Jobs in Pampa, TX

An Am Law 100 Law Firm is seeking a full-time Associate Attorney to join our Labor & Employment Group in Dallas. We are looking for candidates with 4 to 6 years of experience. Qualifications: Interpersonal Skills: Strong communication and collaboration abilities. Analytical Skills: Excellent writing and analytical capabilities. Attention to Detail: A keen eye for detail and a proactive approach to responsibilities. Litigation Experience: Significant litigation experience is a plus, even if not specifically in employment law. Candidates should have experience managing day-to-day responsibilities on cases. Responsibilities: The selected candidate will handle a variety of tasks, including: Taking depositions Covering hearings Interviewing witnesses Managing written discovery Drafting persuasive briefs Candidates should have substantive knowledge of key employment concepts, including Title VII, ADA, ADEA, FMLA, and other relevant federal and state employment laws. Opportunities: This role offers the chance to take on significant responsibility within a supportive environment. Candidates must have strong academic credentials and references, and must be a member of the Texas State Bar or willing to obtain admission promptly. Application Instructions: To apply, please submit your resume and cover letter.

Producers Midstream is an equity backed midstream service provider located in Dallas, TX. Field Operator is responsible for the proper and safe operation and maintenance of all pipelines, measurement facilities, compression facilities, and other associated equipment in an assigned area used to transport, treat, and store natural gas. Benefits include medical, dental, vision, 401k and more! DUTIES and RESPONSIBILITIES Essential and other important responsibilities and duties may include, but are not limited to, the following: * Proper operation and maintenance of pipelines in accordance with company policies/procedure and applicable DOT regulations. E.g., gas measurement, TEG dehydrators, and natural gas compressors. * Perform preventative maintenance. E.g., Pigging, sample collection, greasing valves, changing filters and tightening loose connections, etc. * Maintain adequate housekeeping at all locations and pipelines. * Review equipment logs and gather information for readiness. * Prepare daily, weekly and monthly reports and communicate them to the Field Foreman. * Perform minor equipment repair. * Identify equipment issues and take appropriate action to correct. E.g., prepare and submit work orders for repairs by third-party vendors. * Coordinate equipment maintenance and repair with third-party vendors. * Effectively interact with third-party customers, vendors, regulatory personnel and the public to properly complete job duties. * Actively participate in the Operator Qualification (OQ) Program. * Ability to be on call 24-7 on a rotation with other coworkers. * Must live within 60 - 65 miles from reporting location to accommodate call outs. * Respond to call outs no later than 2 hours from the time the call is sent. * Comply with all company policies and procedures. * Participate in partnership safety program and initiatives. * Maintain and adhere to required trainings, policies, and procedures. * Actively participate in safety programs and initiatives. * Communicate with partnership control centers, business groups, and other operating groups as necessary. * Comply with company safety policies and procedures. * Must maintain valid driver's license in state of residency. * Work assigned shift and be available for overtime if needed. * Perform related duties and responsibilities as required and other duties as assigned. * Comply with all internal, state and federal regulations. * Maintain honest, respectful, and effective internal and external working relationships. * Complete all training as directed by management. QUALIFICATIONS Knowledge of: * Computer usage and Microsoft Office (or comparable) products. * Natural gas pipeline maintenance and repair. * Basic reading and mathematics as applied to equipment maintenance. * Accepted safety standards and methods of natural gas pipelines. * Pertinent Federal, state and local laws, codes and regulations affecting health and safety. * Natural Gas Compression and Driven Equipment experience and understanding. * Dehydration facility experience and understanding. Ability to: * Observe and take remedial action on equipment issues. * Read and interpret gauges, equipment logs and specifications. * Communicate clearly and concisely, both orally and in writing. * Maintain effective working relationships. * Deal tactfully and cost-effectively with vendors. EXPERIENCE and TRAINING GUIDELINES Any combination of experience and training that would likely provide the required knowledge and abilities is qualifying. A typical way to obtain the knowledge and abilities would be: Preferred Education and/or Experience: * High school diploma or GED equivalent helpful. * One to two years of related natural gas field operation experience desired.

Northern Natural Gas has an exciting career opportunity available for a Pipeline Intern to gain insight into a career in the energy industry! Our interns gain real-life experience working alongside full-time employees along the largest interstate natural pipeline system in the United States. APPLY TODAY! Student currently enrolled in a technical or associate of applied science degree program from an accredited college. Areas of study include: * Aviation Maintenance Tech * Diesel Tech * Diesel Mechanics * Natural Gas Technology * Natural Gas Transmission * Natural Gas Measurement * Gas Industrial Mechanics * Natural gas Compression Technology * Electro-mechanical System Technology, Electronic System Technology, Electrical System Technology, Automated Systems Engineering, Instrument & Control Technology or Industrial Automation Technology * Corrosion Technology Additional responsibilities include: * Proficiency with personal computer and various software (Excel, Word, PowerPoint, Access, etc) * Effective oral and written communication skills * Effective analytical and problem-solving skills * Support the company's employee policies and procedures, including workplace safety * Ability to read and understand pipeline maps and alignment sheets * Mechanical aptitude * Ability to work safely independently * Ability to work outdoors in all types of climate conditions * Ability to work in close quarters, work while kneeling, squatting, sitting, climbing and standing; ability to climb up and down ladders, stairs, platforms Employees must be able to perform the essential functions of the position with or without an accommodation. We celebrate diversity, equity and inclusion, and we are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Under the direction of the operations manager or team leader, support the team with daily operations, maintenance tasks, project activities or administrative duties to learn to fundamentals of the pipeline industry. Technical Skill Areas include: * Controls * Measurement * Corrosion * Mechanical * Liquified Natural Gas * Underground Storage Operations * Compressor Station Operations * Pipeline Maintenance * Equipment Operations * Environmental Standards

