic information or any other characteristic protected by applicable law. If you have a disability and need an accommodation or assistance with the application process and/or using our website, please email ******************** Cortland is a drug-free workplace. Cortland participates in e-verify to verify the employment status of all persons hired to work in the United States.

****$1,500 SIGN ON BONUS AVAILABLE**** OUR COMPANY: Founded in 2006, Johnson Thermal Systems (JTS) is the largest and leading provider of Power Packaging, Power Distribution Centers and Industrial Refrigeration Units. All equipment is designed and manufactured by our team, in our facility. At JTS, we are proud to have a 'work focused' culture that demands the absolute best of our staff. As a company, we are committed to ongoing training and education to support our staff and ensure, every job we complete is right the first time. Why You Are Needed: This position is responsible for setting up, operating, or tending a paint pot system to paint sheet metal buildings and steel assemblies. Essential Functions/Key Job Responsibilities: Education: High school graduate or GED 3 - 5 years as a painter in a production/metal fabrication facility or similar experience using HVLP gun to paint walls, roofs or ceilings. Set up and operate paint pot system to regulate paint flow by adjusting valves to achieve proper paint flow on product. Prepare unit and/or parts for paint process. Build mil paint thickness without quality defects to meet customer specification. Operate auxiliary tools or equipment used in coating or painting processes such as: power washer, sand blaster, and sander. Determine paint flow, viscosity, and coating quality by using Zahn cup or other viscosity measuring device or tool. Manipulate valves, or switches to regulate air pressure and circulation, and the flow or spray of coatings or paints. Proper labeling and storage of paint and painting products. Timely completion of all in-process documentation. Knowledge of use, maintenance, and clean-up of paint pot system. Ability to read, understand and interpret work orders, shop orders, quality plans, blue prints, and work instructions to complete tasks. Mathematical skills such as adding, subtracting, multiplying, dividing, fractions, and ratios. Ability to use viscosity measuring device and mil gauge. Ability to effectively interact and communicate with individuals at all organizational levels. Ability to conduct self in a respectful and appropriate manner. Ability to safely perform tasks and produce a quality product in an efficient and productive manner to meet schedule. Ability to reason and apply principles of logic to a wide range of factors when monitoring and working on jobs. Being reliable, responsible and dependable Being careful about detail and thorough in completing work tasks. Ability to work independently without constant supervision. Ability to work in a heavy manufacturing environment requiring awkward stances and positions such as bending, stooping, crouching, twisting, and reaching for periods of time throughout an 8 to 10 hour day. Ability to stand and walk for majority of 8 to 10 hour day, bend, lift and carry paint gun and pull paint hose. Pick up and carry paint containers up to 40 pounds frequently. Ability to work from ladders and scaffolding up to 20 feet high Ability to work on a roof with a ½ inch slope per foot Work Environment: Industrial manufacturing facility. What You Will Receive in Return: Competitive Salary 120 hours of PTO 9 Paid Holidays Health/Dental/Vision Insurance Corporate Health Club Membership 401k

For over two decades Interstate has been an industry leader in the manufacturing and sales of cargo trailers. Established in 1995, our goal is to build quality trailers that meet our customers' personal and commercial needs. Whether it's hauling a vehicle for play (car, atv, snowmobile, motorcycle, etc), or transporting heavy duty equipment or material between sites, Interstate has the right trailer for the job and we need you to help deliver the demand on our Production Team as amember of the Wire, Prep and Paint Department. The Wire, Prep and Paint staff will support our valued customers and their store by contributing to the high quality construction process of Interstate Trailers. This will include: Receiving trailer frame from Weld shop and reviewing the accompanying build order. Accurately wiring trailer frames according to the build order for any electrical options the standard or custom build order specifies. Using an oxygen and acetylene torch and other general hand tools to create passageways for the internal wiring. Use a grinder to knock down weld imperfections. Clean and wipe surfaces to remove oil or debris and ready for painting. Paint and cover visible areas of the trailer using appropriate spraying tools within a paint booth or designated area. Using appropriate tools, attaching all necessary components according to the build order (e.g., tail lights, connectors, break away battery box.) After training, this role will demonstrate a consistently safe, efficient and accurate work environment. All finished work production will consistently meet high quality control standards. This role is expected to learn and become proficient in other production roles in order to support the entire production team as needed. This position will work independently with the following tools: Oxygen and Acetylene torch 4" Grinders General Hand Tools Electrostatic or other painting tools and systems Why you'll love working for Interstate / TrailersPlus: A dynamic team environment with a 4 day work schedule that allows you more personal time. Generous Wage: Capable welders in Nampa can over $19 per hour with our group rate incentives. Paid training with internal growth opportunities. You will also share in our success with a generous bonus of 2% yearly earnings Great benefits: medical, dental and 401K. 2 weeks off during the Christmas Holidays! Employee discounts on TrailersPlus merchandise. The ideal candidate: Enthusiastic - Motivated to show up, work hard and get it done right. Professional attitude and appearance. Uncompromising attention to consistent and exceptional results. Some welding experience preferred, will train for our process. Mechanical ability- working with power tools and yard vehicles. Team mindset - Will seek to help out, learn and improve wherever needed to help the business. Has an interest in promoting within our organization. We are a growing Company and we believe in growing our employees. We partner with our employees through training, coaching, promotion or other opportunities to assure their full potential and success. If you are hard working, committed to doing it right and always getting better, this could be the start of a very successful career.

