Process Engineer jobs at Panasonic - 400 jobs

Job Purpose: Eliminate Losses in the supply chain, OEE, Waste, Quality, speed, brand and reduce Tobacco/NTM waste through structured root cause analysis & standardization. Results: Overall Equipment Efficiency improvement through reduction of quality defects, rate losses, process centerline deviations, minor stops, and changeover losses Product Quality Measures (consumer complaints, product and package defects) Waste minimization through scrap reduction and improved process stability Responsibilities: Organizes IOS workshops schedule and Agenda Plans and Schedule the training program Synchronizes resources: Training window-Trainers-Materials-Machine availability and apprentices Certification processes coordination Create operating principles for line training. Lead the Finished Product Quality (FPQ) Daily Management System for quality factors. Own process centerline compliance for all Q-Factor standards. Lead Startups and New Initiatives Qualification including IQ, OQ, and PQ. Coordinate resources to develop standards for new initiatives (SOPs, critical maintenance procedures, Q-Factor audits, troubleshooting guides, skills matrices, step-up cards). Lead chronic loss elimination across waste, scrap, quality incidents, and consumer claims. Build team capability in technical troubleshooting for process failures. Manage rapid changeover methodology for brand changes. Own standardized equipment and the change management system for the assigned process. Serve as engineering's primary point of contact for technology and platform-related topics. Provide structured feedback to design and engineering. Maintain a comprehensive Loss Map related to this role. Training provider management (Assessment, quotation, purchases, payments, agenda, etc.) Training / Skills - Category A: Machine Safety - Job Safety Analysis FPQ, Centerlines, Q-Factors Centerlines Daily Management System Tobacco and material waste reduction Chronic loss elimination, RCA, Focused Improvement Machine operating principles Validation: IQ / OQ / PQ Training / Skills - Category B: Ability to provide structured feedback to design Laser Focus Boards Reliability Engineering tools (FMEA) Autonomous Maintenance (AM) steps Skills and Education Required Skills: Ability to lead cross-functional teams Excellent communication and documentation skills Ability to prioritize effectively in a high-speed manufacturing environment Education and Experience: Associate's degree in Mechatronics Engineering, Electronic, Electromechanics, or equivalent experience. Recently graduated is an option. 1-5 years of experience in manufacturing, process engineering, quality engineering, or related fields Other Expectations Spend more than 70% of time on the production floor Become the designated process expert for assigned manufacturing area

The Entry-Level Industrial Engineer will support continuous improvement and operational excellence initiatives across warehouse operations within a fast-paced third-party logistics (3PL) environment. This role applies industrial engineering principles and data-driven analysis to improve productivity, labor efficiency, space utilization, and service performance across distribution centers. The ideal candidate is analytical, detail-oriented, and eager to turn operational data into actionable insights through hands-on warehouse engagement. Key Responsibilities Perform detailed data analysis on existing and potential customer labor, productivity, throughput, and order volume to identify trends, risks, and improvement opportunities Analyze warehouse processes (receiving, putaway, picking, packing, shipping) using process maps, data models, and performance metrics Build and maintain productivity reports, scorecards, and dashboards for operations leadership Assist with labor planning, staffing models, and workload forecasting based on historical and projected volume data Use data to support layout changes, slotting strategies, and storage optimization decisions Present findings and recommendations using clear visuals, summaries, and data-backed narratives Support continuous improvement initiatives using Lean methodologies and root cause analysis supported by data Required Qualifications Bachelor's degree in Industrial Engineering, Manufacturing Engineering, or a related field Strong analytical, quantitative, and problem-solving skills Proficiency in Microsoft Excel, including pivot tables, advanced formulas, and basic data modeling Ability to analyze large datasets and translate results into operational recommendations Solid understanding of industrial engineering concepts such as time studies, standard work, and productivity analysis Ability to work in a warehouse environment and collect real-time operational data Strong written and verbal communication skills Preferred Qualifications Internship or co-op experience involving data analysis in warehousing, logistics, manufacturing, or supply chain operations Familiarity with WMS and LMS data structures Experience with data visualization or BI tools (Tableau, Power BI) Basic SQL or scripting experience for data extraction and analysis Exposure to Lean, Six Sigma, or continuous improvement tools Experience working with KPIs such as UPH, LPH, utilization, and service-level metrics Salary range $70,000-$75,000 with eligibility for a performance-based bonus. Comprehensive benefits Paid time off (PTO) Sick time Personal days Medical, Dental, Vision, & Life insurance 401(k) retirement plan

The Entry-Level Industrial Engineer will support continuous improvement and operational excellence initiatives across warehouse operations within a fast-paced third-party logistics (3PL) environment. This role applies industrial engineering principles and data-driven analysis to improve productivity, labor efficiency, space utilization, and service performance across distribution centers. The ideal candidate is analytical, detail-oriented, and eager to turn operational data into actionable insights through hands-on warehouse engagement. Key Responsibilities Perform detailed data analysis on existing and potential customer labor, productivity, throughput, and order volume to identify trends, risks, and improvement opportunities Analyze warehouse processes (receiving, putaway, picking, packing, shipping) using process maps, data models, and performance metrics Build and maintain productivity reports, scorecards, and dashboards for operations leadership Assist with labor planning, staffing models, and workload forecasting based on historical and projected volume data Use data to support layout changes, slotting strategies, and storage optimization decisions Present findings and recommendations using clear visuals, summaries, and data-backed narratives Support continuous improvement initiatives using Lean methodologies and root cause analysis supported by data Required Qualifications Bachelor's degree in Industrial Engineering, Manufacturing Engineering, or a related field Strong analytical, quantitative, and problem-solving skills Proficiency in Microsoft Excel, including pivot tables, advanced formulas, and basic data modeling Ability to analyze large datasets and translate results into operational recommendations Solid understanding of industrial engineering concepts such as time studies, standard work, and productivity analysis Ability to work in a warehouse environment and collect real-time operational data Strong written and verbal communication skills Preferred Qualifications Internship or co-op experience involving data analysis in warehousing, logistics, manufacturing, or supply chain operations Familiarity with WMS and LMS data structures Experience with data visualization or BI tools (Tableau, Power BI) Basic SQL or scripting experience for data extraction and analysis Exposure to Lean, Six Sigma, or continuous improvement tools Experience working with KPIs such as UPH, LPH, utilization, and service-level metrics Salary range $70,000-$75,000 with eligibility for a performance-based bonus. Comprehensive benefits Paid time off (PTO) Sick time Personal days Medical, Dental, Vision, & Life insurance 401(k) retirement plan

