Process Technician jobs at PharmaCann

The Registered Radiologic Technologist is a professional care giver who assumes responsibility of patients for a designated time frame and to provide care, specifically in the Heart & Vascular Institute. The patient population consists of those requiring an invasive cardiology or invasive radiology study. The Registered Radiologic Technologist will assist the physician in all procedures and provide a valuable service to the patient and the team. Qualifications Certifications: Basic Life Support (BLS) within 30 days - American Heart Association (AHA) American Heart Association (AHA); Advanced Cardiac Life Support (ACLS) within 1 year - American Heart Association (AHA) American Heart Association (AHA); Registered in Radiography (R) - American Registry of Radiologic Technologists (ARRT) American Registry of Radiologic Technologists (ARRT); Licensed Radiologic Technologist - Radiography - Illinois Emergency Management Agency (IEMA) Illinois Emergency Management Agency (IEMA), Education: Associate's Degree; Certificate of Completion, Work Experience: Responsibilities Administers contrast material (when applicable), according to physician's request, by means of existing vascular access point; recognizes and responds to hypersensitivity or allergic reactions. All functions and duties will be under the direct supervision of a physicist or dosimetrist. Assists with inventory/supplies. Checks for correct patient and chart identification, diagnosis, and treatment position. Compiles pertinent clinical information pertaining to lab, pathology, etc. Assists in instruction of new staff as necessary. Documents accurately and completely according to established policies and procedures. Explains procedure to patient and provides for patient care- including comfort, support, safety, and confidentiality. Performs all essential functions of the Radiologic Technologist. Performs on call duties and/or work variable shifts as assigned to meet department needs. Able to work around and maintain a sterile field during procedures. Administers and with holds contrast and treatment as appropriate. Assess patients for allergies. Can pull supplies for procedures. Takes call in within 6 months. Cardiac Cath Lab work including left heart cath, with/without coronary stenting, right heart cath, pericardiocentesis, and vascular access under sterile procedure. Structural Heart Procedures to include TAVR, Watchman, Mitraclip, Triclip, ASD/PFO and CardioMEMs. Hybrid Peripheral Vascular work in coordination with vascular surgery to include EVAR, TCAR, and TEVAR. Adjunctive tools to complete the above procedures including but not limited to ICUS, FFR/iFR, Lithotripsy, Laser, Rota, Impella, IABP, OCT, and CTO. About Us Find it here. Discover the job, the career, the purpose you were meant for. The supportive and inclusive team where you can thrive. The place where growth meets balance - and opportunities meet flexibility. Find it all at Carle Health. Based in Urbana, IL, Carle Health is a healthcare system with nearly 16,600 team members in its eight hospitals, physician groups and a variety of healthcare businesses. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet designations, the nation's highest honor for nursing care. The system includes Methodist College and Carle Illinois College of Medicine, the world's first engineering-based medical school, and Health Alliance™. We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. | For more information: *************************. Compensation and Benefits The compensation range for this position is $28.94per hour - $49.78per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate's experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit careers.carlehealth.org/benefits.

Angio/Interventionalist Technologist at Intermountain Health are committed to providing patient centered care while demonstrating our values of Integrity, Trust, Excellence, Accountability, and Mutual Respect. If you are interested in contributing to our mission of helping people live the healthiest lives possible- come join our team! What does it mean to be a caregiver with Intermountain? Check out this video and learn more and discover the “Power of We.” To learn more about this exciting opportunity, please Click Here to schedule a time to further discuss this opportunity. Posting Specifics: Benefits Eligible: Yes - Link to Benefit Details Shift Details: Variable Hours: Part-Time (20 hours) Additional Details: Shift differentials given for weekends, evenings, and nights Who We Are: Lutheran Hospital is a community-based, acute-care hospital in Wheat Ridge, Colorado. It includes Lutheran Hospice Center and Lutheran Spine Center at Denver West. Lutheran Hospital began in 1905 as the Evangelical Lutheran Sanitarium, a tent colony for tuberculosis patients. As medical advances diminished the demand for tuberculosis treatment, community leaders decided the center should meet a new need. Community-based Lutheran Hospital, a not-for-profit, general medical facility located on a 100-acre campus, opened its doors in 1961. Our new Lutheran Hospital campus at Clear Crossing in Wheat Ridge opened its doors on August 3rd. Construction on the six-story replacement hospital started in 2021 and provides a state-of-the-art care site in the West Denver suburbs. Essential Functions: Maintains up-to-date licensure and certifications required for position. Provides procedural assistance as a circulating tech, scrub tech, or monitoring tech, according to Angio lab policies and procedures and Scope of Practice documents. Ensures proper patient identification, order verification, and prepares the patient for the exam. Adheres to radiation safety guidelines and maintains a safe working environment for patients and staff. Develops specific knowledge about invasive, diagnostic, and interventional supplies, appropriate indications and applications, and proper use and deployment techniques. Follows appropriate protocol for medical necessity, coding and charging, obtaining necessary consents, maintaining applicable QC (Quality Control) programs, and reporting any equipment failures or problems. Provides appropriate patient education, ensures patient comfort, and address patient and/or family concerns. Keeps accurate records of patient information, procedures performed, and any adverse reactions or incidents. Coordinates patient care and communicates pertinent information to other patient care providers following procedure. At the end of the procedure, suture the sheath in place, or remove the sheath and apply pressure to obtain hemostasis. Performs advanced interventional procedures including ablation procedures, stents, thrombectomy, embolization. Orient new angio staff, provide teaching, coaching, mentoring and provide direct supervision as a defined preceptor. Proctors other staff including specialized equipment and procedural techniques. Qualifications: Work Experience 1-2 years Angio/Interventional experience preferred, or 1-2 years vascular or interventional experience. Licenses and Certifications Vascular/Interventional radiography certification Preferred Relevant State Licensure and/or certifications Upon Hire Required ARRT - American Registry Upon Hire Required BCLS - Basic Life Support Upon Hire Required ACLS - within 120 Days Preferred PALS - Pediatric Advanced within 120 Days Required for pediatric hospitals Now that you know more about being an Angio/Interventionalist Technologist on our team, we hope you'll join us. At Intermountain Health, you'll reaffirm every day how much you love this work, and why you were called to it in the first place. Physical Requirements: Location: Intermountain Health Lutheran Hospital Work City: Wheat Ridge Work State: Colorado Scheduled Weekly Hours: 20 The hourly range for this position is listed below. Actual hourly rate dependent upon experience. $35.25 - $54.39 We care about your well-being - mind, body, and spirit - which is why we provide our caregivers a generous benefits package that covers a wide range of programs to foster a sustainable culture of wellness that encompasses living healthy, happy, secure, connected, and engaged. Learn more about our comprehensive benefits package here. Intermountain Health is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. At Intermountain Health, we use the artificial intelligence ("AI") platform, HiredScore to improve your job application experience. HiredScore helps match your skills and experiences to the best jobs for you. While HiredScore assists in reviewing applications, all final decisions are made by Intermountain personnel to ensure fairness. We protect your privacy and follow strict data protection rules. Your information is safe and used only for recruitment. Thank you for considering a career with us and experiencing our AI-enhanced recruitment process. All positions subject to close without notice.

Under the direction of a Registered Nurse (RN), the Health Care Technician (HCT) functions as a support to the licensed nursing staff and performs activities related to the personal care and hygiene needs of an assigned patient group. Facilitates communication with other departments, visitors, patients, medical staff and employees. Serves as a public relations liaison for the unit. Works under the direct supervision of the nursing manager. Qualifications Certifications: Basic Life Support (BLS) within 30 days - American Heart Association (AHA) Education: H.S. Diploma/GED (Required) Work Experience: At least one semester of nursing clinical experience; Worked as CNA within past 24 months; Successful completion of Carle's HCT In Training Program; Relevant medical military training; Completion of CNA coursework within past 24 months; Certified Nursing Assistant (CNA) Responsibilities Assists with the maintenance of unit supplies to ensure the smooth function of the unit, including stocking nurse servers, cleaning instruments and equipment, ordering supplies, and making up charts. Collects data on assigned patients as directed by Registered Nurse (RN) and ensures accurate documentation. Demonstrates competency in selected psychomotor skills as outlined in the skills checklist including: measurement of vital signs, blood glucose monitoring, and measuring and recording intake and output. Performs or assists patients with the activities of daily living. Prepares patients for transportation and/or transport. Perform delegated tasks such as: obtaining vital signs, glucose monitoring, hygiene care, ambulation, repositioning patients, sending lab samples. Perform purposeful hourly rounding on assigned patients while marking initials on white board upon exiting patient room. Provide emotional support to patients and family members Document patient care delivery per unit expectations/pass chart audit with no more than 2 deficits Assist with bone marrow aspirations as needed with physicians. Complete delegated tasks in a timely manner and report any abnormal findings to the RN as soon as possible. About Us Find it here. Discover the job, the career, the purpose you were meant for. The supportive and inclusive team where you can thrive. The place where growth meets balance - and opportunities meet flexibility. Find it all at Carle Health. Based in Urbana, IL, Carle Health is a healthcare system with nearly 16,600 team members in its eight hospitals, physician groups and a variety of healthcare businesses. Carle BroMenn Medical Center, Carle Foundation Hospital, Carle Health Methodist Hospital, Carle Health Proctor Hospital, Carle Health Pekin Hospital, and Carle Hoopeston Regional Health Center hold Magnet designations, the nation's highest honor for nursing care. The system includes Methodist College and Carle Illinois College of Medicine, the world's first engineering-based medical school, and Health Alliance™. We offer opportunities in several communities throughout central Illinois with potential for growth and life-long careers at Carle Health. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Carle Health participates in E-Verify and may provide the Social Security Administration and, if necessary, the Department of Homeland Security with information from each new employee's Form I-9 to confirm work authorization. | For more information: *************************. Compensation and Benefits The compensation range for this position is $17.89per hour - $28.98per hour. This represents a good faith minimum and maximum range for the role at the time of posting by Carle Health. The actual compensation offered a candidate will be dependent on a variety of factors including, but not limited to, the candidate's experience, qualifications, location, training, licenses, shifts worked and compensation model. Carle Health offers a comprehensive benefits package for team members and providers. To learn more visit careers.carlehealth.org/benefits.

