Full Time Patrick Air Force Base, FL jobs - 2,956 jobs

Department:Public Works Department Organizational Unit:Roadway and Bridge Position Type:Permanent Full Time/Part Time:Full Time Open Until Filled. $18.21 to $20.03 hourly. Actual salary negotiable based on experience and qualifications. South Area/Palm Bay. Work schedule is Monday through Friday 7:00 a.m. to 3:30 p.m. and may include evenings, weekends, and holidays. Performs experienced service work operating light automotive vehicles or equipment and performing routine automotive service andmaintenance. REQUIREMENTS: Six (6) months of experience operating light motor vehicles and/or Public Works equipment used to maintain roads, drainage, sidewalks, and landscaping. Additional qualifying education and/or experience may be substituted on a year for year basis. SPECIAL REQUIREMENTS:Must possess, or obtain prior to employment, a valid Florida Class B Commercial Driver's license and maintain said license during the term of employment. This job involves heavy physical labor performed outdoors with exposure to dirt, noise, fumes, traffic, moving heavy equipment, and extreme weather conditions. In the event of a hurricane, major storm, or any natural or man-made disaster threatening the area, the employee will be required to perform emergency duties as directed. PHYSICAL REQUIREMENTS CHECKLIST (With or without reasonable accommodations) PHYSICAL ACTIVITIES / TRAITS The employee must be able to: LIFT:50 lbs. or more CARRY:50 lbs. or more PUSH:50 lbs. or more PULL:50 lbs. or more In an eight hour day, the employee may have to: STAND:5 - 8 hours WALK:5 - 8 hours SIT:5 - 8 hours DRIVE:5 - 8 hours The employee must repetitively perform: Fine manipulation (ex. writing, wiring); Operating foot controls; Pulling; Pushing; Simple grasping (ex. pen, screwdriver) The employee must be able to: Balance; Bend; Climb; Dig; Jump; Kneel; Reach; Stoop The employee must have: Color Perception; Good distant vision; Good hearing; Good near vision; Good speech; Use of both eyes Other necessary physical activities/traits Must be able to lift sandbags weighing 75 pounds and lifting concrete bags weighing 95 pounds. WORKING CONDITIONS Working conditionsthat will apply to the employee: At heights above/below ground level; Below ground level (ditches, tunnels, etc.; In cold; In dampness or chilly conditions; In heat; In high humidity; In or with dusty conditions; In or with moving objects or vehicles; In or with noisy conditions; On or with ladders or scaffolding; On slippery or uneven walking surfaces; With chemicals or solvents; With feet, legs or hands in water; With fumes, smoke, gases or flames; With grease; With lawn grasses, plants, etc.; With odors; With oils; With vibrations (jackhammers, etc.); Work alone; Work outside; Works Closely with Others Other working conditions: N/A

Job Type: Full-Time Pay: $60,000 $75,000 per year Schedule: 8-hour shifts Weekend availability preferred Dragoneer Empire is expanding in the Palm Bay, FL market and is hiring motivated individuals for a Field Sales Representative role. This position is designed for people who want to build real-world sales experience, grow professionally, and advance based on performance not tenure. You'll work directly in assigned neighborhoods, engaging homeowners face-to-face to educate them on available products and services. With hands-on training and daily coaching, you'll develop communication, negotiation, and leadership skills that transfer to any career path. Why This Role Wins Fast-track career growth with clear promotion paths Paid training and daily mentorship Skill development in sales, confidence, and leadership Performance-based income with uncapped potential Supportive, competitive team culture Key Responsibilities Conduct in-person outreach in designated Palm Bay territories Educate residents on available products and services Identify customer needs and recommend tailored solutions Build rapport and trust through professional communication Track daily activity and work toward individual and team goals Represent Dragoneer Empire with integrity and enthusiasm What We Offer Earning potential of $65,000 $75,000 per year Paid training and ongoing coaching Performance-based promotions and leadership opportunities Competitive, team-driven work environment Skill development in sales, communication, and leadership Ideal Candidate Comfortable speaking with new people daily Self-motivated and goal-oriented Positive attitude and strong work ethic Open to learning and professional growth Able to work flexible hours, including some weekends Qualified candidates will be contacted by our recruiting team within 48 hours. Apply Now or call ************ to speak with the HR Team directly!

PATROL OFFICER (CERTIFIED) 2025 Certified New Hire Salary $67,876 (Annualized) 2025 FTO Completion $69,763 (Annualized) The general responsibilities of a Patrol Officer include responding to calls for service, enforcing traffic and criminal laws, and operating police vehicles when on routine patrol. II. ESSENTIAL DUTIES AND RESPONSIBILITIES * Engage in interpersonal communications with the public and co-workers by promoting a professional and courteous environment * Participate with co-workers and supervisors in the advancement of the troop's goals and objectives * Complete assigned and self-initiated workloads * Required to efficiently analyze and organize information and evidence obtained during traffic and criminal investigations for prosecution purposes * Deliver emergency services to the public by responding to calls for service safely and promptly and by providing assistance to those in need * Protect the public, co-workers and themselves from harm and injury by following established safety and security practices and by correcting and/or reporting safety and/or security hazards or risks * Responsible for the entire arrest procedure including examining, handcuffing, conducting a field search and guarding the arrestee to prevent escape or suicide * Required to exercise discretion in the use of deadly and non-deadly force * Required to arraign a defendant, as well as testify in court * Able to make NCIC, DELJIS, SCIC and CAD inquiries and conduct a full traffic collision investigation (i.e., interview witnesses, sketch and measure collision scenes, determine contributing factors and identify violations, etc.) * Enforce motor vehicle laws * Must possess the physical ability necessary to engage in physical confrontations using offensive and defensive tactics to subdue combative subjects * Normally required to work a 12-hour rotating shift and adapt to irregular working conditions * Required to write different types of reports, including traffic reports, summonses and arrest reports * Able to identify public utility problems and report other road hazards * Assist motorists in need of assistance or to perform traffic direction and control * Utilize a variety of equipment in the performance of their job duties, including an automobile, communications center equipment, baton, breath testing instrument, computer terminal, fire extinguisher, flashlight, handcuffs, portable radio, police car radio, radar/laser unit, semi-automatic pistol, shotgun, body armor and photographic equipment * May instruct suspects on the process to obtain an attorney, enforce court orders, respond to civil disputes, and testify in Family Court * Prepare search warrants, collect evidence, and inventory stolen property * May have to stand/walk continuously for more than one-half the work shift and walk on narrow, elevated surfaces * Prepare interdepartmental memorandums and daily operational reports, as well as maintain daily logs * Clean and inspect firearms and perform random equipment inspections * Provides superior customer service to everyone by responding in a courteous and efficient manner III. REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES * Knowledge of laws and departmental rules/regulations/procedures, as well as other resource materials * Knowledge of weapon craft and must demonstrate usable knowledge of court decisions * Skilled in the use of firearms, as well as non-lethal weapons * Able to drive in both emergency and non-emergency conditions * Ability to communicate both orally and in writing, cope with stressful situations and evaluate a situation, respond correctly and apply appropriate discretion and common sense * Ability to provide excellent customer service IV. MINIMUM QUALIFICATIONS * Must be a United States citizen * Must be at least twenty-one (21) years of age * Minimum uncorrected vision not greater than 20/200 in each eye and correctable with lenses to 20/20 in each eye. Able to distinguish between the colors of red, green and amber * Height and weight in proper proportion. Must be in excellent cardiovascular physical condition V. REQUIRED EDUCATION AND EXPERIENCE * One (1) year of satisfactory employment as a full- time Certified Police Officer, two (2) years preferred, clearly indicating the maturity of the applicant. * Bachelor's degree from an accredited college or university; OR Associate's degree from an accredited college/university, or sixty (60) college credit hours, or higher. This may also be ninety (90) quarter credits from an accredited college/university. OR Thirty (30) college credits from an accredited college/university, or forty-five (45) quarter credits from an accredited college/university. In this situation, the applicant must also have two (2) years of active duty military service. VI. LICENSES, REGISTRATIONS, AND/OR CERTIFICATES * Applicant must have a current valid driver's license and at least one (1) year of driving experience. An applicant with a prior driving suspension or revocation must have one (1) year of reinstatement in order to be eligible to apply. Any alcohol- related driving arrests and overall driving history will be subject to review * Certified police officer (an evaluation of all courses and hours completed in the applicant's academy will be evaluated to determine the applicant's eligibility in the selection process) VII. CRIMINAL RECORD AND ACTIVITY * Any felony conviction is an automatic disqualification. Any criminal activity that would be considered a felony under Delaware law or the law of the state in which the activity occurred is a disqualification. Arrests resulting in conviction must be pardoned prior to submitting an application. Applicants are strongly encouraged to apply for an expungement on any past arrests not resulting in conviction. All arrests will be subject to evaluation. VIII. DRUG USAGE * Use of any illegal drug two years prior to application, or any prior use of a hallucinogenic drug, will be an automatic disqualification. All other drug use, including illegally using prescribed drugs, is subject to review. VIII. ADDITIONAL REQUIREMENTS * Candidates for this position will be subject to a background investigation, a pre- employment physical, drug testing, fitness testing, psychological testing, and a medical/criminal polygraph * Delaware River and Bay Authority requires all employees to have direct deposit with a financial institution or enroll in the payroll card program to receive their biweekly pay If you are interested in applying for this position, please complete the on-line application at ************* In addition, you also have the option of attaching a resume to the completed application. The Delaware River & Bay Authority is an Equal Opportunity Employer

