PBF Energy jobs in Torrance, CA - 12643 jobs

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. MPC is an industry leading, dynamic company that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. MPC provides compensation, incentives and benefits that allow our employees to build careers - not just work a job. “2022 & 2023 Top Companies for Women to Work For in Transportation” Awarded by the official magazine of the Women In Trucking Association. Job Description Marathon Petroleum Company LP (MPC) has a position available for a professional, local (home daily), transport driver. Our drivers are responsible for the safe and efficient delivery of petroleum products from various loading locations to various delivery points and customers. Transport drivers independently follow policies, procedures, and standards. Marathon transportation has one common vision: no accidents, no injuries, while being good stewards of the environment. Inclusive Benefits. Local Routes. Safety First. Outstanding Training. Click Here for more reasons why MPC is the last stop for many drivers. Benefits Total compensation up to $130,000 Hourly Rates: $33.05-$34.79 Insurance: Health/Dental/Vision coverage available day 1 Retirement: 401k with company match up to 7% Pension: Company funded pension plan up to 11% Annual bonus: Eligible for company sponsored annual bonus. Paid parental leave. Education reimbursement For full benefit details visit ********************* Minimum Qualifications Active Class A Commercial Driver's License Must maintain a satisfactory driving record and provide consent to company for review of driving record(s). Must register with FMCSA Drug & Alcohol Clearinghouse and provide consent to company for review of clearinghouse records. Must be able to drive interstate. Active CDL Endorsements: Hazardous Materials and Tank Vehicle (Required) License - Restrictions: Must be able to operate a manual transmission (13 speed) Shift Requirements Must be able to work up to a 12-hour AM/PM shift. Must be able to work hours beyond schedule Job Responsibilities Perform pre-trip inspection on equipment in alignment with MPC policy and Department of Transportation (DOT) regulations. Check tank truck/trailer or tractor/trailer for general operating requirements and make sure that all required equipment is available and in good operating condition. Note inspection and deficiencies on the pre-trip inspection form. Drive a tank truck/trailer or tractor/trailer to transport product in a safe, efficient, and professional manner. Obey all applicable federal, state and local laws. Follow MPC and site specific standard operating procedures for the loading and offloading process. Perform post-trip inspection on equipment in alignment with MPC policy and DOT regulations. Complete all regulatory and customary paperwork. Ensure equipment is ready for the next shift. Communicate all incidents, including safety and environmental concerns, according to company procedures. Report all equipment issues in a timely manner. Follow, maintain, and adhere to all safety rules and operating procedures, including all DOT regulations. Physical Requirements Must be able to work outside in all types of weather conditions. Must be able to work on elevated spaces: 30+ feet on graded elevation. Must be able to frequently lift, carry, push, and/or pull 50-65 lbs. Must be able to sit for extended periods of time. Must be able to grip a steering wheel for extended periods of time. Screening Requirements Must maintain a satisfactory driving record and provide consent to company for review of driving record(s). Must pass required drug and alcohol screening(s). Must complete DOT physical and maintain current medical card. Must pass three-year DOT safety background check and seven-year criminal background check. Must pass pre-trip exam and road test to demonstrate proficiency operating required equipment. #TR Are You Ready to Roll? Apply here now or visit **************************** for more information. As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Cadiz, Ohio Additional locations: Job Requisition ID: 00019814 Location Address: 43073 Industrial Park Rd Education: Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at ***************************** hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

Ever since we started in 2007, Sunrun has been at the forefront of connecting people to the cleanest energy on Earth. It's why we've become the #1 home solar and battery company in America. Today, we're on a mission to change the way the world interacts with energy, and we're building a company and brand that puts power at the center of life. And we're doing it by designing a dynamic culture where employee development, well-being, and safety come first. We're unlike any other solar company. Our vertically integrated model gives us total control over every part of the energy lifecycle - from sale through installation and beyond - so you can find endless opportunities for growth. Come join a career you can grow in and a culture you can run with. Overview The Field Performance Technicians are responsible for the management, scheduling, and completion of all service and warranty related work. The Field Service / Field Performance Technician must have the ability to work both independently and as a member of the Performance O&M team. This position will interact closely with the customers, Branch Manager, the Senior Electrical Foreman, Construction Supervisor and the centralized scheduling Field Service Team. ESSENTIAL DUTIES AND RESPONSIBILITIES Organize, lead, and maintain the warranty and service schedule. Work with the Electrical Foreman, Construction Supervisor and the Branch Manager to allocate labor resources to service and warranty projects as needed Assist with training and development for Field Service Technicians and Field Communications Technicians. Lead regular meetings to align and train the local field service team on best practices Support the on-boarding and training of new members of the field performance team Regularly exceed defined goals for field performance key performance indicators including but not limited to turnaround time, experience rating and average dispatches completed Assist with other tasks including inspections and site audits when assigned EDUCATION AND EXPERIENCE 1 - 3 years of previous field construction or solar experience required PV design or PV electrical experience is preferred High School diploma is required LICENSE AND CERTIFICATION REQUIREMENTS (include where appropriate) Must maintain a clean driving record with the ability to pass a driving background check. Must be 21 years of age and possess a valid driver's license. Valid state or local Electrical Journeyman certification or license preferred. Depending on state requirements an Electrical Journeyman certification or license may be required SKILLS AND COMPETENCIES Knowledge of the NEC and applicable codes and standards Must be a motivated team player, looking to succeed Proven track record of excellent customer service Excellent verbal and written communication skills Excellent organizational and time management skills Strong computer skills Electrical/PV Installation Knowledge: Working knowledge of current NEC codes. Ability to interpret single line drawings and PV systems from roof to meter. Demonstrates knowledge of electrical principles as it pertains to solar interconnection/tie-in and code and how PV systems operate. Understands interconnection activities. Understands basic construction principles. Safety: Adheres to company safety policies and procedures including ability to identify and report safety hazards, and the ability to encourage others to work safely Customer Service: Ability to establish rapport, build relationships and loyalty with external and internal customers and coworkers, and remains tactful when communicating Results Driven: Proven ability to meet deadlines and key metrics. Works independently, as a team player, and drives results in a fast paced, team based environment. Must be willing to assist teammates and build strong relationships to achieve company and department goals Problem Solving: Solid logical decision making and troubleshooting skills with the ability to problem solve in a timely and effective manner. Exercises good judgment. Takes ownership of issues or questions and will escalate problems to the appropriate persons and follow up accordingly with the customer. Knows when to involve supervisors PHYSICAL DEMANDS Ability to transport materials and equipment to complete assigned job tasks (up to 50 pounds frequently and up to 100 pounds with assistance) Ability to work on rooftops with various angles and surfaces which requires frequent bending, twisting, squatting, climbing, kneeling, crawling, turning, standing, and balance Ability to climb ladders Ability to work in outdoor weather conditions including but not limited to: excessive noise, extreme heat, extreme cold, wet environment, and humidity Ability to frequently utilize hand functions requiring fine motor skills, including but not limited to: fine manipulation, grasping, and pinching Ability to work within the safe range of equipment such as ladders, fall protection harnesses and other personal protective equipment Ability to work and maintain balance on roofs and other areas of height Ability to work in the sun and possibly low light conditions Ability to walk on rafters, roof tiles, and roof shingles without damage Ability to distinguish colors such as red, black, yellow, white, green Ability to work in confined spaces such as attics, basements, and crawl spaces which requires kneeling and crouching Ability to hear verbal commands and warnings Ability to work with chemicals using appropriate protections DISCLAIMER This description indicates the general nature and level of the qualifications and duties required of employees in this job classification, as well as the essential functions a person must be able to perform to do this job. It is not designed to be a comprehensive inventory of all duties and qualifications required of employees assigned to this job. Sunrun Inc. and its subsidiaries are equal opportunity employers and make employment decisions on the basis of merit and business need. We hire without consideration to race, color, religion, citizenship, political activity or affiliation, marital status, age, national origin, ancestry, disability, veteran status, sexual orientation, gender identity, gender expression, sex or gender, or any other basis protected by law. Recruiter: Vanessa Christensen (vanessa.christensen1@sunrun.com) Please note that the compensation information is made in good faith for this position only . It assumes that the successful candidate will be located in markets within the United States that warrant the compensation. Please speak with your recruiter to learn more. Starting salary/wage for this opportunity: $32.05 to $42.73 Compensation decisions will not be based on a candidate's salary history. You can learn more here. This job description outlines the primary responsibilities, some essential job functions, and qualifications for the role. It may not include all essential functions, tasks, or requirements. If you are a qualified individual with a disability and you need reasonable accommodation during the hiring process or to perform this role, please contact us at candidateaccommodations@sunrun.com. Sunrun is proud to be an equal opportunity employer that does not tolerate discrimination or harassment of any kind. We believe that empowering people and valuing their differences are essential for our mission of connecting people to the cleanest energy on earth. Learn more here: EEO | Sunrun

