Painter jobs in Mission Viejo, CA

**Automotive Painter ** **Job Title: Painter** + 1st shift Monday - Friday 6:00 am - 2:30 pm + OT + Full benefits - Medical, dental, vision + Upward mobility (promotions/regular pay raises) + Automotive painting + $28-$30/hr (depending on experience) **Job Description:** We are seeking an experienced painter with over four years of experience in automotive painting. The ideal candidate will be skilled in sealing seams, preparing units, and performing tasks such as sanding, polishing, and scuffing areas on vehicles to address paint defects. Additional duties include masking, taping for paint preparation, and performing light bodywork. Bilingual Spanish speakers are preferred. Responsibilities: + Seal all seams and prepare products for painting. + Sand, polish, and scuff vehicle areas to correct paint defects. + Mask and tape vehicles for paint preparation. + Perform light bodywork as needed. + Utilize experience in automotive painting to ensure quality results. Essential Skills: + Minimum of four years of experience in automotive painting. + Proficiency in sealing seams and preparing products for painting. + Ability to sand, polish, and scuff areas to address paint defects. + Experience in masking and taping for paint preparation. + Capability to perform light bodywork. + Bilingual in Spanish is preferred. Additional Skills & Qualifications: + Experience in automotive painting specifically. + Preferred bilingual ability in Spanish for communication with diverse teams. Please reply with your resume and contact **Dominick directly at ************** to discuss the position. Thank you! **Job Type & Location** This is a Contract to Hire position based out of South El Monte, CA. **Pay and Benefits** The pay range for this position is $27.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in South El Monte,CA. **Application Deadline** This position is anticipated to close on Dec 21, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Description CertaPro Painters Responsibilities: Wearing the proper professional Painter attire; white pants or white shorts and a CertaPro Painters shirt. Keeping in regular communication with your Job Site Supervisor. This includes, but not limited to; know what jobs are next, what to do on days of inclement weather, etc. Maintaining all equipment. Dealing with or handling all reasonable requests from the customer. Take care of all reasonable requests from your supervisor. Attend all training sessions or company meetings as required. Make sure you and the Team you are working with follow safe working practices. Do good quality work and provide excellent service to all customers. Handle additional responsibilities as discussed. KEY DUTIES AND RESPONSIBILITIES:. Prepares, primes, sands, seals, patches and paints furniture, surfaces, buildings, and fixtures utilizing all types of painting materials. Tapes, flushes, repairs and applies texturing, acoustic layers on a variety of surfaces. Adjusts colors when necessary; utilizes enhanced finishing skills when appropriate. Operates, cleans and maintains all painting equipment, including brush, roll, sprayers and electrostatic sprayers, pumps, etc. Safely stores and labels all materials. Residential and Commercial Paint Projects

Under the direction of the department Supervisor/Manager, the Painter is responsible for coating surface parts, assembling and finishing products with protective or decorative materials such as paint, varnish, enamel, lacquer, dope or stain using spray gun. ESSENTIAL DUTIES & RESPONSIBILITIES: • Determines and selects correct mixes of coating material. • Applies paint to parts as directed by job orders. • Identifies and coats areas that are inaccessible to hand sprayer. • Identifies problems with equipment and will troubleshoot or repair paint guns. • Responsible for running ovens as needed. • Will complete visual inspection of masking on parts to ensure consistency as well as inspect for damaged product. • Completes necessary paperwork. • Works closely with the production team and assist as needed. • Adheres to safety regulations. • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Ability to communicate, read, and understand English. • Basic math skills. • Experience using and troubleshooting gravity spray gun. • Previous experience in aerospace industry or automotive repair, a plus. • Ability to effectively communicate both verbally and in writing with team members at all levels in the organization. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Walking/Standing for prolonged periods of time • Ability to lift up to 30 lbs • Exposed heat, noise and chemical fumes while in production areas • Good hand and eye coordination and movement We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws.

Sunset Signs has been rapidly growing over the last 10 years and is now one of the premier signage contractors in California. We are looking to expand our team with knowledgeable and talented people. We boast a great working environment, good work/life balance, and a family atmotsphere. Summary The painter will be responsible for the day to day painting of products and parts. Our production team members are responsible for learning approved fabrication methods and techniques to ensure the highest quality production possible, while meeting daily schedules and goals. The Production Team Member's responsibilities also include keeping the production area clean, preparing machinery and equipment for use, working the production line as instructed, and strictly following health and safety guidelines. Essential Duties and Responsibilities · Paint small and large signs and products with highest quality possible · Meet quality standards · Preform work in accordance with scheduled daily activities · Monitor manufacturing equipment and safety procedures and notify management of issues Required Skills · Must have a minimum of 3 years experience spraying automotive style paint. · Attention to detail · Able to work as part of a team. · Good communication skills. · Basic math skills. · Physical dexterity. · Available for shift work. · Ability to lift up to 50 lbs. · Ability to stand up to 100% of the assigned shift Education / Experience To be considered for this position you must have: · High School Degree or GED or relevant experience · Sign industry experience not required but is a plus Employment Details · Reports to: Production Manager & Production Department Lead · Status: Hourly · Compensation: Depends on Experience · Hours: Monday - Friday from 6AM-2:45PM. · Benefits (after 90 days): Medical, Dental, Vision (cost for benefits may apply) Holiday Pay (6 paid holidays/year minimum) PTO (1 week min/year with increments at 3 years and 5 years) Retirement Account Match up to 4%

Covering trim, floors, furniture and other surfaces with masking tape, drop cloths and other protective coverings to keep them free of paint. Removing old finish using scrapers, chemical compounds or blowtorches. Cleaning machines, equipment and work areas using water, solvents and other cleaning aids. Mixing and matching paint, stain and other finishes to job specifications. Removing and reinstalling fixtures (e.g., doorknobs, electric switch covers) as necessary.

