Painter jobs in Laguna Niguel, CA - 56 jobs

Under the direction of the department Supervisor/Manager, the Painter is responsible for coating surface parts, assembling and finishing products with protective or decorative materials such as paint, varnish, enamel, lacquer, dope or stain using spray gun. ESSENTIAL DUTIES & RESPONSIBILITIES: • Determines and selects correct mixes of coating material. • Applies paint to parts as directed by job orders. • Identifies and coats areas that are inaccessible to hand sprayer. • Identifies problems with equipment and will troubleshoot or repair paint guns. • Responsible for running ovens as needed. • Will complete visual inspection of masking on parts to ensure consistency as well as inspect for damaged product. • Completes necessary paperwork. • Works closely with the production team and assist as needed. • Adheres to safety regulations. • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Ability to communicate, read, and understand English. • Basic math skills. • Experience using and troubleshooting gravity spray gun. • Previous experience in aerospace industry or automotive repair, a plus. • Ability to effectively communicate both verbally and in writing with team members at all levels in the organization. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Walking/Standing for prolonged periods of time • Ability to lift up to 30 lbs • Exposed heat, noise and chemical fumes while in production areas • Good hand and eye coordination and movement We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws.

About Found Rental Co. As a premier luxury event furnishing rental company, we partner with clients to transform their visions into unforgettable experiences. Our success is built on a foundation of strong values and a passionate team. We firmly believe in our mission of creating spaces that inspire and bring comfort. Our team lives by five core values, and we are looking for someone who not only understands them, but actively works and leads by them. Collaboration: Succeed as a team Heart: Relentlessly care for others Authenticity: Bring our best self Integrity: Do the right thing Reliability: Be dependable The Role T The Painter at Found Rental Co. is a hands-on artisan responsible for painting, staining, refinishing, and repairing furniture and décor to Found's premium quality standards. This role plays a critical part in preserving the beauty, durability, and presentation of our one-of-a-kind inventory. Working closely with our craftsmen, the Painters at Found ensures every piece is finished with care, precision, and consistency. This role is ideal for a detail-driven finisher who takes pride in beautiful work, thrives in an organized workshop environment, and is passionate about craftsmanship. The Found Difference: Our Core Values in Action Collaboration (Succeed as a Team): You partner daily with craftsmen, journeymen, and apprentices to complete projects on time and to specification. You communicate clearly and support smooth production workflows Heart (Relentlessly Care for Others): You treat every piece as if it were going into your own home. You care deeply about quality, safety, and the people you work alongside. Authenticity (Bring Our Best Self): You bring pride and passion to your craft. You value beautiful finishes and believe great work shows in the details. Integrity (Do the Right Thing): You never cut corners. If a finish isn't right, you fix it. You hold yourself to Found's high standards of quality and presentation. Reliability (Be Dependable): You are a steady and trusted member of the Fab Lab. Your team can rely on you to meet timelines, follow processes, and deliver consistent results. Key responsibilities: PAINTING, REFINISHING & REPAIRS Paint, stain, and refinish furniture and décor made from wood, metal, and mixed materials Perform touch-ups and repairs to maintain the appearance and extend the life of inventory Prepare surfaces for finishing, including sanding, cleaning, filling, and priming Mix and match paints, stains, and finishes to achieve accurate colors and textures Apply finishing techniques that meet Found's quality and aesthetic standards WORKSHOP OPERATIONS Collaborate closely with craftsmen to complete projects efficiently and to specification Safely and effectively operate painting and finishing tools and equipment Follow all finishing processes, quality standards, and production timelines ORGANIZATION & SAFETY Maintain cleanliness and organization of all painting and finishing areas Follow safety protocols when working with paints, chemicals, and equipment Support overall Fab Lab organization and workflow Properly store materials, tools, and works-in-progress Qualifications Proven experience in painting, staining, refinishing, or furniture finishing Strong understanding of finishing materials, tools, and techniques Exceptional attention to detail and pride in craftsmanship Ability to work efficiently while maintaining high-quality standards Strong organizational and time-management skills Ability to follow safety guidelines and maintain a safe work environment Excellent communication and teamwork abilities Craftsmanship Traits We Value: Detail Driven: You believe beautiful finishes make all the difference Quality First: You never compromise on standards Workshop Partner: You support smooth daily operations Safety Focused: You protect yourself, your teammates, and the shop Pride in Craft: You take ownership of your work Reliable Finisher: You deliver consistent, beautiful results Benefits & Compensation Competitive pay commensurate with experience Comprehensive health, dental, and vision insurance Paid time off and company holidays 401K Retirement Plan Mental Health services Pay Range: $28-$32/hour based on experience Equal Opportunity Employer Found Rental Co. is an Equal Opportunity Employer (EOE). We are committed to a diverse and inclusive workplace and prohibit discrimination and harassment of any kind. Found Rental Co. affords equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), national origin, age, disability, citizenship, marital status, sexual orientation, gender identity or expression, genetic information, veteran status, or any other characteristic protected by law. Found Rental Co. is committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, please contact us at ************ for assistance. Our commitment to being an EOE aligns directly with our core values of Heart and Collaboration. We believe that diverse perspectives fuel inspiration and bring comfort, making our company stronger and better able to serve our clients.

Position Title: Painter Pay Range: $24.00 to $32.00 per hour (wage based on experience and qualifications) Schedule: Monday-Thursday 7:00 am to 3:30 pm; Friday 6:00 am to 2:30 pm. Performs a variety of skilled painting activities, and may perform other maintenance-related duties as needed. This is a temporary seasonal position not to exceed 122 days that will be scheduled full-time hours. Essential Functions: Scrapes, sands, and fills surfaces in preparation for painting and finishing. Applies base coats and finish coats with brush or sprayers. Matches paints and finishes, cleans, and maintains brushes and other equipment. Prepares simple designs, and orders and stores painting materials. Maintains simple records and prepares reports. Consults with other skilled trades' people as needed. Instructs and leads unskilled assistants. Presents estimated time and materials required for each project to supervisor for approval. May assist in unskilled general maintenance and repair activities, including plumbing, electrical and landscaping duties as needed. This description in no way implies that these are the only duties to be performed by the employee occupying this position. Qualifications: Must be at least 18 years of age. 3+ years of experience as a painter. Must be familiar with common safety rules and practices. Ability to work outside the normal business day/week as demanded by events and programs. Must be available to work 5 days per week, on any shift (days, swing, graveyard) between mid-July and mid-August. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to walk, stand, talk and hear. The employee must frequently use hands and fingers to operate, handle, or feel objects, tools, or controls; and reach with hands and arms. The employee must occasionally lift and/or move up to 50 pounds, using proper bending and lifting. Specific vision abilities required by this job include close vision and the ability to adjust focus. Must be able to walk and stand for extended periods of time. Work Environment: Will work in a fast-paced, indoor and outdoor environment in all types of weather. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderately loud, however louder noise levels may be experienced during outdoor events and when in larger event buildings. The duties listed above are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. Will be required to perform other duties as directed, requested or assigned.

