Painter jobs in Jacksonville, FL

**Are you seeking a job with benefits and longevity? BAE Systems Jacksonville Ship Repair Division maybe the answer to your job search. We presently have openings for Painters.** To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the knowledge, skill, and/or ability desired. The individual must have working knowledge of procedures, strong mechanical aptitude and ability, and be able to follow directions. The individual must have a thorough knowledge of equipment used in surface preparation and coating application operations. The individual must demonstrate ability to interpret job specifications, instruction manuals, and manufacturer s handbooks. The individual must have thorough knowledge of the application and operation of equipment used in surface preparation and coating operations at BAE Systems. Must be able to follow directions and work with limited supervision. Must be willing to work with and train subordinates. **SAFETY/ENVIRONMENTAL** Must comply with Company safety rules and OSHA standards. Must be physically and medically qualified to wear required personal protective equipment as prescribed under OSHA standards. Must handle hazardous materials/waste in compliance with local, state and federal regulations and in accordance with procedures. **ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES** include the following. Other duties may be assigned. SURFACE PREPARATION HIGH PRESSURE WASHING - Can make-up and set-up high pressure wash equipment, hoses and lines. - Can run high pressure wash equipment. - Can high pressure wash blast at better than a 400 sq-ft per hour rate. SOLVENT CLEANING (DEGREASING) - Can set-up solvent cleaning equipment. - Can solvent clean at a 250 sq-ft per hour rate. DRY GRIT BLAST CLEANING - Can make-up and set-up blast equipment, hoses and lines. - Can run blast equipment. - Can dry grit blast clean at better than a 100 sq-ft per hour rate. - Ability to sandblast and paint in confined spaces. WET GRIT BLAST CLEANING - Can make-up and set-up blast equipment, hoses and lines. - Can run blast equipment. - Can dry grit blast clean at better than a 90 sq-ft per hour rate. UHP WATER JET CLEANING - Can make-up and set-up UHP Water Jet equipment, hoses and lines. - Can run UHP Water Jet equipment. - Can UHP Water Jet clean at better than a 70 sq-ft per hour rate. UHP GRIT INJECTED WATER JET CLEANING - Can make-up and set-up UHP Water Jet abrasive injection equipment, hoses and lines. - Can run UHP Water Jet with abrasive injection equipment. - Can UHP Water Jet clean with abrasive injection at better than an 80 sq-ft per hour rate. PAINTING - Can set-up paint pumps, hoses and lines. - Can mix and thin all types of coatings as instructed in written specification or work package. - Proficient at spraying with conventional and airless spray guns. - Environmentals - Coating Report - Comply with NESHAP requirements. - Complies with proper storage and precautions for paints and solvents. - Ability to check mil thickness and record data in work package. - Complies with proper disposal of empty paint and solvent cans. - Can clean and maintain all surface preparation and coating equipment. - Can troubleshoot and repair malfunctioning surface preparation and coating equipment. - Can cleanup and prepare surface preparation and coating equipment for stowage. - Can clean tanks and machinery spaces to gas-free specifications. **SUMMARY** To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the knowledge, skill, and/or ability desired. The individual must have working knowledge of procedures, strong mechanical aptitude and ability, and be able to follow directions. The individual must have a thorough knowledge of equipment used in surface preparation and coating application operations. The individual must demonstrate ability to interpret job specifications, instruction manuals, and manufacturer s handbooks. The individual must have thorough knowledge of the application and operation of equipment used in surface preparation and coating operations at BAE Systems. Must be able to follow directions and work with limited supervision. Must be willing to work with and train subordinates. **SAFETY/ENVIRONMENTAL** Must comply with Company safety rules and OSHA standards. Must be physically and medically qualified to wear required personal protective equipment as prescribed under OSHA standards. Must handle hazardous materials/waste in compliance with local, state and federal regulations and in accordance with procedures. **ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES** include the following. Other duties may be assigned. SURFACE PREPARATION HIGH PRESSURE WASHING - Can make-up and set-up high pressure wash equipment, hoses and lines. - Can run high pressure wash equipment. - Can high pressure wash blast at better than a 400 sq-ft per hour rate. SOLVENT CLEANING (DEGREASING) - Can set-up solvent cleaning equipment. - Can solvent clean at a 250 sq-ft per hour rate. DRY GRIT BLAST CLEANING - Can make-up and set-up blast equipment, hoses and lines. - Can run blast equipment. - Can dry grit blast clean at better than a 100 sq-ft per hour rate. - Ability to sandblast and paint in confined spaces. WET GRIT BLAST CLEANING - Can make-up and set-up blast equipment, hoses and lines. - Can run blast equipment. - Can dry grit blast clean at better than a 90 sq-ft per hour rate. UHP WATER JET CLEANING - Can make-up and set-up UHP Water Jet equipment, hoses and lines. - Can run UHP Water Jet equipment. - Can UHP Water Jet clean at better than a 70 sq-ft per hour rate. UHP GRIT INJECTED WATER JET CLEANING - Can make-up and set-up UHP Water Jet abrasive injection equipment, hoses and lines. - Can run UHP Water Jet with abrasive injection equipment. - Can UHP Water Jet clean with abrasive injection at better than an 80 sq-ft per hour rate. PAINTING - Can set-up paint pumps, hoses and lines. - Can mix and thin all types of coatings as instructed in written specification or work package. - Proficient at spraying with conventional and airless spray guns. - Environmentals - Coating Report - Comply with NESHAP requirements. - Complies with proper storage and precautions for paints and solvents. - Ability to check mil thickness and record data in work package. - Complies with proper disposal of empty paint and solvent cans. - Can clean and maintain all surface preparation and coating equipment. - Can troubleshoot and repair malfunctioning surface preparation and coating equipment. - Can cleanup and prepare surface preparation and coating equipment for stowage. - Can clean tanks and machinery spaces to gas-free specifications. **Required Education, Experience, & Skills** Marine preservation certifications, i.e. SSPC C7, C12, C13, C14, CAS Level 2 Must be able to obtain and maintain Defense Biometrics Identification "DBIDS" Access card. **Preferred Education, Experience, & Skills** Marine Maritime Preservation Experience desired . **Pay Information** Full-Time Salary Range: $39749 - $66165 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20 hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. **Marine Painter** **118499BR** EEO Career Site Equal Opportunity Employer. Minorities . females . veterans . individuals with disabilities . sexual orientation . gender identity . gender expression

Residential Painter The Painting Craftsmen 2180 Emerson Street, Jacksonville, FL, 32207 USA Salary: $18-$25 per hour Job Type: Full-Time Working for the BEST has never been better! Jacksonville's best residential painting company is hiring and we have an immediate opening for a top-notch lead residential painter in our house painting division! Earn $18-$21 per hour to train as a house painter and then $22-$25 per hour as a lead residential painter. WHO WE ARE: The Painting Craftsmen is an energetic and fast-growing company that provides high end custom house painting services, including interior painting, exterior painting, cabinet refinishing, and much more. We provide high quality work and attention to detail at every job, every time, and our customers love us! We're growing rapidly, and we need great house painting technicians who take pride in a job well done. We're known for being the best painting contractors in Jacksonville, but that doesn't mean you need previous painting experience to apply. As long as you have a positive attitude and enjoy working on a team of great people, we have everything you need to gain the skills you need and succeed! It's easy to apply, and it's the perfect time to join our pro house painting team! WHAT WE OFFER: We have everything you need to succeed at your job and love what you do! Daytime hours M-F (no nights or weekends) 2 weeks of paid time off and 7 paid holidays! Competitive pay PLUS bonuses for painters Excellent benefits package, including health insurance (at least 50% paid by company), dental, vision, and disability All vehicles, tools, and painting supplies provided! On-site industrial spray booth - Our expert cabinet refinishing takes place in our custom designed spray booth! Stable, safety forward, professional painting company to grow with! Paid training - our in-house training program provides the skills you need to become an expert house painter (no previous experience needed!) Professional development assistance and mentorship Great managers who want you to succeed! Company-paid cell phone service for lead painters 401(k) with match available Advancement opportunities …and more! In a September 2022 company survey, 94% of current employees said they were likely to recommend working here! WHAT WE NEED: If this is you, we need you! Positive attitude Trainable Take pride in a job well done Able to lift and/or carry more than 50 lbs. Able to responsibly work on sloped roofs occasionally while using appropriate fall protection systems Able to responsibly utilize ladders with a manufacturer's rated capacity of 250 lbs. Able to responsibly handle cleaning solutions, cleaning agents, chemicals, and gases, and wear safety goggles, gloves, and/or dust masks when necessitated by prep or cleaning tasks Able to operate machinery safely and according to manufacturer's instructions Able to stand for extended periods of time, push, pull, bend, reach, and make repetitive motions Able to read, write, speak, and hear Driver's license and record of safe driving Clean background (we perform background checks and drug testing for all employees) Wish list: Do you like painting? Have you worked as a painting contractor? Do you have previous experience with interior painting, exterior painting, cabinet refinishing, or other experience in a related field? Do you pay attention to detail and take pride in your work? Do you have a diploma or GED? We really want to meet you! IDEAL APPLICANT: So who is our ideal residential painting candidate? If you have a positive attitude, a clean background, like to learn, and like working with your hands, then we have everything else you need to love your job on our house painting team and EXCEL at it! Our company is filled with energetic, positive team members who love what they do, take pride in their work (small jobs and large jobs alike), and come from all over. Some of our team members have been painters for years, and some come to us with absolutely no experience, ready to learn the ropes! Some are just out of high school, some are parents, some are military, some are from Jacksonville, and some are not! Some of us are new to the team and some have been here since the beginning! Together, we're a dynamic team providing truly OUTSTANDING residential painting services and making our customers happy every day. Come join us!

