Pipefitter/welder jobs near me - 132 jobs

Starting Wage: $43.24/hr Medical, Dental, Vision Benefits - Day 1 - Zero Premiums Must be a Journeyman with a 4-Year State-approved apprenticeship or 8 years of documented experience in the Trade Ability to work any shift Perform all installation, repair and maintenance work of refrigeration and air-conditioning equipment, including cold rooms and tropic rooms to simulate extreme conditions of cold and heat and other atmospheric conditions for test purposes. Install and maintain steam and hot water heating systems, high pressure steam line, sprinkler systems and piping systems for air, oil, gas, paint, acids, solvents, etc., including pump and collectors. Cut threads, bend, file, burr, ream and install pipes, couplings, unions, elbows, flanges, valves, etc. Work with cast iron, brass, stainless steel, and other types of metal piping, valves, traps and vessels. Use all types of pipe fitters, tools including taps, portable power pipe threaders, gas torches, hacksaws, drills, benders, etc. Lay out, install and repair all plant plumbing systems, including toilets, showers and drinking fountains, according to underwriters and municipal standards. Locate, diagnose and correct plumbing troubles. May be required to handle/manage hazardous waste from time to time. Requirements: Must have high school diploma or equivalent (GED). Must be at least 18 years of age or older. Must have completed an apprenticeship program or have 8 years of documented experience in the trade. Must have HVAC maintenance / repair experience; HVAC certification preferred. Must be U. S. citizen. Must be able to obtain / maintain security clearance. Use all trade tools and equipment including pipe cutters, threaders, benders, soldering irons, hack saws, blow torches, 'snakes', caulking tools, etc., and work with various types of metallic, vitreous and plastic materials. Must have ability to read and work from blueprints. Must be able to successfully complete the pre-employment process including drug screen and background check. Must obtain Department of Army Police unescorted access. Must have current state driver's license in order obtain in-plant licenses to operate motorized vehicle including man lifts, forklifts, etc. Operate crane (up to 50 tons) Environmental Conditions: Ability to work in production environment, including: Climbing stairs, ladders and equipment. Work from ladders scaffolds or swing stages when necessary. Lift and carry- minimum of 40#, Working in inclement weather including extreme heat and cold. Working in confined spaces. Working in areas with a high noise volume. Must be able to wear personal protective clothing and equipment. Must be able to wear respirator. Must be able to bend, stoop, kneel and crawl. Must be able to work aloft- cannot be afraid of heights. Working in areas with dust and fumes. Must be able / willing to work any shift as assigned. Must be able/willing to work overtime as required. Headquartered in Reston, Virginia, General Dynamics is a global aerospace and defense company offering a broad portfolio of products and services in business aviation; ship construction and repair; land combat vehicles, weapons systems and munitions; and technology products and services. General Dynamics employs more than 100,000 people across 65 countries worldwide and in all 50 U.S. states, more information is available at *********** General Dynamics Land Systems, is a business unit of General Dynamics, and is an innovative leader of ground combat systems' equipment and software for our clients. Our performance-driven team partners with the U.S. Army, U.S. Marine Corp and other militaries across the Globe to ensure that next generation ground combat vehicles are ready to protect our fighting men and women in uniform. General Dynamics Lands Systems provides a competitive compensation package, site specific flexible work schedules, 401(k) with Company Match; Bonus Eligibility, Employee Development Opportunities, Tuition Reimbursement, On-site Amenities, and comprehensive Medical/Dental/Vision Insurance. As an Equal Opportunity Employer, General Dynamics Land Systems ("GDLS") provides all persons with equal opportunity and access to all aspects of employment process, without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, marital status, age, disability, status as a protected veteran, or membership in any group protected by federal, state, or local anti-discrimination laws. GDLS also is committed to providing reasonable accommodations to individuals with disabilities and disabled veterans.. If, due to a disability, you need an accommodation to search or apply for an opportunity with GDLS, please call ************ or send an e-mail to ***************** for assistance and let us know the nature of your request and your contact information. Share: mail Tweetshare to twitter Share on Facebookshare to facebook Share on LinkedInshare to linkedin Apply Now Similar Jobs Interested in working for Land Systems? Join our Talent Network Today! Join our Talent Network * Search Jobs * Saved Jobs * Careers Home facebook twitter linkedin youtube instagram 2026 General Dynamics US. All rights reserved.

Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: Read blueprints and other customer specifications/drawings. Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG). 6GR Requirements Minimum 8 years of naval/commercial welding experience. Must have reliable transportation. Familiar with OSHA regulations relative to the shipbuilding industry. Pass hair follicle test and background check. Comfortable with heights and in confined spaces. Lift 50lbs without assistance. Must understand the layout of the ship and compartment identification. Basic reading, writing and math skills required. Must be a US citizen. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Rate of Pay and Benefits: Plumber Pipefitters are paid a top hourly base rate of $42.195, plus applicable shift, overtime, and holiday premiums. The starting rate for this position is $41.995 with pay increases to the top rate upon completion of three consecutive months of employment. Benefits: Immediate access to Best-in-Class Company provided healthcare! Company provided premium coverage for Hospital-Surgical-Medical plus Drug, Hearing, Dental, and Vision. Basic Life Insurance and Accidental Death and Dismemberment Insurance. Accident and Sickness and Extended Disability Benefits. Automatic enrollment in TESPHE, the hourly employee 401(k) plan, at an initial pre-tax contribution rate of 3%. Also eligible for Company TESPHE contributions of 10% of base pay and $1 per compensated hour. Eligible for holiday pay, profit sharing and lump sum bonuses, paid time off, tuition assistance, and immediate vehicle discount purchase plans. Candidates must have completed a bona fide apprenticeship, or have 8 years of previous experience, or have a combination of previous work experience and training equivalent to a bona fide apprenticeship program in the trade. Knowledge and work experience in blueprint reading and layout , pneumatic, fluid, and steam systems, fabrication of pipe systems, pipe, mechanical gas arc, and plasma cutting, lifting and rigging and valve installation and repair. Successful completion of a job interview, pre-employment drug screen, physical, and background check are required. Drug panel does not include THC. Ford Motor Company is an equal opportunity employer committed to a culturally diverse workforce. All qualified applicants will receive consideration for employment without regard to race, religion, color, age, sex, national origin, sexual orientation, gender identity, disability status, or protected veteran status. Willingness and ability to work on an assigned schedule, change shifts periodically, work more than 8 hours per day and/or work overtime, while maintaining good attendance. Ability and willingness to learn and follow safety rules and procedures. Ability to perform tasks of the trade, stand for extended periods, walk unassisted, work at heights, work overhead including on ladders and platforms and manipulate tools typical of the trade. Tasks will require a certain amount of reaching, lifting, twisting, bending, and use of a PMHV or hilo. Ability to perceive differences in details and prints related to trade. Must be able to effectively maneuver about vehicles, equipment, assembly lines or stations, and about facility. Ability to learn, remember, and maintain pace of steps involved in performing a job after instruction, training, and familiarization with the tasks. Ability and willingness to understand and follow instructions, both oral or in writing. Ability and willingness to work in a team environment, including helping co-workers, maintaining and promoting a safe work environment, treating co-workers with dignity and respect regardless of personal differences, and accepting and following instructions and requests from leadership.

Job Opportunity: Pipe Welder Pay: $36 per hour Are you an experienced Pipe Welder looking to take the next step in your career? Join our team in Cincinnati! Key Responsibilities: Read and interpret blueprints Perform high-quality TIG and Stick welding on steel pipe Work independently and collaboratively within a team Ensure compliance with safety standards Qualifications: Minimum of 2 years of verifiable TIG and Stick welding experience Strong blueprint reading skills Mechanical and industrial experience Ability to work overtime when required If you're ready to contribute your skills and grow with us, apply today! Job Type: Full-time Pay: $36 Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance Schedule: 10 hour shift 8 hour shift Monday to Friday Overtime Weekends as needed Ability to Commute: Cincinnati, OH (Required) Work Location: In person

Experienced Pipefitters Needed - Dayton, OH | $34-$36 + $120 Per Diem United Trades of America is now hiring experienced Pipefitters for an industrial project located in Dayton, Ohio. This is an excellent opportunity for individuals who are confident in their skills, especially when it comes to operating and setting up a thread machine. We're looking for reliable, detail-oriented tradespeople who don't need direction when it comes to the basics-if you know your way around a threader and can square and level with precision, we want to hear from you. Key Responsibilities: Set up and operate a thread machine with no instruction or guidance. Cut, thread, and install pipe to required specifications using tools such as saws, pipe threaders, benders, and hand tools. Square and level pipe installations for alignment and accuracy. Interpret drawings and follow project specifications for layout and installation. Participate in a basic on-site fitter test before assignment. Ensure a clean and safe work environment at all times. What This Job Is NOT: There is no welding involved on this project. This is not a training position - candidates must already have the skill set required to start work with minimal oversight. Qualifications: Minimum 3-5 years of pipefitting experience, specifically with threading operations. Proficient in squaring, leveling, and reading basic drawings or blueprints. Strong understanding of pipe systems and installation standards. Ability to work independently and take initiative without requiring step-by-step instruction. Must be able to pass a basic fitter test on-site. Must have reliable transportation and be ready to work. Must be able to pass a pre-employment drug screen and background check. Compensation & Schedule: Pay Rate: $34.00 - $36.00 per hour (based on experience) Per Diem: $120.00 per day worked Schedule: Full-time hours Why Work with United Trades of America? We are a trusted name in skilled trades staffing across the country, placing dependable workers with quality contractors. We understand the importance of matching experienced professionals with jobs that respect their skill sets and pay them fairly. If you're tired of short-term gigs with no consistency or respect for your time, we offer a better path forward. This job is best suited for pipefitters who are already familiar with the setup and operation of a thread machine and are comfortable executing their work independently without supervision. If you're confident in your skills and looking to earn a great wage with daily per diem, this job is for you. To Apply: Submit your resume to ***************************** Or visit us online at ***************************

Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects type and size of pipe or other related materials and equipment according to specifications. - Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. - May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. - Lays out, positions, aligns and fits components together in various body positions. - Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. - Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. - Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. - Starts power supply to produce electric current. - Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. - Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. - May manually apply filler rod to supply weld metal. - May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. - May repair broken or cracked parts and fill holes. - May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. - May preheat work piece, using hand torch or heating furnace. - May cut metal plates or structural shapes. - Examines weld for bead size and other specifications. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of materials and work pieces during installation. - Performs minor maintenance or cleaning activities of tools and equipment. - Assists other mechanics as needed. - Respiratory protection is common and may be required. - Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. - Responsible for observing and complying with all safety and project rules. Performs other duties as required.

Labor One is currently hiring Pipe Welders in San Diego, CA at a Shipyard. Job Requirements: Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime. Pipe Welding Assessment: FCAW Fillet weld plates: · 2F 3F 4F (VT test) *Fillet testing shall take 1-2 hours Steel backing butt joint 6X6 3/8” thick: · 2G 3G 4G (VT and UT test ) *All Butt joint testing takes a welder an average of 1-2 days Butt joint with ceramic backing 12X8 ¾” thick: · 1G 2G 3G (VT and UT test) *All Butt joint testing takes a welder an average of 1-2 days Simulation: · Wraps 2F 3F 36” in length · Diagonal 3F 4F 36” in length · In and out corners 2F 4F 6” · Water tight collar · Air arc fillet welds (VT testing) *All simulation testing takes average welder 1-2 days GTAW Pipe welding assessment · 6G position - 2.5 “copper nickel pipe butt joint schedule 40 (VT and bent test) · 5F, 4F position - 3” copper nickel pipe sleeve 200 (VT and macro etch test) · 5F, 4Fposition - 1” mild steel pipe schedule socket weld 40 (VT and macro etch test) *All pipe testing takes average welder 1-2 days

We are seeking a skilled Combo Pipe Welder / Fitter to join our team. This is a long term position. As a Pipe Welder, you will be responsible for welding and fabricating metal components to assemble pipelines in various settings. - Interpret and analyze blueprints to understand project specifications - Measure and mark pipes for cutting and welding - Weld pipes using various techniques such as stick welding - Inspect welds to ensure they meet quality standards - Conduct repairs on existing pipelines as needed - Collaborate with other team members to complete projects efficiently *Skills* - Proficiency in reading and interpreting blueprints for pipe layout and welding specifications - Knowledge of codes standards related to pipe welding - Mechanical knowledge for equipment setup and maintenance - Ability to perform basic math calculations for measurements and material estimates - Familiarity with construction site safety protocols - Competency in using calipers for precise measurements