Job Description At National Coatings, integrity, experience, and quality are the heart of everything we do. These values guide us in delivering high-performance coating solutions that are innovative, durable, and built to last. With decades of expertise, we take pride in protecting and enhancing surfaces across commercial, industrial, and specialty applications. We believe in hiring the right people, to make the right decisions, to do the job the right way - ensuring that every project meets the highest standards. We do this while fostering a culture where those that display teamwork, innovation, and excellence thrive. If you're looking to grow with a company and are ready for a challenge, National Coatings is the place for you! Responsibilities and Duties: Extensive Material Knowledge: Proficient in various painting materials and application methods, with a solid grasp of quality control and material management. Goal-Oriented Leadership: Possesses strong organizational and analytical skills, focusing on achieving set goals. Effective Crew Management: Demonstrates ability to lead crews of 5-10 individuals safely and productively; assist in the continuous training and development of field staff. Surface Preparation and Painting: Capable of preparing, priming, sanding, sealing, and painting multiple surfaces using diverse materials such as varnish, lacquer, shellac, enamel, latex, epoxy, waterproofing, and heat-resistant finishes. Equipment Maintenance: Hands-on experience in equipment repair, able to identify and address minor issues promptly. Professional Representation: Maintains a professional demeanor, representing the company positively while on client job sites. Documentation: Completes required reports accurately and promptly, including daily field reports, timecards, field production reports, and time & material reports. Change Orders: Understands the importance of and procedure for completing field change orders and tickets. Equipment Proficiency: Trained and proficient in operating multi-level scaffolding, extension ladders, and spray systems. Maintenance and Safety: Oversees proper usage and maintenance of PPE, tools, assigned trucks, and other equipment ensuring a safe work environment. Experience and Qualifications: 5+ years of experience in commercial painting, including proven supervisory or foreman experience Knowledge of safety regulations and procedures related to painting and construction activities Exceptional communication skills (both verbal and written) with ability to work independently and as part of a team High attention to detail and commitment to quality craftsmanship Ability to read drawings/blueprints is a plus Valid driver's license with a clean driving record Benefits Included: Medical Insurance w/ PPO and HSA Plan Options (Company Pays 95% of HSA Plan for Employee-Only) Dental & Vision Insurance Health Savings Account with Company Match up to $2,000 FSA / Dependent Care Savings Accounts 401(k) Plan with Company Match Life Insurance & Long-Term Disability (Company Paid) Short-Term Disability, Accident, and Voluntary Life Insurance Equal Employment Opportunity National Coatings is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace where all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

