Piping designer work from home jobs - 187 jobs

SummaryAs a Lead Engineer in Inspection Engineering will develop and deliver Inspection Tools that are used to perform nondestructive examination (NDE) Inspections of both Boiling Water Reactors (BWR) and Pressurized Water Reactors (PWR) for GE Vernova Hitachi Nuclear Energy (GVH) customers at domestic and international Nuclear Plants. The Lead Engineer will be responsible for the design, development, and testing of new products and technology to meet customer needs and overcome complex technical challenges.Job Description Roles and Responsibilities As a Lead Engineer you will: Execute the design, and development for specialty tooling and equipment using sound engineering principles and adhering to engineering standards, practices, procedures, and product requirements. Develop mechanical robotic inspection tooling of medium to high complexity Proactively communicate and deliver assignments on time. Identify and mitigate technical risk. Communicate technical detail to fabricators and technicians through the generation of fabrication drawings, specifications, and direct communication. Generate operational instructions for newly developed tools and equipment. Contribute to the success of others by providing feedback and technical input during design reviews and verifications. Provide emergent issue response to Field Services teams and Customers as required. Interface with a broad, multi-disciplinary team. Required Qualifications Bachelor's degree in engineering from an accredited university or college At least 4 years of mechanical and/or machine design experience Eligibility Requirements The preferred work location for this role is at the GVH Headquarters Wilmington, NC but highly qualified remote candidates will be considered. Ability to obtain commercial nuclear site entry. Ability and willingness to travel up to 20% (30 % if remote) domestically and internationally to other GE Vernova locations, vendors, and customer sites as necessary. This role is restricted to U.S. persons (i.e., U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to U.S. export-controlled technology. GE will require proof of U.S. person status prior to employment. Desired Characteristics Proficient in 3D CAD design and computer skills. Solid understanding of the principles of Mechanical Design Experience with the selection, use, and design of mechanical components including gears, belts, bolting, pneumatics and hydraulics Experience in the development of equipment within the nuclear services sector, particularly with regards to inspections provided during a maintenance outage at BWR's and PWR's Ability to troubleshoot improperly functioning equipment and implement the proper changes. Ability to assess technical risk and devise suitable means to mitigate. Familiarity with LEAN tools and principles. This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes #LI-Remote - This is a remote position For candidates applying to a U.S. based position, the pay range for this position is between $89,300.00 and $148,700.00. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set.Bonus eligibility: discretionary annual bonus.This posting is expected to remain open for at least seven days after it was posted on January 12, 2026.Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off.GE Vernova Inc. or its affiliates (collectively or individually, “GE Vernova”) sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.

Job Title: Mechanical DrafterJob Description We are seeking a meticulous and technically proficient Mechanical Drafter to join our team. The ideal candidate will be responsible for creating and reviewing mechanical drawings using CAD software, updating job information, and ensuring all work complies with safety standards. Responsibilities + Create and update drawings using CAD software, with a preference for AutoCAD and Inventor. + Review mechanical drawings to ensure accuracy and compliance with standards. + Update job information and maintain organized records. + Exhibit safe work habits and adhere to all PPE and OSHA requirements during time spent in the manufacturing area. Essential Skills + Proficient in CAD software, particularly AutoCAD and Inventor. + Strong organizational skills and technical proficiency. + Ability to read, analyze, and interpret manufacturing drawings, technical manuals, and diagrams. Additional Skills & Qualifications + Associate's Degree with 0-10 years of experience. + Experience with mechanical drawings. + Familiarity with BOM and procurements is preferred. + Experience with heat exchange or similar mechanical plant equipment. Work Environment This position is primarily onsite, requiring attendance 5 days per week. Remote work may be considered on a case-by-case basis. Employees in this role will enjoy optional overtime in an hourly capacity and will receive 3 weeks of PTO once transitioning to direct employment. Job Type & Location This is a Contract to Hire position based out of Duquesne, PA. Pay and Benefits The pay range for this position is $24.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Duquesne,PA. Application Deadline This position is anticipated to close on Jan 26, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Job DescriptionBenefits: 401(k) 401(k) matching Dental insurance Health insurance Paid time off Tuition assistance CAD Detailer Las Vegas, NV Seeking a skilled and experienced Detailer who can interpret design drawings, written instructions, and field sketches to create accurate 3D fabrication drawings. The role requires a minimum of 5 years of experience working with cabinets and exhibits. Key Responsibilities: Create detailed 3D models, cut sheets, CNC layouts, floor plans, material/hardware schedules, electrical plans, and fabrication drawings. Draft and interpret both 2D and 3D drawings using AutoCAD (5+ years of experience required). Collaborate closely with carpenters and fabricators to ensure items are built according to specifications. Manage multiple projects simultaneously while meeting tight deadlines. Communicate effectively with project managers and team members, follow direction, and provide feedback. Utilize Microsoft Office programs for project coordination and documentation. Requirements: Minimum 5 years of experience detailing for trade shows, cabinetry, or related fabrication fields. Strong proficiency in AutoCAD (2D and 3D). Solid understanding of material properties and fabrication methods including aluminum, steel, plywood, and acrylic. Excellent communication, organization, and time management skills. Ability to work independently and within a fast-paced team environment. Compensation & Benefits: Full-time position. Paid holidays, vacation, and health insurance available after a standard waiting period. This is a remote position.