Spire is seeking a travel Nuclear Medicine Technologist for a travel job in Fort Worth, Texas. Job Description & Requirements • Specialty: Nuclear Medicine Technologist • Discipline: Allied Health Professional • 40 hours per week • Shift: 8 hours, days • Employment Type: Travel Spire Job ID #38601. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Nuclear Medical Tech About Spire Spire lives by the motto "Prescription before Diagnosis, equals malpractice" when it comes to recruiting healthcare professionals! Located in Atlanta, GA, Spire has been placing healthcare professionals across the US since 2013. Benefits • Weekly pay • 401k retirement plan • Mileage reimbursement • Referral bonus • Medical benefits • Dental benefits • Vision benefits • Benefits start day 1 • License and certification reimbursement

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. MPC is an industry leading, dynamic company that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. MPC provides compensation, incentives and benefits that allow our employees to build careers - not just work a job. “2022 & 2023 Top Companies for Women to Work For in Transportation” Awarded by the official magazine of the Women In Trucking Association. Job Description Marathon Petroleum Company LP (MPC) has a position available for a professional, local (home daily), transport driver. Our drivers are responsible for the safe and efficient delivery of petroleum products from various loading locations to various delivery points and customers. Transport drivers independently follow policies, procedures, and standards. Marathon transportation has one common vision: no accidents, no injuries, while being good stewards of the environment. Inclusive Benefits. Local Routes. Safety First. Outstanding Training. Click Here for more reasons why MPC is the last stop for many drivers. Benefits Hourly Rates: $30.72 - $32.47 Insurance: Health/Dental/Vision coverage available day 1 Retirement: 401k with company match up to 7% Pension: Company funded pension plan up to 11% Annual bonus: Eligible for company sponsored annual bonus. Paid parental leave. Education reimbursement For full benefit details visit ********************* Minimum Qualifications Active Class A Commercial Driver's License Must maintain a satisfactory driving record and provide consent to company for review of driving record(s). Must register with FMCSA Drug & Alcohol Clearinghouse and provide consent to company for review of clearinghouse records. Must be able to drive interstate. Active CDL Endorsements: Hazardous Materials and Tank Vehicle (Required) License - Restrictions: Operate manual and/or automatic transmission. Shift Requirements Must be able to work up to a 12-hour AM/PM shift. Must be able to work hours beyond schedule Job Responsibilities Perform pre-trip inspection on equipment in alignment with MPC policy and Department of Transportation (DOT) regulations. Check tank truck/trailer or tractor/trailer for general operating requirements and make sure that all required equipment is available and in good operating condition. Note inspection and deficiencies on the pre-trip inspection form. Drive a tank truck/trailer or tractor/trailer to transport product in a safe, efficient, and professional manner. Obey all applicable federal, state and local laws. Follow MPC and site specific standard operating procedures for the loading and offloading process. Perform post-trip inspection on equipment in alignment with MPC policy and DOT regulations. Complete all regulatory and customary paperwork. Ensure equipment is ready for the next shift. Communicate all incidents, including safety and environmental concerns, according to company procedures. Report all equipment issues in a timely manner. Follow, maintain, and adhere to all safety rules and operating procedures, including all DOT regulations. Physical Requirements Must be able to work outside in all types of weather conditions. Must be able to work on elevated spaces: 30+ feet on graded elevation. Must be able to frequently lift, carry, push, and/or pull 50-65 lbs. Must be able to sit for extended periods of time. Must be able to grip a steering wheel for extended periods of time. Screening Requirements Must maintain a satisfactory driving record and provide consent to company for review of driving record(s). Must pass required drug and alcohol screening(s). Must complete DOT physical and maintain current medical card. Must pass three-year DOT safety background check and seven-year criminal background check. Must pass pre-trip exam and road test to demonstrate proficiency operating required equipment. #TR As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Garyville, Louisiana Additional locations: Job Requisition ID: 00019983 Location Address: 4663 W Airline Hwy Education: Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at ***************************** hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

