Technician jobs at Paul Davis USA

About the Role: The Telematics System Analyst is responsible for coordinating all Telematics activities for the Fleet organization. This includes managing hardware installation, reporting requests, driver compliance of logging requirements, geofence management, fuel and mileage reporting for IFTA and IRP, safety alert reporting, and system user management activities. Company Overview With roots dating to 1891 and 8,500+ employees, MYR Group is a publicly traded holding company of 13 specialty electrical construction companies. MYR Group and our subsidiaries work on large-scale electrical construction projects throughout the U.S. and Canada. We contribute to a clean energy future while fostering a safe, supportive, and inclusive work environment. Our culture is built on shared values and mutual respect, where teamwork and collaboration occur naturally. Throughout our history, we have partnered with utilities, municipalities, commercial clients, and developers to deliver some of the largest and most notable projects including transmission/distribution/substation, commercial and industrial, storm restoration, and renewable (solar and wind farms) energy. Essential Functions Device installation and maintenance Manage new device installations Activate and terminate devices Set up and maintain user profiles Troubleshooting Identify non-communicating devices; build appropriate work orders for correction Investigate mileage and hours differences between Fleet data and Telematics Investigate public complains and provide reports Telematics system administration Provide various reports including alerts Reconcile monthly invoicing Ensure ignition sequences are collected on equipment Ensure aerial components collect PTO measurements Develop & deliver employee training on Telematics Any other activities necessary to assist in maintaining accurate and useful Telematics data Regular and predictable attendance Other duties as assigned Essential functions of this position are to be performed at a Company-designated office or field location Understand and comply with the Company's Code of Business Conduct and Ethics Policy and other industry-specific professional and ethical standards About You: Qualifications 1 to 3 years of experience working with Telematics software application Prior experience providing Telematics training and support to users Analytics and reporting experience related to Telematics data Bachelor's or Associate's degree in Information Technology, Computer Science, Business or comparable field preferred; or equivalent combination of education and experience Knowledge/Skills/Abilities Good verbal and written communication skills Good analytical thinking skills Detail oriented with strong problem-solving skills Time management skills Proficiency in MS Office Suite Ability to maintain confidentiality Working knowledge of Fleet operations What We Offer: Compensation & Benefits Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. MYR Group reserves the right to adjust ranges depending on the qualifications of the selected candidate. Two days per week remote work option for non-field roles depending on position and performance. Medical, Basic Vision, Regenexx, Teledoc, Hearing, Mental Health (Low deductibles and out-of-pocket maximums) - Fifteen Dollar weekly premium for employee or employee plus family coverage. Dental - 100% employer-paid premium. ThrivePass Health & Wellness Reimbursement Program - Twelve hundred dollars annually for health and wellbeing-related purchases. Annual Paid Time Off starting at 15 days plus 10 paid Holidays (Cultural Celebration Day is a floating holiday). Generous 401(k) Plan with 100% match up to 6%; immediate vesting, and Annual profit-sharing potential. Superior educational assistance program (support for educational costs, internal training, and more!). Company-paid short and long-term disability, life, and accidental death & dismemberment. Company-paid business travel accident insurance. Employee Assistance Plan (EAP). Various voluntary plans available including supplemental vision, accident and critical illness, ID theft, group legal, group auto & home, and additional voluntary life insurance plans for employees and dependents. Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #apphigh LinkedIn Recruiter Assignment (your initials): #LI-JS1 LinkedIn Location Expansion #: #IN LinkedIn Workplace: #LI-Hybrid

Who are we? Satellite Industries is the world's largest supplier of products to the portable sanitation industry, which includes portable restrooms, handwash units, consumables, deodorizers, vacuum trucks, vacuum technology, unit haulers, restroom, shower, and specialty trailers. Position Summary: The Production Technician 2: PVA works with materials to create a finished product for commercial or industrial use. Please note that this position has a typical schedule of Monday - Thursday, 7am to 6pm. Essential Duties and Responsibilities: Follow checklist for production start-up including: preparing machine for production, ensuring line is ready for production, turning on production equipment including but not limited to: compressor, vacuum, Mattpak, etc. Input work orders into appropriate printers to ensure accurate product marking. Affix product label rolls onto labeling machine. Initiate and monitor the operation of the automated bagging machine. Generate pallet tickets and record pallet information clearly and accurately. Conduct routine quality inspections to ensure product meets Satellite standards and identify and report any quality defects promptly. Count materials and report inventory discrepancies. Understanding work orders and bill of materials and ability to review and sign off on materials as required. Count and stack boxed product(s) in a neat and thorough manner. Move, stack, wrap, and replace pallets on robot. Bag packets into bags utilizing appropriate equipment/machinery. Perform accurate hand-counting of packets. Complete housekeeping duties regularly, following standard operating procedures and operational needs including but not limited to: sweeping, squeegeeing floors, cleaning process equipment, etc. Report waste and scrap materials in an accurate and timely manner. Verify that all materials match the specifications outlined in work orders. Labeling containers to meet customer specifications and federal regulations. Supervisory Responsibilities: No formal supervisory role. Education and Experience Requirements: This position prefers a high school diploma/GED. 3+ years of chemical production experience or the equivalent of training and experience. 