General Description: Feldkamp Enterprises, a Marsden Holding Company, is seeking a skilled Journeyman Pipefitter to join our team. A Journeyman Pipefitter is responsible for working on jobsites assigned by their Project Manager. The ideal candidate will have solid experience in commercial pipe layout and installation, ability to work independently, troubleshoot effectively, and deliver high-quality craftsmanship. Pipefitter will be required to work directly under the Field Foreman and be responsible for training and leading Apprentices and Helper level staff members assigned to their jobsite. Key responsibilities include, but are not limited to: Key Responsibilities: Assemble and install piping systems for commercial buildings. Read and interpret blueprints, mechanical drawings, and specifications. Measure, cut, groove, thread, weld, and join several types of pipes (copper, cast iron, PVC, PEX, Etc.) Bend pipe by hand or with pipe-bending tools and machine. Install hangers and supports. Test piping systems for leaks by increasing pressure in pipes and observing gauges attached to pipes for indication of leaks. Troubleshoot installation issues and provide solutions to maintain quality and project timelines. Other duties assigned. Qualifications: 3-5+ years of experience in commercial pipefitting and welding. Journeyman License. OSHA 10 or 30 Certification. VRF certification is preferred. Ability to read and interpret blueprints. Ability to weld in all positions (standing, kneeling, etc.) Ability to sweat and braze. Ability to use roll groove machine. Ability to work at heights. For safety reasons, basic English proficiency is required. A pre-employment drug screen is required. Valid driver's license and reliable transportation. Have a general understanding of hand tools (tape measure, pipe wrenches, hammers, screw drivers, etc.). Must have the ability to work with, train, and lead Apprentices and Helper level staff members. Operate in a safe manner and follow all safety requirements (wear proper PPE, keep worksite organized, safe, and free of hazards). Why Join the Feldkamp Enterprises? Feldkamp Enterprises, a Marsden Holding Company, is a non-union Mechanical Contractor in Cincinnati, OH. Our company is made up of a team of professionals skilled in the fields of commercial and industrial HVAC, retrofit, and installation. Room to Grow We are an established organization. Full time benefits available including 401k. AAP/EEO Statement Feldkamp Enterprises provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, creed, ancestry, sexual or affectional orientation, marital or veteran status, color, religion, sex, national origin, age, disability, genetics, status regarding public assistance or any characteristic protected under federal, state, or local law.

Welder / Fitters Needed in Columbus, Ohio A national company with a facility in the Columbus, Ohio area is currently seeking several Welder / Fitters for opportunities with their growing team. The position is a Direct Hire opportunity that offers long-term stable employment, opportunities for growth, and great benefits. Welder / Fitters rates are anticipated to start between $25 to $30 an hour based on each candidate's experience and education. All well-qualified candidates will be considered regardless of pay rate. We offer excellent benefits including great medical, dental, and Vision. Qualified Welder / Fitters will have most, if not all of the following skills and experience: 3+ years of MIG Welding, fitting, tacking, and welding steel components per blueprints and welding symbols using MIG welding and related fabrication tools. Must setup welding equipment, perform precision layouts, and ensure welds meet AWS D1.1 standards. Inspect parts for accuracy and quality; prepare and finish workpieces using grinders or other tools. Ability to pass AWS D1.1 3G weld qualification; blueprint reading skills required. Forklift and overhead crane experience. Must be able to work in the United States (No H-1 sponsorship or student visas considered). Must be able to complete standard pre-hire checks including background, drug screen, references, etc.

Job Description Together We Build - Partnership, Innovation, Excellence, and Safety At Kelso Industries, 3,500+ employees across 30 companies work together to deliver exceptional HVAC, mechanical, plumbing, refrigeration, and electrical solutions nationwide. Join us to grow your career, make an impact, and be part of a team where innovation, excellence, and safety come first. Recruiter Notice: We respectfully ask external recruiters and staffing agencies not to submit candidates. We only accept direct applications. Summary: Feldkamp Mechanical is seeking a skilled and dedicated Pipefitter to join our dynamic team. This position involves the installation, maintenance, and repair of boiler piping and related equipment, including layout and welding of piping systems for steam, condensate, hydronic, and process piping. The role also includes potential boiler repair work, contributing to a variety of industrial and commercial projects. If you thrive in a hands-on environment and are passionate about your craft, this role offers a unique opportunity to excel. Responsibilities: Perform welding and pipefitting tasks according to specifications and safety guidelines. Cut, shape, and fit pipes to appropriate measurements. Assemble and install pipes, valves, and fixtures. Inspect and test installed systems for functionality and quality. Identify and troubleshoot issues with piping systems. Collaborate with team members to ensure efficient project completion. Maintain documentation of work performed and materials used. Inspect the workplace, clear obstructions, and prepare materials and equipment. Maintain knowledge of hazard prevention and safety best practices. Perform other duties as assigned. Qualifications: High School Diploma or equivalent required . Experience as a welder/pipefitter in the HVAC industry preferred . Knowledge of pipefitting principles and ability to read and interpret blueprints and technical drawings. Strong attention to detail and accuracy. Solid understanding of safety protocols and procedures. Ability to work effectively in a team environment. Excellent time management and organizational skills. Physical stamina to perform manual labor and work in various weather conditions. Able to lift 50 pounds; frequently lift and carry 25 pounds; work on ladders, staging or other related equipment; and work in confined spaces. Must use proper LO/TO procedures and wear PPE at all times. Ability to Relocate: Lexington, KY 40506: Relocate before starting work (Required) WORK ENVIRONMENT AND EXPECTATIONS Some job duties are performed within an established office environment under normal lighting and climate-controlled tolerances. The noise level in the work environment is usually low to moderate. When the employee is at a work site, the employee is regularly exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places and outdoor weather conditions. The noise in the work environment is often loud. Requires a consistent physical presence at the branch office to oversee shared services functions and employees, normally achieved by working standard business hours. Certain positions will require flexibility of working hours to meet the demands of the job and the direction of the manager. The work environments are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL REQUIREMENTS Prolonged periods of standing and walking. Requires lifting, positioning, pushing, and/or pulling. Frequently reaching, stooping, bending, kneeling, and crouching. Prolonged periods sitting at a desk and working on a computer. Must be able to lift at least 50 pounds at times. Why Join Kelso Industries? Join us and be part of a team dedicated to creating efficient, sustainable, and high-performance environments that make a lasting impact across the industrial, commercial, and institutional sectors. Here you will experience: Growth Opportunities: Develop new skills, take on exciting challenges, and advance your career in meaningful ways. Company Culture: You'll thrive in an environment that supports your growth, values your contributions, and makes work fulfilling and enjoyable. Impact: Your work directly contributes to meaningful outcomes, allowing you to see the difference you make and feel a sense of purpose every day. Competitive Compensation & Benefits: You'll be rewarded fairly for your contributions while enjoying perks that enhance your financial security, health, and overall well-being. Kelso Industries celebrates diversity and is committed to creating an inclusive environment for all employees. We do not discriminate in any aspect of employment based on race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity and/or expression, age, veteran status, disability, or any other characteristic protected by federal, state, or local employment discrimination laws where Kelso does business