Owl Labs is seeking a highly skilled and experienced Audio Digital Signal Processing (DSP) Engineer to join our team. In this role, you will be responsible for designing, developing, and optimizing advanced audio signal processing algorithms for our cutting-edge communications and conferencing products. WHAT YOU'LL DO Design and implement state-of-the-art audio signal processing algorithms for real-time communication systems Develop and optimize audio enhancement features such as noise reduction, echo cancellation, and voice activity detection using both analytic and AI techniques Collaborate with cross-functional teams to integrate audio processing solutions into our product ecosystem Conduct research on emerging audio technologies and recommend innovative solutions to improve product performance Analyze and troubleshoot complex audio-related issues in existing products QUALIFICATIONS EDUCATION Bachelor's degree in Acoustics, Audio Engineering, Electrical Engineering, or related field (Masters preferred) EXPERIENCE 5+ years of experience in DSP and audio signal processing, preferably in the conferencing, communications, and/or pro audio industry Strong expertise in digital signal processing techniques, particularly those applicable to voice and audio Proficiency in MATLAB, Python, C/C++ programming and optimization for embedded systems Experience with audio coding standards and wireless audio technologies SKILLS Experience with real-time audio processing and low-latency systems Familiarity with audio codecs, internet audio protocols, and relevant industry standards Demonstrated ability to translate complex mathematical concepts into efficient, production-ready code Excellent problem-solving and analytical skills Passion for creating high-quality, innovative audio solutions Adaptability to rapidly changing technology landscapes Strong communication abilities, both written and verbal Ability to work independently and as part of a collaborative team Experience with audio testing and measurement tools is a bonus WHAT WE OFFER Fully paid medical, Dental, and Vision Insurance for you and your dependents Unlimited PTO Generous Parental Leave Work From Home Stipend Commuter Benefit Flexibility to work remotely or in a hybrid setting (based on location) 15 Paid Holidays Owl Labs is a hybrid company, we are over 40% remote, and our headquarters is based in Boston, MA. This role is a hybrid position. Salary Range$140,000-$160,000 USD Owl Labs is an Equal Opportunity Employer committed to our values of embracing inclusivity and creating a culture where everyone feels respected and connected, no matter the location of their work environment. We invite applications from people of all walks of life and are committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need accommodations due to a disability, please let us know. Who We Are Owl Labs is a collaborative tech company, creating an equalized meeting and learning experience for all, wherever participants may be. Powering hybrid teams and remote work is in our DNA. Owl Labs has been a leader when it comes to celebrating and connecting hybrid teams and classrooms -- meaning both in-office and remote workers, in-room students and at-home learning. We're best known for the Meeting Owl product line, a smart 360 camera, mic, speaker all-in-one solution. Sitting in the center of the table, the Meeting Owl uses vision and voice recognition to shift the camera to focus on who's speaking, giving all participants a feeling as if they're in the same room. With the continued rise of hybrid teams and remote workers, our products allow for better collaboration and productivity no matter your location. Our award-winning product, the Meeting Owl Pro, was named one of TIME magazine's 100 Best Inventions of 2020 and has been recognized by CES Innovation Awards 2020, Red Dot Design Awards 2020, SXSW Innovation Awards 2020. Our team was recognized as an Inc. Best Workplaces 2020 and 2021 and named on the esteemed Inc.'s Editor's List.

Job Description Owl Labs is seeking a highly skilled and experienced Audio Digital Signal Processing (DSP) Engineer to join our team. In this role, you will be responsible for designing, developing, and optimizing advanced audio signal processing algorithms for our cutting-edge communications and conferencing products. WHAT YOU'LL DO Design and implement state-of-the-art audio signal processing algorithms for real-time communication systems Develop and optimize audio enhancement features such as noise reduction, echo cancellation, and voice activity detection using both analytic and AI techniques Collaborate with cross-functional teams to integrate audio processing solutions into our product ecosystem Conduct research on emerging audio technologies and recommend innovative solutions to improve product performance Analyze and troubleshoot complex audio-related issues in existing products QUALIFICATIONS EDUCATION Bachelor's degree in Acoustics, Audio Engineering, Electrical Engineering, or related field (Masters preferred) EXPERIENCE 5+ years of experience in DSP and audio signal processing, preferably in the conferencing, communications, and/or pro audio industry Strong expertise in digital signal processing techniques, particularly those applicable to voice and audio Proficiency in MATLAB, Python, C/C++ programming and optimization for embedded systems Experience with audio coding standards and wireless audio technologies SKILLS Experience with real-time audio processing and low-latency systems Familiarity with audio codecs, internet audio protocols, and relevant industry standards Demonstrated ability to translate complex mathematical concepts into efficient, production-ready code Excellent problem-solving and analytical skills Passion for creating high-quality, innovative audio solutions Adaptability to rapidly changing technology landscapes Strong communication abilities, both written and verbal Ability to work independently and as part of a collaborative team Experience with audio testing and measurement tools is a bonus WHAT WE OFFER Fully paid medical, Dental, and Vision Insurance for you and your dependents Unlimited PTO Generous Parental Leave Work From Home Stipend Commuter Benefit Flexibility to work remotely or in a hybrid setting (based on location) 15 Paid Holidays Owl Labs is a hybrid company, we are over 40% remote, and our headquarters is based in Boston, MA. This role is a hybrid position. Salary Range$140,000-$160,000 USD Owl Labs is an Equal Opportunity Employer committed to our values of embracing inclusivity and creating a culture where everyone feels respected and connected, no matter the location of their work environment. We invite applications from people of all walks of life and are committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need accommodations due to a disability, please let us know. Who We Are Owl Labs is a collaborative tech company, creating an equalized meeting and learning experience for all, wherever participants may be. Powering hybrid teams and remote work is in our DNA. Owl Labs has been a leader when it comes to celebrating and connecting hybrid teams and classrooms -- meaning both in-office and remote workers, in-room students and at-home learning. We're best known for the Meeting Owl product line, a smart 360 camera, mic, speaker all-in-one solution. Sitting in the center of the table, the Meeting Owl uses vision and voice recognition to shift the camera to focus on who's speaking, giving all participants a feeling as if they're in the same room. With the continued rise of hybrid teams and remote workers, our products allow for better collaboration and productivity no matter your location. Our award-winning product, the Meeting Owl Pro, was named one of TIME magazine's 100 Best Inventions of 2020 and has been recognized by CES Innovation Awards 2020, Red Dot Design Awards 2020, SXSW Innovation Awards 2020. Our team was recognized as an Inc. Best Workplaces 2020 and 2021 and named on the esteemed Inc.'s Editor's List.

