Post job

Refrigeration Technician jobs at Pilgrim's

- 57 jobs
  • Refrigeration Tech - Night Shift

    Pilgrim's 4.6company rating

    Refrigeration technician job at Pilgrim's

    at Pilgrim's Installs and repairs industrial and commercial refrigerating systems (ammonia and Freon) and equipment by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES Include the following (Other duties may be assigned): Lays out reference points for installation of structural and functional components. Drills holes and installs mounting brackets and hangers into floor and walls of building. Lifts or hoists and aligns components into position. Screws, bolts, rivets, welds, and brazes parts to assemble structural and functional components such as motors, controls, switches, gauges, wiring harnesses, valves, pumps, compressors, condensers, cores, and pipes. Cuts, threads, and connects pipe to functional components and water or power system of premises. Pumps specified gas or fluid into system. Starts system, observes operation, reads gauges and instruments, and adjusts mechanisms such as valves, controls, and pumps to control level of fluid, pressure, and temperature in system. Dismantles malfunctioning systems and tests components. Replaces or adjusts defective or worn parts to repair systems. Insulates shells and cabinets of systems. Installs wiring to connect components to electric power source. Wear self contained breathing apparatus (SCBA) if required. Work in extremely hot and cold environment. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED);Prior experience in Refrigeration systems or equivalent degree from a technical school. or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and smell. The employee must occasionally lift and/or move up to 70 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; and risk of electrical shock. The noise level in the work environment is usually loud. EOE, including disability/vets
    $43k-55k yearly est. Auto-Apply 4d ago
  • Refrigeration Tech - Night Shift

    Pilgrim's 4.6company rating

    Refrigeration technician job at Pilgrim's

    **Refrigeration Technician (Hourly)** Installs and repairs industrial and commercial refrigerating systems (ammonia and Freon) and equipment by performing the following duties. **ESSENTIAL DUTIES AND RESPONSIBILITIES** Include the following (Other duties may be assigned): + Lays out reference points for installation of structural and functional components. + Drills holes and installs mounting brackets and hangers into floor and walls of building. + Lifts or hoists and aligns components into position. + Screws, bolts, rivets, welds, and brazes parts to assemble structural and functional components such as motors, controls, switches, gauges, wiring harnesses, valves, pumps, compressors, condensers, cores, and pipes. + Cuts, threads, and connects pipe to functional components and water or power system of premises. + Pumps specified gas or fluid into system. + Starts system, observes operation, reads gauges and instruments, and adjusts mechanisms such as valves, controls, and pumps to control level of fluid, pressure, and temperature in system. + Dismantles malfunctioning systems and tests components. + Replaces or adjusts defective or worn parts to repair systems. + Insulates shells and cabinets of systems. + Installs wiring to connect components to electric power source. + Wear self contained breathing apparatus (SCBA) if required. + Work in extremely hot and cold environment. **QUALIFICATIONS** To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. **EDUCATION and/or EXPERIENCE** High school diploma or general education degree (GED);Prior experience in Refrigeration systems or equivalent degree from a technical school. or equivalent combination of education and experience. **LANGUAGE SKILLS** + Ability to read and comprehend simple instructions, short correspondence, and memos. + Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. **MATHEMATICAL SKILLS** Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. **REASONING ABILITY** Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. **PHYSICAL DEMANDS** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and smell. The employee must occasionally lift and/or move up to 70 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. **WORK ENVIRONMENT** The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; and risk of electrical shock. The noise level in the work environment is usually loud. **EOE, including disability/vets**
    $43k-55k yearly est. 4d ago
  • Millwright

    Cargill 4.7company rating

    Belton, TX jobs

    New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TX Job Type: Full Time Shift(s) Available: 2nd & 3rd Compensation: $27.00/hr - $36.25/hr Sign on Bonus: $3.000 Benefits Information Overtime Potential Holiday Pay Paid time off after 30 days Health Insurance (Medical, Dental, & Vision) 401(k) Retirement Plan Tuition Reimbursement Life Insurance and Short-Term Disability Career Development Opportunities Employee Discounts Principal Accountabilities Using hand tools to perform maintenance on production machinery Ensuring food safety and quality Cleanliness and housekeeping Responding to radio calls from other departments (production, food safety, safety, etc) for maintenance related actions Communicating with other departments and other maintenance shifts to ensure proper pass down of maintenance related issues to the next shift Documenting daily work assigned on paper and also in the maintenance management system (SAP) Troubleshoot and repair complex problems on all production equipment Utilize parts in inventory to repair equipment and follow procedures in documenting what is issued out Identify problems and make suggestions to improve operational processes PM from required section Contact equipment vendors to assist in troubleshooting issues, researching parts needed, and requesting quotes for parts Must be able to learn and use SAP to document work hours, search for parts, and generate work orders Perform advanced preventative maintenance (PM's) on plant equipment Use measuring devices accurately (metric and standard). Use multimeters, megohmmeters, and any other test equipment needed to aid in troubleshooting and repair of equipment 2 year maintenance experience in a manufacturing facility Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Able to perform physical tasks (kneeling, bending, climbing), work in elevated areas (4ft and above) and able to lift up to 50 lbs with or without reasonable accommodations Ability to read, write, and speak English Ability to use tools and work on mechanical and pneumatic components Able to perform basic computer skills Ability to troubleshoot electrical power, control systems, and control powers Preferred Qualifications Ability to perform basic welding Work history in the past 12 months Able to operate forklift and other motorized equipment Program PLC's using schematics and ladder logic Completed industrial maintenance certification program Minimum of 1 year maintenance with proven preventative maintenance (PM's) experience in a manufacturing facility Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
    $27-36.3 hourly 1d ago
  • Millwright