The Company SYSTRA delivers architecture, engineering and construction and program management services to our clients that offer public transportation, public education and public housing to our communities. We partner with public transportation owners and operators of bridges, buses, commuter and intercity, high-speed and light rail, mass rapid transit and tunnels, helping them provide safe, efficient and reliable public transportation. SYSTRA also serves public facility authorities that provide safe, attractive, and environmentally sound public schools and offer affordable housing to communities. Ranked 18th in US mass transit and rail design by Engineering News-Record (ENR), SYSTRA has been a trusted partner to public agencies and operators throughout the US since 1985 and employs nearly 200 personnel nationwide. Part of SYSTRA Group, a world-leading engineering and consulting firm, SYSTRA is supported by the over 10,500 employees worldwide. Using a collaborative approach built on the firm's value of Connected Teams, we provide our clients and partners access to the best skills worldwide via sharing information, tools, best practices, and processes. Context We're looking for a new CAD Designer in our Power and Systems Group to help drive the objectives and challenges our valued clients have trusted us to solve for them. You will work fully remote with ocassional travel as needed. Missions/Main Duties As a SYSTRA US CAD Designer you will join a world-class team of high-performing engineers, designers, drafters and others who work collectively to ensure client projects continue to thrive while remaining on track and budget. Duties and Responsibilities: Partner with senior engineers/designers to prepare design drawings Assist with the design of transportation systems and structures, following construction, client and government standards, using design software and drawing tools Utilize your expertise in Bentley MicroStation Open Buildings for preparing design drawings Manage drawing files Archive drawing prints and files, assemble drawing submission packages, assist with site investigations and walkdowns and analyzing and reviewing the design requirements to ensure match with customers' specifications Profile/Skills Does this seem like an opportunity that you can be all aboard with in your career? Well, here's a little more on the required experience we're looking for in this new teammate. Required Qualifications: Bachelor's degree in engineering or architecture, or equivalent work experience Minimum 5 years of experience as a modelling practitioner working with project engineers or managers on electrical, transit and rail based projects Self-starter with strong analytical and problem-solving skills to understand what tasks are required to deliver projects and assignments successfully, as well as solving technical challenges while developing new workflows Background in tools and systems such as AutoCAD, MicroStation and Revit Knowledge and appreciation for best performance in model-based design (BIM) protocols, standards and software Excellent written and oral communication skills giving you the ability to work closely with all involved teams/team members Preferred Qualifications: Experience on US based transit and rail projects SYSTRA USA provides a benefits package including medical, dental, 401k and other offerings that focus on providing health and financial stability throughout the employee's career. SYSTRA USA is an equal opportunity employer committed to a diverse workforce. Employment decisions regarding recruitment and selection will be made without discrimination based on race, color, religion, national origin, gender, age, sexual orientation, physical or mental disability, genetic information or characteristic, gender identity and expression, veteran status, or any other consideration made unlawful by federal, state, or local law. Relocation assistance is not available for this position. Sponsorship assistance is not available for this position. Salary Range: $86,000-120,000, SYSTRA USA is providing the compensation range that the company believes it might pay and/or offer for this position, based on the successful applicant's education, experience, knowledge, skills and abilities in addition to internal equity and specific geographic location.

The Technology Designer will play a critical role in producing coordinated, buildable technology designs. The scope includes everything from low-voltage systems and structured cabling to device layouts and equipment riser diagrams, with a strong emphasis on REVIT modelling. This is a remote position, though occasional travel to project sites may be required for coordination or field verification. Key Responsibilities Develop and document Division 27 & 28 system designs in REVIT, including device layouts, rack elevations, risers, and schedules Collaborate with architects, engineers, and stakeholders during all phases of design Create detailed narratives, plans, and construction documents aligned with client needs Participate in coordination meetings and design reviews Review and respond to contractor submittals, RFIs, and field issues during construction Ensure all documentation meets project standards, codes, and best practices Required Qualifications RCDD preferred but not essential 5+ years of experience designing technology systems in an A/E environment Proficient in REVIT for low-voltage/technology design workflows Project experience in Data Centers, Healthcare and/or Commercial Buildings Familiarity with structured cabling, AV, security, Wi-Fi, and other low-voltage systems Ability to work independently and collaborate in a remote team setting Strong communication and documentation skills Preferred Qualifications Working knowledge of applicable codes (TIA, NEC, NFPA, etc.) Experience with design-build and/or fast-track commercial projects Background in coordinating across multiple disciplines (MEP, architecture, etc.) Comprehensive Benefits: Medical, dental, vision, flexible spending accounts (FSA), company paid short-term disability (STD), long-term disability (LTD), and life insurance. Participation in our company-funded Employee Stock Ownership Plan (ESOP). Performance based bonuses. 401(k) with employer matching.

Benefits Flexible hours Competitive Compensation Year-Round Work The Designer analyzes blueprints, specifications, proposals, and other documentation to prepare ACCA-based heat load calculations and designs for new residential construction homes. Representative duties include: Reviewing data to determine material and labor requirements, and preparing itemized lists. Computing cost factors and preparing estimates used for management purposes such as planning, organizing, and scheduling work, preparing bids, selecting vendors or subcontractors, and determining cost effectiveness. Conducting special studies to increase cost-effectiveness of projects. Consulting with clients, vendors, and Department Managers to discuss and formulate estimates and resolve issues. Cooperating with the Service and IAQ Departments on projects as assigned by the Installation Manager. Job Qualifications: B.S. in Engineering preferred but not mandatory. Minimum of two years' experience as an HVAC designer. Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, and governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Excellent written communication skills and the ability to effectively present information and respond to questions from managers.. Knowledge and experience with geometry and trigonometry, and the ability to apply mathematical concepts such as fractions, percentage ratios, and proportions to practical situations. Demonstrated ability to quickly learn new software and technology, with proficiency in Microsoft Office, Wrightsoft, & AutoCA used in the design process. This is a remote position. Compensation: $100.00 - $2,000.00 per week There are many exciting options for a career in HVACR waiting to be explored. If you're looking for a career that offers flexibility, job stability, strong pay, benefits and more, then you've come to the right place!