Job Description Process Engineer About the Role We are seeking a hands-on Process Engineer to support our production operations and ensure high-quality, efficient manufacturing. In this role, you will work closely with production teams to troubleshoot issues, improve processes, and deliver engineering solutions that meet customer requirements. What You'll Do Support production by reducing downtime and resolving engineering issues (programming, MPI, tooling, design, line stoppages). Drive quality and yield improvements through root cause analysis and corrective actions. Review build schedules and ensure all documentation, tooling, and processes are ready for production. Conduct pre-build reviews, first article inspections, and validate process setups (SMT, Through-Hole, Reflow, Wave Solder, etc.). Design, order, and maintain tooling such as stencils and fixtures. Provide real-time technical support and training to operators. Review quality data, identify trends, and implement process improvements. Collaborate with Program Managers and Quality teams to meet customer requirements and support DFM, ECOs, and failure analysis. Participate in ISO compliance, audits, and continuous improvement initiatives. What We're Looking For Bachelor's degree in Engineering or Technology (or equivalent experience). Experience in electronics manufacturing processes (SMT, Through-Hole, Reflow, Wave Solder). Strong problem-solving and analytical skills with a focus on continuous improvement. Ability to work well under pressure in a fast-paced environment. Excellent communication and collaboration skills. Why Join Us You'll have the opportunity to make a direct impact on production quality, efficiency, and customer satisfaction while working in a collaborative environment that values innovation and process excellence.

About the Role We are seeking a hands-on Process Engineer to support our production operations and ensure high-quality, efficient manufacturing. In this role, you will work closely with production teams to troubleshoot issues, improve processes, and deliver engineering solutions that meet customer requirements. What You'll Do Support production by reducing downtime and resolving engineering issues (programming, MPI, tooling, design, line stoppages). Drive quality and yield improvements through root cause analysis and corrective actions. Review build schedules and ensure all documentation, tooling, and processes are ready for production. Conduct pre-build reviews, first article inspections, and validate process setups (SMT, Through-Hole, Reflow, Wave Solder, etc.). Design, order, and maintain tooling such as stencils and fixtures. Provide real-time technical support and training to operators. Review quality data, identify trends, and implement process improvements. Collaborate with Program Managers and Quality teams to meet customer requirements and support DFM, ECOs, and failure analysis. Participate in ISO compliance, audits, and continuous improvement initiatives. What We're Looking For Bachelor's degree in Engineering or Technology (or equivalent experience). Experience in electronics manufacturing processes (SMT, Through-Hole, Reflow, Wave Solder). Strong problem-solving and analytical skills with a focus on continuous improvement. Ability to work well under pressure in a fast-paced environment. Excellent communication and collaboration skills. Why Join Us You'll have the opportunity to make a direct impact on production quality, efficiency, and customer satisfaction while working in a collaborative environment that values innovation and process excellence.

This role is responsible for assisting with day-to-day engineering support for manufacturing operations, as well as assists implementing yield, process and product improvements. Essential Functions: * Works with others to maintain safety, product quality/yield and manufacturing effectiveness through daily troubleshooting and resolution of process difficulties. * Assists with optimization of manufacturing processes to provide sustainable gains in cost effectiveness and product performance through capital projects, statistical analysis, designed experiments and procedural changes. * Assists with resolution of customer technical/quality issues and provide special products. * Participates on cross-functional teams to resolve problems, develop, and start up new products. * Other duties as assigned. Qualifications: * Bachelor's Degree in Engineering or related field. May consider equivalent work experience in lieu of degree * 2+ years of process engineering experience * Familiarity with engineering modeling and design software

This role is responsible for assisting with day-to-day engineering support for manufacturing operations, as well as assists implementing yield, process and product improvements. Essential Functions: - Works with others to maintain safety, product quality/yield and manufacturing effectiveness through daily troubleshooting and resolution of process difficulties. - Assists with optimization of manufacturing processes to provide sustainable gains in cost effectiveness and product performance through capital projects, statistical analysis, designed experiments and procedural changes. - Assists with resolution of customer technical/quality issues and provide special products. - Participates on cross-functional teams to resolve problems, develop, and start up new products. - Other duties as assigned. Qualifications: - Bachelor's Degree in Engineering or related field. May consider equivalent work experience in lieu of degree - 2+ years of process engineering experience - Familiarity with engineering modeling and design software Full-Time Rogers Corporation ("Rogers") maintains a continuing policy of non-discrimination in employment. It is Rogers policy to provide equal opportunity and access for all persons, without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or status as a disabled veteran or other protected veteran, in all phases of the employment process and in compliance with applicable federal, state, and local laws and regulations.

