Parts Inspector

Top Parts Inspector Skills

Below we've compiled a list of the most important skills for a Parts Inspector. We ranked the top skills based on the percentage of Parts Inspector resumes they appeared on. For example, 10.9% of Parts Inspector resumes contained Car Parts as a skill. Let's find out what skills a Parts Inspector actually needs in order to be successful in the workplace.

The six most common skills found on Parts Inspector resumes in 2020. Read below to see the full list.

1. Car Parts

high Demand
Here's how Car Parts is used in Parts Inspector jobs:
  • Inspected bathroom faucets and car parts, racked and packed car parts, ran a buffing machine.
  • Provided costumer service to dealer ships of pending payments or nonpayments of warranty car parts submitted.
  • Inspected all car parts received for warranty worth, and report all infractions to Chief Mechanics.
  • Shipped and received all car parts via UPS / FedEx, and overseas Nippon freight.
  • Inspect car parts before vehicle was made, and shipping and handling
  • Job task included inspecting, wrapping and shipping car parts various companies
  • Inspected car parts to make sure they were functioning before installation.
  • Inspected car parts in a fast-paced industry for GM.
  • Inspected machine or car parts at different manufacturing companies.
  • Inspect car parts that came from the machine
  • Inspected quality and quantity of varies car parts
  • Inspect car parts for Chrysler and GM
  • Check Car Parts for Different Automotive Plants
  • Inspected car parts for multiple companies.
  • Inspected Car Parts for damaged metal
  • Inspect car parts and packing -unpacking
  • Inspect car parts before they go on the line.
  • Inspected electrical car parts and did rewiring on electrical wires.
  • Inspected various rubber car parts for defects Started as part time, was asked back full-time the next summer
  • Inspect Ford car parts Reject damaged parts Mark good parts Fill out paper 1.

Show More

2. Part Inspector

high Demand
Here's how Part Inspector is used in Parts Inspector jobs:

Show More

3. Inspect Parts

high Demand
Here's how Inspect Parts is used in Parts Inspector jobs:
  • Inspect parts to assure great quality and maintain production while preparing packages for shipment.
  • Use PC-DMIS software to operate Coordinate-Measuring Machines to inspect parts with great precision.
  • Run various machines at a fast pace, inspect parts, keep area clean
  • Inspect parts for any cracks or dings before shipped out to customers.
  • Inspect parts before they are sent out to customers.
  • Load and inspect parts for quality and defects.
  • Inspect parts that were brought to my station.
  • Inspect parts to be packaged and sent out.
  • Inspect parts then deliver them to the line
  • Inspect parts for functionality and damage.
  • Inspect parts for defects before shipping.
  • Inspect parts and jig grommets.
  • Inspect parts on various lines ranging from dozer cabs to parts on the paint line.
  • Inspect parts for Mercedes; Contracted with Mercedes through ZF Industries and Faurecia
  • Inspect parts for defects Distribute parts to appropriate location
  • Inspect parts for catapillar look for defaults.
  • Inspect parts for any problems or defects Record defected parts and sort them appropriately Re-package and re-label boxes for shipping
  • Inspect parts prior to shipping Clean parts for quality inspection Package parts for shipping
  • Inspect parts for catapillar and vsi for any bad parts or defaults.
  • Test parts - dampers and water pumps ~Inspect parts for imperfection ~Assemble parts for appliances

Show More

4. Auto Parts

high Demand
Here's how Auto Parts is used in Parts Inspector jobs:
  • Check received auto parts against packing slip, repackage and label all containers with inspected auto parts.
  • Inspected auto parts as they arrived at establishment to make sure they were of good quality.
  • Inspect plastic auto parts, fill out QC forms, relabel containers.
  • Worked on production line inspecting and measuring auto parts to ensure quality.
  • Inspected and ensured the quality of auto parts on the line.
  • Examine auto parts for flaws using a three-point inspection system.
  • Inspected, sorted and reworked auto parts for auto manufactures.
  • Worked for there various Michigan companies doing auto parts inspection
  • Inspect auto parts in machine shop prior to shipping
  • Rack auto part onto racks and inspect auto parts
  • Examine and inspected motor vehicle auto parts.
  • Inspect auto parts from conveyor belt.
  • Inspect, test, sort, auto parts Approve assembled parts by visual and measurement tests; rejecting and defective materials.
  • Inspected auto parts for damaged areas Tag and record damaged auto parts for repair
  • Inspected auto parts for defects, paint bubbles, scratches, etc..
  • Inspect auto parts for defect Air blow painting
  • Required to scan pallets of auto parts in, unpacked pallets, inspected parts, repacked pallets and rescanned for shipping.
  • Inspected auto parts to maintain quality products * Maintained proper speed of the assembly line * Operated a gauge machinery
  • Label auto parts * Inspect auto parts * Responsible for regulation of auto windows
  • Inspect auto parts for GM Trim inside door covers when needed Drilling Send inspected parts to designated areas within warehouse