Spire is seeking a travel Echo Technologist for a travel job in Lubbock, Texas. Job Description & Requirements • Specialty: Echo Technologist • Discipline: Allied Health Professional • 40 hours per week • Shift: 10 hours, days • Employment Type: Travel Spire Job ID #38842. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Echo Tech About Spire Spire lives by the motto "Prescription before Diagnosis, equals malpractice" when it comes to recruiting healthcare professionals! Located in Atlanta, GA, Spire has been placing healthcare professionals across the US since 2013. Benefits • Weekly pay • 401k retirement plan • Mileage reimbursement • Referral bonus • Medical benefits • Dental benefits • Vision benefits • Benefits start day 1 • License and certification reimbursement

The Travel MRI Technologist position involves performing MRI scans and requires at least two years of recent MRI experience and specific certifications such as ARRT (MR) or AMRIT. This role is a 13-week travel assignment based in San Angelo, Texas, with a schedule of 5x8 hour shifts primarily in the evenings. Benefits include competitive weekly pay, housing and meal stipends, medical coverage, and retirement plans starting from day one. Spire is seeking a travel MRI Technologist for a travel job in San Angelo, Texas. Job Description & Requirements • Specialty: MRI Technologist • Discipline: Allied Health Professional • Start Date: • Duration: 13 weeks • 40 hours per week • Shift: 8 hours, days, evenings • Employment Type: Travel MRI Tech | TX | 5x8 Days Job Details San Angelo, Texas 13 Weeks, 40 hrs wk Preferred Start Date: Shift: 5x8 Mids / Evenings (15::00) Estimated Pay Package Total Gross Weekly Pay $2,666 Hourly Taxable Pay $: 35.50 Stipends Meals Weekly $: 476.00 Stipend Housing Weekly $: 770.00 Requirements BLS ARRT (MR) or AMRIT Travel experience strongly preferred 2+ years recent MRI experience required NO LOCALSmile radius rule • ARRT or ARMRIT accepted If candidate only has ARRT R - they must also have a TX radiology license If candidate has ARRT MR - they will NOT be required to have the TX radiology license Vax: flu and covid required - medical/religious exemptions only About Spire Spire lives by the motto "Prescription before Diagnosis, equals malpractice" when it comes to recruiting healthcare professionals! Located in Atlanta, GA, Spire has been placing healthcare professionals across the US since 2013. Benefits • Weekly pay • 401k retirement plan • Mileage reimbursement • Referral bonus • Medical benefits • Dental benefits • Vision benefits • Benefits start day 1 • License and certification reimbursement Keywords: MRI Technologist, travel MRI job, radiologic technologist, ARRT certified, San Angelo MRI, medical imaging, travel healthcare jobs, MRI technician travel assignment, BLS certification, healthcare travel opportunities

Ever since we started in 2007, Sunrun has been at the forefront of connecting people to the cleanest energy on Earth. It's why we've become the #1 home solar and battery company in America. Today, we're on a mission to change the way the world interacts with energy, and we're building a company and brand that puts power at the center of life. And we're doing it by designing a dynamic culture where employee development, well-being, and safety come first. We're unlike any other solar company. Our vertically integrated model gives us total control over every part of the energy lifecycle - from sale through installation and beyond - so you can find endless opportunities for growth. Come join a career you can grow in and a culture you can run with. Overview The Field Performance Technicians are responsible for the management, scheduling, and completion of all service and warranty related work. The Field Service / Field Performance Technician must have the ability to work both independently and as a member of the Performance O&M team. This position will interact closely with the customers, Branch Manager, the Senior Electrical Foreman, Construction Supervisor and the centralized scheduling Field Service Team. ESSENTIAL DUTIES AND RESPONSIBILITIES Organize, lead, and maintain the warranty and service schedule. Work with the Electrical Foreman, Construction Supervisor and the Branch Manager to allocate labor resources to service and warranty projects as needed Assist with training and development for Field Service Technicians and Field Communications Technicians. Lead regular meetings to align and train the local field service team on best practices Support the on-boarding and training of new members of the field performance team Regularly exceed defined goals for field performance key performance indicators including but not limited to turnaround time, experience rating and average dispatches completed Assist with other tasks including inspections and site audits when assigned EDUCATION AND EXPERIENCE 1 - 3 years of previous field construction or solar experience required PV design or PV electrical experience is preferred High School diploma is required LICENSE AND CERTIFICATION REQUIREMENTS (include where appropriate) Must maintain a clean driving record with the ability to pass a driving background check. Must be 21 years of age and possess a valid driver's license. Valid state or local Electrical Journeyman certification or license preferred. Depending on state requirements an Electrical Journeyman certification or license may be required SKILLS AND COMPETENCIES Knowledge of the NEC and applicable codes and standards Must be a motivated team player, looking to succeed Proven track record of excellent customer service Excellent verbal and written communication skills Excellent organizational and time management skills Strong computer skills Electrical/PV Installation Knowledge: Working knowledge of current NEC codes. Ability to interpret single line drawings and PV systems from roof to meter. Demonstrates knowledge of electrical principles as it pertains to solar interconnection/tie-in and code and how PV systems operate. Understands interconnection activities. Understands basic construction principles. Safety: Adheres to company safety policies and procedures including ability to identify and report safety hazards, and the ability to encourage others to work safely Customer Service: Ability to establish rapport, build relationships and loyalty with external and internal customers and coworkers, and remains tactful when communicating Results Driven: Proven ability to meet deadlines and key metrics. Works independently, as a team player, and drives results in a fast paced, team based environment. Must be willing to assist teammates and build strong relationships to achieve company and department goals Problem Solving: Solid logical decision making and troubleshooting skills with the ability to problem solve in a timely and effective manner. Exercises good judgment. Takes ownership of issues or questions and will escalate problems to the appropriate persons and follow up accordingly with the customer. Knows when to involve supervisors PHYSICAL DEMANDS Ability to transport materials and equipment to complete assigned job tasks (up to 50 pounds frequently and up to 100 pounds with assistance) Ability to work on rooftops with various angles and surfaces which requires frequent bending, twisting, squatting, climbing, kneeling, crawling, turning, standing, and balance Ability to climb ladders Ability to work in outdoor weather conditions including but not limited to: excessive noise, extreme heat, extreme cold, wet environment, and humidity Ability to frequently utilize hand functions requiring fine motor skills, including but not limited to: fine manipulation, grasping, and pinching Ability to work within the safe range of equipment such as ladders, fall protection harnesses and other personal protective equipment Ability to work and maintain balance on roofs and other areas of height Ability to work in the sun and possibly low light conditions Ability to walk on rafters, roof tiles, and roof shingles without damage Ability to distinguish colors such as red, black, yellow, white, green Ability to work in confined spaces such as attics, basements, and crawl spaces which requires kneeling and crouching Ability to hear verbal commands and warnings Ability to work with chemicals using appropriate protections DISCLAIMER This description indicates the general nature and level of the qualifications and duties required of employees in this job classification, as well as the essential functions a person must be able to perform to do this job. It is not designed to be a comprehensive inventory of all duties and qualifications required of employees assigned to this job. Sunrun Inc. and its subsidiaries are equal opportunity employers and make employment decisions on the basis of merit and business need. We hire without consideration to race, color, religion, citizenship, political activity or affiliation, marital status, age, national origin, ancestry, disability, veteran status, sexual orientation, gender identity, gender expression, sex or gender, or any other basis protected by law. Recruiter: Farah Ricci (farah.ricci@sunrun.com) Please note that the compensation information is made in good faith for this position only . It assumes that the successful candidate will be located in markets within the United States that warrant the compensation. Please speak with your recruiter to learn more. Starting salary/wage for this opportunity: $32.05 to $42.73 Compensation decisions will not be based on a candidate's salary history. You can learn more here. This job description outlines the primary responsibilities, some essential job functions, and qualifications for the role. It may not include all essential functions, tasks, or requirements. If you are a qualified individual with a disability and you need reasonable accommodation during the hiring process or to perform this role, please contact us at candidateaccommodations@sunrun.com. Sunrun is proud to be an equal opportunity employer that does not tolerate discrimination or harassment of any kind. We believe that empowering people and valuing their differences are essential for our mission of connecting people to the cleanest energy on earth. Learn more here: EEO | Sunrun