Defense contractor involved with product development and manufacturing of various systems for military aerospace and vehicles in the Los Angeles International Airport area is searching for an experienced Painter I (2nd/Evening Shift). With a 50+ year foundation, The Marvin Group supports all branches of the Department of Defense and allies around the globe on an array of programs and platforms. We support many military prime contractors including Lockheed Martin, Northrop Grumman and Raytheon. RESPONSIBILITIES Coat surface of parts, assemblies, and finished products with protective or decorative materials such as primer, paint, enamel, lacquer using spray gun in accordance with part drawing specifications and engineering documentation. Mask, sand, and prepare components for paint application Comply with Paint shop standard practices. May monitor and verify quality in accordance with process specifications. Ability to match or detect differences in colors, including shades of color and brightness Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment and ensure components are protected (PTP) Ability to read, understand, and comply with OSHA / ITAR regulatory requirements Properly care for and maintain shop equipment and tools as assigned Ability to read and interpret blueprints and engineering documentation Able to pass Pulmonary Function Test to obtain respirator certification Ability to use tools, equipment, and materials in the aircraft painting process. Other duties as assigned SKILLS & REQUIREMENTS High school diploma 2 years experience as a painter (Aerospace preferred, but not required) (Automotive experience acceptable) Experience in masking components / parts Experience in sanding paint / primer / metals Experience painting metals required Experience painting aircraft parts desired Automated paint experience is a plus Ability to work overtime required based on business needs Primarily manufacturing/assembly environment Must be able to work in the following environmental conditions: noise, vibration, proximity to moving mechanical parts, moving vehicles, electrical current Must be able to bend and reach Must be able to communicate effectively Regularly lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds, occasionally assist others to lift and/or move up to 50 pounds Will be performing substantial movements (motions) of the wrists, hands, and/or fingers This position must meet export control compliance requirements. All applicants must be “U.S. persons” within the meaning of ITAR, as defined: a U.S. Citizen, a lawful permanent resident, political asylee, or refugee. Interested parties please apply online and submit resume to ********************************** Visit us at marvingroup.com The Marvin Group is an EEO/AA/Disability/Vets Employer. Our company uses E-Verify to confirm the employment eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit ********************* If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact Human Resources at ************.

Reports to: Department Supervisor Type: Full-Time Schedule: 2nd Shift (3:30pm-12am) To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. Must be able to mix and measure paint per specifications. Review work order and confirm mixed paint and part match, prior to painting in booth Clean parts as per specification Paint part according to specification and thickness Keep paint booth filters changed, booth FOD free and complete paperwork Post paint inspection of parts for appearance and proper coverage Able to paint effectively on different surfaces and metals Applies some advanced skills that allow employee to adapt and meet some complex or non-routine situations Observe safety regulations and wear protective masks and clothing during spray painting operations Complete the paint daily checklist Properly utilizes all PPE required under OSHA Guidelines Maintains all paint equipment Other duties as assigned SKILLS & ABILITIES Education: High School Graduate or General Education Degree (GED): Required Experience: 1 plus years of experience in Aircraft Painting Other Physical Requirements Vision (Near, Distance) Sense of Sound - Able to hear average conversations Sense of Touch Ability to wear Personal Protective Equipment (PPE) - Safety Glasses Standing for long periods of time Benefits: Compensation Range $18.36 - $24.67 (DOE) Medical, Dental, Vision, Employer Paid Basic Life, Supplemental Life Insurance, 401k with an Employer Match Generous Paid Time Off program 8 Holidays and 1 Floater Holiday Valence Surface Technologies is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Additionally, Valence Surface Technologies participates in the E-Verify program to ensure employment eligibility of newly hired employees. WORK ENVIRONMENT The majority of work is performed in a manufacturing setting. Work is performed in shop conditions and can be more than 100 degrees Fahrenheit. This position requires access to knowledge and technical data regulated by the International Traffic in Arms Regulations (ITAR). Valence Surface Technologies is required to verify that applicants meet ITAR requirements prior to employment for this role.

CertaPro Painters Responsibilities: Wearing the proper professional Painter attire; white pants or white shorts and a CertaPro Painters shirt. Keeping in regular communication with your Job Site Supervisor. This includes, but not limited to; know what jobs are next, what to do on days of inclement weather, etc. Maintaining all equipment. Dealing with or handling all reasonable requests from the customer. Take care of all reasonable requests from your supervisor. Attend all training sessions or company meetings as required. Make sure you and the Team you are working with follow safe working practices. Do good quality work and provide excellent service to all customers. Handle additional responsibilities as discussed. KEY DUTIES AND RESPONSIBILITIES:. Prepares, primes, sands, seals, patches and paints furniture, surfaces, buildings, and fixtures utilizing all types of painting materials. Tapes, flushes, repairs and applies texturing, acoustic layers on a variety of surfaces. Adjusts colors when necessary; utilizes enhanced finishing skills when appropriate. Operates, cleans and maintains all painting equipment, including brush, roll, sprayers and electrostatic sprayers, pumps, etc. Safely stores and labels all materials. Residential and Commercial Paint Projects Compensation: $20.00 - $24.00 per hour Opportunity is Knocking Qualities like working hard, getting the job done right, and fostering respect while working as part of a team are core to the CertaPro Painters brand culture. This makes each independently owned and operated CertaPro Painters franchise unique and fulfilling places to work. It is important to not only deliver memorable experiences for customers, but for team members of each independently owned and operated CertaPro Painters franchise, as well. CertaPro Painters - Our Values Deliver What You Promise. The promises made to CertaPro Painters customers is a first priority. ... Practice Continuous Improvement. ... Respect the Individual. ... Have Pride in What You Do. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to CertaPro Painters Corporate.