This is an exciting opportunity to join a dynamic team at ATC Manufacturing as a Full-Time Aerospace Painter. Get ready to apply your expertise in painting aerospace parts while working in a fast-paced manufacturing environment. Your HVLP experience will be put to good use as you prep and paint parts to meet our high-quality standards. This onsite position in Post Falls, ID offers competitive pay ranging from $21 to $27 per hour. ATC Manufacturing values professionalism, quality, and innovation, making this role perfect for a skilled painter looking to make an impact in the aerospace industry. You will be given great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Paid Time Off, Employee Discounts, ATC pays 80% of the cost of Medical, and Dental and 100% Vision for you and your family. ATC Manufacturing: What drives us At ACT Manufacturing, our mission is to Advance lightweight thermoplastic composites through a passionate, empowered team, to benefit our customers, stakeholders and community. We value Safety, Quality, Integrity, Innovation and Professionalism. we're renowned for our precision engineering and manufacturing excellence. With a legacy of innovation and a commitment to quality, we lead the industry in delivering top-tier products and service. Join us and be part of a dynamic team shaping the future of manufacturing. Your role as a Aerospace Painter As an Aerospace Painter at ATC Manufacturing, you will play a crucial role in preparing parts for painting, priming them, and applying paint according to strict aerospace requirements. Your attention to detail and expertise in painting will ensure that our products meet the highest quality standards. Join our team in Post Falls, ID, where innovation and professionalism drive our commitment to excellence in manufacturing. Does this sound like you? To excel in the role of Aerospace Painter at ATC Manufacturing, you must possess strong skills in using tools like HVLP spray guns. Experience in prepping parts for painting, applying primers, and following aerospace painting requirements is essential. Attention to detail and adherence to quality standards are key for success in this position. With a focus on safety and professionalism, your ability to work efficiently and accurately in a manufacturing setting will be highly valued. Knowledge and skills required for the position are: HLVP experience 2 years painting Get started with our team! If you think this job aligns with your requirements, then submitting an application is simple. Good luck! Compliance with US Export Control Regulations: This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR). In order to comply with these regulations, applicants for employment must be a "U.S. Person" as defined by the ITAR and/or EAR. The definition of "US Person" includes U.S. citizen or national, U.S. permanent resident, or lawfully admitted into the U.S. as a refugee or granted asylum. As an EOE/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status As a condition of employment, all applicants are subject to a comprehensive background check. This may include verifying employment history, educational qualifications, professional licenses, and conducting criminal record checks. By submitting your application, you acknowledge and authorize ATC to conduct such background checks to evaluate your suitability for employment. Any information provided during the background check process will be treated confidentially and in accordance with applicable laws and regulations. At ATC, we maintain a strict drug-free workplace policy. All job applicants are required to undergo drug screening as part of the pre-employment process. The drug screening may involve testing for the presence of illegal substances and controlled substances, including but not limited to marijuana, cocaine, opioids, amphetamines, and benzodiazepines. By submitting your application, you consent to undergo a drug screening as deemed necessary by ATC.

To meet the demands of our rapidly growing base of satisfied customers, Handyman Connection of Boise, ID is seeking an experienced painter. This skilled craftsman would ideally have a variety of home improvement skills to support the growth of our business. Handyman Connection is a locally owned and operated, well established Home Improvement Company dedicated to excellent customer service and quality work. Our customers love us! We have over 50% repeat/referral customer base and our business is growing! What You Will Receive Earn $30-45/hour or up to $1,200/week, depending on your skills and availability Professional Office Support - scheduling, customer support, job tracking Free access to custom mobile application for scheduling and communications Successful marketing campaign that brings us well qualified customers Branded apparel and signage Responsibilities The Painter performs and coordinates the preparation and application of exterior and interior finishes in a residential and light commercial setting. You must have experience as a residential painter, and you must have a positive attitude. Prepares various surfaces for painting by washing, scraping, burning, sanding, sandblasting or other means as necessary. Mixes, matches, and blends various paints, enamels, lacquers, varnishes, stains and special protective coatings to achieve desired color, consistency, and drying properties. Caulks, putties, cements or plasters holes and cracks. Paints using brush, roller, spray gun or other applicator. Prepares wall and hangs paper or other wall covering material. Ability to determine and clearly identify proper materials and material quantities for new and existing projects. Evaluate customer requests, price projects, troubleshoot customer issues, and present a description of a work order to a customer. Requirements Must have current Driver's License and Insurance Must have tools, work vehicle and good references Must have experience in the remodeling or home repair trades Independent Contractors must carry liability insurance and workers comp Must pass screening process which includes a background check Must have a smart phone and access to the internet Please, no Project Managers or those that specialize primarily in New Construction. Ready to Learn More? Please complete the short application, and we will contact you for a quick conversation to see if this could be the right match for you. Check us out on the web at: ************************** What our customers say:. Watch More Why Handyman Connection? #ZR Compensation: $500.00 - $1,300.00 per week Your locally owned Handyman Connection franchise contracts with talented craftsmen like you to deliver quality workmanship and professional service for our customers. We service the entire Treasure Valley area including: Boise, Meridian, Garden City, Eagle, Nampa, Caldwell, Star, Letha and the surrounding communities. If you're interested in: High earnings potential A flexible schedule that you control Using your skills to help improve other's lives Handyman Connection might be a great fit for you. Homeowners across North America have been calling on Handyman Connection for our professional craftsmanship and great customer experience since 1991 (and we've been in Boise since 2003!). Each Handyman Connection franchise is locally owned and operated, backed by the company that helped launch the industry.