Crusoe's mission is to accelerate the abundance of energy and intelligence. We're crafting the engine that powers a world where people can create ambitiously with AI - without sacrificing scale, speed, or sustainability. Be a part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that's setting the pace for responsible, transformative cloud infrastructure. About the Role Crusoe is seeking a Director to lead our fast growing IT Service Desk operations across all company locations, supporting diverse environments including manufacturing and data center sites. This role will oversee day‑to‑day IT support, act as the primary escalation point for complex issues, and drive continuous improvement in service delivery and customer satisfaction. We are looking for a leader with a maniacal focus on using technology and automation to scale support. The Director will lead a team of Service Desk professionals, collaborating closely with Systems Engineering, Security, and IT Operations to ensure seamless and reliable service. What You'll Be Working On Lead, manage, and mentor the Service Desk team; build a culture of excellence by hiring, growing, and developing talent through coaching, performance reviews, and clear career pathing. Develop and execute a multi-year strategic roadmap for internal IT support, aligning technology, automation, and service delivery models with company growth. Develop and manage the annual IT Service Desk budget, including forecasting for hardware, software, services, and staffing. Lead procurement for end-user computing and own relationships with key technology vendors and internal Procurement stakeholders. Oversee daily Service Desk operations, ensuring timely resolution of tickets and adherence to SLAs. Partner with other IT and business teams to coordinate onboarding, offboarding, and provisioning activities. Develop and manage the IT asset management lifecycle, from procurement to disposal. Develop and maintain Service Desk documentation and knowledge bases. Monitor key performance metrics, identify improvement opportunities, and implement process optimizations. Lead and manage the IT technology buildouts for new office, manufacturing, and data center locations. Travel up to 20% to company office locations as needed. Qualifications Bachelor's degree in Information Systems, Computer Science, or equivalent experience. 7+ years of IT support and operations experience, including 3+ years in a leadership role managing Service Desk or IT support teams. Demonstrated ability to manage large-scale support operations, with a proven track record of measuring KPIs, managing continuous improvement, and using technology and automation to scale support. Proven experience developing staff performance, with a passion for mentoring and growing talent within the team. Proficiency in mac OS and Windows support, including command-line tools and native utilities. Strong understanding of Active Directory, Cloud Identity Management, SSO, SAML 2.0, and MFA. 5+ years of experience managing MDM or RMM solutions. Experience with SaaS management and IT asset tracking/lifecycle management. Experience collaborating with cross‑functional teams on IT initiatives and infrastructure projects. Ability to work in a hands‑on capacity while driving strategic initiatives. Excellent written, oral, and interpersonal communication skills. Previous experience in manufacturing environments preferred. Certifications in OKTA, Google Workspace, CCNA, or MCP are a plus. Ability to pass a background check. Compensation Range Compensation will be paid in the range of $180k - $225k + Bonus. Restricted Stock Units are also included in all offers. Compensation to be determined by the applicant's knowledge, education, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation. #J-18808-Ljbffr

A leading energy technology company in California seeks a Director of Cell Test Methods & Analytics. This role involves designing and optimizing test methods for lithium-metal batteries, ensuring high standards for reliability and safety. Candidates should have a PhD or MS with extensive industry experience in product testing and strong statistical modeling skills. The role offers competitive compensation, including a salary range of $200,200 to $270,200, and a comprehensive benefits package. #J-18808-Ljbffr