From Engine Bay to Payload, we protect vital structures and systems. Hera Technologies is a premier contract manufacturer specializing in high-precision metallic and non-metallic solutions for the Aerospace, Defense, Space, and Commercial Airline sectors. Our commitment to quality, innovation, and customer satisfaction has positioned us as an industry leader in the design, manufacturing and maintenance of thermal support systems. Our team is driven by excellence, integrity, and a passion for advancing aerospace technology. Take the next step in your career with a company committed to excellence, where your contributions are recognized, and your potential is realized.$21 - $24 an hour Essential Job Duties(which include, but not limited to):Read and comprehend written and verbal instructions, detailed blueprints and other similar authorized drawings and documents, and be capable of doing basic mathematical calculations.Proficiency in working with various paints, coatings, and finishes, including selection, application, and mixing.Operate painting or coating equipment.Knowledge of preparing various surfaces (e.g., metal, wood, plastic) for specialized painting applications.Clean surfaces of workpieces in preparation for coating, using cleaning fluids, solvents, brushes, scrapers, steam, sandpaper, or cloth.Ability to work with high precision and attention to detail to achieve specific finishes and effects.Apply coatings, such as paint, ink, or lacquer, to protect workpiece surfaces, using spray guns, pens, scrapers, or brushes.Monitoring and reviewing information from materials, weather events, humidity and temperature of the environment, to detect or assess problems.Examine finished surfaces of workpieces to verify conformance to specifications and retouch any defective areas.Read job orders and inspect workpieces to determine work procedures and materials required.Select and mix ingredients to prepare coating substances according to specifications, using paddles or mechanical mixers Ability to troubleshoot issues and find solutions for complex painting projects.Check for good edge margins and alignment.Handle and dispose of hazardous materials in approved manner.Understand and execute work orders in a timely and professional manner.Maintain clean, organized work areas and securely stores equipment and supplies.Inspect work for the highest quality.Maintain strict attention to detail when working at customer's property.Follows all safety policies and procedures.Ensures that required documentation is complete and in compliance with regulations and standards.Support 5-S and adhere to health, safety, and environmental company guidelines.Perform cross-functional operations.The above statements are intended to describe the general nature and level of work being performed by the individual(s) assigned to this position. Management reserves the right to modify, add, or remove duties and to assign other duties as necessary. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required. Minimum Requirements:High school diploma or equivalency certificate.Experience operating HVLP spray guns, including adjusting for proper paint flow to ensure high-quality finishes.Proficient in masking surfaces in preparation for painting to ensure clean, precise finishes. Preferred Requirements:Skilled in applying paint and coatings to aerospace hardware in accordance with industry standards.Experienced in measuring paint thickness to ensure compliance with specifications and quality standards Experience with specialized painting equipment, tools, and techniques (e.g., spray guns, airbrushes, automated painting systems). Experience with techniques like airbrushing, stenciling, custom finishes, or applying specific coatings (e.g., epoxy, powder coating). Work authorization: Must be authorized to work in the US.Must be willing to undergo a criminal background investigation and soft-inquiry credit check.Must be able to pass a pre-employment physical examination, including a drug and alcohol test. Work environment:Employee spends most of the day on their feet and must follow strict safety rules. They wear safety glasses to protect their eyes from airborne debris. Loud noise from machinery requires use of hearing protectors. They wear hard toe shoes or boots to protect their feet from potentially dropped objects.It is a professional work atmosphere, everyone from top managers to employees holds themselves accountable to their actions.It is a workplace environment where people are respectful, competent, and work together to meet their expectations.It is an open work culture in which no one feels excluded in whatever is going on within the workplace. People are not afraid to talk and are very supportive of each other.It is a rewarding working environment where managers make the effort to show gratitude to those who work hard. FLSA Classification: Hourly non-exempt Type: Full-time Work Hours: 2:00PM to 10:30PM Monday through FridayHourly Pay Range: $21 to 24 Reports to: Composites ManagerLocation: 100% onsite at 1055 E Francis St. Ontario, CA 91761 Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. The base salary is just one part of your total compensation package at Hera. You will also have access to a comprehensive set of benefits like: Company paid employee medical, dental and vision insurance Retirement plan participation (eligibility required) Paid Sick LeavePaid VacationPaid holidays Discretionary bonuses Physical Requirements / Work Environments· Ability to work in office, lab, and manufacturing environments with occasional exposure to noise, dust, and temperature variations· Must be able to lift and carry up to 35 lbs and perform tasks involving standing, walking, bending, and manual assembly· Visual acuity required for reading technical drawings and digital media· Valid US driver's license and ability to operate motor vehicles The above statements are intended to describe the general nature and level of work performed. They are not intended to be an exhaustive list of all responsibilities, duties, or skills required. Management may modify or assign additional duties as needed. EXPORT CONTROL REQUIREMENTS:To conform to US Government export regulations, the applicant must be a (i) US Citizen, (ii) lawful permanent resident of the U.S. (aka green card holder), (iii) protected individual as defined by U.S.C. 1324b(a)(3), or (iv) eligible to obtain the required authorizations from the U.S. Department of State. Hera Technologies is an Equal Opportunity Employer, employment with Hera Technologies is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Title: Shop Painter - Steel Manufacturing Department: Manufacturing / Production Reports To: Shop Supervisor Job Type: Full-Time Work Schedule: Monday-Thursday, 5:00 AM - 3:30 PM (4/10-hour shifts) Pay Range: $38,000 - $50,000 annually, DOE Job Summary We are a locally owned steel tank manufacturing company in Paso Robles, CA, hiring 1-2 full-time Shop Painters to support fabrication operations. This position is responsible for the preparation and application of industrial coatings to large steel tanks and components. The ideal candidate is experienced in working in a steel shop environment and understands the importance of quality, safety, and efficiency in surface preparation and paint application. Essential Duties and Responsibilities Abrasive blast steel surfaces using grit blasting equipment to remove mill scale, rust, and old coatings per specifications. Clean and prepare metal surfaces for painting using solvents, power tools, and hand tools. Apply primers, epoxy coatings, and industrial topcoats using airless and conventional spray equipment. Mask and protect surfaces not requiring coating using proper taping and sheeting techniques. Ensure coatings are applied to the required mil thickness, adhesion, and finish standards. Inspect surfaces and finishes to ensure quality control and compliance with job specifications. Maintain and clean all painting equipment, spray guns, hoses, and PPE. Mix and thin paint/coatings according to technical data sheets and job requirements. Operate forklifts or overhead cranes to maneuver parts into paint area (as needed and trained). Properly label and dispose of hazardous waste materials in compliance with safety and environmental policies. Keep paint booth, blast area, and paint prep stations clean and organized. Participate in respirator fit testing and wear required PPE, including full-face respirators, Tyvek suits, and gloves. Follow all company safety protocols and contribute to a safe working environment. Perform additional tasks and support shop team as assigned. Qualifications Required Skills and Abilities Experience in an industrial, steel fabrication, or heavy-duty manufacturing paint environment. Knowledge of surface prep and coating systems for steel products. Ability to read and follow technical data sheets and work orders. Strong attention to detail, safety-conscious, and reliable. Ability to work independently or as part of a team under tight deadlines. Education and Experience Prior industrial painting or blasting experience preferred. Experience using airless spray equipment highly desirable. Respirator fit test required upon hire and annually thereafter (employer-provided). Forklift or crane certification is a plus (training available if needed). Physical Requirements Must be able to stand for extended periods and perform repetitive motions. Must be able to lift, push, or pull up to 50 pounds regularly. Must be able to wear a respirator and pass fit testing (clean-shaven requirement). Capable of working in hot, noisy, or dusty environments while wearing protective gear. Must be able to distinguish between colors and coating finishes. Compensation and Benefits 401(k) Retirement Plan Medical, Dental, and Vision Insurance Life Insurance Paid Sick Leave and Holiday Pay Aflac Supplemental Insurance AAP/EEO Statement We are an Equal Opportunity Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, veteran status, or disability. Other Duties This job description is not intended to cover every duty or responsibility. Other duties may be assigned as needed to support the operations of the company.