3+ years manufacturing equipment operation experience. Required Skills: Proficient understanding of running manufacturing equipment. Intermediate manufacturing experience required. Ability to read, comprehend, and follow written instructions, chemical labels, safety regulations, and company policies, etc. Ability to maintain composure and effectiveness in a high-pressure and fast-paced environment. Technical Capacity. Ethical Conduct. Strong attention to detail. Ability to multi-task and be self-directed while remaining a team player. Excellent communication and teamwork skills. Independent Decision-Making skills. Physical/Mental Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk, read, count, and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, pushing, pulling, climbing ladders, and lifting throughout the day. The employee must frequently lift and/or move items over 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The employee must be able to use the personal protective equipment (PPE) that is determined to be necessary for this position including, but not limited to: respirators with a minimum requirement of N-95, safety-grade gloves, safety-grade eye protection, steel or composite toe shoes, etc. WORK ENVIRONMENT: While performing the duties of this job, the employee will be required to regularly work in a manufacturing environment working with multiple agents and reactants including, but not limited to: fumes, chemicals, airborne particles, moving mechanical parts etc. The noise level is typically moderate but hearing protection may be required. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

Who are we? Satellite Industries is the world's largest supplier of products to the portable sanitation industry, which includes portable restrooms, handwash units, consumables, deodorizers, vacuum trucks, vacuum technology, unit haulers, restroom, shower, and specialty trailers. Position Summary: The Production Technician 2: PVA works with materials to create a finished product for commercial or industrial use. Please note that this position has a typical schedule of Monday - Thursday, 7am to 6pm. Essential Duties and Responsibilities: Follow checklist for production start-up including: preparing machine for production, ensuring line is ready for production, turning on production equipment including but not limited to: compressor, vacuum, Mattpak, etc. Input work orders into appropriate printers to ensure accurate product marking. Affix product label rolls onto labeling machine. Initiate and monitor the operation of the automated bagging machine. Generate pallet tickets and record pallet information clearly and accurately. Conduct routine quality inspections to ensure product meets Satellite standards and identify and report any quality defects promptly. Count materials and report inventory discrepancies. Understanding work orders and bill of materials and ability to review and sign off on materials as required. Count and stack boxed product(s) in a neat and thorough manner. Move, stack, wrap, and replace pallets on robot. Bag packets into bags utilizing appropriate equipment/machinery. Perform accurate hand-counting of packets. Complete housekeeping duties regularly, following standard operating procedures and operational needs including but not limited to: sweeping, squeegeeing floors, cleaning process equipment, etc. Report waste and scrap materials in an accurate and timely manner. Verify that all materials match the specifications outlined in work orders. Labeling containers to meet customer specifications and federal regulations. Supervisory Responsibilities: No formal supervisory role. Education and Experience Requirements: This position prefers a high school diploma/GED. 3+ years of chemical production experience or the equivalent of training and experience. 3+ years manufacturing equipment operation experience. Required Skills: Proficient understanding of running manufacturing equipment. Intermediate manufacturing experience required. Ability to read, comprehend, and follow written instructions, chemical labels, safety regulations, and company policies, etc. Ability to maintain composure and effectiveness in a high-pressure and fast-paced environment. Technical Capacity. Ethical Conduct. Strong attention to detail. Ability to multi-task and be self-directed while remaining a team player. Excellent communication and teamwork skills. Independent Decision-Making skills. Physical/Mental Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk, read, count, and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, pushing, pulling, climbing ladders, and lifting throughout the day. The employee must frequently lift and/or move items over 30 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The employee must be able to use the personal protective equipment (PPE) that is determined to be necessary for this position including, but not limited to: respirators with a minimum requirement of N-95, safety-grade gloves, safety-grade eye protection, steel or composite toe shoes, etc. WORK ENVIRONMENT: While performing the duties of this job, the employee will be required to regularly work in a manufacturing environment working with multiple agents and reactants including, but not limited to: fumes, chemicals, airborne particles, moving mechanical parts etc. The noise level is typically moderate but hearing protection may be required. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Safety Sensitive Position: This position is classified as a safety sensitive position and, as such, is subject to random drug screenings per the Policy Substance Abuse and Drug Free Workplace. PM25