NYC Health + Hospitals is the largest public health care system in the nation. We are a network of 11 hospitals, trauma centers, neighborhood health centers, nursing homes, post-acute care centers, and correctional health services. We are a home care agency and a health plan, MetroPlus. Our health system provides essential services to 1.4 million New Yorkers every year in more than 70 locations across the city's five boroughs. Our diverse workforce of more than 42,000 employees are uniquely focused on empowering New Yorkers, without exception, to live the healthiest life possible. Visit us at nychhc.org and stay connected on facebook.com/nyc HHC or Twitter@hhcnyc. NYC Health + Hospitals/Correctional Health Services is one of the nation's leading correctional health care systems in quality of and innovations to care, and access from pre-arraignment through compassionate release. In-jail services include medical, nursing, mental health, substance use treatment, social work, dental and vision care, discharge planning, and reentry support. In addition to providing direct patient care in the jails, CHS leverages the resources of the nation's largest municipal health care system to help discharged patients successfully return to their communities. CHS is also a pivotal partner in New York City's criminal justice reform efforts. Summary of position: The Quality Assurance (QA) Radiological Technologist position encompasses responsible, administrative and clinical activity of varying degrees of latitude. Clinical level judgement is needed in the daily supervision of radiological functions and patient care, and departmental projects. Responsibilities include: Review exam orders, consult with radiologist, schedule patients and arrange for transportation as indicated. Identify patient and document all information pertinent to final report in the RIS and on images (PACS). Prepare allpatients (infants, children,adolescents, adults andgeriatric) for radiological procedures requested bythe clinician. Arrange for proper protection of patients, public andstaff from infectious diseases/materials. Perform allgeneral diagnostic imaging and routine examination in CT and Angiography. Assists inperforming daily checks of radiographic imaging equipment, immobilization devices and other necessary accessories. Enters data and maintains documents and logsas required andmandated by the department QAguidelines and various regulatory agencies. Maintains adequate stocks of supplies andmaterials needed foruse in thedepartment. Checks equipment for defects prior for useand assures proper use of such equipment through instruction and review. Report any unexpected patientincidents in accordance with theoccurrence report protocol. Maintain and exercise all mandated radiation safety regulations. Maintain basic care of all the imaging equipment. All malfunctions are to be reported to management staff whether mechanical, electrical or suspect and service request documentation completed. Maintain a clean and safe work environment for both patients and staff. Perform other duties as deemed necessary (by supervisory oradministrative staff) inthe event of emergencies ordisasters. Continue professional growth and development of job-related skills on an ongoing basis. Participate in continuing education activities. Ensure allexaminations are accessioned, documented and sentto PACS forreading. Monitor PACS and RIS incomplete worklists to ensure all exams arecompleted. In accordance with HIPAA (the Health Insurance Portability and Accountability Act), staff members will exercise due diligence in ensuring patient privacy and confidentiality. Identifies activities thatthe network hasimplemented to promote patient safety andtakes all necessary precautions to ensure a safe environment for patients, visitors andstaff. In addition to the Radiology Technologist job functions, the QA Technologists is responsible for the following: Organize and file maintenance reports for each building in regards to dentistry and radiology x-ray equipment and ensure dentistry and x-ray equipment follow the Department of Health codes, policies and procedures. Participates in quality assurance activities, including coordination, control and maintenance of technical equipment. Establish a daily/weekly/monthly quality control routine for monitoring, evaluating, and maintenance of X-ray equipment to ensure optimal performance and stability. Documenting and maintaining records for the quality control program in accordance with applicable regulations, legal requirements, accrediting agencies and recommendations from equipment manufacturers. Performs research and participates in special projects involving evaluation of equipment and delivery of service. Work with our radiologists to obtain updated documentation of primary diagnostic monitors. Distribute/collect dosimeter badges from each employee/facility that works with x-ray equipment. Recommends area assignment of personnel to coordinate activities within the department with other activities and services and represents the department in interdepartmental operations and meetings. May be assigned duties and responsibilities of X-ray Director in regards to radiology department workflow. Department Preferences: Possession of a current valid license as a General Radiological Technologist issued by the State of New York. A minimum of two years of experience as a Radiological Technologist. A current member of the American Registry of Radiologic Technologists (ARRT). Valid BLS required. Must possess a valid driver's license. Must be proficient in Microsoft Office Suite. Minimum Qualifications: Assignment Level III 1. For Supervisory Assignments: a valid license and current registration to practice Diagnostic Radiography as a Radiologic Technologist issued by the NYSDOH; and two (2) years of Radiologic Technologist experience performing duties consistent with Assignment Levels I and II, one (1) year of which must have been in a supervisory capacity. 2. For Specialized Imaging Assignments: a valid license and current registration to practice Diagnostic Radiography as a Radiologic Technologist issued by the NYSDOH; and possession of a current advanced- level certification for the performance of these procedures.

NYC Health + Hospitals is the largest public health care system in the nation. We are a network of 11 hospitals, trauma centers, neighborhood health centers, nursing homes, post-acute care centers, and correctional health services. We are a home care agency and a health plan, MetroPlus. Our health system provides essential services to 1.4 million New Yorkers every year in more than 70 locations across the city's five boroughs. Our diverse workforce of more than 42,000 employees are uniquely focused on empowering New Yorkers. NYC Health + Hospitals/Correctional Health Services is one of the nation's leading correctional health care systems in quality of and innovations to care, and access from pre-arraignment through compassionate release. In-jail services include medical, nursing, mental health, substance use treatment, social work, dental and vision care, discharge planning, and reentry support. In addition to providing direct patient care in the jails, CHS leverages the resources of the nation's largest municipal health care system to help discharged patients successfully return to their communities. CHS is also a pivotal partner in New York City's criminal justice reform efforts. Work Shifts Time: 8a-4p Days: Mon-Fri Facility: CDU-WF facility on Rikers Island Duties & Responsibilities The Quality Assurance (QA) Radiological Technologist position encompasses responsible, administrative and clinical activity of varying degrees of latitude. Clinical level judgement is needed in the daily supervision of radiological functions and patient care, and departmental projects. Responsibilities include: Review exam orders, consult with radiologist, schedule patients and arrange for transportation as indicated. Identify patient and document all information pertinent to final report in the RIS and on images (PACS). Prepare all patients (infants, children, adolescents, adults and geriatric) for radiological procedures requested by the clinician. Arrange for proper protection of patients, public and staff from infectious diseases/materials. Perform all general diagnostic imaging and routine examination in CT and Angiography. Assists in performing daily checks of radiographic imaging equipment, immobilization devices and other necessary accessories. Enters data and maintains documents and logs as required and mandated by the department QA guidelines and various regulatory agencies. Maintains adequate stocks of supplies and materials needed for use in the department. Checks equipment for defects prior for use and assures proper use of such equipment through instruction and review. Report any unexpected patient incidents in accordance with the occurrence report protocol. Maintain and exercise all mandated radiation safety regulations. Maintain basic care of all the imaging equipment. All malfunctions are to be reported to management staff whether mechanical, electrical or suspect and service request documentation completed. Maintain a clean and safe work environment for both patients and staff. Perform other duties as deemed necessary (by supervisory or administrative staff) in the event of emergencies or disasters. Continue professional growth and development of job-related skills on an ongoing basis. Participate in continuing education activities. Ensure all examinations are accessioned, documented and sent to PACS for reading. Monitor PACS and RIS incomplete worklists to ensure all exams are completed. In accordance with HIPAA (the Health Insurance Portability and Accountability Act), staff members will exercise due diligence in ensuring patient privacy and confidentiality. Identifies activities that the network has implemented to promote patient safety and takes all necessary precautions to ensure a safe environment for patients, visitors and staff. In addition to the Radiology Technologist job functions, the QA Technologists is responsible for the following: Organize and file maintenance reports for each building in regards to dentistry and radiology x-ray equipment and ensure dentistry and x-ray equipment follow the Department of Health codes, policies and procedures. Participates in quality assurance activities, including coordination, control and maintenance of technical equipment. Establish a daily/weekly/monthly quality control routine for monitoring, evaluating, and maintenance of X-ray equipment to ensure optimal performance and stability. Documenting and maintaining records for the quality control program in accordance with applicable regulations, legal requirements, accrediting agencies and recommendations from equipment manufacturers. Performs research and participates in special projects involving evaluation of equipment and delivery of service. Work with our radiologists to obtain updated documentation of primary diagnostic monitors. Distribute/collect dosimeter badges from each employee/facility that works with x-ray equipment. Recommends area assignment of personnel to coordinate activities within the department with other activities and services and represents the department in interdepartmental operations and meetings. May be assigned duties and responsibilities of X-ray Director in regards to radiology department workflow. Minimum Qualifications Assignment Level III 1. For Supervisory Assignments: a valid license and current registration to practice Diagnostic Radiography as a Radiologic Technologist issued by the NYSDOH; and two (2) years of Radiologic Technologist experience performing duties consistent with Assignment Levels I and II, one (1) year of which must have been in a supervisory capacity. 2. For Specialized Imaging Assignments: a valid license and current registration to practice Diagnostic Radiography as a Radiologic Technologist issued by the NYSDOH; and possession of a current advanced- level certification for the performance of these procedures. Department Preferences Possession of a current valid license as a General Radiological Technologist issued by the State of New York. A minimum of two years of experience as a Radiological Technologist. A current member of the American Registry of Radiologic Technologists (ARRT). Valid BLS required. Must possess a valid driver's license. Must be proficient in Microsoft Office Suite. Additional Salary Compensation All Radiologic Technologists in Assignment Levels II and III shall receive a differential of $7,500 per annum to be cross-trained on different modalities of radiologic imaging and to be cross-assigned (once trained) to different imaging settings depending on patient volume and staffing needs within a facility. Benefits NYC Health and Hospitals offers a competitive benefits package that includes: Comprehensive Health Benefits for employees hired to work 20+ hrs. per week Retirement Savings and Pension Plans Paid Holidays and Vacation in accordance with employees' Collectively bargained contracts Loan Forgiveness Programs for eligible employees College tuition discounts and professional development opportunities College Savings Program Union Benefits for eligible titles Multiple employee discounts programs Commuter Benefits Programs