**Req ID:** RQ207231 **Type of Requisition:** Regular **Clearance Level Must Be Able to Obtain:** Secret **Public Trust/Other Required:** None **Job Family:** Field Service and Support **Skills:** Paint Coatings,Painting,Surface Preparation **Experience:** 2 + years of related experience **US Citizenship Required:** Yes **Job Description:** Marine Painter (US Navy Submarine) **Onsite Locations:** Portsmouth Naval Shipyard Kittery, Maine Pearl Harbor Naval Shipyard Pearl Harbor, Hawaii Kings Bay Naval Shipyard Kings Bay, Georgia Norfolk Naval Shipyard Portsmouth, Virginia Bremerton Naval Shipyard Bremerton, Washington Make meaningful contributions that fuel critical outcomes for some of the most complex government, defense, and intelligence projects. Join GDIT as a Marine Painter (US Navy Submarine) for a career where your growth is just as important as the mission you support. The SUB AIT program supports the In-Service Attack Submarines Program Office (PMS 392) under Program Executive Office Attack Submarines (PEO SSN) to achieve optimal submarine operational readiness by providing /production support, component repairs and technical support to accomplish repair, maintenance, removal/installation, troubleshooting and associated testing for Chief of Naval Operations (CNO) submarine maintenance availabilities. The efforts associated with this program will help restore and maintain the material condition and modernization of the fast attack submarines of the United State Navy. **Requirements** + 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned. + HS/GED + Must be US Citizen. + Confidential Security Clearance or higher level required. Personnel shall have at least 2+ years' experience performing repair work on nuclear submarines within the trade they are being assigned. Personnel shall have DOW type "final" security clearance (DISCO authority with a minimum of a confidential clearance status). At a minimum, all personnel shall be United States citizens and shall possess a final favorable adjudicated tier 3 investigation. Contractor personnel must have a Department of War Personnel Security Clearance (PCL) at the confidential level or higher. Marine Painter Tasks Remove and apply paint coatings on submarines and submarine components. Prepare and paint/preserve surfaces of submarine's interior and exterior tanks. Use both power and hand tools in preparing submarine component and foundation surfaces for preservation. Needle gun, prepare and preserve interior bilges and waterways. Groom and final paint-out submarine compartments. Perform cover-up to protect all equipment and surfaces from dust, paint and damage utilizing the proper protection methods and materials prior to performing cleaning and painting operations. Marine Painter Skill Requirements At least two (2) years of experience in the painting trade in heavy industry or on marine vessels, to include experience performing surface preparation for painting. Trained and qualified to wear respiratory protection devices IAW 29 CFR 1910.134 (Subpart I). Trained and qualified to work with lead, cadmium, and arsenic as well as mixed solvents. Perform work in compliance with environmental requirements to acquire, apply, remove and dispose of paint, paint waste or residuals and lead paint waste in accordance with OSHA requirements, Federal and State laws as well as Naval Shipyard procedures. Proficient at applying paint that is free of paint discontinuities, i.e., skips, runs, drips and holidays. Proficient at the removal and application of paint coatings, prepare and paint and/or preserve surfaces of interior and exterior tanks, bulkheads, voids, bilges, passageways, machinery/propulsion spaces on naval vessels and components. Proficient with the use of both power and hand tools i.e., needle gun, sanders, etc., to prepare components and foundation surfaces for final painting or preservation as required. Proficient with performing cover-up to protect all equipment and surfaces from dust, paint and damage utilizing the proper protection methods and materials prior to performing cleaning and painting operations. Proficient at preparing coating materials by toning, matching, blending, and mixing in various additives such as catalysts, drying agents, and retardants for tanks, with the proper application of brushes or rollers, for the paint millage required by written technical direction. Appropriate medical stressors to allow working with "black diamond" compounds. As a minimum, this will include 29 CFR 1910 medical exams for 121 Beryllium, 124 Cadmium, 133 Chromic acid/Chromium and 161 Lead. Certified in accordance with SSPC C-6 and SSPC C-12 or NAVSEA approved equivalent (contractor must specify and provide). Qualified in surface preparation and application of coatings of critically coated areas per NSTM S9086-VD-STM-030/Ch-631 V3R1-Preservation of Ships in Service. Painters shall also be familiar with the requirements for standards in SSPC-1, 5, 10, and 11. Marine Painter Technical Standards NSTM S9086-VD-STM-010/Ch-631 Rev 3 - Preservation of Ships in Service 29 CFR 1910.134 (Subpart I) - Respiratory Protection The Society for Protective Coatings (SSPC) standards NAVSEA Standard Item 009-32 OSHA requirements Naval Shipyard IPI 9863-455 Required Marine Painter Skill Training Preparations for Painting Paint/Blast Hazards Cleaning Equipment Shipboard Selecting and Wearing Respirators **GDIT IS YOUR PLACE** At GDIT, the mission is our purpose, and our people are at the center of everything we do. ● Growth: AI-powered career tool that identifies career steps and learning opportunities ● Support: An internal mobility team focused on helping you achieve your career goals ● Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay and paid time off ● Community: Award-winning culture of innovation and a military-friendly workplace **OWN YOUR OPPORTUNITY** Explore a career at GDIT and you'll find endless opportunities to grow alongside colleagues who share your ambition to deliver your best work. **\#SubAIT** **\#hireshipyardcareersgdit** The likely hourly rate for this position is between $39.56 - $53.52. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. GDIT typically provides new employees with 15 days of paid leave per calendar year to be used for vacations, personal business, and illness and an additional 10 paid holidays per year. Paid leave and paid holidays are prorated based on the employee's date of hire. The GDIT Paid Family Leave program provides a total of up to 160 hours of paid leave in a rolling 12 month period for eligible employees. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most. We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. Join our Talent Community to stay up to date on our career opportunities and events at ******************** Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Our company is growing and we pride ourselves in working with quality painting crews! If you are a painting subcontractor interested in working with our dynamic team, please fill out the application. The ideal candidates are painting professionals with the highest standards with experience in either commercial or residential re-painting. They must be physically able to perform the duties of the job, which includes performing repetitive movements, standing for long periods, lifting heavy objects, climbing stairs and ladders, etc. We aim to keep our subcontractors busy and develop a lasting business relationship! RESPONSIBILITIES Understands and executes work orders in a timely and professional manner Maintains clean, organized work areas and securely stores equipment and supplies Inspects work for the highest quality Maintains strict attention to detail when working at customer's property Follows all safety policies and procedures Ensures that required documentation is complete and is in compliance with regulations and standards QUALIFICATIONS Painting skills and knowledge of painting tools and equipment Strong communication and interpersonal skills Exceptional customer service skills Highly organized and self-motivated Quality conscious and detail-oriented Unrestricted driver's license and clean driving record Liability insurance required; worker's comp strongly preferred Must be willing to undergo and pass a criminal background check Behind every excellent paint job, are the people who get to know the homeowner, help craft the design, improve the look and feel and even keep the project moving along. At Five Star Painting , we're looking for more people who can do that. With flexible hours, it doesn't matter if you're the stay-at-home type, or the 80-hour workweek type, there's a place for you in an independently owned and operated Five Star Painting franchise. Apply today. Notice Five Star Painting LLC is the franchisor of the Five Star Painting franchised system. Each Five Star Painting franchised location is independently-owned and operated by an independent franchisee performing services. As a service to its independent franchisees, Five Star Painting LLC lists employment opportunities available throughout the franchised network so those employment opportunities may be conveniently found by interested parties at one central location for brand management purposes only. Five Star Painting LLC is NOT the employer seeking help. The only employer is the independent franchisee who has listed its available positions on this website. *Acknowledgement I acknowledge that each independent Five Star Painting franchisee hires and determines the terms and conditions of employment for its own employees. Any employment benefits, compensation and employment practices vary by location. Neither Five Star Painting LLC (“Franchisor”) nor its affiliates have the power to: (1) hire, fire or modify the employment condition of franchisee's employees; (2) supervise and control franchisee's employee work schedule or conditions of employment; (3) determine the rate and method of payment; or (4) accept, review or maintain franchisee employment records. Five Star Painting LLC is NOT the employer and/or joint employer for: (i) any of the job opportunities listed on this website; (ii) any of the independent franchisees; and, (iii) any of the employees of the independent franchisees.