    Cargill 4.7company rating

    Austin, TX jobs

    New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TX Job Type: Full Time Shift(s) Available: 2nd & 3rd Compensation: $27.00/hr - $36.25/hr Sign on Bonus: $3.000 Benefits Information Overtime Potential Holiday Pay Paid time off after 30 days Health Insurance (Medical, Dental, & Vision) 401(k) Retirement Plan Tuition Reimbursement Life Insurance and Short-Term Disability Career Development Opportunities Employee Discounts Principal Accountabilities Using hand tools to perform maintenance on production machinery Ensuring food safety and quality Cleanliness and housekeeping Responding to radio calls from other departments (production, food safety, safety, etc) for maintenance related actions Communicating with other departments and other maintenance shifts to ensure proper pass down of maintenance related issues to the next shift Documenting daily work assigned on paper and also in the maintenance management system (SAP) Troubleshoot and repair complex problems on all production equipment Utilize parts in inventory to repair equipment and follow procedures in documenting what is issued out Identify problems and make suggestions to improve operational processes PM from required section Contact equipment vendors to assist in troubleshooting issues, researching parts needed, and requesting quotes for parts Must be able to learn and use SAP to document work hours, search for parts, and generate work orders Perform advanced preventative maintenance (PM's) on plant equipment Use measuring devices accurately (metric and standard). Use multimeters, megohmmeters, and any other test equipment needed to aid in troubleshooting and repair of equipment 2 year maintenance experience in a manufacturing facility Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Able to perform physical tasks (kneeling, bending, climbing), work in elevated areas (4ft and above) and able to lift up to 50 lbs with or without reasonable accommodations Ability to read, write, and speak English Ability to use tools and work on mechanical and pneumatic components Able to perform basic computer skills Ability to troubleshoot electrical power, control systems, and control powers Preferred Qualifications Ability to perform basic welding Work history in the past 12 months Able to operate forklift and other motorized equipment Program PLC's using schematics and ladder logic Completed industrial maintenance certification program Minimum of 1 year maintenance with proven preventative maintenance (PM's) experience in a manufacturing facility Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
    $27-36.3 hourly 1d ago
  • Millwright

    Cargill 4.7company rating

    Killeen, TX jobs

    New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TX Job Type: Full Time Shift(s) Available: 2nd & 3rd Compensation: $27.00/hr - $36.25/hr Sign on Bonus: $3.000 Benefits Information Overtime Potential Holiday Pay Paid time off after 30 days Health Insurance (Medical, Dental, & Vision) 401(k) Retirement Plan Tuition Reimbursement Life Insurance and Short-Term Disability Career Development Opportunities Employee Discounts Principal Accountabilities Using hand tools to perform maintenance on production machinery Ensuring food safety and quality Cleanliness and housekeeping Responding to radio calls from other departments (production, food safety, safety, etc) for maintenance related actions Communicating with other departments and other maintenance shifts to ensure proper pass down of maintenance related issues to the next shift Documenting daily work assigned on paper and also in the maintenance management system (SAP) Troubleshoot and repair complex problems on all production equipment Utilize parts in inventory to repair equipment and follow procedures in documenting what is issued out Identify problems and make suggestions to improve operational processes PM from required section Contact equipment vendors to assist in troubleshooting issues, researching parts needed, and requesting quotes for parts Must be able to learn and use SAP to document work hours, search for parts, and generate work orders Perform advanced preventative maintenance (PM's) on plant equipment Use measuring devices accurately (metric and standard). Use multimeters, megohmmeters, and any other test equipment needed to aid in troubleshooting and repair of equipment 2 year maintenance experience in a manufacturing facility Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Able to perform physical tasks (kneeling, bending, climbing), work in elevated areas (4ft and above) and able to lift up to 50 lbs with or without reasonable accommodations Ability to read, write, and speak English Ability to use tools and work on mechanical and pneumatic components Able to perform basic computer skills Ability to troubleshoot electrical power, control systems, and control powers Preferred Qualifications Ability to perform basic welding Work history in the past 12 months Able to operate forklift and other motorized equipment Program PLC's using schematics and ladder logic Completed industrial maintenance certification program Minimum of 1 year maintenance with proven preventative maintenance (PM's) experience in a manufacturing facility Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
    $27-36.3 hourly 1d ago
  • Millwright