The Engineering Painter 3 is responsible for the repair, maintenance, upkeep and replacement of the property's cosmetic materials (interior/exterior painting, patching of woodwork and furniture refinishing), in accordance with resort standards and will also assist in other areas of Engineering as assigned. Responsibilities Maintain complete knowledge of and comply with all departmental policies/services procedures/standards. Maintain complete knowledge of correct maintenance and use of equipment. Use equipment only as intended. Maintain positive guest relations at all times. Anticipate guests' needs, respond promptly and acknowledge all guest, however busy and whatever time of day Resolve guest complaints, ensuring guest satisfaction. Monitor and maintain cleanliness, sanitation and organize of assigned work areas. Receive daily work assignments from Paint Supervisor and review priorities and special projects. Organize materials, tools and equipment to perform daily assignments. Maintain time lines and work schedule in accordance with the preventive maintenance programs. Check work orders and “Night Report Log” for any problems. Make rounds checking these problem area; note any touch-up needs or/and safety concerns in the resort Supervise the work schedule in accordance with preventive maintenance program in rooms, coordinating with the Executive Housekeeper and Front Desk Office Manager. Supervise and maintain par stock levels of standard paint, brushes, wallpapers, stains, sign lettering and other supplies. Communicate requisition needs to Director of Engineering/ Operations Manager. Assist with selection, training, supervision, development, discipline and counseling of staff in accordance with departmental and company policies and procedures. Assist in utilization of on-line work order systems and distribute work flow in the most efficient manner. Maintain inventory of parts, supplies, tools, and materials for the department Support and assure compliance with all company and departmental policies and procedures. Support and assure compliance of all local, state, and federal regulations, Assist with the implementation of Destination Earth Policies and practices. Assist with the implementation of safety programs Attend staff meetings if/when requested. Perform any necessary repairs or maintenance as required or assigned. Execute Performance Evaluations for associates Perform Risk Management duties as assigned or required Conduct self as a resource for all departments of the resort Maintain a professional image at all times. Maintain cleanliness and integrity of mechanical areas, shops, tool carts and tools Perform special projects as assigned by the Paint Supervisor and the Chief Engineer Available for emergency contact. Available to work any shift as deemed necessary by the Paint Supervisor and the Chief Engineer Perform other duties and responsibilities as assigned or required Maintain cleanliness and organization of the work areas to include: Inventories Requisitions (receipt and storage) Trash Removal and clean up Ensure Security of any assigned keys and beeper. Initiate cost estimates of labor and material required for specific projects. Complete all paperwork and closing duties before leaving and review status of assignments and any follow-up actions with the Manager. Additional Duties & Responsibilities: Exert physical effort in transporting equipment (30lbs to 60lbs). Endure various physical movements throughout the work areas. Qualifications 1 years' experience as a commercial / residential painter Knowledge of at least 2 professions within the trade Working knowledge of different types of paint and their application Knowledge of stucco repair Knowledge of the use and application of wall covering (wallpaper, vinyl coverings, etc.) Knowledge of drywall and taping Knowledge of tile Assist with stain and finishes projects Knowledge of all tools and equipment respective to job functions. Ability to interpret manufacturer's literature for installations preparation, use and upkeep of various materials and products used throughout the property. Knowledge of proper chemical handling and disposal. Compensation: Base Pay Start Rate: $25/Hr. We offer a competitive benefit package for full-time, regular team members that includes: group medical, dental, vision, life, and disability benefits, as well as participation in a pre-tax flexible benefit plan for healthcare and dependent care reimbursement and an employee assistance program. We also offer paid time off/sick time and are proud to offer participation in a 401(k) plan with a company match!

Benefits: 401(k) 401(k) matching Dental insurance Health insurance Paid time off Vision insurance Wellness resources Summary The Painter is responsible for the day-to-day painting of the apartment community in accordance with company standards, policies and procedures. The Painter performs painting throughout the exterior and interior of the apartment community. The Painter, as with all company team members, is expected to conduct himself/herself in a professional manner that is consistent with the Business Ethics, Employee Conduct and Confidentiality policy outlined in the employee handbook. Duties Follows all safety procedures and regulations Performs paint service requests (work orders) for the apartment community and completes related paper work in a competent, professional and courteous manner. Performs scheduled full and partial paint of apartments, noting safety equipment used and regulation followed on vacant apartments and company policies and procedures. Performs scheduled preventative maintenance in accordance with the community's preventative maintenance program. Under the direction of the Maintenance Supervisor, organizes parts and materials required for paint service requests and plans paint work in advance to ensure efficient completion of all paint work. Assists in maintaining inventory by properly monitoring and recording inventory items. Maintains all storage facilities, equipment and the paint workshop in a neat and orderly working condition. Regularly provides information to the Property Management Staff regarding safety concerns and the general appearance of the community to ensure, high quality, safe living environment for the residents and marketability of the community. Retrieves and dispenses of any visible trash or garbage on the property in route to work assignments. Provides and maintains his/ her own hand tools customarily used in the industry and building trades. Performs other duties as assigned. Actual job duties and responsibilities may vary depending on the size of the community. Knowledge and Experience Knowledge of First Aid and Safety procedures. Previous building/apartment related painting experience. High School Diploma or equivalent. Skills and Abilities Perform all paint related tasks. Provide exceptional customer service. Manage projects through planning, organizing, and coordinating tasks. Operate hand tools. Effective oral and written communication skills. Work EnvironmentThe Painter works on-site at an apartment community and interfaces with external/internal customers, residents, and vendors on a regular basis. The position work schedule varies depending on the property. Hours are usually scheduled from 8 a.m. - 5 p.m. and may be scheduled to work weekend days (Sat/Sun). Must be available to work over-time as needed. The Painter should be flexible with availability depending on the needs of the property. Physical Requirements The Painter physical condition must be sufficient for the consistent and successful completion of the specific responsibilities defined for this position and for his/her performance to be in complete conformance with all professional standards defined for this position. While performing the duties of this job, the employee is frequently required to stand, walk, sit, use hands, reach with hands and arms, stoop, kneel, crouch, or crawl, talk, and hear. May be required to lift and/or move up to 50 pounds and operate power tools. Must be able to occasionally drive during the course of work. Compensation: $18.00 - $19.00 per hour Camber Corporation is a nationwide, full-service, real estate asset management company that offers a wide range of real estate consulting and management. The Camber team manages assets including multi-family units, retail centers, office complexes, self-storage, and hospitality businesses. Purpose Enriching lives by crafting exceptional environments and experiences. Niche We design, build and care for unique settings where communities thrive and memorable experiences come to life.