We're seeking a reliable, safety-conscious, and tech-savvy Field Data Collection Driver to support a high-precision mapping initiative for our client's digital mapping project. In this role, you will operate a company-provided vehicle equipped with a specialized 360-degree camera system to capture street-level imagery. This imagery is used to support global geospatial technology platforms and mapping services, which will power maps and navigation products worldwide. No mapping experience required - Training and technical support will be provided. Key Responsibilities Operate a vehicle equipped with camera systems to capture 360-degree imagery. Follow pre-defined driving routes provided daily. Upload collected data from onboard devices after each shift. Conduct regular equipment checks to ensure smooth operation. Communicate with the technical support team regarding issues or updates. Maintain a professional and courteous presence while representing the program in public areas. Who You Are You are a responsible, tech-comfortable driver who enjoys working independently. You follow rules carefully, keep your vehicle in good condition, and care about safety. Additional Details All equipment, vehicles, and training are provided. Candidates must pass a background check, comply with routine safety screenings, and complete onboarding training. Schedule: Full-time, Monday to Friday, with some flexibility depending on weather and route completion Willing to drive up to 8 hours/day on public roads, occasionally covering long distances. Access to secure parking (preferably with CCTV) for the company vehicle is preferred - assistance may be provided for qualifying candidates. Requirements Valid driver's license with at least 3 years of driving experience (5+ preferred). Good driving record with no major violations in the past 3 years. Strong attention to detail and comfort using mobile apps or in-vehicle technology. Ability to lift up to 25 lb (10-15kg) occasionally and perform basic physical tasks related to equipment setup Reliable, self-motivated, and able to work independently for extended hours. Preferred Qualifications Previous experience in field data collection, delivery driving, or GIS-related roles. Familiarity with geospatial tools or interest in mapping technologies. Benefits Competitive pay and full reimbursement for fuel, tolls, and travel expenses Experience working with cutting-edge camera, mapping technologies, and to be part of a globally recognized tech-driven project

Are you looking for a part-time job that you can sink your ‘heart' into? Would you like to work a flexible schedule? Would you like to earn up to $18 per hour? 5 hours a week? As a Program Coordinator, you will be an integral member of our mission to improve the quality of life for individuals, families, and senior citizens in affordable housing communities. PRS provides quality social assistance to residents through programs designed to raise culture, life skills, and family standards. The Program Coordinator provides CORES certified resident services, which include programs that build knowledge, marketable skills, enhance a healthy lifestyle and lift families up. Who is the ideal candidate? A self-starter who thrives in an independent environment is well organized, resourceful, learns fast, self-disciplined, and able to multi-task. Ideally, someone who is very outgoing, enthusiastic and has a heart for their community. A compassionate leader for social and economic change. The ideal candidate is seeking a part time flexible position in the social services, education, and nonprofit careers. General Function: Serve as a link between PRS and the affordable housing community by maintaining a visible, professional, cooperative and courteous relationship between property, community and management. Create and implement a monthly calendar of developmental activities and essential resources that prioritizes the supportive services needed for resident social, educational, and economic needs. Demonstrating leadership in overseeing donations, resident engagement, and volunteer efforts. Essential Functions: Provide a welcoming and inviting atmosphere to all residents, serve as an initial point of contact to the community center. Prepare reports based on distributed calendar, sign-in sheets, and the number of contracted program hours and activities offered each month. Design, create and post monthly calendars and updated flyers weekly to advertise activities and program offerings on-site. Door to door distribution throughout the property including the use of stairs. Oversees program offerings and activities, recruit's volunteers, solicit donations and work with community partners. Log communications with volunteers, community partners and donations regularly, submit monthly log. Provide information about local resources or assistance within the community to residents. Enlist residents' support and participation with program planning and activities to ascertain whether additional services or programs are needed. Communicate resident needs to personnel to facilitate addressing those needs proactively. Independently monitor, observe, and interact with children, adults and or seniors. Maintain sign-in sheets for each activity and program offering regardless of participation or attendees. Fiscally responsibly use tax-exempt certificate and number. Monitor monthly petty cash while replenishing consumable goods, supplies, paper, office supplies, and basic cleaning supplies. Supervise the use of the community center while maintaining a clean and organized presentation. Maintain neat organization of all PRS binders, documents, forms to present upon request to property management and resident services personnel. Other duties as assigned by direct management and or PRS corporate staff. Experience and Qualifications Desired Must be available to work 1 day per week; Hours are 12-5pm (Monday- Friday) Occasional evening and weekend availability may be required as job duties demand, typically 1-2 times per quarter. Relevant experience in education, social work, non-profit or a related field; Volunteer experience will be considered. Experience with children, teens, adults and/or senior citizens in various capacities. Ability to work independently without supervision and multitask. Exceptional organizational, computer and administrative skills. Effective written and oral communication skills. Familiarity with community and social service resources. Must have home computer, access to email and capability to do light printing. Any employment consideration is conditional pending the results of all pre-employment screening processes required by state law, which may include but are not limited to the following: background check, drug screen and reference check. Important Note About Employment Opportunities at PRS: Portfolio Resident Services (PRS) has recently identified fraudulent schemes where scammers impersonate our organization to solicit fake job applications. Please note: all legitimate PRS job openings are only posted on our official website. We never charge application fees, training, equipment fees, or background check costs. To protect yourself, always verify postings by checking our website and ensure emails come from an official @prspurpose.org address. If in doubt, contact us at ********************.