ITAC serves Process & Industrial clients with integrated engineering and construction services for complex capital projects. We also offer specialty services including power systems services and products, custom machine fabrication, and fall protection services and equipment. Founded in 1988 on a dream and a $5K loan, ITAC is a true success story. From humble beginnings to an ENR-Ranked Top Design Firm with a nationwide footprint and over 450 employees operating from 6 offices in Virginia, North Carolina and South Carolina, we provide Fortune 500 companies with innovative design-build solutions. We specialize in power generation & utilities, chemicals, food & beverage, forest products, advanced manufacturing, and minerals & metals. ITAC's purpose is to make life better. For our employees, this means providing them with the resources and flexibility they need to have both a rewarding career and a fulfilling family life. ITAC is 100% employee-owned. Through our Employee Stock Ownership Plan (ESOP) and Direct Stock Ownership, every team member has the unique opportunity to be an owner who shares in the company's growth and earnings. We offer our team a comprehensive benefits package and numerous employee incentives. Rooted in love, we serve and care for our employees like family. We hire passionate and motivated people with an innovative mindset and the desire to grow. If the thought of challenging, fast-paced projects excites you, then you've come to the right place. At ITAC, you'll be part of a collaborative team that works hard to make life better. For more information, visit itac.us.com. The Machine & Sheet Metal Designer is responsible for creating detailed mechanical designs, 3D models, and engineering drawings for machinery, sheet metal components, and fabricated assemblies. This role supports engineering, production, and manufacturing teams by ensuring designs meet functional requirements, cost objectives, safety standards, and manufacturability guidelines. The Designer will work primarily in an office/shop environment producing designs and specifications under the direction of the director. The position will interface with clients as needed and travel to client facilities to measure physical dimensions for machinery and observe production lines. The position will provide assistance in the shop when required. Key responsibilities: Design & Drafting Develop 3D models, assemblies, and engineering drawings for machines, equipment, tooling, and sheet metal components. Create fabrication drawings, weldments, flat patterns, and detailed sheet metal layouts. Design custom machine components, frames, guards, brackets, and other mechanical parts. Produce accurate BOMs (Bills of Material), tolerances, dimensions, and GD&T. Engineering Support Collaborate with engineers, machinists, fabricators, and project managers to refine design requirements. Modify designs based on testing, prototyping, and customer feedback. Ensure designs comply with industry standards, safety requirements, and internal engineering practices. Participate in design reviews and support continuous improvement efforts. Manufacturing Integration Work closely with manufacturing to ensure designs are practical, cost-effective, and easy to fabricate. Provide guidance on material selection, sheet metal thickness, bends, tolerances, and fastening methods. Support CNC programming, laser cutting, waterjet, press brake, machining, and welding processes. Project Coordination Manage multiple design tasks and assist with project schedules. Communicate design status, risks, and required information to project leads. Maintain document control and revision history for all design files Requirements Associate or Bachelor of Science in Mechanical Design, Drafting Technology, Mechanical Engineering or related field preferred. PE License Preferred. 3-5 years of experience in mechanical design, machine design, or sheet metal design. AutoCad in both 2D or 3D (or equivalent combination of education and experience). Strong problem-solving and analytical abilities. Effective communcation and teamwork skills. Ability to manager multiple projects and meet deadlines. Attention to detail and commitment to quality. Ability to travel regularly to project sites. Benefits From internships to seasoned professionals, our growing company provides career opportunities for all levels of experience. We offer our team a comprehensive benefits package and numerous employee incentives. For life's challenges, we also provide our employees and their immediate families with certified chaplains for around-the-clock encouragement and support. Rooted in love, we serve and care for our employees like family. ITAC provides benefits such as Health, Vision, and Dental Insurance 401k & ESOP Life Insurance Short & Long-Term Disability Sick Time Off Paid Time Off Paid Holidays Employee Assistance Program Tuition Reimbursement Professional Development Wellness Program Mentorship Program Safety Incentive Program 24/7 Chaplain Care Flexible Schedule & Remote Working

Description Concordia Wireless, is a privately held full-service engineering and telecom infrastructure construction firm experiencing rapid growth across the country. Clients consider us the ‘best choice' for their design and installation services needs. We are one of the few Engineering Firms in the Country that designs and builds its own creations in the wireless sector. We support Fortune 500 clients such as T-Mobile, Verizon, and AT&T. We are seeking an AutoCAD Designer/Drafter to assist our team in supporting growing business. In this role, you will create architectural designs for wireless telecommunications sites including raw land cell towers, rooftops, tanks and more. This role requires strong experience utilizing the AutoCAD software tool. This is a fully remote role. Candidates will be required to complete an AutoCAD assessment prior to interview. Unfortunately, we are not able to sponsor candidates at this time including those on OPT. Pay Range: $50,000 - $60,000 plus bonus Factors, such as but not limited to, geographical location, relevant experience, education, and skill level may impact the pay for this position. Benefits: 401K - with company match up to 6% Healthcare: Medical, Dental, Vision with BCBS as the carrier Company paid life insurance Short- and long-term disability benefits Vacation pay and sick pay Minimum of 10 paid holidays Endless opportunities for growth! Responsibilities: Complete civil and architectural designs for wireless telecommunication sites Analyze and understand the specific project scope of work including existing electrical power and proposed power requirements Perform structural mappings on rooftops and take measurements on sites and collect data from the field sufficient to perform the designs in the office side Identify any potential space constraints/challenges and develop a solution for the site layout Perform site walks with the project manager and the customer whenever needed Requirements: Bachelor's Degree in any Engineering field or Architecture; will consider candidates who have an AutoCAD certificate but lack an engineering degree Proficiency in AutoCAD is a must! Must be using AutoCAD daily to be considered proficient Designing commercial or telecom structures is preferred over residential Proficient in Microsoft Office (Outlook, Word, Excel, ETC.) Strong attention to detail Strong sense of urgency; we are a fast-paced environment Role is not best suited for Interior or Graphic Designers Concordia Wireless is a division of Concordia Group. Concordia Wireless. is a drug and alcohol free workplace including marijuana. Concordia Wireless is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

**Note: Required PPE: Hard Hat Work Boots Safety Glasses.** **Must live within 1 hour of client. Two weeks working at The client in the beginning to have computer assigned, set-up and learn the job requirements. Once comfortable with work and team members the individual can work remotely.** **Job Description:** + The Structural Designer 1 position requires 0-5 years heavy industrial/power plant experience. **Job Responsibilities:** + Job responsibilities include producing design/fabrication drawings for structural steel, reinforced concrete, and conceptual designs, reviewing vendor shop fabrication drawings, and preparing material takeoffs. + Skillsets and expertise required for this position include proficient using AutoCAD, steel/concrete detailing background is a plus, and the ability to build effective relationships with customers, design engineering staff and/or vendors. **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit ************************ US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

This position is posted by Jobgether on behalf of a partner company. We are currently looking for a Structural Designer 2. This role offers you the opportunity to work with multi-disciplined engineering and design project teams, developing structural physical layout drawings in a 3-D model. You will tackle challenging assignments, from designing structural supports and foundations to investigating and solving a variety of design issues. Your contributions will help ensure timely and complete design deliverables while mentoring less experienced team members.Accountabilities Collaborate with engineering and design project teams to create structural layout drawings in 3-D model. Design structural supports and foundations, addressing and troubleshooting various design issues. Utilize 3D modeling software tools to generate structural design schematics. Lead the structural design team in coordinating detailed design phases. Provide guidance to other designers and project team members for timely design completion. Plan and execute structural design deliverables independently and as part of a team. Assist senior designers and engineers during field walkdowns and data gathering. Requirements Foundation in a technical area including drafting or equivalent technical experience. Ten (10) or more years of detailed design experience in structural steel and reinforced concrete. Proficient with design software tools for executing 3D plant layout models. Experience reviewing structural layout drawings involving steel frames, connections, and supports. Ability to interface effectively with multi-disciplinary engineering and design teams. Benefits Comprehensive healthcare plans including Medical, Dental, Vision. 401(k) with company match and other financial benefits. Generous paid time off and flexible work arrangements. Employee Assistance Program (EAP) and life insurance. Competitive salaries with eligibility for yearly discretionary bonuses. Why Apply Through Jobgether? We use an AI-powered matching process to ensure your application is reviewed quickly, objectively, and fairly against the role's core requirements. Our system identifies the top-fitting candidates, and this shortlist is then shared directly with the hiring company. The final decision and next steps (interviews, assessments) are managed by their internal team. We appreciate your interest and wish you the best!Data Privacy Notice: By submitting your application, you acknowledge that Jobgether will process your personal data to evaluate your candidacy and share relevant information with the hiring employer. This processing is based on legitimate interest and pre-contractual measures under applicable data protection laws (including GDPR). You may exercise your rights (access, rectification, erasure, objection) at any time.

