Phlebotomy services technician jobs near me

- 1,064 jobs

Semiconductor Field Service Technician III
Canon U.S.A., Inc. 4.6
Phlebotomy services technician job in Manassas, VA
US-VA-Manassas Type: Full-Time # of Openings: 1 Additional Locations|CUS About the Role Are you seeking an opportunity to work with today's most advanced thin film processing tools? Anelva tools have been delivering cutting edge performance in thin films deposition (PVD) and enabling our customers to manufacture the most advanced hard disks and volatile memories/nonvolatile memories. We have an exciting opportunity in Manassas, VA to directly interface with customers to support their Anelva equipment in the field, which includes installations, preventive maintenance, troubleshooting, and repairs. The Semiconductor Field Service Technician III (Technician, Engineering III) performs technical support of high vacuum PVD equipment and related robotics. The individual must understand and have experience with vacuum technology, general practices, and procedures in the semiconductor industry and successfully perform field service duties in customer's clean room. Position provides on-site and on-call technical support, which may require off shift work. This position will require travel to Japan for the first 3-6 months for training. This position requires full-time presence at your assigned office(s)/worksite(s)/territory. Your Impact Responsible to monitor, inspect, setup, calibrate, and maintain semiconductor process equipment in the field to prevent equipment down time Troubleshoot hardware and software related issues and implement solutions Collect data for software related issues and discuss with headquarters in Japan Accurately document all maintenance activity and provide field service reports Install equipment control software and maintain record of software revision history Participate in the installation of equipment at customers' sites Monitor stock level of service parts and equipment to ensure adequate inventory is available for repair work Provide training and assistance to customer engineering team Effectively communicate with customers, Canon USA and Canon-Anelva Japan employees, Escalate serious or complicated repair problems to senior level team members About You: The Skills & Expertise You Bring Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19 HS diploma, GED or equivalent experience required plus 2-4 years of relaed experience Minimu of 2 years of experience working on vacuum equipment preferred. Multi chamber cluster systems and robotics experience are highly preferred Ability to understand electrical and mechanical drawings to troubleshoot problems. Experience with PLC and other software applications is a plus Ability to work independently following initial training and 3-6 months of on-the-job training Must have analytical skills for problem analysis and resolution Decide on problem solving road map and follow methodical means to resolution Decide and recommend spare and consumable parts for PM's and repairs Job will require international travel for training Domestic and international travel required (must have up-to-date travel documents). Valid driver's license and acceptable driving record necessary. Additionally, because this position requires driving for company business as an essential function of the job, must remain in compliance with company safety guidelines and policies Position may require ability to work flexible shifts Requires ability to lift approx. 50 lbs. Bilingual Communication skills helpful but not required. (Japanese/English) Substantial amount of standing, walking, typing, grasping, talking and hearing. Occasionally kneeling, crouching, stooping, reaching, pushing, pulling and climbing stairs or ladder. The worker is required to have close visual acuity with or without corrective lenses for extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Working primarily in a cleanroom environment (wearing full clean room suit, facemask, gloves, safety glasses) The work Environment may include a variety of physical conditions such as proximity to moving mechanical parts, electrical current, working on scaffolding and high places, exposure to chemicals, ultraviolet light and lasers, working in enclosed spaces, close quarters, narrow aisles or passageways. The work environment may include working in highly time sensitive situations requiring quick resolution including equipment problems. We are providing the anticipated rate for this role: $33.37 - $49.98 hourly Company Overview About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at ***************** and connect with us on LinkedIn at ****************************************** Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer Youll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -Dress for Your Day attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you cant get anywhere else Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at https://*****************/about-us/life-at-canon/benefits-and-compensation We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers site https://*****************/about-us/life-at-canon, we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at https://*****************/about-us/life-at-canon. #CUSA Posting Tags #PM19 #LI-NF1 #LI-ONSITE PI87f7473a7bc8-37***********2
$33.4-50 hourly 2d ago
HQA Regional Training and Service Technician, Fleet - IAD
Swissport International AG
Phlebotomy services technician job in Sterling, VA
Are you ready to take flight in a dynamic and fast-paced aviation industry? As a global leader in aviation services, Swissport provides G round H andling, C argo H andling, and P assenger S ervices to over 300 million passengers annually. Our mission is simple - "To provide the aviation industry with consistent and tailor-made solutions around the globe, for a better customer experience." W e believe that our people are what differentiates us from our competition. At Swissport, we are driven by our core values of Show Y ou C are, Do the Ri ght T hing s and Win as a T eam, and w e are currently seeking dedicated individuals, who align with these values, to join our team at various locations across the globe. Locations: Regional - Proximity to one of these major markets IAD, JFK, MIA, ORD, PHX, SEA & SFO. Reporting To: Regional Training and Service Manager, Fleet Job Summary The Traveling GSE Technician - Technical Trainer is responsible for performing advanced maintenance and repair of Ground Support Equipment (GSE) across multiple Swissport stations. This individual will travel frequently to support local maintenance teams, perform diagnostics and repairs, ensure fleet reliability, and train local technicians in best practices and new technologies. The role is hands-on and highly mobile, intended for a seasoned technician who excels in the field and is passionate about developing the next generation of Swissport technicians. The expected pay rate is up to $93,600/yr. Full-time employees are offered a range of health and wellness benefits as well as 401(k) with company match paid vacation time, sick time, and company paid holidays. Key Responsibilities Travel to various Swissport stations across the U.S. and Canada to conduct maintenance, diagnostics, and emergency repairs on GSE assets. Serve as a technical subject matter expert while on assignment-coaching, mentoring, and training local Swissport technicians. Lead hands-on training in diagnosing, servicing, and maintaining gas, diesel, electric, and hydraulic-powered GSE, including loaders, pushbacks, belt loaders, GPU/ASU units, and deicers. Perform preventive maintenance and overhauls per established schedules and procedures. Diagnose and repair powerplant, drivetrain, brake, electrical, hydraulic, and HVAC systems. Respond to emergency GSE breakdowns at remote locations and perform on-call maintenance as needed. Complete and ensure accuracy of all maintenance documentation in Maximo and other systems per Swissport, airport authority, and regulatory standards. Inspect GSE for safety compliance and quality control; recommend adjustments or improvements as needed. Retrieve, order, and manage repair parts as necessary while onsite. Uphold Swissport's standards in safety, quality, and professionalism while representing the brand at different stations. Serve as a liaison between GSE operations and station management to ensure operational readiness. Support station start-ups, fleet upgrades, and new technician onboarding as required. Keep accurate travel records, training logs, and station feedback for internal reporting and performance tracking. Other duties and tasks, as assigned. Qualifications and Competencies Valid driver's license with clean driving record. Certification in one of the following trades: Heavy Duty, Commercial Vehicle, or Automotive Mechanic (must be in good standing). Minimum 3-5 years of experience maintaining and repairing GSE or similar equipment. Ability and willingness to travel up to 75% of the time, including air travel and short-notice deployments. Strong technical training, coaching, or leadership experience preferred. Familiarity with maintenance management systems (e.g., Maximo). Competence in Microsoft Office and mobile diagnostics tools. Excellent troubleshooting and communication skills. Able to lift up to 50 pounds and work in varied outdoor conditions, including extreme cold and heat. Travel Willing to travel when necessary for training and service needs or to assist other SP stations with GSE needs as required The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit and talk or hear. The employee is occasionally required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, and ability to adjust focus. What we offer 401(k) Dental insurance Health insurance Life insurance Paid time off Retirement plan Tuition reimbursement Vision insurance Equal Employment Opportunity Statement Swissport as an equal opportunity employer bases its hiring decisions on the business need and the best qualified candidates available and does not discriminate in its employment decisions on the basis of any protected category. Candidates who are offered employment may be subject to a criminal record and other background checks as permitted or required by company policy or applicable law.