USA Compression Partners, LP, (NYSE: USAC) provides mission-critical natural gas compression services to large upstream and midstream energy companies. We are an operations-centric, technology-driven employer with 800+ employees in 18 states across the US. We owe our success to the quality of our employees, our strong commitment to safety, and our superior service to our customers. Summary A Field Service Technician (FST) is responsible for maintenance and service of USA Compression equipment reporting to the Area Service Manager (ASM). With minimal supervision and significant autonomy, the typical areas of responsibility include safely performing scheduled maintenance, maintaining and building customer relationships, and providing first line support for equipment troubleshooting. USA Compression employees are proudly responsible for maintaining a safe and professional work environment and positive workplace aligned with our Pillars culture. Duties and Responsibilities * Ensure routine maintenance plan in place and minimize down time on all assigned equipment. * Understand and follow company handbook, and all company or customer safety and environmental policies. * Maintain run time of natural gas compression units per contractual agreements. Accurately gather and prepare data for reports critical to unit operations on regular due dates. * Respond quickly to ASM or customer inquiries. * Oversee and/or participate in the installation of compression units and customer with installations. * Work closely with the Lead Service Tech and ASM on major repairs; escalate when necessary based on protocol. * Maintain and operate company vehicle according to company guidelines. * Work with sales team to identify new sales or equipment opportunities. * Maintain and/or partner with a parts department to ensure sufficient parts inventory for each unit. * Keep each assigned unit clean following good housekeeping rules and maintain safe working conditions. * Any other duties or responsibilities as assigned by supervisor. * Full-time hourly position. Skills/Capabilities and Education * Technical or trade school certification or additional work experience in related field. * Prefer at least 2 years of experience in gas compression with preference to CAT, Ariel and/or Cummins certifications and experience. Depending on the equipment assigned, this role may maintain large or small horsepower units, gas lift or traditional compression units along with other related equipment associated with our business. * Valid driver's license with a Motor Vehicle Record history acceptable to USA Compression. * Solid professional communication/interface skills with customer field personnel, onsite vendors, and other employees. This role is often the USAC position with the most customer interaction. Excellent customer service and positive communication skills are critical to the success in the FST role. * Ability to be self-managed and work independently with little or no supervision. * High degree of mechanical ability. * Experience reading and understanding technical manuals. * Capable of safely driving commercial size truck * Experience in configuring natural gas compression equipment. * Ability and flexibility to work extended hours including periodic on-call weekends. * Ability to understand written and verbal communication from the company and supervisor including training, procedures, instructions, etc. * Applicant must have the ability to legally work in the U.S. Work Conditions * Typically, an FST's work day consists of driving a USA Compression service vehicle to customer locations to perform repair and maintenance activities. * Periodic lifting requirements in excess of 50 lbs. * Ability to stand and walk on uneven and varied terrain, climb ladders and stairs; and stoop, squat, kneel, crouch and crawl depending on the task requirements. * Exposure to extremes in temperature and weather conditions depending upon assigned location. * Some exposure to high noise levels in excess of 85dBA that require ear protection, as well as exposure to potentially hazardous chemicals and materials. * Working conditions in natural gas compression vary from one job site to another. Some job sites are indoors in compressor stations while other sites are outside, exposed to a variety of weather conditions. * There is a strong emphasis on safety while working with heavy equipment and machinery.

Provide students with appropriate learning activities and experiences in the core academic subject area assigned to help them fulfill their potential for intellectual, emotional, physical, and social growth. Enable students to develop competencies and skills to function successfully in society. SPECIAL QUALIFICATIONS: Knowledge of academic subject(s) assigned Ability to research and develop teaching units General knowledge of curriculum and instruction Ability to instruct students and manage their behavior Strong organizational, communication, and interpersonal skills

McGavock Auto Group is a fast-growing leader in automotive retail, and we are looking to add a qualified GENERAL MANAGER for our newest acquisition store in Pampa, TX. McGavock Auto Group is a company that offers a team environment, great benefits and ongoing training and support for its associates. If you are aligned with our values of integrity, transparency, professionalism and teamwork- now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend. The automotive General Manager ensures the profitability of the dealership by overseeing the various departments which include variable operations (sales & financing), fixed operations (service & parts), and the business office (accounting & administration). Duties of the General Manager include, but are certainly not limited to, planning, motivating and coordinating the dealership's management through leadership and solid business practices. General Managers should have at least 3 years of dealership sales management in a supervisory position and a minimum of 5 years as a General Manager in a high-volume dealership. Experience in other dealership departments is a plus. They must have strong leadership and organizational skills, and the ability to understand profit and loss statements and manage a large, diverse staff. General Managers must also possess strong communication skills to deal with customers, employees and vendors. General Managers are required to stay abreast of the federal, state, and local regulations affecting their operations and comply with them, including hazardous waste disposal and OSHA Right-to-Know regulations. Also, they must provide the necessary training on regulations and ethical practices. In addition to competitive pay, we offer our associates the following benefits: Job training and career advancement opportunities Health, Dental and Vision Insurance Paid Time-off Employee vehicle purchase program Performance / longevity bonuses Responsibilities Hiring all management positions, completing performance evaluations regularly and developing short and long-term goals for each department manager (includes administrative, sales, parts, collision centers and service departments) Planning and developing short and long-term goals and objectives annually, and submitting time projections to corporate management for approval Effectively communicating with the comptroller/office manager on a weekly basis to review departmental forecasts and ensure consistency with annual projections Paying close attention to daily operations, recommending and creating improved courses of action where necessary Explaining the policies and procedures of the dealership to all employees and following up with employees to ensure that these issues are understood and followed Providing dealership management with weekly reports on the financial condition of the dealership Overseeing the monthly financial statement to ensure it is complete, accurate and submitted on time to the management/dealership owners Coordinating with the business/administrative office to ensure that records and analyses are correctly maintained Creating and maintaining a good working relationship with lending institutions and manufacturer personnel Coordinating regular meetings with the managers of each department to ensure their profitability and efficiency Overseeing the hiring and training of all department managers Maintaining an enthusiastic attitude to build positive employee attitudes and morale Overseeing and maintaining compensation plans for all employees Creating cost-effective advertising programs and merchandising strategies for the dealership Focusing on any customer complaints that department managers are unable to rectify and taking the necessary steps to resolve these complaints Qualifications Willing to accept full accountability for operational and financial performance Supervisory/management/leadership skills Strong knowledge of vehicle value/pricing trends Strong computer and Internet skills (multiple platforms) P & L experience Two years' Finance and Insurance experience at a minimum Five years of progressively responsible customer service experience in a managerial role Financial analysis and reporting experience Strong knowledge of regulatory and compliance laws Strong communication, presentation and writing skills Professional appearance and work ethic Self-motivated, goal oriented, and ability to work within a fast-paced environment Current, valid driver's license and satisfactory Motor Vehicle Report (MVR) *All applicants must pass pre-employment testing to include background checks, MVR, and drug testing to qualify for employment* If you are aligned with our values of integrity, transparency, professionalism and teamwork- now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend. McGavock Auto Group is an Equal Employment Opportunity employer.