Location: Cincinnati, OH Employment Type: 1st Shift, Full-time, temp-to-hire Job Brief Kable Workforce Solutions is hiring a Journeyman Welder for our client. This job is responsible for performing welding operations to meet quality and production requirements, troubleshooting and reworking weld defects, diagnosing and restoring welding equipment functionality, supporting production by minimizing downtime, and maintaining a safe, clean, and organized work area.What's a Typical Day Like? Perform welding operations in accordance with quality and production requirements. Identify and troubleshoot flight-weld issues to ensure product quality and process stability. Perform weld rework as needed to correct defects and meet specifications. Diagnose welding equipment issues and restore equipment functionality efficiently to maintain production flow. Support production by minimizing downtime through quick problem identification and resolution. Maintain a safe, clean, and organized work area. Perform other duties as assigned. What Are the Requirements of the Job? Journeyman Welder certification preferred or equivalent demonstrated welding experience. Proven ability to troubleshoot welding defects and perform rework. Experience diagnosing welding equipment issues and returning equipment to service. Welding experience or a related technical/mechanical background demonstrating strong aptitude and ability to develop skills quickly. Strong attention to detail and commitment to quality. Reliable, dependable, and able to work effectively in a production environment. Ability to work in fast-paced environment. Ability to move or lift up to 50+ lbs. Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel. Ability to utilize hand/eye coordination. Capability to stand for prolonged periods of time Communication skills. Why Choose Kable Workforce Solutions? Weekly Pay Exclusive Access Opportunities to V.I.P. Vault Day 1 Benefits Various Bonus Opportunities Eligibility for Employee of the Month Rewards How to Apply And Next Steps? Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.

Job Description Welder / Fitters Needed in Columbus, Ohio A national company with a facility in the Columbus, Ohio area is currently seeking several Welder / Fitters for opportunities with their growing team. The position is a Direct Hire opportunity that offers long-term stable employment, opportunities for growth, and great benefits. Welder / Fitters rates are anticipated to start between $25 to $30 an hour based on each candidate's experience and education. All well-qualified candidates will be considered regardless of pay rate. We offer excellent benefits including great medical, dental, and Vision. Qualified Welder / Fitters will have most, if not all of the following skills and experience: 3+ years of MIG Welding, fitting, tacking, and welding steel components per blueprints and welding symbols using MIG welding and related fabrication tools. Must setup welding equipment, perform precision layouts, and ensure welds meet AWS D1.1 standards. Inspect parts for accuracy and quality; prepare and finish workpieces using grinders or other tools. Ability to pass AWS D1.1 3G weld qualification; blueprint reading skills required. Forklift and overhead crane experience. Must be able to work in the United States (No H-1 sponsorship or student visas considered). Must be able to complete standard pre-hire checks including background, drug screen, references, etc.