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position provides instrument and electrical technical support to construction, plant facilities and field operations. The position will repair, install, troubleshoot, and perform predictive and preventative maintenance tasks on control systems, natural gas compression or pump stations, SCADA, and other equipment contained within gas and liquid facilities and pipelines. Additionally, this position will inspect, troubleshoot, and maintain process control systems such as PLCs or DCS and other similar equipment. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: Install, diagnose, and maintain SCADA systems, plant, pipeline, and compressor instrument and electrical equipment components with all job duties and responsibilities executed in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements. Install, diagnose, and maintain pneumatic and intelligent instruments, electrical distribution systems, motor control gear, and associated equipment software Install, diagnose, and maintain PLC's or DCS systems & process or safety controls Read and interpret manuals, policy, engineering standards, regulations, drawings, and schematics, including electrical, pneumatic, and P&ID's Test, calibrate, and document plant and compressor station control and safety devices per DOT 192, DOT 193, DOT 195 or applicable PSM 1910 requirements and ensure frequencies of required preventative maintenance task are kept current Participate in call out/on call requirements Actively participate in partnership safety programs and initiatives Perform specialized technical skills (i.e. develops complex design projects, cost estimates, evaluates electrical systems, build and maintain ESD systems, maintain gas turbine or skid unit control systems) Provide work direction, oversight, and inspect other work provided by third party contractors Provide mentoring and oversight to less qualified employees Provide accurate written and electronic reporting Comply with partnership safety policies and procedures Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: Valid driver's license with demonstrated safe driving record Ability to maintain motor controls, relay logic, RTU's, I&E associated end-devices Proficiency with MS Office Suite including Outlook and Word Experience using software to troubleshoot, design, or configure control solutions specific to In Touch Wonderware or Factory Talk, Allen Bradley RSLogix, or Delta V Extensive knowledge of DOT 192 DOT 193, and DOT 195, as it pertains to required testing and documentation for plants, compressor stations, pipelines, and/or facilities as required Demonstrated understanding of the National Electric Code and OSHA 1910 as it relates to electrical systems Preferred Qualifications: State Electrical License Associates Degree in Instrumentation Related software and system certifications (i.e. Factory Talk, Delta V, etc.) Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Frequent exposure to heat, cold, and other adverse weather conditions Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs with or without assistance Working conditions may include confined spaces Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment Reliable attendance at work Occasional overnight travel may be required

Santa Fe Springs, CA, USA John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description Under the direction of the Manager, direct, supervise, and coordinate hourly personnel in a production, service, or maintenance department, with CNC machining being the primary area of responsibility, in accordance with company policy and practices, operating schedules, and controls for one or more shifts in more than one area of the plant. Direct, supervise, and coordinate hourly personnel across production, service, maintenance, and machining areas, with CNC machining as the primary area of responsibility. Ensure safe, efficient, and high-quality operations in accordance with company policies, operating schedules, and departmental objectives. Oversee daily shop activities including CNC machining, manual machining, assembly, repair/service, and general production tasks. Assign work, prioritize tasks, and provide guidance and support to employees throughout the shift. Maintain strong oversight of CNC operations, including setup practices, tooling needs, machining methods, and issue resolution. Monitor the use of safety devices, enforce safety protocols, and maintain a clean and hazard-free shop environment. Participate in hiring, onboarding, training, and development of production and machining associates. Conduct performance evaluations, recommend wage adjustments, and support employee communications and engagement initiatives. Collaborate with Production Control, Engineering, and Manufacturing Engineering to support machining schedules, drawings, process changes, and tooling requirements. Anticipate production or machining problems and implement corrective actions to minimize downtime or schedule interruptions. Work with vendors and suppliers regarding materials, tooling, equipment, service quality, and delivery schedules. Investigate accidents, equipment issues, and process inefficiencies; recommend improvements for safety, productivity, and cost savings. Prepare and maintain accurate production, machining, and efficiency reports in ERP/MRP systems. Perform additional duties as assigned. Qualifications Minimum 5 years of experience in a manufacturing environment, ideally in CNC machining, assembly, repair/service, or production operations Minimum 2 years of supervisory or team-lead experience in a shop or manufacturing setting Significant hands-on CNC machining experience - CNC is the largest and most critical part of this role. CNC operation and basic setup Tooling knowledge and selection Feeds, speeds, and machine controls Troubleshooting machining issues Experience working in a job-shop or high-mix machining environment. Experience overseeing or coordinating multiple shop areas (machining, assembly, service/repair, test, production) preferred. Demonstrated ability to train, coach, and develop hourly associates. Proficiency with ERP/MRP systems for tracking work orders, labor hours, and machining/production data. Strong verbal and written communication skills. Ability to manage competing priorities in a fast-paced, dynamic environment. Proficiency in Microsoft Office (Word, Excel, PowerPoint, Access, Outlook). High school diploma or equivalent; associate degree or technical certification preferred. Must Be Able To sit for extend periods of time; a minimum of 2 hours. maneuver to all areas of the office. lift up to 35 pounds. bend, reach, kneel, twist, and grip items while working at assigned desk area. have the manual dexterity and coordination to operate office equipment simultaneously manage several objectives and reassign priorities. Compensation: Depending on experience, CNC depth, and supervisory capability. Additional Information With colleagues stretching across the globe, we are proud of our diversity. To foster inclusivity, we run employee resource groups (ERGs) to provide a safe space for employees to connect and support each other. Our cross-business ERGs include Veterans, Pride Network, Black Employee Network, Women@Work Network, and Neurodiversity. Across our company, we recognize excellence, culminating in the Smiths Excellence Awards, our annual celebration of the most extraordinary activities, people, and projects that best showcase our strengths and help drive our business forward. We announce these on our annual Smiths Day, a global celebration of Smiths around our network. Join us for a great career with competitive compensation and benefits, while helping engineer a better future.