Painter/Prep Worker We are looking for some honest hard working people to join our team. Painter experience is a benefit but no experience is needed either. We will train on the prep work and techniques that we use. Must have a valid drivers license, reliable transportation and willingness to learn to work. Pocatello & Rexburg Idaho positions available. Part-time & Full-time available. We will try to work with school schedules. Pay is discussed in interview. Compensation: $9.50 DOE “We Build Careers” - Steve White, President and COO With over 300 locations across North America and Canada, PuroClean is leading the industry in emergency property restoration services, by helping families and businesses overcome the devastating setbacks caused by water, fire, mold, biohazard, and other conditions resulting in property damage. We operate with a ‘servant-based leadership' mindset and seek to create an environment where our team members can grow both professionally and spiritually through serving our customers, communities, and each other. Culture is very important to us. We want to make sure that we are the right fit for YOU! Apply today and join our Winning TEAM. “We are One Team, All In, Following The PuroClean Way in the spirit of Servant Leadership” This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to PuroClean Corporate.

Painter I This position maintains and improves facilities throughout campus by preparing and painting interior and exterior building components, furniture and floors. This is an essential position that will be called upon in the event of an emergency and/or university closure. Duties may include: * Patch, clean and prepare all wall surface types * Prepare work site to protect surrounding surfaces * Mud and tape sheetrock in new construction, repairs and renovations * Match, mix, blend and apply paint and stain to a variety of surfaces * Clean work site and remove debris, properly disposing of chemicals * Remove broken glass and determine correct replacement glass based on building safety codes * Remove and repair window screens and aluminum, wood and vinyl window frames * Install replacement glass and specialty glass * Order and maintain a varied glass inventory * Other duties as assigned Painter II This position maintains and improves facilities throughout campus by independently performing journeyman-level preparation and painting of interior and exterior building components, furniture and floors. This is an essential position that will be called upon in the event of an emergency and/or university closure. Duties may include: * Patch, clean and prepare all wall surface types * Determine appropriate application method for surfaces to be covered * Match, mix, blend and apply paint and stain to a variety of surfaces * Remove broken glass and determine correct replacement glass based on building safety codes * Remove and repair window screens and aluminum, wood and vinyl window frames * Install replacement glass and specialty glass * Order and maintain a varied glass inventory * Meet with customers to define job to be completed; determine the effect the work will have on building users and discuss strategies to avoid disruption * Other duties as assigned