Job Title: Part-Time Personal Housekeeper & Healthy Cook Schedule: Flexible - ideally 4-5 days per week (e.g., late mornings to early afternoons) Pay: Competitive hourly rate (based on experience) About the Role: Looking for a dependable and detail-oriented individual to help keep my apartment in Brickell clean and prepare very healthy, home-cooked meals. This is a part-time role best suited for someone who understands nutrition and enjoys cooking with fresh, clean ingredients. Responsibilities: Daily cleaning: dishes, sweeping/mopping, laundry, bathroom, kitchen, and general tidying Cooking healthy meals with fresh, whole ingredients (no processed foods, healthy oils only - e.g., olive oil, avocado oil) Optional but a big plus: ability to prepare fresh sushi Weekly meal prep and portioning Grocery list management or light shopping Occasional errands or home organization if needed Ideal Candidate: Has prior experience in housekeeping and cooking Passionate about clean, healthy eating - can cook high-protein, balanced meals with vegetables, lean meats, etc. Knows how to avoid processed ingredients and cook using clean methods (e.g., no seed oils, low sodium, no sugar-added sauces) Sushi-making experience is a major plus Speaks English or Spanish Trustworthy, punctual, and has attention to detail Has reliable transportation to Brickell Must be legally authorized to work in the U.S.

**Yearout Mechanical, a Legence company** Yearout Mechanical (********************* is a New Mexico based company specializing in the installation of mechanical and process systems for the commercial, government, manufacturing and industrial communities of New Mexico and Texas. Since our incorporation in August of 1964, Yearout Mechanical has consistently grown and expanded its capabilities, reaching its present position as the premier mechanical contractor in New Mexico. Our mission is to be invaluable to our partners (clients, vendors, industry, and employees) so they cannot imagine success without us, by providing comfortable, reliable and efficient mechanical systems that meet our partners' needs. The Safety Manager has the responsibility of protecting the company and its employees in all health and safety issues. The Safety Manager directs the organization's safety program to protect employees and the company against harm and maintain safe working conditions. This is a hands-on, high-impact role that requires both field and office collaboration with internal teams, clients, and vendors. **Essential Duties and Responsibilities:** + Ensure compliance with all applicable federal, state and local legislation and codes governing environmental health and safety. + Keep up to date with local, state, and federal requirements for health and safety, ADA, Workers' Compensation, etc. + Develop safety plans, policies, and procedures for company and projects. + Ensure that company and personnel are working within the current local, state and federal requirements for safety. + Continuously promote a safety conscious work environment and promote the company and its health and safety program. + Train employees in all areas of safety as guided by the Safety Training Matrix and maintain training records of all employees. + Work closely with the Director of Safety, Project Managers, and foremen to ensure safe projects and to protect the interest of the company and its employees. + Perform documented job site safety inspections of all projects. + Work with Safety Counseling, Inc. to ensure job sites are inspected on a regular basis and follow up on any issues discovered during inspections that need to be addressed. + Organize and coordinate safety meetings. + Investigate all accidents and incidents regarding safety. + Organize and maintain a company safety committee; leads all safety committee functions, facilitates all safety committee meetings. + Assist the purchasing department in obtaining the correct safety equipment and supplies. + Work to resolve safety issues before they become major problems. + Maintain statistical safety data and information. + Building and Construction - Knowledge of materials, methods, and the tools involved in the construction or repair of buildings, plants, manufacturing facilities, or other structures. + Design - Knowledge of design techniques, tools, and principals involved in production of precision technical plans, drawings and models. + Public Safety and Security - Knowledge of relevant equipment, policies, procedures and strategies to promote effective local, state and company operations for the protection of people, data, property and institutions. + Customer and Personal Service - Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction. + Computers - Knowledge of computer software, including applications. + Administration and Management - Knowledge of business and management principles involved in strategic planning, resource allocation, leadership technique, production methods, and coordination of people and resources. + Communication & Team Collaboration - Effectively communicating with supervisors, co-workers, and subordinates by telephone, in written form, e-mail, or in person. + Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. + Strategic Problem Solving - Analyzing information and evaluating results to choose the best solution and solve problems. + Management of Personnel Resources - Motivating, developing, and directing people as they work, identifying the best people for the job. + Time Management - Managing one's own time as it relates to the position and duties. + Active Learning - Understanding the implications of new information for both current and future problem-solving and decision-making. + Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one. + Monitoring - Monitoring/Assessing performance of yourself or the organization to make improvements or take corrective action as it relates to the position and duties. **Qualifications (Education, Experience, and Licenses/Certifications required):** + High School Diploma + 3- 5 years of construction experience. + Must be an OSHA 500 authorized instructor. + Must have an advanced understanding with MS Office 365 and MS Outlook. + Must be familiar with Safety software. Physical Requirements: + Position requires regular sitting, standing, walking, talking, hearing, and vision. + Position requires the ability to lift and carry up to 50 lbs. + Position requires work on a computer for extended periods of time. Travel Requirements: + Travel to jobsites and to meet with superintendents, foremen, vendors, general contractors and sub-contractors. Pre-Screening Requirements: + Valid driver's license and a driving record that meets company standards. + Successfully pass a background check, drug screening, and employment verification. **About Legence** Legence (****************************** (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems-enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world's most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients. **Benefits Overview** **Health & Welfare:** Company Paid medical, dental, vision, prescription drug, accident & sickness benefit, basic group life and AD&D, and Employee Assistance Program **Time Off Benefits:** Paid vacation, company-paid holidays, and paid sick leave **Financial Benefits:** 401(k) retirement savings plan **Reasonable Accommodations** If you need assistance or accommodations during the application or interview process, please contact us at ******************* or your dedicated recruiter with the job title and requisition number. **Third-Party Recruiting Disclaimer** Legence and its affiliates do not accept unsolicited resumes from agencies; any such submissions without a prior signed agreement authorized by Legence Holdings LLC's CHRO or Director of Talent Acquisition will not incur fees and are considered property of Legence. **Pay Disclosure & Considerations** Where pay ranges are indicated, please note that a successful candidate's exact pay will be determined based relevant job-related factors, including any of the following: candidate's experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws. **Equal Employment Opportunity Employer** Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations. EEO is the Law **Job Details** **Pay Type** **Hourly**