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. We are seeking an experienced and strategic Salesforce Solution Architect to lead the design and implementation of robust, scalable Salesforce solutions. This high-profile role combines technical expertise with strategic thinking to align technology with business goals and Salesforce best practices. This role will serve as a trusted advisor to internal teams and external clients, collaborating closely with stakeholders to define requirements and shape solutions. As a key member of the Salesforce Center of Excellence, this role influences enterprise architecture and gains exposure to the latest Salesforce technologies across a range of industries and domains. The ideal candidate has a strong background in Salesforce architecture and development, proven leadership skills, and the ability to effectively communicate complex ideas to diverse audiences. This role offers broad exposure and influence across the organization, providing opportunities to shape Salesforce strategy and contribute to innovation. This role will work on enterprise-scale solutions and enjoy continuous learning through advanced training, collaboration, and access to the newest Salesforce features and tools. The Solution Architect will play a vital role in transforming how the business operates through technology-driven customer engagement and operational excellence. This position belongs to a family of jobs with increasing responsibility, competency, and skill level. Actual position title and pay grade will be based on the selected candidate's experience and qualifications. Key Responsibilities Supports architectural governance and compliance, and contributes to defining principles, guidelines, and standards. Participates and contributes to solution architecture reviews and ensures architecture adherence. Collaborates with stakeholders to ensure solution alignment with business objectives. Evaluate and select appropriate technologies, frameworks, and platforms. Takes a more active role in analyzing technology trends and impacts and contributes to vendor assessments. Leads the design and development of end-to-end solutions that meet business requirements. Analyzes and translates business and technical requirements into solution designs. Leads the translation of business and technical requirements into architectural blueprints, collaborating with product owners and managers. Defines system integration approaches and ensures interoperability of components. Provides guidance and support to development teams during solution implementation. Manages the architecture for a broader scope of projects and develops roadmaps for portfolio evolution. Lead the architecture and design of Salesforce implementations across multiple projects or large, complex initiatives. Serve as a trusted advisor for clients and internal teams, providing strategic guidance and mentorship to Salesforce professionals. Conduct discovery sessions and assessments of clients' current Salesforce use; develop findings reports, solution roadmaps, and actionable recommendations. Collaborate with stakeholders to elicit, define, and prioritize business and functional requirements. Create prototypes and proofs of concept to validate solutions and inform project design. Design and document robust data models and secure, scalable solutions across Salesforce clouds, including Sales, Service, Experience, and Manufacturing Cloud. Oversee configuration, testing, quality assurance, deployment, and release management activities. Support user story development, ensuring success criteria are defined and well-documented. Engage in solution reviews and recommend architectural and performance improvements. Act as a release manager for Salesforce environments, managing deployments and ensuring alignment with DevOps best practices. Lead or contribute to project planning, scoping, and estimating efforts in collaboration with cross-functional teams. Education and Experience Bachelor's Degree in Information Technology, related field or equivalent experience required. Five (5) or more years of relevant IT experience, including two (2) or more years of relevant architecture experience required. Salesforce Solution Architecture Track certifications preferred. Deep knowledge of the Salesforce platform, Visualforce, Lightning Components (LWC) required. Background in architecting on Salesforce Experience Cloud and Manufacturing Cloud preferred. Familiarity with DevOps tools and CI/CD processes preferred. Experience leading large-scale CRM or Member Services implementations and data migration/integration activities. Preferred. Oil and Gas industry experience is a plus. Skills Agile Methodology - Agile management is an iterative approach to delivering a project throughout its life cycle, taking incremental steps towards project the completion of a project. Analytical Thinking - Strong problem-solving skills to identify architectural challenges, analyze requirements, evaluate options, and propose effective solutions. Artificial Intelligence (AI) - Artificial Intelligence (AI) refers to the simulation of human intelligence processes by machines, especially computer systems. These processes include learning (the acquisition of information and rules for using the information), reasoning (using rules to reach approximate or definite conclusions), and self-correction. AI encompasses a broad range of techniques and approaches, including machine learning, neural networks, natural language processing, computer vision, robotics, and expert systems, among others. The ultimate goal of AI is to create machines that can perform tasks that typically require human intelligence, such as understanding natural language, recognizing patterns, making decisions, and solving problems. Authentic Communicator - Expresses ideas and information, both verbally and in writing, clearly and credibly. Listens to understand and fosters constructive dialogue. Big Data Analytics - Knowledge of data analytics frameworks and technologies, such as data lakes, data warehouses, and machine learning, to design architectures that effectively handle large volumes of data and enable advanced analytics. Business Acumen - Applies knowledge of MPC's business, industry and the marketplace to advance the organization's goals. Makes decisions and recommendations clearly linked to MPC's strategy. Cloud Computing - Knowing how to manage cloud services, develop cloud applications and use cloud architecture to meet customer needs. Continuous Improvement Mindset - Identifies and leads opportunities for continuous improvement and value creation, both incremental and large-scale. DevSecOps - A set of practices that automates the integration of security at every phase of the software development lifecycle, from initial design through integration, testing, deployment, and software delivery, with an aim towards shortening the systems development life cycle and as well as continuous delivery and a security-first approach. Functional Expertise - A strong understanding of various technologies, platforms, and systems relevant to the organization's architecture, such as networking, databases, cloud computing, and security. Internet of Things (IoT) - Familiarity with IoT concepts and protocols, as well as experience designing architectures that incorporate IoT devices and enable seamless connectivity and data exchange. Machine Learning - Machine learning is a branch of Artificial Intelligence (AI) and computer science that involves the development of algorithms and statistical models that enable computers to progressively improve their performance on a specific task through learning from data, without being explicitly programmed. In essence, machine learning algorithms learn from patterns and relationships in data to make predictions, decisions, or identify patterns, often with the goal of optimizing some objective function or improving performance over time. Process Orchestration - Process orchestration refers to the coordination and management of various tasks, activities, and resources within a workflow or business process. It involves organizing, sequencing, and automating individual tasks or sub-processes to ensure that the overall process operates smoothly and efficiently. Process orchestration typically involves integrating disparate systems, applications, and services to streamline operations and improve collaboration across different parts of an organization. It often employs workflow management tools, automation software, and integration platforms to facilitate communication, data exchange, and decision-making among different components of the process. The goal of process orchestration is to optimize the flow of work, minimize delays and bottlenecks, and enhance overall productivity and performance. Solution Architecture - Solution architecture is the process of designing and describing the structure and behavior of a comprehensive solution to meet specific business needs. It involves integrating various components, technologies, and processes to create a coherent and efficient system that addresses the identified challenges or requirements. Strategic Outlook - Examines issues, generate ideas creates future scenarios and develops plans with a long-term perspective. Ensures short-term goals support long-term strategy and that organizational/functional strategy aligns with and supports MPC's overall business strategy. Systems Thinking - The process of testing conducted on a complete integrated system to evaluate the system's compliance with its specified requirements. #TACorporate MINIMUM QUALIFICATIONS: Bachelor's Degree in Information Technology, related field or equivalent experience. 5+ years of relevant architecture experience As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Additional locations: San Antonio, Texas Job Requisition ID: 00017454 Location Address: 539 S Main St Education: Bachelors: Information Technology Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ...@marathonpetroleum.com. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at .The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

A sustainable cloud infrastructure company in San Francisco is seeking a Compute-focused Site Reliability Engineer to support and optimize virtualization and performance of compute infrastructures. The ideal candidate has over 5 years of experience in Linux system engineering, strong Linux kernel knowledge, and is proficient in programming languages like Go or C. Join a team driving meaningful innovation in the AI sector while enjoying competitive compensation and a comprehensive benefits package. #J-18808-Ljbffr

A leading energy technology company seeks a Director of Strategy in San Jose, CA. This executive role involves leading strategic initiatives and defining company direction in the energy storage sector. Candidates should have over 10 years in management consulting or corporate strategy, with expertise in battery technology. The position requires excellent communication skills and an MBA or advanced degree. The expected salary range is $161,400 to $258,200, with bonuses and benefits included. #J-18808-Ljbffr