Show More

5. Assembly Line

high Demand
Here's how Assembly Line is used in Parts Inspector jobs:
  • Worked on assembly line and transported to racks for cooling after quality control check.
  • Put auto parts together on an assembly line to be welded by machine.
  • Inspected parts before reaching the assembly line of Hyundai Motor Manufacturing Company.
  • Inspect Toyota Tundra and Tacoma parts before sending them to assembly line.
  • Prepared and inspected radio parts in an assembly line type operation.
  • Maintain a consistent flow of acceptable parts to the assembly line.
  • Transport finished product from assembly line to final inspection via hi-lo.
  • Inspected the fuel injectors while entering the assembly line.
  • Inspected the parts to put on the assembly line.
  • Worked as a team member on an assembly line.
  • Inspected parts for quality coming from assembly line.
  • Inspected parts on auto assembly line for Toyota.
  • Inspected parts off an assembly line
  • Assisted as lead department operator - Machine operator on injection mold assembly line
  • Inspect parts to make sure they did not have any obvious malfunctions Pull parts off assembly line and place in proper container
  • assembled starter motors on an assembly line, worked in quality inspecting and packing up parts for the line
  • Inspected parts efficiently on assembly line to ensure quality control Polish, clean, and sand imperfect parts
  • Cleaned and Inspected parts on the assembly line - Applied powder coating to parts - Fork lift operations
  • Assisted in preperation for parts to enter into an assembly line.
  • Inspect parts for defects * Spot sander * Load assembly line * Maintain a clean and safe work area

Show More

Job type you want
Full Time
Part Time
Internship
Temporary

6. Safety Procedures

high Demand

7. Temp

high Demand
Here's how Temp is used in Parts Inspector jobs:
  • Read specifications to determine setup and prescribed temperature and time settings.
  • Recorded or inspected test data such as weights, temperatures, grades, or moisture content.
  • Compared colors, shapes, textures with color charts, templates, or samples.
  • Work for temporary service inspecting parts for defects, chatter, O.D.
  • Ensured all temperatures on the pumps were correct & clean when necessary.
  • Regulate molding temperature, volume, pressure, and time.
  • Inspected various auto parts through temp.
  • Reason for Leaving: Temporary job
  • Worked as a Temp inspecting parts
  • Recorded inspection and test data such as weights, temperatures, grades and quantities inspected and graded.
  • Used precision measuring instruments, templates, and fixtures to measure dimensions of finished work pieces.
  • Ensured products/ parts were accurate to work orders, specifications, blueprints, and templates.
  • Impact (Temp service) Inspecting automobile parts, packaging and labeling containers.
  • Worked as temp help counting, packaging, and inspecting automotive parts.
  • position was through a temp agency.
  • Worked here through a Advantage temp.
  • worked for hamilton-ryker as a temp were i inspected automotive parts.

Show More

8. Final Inspection

high Demand
Here's how Final Inspection is used in Parts Inspector jobs:
  • Collated components for assembly and final inspection of completed product.
  • Performed final inspection and completed necessary QC documentation.
  • Worked in final inspection on L3 communications line for Apache Helicopters, as well as special Rockwell PCB's.
  • Inspect all incoming materials, perform first piece, in process, and final inspection.
  • Make final inspection on parts from the line.
  • Washed and did final inspection of parts
  • Core Setter Certified Forklift Operator Quality/Final Inspection