Midwest Compressor Systems is seeking a skilled and experienced Welding Supervisor to lead our fabrication team. This role is critical in ensuring high-quality welding operations that meet ASME standards while fostering a safe, efficient, and collaborative work environment. If youre a hands-on leader with a passion for precision and team development, we want to hear from you! Key Responsibilities Supervise and coordinate daily welding and fabrication operations. Ensure compliance with ASME, AWS, and API codes. Review and enforce Welding Procedure Specifications (WPS). Inspect welds and coordinate with QA/QC for NDT and documentation. Train and evaluate welders on techniques, safety, and code requirements. Promote and enforce OSHA safety standards and company policies. Maintain accurate records of welding activities and certifications. Collaborate with other departments to resolve production issues and improve processes. High school diploma or equivalent. 35 years of welding and supervisory experience. Strong knowledge of welding techniques, materials, and ASME codes. Proficient in reading technical drawings and documentation. Strong leadership, communication, and organizational skills. Ability to pass MVR, background check, and drug screen. Willingness to work extended hours, including evenings and weekends. PI54a2ae1bee24-31181-39350517

Join the Brew Crew! A salary that grows with you! Base salary of $55k and potential for periodic bonuses. JOB DESCRIPTION: STAND MANAGER The Manager assumes full responsibility for their location's growth, profitable operation, and the preservation of 7 Brew's culture, mission statement, and values. The Manager is the leader of their crew and maintains genuine connections with them, as well as the unique nuances of the business at their stand(s). In addition to scheduled shifts, the Manager is expected to coach, train, perform admin duties, and oversee operations. The Manager reports to their District Manager. RESPONSIBILITIES AND DUTIES · Must be proficient in all Brewista and Shift Lead duties and skill sets · Maintains excellent wait times, cleanliness, and customer interactions through training, coaching, and encouragement · Provides regular feedback to each team member on strengths and areas of growth · Works with their crew's needs and availability to create a weekly shift schedule, maintaining a low cost of labor while ensuring quick wait times and short lines · Tracks and orders necessary inventory, small wares, parts, and equipment, while maintaining a low cost of goods sold by eliminating waste and accurate counting · Ensures appropriate cash handling, deposits, and change for their stand · Facilitates team bonding and development through regular meetings and events for their Shift Leads and Brewistas, in both one-on-one and group contexts · Takes ownership of solutions, whether through solving the problem themselves or looping in an approved partner or vendor · Ensure the crew is knowledgeable and meeting all health requirements. · Is always developing new leaders to step into upcoming roles, regardless of current or future needs · Promptly implements and communicates directives from upper management · Thoughtfully delegates tasks to their leadership team and Brewistas to facilitate efficiency and appropriate development WORK SCHEDULE REQUIREMENTS · Works a flexible schedule, which can include early mornings (5 a.m.) and late nights (11:30 p.m.) · Visits the stand outside of scheduled shifts to coach, observe, train, and perform administrative duties · Regularly works weekends and is available to work holidays, if necessary · Is always available by phone or in-person to promptly address any needs at the stand SKILLS AND QUALIFICATIONS · Can create and maintain genuine, uplifting interactions with strangers for up to two minutes at a time · Can work carefully and quickly with hot water and coffee, glass bottles, and dairy products · Can work outside for prolonged periods, regardless of weather conditions · Can lift up to 50lbs · Can stand comfortably for hours at a time · Can climb a ladder and use a stepladder · Can stand, sit, bend, kneel, twist, and squat as necessary to stock and clean in the stand · Can safely walk in between and around cars in the drive-thru line · Can safely use a utility knife · Can quickly and cleanly operate any position in the stand during peak hours · Can maintain awareness of the shift's operations while working a position · Can assertively and graciously confront their friends to address operational, procedural, or cultural issues · Can adapt to problems and implement solutions during stressful situations · Effectively manages multiple projects and deadlines · Can effectively lead and direct multiple personality types under pressure · Has proven leadership abilities in a fast-paced environment with 40+ team members · Beginner-level proficiency in Microsoft Office Suite Job Type: Full-time Pay: $55,000 base plus monthly bonuses based on store-level performance Benefits: · 401(k) · Health insurance with optional dental and vision · Paid time off · Flexible work schedule