$93.6k yearly 6h ago
Field Service Technician
R.A Jones, a Coesia Company 3.9
Remote phlebotomy services technician job
About R.A. Jones and Coesia R.A Jones, headquartered in Covington, KY, is a global leader in the design and manufacturing of primary and secondary packaging machinery for the beverage, chemicals, food, pharma & healthcare, and industrial goods industries. R.A Jones offers an extensive portfolio of solutions for applications in aerosol filling, cartoning and box filling, chub packing, cup filling, pouching and modified atmosphere packaging. R.A Jones is part of Coesia, a group of innovation-based industrial and packaging solutions companies operating globally, headquartered in Bologna, Italy. Coesia has operating units in 36 countries, a turnover of 2,015 million euros in 2022 and over 8,000 employees. About the Role We are seeking highly skilled electro-mechanical individuals who will be able to perform on-site and telephone support, training, and repair service for R.A Jones customers.This individual will perform field service functions for manufactured equipment and any equipment sold with a warranty. Service work may include, but not limited to, troubleshooting electrical and mechanical systems, PLC programming, wiring, circuit analysis, routine maintenance, repairs, modifications, machine setup, or training of customer personnel. What You Need to Be Successful Proficient in field service for major food and filling machines with a strong working knowledge of electrical and mechanical systems. Diagnose and repair electrical control systems, including PLCs, HMIs, and motor control circuits. Install and configure sensors, actuators, and other electrical components as required. Start-up of machines in customer plants, ensuring all electro-mechanical components are properly configured. Training customer personnel to properly operate and maintain machines with an emphasis on electrical troubleshooting and system integration. Assistance to customers when there is an electrical or mechanical breakdown. Performance of contracted or periodic maintenance of machines, including electrical diagnostics and calibration. Attainment of a working knowledge of all assigned equipment in the field. Customer check-out demonstrations at Packaging Technologies prior to machine shipments. Train customer personnel to properly operate and maintain equipment (Formal & Informal). Contact customers to maintain service and equipment needs. Assists parts department in determining part numbers as needed by customer. Advises customers of the latest electrical upgrades for their machines, including preventative maintenance programs and training opportunities. Assist with customers for assistance with technical troubleshooting involving electrical and mechanical systems. Support training for new service personnel, focusing on electrical troubleshooting skills. Recommend equipment changes to engineering and represent customer service and engineering departments in the field. Performs all other duties as assigned. What You Need to Be Successful Strong understanding of electrical systems, PLC programming, and troubleshooting with excellent communication and teamwork skills. Customer-focused problem solver with a proactive and adaptable mindset. Technical training in electro-mechanical technology or relevant experience. Proficiency in electrical and mechanical equipment, Microsoft Office, and effective communication. Ability to travel extensively (75-80%) in the U.S. and internationally on short notice. Our Offer Coesia North America offers a competitive benefit package which includes, among other things: 401K offering 6% company match with no vesting period. Flexible remote work offering. 8-weeks paid parental leave. Multiple health benefit & insurance options. PTO, sick time, and 12 observed calendar holidays. Company paid short-term disability (80% wager placement) & long-term disability. HSA company contribution for individual & employer family coverage. Coesia is an equal opportunity employer and embraces diversity and inclusion.
$45k-67k yearly est. 1d ago
Field Service Technician
Cornerstone Technology Talent Services 3.2
Phlebotomy services technician job in Gainesville, VA
We are seeking Site Access & Compliance Support Technicians to provide on-site workforce support at a mission-critical data center construction project in Gainesville, VA. This is a Level 1 field role focused on daily site operations, access management, compliance checks, and first-line technical troubleshooting. Technicians will assist workers and subcontractors with site entry, credentialing, and onboarding while ensuring compliance requirements are met. This role requires a strong customer service mindset, attention to detail, and the ability to follow structured procedures in a fast-paced environment. Key Responsibilities Access Control & Compliance Monitor gates, turnstiles, and access points to ensure only authorized personnel enter. Verify worker credentials, badges, and compliance documentation. Issue and manage temporary badges and visitor passes. Report irregularities or noncompliance to site supervisors. Worker Onboarding & Assistance Guide workers and subcontractors through the digital onboarding process. Assist with account setup, documentation upload, and system login. Provide clear instructions on mobile check-ins, digital badges, and QR codes. Support multilingual onboarding as needed (tools/resources provided). First-Line Technical Support Serve as the first point of contact for access or credentialing issues. Troubleshoot basic technical problems (e.g., badge not scanning, login errors). Escalate more complex issues to centralized support following standard procedures. Maintain accurate records of support requests and resolutions. Customer Service & Communication Deliver professional, courteous assistance to workers and site staff. Communicate clearly and calmly when resolving issues. Relay feedback to supervisors to support process improvements. Performance Expectations Ensure smooth and timely worker access. Minimize delays by resolving issues efficiently. Maintain accuracy in compliance and credential checks. Provide a consistently positive support experience on site. Key Qualifications High school diploma or equivalent (some college or technical training preferred). Prior experience in field support, help desk, IT support, or site operations is a plus. Basic technical troubleshooting skills (hardware/software). Strong attention to detail and ability to follow structured protocols. Excellent communication and interpersonal skills. Ability to stand/walk for extended periods and work outdoors at site access points.
$57k-77k yearly est. 3d ago
Remote Financial Services
Rainmakers Inc. 3.7
Remote phlebotomy services technician job
NOW HIRING Remote Financial Specialists No Experience Needed Paid Training Work From Home We're looking for motivated go-getters ready to earn financial independence while making a real impact helping families. What We Offer: -Paid training + licensing (Life, Investments, Mortgage) -100% Remote Flexible part-time or full-time -No quotas or income caps -11 streams of residual income + stock opportunities -Growth path to brokerage ownership Perfect For: Stay-at-home professionals Career changers Ambitious entrepreneurs Requirements: 18+ (Federal requirement) No felonies (background check) U.S.-based, with internet access Self-motivated, trustworthy, goal-driven Reach out now to schedule a zoom interview!
$42k-71k yearly est. 60d+ ago
Construction Services Field Representative
CLH Design, P.A
Remote phlebotomy services technician job
