Plains All American Pipeline jobs in Carlsbad, NM - 8062 jobs

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. This position will perform installation, maintenance, calibration, troubleshooting, repairs, and system development for all systems including motor controls, distributive controls, PLC's, communications systems such as satellite, cellular, RF systems, SCADA operations maintenance and any other technical issues that may arise. KEY RESPONSIBILITIES: Provides I & E (instrumentation and electrical) support for assigned assets such as pipelines, compressor stations, and LACT units. Installs, inspects, troubleshoots, maintains, repairs, and calibrates wide variety of midstream instrumentation such as, but not limited to, flow meters, transmitters, sensors, analyzers, data loggers, programmable logic controller (PLCs), distributive control system (DCS). Installs, inspects, troubleshoots, maintains, and repairs electrical equipment such as, but not limited to, motor control centers, generators, transformers, switches, relays, wiring, electrical signal and communication systems, variable frequency drive (VFD), power distribution center (PDCs), uninterrupted power source (UPS). Configures and programs industrial control systems. Performs loops checks, point-to-point verification, and other testing regimes. Maintains complete, accurate and regulatory-compliant documentation. EDUCATION AND EXPERIENCE: High school diploma or GED required Valid driver's license required Must be able to pass drug test and background check Must be able to work 12-hour shifts including nights, weekends, and holidays SKILLS: Calibration: Develops ability to perform calibration on instruments with accuracy and precision in accordance with established procedures. Aware of environmental factors such as temperature, vibration, noise affecting calibration. Computerized Maintenance Management System (CMMS): Develops experience with software package with multiple maintenance functionalities such as equipment data management, preventative maintenance, work order system, scheduling planning, inventory control, asset tracking. Electrical Equipment & Electrical Distribution Network: Develops knowledge and practice experience with electrical components and workings of electric transmission and distribution network. Industrial Control Systems: Develops knowledge or and practical experience with devices to manage, command, direct or regulate behavior of other devices or systems. Includes, but not limited to, Supervisory Control and Data Acquisition (SCADA), Distributed Control Systems (DCS), Programmable Logic Controllers (PLC). Industrial Instrumentation Fundamentals: Develops practical knowledge of instrumentation used in midstream industry to measure, monitor, or control temperature, level, pressure, flow. Includes, but is not limited to temperature sensor, pressure gauges, pressure transmitter, pressure switch, flow transmitter, temperature controllers. Safety: Applies in difficult or complex situations ability to recognize safety risks in operational activities and use appropriate measures to control and manage identified risks. Safety Awareness: Ability to recognize and identify potential hazards. Evaluates changes in work environment with respect to impact on safety of self and others. Understands potential threats created by deviation from safety procedures and improper use of tools and equipment. Uses personal protection equipment. Uses tools and equipment in compliance with manuals and training. Calls attention to potential and actual hazardous conditions as they arise. Demonstrates knowledge of lockout/tag out procedures. Stops work if there are unsafe working conditions. Wireless Technologies: Develops knowledge of and practical experience with technologies and devices used in industrial applications to communicate information gathered from sensor locations through wireless links. #GP #GPOPS As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Bloomfield, New Mexico Additional locations: Job Requisition ID: 00019941 Location Address: 111 Road 4990 Education: High School (Required) Employee Group: Full time Employee Subgroup: Regular Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at ***************************** hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.

This position is for a Travel Cath Lab Technologist to work a 13-week assignment in The Woodlands, Texas, performing specialized cardiac catheterization procedures. Candidates must have at least 2 years of recent experience, be certified by ARRT or RCIS, and hold BLS and ACLS certifications. The role offers competitive weekly pay, comprehensive benefits starting day one, and other travel-related reimbursements. Spire is seeking a travel Cath Lab Technologist for a travel job in The Woodlands, Texas. Job Description & Requirements • Specialty: Cath Lab Technologist • Discipline: Allied Health Professional • Start Date: • Duration: 13 weeks • 36 hours per week • Shift: 12 hours, days • Employment Type: Travel 2+ years of recent Cath Lab Tech experience BLS, ACLS required ARRT or RCIS required About Spire Spire lives by the motto "Prescription before Diagnosis, equals malpractice" when it comes to recruiting healthcare professionals! Located in Atlanta, GA, Spire has been placing healthcare professionals across the US since 2013. Benefits • Weekly pay • 401k retirement plan • Mileage reimbursement • Referral bonus • Medical benefits • Dental benefits • Vision benefits • Benefits start day 1 • License and certification reimbursement Keywords: Cath Lab Technologist, travel healthcare jobs, cardiovascular technologist, cath lab technician, ARRT certification, RCIS certification, BLS ACLS required, cardiac catheterization, travel nursing benefits, healthcare travel jobs