Why Willdan At Willdan, we seek action-oriented thought leaders, who are driven to solve some of tomorrow's biggest challenges - especially those in energy and infrastructure. Our employees want to make a difference, and we have the ambition, resources, and technical know-how to do it. Our rapid growth and successes over the past five decades stem from our ability to think big while also paying special attention to project quality and customer service. Willdan Performance Engineering, a division of Willdan Group Inc., inspires and empowers communities by creating transformational environments. Our clients include school districts; universities; city, county, and state governments; private enterprises; and healthcare facilities. Our guiding principles are as follows: We drive change We think long-term We are courageous experts delivering ambitious solutions Personal growth drives organizational growth; Organizational growth drives personal growth We succeed when we are accountable as a team We cultivate diverse, equitable, and inclusive teams committed to serving our communities We are currently looking for a senior-level mechanical engineer to join our Design Engineering team. The selected candidate will become a part of a growing organization with year-over-year revenue growth, competitive benefits, and a diverse project workload. The job responsibilities and required skills are described below. Essential Duties & Responsibilities The Senior Mechanical Engineer is responsible for the mechanical design of building infrastructure and energy conservation projects with a focus on hydronic systems, cooling towers, steam boilers, built-up AHUs, building automation control systems, and plumbing systems. The candidate will have a bachelor's degree in mechanical engineering, be a licensed mechanical professional engineer, and have a minimum of eight to ten years of experience. Some travel is required. The ideal candidate will demonstrate success in the following skills and abilities: Design mechanical and plumbing building systems with emphasis on complex systems. Create clear accurate construction documents and engineering building specifications. Review equipment submittals, respond to RFIs and AHJs, perform construction site inspections, and create reports. Be accountable for project design compliance with engineering principles, company standards, and customer contract requirements. Design diverse, simultaneous projects of varying complexities. Interact with sales, project management, construction, and commissioning to deliver a high-quality outcome. Have advanced knowledge of national codes and design practices. Improve productivity, quality, and efficiency by developing new tools, processes, and procedures for design engineering tasks. Provide professional guidance and training for junior level design engineers. Identify, recommend, and implement new technologies and systems to improve organizational processes and decision-making. Communicate with customers to determine needs and applications relative to special installations and adaptations. Ensure that assigned projects meet all internal and external expectations including, but not limited to, client satisfaction, budget, timing, quality, and safety. Be proficient in Microsoft Office and heating and cooling load calculation software (Trane Trace 3D).Ability to lead project in design. Experience designing in Revit and Bluebeam. Experience in mechanical design for VRF and heat pump systems. Job Requirements / Qualifications Bachelor's degree in Mechanical Engineering. Mechanical professional engineering license is required. NCEES record a plus. Experience in design of central plants with complex hydronic systems. Experience in HVAC system electrification. Minimum 8-10 years of experience. Be fully capable of working in design teams to assist in meeting the project goals in a team-focused environment. Possess excellent verbal and written communication skills as well as interpersonal skills. Demonstrates the ability to communicate ideas and concepts in both written and oral form. Exposure to high-performance buildings and energy conservation is preferred. EEO Non-Discrimination and ADA Reasonable Accommodation Statement Willdan is an equal opportunity employer. Applicants are considered for all positions without regard to race, religious creed, color, age marital status, sex, sexual orientation, gender identity, gender expression, citizenship status, national origin, ancestry, religion, military service or veteran status, disability, medical condition, childbirth and related medical conditions, genetic testing, reproductive status or any other classification protected by federal, state or local laws and ordinances. Willdan does not discriminate on the basis of physical or mental disability where the essential functions of the job can be reasonably accommodated. Determinations on requests for reasonable accommodation will be made on a case-by-case basis. If you need reasonable accommodation for any part of the application and hiring process, please notify us. Willdan Energy Solutions participates in E-Verify.