Show More

9. Honda

high Demand
Here's how Honda is used in Parts Inspector jobs:
  • Apply and Inspect zinc nickel coating to dip stick tubes and fuel rails for Toyota, Honda, and other automobiles.
  • Inspect seat frames and seat cushions for Honda at Bridge Water before it's sent onto the assembly line.
  • Inspected small parts for Honda vehicles and made sure I write down anything that was wrong with them.
  • Completed required paperwork, had perfect attendance, and traveled all over the state to Honda suppliers.
  • Sorted parts for Honda of America, by going through stock and inventory.
  • Make sure there are no faulty parts being sent to Honda.
  • Inspect parts prior to installation at Honda Manufacturing of Alabama.
  • Audit all parts on different lines for Honda Manufacturing.
  • Inspected parts of Honda manufacturer.
  • Inspect Honda CVR Parts that are made at the GESTAMPING Plant.
  • inspected parts for a honda factory make sure they were free from burrs and was no dents
  • Inspect car parts for Honda manufacture Clean and sanitize work areas Complete required paperwork
  • inspect seats for honda at bridgwater for alliegence staffing also inspect metal at bama warehouse and inspect vinyl for longleaf warehouse

Show More

10. Quality Standards

high Demand
Here's how Quality Standards is used in Parts Inspector jobs:
  • Perform visual inspections, mechanical and functional verification of parts to ensure compliance to set specification and quality standards.
  • Examined products to verify conformance to quality standards.
  • Inspected various automotive parts for visual and or functional defects according to TMMI quality standards, on sight at TMMI
  • Inspected all products made by the company to verify that they met quality standards and specifications.
  • Inspected parts to make sure that they met quality standards for certification.
  • Inspected and sorted automotive manufacturers' parts by ISO-9001 quality standards.
  • Record any observations of the qualiy of the parts and removes all parts that did not meet quality standards.
  • Maintain quality standards by approving incoming materials, in-process production, and finished products; recording quality results.
  • Inspected lightbulb parts for defects insuring that all parts met quality standards Operated multiple machines and performed regular maintenance on them

Show More

11. GM

high Demand
Here's how GM is used in Parts Inspector jobs:
  • Work as part of a quality team to inspect GM car parts.
  • Inspect auto parts before there put out too GM Company
  • Prepared and inspected parts for GM.
  • Make independent judgments for subjective calls.
  • Mix catalysts and coloring pigments.
  • Inspect various parts for GM.
  • Ensured that all of the windshield wiper motors worked properly on the GM cars and trucks
  • Position as a parts inspector for GM and their product the 2017 Chevy Cruise.
  • Inspected parts for GM and CLI until TFT lost contract .

Show More

12. Defective Parts

high Demand
Here's how Defective Parts is used in Parts Inspector jobs:
  • Recognized and removed defective parts without error.
  • Examine returned parts for defects, and exchange defective parts or refund money.
  • Documented and replaced defective parts, then repackaged to ship to customer.
  • Inspected automobile parts, fixed and discarded defective parts, inventory
  • Marked and discarded defective parts to be returned for reworking.
  • Identified defective parts and reported the issues to supervisors.
  • Eliminate production of defective parts and products.
  • Communicate with co-workers on defective parts.
  • Rejected defective parts and marked types of defects on parts, containers of parts, and inspection tags.
  • Inspected incoming parts from suppliers for GM ~ Repaired defective parts
  • Identified defective parts and served as a department currier.
  • Extracted defective parts from production Organized parts inventory Streamlined inspection process

Show More

13. Production Problems

high Demand
Here's how Production Problems is used in Parts Inspector jobs:
  • Notified supervisors and other personnel of production problems and complications.
  • Notified supervisors or other personnel of production problems.

Show More

14. Toyota

high Demand
Here's how Toyota is used in Parts Inspector jobs:
  • Inspected automotive parts to be shipped to Toyota for the production of vehicles.
  • Inspected car seats for Ford, Chrysler and Toyota cars.
  • Inspect parts to be ship to toyota plant
  • Inspected windows before and after they were ran on line Inspected brakes and struts Inspected Toyota emblems Inspected air conditioner lines

Show More

15. Transmission Parts

average Demand
Here's how Transmission Parts is used in Parts Inspector jobs:
  • 48150Measured and inspected transmission parts for functionality and to be manufactured to blueprint specifications.
  • Inspected and gauged used transmission parts to ensure size, roundness, and degree of wear were within Chrysler's specifications.
  • Inspected and organized defective transmission parts in order to improve and provide continuous assembly flow.
  • Inspected various car transmission parts.
  • Detailed inspections of transmission parts, use of micrometer for measurements of fresh counterbores, inspect dimensions of parts for accuracy

Show More

16. Measure Materials

average Demand
Here's how Measure Materials is used in Parts Inspector jobs:
  • Inspect, test, or measure materials, products, installations, or work for conformance to specifications.
  • Inspect, test, or measure materials or products being produced.
  • Inspect, measure materials, print and read labels.

