Pcb designer jobs near me - 677 jobs

Company: Qualcomm Technologies, Inc. Job Area: Engineering Group, Analog Mixed Signal Design Qualcomm's Mixed‑Signal PHY design team is actively looking for an analog and mixed‑signal circuit designer to work on SerDes PHY designs. This designer will be involved in delivering next‑generation PHY designs for SoCs and will be part of a growing team involved in architecture analysis in leading‑edge CMOS process technology nodes at 7nm and beyond. Design goals also include low‑power analog designs to address Qualcomm's wireline interface need. Job Description: The primary responsibility of this position entails working within a team to deliver analog and mixed‑signal transistor‑level circuit designs along with supervising physical layouts of the high‑speed, low‑power PHY SerDes blocks. Experience with >32Gbps transceiver or clocking design is highly desired. Minimum Qualifications: Bachelor's Degree in Electrical Engineering with 2+ years of experience with analog or mixed‑signal integrated circuit design in nanometer planar CMOS or FinFET and 2+ years of ASIC design, verification, or related work experience. OR Master's degree in Electrical Engineering or related field and 2+ years of ASIC design, verification, or related work experience. OR PhD in Electrical Engineering or related field. 2+ years of experience using one or more design tools (e.g., CADENCE, SPICE, MATLAB, and/or Verilog/VHDL). Preferred Qualifications: PhD in Electrical Engineering or related field. 2+ years of experience in analog/mixed‑signal integrated CMOS circuit design for a specific area (e.g., VCO, PLL, and DLL design, Audio CODEC and Class D Audio amplifier design, Delta‑Sigma, SAR ADCs, Current‑Steering DACs, high‑speed DDR PHYs, high‑speed SERDES). Principal Duties and Responsibilities: Uses appropriate tools or databases to contribute to architecture and circuit designs for one or more blocks; participates in design reviews. Works with layout teams to oversee block‑level layout of one or more blocks. Defines and runs own simulations and analyses (e.g., power, performance) on designs; documents and utilizes results to improve and verify designs. Programs and runs tests to identify bugs in own work and helps more junior team members with the same; debugs most issues and escalates highly complex issues. Consults with internal or external users as directed to assist with implementation and achieve goal alignment. Maintains understanding of one's technical domain and builds understanding of other domains to ensure integration with different components. Writes detailed technical documentation and design descriptions to guide users and/or customers. Collaborates with team members to generate ideas. Level of Responsibility: Working under some supervision. Taking responsibility for own work and making decisions with limited impact; impact of decisions is readily apparent; errors made typically only impact timeline (i.e., require additional time to correct). Using verbal and written communication skills to convey basic, routine factual information about day‑to‑day activities to others who are fully knowledgeable in the subject area. Working within prescribed budget and resources. Completing most tasks with multiple steps which can be performed in various orders; some planning and prioritization must occur to complete the tasks effectively; mistakes may result in some rework. Exercising creativity to draft original documents, imagery, or work products within established guidelines. Using deductive problem solving to solve moderately complex problems; most problems have defined processes of diagnosis/detection; some limited data analysis may be required. May be solicited during strategic planning period. The responsibilities of this role do not include: Providing supervision/guidance to others. Influence over key organizational decisions. Equal Opportunity Employer Statement: Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e‑mail disability-accomodations@qualcomm.com or call Qualcomm's toll‑free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. To all Staffing and Recruiting Agencies: Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. EEO Employer: Qualcomm is an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or any other protected classification. Pay range and Other Compensation & Benefits: $115,600.00 - $173,400.00 The above pay scale reflects the broad, minimum to maximum, pay scale for this job code for the location for which it has been posted. Even more importantly, please note that salary is only one component of total compensation at Qualcomm. We also offer a competitive annual discretionary bonus program and opportunity for annual RSU grants (employees on sales‑incentive plans are not eligible for our annual bonus). In addition, our highly competitive benefits package is designed to support your success at work, at home, and at play. Your recruiter will be happy to discuss all that Qualcomm has to offer - and you can review more details about our US benefits at this link. If you would like more information about this role, please contact Qualcomm Careers. #J-18808-Ljbffr

Hardware Engineer The reputation of Dell Technologies for delivering award-winning hardware is legendary and our Hardware Engineering team is at the heart of it. We design and develop analogue as well as digital hardware products - not just computer or network hardware devices but peripherals too. Recognized for our high level of technical expertise in a variety of engineering disciplines, we're involved across the development lifecycle - from research to the building, testing and delivery of completed products. Innovators in our field, we lead the way in exploring new concepts, approaches, processes, materials and components. Join us to do the best work of your career and make a profound social impact as a Senior Principal Engineer on our Hardware Engineering Team in Hopkinton, Massachusetts or Austin, Texas. As a Hardware Engineer , you'll deliver enterprise class hardware, made up of a wide range of cutting-edge technologies, to dozens of product lines and thousands of customers. You'll be exposed to all aspects of hardware and systems engineering working closely with firmware, mechanical, power and thermal engineers. Provide technical leadership to a project team developing cutting edge server and storage solutions, including AI servers used for training the leading AI models Be responsible for delivering a project architecture and concept for servers and storage, which will then be handed over to a development team as well as work with Product Management and Marketing to fine-tune requirements Work on feasibility studies, defining architecture, SI constraints, electronic computer-aided design (ECAD) and mechanical computer-aided design (MCAD) guidance and documenting key risks Strong background in electrical or computer engineering and an understanding of server architecture Experience in hardware design, analysis and debug of complex printed circuit boards (PCBAs) along with an understanding of the power, mechanical and thermal constraints. Experience working in cross-functional engineering teams Typically requires 5 to 12+ years of related experience in a professional role with a Bachelor's degree; or 5+ years with a PhD; If you're looking for an opportunity to grow your career with some of the best minds and most advanced tech in the industry, we're looking for you. Dell Technologies is a unique family of businesses that helps individuals and organizations transform how they work, live and play. Read the full Equal Employment Opportunity Policy here .