Job DescriptionBenefits: Bonus based on performance Company car Company parties Free uniforms Opportunity for advancement Training & development Do you have a knack for fixing things with your hands? Thrive doing something different every day? You might be the perfect Surface Experts Technician! Complete small repairs daily by applying your creativity and using problem-solving skills. A Day in the Life of a Surface Experts Technician: ******************************************* WE OFFER: Base Salary + Bonus Opportunity: Performance-based commissions starting on day 1 Great Work/Life Balance: No required overtime, no nights, no weekends Time Off: Paid holidays and accruable vacation Flexible Work Schedule: Can accommodate midweek appointments Paid New Hire Training: Onboarding includes learning alongside a trained technician Company Car: Each technician drives a branded company vehicle for job duties Tools Included: All necessary tools and products are provided Learn a New Trade: Develop skills in a brand-new emerging trade Supportive Work Environment: Team celebrates achievements and collaborates in their approach to problem-solving Small Business: Local business with an owner who works alongside the team each day Mentorship Opportunities: Ongoing repair training and career development Dedicated Help Lines: Technician Support Team on call to assist to questions DUTIES: In the Field Daily Visit 4+ jobsites every day Repair damage on the job site while using exceptional customer service to follow up with staff Employ your creativity in several settings such as apartments, hotels, commercial buildings, and building sites Customer Service and Communication Use outstanding customer service to engage with staff and tenants Keep progress up to date with notes and updates in our CRM/Dispatch tool Reach out to our Support Team on any issue or question Follow Repair Process Develop an understanding of our own 5-step repair process and use it in the field Master each part of your custom-made tool-kit Think outside the box to create one-of-a-kind repairs We are in search of someone with experience in painting. This could be interior or exterior painting, or even painting in a visual art sense. Your knowledge of color and paint application will assist in the color matching portion of the repair process. QUALIFICATIONS Practical experience with a hands-on trade Example include any part the construction, manufacturing, or painting process. Personal hobbies could work too! Maintenance experience is beneficial but not mandatory. Color is a fundamental part of our work, and the ability to understand and manipulate color is crucial for success. ABOUT SURFACE EXPERTS Surface Experts does it all: Floors, Countertops, Bathtubs, Cabinets, Appliances, Furniture, Elevator Panels Almost Everything! We aim to be the one place fixes all for any kind of small surface damage. Traditional skills meet modern solutions: We deliver high-quality, long-lasting repairs with a smile. While many of our repairs are relatively small and straightforward, our competitors always want to completely resurface. Our repairs are often smaller than a dinner plate. This superior alternatives results in satisfied customers and long-term relationships. Our process minimizes materials in landfills while helping our customers save time and money! Our repair process needs minimal product usually just 1 to 2 tablespoons allowing our technicians to take everything they need with them in a small vehicle. Our method ensures a clean and smell-free experience, complete in less than two hours. VISION To establish and lead a nationally recognized market for surface repair as an alternative to replacement or complete refinishing. Our goal is to be represented in every major metropolitan area, and for our brand to be synonymous with spot repair among all facilities and maintenance management. MISSION Our mission is to develop outstanding teams by investing in strong relationships. Together, we work to solve our customers problems by reducing the waste of time, money, and materials that end up in landfills. VALUES Serve Others Put Relationships First No Jerks Be Humble Be a Problem Solver Be Curious Seek to Understand the Cause of the Problem Work Smart Constantly Improve Trust the Process Be Organized Be Teachable Put Business Needs Above Personal Wants

7148 - Jacksonville - 11335 Atlantic Blvd, Jacksonville, Florida, 32225CarMax, the way your career should be! Get to know our vehicles inside and out At CarMax, we create exceptional experiences for our customers. That means preparing every one of our vehicles for sale with quality care. Working alongside a team of experienced technicians, you will ensure the paintwork is finished to CarMax's high standards. We'll help bring out the best in you with a clean, modern, climate-controlled environment where you can work comfortably all year. You will also enjoy a generous range of company benefits including paid vacation, medical and retirement plans, and car purchase discounts. General Summary: Under general supervision, responsible for completion of all aspects of the paint preparation process. On as needed basis, responsible for Cosmetic Reconditioning Associate II, Flow Inventory Associate II duties. Principal Duties and Responsibilities: Complete body repairs, including masking, sanding, and grinding Apply primer Remove and replace parts Repair plastic and substrate damage Post-paint refinish and defect correction Ensure that all vehicles meet CarMax Paint Standards Maintain, repair, and clean special equipment Ensure workplace cleanliness and organization in accordance with CarMax 5S standards Provide outstanding customer service to both internal and external customers Complete duties as assigned by Managers Job Specifications: Position requires the following pre-requisites and ability: New Associate Orientation Training - Operations Accountable to Associate 1 Competency Model Kronos Training for Hourly Associates Meet Cosmetic Reconditioning Associate II and Flow Inventory Associate II Performance Standards Complete Cosmetic Reconditioning Associate II, Flow Inventory Associate II, and Senior Reconditioning Associate Workstation Certifications Read, interpret, and transcribe data in order to maintain accurate records Perform multiple duties in a high-energy, fast-paced environment Lift objects that weigh as much as 50lbs Speak and listen effectively in dealing with customers/associates, both in person and over the phone Complete CarMax provided training in all functional areas of the inventory process, allowing for cross-training and full coverage of the inventory and detail area Working Conditions: Indoor and outdoor environments may include working at times in noisy and/or inclement weather conditions. Requires walking or standing for extended periods of time. Variable work schedules with shifts that may include nights, weekends, holidays, and 12-hour days. Wears CarMax clothing (acquired through the company) at all times working in the store. Follow all CarMax, O.S.H.A., and EPA standards, including the use of Personal Protective Equipment and proper waste disposal in required areas. Adhere to all CarMax policies including Attendance, Asset Protection, Integrity and Standards of Professional Appearance. Disclaimer And Approvals: This document is intended to describe the general nature and level of work being performed by people assigned to this job. This information is current at the time of publication. Responsibilities may include other duties as assigned and may be amended at the discretion of CarMax with or without notice. This document has been reviewed and approved by management and Human Resources and can not be modified without written consent by a member of management authorized to modify any such responsibilities. CarMax is an Equal Opportunity Employer by both policy and practice and subscribes to federal and state laws which forbid discrimination because of race, color, age, religion, sex, national origin or disability. Employment at CarMax is at-will, and therefore, can be terminated, with or without cause, at any time, at the option of the associate or CarMax. This at-will employment relationship will remain in effect throughout an associate's employment with CarMax unless it is modified by a specific, express written employment contract that is signed by an officer of CarMax and the associate. This at-will employment relationship may not be modified by any oral or implied agreement. Specifically, this job description is not a contract of employment and does not create any contractual rights of any kind between the Company and its Associates. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