Working with our business partners to create, improve and sustain industry and infrastructure. Orbital Engineering has been driven by this core purpose for more than 50 years - energizing Orbital team members and helping our clients solve challenging and complex problems with innovative engineering, inspection, and construction solutions. Orbital team members are guided by the fundamental beliefs of building trusted relationships, personal accountability, innovation, and excellence in everything we do. Orbital is looking for others to join our team to continue activating our purpose and embrace our values. Orbital Engineering, Inc. is currently seeking a Substation Civil / Structural Designer for a REMOTE WORK position. This position will directly support the substation department's design projects. Responsibilities include but are not limited to: * Prepares detailed drawings/models and bills of material for all phases of civil and structural steel designs for substation engineering projects, requiring the application of theoretical and practical design knowledge. * Research information in catalogs, specifications, corporate standards, or other reference material. * Calculate structure heights and weights, concrete volumes, equipment fit up, or other basic tasks. * Ensures project deliverables for technical quality, accuracy and compliance with Company and Client standards. * Reviews and resolves design interferences or issues. * Review and approve vendor drawings and designs. * Conduct site visits to assess project needs and verify design feasibility. * Provide technical support during construction phases. Skills: * Technical Skills: Strong understanding of electrical engineering principles, foundation design, steel design, oil containment, and transmission line design, and relevant industry standards. * Data Skills: Ability to analyze field collected data (including imagery and LiDAR) and accurately update applicable software packages for successful design implementation * Software Proficiency: Proficiency in CAD software and other relevant software used in the industry. * Analytical Skills: Ability to analyze data, identify problems, and develop solutions. * Communication Skills: Ability to communicate technical information clearly and effectively. * Problem-Solving Skills: Ability to identify and resolve technical problems. * Project Management Skills: Ability to assist in managing projects effectively. * Detail-Oriented: Ability to pay attention to detail and ensure accuracy in designs and calculations. * May occasionally enter energized extra-high voltage substations up to 765kV and will need to coordinate with appropriate utility personnel throughout fielding activities within this location Minimum Requirements * Associate's degree in drafting and design is required. * Proficiency in utilizing AutoCAD. * Strong understanding of mathematics, including algebra and basic trigonometry. * Basic knowledge of the major components of a substation. * Basic knowledge of the types of drawings required to construct an electrical substation. * Must be an organized person who can keep data organized from start to finish on a project. * Ability to prioritize work on multiple projects and effectively communicate project statuses. * Computer proficiency including general Microsoft Office products, design, and business enterprise software. * Effective written and oral communication at all levels within an organizational structure. * Must have dependable transportation and a valid driver's license with insurance. * Must be able to pass a fit for duty test. * Ability to work from home and an office setting, as required. * This position requires the ability to pass a post-offer drug (including marijuana) and alcohol test in compliance with Federal regulations and is also subject to random testing as a condition of continued employment.. Preferred Qualifications * Extensive experience in drafting disciplines with a background in utility civil / structural or transmission design. * Physical substation design experience. * Experience with Microstation and PLS-CADD. Orbital Engineering, Inc. has provided worldwide professional engineering and consulting services since 1969. Our commitment to quality, responsiveness, and attention to detail has earned us the reputation as a leading provider of engineering and design services. A commitment to excellence and hard work will be rewarded with a competitive salary, career advancement opportunities, and an excellent benefits package including medical, dental, vision, prescription drug, 401(k), and supplemental insurance. Orbital Engineering, Inc. is an Equal Opportunity Employer, EEO/AA/M-F-V-D. Orbital Engineering, Inc. seeks diversity among its employees. Reasonable accommodations may be made to enable individuals to perform the essential job functions. SUB00002156 #LI-CV1