MaintainX is the world's leading Asset and Work Intelligence platform for industrial and frontline environments. We power operational excellence for 13,000+ companies globally and are rapidly expanding across Latin America. We recently completed a $150 million Series D funding round, bringing our total funding to $254 million and valuing the company at $2.5 billion. MaintainX is seeking a Senior Account Executive to drive large, strategic deals with mid-market and enterprise-level organizations across Latin America (5,000+ employees). This is a high-impact role in which you will own some of the most meaningful opportunities in our LATAM expansion. You will lead complex sales cycles involving multiple departments, ROI modeling, proof-of-concepts, executive negotiations, and deep account strategy work. This role is ideal for a seasoned seller with the confidence, patience, and strategic mindset required for enterprise expansion. What You'll Do Own full-cycle enterprise sales across large mid-market and enterprise customers (5,000+ employees). Break into new logos through highly targeted outbound and partner-driven motions. Navigate complex buying committees: Operations, Reliability, Maintenance, IT, Procurement, Finance, and Executive leadership. Lead compelling business case creation with quantified ROI. Coordinate cross-functional resources including Sales Engineering, Product, Customer Success, and Leadership. Guide prospects through procurement, security reviews, and legal negotiation. Build long-term strategic relationships and account expansion paths. Develop and execute territory-level enterprise strategies for LATAM. About You 5-8+ years of B2B SaaS closing experience, with enterprise or upper mid-market sales exposure. Proven success running complex, multi-month sales cycles. Experience with 6-7 figure opportunities or equivalent LATAM enterprise deal sizes. Strong executive presence and ability to communicate ROI and technical value at C-suite level. Fluent in Spanish and English; Portuguese strongly preferred for Brazilian enterprise accounts. Deep understanding of Latin American enterprise purchasing structures and relationship-driven sales culture. Highly strategic, disciplined, and able to orchestrate multiple internal teams. You thrive in ambiguity and enjoy building something new within a high-growth environment. What's in it for you: Competitive salary and meaningful equity opportunities. Healthcare, dental, and vision coverage. 401(k) / RRSP enrolment program. Take what you need PTO. A Work Culture where: You'll work alongside folks across the globe that reflect the MaintainX values, Smart Humble Optimist. We believe in meritocracy, where ideas and effort are publicly celebrated. About us: Our mission is to deliver one platform for maintenance, repair & operations teams to keep the physical world running. We believe the greatest asset in any organization is the people. That's why we built an intuitive, mobile-first solution to help boost productivity and collaboration across teams and locations. MaintainX is committed to creating a diverse environment. All qualified applicants will receive consideration for employment without regard to race, colour, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Job DescriptionCertified Nursing Assistant (CNA) / Certified Medical Assistant (CMA) / Medical Assistant (MA) / Licensed Practical Nurse (LPN) Job Work side-by-side with expert wound care physicians and nurse practitioners assisting with all aspects of wound care treatment in skilled nursing facilities. Complete wound care training and certification will be provided. QUALIFICATIONS• Certified Nursing Assistant (CNA) or Medical Assistant (MA) in good standing with the State.• Must relate positively and favorably to facility staff, patients/residents, and families while working cooperatively with others.• Must meet all local health regulations and pass post-employment physical exam if required. This requirement also includes a criminal background investigation and reference inquiry.• Must maintain regular attendance on the job, including traveling daily to partner facilities.• Prior experience in a Skilled Nursing Facility (SNF). DUTIES• Hands-on assistance for the wound physician during bedside rounds as needed.• Troubleshoot for the physician with SNF staff.• Facilitate efficiency during rounds by ensuring patients are available and ready for the physician to conduct consults.• Assist the SNF wound care nurse when necessary, including, but not limited to, incontinence care, preparing/positioning the patient for physician evaluation, assisting with dressing application, and full-body skin exams.• Take simple notes as dictated by the physician during rounds, including, but not limited to, documenting wound measurements, wound locations, and the treatment plan.• Assist with telemedicine visits and the use of a camera for video conferencing.• Assist the physician with obtaining written consent for procedures when required by SNF. Job Type: 1099/Independent Contractor Pay: $21.00 to $24.00 per hour Medical Specialty: Geriatrics Physical Setting:Long-term care Nursing home Work Location: On the road We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Summary: Moves and cleans vehicles, keeps the vehicles in sound working condition, and helps general manager as requested. About Us: Parkway is locally owned and operated. We have been in the Houston area for more than 40 years. We have three locations… Parkway Chevrolet, Parkway Family Kia, and Parkway Family Mazda. We operate elite, state-of-the-art service departments. Benefits Medical, Dental and Vision Life and Short-Term Disability Continuous Improvement Training 401K with Match Paid Vacation Paid Holidays Employee Discounts on Parts, Services and Vehicles Opportunities for Growth Essential Duties Maintains new- and used-vehicle inventory appearance and performance by cleaning interior and exterior of vehicles, replenishing all vehicle fluids as needed, and replacing batteries when necessary. Places buyer guides and stock tags in vehicles. Keeps new- and used-vehicle lots neat and orderly, moving cars as directed by the general manager and in accordance with dealership display standards. Cleans driveway and sidewalks, removing debris as necessary. Drives vehicles to and from service lane, service stalls, and parking lot as needed. Makes key tags for vehicles. Compares serial numbers of incoming cars against transit sheets. Inspects vehicles to detect damage and to verify the presence of accessories listed on the invoice. Records the description of damages and lists missing items on the delivery receipt. Parks new vehicles in assigned areas. Catalogs and stores keys. Assigns stock control numbers to cars. Moves sold vehicles to maximize use of space and keep the lot in order. Delivers sold vehicles to the new-vehicle preparation department. Services vehicles in storage to protect tires, battery, and finish against deterioration. Cleans the service and customer areas. Performs routine building maintenance in such a manner as to minimize interruption of customers or employees. Cleans all signs, posters, service signs, mirrors, fans, and vending machines. Maintains hot beverage areas by cleaning counter surfaces and restocking coffee and related supplies as needed. Sets up downstairs conference room for meetings. Cleans bathrooms and restocks paper supplies as needed. Cleans all showroom vehicles and displays daily. Empties and cleans all trash receptacles, inside and outside as needed. Removes all debris from lot. Maintains yard equipment and cleaning supplies. Runs errands as directed by Inventory Supervisor and Sales Managers. Understands and complies with OSHA Right-to-Know and other federal, state, and local regulations. Uses proper eye, hand, and body protection when using products that require protection. Ability to commute/relocate: Tomball, TX: Reliably commute or planning to relocate before starting work (Required) Schedule: 8 hour shift Day shift Monday to Friday Weekends as needed License/Certification: Driver's License (Required) Parkway Family Auto is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Enterprise Products Partners L.P. is one of the largest publicly traded partnerships and a leading North American provider of midstream energy services to producers and consumers of natural gas, NGLs, crude oil, refined products and petrochemicals. Our services include: natural gas gathering, treating, processing, transportation and storage; NGL transportation, fractionation, storage and import and export terminals; crude oil gathering, transportation, storage and terminals; petrochemical and refined products transportation, storage and terminals; and a marine transportation business that operates primarily on the United States inland and Intracoastal Waterway systems. The partnership's assets include approximately 50,000 miles of pipelines; 260 million barrels of storage capacity for NGLs, crude oil, refined products and petrochemicals; and 14 billion cubic feet of natural gas storage capacity The Pipeline Technician's responsibilities include, but are not limited to: * Performing or assisting with routine maintenance of turbines, pumps and electric motors such as bearing and mechanical seal replacements, alignments, couplings, sumps, fans, drain piping modifications, etc. * Maintenance on other mechanical equipment such as block valves, control valves, air compressors, valve actuators(electric and manual), etc. * Assist with replacement of turbines, pumps, motors, valves, and other equipment as needed. * Maintain and operate custody transfer measurement facilities and perform product quality control tests. * Participate and successfully complete training programs, process safety management reviews, and safety meetings required to comply with state and federal regulations. * Must meet the requirements of the Company's Operator Qualification * Reviews procedures as necessary to ensure compliance of all company and industry standards to meet all regulatory agency requirements. * Performs remedial and preventative maintenance and maintains facility appearance and safety through good housekeeping practices inside and outside of the facilities. * Perform preventative and general maintenance on electronic and pneumatic equipment and parts associated with this equipment. * Provide training and technical support. * Utilizes precision tools and test equipment as needed. * Responds to operational emergencies. * Performs regulatory required inspections. * Locate pipelines as needed and oversee excavations and line crossings. * Launch and receive cleaning pigs and assist with the launch and receiving of smart pigs. * Install pipeline markers and do routine inspections on ROW. * Maintain and operate corrosion control equipment. * Attend and participate in damage prevention meetings. * Interface with various landowners including private, state, federal, etc. The successful candidate will meet the following qualifications: * High school diploma or G.E.D. equivalent is required. * VoTech certificate or Associates Degree or related work experience is a preferred. * Previous experience and knowledge of industry related maintenance and repair standards preferred. * Knowledge of the general design and operation of NGL and crude oil pipelines. * Basic computer skills including spreadsheet and word processing applications. * Valid driver's license with acceptable driving record. * Minimum of 3 years of experience, preferably in the energy industry. * 2-4 years previous experience with the operation, maintenance, and/or construction of a crude oil and NGL pipeline facilities preferred. * Possess a strong commitment to personal and job safety. * Must demonstrate mechanical aptitude and dexterity in the use of tools and equipment. * Knowledge of pumps, regulators, MOV's, electronic controls and medium electrical voltage is desired with an understanding of NGL and crude oil pipelines. * Ability to read and interpret alignment sheets, schematics and P&IDs. * Must be able to perform basic mathematical calculations. * Excellent written and verbal communication skills, decision making skills and strong work ethic. * Able to work independently as well as maintain and promote good working relationships within a team environment. * Able to assume responsibility, be flexible, perform duties and handle multiple tasks under potentially stressful and/or hazardous conditions. * Must be willing to work overtime and call-outs. * Required to live within 1 hour of response time of job assignment. * Self-motivated individual; accountable and self-driven to learn and to continuously develop and improve his/her skills through both formalized and on the job training. * Must be able to demonstrate sound judgment with the ability to make decisions and corrections when problems are detected. * Must have a history of being dependable and reliable, take pride in a job well done, and enjoy working hard. * Good organizational skills, strong customer service with the ability to interface with various land owners and other corporate and field personnel. * Works indoors and outdoors in and around industrial and electrical equipment. * Works in temperature extremes due to weather conditions and operating equipment. * Uses physical force to lift, push, pull and hold equipment and tools. * Climbs and works at various heights and may work in a standing, sitting, lying down, crouched or kneeling position. * Routinely reacts to visual, aural and other signals, including alarms and instructions, and is required to visually inspect work.