Show More

17. Chrysler

average Demand
Here's how Chrysler is used in Parts Inspector jobs:
  • Suspected Parts for Ford/Chrysler/GM, checked parts for quality and safety, and made sure parts were shipped out on time.
  • Secured bolts on car seats for Chrysler, removing and making sure parts are functional.
  • Inspected interior door panels for Ford Fiesta, Chrysler 200 and Dodge Avenger.
  • Inspect parts for Chrysler headlamps to make sure they were up to standards.
  • Worked at Chrysler plants as an outside contracted quality inspector.
  • Inspected parts for Chrysler, General Motors and Ford.
  • Repair Door/headliners Manually repaired linings inside Chryslers Jeep Cherokee.

Show More

18. Aircraft Parts

average Demand
Here's how Aircraft Parts is used in Parts Inspector jobs:
  • Inventory aircraft parts and enter info into computer system
  • Performed inspection of aircraft parts and components then packaged out to clients.
  • Inspected aircraft parts after they are machined.
  • Maintain the Aircraft Parts Department.
  • Inspect incoming and outgoing engine, and aircraft parts Adhere to the Company's quality standard
  • Contracted through Personnel Management Inc., Noblesville, IN)Inspected automobile and aircraft parts, Kept records.

Show More

19. Inspection Results

average Demand
Here's how Inspection Results is used in Parts Inspector jobs:
  • Communicate sort/inspection results to managers, supervisors and production source.
  • Recommended necessary corrective actions, based on inspection results.
  • Documented inspection results by completing reports and logs; summarized re-work and waste; inputted data into quality database.
  • Communicated inspection results and disposition of parts with vendors, management, production, and inventory control department.
  • Addressed inspection results with supervisors for products, and recommended corrective actions as ordered.
  • Documented inspection results by completing reports and logs; summarizing re-work and waste.
  • Discussed inspection results for products, and recommended corrective actions if needed.
  • Discussed inspection results with those responsible for products and performed corrective actions.
  • Maintained complete and accurate records of inspection results.
  • Documented inspection results by completingreports and logs; summarizing re-work and waste;inputting data into quality database.
  • Assigned to BridgeWater Manufacturing Warren, MI) - Discuss inspection results with those responsible for products.

Show More

20. Reject Products

average Demand
Here's how Reject Products is used in Parts Inspector jobs:
  • Discard or reject products, materials, or equipment not meeting specifications.

Show More

21. Part Numbers

average Demand
Here's how Part Numbers is used in Parts Inspector jobs:
  • Inspected airplane parts, enter part numbers and information into computer and print ID tags.
  • Recorded data (quantity and part numbers) of inspected parts on to spreadsheets.
  • Log all part numbers, lot numbers, quantity and tool numbers.
  • Assemble and complete formalities compliant with car parts and part numbers.
  • Verified part numbers and placed parts in appropriate shipping containers.
  • Enter all part numbers and lot numbers on daily log.

Show More

22. Data Entry

average Demand
Here's how Data Entry is used in Parts Inspector jobs:
  • Packaged parts.- Counted tiny parts.- Pulled orders from warehouse.- Data entry.
  • Inspect parts, shipping & receiving, data entry.
  • Inspect finished parts at fast pace, rack parts, drack parts, labeler, data entry, and material handler
  • Assembled, inspected and tested D2500 Turbine Engines Reassembled D25000 Turbine Engines Data Entry of all information during testing inspection
  • Meter Tester Data Entry, End of Day reports Communicate with Vendors
  • Assessed merchandise for defects Computed data entry Developed attention for detail Filled orders

Show More

23. Test Cases

average Demand

24. Engine Parts

average Demand
Here's how Engine Parts is used in Parts Inspector jobs:
  • Inspected various different diesel engine parts
  • Perform quality testing for engine parts, test calibration, inspect parts for accuracy, maintain records for defective parts.
  • Performed QC and Black light MT inspections on internal engine parts for heat and fatigue cracking as per company specifications.
  • Perform visual and dimensional inspection on a wide variety of complicated turbine engine parts and assemblies.
  • Inspect and load transmission and engine parts.
  • Inspected Engine parts for Ford Motor Company
  • Clean and inspect engine parts.
  • Inspect small engine parts, make sure they are in workable condition for machine like lawnmowers,weed eaters etc.
  • Inspected and sorted new vehicle and engine parts Assembled line production for various companies
  • Engineered Progams for Engine Parts for Transmission & Structures ,Shafts ,Turbine Wheel Departments .