Benefits: Bonus based on performance Company car Company parties Free uniforms Opportunity for advancement Training & development Do you have a knack for fixing things with your hands? Thrive doing something different every day? You might be the perfect Surface Experts Technician! Complete small repairs daily by applying your creativity and using problem-solving skills. A Day in the Life of a Surface Experts Technician: ******************************************* WE OFFER: Base Salary + Bonus Opportunity: Performance-based commissions starting on day 1 Great Work/Life Balance: No required overtime, no nights, no weekends Time Off: Paid holidays and accruable vacation Flexible Work Schedule: Can accommodate midweek appointments Paid New Hire Training: Onboarding includes learning alongside a trained technician Company Car: Each technician drives a branded company vehicle for job duties Tools Included: All necessary tools and products are provided Learn a New Trade: Develop skills in a brand-new emerging trade Supportive Work Environment: Team celebrates achievements and collaborates in their approach to problem-solving Small Business: Local business with an owner who works alongside the team each day Mentorship Opportunities: Ongoing repair training and career development Dedicated Help Lines: Technician Support Team on call to assist to questions DUTIES: In the Field Daily Visit 4+ jobsites every day Repair damage on the job site while using exceptional customer service to follow up with staff Employ your creativity in several settings such as apartments, hotels, commercial buildings, and building sites Customer Service and Communication Use outstanding customer service to engage with staff and tenants Keep progress up to date with notes and updates in our CRM/Dispatch tool Reach out to our Support Team on any issue or question Follow Repair Process Develop an understanding of our own 5-step repair process and use it in the field Master each part of your custom-made tool-kit Think outside the box to create one-of-a-kind repairs We are in search of someone with experience in painting. This could be interior or exterior painting, or even painting in a visual art sense. Your knowledge of color and paint application will assist in the color matching portion of the repair process. QUALIFICATIONS Practical experience with a hands-on trade - Example include any part the construction, manufacturing, or painting process. Personal hobbies could work too! Maintenance experience is beneficial but not mandatory. Color is a fundamental part of our work, and the ability to understand and manipulate color is crucial for success. ABOUT SURFACE EXPERTS Surface Experts does it all: Floors, Countertops, Bathtubs, Cabinets, Appliances, Furniture, Elevator Panels … Almost Everything! We aim to be the “one place fixes all” for any kind of small surface damage. Traditional skills meet modern solutions: We deliver high-quality, long-lasting repairs with a smile. While many of our repairs are relatively small and straightforward, our competitors always want to completely resurface. Our repairs are often smaller than a dinner plate. This superior alternatives results in satisfied customers and long-term relationships. Our process minimizes materials in landfills while helping our customers save time and money! Our repair process needs minimal product - usually just 1 to 2 tablespoons - allowing our technicians to take everything they need with them in a small vehicle. Our method ensures a clean and smell-free experience, complete in less than two hours. VISION To establish and lead a nationally recognized market for surface repair as an alternative to replacement or complete refinishing. Our goal is to be represented in every major metropolitan area, and for our brand to be synonymous with spot repair among all facilities and maintenance management. MISSION Our mission is to develop outstanding teams by investing in strong relationships. Together, we work to solve our customers' problems by reducing the waste of time, money, and materials that end up in landfills. VALUES Serve Others Put Relationships First No Jerks Be Humble Be a Problem Solver Be Curious Seek to Understand the Cause of the Problem Work Smart Constantly Improve Trust the Process Be Organized Be Teachable Put Business Needs Above Personal Wants Compensation: $17.00 - $20.00 per hour About Surface Experts Surface Experts is an all-inclusive surface repair service provider. We repair small damage to surfaces like Floors, Countertops, Bathtubs, Cabinets, Appliances, Furniture, Elevator Panels … Almost Everything!. We pride ourselves in our ability to provide incredibly fast service, while maintaining a friendly and professional atmosphere in our support center and on jobsites. We combine old school skill sets with new technology and products, resulting in a durable and appealing repair all provided with a smile. Most repairs are simple and smaller than a dinner plate, yet our competition focuses on complete resurfacing. Our objective is a happy customer and a long-term relationship. We focus on saving our customers time, money and wasted materials that end up in a landfill. Our typical repair requires only 1 to 2 tablespoons of product so our technicians can carry their entire set of tools and equipment in a small vehicle. Our approach is clean and free of odors in less than two hours. Our Mission Our mission is to develop outstanding teams by investing in strong relationships. Together we work to solve our customers' problems by reducing the waste of time, money and materials which end up in landfills. Our Vision To establish and lead a nationally recognized market for surface repair as an alternative to replacement or complete refinishing. Our goal is to be represented in every major metropolitan area, and for our brand to be synonymous with spot repair among all facilities and maintenance management. Core Values Serve Others Put Relationships First No Jerks Be Humble Be a Problem Solver Be Curious Seek to Understand the Cause of the Problem Work Smart Constantly Improve Trust the Process Be Organized Be Teachable Put Business Needs Above Personal Wants This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Surface Experts Corporate.

Basic Purpose and Function: This skilled manufacturing position is responsible for providing maritime surface preparation and coatings for repairs to ships and boats in the U.S. Navy, U.S Coast Guard, Military Sealift Command (MSC), and commercial vessels. They must be able to complete and execute the assigned work tasks following regulatory specifications assigned to the vessel. Major Responsibility (Functions/Duties): Must be able to manage small teams within your discipline. Applies paint by brush, roller or spray to a uniform finish and film thickness. Observes and records environmental readings. Uses hand and power tools to prepare welds, burn backs, corrosion etc. for paint. Sets up, adjusts, abrasive blast equipment, conventional, and airless paint spray equipment. Sets up a tank or space with proper lighting and cross ventilation. Possesses the ability and experience to certify and to operate an aerial lift. Will be required to be crossed trained as a Competent Person and fire watch. Must understand and follow manufacturers SDS and Product Data Sheet (PDS) Must understand and follow Lock Out / Tag Out (LOTO) procedures. Must understand and follow Work Authorization (WAF) process. Must understand and follow all Hot Work procedures. Other duties may be assigned. Requirements Skills & Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. This position will require accessing the ship with the capability to lift up to 50 lbs. Applicant must be able to: Accomplish a specified surface preparation with hand and/or power tools Apply coatings in accordance with the manufacturer's specification by brush and roll. Build hazardous environment containments and install negative ventilation. Properly handle and dispose of hazardous materials. Work at heights and in confined spaces. Work in inclement weather conditions. Work non-standard work hours, as required. Education and Experience: Two (2+) years of marine paint experience preferred. Must possess basic math skills. SSPC certifications and training C-7 and/or C-12. Must be a U.S. citizen. Should have a working knowledge of the Naval Sea Systems (NAVSEA) Standard Items, specifically 009-32. Working knowledge of local NAVSEA Standard Items, specifically Southeast Regional Maintenance Center (SERMC).

7148 - Jacksonville - 11335 Atlantic Blvd, Jacksonville, Florida, 32225 CarMax, the way your career should be! Get to know our vehicles inside and out At CarMax, we create exceptional experiences for our customers. That means preparing every one of our vehicles for sale with quality care. Working alongside a team of experienced technicians, you will ensure the paintwork is finished to CarMax's high standards. We'll help bring out the best in you with a clean, modern, climate-controlled environment where you can work comfortably all year. You will also enjoy a generous range of company benefits including paid vacation, medical and retirement plans, and car purchase discounts. General Summary: Under general supervision, responsible for completion of all aspects of the paint preparation process. On as needed basis, responsible for Cosmetic Reconditioning Associate II, Flow Inventory Associate II duties. Principal Duties and Responsibilities: * Complete body repairs, including masking, sanding, and grinding * Apply primer * Remove and replace parts * Repair plastic and substrate damage * Post-paint refinish and defect correction * Ensure that all vehicles meet CarMax Paint Standards * Maintain, repair, and clean special equipment * Ensure workplace cleanliness and organization in accordance with CarMax 5S standards * Provide outstanding customer service to both internal and external customers * Complete duties as assigned by Managers Job Specifications: Position requires the following pre-requisites and ability: * New Associate Orientation Training - Operations * Accountable to Associate 1 Competency Model * Kronos Training for Hourly Associates * Meet Cosmetic Reconditioning Associate II and Flow Inventory Associate II Performance Standards * Complete Cosmetic Reconditioning Associate II, Flow Inventory Associate II, and Senior Reconditioning Associate Workstation Certifications * Read, interpret, and transcribe data in order to maintain accurate records * Perform multiple duties in a high-energy, fast-paced environment * Lift objects that weigh as much as 50lbs * Speak and listen effectively in dealing with customers/associates, both in person and over the phone * Complete CarMax provided training in all functional areas of the inventory process, allowing for cross-training and full coverage of the inventory and detail area Working Conditions: * Indoor and outdoor environments may include working at times in noisy and/or inclement weather conditions. * Requires walking or standing for extended periods of time. Variable work schedules with shifts that may include nights, weekends, holidays, and 12-hour days. * Wears CarMax clothing (acquired through the company) at all times working in the store. * Follow all CarMax, O.S.H.A., and EPA standards, including the use of Personal Protective Equipment and proper waste disposal in required areas. * Adhere to all CarMax policies including Attendance, Asset Protection, Integrity and Standards of Professional Appearance. Disclaimer And Approvals: This document is intended to describe the general nature and level of work being performed by people assigned to this job. This information is current at the time of publication. Responsibilities may include other duties as assigned and may be amended at the discretion of CarMax with or without notice. This document has been reviewed and approved by management and Human Resources and can not be modified without written consent by a member of management authorized to modify any such responsibilities. CarMax is an Equal Opportunity Employer by both policy and practice and subscribes to federal and state laws which forbid discrimination because of race, color, age, religion, sex, national origin or disability. Employment at CarMax is at-will, and therefore, can be terminated, with or without cause, at any time, at the option of the associate or CarMax. This at-will employment relationship will remain in effect throughout an associate's employment with CarMax unless it is modified by a specific, express written employment contract that is signed by an officer of CarMax and the associate. This at-will employment relationship may not be modified by any oral or implied agreement. Specifically, this job description is not a contract of employment and does not create any contractual rights of any kind between the Company and its Associates. Upon an applicant's request, CarMax will consider reasonable accommodation to complete the CarMax Job Application.