MGP Ingredients is a leading supplier of premium distilled spirits and food ingredient solutions. Its Distilling Solutions segment provides bourbons, whiskeys, ryes, gins, and vodkas to craft and multinational brands. MGP's own Branded Spirts business is growing following the 2021 acquisition of Luxco, a top spirits producer, bottler, supplier, and importer as well as the 2023 acquisition of Penelope Bourbon, known for its wide range of uniquely blended expressions. Ingredient Solutions delivers nutritional, functional wheat- and pea-based ingredients aligned with consumer trends. The company operates in locations across the Midwestern U.S., and overseas in Northern Ireland and Mexico. THE OPPORTUNITY As the Distillery Process Engineer (Biofuel), you will be responsible for enhancing product quality, safety, and manufacturing efficiency by addressing and resolving daily process challenges. Drive sustainable improvements in cost-effectiveness and product performance through the optimization of manufacturing processes, leveraging capital projects, statistical analysis, designed experiments, and procedural changes. Lead continuous improvement initiatives at the site, utilizing tools such as Zero-Based Analysis (ZBA), GAP analysis, and time studies. Collaborate with cross-functional teams to solve problems and develop new products. Oversee the startup of new products and equipment, including supervising installation, troubleshooting initial production issues, ensuring new processes and products meet requirements, and documenting and transferring them to production. WHAT YOU WILL BE DOING: DISTILLERY OPERATIONS 35% • Oversee daily operations at the Atchison facilities within the Distillery operations to ensure system performance, availability, and reliability targets are consistently met. • Provide troubleshooting and technical support as needed to address operational issues. • Monitor system performance for deviations from targets and offer guidance on corrective actions. • Develop and maintain standard operating procedures to ensure consistent and efficient plant operations. ENGINEERING 30% • Maintain and create new piping and instrumentation diagrams, as well as other flow diagrams, to ensure accurate process documentation. • Support the implementation of expense and capital projects, providing necessary technical documentation and oversight. • Lead the site's continuous improvement initiatives, including managing and updating the GAP analysis and ZBA program. QUALITY 15% • Troubleshoot quality issues and implement corrective actions to maintain high standards of product quality. SAFETY 13% • Provide technical support and expertise for MGP Safety Up and individual safety subcommittee activities. • Monitor and support SEM (Safety, Environment, and Maintenance) suggestions to enhance safety practices. • Participate in incident investigations and assist in the implementation of corrective actions. SHIFT SUPERVISION 2% • Serve as a relief shift manager when necessary to ensure uninterrupted plant operations. Managing hourly employees and ensure the consistent implementation of plant directives to maintain smooth production facility operations. WHO WE ARE LOOKING FOR: Bachelor's of Science in Chemical Engineering (required). 5+ years ethanol plant experience with deep knowledge of milling, cooking, fermentation, distillation and dryhouse operation process technologies, 2+ years of project management experience. Experience using Microsoft Office (Excel, Word, PowerPoint, and Outlook). Experience with AutoCAD and SAP preferred but not required. Strong leadership, coaching and interpersonal skills. Excellent verbal and written communication skills Good problem solving and project management skills Detail-oriented, collaborative, safety-focused, and ready to grow. Frequent exposure to plant environments (wet floors, noise, temperature variations) Must be comfortable with physical tasks like climbing, maneuvering in tight spaces, and occasional lifting If the above speaks to you, we're excited to learn more about you! At MGP, we know that our people are our greatest strength. With different perspectives and unique ways of thinking, our employees are as varied as our products. We believe that inclusivity strengthens the organization and champions a company culture that is evolving to reflect all of us. Culture results from our behaviors, our personal commitment, our curiosity, how we collaborate, and the ways we courageously share our perspectives and expect others to do the same. Each of us can make a difference by fostering thinking and actions that empower us to connect, belong and grow together. Compensation is competitive and is commensurate with experience. MGP offers exceptional medical, dental, vision, short and long-term disability, life insurance, 401(k) Match and PTO. All successful candidates for this position will be required to submit to a criminal background check and drug test.

MGP Ingredients is a leading supplier of premium distilled spirits and food ingredient solutions. Its Distilling Solutions segment provides bourbons, whiskeys, ryes, gins, and vodkas to craft and multinational brands. MGP's own Branded Spirts business is growing following the 2021 acquisition of Luxco, a top spirits producer, bottler, supplier, and importer as well as the 2023 acquisition of Penelope Bourbon, known for its wide range of uniquely blended expressions. Ingredient Solutions delivers nutritional, functional wheat- and pea-based ingredients aligned with consumer trends. The company operates in locations across the Midwestern U.S., and overseas in Northern Ireland and Mexico. THE OPPORTUNITY As the Distillery Process Engineer (Biofuel), you will be responsible for enhancing product quality, safety, and manufacturing efficiency by addressing and resolving daily process challenges. Drive sustainable improvements in cost-effectiveness and product performance through the optimization of manufacturing processes, leveraging capital projects, statistical analysis, designed experiments, and procedural changes. Lead continuous improvement initiatives at the site, utilizing tools such as Zero-Based Analysis (ZBA), GAP analysis, and time studies. Collaborate with cross-functional teams to solve problems and develop new products. Oversee the startup of new products and equipment, including supervising installation, troubleshooting initial production issues, ensuring new processes and products meet requirements, and documenting and transferring them to production. WHAT YOU WILL BE DOING: DISTILLERY OPERATIONS 35% * Oversee daily operations at the Atchison facilities within the Distillery operations to ensure system performance, availability, and reliability targets are consistently met. * Provide troubleshooting and technical support as needed to address operational issues. * Monitor system performance for deviations from targets and offer guidance on corrective actions. * Develop and maintain standard operating procedures to ensure consistent and efficient plant operations. ENGINEERING 30% * Maintain and create new piping and instrumentation diagrams, as well as other flow diagrams, to ensure accurate process documentation. * Support the implementation of expense and capital projects, providing necessary technical documentation and oversight. * Lead the site's continuous improvement initiatives, including managing and updating the GAP analysis and ZBA program. QUALITY 15% * Troubleshoot quality issues and implement corrective actions to maintain high standards of product quality. SAFETY 13% * Provide technical support and expertise for MGP Safety Up and individual safety subcommittee activities. * Monitor and support SEM (Safety, Environment, and Maintenance) suggestions to enhance safety practices. * Participate in incident investigations and assist in the implementation of corrective actions. SHIFT SUPERVISION 2% * Serve as a relief shift manager when necessary to ensure uninterrupted plant operations. Managing hourly employees and ensure the consistent implementation of plant directives to maintain smooth production facility operations. WHO WE ARE LOOKING FOR: * Bachelor's of Science in Chemical Engineering (required). * 5+ years ethanol plant experience with deep knowledge of milling, cooking, fermentation, distillation and dryhouse operation process technologies, 2+ years of project management experience. * Experience using Microsoft Office (Excel, Word, PowerPoint, and Outlook). * Experience with AutoCAD and SAP preferred but not required. * Strong leadership, coaching and interpersonal skills. * Excellent verbal and written communication skills * Good problem solving and project management skills * Detail-oriented, collaborative, safety-focused, and ready to grow. * Frequent exposure to plant environments (wet floors, noise, temperature variations) * Must be comfortable with physical tasks like climbing, maneuvering in tight spaces, and occasional lifting If the above speaks to you, we're excited to learn more about you! At MGP, we know that our people are our greatest strength. With different perspectives and unique ways of thinking, our employees are as varied as our products. We believe that inclusivity strengthens the organization and champions a company culture that is evolving to reflect all of us. Culture results from our behaviors, our personal commitment, our curiosity, how we collaborate, and the ways we courageously share our perspectives and expect others to do the same. Each of us can make a difference by fostering thinking and actions that empower us to connect, belong and grow together. Compensation is competitive and is commensurate with experience. MGP offers exceptional medical, dental, vision, short and long-term disability, life insurance, 401(k) Match and PTO. All successful candidates for this position will be required to submit to a criminal background check and drug test.