A renewable energy technology company in California is seeking a Staff Software Engineer to lead the development of Slurm as a managed cloud service. This role involves building robust software solutions for high-performance computing, requiring deep knowledge of Slurm and Kubernetes. Candidates should have over 7 years of software engineering experience with strong programming skills, particularly in GoLang. Competitive compensation is offered ranging from $185,000 to $224,000, aligning with candidate qualifications. #J-18808-Ljbffr

A technology company in Sunnyvale is seeking a Staff Hardware Systems Engineer to lead the development of system firmware and kernel-level software for high-performance server platforms. The ideal candidate has over 8 years of experience in hardware systems development and strong expertise in BIOS and firmware engineering. You will directly influence the company's future by enhancing hardware compatibility and performance. Competitive compensation and benefits are provided, including stock options. #J-18808-Ljbffr

A prominent technology company in San Francisco is seeking a Director of Executive Operations to lead its Executive Assistant function and provide direct support to the Chief People Officer. This role requires excellent leadership skills, experience in supporting senior executives, and operational oversight in a fast-paced environment. The ideal candidate will manage a team, enhance administrative workflows, and ensure high-quality support for the executive team. This position is full-time and on-site, offering competitive compensation, benefits, and opportunities for professional growth. #J-18808-Ljbffr

Crusoe's mission is to accelerate the abundance of energy and intelligence. We're crafting the engine that powers a world where people can create ambitiously with AI - without sacrificing scale, speed, or sustainability. Be a part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that's setting the pace for responsible, transformative cloud infrastructure. About the Role The Analyst, Corporate Development and M&A will play a critical role in supporting Crusoe's inorganic growth strategy across its core sectors: Power, Industrial Process and Manufacturing, Real Estate and Software. This highly visible position will be deeply involved in all phases of mergers & acquisitions (M&A), strategic investments, and structuring strategic partnerships. The ideal candidate is a high-performing professional with robust financial expertise and transaction experience. The role will report directly to the SVP of Strategic Finance and Corporate Development. This role will be required to be based in San Francisco, CA or New York, NY. What You'll Be Working On Mergers & Acquisitions (M&A) and Divestitures Market Mapping and Origination: candidate will work across the organization's business units and functions in order to identify acquisition targets from a sector-first perspective. This includes creating and maintaining market maps, thematic research projects and direct outreach to targets. Transaction Execution: Support the end-to-end M&A process, including target identification, strategic rationale development, due diligence, valuation, negotiation, and closing. Financial Modeling & Valuation: Build and maintain complex financial models (Valuation and merger model, Accretion/Dilution analyses, and precedent transaction analyses) to evaluate potential acquisition Due Diligence: Coordinate and manage cross-functional due diligence teams (Legal, Finance, Operations, etc.), synthesizing key findings and developing risk mitigation strategies. Work closely with third-party providers. Market Analysis: Conduct industry and competitive landscape analysis within the Industrials, Energy, and Real Estate sectors to identify strategic market gaps and attractive investment opportunities. Prepare and present on transaction rationale to Executive Leadership team (possibly the Board of Directors) Strategic Investments & Partnerships Sourcing and Evaluation: Evaluate strategic investment and partnership opportunities that align with the company's long-term growth objectives. Deal Structuring: Assist in the structuring and negotiation of terms for joint ventures, strategic alliances, and minority investments. Business Case Development: Create compelling investment memorandums and presentations for Senior Leadership and the Board of Directors, outlining strategic fit, financial implications, and execution plans. General Corporate Development Pipeline Management: Help manage and maintain a robust pipeline of potential M&A and investment targets. Commercial-facing Activities: attend conferences and travel to various industry events in order to aid in origination and market intelligence Reporting: Prepare detailed analytical reports and presentations on key market trends, portfolio performance, and deal progress for internal stakeholders. Cross-Functional Collaboration: Partner closely with internal business unit leaders to assess strategic needs and integration plans. What You'll Bring to the Team 1-3+ years of experience in Investment Banking (Analyst or Associate level), Corporate Development, Private Equity, or Transaction Advisory Services. Direct experience working on M&A transactions taking a core role in structuring and modeling various scenarios and preparing transaction screening memos Strong coverage experience or deep sector knowledge within Industrials, Energy, and/or Real Estate is highly preferred. Exceptional financial modeling and valuation skills, with an advanced proficiency in Microsoft Excel and PowerPoint. Outstanding analytical and problem-solving abilities, capable of translating complex financial and strategic analysis into clear, concise, and actionable recommendations. Excellent written and verbal communication skills, comfortable presenting to senior executives and external partners. High degree of professionalism, intellectual curiosity, and ability to manage multiple projects and work effectively under tight deadlines. A proactive, self-starter mentality with the ability to work independently while being a strong team player. Bachelor's degree in Finance, Economics, Accounting, or a related quantitative field. Benefits Industry competitive pay Restricted Stock Units in a fast growing, well-funded technology company Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents Employer contributions to HSA accounts Paid Parental Leave Paid life insurance, short-term and long-term disability Teladoc 401(k) with a 100% match up to 4% of salary Generous paid time off and holiday schedule Cell phone reimbursement Tuition reimbursement Subscription to the Calm app MetLife Legal Company paid commuter benefit; $300/month Compensation Range Compensation will be paid in the range of up to $100,000-$140,0000 + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicants knowledge, education, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation. #J-18808-Ljbffr