Show More

25. Meeting Specifications

average Demand
Here's how Meeting Specifications is used in Parts Inspector jobs:
  • Rejected or re-graded products not meeting specifications.

Show More

26. Nissan

average Demand
Here's how Nissan is used in Parts Inspector jobs:
  • Position entailed sorting, inspecting, re-packaging and documentation of non-usable parts for the Nissan assembly plant.
  • Packed said parts and shipped them out to other Nissan factories.
  • Inspected Nissan car parts to insure no abnormalities.
  • Checked Nissan automotive parts for defects.
  • Identified part defects for Nissan automobiles.
  • Inspected car parts for Nissan.
  • guaranteed product integrity and safety requirements for Nissan vehicle products
  • Worked as parts inspector and assembly line assistant for Nissan of Smyrna, TN through Atco Industries.
  • help at Nissan in Canton, MS. Contract position; hired permanently with ATCO Industries.
  • Inspect, And assemble car parts for Ford, Nissan,chrsyler Dodge, and Mercedes
  • Inspected auto parts after coming off assemble lineInventory controlWorked at several different factories including the Nissan warehouse.

Show More

27. Production Operations

average Demand
Here's how Production Operations is used in Parts Inspector jobs:
  • Observe and monitor production operations and equipment to ensure conformance to specifications and make or order necessary process or assembly adjustments.
  • Monitored production operations to ensure production standards were met.
  • Observed and monitored production operations and equipment.
  • Observe and monitors production operations and equipment to ensure proper assembly of parts, or assists in testing and monitoring activities.

Show More

28. BMW

average Demand
Here's how BMW is used in Parts Inspector jobs:
  • Received, processed, and inventoried BMW warranty parts.
  • Inventoried BMW components using a worldwide network computer system.
  • Performed parts inspection for the warranty department on all BMW Rolls-Royce and Mini Cooper also sorted for remanufacturing and shipping
  • Involved with shipping and distribution of BMW parts, following strict timelines.
  • Inspect Mercedes and BMW parts Detect cracks, dents, and splits in parts
  • inspect and package parts to be used on bmw autos and mersades.

Show More

29. Company Standards

average Demand
Here's how Company Standards is used in Parts Inspector jobs:
  • Inspected auto parts for General Motors products ensuring that all parts were free of defects and constructed according to company standards.
  • Examined and measured items for dimensional accuracy, fit, alignment, functional operation, company standards.
  • Inspected, labeled and packaged products according to size, conformation and company standards.
  • Inspect plant products and parts to ensure they are meeting company standards.
  • Inspected parts to company standards.

Show More

30. Hand Tools

low Demand
Here's how Hand Tools is used in Parts Inspector jobs:
  • Be able to use hand tools power tools and the measurement such as micrometer or vernier
  • Seal containers or materials, using glues, fasteners, nails, and hand tools.
  • Used grinders and other hand tools
  • Blueprint assembled dozer cabs using torque wrenches, various hand tools and hoists.
  • File or finish surfaces of workpieces, using prescribed hand tools.
  • Operated grind wheel and bead-blasting machine Inspected parts for quality assurance before shipment Worked with power/hand tools to accomplish tasks
  • Assembled hydraulic manifold parts -Stocked Shelves -Packaged parts -Used Koening guns and other various hand tools -Helped maintain clean and workable environment

Show More

31. CNC

low Demand
Here's how CNC is used in Parts Inspector jobs:
  • Operate and maintain a Mazak cnc mill.

Show More

32. Ensure Conformance

low Demand
Here's how Ensure Conformance is used in Parts Inspector jobs:
  • Conduct inspections to ensure conformance with specific engineering drawings and / or established quality standards.
  • Marked items for acceptance and rejection, compared finding with specifications to ensure conformance to standards.
  • Inspected 960 automobile car seat systems to ensure conformance to safety Functionality and comfort standards.
  • Examine and inspect automotive materials and finished parts for product defects Ensure conformance with work orders

Show More

33. Test Procedures

low Demand

34. Adjustment Methods

low Demand

35. Small Parts

low Demand
Here's how Small Parts is used in Parts Inspector jobs:
  • Worked independently reviewing small parts to ensure quality Quickly and efficiently completed tasks
  • Inspect car parts for any defects; Assemble small parts for cars; Detect and record all bad parts for all cars
  • Examine small parts under a microscope or computer lens for imperfection.
  • Inspected and packed small parts for the automotive industry.
  • Fixed and repaired small parts, decks, air, and mold marks.
  • Fabricated large and small parts per drawing and assembled parts required..