Are you interested in joining the only national marine surface preparation painting contractor servicing every U.S. Port? If so, IMIA is the company for you. Don't miss this opportunity to become part of our dynamic team. Apply today. JOB TITLE: Painter REPORTS TO: Paint Foreman Summary of position: Assist in surface preparation, mixing of paint, application of coating, striping, and clean up. Position requires willingness to learn, and the ability to follow directions concerning painting in the marine industry. May be required to perform additional duties as deemed necessary by the supervisor for the completion of the job in a safe and timely manner. Essential Job Requirements: Make certain surfaces are prepared for coating according to paint manufacturers' specifications; paint surfaces using approved methods, striping tanks in a productive and timely manner as well as mixing paint as directed; must work within OSHA requirements relative to the shipbuilding industry; must comply with company, federal, state, and local safety and environmental rules and regulations; accurately operate, clean, and maintain all assigned equipment; properly store equipment; dispose of empty paint and solvent cans appropriately; properly store and take appropriate precautions for paint and solvents as directed by supervisor; knowledgeable in checking wet film mil (WFT) thickness being applied; assist sprayers in pulling lines; must be able to correctly and promptly follow directions. May be required to perform additional duties as deemed necessary by the supervisor for the completion of the job in a safe and timely manner. Required Education: None Required Experience: Formal or informal on the job training and two years of experience in the application of coatings in the marine industry. Required Skills: Ability to take direction required. Must be able to work cooperatively and productively with other employees and shipyard personnel. Physical Requirements: Regularly required to walk; frequently required to stand, stoop, kneel, crouch, climb, balance, or crawl at various heights and in confined spaces; occasionally required to sit; required to reach with hands and arms, use hands to feel, grip, or handle; regularly required to safely lift and/or move up to 50 pounds; required use of vision to see up close, distance, and peripherally, as well as depth perception and ability to adjust focus in low light conditions. May be required to wear a respirator to safely perform assigned tasks. Must be able to follow clean shaven policy. Mental Requirements: Must be able to carry out simple directions in a safe, timely, and productive manner. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Equipment Used: Various dependent upon daily job assignment. Supervisory Responsibilities: None Working Conditions: Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, confined spaces, precarious places, close proximity to other employees. To avoid injury, personal protective equipment (PPE) required such as safety clothing, safety devices to protect personnel from bodily harm. Overtime or shift work involved most of the time. Travel often required.

Join Our Team as an Industrial Blaster Painter in Jacksonville, FL! Are you a skilled Industrial Blaster Painter looking for a new and exciting opportunity? Look no further than Unite Contracting Solutions! We are currently seeking a talented Industrial Blaster Painter to join our team in Jacksonville, FL. As an Industrial Blaster Painter with us, you will have the chance to showcase your expertise and contribute to our mission of providing top-quality industrial painting services to our clients. You will be sanding and painting as high as 180' in a BOOM MAN LIFT. Key Responsibilities: Prepare surfaces for industrial painting by cleaning, sanding, and smoothing them to ensure a smooth finish. Apply industrial paint coatings using a variety of techniques, including blasting. Operate painting equipment safely and efficiently Ensure that work meets quality standards and specifications Adhere to all safety protocols and guidelines As an Industrial Blaster Painter at Unite Contracting Solutions, you will have the opportunity to work on a wide range of projects and expand your skills in a supportive and collaborative environment. Whether you are an experienced professional or just starting in your career, we welcome you to apply and grow with us! Qualifications: Previous experience as an Industrial Blaster Painter or similar role Strong knowledge of industrial painting techniques and equipment Ability to work effectively in a team setting Excellent attention to detail and quality Positive attitude and willingness to learn About Us At Unite Contracting Solutions, we are a premier painting and contracting company dedicated to delivering exceptional service and results to our clients. With years of experience in the industry, we have built a reputation for excellence and reliability. Our team of skilled professionals is committed to upholding our values of integrity, quality, and teamwork in all that we do. Join us at Unite Contracting Solutions and be part of a dynamic team that values your expertise and passion for painting. Apply today and take the next step in your career as an Industrial Blaster Painter!

GENERAL DESCRIPTION Coats surfaces of military aircraft and components with paint, lacquer, epoxy, resin or other material, using Aerospace/aviation application techniques with spray guns, paint guns and other application devices * Removes old paint from aircraft, using liquid paint remover and scraper; * Smooths surface with sandpaper and steel wool; * Roughens aluminum surfaces with acid solution and steel wool to ensure that paint adheres to surface; * Masks and covers portions of surfaces not to be painted; and * Assemble staging, scaffolds and work stands necessary to perform the full function of the paint shop; * Prepare aircraft, engines, SE and components for finish using various chemicals, detergents and solvents in conjunction with high pressure steam and water; * Apply chemical conversion coating to bare substrate, sand and featheredge existing coatings using various grits of abrasives; * Apply protective and decorative coating and paint finishes to aircraft, engines, ground SE and components; * Paint insignias, lettering and designs on aircraft and components; * Apply decals transfer and stencils to identify and decorate aircraft, engines, ground SE and components; * Perform high finish and critical tolerance painting on aircraft, engines, ground SE and components; * Apply sophisticated coating materials such as, but not limited to, waterbornes, elastomeric, low volatile organic compounds materials to aircraft, engines, ground SE and components; * Apply radiation-reflecting coatings to cockpit and canopy enclosures; * Mix primers, sealers and topcoat material to required viscosity for individual job or entire paint shop; * Treat corrosion and perform wet and dry tape tests; * Possess a current license to operate a portable man lift and shall have skills in the use of measuring devices and gauges used to determine thickness, viscosity, surface smoothness and gloss of the applied coatings; * Prepare the substrate for coating using a variety of pretreatment methods using chemicals, detergents and solvents in conjunction with high-pressure steam and water; * Perform sanding and featheredging to existing coatings and select proper grit abrasives necessary to ensure adequate substrate smoothness prior to the finish application; * Mask and protect surfaces not to be finished by the use of masking tape, discs, fixtures, plugs and/or covers; * Use and maintain conventional, electrostatic and high volume low pressure (HVLP) paint equipment and shall use a variety of materials such as lacquers, enamels, sealers, urethanes, waterbornes, epoxies, elastomerics and ceramic coatings; * Shall manufacture and maintain stencils, patterns, layouts and apply national and foreign insignias, special markings and designs required by military specifications and individual activities. * Other Duties as Assigned EDUCATION/EXPERIENCE REQUIREMENTS * High School Diploma or equivalent * Prefer experience from military aerospace community or civilian heavy structure background * At least two (2) years of documented experience in Aerospace and/or Aircraft painting procedures and processes * Prefer Military aircraft Paint & Insignia School/training or civilian equivalent. * Must be a US Citizen * Must be able to pass a National Agency background check, which could include a criminal history and credit check for access to Government facilities. * We maintain a drug-free workplace and perform post offer, pre-employment substance abuse testing. PHYSICAL REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. * Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day. * Must be able to climb stairs, ramps, ladders, and work stands. * Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. * Must be able to work in small and confined spaces. * May be required to lift up to 50 pounds. * May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools. * Must be able to see imperfections, micrometer readings and other small scales. * Must be able to communicate by voice and detect sound by ear. * Must be able to distinguish color and judge three-dimensional depth. * May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc. EQUAL OPPORTUNITY EMPLOYER / VEVRAA /ADA TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Opportunity Employer and a VEVRAA Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities: Tyonek Native Corporation provides all employees and job applicants' equal employment opportunities in hiring and promotion without discrimination because of age, sex, sexual orientation, genetic information, gender identity, marital status, race, religion, color, veteran status, physical or mental disability, national origin, or any other reason prohibited by law. #jsfirm