Do you enjoy being in the field and watching projects come to life? Then our Construction Services Field Representative at CLH design is the position for you. The ideal candidate will have demonstrated project experience within the construction industry and have knowledge of site design principles. The candidate can expect to work on a broad range of public sector projects including K-12 and higher education campuses, various municipal/community service facilities and parks. CLH design is a diverse, collaborative firm with young and young at heart professionals who thrive in our collaborative, team-oriented environment. To accommodate the varying needs of our employees, we offer a flexible work environment with the capability for employees to work from home part-time. Required Qualifications: Minimum education of high school graduate, GED or technical college graduate. Bachelor's Degree in Civil Engineering, Construction Administration, or a related field from an accredited college/university preferred. Excellent written and oral communication skills. Highly motivated to successfully interact with clients and team members. Self-directed and able to work independently with minimal supervision. Strong experience in the construction industry with construction management/administration training preferred. Must be able to pass a background check and be legally able to work in the United States of America. Must have a valid Driver's License. Duties and Responsibilities: Review shop drawings and product submittal data. Observe construction and generate written field reports. Generate written punch-list inspections. Review pay applications, RFI's and change proposals. Generate correspondence to contractors, clients and team members. Maintain active communication with contractors, clients and team members for any construction related issues. Ability to generate plan revisions and bulletin drawings using AutoCAD. Knowledge, Skills and Abilities: Knowledge of site design principles and construction practices. Knowledge of current codes and regulatory standards governing the state's building construction industry. Ability to understand and follow written and oral instructions. Ability to read and interpret engineering plans and specifications. Ability to read, update and maintain various records and files. Ability to access, operate and maintain various software applications. Ability to clearly communicate information both verbally and in writing. Skill in operating various specialized software and office equipment, e.g., large format plotters, AutoCAD, Microsoft Office/Excel. Ability to establish and maintain effective working relationships with contractors, clients, and team members. CLH was established in 1993 and specializes in collaborative civil engineering and landscape architecture. We have 26 employees who consist of civil engineers, landscape architects, construction administrators and support staff. We offer an attractive salary/benefits package, including medical, dental, life and Simple IRA with company match, learning opportunities and much more.
$39k-60k yearly est. 5d ago
Service Technician - Baltimore-Washington
Aramark 4.3
Phlebotomy services technician job in Jessup, MD
The Service Technician is responsible for repairing and reconditioning equipment in the profit center and/or customer locations. Responsible for installation of equipment for customer accounts and is responsible for diagnostics of mechanical, electrical, and plumbing problems and takes corrective action. Provides customer assistance in resolving customer questions, problems, or complaints regarding equipment. Long Description COMPENSATION: The Hourly rate for this position is $27.65 to $28.65. If both numbers are the same, that is the amount that Aramark expects to offer. This is Aramark?s good faith and reasonable estimate of the compensation for this position as of the time of posting. BENEFITS: Aramark offers comprehensive benefit programs and services for eligible employees including medical, dental, vision, and work/life resources. Additional benefits may include retirement savings plans like 401(k) and paid days off such as parental leave and disability coverage. Benefits vary by location and are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works. For more information about Aramark benefits, click here Aramark Careers - Benefits & Compensation There is no predetermined application window for this position, the position will close once a qualified candidate is selected. Qualified applicants with arrest or conviction records will be considered for employment in accordance with all applicable laws, including, but not limited to all applicable Fair Chance Ordinances and Acts. For jobs in San Francisco, this includes the San Francisco Fair Chance Ordinance. Job Responsibilities ? Calls on customers as assigned by Service Manager or General Manager to investigate operating difficulties of equipment. Diagnoses problems and figures out reasons and the nature of correction. ? Makes repairs or adjustments to equipment to return the equipment in working order. ? Cleans and maintains equipment on location including exchanging decanters and cleaning brewers. ? Documentation including verification of the closing calls, invoice completion, asset verification and any required customer documentation ? Repairs and refurbishes equipment; maintain spare parts levels. ? Ability to accurately collect work completed in company provided mobile device. ? Maintains a good working relationship and liaison with customers to maintain a positive image of the company and product. ? Perform scheduled and unscheduled service activities including emergency service calls, preventative maintenance, surveys, and installations. ? Maintains service area and vehicle in a clean and organized condition. Follows company guidelines on safety and operates vehicle in a safe manner. ? Completes weekly Driver Report and follows guidelines in the Fleet Manual. ? Follows all safety standards and policies set by manufacturers and company. At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. Qualifications ? High School Diploma or GED required ? Solid understanding in repairing small electrical appliances. ? Must be willing to learn how to connect equipment to water sources, add additional lines and drainage when vital. ? Must be willing to learn how to work with copper, braided and pex lines. This skill is normally developed through six months to one year of experience in the equipment service operations or through vocational training. ? The ability to read and write in English is required. ? Must also possess effective communication and customer service skills. ? Incumbent must have an acceptable driving record and a qualified driver?s license. This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking & standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). EducationAbout Aramark Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at or connect with us on Facebook, Instagram and Twitter.
$27.7-28.7 hourly 11d ago
Equipment Service Technician
Sheetz, Inc. 4.2
Phlebotomy services technician job in Bealeton, VA
Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers. We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few: Lennox Bev-Air York Gilbarco Veeder-Root True Captive Air Hil Phoenix Lancer NCR Amana Bunn We pride ourselves on providing one of the best benefit packages around, including: 3 weeks Paid Time Off (after first 30 days of employment) Medical/ Dental/ Vision Quarterly Bonus 401K & Employee Stock Ownership Uniform & Boot Allowance Company Provided Tools & Supplies Career Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working order Troubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage. Complete scheduled and assigned preventative maintenance of all store equipment. Complete scheduled and assigned washing and cleaning of store's windows. Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance. Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines. Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts. Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law. Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle. All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered) Education • High School Diploma/GED required • Technical / Trade training / Sheetz training required Experience • No experience required with skilled trade or apprenticeship completion certificate • Minimum 2-year hands-on training experience in HVAC, electrical, mechanical or a related trade required without a skilled trade or apprenticeship certificate required. Licenses/Certifications • Valid Driver's license required • Universal 608 EPA certification preferred or the successful obtainment in timeframe defined by management Tools & Equipment • General Office Equipment • Hand tools (hammer, measuring devices, wrench, level, etc.) • Power Hand tools (saws, drill press, grinders, sanders, etc.) • Pneumatic tools (compressor, nailer, stapler, jack hammer, etc.) • Welding tools (torch, plasma cutter, welder, etc.) • Landscaping tools (chain saw, leaf blower, weed eater, etc.) • Motorized Equipment (generators, pressure washer, fork lift, etc.) • HVAC gauges, specialized equipment Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.
$32k-44k yearly est. 6h ago
Digital Services Technical Lead
Peraton 3.2
Remote phlebotomy services technician job