Bonnell Aluminum is looking for a self-motivated Process Manufacturing Engineer for the Carthage, Tennessee facility, who will report to the Engineering Manager. Ideal candidate will develop an effective working relationship with the area department manager to facilitate coordination and prioritization of work for that area of responsibility. The work will involve projects related to process, productivity, cost, safety and quality improvements. Must be ready to work as part of a team and independently as needed. PRIMARY RESPONSIBILITIES: Duties and Tasks/Essential Functions: Technology and Process Area Expert Develop in-depth technical understanding of the operation and maintenance requirements for the equipment and process. Develop capital project process and execution expertise. Develop user-level expertise in current and future ERP/MES (Enterprise Resource Planning/Manufacturing Execution System) Responsibilities/Scope/Complexity Must demonstrate a strong commitment to safety procedures and lead or be involved in identifying and implementing safety improvement ideas. Ability to use work breakdown structure to effectively manage small and large projects. Support operations in reviewing equipment efficiencies, downtime, and scrap. Make recommendations for improvements to equipment and operating procedures to improve productivity. Provide technical and engineering support in the ongoing operation and maintenance of existing equipment. Provide oversight of vendors and contractors as needed for specific projects. Makes decisions within known work processes and make recommendations for improvements using a data-based approach (Sig Sigma, Lean, etc.). Ability to run routine data analysis. Positive and productive interactions with internal and external customers and suppliers. Continuous Improvement (Operational Excellence) Ownership and execution of continuous improvements in the area of responsibility, which will include collaborative development of a prioritized list of CI projects for each process and sub-processes for each technical area. Execution of Continuous Improvement projects based on Division, Plant and Area of Responsibility targets/goals. Tracking and overall facilitation of focused activities relating to: Safety Risk Reductions Quality Improvements Productivity Improvements Cost Reductions - Annual area cost reduction, tracking and auditing Revenue Enhancements Capability Improvements General Efficiency Improvements (Time, Inventory, Motion, Waiting, Over Processing, Defects) Lean Events (Project, Kaizen, Burst, Do-it) Facilitate Lean Events Conduct Team Member training Key resource for area team leaders, including team leader CI training Overall event scheduling and coordination Use of the DMAIC process for continuous improvement projects Responsible for all project status briefs and report-outs. Responsible for collecting, evaluating, prioritizing, and executing waste stoppers submittals from operators and recommending for possible recognition. Capital Project Management Capital justifications for small/large projects Project write-up and submittal Technology Specifications Construction/Installation Management Contractor Management Start-up and Commissioning Operations Training & Qualification Systems, Safety, Quality, Productivity, and Reliability assessments and mitigations REQUIREMENTS Educational and Experience Requirements Must have a Mechanical Engineering degree or similar discipline from an accredited college with a GPA equivalent to or greater than 3.0 on a 4.0 scale. 5-7 years of experience in maintenance, engineering, and/or technical activities in a manufacturing environment. Knowledge of Paint Line, Anodizing, Casting, and Aluminum Extrusion processes are desirable. Familiarity with PLCs and various machine programming languages required; ability to program machines desirable. Automation and robotics experience is a plus. Lean Six Sigma Green Belt or Black Belt desirable Ability to travel as required Skills/Knowledge Subject Matter Expert - Developing subject matter knowledge and expertise Leadership - Developing leadership skills Critical Thinking - Tactical critical thinking Work Process Management - Learning roles and processes Communication Skills - Ability to communicate effectively verbally and written, including presentations. Required Tools/Software Knowledge Microsoft Office suite including Word, Excel, Outlook and PowerPoint Project Management Software Quality Companion and Minitab Working knowledge of J.D. Edwards data queries would be a plus AutoCAD modeling and drawing creation COMPENSATION: Salary: Based on experience and degree Employee Benefits: Paid Vacation Medical, Dental and Life Insurance 401 (K) plan On-site Clinic On-site Fitness Center

NAME OF EMPLOYER: Akzo Nobel Coatings Inc. Process Engineer (Controls Specialized) 1431 Progress Avenue, High Point, NC 27215 HOURS: Full Time/40 hours JOB DUTIES: Perform Root Cause Analysis on chronic product problems and implement corrective/preventive actions which result in meeting plant goals. Monitor process performance through metrics such as RFT, MME, OEE, cost productivity, customer complaints, Waste Indices and act as required to correct adverse trends, performing plant-based process investigations. Identify, design, coordinate and employ statistical evaluations utilizing the ASQ Body of Knowledge including MSA, DOE, Capability Analysis, and Root Cause Analysis. Provide quality and manufacturing support as required to meet specific program needs. Assist in developing and implementing plant-wide Quality Management System (QMS). Assist in specification development and/or changes as requested. Actively deploy ALPS foundations and ALPS Quality Management primary processes, with high priority. Provide expertise for on-site operations group during process related troubleshooting issues, being hands-on with production operators/quality techs. For capital projects, executes process studies, contributes to pre-projects and performs initial project scoping and business case development, handing over to project group for execution (except minor projects, REQUIREMENTS: Bachelor's degree or equivalent in Mechanical Engineering, Controls Engineering, Chemical Engineering or Process Engineering or related field of study and 5 years of progressive experience with any combination of CI (Continuous Improvement), Process Engineering and Controls Engineering, with 1 year in industrial coatings and chemical manufacturing processes. Applicants must have demonstrated experience with: 1) working with chemicals used in industrial coatings and chemical manufacturing, and the machinery and computer systems that support coatings and chemical manufacturing. 2) Six Sigma and Lean experience. 3) SAP or ERP experience. 4) execution use of Safe Work Permit (PTW), Management of Change (MOC), and OSHA Process Safety Management (PSM) requirements. Applicants who are interested in this position should submit a complete resume to ******************* reference Job Code: #AC0217. Or apply directly.