Responsible for property renovations including the installation and repair of drywall, metal studs, doors and frames, wall protection, painting and skim coating and other duties as assigned. ESSENTIAL FUNCTIONS Removes fixtures from surface areas prior to painting. Remove old finishes by stripping, sanding, wire brushing, burning, or using water and/or abrasive blasting. Prepare surfaces, using sandpaper, brushes, or steel wool Fills nail holes, cracks, and joints with caulk, putty, plaster, or other filler, using caulking gun and putty knife. Apply paint, stain and other finishes to property walls, ceilings, and furniture using brushes, spray guns, or rollers. Selects premixed paints appropriate for surface area. Apply primers or sealers to prepare new surfaces for finish coats. Cover surfaces with appropriate material for protection during painting and post appropriate paint signs. Clean up and store paint and painting tools and equipment in appropriate areas. Coordinate with vendor in order to modify colors of paint, stain, or varnish. Erects scaffolding or sets up ladders to perform tasks above ground level. Install and repair covered wall and ceiling surfaces including, but not limited to, hanging vinyl paper, fabric and foil wall coverings Manage related supply inventory Other: Regular attendance in conformance with the standards, which may be established from time to time, is essential to the successful performance of this position. Employees with irregular attendance will be subject to disciplinary action, up to and including termination of employment. Due to the cyclical nature of the hospitality industry, employees may be required to work varying schedules to reflect the business needs of the hotel. In addition, attendance at all scheduled training sessions and meetings is required. Upon employment, all employees are required to fully comply with Westin/Sheraton Carlsbad Resort & Spa rules and regulations for the safe and effective operation of the hotel's facilities. Employees who violate hotel rules and regulations will be subject to disciplinary action, up to and including termination of employment. SUPPORTIVE FUNCTIONS In addition to performance of the essential functions, this position may be required to perform a combination of the following supportive functions, with the percentage of time performing each function to be solely determined by the manager based upon the particular requirements of the hotel: Follow all company and safety and security policies and procedure. Report maintenance problems, safety hazards, accidents, or injuries. Complete safety training and certifications. Ensure uniform and personal appearance is clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests' service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Speak with others using clear and professional language. Support team to reach common goals. Ensure adherence to quality expectations and standards. Perform other reasonable job duties as requested by Supervisors. SPECIFIC JOB KNOWLEDGE, SKILLS AND ABILITIES The individual must possess the following knowledge, skills and abilities and be able to explain and demonstrate that he or she can perform the essential functions of the job, with or without reasonable accommodation, using some other combination of knowledge, skills, and abilities: Must be knowledgeable with construction containment and infection control measures, ladders, scaffolding, heights, power tools and equipment. Must be able to use tools, equipment, materials and chemicals safely and efficiently according to manufacturer's instructions/SDS requirements. Must have general mechanical, mathematical, and carpentry skills. Must be able to work around other departments' schedules, may need to report to work early and/or work late and/or work weekends. Must work well without supervision Must be able to complete take-offs in a timely and accurate manner. Must be detail oriented, excellent communicator and highly organized. Must be able to manage materials efficiently. Have materials on site on time, maintain and turn in receipts, and work with the project manager to ensure that the project stays on or under budget. Work with a sense of pride and professionalism in the office and on the job site with the client and the crews. Physical Demands Most work tasks are performed indoors. Temperature is moderate and controlled by hotel environmental systems; however, must be able to work in extreme temperatures like freezers (-10F) and kitchens (+110F), possibly for one hour or more. Must be able to stand and exert well-paced mobility for up to 4 hours in length. Must be able to exert well-paced ability in limited space and to reach other locations of the hotel on a timely basis. Must be able to bend, stoop, squat and stretch to fulfill painting and maintenance tasks. Must have the ability to bend, squat, and frequently lift 50 lbs. The worker is subject to hazards: includes a variety of physical conditions, such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. The worker is subject to atmospheric conditions, one or more of the following conditions that affect the respiratory system or the skin: fumes, odors, dusts, mists, gases or poor ventilation. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move up and down a ladder. The worker is subject to oils; there is air and/or skin exposure to oils and other cutting fluids. Requires grasping, writing, standing, sitting, walking, repetitive motions, bending, climbing, listening and hearing ability and visual acuity. Talking and hearing occur continuously in the process of communicating with guests, supervisors and other employees. Vision occurs continuously with the most common visual functions being those of near and color vision and depth perception. Requires manual dexterity to use and operate all necessary equipment. Must have finger dexterity to be able to operate office equipment such as computers, printers, 10-key adding machine, electric typewriter, multi-line touch tone phone, filing cabinets, FAX machines, photocopiers, dolly and other office equipment as needed. Qualifications QUALIFICATION STANDARDS Education High school or equivalent preferred. Experience A minimum of two years trade background in painting required Previous painting experience in commercial renovations or builds preferred Licenses or Certificates The Company's Driver's Insurance requirements must be met, including: I. In order for a driver to be approved, the following criteria must be met: Maximum of 1 moving violation in the last three years in combination with one at fault accident. Maximum of 2 moving violations in the last 3 years with no at fault accidents. Maximum of 2 at fault accidents in the last 3 years with no moving violations. No speeding over 80 miles per hour. All drivers must be licensed for at least 3 years. II. Any driver with any of the following in the last 5 years is unacceptable: Conviction for an alcohol and/or drug related driving offense Refusal to submit to a Blood Alcohol Content (BAC) Test Failure to stop/report an accident and leaving the scene of an accident as defined by State laws Conviction for homicide, manslaughter, or assault arising out of the use of a vehicle Suspension, revocation, or administrative restriction of driver's license within the last three years Conviction for reckless or careless driving Racing Passing a stopped school bus Possession of a controlled substance Making a false accident report Three or more “Company Vehicle” physical damage claims in any twelve month period Speeding (10+MPH over posted speed limit) Conviction for attempting to elude a police officer. III. As respects to Drivers under 25 years old, the following guidelines apply: No drivers under 21 years' old Drivers between the ages of 21 and 25 will be considered so long as: No driving of 15 passenger vans. Clean MVR Valid Driver's License in effect for at least 3 years. Grooming All employees must maintain a neat, clean and well-groomed appearance per Westin/Sheraton Carlsbad's standards. Attendance: Regular attendance in conformance with the standards, which may be established by Westin/Sheraton Carlsbad Resort & Spa from time to time, is essential to the successful performance of this position. Employees with irregular attendance / tardies will be subject to disciplinary action, up to and including termination of employment. Upon employment, all employees are required to fully comply with Westin/Sheraton Carlsbad Resort & Spa rules and regulations will be subject to disciplinary action, up to and including termination of employment. This job description is not an exclusive or exhaustive list of all job functions that an employee in this position may be asked to perform from time to time. Ownership: This job opportunity for employment is being made available by Grand Pacific Hotel Services, L.P. , the owner and the employer of all associates working at Westin/Sheraton Carlsbad Resort & Spa. Marriott International is not the owner or operator of Westin/Sheraton Carlsbad Resort & Spa. Marriott International is not the direct or indirect employer or joint employer of any associates working at Westin/Sheraton Carlsbad Resort & Spa. Marriott International does not control, govern or regulate any aspect of recruitment or employment at Westin/Sheraton Carlsbad Resort & Spa. Marriott International is not responsible for any aspect of your application, candidacy, or employment at the resort, nor shall Marriott International be liable for the data collection, use and privacy practices of the Westin/Sheraton Carlsbad Resort & Spa's owner or operator.