Fits and welds fabricated, cast and forged components to assembly by performing the following duties. RESPONSIBILITIES * Fit up parts prior to weld. * MIG or TIG various parts in different material types. * Conduct dimensional inspections of parts and check quality requirements. * Personally, conduct all quality checks before moving to Quality Department. * Understand and interpret prints and technical drawings. * Grinding, sanding and cutting using a plasma cutter, as required. * Adhere to Lean Manufacturing initiatives, quality requirements and all safety programs. * Bluco * Advance position qualification (minimum 3G) * Multi-pass certification * Oxy/Fuel or Plasma * Robot Operator * Spot Weld SUPERVISORY RESPONSIBILITIES * None EDUCATION and/or EXPERIENCE * High school diploma or GED. * Demonstrated success is fit-up of parts to be welded. * Math and blueprint skills. * Self-starter, capable of completing task(s) with minimal supervision. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand; use hands to finger, handle, or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to walk, climb or balance, and talk or hear. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally move up to 100 pounds. Specific vision abilities required by this job include close, distance, color, and peripheral vision as well as the ability to focus. .

Job Type: Full-time Shifts: 4 - 10 hour shifts, Monday - Thursday, 6:00 am - 4:30 pm Company: Farber Specialty Vehicles About Us: Farber Specialty Vehicles is an industry leader in the design, development, and manufacturing of custom vehicles. Our clients include some of the largest law enforcement agencies, hospital groups, and universities across North America and around the world. We offer flexible work hours with 10-hour days, allowing you to enjoy long weekends with our 4-day workweek. We value your experience and pay accordingly. Apply today to find out what your starting rate would be. Responsibilities: As a Fabricator and Welder at Farber Specialty Vehicles, you will be responsible for the fabrication, welding, and assembly of specialty vehicles. Your duties will include but are not limited to: Reading blueprint layouts and engineering drawings. Fabricating materials to specifications. Laying out and building assemblies, including generators, slide-out rooms, and hydraulic leveling jacks. Setting up welding equipment. Qualifications Knowledge, Skills & Abilities: We welcome candidates with diverse backgrounds and experience levels. While manufacturing experience is a plus, it is not required. We are looking for individuals who possess the following skills and abilities: Competency with a variety of power tools such as drills, jig saws, rivet guns, etc. Knowledge of machine operation, cutting, sawing, drilling, and grinding parts is desirable. Experience using MIG and TIG equipment is a plus (not required for fabricators and installers). A high sense of urgency to meet all production goals accurately. Knowledge of relevant safety standards and a willingness to use personal protective equipment. Physical capability to stand, walk, bend, push, and pull throughout a 10-hour shift. Ability to lift 25-50 lbs. Benefits at Farber: Vacation Paid Holidays Personal Days Health Insurance Dental Insurance Vision Insurance Life Insurance Accidental Death and Dismemberment (AD&D) Long Term Disability (LTD) Short Term Disability (STD) 401k with Match Profit Sharing About Farber Specialty Vehicles: Farber Specialty Vehicles has a team of over 150 full-time employees utilizing the latest technology to design and build custom specialty vehicles. All vehicles are custom-designed by a team of electrical and mechanical engineers and manufactured to meet the customer's unique needs. AutoCAD and SolidWorks computer-aided design software are used to design interiors as well as body shells. The factory includes the most up-to-date CNC, machine press, and HVAC equipment in the industry. FSV custom manufactures on many different platforms, including Freightliner, International, Ford, Prevost, and Sprinter. Our broad scope of work includes emergency management, medical, laboratories, and educational vehicles. Quality is assured with ISO certification. Farber Specialty Vehicles takes affirmative action to ensure equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, protected veteran status or other legally protected characteristics.

Weld Technician - 3rd Shift (10pm-6am) | Cleveland, OH | OT Eligible Join our team as a Weld Technician and play a critical role in keeping our welding and laser-scanning systems running at peak performance. This is a hands-on, technical role where you'll support production, train operators, troubleshoot robotics, and develop weld/Perceptron programs that drive our success. What You'll Do Support daily welding and laser-scanning operations Train new operators on robotic weld equipment and processes Troubleshoot weld programs, robotics (Motoman MRC/XRC/NX/DX/YRC), and fixtures Develop and maintain weld and laser programs (Perceptron) Partner with Engineering, Quality, and Maintenance teams to solve challenges Ensure compliance with ISO, TS16949, PPAP, PFMEA, and GD&T standards Uphold workplace safety and quality at all times What You'll Bring 4+ years of welding or manufacturing experience Hands-on experience with Motoman robot controllers Strong troubleshooting skills across mechanical, electrical, and pneumatic systems Familiarity with PPAP, PFMEA, GD&T, and ISO standards Ability to lift 30 lbs and work on your feet for extended periods Team-focused attitude with a drive for continuous improvement Why Join Us Competitive salary (non-exempt) - eligible for overtime pay Stable 3rd shift schedule (10pm-6am) Work with advanced robotic welding & scanning technology Supportive team environment with opportunities for career growth in advanced manufacturing Help us build the future, one weld at a time - apply today!