Truck Chassis Assembler Install chassis mounted tank and pumping equipment for use in the liquid waste industry. Most common uses for the trucks are portable toilet service, septic service, waste oil collection. Most common installations include the mounting of a vacuum tank to the truck chassis with various types of mounting brackets. The vacuum pumping systems are generally power take off driven or hydraulic driven and are bolted to the truck frame. Water delivery systems are generally 12V electric driven, along with work lights, back up cameras, and other various safety systems. All legal lighting and bumpers must also be installed. General Skills Needed: General knowledge of 12 volt electrical systems and wiring installation Ability to read wiring diagrams and blue prints Ability to use measuring devices like a tape measure, levels and micrometer Ability to use power tools like, drills, saws, air tools, etc. Light welding, cutting & metal fabrication General mechanical knowledge Ability to safely operate lifting equipment like hoists and lift trucks Ability to read installation manuals for a variety of truck equipment and install them as per instructions PTO installation skills are a plus Hydraulic experience is a plus A Good work ethic and an eagerness to learn are a must. Work Environment: This job operates in a manufacturing operation setting. The role is exposed to high heat in the summer and low temperatures in the winter for limited amounts of time. Physical/Mental Demands: This job could require standing, squatting, climbing and working on ladder or step stool. The weight is up to 50 lbs lifting working in heat/cold. Position Type: This is a full-time position. Expected Hours of Work: The typical days and hours of work are Monday through Thursday 6:00 am - 4:00pm Overtime is required as needed for production. PM25

Truck Chassis Assembler Install chassis mounted tank and pumping equipment for use in the liquid waste industry. Most common uses for the trucks are portable toilet service, septic service, waste oil collection. Most common installations include the mounting of a vacuum tank to the truck chassis with various types of mounting brackets. The vacuum pumping systems are generally power take off driven or hydraulic driven and are bolted to the truck frame. Water delivery systems are generally 12V electric driven, along with work lights, back up cameras, and other various safety systems. All legal lighting and bumpers must also be installed. General Skills Needed: General knowledge of 12 volt electrical systems and wiring installation Ability to read wiring diagrams and blue prints Ability to use measuring devices like a tape measure, levels and micrometer Ability to use power tools like, drills, saws, air tools, etc. Light welding, cutting & metal fabrication General mechanical knowledge Ability to safely operate lifting equipment like hoists and lift trucks Ability to read installation manuals for a variety of truck equipment and install them as per instructions PTO installation skills are a plus Hydraulic experience is a plus A Good work ethic and an eagerness to learn are a must. Work Environment: This job operates in a manufacturing operation setting. The role is exposed to high heat in the summer and low temperatures in the winter for limited amounts of time. Physical/Mental Demands: This job could require standing, squatting, climbing and working on ladder or step stool. The weight is up to 50 lbs lifting working in heat/cold. Position Type: This is a full-time position. Expected Hours of Work: The typical days and hours of work are Monday through Thursday 6:00 am - 4:00pm Overtime is required as needed for production. PM25

Truck Chassis Assembler Install chassis mounted tank and pumping equipment for use in the liquid waste industry. Most common uses for the trucks are portable toilet service, septic service, waste oil collection. Most common installations include the mounting of a vacuum tank to the truck chassis with various types of mounting brackets. The vacuum pumping systems are generally power take off driven or hydraulic driven and are bolted to the truck frame. Water delivery systems are generally 12V electric driven, along with work lights, back up cameras, and other various safety systems. All legal lighting and bumpers must also be installed. General Skills Needed: General knowledge of 12 volt electrical systems and wiring installation Ability to read wiring diagrams and blue prints Ability to use measuring devices like a tape measure, levels and micrometer Ability to use power tools like, drills, saws, air tools, etc. Light welding, cutting & metal fabrication General mechanical knowledge Ability to safely operate lifting equipment like hoists and lift trucks Ability to read installation manuals for a variety of truck equipment and install them as per instructions PTO installation skills are a plus Hydraulic experience is a plus A Good work ethic and an eagerness to learn are a must. Work Environment: This job operates in a manufacturing operation setting. The role is exposed to high heat in the summer and low temperatures in the winter for limited amounts of time. Physical/Mental Demands: This job could require standing, squatting, climbing and working on ladder or step stool. The weight is up to 50 lbs lifting working in heat/cold. Position Type: This is a full-time position. Expected Hours of Work: The typical days and hours of work are Monday through Thursday 6:00 am - 4:00pm Overtime is required as needed for production. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Omaha, NE, branch. The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Orlando, FL, branch ( This branch is due to move to a new location in Apopka in early 2026) . The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Orlando, FL, branch ( This branch is due to move to a new location in Apopka in early 2026) . The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Omaha, NE, branch. The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Omaha, NE, branch. The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