This position will be responsible for painting the interior of the hospital. Will be required to operate paint brushes, rollers, mixers, spray equipment, plaster and patching trowels, sanders, ladders, tile cutters, etc. This position requires the full understanding and active participation in fulfilling the mission of AHMC Anaheim Regional Medical Center. It is expected that the employee demonstrate behavior consistent with the core values of AHMC Anaheim Regional Medical Center. The employee shall support AHMC Anaheim Regional Medical Center's strategic plan and goals and direction of the performance improvement plan. The employee will also be expected to support all organizational expectations including, but not limited to; Customer Service, Patient's Rights, Confidentiality of Information, Environment of Care and Regional Care initiatives. Responsibilities Provides a safe and sanitary environment for patients, family, staff, and self. Ability to properly use hand tools - paint brushes, rollers, mixers, spray equipment, plaster & patching trowels, sanders, ladders, tile cutters, etc. Performs proper preparation of surfaces to be painted, tiled, or new floor installation. Performs proper techniques on painting surfaces, equipment, and flooring. Work performance is free of any paint drips, sagging, and runs on final projects. All project areas are clean of old drippings and scraped off surfaces to present as acceptable. Maintains paint inventory of various department colors. Ability to properly use patching materials for walls, adhesive materials for flooring and thinset grout material for tile. Properly dispose of waste and cleans area before end of shift. Cleans tools in designated area. Maintains supply stock and organizes paint storage area. Ability to prep wall prior to installation of wallpaper by applying wallpaper adhesive and utilizing utility knife for cutting wallpaper. Qualifications Education/Training/Experience High school graduate or equivalent related experience preferred Must have minimum of one year's experience in painting. Knowledge of different types of paint. (Latex, oil and enamel, stains, primers, patching compounds.) Working knowledge in various mechanical hand held tools required in the performance of the trade. Working knowledge of scaffolding and ladders. Ability to read, write, comprehend and communicate effectively Previous experience within the healthcare industry preferred Basic computer skills preferred Ability to interact effectively with patients, customers and associates in a way that exhibits superior integrated customer service and teamwork Excellent listening and verbal communication skills Ability to exercise tact and diplomacy while directing co-workers Ability to perform and prioritize multiple tasks effectively and efficiently Excellent organization and problem solving skills Ability to work within defined time constraints Ability to take initiative and follow through Bilingual in Spanish a plus

Responsible for property renovations including the installation and repair of drywall, metal studs, doors and frames, wall protection, painting and skim coating and other duties as assigned. ESSENTIAL FUNCTIONS * Removes fixtures from surface areas prior to painting. * Remove old finishes by stripping, sanding, wire brushing, burning, or using water and/or abrasive blasting. * Prepare surfaces, using sandpaper, brushes, or steel wool * Fills nail holes, cracks, and joints with caulk, putty, plaster, or other filler, using caulking gun and putty knife. * Apply paint, stain and other finishes to property walls, ceilings, and furniture using brushes, spray guns, or rollers. * Selects premixed paints appropriate for surface area. * Apply primers or sealers to prepare new surfaces for finish coats. * Cover surfaces with appropriate material for protection during painting and post appropriate paint signs. * Clean up and store paint and painting tools and equipment in appropriate areas. * Coordinate with vendor in order to modify colors of paint, stain, or varnish. * Erects scaffolding or sets up ladders to perform tasks above ground level. * Install and repair covered wall and ceiling surfaces including, but not limited to, hanging vinyl paper, fabric and foil wall coverings * Manage related supply inventory Other: Regular attendance in conformance with the standards, which may be established from time to time, is essential to the successful performance of this position. Employees with irregular attendance will be subject to disciplinary action, up to and including termination of employment. Due to the cyclical nature of the hospitality industry, employees may be required to work varying schedules to reflect the business needs of the hotel. In addition, attendance at all scheduled training sessions and meetings is required. Upon employment, all employees are required to fully comply with Westin/Sheraton Carlsbad Resort & Spa rules and regulations for the safe and effective operation of the hotel's facilities. Employees who violate hotel rules and regulations will be subject to disciplinary action, up to and including termination of employment. SUPPORTIVE FUNCTIONS In addition to performance of the essential functions, this position may be required to perform a combination of the following supportive functions, with the percentage of time performing each function to be solely determined by the manager based upon the particular requirements of the hotel: * Follow all company and safety and security policies and procedure. * Report maintenance problems, safety hazards, accidents, or injuries. * Complete safety training and certifications. * Ensure uniform and personal appearance is clean and professional, maintain confidentiality of proprietary information, and protect company assets. * Welcome and acknowledge all guests according to company standards, anticipate and address guests' service needs, assist individuals with disabilities, and thank guests with genuine appreciation. * Speak with others using clear and professional language. * Support team to reach common goals. * Ensure adherence to quality expectations and standards. * Perform other reasonable job duties as requested by Supervisors. SPECIFIC JOB KNOWLEDGE, SKILLS AND ABILITIES The individual must possess the following knowledge, skills and abilities and be able to explain and demonstrate that he or she can perform the essential functions of the job, with or without reasonable accommodation, using some other combination of knowledge, skills, and abilities: * Must be knowledgeable with construction containment and infection control measures, ladders, scaffolding, heights, power tools and equipment. * Must be able to use tools, equipment, materials and chemicals safely and efficiently according to manufacturer's instructions/SDS requirements. * Must have general mechanical, mathematical, and carpentry skills. * Must be able to work around other departments' schedules, may need to report to work early and/or work late and/or work weekends. * Must work well without supervision * Must be able to complete take-offs in a timely and accurate manner. * Must be detail oriented, excellent communicator and highly organized. * Must be able to manage materials efficiently. Have materials on site on time, maintain and turn in receipts, and work with the project manager to ensure that the project stays on or under budget. * Work with a sense of pride and professionalism in the office and on the job site with the client and the crews. Physical Demands * Most work tasks are performed indoors. Temperature is moderate and controlled by hotel environmental systems; however, must be able to work in extreme temperatures like freezers (-10F) and kitchens (+110F), possibly for one hour or more. * Must be able to stand and exert well-paced mobility for up to 4 hours in length. * Must be able to exert well-paced ability in limited space and to reach other locations of the hotel on a timely basis. * Must be able to bend, stoop, squat and stretch to fulfill painting and maintenance tasks. * Must have the ability to bend, squat, and frequently lift 50 lbs. * The worker is subject to hazards: includes a variety of physical conditions, such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. * The worker is subject to atmospheric conditions, one or more of the following conditions that affect the respiratory system or the skin: fumes, odors, dusts, mists, gases or poor ventilation. * Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Move up and down a ladder. * The worker is subject to oils; there is air and/or skin exposure to oils and other cutting fluids. * Requires grasping, writing, standing, sitting, walking, repetitive motions, bending, climbing, listening and hearing ability and visual acuity. * Talking and hearing occur continuously in the process of communicating with guests, supervisors and other employees. * Vision occurs continuously with the most common visual functions being those of near and color vision and depth perception. * Requires manual dexterity to use and operate all necessary equipment. * Must have finger dexterity to be able to operate office equipment such as computers, printers, 10-key adding machine, electric typewriter, multi-line touch tone phone, filing cabinets, FAX machines, photocopiers, dolly and other office equipment as needed.