Job DescriptionSummary: Hera Technologies, LLC (the "Company") is seeking a highly motivated Special Process Painter to join its team working in a hands-on, collaborative environment. The individual will perform the responsibilities listed below and other duties as required by the Company. The successful candidate must be familiar with a manufacturing environment, a self-starter who pays attention to detail and accuracy and take responsibility for their work. FLSA Classification: Hourly non-exempt Type: Full-time Work Hours: 2:00PM to 10:30PM Monday through FridayReports to: Composites ManagerLocation: 100% onsite at 1055 E Francis St. Ontario, CA 91761 Essential Job Duties(which include, but not limited to):Read and comprehend written and verbal instructions, detailed blueprints and other similar authorized drawings and documents, and be capable of doing basic mathematical calculations.Proficiency in working with various paints, coatings, and finishes, including selection, application, and mixing.Operate painting or coating equipment.Knowledge of preparing various surfaces (e.g., metal, wood, plastic) for specialized painting applications.Clean surfaces of workpieces in preparation for coating, using cleaning fluids, solvents, brushes, scrapers, steam, sandpaper, or cloth.Ability to work with high precision and attention to detail to achieve specific finishes and effects.Apply coatings, such as paint, ink, or lacquer, to protect workpiece surfaces, using spray guns, pens, scrapers, or brushes.Monitoring and reviewing information from materials, weather events, humidity and temperature of the environment, to detect or assess problems.Examine finished surfaces of workpieces to verify conformance to specifications and retouch any defective areas.Read job orders and inspect workpieces to determine work procedures and materials required.Select and mix ingredients to prepare coating substances according to specifications, using paddles or mechanical mixers Ability to troubleshoot issues and find solutions for complex painting projects.Check for good edge margins and alignment.Handle and dispose of hazardous materials in approved manner.Understand and execute work orders in a timely and professional manner.Maintain clean, organized work areas and securely stores equipment and supplies.Inspect work for the highest quality.Maintain strict attention to detail when working at customer's property.Follows all safety policies and procedures.Ensures that required documentation is complete and in compliance with regulations and standards.Support 5-S and adhere to health, safety, and environmental company guidelines.Perform cross-functional operations.The above statements are intended to describe the general nature and level of work being performed by the individual(s) assigned to this position. Management reserves the right to modify, add, or remove duties and to assign other duties as necessary. They are not intended to be an exhaustive list of all duties, responsibilities, and skills required. Minimum Requirements:High school diploma or equivalency certificate.Experience operating HVLP spray guns, including adjusting for proper paint flow to ensure high-quality finishes.Proficient in masking surfaces in preparation for painting to ensure clean, precise finishes. Preferred Requirements:Skilled in applying paint and coatings to aerospace hardware in accordance with industry standards.Experienced in measuring paint thickness to ensure compliance with specifications and quality standards Experience with specialized painting equipment, tools, and techniques (e.g., spray guns, airbrushes, automated painting systems). Experience with techniques like airbrushing, stenciling, custom finishes, or applying specific coatings (e.g., epoxy, powder coating). Work authorization: Must be authorized to work in the US.Must be willing to undergo a criminal background investigation and soft-inquiry credit check.Must be able to pass a pre-employment physical examination, including a drug and alcohol test. Work environment:Employee spends most of the day on their feet and must follow strict safety rules. They wear safety glasses to protect their eyes from airborne debris. Loud noise from machinery requires use of hearing protectors. They wear hard toe shoes or boots to protect their feet from potentially dropped objects.It is a professional work atmosphere, everyone from top managers to employees holds themselves accountable to their actions.It is a workplace environment where people are respectful, competent, and work together to meet their expectations.It is an open work culture in which no one feels excluded in whatever is going on within the workplace. People are not afraid to talk and are very supportive of each other.It is a rewarding working environment where managers make the effort to show gratitude to those who work hard. Physical Requirements: Employees may often need to: Use their hands to handle, control or feel objects, tools or controls.Stand for long periods of time.Repeat the same movements.Bend or twist their body. Move and/or lift at least 40 pounds.Benefits: Company paid employee medical, dental and vision insurance Retirement plan option upon eligibility Paid Sick LeavePaid Vacation 10 paid holidays Tuition reimbursement Discretionary bonuses Incentivized cash-based employee referral program Hera Technologies, LLC is proud to be an Equal Opportunity Employer. We maintain a workplace free of violence and drugs. We retain the option to perform substance abuse testing before and during employment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Defense contractor involved with product development and manufacturing of various systems for military aerospace and vehicles in the Los Angeles International Airport area is searching for an experienced Painter I (2nd/Evening Shift). With a 50+ year foundation, The Marvin Group supports all branches of the Department of Defense and allies around the globe on an array of programs and platforms. We support many military prime contractors including Lockheed Martin, Northrop Grumman and Raytheon. RESPONSIBILITIES Coat surface of parts, assemblies, and finished products with protective or decorative materials such as primer, paint, enamel, lacquer using spray gun in accordance with part drawing specifications and engineering documentation. Mask, sand, and prepare components for paint application Comply with Paint shop standard practices. May monitor and verify quality in accordance with process specifications. Ability to match or detect differences in colors, including shades of color and brightness Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment and ensure components are protected (PTP) Ability to read, understand, and comply with OSHA / ITAR regulatory requirements Properly care for and maintain shop equipment and tools as assigned Ability to read and interpret blueprints and engineering documentation Able to pass Pulmonary Function Test to obtain respirator certification Ability to use tools, equipment, and materials in the aircraft painting process. Other duties as assigned SKILLS & REQUIREMENTS High school diploma 2 years experience as a painter (Aerospace preferred, but not required) (Automotive experience acceptable) Experience in masking components / parts Experience in sanding paint / primer / metals Experience painting metals required Experience painting aircraft parts desired Automated paint experience is a plus Ability to work overtime required based on business needs Primarily manufacturing/assembly environment Must be able to work in the following environmental conditions: noise, vibration, proximity to moving mechanical parts, moving vehicles, electrical current Must be able to bend and reach Must be able to communicate effectively Regularly lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds, occasionally assist others to lift and/or move up to 50 pounds Will be performing substantial movements (motions) of the wrists, hands, and/or fingers This position must meet export control compliance requirements. All applicants must be “U.S. persons” within the meaning of ITAR, as defined: a U.S. Citizen, a lawful permanent resident, political asylee, or refugee. Interested parties please apply online and submit resume to ********************************** Visit us at marvingroup.com The Marvin Group is an EEO/AA/Disability/Vets Employer. Our company uses E-Verify to confirm the employment eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit ********************* If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact Human Resources at ************.