A technology company is recruiting for a remote Electronics Engineer for an AI research project. You will work asynchronously to evaluate AI models based on your professional experience in electronics. This role requires at least 4 years of experience in engineering, where you will develop prompts for AI, evaluate responses, and contribute meaningful feedback. Flexibility in hours and work location makes it an ideal opportunity for professionals. Ideal for those looking to engage with AI in their field while maintaining their current professional commitments. #J-18808-Ljbffr

Company: Qualcomm Technologies, Inc.Job Area: Engineering Group, Engineering Group > ASICS Engineering As a leading technology innovator, Qualcomm pushes the boundaries to enable next generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Design Verification Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, validate digital/analog designs and develop a comprehensive validation/verification testbench environment for projects that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions that meet performance, security, technology, and feature requirements. As a Design Verification Engineer, you will work with Chip Architects to validate the concepts of core and sub-system level micro-architectures. You will work on a selected part of the subsystem Design Verification to ensure that it functions to the standards of being launch ready for the end Product. Role and Responsibilities Work with subsystem and SOC Architects to understand the concepts and high-level system requirements. Develop detailed Test and Coverage plans based on the Architecture and Micro-architecture. Develop Verification Methodology, ensuring scalability and portability across environments. Develop Verification environment, including all the respective components such as Stimulus, Checkers, Monitors Assertions, and Coverpoints. Develop Verification Plans and Testbenches for your functional domain. Execute Verification Plans, including Design Bring-up, DV environment Bring-up, Regressions enabling all features under your care, and Debug of the test failures. Track and report DV progress using a variety of metrics, including Bugs and Coverage. Preferred Qualifications Deep knowledge of APB/AXI/SPI protocols, handshake mechanisms, cross-clock domains and clock gating. Solid understanding of memory organization, fault-tolerant design, parity schemes, error detection and error correction schemes. Advanced techniques such as: Formal, Assertions, and Silicon bring-up, is helpful. In-depth knowledge of Micro-processor functions, Network-on-Chip Architectures, and Micro-architectures. Experience in writing Testplans, portable Testbenches, Transactors, and Assembly code. Experience with different Verification Methodologies and Tools such as Simulators, Coverage collection, Gate-level Simulation, Waveform viewers, and Mixed signal Verification. Ability to develop and work independently on a Block/Unit of the design. Qualifications Minimum Experience Level should be 2+ years in SOC-level or core-level verification with good understanding of debugging either ARM-based or RISC-V based processors, good understanding of APB/AHB/AXI protocols. Must have solid understanding of SV/UVM concepts. Prior experience in any cryptographic algorithm is preferred. Must have basic understanding of UNIX commands and Python/Perl scripting Minimum Qualifications • Bachelor\'s degree in Science, Engineering, or related field and 4+ years of ASIC design, verification, validation, integration, or related work experience. OR Master\'s degree in Science, Engineering, or related field and 3+ years of ASIC design, verification, validation, integration, or related work experience. OR PhD in Science, Engineering, or related field and 2+ years of ASIC design, verification, validation, integration, or related work experience. Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm\'s toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). To all Staffing and Recruiting Agencies: Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. EEO Employer: Qualcomm is an equal opportunity employer; all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or any other protected classification. Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. Pay range and Other Compensation & Benefits: $140,000.00 - $210,000.00 The above pay scale reflects the broad, minimum to maximum, pay scale for this job code for the location for which it has been posted. Salary is only one component of total compensation at Qualcomm, which also includes a discretionary bonus program and potential RSU grants. Our benefits package supports success at work, at home, and at play. Your recruiter can discuss details, and you can review more about US benefits at this link. If you would like more information about this role, please contact Qualcomm Careers. #J-18808-Ljbffr

Electrical Design Engineer (MEP) Houston, Texas $90,000 - $110,000 + Training + Career Progression + Support to Gain PE License + Bonus + Fantastic Benefits + Tuition Reimbursement + Work-From-Home Fridays! Are you an electrical engineer looking to work on exciting commercial MEP projects, with excellent training and a clear progression pathway to becoming a PE? This is an excellent opportunity to be the go-to electrical engineer on various technical construction projects, with the chance to progress into a Project Management position and gain your PE license. This growing company specializes in designing MEP systems for commercial projects. Due to their long-term expansion plans, they are looking for an Electrical Engineer to serve as a technical expert on diverse projects. They will also fund your PE license, granting you the opportunity to further advance your career. In this role, you will be based in the office, where you will be responsible for designing construction documents, producing electrical schematics and drawings, handling RFI documents, and liaising with clients and architects to meet project requirements. This is a great opportunity for an electrical engineer who wants to obtain their PE license and advance within a company that actively invests in its employees while working on technically challenging commercial projects. The Role: Serve as the technical expert for MEP systems in commercial projects Design electrical systems, liaise with site staff, and conduct site visits Office-based The Person: Electrical Engineer Degree in a relevant field Aspires to become a Professional Engineer

Our Mission is to Identify, Hire, Train and Retain the very best people! Could that be you? Join the Ace Electric team for opportunities to work with the best team and build your career with Ace University! Since our inception in Valdosta, GA in 1975, Ace has been performing quality electrical installations in a full range of markets including: commercial, mission critical, education, healthcare, institutional, industrial, correctional facilities, hospitality, military bases, retail and others. In the past 15 years, locations have been added in Macon, GA, Atlanta, GA, Jackson, TN, Statesboro, GA, Sanford, NC and Plain City, OH. Ace offers fabrication services, hard bid, design-build, negotiated contracts and fee-based work. We have the resources, professional staff and project management team to handle almost any type of electrical project. Our history of safety and quality has been established through years of successful projects and satisfied customers. Ace Electric is growing bigger in business each year and has no signs of slowing down! Benefits: Health, Dental, Vision, Life, Disability, Accident and Critical Illness Insurances 401k with Match Access to Ace University: Apprenticeship Program, Leadership Training, Skill Building Classes and much more! General Summary: The Preconstruction Manager will be responsible for leading the preconstruction phases of project for their assigned division that includes sales, project design, budget and managing the bidding process. The Preconstruction Manager will report to the Division Manager. Preferred Job Skills: Proven ability to work in a fast paced and ever-changing environment. Good verbal and written communication skills. Desire to learn and willingness to try new techniques. Proficient computer skills (Microsoft Word, Excel, Spectrum, Accubid, Accubid Anywhere, Bluebeam etc.). Ability to focus on details while still maintaining a big picture perspective. Proven ability to develop and work as member of a team. Good understanding of the NEC, and Electrical Theory. Ability to read and understand construction specifications and detailed drawings. Proven ability to develop and follow construction schedules. Mandatory Hiring Requirements: References, Background Check, Drug Screen Testing, Valid Driver's License. Responsibilities: Lead all preconstruction services including sales, design, budgeting, and bidding Review the scope of construction work to be completed to determine the type of work, basic materials, project duration and define the responsibility for construction. Contribute in a meaningful way to value engineering and alternatives in proposals Reconcile estimates with consultants and design team members. Prepare and Present Conceptual Estimating Assist in all business development meetings Coordinate and evaluate feedback from departments within the company (Operations, Accounting etc.), the project Owner and the project Architect during the estimating and construction process. Review all estimates and scope of work/proposal submissions. Provide superior customer service. Understand and be able to communicate scope of contract to your supervisors, clients, and subcontractors. Position Requirements: License: Valid state driver's license as required by job conditions or by the company. Certification: None required. Education: High School Graduate or GED. Bachelor's degree preferred. Experience: Minimum of 7 years of experience in construction estimating and preconstruction management required. Working Conditions: Work in a climate-controlled office setting with varying degrees of stress and time pressure. Considerable amount of time making repetitive motions. Considerable amount of time sitting. Considerable amount of time using telephone and computer. Sounds and noise levels may be distracting or uncomfortable. Required Physical/Mental Functions: Comprehend and practice safe work procedures as outlined in Company Safety Handbook. Operate company vehicle. Read and interpret instructional manuals and written instructions. Must hear and see well (either natural or with correction). Must be able to bend, stoop, squat, kneel, push, pull and reach overhead. Able to lift objects weighing up to 30 pounds, with frequent lifting and carrying of objects weighing up to 20 pounds. Tolerant to prolonged sitting. Repetitive use of arms, hands, and fingers AAP/EEO Statement: Ace Electric, Inc. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identification, national origin, disability status, protected veteran status, or any other category protected by federal, state, or local law.