FLSA: Non- Exempt Department: Paint Job Title: Aircraft Painter Reports To: Paint Department Supervisor DOT/ NON- DOT: DOT Position Summary Performs complex tasks in preparing metal and other surfaces on aircraft and equipment for painting. Applies lacquers, primers, synthetic enamels, polyurethane, and epoxy with spray guns, brushes and rollers. Painters will also support by painting ground support equipment. Reads and complies with instructions and safety information as necessary for proper and safe completion of assigned work. Job Duties and Responsibilities 1 Demonstrates proficiency of aircraft systems and theory of operations. 2 Demonstrates expertise in appropriate tooling, equipment, reference manuals and follow instructions with minimal errors. 3 Masks trim and other parts not to be painted; cleans, sands and prepares surfaces for painting independently or with others with no supervision. 4 Applies primer and finish coats to aircraft, parts and GSE equipment. Uses lacquers and synthetic paints and enamels; applies decals, pressure sensitive and scotch lite numbers, letters, seals, and trim independently or with others with no supervision. 5 Performs as the Alternate Lead and related functions, as required. 6 Maintains paint supplies and materials and ensures adequate inventory on hand. 7 Mixes and matches paints for complex paint tasks. 8 Ensures proper cleaning and maintenance of spray guns and other painting equipment. 9 Reads and interprets aircraft paint drawings and follows them accurately to accomplish paint job and ensures regulatory, emergency and other customer placards are correct. Reads instructions and all cautions/warnings/notes information as necessary for proper and safe completion of assigned work. 10 Prepares and maintains simple records such as work order documentation, turn over logs, and time and material records, as instructed. 11 Reads task cards and follows them accurately to accomplish paint job ensuring FAA, emergency and other customer placards are correct. 12 Follows safety procedures and wears/uses appropriate safety equipment for the work being performed. Complies with all safety procedures at all times, without exception. 13 Records time worked as directed by supervisor. 14 Performs work standards that meet and comply with all federal, customer and company policies and procedures which apply. 15 Keeps informed of policies and procedures and asks supervisor for explanations if needed. 16 Maintains work-related training and qualifications as required. 17 Performs other duties as assigned. Key Interactions Internal Departments or Job Titles Immediate Supervisor Line Managers and Supervisors Lead workers and other employees External Businesses or Organization Customer Reps Position Profile Required Desired Academic Qualifications High School Diploma or GED x Languages Must be able to read, write, and speak effectively in English regarding safety sensitive work activities x Special Licenses FAA Airframe and Powerplant Certification x Hold a valid state driver license x Previous Experience Three (3) to five (5) years of relevant aircraft painter experience providing knowledge of work techniques, terminology, parts, etc. preferred. x Technical Skills Must possess good knowledge of safety precautions required in performing the work of the trade, general knowledge of stenciling, skill in the use of spray guns and the ability to mix and match paints. Familiar with 14 CFR Part 91/121/145 preferred x Physical Requirement Lifts and carries hand tools, parts, and work materials; ascends and descends ladders and platforms; and frequently works in a variety of positions such as stooping, kneeling or squatting. Works around unpleasant or toxic fumes and materials. Must have initial (baseline) and annual physicals to ensure continued good personal health as required by law. x

We are seeking Industrial Painters for a great career opportunity in the Green Cove Springs, FL area who will be responsible for maintaining technical equipment for the job and ensuring that they are in working order, using a wide array of painting tools including thin and thick brushes and airbrushes, among other duties. Overtime every week with a standard 50 hour work week means you earn over $1000 per week! Schedule: 2nd Shift - Monday thru Friday, 3:30pm to 2am Pay: Starting from $18/hr - higher for experienced painters Job Duties of the Industrial Painter: Paint sheet metal components. Prepare surfaces for painting. Maintain technical equipment for the job and ensure that they are in working order. Possess the ability to use an array of painting tools, including thin and thick brushes, airbrushes, and rollers. Safely dispose of chemical waste. Ensure that high safety standards are met. Utilize different painting techniques based on the nature of the surface. Utilize special safety equipment such as painting goggles. Use viscosity cups and thickness gauges to measure the amount of paint to be used and the texture of the paint. Paint small items and do touch-ups. Ensure proper ventilation after the paint is applied. Polish metallic surfaces. Skills and Qualifications of the Industrial Painter: High school diploma or GED. Some experience painting with a spray gun. Proficiency with technical machinery. Must be able to lift up to 50 lbs. Diligence and attention to detail. Excellent dexterity and hand-eye coordination. Good communication and organizational skills. This is a Temp-to-Hire position and the client offers benefits once Hired In. This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check.

Do you have a passion for repairing cars, assisting with providing exceptional guest experiences, and being an innovator in the automotive industry? As a Body Shop Painter, you will have the opportunity to make a positive impact on our business and customers every day while earning the pay you deserve and awesome benefits! We are looking for an energetic, technically-focused Painter who will help us redefine the car-servicing experience The Body Shop Painter is responsible for repairing and restoring all assigned vehicles to pre accident condition. This will include but is not limited to refinishing, priming, sanding and buffing of body parts and bodies of vehicles in accordance with factory and dealership quality specifications and time standards. Perform quality repairs without passing on defects Paint vehicle surfaces by utilizing a sprayer or brush when applicable Mix paint according to manufacture specifications Produce test panels when needed to obtain industry acceptable color match Consistently utilize all required safety equipment and follow proper repair procedures Understand and keep abreast of and comply with federal, state and local regulations that affect body shop operations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Maintain an organized personal work area and returns tools, materials and equipment to designated areas Demonstrate a commitment to continued learning by ongoing participation in I-CAR Previous auto body painting experience required Periodic lifting and carrying objects over 50 pounds is required May be exposed to chemicals, fumes, high levels of dust and noise in repair center Must be able to wear protective equipment, including respirator Must be a minimum of eighteen years of age Must have a valid Driver's License Must be able to pass pre-employment screens (background & drug test) Company Benefits: Pay and Recognition: Weekly pay Paid holidays & paid time off Deferred Holiday Pay Match Paid training Stock Awards(select management and front-line team member's eligible Insurance / Retirement: Insurance: medical, vision, dental, accident, critical illness and hospital indemnity plans Up to 12 weeks paid pregnancy leave (disability leave) Paid Parental Leave Health savings Flex spending accounts (tax free) Short-term and Long-term disability plans Life Insurance (Whole Life and Term) 401k with company match Learning, Tuition Assistance and Career Development: Digital career path tool to assist with career development Continuous training through Asbury's Internal Learning Management System Professional growth and development opportunities Additional advantages: Student loan relief resources Employee assistance program Employee discounts on parts and service repairs Scholarship awards Opportunities to join our community service initiatives, which includes paid volunteer hours Aggressive Employee referral program with bonus opportunities INDCOLLISION