Responsibilities We're seeking a seasoned Digital Services Technical Lead to champion modern software delivery practices through DevSecOps methodology, guide incident resolution, and lead strategic technical improvements across a large-scale AWS-based enterprise environment. This role blends hands-on technical leadership with strategic direction. You'll oversee high-impact software delivery initiatives, orchestrate critical incident responses, and influence a wide network of engineering teams to drive continuous improvement. The Ideal Candidate must be a strategic thinker and technical executor with a passion for reducing downtime, automating solutions, and building resilient, secure digital services, thrives in high-pressure environments, bring structure to chaos, and unite teams around common goals. What will you do: Lead the maturity and implementation of modern DevSecOps practices across software development and delivery teams. Direct and manage the real-time resolution of critical incidents, coordinating multi-disciplinary teams and communicating with executive stakeholders. Conduct detailed root cause analysis and establish proactive technical solutions to avoid recurrence. Drive improvements to monitoring, alerting, automation, and incident response tooling. Serve as the primary liaison between software engineers, SREs, security teams, and business stakeholders during technical events. Facilitate post-incident reviews and lead efforts to integrate learnings into operational processes and tooling. Collaborate on building and evolving CI/CD pipelines, security controls, and delivery automation using GitLab, Terraform, and Kubernetes (EKS). Ensure reliability, performance, and security standards are maintained across infrastructure and application layers. Support Agile teams by integrating DevSecOps best practices into sprint cycles. Qualifications Required Qualifications: Bachelor's degree and 8 years of experience. Additional 4 years of experience maybe accepted in lieu of the degree. 8 years of experience in cloud-native application delivery, AWS, networking, and infrastructure automation. Expert-level knowledge of DevSecOps practices, including CI/CD automation, secure coding, and IaC using Terraform. Real-world experience resolving critical outages and leading root cause analysis efforts. Strong hands-on experience with AWS services (CloudWatch, IAM, OpenSearch), container orchestration (EKS), and security tools (e.g., Aqua, DLP). Proficient in at least one programming/scripting language (Python, Java, PowerShell, etc.). Experience with GitLab CI/CD including environment management, feature flags, and DORA Metrics reporting. Demonstrated ability to lead cross-functional technical teams under pressure. Familiarity with monitoring and observability platforms like Datadog. Excellent communication skills, including executive-level incident briefings and technical documentation. Must be a US Citizen. Must be able to obtain and maintain a Public Trust clearance. Preferred Qualifications: AWS Certified Solutions Architect - Professional AWS Certified Security - Specialty Peraton Overview Peraton is a next-generation national security company that drives missions of consequence spanning the globe and extending to the farthest reaches of the galaxy. As the world's leading mission capability integrator and transformative enterprise IT provider, we deliver trusted, highly differentiated solutions and technologies to protect our nation and allies. Peraton operates at the critical nexus between traditional and nontraditional threats across all domains: land, sea, space, air, and cyberspace. The company serves as a valued partner to essential government agencies and supports every branch of the U.S. armed forces. Each day, our employees do the can't be done by solving the most daunting challenges facing our customers. Visit peraton.com to learn how we're keeping people around the world safe and secure. Target Salary Range $112,000 - $179,000. This represents the typical salary range for this position. Salary is determined by various factors, including but not limited to, the scope and responsibilities of the position, the individual's experience, education, knowledge, skills, and competencies, as well as geographic location and business and contract considerations. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. EEO EEO: Equal opportunity employer, including disability and protected veterans, or other characteristics protected by law.
$112k-179k yearly Auto-Apply 1d ago
Service Tech Team Lead - Environmental Services - FT - Day
Stormont Vail Health 4.6
Remote phlebotomy services technician job
Full time Shift: First Shift (Days - Less than 12 hours per shift) (United States of America) Hours per week: 40 Job Information Exemption Status: Non-Exempt Services Technician Team Leads perform a wide range of duties internally to ensure the ongoing operation of the organization. In the absence of the supervisor the team lead takes on the responsibility for the entire shift. Education Qualifications High School Diploma / GED Preferred Experience Qualifications 1 year Service department experience. Required Experience working in a hospital. Preferred Skills and Abilities Good working rapport with staff and peers. (Required proficiency) Demonstrated ability to be self-disciplined. (Required proficiency) Willingness to perform routine, repetitive cleaning tasks. (Required proficiency) Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. (Required proficiency) Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. (Required proficiency) Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. (Required proficiency) What you will do Makes periodic inspections of assigned areas to see that employee is following procedures. Checks quality of work performed by employees. Takes responsibility of entire shift in the absence of Supervisor-include answering pages and assigning work as required. Dilutes chemicals properly. Keeps equipment clean and maintained. Handles hazardous waste properly. Performs cleaning duties as required. Proper usage of supplies. Maintains flexibility to meet needs and requests. Operates battery powered machines as required. Strips and refinishes floors as necessary. Assist in the training of any new or existing employees. Performs meeting setups as requested. Demonstrates knowledge of and implement actions according to Medical Center policies and procedures. Reports to work on time. Dress appropriately according to the established dress code and maintains personal hygiene. Organizes daily routine and duties. Communicates appropriately with Management Staff. Required for All Jobs Complies with all policies, standards, mandatory training and requirements of Stormont Vail Health Performs other duties as assigned Patient Facing Options Position is Patient Facing Remote Work Guidelines Workspace is a quiet and distraction-free allowing the ability to comply with all security and privacy standards. Stable access to electricity and a minimum of 25mb upload and internet speed. Dedicate full attention to the job duties and communication with others during working hours. Adhere to break and attendance schedules agreed upon with supervisor. Abide by Stormont Vail's Remote Worker Policy and will review and acknowledge the Remote Work Agreement annually. Remote Work Capability On-Site; No Remote Scope No Supervisory Responsibility No Budget Responsibility No Budget Responsibility Physical Demands Balancing: Occasionally 1-3 Hours Carrying: Frequently 3-5 Hours Climbing (Ladders): Occasionally 1-3 Hours Climbing (Stairs): Occasionally 1-3 Hours Crawling: Occasionally 1-3 Hours Crouching: Rarely less than 1 hour Driving (Automatic): Rarely less than 1 hour Driving (Standard): Rarely less than 1 hour Eye/Hand/Foot Coordination: Frequently 3-5 Hours Feeling: Frequently 3-5 Hours Grasping (Fine Motor): Frequently 3-5 Hours Grasping (Gross Hand): Frequently 3-5 Hours Handling: Frequently 3-5 Hours Hearing: Occasionally 1-3 Hours Kneeling: Occasionally 1-3 Hours Lifting: Frequently 3-5 Hours up to 50 lbs Operate Foot Controls: Occasionally 1-3 Hours Pulling: Occasionally 1-3 Hours up to 50 lbs Pushing: Occasionally 1-3 Hours up to 50 lbs Reaching (Forward): Occasionally 1-3 Hours up to 50 lbs Reaching (Overhead): Occasionally 1-3 Hours up to 50 lbs Repetitive Motions: Frequently 3-5 Hours Sitting: Rarely less than 1 hour Standing: Occasionally 1-3 Hours Stooping: Occasionally 1-3 Hours Talking: Occasionally 1-3 Hours Walking: Frequently 3-5 Hours Physical Demand Comments: Incumbent may drive between facility locations for delivery and pick-up. May need to push or pull up carts with materials up to 200 pounds. Working Conditions Burn: Occasionally 1-3 Hours Chemical: Occasionally 1-3 Hours Combative Patients: Occasionally 1-3 Hours Dusts: Occasionally 1-3 Hours Electrical: Occasionally 1-3 Hours Explosive: Rarely less than 1 hour Extreme Temperatures: Occasionally 1-3 Hours Infectious Diseases: Occasionally 1-3 Hours Mechanical: Occasionally 1-3 Hours Needle Stick: Occasionally 1-3 Hours Noise/Sounds: Frequently 3-5 Hours Other Atmospheric Conditions: Occasionally 1-3 Hours Poor Ventilation, Fumes and/or Gases: Occasionally 1-3 Hours Radiant Energy: Rarely less than 1 hour Risk of Exposure to Blood and Body Fluids: Occasionally 1-3 Hours Risk of Exposure to Hazardous Drugs: Rarely less than 1 hour Hazards (other): Rarely less than 1 hour Vibration: Occasionally 1-3 Hours Wet and/or Humid: Occasionally 1-3 Hours Stormont Vail is an equal opportunity employer and adheres to the philosophy and practice of providing equal opportunities for all employees and prospective employees, without regard to the following classifications: race, color, ethnicity, sex, sexual orientation, gender identity and expression, religion, national origin, citizenship, age, marital status, uniformed service, disability or genetic information. This applies to all aspects of employment practices including hiring, firing, pay, benefits, promotions, lateral movements, job training, and any other terms or conditions of employment. Retaliation is prohibited against any person who files a claim of discrimination, participates in a discrimination investigation, or otherwise opposes an unlawful employment act based upon the above classifications.