    Cargill 4.7company rating

    Bartlett, TX jobs

    New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TX Job Type: Full Time Shift(s) Available: 2nd & 3rd Compensation: $27.00/hr - $36.25/hr Sign on Bonus: $3.000 Benefits Information Overtime Potential Holiday Pay Paid time off after 30 days Health Insurance (Medical, Dental, & Vision) 401(k) Retirement Plan Tuition Reimbursement Life Insurance and Short-Term Disability Career Development Opportunities Employee Discounts Principal Accountabilities Using hand tools to perform maintenance on production machinery Ensuring food safety and quality Cleanliness and housekeeping Responding to radio calls from other departments (production, food safety, safety, etc) for maintenance related actions Communicating with other departments and other maintenance shifts to ensure proper pass down of maintenance related issues to the next shift Documenting daily work assigned on paper and also in the maintenance management system (SAP) Troubleshoot and repair complex problems on all production equipment Utilize parts in inventory to repair equipment and follow procedures in documenting what is issued out Identify problems and make suggestions to improve operational processes PM from required section Contact equipment vendors to assist in troubleshooting issues, researching parts needed, and requesting quotes for parts Must be able to learn and use SAP to document work hours, search for parts, and generate work orders Perform advanced preventative maintenance (PM's) on plant equipment Use measuring devices accurately (metric and standard). Use multimeters, megohmmeters, and any other test equipment needed to aid in troubleshooting and repair of equipment 2 year maintenance experience in a manufacturing facility Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Able to perform physical tasks (kneeling, bending, climbing), work in elevated areas (4ft and above) and able to lift up to 50 lbs with or without reasonable accommodations Ability to read, write, and speak English Ability to use tools and work on mechanical and pneumatic components Able to perform basic computer skills Ability to troubleshoot electrical power, control systems, and control powers Preferred Qualifications Ability to perform basic welding Work history in the past 12 months Able to operate forklift and other motorized equipment Program PLC's using schematics and ladder logic Completed industrial maintenance certification program Minimum of 1 year maintenance with proven preventative maintenance (PM's) experience in a manufacturing facility Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
    $27-36.3 hourly 1d ago
  • Millwright

    Cargill 4.7company rating

    Burnet, TX jobs

    New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TX Job Type: Full Time Shift(s) Available: 2nd & 3rd Compensation: $27.00/hr - $36.25/hr Sign on Bonus: $3.000 Benefits Information Overtime Potential Holiday Pay Paid time off after 30 days Health Insurance (Medical, Dental, & Vision) 401(k) Retirement Plan Tuition Reimbursement Life Insurance and Short-Term Disability Career Development Opportunities Employee Discounts Principal Accountabilities Using hand tools to perform maintenance on production machinery Ensuring food safety and quality Cleanliness and housekeeping Responding to radio calls from other departments (production, food safety, safety, etc) for maintenance related actions Communicating with other departments and other maintenance shifts to ensure proper pass down of maintenance related issues to the next shift Documenting daily work assigned on paper and also in the maintenance management system (SAP) Troubleshoot and repair complex problems on all production equipment Utilize parts in inventory to repair equipment and follow procedures in documenting what is issued out Identify problems and make suggestions to improve operational processes PM from required section Contact equipment vendors to assist in troubleshooting issues, researching parts needed, and requesting quotes for parts Must be able to learn and use SAP to document work hours, search for parts, and generate work orders Perform advanced preventative maintenance (PM's) on plant equipment Use measuring devices accurately (metric and standard). Use multimeters, megohmmeters, and any other test equipment needed to aid in troubleshooting and repair of equipment 2 year maintenance experience in a manufacturing facility Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Able to perform physical tasks (kneeling, bending, climbing), work in elevated areas (4ft and above) and able to lift up to 50 lbs with or without reasonable accommodations Ability to read, write, and speak English Ability to use tools and work on mechanical and pneumatic components Able to perform basic computer skills Ability to troubleshoot electrical power, control systems, and control powers Preferred Qualifications Ability to perform basic welding Work history in the past 12 months Able to operate forklift and other motorized equipment Program PLC's using schematics and ladder logic Completed industrial maintenance certification program Minimum of 1 year maintenance with proven preventative maintenance (PM's) experience in a manufacturing facility Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
    $27-36.3 hourly 1d ago
  • Refrigeration Tech - Night Shift