Painter Pay Range: $24.00 to $32.00 per hour (wage based on experience and qualifications) Schedule: Monday-Thursday 7:00 am to 3:30 pm; Friday 6:00 am to 2:30 pm. Performs a variety of skilled painting activities, and may perform other maintenance-related duties as needed. This is a temporary seasonal position not to exceed 122 days that will be scheduled full-time hours. Essential Functions: * Scrapes, sands, and fills surfaces in preparation for painting and finishing. * Applies base coats and finish coats with brush or sprayers. * Matches paints and finishes, cleans, and maintains brushes and other equipment. * Prepares simple designs, and orders and stores painting materials. * Maintains simple records and prepares reports. * Consults with other skilled trades' people as needed. * Instructs and leads unskilled assistants. * Presents estimated time and materials required for each project to supervisor for approval. * May assist in unskilled general maintenance and repair activities, including plumbing, electrical and landscaping duties as needed. This description in no way implies that these are the only duties to be performed by the employee occupying this position. Qualifications: * Must be at least 18 years of age. * 3+ years of experience as a painter. * Must be familiar with common safety rules and practices. * Ability to work outside the normal business day/week as demanded by events and programs. * Must be available to work 5 days per week, on any shift (days, swing, graveyard) between mid-July and mid-August. Physical Demands: * The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee is frequently required to walk, stand, talk and hear. The employee must frequently use hands and fingers to operate, handle, or feel objects, tools, or controls; and reach with hands and arms. * The employee must occasionally lift and/or move up to 50 pounds, using proper bending and lifting. Specific vision abilities required by this job include close vision and the ability to adjust focus. * Must be able to walk and stand for extended periods of time. Work Environment: * Will work in a fast-paced, indoor and outdoor environment in all types of weather. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * The noise level in the work environment is usually moderately loud, however louder noise levels may be experienced during outdoor events and when in larger event buildings. * The duties listed above are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related, or a logical assignment to the position. * The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. Will be required to perform other duties as directed, requested or assigned.

Defense contractor involved with product development and manufacturing of various systems for military aerospace and vehicles in the Los Angeles International Airport area is searching for an experienced Painter I (2nd/Evening Shift). With a 50+ year foundation, The Marvin Group supports all branches of the Department of Defense and allies around the globe on an array of programs and platforms. We support many military prime contractors including Lockheed Martin, Northrop Grumman and Raytheon. RESPONSIBILITIES Coat surface of parts, assemblies, and finished products with protective or decorative materials such as primer, paint, enamel, lacquer using spray gun in accordance with part drawing specifications and engineering documentation. Mask, sand, and prepare components for paint application Comply with Paint shop standard practices. May monitor and verify quality in accordance with process specifications. Ability to match or detect differences in colors, including shades of color and brightness Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment and ensure components are protected (PTP) Ability to read, understand, and comply with OSHA / ITAR regulatory requirements Properly care for and maintain shop equipment and tools as assigned Ability to read and interpret blueprints and engineering documentation Able to pass Pulmonary Function Test to obtain respirator certification Ability to use tools, equipment, and materials in the aircraft painting process. Other duties as assigned SKILLS & REQUIREMENTS High school diploma 2 years experience as a painter (Aerospace preferred, but not required) (Automotive experience acceptable) Experience in masking components / parts Experience in sanding paint / primer / metals Experience painting metals required Experience painting aircraft parts desired Automated paint experience is a plus Ability to work overtime required based on business needs Primarily manufacturing/assembly environment Must be able to work in the following environmental conditions: noise, vibration, proximity to moving mechanical parts, moving vehicles, electrical current Must be able to bend and reach Must be able to communicate effectively Regularly lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds, occasionally assist others to lift and/or move up to 50 pounds Will be performing substantial movements (motions) of the wrists, hands, and/or fingers This position must meet export control compliance requirements. All applicants must be “U.S. persons” within the meaning of ITAR, as defined: a U.S. Citizen, a lawful permanent resident, political asylee, or refugee. Interested parties please apply online and submit resume to ********************************** Visit us at marvingroup.com The Marvin Group is an EEO/AA/Disability/Vets Employer. Our company uses E-Verify to confirm the employment eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit ********************* If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact Human Resources at ************.

Job DescriptionFrom Engine Bay to Payload, we protect vital structures and systems. Hera Technologies is a premier contract manufacturer specializing in high-precision metallic and non-metallic solutions for the Aerospace, Defense, Space, and Commercial Airline sectors. Our commitment to quality, innovation, and customer satisfaction has positioned us as an industry leader in the design, manufacturing and maintenance of thermal support systems. Our team is driven by excellence, integrity, and a passion for advancing aerospace technology. Take the next step in your career with a company committed to excellence, where your contributions are recognized, and your potential is realized. Essential Job Duties(which include, but not limited to):Read and comprehend written and verbal instructions, detailed blueprints and other similar authorized drawings and documents, and be capable of doing basic mathematical calculations.Proficiency in working with various paints, coatings, and finishes, including selection, application, and mixing.Operate painting or coating equipment.Knowledge of preparing various surfaces (e.g., metal, wood, plastic) for specialized painting applications.Clean surfaces of workpieces in preparation for coating, using cleaning fluids, solvents, brushes, scrapers, steam, sandpaper, or cloth.Ability to work with high precision and attention to detail to achieve specific finishes and effects.Apply coatings, such as paint, ink, or lacquer, to protect workpiece surfaces, using spray guns, pens, scrapers, or brushes.Monitoring and reviewing information from materials, weather events, humidity and temperature of the environment, to detect or assess problems.Examine finished surfaces of workpieces to verify conformance to specifications and retouch any defective areas.Read job orders and inspect workpieces to determine work procedures and materials required.Select and mix ingredients to prepare coating substances according to specifications, using paddles or mechanical mixers Ability to troubleshoot issues and find solutions for complex painting projects.Check for good edge margins and alignment.Handle and dispose of hazardous materials in approved manner.Understand and execute work orders in a timely and professional manner.Maintain clean, organized work areas and securely stores equipment and supplies.Inspect work for the highest quality.Maintain strict attention to detail when working at customer's property.Follows all safety policies and procedures.Ensures that required documentation is complete and in compliance with regulations and standards.Support 5-S and adhere to health, safety, and environmental company guidelines.Perform cross-functional operations.The above statements are intended to describe the general nature and level of work being performed by the individual(s) assigned to this position. Management reserves the right to modify, add, or remove duties and to assign other duties as necessary. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required. Minimum Requirements:High school diploma or equivalency certificate.Experience operating HVLP spray guns, including adjusting for proper paint flow to ensure high-quality finishes.Proficient in masking surfaces in preparation for painting to ensure clean, precise finishes. Preferred Requirements:Skilled in applying paint and coatings to aerospace hardware in accordance with industry standards.Experienced in measuring paint thickness to ensure compliance with specifications and quality standards Experience with specialized painting equipment, tools, and techniques (e.g., spray guns, airbrushes, automated painting systems). Experience with techniques like airbrushing, stenciling, custom finishes, or applying specific coatings (e.g., epoxy, powder coating). Work authorization: Must be authorized to work in the US.Must be willing to undergo a criminal background investigation and soft-inquiry credit check.Must be able to pass a pre-employment physical examination, including a drug and alcohol test. Work environment:Employee spends most of the day on their feet and must follow strict safety rules. They wear safety glasses to protect their eyes from airborne debris. Loud noise from machinery requires use of hearing protectors. They wear hard toe shoes or boots to protect their feet from potentially dropped objects.It is a professional work atmosphere, everyone from top managers to employees holds themselves accountable to their actions.It is a workplace environment where people are respectful, competent, and work together to meet their expectations.It is an open work culture in which no one feels excluded in whatever is going on within the workplace. People are not afraid to talk and are very supportive of each other.It is a rewarding working environment where managers make the effort to show gratitude to those who work hard. FLSA Classification: Hourly non-exempt Type: Full-time Work Hours: 2:00PM to 10:30PM Monday through FridayHourly Pay Range: $21 to 24 Reports to: Composites ManagerLocation: 100% onsite at 1055 E Francis St. Ontario, CA 91761 Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. The base salary is just one part of your total compensation package at Hera. You will also have access to a comprehensive set of benefits like: Company paid employee medical, dental and vision insurance Retirement plan participation (eligibility required) Paid Sick LeavePaid VacationPaid holidays Discretionary bonuses Physical Requirements / Work Environments· Ability to work in office, lab, and manufacturing environments with occasional exposure to noise, dust, and temperature variations· Must be able to lift and carry up to 35 lbs and perform tasks involving standing, walking, bending, and manual assembly· Visual acuity required for reading technical drawings and digital media· Valid US driver's license and ability to operate motor vehicles The above statements are intended to describe the general nature and level of work performed. They are not intended to be an exhaustive list of all responsibilities, duties, or skills required. Management may modify or assign additional duties as needed. EXPORT CONTROL REQUIREMENTS:To conform to US Government export regulations, the applicant must be a (i) US Citizen, (ii) lawful permanent resident of the U.S. (aka green card holder), (iii) protected individual as defined by U.S.C. 1324b(a)(3), or (iv) eligible to obtain the required authorizations from the U.S. Department of State. Hera Technologies is an Equal Opportunity Employer, employment with Hera Technologies is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