Parkwest Bicycle Casino is seeking a skilled and detail-oriented Painter to join our team! The ideal candidate will be responsible for installation of wallpaper, applies coats of paint, varnish, stain, enamel, or lacquer to decorate and protect interiors or exterior surfaces, trimmings, and fixtures of building and other structures. This position requires a strong eye for detail and a commitment to delivering high-quality work. Responsibilities Surface preparation - clean, sand, scrape, fill cracks/holes and prime surfaces to ensure proper adhesion. Protect surrounding areas using drop cloths, making tape or barriers. Apply paint, varnish, stains, sealers or other finishes to walls, ceilings, equipment, furniture or other surfaces using brushes, rollers, or spray equipment. Mix and match paints to achieve desired colors, textures or finishes. Measure , cut, and apply wallpaper neatly and accurately. Read work orders, blueprints or specifications to determine painting requirements. Erect scaffolding or set-up ladders to perform tasks above ground level. Wash and treat surfaces with oil, turpentine, mildew remover, or other preparations, and sand rough spots to ensure that finishes will adhere properly. Select premixed paints or mixes and matches colors of paint to stain, or varnish with oil or thinning and drying additives to obtain specified colors and consistencies. Smooth surfaces and removes old paint from surfaces to prepare surfaces for painting. Ensure that assigned work area is maintained in a safe condition. Must be able to work on-call and overtime when necessary. Must be available to work all shifts as needed. Perform other duties as assigned. Qualifications Must be able to pass mandatory screening including a background check and drug test Must be able to obtain and maintain a current California gambling establishment team member permit, badge or license. Must possess a valid California Driver's license. Able to work varied shifts and flexible schedules. Effective verbal and written communication skills. Able to communicate clearly with team members. Requires strong organizational skills and the ability to multi-task effectively. Have the technical aptitude to learn and practice proper use of all cleaning supplies, equipment, and chemicals. Education: High school diploma or G.E.D preferred. Completion of painting apprenticeship program and Safety Certification (OSHA, lead-safe practices, scaffolding, etc.) a plus. Experience: Prior painting experience of at least 3 years in a commercial or equivalent sized organization. Physical and Mental Requirements: Able and willing to regularly stand, walk and use hands to finger, handle, control, or feel objects, tools or controls. Frequently required to reach with hands and arms; climb, or balance; stoop, kneel, crouch, or crawl. Regularly required to bend, stretch, twist, or reach with your body, arms and/or legs. Able to lift, push and carry 10-25 lbs. frequently. Occasionally, 30-50 lbs. in certain jobs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, and ability to adjust focus. Ability to work in smoking environment areas. Must be able to perform all essential duties with or without accommodation. EEO Statement Parkwest Casino is an equal opportunity employer. All employment decisions are made without regard to race (including hair texture and protective hair styles), color, religion, religious creed (including religious dress and religious grooming), sex (including pregnancy, perceived pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity (including transgender identity and transitioning), gender expression and sex stereotyping, national origin, ancestry, citizenship, age, physical or mental disability, legally protected medical condition or information (including genetic information), family care or medical leave status, military caregiver status, military status, veteran status, marital status, domestic partner status, sexual orientation, status as a victim of domestic violence, sexual assault or stalking, enrollment in a public assistance program, engaging in protected communications regarding Team Member wages, requesting a reasonable accommodation on the basis of disability or bona fide religious belief or practice, or any other basis protected by local, state, or federal laws. Min USD $23.50/Hr. Max USD $27.00/Hr. Not ready to apply? Connect with us for general consideration.