    Pilgrim's Pride Corp 4.6company rating

    Refrigeration technician job at Pilgrim's

    Refrigeration Technician (Hourly) Installs and repairs industrial and commercial refrigerating systems (ammonia and Freon) and equipment by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES Include the following (Other duties may be assigned): * Lays out reference points for installation of structural and functional components. * Drills holes and installs mounting brackets and hangers into floor and walls of building. * Lifts or hoists and aligns components into position. * Screws, bolts, rivets, welds, and brazes parts to assemble structural and functional components such as motors, controls, switches, gauges, wiring harnesses, valves, pumps, compressors, condensers, cores, and pipes. * Cuts, threads, and connects pipe to functional components and water or power system of premises. * Pumps specified gas or fluid into system. * Starts system, observes operation, reads gauges and instruments, and adjusts mechanisms such as valves, controls, and pumps to control level of fluid, pressure, and temperature in system. * Dismantles malfunctioning systems and tests components. * Replaces or adjusts defective or worn parts to repair systems. * Insulates shells and cabinets of systems. * Installs wiring to connect components to electric power source. * Wear self contained breathing apparatus (SCBA) if required. * Work in extremely hot and cold environment. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma or general education degree (GED);Prior experience in Refrigeration systems or equivalent degree from a technical school. or equivalent combination of education and experience. LANGUAGE SKILLS * Ability to read and comprehend simple instructions, short correspondence, and memos. * Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and smell. The employee must occasionally lift and/or move up to 70 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; and risk of electrical shock. The noise level in the work environment is usually loud. EOE, including disability/vets
    $43k-55k yearly est. 5d ago
  • Maintenance Mechanic

    Cargill 4.7company rating

    Rosebud, TX jobs

    New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TX Job Type: Full Time Shift(s) Available: 2nd & 3rd Compensation: $27.00/hr - $36.25/hr Sign on Bonus: $3.000 Benefits Information Overtime Potential Holiday Pay Paid time off after 30 days Health Insurance (Medical, Dental, & Vision) 401(k) Retirement Plan Tuition Reimbursement Life Insurance and Short-Term Disability Career Development Opportunities Employee Discounts Principal Accountabilities Using hand tools to perform maintenance on production machinery Ensuring food safety and quality Cleanliness and housekeeping Responding to radio calls from other departments (production, food safety, safety, etc) for maintenance related actions Communicating with other departments and other maintenance shifts to ensure proper pass down of maintenance related issues to the next shift Documenting daily work assigned on paper and also in the maintenance management system (SAP) Troubleshoot and repair complex problems on all production equipment Utilize parts in inventory to repair equipment and follow procedures in documenting what is issued out Identify problems and make suggestions to improve operational processes PM from required section Contact equipment vendors to assist in troubleshooting issues, researching parts needed, and requesting quotes for parts Must be able to learn and use SAP to document work hours, search for parts, and generate work orders Perform advanced preventative maintenance (PM's) on plant equipment Use measuring devices accurately (metric and standard). Use multimeters, megohmmeters, and any other test equipment needed to aid in troubleshooting and repair of equipment 2 year maintenance experience in a manufacturing facility Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Able to perform physical tasks (kneeling, bending, climbing), work in elevated areas (4ft and above) and able to lift up to 50 lbs with or without reasonable accommodations Ability to read, write, and speak English Ability to use tools and work on mechanical and pneumatic components Able to perform basic computer skills Ability to troubleshoot electrical power, control systems, and control powers Preferred Qualifications Ability to perform basic welding Work history in the past 12 months Able to operate forklift and other motorized equipment Program PLC's using schematics and ladder logic Completed industrial maintenance certification program Minimum of 1 year maintenance with proven preventative maintenance (PM's) experience in a manufacturing facility Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
    $27-36.3 hourly 1d ago
  • Maintenance Technician

    Cargill 4.7company rating

    Granger, TX jobs

    New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TX Job Type: Full Time Shift(s) Available: 2nd & 3rd Compensation: $27.00/hr - $36.25/hr Sign on Bonus: $3.000 Benefits Information Overtime Potential Holiday Pay Paid time off after 30 days Health Insurance (Medical, Dental, & Vision) 401(k) Retirement Plan Tuition Reimbursement Life Insurance and Short-Term Disability Career Development Opportunities Employee Discounts Principal Accountabilities Using hand tools to perform maintenance on production machinery Ensuring food safety and quality Cleanliness and housekeeping Responding to radio calls from other departments (production, food safety, safety, etc) for maintenance related actions Communicating with other departments and other maintenance shifts to ensure proper pass down of maintenance related issues to the next shift Documenting daily work assigned on paper and also in the maintenance management system (SAP) Troubleshoot and repair complex problems on all production equipment Utilize parts in inventory to repair equipment and follow procedures in documenting what is issued out Identify problems and make suggestions to improve operational processes PM from required section Contact equipment vendors to assist in troubleshooting issues, researching parts needed, and requesting quotes for parts Must be able to learn and use SAP to document work hours, search for parts, and generate work orders Perform advanced preventative maintenance (PM's) on plant equipment Use measuring devices accurately (metric and standard). Use multimeters, megohmmeters, and any other test equipment needed to aid in troubleshooting and repair of equipment 2 year maintenance experience in a manufacturing facility Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Able to perform physical tasks (kneeling, bending, climbing), work in elevated areas (4ft and above) and able to lift up to 50 lbs with or without reasonable accommodations Ability to read, write, and speak English Ability to use tools and work on mechanical and pneumatic components Able to perform basic computer skills Ability to troubleshoot electrical power, control systems, and control powers Preferred Qualifications Ability to perform basic welding Work history in the past 12 months Able to operate forklift and other motorized equipment Program PLC's using schematics and ladder logic Completed industrial maintenance certification program Minimum of 1 year maintenance with proven preventative maintenance (PM's) experience in a manufacturing facility Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
    $27-36.3 hourly 1d ago
  • Maintenance Mechanic