Service Technician Lead Reports To: Field Supervisor or General Manager Status: Full-time, Regular position Why You Should Join the Service Experts Team? Our team consists of the very best; we believe in doing what is right for our customers and our employees. We provide our employees with the training, support and an opportunity for unlimited professional growth. Join us and become an EXPERT! Service Experts Company Perks and Benefits for YOU Top Pay for Top Performers, including incentive and bonus opportunities (depending on the position) Our Top Technicians earn over $100,000 Generous PTO provided 24 paid days off within your first year of employment (vacation, personal holidays, & national holidays) 29 paid days off after your 2nd year of employment Ready to get out of your work truck? We have ample advancement and career-growth opportunities available across the U.S. Hold on to your more of your paycheck with Company-sponsored Medical, Dental, and Vision Insurance programs Company-provided smart phone, tablet, uniform plan, and tool replacement program We'll make you better at what you do with our internal Training Academy Best-in-class 401(k) Retirement Savings Plan with attractive company matching contributions Company-paid employee Life Insurance with options for YOU and your Family! Short-term and Long-term disability insurance options that will protect you and your family if you are unable to work Supplemental benefit programs such as: Legal advice, pet insurance, and health advocacy programs Come join the BEST and the BIGGEST team in HVAC: Service Experts Heating, Air Conditioning, & Plumbing! Position Summary: Under minimal supervision, performs diagnostic and service work on residential and/or light commercial HVAC equipment and accessories. Communicates with customer to answer questions, resolves problems, and ensures complete customer satisfaction. Promotes products and services to customer. Works under the direction of the Field Supervisor or General Manager. Key Responsibilities: Works under minimal supervision to perform residential and/or light commercial service and maintenance calls Analyzes, diagnoses, and resolves customer problems in a courteous, professional, timely, and accurate manner Diagnoses and performs services on heating, air conditioning, ventilation, and refrigeration equipment as well as accessories in an accurate and timely manner Inspects equipment and performs diagnostics on equipment to identify potential problems to prevent premature and unexpected breakdowns or callbacks Completes routine maintenance and equipment cleaning as needed or required Responsible for delivery and removal of parts and equipment needed to complete service work Using hand-held device records all required information on customer call. Completes all forms and paperwork in a neat, timely, complete, and accurate manner. Collects payment from customer. Communicates with dispatch, while on duty, to ensure dispatcher has an accurate status report of activities and availability Responsible for delivery of excellent customer service and sustaining high levels of customer satisfaction Promotes products and services to the customer. Calls Sales and Service Coordinator with specifics on replacement product sales leads generated from customer service visit. Ensures company property, vehicles, and tools are being used, maintained, and properly accounted for Represents the company professionally, honestly, and ethically in all business matters and activities Follows standard procedures and process, ensures that the company vehicle is properly stocked, returns defective warranty parts to the branch, and orders/replenishes vehicle stock as needed Performs similar/other duties as needed or assigned Regular, reliable attendance Health & Safety Roles and Responsibilities: Reports any unsafe acts, conditions and hazards to direct supervisor/manager immediately Reports any contravention of legislation or company policy, procedure or program to direct supervisor/manager immediately Corrects substandard acts or conditions within area of control Uses and maintains appropriate personal protective equipment (PPE) as prescribed by company program(s) or procedure(s) Never removes or renders ineffective safety guards, devices, or clothing prescribed to be in place or worn Complies with the general rules as prescribed by company program(s) procedure(s) Operates devises or equipment as prescribed by company program(s) or procedure(s) Participates in any safety initiatives, teams, or committees Reports all injuries or incidents as prescribed by company program(s) or procedure(s) immediately Provides input on developing safety initiatives and plans to eliminate exposures that could cause accidents Does not perform act that may endanger the safety or well-being of others Does not engage in any pranks, contests, or rough boisterous behavior Works in compliance with applicable legislative requirement Desired Skills and Qualifications: High school diploma or GED with additional training and 5+ years' experience