Job Title: Shop Painter Steel Manufacturing Department: Manufacturing / Production Reports To: Shop Supervisor Job Type: Full-Time Work Schedule: MondayThursday, 5:00 AM 3:30 PM (4/10-hour shifts) Pay Range: $38,000 $50,000 annually, DOE Job Summary We are a locally owned steel tank manufacturing company in Paso Robles, CA, hiring 12 full-time Shop Painters to support fabrication operations. This position is responsible for the preparation and application of industrial coatings to large steel tanks and components. The ideal candidate is experienced in working in a steel shop environment and understands the importance of quality, safety, and efficiency in surface preparation and paint application. Essential Duties and Responsibilities Abrasive blast steel surfaces using grit blasting equipment to remove mill scale, rust, and old coatings per specifications. Clean and prepare metal surfaces for painting using solvents, power tools, and hand tools. Apply primers, epoxy coatings, and industrial topcoats using airless and conventional spray equipment. Mask and protect surfaces not requiring coating using proper taping and sheeting techniques. Ensure coatings are applied to the required mil thickness, adhesion, and finish standards. Inspect surfaces and finishes to ensure quality control and compliance with job specifications. Maintain and clean all painting equipment, spray guns, hoses, and PPE. Mix and thin paint/coatings according to technical data sheets and job requirements. Operate forklifts or overhead cranes to maneuver parts into paint area (as needed and trained). Properly label and dispose of hazardous waste materials in compliance with safety and environmental policies. Keep paint booth, blast area, and paint prep stations clean and organized. Participate in respirator fit testing and wear required PPE, including full-face respirators, Tyvek suits, and gloves. Follow all company safety protocols and contribute to a safe working environment. Perform additional tasks and support shop team as assigned. Qualifications Required Skills and Abilities Experience in an industrial, steel fabrication, or heavy-duty manufacturing paint environment. Knowledge of surface prep and coating systems for steel products. Ability to read and follow technical data sheets and work orders. Strong attention to detail, safety-conscious, and reliable. Ability to work independently or as part of a team under tight deadlines. Education and Experience Prior industrial painting or blasting experience preferred. Experience using airless spray equipment highly desirable. Respirator fit test required upon hire and annually thereafter (employer-provided). Forklift or crane certification is a plus (training available if needed). Physical Requirements Must be able to stand for extended periods and perform repetitive motions. Must be able to lift, push, or pull up to 50 pounds regularly. Must be able to wear a respirator and pass fit testing (clean-shaven requirement). Capable of working in hot, noisy, or dusty environments while wearing protective gear. Must be able to distinguish between colors and coating finishes. Compensation and Benefits 401(k) Retirement Plan Medical, Dental, and Vision Insurance Life Insurance Paid Sick Leave and Holiday Pay Aflac Supplemental Insurance AAP/EEO Statement We are an Equal Opportunity Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, veteran status, or disability. Other Duties This job description is not intended to cover every duty or responsibility. Other duties may be assigned as needed to support the operations of the company.

Description Now Hiring in the city of CoronaHiring PAINTERS Hours: 7AM-3:30PMPay rate: $20h/r Previous experience using paint gun and paint rollers Knowledge of proper paint preparation Ability to safely operate and maintain power tools Strong attention to detail and quality standards Help in other departments when needed Questions?Please give us a call (909)238-5848618 S Mt Vernon AveSuite 130San Bernardino, CA 92410Follow us on Instagram!Syncstaffing_CA Type: Full-time

Benefits: 401(k) 401(k) matching Dental insurance Health insurance Paid time off Vision insurance Wellness resources Summary The Painter is responsible for the day-to-day painting of the apartment community in accordance with company standards, policies and procedures. The Painter performs painting throughout the exterior and interior of the apartment community. The Painter, as with all company team members, is expected to conduct himself/herself in a professional manner that is consistent with the Business Ethics, Employee Conduct and Confidentiality policy outlined in the employee handbook. Duties Follows all safety procedures and regulations Performs paint service requests (work orders) for the apartment community and completes related paper work in a competent, professional and courteous manner. Performs scheduled full and partial paint of apartments, noting safety equipment used and regulation followed on vacant apartments and company policies and procedures. Performs scheduled preventative maintenance in accordance with the community's preventative maintenance program. Under the direction of the Maintenance Supervisor, organizes parts and materials required for paint service requests and plans paint work in advance to ensure efficient completion of all paint work. Assists in maintaining inventory by properly monitoring and recording inventory items. Maintains all storage facilities, equipment and the paint workshop in a neat and orderly working condition. Regularly provides information to the Property Management Staff regarding safety concerns and the general appearance of the community to ensure, high quality, safe living environment for the residents and marketability of the community. Retrieves and dispenses of any visible trash or garbage on the property in route to work assignments. Provides and maintains his/ her own hand tools customarily used in the industry and building trades. Performs other duties as assigned. Actual job duties and responsibilities may vary depending on the size of the community. Knowledge and Experience Knowledge of First Aid and Safety procedures. Previous building/apartment related painting experience. High School Diploma or equivalent. Skills and Abilities Perform all paint related tasks. Provide exceptional customer service. Manage projects through planning, organizing, and coordinating tasks. Operate hand tools. Effective oral and written communication skills. Work EnvironmentThe Painter works on-site at an apartment community and interfaces with external/internal customers, residents, and vendors on a regular basis. The position work schedule varies depending on the property. Hours are usually scheduled from 8 a.m. - 5 p.m. and may be scheduled to work weekend days (Sat/Sun). Must be available to work over-time as needed. The Painter should be flexible with availability depending on the needs of the property. Physical Requirements The Painter physical condition must be sufficient for the consistent and successful completion of the specific responsibilities defined for this position and for his/her performance to be in complete conformance with all professional standards defined for this position. While performing the duties of this job, the employee is frequently required to stand, walk, sit, use hands, reach with hands and arms, stoop, kneel, crouch, or crawl, talk, and hear. May be required to lift and/or move up to 50 pounds and operate power tools. Must be able to occasionally drive during the course of work. Compensation: $18.00 - $19.00 per hour Camber Corporation is a nationwide, full-service, real estate asset management company that offers a wide range of real estate consulting and management. The Camber team manages assets including multi-family units, retail centers, office complexes, self-storage, and hospitality businesses. Purpose Enriching lives by crafting exceptional environments and experiences. Niche We design, build and care for unique settings where communities thrive and memorable experiences come to life.