As a subsidiary of Hanwha Energy, a global energy solutions company, Hanwha Convergence USA Corp. provides reliable Smart Factory Solution, Factory Automation, and renewable energy O&M (Operations and Maintenance) services to semi-conductor manufacturing as well as solar PV & battery energy storage system (BESS) power generation clients. Hanwha Convergence is an affiliate of Hanwha Group, which is the 7th largest business conglomerate in Korea. Hanwha Group is a world leader in solar energy and a Fortune Global 500 company. Position Summary:. We are seeking a strategic and technically proficient Technical Operations Manager to support and enhance the performance of Hanwha Convergence Operations & Maintenance (O&M) Division. This role is responsible for analyzing O&M operations, optimizing productivity and efficiency, and driving continuous improvement through SOP development and performance insights. The ideal candidate will serve as a key liaison between field operations, business development, and R&D teams to ensure operational excellence across all solar O&M initiatives. Attention external recruitment firms, we will not accept any unsolicited resumes at this time. Please do not contact any internal member of our company to discuss the position or to solicit candidates. Essential Duties and Responsibilities: Team Leadership & Department Oversight Lead and manage the Technical Operations Group, including direct supervision of group members. Define team objectives, allocate tasks, and ensure efficient collaboration across functions to support O&M operations. Oversee professional development, performance evaluations, and resource planning for technical staff. Operations Performance & Process Improvement Analyze overall O&M operations, productivity, and efficiency within Hanwha Convergence's O&M Division. Oversee and manage key performance indicators (KPIs) for power plant performance (Availability Guarantee, Performance Ratio and more), ensuring alignment with internal targets and customer expectations. Establish standard operating procedures (SOPs), performance objectives, quality control standards, and operational policies. Coordinate with internal business development and O&M teams to drive improvements through performance analysis. Field Operations & Commissioning Support Lead implementing O&M Contract obligations on performance reports. Work closely with the Remote Operations Center (ROC) for the implementation of daily customer reports and updates. Coordinate field operations and support the commissioning process for new solar PV, BESS plants and facilities. Analyze system integrity and operational efficiency, underperformance issues for customer-owned assets. Lead and support O&M analysis projects and assist corporate clients in implementing system and technology updates. Technology & Trend Analysis Conduct technology trend analysis related to utility-scale O&M and green energy control systems. Facilitate technical feedback between Hanwha Convergence field teams and the R&D team at headquarters to drive continuous improvement in service quality. Technical Marketing & Customer Interface Support business development teams with data-driven insights related to customer O&M needs and expectations. Assist in preparing technical recommendations, performance reports, and business development proposals. Collaborate with customers' technical teams to ensure alignment between their operational goals and Hanwha Convergence's service capabilities. Education and/or Experience Requirements: Bachelor's degree in Engineering, Renewable Energy, or a related technical field preferred. Experience leading technical teams or overseeing cross-functional project teams is strongly preferred. 5+ years of experience in solar energy, BESS operations, technical analysis, or O&M coordination. Familiarity with PV, BESS systems, commissioning processes, and performance analysis tools. Strong communication, organizational, and cross-functional coordination skills. Proficient in Excel, project management tools, and data reporting platforms is a must. Working knowledge of industry standards, codes, and safety regulations (e.g., NERC CIP) is a plus. Ability to interpret SCADA data, performance KPIs, and generate actionable insights from large data sets. Self-motivated, proactive, and able to manage multiple priorities in a fast-paced operational environment. Hanwha Convergence is proud to be an at-will Equal Opportunity Employer and prohibits discrimination against race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, pregnancy, citizenship, disability, protected veteran status and any other classification protected by applicable federal, state or local law. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. We are committed to the full inclusion of all qualified individuals. As part of this commitment, Hanwha Convergence will provide reasonable accommodations to all qualified individuals with disabilities to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment. Please contact us to request accommodations. Nothing in this statement shall imply implicitly or explicitly a guarantee of employment outside our at-will employment opportunity. You may view your privacy rights by reviewing Hanwha Convergence Privacy Policy here or contacting our HR Team for a copy.