**City** Greensboro **Role Type** Permanent **WHO WE ARE** ITG Brands is the third-largest tobacco company in the USA with offerings of some of the most well-known cigarette, cigar, and e-vapor brands. As a member of the globally recognized Imperial Brands PLC family, we are a forward-thinking partner with operational integrity. ITG Brands is committed to putting consumers at the center of what we do, while creating an innovative workplace where inclusion, creativity, and bold thinking drive progress. This empowers us to bring our true selves to work, to collaborate more effectively through showing our passion and being confident to bring new ideas to the table. We are not afraid to seize opportunities and make things happen - both individually and collaboratively. We strive to exceed expectations by seeing things differently and doing things differently. This truly is a place where we all share a challenger mindset which drives our success. **What You Will Do** - JOB SUMMARY Eliminate Losses in the supply chain, OEE, Waste, Quality, speed, brand and reduce Tobacco/NTM waste through structured root cause analysis & standardization. Results: - Overall Equipment Efficiency improvement through reduction of quality defects, rate losses, process centerline deviations, minor stops, and changeover losses - Product Quality Measures (consumer complaints, product and package defects) - Waste minimization through scrap reduction and improved process stability - WHAT YOU WILL DO **Responsibilities:** + Organizes IOS workshops schedule and Agenda + Plans and Schedule the training program + Synchronizes resources: Training window-Trainers-Materials-Machine availability and apprentices + Certification processes coordination + Create operating principles for line training. + Lead the Finished Product Quality (FPQ) Daily Management System for quality factors. + Own process centerline compliance for all Q-Factor standards. + Lead Startups and New Initiatives Qualification including IQ, OQ, and PQ. + Coordinate resources to develop standards for new initiatives (SOPs, critical maintenance procedures, Q-Factor audits, troubleshooting guides, skills matrices, step-up cards). + Lead chronic loss elimination across waste, scrap, quality incidents, and consumer claims. + Build team capability in technical troubleshooting for process failures. + Manage rapid changeover methodology for brand changes. + Own standardized equipment and the change management system for the assigned process. + Serve as engineering's primary point of contact for technology and platform-related topics. + Provide structured feedback to design and engineering. + Maintain a comprehensive Loss Map related to this role. + Training provider management (Assessment, quotation, purchases, payments, agenda, etc.) **Training / Skills - Category A:** + Machine Safety - Job Safety Analysis + FPQ, Centerlines, Q-Factors + Centerlines Daily Management System + Tobacco and material waste reduction + Chronic loss elimination, RCA, Focused Improvement + Machine operating principles + Validation: IQ / OQ / PQ **Training / Skills - Category B:** + Ability to provide structured feedback to design + Laser Focus Boards + Reliability Engineering tools (FMEA) + Autonomous Maintenance (AM) steps **Qualifications** - REQUIRED MINIMUM QUALIFICATIONS: + Ability to lead cross-functional teams + Excellent communication and documentation skills + Ability to prioritize effectively in a high-speed manufacturing environment + Associate's degree in Mechatronics Engineering, Electronic, Electromechanics, or equivalent experience. + Recently graduated is an option. + 1-5 years of experience in manufacturing, process engineering, quality engineering, or related fields + Spend more than 70% of time on the production floor + Become the designated process expert for assigned manufacturing area **Work Environment and Physical Demand** **What We Offer** - Competitive benefits package that includes medical/dental/vision/life insurance/disability plans - Dollar for dollar 401k match up to 6% and 5% annual company contribution - 15 Company-paid holidays - Generous paid time off - Employee recognition and discount programs - Education assistance - Employee referral bonus program **Applicant Information** This describes the essential functions of the job at the time the was created, but it is not an exhaustive list of tasks, duties and responsibilities. In addition, the position may evolve or change over time and such changes may not be reflected in the job description until it is next updated. **ITG Brands and ITG Cigars provides equal employment opportunities.** All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. If you have a concern about discrimination in the application or hiring process or you need an accommodation based on religion, disability or pregnancy in the application or hiring process, please contact us at ******************************* . **SHARE THIS JOB** The posting for the position for which you are applying highlights key aspects of the position only. It is not a complete description of the position. All candidates must consent to an independent investigation of their background, references, past employment, education, criminal record, and drug screening. Results of such background checks will be reviewed on a case-by-case basis, giving consideration to the nature of the information reported and its relevance to the specific job being sought before a decision is made using this information. ITG Brands and ITG Cigars provides equal employment opportunities. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. If you have a concern about discrimination in the application or hiring process or you need an accommodation based on religion, disability or pregnancy in the application or hiring process, please contact us at ******************************* (Talen%74Acquisition%40%69t%67b%72ands.%63om) . We collect personal information from you in connection with your application for employment with ITG Brands or ITG Cigars. For more information, please see our Privacy Policy (****************************************** . If you are a job applicant from California, additional information can be found on our California Applicant Privacy Notice (******************************************************* . If you have questions, contact us atprivacy@itgbrands.com (priv%61%63y@i%74gb%72ands.co%6D) .