in HVAC with technical training certification required OK Journeyman HVAC License Must possess all valid licensing or certification as required by federal, state, provincial, or local governmental laws or regulations for the geographical work area EPA and safety certifications required Skilled at servicing heating, air conditioning, and ventilation equipment as well as related accessories Proficient mechanical aptitude and the ability to operate all necessary tools and equipment Proficient and able to operate all necessary tools and equipment to perform various service projects Proficient at reading wiring diagrams and troubleshooting problems with electrical, refrigerant and duct systems on HVAC equipment Proficient and able to properly start up and balance airflow and to properly align belts and pulleys on all systems with little to no supervision Proficient and able to install a basic duct fitting Proficient at troubleshooting and repairing electronic air cleaners, refrigeration systems, hot water systems, steam boiler systems, humidifiers, and related equipment with little to no supervision Effective communication skills to communicate with customer and resolve customer issues, complaints, or concerns Effective and efficient time-management and organizational skills Valid driver's license with acceptable driving record Available to work flexible hours and on-call shifts as needed Ability to stand and walk and to climb ladders and attic stairs and to maneuver in attics, basements, and crawl spaces to access HVAC units. Ability to continually climb, balance, stoop, kneel, crouch, and/or crawl. Ability to work in a variety of environmental conditions, including but not limited to the following: hot, cold, outdoor, indoor, dry, humid, slippery surfaces, heights, and congested areas Ability to safely climb 300lb load capacity rated ladders with a 30lb tool belt Natural or corrected vision to see and focus for close, distance, peripheral vision with normal depth perception Ability to lift up to 75 pounds and ability to lift and carry items weighing up to 50 pounds

Level 1 IT Technician Office: Long Island City, NY (daily travel to client sites in NYC required) Company: TEC Building Systems LLC | tecsystemsnyc.com Salary range: $55,000 - $65,000 Reports to: Basim Sharhan, IT Manager Recruiter: Kate Lewis, People Ops Program Manager Please apply on LinkedIn and send resume and cover letter to ********************* OVERVIEW TEC Building Systems is seeking a Level 1 IT Technician to join our growing team. In this role, you'll design, maintain, and troubleshoot the hardware and software of our customers' building management systems. You'll provide technical support both in-house and on-site, perform upgrades and preventive maintenance, and assist with training non-technical staff in troubleshooting techniques. This position requires daily travel to client sites throughout New York. Applicants must hold a valid driver's license. RESPONSIBILITIES Perform preventative maintenance on servers and workstations at customer sites Install and configure desktop and laptop computers, peripherals, and related hardware Integrate devices into network environments and test software applications Provide Tier 1 hardware and software support for Windows devices Deliver on-site technical support and ensure client satisfaction during deployments Document all work assignments, resolutions, and client approvals Provide help desk support: problem determination, documentation, diagnostics, resolution, and ticket escalation Troubleshoot hardware, software, and connectivity issues for end users Support users with MS Office, antivirus tools, mobile devices, and peripherals Use remote desktop software to resolve issues or walk clients through solutions Act as a liaison between customers and internal IT staff for accurate problem interpretation Maintain accurate ticketing and reporting in the help desk system QUALIFICATIONS Required: Experience: Minimum 1+ year of frontline IT support (help desk, service desk, or equivalent). Customer Service: Strong interpersonal, customer service, and follow-up skills with a focus on user satisfaction. Communication: Excellent written and verbal communication, including the ability to explain technical concepts to non-technical users. Work Style: Self-motivated, reliable, and able to work independently while managing multiple priorities. Operating Systems: Hands-on troubleshooting experience with Microsoft Windows 10 and Windows 11; familiarity with Windows Server 2016/2019. Software & Applications: Proficiency with Microsoft 365/Office 365 suite, endpoint security/antivirus tools, and common business applications. Hardware & Peripherals: Experience supporting desktops, laptops, printers, scanners, and mobile devices (iOS/Android). Networking: Basic understanding of TCP/IP, DNS, DHCP, and VPN concepts. Documentation: Strong documentation, ticketing, and research skills; experience with ITSM platforms (e.g., ConnectWise, ServiceNow, or similar) is a plus. Licensing & Compliance: Awareness of data security, acceptable use, and basic IT compliance practices. Other: Valid driver's license and ability to travel daily within the New York metropolitan area. Preferred (Nice to Have): CompTIA A+, Network+, or equivalent certification. Exposure to Active Directory (user accounts, password resets, group membership). Experience with remote support tools (TeamViewer, AnyDesk, RDP, etc.). Familiarity with basic IT asset management and inventory tracking. WHY JOIN TEC? Since 1981, TEC Building Systems has been a trusted leader in building automation. Based in Long Island City, we design and deliver custom control solutions for New York's most iconic projects. At TEC, you'll join a collaborative, future-focused team with opportunities for growth, training, and long-term career development.