Job Description This is an exciting opportunity to join a dynamic team at ATC Manufacturing as a Full-Time Aerospace Painter. Get ready to apply your expertise in painting aerospace parts while working in a fast-paced manufacturing environment. Your HVLP experience will be put to good use as you prep and paint parts to meet our high-quality standards. This onsite position in Post Falls, ID offers competitive pay ranging from $21 to $27 per hour. ATC Manufacturing values professionalism, quality, and innovation, making this role perfect for a skilled painter looking to make an impact in the aerospace industry. You will be given great benefits such as Medical, Dental, Vision, 401(k), Life Insurance, Paid Time Off, Employee Discounts, ATC pays 80% of the cost of Medical, and Dental and 100% Vision for you and your family. ATC Manufacturing: What drives us At ACT Manufacturing, our mission is to Advance lightweight thermoplastic composites through a passionate, empowered team, to benefit our customers, stakeholders and community. We value Safety, Quality, Integrity, Innovation and Professionalism. we're renowned for our precision engineering and manufacturing excellence. With a legacy of innovation and a commitment to quality, we lead the industry in delivering top-tier products and service. Join us and be part of a dynamic team shaping the future of manufacturing. Your role as a Aerospace Painter As an Aerospace Painter at ATC Manufacturing, you will play a crucial role in preparing parts for painting, priming them, and applying paint according to strict aerospace requirements. Your attention to detail and expertise in painting will ensure that our products meet the highest quality standards. Join our team in Post Falls, ID, where innovation and professionalism drive our commitment to excellence in manufacturing. Does this sound like you? To excel in the role of Aerospace Painter at ATC Manufacturing, you must possess strong skills in using tools like HVLP spray guns. Experience in prepping parts for painting, applying primers, and following aerospace painting requirements is essential. Attention to detail and adherence to quality standards are key for success in this position. With a focus on safety and professionalism, your ability to work efficiently and accurately in a manufacturing setting will be highly valued. Knowledge and skills required for the position are: HLVP experience 2 years painting Get started with our team! If you think this job aligns with your requirements, then submitting an application is simple. Good luck! Compliance with US Export Control Regulations: This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR). In order to comply with these regulations, applicants for employment must be a "U.S. Person" as defined by the ITAR and/or EAR. The definition of "US Person" includes U.S. citizen or national, U.S. permanent resident, or lawfully admitted into the U.S. as a refugee or granted asylum. As an EOE/Affirmative Action Employer all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status As a condition of employment, all applicants are subject to a comprehensive background check. This may include verifying employment history, educational qualifications, professional licenses, and conducting criminal record checks. By submitting your application, you acknowledge and authorize ATC to conduct such background checks to evaluate your suitability for employment. Any information provided during the background check process will be treated confidentially and in accordance with applicable laws and regulations. At ATC, we maintain a strict drug-free workplace policy. All job applicants are required to undergo drug screening as part of the pre-employment process. The drug screening may involve testing for the presence of illegal substances and controlled substances, including but not limited to marijuana, cocaine, opioids, amphetamines, and benzodiazepines. By submitting your application, you consent to undergo a drug screening as deemed necessary by ATC. Job Posted by ApplicantPro

Job Description At National Coatings, integrity, experience, and quality are the heart of everything we do. These values guide us in delivering high-performance coating solutions that are innovative, durable, and built to last. With decades of expertise, we take pride in protecting and enhancing surfaces across commercial, industrial, and specialty applications. We believe in hiring the right people, to make the right decisions, to do the job the right way - ensuring that every project meets the highest standards. We do this while fostering a culture where those that display teamwork, innovation, and excellence thrive. If you're looking to grow with a company and are ready for a challenge, National Coatings is the place for you! Responsibilities and Duties: Surface Preparation: Prepare surfaces by priming, sanding, sealing, and patching, utilizing a variety of painting materials including varnish, lacquer, shellac, enamel, latex, epoxy, waterproofing, and heat-resistant finishes. Color Matching: Cross-check colors and confirm supplied products to match job files. Application Skills: Apply materials to new construction, existing, and remodeled buildings with precision and expertise. Professional Representation: Exhibit a professional demeanor and effectively represent the company while working at client job sites. Blueprint Interpretation: Understand and interpret blueprints and scope specifications to ensure accurate execution of painting tasks. Documentation: Complete required reports accurately and in a timely manner. Change Orders: Understand the importance of and proficiently complete field change orders and submittals. Equipment Proficiency: Trained and capable with multi-level scaffolding, extension ladders, and spray systems. Maintenance: Maintain tools, equipment, and assigned trucks, ensuring they are in optimal condition; always keep a clean and safe work area. Extensive Knowledge: Possess and apply in-depth knowledge of various painting materials and application methods. Experience and Qualifications: 3+ years of experience as a commercial painter - experience in both exterior and interior commercial painting, wallcoverings, and coatings highly preferred Exceptional attention to detail and quality craftsmanship Excellent communication and interpersonal skills with ability to work independently and as part of a team Commitment to safety protocols and procedures Valid driver's license and reliable transportation Benefits Included: Medical Insurance w/ PPO and HSA Plan Options (Company Pays 95% of HSA Plan for Employee-Only) Dental & Vision Insurance Health Savings Account with Company Match up to $2,000 FSA / Dependent Care Savings Accounts 401(k) Plan with Company Match Life Insurance & Long-Term Disability (Company Paid) Short-Term Disability, Accident, and Voluntary Life Insurance Equal Employment Opportunity National Coatings is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace where all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.