Second Order Effects (SOE) is an engineering consulting firm that specializes in electrical, electromechanical, and embedded systems. Founded in 2016, SOE has grown from a 3-person operation to a team of over 40 members across offices in El Segundo, California and Redmond, Washington. Over the last nine years, we have completed over 250 projects and serviced over 100 different customers. Our designs control rocket engines, manage satellite communications, instrument fusion reactors, and are enjoyed by consumers around the world. The only thing we won't build are weapons. Second Order Effects practices a “first principles approach” to technical problems. We break down complex challenges to their most fundamental components. This enables us to find solutions across industries, use cases, and engineering functions. As an engineering consulting firm, we focus on solving the right problems and building teams to take them on. Going beyond just resolving tough issues, we want to answer impactful questions. How do we do this? We empower others, build the right thing, lead with curiosity, and own the outcome. Learn more at soeffects.com! Team Overview: PCB Design at SOE is a growing discipline, built on the same pioneering spirit that launched our earliest innovations. From tightly routed RF front-ends to power-dense, mixed-signal architectures, our layouts are integral to the success of systems with demanding mechanical, thermal, and EMI constraints. Many of our designs carry space flight heritage, supporting aerospace missions where reliability is non-negotiable. Joining the Electrical Engineering team as a PCB Designer means working in a collaborative, fast-moving environment where precision and ownership matter. We thrive on solving complex interdisciplinary challenges and supporting each other's technical and professional growth. We're excited to have you onboard. Job Overview: As a PCB Designer II, you will take ownership over the creation of high-performance circuit board layouts and work closely with interdisciplinary project teams to achieve the project goals and meet desired specifications. You will be responsible for not only producing high-quality layouts but also for anticipating risks, evaluating trade-offs, and driving design decisions that balance technical rigor, schedule, and business needs. Ideally, you are an enthusiastic problem solver who can learn, invent and execute creative solutions to drive forward difficult projects. What You Will Do: Own the design of PCB layouts from concept through manufacturing handoff for a variety of applications, including power electronics, RF, mixed-signal, and high-speed digital designs Ensure manufacturing readiness of boards by applying Design for Manufacturing (DFM) best practices, performing design rule checks (DRCs), and interfacing directly with PCB fabrication and assembly vendors to resolve issues Produce consistently high-quality layouts and footprints aligned with IPC standards and SOE best practices Identify opportunities to improve PCB design processes, libraries, and documentation, and share lessons learned to elevate team effectiveness and design quality Collaborate with electrical, mechanical, and SI/PI engineers to optimize layouts for thermal, EMI, and mechanical integration Inspect incoming PCBAs, working with engineering to understand and address any footprint- or layout-related issues, and synthesizing takeaways to feed back into our process and improve future designs What You Will Need: Bachelor's Degree (Electrical Engineering, Computer Science, Physics, Math, related field) Hands-on professional experience with professional ECAD tools, such as Altium Designer, KiCad, Cadence, PADS, etc. Demonstrated ability to translate requirements into manufacturable PCB layouts Understanding of PCB specifications and properties: stackup & materials, trace/space, via sizing, impedance, transmission lines, trace capacity & sizing, propagation delay, etc. Excellent written and verbal technical communication skills Basic computer skills, proficient with common word processing, spreadsheet and presentation tools Comfort working across multiple projects, adapting to changing requirements, and making informed decisions with incomplete information What Would Be Useful: Expertise with Altium Designer or KiCad Experience with library configuration management (e.g., Altium Vault, database libraries, or PLM systems) Experience with either high-density, high-layer-count or large-format PCB designs, preferably for aerospace, automotive, and/or medical applications Experience with HDI stackups: blind & buried vias, via-in-pad, escape routing of dense BGAs Familiarity with IPC and JEDEC standards Experience with Git and/or SVN for revision control Benefits Compensation range of $118,860-$148,580 + equity incentive plan Flexible work hours and work from home policy 100% employer-paid health insurance (Medical, Dental, Vision) for employees + 50% dependent coverage Unlimited paid time off policy, 11x paid company holidays, 12x paid sick days 401(k) retirement account and employer matching (Safe Harbor 4%) Generous paid parental leave Relocation assistance available if 50+ miles away from the office Catered lunches, snacks, and accessible kitchen Additional Requirements Applicant must be willing to work 40 hours a week on-site in Redmond, Washington, USA Applicant must be eligible to work on export controlled projects Job Type: Full-time (Salary) Export Control Requirements: To conform with U.S. Government export control regulations, including the Export Administration Regulations (EAR), you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Unfortunately, we are unable to provide sponsorship at this time. If you don't meet 100% of the preferred skills and experience, we encourage you to still apply! Second Order Effects is proud to be an Equal Opportunity Employer; employment with SOE is governed on the basis of excellence and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

Job DescriptionDescription: The PCB Designer/Engineer II will be required to perform design services and other related product development and/or product commercialization support services as related to Printed Circuit Board Design/Layout. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. · Develops engineering/product concepts that are high-quality, cost-appropriate, and satisfy the customer's requirements while establishing an area of technical specialty and mentoring others on the team (in-discipline). · Utilizes appropriate tools and equipment to perform necessary design work including design creation, design analysis, and design verification. · Demonstrates skill in multiple phases of the full product realization process, as it applies to their role. · Demonstrates the ability to work independently within at least one phase for the Product Realization Process, without direction from mentors or functional management. · Produces comprehensive project documentation in accordance with the quality and change management procedures and guidelines. QUALIFICATIONS * Minimum of 3 years of related experience is required; Three (3) or more years of related experience is preferred. · Intermediate Computer Skills · Intermediate Decision-Making, Problem-Solving Skills · Intermediate Verbal and Written Communications Skills · Strong Analytical Skills · Strong Cross-Discipline Development Knowledge · Strong Understanding of Structured Design · Ability to develop good working relationships with team members and customers · Lab test/measurement equipment · Lab tools · General office equipment and materials Requirements: EDUCATION and/or EXPERIENCE An associate degree or bachelor's degree in engineering is preferred. Industry equivalent experience in excess of minimum qualifications would suffice to offset education requirements. PHYSICAL DEMANDS The work setting should consist of an office environment with suitable lighting, comfortable temperatures, and a low noise level. Working from a home office is permitted. This document does not represent a contract of employment and is not intended to capture every possible assignment the incumbent could be asked to perform.