The Engineering Support Technician-3 team member works independently throughout the manufacturing plants to analyze, modify, and build machines, tools, fixtures, jigs, templates, and guards. Team member will work with other technicians, tool room personnel, engineers, department managers, and operators during the analysis and implementation phases of various projects. Key Responsibilities Draft and design shafts, jigs, and equipment components. Create and update designs using 3D modeling tools (SolidWorks). Fabricate parts using lathe, mills, welding, and metalworking techniques. Translate designs and models into finished components and complete machines. Modify and upgrade existing machines for improved performance. Diagnose mechanical failures and provide engineering support solutions. Example projects include fabricating mounts for sensors on conveyor belts. Qualifications Education: Associate's degree in Engineering Design Technology, Drafting, or CAD. Experience:Proficiency in CNC machining, welding, and metal fabrication. Strong skills in 3D modeling (SolidWorks). Hands-on experience with mills, lathes, and general machine shop tools. Ability to take a design from concept through fabrication and assembly. Ideal Candidate Detail-oriented with strong problem-solving skills. Comfortable working independently and as part of a team. Skilled in scaling projects and rounding out technical capabilities. PROGRESSION REQUIREMENTS: All base level requirements must be met within two years upon position acceptance. To reach a progression level you must demonstrate technical skills, leadership skills and pass classes / certifications as identified by the progression review committee. ENVIRONMENT: · Noise level requires hearing protection in designated areas · Season high temperatures and humidity · Work in a team environment with the ability to communicate in a concise, polite and respectful manner Final Selection by Panel Interview

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For If you are looking for fast paced technical work that provides the opportunity for travel across the United States, look no further than Clayco. This position assists and provides IT services to internal customers located at our jobsites around the country. Support includes installation, documentation, and testing of computer systems and peripherals, as well as establishing standards and guidelines for supporting local and remote sites. This position requires the ability to identify and organize tickets and requests according to priority. Travel is usually planned in advance, but issues can arise which could warrant immediate travel to one or more local or remote locations. The Specifics of the Role Provide day to day support to our remote Jobsites Prioritize problems and incidents and escalate to internal teams Basic knowledge of Microsoft products (Windows, Office) Physical Installation of Meraki networks Physical Installation of full site Mesh networks Satellite communication installation Basic Knowledge of Cisco AV Room kits (Webex) Basic understanding of Design and Construction delivery process Create and document training materials and knowledge articles Provide training on software, hardware, and systems to Clayco Team Members Preventative maintenance, including checking and cleaning of workstations, printers, and peripherals Perform post-resolution follow-ups to requests and incidents Manage printer hardware and software throughout our jobsites Provide feedback on recurring incidents to engineering and development teams First line of troubleshooting for remote networks Adaptive and willing to learn business processes Self-starter with the ability to workwithout direct supervision Effective communication skills and deductive reasoning ability Work with the Service Desk, Device Support, Engineering, VDC, and Development teams to determine and resolve problems received from clients local and remote. Work with ISP vendors and managed services support partners to resolve technical problems Perform regular health checks on equipment at remote sites. Use diagnostic utilities, knowledge bases, and internet resources to document and create troubleshooting processes that can be utilized by others. Provide technical assistance for project planning and support. Identify and inform Leadership of recurring Incidents. Contribute to company vision and direction by helping improve technical practices. Requirements 1 to 4 years of experience in IT 60% plus Travel Ability to use hand and power tools Lift and move heavy objects (50+ lbs) Service industry experience Strong interpersonal and communication skills Basic MS Office Suite/iOS support Experience using enterprise ticketing system (ServiceNow) Knowledge of AV solutions Experience with cellular technologies (cradlepoints, hotspots) Some Things You Should Know Our clients and projects are nationwide - Travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco? 2025 Best Places to Work - St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2025 ENR Midwest - Midwest Contractor (#1). 2025 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2025 ENR Top 100 Green Contractors - Green Contractor (Top 3). 2025 ENR Top 25 Data Center Builders - Data Center Contractor (Top 3). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the