It's fun to work in a company where people truly BELIEVE in what they're doing! Apply fast, check the full description by scrolling below to find out the full requirements for this role. Our intention is to haveemployees who are passionate about making their personal mission statement come to life each day at work! Be it through providing healing, eradicating loneliness,contributing to efficiencies, streamliningprocesses, beingdependable,sparking creativity or something else,the demonstration of HOW you do your job is just as important as WHAT you do in your job. Alongsideour valued employees, we are making a difference throughout the state of Ohio in the lives of those that need healthcareorthoseembracingthe next chapter of their lives.Sustained members of our team demonstrate accountable behavior and share our values of customer service, innovation, integrity, inclusion, financial stewardship, leadership and care. The Maintenance Technician provides oversight of all HVAC equipment through preventative maintenance schedules and maintenance cycles to reduce equipment failures and improve staff and resident comfort during the heating and cooling seasons and performs other day-to-day activities of the Maintenance Department in accordance with company standards and federal, state, and local standards, guidelines, and regulations governing the community to ensure that it is maintained in a clean, safe, and comfortable manner. Essential Activities and Tasks Operations Management - 80% Performs routine HVAC, electrical, mechanical, plumbing, carpentry, painting and finishing, and maintenance on facilities, equipment, grounds, parking areas, sidewalks, etc. Services HVAC equipment through preventative maintenance schedules and maintenance cycles. Troubleshoots, provides maintenance, and repairs the technical components of the community including HVAC, pumps, motors, etc. Troubleshoots, provides maintenance, and repairs electrical systems per NEC guidelines. Troubleshoots, provides maintenance, and repairs plumbing systems per local codes. Informs supervisor of supply and/or equipment needs. Performs unscheduled maintenance tasks. Completes assigned work orders within 24-48 hours. Maintains a state of readiness for survey by regulatory bodies. Ensures a clean and safe environment for the residents, staff members, and visitors in all areas of the community by escorting vendors, assisting with inventory, conducting training, and serving as a working team leader as needed. May coordinate maintenance services and activities with other departments (i.e. Nursing, Culinary and Nutritional Services, etc.). Serves as back-up to security personnel and responds accordingly performing necessary rounds and completing reports as needed. Quality, Compliance, and Risk Management - 15% Ensures that work areas are clean and that equipment, tools, supplies, etc. are in proper working order and are stored appropriately. Ensures that established quality assurance, infection control, and universal precaution practices are maintained when performing maintenance procedures. Performs duties in accordance with all safety and OSHA requirements and ensures departmental staff does the same. Maintains current and accurate records through use of computers and/or other documentation in accordance with company standards and federal, state, and local standards, guidelines, and regulations. Works with others on the development, implementation, and maintenance of emergency disaster programs (i.e. fire, severe weather, etc.). Willingly and consistently shares observations and insights of departmental operations that may improve quality and efficiencies of department. Attends all-employee and departmental meetings and in-service training as scheduled or as directed. Customer Relations and Service Delivery - 5% Listens and responds to the needs of residents and staff members. Honors resident personal and property rights when performing maintenance duties. All other duties as assigned. Qualifications Education High school diploma or equivalent required. Current certification to handle refrigerants a plus but not required. Current HVAC certification a plus but not required. Current Boiler Operator License and Steam Engineer License a plus but not required. Experience Three years experience in a maintenance position required. Strong knowledge of HVAC, boilers, compressors and generators, and various mechanical, electrical, and plumbing systems. Knowledge of building codes, safety, EPA, and OSHA regulations preferred. Experience reading and interpreting blueprints preferred. Proficiency with Windows, Microsoft Office (Word, Excel, PowerPoint), and the internet preferred. Other Requirements Must be able to read, write, speak, and understand the English language. Must possess a valid driver's license and acceptable driving record. xevrcyc Must be insurable under professional liability and crime coverage policies as specified by insurance carrier underwriting standards. Working Conditions and Special Requirements Sitting- Up to 4 hours/day Standing- Up to 8 hours/day Walking- Up to 6 hours/day Lifting, transferring, pushing or pulling residents/patients or equipment/supplies- Up to 100 pounds Driving- Up to 1 hour/day Work weekends, evenings, and holidays- As needed for coverage On-call availability- 24/7 for emergencies Subject to residents/patients with various disease processes- Occasional Subject to falls, burns, odors, and cuts- Work day May be exposed to infectious waste, disease, conditions, etc. including exposure to the AIDS and Hepatitis B viruses- Work day Risk Category for Exposure to Bloodborne Diseases- II

We're a “safety first high performance” culture driven by a zero waste and zero defect mentality set out to enrich the lives of humans everywhere. As a leading vitamin and food supplement manufacturer, we carry on the legacy of our Founder who led us to reshape the category. We have grown our passionate Piping Rock Family as we've grown our business. We are growing quickly, join the Piping Rock family and grow your career. As a Process Engineer, you'll be responsible for equipment re-design while implementing, controlling, and optimizing packaging/manufacturing processes and machinery to achieve organizational targets. You'll work hand in hand with Production and Engineering to help improve standards that enable high performing production processes in our facility. Additional responsibilities include defining equipment standards, leading process and benchmarking and reapplication, and building capability within teams to do technical troubleshooting and process improvement and understanding the Piping Rock Continuous Excellence program and the respective tools. Responsibilities: Analyze production loss data to identify and prioritize projects to be executed in factory's continuous improvement plan and develop technical mastery of the core production processes, driven by bottleneck/high losses. Lead v-curve analysis and balanced line flow studies and identify debottlenecking projects. Initiate, lead, and modify process/improvements that will increase throughput, reduce scrap, improve quality, and eliminate losses. Implement LEAN manufacturing methods. Drive and mobilize resources to conduct problem solving on systems or equipment through failure modes & effects analysis (FMEA) and other Six Sigma methodology. Develop productivity standards, collect data to publish KPI and OEE reports. Participate in planning, commissioning, and startup of new equipment/processes. Creating and improving standards that enable sustainability of high preforming production processes and supporting training programs that develop high performing operators and technicians and. Collaborating with technical experts, other functions, and other factories to create and replicate optimal solutions/best practices. Establish operating parameters for each equipment by product to obtain reliable and efficient production Responsible for working directly on the manufacturing lines and assisting mechanics during repairs to understand the process workflow. Work schedule flexibility to overlap with other shifts as needed. Other duties as assigned. Qualifications: Bachelor's degree in an engineering field, preferably Industrial and Systems Engineering 3+ years of project/ process management experience in a manufacturing, or packaging environment. Or Associates degree in a technical field. 7+ years of project/ process management experience in a manufacturing, or packaging environment. Preferred Skills: Six Sigma or Lean certification. Experience with process automation and control systems. GMP environment a plus Must be able to lift 30lbs Must be able to stand for 8 hours Must be able to work in a physically challenging environment. We proudly offer: Medical, Dental, Vision, 401K with Company Match, Pet insurance and more! We reward the hard work of our team members with fun and exciting company events, Summer Picnic, Festive Packages, Holiday Celebrations, and associate referral bonuses! Founded in 2011, Piping Rock Health Products has gone on to win Long Island's Top Workplaces Award 6 years in a row & securing the spot as Top Supplement Manufacturing Company 2024 by Food Business Review! Supported by a group of vitamin visionaries with over 40 years of industry experience and a carefully curated team of talented associates. Piping Rock is a global vitamin and supplement manufacturer with an unwavering commitment to creating quality wellness products. We believe that family always comes first, and that the dedication of our associates is the key ingredient to our success. We are drug free workplace, regulated by the FDA, required to follow Federal Guidelines; therefore in order to start as well as maintain employment, you must be able to successfully clear drug screening processes, which include testing for all illegal substances per Federal Guidelines. Piping Rock Health Products, INC is an Equal Opportunity Employer.