Job Description Constructs, repairs, and maintains wooden structures such as furniture, equipment, partitions, and other parts of hospital building using hand and power tools as assigned. Assists with general maintenance activities as directed. DUTIES AND RESPONSABILITIES Maintains established department policies, procedures, objectives, quality assurance and safety. Ensures that safety procedures are observed. Constructs and maintains building woodwork such as bins, counters, benches, stairs and doors. Repairs articles of furniture such as cabinets, chairs, storage fixtures and office equipment. Repairs loose or broken joints. Replaces damaged veneer. Cuts and shapes parts of furniture. Works from blueprints and drawings in constructing and repairing woodwork. Repairs or replaces windows, doors, ceiling and floor tile plus various wooden wall coverings. Operates woodworking machines such as band saw, mortiser, drill press, powersaw, joiner, shaper, and wood lathe. Requisitions lumber, hardware, and other supplies and equipment; maintains inventory of carpentry tools and equipment. Builds, repairs, and installs as directed within the capabilities of the trade. Maintains all required records and information pertinent to costing out work assignments. Keeps work areas orderly, clean and safe. Ensures proper care in the use of equipment and supplies. Participates in educational programs and inservice meetings. Performs other related duties as assigned or requested. REQUIREMENTS: 5 years previous related experience AGE SPECIFICS Patient care employees must be able to demonstrate the knowledge and skills necessary to provide care appropriate to patients of all age groups-must demonstrate knowledge of the principles of growth and development through the life span, possess the ability to assess data reflective of the patient's status, and interpret the appropriate information needed to identify each patient's needs in relation to age and to provide the care needed as described in the department's policies and procedures. This position possesses the ability to obtain and interpret information considering age specific needs for the following age groups: 19-40 yrs Young Adult 40-65 Middle Adult > 65 Older Adult PHYSICAL REQUIREMENTS The physical abilities requirements and environmental conditions indicated below are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.Activity Requirements: For the purposes of the Americans with Disabilities Act (ADA), this position has been assessed to identify essential and marginal job functions. The duties and responsibilities listed below are considered to be essential functions of the job. Reasonable accommodations may be made for individuals with qualified disabilities in order to perform the essential functions of their job. reaching, stooping, bending Lifting 2-10 lbs - Frequent (36-66%) Lifting 11-20 lbs - Frequent (36-66%) Lifting 21-30 lbs - Constant (67-100%) Lifting 31-40 lbs - Frequent (36-66%) Lifting 41-50 lbs - Occasional (0-35%) Lifting 51 lbs or more - N/A Sitting - Frequent (36-66%) Walking - Constant (67-100%) Standing - Constant (67-100%) Squatting - Occasional (0-35%) Pushing - Occasional (0-35%) - 50 lbs. Pulling - Occasional (0-35%) - 50 lbs. Climbing - Constant (67-100%) Kneeling - Constant (67-100%) Bending (waist) - Constant (67-100%) Crawling - Frequent (36-66%) Twisting (neck) - Frequent (36-66%) Twisting (waist) - Frequent (36-66%) Reaching forward - Constant (67-100%) Reaching overhead - Constant (67-100%) Keyboard/Mouse - Occasional (0-35%) Pinching/fine motor - Frequent (36-66%)

Overview: We are seeking a detail-oriented and mechanically inclined Paint Sprayer Technician to ensure all paint sprayer machines and related equipment are properly maintained, organized, and fully operational. This role is critical to keeping production running smoothly, minimizing downtime, and maintaining high-quality standards in all finishing operations. Company: We are a family-owned painting company that has been in business for over 40 years and are currently in a growth phase. We have a great reputation because we always put the customer first and do what we say. We believe in our team and want you to build a career you are proud of as we grow the company together. Everyone is given freedom to work in their strengths while building toward their goals. Core Values: • Customer 1st: understands the value of reputation • Hard Working: committed, consistent, reliable • Do what you say • Gets It: professional, knowledgeable, skilled, smart, good communicator • Does the right thing: genuine, fair, positive attitude, humble, no entitlement Key Responsibilities: Perform regular maintenance, cleaning, and calibration of paint sprayers, pumps, compressors, and other finishing equipment Inspect, troubleshoot, and repair paint sprayer machines and components to prevent and resolve equipment malfunctions Organize and manage all paint and equipment storage areas, ensuring tools, parts, and supplies are properly labeled, inventoried, and accessible Keep detailed maintenance logs, repair records, and equipment performance reports Work closely with production teams to identify and resolve equipment issues quickly, minimizing workflow interruptions Follow and enforce safety protocols and ensure all machinery is operated according to manufacturer and company standards Assist with equipment setup and testing for new jobs or paint formulations Recommend improvements to maintenance schedules, equipment organization, and workflow efficiency Qualifications: Proven experience with paint sprayer systems, industrial painting equipment, or mechanical maintenance Strong mechanical aptitude and troubleshooting skills Excellent organizational and recordkeeping abilities Knowledge of safety procedures, cleaning solvents, and preventive maintenance techniques Ability to work independently and prioritize multiple maintenance tasks Benefits: • Competitive pay • Health, dental & vision insurance • Year-round work