CertaPro Painters is looking for experienced painters to start painting right away! Get more local work now! If you are looking for immediate work painting homes and commercial buildings, we want to hear from you. Our painters are experienced, have high attention to detail and a passion for painting. We treat our painters and crews like family and offer a busy schedule with quick, on-time pay. General Job Responsibilities and Required Skills Complete projects according to work orders in a timely and professional fashion Previous professional painting experience preferred Ability to handle physical workload Deadline and detail-oriented Customer service oriented, you like getting a job done right Requirements High school diploma or GED preferred Minimum of three years of painting experience verifiable through references Each CertaPro Painters business is independently owned and operated. Compensation: $18.00 - $30.00 per hour Opportunity is Knocking Qualities like working hard, getting the job done right, and fostering respect while working as part of a team are core to the CertaPro Painters brand culture. This makes each independently owned and operated CertaPro Painters franchise unique and fulfilling places to work. It is important to not only deliver memorable experiences for customers, but for team members of each independently owned and operated CertaPro Painters franchise, as well. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to CertaPro Painters Corporate.

Job Status: Onsite, Full-Time Pay Range: $18.00 - $25.00 per hour (DOE) Painter is responsible for performing all phases of surface preparation and painting on aircraft parts. This includes interpreting job specifications, mixing paints, preparing surfaces, and applying coatings in accordance with technical documentation and quality standards. To perform this job successfully, an individual must be able to execute each essential duty satisfactorily, with or without reasonable accommodation. Accommodations may be made to support qualified individuals with disabilities. Inspect parts to determine painting requirements based on shop paperwork Select and verify appropriate paint per job specifications Mix paint in accordance with Technical Data Sheets or manufacturer's instructions Prepare surfaces, including minor sanding and cleaning Apply coatings such as epoxy, lacquer, resin, and final color coats Paint a variety of surfaces and metals using proper techniques Replace paint booth filters contaminated with chromate or solvents Adhere to safety protocols, including use of PPE and respirators Coordinate tasks with team members to ensure workflow efficiency Complete assigned tasks within designated time frames Perform other duties as assigned Required Experience & Skills: Experience: Minimum of 5 years' experience in aircraft painting or aerospace surface processing Skills & Competencies: Accountability Accuracy and attention to detail Applied learning and continuous improvement Strong oral communication Customer-focused attitude Enthusiastic and motivated Ethical conduct and integrity Goal-oriented mindset Initiative and sound judgment Reliable and responsible Physical & Sensory Requirements: Near, peripheral, color, and depth vision Ability to hear typical conversations Sense of smell and touch Ability to wear all required Personal Protective Equipment (PPE), including respirators and protective clothing

This position will be responsible for painting the interior of the hospital. Will be required to operate paint brushes, rollers, mixers, spray equipment, plaster and patching trowels, sanders, ladders, tile cutters, etc. This position requires the full understanding and active participation in fulfilling the mission of AHMC Anaheim Regional Medical Center. It is expected that the employee demonstrate behavior consistent with the core values of AHMC Anaheim Regional Medical Center. The employee shall support AHMC Anaheim Regional Medical Center's strategic plan and goals and direction of the performance improvement plan. The employee will also be expected to support all organizational expectations including, but not limited to; Customer Service, Patient's Rights, Confidentiality of Information, Environment of Care and Regional Care initiatives. Responsibilities Provides a safe and sanitary environment for patients, family, staff, and self. Ability to properly use hand tools - paint brushes, rollers, mixers, spray equipment, plaster & patching trowels, sanders, ladders, tile cutters, etc. Performs proper preparation of surfaces to be painted, tiled, or new floor installation. Performs proper techniques on painting surfaces, equipment, and flooring. Work performance is free of any paint drips, sagging, and runs on final projects. All project areas are clean of old drippings and scraped off surfaces to present as acceptable. Maintains paint inventory of various department colors. Ability to properly use patching materials for walls, adhesive materials for flooring and thinset grout material for tile. Properly dispose of waste and cleans area before end of shift. Cleans tools in designated area. Maintains supply stock and organizes paint storage area. Ability to prep wall prior to installation of wallpaper by applying wallpaper adhesive and utilizing utility knife for cutting wallpaper. Qualifications Education/Training/Experience * High school graduate or equivalent related experience preferred * Must have minimum of one year's experience in painting. * Knowledge of different types of paint. (Latex, oil and enamel, stains, primers, patching compounds.) * Working knowledge in various mechanical hand held tools required in the performance of the trade. * Working knowledge of scaffolding and ladders. * Ability to read, write, comprehend and communicate effectively * Previous experience within the healthcare industry preferred * Basic computer skills preferred * Ability to interact effectively with patients, customers and associates in a way that exhibits superior integrated customer service and teamwork * Excellent listening and verbal communication skills * Ability to exercise tact and diplomacy while directing co-workers * Ability to perform and prioritize multiple tasks effectively and efficiently * Excellent organization and problem solving skills * Ability to work within defined time constraints * Ability to take initiative and follow through * Bilingual in Spanish a plus