Versiti is a fusion of donors, scientific curiosity, and precision medicine that recognize the gifts of blood and life are precious. We are home to the world-renowned Blood Research Institute, we enable life saving gifts from our donors, and provide the science behind the medicine through our diagnostic laboratories. Versiti brings together outstanding minds with unparalleled experience in transfusion medicine, transplantation, stem cells and cellular therapies, oncology and genomics, diagnostic lab services, and medical and scientific expertise. This combination of skill and knowledge results in improved patient outcomes, higher quality services and reduced cost of care for hospitals, blood centers, hospital systems, research and educational institutions, and other health care providers. At Versiti, we are passionate about improving the lives of patients and helping our healthcare partners thrive. Position Summary Under the direction of the department leadership, prepares quality biological blood components within the prescribed time following regulatory and operational standards as specified in the Standard Operating Procedures and departmental procedures. WHEN YOU WILL WORK: 3rd Shift: Sunday-Thursday, 11:00pm-7:30am On-call availbility as needed Full Time, Non-Exempt role Training schedule may differ from traditional schedule. COMPENSATION: $18.04/hr.+ based on experience - paid training provided Benefits eligible including medical/dental/vision insurance options, 7% 401(k) match, EAP, employee wellness program, generous PTO, and more. Shift differentials for evenings/weekends Evenings (after 6:00pm) - $1.50/hr. Weekends - $2.00/hr. Total Rewards Package Benefits Versiti provides a comprehensive benefits package based on your job classification. Full-time regular employes are eligible for Medical, Dental, and Vision Plans, Paid Time Off (PTO) and Holidays, Short- and Long-term disability, life insurance, 7% match dollar for dollar 401(k), voluntary programs, discount programs, others. Responsibilities Manufactures Red Blood Cells (RBCs), Fresh Frozen Plasma and Recovered Plasma Manufactures Neonatal RBCs. Sterile docks Pedipaks to Platelet Apheresis, Neonatal RBCs Performs leukoreduction of Whole Bloods and RBCs Manufactures Cryoprecipitate, Pooled Cryoprecipitate and Cryo Reduced Plasma Labels products to meet regulatory and inventory requirements Manufactures additional specialty products as needed by customer base Follows procedures pertaining to the proper storage of RBCs, platelet products and frozen products Performs and documents equipment function checks and QC as required Maintains a level of productivity that allows department to achieve production goals Works weekend, holiday rotations and on-call, as needed Other duties, as assigned Performs other duties as assigned Complies with all policies and standards Qualifications Education High School Diploma required equivalent required Experience Less than 1 year 1-6 months related experience and/or training or equivalent combination of education and experience required Knowledge, Skills and Abilities Ability to read, interpret, and write documents such as operating forms, operating and maintenance instructions, and other department manuals required Above average attention to detail and problem-solving skills required Ability to apply judgment to written or oral instructions required Aptitude for computers and data entry skills required Ability to manage interruptions in a fast-paced environment required Customer service and communication skills required Able to organize work to provide productive work flow needed in component manufacturing required Flexibility to work independently and with a team required Organized, able to prioritize and handle multiple tasks at one time required Be able and available to work a flexible working schedule as required based on volume and timing of blood collections required Ability to work independently with limited written or oral instruction required Understands military time required Tools and Technology General office equipment (computer, printer, fax, copy machine) required Microsoft Suite (Word, Excel, PowerPoint, Outlook) required Software systems (Blood Establishment Computer Systems, Title21) required Lab specific equipment, including, but not limited to: • Sealers • Centrifuge • Water bath • Scales required Not ready to apply? Connect with us for general consideration.

Responsible for the decontamination, cleaning, processing, and sterilization of trays, instruments, supplies, and equipment following all infection control practices. Responsible for dispensing equipment upon request. Maintains accurate records and departmental inventory usage. Responsible for case cart building and responds to requests from surgery. Helps with managing workflow, completing QA's on the sterilizer loads, and assisting the supervisor in co-worker assignments in order for the work to continually flow through the dept. EDUCATION: Must have high school diploma or GED and be a Certified Registered Central Service Technician. YEARS OF EXPERIENCE: 2 years as a Certified Technician LICENSES & CERTIFICATIONS: Certified Technician Training: * Follows established guidelines for the orientation of new hires rotating within area of responsibility. * Completes competency evaluations for each new hire after completing rotation relevant to area of responsibility. * Participates in departmental meetings by providing positive reinforcement of procedures and information required to maintain a superior work environment. * In-services staff on new processes and retrains as necessary. Actively assist with training of all personnel. PERFORMS DECONTAMINATION FUNCTIONS: * Disassembles, cleans, and disinfects instruments and equipment used for patient care utilizing correct manual and mechanical processes. * Operates equipment used in the decontamination process, i.e. sonic washer, cart washers, washer sterilizers and decontaminators. * Transports case carts from soiled holding area in surgery to decontamination room. * Unloads case cart containing soiled instruments and places in designated area. Places case carts in cart washer. * Performs cleaning tasks in work area as assigned. * Uses universal precautions when working in decontamination area (i.e., gloves, face shields, protective gown). * Utilizes SPM computer system to track instruments and case carts. * Makes rounds throughout the facility to retrieve reusable instruments and equipment and transports back to the Sterile Processing Department. * Helps with managing workflow and departmental resources. * Performs and monitors Quality Assurance monitoring to meet AAMI, AORN CDC, and OSHA performance standards. * Trains staff to new processes and documents the competency of each. ASSEMBLES INSTRUMENT TRAYS AND PACKS: * Unloads instruments from washer sterilizers and distributes to appropriate workstations. * Assembles instrument trays and packs utilizing written instructions and proper protocol. * Checks for sharpness and proper functioning of instruments. * Recognizes and memorizes a large variety of instruments. * Applies sterilization wrappers properly to maintain the integrity of the contents. * Utilizes heat sealer on packs as needed. * Each item is identified correctly on the outside packaging of each item. * Loads sterilizer carriage and transports trays to sterilization area. * Helps with managing workflow and departmental resources * Assigns preceptors and monitors the progress of new staff working closely with the department Educator. OPERATES STERILIZERS, DOCUMENTS LOADS, AND RETURNS STOCK TO APPROPRIATE AREA: * Checks trays, packs, and basins on sterilizer carriage making certain that correct procedures have been utilized. * Able to operate each type of sterilizer. Selects correct cycle and time period required for specified load. * Knowledgeable of all methods of sterilization (i.e., Sterrad, Steam) * Accurately documents all sterilization information. This can be completed manually or through the use of a computer. * Biological monitoring is completed per departmental policy. * Sterile instruments and supplies are handled properly and restocked in sterile storage area. All items are rotated as required. * All equipment is continuously monitored to ensure it is functioning properly. * Performs QA checks on sterilizers, documenting results and assuring compliance. * Helps with managing workflow and departmental resources. BUILDS SURGICAL CASE CARTS : * Surgical preference lists are obtained from computer to build case cart. * Location of instruments and supplies are labeled to increase efficiency. * Performs quality control final check before items leave the department. * Completed case carts are distributed to specified area. * Procedural carts used in all patient care areas are restocked, stored, or returned to appropriate area. * Performs Quality Assurance monitoring of Case Cart builds to assure carts are complete and accurate. Staffing Utilization: * Utilizes staffing and resources in a timely, effective, and efficient manner as evidenced by the delivery of services provided by the department. * Monitors staff to ensure procedures in all areas of responsibility are being followed to expectations. * Communicates effectively with all staff members. * Empowers staff to perform independently and demonstrates effective decision making qualities through measurable results. * Productivity of staff is monitored and improvements implemented to enhance customer services. * Directs daily assignments and coordinates work assignments of personnel with others in leadership roles. * Working closely to the Supervisor, the Senior Technician will monitor the workflow and determine areas of need and direct staff to accommodate the needs of the department. Monitors the Surgery Scheduler to identify conflicts and makes adjustments when needed. Training: * Follows established guidelines for the orientation of new hires rotating within area of responsibility. * Serves as the lead training preceptor, assigning other preceptors and trainees. * Completes competency evaluations for each new hire after completing rotation relevant to area of responsibility. * Participates in departmental meetings by providing positive reinforcement of procedures and information required to maintain a superior work environment. * In-services staff on new processes and retrains as necessary. * Actively assist with training of all personnel. OTHER: * Fulfills requests from OR core areas when requested. * Assists with one-on-one training of other associates. * Responds to emergency codes when required. * Follows instructions and departmental guidelines regarding sterility. * Attends departmental-in-services and mandatory meetings. * Knowledgeable of all areas in the Sterile Processing Department. * Acts as a liaison between the Sterile Processing Department and all customers and communicates in a courteous manner. * Makes effective use of time and is able to distinguish between low and high priority activities. * Supports departmental quality improvement programs and assists with overseeing statistical information for projects as needed. * Provides objective feedback regarding staff evaluations