A leading oil and gas services company based in Houston, TX is seeking a Senior Counsel with expertise in Regulatory Trade Compliance. This role involves providing legal advice on trade compliance issues, supporting regulatory inquiries, and assisting in the implementation of compliance programs. Ideal candidates have at least 10 years of legal experience, including expertise in regulatory trade compliance. This position requires strong communication skills and an active law license in the US. #J-18808-Ljbffr

🚨 We're Hiring: Outside Sales Representative | 🚧 📍 DFW| 🕒 Full-Time | Are you a driven, solutions-focused sales professional with experience in the construction industry? We're looking for a high-performing Outside Sales Representative to help grow our footprint by identifying, pursuing, and winning new bid opportunities across our territory. In this role, you'll build relationships with contractors, developers, architects, and public agencies, and work closely with internal teams to deliver tailored access solutions - from scaffolding and shoring to mast climbers and Quikdeck systems. 🔑 Key Responsibilities Prospect and identify bid opportunities across your sales territory. Build long-term relationships with GCs, subcontractors, developers, mechanical contractors, architects, and public agencies. Leverage tools like Salesforce and ConstructConnect to manage your sales pipeline and qualify incoming leads. Understand client needs and present access solutions that solve today's challenges - and anticipate future ones. Visit job sites to collect scope details and ensure accurate pricing. Collaborate with internal teams (Sales, Construction, Contracts, and Project Controls) to prepare comprehensive quotes and ensure seamless project execution. Support prequalification efforts to get us on bid lists and onboarded with new clients. Monitor and assess opportunities for upselling our full suite of access solutions: Quikdeck, HAKI, mast climbers, elevators, sidewalk protection, shoring, and more. Provide weekly activity updates to regional and branch leadership. ✅ What We're Looking For Proven experience in outside sales within the construction, scaffolding, or access services industries. Strong estimating skills and knowledge of labor-based access contracts. Proficiency in Salesforce and Excel; familiarity with construction CRM configurations is a plus. Hands-on industry background - whether in sales, estimating, engineering, or as a former builder/foreman. Bachelor's degree in Business, Civil Engineering, Construction Management, or a related field is preferred. 🎯 If you're ready to take the lead in building partnerships, closing deals, and delivering top-tier access solutions - we want to talk to you.

Move Coordinator - Houston, TX We are seeking a proactive and highly organised Move Coordinator to join our client's dynamic team, specialising in residential, commercial, and corporate relocations. Based in the Houston office, this exciting opportunity involves managing a diverse portfolio of moves, including national account household goods (HHG), office and industrial (O&I) sales, COD, and OA/DA shipments. Acting as the central liaison throughout the move process, you'll play a crucial role in delivering top-tier service across the relocation and moving industry. What You'll Be Doing: Serve as the primary point of contact for clients throughout the entire move lifecycle. Coordinate a mixture of national account HHG moves, O&I sales, COD, and OA/DA relocations. Liaise with internal departments, suppliers, and third-party agents to ensure seamless execution. Manage all stages of the move process, from pre-move surveys and packing to final delivery and post-move support. Prepare customised move plans and documentation aligned with specific client needs. Provide clients with consistent updates, instructions, and guidance throughout their relocation. Monitor move progress and proactively address any delays or challenges. Maintain detailed and accurate records in CRM systems, including communication logs and cost tracking. Oversee claims, feedback, and service recovery professionally and efficiently. Collaborate closely with sales and operational teams to ensure quality standards are met. Support continuous improvement initiatives and help develop internal best practices. Operate in a fast-paced, office-based environment with a focus on high-volume coordination. What We're Looking For: Previous experience in move coordination within the moving or relocation industry is essential. Strong knowledge of HHG, O&I, COD, and OA/DA move processes. Excellent communication and interpersonal skills with a customer-focused mindset. Highly organised with the ability to manage multiple moves and deadlines concurrently. Proven track record of handling pressure in a time-sensitive, client-facing role. Proficiency in CRM systems and Microsoft Office applications. Interested? Reach out to Alchemy Global Talent Solutions today.