Show More

36. Proper Assembly

low Demand
Here's how Proper Assembly is used in Parts Inspector jobs:
  • Indentified and ensured correction of improper assembly of part

Show More

37. FAA

low Demand
Here's how FAA is used in Parts Inspector jobs:
  • Inspected work performed by avionics technicians to ensure that it conformed to Code of FAA Federal Regulations and proper specifications.
  • Composed all company avionics field approved 337s for part 145 and 135 operations and submitted paperwork to the FAA.
  • Inspect FAA documents to determine trace from point of origin to purchaser.
  • performed repair per FAA CMM guide.

Show More

38. Moisture Content

low Demand

39. Acceptance-Rejection Status

low Demand
Here's how Acceptance-Rejection Status is used in Parts Inspector jobs:
  • Mark items with details such as grade or acceptance-rejection status.BMW Parts Inspector
  • Mark items with details such as grade or acceptance-rejection status.

Show More

40. Vehicle Parts

low Demand
Here's how Vehicle Parts is used in Parts Inspector jobs:
  • Produced vehicle parts for Toyota.
  • Inspected vehicle parts Packaged and sorted vehicle parts

Show More

41. Plastic Parts

low Demand
Here's how Plastic Parts is used in Parts Inspector jobs:
  • Inspect Plastic parts for all types of vehicles and i also drove forktruck and package material and shipped it out.
  • Inspect plastic parts and packed them in boxes.I left to better myself.

Show More

42. Measurement Tests

low Demand
Here's how Measurement Tests is used in Parts Inspector jobs:
  • Approved in-process production by confirming specifications; conducted visual and measurement tests; communicated required adjustments to production supervisor.
  • Approved finished products by confirming specifications; conducted visual and measurement tests; returned products for re-work; confirmed re-work.
  • Provided quality assurance by conducting visual and measurement tests on incoming materials, in- process production, and finished products.

Show More

43. Machine Operation

low Demand

44. Unacceptable Materials

low Demand
Here's how Unacceptable Materials is used in Parts Inspector jobs:
  • Approved incoming materials by confirming specifications; conducting visual tests; rejecting and returning unacceptable materials.
  • Required to reject and report any unacceptable materials.
  • Approved incoming materials by confirmingspecifications; conducting visual and measurementtests; rejecting and returning unacceptable materials.

Show More

45. Quality Checks

low Demand
Here's how Quality Checks is used in Parts Inspector jobs:
  • Perform quality checks on products and parts.
  • Preformed quality checks on parts.
  • Record inspection and quantities inspected.Assembler01/1991 - 10/2013 Caterpillar Industries Summerville, SC Perform quality checks on products and parts.

Show More

46. Customer Service

low Demand
Here's how Customer Service is used in Parts Inspector jobs:
  • Provide quality customer service to help facilitate customer satisfaction.
  • Provide exceptional customer service to individuals placing orders.
  • Ensured high quality of customer service.
  • provide exellent customer service, making sure every customer has a great fufilling experience.

Show More

47. Place Parts

low Demand
Here's how Place Parts is used in Parts Inspector jobs:
  • Place parts in correct box with plastic bag or tube with correct order count.
  • Place parts in machine to be washed, before visual inspection.
  • Rework or replace parts required to restore item to serviceability.
  • Attach printed results and place parts in correct place.
  • Place parts inside assembly molds for processing.

Show More

48. Customer Specifications

low Demand
Here's how Customer Specifications is used in Parts Inspector jobs:
  • Inspected the finished products for quality and adherence to customer specifications.
  • Performed quality sorts according to customer specifications.
  • Inspected products such as blooms, bars, sheets, castings and strips for conformity to customer specifications.
  • Instructed operators for changes to machines to comply with customer specifications.