Job Description Join our team at BioSpectra, Inc., where we lead the way in delivering high-purity ingredients to the top 25 pharmaceutical companies globally. We are dedicated to maintaining the highest standards of excellence in the industry. Currently we are looking for a Chemical Manufacturing Technician to kickstart their career with us in either the Bangor or East Stroudsburg location. We are currently hiring for day shift and night shift and must have the flexibility to work/travel between the Bangor and East Stroudsburg location. BioSpectra, Inc. is a privately held, family-oriented organization and a U.S. based manufacturer of GMP pharmaceutical-grade ingredients, including API's, excipients, GMP process chemicals, and bulk GMP buffers and solutions. BioSpectra, Inc. currently has facilities located in Bangor, Wind Gap, Stroudsburg, PA and Scarborough, Canada. Position Summary The Chemical Manufacturing Technician I will run all chemical manufacturing processes in compliance with all associated quality systems. Packs and ships all products. Maintains processes in their validated or compliant state. Major Roles and Responsibilities: •Reads and follows written and electronic batch records •Ability to record data in accordance with Good Manufacturing Practices (GMP) •Operates Powered Industrial Vehicles to move product, as needed •Handles lab equipment to monitor product dryness using lab moisture balance •Cleans reactors, filters and other process related equipment, process rooms, general cleaning •Records appropriate steps on batch record and associated documents •Understands and complies with quality regulations as they relate to job responsibilities •Complies with good housekeeping and safety rules •Understands various process pumps •Operates various process pumps •Troubleshoots process related equipment- type of equipment is dependent on operator level •Shovels product from bin into dryer feed hopper •Scoops product from drums and weighs amounts •Rolls drums onto and off from skids •Accurately weighs material on scales during final packaging in accordance with packaging documentation. •Monitors in-process batches with regard to temperature, clarity, volume, etc. •Documents value points per SOP •Takes bags off skids and empties contents into reactor •Changes cartridges on various filters •Continuous Processes •Frequent Respirator use •Other duties may be assigned as deemed appropriate by management Qualifications: •High School diploma or GED. •Ability to perform simple mathematical calculations using a calculator. •Ability to accurately read and take measurements including reading a tape measure. •Ability to read and interpret/follow production procedures. •Must be able to read, write, speak, and understand English. Physical Requirements: •Movement - Standing and Walking for up to 12 hours of the shift. Walking up to 5 miles a day. •Lifting & Moving - Must be able to lift and carry 20 to 80 lbs. repeatedly multiple times in a shift. Pushing & pulling up to 200 lbs. •Other Movements - Bending and reaching required multiple times per shift. Crouching, Stooping and Kneeling a moderate amount of time per shift. Climbing stairs, ladders, scaffolds and ramps required multiple times throughout shift including but not limited to climbing height up to 12 feet. •Other Physical Requirements - Use of a computer and keyboard throughout the shift. Required to perform handwriting and typing throughout the day. Frequently working with Electronic Batch Records. Occasional forklift use. •Speaking, Hearing & Visual - Must be able to speak clearly and present well to others. Hearing is required constantly throughout shift. Must be able to see near, distant and peripheral objects all the time. •Environmental - Frequent warm climates indoors. Temperatures will vary with conditions and tasks. Exposure to exterior noise as well as internal machinery noise. Must be able to put on personal protective equipment throughout shift. Must be able to work in smaller rooms and/or confined spaces. •Cognitive - Must learn new policies, procedures, retain and perform tasks assigned. Must maintain focus, be alert and aware at all times. Must be able to maintain focus at all times.

Join our team at BioSpectra, Inc., where we lead the way in delivering high-purity ingredients to the top 25 pharmaceutical companies globally. We are dedicated to maintaining the highest standards of excellence in the industry. Currently we are looking for a Chemical Manufacturing Technician to kickstart their career with us in either the Bangor or East Stroudsburg location. We are currently hiring for day shift and night shift and must have the flexibility to work/travel between the Bangor and East Stroudsburg location. BioSpectra, Inc. is a privately held, family-oriented organization and a U.S. based manufacturer of GMP pharmaceutical-grade ingredients, including API's, excipients, GMP process chemicals, and bulk GMP buffers and solutions. BioSpectra, Inc. currently has facilities located in Bangor, Wind Gap, Stroudsburg, PA and Scarborough, Canada. Position Summary The Chemical Manufacturing Technician I will run all chemical manufacturing processes in compliance with all associated quality systems. Packs and ships all products. Maintains processes in their validated or compliant state. Major Roles and Responsibilities: •Reads and follows written and electronic batch records •Ability to record data in accordance with Good Manufacturing Practices (GMP) •Operates Powered Industrial Vehicles to move product, as needed •Handles lab equipment to monitor product dryness using lab moisture balance •Cleans reactors, filters and other process related equipment, process rooms, general cleaning •Records appropriate steps on batch record and associated documents •Understands and complies with quality regulations as they relate to job responsibilities •Complies with good housekeeping and safety rules •Understands various process pumps •Operates various process pumps •Troubleshoots process related equipment- type of equipment is dependent on operator level •Shovels product from bin into dryer feed hopper •Scoops product from drums and weighs amounts •Rolls drums onto and off from skids •Accurately weighs material on scales during final packaging in accordance with packaging documentation. •Monitors in-process batches with regard to temperature, clarity, volume, etc. •Documents value points per SOP •Takes bags off skids and empties contents into reactor •Changes cartridges on various filters •Continuous Processes •Frequent Respirator use •Other duties may be assigned as deemed appropriate by management Qualifications: •High School diploma or GED. •Ability to perform simple mathematical calculations using a calculator. •Ability to accurately read and take measurements including reading a tape measure. •Ability to read and interpret/follow production procedures. •Must be able to read, write, speak, and understand English. Physical Requirements: •Movement - Standing and Walking for up to 12 hours of the shift. Walking up to 5 miles a day. •Lifting & Moving - Must be able to lift and carry 20 to 80 lbs. repeatedly multiple times in a shift. Pushing & pulling up to 200 lbs. •Other Movements - Bending and reaching required multiple times per shift. Crouching, Stooping and Kneeling a moderate amount of time per shift. Climbing stairs, ladders, scaffolds and ramps required multiple times throughout shift including but not limited to climbing height up to 12 feet. •Other Physical Requirements - Use of a computer and keyboard throughout the shift. Required to perform handwriting and typing throughout the day. Frequently working with Electronic Batch Records. Occasional forklift use. •Speaking, Hearing & Visual - Must be able to speak clearly and present well to others. Hearing is required constantly throughout shift. Must be able to see near, distant and peripheral objects all the time. •Environmental - Frequent warm climates indoors. Temperatures will vary with conditions and tasks. Exposure to exterior noise as well as internal machinery noise. Must be able to put on personal protective equipment throughout shift. Must be able to work in smaller rooms and/or confined spaces. •Cognitive - Must learn new policies, procedures, retain and perform tasks assigned. Must maintain focus, be alert and aware at all times. Must be able to maintain focus at all times.

Job Description Join our team at BioSpectra, Inc., where we lead the way in delivering high-purity ingredients to the top 25 pharmaceutical companies globally. We are dedicated to maintaining the highest standards of excellence in the industry. Currently we are looking for a Chemical Manufacturing Technician to kickstart their career with us in either the Bangor or East Stroudsburg location. We are currently hiring for day shift and night shift and must have the flexibility to work/travel between the Bangor and East Stroudsburg location. BioSpectra, Inc. is a privately held, family-oriented organization and a U.S. based manufacturer of GMP pharmaceutical-grade ingredients, including API's, excipients, GMP process chemicals, and bulk GMP buffers and solutions. BioSpectra, Inc. currently has facilities located in Bangor, Wind Gap, Stroudsburg, PA and Scarborough, Canada. Position Summary The Chemical Manufacturing Technician I will run all chemical manufacturing processes in compliance with all associated quality systems. Packs and ships all products. Maintains processes in their validated or compliant state. Major Roles and Responsibilities: •Reads and follows written and electronic batch records •Ability to record data in accordance with Good Manufacturing Practices (GMP) •Operates Powered Industrial Vehicles to move product, as needed •Handles lab equipment to monitor product dryness using lab moisture balance •Cleans reactors, filters and other process related equipment, process rooms, general cleaning •Records appropriate steps on batch record and associated documents •Understands and complies with quality regulations as they relate to job responsibilities •Complies with good housekeeping and safety rules •Understands various process pumps •Operates various process pumps •Troubleshoots process related equipment- type of equipment is dependent on operator level •Shovels product from bin into dryer feed hopper •Scoops product from drums and weighs amounts •Rolls drums onto and off from skids •Accurately weighs material on scales during final packaging in accordance with packaging documentation. •Monitors in-process batches with regard to temperature, clarity, volume, etc. •Documents value points per SOP •Takes bags off skids and empties contents into reactor •Changes cartridges on various filters •Continuous Processes •Frequent Respirator use •Other duties may be assigned as deemed appropriate by management Qualifications: •High School diploma or GED. •Ability to perform simple mathematical calculations using a calculator. •Ability to accurately read and take measurements including reading a tape measure. •Ability to read and interpret/follow production procedures. •Must be able to read, write, speak, and understand English. Physical Requirements: •Movement - Standing and Walking for up to 12 hours of the shift. Walking up to 5 miles a day. •Lifting & Moving - Must be able to lift and carry 20 to 80 lbs. repeatedly multiple times in a shift. Pushing & pulling up to 200 lbs. •Other Movements - Bending and reaching required multiple times per shift. Crouching, Stooping and Kneeling a moderate amount of time per shift. Climbing stairs, ladders, scaffolds and ramps required multiple times throughout shift including but not limited to climbing height up to 12 feet. •Other Physical Requirements - Use of a computer and keyboard throughout the shift. Required to perform handwriting and typing throughout the day. Frequently working with Electronic Batch Records. Occasional forklift use. •Speaking, Hearing & Visual - Must be able to speak clearly and present well to others. Hearing is required constantly throughout shift. Must be able to see near, distant and peripheral objects all the time. •Environmental - Frequent warm climates indoors. Temperatures will vary with conditions and tasks. Exposure to exterior noise as well as internal machinery noise. Must be able to put on personal protective equipment throughout shift. Must be able to work in smaller rooms and/or confined spaces. •Cognitive - Must learn new policies, procedures, retain and perform tasks assigned. Must maintain focus, be alert and aware at all times. Must be able to maintain focus at all times.