Job Title: Testing Technician FLSA Status: Non- Exempt The Testing Technician is responsible for supporting dielectric testing processes with a focus on product safety, regulatory compliance, and risk management. This part-time role requires approximately 20 hours per week, with the possibility of additional hours based on operational needs. ESSENTIAL FUNCTIONS: Operate testing equipment in accordance with established procedures. Inspect products to ensure they meet safety and compliance standards. Receive and prepare customer products for testing or shipment. Schedule customer pickups and deliveries. Deliver and pick up customer orders as needed. Maintain positive and professional customer interactions. Manage and track inventory levels. Safely operate a forklift in daily operations. DESIRED MINIMUM QUALIFICATIONS: High school diploma Strong verbal and written communication skills. Ability to understand and convey technical information effectively. Strong analytical and problem-solving abilities; capable of prioritizing tasks and meeting deadlines. Proficiency in Microsoft Word, Excel, Outlook, and web browsers. Ability to lift up to 25 pounds regularly. Ability to remain standing for extended periods during the workday. Valid driver's license required. INTREN is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Messer Construction Co. is an award-winning construction manager and general contractor that provides leadership for complex commercial building projects. An employee-owned company, Messer now stands as one of the nation's leading healthcare and higher education builders. Messer's footprint has grown to eleven regional offices located across the Midwest and Southeast: Greenville, South Carolina; Charlotte & Raleigh, North Carolina; Columbus, Cincinnati, & Dayton, Ohio; Louisville and Lexington, Kentucky; Indianapolis, Indiana; and Knoxville & Nashville, Tennessee. Messer employees live where they work, resulting in the company's sustained commitment to building better communities. We are currently seeking a Rental Division Service Technician to join our team in Cincinnati. As a Rental Division Service Technician you will perform a variety of daily physical tasks to ensure safe and efficient rental operations. Your primary objective will be to provide labor assistance to service technicians, drivers, coordinators and other branch personnel engaged in meeting the daily and long-term needs of our customers. This individual will be responsible for the effective washing, detailing and prepping of equipment and tools for delivery to Messer project sites and regions. This individual will perform a variety of duties for his/her assigned location(s). They will develop positive relationships with other Rental Division employees in order to facilitate the atmosphere and positive work environment for a successful team. What You Will Do: Loading and Unloading of trucks Inspecting equipment and tools upon return for defects or missing items Perform Rental Ready inspections Assist with small tool and equipment maintenance Pressure Washing and cleaning of returned tools and equipment Keep warehouse and laydown area organized and safe Delivery / Pick-up of Equipment, tools and supplies as needed And all other duties and responsibilities determined by the management of the rental division What You Will Bring: Successful completion of Pre-Employment and Drug Test Strong Work Ethic, Reliability, and Positive Attitude Desire to Learn and move up career Enrolled In, or completed Technical School Training and/or High School/GED A valid driver's license Diligent attention to Safety Working indoors and outdoors in all weather conditions Ability to lift up to 50 lbs. Your decisions influence your career at every step: Make yours count with Messer Construction Co. In business since 1932 and employee-owned since 1990, Messer builds projects and careers that leave a lasting impact on our communities. We bring opportunities for collaboration and growth; you bring the determination. Let's build something great together. All Messer employees are required to comply with our Substance Abuse Prevention Policy as a condition of employment. Messer may condition offers of employment upon taking and passing of a post-offer/pre-employment drug screen. Messer is an equal opportunity employer, and all qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, disability status, veteran status, sexual orientation or gender identity. Messer is committed to a diverse workforce.

Permit Coordinator - St. Cloud, Florida A WORLD LEADER IN TESTING, INSPECTION & CERTIFICATION SERVICES Bureau Veritas offers dynamic, exciting employment opportunities with an attractive salary/benefit package and an opportunity to play a vital role with a global organization. If you would enjoy working in a dynamic environment and are looking for an opportunity to become part of a stellar team of professionals, we invite you to apply online today. Bureau Veritas is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, citizen status, sexual orientation, genetics, status as a protected veteran, or any other non-job-related characteristics. The Permit Coordinator is responsible for inspection scheduling, inspection reporting, and plan review processing, while completing organizational and administrative tasks to support the department's daily operations. Strong attention to detail and organizational abilities are needed to successfully sort and keep track of various time-sensitive tasks. The Permit Coordinator must be able to apply problem-solving and critical thinking skills for problem resolution when conflicts arise. Essential Duties and Responsibilities include the following. Other duties may be assigned. Process inspection requests and schedule inspections following company established procedures. Provides support for administrative functions in the assigned department. Answers incoming calls; processes mail, faxes, copying, FedEx shipments, etc. Manages the workload to ensure all tasks are completed within the established timeframes. Process final packets for Certificates of Occupancy or Completion. Assists clients to meet construction goals and timeframes. Identify and report conflicts or issues with scheduling and/or company databases. Communicates scheduling changes with staff and clients. Performs data entry and maintenance of company databases, directories and records. Performs a variety of essential record keeping duties, and maintains department record keeping and filing systems Process plans for review, acting as liaison between staff and client Assists with any other duty that is required to ensure inspections are scheduled and reported accurately. Performs other related duties, as directed. NOTE: Management retains the discretion to add to or change the duties of the position at any time. Experience: High school graduate with, at least, 3 years of office experience General knowledge of the Construction Industry Proficient with Microsoft Office programs Excellent communication skills with high level of English proficiency, both written and verbal, with an exhibited high level of professionalism. Extreme attention to detail, organizational and time management skills Skills: Knowledge of general office equipment- copier/fax/scanner, phone Problem-solving abilities Excellent customer service skills Must be able to understand and follow instructions Ability to work well with others in a collaborative team environment High energy level and able to work in a fast paced environment Computer Skills: Demonstrated knowledge of a variety of computer software applications in word processing, spreadsheets, document and database software (Outlook, Word, Excel, Adobe Acrobat). Work Environment: An employee in this position typically works in an office environment with controlled climate. Outside office travel is limited. Physical Demands: While performing the duties of this Job, the employee is regularly required to sit and work with computer systems for extended periods of time. The employee is occasionally required to lift up to 20 pounds. The vision requirements include: ability to adjust focus, distance vision and close vision.

Job Title: Mold Remediation Technician Reports To: Mitigation Manager What does a Mold Remediation Technician with Paul Davis do? * Serve others within your community in their time of need * Make a difference for others that have had a disaster strike their property * Work hard and take pride in completing projects (i.e. mold remediation, mitigating flood and fire damage) * Be empathetic and show a sense of urgency while communicating through modern technology Why Join The Team? Paul Davis is an industry leader in restoration and reconstruction for insurance providers and commercial properties throughout the United States and Canada. We are growing locally and have career opportunities for individuals who want purpose out of their work. We love creating an opportunity for our team members, providing industry training and giving technicians the opportunity to become experts in the field through certifications and Paul Davis University. Built upon principles of customer service, dynamic decision-making and leadership, we have the tools to continue our rapid growth. Our team puts emphasis into living our Vision, Mission and Values to be more than just a service provider - our Mold Remediation Technicians are on the front lines of restoring their communities by being first on site after disasters strike (i.e. floods, fires) and will be leading the mitigation effort to restore the property. Values: Deliver what you promise. Respect the individual. Have pride in what you do. Practice continuous improvement. Vision: To provide extraordinary care while serving people in their time of need. Mission: To provide opportunities for great people to deliver Best in Class results. Why The Team Needs You? Serving others after a disaster has struck their property is not easy. Everyone within Paul Davis needs to have a world-class work ethic, serious attention to detail and love to help people. It is challenging to make customers happy when faced with a traumatic event, but you will love being a technician if you take pride in your work and have fun while working with others. Team Compensation and Benefits: * Leadership Development - our company grows from the inside. If you are determined and motivated enough, ask about participation in our leadership development initiative to grow your career and explore new opportunities * Cross-training opportunities to advance your career * Flex schedule - at Paul Davis we are committed to our team and their well-being. We have instituted the ability for flex hours that ensures team members get the time they need for personal matters while still being able to work full time. * Paid training * Health plan options * Bonus program * Referral program * Great culture and team dynamic * Hourly pay: $18.00 to $27.00/hour based on experience and certifications Team Qualifications (Requirements): * Desire to join a world-class team and contribute a positive attitude * Dedication to customer service * Fluent in English * Valid driver's license with a clean record * Able to pass criminal background check * Have the ability to work nights/weekends and overtime, if needed * Ability to lift 75 LBS frequently * Desire to continually learn new things Role on the Team (Job Responsibilities): * High level performance of water mitigation, tarping, board up, mold remediation, demolition and carpet cleaning/reinstallation services according to Paul Davis and industry specifications under the supervision of the Mitigation Manager. * Focus and dedication to providing excellent customer service. * Maintain a clean, properly stocked, and organized truck and maintain all company equipment. * Be accessible by phone and participate, as necessary, in the on-call schedule. * Assist in warehousing and facility related tasks when necessary. * You will assist other team members as you see opportunities arise and be a leader for the team when needed. * Opportunity to advance into Project Management Please apply if you think you have what it takes to serve others and deliver a world-class service when others need it the most. We are looking forward to discussing this opportunity with you. We support and hire Veterans and we are an Equal Opportunity Employer!