The Manufacturing Operations Analyst will be responsible for maintaining data-related processes inside our ERP and production operation systems. This role involves working closely with the operations team to review expenses, labor, cost analysis, and provide data and tools to improve efficiency. The analyst will become an expert in our ERP system and serve as the go-to resource for the operations team. This is not a remote position but working in the Houston office instead of Abilene is a possibility. Duties & Responsibilities: Maintain the integrity of data in ERP and other operational systems. Ongoing Collaboration with operations leads and managers to establish and promote best practices for data collection. Work with the master scheduler to implement and maintain manufacturing schedules within the ERP system. Train operations staff on data entry and maintenance processes. Provide guidance on how to use existing reporting tools effectively. Make recommendations for new data tools and enhancements to existing tools based on in-depth knowledge of operational processes and existing systems. Conduct cost analysis and review labor expenses to identify areas for improvement. Develop and maintain reports to provide insights into operational efficiency. Answer queries from the management team and operations regarding data in our ERP system(s). Participate in the annual budget process, providing data and analysis to support budget planning and decision-making. Advocate for and implement data best practices across the organization. Foster a positive and proactive approach to data management. Qualifications and Education: Bachelor's degree in Finance, Economics, or a related field preferred. Proficiency in ERP systems and data management tools. Intermediate to advanced experience with Excel. Experience with reporting tools such as Power BI. Ability to work both independently and as part of a team. Strong communication and organizational skills (written and verbal). Self-starter with the ability to take direction and act independently. Strong problem-solving and analytical skills. Must possess good time management and prioritizing skills. Must possess good multi-tasking skills. Strong safety awareness. Education and Experience: Bachelor of Engineering or Engineering Technology degree and 3 years' experience with design of pressurized equipment OR Technical degree with minimum 5 years' experience with design of pressurized equipment Work Location: ABILENE, TX Work Environment & Physical Demands Physical demands : While performing the duties of this job, the employee is required to walk, sit, use hands to handle objects, tools or controls; reach with hands and arms; balance; stoop; talk and hear. The employee may occasionally lift and/or move up to 50 pounds waist high. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to focus. Work Environment : While performing the duties of this job, the employee is exposed to ambient room temperatures, lighting and traditional office equipment as found in a typical office. The noise level in the work environment will require hearing protection when in the manufacturing shops. Occasionally the employee may need to engage manufacturing workers in their work environment.

Aethon Energy Operating LLC's (“Aethon”) Sr. Lease Analyst is responsible for the analysis of leases, contracts, title opinions and other legal documentation to determine ownership in and ensure compliance with lease and contract obligations. DUTIES & JOB RESPONSIBILITIES: Set up, review, update and thoroughly and accurately analyze leases for developed and undeveloped assets and the same for mineral deeds, assignments, and various other contracts, with limited or no supervision Generate a variety of lease ownership reports as to depth, description, expiring acreage, gross/net acres, and payments - this is more senior work and not regular lease analyst work Monitor leases, contract obligations, and expirations Run calendars and pay rentals and extensions. Determine and make minimum royalty and complex shut-in payments For Texas leases, work with Unit Designations, Landmen and brokers to identify and tract out unit acreage in Enertia to accurately tie wells to the appropriate acreage For other leases, work closely with Division Order Analysts and Landmen to identify ties to wells, units and title issues Demonstrate proficiency in researching mineral interest owners from deeds, title opinions, conveyance documents and various title documents to process changes in mineral, royalty, and working interest Manage acquisition/conversion data setup and cleanup (determine and/or verify ownership, legal description, acreage, etc.) in assigned area of responsibility Support due diligence activities related to oil and gas property acquisition, divestiture, and mergers Oversee work done by contractors and brokers to ensure accuracy, and mentor less experienced land admin personnel Coordinate and communicate across departments and with landowners, governmental agencies, and field office personnel on issues Prepare Releases of Oil and Gas Leases and Assignments QUALIFICATIONS: Education & Work Experience: Bachelor's degree in Accounting, Finance, Economics, Energy Management, or equivalent land experience At least five years of related experience as a Lease Analyst or other land-related discipline. Technical Skills & Knowledge: Working knowledge of Haynesville assets Proficient at input and reporting in Enertia Land System Intermediate to Advanced proficiency in Microsoft Office (Word, Excel) Personal & Soft Skills: Ability to work in a fast-paced environment, prioritizing and working on numerous projects at the same time while balancing timely results with accuracy and attention to detail High level of motivation, self-starter Physical & Other Requirements: Must be eligible to work in the United States and have a valid driver's license Successful candidate will be able to meet company standard background check specific to individual role prior to employment and will be subject to Company Drug & Alcohol Program Position is an indoor office position which will require remaining in a stationary position, often sitting or standing for prolonged periods of time WE OFFER: Premiums for health, dental, and vision insurance for employee and children are 100% paid for by Aethon and premiums for spouse are 75% covered. 401k match 100% up to 7% of annual base salary Health Advocate to assist navigating your medical, dental, and vision insurance Company provided: Basic Life and AD&D Insurance Short- and Long-Term Disability Insurance Flexible telecommuting schedule (currently WFH on Monday and Friday) Paid Time Off 10 paid holidays annually Casual dress code Unlimited access to workout facilities within the building Wellness program with earned incentives for completed activities Please note that this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Employees must be willing and able to perform other duties as assigned. Duties, responsibilities, and activities may change at any time with or without notice. This position is subject to a Non-compete. Unfortunately, due to the high volume of applications, we are unable to acknowledge every applicant. Aethon does not accept unsolicited resumes from recruiters or employment agencies. In the event a recruiter or agency submits a resume or candidate without a previously signed agreement and approved engagement request, Aethon reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. Aethon is an equal opportunity employer. We are committed to the principles of being an equal opportunity employer and to providing our employees with a work environment free of discrimination and harassment. All employment decisions are based on qualifications, merit, and business need.