Job Description Under the direction of the department Supervisor/Manager, the Painter is responsible for coating surface parts, assembling and finishing products with protective or decorative materials such as paint, varnish, enamel, lacquer, dope or stain using spray gun. ESSENTIAL DUTIES & RESPONSIBILITIES: • Determines and selects correct mixes of coating material. • Applies paint to parts as directed by job orders. • Identifies and coats areas that are inaccessible to hand sprayer. • Identifies problems with equipment and will troubleshoot or repair paint guns. • Responsible for running ovens as needed. • Will complete visual inspection of masking on parts to ensure consistency as well as inspect for damaged product. • Completes necessary paperwork. • Works closely with the production team and assist as needed. • Adheres to safety regulations. • Performs other duties as assigned. QUALIFICATIONS & REQUIREMENTS: • Ability to communicate, read, and understand English. • Basic math skills. • Experience using and troubleshooting gravity spray gun. • Previous experience in aerospace industry or automotive repair, a plus. • Ability to effectively communicate both verbally and in writing with team members at all levels in the organization. ITAR REQUIREMENT: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident). PHYSICAL DEMANDS: • Walking/Standing for prolonged periods of time • Ability to lift up to 30 lbs • Exposed heat, noise and chemical fumes while in production areas • Good hand and eye coordination and movement We are an Equal Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, protected veteran status, or any other characteristic protected by applicable federal, state or local laws. 7:00AM - 3:30PM

Defense contractor involved with product development and manufacturing of various systems for military aerospace and vehicles in the Los Angeles International Airport area is searching for an experienced Painter I (2nd/Evening Shift). With a 50+ year foundation, The Marvin Group supports all branches of the Department of Defense and allies around the globe on an array of programs and platforms. We support many military prime contractors including Lockheed Martin, Northrop Grumman and Raytheon. RESPONSIBILITIES Coat surface of parts, assemblies, and finished products with protective or decorative materials such as primer, paint, enamel, lacquer using spray gun in accordance with part drawing specifications and engineering documentation. Mask, sand, and prepare components for paint application Comply with Paint shop standard practices. May monitor and verify quality in accordance with process specifications. Ability to match or detect differences in colors, including shades of color and brightness Comply with all safety, 5S, and housekeeping policies. Use personal protective equipment and ensure components are protected (PTP) Ability to read, understand, and comply with OSHA / ITAR regulatory requirements Properly care for and maintain shop equipment and tools as assigned Ability to read and interpret blueprints and engineering documentation Able to pass Pulmonary Function Test to obtain respirator certification Ability to use tools, equipment, and materials in the aircraft painting process. Other duties as assigned SKILLS & REQUIREMENTS High school diploma 2 years experience as a painter (Aerospace preferred, but not required) (Automotive experience acceptable) Experience in masking components / parts Experience in sanding paint / primer / metals Experience painting metals required Experience painting aircraft parts desired Automated paint experience is a plus Ability to work overtime required based on business needs Primarily manufacturing/assembly environment Must be able to work in the following environmental conditions: noise, vibration, proximity to moving mechanical parts, moving vehicles, electrical current Must be able to bend and reach Must be able to communicate effectively Regularly lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds, occasionally assist others to lift and/or move up to 50 pounds Will be performing substantial movements (motions) of the wrists, hands, and/or fingers This position must meet export control compliance requirements. All applicants must be “U.S. persons” within the meaning of ITAR, as defined: a U.S. Citizen, a lawful permanent resident, political asylee, or refugee. Interested parties please apply online and submit resume to ********************************** Visit us at marvingroup.com The Marvin Group is an EEO/AA/Disability/Vets Employer. Our company uses E-Verify to confirm the employment eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit ********************* If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact Human Resources at ************.