    Cargill 4.7company rating

    Cameron, TX jobs

    New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TX Job Type: Full Time Shift(s) Available: 2nd & 3rd Compensation: $27.00/hr - $36.25/hr Sign on Bonus: $3.000 Benefits Information Overtime Potential Holiday Pay Paid time off after 30 days Health Insurance (Medical, Dental, & Vision) 401(k) Retirement Plan Tuition Reimbursement Life Insurance and Short-Term Disability Career Development Opportunities Employee Discounts Principal Accountabilities Using hand tools to perform maintenance on production machinery Ensuring food safety and quality Cleanliness and housekeeping Responding to radio calls from other departments (production, food safety, safety, etc) for maintenance related actions Communicating with other departments and other maintenance shifts to ensure proper pass down of maintenance related issues to the next shift Documenting daily work assigned on paper and also in the maintenance management system (SAP) Troubleshoot and repair complex problems on all production equipment Utilize parts in inventory to repair equipment and follow procedures in documenting what is issued out Identify problems and make suggestions to improve operational processes PM from required section Contact equipment vendors to assist in troubleshooting issues, researching parts needed, and requesting quotes for parts Must be able to learn and use SAP to document work hours, search for parts, and generate work orders Perform advanced preventative maintenance (PM's) on plant equipment Use measuring devices accurately (metric and standard). Use multimeters, megohmmeters, and any other test equipment needed to aid in troubleshooting and repair of equipment 2 year maintenance experience in a manufacturing facility Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Able to perform physical tasks (kneeling, bending, climbing), work in elevated areas (4ft and above) and able to lift up to 50 lbs with or without reasonable accommodations Ability to read, write, and speak English Ability to use tools and work on mechanical and pneumatic components Able to perform basic computer skills Ability to troubleshoot electrical power, control systems, and control powers Preferred Qualifications Ability to perform basic welding Work history in the past 12 months Able to operate forklift and other motorized equipment Program PLC's using schematics and ladder logic Completed industrial maintenance certification program Minimum of 1 year maintenance with proven preventative maintenance (PM's) experience in a manufacturing facility Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
    $27-36.3 hourly 1d ago
  • Maintenance Technician

    Cargill 4.7company rating

    The Hills, TX jobs

    New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TX Job Type: Full Time Shift(s) Available: 2nd & 3rd Compensation: $27.00/hr - $36.25/hr Sign on Bonus: $3.000 Benefits Information Overtime Potential Holiday Pay Paid time off after 30 days Health Insurance (Medical, Dental, & Vision) 401(k) Retirement Plan Tuition Reimbursement Life Insurance and Short-Term Disability Career Development Opportunities Employee Discounts Principal Accountabilities Using hand tools to perform maintenance on production machinery Ensuring food safety and quality Cleanliness and housekeeping Responding to radio calls from other departments (production, food safety, safety, etc) for maintenance related actions Communicating with other departments and other maintenance shifts to ensure proper pass down of maintenance related issues to the next shift Documenting daily work assigned on paper and also in the maintenance management system (SAP) Troubleshoot and repair complex problems on all production equipment Utilize parts in inventory to repair equipment and follow procedures in documenting what is issued out Identify problems and make suggestions to improve operational processes PM from required section Contact equipment vendors to assist in troubleshooting issues, researching parts needed, and requesting quotes for parts Must be able to learn and use SAP to document work hours, search for parts, and generate work orders Perform advanced preventative maintenance (PM's) on plant equipment Use measuring devices accurately (metric and standard). Use multimeters, megohmmeters, and any other test equipment needed to aid in troubleshooting and repair of equipment 2 year maintenance experience in a manufacturing facility Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Able to perform physical tasks (kneeling, bending, climbing), work in elevated areas (4ft and above) and able to lift up to 50 lbs with or without reasonable accommodations Ability to read, write, and speak English Ability to use tools and work on mechanical and pneumatic components Able to perform basic computer skills Ability to troubleshoot electrical power, control systems, and control powers Preferred Qualifications Ability to perform basic welding Work history in the past 12 months Able to operate forklift and other motorized equipment Program PLC's using schematics and ladder logic Completed industrial maintenance certification program Minimum of 1 year maintenance with proven preventative maintenance (PM's) experience in a manufacturing facility Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
    $27-36.3 hourly 1d ago
  • Maintenance Mechanic