$91k-136k yearly est. Auto-Apply 1d ago
Technical Service Lead - Remote Support
Mendaera, Inc.
Remote phlebotomy services technician job
Mendaera is developing technology that will enable all healthcare providers to do more for their patients. Our platform combines real-time imaging, robotics, and artificial intelligence to make precise and consistent intervention more accessible. Our aim is to eliminate barriers in the patient journey, accelerate recovery, delight customers, and reduce cost of care. We are seeking a highly skilled and customer-focused Technical Service Lead to build and scale our remote technical and clinical support function for a next-generation robotic medical device platform. In this critical, customer-facing role, the Technical Service Lead will deliver exceptional world-class remote support to healthcare providers and internal field teams. The ideal candidate will have strong technical knowledge of complex capital equipment, a passion for improving customer outcomes, and a vision and ability to innovate and scale support delivery through cutting-edge technologies. The annual salary range for this role is $130,000 to - $141,500. About You We are seeking candidates who thrive in fast-paced environments, embrace ambiguity, can create work products from scratch, possess critical thinking skills, and are detail-oriented. Responsibilities Technical & Clinical Support Leadership Serve as the primary escalation point for complex technical and clinical issues that arise during the installation, training, or use of the robotic system. Ensure timely, high-quality support through phone, video, and remote access tools. Develop and standardize workflows for issue triage, escalation, and resolution processes Maintain documentation of support cases and ensure knowledge base content is regularly updated. Develop and maintain servicing procedures, service bulletins, risk assessment documents, training materials, and knowledge base articles. Provide technical guidance to Mendaera field support teams to expedite onsite issue resolution. Support Strategy & Process Innovation Design and implement a scalable remote support model that meets customer base and business needs. Define track, and optimize key performance metrics like resolution time, first-call fix rate, and NPS. Identify and implement tools for remote diagnostics and predictive service delivery. Leverage customer data analytics to identify trends and prevent recurring issues. Evaluate and recommend AI or automation solutions to improve support efficiency. Cross-Functional Collaboration Partner with Product Management, R&D, and Field Service for serviceability improvements and supportability. Define serviceability requirements, negotiate, and influence stakeholders to prioritize and develop servicing tools and applications. Collaborate on remote monitoring and alerting capabilities. Provide customer feedback to drive continuous product and process improvements. Participate in design reviews and post-market surveillance activities. Support product validation and field beta programs in support of service readiness. Collaborate with the Operations team on demand planning and forecast FRU needs. Support Mendaera's field hardware and software deployment strategies, ensuring service readiness deliverables are met. Team Leadership & Customer Advocacy Lead and support remote support specialists, fostering a culture of responsiveness and technical and clinical insight. Own customer satisfaction KPIs tied to remote support and ensure high-quality service delivery. Mentor team members and contribute to onboarding, training, and professional development programs. Actively engage with customers to understand evolving needs and shape support offerings. Qualifications & Requirements Required: Bachelor's degree in Engineering, Biomedical, or related field. 5+ years in medical device service and support with capital equipment. Proven remote issue resolution experience and troubleshooting for complex hardware and software products. Self-motivated and proactive with a passion for quality and continuous improvement. Familiarity with FDA and ISO 13485 quality management standards. Strong troubleshooting and communication skills. Preferred: Experience leading/scaling remote support teams. Relevant Clinical experience, including but not limited to understanding basic anatomy and physiology. Experience in CRM and remote platform expertise (Salesforce, Zendesk, etc.). Experience with project management tools (Jira, Confluence, etc.). ERP experience (SAP, Oracle, etc.). Experience working in a startup or high-growth company environment. Understanding of cybersecurity for connected devices. The ideal candidate is located in the Central or Eastern time zones; West Coast candidates must be willing to work on Eastern Standard Time (EST).
$130k-141.5k yearly Auto-Apply 60d+ ago
ZTD Global IT Service Management Lead
Zoetis 4.9
Remote phlebotomy services technician job
Role Description We are seeking an experienced and visionary ITSM Leader to establish and own the process and governance of a consistent IT Service Management (ITSM) practice across our ZTD organization. This is a pivotal role for our org, which is in the early stages of ITSM maturity, with each function currently operating its own process. The Global ITSM Leader will design, implement, and govern a consistent, organization-wide approach to incident, change, release, and configuration management-with an initial focus on a consistent major incident management. Success for this role includes (1) creating a single, consistent ITSM process that is adopted across the technology organization, (2) establishing a major incident management is standardized, with clear roles, escalation paths, and reporting (3) ensuring process adherence is measurable, with regular reporting and actionable insights, (4) continuous improvement is embedded with ongoing feedback, training, and process optimization, and (5) stakeholders are engaged and empowered, with a shared commitment to service excellence. POSITION RESPONSIBILITIES ITSM Process Ownership & Design Develop, implement, and continuously improve a unified ITSM process framework for incident, change, release, and configuration management. Lead the design and rollout of a single, robust major incident management process across all technology functions. Ensure processes are documented, scalable, and aligned with industry best practices (e.g., ITIL). Governance & Compliance Establish and maintain governance structures to ensure process adherence and accountability. Define and monitor key performance indicators (KPIs) and metrics to measure process effectiveness, compliance, and improvement. Regularly assess process maturity, identify gaps, and drive initiatives for continuous improvement. Stakeholder Engagement & Change Management Collaborate with technology leaders and teams to ensure buy-in and adoption of standardized ITSM processes. Facilitate training, workshops, and communications to promote process understanding and engagement. Act as a change agent, championing a culture of process excellence and service management. Reporting & Communication Provide regular reporting on process adherence, major incident trends, and improvement initiatives to senior leadership. Communicate process changes, updates, and best practices across the organization. EDUCATION AND EXPERIENCE Bachelor's or master's degree in computer science, Business Administration, or other related field or equivalent work experience. 8+ years' experience in working with ITSM and ITIL frameworks TECHNICAL SKILLS REQUIREMENTS Proven experience leading ITSM initiatives in a complex, multi-functional technology environment. Deep understanding of ITSM frameworks (ITIL certification preferred). Strong process design, implementation, and governance skills. Demonstrated ability to drive change and influence stakeholders at all levels. Experience with ITSM tools/platforms (e.g., ServiceNow, Jira Service Management). Excellent communication, facilitation, and interpersonal skills. Analytical mindset with experience defining and tracking KPIs. The US base salary range for this full-time position is $126,000.00 - $205,000.00. Our salary ranges are determined by role, level, and location. The range displayed on each job posting reflects the base pay target range for new hire salaries for the position. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. This position is also eligible for short-term incentive compensation This position is also eligible for long-term incentives In addition to compensation, Zoetis offers a comprehensive benefits package that supports the physical, emotional and financial wellbeing of our colleagues and their families including healthcare and insurance benefits beginning on day one, a 401K plan with a match and profit-sharing contribution from Zoetis, and 4 weeks of vacation. Visit zoetisbenefits.com to learn more. Full time RegularColleague Any unsolicited resumes sent to Zoetis from a third party, such as an Agency recruiter, including unsolicited resumes sent to a Zoetis mailing address, fax machine or email address, directly to Zoetis employees, or to Zoetis resume database will be considered Zoetis property. Zoetis will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. Zoetis will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. This includes any Agency that is an approved/engaged vendor but does not have the appropriate approvals to be engaged on a search. Zoetis is committed to equal opportunity in the terms and conditions of employment for all employees and job applicants without regard to race, color, religion, sex, sexual orientation, age, gender identity or gender expression, national origin, disability or veteran status or any other protected classification. Disabled individuals are given an equal opportunity to use our online application system. We offer reasonable accommodations as an alternative if requested by an individual with a disability. Please contact Zoetis Colleague Services at ********************************** to request an accommodation. Zoetis also complies with all applicable national, state and local laws governing nondiscrimination in employment as well as employment eligibility verification requirements of the Immigration and Nationality Act. All applicants must possess or obtain authorization to work in the US for Zoetis. Zoetis retains sole and exclusive discretion to pursue sponsorship for the acquisition or maintenance of nonimmigrant status and employment eligibility, considering factors such as availability of qualified US workers. Individuals requiring sponsorship must disclose this fact. Please note that Zoetis seeks information related to job applications from candidates for jobs in the U.S. solely via the following: (1) our company website at ********************** site, or (2) via email to/from addresses using only the Zoetis domain of “@zoetis.com”. In addition, Zoetis does not use Google Hangout for any recruitment related activities. Any solicitation or request for information related to job applications with Zoetis via any other means and/or utilizing email addresses with any other domain should be disregarded. In addition, Zoetis will never ask candidates to make any type of personal financial investment related to gaining employment with Zoetis.
$126k-205k yearly Auto-Apply 2d ago
Desktop Management - Infrastructure Services
Testingxperts 4.0
Phlebotomy services technician job in Washington, DC
Greetings for the day! My name is Suneetha from Testing Xperts, we are a global staffing, consulting and technology solutions company, offering industry-specific solutions to our fortune 500 clients and worldwide corporations. Fulltime Interview: Telephonic/Skype Job Description: Technical/Functional Skills -MUST HAVE SKILLS Windows client, Microsoft professional applications, browsers, deep knowledge of hardware-Laptop, desktop and printers, IMAC, Asset management, End user support, Application installation, deployment using SCCM/software center, McAfee end point, ITIL certification, 6 years of technical support experience Roles & Responsibilities • IMAC and break-fix support from user site • Remote support to WAH users • Hardware support - Desktop, laptop, Printers and Mobile devices. • Good knowledge on Servers, active directory and network (voice and video) • Qualifications Graduate Additional Information All your information will be kept confidential according to EEO guidelines.
$56k-81k yearly est. 60d+ ago
Lead Service Technician
The Unlimited 4.3
Phlebotomy services technician job in Springfield, VA
at Whaley Foodservice ***HIRING IMMEDIATELY!!!**** ***Sign On Bonus Available for Qualified Service Technicians*** Whaley Foodservice, LLC is one of the largest commercial kitchen equipment repair service companies in the Southeast comprised of over 600 employees located across 31 geographically dispersed locations.Visit "Whaley Careers" to find your place to grow. ********************************* Pay Rate: $31.00-39.00/hour* At Whaley we know people are vital to our success. We offer a competitive salary, on-call pay, and generous benefits including Sign-On Bonuses for Experienced Technicians Company Vehicle | Mobile Device | Uniforms Meters & Test Equipment Industry Certification 401k & Profit Sharing Paid Holidays & Vacation Medical & Dental Benefits Short-Term Disability | Long-Term Disability Insurance (company paid) Life Insurance (company paid) To learn more about current opportunities, visit Whaley Careers: ********************************* Summary: The Service Technician II provides maintenance, service, and repair for commercial cooking equipment and commercial refrigeration i.e. grills, fryers, ovens, ice machines, reach-in and walk-in coolers, freezers, etc. Details: Diagnoses, troubleshoots, and repairs commercial cooking kitchen equipment, refrigeration. Communicates status updates for part order(s) and repairs with branch support and customer. Completes service calls accurately and timely. Audits truck stock to ensure required parts are stocked. Ensures service vehicle, tools, and uniforms are consistent with Whaley standards of safety. Meets on-call requirements. Required Education | Experience Three years of experience in commercial kitchen repair and or refrigeration. Must be 18 years of age. Completion of a satisfactory background check and drug screen is required. Valid Driver's license and driving record that aligns with our safety standard. Skills and Abilities Ability to work independently Ability to accurately diagnose and troubleshoot: an automotive, electrical, installation, and mechanical background is a plus. Journeyman License and or CFESA certification not required but would be a plus. Strong attention to detail. Excellent communication and soft skills. Good driving record Whaley Foodservice is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
$31-39 hourly Auto-Apply 13d ago
Cyber Client Service Technician - Lima, OH
Gehc
Remote phlebotomy services technician job
SummaryActs as the primary GEHC Services face to the customer(s) served. Responsible for meeting the daily service repair needs of designated Imaging, LCS and Biomed equipment, to include multiple modalities of the customer's equipment. Drives customer satisfaction through Service Excellence.Job DescriptionResponsibilities: Troubleshoot, install, maintain, and service repair needs on designated equipment, specifically around issues related to device cybersecurity. Works closely with multiple device manufacturers regarding cybersecurity issues. Works directly with customer IT and security personnel to implement site cyber security policies. Evaluate progressively complex, customer biomedical equipment security issues and implement appropriate remediations and/or compensating controls. Provide support on imaging or LCS modality equipment first response and coordinate with appropriate modality specialists. Perform on-time and accurate device level security actions. Own customer clinical device security issues from dispatch or identification of issue to resolution. Maintain daily communication with customers to ensure resolution and proper follow-up, leading to customer satisfaction on all device security issues. Focus on customer needs and satisfaction on device security issues, continuously building on and enhancing relationships with customers to become a perceived partner in their business who is able to recommend value-added services that will help the customer run their business more efficiently and securely. Maintain daily communications with customers without direction. Follow as well as guide others as needed regarding appropriate GE security policies, procedures, hospital security protocol, and complete necessary documentation. Engage with other team members including Bio med engineers, Security Operations Center Agents and Remote Technical Engineers to ensure they are aware of the status of all security related issues at all times for their designated customers. Effectively communicate and partner with teammates and colleagues. Understand and communicate business goals and objectives to the broader GE team servicing assigned customer on device security. Keep up to date on administrative responsibilities (e.g., maintaining device level security information and internal service records in a timely manner, patch validation status, clinical device security and networking attributes - OS, MAC address, etc). Utilize the GEHC escalation process, as needed, and work closely with security operations center agents to define and support implementation of corrective action plans to resolve customer issues in a timely manner. Identify potential sales leads and