You'll Love Working with us: Metson Marine Services, Inc (MMSI) has been dedicated to providing ocean transportation, vessel operations, and ocean environmental services for the past 37 years. Over those 37 years, MMSI has expanded its business to both commercial and government contracting. Since 1984 the Metson Companies have owned and/or operated a fleet of work boats, including Platform Support, Crew Boats, Oil Spill Response, Diving & ROV Support, Ocean Survey, and other Special Missions. Since 1997, MMSI has operated and maintained a diverse fleet of Government owned ships, vessels, and small craft. Core Values: As an ISO 9001:2015 certified company, MMSI is dedicated to: Protecting shipboard and shore side personnel Protecting our vessels and facilities Protecting the environment • Meeting or exceeding customer requirements Geographic locations in which MMSI currently operates include the U.S East, Gulf & West Coasts, and Alaska. The Corporate Office is in Southern California (Ventura) and its Regional Boat Maintenance Center a technically advanced facility in Woodbine Georgia. How you would make an impact/key responsibilities: Join the dynamic MMSI team as a Marine Painter responsible for performing maintenance and repair for the Southeast Region Port Operations for the Navy. This position is located at our Regional Boat Maintenance Center in Woodbine, GA. Job responsibilities include but are not limited to: The Marine Painters are trained to SSP-3 and SSPC-SP-11 standards using power tools. A candidate must be able to learn the proper method for applying coatings while maintaining desired MIL thickness. A candidate will be required to work in a physically demanding environment including confined spaces and heights. A candidate must be able to use power tools, hand tools, or chemicals to accomplish cleaning of surfaces prior to applying coating systems. Nearly every component or structural element aboard ship requires specific coatings, this is why the painter is responsible for selecting and applying a wide variety of marine coating systems. Coatings protect the steel and other surfaces from rust and corrosion, protect the underwater portion from the attachment of marine life, and enhance the general appearance of the ship. The painter prepares the surface, masks unpainted areas, sandblast surfaces, selects the methods of coating application and provides suitable curing conditions. In addition to modern paint techniques, the painter may work with power coating, non-skid, and other special hull treatments. The painter must interpret paint schedules, calculate surface areas, estimate the amount of materials required, test the grade, viscosity and fineness of the paint, and perform final quality inspections. Basic Qualifications Qualified candidates must have at least one (1) of the two (2) below in order to be considered for this position: Two or more years' experience in Painting Candidates must not be afraid of heights or working in confined spaces. Must be able to kneel, squat, crawl, bend, stoop, and climb. Must be able to lift 40 lbs. and must take and pass a respirator fit test. Must be able to work assigned shift as production needs. Preferred Qualifications Experience in commercial or industrial paint High school graduate or equivalent preferred Principals and techniques of marine painting operations Minimum Qualifications Skills: Use of tools and equipment to paint and repair marine equipment Use of pneumatic, hydraulic and marine tools What is needed to succeed: Ability to obtain a Military Base Access and pass required physical and drug screening Willingness to work in a dynamic environment Proven track record of excellence Physical Demands Light to Moderate. Please refer to the USCG Merchant Mariner Medical and Physical Examination Requirements for Merchant Mariner Credentials (Form CG-719 K). Work Environment: Pier side, associated facilities and aboard vessels and craft. Benefits: Leave- Paid Holidays Vacation (after 1 year of service) Sick Insurance- Medical Dental Vision Health Savings Retirement- 401(k) Miscellaneous- Tuition assistance (after 2 years of service)

Are you seeking a job with benefits and longevity? BAE Systems Jacksonville Ship Repair Division maybe the answer to your job search. We presently have openings for Painters. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the knowledge, skill, and/or ability desired. The individual must have working knowledge of procedures, strong mechanical aptitude and ability, and be able to follow directions. The individual must have a thorough knowledge of equipment used in surface preparation and coating application operations. The individual must demonstrate ability to interpret job specifications, instruction manuals, and manufacturer's handbooks. The individual must have thorough knowledge of the application and operation of equipment used in surface preparation and coating operations at BAE Systems. Must be able to follow directions and work with limited supervision. Must be willing to work with and train subordinates. SAFETY/ENVIRONMENTAL Must comply with Company safety rules and OSHA standards. Must be physically and medically qualified to wear required personal protective equipment as prescribed under OSHA standards. Must handle hazardous materials/waste in compliance with local, state and federal regulations and in accordance with procedures. ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. SURFACE PREPARATION HIGH PRESSURE WASHING * Can make-up and set-up high pressure wash equipment, hoses and lines. * Can run high pressure wash equipment. * Can high pressure wash blast at better than a 400 sq-ft per hour rate. SOLVENT CLEANING (DEGREASING) * Can set-up solvent cleaning equipment. * Can solvent clean at a 250 sq-ft per hour rate. DRY GRIT BLAST CLEANING * Can make-up and set-up blast equipment, hoses and lines. * Can run blast equipment. * Can dry grit blast clean at better than a 100 sq-ft per hour rate. * Ability to sandblast and paint in confined spaces. WET GRIT BLAST CLEANING * Can make-up and set-up blast equipment, hoses and lines. * Can run blast equipment. * Can dry grit blast clean at better than a 90 sq-ft per hour rate. UHP WATER JET CLEANING * Can make-up and set-up UHP Water Jet equipment, hoses and lines. * Can run UHP Water Jet equipment. * Can UHP Water Jet clean at better than a 70 sq-ft per hour rate. UHP GRIT INJECTED WATER JET CLEANING * Can make-up and set-up UHP Water Jet abrasive injection equipment, hoses and lines. * Can run UHP Water Jet with abrasive injection equipment. * Can UHP Water Jet clean with abrasive injection at better than an 80 sq-ft per hour rate. PAINTING * Can set-up paint pumps, hoses and lines. * Can mix and thin all types of coatings as instructed in written specification or work package. * Proficient at spraying with conventional and airless spray guns. * Environmentals * Coating Report * Comply with NESHAP requirements. * Complies with proper storage and precautions for paints and solvents. * Ability to check mil thickness and record data in work package. * Complies with proper disposal of empty paint and solvent cans. * Can clean and maintain all surface preparation and coating equipment. * Can troubleshoot and repair malfunctioning surface preparation and coating equipment. * Can cleanup and prepare surface preparation and coating equipment for stowage. * Can clean tanks and machinery spaces to gas-free specifications. SUMMARY To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the knowledge, skill, and/or ability desired. The individual must have working knowledge of procedures, strong mechanical aptitude and ability, and be able to follow directions. The individual must have a thorough knowledge of equipment used in surface preparation and coating application operations. The individual must demonstrate ability to interpret job specifications, instruction manuals, and manufacturer's handbooks. The individual must have thorough knowledge of the application and operation of equipment used in surface preparation and coating operations at BAE Systems. Must be able to follow directions and work with limited supervision. Must be willing to work with and train subordinates. SAFETY/ENVIRONMENTAL Must comply with Company safety rules and OSHA standards. Must be physically and medically qualified to wear required personal protective equipment as prescribed under OSHA standards. Must handle hazardous materials/waste in compliance with local, state and federal regulations and in accordance with procedures. ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. SURFACE PREPARATION HIGH PRESSURE WASHING * Can make-up and set-up high pressure wash equipment, hoses and lines. * Can run high pressure wash equipment. * Can high pressure wash blast at better than a 400 sq-ft per hour rate. SOLVENT CLEANING (DEGREASING) * Can set-up solvent cleaning equipment. * Can solvent clean at a 250 sq-ft per hour rate. DRY GRIT BLAST CLEANING * Can make-up and set-up blast equipment, hoses and lines. * Can run blast equipment. * Can dry grit blast clean at better than a 100 sq-ft per hour rate. * Ability to sandblast and paint in confined spaces. WET GRIT BLAST CLEANING * Can make-up and set-up blast equipment, hoses and lines. * Can run blast equipment. * Can dry grit blast clean at better than a 90 sq-ft per hour rate. UHP WATER JET CLEANING * Can make-up and set-up UHP Water Jet equipment, hoses and lines. * Can run UHP Water Jet equipment. * Can UHP Water Jet clean at better than a 70 sq-ft per hour rate. UHP GRIT INJECTED WATER JET CLEANING * Can make-up and set-up UHP Water Jet abrasive injection equipment, hoses and lines. * Can run UHP Water Jet with abrasive injection equipment. * Can UHP Water Jet clean with abrasive injection at better than an 80 sq-ft per hour rate. PAINTING * Can set-up paint pumps, hoses and lines. * Can mix and thin all types of coatings as instructed in written specification or work package. * Proficient at spraying with conventional and airless spray guns. * Environmentals * Coating Report * Comply with NESHAP requirements. * Complies with proper storage and precautions for paints and solvents. * Ability to check mil thickness and record data in work package. * Complies with proper disposal of empty paint and solvent cans. * Can clean and maintain all surface preparation and coating equipment. * Can troubleshoot and repair malfunctioning surface preparation and coating equipment. * Can cleanup and prepare surface preparation and coating equipment for stowage. * Can clean tanks and machinery spaces to gas-free specifications. Required Education, Experience, & Skills Marine preservation certifications, i.e. SSPC C7, C12, C13, C14, CAS Level 2 Must be able to obtain and maintain Defense Biometrics Identification \"DBIDS\" Access card.Preferred Education, Experience, & Skills Marine Maritime Preservation Experience desired . Pay Information Full-Time Salary Range: $39749 - $66165 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. About BAE Systems Platforms & Services BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. The Platforms & Services (P&S) sector under BAE Systems, Inc does the big stuff: the armored combat vehicles, naval guns, missile launchers, and naval ship repair…just to name a few. Our employees take pride in the work they do and why they do it. They are on the front lines every day, building our products to protect the lives of those who serve. We may be biased, but we think P&S does some of the coolest work around, and we think you will too. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified.