    Cargill 4.7company rating

    Marble Falls, TX jobs

    New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TX Job Type: Full Time Shift(s) Available: 2nd & 3rd Compensation: $27.00/hr - $36.25/hr Sign on Bonus: $3.000 Benefits Information Overtime Potential Holiday Pay Paid time off after 30 days Health Insurance (Medical, Dental, & Vision) 401(k) Retirement Plan Tuition Reimbursement Life Insurance and Short-Term Disability Career Development Opportunities Employee Discounts Principal Accountabilities Using hand tools to perform maintenance on production machinery Ensuring food safety and quality Cleanliness and housekeeping Responding to radio calls from other departments (production, food safety, safety, etc) for maintenance related actions Communicating with other departments and other maintenance shifts to ensure proper pass down of maintenance related issues to the next shift Documenting daily work assigned on paper and also in the maintenance management system (SAP) Troubleshoot and repair complex problems on all production equipment Utilize parts in inventory to repair equipment and follow procedures in documenting what is issued out Identify problems and make suggestions to improve operational processes PM from required section Contact equipment vendors to assist in troubleshooting issues, researching parts needed, and requesting quotes for parts Must be able to learn and use SAP to document work hours, search for parts, and generate work orders Perform advanced preventative maintenance (PM's) on plant equipment Use measuring devices accurately (metric and standard). Use multimeters, megohmmeters, and any other test equipment needed to aid in troubleshooting and repair of equipment 2 year maintenance experience in a manufacturing facility Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Able to perform physical tasks (kneeling, bending, climbing), work in elevated areas (4ft and above) and able to lift up to 50 lbs with or without reasonable accommodations Ability to read, write, and speak English Ability to use tools and work on mechanical and pneumatic components Able to perform basic computer skills Ability to troubleshoot electrical power, control systems, and control powers Preferred Qualifications Ability to perform basic welding Work history in the past 12 months Able to operate forklift and other motorized equipment Program PLC's using schematics and ladder logic Completed industrial maintenance certification program Minimum of 1 year maintenance with proven preventative maintenance (PM's) experience in a manufacturing facility Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
    $27-36.3 hourly 1d ago
  • Maintenance Technician

    Cargill 4.7company rating

    Fort Worth, TX jobs

    New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Fort Worth, TX Job Type: Full Time Shift(s) Available: 1st Compensation: $31.00 - $38.50/ Hourly Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill matching contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Ensure the safety needs are given top priority in work planning Preserves functions of our physical assets to the satisfaction of their owners, users & society Using hand tools to perform maintenance on production machinery Perform preventative maintenance on equipment and machinery Ensuring food safety and quality Cleanliness and housekeeping Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Ability to read, write, and speak English Preferred Qualifications Mechanical, Electrical or Electronic experience Welding Experience High school diploma or GED College or tech school certificate Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet
    $31-38.5 hourly 49d ago
  • Maintenance Mechanic

    Cargill 4.7company rating

    Weir, TX jobs

    New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TX Job Type: Full Time Shift(s) Available: 2nd & 3rd Compensation: $27.00/hr - $36.25/hr Sign on Bonus: $3.000 Benefits Information Overtime Potential Holiday Pay Paid time off after 30 days Health Insurance (Medical, Dental, & Vision) 401(k) Retirement Plan Tuition Reimbursement Life Insurance and Short-Term Disability Career Development Opportunities Employee Discounts Principal Accountabilities Using hand tools to perform maintenance on production machinery Ensuring food safety and quality Cleanliness and housekeeping Responding to radio calls from other departments (production, food safety, safety, etc) for maintenance related actions Communicating with other departments and other maintenance shifts to ensure proper pass down of maintenance related issues to the next shift Documenting daily work assigned on paper and also in the maintenance management system (SAP) Troubleshoot and repair complex problems on all production equipment Utilize parts in inventory to repair equipment and follow procedures in documenting what is issued out Identify problems and make suggestions to improve operational processes PM from required section Contact equipment vendors to assist in troubleshooting issues, researching parts needed, and requesting quotes for parts Must be able to learn and use SAP to document work hours, search for parts, and generate work orders Perform advanced preventative maintenance (PM's) on plant equipment Use measuring devices accurately (metric and standard). Use multimeters, megohmmeters, and any other test equipment needed to aid in troubleshooting and repair of equipment 2 year maintenance experience in a manufacturing facility Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Able to perform physical tasks (kneeling, bending, climbing), work in elevated areas (4ft and above) and able to lift up to 50 lbs with or without reasonable accommodations Ability to read, write, and speak English Ability to use tools and work on mechanical and pneumatic components Able to perform basic computer skills Ability to troubleshoot electrical power, control systems, and control powers Preferred Qualifications Ability to perform basic welding Work history in the past 12 months Able to operate forklift and other motorized equipment Program PLC's using schematics and ladder logic Completed industrial maintenance certification program Minimum of 1 year maintenance with proven preventative maintenance (PM's) experience in a manufacturing facility Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
    $27-36.3 hourly 1d ago
  • Maintenance Mechanic