CertaPro Painters Responsibilities: Wearing the proper professional Painter attire; white pants or white shorts and a CertaPro Painters shirt. Keeping in regular communication with your Job Site Supervisor. This includes, but not limited to; know what jobs are next, what to do on days of inclement weather, etc. Maintaining all equipment. Dealing with or handling all reasonable requests from the customer. Take care of all reasonable requests from your supervisor. Attend all training sessions or company meetings as required. Make sure you and the Team you are working with follow safe working practices. Do good quality work and provide excellent service to all customers. Handle additional responsibilities as discussed. KEY DUTIES AND RESPONSIBILITIES:. Prepares, primes, sands, seals, patches and paints furniture, surfaces, buildings, and fixtures utilizing all types of painting materials. Tapes, flushes, repairs and applies texturing, acoustic layers on a variety of surfaces. Adjusts colors when necessary; utilizes enhanced finishing skills when appropriate. Operates, cleans and maintains all painting equipment, including brush, roll, sprayers and electrostatic sprayers, pumps, etc. Safely stores and labels all materials. Residential and Commercial Paint Projects Compensation: $20.00 - $24.00 per hour Opportunity is Knocking Qualities like working hard, getting the job done right, and fostering respect while working as part of a team are core to the CertaPro Painters brand culture. This makes each independently owned and operated CertaPro Painters franchise unique and fulfilling places to work. It is important to not only deliver memorable experiences for customers, but for team members of each independently owned and operated CertaPro Painters franchise, as well. CertaPro Painters - Our Values Deliver What You Promise. The promises made to CertaPro Painters customers is a first priority. ... Practice Continuous Improvement. ... Respect the Individual. ... Have Pride in What You Do. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to CertaPro Painters Corporate.

Parkwest Bicycle Casino is seeking a skilled and detail-oriented Painter to join our team! The ideal candidate will be responsible for installation of wallpaper, applies coats of paint, varnish, stain, enamel, or lacquer to decorate and protect interiors or exterior surfaces, trimmings, and fixtures of building and other structures. This position requires a strong eye for detail and a commitment to delivering high-quality work. Responsibilities Surface preparation - clean, sand, scrape, fill cracks/holes and prime surfaces to ensure proper adhesion. Protect surrounding areas using drop cloths, making tape or barriers. Apply paint, varnish, stains, sealers or other finishes to walls, ceilings, equipment, furniture or other surfaces using brushes, rollers, or spray equipment. Mix and match paints to achieve desired colors, textures or finishes. Measure , cut, and apply wallpaper neatly and accurately. Read work orders, blueprints or specifications to determine painting requirements. Erect scaffolding or set-up ladders to perform tasks above ground level. Wash and treat surfaces with oil, turpentine, mildew remover, or other preparations, and sand rough spots to ensure that finishes will adhere properly. Select premixed paints or mixes and matches colors of paint to stain, or varnish with oil or thinning and drying additives to obtain specified colors and consistencies. Smooth surfaces and removes old paint from surfaces to prepare surfaces for painting. Ensure that assigned work area is maintained in a safe condition. Must be able to work on-call and overtime when necessary. Must be available to work all shifts as needed. Perform other duties as assigned. Qualifications Must be able to pass mandatory screening including a background check and drug test Must be able to obtain and maintain a current California gambling establishment team member permit, badge or license. Must possess a valid California Driver's license. Able to work varied shifts and flexible schedules. Effective verbal and written communication skills. Able to communicate clearly with team members. Requires strong organizational skills and the ability to multi-task effectively. Have the technical aptitude to learn and practice proper use of all cleaning supplies, equipment, and chemicals. Education: High school diploma or G.E.D preferred. Completion of painting apprenticeship program and Safety Certification (OSHA, lead-safe practices, scaffolding, etc.) a plus. Experience: Prior painting experience of at least 3 years in a commercial or equivalent sized organization. Physical and Mental Requirements: Able and willing to regularly stand, walk and use hands to finger, handle, control, or feel objects, tools or controls. Frequently required to reach with hands and arms; climb, or balance; stoop, kneel, crouch, or crawl. Regularly required to bend, stretch, twist, or reach with your body, arms and/or legs. Able to lift, push and carry 10-25 lbs. frequently. Occasionally, 30-50 lbs. in certain jobs. Specific vision abilities required by this job include close vision, color vision, peripheral vision, and ability to adjust focus. Ability to work in smoking environment areas. Must be able to perform all essential duties with or without accommodation. EEO Statement Parkwest Casino is an equal opportunity employer. All employment decisions are made without regard to race (including hair texture and protective hair styles), color, religion, religious creed (including religious dress and religious grooming), sex (including pregnancy, perceived pregnancy, childbirth, breastfeeding, or related medical conditions), gender, gender identity (including transgender identity and transitioning), gender expression and sex stereotyping, national origin, ancestry, citizenship, age, physical or mental disability, legally protected medical condition or information (including genetic information), family care or medical leave status, military caregiver status, military status, veteran status, marital status, domestic partner status, sexual orientation, status as a victim of domestic violence, sexual assault or stalking, enrollment in a public assistance program, engaging in protected communications regarding Team Member wages, requesting a reasonable accommodation on the basis of disability or bona fide religious belief or practice, or any other basis protected by local, state, or federal laws. Min USD $23.50/Hr. Max USD $27.00/Hr.