General Description: The Weld Technician supports welding operations by maintaining weld process stability, performing inspections and testing, and assisting with troubleshooting and continuous improvement activities. This role ensures weld quality meets internal standards and customer requirements through hands-on technical support, testing, and inspection. The weld technician will report to the Customer Quality Manager. Responsibilities: * Support and follow the Company Safety Program * Support daily welding operations (MIG, TIG, Resistance, or Robotic welding as applicable) * Set up, adjust, and troubleshoot welding equipment, tooling, and fixtures * Perform cut and etch inspections to evaluate weld penetration, fusion, and nugget size * Conduct destructive weld testing (peel tests, chisel tests, torque/tension tests, macro-etch samples, etc.) * Perform basic nondestructive testing and inspections such as visual inspection, dye penetrant, and magnetic particle (as applicable) * Interpret inspection results and identify weld defects or process deviations * Assist with corrective actions and process improvements based on inspection findings * Read and interpret blueprints, weld symbols, and inspection standards * Support weld process validation, trials, and customer or internal audits * Maintain accurate records of inspection results, weld parameters, and test data * Follow all safety, quality, and production requirements * Maintain & produce Red Rabbits at cell Preferred Qualifications: * High school diploma or equivalent * Weld certification (AWS or equivalent) - desired * Working knowledge of welding processes and materials * Experience using a microscope / software * Strong mechanical aptitude with the ability to troubleshoot equipment and processes * Attention to detail * Ability to work in a manufacturing environment and support production needs * Ability to lift 40+ pounds Job Location: Supports the Gerstco Manufacturing Group with some travel as required.

🚨 NOW HIRING - IMMEDIATE OPENINGS 🚨 We Staff Better We Staff Better is actively hiring for multiple in-demand positions with competitive pay, full-time schedules, and benefits starting Day 1 . If you're ready to work, we're ready to place you! 🔧 Multicraft Technician (Electrical Focus) 💲 $25.87/hr 🕒 Flexible Schedule Looking for an experienced Multicraft Technician with a strong 480V+ electrical background . This role involves troubleshooting motors, panels, controls, and production equipment, reading schematics, performing PMs, and handling light mechanical work. Industrial or manufacturing experience required. Safety-focused candidates only. 📞 Inside Sales / Receptionist 💲 $15/hr 🕗 Monday-Friday | 8:00 AM-5:00 PM Front desk and inside sales support position. Responsibilities include greeting customers, managing phone calls, entering orders, assisting the sales team, and general office duties. Customer service skills required; sales or office experience preferred. 🔥 Welders 💲 $18/hr 🕡 Monday-Friday | 6:30 AM-2:00 PM We're hiring welders at multiple experience levels! Whether you're TIG, Stick, or newly certified, we have opportunities available. Welding test required on Day 1. Industrial or shop experience is a plus. 💼 Why Work With We Staff Better? ✅ Benefits start Day 1 💰 Weekly pay every Friday 📅 Full-time, stable employment 🚀 Immediate placements available 👉 Apply now - multiple positions need filled ASAP! 📢 Know someone looking? Tag them or share this post!