The Teller I conducts transactions quickly, accurately, and efficiently while meeting or exceeding service quality standards. This position safeguards bank assets assigned to them, contributing to the banks growth bank by promoting and cross-selling bank products and services. ESSENTIAL DUTIES AND RESPONSIBILITIES 1. Receives, pays out cash, and handles negotiable items, loan payments, deposits, withdrawals and transfers. This duty is performed daily, about 15% of the time. 2. Sets up, closes and balances teller station. This duty is performed daily, about 10% of the time. 3. Records sales of monetary instruments. This duty is performed daily, about 5% of the time. 4. Assists customers with inquiries in person or by telephone. This duty is performed daily, about 10% of the time. 5. Maintains neat and well stocked teller area. This duty is performed weekly, about 5% of the time. 6. Cross sells bank products and services. This duty is performed as needed, about 5% of the time. 7. Follows limits established for protection of customer accounts and bank safety and soundness. This duty is performed daily, about 5% of the time. 8. Adheres to bank policies and procedures. This duty is performed daily, about 5% of the time. 9. Lift coin bags up to 50 lbs. This duty is performed as needed, about 5% of the time. 10. Assists with balancing Vault, ATM, Night Drop, and Coin Machine. This duty is performed as needed, about 5% of the time. 11. Assists with proper scanning of bank documents and proof work. This duty is performed as needed, about 5% of the time. 12. Exercise judgment when applying holds and making check cashing decisions. This duty is performed daily, about 10% of the time. 13. Cross train to be available to open basic new consumer accounts. This duty is performed as needed, about 5% of the time. 14. Adheres to work schedule. Must be flexible in availability for work schedule. This duty is performed daily, about 5% of the time. 15. Maintains positive, friendly and professional attitude and appearance. This duty is performed daily, about 5% of the time. 16. May be required to work an alternative location within the region or market. This duty is performed as needed. 17. The ability to work in a constant state of alertness and in a safe manner. This duty is performed daily. 18. Completes required BSA/AML training and other compliance training as assigned. This duty is performed quarterly. 19. Perform any other related duties as required or assigned. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION AND EXPERIENCE Mental alertness and adaptability to office and field area work routines. Equivalent to four years high school or GED, with particular emphasis during high school in office skills, shop skills, or others, plus 0 to 6 months related experience and/or training, or equivalent combination of education and experience. COMMUNICATION SKILLS Ability to effectively communicate information and respond to questions in person-to-person and small group situations with customers, clients, general public and other employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply and divide numbers. Ability to perform these mathematical skills using money and other forms of measurement. CRITICAL THINKING SKILLS Ability to use common sense understanding in order to carry out simple multi-step instructions. Ability to deal with standardized situations with limited variables. REQUIRED CERTIFICATES, LICENSES, REGISTRATIONS None PREFERRED CERTIFICATES, LICENSES, REGISTRATIONS Not indicated. SOFTWARE SKILLS REQUIRED Basic: 10-Key, Spreadsheet, Word Processing/Typing WORKING CONDITIONS Periodically exposed to such elements as noise, intermittent standing, walking, pushing, carrying, or lifting; but none are present to the extent of being disagreeable. ENVIRONMENTAL CONDITIONS The following work environment characteristics described here are representative of those an employee encounters while performing essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. PHYSICAL ACTIVITIES The following physical activities described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. Semi-repetitive, low physical. Semi-repetitive type work which requires periods of concentration for varied time cycles as prescribed by the tasks. While performing the functions of this job, the employee is continuously required to talk or hear; regularly required to stand, walk, sit, use hands to finger, handle, or feel, reach with hands and arms; frequently required to stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 50 pounds; regularly lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. ADDITIONAL INFORMATION * Must have a high school diploma or general education degree (GED) * Must be able to effectively communicate information and respond to questions in person-to-person and small group situations * Must have basic math skills and 10-key * Must have cash handling experience in a business environment * Must be able to maintain a positive, friendly and professional attitude and appearance * May be required to work an alternative location within the region or market