Civil Science is seeking a qualified CAD Designer to join our Dickinson, Williston, or Fargo, North Dakota team. In this exciting role you will work closely with Project Managers, Project Engineers, and other project team members to design a variety of civil engineering projects. Project types include large-scale land development, infrastructure, transportation, and municipal utilities. The ideal candidate for this position is someone that excels in a fast-paced, self-directed environment. We are eager to help the selected candidate grow his or her career and foresee this position growing into a larger role within our firm. Responsibilities Create and modify detailed 2D and 3D CAD drawings based on project specifications. Collaborate with engineers and other team members to ensure designs meet project requirements. Prepare and review design plans, including layouts, drawings, and blueprints. Update and maintain design documentation and records. Ensure all designs comply with relevant industry standards and regulations. Participate in project meetings and provide input on design-related matters. Assist in troubleshooting design issues and suggest improvements. Minimum Requirements Experience with AutoCAD Civil 3D; Proficiency in CAD software such as AutoCAD, SolidWorks, Revit, or similar. 4+ years of CADD experience in civil engineering profession or equivalent experience in educational setting. Strong understanding of design principles and engineering Excellent attention to detail and problem-solving skills. Ability to multi-task and effectively manage multiple initiatives simultaneously Eagerness to learn and evolve within a fast-paced environment Physical Requirements Prolonged periods sitting at a desk and working on a computer. Must be able to lift up to 20 pounds at times. Ability to set up and participate in activities, which may include squatting, bending, and lifting. Why Join Civil Science? Ownership in Your Future: At Civil Science, we're proud to be a 100% employee-owned firm. Through our Employee Stock Ownership Plan (ESOP), you'll have the chance to grow your career and save for retirement. Room to Grow: Say goodbye to corporate red tape. Our agile structure empowers you to take ownership of projects, explore new roles, and accelerate your career. Work-Life Harmony: Your time outside of work matters. We offer flexibility to ensure your career complements your personal life. Comprehensive Benefits: Enjoy three weeks of PTO, eight holidays, medical, dental, vision, life insurance, short/long-term disability, tuition reimbursement, and a 401K plan. About Civil Science Civil Science isn't just another engineering firm-we're a 100% employee-owned company with over 40 years of expertise and a bold vision for the future. Our team of talented engineers, surveyors, planners, and technicians partners with clients across the public and private sectors to deliver innovative and impactful solutions. At Civil Science, we believe in investing in our people. As an employee-owner, you'll enjoy unmatched opportunities for leadership, mentorship, and career growth, all within a culture that values collaboration, excellence, and entrepreneurial spirit. If you're ready to join a firm that's shaping the future of civil engineering, we'd love to have you on our team! Candidates must have a valid driver's license and be able to pass both a criminal background check and driving record review. Civil Science evaluates and determines on a case-by-case basis whether it is willing to sponsor an individual to receive a temporary or permanent work visa (e.g., E-3, H-1B, H-1B1, or TN visa status). Civil Science provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Privacy Notice for California Applicants and Employees Applicants must be currently authorized to work in the United States on a full-time basis. We are unable to sponsor or take over sponsorship of an employment Visa at this time. Meow Wolf opens portals of possibility. Come as you are! We are individuals who inspire creativity in people's lives through art and exploration, so that our combined imaginations can transform the world we live in. We create immersive and interactive experiences that transport audiences into fantastic realms of story and exploration. Our Vision is to be the world's leading creative company, reimagining the paradigm of art and storytelling, to make a positive difference in the world. We share a strong commitment to Belonging through our values of: Collaborative Creativity: We believe the act of creating together amplifies possibilities. Provocative Playfulness: We celebrate the unexpected because it is the doorway to discovery. Outsiders Welcome: We are all outsiders at heart, and we create space for everyone to feel like they belong. Authentic Compassion: We are “kind punks” - supportive to each other and standing up for what we believe in. Audacious Courage: We have the courage to radically reinvent ourselves to push the boundaries of art. If this all sounds like YOU, read on…. : Job Disclosures: Project based position: This is a project-based role, with an anticipated duration of 2+ years. Location: New York, NY Compensation: The salary range for this position is $121,391 to $167,520. Compensation is based on location and experience. Purpose: The Facility Design Manager oversees and manages the Architectural and Engineering design and construction administration effort. Also manages the resources, finances, and schedule of that project to ensure the project schedule and budget are met. Job Summary Are you a dynamic and roll-up-the-sleeves project management professional with seasoned experience in the themed entertainment, immersive arts or hospitality industries? Join Meow Wolf's project management team as a Facility Design Manager, where you'll be responsible for the on-budget and on-time direction and implementation of facility design and construction for new exhibitions, as well as Sustainment and Expansion projects. Specific components include all planning, budgeting, scheduling, estimating, design, construction, fabrication, delivery, and commissioning required to open the project within the assigned budget, quality, schedule, and creative and guest experience targets. The Facility Design Manager acts as point of contact with customers and stakeholders for all project related issues. Essential to the role is possessing strong interpersonal skills and bringing a partnership approach to project delivery with both internal and external stakeholders who range from Creative Directors to vendor partners. Job Responsibilities Responsible for the coordination between the Architecture of Record including their engineering consultants, and all Meow Wolf scenic show, show tech, creative and art exhibit vendors. Cultivate collaboration across Meow Wolf's internal creative, show tech, and scenic teams. Understanding and including the development of all preliminary and final facility impacts. Responsible for the development of the Architecture and Engineering scope of work / request for proposal documents, the selection and pre-qualification of potential Architecture and Engineering vendors, the response to questions / clarification during the proposal process, the analysis of the proposals and the development of the recommendation for the vendors. Oversees the Architecture/Engineering schedule for facility design. Responsible for ensuring that the Architecture and Engineering vendors maintain the required schedule and meet their milestone delivery dates in a timely manner. Responsible for managing the Architecture and Engineering vendors contractual obligations including the evaluation of any requests for additional services, the preparation of any directives, the negotiation of all changes and the incorporation of any agreed upon changes into the vendors agreement. Manages the Architecture and Engineering vendors throughout the design and construction phases of the project. Ensures that the creative design intent is maintained during the preparation of design documents by the Architecture and Engineering vendors and other outside parties. Responsible for the development of a complete cost effective and constructible set of drawings specifically for the facility Architecture/ Engineering of the project. Responsible for reviewing the drawings and specifications to ensure that they meet the design intent, the creative appearance and are complete and accurate for construction. Monitors construction in the field including identifying and resolving discrepancies between the construction and drawings and/or design intent. Participates in the management and response to the various requests for information. Evaluates the Architecture and Engineering vendor's responses to requests for information and the preparation of modification documents. Understand and actively participate in Environmental, Health & Safety responsibilities by following established Meow Wolf policy, procedures, training and team member involvement activities. Assist in the development of Meow Wolf BIM standards and Guidelines as well ensuring the Architect and their subconsultants are following them throughout project phases. 3D Model management, exporting files as needed to share and collaborate with all vendors. Performs other duties as assigned. Job Requirements Licensed Architect or in process of taking exams required Bachelor's degree in Architecture, or Engineering from an accredited university or college is required. 7-10 years of turn-key project experience, preferably within the entertainment industry, is required. Supervisory and contract/vendor management experience. Hand and Computer drawing/drafting skills required. Experience with AutoCAD Revit, Navisworks Manage, Sketch Up, Autodesk Construction Cloud Design Collaboration, Model Coordination and Build modules required. Familiarity with BIM technology and best practices. Knowledge of forecasting and budget allocation techniques. Works well in a multi-faceted team environment. Familiarity with general building codes and life safety requirements. High degree of tact & diplomacy to obtain favorable decisions or maintain good will. You are able to cultivate and maintain strong relationships with internal and external stakeholders. You bring strong experience creating, understanding, managing and adhering to project budgets, schedules and milestones. You are skilled in problem solving as well as anticipating changes within the project scope. You hold excellent interpersonal skills, written and oral communication skills, organizational as well as creative thinking essential tools to set you up for success. Excellent analytical and organizational skills. Proficiency with Google Suite, Autodesk Products and Bluebeam Revu Work Environment and Physical Demands To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed must be representative of the knowledge, skills, minimum education, training, licensure, experience, and/or ability required. Work Environment: This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and scanners. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Physical ability to walk, stand, take stairs/slides/elevators, and navigate the elements during the day and night. Employee may be required to remain in a sitting or standing position for prolonged periods, and repeat motions that may include the wrists, hands, and/or fingers. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to lift up to 10 pounds at times. The employee will comply with company and OSHA standard workplace safety protocols. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Schedule: This is a full-time position, and hours of work and days are Monday through Friday, 9a.m. to 5 p.m. or 10 a.m. to 6 p.m. Occasional evening and weekend work may be required as job duties demand. Supervisor Responsibilities: This position does not require supervisory responsibility. Travel This position will require some travel (up to 25%) Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. IMPACT: Meow Wolf is committed to our DIY roots and grassroots community support principles. To document that commitment, we converted our legal designation into a Delaware Public Benefit Corporation and have certified as a B Corporation. As a B Corp, we have a triple bottom line of supporting financial, social and environmental wellbeing in our community. INCLUSION: Meow Wolf is an equal opportunity employer and prohibits discrimination and harassment of any kind. We are committed to ensuring all employees enjoy and thrive in a work environment where differences make us the vibrant, wonderful community we are! All employment decisions at Meow Wolf are based on business need, job requirements, and individual qualifications, without regard to race, color, ancestry, national origin, gender, pregnancy, sexual orientation, marital status, religion, age, disability, gender identity, results of genetic testing, veteran status, service in the military or any other characteristic protected by federal, state or local law. BENEFITS: The choices we make concerning our benefits during enrollment periods are among the most important we select for ourselves and our families. As part of the total compensation package for full-time employees, Meow Wolf offers a comprehensive benefits package that includes various options to meet individual healthcare and financial needs along with many perks. Medical Insurance options: PPO & HDHP* Dental and Vision Insurance* HSA, HRA, and FSA options* 401k Retirement Plan Company paid Life Insurance Policy and Disability Coverage(s)* Voluntary Critical Illness and Life Insurance Policies* Company Paid Employee Assistance Program Paid Parental Leave for 12 weeks Discount off Meow Wolf Gift Shop Merch and Cafes Admission to Meow Wolf attractions for employees and guests *Regular or Project Based Full-time positions Please visit ************************ for more information.