PBF Energy Inc. (NYSE:PBF) is one of the largest independent refiners in North America, operating through its subsidiaries, oil refineries and related facilities. We are seeking a talented Sr Category Leader to join our team as a pivotal member that would play a key role here at PBF Energy. This role would be located onsite at our Company headquarters in Parsippany, NJ or at one of our refinery locations. The Senior Category Leader - Turnaround and Capital is a critical leadership role within the Procurement organization responsible for developing, implementing, and managing enterprise-level category strategies for high-value activities supporting major turnarounds (TARs), outages, and capital projects across multiple refineries This role owns the full lifecycle of assigned service and materials categories, with an emphasis on opportunity identification, planning, supplier readiness, risk mitigation, stakeholder alignment, execution of strategic initiatives, long-term performance management and cost control in high-pressure, time-sensitive environments. . This position collaborates closely with site leadership, TAR and capital managers, project engineering, and contractors to ensure procurement strategies support safety, schedule, and budget requirements. The Senior Category Leader develops multi-year sourcing plans, negotiates high-value contracts, manages supplier performance, and drives continuous improvement in procurement execution for projects often exceeding $75MM in spend. They serve as a strategic advisor to the business, identifying opportunities for innovation, sustainability, and commercial advantage through deep category expertise and supplier engagement. This role will create multi-year category plans, build and maintain supplier relationships, ensures compliance with internal standards, and drives continuous improvement in value, performance, and risk management. This role requires a strong blend of commercial acumen, strategic thinking, and leadership capabilities. PRINCIPAL RESPONSIBILITIES: * Develop and maintain enterprise-wide category strategies that align with business goals for the assigned spend categories to deliver cost savings, efficiency, and risk mitigation across operations. * Analyze market trends and dynamics, commodity trends, competitor activities and operational demand and activities across multiple refinery and field sites to identify potential savings or pitfalls for Company. * Serve as the primary procurement lead for all turnaround-related sourcing and contracting activities across assigned sites. * Collaborate cross-functionally with key stakeholders, Maintenance, Turnaround and Capital Projects, etc., to align procurement strategies with business needs, develop category strategies and implement new agreements or processes. * Manage the full category lifecycle, including supplier selection, negotiations, contracting, implementation, and performance management. * Lead negotiations and contract development for critical services, including master service agreements, blanket POs, and project-specific scopes to optimize category performance. * Identify and build strategic partnerships with suppliers for ongoing turnaround support. * Monitor contractor performance, enforce KPIs, and lead post-project supplier evaluations and lessons learned * Build a best-in-class procurement playbook for turnarounds and capital projects. * Drive supplier readiness, ensuring materials and labor availability aligns with critical path schedules * Support the development of SAP catalogs, pre-negotiated rate sheets, and Track system updates to streamline TAR procurement * Manage end-to-end contract lifecycle from sourcing to execution and renewal, ensuring compliance with commercial terms, service-level agreements (SLAs), and safety/environmental requirements. * Support supply assurance by proactively identifying risks (e.g., single-source, capacity constraints, geopolitical factors) and developing mitigation plans in coordination with legal and risk teams. * Facilitate cross-site sourcing initiatives and standardization opportunities across refineries and terminals, driving total cost of ownership (TCO) improvements and eliminating non-value-added variation. * Ensure compliance with internal procurement policies, ESG/supplier diversity initiatives, and external regulatory requirements (e.g., OSHA, DOT, EPA). * Evaluate internal stakeholder feedback and implement changes to enhance the category services. * Build strong relationships with strategic suppliers and contractors, driving supplier development, innovation, and value creation while maintaining accountability for safety, quality, and performance. * Conduct thorough market research and benchmarking to create should-cost modeling, market intelligence, benchmarking, and spend analysis to support fact-based negotiations and robust category strategies to ensure vendor competitiveness trends, identify potential issues and provide actionable plans. * Utilize and maintain procurement and analytics tools (e.g., SAP, Power BI, Ariba, or similar) to monitor performance ensuring seamless strategy execution, track savings, and report out on KPIs such as cost avoidance, cycle time, compliance, and supplier performance across the organization. * Stay abreast of industry trends, emerging technologies, and macroeconomic factors (e.g., steel tariffs, inflation, labor shortages) that may impact supply markets and sourcing strategies to provide recommendations to senior management. * Provide input to annual category planning, budget forecasting, and strategic supplier reviews with senior leadership. QUALIFICATIONS: * Bachelor's degree in business, marketing or a related field or equivalent work experience. * Experience in category management within the Oil and Gas market. * 7+ years of progressive experience in strategic sourcing, negotiating, category management, or supply chain experience required * Demonstrated success leading category strategies supporting refinery operations, maintenance, and capital execution. * Deep knowledge of spend categories and contracting models (e.g., unit rate, T&M, lump sum, alliance agreements) for profitability optimization. * Familiarity with contract law, legal terms and conditions, and supplier governance frameworks * Professional Certifications in Supply Chain such as CPSM, CPSD, preferred. * Proven experience with turnaround and capital project lifecycles. * Familiarity with contractor prequalification, jobsite mobilization, and safety requirements * Experience working in a centrally led procurement model with enterprise-wide scope * Strong negotiation skills and commercial acumen with experience developing long-term supplier agreements. * Proven ability to lead cross-functional collaboration across refinery, technical, EH&S, and legal functions. * Experience working in unionized environments and with contractor safety management programs preferred. * Proficient in ERP (e.g., SAP), sourcing platforms (e.g., Ariba, Coupa), S2P systems and data analytics tools. * Knowledge of category management and demand forecasting techniques. * Ability to conduct market research. * Flexibility to adapt to the changing market and organizational priorities. * Excellent communication and negotiation skills to collaborate effectively with cross-functional teams and external stakeholders. * Willingness and ability to travel up to 25% of the time to support operations across multiple facilities in the U.S. * This position is on site 5 days a week * ONLY CANDIDATES MEETING THE ABOVE REQUIREMENTS WILL BE CONSIDERED * FOR SERIOUS CONSIDERATION, PLEASE INCLUDE YOUR SALARY REQUIREMENTS CA Job Posting Requirement: The salary range for this position is $121,160.47- $216,090.75. NJ Job Posting Requirement: The salary range for this position is $121,160.47- $200,749.41. The compensation range listed in this posting is in compliance with applicable state law. Factors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills and internal peer equity will be considered in determining the selected candidate's compensation. Salaries at the time of hire are typically in the lower to middle portion of the above range in order to provide the opportunity to reflect future performance-based increases. In addition to salary, PBF offers a comprehensive benefits package which includes bonus eligibility, health care, retirement benefits, and paid time off. We thank all respondents for their interest in PBF Holding Company LLC ("PBF Energy"), however, only those selected for an interview will be contacted. Please no phone calls or emails to any employee of PBF Energy about this requisition. Placement agencies or recruiters need not respond. All resumes submitted by search firms to any employee of PBF Energy via email, the Internet or in any method without a valid written search agreement will be deemed the sole property of PBF Energy. No fee will be paid in the event the candidate is hired by PBF Energy as a result of the referral or through other means. PBF Energy is an equal opportunity employer. We are committed to creating a diverse, inclusive environment. All qualified applicants will receive consideration for employment without regard to race, color, religious creed, sex, gender, gender identity or expression, sexual orientation, reproductive health decision making, national origin, ancestry, genetic information, physical or mental disability, medical condition, marital status, age, veteran and military status, or any other status protected by applicable law. We are committed to providing reasonable accommodations as required by law. #LI-EG1