Calpine Corporation is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. Its fleet of 77 power plants in operation represents over 27,000 megawatts of generation capacity. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. Job Summary (includes but is not limited to the following, other duties may be assigned) This position is primarily responsible for managing DOT regulated pipeline compliance and security (TSA) for Calpine's Pipeline operations in CA, TX, OR and AZ. The Pipeline Compliance Manager develops and reviews pipeline procedures ensuring they conform to Federal and State regulations, industry practices, and related standards. Major programs include Operations and Maintenance, Integrity Management, Operator Qualifications (OQ), Emergency Response, and Public Awareness. This position manages third party regulatory compliance, safety, and environmental consultants as needed for conducting compliance activities. This position develops and conducts employee training and drills or tabletop exercises for pipeline emergency response, The ideal candidate for this position will be highly self-motivated and able to work independently to maintain the highest levels of safety and compliance and will have excellent verbal and written communication skills. Key Responsibilities Maintain in-depth knowledge of TSA Pipeline Security Guidelines and Directive requirements related to pipeline operations Manage pipeline site security program in accordance with TSA and corporate security requirements, including security vulnerability assessments, site criticality determinations, and implementation of security recommendations and site improvements Track and interpret DOT pipeline regulatory changes and implement program and procedure updates accordingly Develop and conduct pipeline emergency response training and drills at 16 DOT pipeline sites in CA, OR, AZ and TX Manage environmental compliance programs including hazardous materials/waste, SPCC, emissions monitoring, air permits Develop and maintain safety procedures and ensure compliance with applicable state and federal requirements Coordinate and track training both on-line and in-person to ensure compliance with applicable environmental, health and safety programs Maintain thorough knowledge of Pipeline Safety, Environmental, and Occupational Safety regulations at state, federal, and local level, as well as company programs to comply with those regulations Seasoned professional with advanced applied experience with full understanding of company and industry practices Provides leadership and works with management on identified Pipeline Safety, Environmental and Occupational Safety issues/recommendations/opportunities to foster continuous improvement of Calpine's Pipeline operations Provides advocacy and management of Pipeline Safety Compliance matters and limited responsibility for environmental and occupational safety regulatory development matters Makes decisions on complex issues regarding project and operational components and advanced tasks; makes recommendations on new procedures, tools and services; supports and contributes to development of new products, services or techniques Leads the research for innovations from external sources, and identifies opportunities to develop new processes and/or programs to ensure organization remains compliant Uses independent judgment on matters of significance in the areas of compliance, safety, and environmental conditions and practices Works on problems of increasing complexity (range from moderate to complex) Exercises discretion and uses independent judgment requiring in-depth analysis of variable factors. Collaborate with senior professionals in selection of methods, techniques, and analytical approach Little instruction on day-to-day work, general instructions on new assignments Serves as lead for development and execution of Pipeline Compliance and Safety programs Regularly coordinates work of professionals, technicians and others outside of own department Trains and mentor's employees on compliance, safety and technical skills Collaborate and solve problems - works with others to resolve significant issues, clarify or interpret complex information, provide initial screening/negotiations Builds professional networks, initiating contact with resources to achieve goals Regularly conducts training sessions and emergency response drills Job Requirements Bachelors' Degree, preferably in Environmental Services, Health or Safety Sciences, Technology/Engineering and 10+ years' experience or an equivalent combination of education and/or related experience Knowledge of applicable sections of federal, state and local rules and regulations to include PHMSA (including State versions), HAZWOPER, SARA, OSHA, Clean Air Act, AQMDs, CA Air Resources Board (CARB), Clean Water Act, SPCC Excellent verbal and written communication skills for interacting efficiently with both internal teams and external regulatory agencies Ability to analyze technical and regulatory information, make sound judgments, and provide prudent recommendations to all levels within the company Effectively manage third party compliance and environmental firms. Must be able to travel approximately 30% of the time Additional Calpine Information Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities. Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to *************************. Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP here