CAD Designer (Remote Possible) Pharmaceutical Manufacturing Industry: Pharmaceutical Manufacturing Employment Type: Contract About the Role We are seeking a skilled CAD Designer. This is an exciting opportunity to work with a fast-paced, innovative group supporting critical facility and process upgrades. Our ideal candidate will have experience in architectural, electrical, and P&ID (Piping & Instrumentation Diagram) CAD work, and will collaborate closely with multi-disciplinary teams. Remote work is available and encouraged for the right candidate. Key Responsibilities Create, revise, and maintain CAD drawings to support architectural layouts, electrical schematics, and P&IDs for a pharmaceutical manufacturing site Collaborate remotely and onsite with process engineers, architects, and electrical engineering teams to gather requirements and execute drawing updates Develop and manage drawing packages for project submittals, permitting, and construction Incorporate project specifications, site sketches, and markups into detailed CAD designs Coordinate with QA/QC, project managers, and other stakeholders to ensure compliance with industry standards and company practices Assist in document control and version management for all CAD deliverables Participate in remote design reviews and provide recommendations for drawing improvements Ensure that CAD layouts comply with relevant codes and cGMP/regulatory requirements for pharmaceutical facilities Requirements Proven proficiency in AutoCAD (or equivalent CAD platforms) with a portfolio supporting architectural, electrical, and/or process (P&ID) design Minimum 2 years CAD experience (pharmaceutical, biotech, or related FDA/regulated industry highly preferred) Ability to work efficiently in a remote environment while staying communicative and responsive to project updates Familiarity with typical pharmaceutical facility layouts, clean room design, and electrical system integration is a plus Experience with P&ID standards and coordination between disciplines (process, architecture, MEP) Strong teamwork, organizational, and communication skills Self-motivated, detail-oriented, and capable of managing multiple design packages Please note: This position does not offer visa sponsorship. Applicants must have the legal right to work in USA without sponsorship. Additionally, we do not accept third-party contractors. This is a great opportunity for AutoCAD professionals looking to apply their skills in the pharmaceutical sector with a flexible work arrangement. We look forward to your application!

ABOUT US Matrix Technologies, Inc. has been a leading provider of engineering, automation, and systems integration services since 1980. Guided by 'The Matrix Way,' we value teamwork, collaboration, and fun. Recognized as a Top Workplace, we offer flexible schedules, professional growth opportunities, and market-leading compensation. Our expertise spans multiple industries, and 87% of our projects are from repeat clients, showcasing our commitment to quality and customer satisfaction. Come experience “A Better Process for Success” with us. Culture matters! At Matrix, our core purpose is Enhancing People's Lives…Every Day . Our fundamentals guide our culture, and you can learn more about our unique environment here: ************************* OVERVIEW Join our team as a Process Mechanical Drafter! This is a role based out of our Denver office, in Westminster, CO. The position is a salaried role and includes eligibility for overtime pay. Matrix is seeking entry-level drafting professionals to join our team in Westminster, CO. Ideal candidates for this position will have a solid foundation of experience with CAD-based software and a strong aptitude for learning. Good written and oral communication skills, desire to grow and expand in experience, and willingness to learn cross discipline design are required for this position. KEY RESPONSIBILITIES Works in a safe manner at all times. Adheres to both Matrix and client-established safety standards when appropriate. Perform design and engineering functions in accordance with accepted practices and company standards. On small projects, interface with the client as necessary to obtain and communicate project information related to project design parameters, schedules, and budgets. Prepare and maintain project documentation to include proposal, project log record, Work Breakdown Structures Report (WBS), memos, letters, meeting minutes, scope changes, and associated documents. Gather field data and prepare project specifications. Coordinate design activities of other team members in preparation of the construction documents. Prepare construction scopes of work, bills of material, specifications, cost estimates, and other necessary construction documents for projects. Maintain and/or develop positive client relationships on projects assigned. QUALIFICATIONS Associates degree (AAS) or Certificate in CADD software, or related field required. Entry-level to two (2) years of experience in the industrial design arena. Proficient with AutoCAD - preferred. Proficient in Revit. Must be legally authorized to work in the United States now or in the future without employer sponsorship. PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is occasionally required to stand; walk; sit; stoop, kneel, crouch; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; talk, and hear. The employee must frequently lift and/or move objects up to 10 pounds and occasionally lift and/or move objects up to 25 pounds. Specific vision abilities required by the job include close vision, distance vision, color, vision, peripheral vision, depth perception, and the ability to adjust focus. This employee may perform industrial field work which could include exposure to hazardous locations, inclement weather, moving mechanical parts, noise, ladders, uneven ground, and stairs. This employee may perform industrial field work which could include exposure to a wide range of known food allergens. WHY MATRIX? Physical and Mental Wellness and Work/Life Balance: Health Insurance with Prescription Drug Coverage, Dental and Vision Insurance Generous Paid Time Off (Extra Days for Purchase) and Nine Paid Holidays Paid Parental Leave, Bereavement Leave Flexible Work Schedules, Work at Home Options Wellness Program with Incentive Dollars, Preventive Health Screenings Employee Assistance Program (EAP), Critical Illness and Accident Insurance Financial Wellness: Employee Stock Ownership Plan (ESOP) 401(k) and Roth Plans with 5% Match and immediate vesting upon enrollment Market-based competitive Compensation and Overtime Pay for Salaried positions Quarterly Bonus Program and Spot Bonus Program Pre-Tax Health Savings Account (HSA) with Match, and Pre-Tax Flexible Spending Account (FSA) Life Insurance Paid by Matrix and Buy-Up Options Short-Term and Long-Term Disability Plan Paid by Matrix Personal and Professional Growth: Technical, Managerial, and Administrative Career Paths Onboarding and Mentoring, Internal Training and Cross Training PE Certifications, Registration, and Renewals Assessments and Leadership Development External Certification Programs, Professional Memberships Tuition Reimbursement Program Recognition, Culture, and Other Perks: Regular Employee Updates and Town Halls, Annual Engagement Surveys Employee Service Awards and Peer Recognition Strong Fundamentals (Core Values) Employee Referral Program/Bonus Casual Dress Discount Programs Community Involvement Committee Sports Teams and Clubs We offer a competitive salary commensurate with experience, skills, and qualifications, ranging from $52,000 to $67,000 annually . The final salary will be determined based on various factors, including the candidate's experience and qualifications. Matrix Technologies, Inc. is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee based on race, color, religion, creed, national origin or ancestry, sex, age, physical or mental disability, veteran or military status, genetic information, sexual orientation, marital status, or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants.