JOIN US AND "CREATE YOUR VISION" PRIME LINE - POWERED BY S&S ACTIVEWEAR Prime Line, the hard goods division of S&S, brings promotional product distributors top products in the best-selling categories. Backed by high achieving commercial groups, Prime Line is here to service every need a customer may have. ABOUT US S&S Activewear is a leading North American, tech-enabled specialty distributor of imprintable apparel, including t-shirts, fleece, athletic wear, headwear, workwear, scrubs and accessories. We pride ourselves on being the "critical link" that enables our 100+ brand partners such as Adidas, Columbia and Gildan to reach our hyper-fragmented base of customers, comprised of apparel decorators, eRetailers and promotional products distributors that embellish apparel items for diverse end consumer use cases (e.g., everyday wear, concerts, fitness attire, life events, team sports, etc.). At S&S, we differentiate in the market through a customer service focus, strategic product portfolio, world-class distribution infrastructure, a collaborative growth culture and a relentless focus on technology and innovation. Our success has compounded since the Company's humble beginnings in 1988 as a regional t-shirt distributor to a leading, multi-billion-dollar value-added distribution platform that drives market penetration for our suppliers while enabling the growth, operations and fulfillment for a diverse range of customers across channels and business sizes. We strive to be the apparel distributor of choice while inspiring and fostering growth for customers, employees and suppliers through our core values of service, deep relationships, innovation, continuous improvement and accountability. ABOUT THE ROLE We are seeking a detail-oriented and innovative Process Engineer to join our growing team in Gaffney, SC. This position is primarily responsible for overseeing and optimizing CO₂ laser ablation processes on drinkware, while also supporting and improving digital printing (including 4CP and Direct to Film), pad printing, silk screen, and embroidery operations for a wide range of promotional products including bags, drinkware, stress relievers, towels, and blankets. The ideal candidate will bring strong technical knowledge, hands-on experience with laser and digital/DTF printing systems, and a continuous improvement mindset to support high-quality and efficient decoration processes across multiple product lines. SCHEDULE Monday-Friday, Full-time, Exempt Hybrid - Gaffney, SC WHAT YOU WILL DO * Lead and optimize the CO₂ laser ablation process for drinkware decoration, ensuring consistent quality and productivity. * Support and improve digital printing processes on drinkware and other substrates, including Direct to Film (DTF) printing. * Troubleshoot issues related to print quality, adhesion, color matching, and equipment performance in digital and DTF processes. * Evaluate and integrate new digital printing technologies to expand capabilities and improve efficiency. * Support and improve pad printing, silk screen printing, and embroidery operations for various promotional items. * Develop and implement process documentation, work instructions, and standard operating procedures (SOPs). * Train operators on digital, and conventional printing processes and best practices. * Collaborate across departments to ensure manufacturability and adherence to specifications. * Maintain and improve safety standards and ensure compliance with company and regulatory requirements. * Analyze process data to develop KPIs to drive continuous improvement and lean manufacturing initiatives. WHAT WE'RE LOOKING FOR To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required: * Bachelor's degree in mechanical engineering, Manufacturing Engineering, Industrial Engineering, or a related field. * Minimum of 2 years of hands-on experience with CO₂ laser systems in a production or R&D environment. * Strong understanding of laser-material interactions, especially with drinkware substrates. * Experience with decorative processes such as pad printing, silk screening, and embroidery. Preferred: * Experience in the promotional products or decorated apparel industry. * Experience in production floor layout and equipment integration. * Working knowledge of CAD/CAM and RIP software related to digital printing. * Six Sigma or Lean Manufacturing certification or experience. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or listen. Working Environment This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Reasonable accommodation may be made to enable people with disabilities to perform the essential functions. Equal Opportunity Employer S&S Activewear welcomes people of all backgrounds and experiences and are committed to creating a diverse culture and supporting human growth. We are proud to be an equal opportunity employer and is committed to providing equal opportunity for all employees and applicants. We conduct business without regard to sex, race, creed, color, religion, marital status, national origin, citizenship status, age, pregnancy, sexual orientation, gender identity or expression, genetic information, disability, military status, status as a veteran, or any other protected characteristic. Our policy is to recruit, hire, train, promote, assign, transfer, and terminate employees based on their own ability, achievement, experience and conduct and other legitimate business reasons. S&S participates in E-Verify and will provide the federal government with your Form I-9 information to confirm you are authorized to work in the U.S. This job offer is contingent upon the completion of a satisfactory background check.

We are seeking a Process Engineer for our First Quality Print & Packaging facility located in Anderson, SC. This position provides technical leadership on assigned production platforms. With Product Development, Production, Planning, Quality Assurance, Maintenance, and Project Engineering, provides technical leadership and support to achieve required new products and product improvements; manufacturing cost & quality improvements; and manufacturing equipment utilization, reliability, speeds, scrap rates, and efficiency goals. Primary responsibilities include: Works closely with Production, Planning, QA, & Maintenance to meet daily production goals, priorities, coverage and special projects. Provides technical leadership for continuous improvement projects on his/her assigned lines for improvements in efficiency, scrap, speeds, quality, and safety. Overall platform process owner for Press & Extrusion Supports all machine and product upgrades. Provides technical training to operators and maintenance as needed. Leads and/or assists PD & QA on new product / process improvement and materials trials on his/her assigned production lines while minimizing production impacts. Supports PD and material trials, by planning and participation if needed. Maintains, audits, and updates as needed “Good Run” documentation, ensuring process conditions and measurements are defined, documented, and shared with operators. Reviews product specifications and BOM's for accuracy. Works closely with platform leader on his/her assigned lines to provide focused daily direction and technical support to crews and maintenance. For new lines/equipment within his/her assigned technology, may lead the process definition on new production lines and major equipment and the start-up, ensuring all process “Good Run” conditions and measurements are defined, documented, and shared with operators. Ensures world class safety and company procedural compliance in all processes. Helps to maintain plant 5s standards Performs other duties as necessary when directed to do so. Follows necessary GMPs to comply with regulations (SQF). Conducts job in a manner which complies to the food safety program (SQF). The ideal candidate should possess the following: Bachelor's degree in Industrial or Mechanical Engineering or similar program. In lieu of a degree, equivalent years of experience will be considered. Three years of experience in the flexographic packaging industry preferred. Possesses training in SPC, DOE, and Applied Problem-Solving techniques and has demonstrated successes applying these tools. Has strong personal computer proficiency with MS Office, statistics, and design of experiments software. Has experience with production results reporting systems, AutoCAD, and Manufacturing Execution Systems. Advanced knowledge of the manufacturing requirements for production operations. Standard knowledge of Material Requirements Planning (MRP), Total Quality Control (TQC), and Capacity Requirements Planning (CRP). Standard knowledge of O.S.H.A. laws and regulations within the manufacturing field. Strong communication skills and ability to communicate to all levels of the organization. Advanced comprehension of the machinery and mechanical functions of the operation. Strong problem-solving skills in aiding the efficiency of the operation. First Quality is committed to protecting information under the care of First Quality Enterprises commensurate with leading industry standards and applicable regulations. As such, First Quality provides at least annual training regarding data privacy and security to employees who, because of their role specifications, may come in to contact with sensitive data. First Quality is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, sexual orientation, gender identification, or protected Veteran status. First Quality is committed to protecting information under the care of First Quality Enterprises commensurate with leading industry standards and applicable regulations. As such, First Quality provides at least annual training regarding data privacy and security to employees who, as a result of their role specifications, may come in to contact with sensitive data. First Quality is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, sexual orientation, gender identification, or protected Veteran status.