PRIMARY RESPONSIBILITIES * Work from the directions of the supervisor to move Wind Tower sections, set up and operate the MIG welders, Follow and complete daily build schedule. * Weld, grind, and repair each Wind Tower section prior to presenting it to the Quality Inspectors. This person will also repair all weld defects as directed by the Quality Inspectors * Perform most of the work individually. Essential tools and welding equipment will be provided, however, accountability and maintenance will be the employee's responsibility * Work timely and expeditiously to deliver an on-time product without manufacturing errors * Perform other duties as directed by leaders and management * Clamp, grind, tack-weld, or bolt components into position before welding * Actively participate in department safety, demonstrate excellent safety practices and behaviors which conform to all safety policies and procedures. Follow all OSHA safety regulations and wear prescribed PPE as required. * Embrace culture of Lean Manufacturing and the implementation of change * Perform other work-related tasks as assigned. FACILITY/GROUP SPECIFIC RESPONSIBILITIES * To carry out all duties in accordance with the Quality Assurance procedures and departmental works instructions. * To contribute to general improvements in the quality of key activities within the department. * Comply with all Keystone Tower Systems Company and HSE procedures and policies. EDUCATION & EXPERIENCE QUALIFICATIONS * High school diploma or equivalent * A minimum of 1 year of experience with MIG welding in a manufacturing environment JOB REQUIREMENTS * Ability to identify and communicate maintenance or product problems to departmental supervision * Must be a person of passion and integrity who has the drive to excel and deliver exceptional results * Incumbent to pass an AWS welder qualification test and be able to use the MIG welding equipment without difficulty * Knowledge of welding properties of variety of metals and alloys, welding procedures, and practices essential to ensure the quality of the product * Ability to calculate formula using basic mathematics, standard U.S. and Metric Measurements * Able read and interpret work instructions, blueprints, manufacturing drawings or similar information * Ability to lift 75+ pounds

Clarendon College is seeking qualified candidates for the following face to face Adjunct Faculty positions. Courses will be taught in person in the assigned TDCJ units in the Pampa and Childress areas. Applicant must be able to pass a TDCJ background test in order to be able to teach in the prison. Speech Psychology Sociology English Math History Government Art Criminal Justice Science Must possess a Master's degree with 18 graduate credits in the teaching field. This is an open continuous applicant pool and positions are filled on an as needed basis. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.