participate in sales opportunities (e.g., contract renewals, assist with promoting and implementing of revenue programs). Keep up to date with competitor information, device security bulletins and market trends. Identify business opportunities for the organization. May include basic/refresher application training of clinical staff and customer security/IT personnel on designated equipment Qualifications : Associate's or Bachelor's degree in Electrical Engineering, Biomedical Engineering, Mechanical Engineering, or related field and 2+ years of experience servicing electrical equipment; OR equivalent military education and 2+ years of experience servicing electrical equipment; OR High School Diploma/GED and 4+ years of experience servicing electrical equipment. Experience interfacing with both internal team members and external customers as part of a solution based service process. Strong communication skills with the ability to communicate technical issues to the customer in an easy to understand manner. Experience diagnosing and repairing mechanical, electromechanical, and/or electronic equipment. Experience troubleshooting and responding to customer concerns. Experience with Web applications and technological programs (e.g., IPad, Iphone Microsoft Office Suite). Capable of performing special physical requirements (e.g., able to lift, carry, push, pull up to 35 lbs unassisted; and frequently bend, stoop, twist, climb, crouch/squat, kneel/crawl, sit, stand for long periods of time; and reach at, above, below shoulder level; and flex/extend neck; and has good hand, finger dexterity and specific vision abilities including color, close vision, distance vision, peripheral vision, depth perception). Must have and maintain a valid driver's license. #LI-PA1 #On-Site We will not sponsor individuals for employment visas, now or in the future, for this job opening. GE HealthCare offers a great work environment, professional development, challenging careers, and competitive compensation. GE HealthCare is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE HealthCare will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). While GE HealthCare does not currently require U.S. employees to be vaccinated against COVID-19, some GE HealthCare customers have vaccination mandates that may apply to certain GE HealthCare employees. Relocation Assistance Provided: Yes
$34k-67k yearly est. Auto-Apply 60d+ ago
Phlebotomy Technician
Decypher 3.8
Phlebotomy services technician job in Bethesda, MD
Decypher is a leading integrator of professional, technology, and management solutions and services. We provide our services globally to Federal, Commercial, Local and State clients. Our employees are our most valuable assets and play an integral role in the success of Decypher and our clients. Working at Decypher is not a job, but a career where your talent and energy is respected and you can personally make a difference. Decypher invites you to join our professional team. Decypher is an equal opportunity/affirmative action employer committed to diversifying its workforce (M/F/D/V). DESCRIPTION Decypher is seeking qualified Phlebotomy Technicians to support the mission at Walter Reed National Military Medical Center (Bethesda, MD) Tuesday- Saturday Shift RESPONSIBILITIES Shall be able to read, write, speak and understand English well enough to effectively communicate with all patients and other health care providers. Knowledge of computer operations and proficiency in the use of basic word processing, data entry and automated medical records. The contracted Certified Phlebotomist will provide the following services and in strict compliance with standing orders and protocols set forth by the MTF, and IAW JC guidelines to include: Properly identifying and label specimens. Maintaining sanitary standards to prevent the transmission of disease. Selecting and implementing the proper, age-appropriate collection techniques. Ensuring that samples are properly prepared for laboratory analysis. Sending specimens to the correct testing locations. Updating patient records. OTHER TASKS AND RESPONSIBLITIES THE CONTRACT EMPLOYEE SHALL PERFORM BUT NOT LIMITED TO: Ensure compliance with standard of care and practice in accordance with all established policies, procedures, and guidelines used in the medical treatment MTF and IAW JC guidelines. Provides care within ethical and legal boundaries. Complete orientation and competency verification programs in accordance with unit guidelines. When assigned, will serve, and participate in committees, functions, and other meetings. Provide relevant and timely information and assists with decision making and process improvement. Will report to the Director of Laboratory Services, or Director of the ASBBC for phlebotomists assigned to mobile blood drives. As required, participate in customer service initiatives and medical readiness activities, designed to enhance health services. Physically helping with the setup and breakdown of mobile blood drives equipment and supplies, able to move/ lift a modest amount of weight (40 lbs.) QUALIFICATIONS Degree/Education: Graduation from an accredited training program resulting in certification by the American Society of Clinical Pathologists (ASCP), Health and Human Services or American Medical Certification Certifications in addition to Basic Life Support: Primarily none required but State dependent. Experience: Minimum of three (3) years of experience. Board Certification: None. Licensure/Registration: None Citizenship: Must be a U.S citizen.
$33k-43k yearly est. 60d+ ago
{"title":"ITS Lead - KEY"}
Jasint
Phlebotomy services technician job in Columbia, MD
Job Title: ITS Lead - KEY Hours: Regular Full-Time Salary Range: $107k/yr - $131k/yr Clearance Requirements requires a current and active Secret Clearance at the time of application. What you will be doing: This position provides the highest level of support to end users by handling service requests that have been escalated by lower tiers. Support will be provided onsite, remotely, over the phone, or via email. They will be required to develop solutions for complex network, desktop, and server problems. They will have the ability to analyze existing systems and make proactive recommendations for improvements. Develops, maintains, and implements all systems, applications, and networking configurations. Position Requirements Minimum Requirements: Experience: * A minimum of 5+ years of experience * Advanced knowledge of current Microsoft desktop and server operating systems * Advanced knowledge of Microsoft SQL, Exchange, SharePoint, and other server applications * Advanced knowledge of computer and server hardware. * Familiarity with network troubleshooting. * Familiarity with Ivanti Management Suite, Microsoft SCCM, or Jamf Pro. * Professional customer service skill * Must be resourceful and able to take initiative in a dynamic environment. * Ability to troubleshoot technical problems effectively and efficiently. Education: * BA/BS from an accredited college or university * AA/AS with 7+ years experience. Certifications: * Require anyone of the following IAT Level II (CySA+, Security+, CND, or SSCP) Certification and CE/OS Certification. * PMI Certification required. * Windows or Apple Certified Technician Physical Demands This is largely a sedentary role; however, some filing is required. The ability to move files, open filing cabinets, and bend or stand as necessary would be required. Why JASINT? At JASINT, we proudly boast a together we can attitude. That is only possible with a strong talented team. Our goal is to answer the call to provide top mission and Warfighter support at all levels, and thats why we are seeking you! We understand and respect the dedication and sacrifice required to serve our nations greatest efforts, and our commitment, in turn, is to Support You! JASINT cares about your work-life balance and offers competitive benefits to help you at every stage of your personal and professional life by providing the following: Retirement/401k with an employer match, employer-paid health, dental, vision for employees, flexible spending accounts (HSA/FSA), company partially funded HSA, STD/LTD, professional development, tuition and certification reimbursement, spot award recognition, PTO, Floating Holidays. * JASINT offers internal and external referral bonuses for all cleared exceptional talent we hire! Friends of yours are friends of JASINT! * JASINT provides equal employment opportunities to all employees and applicants without regard to race, color, ancestry, national origin, gender, sexual orientation, marital status, religion, age, disability, gender identity, genetic testing results, or service in the military. Equal employment opportunity applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. JASINT participates in E-Verify and will provide the federal government with I-9 information to confirm that all new hires are authorized to work in the U.S. To learn more about E-Verify, please visit dhs.gov/e-verify.
$107k-131k yearly 8d ago
Service Technician & Warehouse Lead
Reach Services DMV LLC
Phlebotomy services technician job in Lanham, MD