Department:Public Works Department Organizational Unit:Roadway and Bridge Position Type:Permanent Full Time/Part Time:Full Time Open Until Filled. $18.88 to $20.77 hourly. Actual salary negotiable based on experience and qualifications. South Area/Melbourne. Work schedule is Monday through Friday 7:00 a.m. to 3:30 p.m. Performs experienced service maintenance work operating moderately complex automotive vehicles or equipment and performing routineautomotive service and maintenance. REQUIREMENTS: One (1) year of experience operating moderately complex automotive vehicles and equipment including ten-wheel dump trucks and tractor mowers, which are used for maintaining transportation infrastructure, including roads, drainage systems, and sidewalks. Additional qualifying education and/or experience may be substituted on a year for year basis. Experience using a work management system that includes tasks such as opening and closing work orders and uploading photo documentation is preferred. SPECIAL REQUIREMENTS: Must possess, or obtain prior to employment, a valid Florida Class B Commercial Driver's license and maintain said license during the term of employment. This job involves heavy physical work and requires exposure to construction debris, moving machinery, traffic, extreme weather conditions, noise, dirt, and dust. In the event of a hurricane, major storm, or any natural or man-made disaster threatening the area, the employee will be required to perform emergency duties as directed. PHYSICAL REQUIREMENTS CHECKLIST (With or without reasonable accommodations) PHYSICAL ACTIVITIES / TRAITS The employee must be able to: LIFT:50 lbs. or more CARRY:50 lbs. or more PUSH:50 lbs. or more PULL:50 lbs. or more In an eight hour day, the employee may have to: STAND:3 - 5 hours WALK:3 - 5 hours SIT:5 - 8 hours DRIVE:5 - 8 hours The employee must repetitively perform: Fine manipulation (ex. writing, wiring); Operating foot controls; Pulling; Pushing; Simple grasping (ex. pen, screwdriver) The employee must be able to: Balance; Bend; Climb; Dig; Jump; Kneel; Reach; Stoop The employee must have: Color Perception; Good distant vision; Good hearing; Good near vision; Good speech; Other; Use of both eyes Other necessary physical activities/traits Must be able to lift sandbags weighing 75 pounds and lift concrete bags weighing 95 pounds. WORKING CONDITIONS Working conditionsthat will apply to the employee: At heights above/below ground level; Below ground level (ditches, tunnels, etc.; In cold; In dampness or chilly conditions; In heat; In high humidity; In or with dusty conditions; In or with moving objects or vehicles; In or with noisy conditions; On or with ladders or scaffolding; On slippery or uneven walking surfaces; With chemicals or solvents; With feet, legs or hands in water; With fumes, smoke, gases or flames; With grease; With lawn grasses, plants, etc.; With odors; With oils; With vibrations (jackhammers, etc.); Work alone; Work outside; Works Closely with Others Other working conditions: N/A

Local Contract Nurse RN - Interventional Radiology - $61 per hour at Trusted Resource Associates (TRA) summary: This position is for a local contract Registered Nurse specializing in Interventional Radiology, responsible for performing diagnostic radiographic procedures and providing technical support under physician supervision. The role requires at least two years of acute care experience and relevant certifications such as ARRT, CPR, and optionally ACLS or CVRT. The assignment is a 13-week, full-time local contract in West Boca, Florida with benefits including weekly pay, holiday pay, and contract security. Trusted Resource Associates (TRA) is seeking a local contract nurse RN Interventional Radiology for a local contract nursing job in West Boca, Florida. Job Description & Requirements Specialty: Interventional Radiology Discipline: RN Start Date: Duration: 13 weeks 40 hours per week Shift: 8 hours, days Employment Type: Local Contract TRA RN, Interventional Radiology TRA is Tenet's in-house nationwide contingent pool for Nursing and Allied travel and local contracts. Receive a greater level of Contract security compared to with an outside agency. The Interventional Radiology Tech, under minimal supervision, performs basic to complex diagnostic radiographic procedures, as requested by a licensed physician. Provide technical support for interventional radiographic examinations. This includes assessing patient condition, operating imaging equipment, preparing examination rooms, and maintaining equipment, supplies, and medications. Perform radiographic exams on all patients as necessary. Employee is responsible for producing high quality diagnostic radiographs, rotates through advanced areas of diagnostic radiology to include OR, Urography, open reductions, myelography, arthrography, placements and trauma; assists practitioner with fluoroscopy, arthrography, OR procedures and trauma BENEFITS Guaranteed hours for Travel Contracts Preferred Booking Agreement for Local Contracts Weekly Pay Holiday Pay Contract Security compared to a contract with an outside agency Preferred Education Formal Two year radiologic technology training in AMA approved school which meets requirements for registry for the ARRT Minimum Experience Must have 2 years of Acute Care Required Certification/Licensure American Registry of Radiologic Technologist (ARRT) (R); (VI) or (CI); or Certified Radiology Tech-CR CPR-Basic Life Support - American Heart Association Other credentialing items, such as a skills checklist and health related documents, which will be specified by your Recruiter. Preferred Certifications - CVRT or PICC Line Certification - ACLS Our Hire Process - We do qualify our clinicians to meet or exceed the minimum requirements of a travel or local assignment. If you are qualified, we may direct-hire you, reducing the time we can get you to work! When you reach out to a TRA Recruiter for more details, ensure your Vivian profile includes your most updated resume! Trusted Resource Associates (TRA) Job ID #. Benefits 401k retirement plan Weekly pay Holiday Pay Referral bonus Keywords: Interventional Radiology Nurse, Registered Nurse RN, Diagnostic Radiography, Radiologic Technologist, Acute Care Nursing, ARRT Certification, CPR Certified Nurse, Local Contract Nursing, Medical Imaging Support, Healthcare Nursing Jobs

RELOCATION ASSISTANCE: No relocation assistance available CLEARANCE TYPE: SecretTRAVEL: Yes, 25% of the TimeDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Please note that this opportunity is contingent on program funding. Start dates are determined after funding confirmation. Northrop Grumman Aeronautics Systems has an opening for an Associate Subcontract Specialist to join our team of qualified, diverse individuals. Location: Full-time Onsite in Melbourne, FL Schedule: 9/80 work schedule - with every other Friday OFF! Team: Global Supply Chain Extras: Opportunities for occasional travel and excellent career growth potential Our Team: This is an opportunity to join a team on the cutting edge of tomorrow's defense technologies. Work onsite in a collaborative and dynamic environment where new challenges are the norm! On-site in Melbourne you will have the opportunity to support our nation's classified, top-priority programs, developing and building our next-generation airborne defense solutions for our country. About the Role: Sources and procures complex, specialized goods and services. Owns contractual management for the supplier. Responsible for subcontract sourcing, proposal evaluation, negotiation, award, execution, administration, and closeout phases. Coordinates and collaborates with key stakeholders such as legal, contracts, finance, planning, operations, program management, engineering, and quality. As part of a cross-functional team, candidate will monitor and manage schedule, cost, technical and quality performance of suppliers in support of US Government programs. Subcontract Specialists will interface with supplier leadership teams to motivate and drive excellence in performance of contractual requirements. Essential Functions: Responsible for subcontract sourcing, proposal evaluation, negotiation, award, execution, administration, and closeout phases Assesses supplier performance and regularly communicates feedback to Supplier Leadership Manages supplier performance throughout the subcontracting lifecycle. Ensures compliance with all FAR, DFARS and public law requirements, as well as company policies and procedures. Identifies strategies and opportunities to reduce cost, improve efficiency and manage risk through strategic and targeted negotiations. Cultivates and maintains strong working relationships with suppliers, customers, and internal stakeholders. Contributes to Program Risk and Opportunity management. Utilizes process tools such as Lean Six Sigma with suppliers to drive quality, efficiency, and continuous improvement. The selected candidate should thrive in a fast-paced work environment with high expectations, significantly diverse assignments, and collaborative team settings across all levels. Basic Qualifications: Bachelor's Degree OR a minimum of 4 years Supply Chain/Business Management experience may be considered in lieu of a degree. Your ability to obtain and/or transfer and maintain the final adjudicated government Secret clearance, and any program access(es) required for the position within a reasonable period of time, as determined by the company Preferred Qualifications: Master's degree in business, Global Supply Chain or Project Management Familiarity of FAR (Federal Acquisition Regulations) and DFARS Experience in Subcontracts, Purchasing, or Contracts Negotiating skills Presentation skills Working level knowledge of Business Law Risk mitigation experience Active, In-Scope DOD Secret Security Clearance or higher that has been granted / renewed within the past 6 years #AS-FA3 Primary Level Salary Range: $54,400.00 - $81,600.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Our Summer Internship Program is meticulously designed to provide students with an immersive and dynamic experience within our industry, offering a taste of what it's like to be part of our professional team. We strive to simulate a full-time job, enabling our interns to work hands-on with cutting-edge technology, contribute to meaningful projects, build strong relationships with coworkers, and develop strategic problem-solving skills. Our program is highly selective, hosting only a handful of interns each year, ensuring personalized attention and ample opportunities to work closely with AV team members. We are hiring for various roles and locations throughout the US, during the interview process we will be able to discuss specific details regarding team and location. Summary As a Software Engineering Intern, you'll be part of a collaborative, multidisciplinary team working on real-world projects across AV technology portfolio. You'll assist in the design, development, and testing of software solutions for a variety of applications - from ground control systems and user interfaces to data pipelines and simulation tools. This role is ideal for someone who's eager to apply their software development skills in a dynamic, hands-on environment, while learning from experienced engineers and contributing to projects with real impact. Position Responsibilities * Assist in the design, coding, testing, and debugging of software components and systems. * Contribute to the development of tools and applications that support AV robotics and aerospace platforms. * Collaborate with engineers across software, hardware, and systems teams to integrate and test new capabilities. * Participate in code reviews, documentation, and the use of version control and defect tracking tools. * Help develop scripts or automation to improve team workflows and efficiency. * Learn and apply best practices in software development processes, including Agile methodologies. * Support the development of prototypes, simulations, and proof-of-concept demonstrations. * Attend team meetings, contribute ideas, and learn to estimate development effort and timelines. Basic Qualifications (Required Skills & Experience) * Currently pursuing a Bachelor's or Master's degree in Computer Science, Software Engineering, or a related field. * Strong foundational knowledge in programming languages such as Python, C++, or Java. * Familiarity with development tools such as Visual Studio, Git, Eclipse, or similar IDEs. * Experience with data structures, algorithms, and software design principles. * Demonstrated problem-solving and analytical skills. * Ability to work both independently and collaboratively in a team environment. * Effective written and verbal communication skills. Preferred Qualifications & Competencies * Experience with software development on Linux, Windows, or cross-platform environments. * Exposure to web technologies, cloud platforms, or backend services is a plus. * Interest in or exposure to robotics, autonomous systems, or data analytics. * Experience using scripting languages (e.g., Bash, Python) to automate tasks. * Knowledge of Agile development practices and version control (e.g., Git). * Curiosity and willingness to learn new technologies and frameworks. * Ability to take ownership of tasks and contribute to team goals. Physical Demands * Ability to work in an office and R&D lab environment (Constant) * Required to sit, type, and use office equipment for extended periods (Frequent) ITAR Requirement: This position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR

Department:Mosquito Control Department Organizational Unit:Countywide Mosquito & Aquatic Weed Ctl Position Type:Permanent Full Time/Part Time:Full Time Open Until Filled. $16.87 to $18.56 hourly. Actual salary negotiable based on experience and qualifications. South Area/Grant/Valkaria/Travels Countywide. Work schedule is Monday through Friday 7:00 a.m. to 3:30 p.m. and may include evenings, weekends, and mandatory overtime. Performs entry level service work in the inspection of mosquito breeding areas, application of pesticides and related maintenance work. REQUIREMENTS: Six (6) months of experience performing manual labor or operating automotive or watercraft which involved keeping simple written records and/or reports; PLUS six (6) months of experience using a personal computer or tablet. Education cannot be substituted for the required experience. SPECIAL REQUIREMENTS: Must possess a valid Florida driver's license and maintain said license during term of employment. Must possess or obtain, within six (6) months of employment, certification as an Arthropod Control Applicator in accordance with the specifications set forth in Florida Statute 388.361(4). Must be physically capable at all times of properly wearing and utilizing the appropriate respiratory protection. Must be able to work extended hours during peak season, mosquito outbreaks, and fires and/or overtime. In the event of a hurricane, major storm, natural or man-made disaster which may threaten the area, the employee will be required to perform emergency duties as directed. This position is part of an established career ladder. PHYSICAL REQUIREMENTS CHECKLIST (With or without reasonable accommodations) PHYSICAL ACTIVITIES / TRAITS The employee must be able to: LIFT:50 lbs. or more CARRY:50 lbs. or more PUSH:50 lbs. or more PULL:50 lbs. or more In an eight hour day, the employee may have to: STAND:5 - 8 hours WALK:5 - 8 hours SIT:5 - 8 hours DRIVE:5 - 8 hours The employee must repetitively perform: Operating foot controls; Pulling; Pushing; Simple grasping (ex. pen, screwdriver) The employee must be able to: Balance; Bend; Climb; Crawl; Dig; Jump; Kneel; Reach; Run; Smell; Stoop The employee must have: Color Perception; Good distant vision; Good hearing; Good near vision; Good speech; Use of both eyes Other necessary physical activities/traits N/A WORKING CONDITIONS Working conditionsthat will apply to the employee: Below ground level (ditches, tunnels, etc.; At heights above/below ground level; In cold; In dampness or chilly conditions; In heat; In high humidity; In or with dusty conditions; In or with moving objects or vehicles; In or with noisy conditions; On or with ladders or scaffolding; On slippery or uneven walking surfaces; Other working conditions; With chemicals or solvents; With feet, legs or hands in water; With fumes, smoke, gases or flames; With hazardous materials; With lawn grasses, plants, etc.; With odors; With oils; With poor lighting; Work alone; Work inside; Work outside; Works Closely with Others Other working conditions: Additional driving for nighttime spray missions for 3-5 hours will be required routinely.

Job Requirements The Clinical Charge Nurse is fully engaged in providing Quality/No Harm, Customer Service and Stewardship by demonstrating leadership through the assessment, planning, implementation and evaluation of patient care according to the standards of professional nursing practice. Nursing care is provided to the individual patient based upon diverse patient demographics and needs. PRIMARY ACCOUNTABILITES Demonstrates effective and safe clinical practice as evidenced by observation and feedback, leader rounding, performance coaching and patient outcomes; actively seeks feedback and performance coaching to improve the experience for patients and families. Resolves or facilitates resolution of patient and family concerns/complaints and serves as a secondary resource to address points of escalation. Recognizes and resolves safety issues and potential unsafe situations within approved policies, procedures, and protocol. Effectively leads shift and post-event huddles; facilitates and leads effective interdisciplinary care transition rounds and planning of care for appropriate utilization, care transitions, and safe disposition. Consistently and effectively demonstrates compliance and monitoring for department service standards such as purposeful hourly rounding, bedside shift report and white board management to enhance communication. Demonstrates an understanding and effective application of staffing effectiveness principles and optimization of resources to meet dynamic patient care needs real time. Demonstrates effective management of unit productivity in a favorable way through good planning, organization and time management (e.g. incremental overtime). Identifies and participates in activities to appropriately improve patient safety, patient throughput, reduce length of stay and prevent readmission. Actively participates and assists in the selection, development and retention of associates and serves as a coach and resource to peers, staff and other healthcare team members; adds positively to creating and sustaining a healthy work environment. Demonstrates effective medication administration provided to patients as evidenced by Preceptor Observation Tool, Skills Fair Demonstration, and Clinical Practice. Demonstrates appropriate delegation and supervision of patient care activities within the healthcare setting. Contributes to the patient experience as evidenced by positive patient satisfaction scores and HCAHPs scores for department/medical center and/or written compliments by patients/others as well as consistent performance of purposeful hourly rounding and bedside shift report. Work Experience MINIMUM QUALIFICATIONS Education: Associate's degree in Nursing or Nursing Diploma. Work Experience: None Licensure: RN Licensure in the State of Florida or endorsement. Certification: American Heart Association Basic Life Support (AHA BLS) Healthcare Provider Completion Card prior to start date and maintained. Must obtain other certification(s) as required by specific unit. Skills/Knowledge/Abilities: Must be able to speak / understand written and verbal instructions in the English language. Must meet unit specific care requirements. Must have ability to work in often stressful environment with patients / families at various ages and levels of understanding. Must have ability to concentrate on multiple priority activities. Must have ability to respond appropriately to life threatening situations. Must have critical thinking and problem-solving skills. Demonstrates dependability, reliability and flexibility. Must have highly developed verbal and non-verbal communication skills. PREFFERED QUALIFICATIONS Work Experience: Two (2) years of relevant clinical experience. Certification: National certification in relevant specialty. * PHYSICAL REQUIREMENTS Physically agile; may require walking, standing, running, bending, stooping, kneeling, climbing, or crouching frequently. May occasionally include lifting or moving objects up to 50 pounds, with or without assistance. May require moving in different positions to accomplish tasks in various environments including tight and confined spaces, including reaching out and above shoulders, or overhead. May lift, turn, pull, push, or ambulate people and/or equipment with or without assistance up to 90% of the assigned shift. May be exposed to inside and outside environments with varied temperatures, air quality, lighting, and/or low to loud noise. May require working with biohazards such as blood/body fluids and airborne particles following OSHA and CDC guidelines. Communicating with others to exchange information. Visual acuity and hand-eye coordination to perform tasks. Workspace may vary from open to confined. May require travel to various facilities within and beyond county perimeter; may require use of personal vehicle. Benefits ABOUT HEALTH FIRST At Health First, diversity and inclusion are essential for our continued growth and evolution. Working together, we strive to build and nurture a culture that recognizes, encourages, and respects the diverse voices of our associates. We know through experience that different ideas, perspectives, and backgrounds create a stronger and more collaborative work environment that delivers better results. As an organization, it fuels our innovation and connects us closer to our associates, customers, and the communities we serve. Schedule : Full-Time Paygrade : 30B

Viera Builders, Inc., a wholly-owned subsidiary of A. Duda & Sons, Inc., has an opening for full-time hourly paid Sales Office Clerical Assistant. Must be available for weekend hours. This role is responsible for providing support to sales managers in their designated community by performing a number of administrative tasks while providing customer service to potential home buyers. This position must be able to arrive at Model Center to ensure everything is in order prior to doors opening at 10 am. Summer hours we are open until 6 pm and winter until 5 pm. Sunday schedule is 12-6 pm summer/5 pm winter. Weekly schedules typically include one weekend day and some holidays. Other responsibilities include: Register all guests in Lasso, including Realtor/Broker information Process Change Orders for Price Increases Prepare the digital map for all communities reflecting sold/open/model/spec Create contract-associated paperwork for submittal Create Profit Analysis for all sales contracts Prepare outstanding Buyer issues for entry into the Team's Sales/Construction board for Monday's team review Take buyers on tour of model homes and homes under construction. Must understand basic construction process/terms A High School diploma or equivalent is required and experience supporting sales or marketing staff is preferred. In addition, the following skills are required: Intermediate skills in Microsoft Office including Word and Excel. Experience with Docusign. Ability to learn quickly new technology/software programs. Present a professional business like appearance. Must be flexible and be available to work one weekend day and some holidays. Strong customer service skills. This position offers our complete package of employee benefits. If you possess these qualifications and are ready to take the next step in your career with an organization that takes pride in its employees and the work that we do in the community, please apply in confidence by sending a cover letter and resume including salary requirements. We offer opportunities for career growth. No agencies please. Duda is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.

Full-time Description Merritt Precision manufactures highly sophisticated plugs for the marine, automotive, and aerospace industries in Merritt Island, Florida. As part of Watershed Innovation, a Correct Craft Company, Merritt Precision provides the high level of quality, service, and confidentiality that customers have come to expect. Through expanded capacity and new technologies, Merritt Precision creates excellent value as part of Watershed Innovation's vision of creating a better tomorrow today. Requirements Key Responsibilities: Running a lamination chop gun Applying spray putty to the plugs Rolling fiberglass once it has been applied Block sanding plugs (dry and wet sand) Using various hand tools as needed Keep work area clean and orderly Inspects all parts so that they are complete and up to quality standards Work in a team environment Must be flexible and willing to cross train within the department. Keep work area clean and orderly. Follow instruction of Manager/Supervisor/Lead Inspects all parts so that they are complete and up to quality standards. Any other duties as assigned by management. Must comply with all OSHA and safety procedures. Qualifications Essential: Able to interpret all work-related documents Excellent time management skills Experienced in taking the best course of action in a manufacturing environment Must be able to work effectively as an individual or with a team Experienced with working with composites Must be able to perform tasks under time constraints Must have strong attention to detail Experience with Hand Tools- Rollers, Fiberglass chop gun, sanders, and scissors Skills and abilities for success in this position · Give full attention to what other people are saying, taking time to understand the points being made, and asking questions as appropriate. · Understand written sentences and paragraphs in work related documents. · Manage one's own time and respecting the time of others. · Consider the relative costs and benefits of potential actions to choose the most appropriate one. · Must be able to work effectively as an individual or with a team. · Must be able to perform tasks under time pressure deadlines. · Must have strong attention to detail. · The ability to communicate information and ideas so others will understand. · The ability to tell when something is wrong or is likely to go wrong. Physical Requirements: Able to lift up to 50lbs as needed Able to work in a non-climate controlled environment Must be able to climb in and out of the plug Able to wear Personal Protective Equipment- Safety Glasses, half-mask respirator, Tyvek protection suit Able to work directly with fiberglass and resin Additional Information Benefits and Perks Competitive benefits: health, dental, vision, and life insurance 401K Plan Paid Holidays Paid Time Off Education Assistance Bonus Incentive Plan Employment Statement Merritt Precision is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law. All your information will be kept confidential according to the Equal Employment Opportunity Commission (EEOC) guidelines.

Job DescriptionMister Sparky is hiring Electrical Apprentices to join our team of skilled and energetic professionals! This is an entry-level opportunity for motivated individuals looking to start a long-term career in the electrical trade. As an Electrical Apprentice with Mister Sparky, you'll work alongside experienced electricians while learning residential electrical repairs, maintenance, and installations. This role includes hands-on training, shadowing, and continuous learning while following all workplace procedures and safety guidelines. We are committed to building long-term relationships with our customers, team members, and community-and we're looking for individuals who are ready to grow with us.Why Mister Sparky? We offer a comprehensive package designed to support your training, growth, and long-term success: Compensation & Stability Paid, on-the-job training Full-time, year-round work Clear career path with opportunities for advancement Benefits That Put You First Choose from HMO, PPO, or HDHP medical plans Immediate access to benefits starting the first of the month after 30 days Paid Time Off (PTO) & paid holidays Life Insurance, Short-Term and Long-Term Disability Health Savings Account (HSA) options Flexible Spending Accounts (FSA) Employee Assistance Program (EAP) 24/7 telehealth services Tools & Perks Hands-on training and mentorship from experienced electricians Ongoing technical and safety training 30% employee discount on our services Supportive work environment focused on teamwork and growth Recognition programs and opportunities for advancement Career Advancement After approximately 9-12+ months, Electrical Apprentices may advance into a Residential Service Electrician role based on performance and training completion. Advancement includes access to additional compensation opportunities, a company take-home vehicle, fuel card, and iPad. As part of Service Minds, alongside Benjamin Franklin Plumbing and One Hour Air Conditioning & Heating-, you'll have access to multiple long-term career paths. What You'll Do As an Electrical Apprentice, you will: Assist licensed electricians with residential electrical repairs, maintenance, and installations Learn to diagnose electrical issues and support troubleshooting efforts Maintain safety standards and follow company policies and procedures Provide professional, respectful customer service in every home Maintain clean work areas and properly manage tools and materials Learn documentation processes using ServiceTitan or similar software What It Takes to Succeed We're looking for apprentices who bring: Strong motivation to learn the electrical trade Positive attitude and strong work ethic Customer-focused mindset Ability to follow instructions and safety guidelines Valid driver's license with a clean driving record Ability to pass a background check and drug screening Reliability, professionalism, and teamwork Why You'll Love Working Here At Mister Sparky, we invest in your future. You'll receive paid training, ongoing support, and a clear path for career advancement in a company that values its people and promotes from within. We're committed to helping you build a stable, rewarding career in the electrical industry. If you're ready to start your electrical career and grow with a company that supports your success, apply today and start building your future with Mister Sparky. Equal Employment Opportunity Mister Sparky is proud to be an Equal Employment Opportunity employer. We celebrate diversity and are committed to building an inclusive, welcoming environment where every employee can thrive. All qualified applicants will receive equal consideration for employment. Disclaimer This description reflects the core responsibilities and qualifications for this position but is not an exhaustive list. Management may revise duties or assign additional tasks as necessary.

Counter-Unmanned Aerial System (C-UAS) Subject Matter Expert Fairwinds is seeking a Counter-Unmanned Aircraft Systems (C-UAS) Subject Matter Expert to join our team and drive mission-critical solutions for defense and homeland security customers. In this role, you will leverage deep technical expertise in C-UAS technologies to support pre-sales engagements, capture strategies, and program execution. As a trusted advisor, you will collaborate with business development teams to shape winning proposals, deliver compelling technical demonstrations, and ensure successful deployment of advanced C-UAS capabilities. This position requires a unique blend of technical acumen, customer engagement skills, and operational experience to help our clients detect, track, identify, and defeat evolving UAS threats. Responsibilities: Support company pursuit and execution efforts related to Counter-UAS (C-UAS) applications. Serve as the technical subject matter expert for Counter-UAS solutions during capture engagements. Translate customer mission requirements into tailored C-UAS system configurations, including radar, RF detection, EO/IR sensors, and mitigation technologies. Support integration of C-UAS solutions into existing defense platforms ensuring interoperability and compliance with DoD standards. Develop technical proposals, system diagrams, and cost estimates aligned with DoD and DHS procurement standards. Conduct or review performance testing under varied operational conditions to validate detection range, accuracy, and response times. Document test results and provide recommendations for system improvements. Analyze emerging UAS threats and tactics; recommend countermeasure strategies. Stay current on adversary drone technologies and evolving counter-drone techniques. Conduct on-site and virtual demonstrations of C-UAS capabilities, including live detection and mitigation scenarios. Ensure adherence to airspace regulations, privacy laws, and rules of engagement. Prepare and deliver technical presentations to senior stakeholders, acquisition officers, and program managers. Support trade shows, industry events, and customer briefings with hands-on system knowledge. Basic qualifications: U.S. Citizenship Active Secret clearance with ability to obtain a Top Secret 10+ years in air defense, EW, UAS/C‑UAS, or closely related mission engineering, military or industry. Demonstrated integration of radar/RF/EO‑IR sensors into an operational Detect, Track, Identify, Defeat (DTID) chain and field validation at test ranges. Demonstrated understanding of UAS platforms Sensor and Detection System Proficiency. Hands-on experience with radar, RF detection, EO/IR sensors, and mitigation technologies used in C-UAS operations. Familiarity with CJADC2 concepts and Common Operating Picture integration (e.g., Tactical Assault Kit), multi‑sensor fusion algorithms, and edge compute tradeoffs. Ability to produce test plans, reports, and briefings consumable by Federal and/or State organizations. Experience with Airspace Security and Aviation Operations Preferred qualifications: Bachelor's degree in Engineering or related STEM discipline. Experience with AI/ML applications for threat detection. Knowledge of DoD acquisition processes and cybersecurity compliance. Experience with open systems (MOSA/SOSA/CMOSS) and interface definition (ICDs, message schemas, API specs). Hands‑on with EW techniques (detection, direction-finding, protocol exploitation, GNSS effects) and effectors. Hands-on experience with C-UAS operational deployment. Location- Targeted recruiting area is in the Delaware, Maryland, Virginia and Florida regions. Business Necessity may require travel up to 25% Compensation- Salary At Fairwinds, we consider many factors when it comes to compensation, including the scope of the position as well as your background and experience. Base pay may vary depending on job-related knowledge, skills, location and experience. Additional incentives may be provided as part of the compensation package, in addition to a range of medical, financial, and/or other benefits. Position Type/Expected Hours of Work This is a full time, exempt position. Work Authorization/Security Clearance: Must be eligible to work in the US. AAP/EEO Statement Fairwinds Technologies, LLC is an Equal Opportunity Employer - M/F/Veteran/Disability/Sexual Orientation/Gender Identity

Benefits: Competitive salary Free uniforms Bonus based on performance URGENTLY HIRING! Rolling Suds is looking for a dedicated and skilled Temporary Power Washing Professional to join our team to complete a large power washing project anticipated to last 6 weeks. You may be extended an offer for Full-Time non-temporary employment at the end of the 6 week period but that conversion is not guaranteed. IMPORTANT: This position will be scheduled to work 40 hours a week with the possibility of up to 10 hours of overtime per week. To be considered for this position, you must have open availability to work any 7 days in a week, but we anticipate you will be scheduled the following days from 7 AM to 5:30 PM: Monday, Tuesday, Wednesday, Saturday (10 hour shifts each day). BONUS: You will receive a $200 bonus upon project completion if all scheduled days are worked. As a Power Washing Professional, you will be responsible for providing excellent service to our customers and completing jobs to the highest standards. No experience is required. Power Washing Professional Benefits and Perks: Opportunities for career growth and advancement Use of company tools, equipment, and vehicles Training and certification programs Promotion from within Safe and secure working environment Variety of projects and tasks Competitive salary and benefits package Power Washing Professional Responsibilities: Work closely with the Lead Technician to ensure jobs are completed efficiently and professionally Follow the proper pressure washing and cleaning procedures Perform tasks in a professional manner Work as a team to complete the job checklist Abide by cleaning procedures checklists Power Washing Professional Qualifications: Ability to climb ladders, walk on roofs, and work on lifts with confidence Ability to perform general labor and carry and lift up to 50lbs Pressure washing experience is preferred but not required Driver's License (Required) If you are looking for a challenging and rewarding career with a company that values its employees, then this is the opportunity for you. Apply now to become a Power Washing Professional and valued member of our team! Compensation: $17.00 per hour Rolling Suds is a company that takes pride in delivering top-quality power washing services to both residential and commercial clients. With over 30 years of experience in the industry, we have built a strong reputation and a loyal customer base. We believe that our success is due to the relationships we have cultivated with our clients, our unwavering commitment to reliability, and our reputation for excellence. At Rolling Suds, we take a customer-first approach, and we are always looking for team members who share our values and commitment to providing exceptional service. If you're interested in joining our team and becoming a part of a company that values hard work, dedication, and excellence, then we invite you to explore our career opportunities today. At Rolling Suds, we invest heavily in our team members and provide extensive training and support. We believe in creating a culture of excellence, where employees are encouraged to develop their skills and take pride in their work. Whether you're a seasoned professional or just starting out, we offer opportunities for growth and advancement. Our team members are given the tools and resources they need to succeed, and we believe in recognizing and rewarding hard work and dedication. Join our team and become a part of a supportive and positive work environment that allows you to thrive. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Rolling Suds Corporate.

Camping World is seeking a Fixed Operations Director to join our growing team. As the Fixed Operations Director you will be responsible for delivering the highest level of customer satisfaction and profitability at our growing Service Center. You will support and manage the Service Manager(s) while driving profitability and ensuring customer satisfaction. What You'll Do: Support and Manage the Service Manager(s) as part of the Fixed Operations team in the location Ensure a consistently high level of internal and external customer satisfaction throughout the service department Drive profitability through increased sales, gross profit, P&L management, and labor cost control Build a high performing team of Technicians, Service Advisors, Parts Associates, Warranty Administrators, Porters, and Detailers through continual associate development and best hiring practices Foster a culture that promotes employee development & retention, customer satisfaction, and philanthropy Create and maintain strong working relationships with external vendors Meet or exceed monthly budget projections Maintain a safe and functional working environment What You'll Need to Have for the Role: Experience managing a high-volume Service Center in the RV, automotive, marine, or power sports industry is strongly preferred Demonstrated ability to ensure a high level of customer satisfaction and profitability in a fast paced, deadline driven environment Knowledge of RV's and RV systems is a plus Strong written and verbal communication skills Proficiency in a dealership software system (ADP, IDS, Reynolds & Reynolds, etc.) Intermediate or better skills in MS Office (Word, Excel, Outlook) Ability to read and analyze P&L reports Valid driver's license required May lift up to 25 lbs and/or move up to 50 lbs. with assistive devices Prolonged periods of standing, stooping, crawling, and bending Exposure to heights and hazards related to working with electrical and welding equipment Environmental conditions include heat, cold, humidity, noise, dust and wetness General Compensation Disclosure The pay range for this role considers several factors in making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs. It is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the factors stated. A reasonable estimate of the total annual compensation range (base pay + variable compensation earned) is $95,000 - $125,000 or more. In addition to competitive pay, we offer Paid Time Off, 401(k), an Employee Assistance Program, Good Sam Roadside Assistance, discounts, paid parental leave (if eligibility is met), Tuition Reimbursement (if eligibility is met), and on the job training opportunities. Full-time associates are offered a comprehensive benefit package including medical, dental, vision and more! Part-time associates are offered access to dental & vision coverage! For more information please visit: ****************************** We are an equal employment opportunity employer. The Company's policy is not to discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, veteran or uniformed service-member status, genetic information, or any other basis protected by applicable federal, state, or local laws.

Full-time Description Job Title: Ophthalmic Technician We are seeking a detail-oriented and compassionate Ophthalmic Technician to join our healthcare team. The ideal candidate will assist ophthalmologists in providing high-quality eye care to patients. This role involves performing various diagnostic tests, maintaining equipment, and ensuring a smooth patient experience. Key Responsibilities: - Assist ophthalmologists during examinations and procedures. - Perform diagnostic tests such as visual acuity tests, tonometry, and retinal imaging. - Prepare and maintain examination rooms and medical equipment. - Document patient history and test results accurately in electronic health records. - Ensure compliance with safety and sanitation protocols. - Skills and Qualifications: - High school diploma or equivalent; certification as an ophthalmic technician preferred. - Strong attention to detail and excellent organizational skills. - Ability to communicate effectively with patients and healthcare professionals. - Proficient in using ophthalmic equipment and technology. - Compassionate and patient-focused approach to care. - Ability to work in a fast-paced environment and manage multiple tasks. We offer a supportive work environment and opportunities for professional development. If you are passionate about eye care and dedicated to providing exceptional patient service, we encourage you to apply. Salary Description Starting at $18.00 an hour

Essential Cabinetry Group is a leader in cabinet manufacturing throughout the U.S., delivering high-quality, customizable cabinetry solutions that blend innovative design with exceptional craftsmanship. Guided by our core C.A.R.E. values-Customer Focus, Accountability, Respect, and Excellence-we are committed to exceeding customer expectations and enhancing the heart of every home we serve. We offer a comprehensive benefits package designed to support our employees' health, well-being, and professional growth. Our benefits include medical, dental, vision, and life insurance, a 401(k) retirement plan with company match, and so much more! We are currently seeking a highly motivated and qualified candidate to fill the role of Manufacturing Supervisor. This full-time, 1st Shift position is based in Rockledge, FL, and offers an exciting opportunity to join our team and contribute to a culture built on quality, integrity, and teamwork. The Manufacturing Supervisor will lead their business unit in developing and executing manufacturing processes to achieve shared objectives across the facility. This role will measure safety, quality, delivery and cost performance while leveraging data to drive continuous improvement efforts for their respective business unit. In addition, the Manufacturing Supervisor is responsible for driving results through efficiency gains, balancing capacity to demand, managing labor, and developing and leading a diverse team. Responsibilities Support the CARE values of the organization. Commit to producing a quality product for our customers. Execute strategies for safety quality, delivery and cost initiatives for respective business unit Actively communicating ECG CARE mission and values Drive customer satisfaction through strict adherence to product specifications ensuring quality specifications are met driving to 100% first pass yields Demonstrate commitment to all safety programs, site specific safety plans and targeted ECG initiatives Manage business unit operating budget; to ensure meet or exceed our financial objectives Identify and implement continuous improvement measures to improve production methods, equipment performance, and quality of product Interpret and enforce company policies, rules, and safety regulations and quality methods to supervisors and employees Plans and aligns; plans and prioritizes work to meet commitments aligned with organizational goals Drive Lean Manufacturing and Six Sigma tools to drive 100% OTC and less than 1.5% on warranty, zero accidents, and exceed HPU budgeted requirements Other duties as assigned. Requirements BS in Manufacturing, Business or a related required; advanced degree or professional manufacturing certification(s) preferred 5+ years leadership experience with a large manufacturing organization Proven track record of building a team, supervising change, streamlining processes and driving safety, quality, delivery and cost improvements Strong working knowledge and application of lean manufacturing principles; furniture industry experience preferred Strong analytical, problem solving, delegation, and conflict resolution skills. Exceptional leadership, interpersonal, and organizational skills. Working Relationship Communication is required across all levels of the organization- executive team, other functional leaders, subordinates and production floor workers. The Manufacturing Supervisor works under the immediate supervision of the General Manager. Physical Requirements Must be able to lift/move in excess of 50 lbs. at a time Stand, walk, stoop, and perform motions for an extended period PPE Safety glasses, ear plugs, and safety shoes are required. Other PPE may be required depending on the role. Safety This position expects to adhere to all safety rules to include the use of all require protective personal equipment (PPE). Specifically, eye and hearing protection must be worn at all times while in the production floor. Work Environment Organization Structure/Career Progression The work environment characteristics described below are representative of those an employee encounters while performing the essential functions of this job: Non-air-conditioned environments; hazardous materials such paints, stains and solvents; machinery, conveyors, spray-booths and drying racks. Equal Opportunity Employer At Essential Cabinetry Group, we believe in the value of your unique identity, background, and experiences. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity, veteran status or any other status protected by the law. Applicants requiring a reasonable accommodation due to a disability at any stage of the employment application process should contact Human Resources.

Department: Public Works Department Organizational Unit: Surveying & Mapping Position Type: Permanent Full Time/Part Time: Full Time Open Until Filled . Survey Field Tech I: $18.05 to $19.86 hourly Survey Field Tech II: $19.52 to $21.47 hourly Survey Field Tech III: $21.94 to $24.13 hourly Survey Field Tech IV: $23.86 to $26.25 hourly Selections for current vacancies will be based upon the candidate's highest level of education/experience/certification. Please see the requirements listed below. Government Center/Viera/Travels Countywide. Work schedule is Monday through Friday 6:30 a.m. to 3:00 p.m. Performs technical field work as part of a survey field crew, work includes loading, carrying, and operating survey instruments, including theodolites, digital levels, Global Positioning System (GPS) equipment, and data collectors with Trimble software; cutting trees and brush for line of sight, measuring distances, and preparing field notes and sketches; performing boundary, topographic, construction layout, as-built, right-of-way control, and hydrographic surveys; performing field survey calculations for monument searches, boundary determinations, sectional breakdowns, and construction layout. REQUIREMENTS: Survey Field Tech I : Six (6) months of field surveying experience; OR one (1) year of civil construction layout experience; OR twenty-four (24) semester hours [thirty (30) quarter hours] of college-level coursework towards a technical degree in Surveying, Engineering, Computer-Aided Design (CAD) Drafting, Mathematics, Geography, Geographic Information System (GIS) Input, or a closely related field. Survey Field Tech II: Eighteen (18) months of survey experience as a member of a field survey crew; OR two (2) years of experience with civil construction layout; OR one (1) year [30 semester (45 quarter) hours = one (1) year] of college-level coursework towards a technical degree in Surveying, Engineering, Computer-Aided Design (CAD) Drafting, Mathematics, Geography, Geographic Information System (GIS), or a closely related field PLUS six (6) months of survey or construction experience. SPECIAL REQUIREMENTS: Must complete, within twelve (12) months of employment, all of the classes for any one (1) phase of the Brevard County Employee Development Program and receive a passing score on the phase examination. Survey Field Tech III: Three (3) years of field surveying experience working under the supervision of a Registered Land Surveyor and Mapper; OR two (2) years [30 semester (45 quarter) hours = one (1) year] of college-level course-work towards a technical degree in Surveying, Computer-Aided Design (CAD) Drafting, Mathematics, Geography, Geographic Information System (GIS), or a closely related field PLUS one (1) year of survey or construction experience. SPECIAL REQUIREMENTS: Must successfully complete, within eighteen (18) months of employment, all of the classes for any two (2) phases of the Brevard County Employee Development Program and receive a passing score on each of the phase examinations. Survey Field Tech IV: Four (4) years of field survey experience working under the supervision of a Registered Land Surveyor and Mapper; OR three (3) years [30 semester (45 quarter) hours = one (1) year] of college-level coursework towards a technical degree in Surveying, Computer-Aided Design (CAD) Drafting, Mathematics, Geography, Geographic Information Systems (GIS), or a closely related field PLUS one (1) year of survey or construction experience. SPECIAL REQUIREMENTS: Must successfully complete, within six (6) months of employment, a FL Survey & Mapping Society Florida Law course and receive a passing score on the associated examination. Must complete, within eighteen (18) months of employment, all of the classes for all three (3) phases of the Brevard County Employee Development Program and receive a passing score on each of the phase examinations. Must successfully complete, within twenty-four (24) months of employment, a Brevard County-sponsored leadership course, including 7 Habits of Highly Effective People, 5 Choices to Extraordinary Productivity, Emotional Intelligence, The Multiplier Effect, What's Your Sign?, or another County-approved leadership course. Additional qualifying education and/or experience may be substituted on a year for year basis for all vacancies. SPECIAL REQUIREMENTS FOR ALL APPLICANTS: Must possess, or obtain prior to employment, a valid Florida driver's license and maintain said license during the term of employment. Must possess, or obtain within nine (9) months of employment, a current Florida Department of Transportation (FDOT) Intermediate Maintenance of Traffic (MOT)/Temporary Traffic Control (TTC) certification, and maintain said certification during the term of employment. Must possess, or obtain within nine (9) months of employment, current documentation of successful completion of an OSHA-compliant Confined Space Entry Training course, in accordance with the requirements of 29 CFR 1910.146. Must successfully complete, within nine (9) months of employment, all of the classes for the Brevard County Mandatory Training for the Development of New Employees. In the event of a hurricane, major storm, natural or man-made disaster that may threaten the area, the employee will be required to perform emergency duties as directed. These positions are part of an established career ladde r. PHYSICAL REQUIREMENTS CHECKLIST (With or without reasonable accommodations) PHYSICAL ACTIVITIES / TRAITS The employee must be able to: LIFT:40 lbs. CARRY:40 lbs. PUSH:40 lbs. PULL:40 lbs. In an eight hour day, the employee may have to: STAND:5 - 8 hours WALK:5 - 8 hours SIT:1 - 3 hours DRIVE:1 - 3 hours The employee must repetitively perform: Fine manipulation (ex. writing, wiring); Pulling; Pushing; Simple grasping (ex. pen, screwdriver) The employee must be able to: Balance; Bend; Climb; Crawl; Dig; Jump; Kneel; Reach; Stoop The employee must have: Color Perception; Good distant vision; Good hearing; Good near vision; Good speech; Use of both eyes Other necessary physical activities/traits N/A WORKING CONDITIONS Working conditionsthat will apply to the employee: In cold; Below ground level (ditches, tunnels, etc.; In dampness or chilly conditions; In heat; In high humidity; In or with dusty conditions; In or with noisy conditions; On slippery or uneven walking surfaces; With chemicals or solvents; With feet, legs or hands in water; With fumes, smoke, gases or flames; With odors; With vibrations (jackhammers, etc.); Work alone; Work inside; Work outside; Works Closely with Others Other working conditions: N/A

The Co-Manager manages the day-to-day operation of the store as a Manager On-Duty in conjunction with the management team members to maximize sales and customer service and oversees the execution of the Merchandising plan to maintain compliance and store standards. Roles and Responsibilities * Maximizes profits and customer service by leading assigned category team and operating the store in adherence with all Company policy and guidelines * Operates the store as the Manager On Duty in conjunction with the management team. * Maintains the physical security of the store they are assigned, and in doing so is a key-holding member of management. * Ensures highest level of customer service and handles customer complaints to a satisfactory conclusion. * Maintains category merchandising and cleanliness and ensures operational efficiency. * Trains and develops Associates and Leads. * Facilitates effective communication to all store Associates through daily briefings and weekly and monthly meetings. * Drops off bank deposit and pick up change order as needed * Picks up café grocery supplies (milk, baked goods, etc.) as needed * Consults with the General Manager on associate performance * Performs other duties as assigned. Scheduling Requirements * All managers follow the 3 or 4 Manager Rotation schedule, depending on the number of managers in the store. * All managers must have open availability and be able to work opening shifts, closing shifts, or other shifts as needed, OR have availability approved by District Manager if open availability is not possible. * All managers are Full Time and may work up to 45 hours per week. Core Competencies * Interpersonal Skills * Team Management and Development * Action Orientation * Strong verbal and written communication skills Qualifications and Education Requirements * 21 years of age or older * High school diploma or equivalent, some college preferred * Previous experience in a supervisor role * Successful completion of all required background screenings Preferred Skills * Computer and cash register skills Physical and Environmental Requirements * Must be able to stand and walk for extended periods of time * Must be able to use hands/arms to operate a keyboard and telephone for repetitive motion activities * Must be able to lift or team lift objects up to 50 lbs., with or without assistance * Must be able to communicate using speech, sight, and sound with or without an assistive device * Must be able to stand, walk, climb, bend, stoop, or crouch while performing daily activities of the job