When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until 01/30/2026. Posting Your New Career, Delivered! Hot Job, Cool Benefits! AmeriGas, the nation's largest propane distributor, has immediate openings for safety-minded, customer-focused Service Technicians at a location near you! Are you looking for an exciting career with a nationally known company and industry leader? AmeriGas Propane, the largest distributor of propane in the United States, is searching for an energetic and customer service-oriented person to join us as a Service Technician. Responsibilities As a local Service Technician, you will play a vital role in installing and repairing propane tanks for our customers while ensuring the highest standards of safety and customer service. Duties include, but are not limited to: Safely operate a propane service vehicle with lift gate and boom along provided service routes Perform repairs on existing propane tanks for commercial and residential customers Install new propane tanks/systems for commercial and residential customers On an as-needed basis, perform Delivery Representative functions, such as delivering bulk or canister propane Perform all daily functions in a safe manner by adhering to all federal and state codes and regulations in addition to all AmeriGas Safety and Operations Policies and Procedures Consistent use of required Personal Protective Equipment Depending on fluctuating needs, work 8 to 12-hour shifts What's In It for You? Home every day 17 PTO days plus 7 paid holidays $5,000 sign-on bonus Ongoing safety incentives Career advancement opportunities and annual performance reviews Uniforms provided Year-round medical coverage available as well as: 401k with company match, propane discount year-round, paid holidays and paid vacation Requirements All Service Technicians should have a valid class A or B CDL with hazmat and tanker endorsements Acceptable driving record Satisfactory completion of a DOT physical, drug test and background check Willingness to work outdoors in all weather conditions Ability to lift up to 70lbs AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $30.68 to $31.68, depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

Operator will be required to set-up, operate, and to adjust machines and equipment in order to produce a good quality product. Examples of machines and equipment are, but not limited to, electric welder, coil feeder, jib crane, welding fixtures, and other departmental equipment. Will be required to set-up, operate, program, and trouble shoot (material handling, drilling, and welding) of other pieces of equipment in the welding process to achieve acceptable levels in productivity, and quality. Operator will need to know how to operate overhead crane, forklift, hand held grinder, and other department equipment Responsible for welding steel and aluminum components to assemble structural forms A Day In The Life Knowledge and technique of MIG welding Must have the ability to read a tape measure Ability to regularly move, twist, bend, and crouch while working Dependable with a good attendance record Mechanical aptitude Ability to read blue prints and weld assemblies to comply with the engineering standards Experience with a handheld plasma cutter a plus Will be required to perform various other duties in the department, such as but not limited to, operate other welding equipment, use of various hand tools, and pieces of equipment designed for material handling. Follow all safety precautions, process procedures, and all supervisors instructions. What will help you thrive in this role? Layout, align, fit and weld fabricated steel and aluminum components Read and understand blueprints Strong attention to detail in regards to alignment, dimensions, and general inspection Perform work involving close tolerances that require constant attention while making adjustments to perform properly May be required to perform various other duties in the department, such as but not limited to, operate other welding equipment, use of various hand tools, and pieces of equipment designed for material handling. Follow all safety precautions, process procedures, and all supervisors instructions. Performing job safely while utilizing all personal protective equipment. Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class.

A leading marine transportation company is seeking a Trip Pilot for safe operation and navigation of its vessels. The role involves overseeing crew activities, ensuring compliance with regulations, and maintaining professionalism with charterers. Ideal candidates must hold a valid Merchant Mariner's document, possess operational management skills, and have leadership capabilities. This position offers a competitive environment adhering to strict operational procedures. #J-18808-Ljbffr

Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country's largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The position's purpose is to bill customers as quickly and as accurately as possible after receiving all the required documentation. Primary Duties /Responsibilities: * Engage with the Technical Customer Advisor to understand when a job has been carried out. * Match manifest with original job request in RPM. Confirm this with the Technical Customer Advisor. * Escalate to Technical Customer Advisor for speedy resolution in the event of issues. * Create and issue the invoice. * Respond to any billing queries (that would first come through the Customer Technical Advisor). Qualifications Education / Experience / Background: * Invoicing and/ or other financial experience * Experience of using computer invoicing systems or similar * Sufficient understanding of waste streams, transportation and disposal or the ability to build this understanding * High School Diploma Knowledge / Skills / Abilities: * Very numerate * High attention to detail * Very organized and efficient * Knowledge of, or ability to build knowledge of, the hazardous waste business * Able to work collaboratively across different functions and to secure help from colleagues Additional Information Benefits: Veolia's comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Authorization to work lawfully in the US without sponsorship from Wood is required. Responsibilities Read, understand and follow safety manuals Has basic knowledge of pumps (centrifugal and piston) Can work as a group and by their self Can do physical work Can work at heights Understands mechanics Can work with a variety of tools Understands lifting and rigging Understands how to work around mobile equipment Can operate man lift and forklift. Qualifications Mechanically inclined Ability to self-motivate and work independently under little supervision Responsible and diligent Safety-conscious Personal computer experience or willingness to learn Previous oilfield experience No supervisory responsibilities High school diploma or equivalent required Safety-sensitive position subject to random drug and alcohol screening