Job DescriptionDescription: Basic Purpose and Function: This skilled manufacturing position is responsible for providing maritime surface preparation and coatings for repairs to ships and boats in the U.S. Navy, U.S Coast Guard, Military Sealift Command (MSC), and commercial vessels. They must be able to complete and execute the assigned work tasks following regulatory specifications assigned to the vessel. Major Responsibility (Functions/Duties): Must be able to manage small teams within your discipline. Applies paint by brush, roller or spray to a uniform finish and film thickness. Observes and records environmental readings. Uses hand and power tools to prepare welds, burn backs, corrosion etc. for paint. Sets up, adjusts, abrasive blast equipment, conventional, and airless paint spray equipment. Sets up a tank or space with proper lighting and cross ventilation. Possesses the ability and experience to certify and to operate an aerial lift. Will be required to be crossed trained as a Competent Person and fire watch. Must understand and follow manufacturers SDS and Product Data Sheet (PDS) Must understand and follow Lock Out / Tag Out (LOTO) procedures. Must understand and follow Work Authorization (WAF) process. Must understand and follow all Hot Work procedures. Other duties may be assigned. Requirements: Skills & Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. This position will require accessing the ship with the capability to lift up to 50 lbs. Applicant must be able to: Accomplish a specified surface preparation with hand and/or power tools Apply coatings in accordance with the manufacturer's specification by brush and roll. Build hazardous environment containments and install negative ventilation. Properly handle and dispose of hazardous materials. Work at heights and in confined spaces. Work in inclement weather conditions. Work non-standard work hours, as required. Education and Experience: Two (2+) years of marine paint experience preferred. Must possess basic math skills. SSPC certifications and training C-7 and/or C-12. Must be a U.S. citizen. Should have a working knowledge of the Naval Sea Systems (NAVSEA) Standard Items, specifically 009-32. Working knowledge of local NAVSEA Standard Items, specifically Southeast Regional Maintenance Center (SERMC).

Are you seeking a job with benefits and longevity? BAE Systems Jacksonville Ship Repair Division maybe the answer to your job search. We presently have openings for Painters. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the knowledge, skill, and/or ability desired. The individual must have working knowledge of procedures, strong mechanical aptitude and ability, and be able to follow directions. The individual must have a thorough knowledge of equipment used in surface preparation and coating application operations. The individual must demonstrate ability to interpret job specifications, instruction manuals, and manufacturer's handbooks. The individual must have thorough knowledge of the application and operation of equipment used in surface preparation and coating operations at BAE Systems. Must be able to follow directions and work with limited supervision. Must be willing to work with and train subordinates. SAFETY/ENVIRONMENTAL Must comply with Company safety rules and OSHA standards. Must be physically and medically qualified to wear required personal protective equipment as prescribed under OSHA standards. Must handle hazardous materials/waste in compliance with local, state and federal regulations and in accordance with procedures. ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. SURFACE PREPARATION HIGH PRESSURE WASHING - Can make-up and set-up high pressure wash equipment, hoses and lines. - Can run high pressure wash equipment. - Can high pressure wash blast at better than a 400 sq-ft per hour rate. SOLVENT CLEANING (DEGREASING) - Can set-up solvent cleaning equipment. - Can solvent clean at a 250 sq-ft per hour rate. DRY GRIT BLAST CLEANING - Can make-up and set-up blast equipment, hoses and lines. - Can run blast equipment. - Can dry grit blast clean at better than a 100 sq-ft per hour rate. - Ability to sandblast and paint in confined spaces. WET GRIT BLAST CLEANING - Can make-up and set-up blast equipment, hoses and lines. - Can run blast equipment. - Can dry grit blast clean at better than a 90 sq-ft per hour rate. UHP WATER JET CLEANING - Can make-up and set-up UHP Water Jet equipment, hoses and lines. - Can run UHP Water Jet equipment. - Can UHP Water Jet clean at better than a 70 sq-ft per hour rate. UHP GRIT INJECTED WATER JET CLEANING - Can make-up and set-up UHP Water Jet abrasive injection equipment, hoses and lines. - Can run UHP Water Jet with abrasive injection equipment. - Can UHP Water Jet clean with abrasive injection at better than an 80 sq-ft per hour rate. PAINTING - Can set-up paint pumps, hoses and lines. - Can mix and thin all types of coatings as instructed in written specification or work package. - Proficient at spraying with conventional and airless spray guns. - Environmentals - Coating Report - Comply with NESHAP requirements. - Complies with proper storage and precautions for paints and solvents. - Ability to check mil thickness and record data in work package. - Complies with proper disposal of empty paint and solvent cans. - Can clean and maintain all surface preparation and coating equipment. - Can troubleshoot and repair malfunctioning surface preparation and coating equipment. - Can cleanup and prepare surface preparation and coating equipment for stowage. - Can clean tanks and machinery spaces to gas-free specifications. SUMMARY To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The qualifications listed below are representative of the knowledge, skill, and/or ability desired. The individual must have working knowledge of procedures, strong mechanical aptitude and ability, and be able to follow directions. The individual must have a thorough knowledge of equipment used in surface preparation and coating application operations. The individual must demonstrate ability to interpret job specifications, instruction manuals, and manufacturer's handbooks. The individual must have thorough knowledge of the application and operation of equipment used in surface preparation and coating operations at BAE Systems. Must be able to follow directions and work with limited supervision. Must be willing to work with and train subordinates. SAFETY/ENVIRONMENTAL Must comply with Company safety rules and OSHA standards. Must be physically and medically qualified to wear required personal protective equipment as prescribed under OSHA standards. Must handle hazardous materials/waste in compliance with local, state and federal regulations and in accordance with procedures. ESSENTIAL QUALIFICATIONS, DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. SURFACE PREPARATION HIGH PRESSURE WASHING - Can make-up and set-up high pressure wash equipment, hoses and lines. - Can run high pressure wash equipment. - Can high pressure wash blast at better than a 400 sq-ft per hour rate. SOLVENT CLEANING (DEGREASING) - Can set-up solvent cleaning equipment. - Can solvent clean at a 250 sq-ft per hour rate. DRY GRIT BLAST CLEANING - Can make-up and set-up blast equipment, hoses and lines. - Can run blast equipment. - Can dry grit blast clean at better than a 100 sq-ft per hour rate. - Ability to sandblast and paint in confined spaces. WET GRIT BLAST CLEANING - Can make-up and set-up blast equipment, hoses and lines. - Can run blast equipment. - Can dry grit blast clean at better than a 90 sq-ft per hour rate. UHP WATER JET CLEANING - Can make-up and set-up UHP Water Jet equipment, hoses and lines. - Can run UHP Water Jet equipment. - Can UHP Water Jet clean at better than a 70 sq-ft per hour rate. UHP GRIT INJECTED WATER JET CLEANING - Can make-up and set-up UHP Water Jet abrasive injection equipment, hoses and lines. - Can run UHP Water Jet with abrasive injection equipment. - Can UHP Water Jet clean with abrasive injection at better than an 80 sq-ft per hour rate. PAINTING - Can set-up paint pumps, hoses and lines. - Can mix and thin all types of coatings as instructed in written specification or work package. - Proficient at spraying with conventional and airless spray guns. - Environmentals - Coating Report - Comply with NESHAP requirements. - Complies with proper storage and precautions for paints and solvents. - Ability to check mil thickness and record data in work package. - Complies with proper disposal of empty paint and solvent cans. - Can clean and maintain all surface preparation and coating equipment. - Can troubleshoot and repair malfunctioning surface preparation and coating equipment. - Can cleanup and prepare surface preparation and coating equipment for stowage. - Can clean tanks and machinery spaces to gas-free specifications. Required Skills and Education Marine preservation certifications, i.e. SSPC C7, C12, C13, C14, CAS Level 2 Must be able to obtain and maintain Defense Biometrics Identification "DBIDS" Access card. About BAE Systems Platforms & Services Posting BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. The Platforms & Services (P&S) sector under BAE Systems, Inc does the big stuff: the armored combat vehicles, naval guns, missile launchers, and naval ship repair…just to name a few. Our employees take pride in the work they do and why they do it. They are on the front lines every day, building our products to protect the lives of those who serve. We may be biased, but we think P&S does some of the coolest work around, and we think you will too. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified. Preferred Skills and Education Marine Maritime Preservation Experience desired . Benefits Information Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. Intern Benefits: Temporary employees generally are not eligible for BAE Systems benefits, but can elect to participate in the 401(k) savings plan. Temporary employees working 20+ hours per week are eligible for medical benefits, the employee assistance program, and business travel accident insurance. Please note: Some benefits may be different for union employees that are governed by a collective bargaining agreement (CBA) or for positions covered by a wage law called the McNamara-O'Hara Service Contract Act (SCA).