    Cargill 4.7company rating

    Jarrell, TX jobs

    New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TX Job Type: Full Time Shift(s) Available: 2nd & 3rd Compensation: $27.00/hr - $36.25/hr Sign on Bonus: $3.000 Benefits Information Overtime Potential Holiday Pay Paid time off after 30 days Health Insurance (Medical, Dental, & Vision) 401(k) Retirement Plan Tuition Reimbursement Life Insurance and Short-Term Disability Career Development Opportunities Employee Discounts Principal Accountabilities Using hand tools to perform maintenance on production machinery Ensuring food safety and quality Cleanliness and housekeeping Responding to radio calls from other departments (production, food safety, safety, etc) for maintenance related actions Communicating with other departments and other maintenance shifts to ensure proper pass down of maintenance related issues to the next shift Documenting daily work assigned on paper and also in the maintenance management system (SAP) Troubleshoot and repair complex problems on all production equipment Utilize parts in inventory to repair equipment and follow procedures in documenting what is issued out Identify problems and make suggestions to improve operational processes PM from required section Contact equipment vendors to assist in troubleshooting issues, researching parts needed, and requesting quotes for parts Must be able to learn and use SAP to document work hours, search for parts, and generate work orders Perform advanced preventative maintenance (PM's) on plant equipment Use measuring devices accurately (metric and standard). Use multimeters, megohmmeters, and any other test equipment needed to aid in troubleshooting and repair of equipment 2 year maintenance experience in a manufacturing facility Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Able to perform physical tasks (kneeling, bending, climbing), work in elevated areas (4ft and above) and able to lift up to 50 lbs with or without reasonable accommodations Ability to read, write, and speak English Ability to use tools and work on mechanical and pneumatic components Able to perform basic computer skills Ability to troubleshoot electrical power, control systems, and control powers Preferred Qualifications Ability to perform basic welding Work history in the past 12 months Able to operate forklift and other motorized equipment Program PLC's using schematics and ladder logic Completed industrial maintenance certification program Minimum of 1 year maintenance with proven preventative maintenance (PM's) experience in a manufacturing facility Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
    $27-36.3 hourly 1d ago
  • Maintenance Mechanic

    Cargill 4.7company rating

    Killeen, TX jobs

    New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TX Job Type: Full Time Shift(s) Available: 2nd & 3rd Compensation: $27.00/hr - $36.25/hr Sign on Bonus: $3.000 Benefits Information Overtime Potential Holiday Pay Paid time off after 30 days Health Insurance (Medical, Dental, & Vision) 401(k) Retirement Plan Tuition Reimbursement Life Insurance and Short-Term Disability Career Development Opportunities Employee Discounts Principal Accountabilities Using hand tools to perform maintenance on production machinery Ensuring food safety and quality Cleanliness and housekeeping Responding to radio calls from other departments (production, food safety, safety, etc) for maintenance related actions Communicating with other departments and other maintenance shifts to ensure proper pass down of maintenance related issues to the next shift Documenting daily work assigned on paper and also in the maintenance management system (SAP) Troubleshoot and repair complex problems on all production equipment Utilize parts in inventory to repair equipment and follow procedures in documenting what is issued out Identify problems and make suggestions to improve operational processes PM from required section Contact equipment vendors to assist in troubleshooting issues, researching parts needed, and requesting quotes for parts Must be able to learn and use SAP to document work hours, search for parts, and generate work orders Perform advanced preventative maintenance (PM's) on plant equipment Use measuring devices accurately (metric and standard). Use multimeters, megohmmeters, and any other test equipment needed to aid in troubleshooting and repair of equipment 2 year maintenance experience in a manufacturing facility Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Able to perform physical tasks (kneeling, bending, climbing), work in elevated areas (4ft and above) and able to lift up to 50 lbs with or without reasonable accommodations Ability to read, write, and speak English Ability to use tools and work on mechanical and pneumatic components Able to perform basic computer skills Ability to troubleshoot electrical power, control systems, and control powers Preferred Qualifications Ability to perform basic welding Work history in the past 12 months Able to operate forklift and other motorized equipment Program PLC's using schematics and ladder logic Completed industrial maintenance certification program Minimum of 1 year maintenance with proven preventative maintenance (PM's) experience in a manufacturing facility Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
    $27-36.3 hourly 1d ago
  • Maintenance Technician