At Sabre Industries, we connect and power America's communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time. Our teams live out the organization's core values of integrity, commitment, innovation, and connection. That's how we continuously exceed our high standards of enterprise excellence-by creating a space for our engaged employees to thrive. With consistent hiring opportunities nationwide and countless career levels, chances are the next big step on your career path starts here. We work with our employees to create customized career paths and development in all facets of the organization. People will always be our greatest asset and we place emphasis on enhancing the lives of our employees. Scope of Responsibility: This position performs production within prescribed codes, and according to prescribed procedures, specifications, and drawings. Must complete Welder Training Program. Essential Duties: * Ability to plan, organize, pay attention to details and multi-task in a fast paced work environment * Works Independently with minimal supervision once assignments or responsibilities outlined and delegated. Displays a strong sense of ownership for work. * Flexible and Adaptable: Copes with ambiguity, change, and uncertainty effectively. Not hesitant to resolve lack of clarity, structure, or definition of outcomes then moves ahead. * Actively seeks and supports continuous improvement activities in process efficiencies, costs and effectiveness of work * Knowledge of general safety guidelines and Sabre's quality expectations and application in the work place * Uses the Flux Cored Arc Welding process to tack weld various small components to round or formed shafts to make a pole assembly for the welder to weld. The pole assembly generally consists of a round tube or formed shaft, baseplate, hand hole, arm mounting simplex, tenon top, vangs, step lugs, ladder clips, and/or other small parts. * Works in Large Pole department on individual fitter station to assemble pole assembly. Assist material handler in loading round tube or formed shaft on individual fitter station. * Reads and interprets drawings to determine parts needed to assemble pole assembly. Locate and gather Storeroom Personnel staged parts needed for assembly from parts staging area. Frequently pushes, pulls, and lifts up to 50 pounds. * Reads and interprets drawing to assure proper location of various small part attachments. Layout various locations on round tube or formed shaft based upon interpretation of drawings and specifications. * Uses measuring tape, level, square, and angle finders to measure distances and angles. Adds, subtracts, multiplies, and divides feet, inches, fractions, and decimals. Uses table to convert fractions to decimals and decimals to fractions. * Uses plasma torch and oxy-fuel torch to cut steel. Uses jigs made at Sabre/Texas for laying out vang slots and for cutting holes in shafts for inserting hand hole rims, arm mounting simplex, couplings, and other small parts. Wear protective goggles or welding hood to protect eyes from harmful rays. * Moves around round tube or formed shaft as necessary to get into proper position to accurately measure and assemble components described above including standing on elevated platform when necessitated by the size of the shafts. * Uses motorized grinders, motorized buffers, stone grinders, and drills to help assemble pole assembly according to prescribed specifications, codes and drawing. Wears protective face shield and safety glasses to protect eyes and face. * Adjusts welding machine to achieve desired results within parameters of established welding procedures. Changes tips, ceramic cups, and electrodes in plasma torch as needed to achieve desired cutting results. * Finish weld various products of the unit to keep the product moving through the large pole department in a timely manner. Reads and interprets weld symbols. * Uses oxy-fuel torch to preheat parts prior to welding. Read codes and specifications to determine proper temperature and uses instruments provided to measure temperature. * Uses chipping hammer, wire brush, motorized grinder, and motorized wire brush at various times to clean welded areas. * Uses pneumatic drills and magnetic drills to drill and ream various sizes holes in poles as required by the drawing. * Wears protective equipment, including safety glasses, insulated welding gloves, welding cap, leather sleeves, and/or cape, and welding hood for protection against hot metal, arc rays, grinding debris, and other potentially. * Performs visual inspecting and identifies material discrepancies to assure welds have been completed satisfactorily in compliance with applicable drawings and specifications. Uses a weld gauge to measure weld size. * When called for by the drawings and specifications, must produce full-penetration welds as defined by American Welding Society code. Uses air-arc gouger to remove weld defects, and rewelds to meet specifications. * Uses overhead crane to load finished poles into bolsters for transportation out of the pole assembly area. * Welds other products in other areas, using either Flux-Cored Arc Welding or Gas Metal Arc Welding process. * Assist and instructs other welders and fitters when needed to overcome deficiencies in quality and/or productivity. * Additional duties as assigned Position Requirements: * High School diploma or GED equivalent preferred * Must have knowledge of basic shop mathematics, addition, subtraction, fractions, multiplication and decimals. * Proficiency in reading complex prints and specifications. * Must know how to properly use a weld gauge. * Read and write. Physical Requirement * Must be able to stand 100% of scheduled shift. Lifting, pushing, prying, and dragging heavy materials. * Must be capable of bending, stooping, crawling under or over and occasional climbing of stairs/ladders heights up to 6 or 7 feet. * Abnormal level of noise due to grinding, chipping, hammering requires hearing protection (ear plugs) be worn at all times. * Must possess adequate dexterity and stamina to sustain expected production effectively. * Must be able to work in fast-paced work environment * Must be able to lift up to 50 pounds. * Must be able to perform physical activities that require considerable use of arms and legs and moving entire body, such as climbing, lifting, balancing, walking, stooping, bending, twisting and handling of materials. * Position requires manual dexterity, arm-hand steadiness and a safety-minded individual. * Must be able to work in an open environment exposed to extreme temperatures. At Sabre Industries, we invest in your future with a competitive benefits program. As a full-time employee, you are eligible for: * Medical, Dental & Vision coverage * 401(k) with Company Match * Continuing Education & Tuition Reimbursement * Life and Disability Coverage * Paid Time Off & Paid Holidays * Health and Wellness Resources * Employee Discounts Sabre Industries is an Equal Opportunity Employer: M/F/Vets/Disabled/Sexual Orientation/Gender Identity