Full-time Description Killam Ranch Properties - Ranch Hand Summary: Killam Ranch Properties is seeking an experienced Ranch Hand. Candidates must be able to care for livestock and perform daily grounds maintenance. Must be knowledgeable in caring for cattle & deer and know how to drive a tractor. Valid driver's license is a must, will include working weekends. Candidates will be subject to background and drug testing. Candidate must be willing to live on the Ranch. Requirements Full Description: Ranch Hand duties would include riding pastures to check for sick cattle, horses and other large animals. Assisting with doctoring sick animals as needed, fence repair, shredding, tree trimming and any other Ranch maintenance as needed per ranch manager. Must be able to operate large equipment, mainly tractors and have knowledge of working cattle and horses. Other helpful skills, would include, general knowledge about maintenance of machinery, safety of this machinery and welding skills. Person must be self- motivated, responsible and someone who takes initiative and sees things that need to be taken care of and report them to the ranch manager; must be able to work well on your own and with a team. Physical requirements include ability to frequently lift 50 pounds and do a lot of walking, bending, and riding etc. Benefits: Competitive Salary Medical/Dental Insurance Benefits 401K Housing Available

is based in the Midland, TX area *** Detailed Description: Develop relationships and contact customer decision-makers to generate business for MSD Adhere to the Company's Code of Business Conduct and Ethics Represent the Company and our values with integrity while maintaining the highest ethical and legal standards with all customer interactions Demonstrate financial responsibility in adherence to the Company's travel and entertainment policy Regularly visit (drive to) customer locations to develop relationships, and contact customer decision-makers to generate business for MSD Prepare written reports, cost benefit analysis, solution-oriented presentations, and sales and price quotations to compete for customer business Ensure systematic delivery and resolution of customer inquiries and information gathered about customer satisfaction to the appropriate Company personnel/departments Develop, demonstrate and deliver value cases for different levels of customer Develop new prospects, and interact with existing customers, to increase sales, products, and/or services across all types of well servicing Assess the potential application of Company products or services, and offer solutions that meet customer needs Conduct intelligence gathering on current and potential customers and competitors. Communicate and coordinate with Operations, to understand activity levels, equipment utilization, competitive advantages, growth strategy and customer satisfaction. Work directly with operations to identify and improve upon daily operations to continually drive towards Operational Excellence Develop positive relationships with other employees in Operations, Marketing, Product Development, and other departments as needed Use technical knowledge of product offerings to support and build sales Communicate customer feedback into future product developments Represent the Company in the marketplace through various industry organizations (SPE, AADE, IADC, etc.) and other industry events Keep well-informed on current industry trends, opportunities, products and competitive issues Self-driven to ensure MSD is being represented every day in a manner consistent with the Company's Core Values. Attend and participate in sales meetings, product seminars, trade shows and professional organizations as appropriate Position MSD as a market leader within the industry Develop strong long-lasting relationships at every level within customer's organization. Keep accurate track of AR Invoices and ensure timely payment from customers Job Requirements: Excellent business prospecting skills and strong negotiation skills Strong relationship builder Excellent communication and presentation skills Ability to function in a high-pressure environment, and to respond well to a high level of stress Ability to make well informed decisions within tight time constraints consistent with the Company's Core values Ability to work weekends and/or additional hours that are needed to complete specific job tasks Ability to travel on a regular basis Minimum Qualifications: High School Diploma or GED 3+ years business development or sales experience Eligible to meet requirements to drive on Company business Preferred Qualifications: Bachelor's Degree in Business Management, Marketing or a related field Prior energy services sales experience Proven Permian sales history Directional Drilling Sales experience Additional Details: Variable work hours include regular after-hours, weekend, and holiday commitments as well as regular travel within and outside assigned region. The Sales Representative must work with an emphasis and prioritization to maintain a professional attitude when interacting with all Company and customer representatives. Must be able to work closely with others and manage customer interaction in a professional manner.

