PepsiCo jobs in Cleveland, OH - 662 jobs

PBNA $23. 65 / hour Cleans and prepares vending equipment for refurbishment and rebuilding as needed. Position prepares equipment surfaces for repainting, resurfacing or application of new decals/facings. Requires work on vending machines that weigh approximately 800 -- 1200 pounds. Lifts are used, but may be required to push, pull and move equipment as well as kneel and/or squat to work on equipment. Forklift experience helpful as well as general knowledge of hand and power tools. PRIMARY ACCOUNTABILITIES: Perform various physical duties as assigned, including but not limited to sorting, stacking, cleaning, minor repair, and/or maintenance tasks Collect accurate and complete equipment information Remove old parts Complete paperwork on job and maintain accurate maintenance records Maintain all safety standards Regular, reliable, predictable attendance BASIC QUALIFICATIONS: 18 years or older; 21 years or older if CDL Required Pass DOT physical and DOT Road Test (if applicable) Valid U. S. CDL license (if required) Follow DOT Regulations HELPFUL EXPERIENCE: No experience required For positions that require use of a personal vehicle for a sales route, mileage reimbursement is provided. Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901-4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law & View the PepsiCo EEO Policy. > All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law & EEO is the Law Supplement documents. View PepsiCo EEO Policy. Please view our Pay Transparency Statement

$2000 retention bonus paid within 1 year of employment (based on performance and eligibility) Route Sales Representatives are critical to our success at FritoLay! Our Route Sales Representatives are responsible for delivering, selling, and merchandising FritoLay's complete line of products including Lay's, Doritos, Cheetos, Tostitos, Fritos, and many more to local stores including gas stations, dollar stores, and large grocery stores. As a Route Sales Representative, you drive a FritoLay truck to different stores, work independently to unload orders, merchandise product, and partner with store managers to increase sales, order, and maintain records throughout the day. Although you will start out as a Route Sales Representative for FritoLay, we are investing in helping you grow with us. This job can open the door to career opportunities with us or our parent company, PepsiCo. In this role, here are some of the frequent tasks you will be doing: Learn the basics of the role in four to six weeks of dedicated driving and selling training with our amazing team members Run routes for team members', experience different stores, and meet new customers Grow sales on the route by building relationships, selling in displays, and completing national initiatives Attain a route with set days off/schedule with time Work in a fun, fast paced, and physical environment We operate 24 hours a day, so you may not have a typical schedule! Team members often work weekends and holidays. Our jobs are physical! If you have never worked in this type of role before, you should understand that you will be on your feet for the entirety of your shift. Here are the minimum qualifications of this job: Be 21 years of age or older Have a valid driver's license with proof of insurance and ability to obtain other licensures as required by state law Be able to frequently lift 40 lbs. with or without a reasonable accommodation As a full-time team member, you will be eligible to receive full company benefits. You can learn more about our benefits on our career site, but here are some of the benefits we offer: 401(k) contribution Health, dental and vision insurance Financial support to help obtain a degree Company discounts and perks Our application takes 20-25 minutes to finish on any device. Our mission is to get you in for an interview instead of jumping through hoops. Just keep an eye on your e-mail, and we will take care of the rest. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law & View the PepsiCo EEO Policy.

As a Project Coordinator, you will be responsible for coordinating project activities to ensure the project is on schedule. You will provide administrative and logistical support including meeting arrangement, progress tracking, and documentation. You will work independently within established procedures associated with the specific job function within the utility industry. **Responsibilities:** + Support projects team by coordinating, participating, and managing project management documentation. + Maintain action item tracking to ensure reply and action. + Assist with development, planning, and execution of meeting agendas and distributes materials. + Monitor project execution aspects to ensure timely contribution by team members. + Assist with identifying potential bottlenecks in processes and works with management team members to resolve issues. + Prepares progress reports. + Liaises with personnel and managers when performing project activities. + Performs incidental project management including planning, research, analysis and implementation of deliverables and action items. + Acts as a team lead on small projects. **Qualifications:** + Associates' Degree required; Bachelors' Degree preferred + 1 year required, 2 years preferred of direct work in project management capacity + Experience in the utility industry preferred + Interpersonal, conflict management, and negotiation skills + Problem-solving skills and the ability to analyze workflow/processes + Adept at conducting research into project-related issues + Ability to effectively prioritize and execute tasks + Strong written and verbal communication skills + Strong computer skills \#LI-A1 At Wesco, we build, connect, power and protect the world. As a leading provider of business-to-business distribution, logistics services and supply chain solutions, we create a world that you can depend on. Our Company's greatest asset is our people. Wesco is committed to fostering a workplace where every individual is respected, valued, and empowered to succeed. We promote a culture that is grounded in teamwork and respect. With a workforce of over 20,000 people worldwide, we embrace the unique perspectives each person brings. Through comprehensive benefits (**************************************************************************** and active community engagement, we create an environment where every team member has the opportunity to thrive. Learn more about Working at Wesco here (******************************************************************* and apply online today! Founded in 1922 and headquartered in Pittsburgh, Wesco is a publicly traded (NYSE: WCC) FORTUNE 500 company. _Wesco International, Inc., including its subsidiaries and affiliates ("Wesco") provides equal employment opportunities to all employees and applicants for employment. Employment decisions are made without regard to race, religion, color, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, or other characteristics protected by law. US applicants only, we are an Equal Opportunity Employer. _ _Los Angeles Unincorporated County Candidates Only: Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act._

As a Specialist - Technical Sales, you will act in a customer facing role involved in the commercial/technical decision-making process of the sales cycle. Your focus will be on identifying/closing large projects and driving incremental specialized product growth at all levels. You will provide pre and post-sales support and expertise in a specified product category to assist the sales team in their sales efforts of technical products, systems and services. You will deliver presentations and product demonstrations to customers and sales representatives. You will also have a continuing role in customer support to address customer issues in the usage of the products. **Responsibilities:** + Calls on client, management and representatives, to convince them of desirability of technical products or services offered. + Provides technical services to clients relating to specified products. + Makes sales contacts, research customer needs and provides product and application information; demonstrating technology solutions for customers. + Gathers, analyzes and shares technical information and solutions to internal and external customers. + First line of pre/post technical sales support for sales teams. + Develops expertise in specified product groups. + Participates in joint sales calls with customers and prospects. + Participates in ongoing training to maintain technical competency in product and complimentary product areas. + Understands market conditions and competitive forces. + Promotes value-add assigned products in competitive situations. + Participates in marketing, promotion programs, and product launches from product businesses. + Maintains excellent relationships with vendor product managers and other selling resources. **Qualifications:** + High School Degree or Equivalent required; Bachelors Degree - Engineering or Business preferred + 1+ years industry experience as manufacturer or distributor preferred + 3+ years Sales experience in related industry + Strong computer skills + Excellent communication skills \#LI-A1 At Wesco, we build, connect, power and protect the world. As a leading provider of business-to-business distribution, logistics services and supply chain solutions, we create a world that you can depend on. Our Company's greatest asset is our people. Wesco is committed to fostering a workplace where every individual is respected, valued, and empowered to succeed. We promote a culture that is grounded in teamwork and respect. With a workforce of over 20,000 people worldwide, we embrace the unique perspectives each person brings. Through comprehensive benefits (**************************************************************************** and active community engagement, we create an environment where every team member has the opportunity to thrive. Learn more about Working at Wesco here (******************************************************************* and apply online today! Founded in 1922 and headquartered in Pittsburgh, Wesco is a publicly traded (NYSE: WCC) FORTUNE 500 company. _Wesco International, Inc., including its subsidiaries and affiliates ("Wesco") provides equal employment opportunities to all employees and applicants for employment. Employment decisions are made without regard to race, religion, color, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, or other characteristics protected by law. US applicants only, we are an Equal Opportunity Employer. _ _Los Angeles Unincorporated County Candidates Only: Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act._