***Sponsorship or relocation assistance will not be provided for this position. All qualified candidates must be U.S. citizens or green card holders*** The candidate will be involved in all areas of embedded systems and circuit design, from following an architecture and inputting requirements to development / functional implementation (including circuit layout). Designs will be simulated/evaluated for functional performance, signal integrity, and power supply sensitivity, and integrated into the final product by interfacing with RF, Digital, and Software design teams. These teams may be within the local design center or other Nokia design centers around the world. You will participate in analysis and solving complex engineering problems. You have: Associate degree or two-year technical diploma in a related field, with proficiency in Microsoft tools such as Excel and Word. Familiarity with digital and RF circuit layout techniques; experience with Mentor/Expedition tools is a plus. Self-driven and proactive in acquiring PCB layout tool expertise, with the ability to apply knowledge independently and with minimal supervision. Positive attitude and strong collaboration skills; able to work effectively in a team environment and communicate progress clearly. Capable of managing multiple tasks simultaneously while maintaining focus on project schedules and delivering on time. It would be nice if you also had: Excellent verbal and written communication skills, and able to plan and organize tasks. Technical leadership potential is a plus. Adept Problem Solver Ability to travel internationally at short notice if needed (travel overall expected to be less than 10% of the time) Contribute to general PWB (Printed Wiring Board) design by placing components, routing signals, and performing Design for Manufacturability (DFM) checks in collaboration with the broader design team to support product development. Responsibilities may include schematic entry, layout execution based on design engineer guidance, board release activities, and responding to fabrication-related engineering inquiries. Typical daily tasks include initial component placement and signal routing, generating design variants, updating board versions, conducting DFM checks, and preparing documentation required for board release. Actively participate in PWB design reviews and maintain regular communication with program managers to report progress and support project milestones. Collaborate closely with multiple design engineers across different areas of the project to ensure alignment and successful execution of design goals. For candidates with an interest in process improvement, there is potential to explore automation opportunities within the board design workflow.

Job Title: PCB DesignerJob Description We are seeking a skilled PCB Designer to layout PCB designs using Cadence tools and associated software. The role involves designing layouts for standard and dense, high-speed, multi-layer boards, performing proper dimensioning, and designing standard parts. You will also be responsible for preparing and processing basic engineering changes to existing drawings and creating engineering documentation, including CAD modeling, fabrication, and drawings. Additionally, you will resolve moderately complex design issues by providing consultation and support to engineering, suppliers, and manufacturing. Responsibilities * Layout PCB designs using Cadence tools and associated software. * Design layouts for standard and dense, high-speed, multi-layer boards. * Perform proper dimensioning and design of standard parts. * Prepare and process basic engineering changes to existing drawings. * Create engineering documentation, including CAD modeling, fabrication, and drawings. * Resolve moderately complex design issues by providing consultation and support to engineering, suppliers, and manufacturing. Essential Skills * Experience with PCB design using Cadence tools. * Familiarity with IPC-4101, IPC-6012, and related standards. * Associates degree in Engineering CAD Technology or equivalent experience. * 2+ years of relevant experience. Additional Skills & Qualifications * Power Integrity. Work Environment Join a small team of about 10 people, focusing on creating customer boards and schematics. Enjoy a small company feel with the stability of a privately held business. Benefit from a family-like atmosphere and profit-sharing opportunities. You will be working with advanced technology that contributes to AI power products. Job Type & Location This is a Permanent position based out of Minneapolis, MN. Pay and Benefits The pay range for this position is $80000.00 - $950000.00/yr. PTO, Profit sharing, Paid training, 401K match. Workplace Type This is a fully remote position. Application Deadline This position is anticipated to close on Jan 29, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

About Us Working with our business partners to create, improve and sustain industry and infrastructure. Orbital Engineering, Inc. (Orbital) has been driven by this core purpose for more than 50 years - energizing Orbital team members and helping our clients solve challenging and complex problems with innovative engineering, inspection, and construction solutions. Orbital team members are guided by the fundamental beliefs of building trusted relationships, personal accountability, innovation, and excellence in everything we do. Orbital is looking for others to join our team to continue activating our purpose and embrace our values. Overview Orbital Engineering, Inc. is currently seeking a Substation Protection & Control Designer to support our Substation Engineering & Design team in a REMOTE WORK role. Responsible for development of substation design packages for clients across the US. Primary responsibilities include creating electrical protection & control design deliverables. Projects range in size, complexity, and voltage class from small distribution equipment upgrades to large transmission projects. Depending upon the complexity of the project, the candidate may prepare, provide guidance, or assist in preparing and developing drawing packages for electric substation projects. Responsibilities * Utilizes understanding of the NEC, NESC, NEMA, ANSI, IEEE, industry standard work practices, client standards, and/or other applicable guidelines to complete engineering designs. * Provide technical support for clients and support regional business development initiatives as a technical resource under the direction of the Department Manager. * Work in a project team environment with other engineers, designers, and drafters involved in detailed electrical design of utility substation projects. * Support teams of designers and drafters and assume responsibility for their success on projects. * Support Pre-bid walkdowns with clients, prepare, review, and approve proposals and project estimates for new client projects. * Develop substation drawings with input from engineers, other drawings, scope documents, with high accuracy in quality. * Modify or develop various substation protection and control drawings. * Mentor team of designers. * Prepare new drawing packages, modify existing packages and complete as-built documents. * Responsible for substation design drawings and package quality review. * Perform quality reviews and peer checks as assigned. * Train, develop and mentor less-experienced design team members. * Perform other substation design related assignments as needed. * Work with Project Management team to develop project plans and provide project updates. Qualifications * High School Diploma * Position to be filled at an appropriate level according to candidate experience. * Designer I 1+ years related experience * Designer II 5+ years related experience * Senior Designer I 7+ years related experience * Senior Designer II 10+ years related experience * Drafting and detailing experience with AutoCAD and/or MicroStation. * Proficiency with NESC, IEEE, and other relevant codes and standards. * Knowledge of drafting standards, techniques and procedures. * Proficiency with the manipulation of vector and raster drawing files in AutoCAD and MicroStation. * Ability to create and/or modify drawings from markups with a high level of attention to detail. * Demonstrated ability to effectively organize multiple complex assignments and competing priorities to produce accurate products on time. * Ability to collaborate in cross-functional work teams. * Experience in creating and reviewing substation design drawings. * Proficient with current software applications used to perform substation design work. * Ability to successfully work with remotely located team members. * This position requires the ability to pass a post-offer drug (including marijuana) and alcohol test in compliance with Federal regulations and is also subject to random testing as a condition of continued employment. Orbital Engineering, Inc. has provided worldwide professional engineering and consulting services since 1969. Our commitment to quality, responsiveness, and attention to detail has earned us the reputation as a leading provider of engineering and design services. A commitment to excellence and hard work will be rewarded with a competitive salary, career advancement opportunities, and an excellent benefits package including medical, dental, vision, prescription drug, 401(k), and supplemental insurance. Orbital Engineering, Inc. is an Equal Opportunity Employer, EEO/AA/M-F-V-D. Orbital Engineering, Inc. seeks diversity among its employees. Reasonable accommodations may be made to enable individuals to perform the essential job functions. SUB00001798 #LI-CV1

About Us Working with our business partners to create, improve and sustain industry and infrastructure. Orbital Engineering, Inc. (Orbital) has been driven by this core purpose for more than 50 years - energizing Orbital team members and helping our clients solve challenging and complex problems with innovative engineering, inspection, and construction solutions. Orbital team members are guided by the fundamental beliefs of building trusted relationships, personal accountability, innovation, and excellence in everything we do. Orbital is looking for others to join our team to continue activating our purpose and embrace our values. Overview Orbital Engineering, Inc. is currently seeking a Substation Protection & Control Designer to support our Substation Engineering & Design team in a REMOTE WORK role. Responsible for development of substation design packages for clients across the US. Primary responsibilities include creating electrical protection & control design deliverables. Projects range in size, complexity, and voltage class from small distribution equipment upgrades to large transmission projects. Depending upon the complexity of the project, the candidate may prepare, provide guidance, or assist in preparing and developing drawing packages for electric substation projects. Responsibilities Utilizes understanding of the NEC, NESC, NEMA, ANSI, IEEE, industry standard work practices, client standards, and/or other applicable guidelines to complete engineering designs. Provide technical support for clients and support regional business development initiatives as a technical resource under the direction of the Department Manager. Work in a project team environment with other engineers, designers, and drafters involved in detailed electrical design of utility substation projects. Support teams of designers and drafters and assume responsibility for their success on projects. Support Pre-bid walkdowns with clients, prepare, review, and approve proposals and project estimates for new client projects. Develop substation drawings with input from engineers, other drawings, scope documents, with high accuracy in quality. Modify or develop various substation protection and control drawings. Mentor team of designers. Prepare new drawing packages, modify existing packages and complete as-built documents. Responsible for substation design drawings and package quality review. Perform quality reviews and peer checks as assigned. Train, develop and mentor less-experienced design team members. Perform other substation design related assignments as needed. Work with Project Management team to develop project plans and provide project updates. Qualifications High School Diploma Position to be filled at an appropriate level according to candidate experience. Designer I 1+ years related experience Designer II 5+ years related experience Senior Designer I 7+ years related experience Senior Designer II 10+ years related experience Drafting and detailing experience with AutoCAD and/or MicroStation. Proficiency with NESC, IEEE, and other relevant codes and standards. Knowledge of drafting standards, techniques and procedures. Proficiency with the manipulation of vector and raster drawing files in AutoCAD and MicroStation. Ability to create and/or modify drawings from markups with a high level of attention to detail. Demonstrated ability to effectively organize multiple complex assignments and competing priorities to produce accurate products on time. Ability to collaborate in cross-functional work teams. Experience in creating and reviewing substation design drawings. Proficient with current software applications used to perform substation design work. Ability to successfully work with remotely located team members. This position requires the ability to pass a post-offer drug (including marijuana) and alcohol test in compliance with Federal regulations and is also subject to random testing as a condition of continued employment. Orbital Engineering, Inc. has provided worldwide professional engineering and consulting services since 1969. Our commitment to quality, responsiveness, and attention to detail has earned us the reputation as a leading provider of engineering and design services. A commitment to excellence and hard work will be rewarded with a competitive salary, career advancement opportunities, and an excellent benefits package including medical, dental, vision, prescription drug, 401(k), and supplemental insurance. Orbital Engineering, Inc. is an Equal Opportunity Employer, EEO/AA/M-F-V-D. Orbital Engineering, Inc. seeks diversity among its employees. Reasonable accommodations may be made to enable individuals to perform the essential job functions. SUB00001798 #LI-CV1

About the Company Since 2001, our company has focused on delivering high-performance, custom-engineered solutions for low-humidity and dehumidification applications. With a strong emphasis on innovation, quality, and customer service, we specialize in designing advanced systems for critical environments such as pharmaceuticals, food processing, aerospace, and more. Our mission is to enrich customer operations through flexible, value-driven solutions, backed by a collaborative and growth-minded team culture. What We're Looking For: We're seeking a detail-oriented and motivated Junior Electrical Controls Designer who's passionate about innovation and hands-on engineering. This role will support electrical design efforts across custom HVAC and dehumidification systems. The ideal candidate will bring a strong foundation in electrical design and PLC logic, along with a desire to grow into a highly skilled contributor on a fast-moving team. Key Responsibilities: Design accurate electrical schematics for custom equipment Ladder logic diagrams using CAD PLC programming with Carel Software Apply NEC and UL standards to all electrical designs Select appropriate system components (motors, circuit breakers, relays, VFDs, controllers, etc.) and present selections to Purchasing in Excel Assist with creating production standards and procedures Contribute to continuous improvement and R&D initiatives Support PLC-based control system development Experience with Carel and Automation Direct (DirectLOGIC) required Familiarity with Allen Bradley, Siemens, and related platforms is a plus Assist with field service questions and customer support Occasional travel to customer sites may be required Basic Qualifications: 2+ years in an electrical design or engineering role Intermediate proficiency in creating electrical schematics Familiarity with HVAC or refrigeration systems Proficient in AutoCAD (SolidWorks Electrical is a plus) Good technical writing and communication skills Self-driven, detail-focused, and collaborative work style Critical thinking and problem-solving capabilities Preferred Qualifications: Bachelor's degree in Engineering (Electrical or similar field) Experience in HVAC or refrigeration design (2+ years) 2+ years of PLC programming experience Knowledge of Microsoft Office, Excel, PowerPoint Exposure to LEAN, 6S, or process improvement methodologies Job Details: Job Type: Full-time Schedule: Monday-Thursday (40-hour workweek); occasional OT; minimal remote work Travel: Rare (approx. 5%) Experience Level: Early career (2+ years) Compensation & Benefits: Salary based on experience 401K with company match Health insurance Paid time off and sick leave Professional development support Team-building events and lunches Individual and company performance bonuses 4-day work week (Mon-Thurs) Work Authorization: U.S. Citizen or Permanent Resident

Come be DISRUPTIVE with us! At Milwaukee Tool, our most valued resource is our dedicated team of employees - employees who work with a passion to be the best and have an unparalleled pride in their work and in the Milwaukee brand. We know that the only way to sustain growth and success is to value the growth and success of each person within the organization that's why we invest in an individual's growth and development from day one. All our teams touch every step of the process, that is why our Engineering teams are some of the key contributors to our continuous innovations. The fast-paced, agile environment continuously delivers disruptive technologies by providing every team with the resources needed to excel and working directly with End Users to understand how to deliver heavy duty products with high performance. We create Best in Class products by leveraging advanced analysis tools, extensive testing regimes, state-of-the-art manufacturing processes and cross-functional agility. To learn more about the Milwaukee story and our company click HERE. The Electrical Designer II will be a part of the PCB Design team and will play a role in the development of our power tool electronics. As a member of the PCB Design team you will utilize Altium design tools at an expert level. You will be challenged to expand your technical skills in PCB design and learn to communicate complex layout topics with Engineers and Sr. Designers. You'll also be DISRUPTIVE through these duties and responsibilities: Work with Engineers & Senior Electrical Designers to design Printed Circuit Board Assemblies (PCBA) for AC & DC circuits in new and existing products. Proficiency in PCB layout tasks such as: definition of PCBA dimensions based on system design constraints, circuit block arrangement (floor-planning), power and ground plane creation, component placement, and routing of signal nets to minimize cost and maximize design for manufacturability, reliability, thermal management, and test (DFx). Apply both general as well as project specific Design Rules and resolve DRC errors. You will also learn to create & modify both general as well as project specific Design Rules and resolve DRC errors. Prepare and present PCB designs for technical review in compliance with Milwaukee Design Processes. Generate PCB document packages in compliance with Milwaukee standards. Work closely with PCB vendors to source prototypes from our design files (either 1-up or panelized) if required. Participate in component library maintenance including creation of component footprints, generation of schematic symbols, 3D models and entry of new parts in the Electronics CAD (ECAD) library. Complete ECAD/MCAD file transfer & work with members of the mechanical design team to achieve excellence in system design and quality. Complete selected IPC or other training to enhance your knowledge & design skillset. Commit to successful completion of CID training What TOOLS you'll bring with you: Associate Degree in a technical discipline. 2+ years of applicable experience in PCBA design and assembly. Experience in the use of professional level PCB CAD tools used for high volume PCB design, preferably Altium. Basic understanding of electronics. Highly detailed oriented, organized, and able to work in a team environment. Proficiency with Microsoft business software. Must have good interpersonal, verbal and written communication. Other TOOLS we prefer you to have: 2+ years of experience working with high production volume PCBAs typical of consumer products. We provide these great perks and benefits: Robust health, dental and vision insurance plans. Generous 401 (K) savings plan. Education assistance. On-site wellness, fitness center, food and coffee service. And many more, check out our benefits site HERE. Milwaukee Tool is an equal opportunity employer.

SIGNAL ENERGY Job Profile: Electrical Designer - Utility-Scale Solar Department: Engineering - Electrical Reports To: Manager / Senior Electrical Engineer FLSA Status: Exempt Position summary The Electrical Designer develops and coordinates complete AC and DC design packages for utility-scale solar and BESS projects, from early design through Issued-for-Construction (IFC) deliverables. This role supports both Engineer-of-Record (EOR)-led and in-house engineering efforts and ensures that designs meet project scope, schedule, budget, safety, quality, and constructability requirements in alignment with Signal Energy's core principles. Essential duties and responsibilities Lead the development of PV array and BESS electrical design packages from concept through IFC, including single-line and three-line diagrams, conduit and cable schedules, and wiring details for utility-scale projects. Prepare detailed DC collection layouts (stringing plans, combiner boxes, DC feeders) and AC collection layouts (inverters, MV transformers, MV feeders, and terminations) to achieve performance and cost objectives. Perform core electrical design calculations including string sizing, voltage drop, conductor and raceway sizing, short-circuit, equipment ratings, grounding, and overcurrent protection in accordance with applicable codes and standards. Interpret and implement project design criteria, owner requirements, utility interconnection requirements, and site-specific conditions into cohesive, constructible design documentation. Produce plan and detail drawings in AutoCAD (and related tools), including equipment layouts, raceway routing, trench and duct bank details, cable routing plans, vaults, terminations, and grounding diagrams. Coordinate closely with civil, structural, high-voltage, BESS, and construction teams to resolve spatial conflicts and ensure electrical designs are fully integrated with grading, roads, drainage, and foundations. Support preliminary and detailed energy modeling (e.g., PVSyst or similar) by providing accurate design assumptions, losses, and equipment configurations to optimize system performance and reliability. Assist in preparing permit, interconnection, and construction submittal packages, including drawing sets, calculations, and responses to AHJ, utility, and client comments. Provide construction-phase design support including RFI responses, design clarifications, redline incorporation, and updates to as-built documentation. Contribute to the development and continuous improvement of Signal Energy's standard details, design tools, workflows, and best practices for utility-scale solar and BESS projects. Attributes and competencies Strong technical foundation in power systems and utility-scale solar/BESS electrical design, including DC/AC collection, grounding, overcurrent protection, and interconnection concepts. Comfortable interfacing with clients, EORs, utilities, construction teams, and internal stakeholders, with clear written and verbal communication skills for technical reports, RFIs, and design justifications. Proficient in AutoCAD (or equivalent CAD platform) for electrical design; familiarity with PV modeling tools (PVSyst, Helioscope) and power system analysis software (ETAP, SKM, or similar) is preferred. Able to manage multiple concurrent projects and deadlines, balancing quality, speed, and cost in a fast-paced EPC environment. Collaborative and solutions-oriented team member who operates with integrity and a focus on safety, constructability, and long-term asset performance. Self-motivated, organized, and driven to continuously improve design standards, tools, and processes. Education and experience Bachelor's degree in Electrical Engineering, Renewable Energy, or related discipline; equivalent relevant experience in utility-scale solar design may be considered in lieu of degree. 5+ years of experience in solar PV or power systems design, with at least 3 years focused on commercial, industrial, or utility-scale solar and/or BESS. Working knowledge of NEC and NFPA; familiarity with NESC, IEEE, and utility interconnection standards is strongly preferred. EIT or PE license, and/or NABCEP PV Design or PV Installation certification preferred but not required. Work environment and location Primary location is Signal Energy's Houston, TX office, with a “Houston-first” approach to hiring and team collaboration. Remote work from other U.S. locations may be considered for highly qualified candidates, with periodic travel to Houston and project sites as needed (up to approximately 10%). Work is performed in an office environment with occasional visits to active construction sites, requiring adherence to safety protocols and PPE use. Equal opportunity statement Signal Energy is an Equal Opportunity Employer and uses E‑Verify. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by applicable law.

Job Title: Electrical Designer Overview: We are seeking an experienced Electrical Designer to join our team in the Columbus area with pay starting at 80K. The ideal candidate will have a strong background in electrical design and be able to work on projects from concept to completion. Responsibilities: Design electrical systems for various projects, ensuring compliance with industry standards and regulations. Create and review technical drawings, specifications, and reports related to electrical design. Collaborate with the engineering team to ensure project requirements are met. Provide technical support during project execution and troubleshoot any electrical issues that may arise. Stay updated on industry trends and advancements in electrical design technology. Requirements: Bachelor's degree in Electrical Engineering or related field. Proficiency in CAD software and other electrical design tools. Strong knowledge of electrical codes, standards, and regulations. Excellent communication and teamwork skills. Ability to manage multiple projects simultaneously. Employment Type: Full-time If you are a detail-oriented Electrical Designer looking to contribute to exciting projects, we would love to hear from you. Apply now to join our dynamic team!

Job Title: Electrical Designer Reports To: Director of Engineering Department: Engineering Compensation: Salary Travel Required: Up to 5 days per year The electrical designer is responsible for design work relating to electrical control panels, power distribution panels, and other electrical controls products. This person will utilize various applications to create shop drawings, electrical schematics, and bills of material. The focus of this role is on custom control panels with unique requirements being driven by customer needs. The electrical designer is responsible for identifying suitability rated components, determining the proper wiring for components, and determining best-practice mounting methods. This role also includes some level of mechanical aptitude to spec custom enclosures and mounting brackets. Duties and responsibilities: Develop wiring schematics for electrical panels. Determine and create drawings detailing component layout and mounting positions. Create bills of material (BOMs), product descriptions, and labels for electrical panels. Identify suitable components based on ratings, dimensions, and other factors. Review customer requirements and propose possible solutions. Review and understand component datasheets and manuals. Work with manufacturing employees to understand drawings and answer questions. Design simple mechanical mounting brackets and fixtures. Develop programming routines for logic controllers (PLCs) / temperature controllers. Assist sales and application engineering with answering customer questions and solving issues. Assist with product compliance reviews and agency certifications. Perform any other duties as assigned by manager. Preferred Skills: UL 508A Training / Certification Experience with SolidWorks CAD software Experience with SolidWorks Electrical Experience with Microsoft Visio Experience with Programmable Logic Controllers (PLC) Experience with PID Temperature Controllers Needed experience & technical knowledge: Bachelor of Science in Electrical Engineering or equivalent experience. Ability to read and interpret electrical schematics and mechanical drawings. Strong working knowledge of high-voltage circuitry, including both single and three-phase applications. 3+ years of experience working with electrical panels and wiring. Ability to work with little supervision. Strong work ethic and a desire for excellence. Demonstrated ability to work with others in a dynamic environment. Physical Demands The physical demands described here and above are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions of the position. Work Environment The work environment characteristics described here and above are representative of those that an employee encounters while performing the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions of the position. Disclaimer The preceding has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this position. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time

IDEAL CANDIDATE PROFILE Electrical Designer (ED) We offer you the opportunity to put your passion and your God given talents and abilities to use. Our goal is to attract and develop skilled, called, and passionate people to impact our devoted customers and our team. We want to attract immensely creative employees with an ability to inspire, motivate, and challenge others. For more information, see ********************** Our People Strategy We believe in a people strategy to be the fundamental driver of our organization. While we can never reach a perfect organizational model, we can certainly strive towards it in our daily efforts and mission. With that vision comes a focus of key initiatives we are working on, listed here, with the indicators of what it should look like as we approach: Shared Direction: A collective understanding of what the organization stands for, where it is going, and how we will get there. Indicators: a clear inspiring vision, well-executed strategies, clear aligned goals. Authentic Values: Deeply held principles guiding all decisions and relationships and reflected in the conduct of everyone at all times. Indicators: high levels of trust and communications, uncompromising integrity and ethics, socially responsible practices. Productive Relationships: Open, collaborative relationships that recognize and honor the commitments that people make to themselves, each other, their work, and the organization. Indicators: respect for all individuals, effective problem solving and decision-making, clear accountability, effective teamwork at all levels. Liberating Processes: Flexible structures, processes, and technologies that allow people to do their best work and to collaborate effectively across boundaries. Indicators: clear organizational design, collective knowledge, the right tools and technologies, the right people for the right jobs. Outcome Learning: Results-focused learning that strengthens individual and organizational capacity to cope with the present and define the future. Indicators: continuous teaching and learning, effective knowledge and skills development, leadership development at all levels. Motivating Metrics: Fair, meaningful performance requirements, measure and rewards that reinforce high performance and manage poor performance. Indicators: clear and energizing performance requirements, relevant work measures, differentiated rewards. Our Vision - What We Want to Do Continuously improving the built environment for the glory of God. Our Mission - Why We Exist Demonstrating the love of Jesus Christ through empowering excellent AEC professionals to provide superior service. Our Values - How We Will Accomplish This Mission Our Core Values are the tools we use and the behaviors we exhibit as Employees of Above Group. They describe how we work together to achieve this special place we're developing and how they make us uniquely successful. Christian Values - We demonstrate humility, honesty, integrity, respect, kindness, and a sense of social responsibility. Uncompromising Quality - We provide excellent results all the time, every time. Buffalo - We take initiative running toward and owning challenges. Extreme Team - We are accountable to each other to continuously grow and succeed. Electrical Designer (ED) The Position The Electrical Designer for Above Group shall contribute and support the Power, Lighting, Grounding, Lightning Protection, Fire Alarm, and Systems or Low Voltage Engineering efforts for the firm. The ED shall directly contribute to the Firm and its success through drafting and design efforts. This individual shall directly contribute to the Firm and its success through technical experience to effectively produce a quality design and ultimate product to the customer. The ED shall execute drafting and design duties as required to ensure quality is always maintained. The ED is a Designer by education and experience: Ability to combine personal judgment with information to implement design criteria. Has expertise in power and lighting. Preference given to experience with grounding, lighting protection, fire alarm, communications, and electronic security systems. Demonstrates proficiency with lighting calculations, panelboard load calculations, and load demand calculations. Preference given to experience with short-circuit analysis and arc flash hazard analysis. Able to use computer software including Visual (or AGI32) and Microsoft Office. Ability to work well in a team environment and as an individual. Communicates well with individuals in the organization. Capable of interpreting information set forth in a Basis of Design, field surveys, and code research. Applies design principles to resolve design problems and tasks assigned. Develops and implements design criteria and system designs from concept through detailed design and construction. Coordinates and implements the design of distribution systems, lighting fixtures, devices, and equipment locations with team members within the discipline, as well as project team members in other disciplines. Proficient with Revit. Performs system calculations. Sizes and selects system components. Reviews shop drawing submittals, and travels to job sites to perform field verification. The ED develops organizational skills including technical writing and time management: Uses excellent writing skills to author basis of design (BOD) narratives, design criteria documents, reports, and other high quality highly technical written documents as needed. Uses excellent writing skills to edit design specifications; respond to Requests for Information (RFIs) incorporating information from project documents, specifications, shop drawings and design criteria; and prepare meeting notes. Reads relevant project correspondence and maintains project design files. Demonstrates willingness to work to meet deadlines as required by client demands. Key Characteristics of the Ideal Electrical Designer (ED) Called - A strong sense of knowing who you are (i.e., gifts, talents, competencies) and how you are to spend your life. We fulfill our calling by being excellent at what God designed us to be and we diligently pursue it. Practice Servant Leadership - Leaders at Above Group are called to serve. We realize that effective leadership starts on the inside. We demonstrate that we are willing to do what others are unwilling to do. We will practice a Servant Leadership character that enriches the lives of others. A Commitment to Above Group - An understanding of and a commitment to the special purpose, mission, and beliefs of Above Group and will have a value system compatible with our values. People Abilities - Deep interest and care for people with an understanding of their primary interests, aims, strengths, and motivations. Working with Customers - A demonstrated ability to accomplish results through collaboration with and development of strong relationships with our customers. Organizational Skills - An ability to organize his/her own thoughts and work, while continually growing a results-oriented team. Ability to win the confidence of colleagues and office staff that demonstrates a well-functioning department. Insight and Strategy - A focused sense of strategy, (i.e., possessing the knowledge and sixth sense for how to implement our mutual goals). The ability to set realistic objectives and achieve them. A Sense of Timing - An intuitive sense of timing and appropriateness in relation to people and projects. Work Capacity - Sufficient physical and emotional energy to deliver the results necessary to advance our mission. Self-Starter - Creates ideas and follow through without prodding. (Balanced with judgment and knowing when and how to ask for assistance and counsel). Enthusiasm - A heartfelt passion for the work we do, which displays optimism - but not overselling and overstating. Character - A level of impeccable integrity that permeates others. Passion - The Above Group Vision will be irresistible to the right person. People skills, organizational and communication abilities must be truly remarkable, this person will be excellent at vision-casting in a manner that inspires others to join with us and develop solid relationships. Minimum Requirements The Electrical Designer shall meet the following minimum requirements: Minimum of 3 years electrical drafting and design experience at an MEP Engineering firm or A-E firm Associates degree in Drafting and Design preferred but not required Proficient in REVIT Excellent Communication skills, both oral and written This is a remote position or can be a hybrid position for local residents who desire to work in an office environment U.S. Citizen or Permanent Resident of the U.S.

What Makes a Honda, is Who makes a Honda Honda has a clear vision for the future, and it's a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.” We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team. If your goals and values align with Honda's, we want you to join our team to Bring the Future! Job Purpose To contribute to the development of functioning prototypes that will eventually become production ATV/SxS vehicles, researching and applying new technologies to support business targets and maintaining global vehicle product quality. Key Accountabilities Develop basic component and system layouts for ATV/SxS prototype vehicles using computer-aided design software that achieve concept targets, function requirements, and manufacturing requisites with minimal supervision. Communicate specification requirements and manufacturing control points via prototype and production drawings that result in setting the final specifications of global ATV & SxS new models and mass production vehicles. Maintain accurate technical, development, and administrative documentation as required. Adhere to given cost targets for responsible parts that contribute to achievement of the vehicle development targets and achieve the cost targets through optimizing basic part/system designs and offsetting any spec changes after target fix through implementation of additional cost reduction ideas. Create and manage schedule of individual work to ensure deadlines are met, coordinate resource needs with supervisor, and effectively utilize contractor resources with minimal supervision. Consistently communicate project status and participate in project meetings, discussions, and development events. Generate basic ideas that contribute to the evolution of new technologies. Support maturation of ideas to prepare for development applications with minimal supervision. Support market quality themes under the direction of others. Utilize problem-solving methods to analyse root causes. Develop and implement C/M specs as necessary with minimal supervision. Qualifications, Experience, and Skills Minimum Educational Qualifications Bachelors Degree or equivalent in a related engineering discipline Minimum Experience : Engineering experience desired, preferably in the Powersports or Automotive field Other Job-Specific Skills Strong leadership, coaching and mentoring skills Ability to interact/communicate effectively with staff/management Must be able to operate with high level of confidentiality Competent in FTA, FMEA, dimensional tolerance stack-ups and application Competent analytical, problem solving, judgement, decision-making and prioritization Competent drawing and layout skills/techniques, include understanding of CAE principles Competent in creating a plan and schedule Competent in understand product development schedules Working Conditions Travel: Average of 1-3 times monthly. Amount varies based on project demands/responsibilities, conferences, etc.; includes possible overseas travel. Physical: Primarily works at a desk or scope; frequent keyboarding. Limited kneeling, standing, squatting, reaching or bending. Hazards: Risks found in a typical office & shop setting. May be exposed to explosives/flammables, pressurized equipment, toxic chemicals and moving parts. Overtime: Overtime expected based on project demands/responsibilities. Maintains professional conduct and follows all departmental, safety Department, and Company policies, Procedures, and rules. What differentiates Honda and make us an employer of choice? Total Rewards: Competitive Base Wages (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.) Paid Overtime Regional Bonus (when applicable) Industry-leading Benefit Plans (Medical, Dental, Vision, Rx) Paid time off, including vacation, holidays, shutdown Company Paid Short-Term and Long-Term Disability 401K Plan with company match + additional contribution Career Growth: Advancement Opportunities Career Mobility Education Reimbursement for Continued Learning Training and Development Programs Additional Offerings: Lifestyle Account Childcare Reimbursement Account Tuition Assistance & Student Loan Repayment Elder Care Support Wellbeing Program Community Service and Engagement Programs Product Programs Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.