Job Description Service Technician & Warehouse Lead REPORTS TO: Operations Manager Founded in 1996 in Florida, and established in Maryland in 2024, Reach Services is the premier source for suspended & supported scaffolding systems & specialty hoisting services for the South Florida Area, DMV region and beyond. Staffed by certified, factory-trained technicians, Reach Services offers reliable hoist and equipment repair services. Clients trust us to consistently deliver high-quality services at a competitive price. As the fastest-growing suspended access company in the area, we specialize in providing tailored solutions for facade work on any unique project. OVERVIEW: This position reports directly to the Operations Manager and is responsible for performing routine inspections, preventive maintenance, and repairs on hoist equipment. Additionally, you will assist in managing the warehouse and fleet operations, overseeing logistics, and maintaining inventory to ensure smooth operations. Specific duties and responsibilities include but are not limited to: DUTIES & RESPONSIBILITES: Service & Maintenance: Perform inspections, troubleshooting, teardown, repair, reassembly, and testing on suspended access equipment and related accessories. Diagnose errors and technical problems, determining and implementing proper solutions. Conduct diagnostic tests and complex mechanical repairs under the direction of a supervisor or service center lead. Provide on-site customer service and support via phone and email. Complete all required training and certification for equipment maintenance (training provided). Warehouse & Fleet Management: Oversee daily warehouse operations, ensuring efficient material handling, storage, and distribution. Coordinate and manage the maintenance of the equipment fleet and warehouse inventory. Forklift use is required. Delivery of equipment is required as needed. Supervise the warehouse to ensure tasks are completed safely and efficiently. Ensure safe storage, cataloging, and security of materials. Maintain accurate inventory records and assist in stock replenishment. Logistics & Coordination: Collaborate with logistics managers to optimize space utilization and streamline warehouse processes. Ensure all equipment and materials are properly received, stored, and dispatched. Coordinate and ensure smooth delivery and service operations for customer requests. QUALIFICATIONS: Proficiency in verbal and written English required High school diploma or GED required Experience with swing stage, rigging, scaffolding is a plus Forklift experience is preferred Basic proficiency in Microsoft Office Suite Software Knowledge of warehouse management and fleet operations is a plus High level verbal and written communication skills required Driver's License and reliable transportation required OSHA 30-Hour certification (or commitment to obtain it) is required Ability to multitask in a fast-paced environment JOB DEMANDS Willingness to work flexible hours, including nights and weekends, as needed Ability to stand, walk, and navigate uneven terrain for extended periods of time Occasional crouching, bending, and kneeling as needed Capacity to lift and carry materials weighing up to 75 pounds Certain requirements are subject to possible modifications to reasonably accommodate persons with disabilities.
$63k-106k yearly est. 25d ago
Certified Phlebotomy Technician
Epic Government
Phlebotomy services technician job in Camp Springs, MD
Description Job title: Certified Phlebotomy Technician Schedule: Weekdays; 8-10 hour shifts Overview: Perform high-quality specimen collection and processing for a diverse patient population in an outpatient military clinic. Key responsibilities: • Venipuncture, capillary collection, proper labeling/transport • Patient identification, specimen integrity, and safety practices • EMR/LIS documentation and support tasks as assigned Qualifications: • National phlebotomy certification; BLS; 1-3 years recent experience • U.S. citizenship; immunizations/screenings required Compensation: Estimated $18.50-$23.72 per hour #ICSP Federal Staffing Resources (FSR) is an Equal Opportunity Employer and a proud partner in the Federal Government's commitment to diversity and inclusion. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, protected veteran status, disability, or any other characteristic protected by law.
$18.5-23.7 hourly Auto-Apply 60d+ ago
Adjunct, Phlebotomy Technician
Frederick Community College 4.3
Phlebotomy services technician job in Frederick, MD
Posting Details Information Adjunct Job Title Adjunct, Phlebotomy Technician Discipline(s) Adjunct Job Description No remote teaching opportunities are available at this time Phlebotomy instructors provide both didactic and skills instruction in the Phlebotomy Technician program to prepare continuing education students for clinical experience and employment. Instructor evaluates students by a variety of means to measure progress in achieving course objectives and skills mastery and informs students of their progress. Essential Duties and Responsibilities: 1. Conduct organized classes at the instructional level to meet the educational requirements stated in the course description and objectives. 2. Teach core skills related to phlebotomy and other lab techniques 3. Evaluate the progress of each student; notify students in need of remediation and/or tutoring services. 4. Prepare students for required clinical course 5. Maintains professional relationships with students, colleagues and the community. 6. Participate in appropriate professional development activities to assure currency in both discipline, knowledge and instructional methods Required Minimum Qualifications: 1. Currently Certified Phlebotomist 2. Minimum 2 years of experience as a phlebotomist 3. Knowledge of current phlebotomy protocol and procedures Desired Qualifications: 1. Associates degree or higher 2. Previous teaching experience (classroom or corporate training) 3. Experience using Blackboard LMS and PowerPoint 4. Excellent oral and written communication skills 5. Sensitivity to and understanding of the diverse academic, socioeconomic, cultural, disability, and ethnic backgrounds of community college students Pool Number TS655P Special Instructions to Applicants All applications and required documents must be submitted online. Mail, e-mail, or fax submissions will not be accepted. By completing this application, you are putting your name into consideration to be hired as a Frederick Community College adjunct faculty member. This posting will remain active through 5/31/2026. For questions regarding this position or for more information, please contact Evelyne Crooks at *********************. Frederick Community College, an equal opportunity employer, values campus diversity in students and staff and strongly encourages members from historically under-represented groups to apply. Frederick Community College prohibits discrimination against any person on the basis of age, ancestry, citizenship status, color, creed, ethnicity, gender identity and expression, genetic information, marital status, mental or physical disability, national origin, race, religious affiliation, sex, sexual orientation, or veteran status in its activities, admissions, educational programs, and employment. Frederick Community College, an equal opportunity employer, values campus diversity in students and staff and encourages members from historically under-represented groups to apply. Non-Discrimination Statement Frederick Community College is committed to the principles of equal opportunity and strictly prohibits discrimination against any person on the basis of age, ancestry, citizenship status, color, creed, ethnicity, gender identity and expression, genetic information, marital status, mental or physical disability, national origin, race, religious affiliation, sex, sexual orientation, or veteran status in its activities, admissions, educational programs, and employment. Essential Personnel? Telework Eligible? Supplemental Questions
$31k-37k yearly est. Easy Apply 43d ago

Learn more about phlebotomy services technician jobs

Zippia Careers
Installation, Maintenance and Repair Industry
Phlebotomy Services Technician
Phlebotomy Services Technician Jobs

Updated November 12, 2025

Browse installation, maintenance and repair jobs

Phlebotomy services technician jobs near me

Semiconductor Field Service Technician III

HQA Regional Training and Service Technician, Fleet - IAD

Field Service Technician

Field Service Technician

Remote Financial Services

Construction Services Field Representative

Service Technician - Baltimore-Washington

Equipment Service Technician

Digital Services Technical Lead

Service Tech Team Lead - Environmental Services - FT - Day

Technical Service Lead - Remote Support

ZTD Global IT Service Management Lead

Desktop Management - Infrastructure Services

Lead Service Technician

Cyber Client Service Technician - Lima, OH

Phlebotomy Technician

{"title":"ITS Lead - KEY"}

Service Technician & Warehouse Lead

Certified Phlebotomy Technician

Adjunct, Phlebotomy Technician

Learn more about phlebotomy services technician jobs

Phlebotomy Services Technician related jobs

Phlebotomy Services Technician related careers

What similar roles do

Resume for related jobs