Department/Unit: Sterile Processing Work Shift: Day (United States of America) Salary Range: $37,440.00 - $48,672.00 Sterile Processing: Performs all Sterile Processing functions: retrieval and decontamination of soiled/ used surgical instrumentation; inspects, assembles and packages delicate instrumentation; operates sterilization equipment; transports supplies, builds case carts for the operating room, processes instrumentation, operates cleaning equipment and replenishes stocks. Expected to rotate through all area functions. Ability to perform routine key entry of data involving SPD produced items into computerized inventory management system. Use of T-DOC instrument tracking computerized system. Details-oriented: assembles parts into identical finished products according to established procedures. Must have strong knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. You must be able to READ, SPEAK, WRITE AND INTERPRET ENGLISH in order to adequately perform critical thinking and interpretation of the OR's and manufacturers' IFUs. Must have strong communication skills both verbal and written to clearly and effectively communicate with all sterile processing customers. Identifies problems, collects data, establishes facts, and draws valid conclusions. Solves practical problems and deals effectively with a variety of situations where only limited standardization exists. Interprets a variety of instructions in written, oral, diagram or schedule form. While performing the duties of this job, the employee is regularly required to stand, walk, use hands to probe, handle, or feel objects, tools, or controls, reach with hands and arms, and speak and hear. The employee is occasionally required to sit and stoop, kneel, or crouch. The employee must regularly push loads up to 120 pounds and do repetitive loading/unloading of products up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. OSHA BLOOD BORNE PATHOGEN EXPOSURE POTENTIAL: Level 1 - tasks involve possible exposure to blood, body fluids, or tissue; probability of exposure is a condition of employment. The function involves handling of both clean and soiled sharp instruments, needles, and cleaning chemicals; meticulous reassembly of fine surgical instrumentation Some danger of skin burns (steam burns); working with hot (270 degree F) metal objects; potential exposure to hazardous chemicals (Hydrogen Peroxide, Glutaraldehyde, etc.) and other potentially hazardous cleaning agents. Must observe and practice universal precautions. Thank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer. This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that: Access to information is based on a "need to know" and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.

Department/Unit: Sterile Processing Work Shift: Evening (United States of America) Salary Range: $37,440.00 - $48,672.00 The Sterile Processing Technician is assigned duties performing decontamination, preparation, sterilization and distribution of surgical instruments and medical equipment throughout the surgery center, utilizing infection control and safety practices during all phases of the process. Knowledge, Skills, and Abilities: * Knowledge of equipment function to be able to determine operational adequacy and to distinguish between operator error and equipment malfunction. * Ability to perform routine key entry of data involving SPD produced items into computerized inventory management system. Use of T-DOC instrument tracking computerized system. Details-oriented: assembles parts into identical finished products according to established procedures * Must have strong knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar. You must be able to READ, SPEAK, WRITE AND INTERPRET ENGLISH in order to adequately perform critical thinking and interpretation of the OR's and manufacturers' IFUs. Must have strong communication skills both verbal and written to clearly and effectively communicate with all sterile processing customers. * Identifies problems, collects data, establishes facts, and draws valid conclusions. Solves practical problems and deals effectively with a variety of situations where only limited standardization exists. Interprets a variety of instructions in written, oral, diagram or schedule form. * Knowledge of applicable sanitary, infection control, and safety standards to be able to perform all assignments within the safety parameters. * Using OneSource as resource- knowledge to be able to assemble and wrap appropriate instruments, supplies, and equipment. * Knowledge of processes, procedures, quality assurance, chemicals, and medical instruments to be able to decontaminate and sterilize equipment, supplies, and instruments. * Must have good telephone manners and problem-solving skills. * Tactile differentiation, e.g. temperature, moisture. * Skill in cleaning specialized equipment Standard equipment includes: computer terminal, telephone, washer/decontaminator, sonic cleaner, sterilizer (steam and Sterrad), air compressor and biological incubator. Working Environment and Physical Activities: * Physical working environment may include, but not limited to, any of the following hazards: high pressure steam, chemical, electrical, mechanical, bio-waste, stress, back strain, body fluids, etc. * Environmental conditions may include, but not be limited to, variations in temperature, noise, odors, multi-stimuli, etc. * Ability to lift and move trays of instruments and patient care equipment (i.e., IV pumps, monitors, up to 25 lbs.) * OSHA BLOOD BORNE PATHOGEN EXPOSURE POTENTIAL: Level 1 - tasks involve possible exposure to blood, body fluids, or tissue; probability of exposure is a condition of employment. The function involves handling of both clean and soiled sharp instruments, needles, and cleaning chemicals; meticulous reassembly of fine surgical instrumentation Some danger of skin burns (steam burns); working with hot (270 degree F) metal objects; potential exposure to hazardous chemicals (Hydrogen Peroxide, Gluteraldehyde, etc.) and other potentially hazardous cleaning agents. Must observe and practice universal precautions. * The employee must regularly push loads up to 120 pounds and do repetitive loading/unloading of products up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. * Pressure from high volume census to meet deadlines to obtain adequate instrumentation from vendors. * Extensive person-to-person contact and interruptions. * While performing the duties of this job, the employee is required to constantly stand and walk. The employee frequently is required to stoop, crouch, and twist. The employee is occasionally required to kneel, squat, and sit. * The employee must be able to consistently support, push, pull, and/or lift up to 25 pounds. * Functional physical demands include manual dexterity and fine motor skills and reaching. The following senses will be needed for essential duties of the job: speech, vision, hearing, smell, and touch (i.e., tactile differentiation of temperature and moisture). * Have no physical limitations as to lifting trays of instruments (above the head), pushing, pulling carts from sterilizer, walking, and standing for duration of shift. Essential Duties and Responsibilities: * Operates all required equipment and machinery accurately and safely. Prepares, assembles, and sterilizes instruments and supplies according to parameters of sterilization in accordance with The Department of Health, TJC, OSHA, CDC, AAMI and AORN standards. * Maintains appropriate records, and monitors quality control and infection control standards. Provides asset management and support of surgical instruments and trays belonging to or consigned to the facility. * Accurately handles and cares for instruments appropriately, including appropriate selection of cleaning agents, lubricants, examination for function, identification, and assembly according to OneSource and preparation for sterilization. Retrieves malfunctioning instruments and ensures repairs are completed. * Correctly peel-packs supplies/instruments, wraps instruments for sterilization, inspect each instrument for use, function, completeness, and cleanliness. * Coordinates with Materials Dept to ensure facility sets are stocked to PAR levels. * Ensures safe care to patients, staff, and visitors; adheres to all FSC policies, procedures and standards and quality of service. * Promotes individual professional growth and development by meeting requirements for mandatory/continuing education and skills competency; supports department-based goals which contribute to the success of the organization; Communicate with operating room staff to provide required instruments. * Responsible for reporting damaged or malfunctioning equipment to Clinical Director and Material Manger and follow process for replacement. * Acts as a resource to nursing staff in all departments regarding responsibilities of proper sterilization techniques. * Clean, set up, sterilize, and distribute instruments as scheduled on each shift. * Maintains records for QA and sterilization. * Employees are expected to comply with all regulatory requirements, including Joint Commission Standards. * Is familiar with organization, department, and job specific Environment of Care areas, including Life Safety, Hazardous Materials Communications, Emergency Preparedness, Infection Control and Medical Equipment Failure. * Adheres to Standard Precautions as appropriate, which may include: the use of protective barriers, as appropriate (e.g., gloves, masks, gowns, pocket masks, and/or safety glasses); handling and disposing of infectious waste appropriately; and hand washing as appropriate. Minimum Requirements: * A High School diploma or equivalent and certification in sterile processing and distribution. * A clear background check and proof of up-to-date immunizations. * Must maintain minimum of 10 CEU'S per year by NYS Law. * Entry Level. Prefer 1-3 years' experience. Prefer prior Sterile Processing Department, Operating Room support and/or prior details-oriented assembly experience. * Must commit to achievement of certification by the Certification Board for Sterile Processing and Distribution (CBSPD) or the International Association of Healthcare Central Service Materiel Management (IAHCSMM) within 18 months of hire. * Strong attention to detail, vigilance, and meticulous care on the job. * Passion for keeping people safe. * Good judgment and critical-thinking skills. * Manual dexterity and the ability to handle fragile equipment. * Technical skills and familiarity with sterilization techniques. * The ability to work well in a team or independently. Thank you for your interest in Albany Medical Center! Albany Medical is an equal opportunity employer. This role may require access to information considered sensitive to Albany Medical Center, its patients, affiliates, and partners, including but not limited to HIPAA Protected Health Information and other information regulated by Federal and New York State statutes. Workforce members are expected to ensure that: Access to information is based on a "need to know" and is the minimum necessary to properly perform assigned duties. Use or disclosure shall not exceed the minimum amount of information needed to accomplish an intended purpose. Reasonable efforts, consistent with Albany Med Center policies and standards, shall be made to ensure that information is adequately protected from unauthorized access and modification.