Job Title: Shop Painter - Steel Manufacturing Department: Manufacturing / Production Reports To: Shop Supervisor Job Type: Full-Time Work Schedule: Monday-Thursday, 5:00 AM - 3:30 PM (4/10-hour shifts) Pay Range: $38,000 - $50,000 annually, DOE Job Summary We are a locally owned steel tank manufacturing company in Paso Robles, CA, hiring 1-2 full-time Shop Painters to support fabrication operations. This position is responsible for the preparation and application of industrial coatings to large steel tanks and components. The ideal candidate is experienced in working in a steel shop environment and understands the importance of quality, safety, and efficiency in surface preparation and paint application. Essential Duties and Responsibilities Abrasive blast steel surfaces using grit blasting equipment to remove mill scale, rust, and old coatings per specifications. Clean and prepare metal surfaces for painting using solvents, power tools, and hand tools. Apply primers, epoxy coatings, and industrial topcoats using airless and conventional spray equipment. Mask and protect surfaces not requiring coating using proper taping and sheeting techniques. Ensure coatings are applied to the required mil thickness, adhesion, and finish standards. Inspect surfaces and finishes to ensure quality control and compliance with job specifications. Maintain and clean all painting equipment, spray guns, hoses, and PPE. Mix and thin paint/coatings according to technical data sheets and job requirements. Operate forklifts or overhead cranes to maneuver parts into paint area (as needed and trained). Properly label and dispose of hazardous waste materials in compliance with safety and environmental policies. Keep paint booth, blast area, and paint prep stations clean and organized. Participate in respirator fit testing and wear required PPE, including full-face respirators, Tyvek suits, and gloves. Follow all company safety protocols and contribute to a safe working environment. Perform additional tasks and support shop team as assigned. Qualifications Required Skills and Abilities Experience in an industrial, steel fabrication, or heavy-duty manufacturing paint environment. Knowledge of surface prep and coating systems for steel products. Ability to read and follow technical data sheets and work orders. Strong attention to detail, safety-conscious, and reliable. Ability to work independently or as part of a team under tight deadlines. Education and Experience Prior industrial painting or blasting experience preferred. Experience using airless spray equipment highly desirable. Respirator fit test required upon hire and annually thereafter (employer-provided). Forklift or crane certification is a plus (training available if needed). Physical Requirements Must be able to stand for extended periods and perform repetitive motions. Must be able to lift, push, or pull up to 50 pounds regularly. Must be able to wear a respirator and pass fit testing (clean-shaven requirement). Capable of working in hot, noisy, or dusty environments while wearing protective gear. Must be able to distinguish between colors and coating finishes. Compensation and Benefits 401(k) Retirement Plan Medical, Dental, and Vision Insurance Life Insurance Paid Sick Leave and Holiday Pay Aflac Supplemental Insurance AAP/EEO Statement We are an Equal Opportunity Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, veteran status, or disability. Other Duties This job description is not intended to cover every duty or responsibility. Other duties may be assigned as needed to support the operations of the company.

Constructs, repairs, and maintains wooden structures such as furniture, equipment, partitions, and other parts of hospital building using hand and power tools as assigned. Assists with general maintenance activities as directed. DUTIES AND RESPONSABILITIES Maintains established department policies, procedures, objectives, quality assurance and safety. Ensures that safety procedures are observed. Constructs and maintains building woodwork such as bins, counters, benches, stairs and doors. Repairs articles of furniture such as cabinets, chairs, storage fixtures and office equipment. Repairs loose or broken joints. Replaces damaged veneer. Cuts and shapes parts of furniture. Works from blueprints and drawings in constructing and repairing woodwork. Repairs or replaces windows, doors, ceiling and floor tile plus various wooden wall coverings. Operates woodworking machines such as band saw, mortiser, drill press, powersaw, joiner, shaper, and wood lathe. Requisitions lumber, hardware, and other supplies and equipment; maintains inventory of carpentry tools and equipment. Builds, repairs, and installs as directed within the capabilities of the trade. Maintains all required records and information pertinent to costing out work assignments. Keeps work areas orderly, clean and safe. Ensures proper care in the use of equipment and supplies. Participates in educational programs and inservice meetings. Performs other related duties as assigned or requested. REQUIREMENTS: 5 years previous related experience AGE SPECIFICS Patient care employees must be able to demonstrate the knowledge and skills necessary to provide care appropriate to patients of all age groups-must demonstrate knowledge of the principles of growth and development through the life span, possess the ability to assess data reflective of the patient's status, and interpret the appropriate information needed to identify each patient's needs in relation to age and to provide the care needed as described in the department's policies and procedures. This position possesses the ability to obtain and interpret information considering age specific needs for the following age groups: 19-40 yrs Young Adult 40-65 Middle Adult > 65 Older Adult PHYSICAL REQUIREMENTS The physical abilities requirements and environmental conditions indicated below are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.Activity Requirements: For the purposes of the Americans with Disabilities Act (ADA), this position has been assessed to identify essential and marginal job functions. The duties and responsibilities listed below are considered to be essential functions of the job. Reasonable accommodations may be made for individuals with qualified disabilities in order to perform the essential functions of their job. reaching, stooping, bending Lifting 2-10 lbs - Frequent (36-66%) Lifting 11-20 lbs - Frequent (36-66%) Lifting 21-30 lbs - Constant (67-100%) Lifting 31-40 lbs - Frequent (36-66%) Lifting 41-50 lbs - Occasional (0-35%) Lifting 51 lbs or more - N/A Sitting - Frequent (36-66%) Walking - Constant (67-100%) Standing - Constant (67-100%) Squatting - Occasional (0-35%) Pushing - Occasional (0-35%) - 50 lbs. Pulling - Occasional (0-35%) - 50 lbs. Climbing - Constant (67-100%) Kneeling - Constant (67-100%) Bending (waist) - Constant (67-100%) Crawling - Frequent (36-66%) Twisting (neck) - Frequent (36-66%) Twisting (waist) - Frequent (36-66%) Reaching forward - Constant (67-100%) Reaching overhead - Constant (67-100%) Keyboard/Mouse - Occasional (0-35%) Pinching/fine motor - Frequent (36-66%)