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

3 + years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently. Must have a valid TWIC card Locates and marks reference points for columns or plates on foundation, sing master straight edge, squares, transit and measuring tape and applying knowledge of geometry. Attaches rigging or signals crane operator to lift components to specified position. Aligns structures or plates sections to assemble boiler frame, tanks or vats sing plumb bobs, levels, wedges, dogs or turnbuckles. Hammers, flame-cuts, files grinds irregular edges of sections or structural parts to facilitate fitting edges together. Bolts or arc-welds structures and sections together. Positions drums and headers into supports or bolts or welds supports to frame. Aligns water tubes, connects and expands ends to drums and headers using tube expander. Bolts or welds casing sections, uptakes, stacks, baffles and such fabricated parts as chutes, air heaters, fan stands, feeding tube, cat walks, ladders, coal hoppers and safety hatch to frame using wrenches Performs minor maintenance or cleaning activities with tools and equipment. Installs manholes, handholds, valves, gauges and feed water connection in drums to complete assembly of water tube boilers. Signals crane operator in lifting parts to specific positions. Assists in testing assembled vessels by pumping water or gas under specified pressure into vessels and observing instruments for evidence of leakage. Repairs boilers or tanks in field by unbolting or flame cutting defective sections or tubes, straightening plates using torch or jacks, installing new tubes, fitting and welding new sections and replacing worn lugs on bolts. May fasten and caulk sections of vessels, using pneumatic fasteners and caulking hammers. May line firebox with refractory brick and blocks. May fabricate parts such as, stacks, uptakes, and chutes to adapt boiler to premises in which it is installed. Flame cutting and knowledge of torch use. Responsible for observing and complying with all safety and project rules. Performs other duties as required.

Patient Experience Consultant Bring your passion to Texas Health so we are Better + Together Work Hours\: Full Time Days (8\:00am-5\:00pm) for 40 hrs/week (remote work allowed at manager's discretion) Department Highlights: Remote Position Gain a sense of accomplishment by contributing to a teamwork environment. Receive excellent mentorship, comprehensive training, and dedicated leadership resources. What You Will Do Serves as knowledge, quality and process expert on patient experience improvement. Acts as point of contact for facilities and responds to patient experience inquiries related to measures, analysis, support and interventions. Plans and provides training, expert coaching and observation, knowledge assessment, and skill validation in patient experience improvement for all levels of the organization. Communicates all requirements and commitments for each project. Prepares and presents both oral and written reports and presentations on the progress of the facilities in meeting their patient experience goals. Aids in monitoring, reporting and analyzing patient experience data in order to identify priorities and opportunities for improvement, and reporting on findings to key stakeholders. 60% Serves as a change agent on patient experience. Partners with directors and other coaches to establish and sustain Texas Health? s patient experience strategic plan. Adopts a proactive approach to identify risk to plan success. Develops and organizes tools, processes and procedures that can be utilized across the system to ensure positive patient experiences. In collaboration with Patient and Family Experience leadership, interfaces with key leadership constituencies to help drive system performance. Applies evidence based knowledge of performance improvement, survey instruments and methodology to work. 15% Leads, facilitates, or participates in facility patient experience teams and improvement activities as assigned or approved by director. Supports other teams? work in relation to patient experience outcomes, and supports integration of process improvements across system. 20% Other duties and functions as may be assigned. 5% What You Need\: Education Bachelor's Degree Business, health care, or related field. Req Experience 3 Years Experience consulting or coaching evidence-based best practices in patient experience in a health care setting with demonstrated results in improving and sustaining patient satisfaction scores. Req EducationBachelor's Degree Business, health care, or related field. ReqExperience3 Years Experience consulting or coaching evidence-based best practices in patient experience in a health care setting with demonstrated results in improving and sustaining patient satisfaction scores. ReqSkills Must have excellent communication and presentation skills ? written and oral; communicating in an open, honest and objective manner. Excellent interpersonal skills, with the ability to interact effectively with a wide variety of stakeholders (including front line staff, senior management, department leaders, clinical staff and physicians) to creatively solve problems, guide and influence people, effectively manage time, operate as a self-starter by being proactive and assertive. Ability to develop and maintain a high level of expertise in the concepts, practice and evolution of service excellence by serving as a trusted subject matter expert and change agent. Ability to manage multiple projects and meet multiple deadlines with excellent organizational and project management skills and a strong attention to detail. Demonstrated experience in patient satisfaction data analysis, report preparation with the ability to deliver effective professional presentations to various groups in order to help motivate and inspire improvement. Requires knowledge of H-CAHPS, CG-CAHPS, and other such patient experience surveys in the public domain that impact public reporting and value-based reimbursement. Strong computer literacy and software experience ? Word, PowerPoint, Excel, Adobe Acrobat. Ability to travel to all entity locations throughout the geographic service area covered by Texas Health Resources.SupervisionIndividual ContributorADA RequirementsWorking Outdoors 67% or more Working Indoors 67% or more Physical DemandsSedentaryTravel RequirementsLocal 80%