SummaryEngineering is at the center of what we do, and we are looking for talented, innovative engineers who can help us design and develop products for today, tomorrow, and in the future. If you are a dreamer, doer, and inventor who wants your voice to be heard and see your ideas take flight, this is the opportunity for you. As a Sr Engineer on the LEAP Life Cycle Engineering (LCE) High Pressure Compressor (HPC) Design team, you will be responsible for activities that contribute to the design and development of products, solutions, and systems. This includes tasks related to the technical improvement of existing products and components. Your role will impact approaches, projects, and programs within the functional area or affected business organization, influencing ways of working. You will play a crucial role in enhancing the quality, efficiency, and effectiveness of your team, with significant input into setting priorities. Guided by professional practices and policies shaped by the role, you will have moderate autonomy and will be required to exercise high levels of operational judgment. Located in West Chester, Ohio, GE Aerospace's facility is a key hub for innovation and excellence in the aerospace industry. This site is dedicated to the design, development, and manufacturing of advanced aerospace technologies that power both commercial and military aircraft. The West Chester location is renowned for its commitment to Safety, Quality, Delivery, and Cost (SQDC), with safety being the highest priority. The facility boasts state-of-the-art equipment and a highly skilled workforce that drives continuous improvement and operational efficiency. As part of GE Aerospace's global network, the West Chester site plays a crucial role in advancing aviation technology and maintaining GE's leadership in the aerospace sector.Job Description Roles and Responsibilities Execute the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements for rotating parts. Developing specialized knowledge in their discipline. Serves as best practice/quality resource. Has awareness of latest technical developments in own area. Contributes towards strategy and policy development, and ensure delivery within area of responsibility. Has in-depth knowledge of best practices and how own area integrates with others; has working knowledge of competition and the factors that differentiate them in the market Uses judgment to make decisions or solve moderately complex tasks or problems in areas of operational/product management, manufacturing, technology or engineering. Takes new perspective on existing solutions. Uses technical experience and expertise for data analysis to support recommendations. Uses multiple internal and limited external sources outside of own function to arrive at decisions. Acts as a resource for colleagues with less experience. May lead small projects with moderate risks and resource requirements. Explains difficult or sensitive information; works to build consensus. Developing persuasion skills required to influence others on topics within field. Required Qualifications Bachelor's degree in engineering from an accredited university or college Minimum of 5 years of experience in Design Engineering Ability to work on site, remote work cannot be supported for this role. Legal authorization to work in the U.S. is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening. Desired Characteristics Strong rotor and/or airfoil design (HPC preferred) experience MRB certification or DR substantiation experience is preferred. Strong oral and written communication skills. Previous team lead experience is preferred. Strong interpersonal and leadership skills. Demonstrated ability to analyze and resolve problems. Demonstrated ability to lead programs / projects. Ability to document, plan, market, and execute programs. Established project management skills. This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Operates Computer Aided Design (CAD) computer system to create accurate, detailed drawings that AID in the manufacturing of Structural Insulated Panels (SIPS) and the construction of buildings. These detailed drawings typically incorporate the input of engineers, truss and beam suppliers, architects, designers and surveyors. Specific input can include engineered materials, dimensions, building codes, building materials, and production methods. Pay $23/hour and up depending on experience and qualifications. Hours are M-F 8:00AM - 5:00PM. This is non remote work job. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable an individual with disabilities to perform the essential duties. Other duties may be assigned including cross-training and/or working in other departments. Design floor plans to fit a SIP panel system using AutoCAD and a panelizing software (hsb CAD). Strong understanding of building materials and common building practices. Coordinates the collection of specific project data and incorporates this information into drawings. Consults in a professional and timely manner with customers, dealers, internal team members, architects, engineers, truss and beam suppliers and surveyors while preparing precise drawings. Responsible for maintaining an organized filing system for customer and production drawings. May be required to draw finished designs from sketches. Responsible for becoming familiar with a variety of the field's basic concepts, practices, and procedures. Modify and revise designs to correct deficiencies or to reduce production problems and repeated drafting errors. Accountable for providing prompt and accurate drafting support to customers, dealers, and other team members as needed or requested. Takes independent actions as needed to accomplish a 160,000 square foot of panel produced annually. Job Qualifications: Education and / or Experience: Two (2) years of post-secondary education in Drafting Technology including CAD instruction or equivalent experience of five (5) years. Skills: Strong technical knowledge of AutoCAD and AutoCAD techniques along with hsb CAD. Use of ForteWEB for the sizing of building materials. Common building knowledge, common building practices, procedures, and building components used in manufacturing and in building construction industries. Strong project management skills, communications skills and PC software skills with both Word and Excel. This document does not constitute an offer of employment or create an employment contract of any kind. Any job offer will not provide a contract other than an at-will relationship between Enercept Inc. and employee. Enercept has reviewed this job description to ensure that essential functions of the position have been included. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills, and abilities.

Operates Computer Aided Design (CAD) computer system to create accurate, detailed drawings that AID in the manufacturing of Structural Insulated Panels (SIPS) and the construction of buildings. These detailed drawings typically incorporate the input of engineers, truss and beam suppliers, architects, designers and surveyors. Specific input can include engineered materials, dimensions, building codes, building materials, and production methods. Pay $23/hour and up depending on experience and qualifications. Hours are M-F 8:00AM - 5:00PM. This is non remote work job. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable an individual with disabilities to perform the essential duties. Other duties may be assigned including cross-training and/or working in other departments. Design floor plans to fit a SIP panel system using AutoCAD and a panelizing software (hsb CAD). Strong understanding of building materials and common building practices. Coordinates the collection of specific project data and incorporates this information into drawings. Consults in a professional and timely manner with customers, dealers, internal team members, architects, engineers, truss and beam suppliers and surveyors while preparing precise drawings. Responsible for maintaining an organized filing system for customer and production drawings. May be required to draw finished designs from sketches. Responsible for becoming familiar with a variety of the field's basic concepts, practices, and procedures. Modify and revise designs to correct deficiencies or to reduce production problems and repeated drafting errors. Accountable for providing prompt and accurate drafting support to customers, dealers, and other team members as needed or requested. Takes independent actions as needed to accomplish a 160,000 square foot of panel produced annually. Job Qualifications: Education and / or Experience: Two (2) years of post-secondary education in Drafting Technology including CAD instruction or equivalent experience of five (5) years. Skills: Strong technical knowledge of AutoCAD and AutoCAD techniques along with hsb CAD. Use of ForteWEB for the sizing of building materials. Common building knowledge, common building practices, procedures, and building components used in manufacturing and in building construction industries. Strong project management skills, communications skills and PC software skills with both Word and Excel. This document does not constitute an offer of employment or create an employment contract of any kind. Any job offer will not provide a contract other than an at-will relationship between Enercept Inc. and employee. Enercept has reviewed this job description to ensure that essential functions of the position have been included. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills, and abilities. #hc199723