As a Project Manager II, you will manage and oversee all aspects of a project to ensure it is completed on-time and within budget. You will have overall responsibility for managing scope, cost, schedule, internal staffing and outside vendors. You will prepare reports for upper management regarding status of projects. You will gain exposure to some of the complex tasks within the job function while occasionally directed in several aspects of the work. **Responsibilities:** + Directs and manages project development from beginning to end. + Defines project scope, goals and deliverables to support business goals in collaboration with senior management and stakeholders. + Develops full-scale project plans and associated communications documents. + Communicates project expectations to team members and stakeholders. + Liaise with project stakeholders on an on-going basis. + Estimates resources and participants needed to achieve project goals. + Develops employees to be self-sufficient in continuous improvement tools. + Functions as leader for continuous improvement events. + Aligns activities with corporate goals around safety, quality, delivery and cost. + Performs root-cause analysis on gaps, identifies waste, and works with leadership to drive sustainable corrective action. + Drafts and submits budget proposals, and recommends subsequent budget changes. + Negotiates with other department managers for acquisition of required personnel. + Determines and assesses need for additional staff or consultants and makes appropriate staffing adjustments during project cycle. + Sets and manages project expectations with team members and other stakeholders. + Delegates tasks and responsibilities to personnel. + Identifies and resolves issues and conflicts within project team. + Identifies and manages project dependencies and critical path. + Plans and schedules project timelines and milestones using appropriate tools. + Tracks project milestones and deliverables. + Develops and delivers progress reports, proposals, requirements documentation, and presentations. + Manages changes in project scope, identifies potential concerns, and devises contingency plans. **Qualifications:** + Associate's degree required; Bachelor's degree preferred + 3 years required, 5 years experience preferred of directing work in a large-scale project management capacity, including all aspects of process development and execution + Manage changes in project scope, identifies potential concerns, and devises contingency plans + Knowledge of business and management principles, including strategic planning, resource allocation, and production methods + Proven ability to oversee people and processes to achieve objectives + Ability to build strong business relationships with other functional areas to best support mutual objectives + Strong problem-solving skills and ability to analyze workflow and processes to provide excellent service to internal and external customers + Interpersonal, conflict management, and negotiation skills required, including strong human relations skills to supervise and develop assigned employees effectively + Adept at conducting research into project-related issues and products + Ability to learn, understand, and apply new technologies + Ability to effectively prioritize and execute tasks + Strong written and verbal communication skills \#LI-A1 At Wesco, we build, connect, power and protect the world. As a leading provider of business-to-business distribution, logistics services and supply chain solutions, we create a world that you can depend on. Our Company's greatest asset is our people. Wesco is committed to fostering a workplace where every individual is respected, valued, and empowered to succeed. We promote a culture that is grounded in teamwork and respect. With a workforce of over 20,000 people worldwide, we embrace the unique perspectives each person brings. Through comprehensive benefits (**************************************************************************** and active community engagement, we create an environment where every team member has the opportunity to thrive. Learn more about Working at Wesco here (******************************************************************* and apply online today! Founded in 1922 and headquartered in Pittsburgh, Wesco is a publicly traded (NYSE: WCC) FORTUNE 500 company. _Wesco International, Inc., including its subsidiaries and affiliates ("Wesco") provides equal employment opportunities to all employees and applicants for employment. Employment decisions are made without regard to race, religion, color, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, or other characteristics protected by law. US applicants only, we are an Equal Opportunity Employer. _ _Los Angeles Unincorporated County Candidates Only: Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act._

Pay Range: $65,000 - $85,000 Salaried, depending on experience Schedule: 8am to 5pm Mon - Fri with occasional weekends. Extended hours are required during peak season and external audits or inspections. Click here to experience a Day in the Life of our Teammates! Uncap Your Potential at America's Largest Coca-Cola Bottler - Pour Your Passion into Purpose! We're more than beverages-we're building meaningful careers and vibrant communities. Join our team where your talent meets purpose, and every teammate directly shapes our success. * Career Growth: Clear pathways to advance and develop your career * Competitive Benefits: 401(k) match + health coverage + employee stock purchase plan * Purpose-Driven: Create meaningful impact in the communities you serve * Professional Development: Dedicated training + personalized mentorship Join us - your refreshing new chapter starts here! Job Overview The Consolidated Management System Administrator (CMS Administrator) oversees the administration of the management system which enables the plant location and company overall to keep up with market demands by increasing productivity, capacity, agility, and flexibility; enhancing our work processes to support growth and maintain a sustained competitive advantage, and supports a culture of continuous improvement. The Management System applies lean principles and leads to the introduction of tools, techniques, and principles within the management structure that becomes routine and help improve quality, on-time delivery, and customer satisfaction by eliminating waste in all work processes. The CMS Administrator will assist in driving down operating costs for the production facility and serve as the primary representative during internal and external audits of the system. This individual also provides strategic guidance to Supply Chain Operations in capturing cost savings and process improvement opportunities and has the ability to lead projects through implementation. Duties & Responsibilities * Manages the administration of Consolidated Management System to assure adherence to ISO requirements and serves as the primary representative during internal and external audits of the system * Serves as a subject matter expert of the Consolidated Management System and fosters open communication and training for the management system within the facility * Supports, collaborates, and informs of management system changes and other continuous process improvements that help improve quality, on-time delivery, and customer satisfaction by eliminating waste in all work processes * Conducts routine audits and ensures compliance with the management system * Establishes planning strategies and metric standards for the management system * Provides strategic guidance to supply chain operations in capturing cost savings and process improvement opportunities Knowledge, Skills, & Abilities * Strong organizational, project management, and communication skills * Ability to influence and collaborate cross-functionally and mentor continuous improvement projects * Knowledge of International Organization for Standardization (ISO) certification requirements * Proficient with Microsoft Office applications * Strong technical aptitude Minimum Qualifications * 2 years of education beyond high school in college or technical school * Knowledge acquired through 1 to up to 3 years of work experience Preferred Qualifications * 2 years of education beyond high school in college or technical school in Management Systems, Business, or IT Work Environment Office Environment Equal Opportunity Employer - All qualified applicants will be considered for employment without regard to disability, protected veteran status, or any other characteristic protected by applicable law. Nearest Major Market: Cleveland Nearest Secondary Market: Akron

Sanitors are critical to our success here at FritoLay! Our Sanitors are responsible for cleaning and sanitizing our equipment that produces and packages the FritoLay products you already know and love. Although you will start as a Sanitor with FritoLay, we are investing in helping you grow. This job can open the door to career opportunities with us or our parent company, PepsiCo. Here is a list of some of the more frequent tasks you can expect to perform during a typical workday: * Cleaning the equipment and lines necessary for manufacturing products * Wiping down metal conveyors, as well as cleaning the machine itself * Working with strong, corrosive chemicals, hot water, and cleaning agents * Maintaining and cleaning all buildings and some outside landscaping We are open 24 hours a day, which means you may not have a typical schedule, and o r jobs are physical! As a Sanitor, you can expect to work on your feet the entirety of your shift near heavy machinery in a loud manufacturing environment. We wear productive gear (think of a HAZMAT suit) to ensure safety is maintained at all times. FritoLay manufacturing facilities are also large. While we want everyone to feel comfortable, our ability to control the temperature is limited. Indoor warehouse working conditions are impacted by seasons and the weather. Here are the minimum qualifications required for this job: * You are 18 years of age or older * You will be required to work on weekends, holidays as well as off shift * You can climb, climb, bend, reach, stoop, kneel, and stretch for extended periods with or without a reasonable accommodation * You are willing to work at heights using ladders or lifts to access areas of the plant * You are willing and able to work in an environment that has extreme temperatures, humidity, hazardous/loud equipment, and slippery surfaces Our application takes 20-25 minutes to finish on any device. Our mission is to get you in for an interview instead of jumping through hoops. Just keep an eye on your e-mail, and we will take care of the rest. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available [1] EEO is the Law & View the [2] PepsiCo EEO Policy. References Visible links 1. ********************************************************************************** 2. *******************************************************************************************

At GE Aerospace, we believe the world works better when it flies. We are a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. Working at GE Aerospace means you are bringing your unique perspective, innovative spirit, drive, and curiosity to a collaborative and diverse team. It means that if you have ideas, we will listen. You will be able to be a part of our LEAN transformation so that you can work smarter and not harder. Here, you will do work that you will be proud of. Work that really matters. As the Turbine Airfoils Delivery Leader, you will lead a team of supplier fulfillment leaders, and work with complex supply base to drive On Time Delivery for Airfoils Castings and Machined Airfoils Commodity. You will enable standard work and lean principles to drive WIP Health, Order Book Reviews, Supplier Schedule Visibility and Critical Material Management. The Turbine Airfoils Delivery Leader will interpret internal and external business challenges and recommend best practices to improve products, processes or services, as well as utilize understanding of industry trends to inform decision making process. This role will require 25% - 50% travel. **Job Description** **Roles and Responsibilities:** + Define and improve Sourcing delivery and commercial strategies at Airfoils commodity and Turbine Airfoils Value Stream level + Ownership of key performance indicators for On Time Delivery, Delinquency, Engine and Spares Volume Output, and Inventory + Commodity staff people leader with professional direct reports. Has ability to attract, retain, and grow talent + Develop expertise within delivery, fulfillment, materials planning and execution + Grow reputation within and across organizations, including Sourcing, Materials, Supply Chain Value Streams, Engineering, and Product Line organizations + Develop productive and transparent relationships with supplier leadership and understand and utilize influencers at supplier to promote shared accountability + Proactively anticipate customer needs and maintain customer perspective in decisions around design, manufacturing, quality, cost and on-time delivery + Provide professional and thought leadership + Influence processes and operations, and ensure delivery performance within own function, linking with other functions of the organization + Leverage understanding of Lean Six Sigma principles and applies them to delivery challenges + Influence delivery related source change decisions + Influence supplier strategies + Influence vendor and supplier strategies + Understand business needs with acute awareness of value stream and drives priorities, KPI's, and rhythms + Serve as escalation point of S&OP exceptions + Lead functional teams or projects with moderate resource requirements, risk, and/or complexity + Lead others to find creative solutions to address complex problems that impact the customer + Communicate complex messages and negotiate mainly internally with others to adopt a different point of view + Influence direct team and peers to take action and may negotiate with external partners, suppliers, or customers + Has major influence on business unit and has ownership/influence over commodity KPI's and financials **Required Qualifications:** + Bachelor's Degree accredited college or university (or a high school diploma / GED with a minimum of 4 years of Manufacturing Operations experience) + At least an additional 5 years of Manufacturing Operations experience **Desired Characteristics** + People Leadership and Career Growth Pipeline + Humble: respectful, receptive, agile, eager to learn + Transparent: shares critical information, speaks with candor, contributes constructively + Focused: quick learner, strategically prioritizes work, committed + Leadership ability: strong communicator, decision-maker, collaborative + Problem solver: analytical-minded, challenges existing processes, critical thinker + Ability to document, plan, communicate, and execute programs. The base pay range for this position is $157,000.00 - $200,000.00. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on February 3, 2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Warehouse and Material Handlers are critical to our success at FritoLay! Warehouse and Material Handlers are responsible for a variety of typical warehouse duties, including handling and moving material around our warehouse. Although you will start working for FritoLay, we are investing in helping you grow with this. This job can open the door to career opportunities with us or our parent company, PepsiCo. Here is a list of some of the more frequent tasks you could expect to perform during the workday: * Load and unload pallets and individual cases to and from trailers * Pick appropriate cases according to order using required technology * Safely operate a forklift after we provide you training, and you obtain certification * Load trailers via carts or stack cases on the floor of a truck trailer * Maintain general housekeeping and specific sanitation tasks as required We are open 24 hours a day, which means you may not have a typical schedule, and it's a physical job! If you have never worked in a warehouse environment before, you should understand that you will be on your feet for the entirety of your shift. Here is a list of of the minimum qualifications: * You are 18 years of age or older * You will be required to work on weekends, holidays as well as off shift * You can lift 15 to 50 pounds with or without a reasonable accommodation * You can stand and walk for extended periods with or without a reasonable accommodation * You can climb, bend, reach, stoop, kneel, and stretch for extended periods with or without a reasonable accommodation * You can repeatedly lift, carry, push, pull, and handle products with or without a reasonable accommodation * You are willing and able to work at heights using ladders or lifts to access areas of the plant) * You are willing and able to work in an environment that has extreme temperatures, humidity, hazardous/loud equipment, and slippery surfaces Our application takes 20-25 minutes to finish on any device. Our mission is to get you in for an interview instead of jumping through hoops. Just keep an eye on your e-mail, and we will take care of the rest. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law & View the PepsiCo EEO Policy.

PBNA $26. 00 / hour CLICK HERE to view our Pepsi Equipment Services (PES) Job Preview Video A skilled position responsible for installation, set up, repair and ongoing maintenance of vending, cooling and/or fountain equipment at customer accounts. Diagnoses equipment problems, uses judgment to determine how to best repair or replace. Position works independently and has frequent customer contact. May require lifting, carrying, pulling and/or moving between 20 and 45 pounds repeatedly over workday Requires kneeling, squatting, crouching, crawling and bending when making repairs, often in low places. Position may require moving vending machines weighing 800-1200 pounds. PRIMARY ACCOUNTABILITIES: Repair and perform preventative maintenance on marketing equipment Unload and reload with products as necessary Educate customers on basic equipment repair and upkeep procedures Install equipment by making holes and route lines to connect products to dispensing unit, connecting water and gas supply and finding drains for units with ice. For box syrup, build racks and connect lines Fill installed equipment and adjust to proper mixture Prioritize and schedule service and PM calls to meet customer service windows Drive to location, evaluate situation and perform necessary work (may include plumbing, electricity, refrigeration, carpentry) Collect accurate and complete equipment and customer information Remove old parts and replace with new parts Maintain parts inventory on service truck Establish positive relationship with contacts at service calls After each call, complete paperwork on job and call in paperwork every two hours Transport miscellaneous items (e. g. , compressors for repair/scrap, cardboard for recycle, etc. ) Regular, reliable, predictable attendance BASIC QUALIFICATIONS: 18 years or older 21 years or older if CDL Required Valid U. S. CDL license with Non-Excepted Interstate Status (if applicable) Note: In all California locations except Stockton, both non-excepted intrastate and non-excepted interstate status are accepted for this position. In Stockton, CA, only non-excepted interstate status is accepted. Pass DOT Physical and DOT Road-test (if required) Adhere to DOT Regulations Senior technician requires certification in refrigeration Must be able to pass refrigeration certification Type I/Type II practices (if applicable) Ability to communicate effectively in English if CDL required HELPFUL EXPERIENCE: Working with mechanical systems (e. g. , knowing mechanical concepts, troubleshooting and repairing appliances, performing basic household repair in plumbing, circuits, fuses, and electrical components, operating hand tools and power tools, etc. ) Serving customers (e. g. , resolving customer issues, ensuring appropriate communication with store managers, following up on customer requests, etc. ) Working with basic refrigeration systems (e. g. , understanding refrigeration cycle, Freon, compressors, evaporators, condensers, etc. ) Working with electrical systems (e. g. , understanding flow, wiring, outlets, etc. ) Working with plumbing (e. g. , working with drains, water supply, ice makers, shut-off valves, sweating copper, filtration systems, etc. ) Generating and setting work schedules (e. g. , determining priority of work, building work schedules, etc. ) Equipment installation (e. g. , HVAC, refrigeration, auto, copiers, fountain products, etc. ) Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901-4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law & View the PepsiCo EEO Policy. > All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law & EEO is the Law Supplement documents. View PepsiCo EEO Policy. Please view our Pay Transparency Statement

This job posting is for a position in a restaurant owned and operated by an independent franchisee and not McDonald's USA. This franchisee owns a license to use McDonald's logos and food products, for example, when running the restaurant. However, this franchisee is a separate company and a separate employer from McDonald's USA. If you are hired for the job described in this posting, the franchisee will be your employer, not McDonald's USA. Only the franchisee is responsible for employment matters at the restaurant, including hiring, firing, discipline, supervisions, staffing, and scheduling employees. McDonald's USA has no control over employment matters at the restaurant. McDonald's USA will not receive a copy of your employment application and it will have no involvement in any employment decisions, including whether you receive an interview for the job or whether you are hired. Description: McDonald's Works for Me. I'm going places. I want a satisfying career with good benefits and great opportunities for advancement. I have a lot to offer and I want to grow. The Job for Me - Get a job that inspires your best and moves you forward. Choose your hours. Pursue your education. Build your skills and be yourself. The Team for Me - Our people want to say YES - to working with energy and purpose, finding new talent, providing coaching and direction, honing their leadership skills, and helping to run a business that serves up delicious food and feel-good moments. Does this sound like you? You'll fit right in. The Company for Me - From here, you can go further than you thought possible. Reach your goals and build your future with college tuition assistance, valuable job training, and retirement benefits. Let's talk. Make your move. Requirements: The Maintenance Person assists management in achieving and maintaining outstanding interior and exterior restaurant cleanliness and maintaining restaurant equipment. As a member of the Maintenance Team, your restaurant will support you with the tools and training needed to succeed. The Maintenance Person's responsibilities may include, but are not limited to: -Filtering oil fryers daily -Maintaining outside grounds -Clean equipment, inside and outside windows, stock rooms and restrooms -Unload delivery truck 2 times a week -Take out and empty trash compactor -Change light bulbs -Clean HVAC/Exhaust units and roof of debris Additional Info: Along with competitive pay, a Maintenance Person eligible for incredible benefits including: + Flexible scheduling + Education through Archways to Opportunity including opportunities to earn a High School degree, college tuition assistance and English classes as a second language + competitive wages -Medical, dental and vision coverage if full time -Short- and Long-Term Disability, voluntary life This job posting contains some information about what it is like to work in a McDonald's restaurant, but it is not a complete job description. People who work in a McDonald's restaurant perform a number of different tasks every day, and this posting does not list all of the essential functions of this job. By applying to this position, I understand that I am applying to work at a restaurant that is owned and operated by an independent franchisee, not McDonald's USA. I understand that this franchisee is a separate company and a separate employer from McDonald's USA. Any information I provide in this application will be submitted only to the independent franchisee, who is the only company responsible for employment matters at this restaurant. I recognize that the independent franchisee alone will make all decisions concerning employment matters, including hiring, firing, discipline, supervision, staffing and scheduling. By applying for a job at a franchisee operated restaurant, I understand that the information I provide will be forwarded to the franchisee organization in order for that organization to reach out to me and process and evaluate my application. I acknowledge that McDonald's USA will not receive a copy of my employment application and will have no involvement in any employment decisions regarding me, including whether I receive an interview or whether I am hired to work for the franchisee. I understand that I need to contact the franchise organization for information about its privacy practices. Requsition ID: PDX_MC_9FD81A10-9F2E-469A-8345-F2F71549E248_6419 McDonald's provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to sex, sex stereotyping, pregnancy (including pregnancy, childbirth, and medical conditions related to pregnancy, childbirth, or breastfeeding), race, color, religion, ancestry or national origin, age, disability status, medical condition, marital status, sexual orientation, gender, gender identity, gender expression, transgender status, protected military or veteran status, citizenship status, genetic information, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Nothing in this job posting or description should be construed as an offer or guarantee of employment.

Are you ready to see your future take flight? At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You'll be part of a team that embraces your drive, your curiosity, and your unique ideas and perspectives. Most importantly, you'll share in our pride and purpose that affects the lives of millions around the world! The Supplier Quality Engineer for CMC Coatings & Raw Materials is an individual who can apply knowledge of RCCA and/or problem solving to lead supplier quality improvement of complex cross functional challenges. In this role, you will drive GE Aerospace quality standards for assigned suppliers, support customer disruption RCCA and Defect tracking, drive resolution to actions identified during problem solving, own supplier results, coordinate with customers on corrective action results from suppliers, and drive improvements utilizing supplier scorecards. In addition, you must demonstrate an in-depth understanding of key business drivers; use this understanding to accomplish their own work, as well have an in-depth understanding of how the work of their own team integrates with other teams and contributes to GE Aerospace, as a business. **Job Description** **Roles and Responsibilities** + Oversight and responsibility for supplier processes, from initial qualification, maintenance, and necessary improvements driven by Quality and Business needs. + Position includes regular supplier audits and system assessments for quality preparedness and process controls to remain adherent to GE process specifications and agency regulations. + Lead GE Aerospace supplier root cause and corrective actions to reduce systemic, product specific, and process related defects. + Requires specialized knowledge within the function. Influence the development of strategy for the area of responsibility, including control of resources and the influence of policy formulation. + Interpret internal and external business challenges and recommend best practices to improve products, processes, or services. Stays informed of industry trends that may inform work. + Uses high level of judgment to make decisions and handle complex tasks or problems in areas of operational, product management, manufacturing, technology, or engineering. Has ability to assess quality of information given and ask pertinent questions to stakeholders. Able to offer new solutions to problems outside of set parameters and can construct and provide recommendations. Uses multiple internal and some external sources outside of own function to help arrive at a decision. + May lead functional teams or projects with minimal resource requirements, risk, and/or complexity. Communicates difficult concepts and may influence others' options on specific topics. May guide others to consider a different point of view. + Uses some judgment and has the ability to propose different solutions outside of set parameters to address more complicated, day-to-day problems. Has ability to prioritize information for data analysis. Uses technical experience and analytical thinking. Uses multiple internal and limited external sources outside of own team to arrive at decisions. + **Travel fluctuates between 25% to 50% depending on the needs of the business** **Required Qualifications** + Bachelor's Degree from an accredited college or university in Engineering, Material Science or related fields (or a high school diploma/GED with a minimum of 4 years quality engineering experience) + Minimum of 3 years quality, coatings, or composites manufacturing experience **Desired Characteristics** + Demonstrated experience working with Composites, Composites Raw Materials, and/or Coatings + Demonstrated experience in manufacturing, supplier quality, statistical analysis, or customer quality + Strong communication skills. + Demonstrated ability to analyze and resolve problems. + Ability to document, plan, market, and execute programs. + Established project management skills. + Demonstrated history of problem solving, root cause and corrective action methodology, data analysis and quality experience + Demonstrated experience in assembly, composites and/or systems engineering + Demonstrated, applicable, aerospace industry experience + Humble: respectful, receptive, agile, eager to learn + Transparent: shares critical information, speaks with candor, contributes constructively + Focused: quick learner, strategically prioritizes work, committed + Leadership ability: strong communicator, decision-maker, collaborative + Problem solver: analytical-minded, challenges existing processes, critical thinker GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. The base pay range for this position is 100,000.00 - 120,000.00. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on **January 31st, 2026** . _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

This role is located in Bogota, Colombia, and various military bases and outstations. The T700 Colombia Business Leader is responsible to deliver contracted requirements, manage the onsite day-to-day operations, meet or exceed Key Performance Indicators (KPIs), and work across a matrix of internal and external stakeholders in support of the Colombia T700 Depot. The Business Leader demonstrates accountability for functional, business, and broad company objectives. In this role, you will develop standard work and develop processes that meet both customer and business needs. This involves collaborating across customer and GE organizations to manage complex issues, participate in long-term planning, lead contract renewals, and help develop additional opportunities to contribute to the overall business strategy in Colombia. This role is critical to the US Government for our customer to meet their readiness goals. The Colombia T700 Depot Business Leader is the primary point of contact for the customer and owns the customer's experience regarding all T700 contractual interactions with GE Aerospace. Includes critical Project Management/ Planning/ Coordinating activities typically in the context of a production or services project to fulfill a customer order or need according to financial/commercial parameters and ensuring customer satisfaction. Impacts the team's ability to achieve service, quality and timeliness of objectives. The role is subject to operating policy objectives. There is moderate autonomy within the role. High levels of operational judgment are required to achieve outcomes required. The T700 Depot Leader will coordinate closely with SMX, Airtech, Colombia Ministry of Defense, Army, Air Force, and Police, training and equipment manager, field service representative, production support engineering, external machine and test cell contractors, and the Rotorcraft and Turboprop Project Management staff to ensure the T700 depot MRO product line is completed on schedule, on cost, and to the continuous satisfaction of the customer. **Job Description** **Job Title** **Sr Services Staff Manager 2 - O&M Station Management (Global Mobility Assignment - Bogota, Colombia)** **Company Intro / About GE Aerospace** At GE Aerospace, we invent the future of flight, lift people up, and bring them home safely. Building on more than a century of innovation, we design, manufacture, and service advanced jet and turboprop engines as well as integrated systems for commercial, military, business, and general aviation aircraft. Our teams are united by a shared purpose: to define flight for today, tomorrow, and the future. We do this by focusing relentlessly on safety, quality, delivery, and cost, and by partnering closely with our customers around the world. **Site, Business, OR Functional Area Overview** This role is based in **Bogota, Colombia** as a **Global Mobility employee assignment** supporting our **Services** organization. The position is focused on **T700/CT7 Maintenance, Repair, and Overhaul (MRO)** operations and O&M station management in support of long-term customer agreements. You will work closely with GE Aerospace regional teams, depot and field maintenance organizations, and customer stakeholders to ensure safe, high-quality, and cost-effective sustainment of the assigned engine fleets. **Role Overview** The **Sr Services Staff Manager 2 - O&M Station Management** is responsible for operating and maintaining the plant on behalf of the customer, within the boundaries of the O&M contract or Long Term Service Agreement (LTSA). In this role, you will: + Lead a small to medium team of senior professionals and other staff, providing on-site leadership for day-to-day operations + Provide sustainment depot qualification program leadership for assigned fleets + Manage engine and component MRO activities to meet contractual requirements, customer expectations, and GE business objectives This role requires **specialized experience with T700/CT7 MRO** and the ability to influence strategy, coordinate across multiple GE functions, and represent GE in front of the customer. **Key Responsibilities** In this role, you will: + **Lead plant/operations management** to operate and maintain the plant on behalf of the customer in line with the O&M contract or LTSA + **Manage a team** of senior professionals and others, providing direction, coaching, and performance management to meet contract deliverables and business goals + **Apply specialized T700/CT7 MRO knowledge** to guide operational decisions, maintenance strategies, and sustainment plans + **Influence area strategy and policy** , including resource allocation and input to policy formulation for your area of responsibility You will also: + **Provide sustainment depot qualification program leadership** for assigned fleets and ensure customer satisfaction + **Represent GE** in business and contract-related discussions with the customer + **Provide on-site leadership** for day-to-day operations to meet contract deliverables safely and efficiently + **Collaborate** with GE, contractors, and customer teams to develop and execute mobilization plans (teams, office spaces, digital fleet management tools, training, and business infrastructure) to begin executing the contract + **Develop and manage reporting** to clearly communicate mobilization progress, engine status, inventory status, key performance indicators (KPIs), and status of contract deliverables + **Coordinate and support program management and technical reviews** with the customer + **Coordinate across GE organizations** (e.g., Contract Performance Management, Field Service, Fleet Support Engineering, Repair Engineering, Material Integrator, MRO facilities, and component MROs) to achieve customer satisfaction, readiness goals, and business metrics + **Manage engine and component MRO activities** , including repair source scheduling, workload balancing, and logistics to meet contractual requirements and optimize repair costs + **Achieve contract productivity targets** aligned with safety, quality, delivery, and cost expectations + **Generate and manage forecasts** , including: + Engine and module shop visit forecasts + Field and depot-level part forecasts + Flowing down forecasts to repair sources and spares organizations + Determining minimum inventory levels and order points to replenish customer stores In addition, you will: + **Interpret internal and external business challenges** and recommend best practices to improve products, processes, or services + **Stay informed of industry trends** that may impact work scope and customer expectations + **Use sound judgment** to make decisions, handle complex issues, and provide recommendations based on multiple internal and external inputs + **Communicate complex concepts** and influence stakeholders, sometimes guiding others to consider different points of view **Required Qualifications** + **Education** : Bachelor's degree from an accredited university or college + Or a high school diploma / GED with at least 6 years of relevant experience + **Language** : Fluent Spanish (read, write, and spoken) + **Experience** : + Relevant experience in services, operations, station management, or maintenance/sustainment (preferably in aerospace or related industries) + Demonstrated experience managing teams and delivering against contractual commitments **Desired Characteristics** + **Technical and leadership background** : + BS in Mechanical or Aerospace Engineering + Extensive leadership experience in a **lean operating environment** (e.g., Flight Deck or similar) + Familiarity with or experience in managing **long-term customer service agreements** + Familiarity with or experience managing **military aircraft maintenance/sustainment** + **Project and program leadership** : + Demonstrated ability to lead programs and projects from planning through execution + Ability to document, plan, market, and execute programs + Established project management skills + **Interpersonal and communication skills** : + Strong oral and written communication skills + Strong interpersonal and leadership skills + Demonstrated ability to analyze and resolve problems and to influence stakeholders **Additional Information** The base pay range for this position is $ 135,000.00 - 180,000.00 USD Annual The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 20th, 2026 GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage, access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits includ tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time -off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or prog rams (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. © 2023 GE Aerospace and/or its affiliates. All rights reserved. Attorney-Client Privileged This role requires use of technical data subject to U.S. Government contract restrictions and is **only open to U.S. citizens** . GE will require proof of U.S. citizenship prior to employment. **Closing** At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. For this specific position, due to U.S. Government contract restrictions and access requirements, **only U.S. citizens are eligible** , and proof of status will be required prior to employment. **Additional Information** **Relocation Assistance Provided:** Yes \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

The GEnx Assembly Fulfillment Leader will demonstrate accountability for function, business, and strategic objectives. In the role, you will coordinate and expedite the flow of materials (from suppliers and also within departments) according to production schedules. You will plan and schedule material/production needs via collaboration with manufacturing programs and shops as part of the larger integrated product team and communicate across the supply chain to ensure alignment on material needs/constraints. This role is open to remote consideration in EST and CST states. **Job Description** **Roles and Responsibilities** + Engage with supply chain and manufacturing programs to compliantly drive critical part delivery and allocation calls. + Work collaboratively with cross-functional teams to ensure short term execution as well as longer term planning to ensure capacity to meet business need in future quarters + Manage material processes and systems to provide accurate signals, includes data cleanliness requirements (removal of defects/inaccuracies). + Working with the warehouse for incoming hardware to ensure that part tracking and allocation is accurate in systems. + Understand system processing at the fulfillment horizon to align to program needs. + Reviews waterfalls and open orders to manage shortages while building strong relationships with internal supplier management team. + Communicates program needs clearly and concisely to drive results at internal and external source locations + Work with warehouse teams (Erlanger or CPLC) to ensure material flow and kitting to align to build plan. + Ensure operational alignment with production plan and KPIs. + Understanding inventory transactions and their impact on the MRD signal to optimize inventory and process improvements. + Develop in-depth knowledge of a technical discipline. Use prior experience and acquired technical expertise to execute policy/strategy. + Collaborates with internal sourcing management teams and assembly teams to mitigate work-stops while reducing delinquency to achieve 100% OTD + In-depth understanding of key business drivers; uses this understanding to accomplish own work. In-depth understanding of how work of own team integrates with other teams and contributes to the area. + Uses judgment and has ability to propose different solutions outside of set parameters. Uses prior experience and on-the-job training to solve tasks. Has access to technical skills and analytic thinking required to solve problems. Able to utilize multiple sources outside of own team to arrive at decisions. + Leads and owns several process and standard work improvement projects each year. + Involved in problem solving and effectively escalates issues when appropriate. **Required Qualifications** + Bachelor's degree from an accredited university or college (or a high school diploma / GED with at least 4 years of experience in material planning, fulfillment, supplier delivery, or manufacturing operations) + a minimum of 3 years of material planning, fulfillment, supplier delivery, manufacturing operations, or relevant work experience or GE Leadership Program Graduate in lieu of experience **Desired Characteristics** + Experience working in or directly with manufacturing facilities + Aptitude in GEA materials systems: CAS, Oracle, ATLAS, AOA, AMT, etc. + Strong oral and written communication - must be able to deliver clear and concise messages to drive outcomes. + Demonstrated ability to analyze and resolve problems. + Ability to document, plan, and execute program needs. + Proven analytical and organizational abilities + Ability to effectively manage competing priorities and resolve challenges simultaneously + Lean/Continuous Improvement experience/mindset + Ability to hold others accountable and lead via influence + Humble: respectful, receptive, agile, eager to learn + Transparent: shares critical information, speaks with candor, contributes constructively + Focused: quick learner, strategically prioritizes work, committed + Leadership ability: strong communicator, decision-maker, collaborative + Problem solver: analytical-minded, challenges existing processes, critical thinker + Knowledgeable and obtains an understanding of Flight Deck principles. + Desired: Someone with APICS CPIM Certification + Production control and materials control manufacturing or operation experience The salary range for this position is $101,000 - $135,000 USD Annual. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. This posting is expected to close on February 10, 2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

GE Aerospace is seeking a Sr Principal Solutions Architect to join our Finance Digital Technology (DT) team. In this role, you will lead efforts to optimize our Oracle EPM on-premise application footprint and shape the future of our Enterprise Performance Management (EPM) solutions. You will provide strategic input to design a fit-for-purpose EPM system, including evaluating SaaS vendors, while ensuring seamless integration across EPM, ERP (SAP, Oracle), and subledger systems. We're looking for a candidate with expertise in EPM systems and architecture, experience with ERP platforms, and the ability to lead complex software solutions across multiple domains. At GE Aerospace, you'll work on cutting-edge technology, collaborate with talented professionals, and contribute to a global leader in aerospace innovation. Apply today to help shape the future of finance technology! **Job Description** **Roles and Responsibilities:** + Design and develop end-to-end EPM solutions according to business requirements. + Design, configure, and implement robust EPM solutions for Master Data Management, Consolidations (GAAP, Stat and Tax), FP&A and Reporting. + Develop, implement and maintain EPM modules and business process flows. + Manage end-to-end system development lifecycle including testing, deployment, and documentation. + Provide technical support and troubleshooting to resolve system issues, ensuring optimal system performance and stability. Including coordinating resolution through both internal and external technical support providers. + Identify required software quality standards and delivery models. + Drive continuous improvement initiatives to optimize system performance and efficiency. Including spearheading efforts to analyze existing processes to identify risks and automation opportunities. + Collaborate with developers and operational support across a distributed, global landscape. + Clearly communicates by delivering audience-appropriate information and insights spanning. + Readily partner with stakeholders to gather requirements, perform gap analysis, create functional specifications, documentation of technical solutions and authoring test scripts as needed. + Keep up to date with industry trends and chosen software providers short- and long-term strategy ensuring the EPM landscape is aligned with evolving needs and innovative technology offerings. **Minimum Qualifications:** + Bachelor's degree from accredited university or college with minimum of 10 years of professional experience OR associate's degree with minimum of 13 years of professional experience OR High School Diploma with minimum of 15 years of professional experience. + 10+ years of hands-on experience in EPM products, business processes, and data integration tools in both implementation and support. + **Note:** Military experience is equivalent to professional experience Eligibility Requirement: + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job. **Must Haves:** + Strong knowledge of EPM Cloud Products and related modules, data integration + Sound experience with Record to Report Financial processes within Systems, from SubLedgers to Ledgers to consolidations, planning and reporting. + In-depth understanding of principles related to finance accounting and planning, including corporate month end close - consolidation, translation, elimination, and financial reporting activities as well as planning, forecasting and management reporting processes and master data management + Proven expertise of system architecture, security environments, and interface technologies + Demonstrated architecture experience as part of complex EPM implementation projects - navigating dependencies of multiple initiatives that will impact the application landscape. **Desired Characteristics:** + Change Agent - Identifies opportunities for necessary changes and pursues/leads them when appropriate. + Evaluates progress and involves peers and team members in analyzing strengths and weaknesses in performance. + Works with executive stakeholders to embrace the implications of change. Recommends changes that impact strategic business direction. + Leads the planning and implementation of change programs that impact critical processes. + Subdivides major deliverables into smaller, manageable components and re-appropriates existing solutions to new requirements and situations. + Innovates and integrates new processes and/or technology to add value to GE. Identifies how the cost of change weighs against the benefits and advises accordingly. + Proactively learns new solutions and processes to address problems. + Collaboration - Establishes a baseline of objectivity for team. Drives the team toward the organizational objectives. + Builds team structure to leverage the strengths of individuals in carrying breadth or depth in capabilities to form a cohesive whole. + Introduces company-wide tools for improving collaboration, productivity and building strong communities. + Participates in company and industry conferences/ boards. Introduces new methodologies for working across the company. + Identifies and forecasts evolving needs of the team/company. + Comfort in Ambiguity - Acts and decides appropriately when all available information may not be possible to obtain. + Makes decisions and course corrects as a result of the feedback from those decisions. Presents results with alternatives and scenarios. + Creates new tools and methods for gaining data and driving clarity. + Supports the team to drive through ambiguity. + Communication - Creates stories and utilizes two-way communications. + Communicates functional strategy and roadmap with detail for teams to utilize. + Describes functional area information to leaders. Coaches' others on presentation skills. + Collaborates with leadership on mediums and messages that drive the intended direction of the organization with measurable results. + Determines the need for theoretical explanations vs. a business actionable answer in a presentation. + Consulting - Leads partnership with clients to define/determine the scope of engagement. + Identifies business and technology trends. Advises senior leaders on planning opportunities and implementation considerations for strategic investments. + Uses formal techniques of facilitation and analysis to assist leadership in criterion based decision-making and strategic planning. + Curiosity/Creativity - Removes barriers and constraints that block the creativity of self & others (e.g., creates open idea forums, solicits new processes, etc.). + Inspires continuous learning and stimulation of thought. Champions progression of ideas to solutions through simplicity and speed. + Decision Making & Risk Management - Participates in the creation of company-wide risk management strategies. + Works with senior business leaders to communicate risks, impact, and mitigation plans for the business. Applies best practices to take calculated risks. + Takes risks and learns from failures. Encourages ideas from others that may include risk but may provide great gains for the organization. + Influence - Influences through others, including by use of experts or other third parties. + Builds direct and ""behind the scenes"" support for ideas. + Foresees downstream consequences and tailors' communication strategy to support a positive outcome. + Problem Solving - Predicts problems and proactively converts them into business opportunities or minimizes business risk for the company. + Builds, coaches, and develops a team & culture of proactive problem solving. Removes roadblocks. Knows when & where to place bets, when to reuse and when to persevere. **Note:** The base pay range for this position is $180,000 - $275,000. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 30th, 2026. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunities Employer. (****************************************************************************************** Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE will only employ those who are legally authorized to work in the United States for this opening. **Relocation Assistance Provided:** No] \[" EDW#e **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Do you have a passion for leveraging data, analytics, and AI to drive meaningful change? At GE Aerospace, we are transforming supply chain processes to address one of our most critical business challenges: delivery. As a Staff Enterprise Application Engineer specializing in Palantir, you will utilize your expertise in Palantir Foundry and AWS cloud technologies to design, deploy, and tailor solutions for complex aerospace challenges. In this role, you will build and maintain Foundry pipelines, modular applications, and workflows, while working closely with stakeholders to create cutting-edge solutions using ontology, advanced analytics, and AI. **** **Roles and Responsibilities** + Architect and design sound/supportable technical solutions to complex business requirements + Develop and maintain Foundry pipelines using Pipeline Builder to ingest, transform, and integrate data. + Build modular applications and workflows leveraging Python, and Foundry AIP. + Collaborate with data engineers, analysts, and stakeholders to refine data models and ontology mapping. + Assist in Foundry workshops to guide stakeholders through platform capabilities. + Support testing, debugging, and performance tuning of Foundry applications. + Work with aerospace data to identify patterns, trends, and insights using Palantir Foundry and AWS analytical tools. + Develop custom applications and workflows within Foundry and AWS to address specific challenges. + Ensure data integrity and compliance with aerospace industry standards. + Apply lean methodologies to identify opportunities for process improvement. + Share feedback with Palantir and AWS product teams to enhance tools and workflows. + Provide technical coaching and direction to more junior teammates. **Technical Qualifications** + Strong experience in Python, PySpark, and front-end frameworks like React, Angular, or Vue.js. + Experience with Pipeline Builder, AIP, and Foundry's application development ecosystem. + Proficiency in AWS cloud services such as EC2, S3, Lambda, RDS, and CloudFormation. + Experience with Git-based code repositories and CI/CD workflows. **Minimum Qualifications** + Bachelor's degree from accredited university or college with minimum of 4 years of professional experience OR associate's degree with minimum of 7 years of professional experience OR High School Diploma with minimum of 9 years of professional experience + Minimum 3 years of professional experience in Computer Science or "STEM" Majors (Science, Technology, Engineering and Math) + **Note:** Military experience is equivalent to professional experience The base pay range for this position is $110,700- $184,600. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on October 31, 2025. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs ( _i.e_ ., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. **Eligibility Requirement:** + Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job. **Desired Characteristics** + Ability to operate in an ambiguous environment as we establish this transformation program and define roles & responsibilities. + Demonstrated ability to quickly understand new concepts and analyze system deficiencies + Passionate about security and the quality of the applications they support + Organized, thorough, and detail oriented + Collaborates well with others to solve problems and actively incorporates input from various sources + Eager to learn, shares ideas, encourages and accepts feedback well + Strong analytical skills - strong problem-solving skills, communicates in a clear and succinct manner and effectively evaluates information / data to make decisions; anticipates obstacles and develops plans to resolve + Demonstrated customer focus - evaluates decisions through the eyes of the customer; builds strong customer relationships and creates processes from the customer's viewpoint + Experience working with an offshore development team + High level of energy and enthusiasm, with the ability to thrive in a dynamic, fast-paced setting + Comfortable with empowering colleagues and inspiring others to be their best **Note:** To comply with US immigration and other legal requirements, it is necessary to specify the minimum number of years' experience required for any role based within the USA. For roles outside of the USA, to ensure compliance with applicable legislation, the JDs should focus on the substantive level of experience required for the role and a minimum number of years should NOT be used. This Job Description is intended to provide a high-level guide to the role. However, it is not intended to amend or otherwise restrict/expand the duties required from each individual employee as set out in their respective employment contract and/or as otherwise agreed between an employee and their manager. **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

We have the maps, the tools, and the vision-now we are looking for the Training Coach who will walk the path alongside our team. If you are a natural "people person" who finds satisfaction in seeing a project through to the finish line, this is your calling. In this role, you aren't here to manage or lecture; you are here to be the ultimate partner in growth. You are the steady pulse that keeps our training initiatives alive, active, and moving forward. The Role: Your Daily Impact As our Training Coach, your mission is to ensure that no great plan gets left on a shelf. You will be the vital human connection that keeps our team engaged with their professional development. * The Ultimate Accountability Partner: You'll check in with team members not as a boss, but as a peer and partner, helping them find the time and focus to stick to their established training paths. * Keeping the Momentum: When life gets busy, you'll be the one to offer a gentle nudge and a clear reminder of the goals they've set for themselves. * Celebrating the Small Wins: You'll track progress across the finish line, ensuring every module completed is recognized and every milestone is met with enthusiasm. * Organizing the Flow: You'll keep the training calendar humming, making sure everyone knows where they are in their plan and what exciting step comes next. Who You Are * A Master Communicator: You know how to check in without being overbearing. You bring a positive, encouraging energy to every conversation. * The Organized Friend: You're the person who always has the plan, keeps the dates straight, and loves a clear "to-do" list. * A True Believer in Others: You don't need to lead the team-you just want to help the team win. You get a thrill out of watching your colleagues gain new skills and cross the finish line. * Consistency-Minded: You understand that great things are achieved through small, daily actions, and you have the patience to see those actions through. Why You'll Love This Role This is a position for someone who loves the social and organizational side of work without the pressure of management. You get to be the supportive "wingman" for our team's success, building strong relationships and seeing the tangible results of your encouragement every single day. Ready to Join the Team? If you are ready to be the partner our team needs to reach their goals, we can't wait to hear from you. up to $16.00/ Hour Requirements: * Must be 18 years old * Valid driver license * Reliable means of transportation * Open availability (scheduled for needs of the business) Email Resume To: ******************

Click here to experience a Day in the Life of our Teammates! Uncap Your Potential at America's Largest Coca-Cola Bottler - Pour Your Passion into Purpose! We're more than beverages-we're building meaningful careers and vibrant communities. Join our team where your talent meets purpose, and every teammate directly shapes our success. * Competitive Benefits: Health coverage + paid time off * Purpose-Driven: Create meaningful impact in the communities you serve * Training & Support: Ongoing learning opportunities Join us - your refreshing new chapter starts here! Job Overview The Mechanic Manufacturing II is responsible for repairing and maintaining all assets in the production facility. This position responds promptly to equipment breakdowns and repairs the machinery in a timely manner and performs planned and unscheduled work, as necessary. The Mechanic Manufacturing II also maintains a safe and clean working environment by complying with procedures, rules, and regulations; conserves maintenance resources by using equipment and supplies as needed to accomplish job results; maintains equipment, parts, and supplies inventories by checking stock to determine inventory level, anticipating needed equipment, parts, and supplies. This position is also responsible for making design improvements and process changes to improve overall production efficiencies. Duties & Responsibilities * Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions * Locates sources of problems by observing mechanical devices in operation; listening for problems, using precision measuring, and testing instruments * Monitors and maintains multiple pieces of equipment by correctly completing assigned PMs, performing corrective maintenance work orders, filling out all paperwork, work orders, parts usage, and order forms * Controls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance, and assisting production as needed to keep the line running at top efficiency * Performs other duties as assigned Knowledge, Skills, & Abilities * Read and follow SOPs or instructions * Computer skills * Ability to multi-task * Competency in monitoring and adjusting equipment speeds, temperatures, and liquid levels * Identify and troubleshoot complex process issues * Make mechanical, electrical, pneumatic, and hydraulic adjustments * Preferred ability to read blueprints, electrical prints, and machine schematics * Ability to comprehend complex processing equipment * Individual needs to possess the initiative to further technical expertise * Experience with Programmable Logic Controls (PLCs) required Minimum Qualifications * 2 years of education beyond high school in college or technical school * Knowledge acquired through 3 to up to 5 years of work experience * Advanced knowledge with preferred 2 plus years experience in plant maintenance and high-speed production equipment, and, or certification of technical schooling in this area Preferred Qualifications * Advanced knowledge with preferred 2 plus years experience in plant maintenance and high-speed production equipment, and, or certification of technical schooling in this area Work Environment Noisy, wet, and extreme temperature environment Equal Opportunity Employer - All qualified applicants will be considered for employment without regard to disability, protected veteran status, or any other characteristic protected by applicable law. Nearest Major Market: Cleveland Nearest Secondary Market: Akron

McDonald's and Tomtreyco care about our employees and that's why we provide them with an opportunity to learn, grow, and succeed every day. There is a reason more than 80% of employees are proud to work at McDonald's and would recommend working at one of our restaurants. A Team Member at Tomtreyco McDonald's is more than just a paycheck - it's a chance to gain life skills and grow as an individual. And for anyone willing to take advantage of these opportunities...we're committed to becoming America's Best First Job! See a day in the life of a Team Member at McDonald's ************************************************************ Requirements: We believe in letting you do you. If you're looking for a full time or part-time job that supports your full-time ambition, you've come to the right place. Team member opportunities are available practically anytime: breakfast, lunch, late nights, weekends - whatever. All you'll need is an outstanding attitude, willingness to learn and grow and the capability to excel in a fast-paced, team environment. We'll teach you the rest. What does a member of our team get to do? - Connect with customers to ensure they have a positive experience - Help customers order their favorite McDonald's meals - Prepare all of McDonald's World-Famous food - Partner with other Crew and Managers to meet daily goals and have fun - Keep the restaurant looking fantastic Benefits: Along with competitive pay, a Team Member at a Tomtreyco McDonald's restaurant is eligible for some great benefits including: - Paid vacation after 90 days - Up to $2,500 in tuition assistance each year - Free meals when you work - 50% off meals any other time - Vision, Dental, Short-Term Disability and Life insurance Additional Info: This job posting is for a position in a restaurant owned and operated by an independent franchisee and not McDonald's USA. This franchisee owns a license to use McDonald's logos and food products, for example, when running the restaurant. However, this franchisee is a separate company and a separate employer from McDonald's USA. If you are hired for the job described in this posting, the franchisee will be your employer, not McDonald's USA. Only the franchisee is responsible for employment matters at the restaurant, including hiring, firing, discipline, supervisions, staffing, and scheduling employees. McDonald's USA has no control over employment matters at the restaurant. McDonald's USA will not receive a copy of your employment application and it will have no involvement in any employment decisions, including whether you receive an interview for the job or whether you are hired. This job posting contains some information about what it is like to work in a McDonald's restaurant, but it is not a complete job description. People who work in a McDonald's restaurant perform a number of different tasks every day, and this posting does not list all of the essential functions of this job. By applying to this position, I understand that I am applying to work at a restaurant that is owned and operated by an independent franchisee, not McDonald's USA. I understand that this franchisee is a separate company and a separate employer from McDonald's USA. Any information I provide in this application will be submitted only to the independent franchisee, who is the only company responsible for employment matters at this restaurant. I recognize that the independent franchisee alone will make all decisions concerning employment matters, including hiring, firing, discipline, supervision, staffing and scheduling. By applying for a job at a franchisee operated restaurant, I understand that the information I provide will be forwarded to the franchisee organization in order for that organization to reach out to me and process and evaluate my application. I acknowledge that McDonald's USA will not receive a copy of my employment application and will have no involvement in any employment decisions regarding me, including whether I receive an interview or whether I am hired to work for the franchisee. I understand that I need to contact the franchise organization for information about its privacy practices. Requsition ID: PDX_MC_A229630B-0BE8-43E8-BF7D-AEAD626339C3_12402 McDonald's provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to sex, sex stereotyping, pregnancy (including pregnancy, childbirth, and medical conditions related to pregnancy, childbirth, or breastfeeding), race, color, religion, ancestry or national origin, age, disability status, medical condition, marital status, sexual orientation, gender, gender identity, gender expression, transgender status, protected military or veteran status, citizenship status, genetic information, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Nothing in this job posting or description should be construed as an offer or guarantee of employment.