Show More

49. General Labor

low Demand
Here's how General Labor is used in Parts Inspector jobs:
  • General Labor: Inspecting break line tubing for abnormalities.
  • General labor, cleaning parts and preparing parts for shipment

Show More

50. Medical Parts

low Demand
Here's how Medical Parts is used in Parts Inspector jobs:
  • Inspected and cleaned medical parts, machine operator and operated a forklift.
  • Help with packaging, written documentation, and shipping of medical parts.
  • Trimmed and inspected medical parts for defects.
  • Operate heavy machinery to carry out welding/cutting/deburring of medical parts.
  • Inspected small medical parts for defects -Handled shipping/packaging using microscopes

Show More

20 Most Common Skill for a Parts Inspector

Car Parts14.2%
Part Inspector13%
Inspect Parts12%
Auto Parts9.8%
Assembly Line8.6%
Safety Procedures7.7%
Temp4.4%
Final Inspection4%

Typical Skill-Sets Required For A Parts Inspector

RankSkillPercentage of ResumesPercentage
1
1
Car Parts
Car Parts
10.9%
10.9%
2
2
Part Inspector
Part Inspector
10%
10%
3
3
Inspect Parts
Inspect Parts
9.2%
9.2%
4
4
Auto Parts
Auto Parts
7.6%
7.6%
5
5
Assembly Line
Assembly Line
6.6%
6.6%
6
6
Safety Procedures
Safety Procedures
5.9%
5.9%
7
7
Temp
Temp
3.4%
3.4%
8
8
Final Inspection
Final Inspection
3.1%
3.1%
9
9
Honda
Honda
2.9%
2.9%
10
10
Quality Standards
Quality Standards
2.6%
2.6%
11
11
GM
GM
2%
2%
12
12
Defective Parts
Defective Parts
1.9%
1.9%
13
13
Production Problems
Production Problems
1.5%
1.5%
14
14
Toyota
Toyota
1.4%
1.4%
15
15
Transmission Parts
Transmission Parts
1.4%
1.4%
16
16
Measure Materials
Measure Materials
1.4%
1.4%
17
17
Chrysler
Chrysler
1.4%
1.4%
18
18
Aircraft Parts
Aircraft Parts
1.3%
1.3%
19
19
Inspection Results
Inspection Results
1.3%
1.3%
20
20
Reject Products
Reject Products
1.3%
1.3%
21
21
Part Numbers
Part Numbers
1.2%
1.2%
22
22
Data Entry
Data Entry
1.2%
1.2%
23
23
Test Cases
Test Cases
1.1%
1.1%
24
24
Engine Parts
Engine Parts
1.1%
1.1%
25
25
Meeting Specifications
Meeting Specifications
1.1%
1.1%
26
26
Nissan
Nissan
1%
1%
27
27
Production Operations
Production Operations
1%
1%
28
28
BMW
BMW
0.9%
0.9%
29
29
Company Standards
Company Standards
0.9%
0.9%
30
30
Hand Tools
Hand Tools
0.9%
0.9%
31
31
CNC
CNC
0.8%
0.8%
32
32
Ensure Conformance
Ensure Conformance
0.8%
0.8%
33
33
Test Procedures
Test Procedures
0.8%
0.8%
34
34
Adjustment Methods
Adjustment Methods
0.8%
0.8%
35
35
Small Parts
Small Parts
0.7%
0.7%
36
36
Proper Assembly
Proper Assembly
0.7%
0.7%
37
37
FAA
FAA
0.7%
0.7%
38
38
Moisture Content
Moisture Content
0.7%
0.7%
39
39
Acceptance-Rejection Status
Acceptance-Rejection Status
0.7%
0.7%
40
40
Vehicle Parts
Vehicle Parts
0.6%
0.6%
41
41
Plastic Parts
Plastic Parts
0.6%
0.6%
42
42
Measurement Tests
Measurement Tests
0.6%
0.6%
43
43
Machine Operation
Machine Operation
0.6%
0.6%
44
44
Unacceptable Materials
Unacceptable Materials
0.6%
0.6%
45
45
Quality Checks
Quality Checks
0.6%
0.6%
46
46
Customer Service
Customer Service
0.5%
0.5%
47
47
Place Parts
Place Parts
0.5%
0.5%
48
48
Customer Specifications
Customer Specifications
0.5%
0.5%
49
49
General Labor
General Labor
0.5%
0.5%
50
50
Medical Parts
Medical Parts
0.5%
0.5%

13,662 Parts Inspector Jobs

Where do you want to work?