This is where your work makes a difference. At Baxter, we believe every person-regardless of who they are or where they are from-deserves a chance to live a healthy life. It was our founding belief in 1931 and continues to be our guiding principle. We are redefining healthcare delivery to make a greater impact today, tomorrow, and beyond. Our Baxter colleagues are united by our Mission to Save and Sustain Lives. Together, our community is driven by a culture of courage, trust, and collaboration. Every individual is empowered to take ownership and make a meaningful impact. We strive for efficient and effective operations, and we hold each other accountable for delivering exceptional results. Here, you will find more than just a job-you will find purpose and pride. Your Role at Baxter This is where your creativity addresses challenges You are creative, thorough, and a heads-down do-er. You embrace a challenge and truly apply the collaborative powers of your team to produce great results. You are motivated by work that is never the same from one day to the next. As a Quality Technician, you are unafraid of navigating through necessary internal processes to facilitate a product you deeply believe in. You can absorb and act on complex procedures and data and train your team or peers if needed. You take pride in getting things done quickly without sacrificing safety or quality. Your Team at Baxter Within Quality, every role makes a difference. Products that Baxter makes are shipped worldwide for patients in need. Whether it's building a new process from scratch or facing a never-before-seen production hurdle, individuals within Quality are given the trust and opportunity to bring creativity to the table. Regardless of your specific role with a product, it is sure to touch a portion of our global operation. The mission of Baxter is to save and sustain lives. This mission is embedded into everything we do. This means if there is a decision to be made where quantity and quality are at odds, we will always choose quality. Our patients come first, always. The Quality function values both working together as a team and independently. We draw energy from working in a plant or an office where there are opportunities to collaborate. As the company evolves, so does the way our team approaches work as it strives to create top-of-the-line products. We build relationships with each other to get work done. Building these relationships is easy because we all share common traits of being reliable, ethical, and caring. We lean on our colleagues for their expertise and hold each other accountable. We feel empowered to speak up when there's a new insight or opportunity to improve something. This open dialog builds trust within the team and helps create a better product for our customers. You will be responsible for supporting various assignments supporting Baxter quality systems and ensuring label copy control, sample management, documentation review, Oversight floor shop activities, and other quality department functions. **This is a 2/2/3 night shift position, will work 12-hour shift from 6:00 pm - 6:30 am** What you'll be doing: Makes detailed observations, analyzes data, and interprets results. Maintains department equipment and inventory levels for controlled materials. Owns monthly inventory cycle count initiation and variance follow-up. Perform routine inspections as the provider of floor shop oversight, quality checks, and in-process product inspections of finishing product areas. Interacts with manufacturing and supervision to address quality process or batch-related concerns. Performs process compliance audits of all manufacturing areas to ensure quality of product/process (TIQs) is achieved. Performs troubleshooting, works independently, and makes decisions based on general guidance and existing procedural requirements. Performs product functional testing in support of equipment validations. Identifies process improvements and escalates to Line Operations Supervision and/or Management. Ability to work independently and as part of a team in a fast-paced environment. What you'll bring: The candidate must not be allergic to penicillin or cephalosporin drugs 6 months of experience in manufacturing/quality preferred. HS Diploma or equivalent is required. Basic science, math, and computer skills (including Microsoft Word and Excel) are required. Good writing, verbal communication, and problem-solving skills are required. Ability to work in a team environment and make independent decisions based on procedural and regulatory requirements It is desirable for the candidate to have experience with the requirements of current Good Manufacturing & Documentation Practices in pharma manufacturing facilities. The candidate must be able to work flexible hours in a dynamic environment with minimal direct supervision. Will work in both Drug Delivery and Penicillin facilities as needed. Overtime may be required to meet the production schedule. Must be able to work every other weekend. We understand compensation is an important factor as you consider the next step in your career. At Baxter, we are committed to equitable pay for all employees, and we strive to be more transparent with our pay practices. The estimated base salary for this position is $40,000 to $55,000 annually. The estimated range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on upon location, skills and expertise, experience, and other relevant factors. For questions about this, our pay philosophy, and available benefits, please speak to the recruiter if you decide to apply and are selected for an interview. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment visa at this time. US Benefits at Baxter (except for Puerto Rico) This is where your well-being matters. Baxter offers comprehensive compensation and benefits packages for eligible roles. Our health and well-being benefits include medical and dental coverage that start on day one, as well as insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance. Financial and retirement benefits include the Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount, and the 401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching. We also offer Flexible Spending Accounts, educational assistance programs, and time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave. Additional benefits include commuting benefits, the Employee Discount Program, the Employee Assistance Program (EAP), and childcare benefits. Join us and enjoy the competitive compensation and benefits we offer to our employees. For additional information regarding Baxter US Benefits, please speak with your recruiter or visit our Benefits site: Benefits | Baxter Equal Employment Opportunity Baxter is an equal opportunity employer. Baxter evaluates qualified applicants without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, protected veteran status, disability/handicap status or any other legally protected characteristic. Know Your Rights: Workplace Discrimination is Illegal Reasonable Accommodations Baxter is committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please click on the link here and let us know the nature of your request along with your contact information. Recruitment Fraud Notice Baxter has discovered incidents of employment scams, where fraudulent parties pose as Baxter employees, recruiters, or other agents, and engage with online job seekers in an attempt to steal personal and/or financial information. To learn how you can protect yourself, review our Recruitment Fraud Notice.

This is where your work makes a difference. At Baxter, we believe every person-regardless of who they are or where they are from-deserves a chance to live a healthy life. It was our founding belief in 1931 and continues to be our guiding principle. We are redefining healthcare delivery to make a greater impact today, tomorrow, and beyond. Our Baxter colleagues are united by our Mission to Save and Sustain Lives. Together, our community is driven by a culture of courage, trust, and collaboration. Every individual is empowered to take ownership and make a meaningful impact. We strive for efficient and effective operations, and we hold each other accountable for delivering exceptional results. Here, you will find more than just a job-you will find purpose and pride. Your role at Baxter The Quality Technician will primarily support Laboratory operations at the Round Lake Manufacturing facility in Round Lake, IL. This position encompasses testing support for pharmaceutical products (biologics and drugs) through all stages of the manufacturing process including incoming raw materials, in-process samples and finished product and includes facility environmental and critical systems monitoring. The shift for this position is a day shift 6am-6:30pm What you'll be doing Perform visual inspection testing on final products. Work under minimum supervision. Proactively and collaboratively connect with peers and management to ensure awareness of progress and issues; recommend solutions when issues arise. Use laboratory instrumentation and computer systems (i.e. LIMS) to collect and record data. Monitor inventory of supplies, equipment, and reagents; stock supplies as necessary. Perform routine preventative maintenance activities. Perform biohazardous waste disposal. Maintain a clean, safe and organized lab area and perform regular laboratory housekeeping activities. Maintain data integrity and ensure compliance with company SOPs and specifications, FDA, QSR and cGMP regulations. Follow, understand and align with Baxter SOP's and policies on cGMP's and safety. Contribute to other laboratory tasks and projects as assigned. Will work in both Drug Delivery and Penicillin facilities as needed. What you'll bring High School diploma/GED required & 2-3 years laboratory experience preferred. Must not be allergic to Penicillin, Cephalosporins, or their related products and /or materials. 20/20 vision with or without correction; Not be color blind. Ability to meet requirements for performing visual inspection activities. Excellent communication (oral and written) and interpersonal skills. Self-motivation, adaptability and a positive attitude in a highly dynamic environment. Occasional off-shift and weekend work required. Ability to lift up to 50 pounds when required. Ability to stand for long periods. Background knowledge in basic laboratory principles is preferred. We understand compensation is an important factor as you consider the next step in your career. At Baxter, we are committed to equitable pay for all employees, and we strive to be more transparent with our pay practices. The estimated base salary for this position is $40,000 - $55,000 annually. The estimated range is meant to reflect an anticipated salary range for the position. We may pay more or less than the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on upon location, skills and expertise, experience, and other relevant factors. For questions about this, our pay philosophy, and available benefits, please speak to the recruiter if you decide to apply and are selected for an interview. Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor or take over sponsorship of an employment visa at this time. US Benefits at Baxter (except for Puerto Rico) This is where your well-being matters. Baxter offers comprehensive compensation and benefits packages for eligible roles. Our health and well-being benefits include medical and dental coverage that start on day one, as well as insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance. Financial and retirement benefits include the Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount, and the 401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching. We also offer Flexible Spending Accounts, educational assistance programs, and time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave. Additional benefits include commuting benefits, the Employee Discount Program, the Employee Assistance Program (EAP), and childcare benefits. Join us and enjoy the competitive compensation and benefits we offer to our employees. For additional information regarding Baxter US Benefits, please speak with your recruiter or visit our Benefits site: Benefits | Baxter Equal Employment Opportunity Baxter is an equal opportunity employer. Baxter evaluates qualified applicants without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, protected veteran status, disability/handicap status or any other legally protected characteristic. Know Your Rights: Workplace Discrimination is Illegal Reasonable Accommodations Baxter is committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please click on the link here and let us know the nature of your request along with your contact information. Recruitment Fraud Notice Baxter has discovered incidents of employment scams, where fraudulent parties pose as Baxter employees, recruiters, or other agents, and engage with online job seekers in an attempt to steal personal and/or financial information. To learn how you can protect yourself, review our Recruitment Fraud Notice.