    Cargill 4.7company rating

    Pflugerville, TX jobs

    New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TX Job Type: Full Time Shift(s) Available: 2nd & 3rd Compensation: $27.00/hr - $36.25/hr Sign on Bonus: $3.000 Benefits Information Overtime Potential Holiday Pay Paid time off after 30 days Health Insurance (Medical, Dental, & Vision) 401(k) Retirement Plan Tuition Reimbursement Life Insurance and Short-Term Disability Career Development Opportunities Employee Discounts Principal Accountabilities Using hand tools to perform maintenance on production machinery Ensuring food safety and quality Cleanliness and housekeeping Responding to radio calls from other departments (production, food safety, safety, etc) for maintenance related actions Communicating with other departments and other maintenance shifts to ensure proper pass down of maintenance related issues to the next shift Documenting daily work assigned on paper and also in the maintenance management system (SAP) Troubleshoot and repair complex problems on all production equipment Utilize parts in inventory to repair equipment and follow procedures in documenting what is issued out Identify problems and make suggestions to improve operational processes PM from required section Contact equipment vendors to assist in troubleshooting issues, researching parts needed, and requesting quotes for parts Must be able to learn and use SAP to document work hours, search for parts, and generate work orders Perform advanced preventative maintenance (PM's) on plant equipment Use measuring devices accurately (metric and standard). Use multimeters, megohmmeters, and any other test equipment needed to aid in troubleshooting and repair of equipment 2 year maintenance experience in a manufacturing facility Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Able to perform physical tasks (kneeling, bending, climbing), work in elevated areas (4ft and above) and able to lift up to 50 lbs with or without reasonable accommodations Ability to read, write, and speak English Ability to use tools and work on mechanical and pneumatic components Able to perform basic computer skills Ability to troubleshoot electrical power, control systems, and control powers Preferred Qualifications Ability to perform basic welding Work history in the past 12 months Able to operate forklift and other motorized equipment Program PLC's using schematics and ladder logic Completed industrial maintenance certification program Minimum of 1 year maintenance with proven preventative maintenance (PM's) experience in a manufacturing facility Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.
    $27-36.3 hourly 1d ago
  • Maintenance Technician

    Cargill 4.7company rating

    Round Rock, TX jobs

    New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Round Rock, TX Job Type: Full Time Shift(s) Available: 2nd & 3rd Compensation: $27.00/hr - $36.25/hr Sign on Bonus: $3.000 Benefits Information Overtime Potential Holiday Pay Paid time off after 30 days Health Insurance (Medical, Dental, & Vision) 401(k) Retirement Plan Tuition Reimbursement Life Insurance and Short-Term Disability Career Development Opportunities Employee Discounts Principal Accountabilities Using hand tools to perform maintenance on production machinery Ensuring food safety and quality Cleanliness and housekeeping Responding to radio calls from other departments (production, food safety, safety, etc) for maintenance related actions Communicating with other departments and other maintenance shifts to ensure proper pass down of maintenance related issues to the next shift Documenting daily work assigned on paper and also in the maintenance management system (SAP) Troubleshoot and repair complex problems on all production equipment Utilize parts in inventory to repair equipment and follow procedures in documenting what is issued out Identify problems and make suggestions to improve operational processes PM from required section Contact equipment vendors to assist in troubleshooting issues, researching parts needed, and requesting quotes for parts Must be able to learn and use SAP to document work hours, search for parts, and generate work orders Perform advanced preventative maintenance (PM's) on plant equipment Use measuring devices accurately (metric and standard). Use multimeters, megohmmeters, and any other test equipment needed to aid in troubleshooting and repair of equipment 2 year maintenance experience in a manufacturing facility Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Able to perform physical tasks (kneeling, bending, climbing), work in elevated areas (4ft and above) and able to lift up to 50 lbs with or without reasonable accommodations Ability to read, write, and speak English Ability to use tools and work on mechanical and pneumatic components Able to perform basic computer skills Ability to troubleshoot electrical power, control systems, and control powers Preferred Qualifications Ability to perform basic welding Work history in the past 12 months Able to operate forklift and other motorized equipment Program PLC's using schematics and ladder logic Completed industrial maintenance certification program Minimum of 1 year maintenance with proven preventative maintenance (PM's) experience in a manufacturing facility Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet
    $27-36.3 hourly 60d+ ago
  • Maintenance Technician 1A

    Cargill 4.7company rating

    Waco, TX jobs

    New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Waco, TX Job Type: Full Time Shift(s) Available: 2nd Compensation: $28.30/hr Benefits Information Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Completing preventative, predictive, and reactive industrial maintenance throughout the facility Operating standard maintenance tools such as power tools, basic hand tools, electric tools, precision maintenance tools, preventative maintenance technology tools, etc Utilize and work with maintenance trades and components such as advance electrical, advance welding, pipefitting, gearbox and bearing maintenance, lubrication, pumps and piping systems, mechanical maintenance, hydraulic and pneumatic systems. By following instructions on maintenance manuals to re-build equipment by reading and comprehending electrical/mechanical schematics, blueprints, and/or operation manuals. Reliability (level 1 PdM tech) Documenting completed work and the conditions found, utilizing maintenance computer software as necessary Interacting regularly with peers and management to pursue continuous improvement of facility operations and promote a teamwork focused environment Operating forklifts, loaders, scissor lifts, and aerial lifts Understanding and adhering to all safety policies and procedures Maintaining a safe and clean work environment Required Qualifications Must be eligible to work in the United States without visa sponsorship Must be 18 years or older Prior maintenance knowledge and experience Read and write English Please note that this position does not include relocation reimbursement. Equal Opportunity Employer, including Disability/Vet
    $28.3 hourly 13d ago

Learn more about Pilgrim's jobs

View all jobs