We are seeking a Process Engineer for our First Quality Print & Packaging facility located in Anderson, SC. This position provides technical leadership on assigned production platforms. With Product Development, Production, Planning, Quality Assurance, Maintenance, and Project Engineering, provides technical leadership and support to achieve required new products and product improvements; manufacturing cost & quality improvements; and manufacturing equipment utilization, reliability, speeds, scrap rates, and efficiency goals. Primary responsibilities include: * Works closely with Production, Planning, QA, & Maintenance to meet daily production goals, priorities, coverage and special projects. * Provides technical leadership for continuous improvement projects on his/her assigned lines for improvements in efficiency, scrap, speeds, quality, and safety. * Overall platform process owner for Press & Extrusion * Supports all machine and product upgrades. * Provides technical training to operators and maintenance as needed. * Leads and/or assists PD & QA on new product / process improvement and materials trials on his/her assigned production lines while minimizing production impacts. * Supports PD and material trials, by planning and participation if needed. * Maintains, audits, and updates as needed "Good Run" documentation, ensuring process conditions and measurements are defined, documented, and shared with operators. * Reviews product specifications and BOM's for accuracy. * Works closely with platform leader on his/her assigned lines to provide focused daily direction and technical support to crews and maintenance. * For new lines/equipment within his/her assigned technology, may lead the process definition on new production lines and major equipment and the start-up, ensuring all process "Good Run" conditions and measurements are defined, documented, and shared with operators. * Ensures world class safety and company procedural compliance in all processes. * Helps to maintain plant 5s standards * Performs other duties as necessary when directed to do so. * Follows necessary GMPs to comply with regulations (SQF). * Conducts job in a manner which complies to the food safety program (SQF). The ideal candidate should possess the following: * Bachelor's degree in Industrial or Mechanical Engineering or similar program. In lieu of a degree, equivalent years of experience will be considered. * Three years of experience in the flexographic packaging industry preferred. * Possesses training in SPC, DOE, and Applied Problem-Solving techniques and has demonstrated successes applying these tools. * Has strong personal computer proficiency with MS Office, statistics, and design of experiments software. Has experience with production results reporting systems, AutoCAD, and Manufacturing Execution Systems. * Advanced knowledge of the manufacturing requirements for production operations. * Standard knowledge of Material Requirements Planning (MRP), Total Quality Control (TQC), and Capacity Requirements Planning (CRP). * Standard knowledge of O.S.H.A. laws and regulations within the manufacturing field. * Strong communication skills and ability to communicate to all levels of the organization. * Advanced comprehension of the machinery and mechanical functions of the operation. * Strong problem-solving skills in aiding the efficiency of the operation. First Quality is committed to protecting information under the care of First Quality Enterprises commensurate with leading industry standards and applicable regulations. As such, First Quality provides at least annual training regarding data privacy and security to employees who, because of their role specifications, may come in to contact with sensitive data. First Quality is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, sexual orientation, gender identification, or protected Veteran status. First Quality is committed to protecting information under the care of First Quality Enterprises commensurate with leading industry standards and applicable regulations. As such, First Quality provides at least annual training regarding data privacy and security to employees who, as a result of their role specifications, may come in to contact with sensitive data. First Quality is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, sexual orientation, gender identification, or protected Veteran status.

The Project Engineer provides engineering and project management support for the Project Manager, the Director of Engineering, and the Engineering Manager, as required. Support the Project Manager in managing engineering projects. Work with project requestors to define initial requirements for the projects. Determine appropriate budget source for the projects - capital or expense. Develop preliminary Return-On-Investment (ROI) analysis of potential/conceptual projects. Design, budget, draft, Visio-chart, and schedule conceptual projects in MS Project for projects under $50,000. Paperwork - Purchase Orders, Change Orders, Cost Control Tracking, Invoicing, etc., to completely track projects, from Initiation to Closure. Review and reconcile project cost tracking with accounting to reconcile and close the projects, in a timely manner. Utilize the Project SharePoint site to implement and manage projects for all team member access. Continuously review and update construction and material specifications and standards documents to meet/exceed SQF/ODA quality improvement expectations throughout the plant. Supervises engineering projects at the direction of the Project Manager Guides engineering projects from scoping and approval, through implementation and completion. Serves as owner representative in the management of engineering construction projects. Works with production and other customer departments to complete projects. Provide consistent and comprehensive status reports, project updates and ongoing cost analyses, significant issue tracking. Supports the Project Manager and Director of Engineering with annual capital budget preparation. Communicate effectively. Work under pressure, meet deadlines, and be flexible in working on multiple projects simultaneously. Act as a team player and be able to interact with staff at all levels of the company. Qualifications BS in Mechanical or Industrial Engineering. 5 to 10 years of Project Management experience in a manufacturing environment. Must have completed at least 3 medium-sized capital projects from inception through completion in a food processing/manufacturing environment. Project management in engineering or construction firms serving the food and dairy industries. Lean manufacturing experience Demonstrated experience managing capital projects, researching and evaluating new manufacturing technology, and building new manufacturing facilities. The company offers competitive compensation and benefits Candidates must be authorized to work in the United States More details regarding the company and position will be shared with candidates who meet the requirements set forth by the company. Thank you in advance for your interest and cooperation. Additional Information All your information will be kept confidential according to EEO guidelines.

Our client is a food processing/ manufacturer that is growing in size and needs to hire an energetic, career-focused Project Engineer to join their team in the Portland, Oregon area. Job Description The Project Engineer provides engineering and project management support for the Project Manager, the Director of Engineering, and the Engineering Manager, as required. Support the Project Manager in managing engineering projects. Work with project requestors to define initial requirements for the projects. Determine appropriate budget source for the projects - capital or expense. Develop preliminary Return-On-Investment (ROI) analysis of potential/conceptual projects. Design, budget, draft, Visio-chart, and schedule conceptual projects in MS Project for projects under $50,000. Paperwork - Purchase Orders, Change Orders, Cost Control Tracking, Invoicing, etc., to completely track projects, from Initiation to Closure. Review and reconcile project cost tracking with accounting to reconcile and close the projects, in a timely manner. Utilize the Project SharePoint site to implement and manage projects for all team member access. Continuously review and update construction and material specifications and standards documents to meet/exceed SQF/ODA quality improvement expectations throughout the plant. Supervises engineering projects at the direction of the Project Manager Guides engineering projects from scoping and approval, through implementation and completion. Serves as owner representative in the management of engineering construction projects. Works with production and other customer departments to complete projects. Provide consistent and comprehensive status reports, project updates and ongoing cost analyses, significant issue tracking. Supports the Project Manager and Director of Engineering with annual capital budget preparation. Communicate effectively. Work under pressure, meet deadlines, and be flexible in working on multiple projects simultaneously. Act as a team player and be able to interact with staff at all levels of the company. Qualifications BS in Mechanical or Industrial Engineering. 5 to 10 years of Project Management experience in a manufacturing environment. Must have completed at least 3 medium-sized capital projects from inception through completion in a food processing/manufacturing environment. Project management in engineering or construction firms serving the food and dairy industries. Lean manufacturing experience Demonstrated experience managing capital projects, researching and evaluating new manufacturing technology, and building new manufacturing facilities. The company offers competitive compensation and benefits Candidates must be authorized to work in the United States More details regarding the company and position will be shared with candidates who meet the requirements set forth by the company. Thank you in advance for your interest and cooperation. Additional Information All your information will be kept confidential according to EEO guidelines.