Duties and Responsibilities: Work effectively with the Quality, Operations, and R&D departments to perform all work accurately, with a sense of urgency and a positive attitude. Activities include the following: * In-Process and Final Device Inspection and Test: Support Manufacturing as the QC inspector for clean-room & packaging inspection activities. Perform and document in-process and final inspection/test of devices and sub-assemblies. Provide inspection/test assistance to R&D, Operations and Quality Engineering in support of design and process verification/validation activities. * Receiving Inspection and Test: Perform and document receiving inspection/test of device components & raw materials in accordance with drawings/specifications. Maintain accurate & timely records of inspection activities and recording such activities in the QC Receiving Log. * Non-Conforming Materials: Identify, segregate and quarantine non-conforming materials resulting from inspection activities. Initiate NCRs and notify the workstream owner in a timely manner. Execute and record disposition activities in accordance with approved NCRs. * Microbiological Monitoring: Participates in periodic microbiological and particulate testing of the cleanroom and products as required. * Returned Goods Authorization: Perform timely inspections and maintain accurate records of all returned TriSalus products through the RGA process. Correctly dispositions returned product as defined in approved procedures. * Quality Record maintenance: Receive, verify, scan and physically file Quality Records in an organized manner as needed. * Shipping QC: Verify TriSalus products and associated paperwork are accurate and complete prior to shipment. * Audit Assistance: Help retrieve, review, organize and re-file documentation during all TriSalus site audit activities (internal, FDA, ISO registrar). * GP Dynamics: Transfer released materials in the ERP software for material management as needed. * Training Record support: Enter complete training/certification records into the eQMS as needed. * General: Perform other quality inspection, test or administration activities as assigned. Qualifications Education & Certifications: * High School diploma. Advanced education or certifications a plus. Work Experience: * 2+ years of Quality Control / Inspection experience in a medical device or similar technical product manufacturing company. * Experience working with sterile disposable products in a cleanroom environment a plus. Knowledge, Skills & Abilities: * Able to read and interpret engineering drawings, specifications and detailed technical documents. * Able to read and follow quality procedures and detailed work instructions (QLPs/OPs). * Able to perform component and product inspection/testing using tools such as microscopes, calipers, micrometers, pin gauges, depth gauges, pull force test systems and vision measuring systems. (Sufficient knowledge to select and use the correct measurement tool for the required inspection accuracy. * Able to accurately document results of inspections using good documentation practices. * Able to understand and apply inspection sampling plans, such as C=0 or ANSI Z1.4. * Able to utilize basic math skills. * Able to use MS Word and MS Excel. * Must possess strong attention to detail. * Possess good communication skills and able to interact with peers in a professional manner. * Possess knowledge and application of US and international standards for quality management (FDA 21 CFR 820, ISO 13485). * Demonstrates excellent critical thinking skills. * Ability to adapt to and rapidly learn new processes. * Strong verbal and written communication skills and confidence in making inspection related decisions. * Participates as a member of cross functional technical teams to support process improvements, special projects and investigations as needed. * Approaches work tasks with a positive attitude and seeks feedback on performance to continually improve. Physical Requirements: * Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. * Must be able to lift and carry up to 30 lbs. * Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards.

Duties and Responsibilities: Work effectively with the Quality, Operations, and R&D departments to perform all work accurately, with a sense of urgency and a positive attitude. Activities include the following: In-Process and Final Device Inspection and Test: Support Manufacturing as the QC inspector for clean-room & packaging inspection activities. Perform and document in-process and final inspection/test of devices and sub-assemblies. Provide inspection/test assistance to R&D, Operations and Quality Engineering in support of design and process verification/validation activities. Receiving Inspection and Test: Perform and document receiving inspection/test of device components & raw materials in accordance with drawings/specifications. Maintain accurate & timely records of inspection activities and recording such activities in the QC Receiving Log. Non-Conforming Materials: Identify, segregate and quarantine non-conforming materials resulting from inspection activities. Initiate NCRs and notify the workstream owner in a timely manner. Execute and record disposition activities in accordance with approved NCRs. Microbiological Monitoring: Participates in periodic microbiological and particulate testing of the cleanroom and products as required. Returned Goods Authorization: Perform timely inspections and maintain accurate records of all returned TriSalus products through the RGA process. Correctly dispositions returned product as defined in approved procedures. Quality Record maintenance: Receive, verify, scan and physically file Quality Records in an organized manner as needed. Shipping QC: Verify TriSalus products and associated paperwork are accurate and complete prior to shipment. Audit Assistance: Help retrieve, review, organize and re-file documentation during all TriSalus site audit activities (internal, FDA, ISO registrar). GP Dynamics: Transfer released materials in the ERP software for material management as needed. Training Record support: Enter complete training/certification records into the eQMS as needed. General: Perform other quality inspection, test or administration activities as assigned. Qualifications Education & Certifications: High School diploma. Advanced education or certifications a plus. Work Experience: 2+ years of Quality Control / Inspection experience in a medical device or similar technical product manufacturing company. Experience working with sterile disposable products in a cleanroom environment a plus. Knowledge, Skills & Abilities: Able to read and interpret engineering drawings, specifications and detailed technical documents. Able to read and follow quality procedures and detailed work instructions (QLPs/OPs). Able to perform component and product inspection/testing using tools such as microscopes, calipers, micrometers, pin gauges, depth gauges, pull force test systems and vision measuring systems. (Sufficient knowledge to select and use the correct measurement tool for the required inspection accuracy. Able to accurately document results of inspections using good documentation practices. Able to understand and apply inspection sampling plans, such as C=0 or ANSI Z1.4. Able to utilize basic math skills. Able to use MS Word and MS Excel. Must possess strong attention to detail. Possess good communication skills and able to interact with peers in a professional manner. Possess knowledge and application of US and international standards for quality management (FDA 21 CFR 820, ISO 13485). Demonstrates excellent critical thinking skills. Ability to adapt to and rapidly learn new processes. Strong verbal and written communication skills and confidence in making inspection related decisions. Participates as a member of cross functional technical teams to support process improvements, special projects and investigations as needed. Approaches work tasks with a positive attitude and seeks feedback on performance to continually improve. Physical Requirements: Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Must be able to lift and carry up to 30 lbs. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards.

Duties and Responsibilities: Work effectively with the Quality, Operations, and R&D departments to perform all work accurately, with a sense of urgency and a positive attitude. Activities include the following: In-Process and Final Device Inspection and Test : Support Manufacturing as the QC inspector for clean-room & packaging inspection activities. Perform and document in-process and final inspection/test of devices and sub-assemblies. Provide inspection/test assistance to R&D, Operations and Quality Engineering in support of design and process verification/validation activities. Receiving Inspection and Test : Perform and document receiving inspection/test of device components & raw materials in accordance with drawings/specifications. Maintain accurate & timely records of inspection activities and recording such activities in the QC Receiving Log. Non-Conforming Materials : Identify, segregate and quarantine non-conforming materials resulting from inspection activities. Initiate NCRs and notify the workstream owner in a timely manner. Execute and record disposition activities in accordance with approved NCRs. Microbiological Monitoring : Participates in periodic microbiological and particulate testing of the cleanroom and products as required. Returned Goods Authorization : Perform timely inspections and maintain accurate records of all returned TriSalus products through the RGA process. Correctly dispositions returned product as defined in approved procedures. Quality Record maintenance : Receive, verify, scan and physically file Quality Records in an organized manner as needed. Shipping QC : Verify TriSalus products and associated paperwork are accurate and complete prior to shipment. Audit Assistance : Help retrieve, review, organize and re-file documentation during all TriSalus site audit activities (internal, FDA, ISO registrar). GP Dynamics : Transfer released materials in the ERP software for material management as needed. Training Record support : Enter complete training/certification records into the eQMS as needed. General : Perform other quality inspection, test or administration activities as assigned. Qualifications Education & Certifications: High School diploma. Advanced education or certifications a plus. Work Experience: 2+ years of Quality Control / Inspection experience in a medical device or similar technical product manufacturing company. Experience working with sterile disposable products in a cleanroom environment a plus. Knowledge, Skills & Abilities: Able to read and interpret engineering drawings, specifications and detailed technical documents. Able to read and follow quality procedures and detailed work instructions (QLPs/OPs). Able to perform component and product inspection/testing using tools such as microscopes, calipers, micrometers, pin gauges, depth gauges, pull force test systems and vision measuring systems. (Sufficient knowledge to select and use the correct measurement tool for the required inspection accuracy. Able to accurately document results of inspections using good documentation practices. Able to understand and apply inspection sampling plans, such as C=0 or ANSI Z1.4. Able to utilize basic math skills. Able to use MS Word and MS Excel. Must possess strong attention to detail. Possess good communication skills and able to interact with peers in a professional manner. Possess knowledge and application of US and international standards for quality management (FDA 21 CFR 820, ISO 13485). Demonstrates excellent critical thinking skills. Ability to adapt to and rapidly learn new processes. Strong verbal and written communication skills and confidence in making inspection related decisions. Participates as a member of cross functional technical teams to support process improvements, special projects and investigations as needed. Approaches work tasks with a positive attitude and seeks feedback on performance to continually improve. Physical Requirements: Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Must be able to lift and carry up to 30 lbs. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards.