Controls Technician jobs at Plain - 89 jobs

A leading advertising technology company is seeking a Senior Machine Learning Engineer to design and implement large-scale ML systems in San Francisco. Candidates should have an M.S or Ph.D. in Computer Science with relevant industry experience, strong programming skills in Python or Java, and proficiency in ML algorithms. The salary range is $186,900 - $217,200, along with a performance bonus and comprehensive benefits package. This is a hybrid role requiring candidates to reside within 60 miles of San Francisco. #J-18808-Ljbffr

Mantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility-inside and out-and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. As a Controls Tech II on our team, you will be responsible for installing and servicing Building Automation Systems, including project start-up, commissioning, routine and emergency service, and preventive maintenance. This role is tied to data center projects in Dickens County, Texas, (near Lubbock, TX) and requires relocation to the area if you are not within driving distance. Relocation assistance may be provided for qualified candidates. We're looking for individuals who are ready to make a move and join the cutting-edge of data center BMS development. Our team at Mantis Innovation is known for solving the toughest BMS problems in the industry, while providing best-in-class service and partnership to our clients. As a Controls Tech II on our team, you will be responsible for installing and servicing Building Automation Systems, including project start-up, commissioning, routine and emergency service, and preventive maintenance that supports Responsibilities Service of existing building control systems. Startupof complete building control systems. Install building control components(controllers, panels, conduit, sensors, etc.) Low voltage control panel building. Work closely with our installation subcontractors and coordinate work with them to ensure projects are completed on time as per code, standards and contract requirements. Perform a point-to-point checkout per standard procedures. Perform software/hardware calibration required for proper equipment and system operation. Perform low voltage cable installation/termination for small projects if needed. Take on project commissioning activities to include daily meetings and documenting results. Qualifications Ability to own a task from beginning to end. Effectively communicating progress and/or issues about assigned task. Can work both independently and as a part of a team. Must be able to multi-task, it is very probable you will be assigned multiple tasks over multiple customers at any given time. Basic proficiency in Microsoft suite (Word, Outlook, Visio, Excel, PowerPoint) Can read schematics (network topologies, electrical one-lines, device wiring drawings, control drawings, etc...) Familiarity with CAD, construction drawings Strong understanding of open protocols (For Example... BACnet IP/BACnet MSTP/Modbus TCP/Modbus RTU) Knowledge of terminating wire to terminal blocks to include RS-232, RS-485 and CAT 5/6 Troubleshooting skills, the ability to understand a problem and work toward reasonable solutions Maintain proper understandings of code requirements for indoor and outdoor electrical infrastructure, and knowledge of handling higher voltage (120, 240, 480V) for controls purposes Has had experience with BMS software, Tridium is preferred and understands wire sheet programming and logic. Basic networking, ability to manipulate pc settings to access, set up and commission devices on a network. Ability to visit job construction hard hat areas and climb stairs, climb ladders, maneuver in and around pipework and air ducts and work safely near exposed line voltage and low voltage wiring and terminations. Possess valid state motor vehicle license and possess safe driving record as required by company's insurance carrier. Able to pass State and Federal security screening. Out-of-state travel will be required (estimated to be between 25% - 30% throughout the year) Understanding of Mechanical and Electrical equipment in a typical Data Center application Note: Employees are held accountable for all duties of this job. This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position. What else can we offer you?We offer a fantastic lineup of benefits, including Medical, Dental, Vision, FSA, HSA, 401k Matching, Paid Vacation, Paid Sick, Paid Holidays, Paid Parental Leave, Paid Short Term & Long Term Disability, Tuition Reimbursement, and a flexible hybrid work schedule (for office-based employees). Working at Mantis also brings tremendous professional development opportunities that allow you to make a real impact on both the company and your career! Not sure you meet every single requirement?Studies show that women and individuals from underrepresented groups often hesitate to apply unless they check every box. At Mantis, we're committed to building an inclusive and equitable team-so if this role excites you, we'd love to hear from you, even if your experience doesn't match every single qualification. Mantis Innovation is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Mantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility-inside and out-and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. As a Controls Tech II and/or III on our team, you will be responsible for installing and servicing Building Automation Systems, including project start-up, commissioning, routine and emergency service, and preventive maintenance. This role will require 100% permanent relocation to one of the following locations ASAP: Ashburn, VA Atlanta, GA Lubbock, TX Starting around March 2026 we will need people in: Oregon (city TBD) Washington (city TBD) California (city TBD) If you are not open to relocating to one of the areas above, please still apply as we might have other positions that open later with more flexible location options. Responsibilities * Service of existing building control systems. * Startupof complete building control systems. * Install building control components(controllers, panels, conduit, sensors, etc.) * Low voltage control panel building. * Work closely with our installation subcontractors and coordinate work with them to ensure projects are completed on time as per code, standards and contract requirements. * Perform a point-to-point checkout per standard procedures. * Perform software/hardware calibration required for proper equipment and system operation. * Perform low voltage cable installation/termination for small projects if needed. * Take on project commissioning activities to include daily meetings and documenting results. Qualifications * Ability to own a task from beginning to end. Effectively communicating progress and/or issues about assigned task. * Can work both independently and as a part of a team. * Must be able to multi-task, it is very probable you will be assigned multiple tasks over multiple customers at any given time. * Basic proficiency in Microsoft suite (Word, Outlook, Visio, Excel, PowerPoint) * Can read schematics (network topologies, electrical one-lines, device wiring drawings, control drawings, etc...) * Familiarity with CAD, construction drawings * Strong understanding of open protocols (For Example... BACnet IP/BACnet MSTP/Modbus TCP/Modbus RTU) * Knowledge of terminating wire to terminal blocks to include RS-232, RS-485 and CAT 5/6 * Troubleshooting skills, the ability to understand a problem and work toward reasonable solutions * Maintain proper understandings of code requirements for indoor and outdoor electrical infrastructure, and knowledge of handling higher voltage (120, 240, 480V) for controls purposes * Has had experience with BMS software, Tridium is preferred and understands wire sheet programming and logic. * Basic networking, ability to manipulate pc settings to access, set up and commission devices on a network. * Ability to visit job construction hard hat areas and climb stairs, climb ladders, maneuver in and around pipework and air ducts and work safely near exposed line voltage and low voltage wiring and terminations. * Possess valid state motor vehicle license and possess safe driving record as required by company's insurance carrier. * Able to pass State and Federal security screening. * Out-of-state travel will be required (estimated to be between 25% - 30% throughout the year) * Understanding of Mechanical and Electrical equipment in a typical Data Center application $140,000 - $180,000 a year * The above pay range is Total Cash; a combination of base salary (dependent upon experience/Tech level) and additional bonus potential through internal programs (annual bonus, living expenses, profit sharing) This role is open to and may offer additional compensation in the form of relocation assistance to candidates willing to relocate permanently Note: Employees are held accountable for all duties of this job. This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position. What else can we offer you? We offer a fantastic lineup of benefits, including Medical, Dental, Vision, FSA, HSA, 401k Matching, Paid Vacation, Paid Sick, Paid Holidays, Paid Parental Leave, Paid Short Term & Long Term Disability, Tuition Reimbursement, and a flexible hybrid work schedule (for office-based employees). Working at Mantis also brings tremendous professional development opportunities that allow you to make a real impact on both the company and your career! Not sure you meet every single requirement? Studies show that women and individuals from underrepresented groups often hesitate to apply unless they check every box. At Mantis, we're committed to building an inclusive and equitable team-so if this role excites you, we'd love to hear from you, even if your experience doesn't match every single qualification. Mantis Innovation is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Mantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility-inside and out-and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. As a Controls Tech II and/or III on our team, you will be responsible for installing and servicing Building Automation Systems, including project start-up, commissioning, routine and emergency service, and preventive maintenance. This role will require 100% permanent relocation to one of the following locations ASAP:Ashburn, VAAtlanta, GALubbock, TX Starting around March 2026 we will need people in: Oregon (city TBD) Washington (city TBD) California (city TBD) If you are not open to relocating to one of the areas above, please still apply as we might have other positions that open later with more flexible location options. Responsibilities Service of existing building control systems. Startupof complete building control systems. Install building control components(controllers, panels, conduit, sensors, etc.) Low voltage control panel building. Work closely with our installation subcontractors and coordinate work with them to ensure projects are completed on time as per code, standards and contract requirements. Perform a point-to-point checkout per standard procedures. Perform software/hardware calibration required for proper equipment and system operation. Perform low voltage cable installation/termination for small projects if needed. Take on project commissioning activities to include daily meetings and documenting results. Qualifications Ability to own a task from beginning to end. Effectively communicating progress and/or issues about assigned task. Can work both independently and as a part of a team. Must be able to multi-task, it is very probable you will be assigned multiple tasks over multiple customers at any given time. Basic proficiency in Microsoft suite (Word, Outlook, Visio, Excel, PowerPoint) Can read schematics (network topologies, electrical one-lines, device wiring drawings, control drawings, etc...) Familiarity with CAD, construction drawings Strong understanding of open protocols (For Example... BACnet IP/BACnet MSTP/Modbus TCP/Modbus RTU) Knowledge of terminating wire to terminal blocks to include RS-232, RS-485 and CAT 5/6 Troubleshooting skills, the ability to understand a problem and work toward reasonable solutions Maintain proper understandings of code requirements for indoor and outdoor electrical infrastructure, and knowledge of handling higher voltage (120, 240, 480V) for controls purposes Has had experience with BMS software, Tridium is preferred and understands wire sheet programming and logic. Basic networking, ability to manipulate pc settings to access, set up and commission devices on a network. Ability to visit job construction hard hat areas and climb stairs, climb ladders, maneuver in and around pipework and air ducts and work safely near exposed line voltage and low voltage wiring and terminations. Possess valid state motor vehicle license and possess safe driving record as required by company's insurance carrier. Able to pass State and Federal security screening. Out-of-state travel will be required (estimated to be between 25% - 30% throughout the year) Understanding of Mechanical and Electrical equipment in a typical Data Center application This role is open to and may offer additional compensation in the form of relocation assistance to candidates willing to relocate permanently Note: Employees are held accountable for all duties of this job. This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position. What else can we offer you?We offer a fantastic lineup of benefits, including Medical, Dental, Vision, FSA, HSA, 401k Matching, Paid Vacation, Paid Sick, Paid Holidays, Paid Parental Leave, Paid Short Term & Long Term Disability, Tuition Reimbursement, and a flexible hybrid work schedule (for office-based employees). Working at Mantis also brings tremendous professional development opportunities that allow you to make a real impact on both the company and your career! Not sure you meet every single requirement?Studies show that women and individuals from underrepresented groups often hesitate to apply unless they check every box. At Mantis, we're committed to building an inclusive and equitable team-so if this role excites you, we'd love to hear from you, even if your experience doesn't match every single qualification. Mantis Innovation is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Mantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility-inside and out-and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. As a Controls Tech II and/or III on our team, you will be responsible for installing and servicing Building Automation Systems, including project start-up, commissioning, routine and emergency service, and preventive maintenance. This role will require 100% permanent relocation to one of the following locations ASAP:Ashburn, VAAtlanta, GALubbock, TX Starting around March 2026 we will need people in: Oregon (city TBD) Washington (city TBD) California (city TBD) If you are not open to relocating to one of the areas above, please still apply as we might have other positions that open later with more flexible location options. Responsibilities Service of existing building control systems. Startupof complete building control systems. Install building control components(controllers, panels, conduit, sensors, etc.) Low voltage control panel building. Work closely with our installation subcontractors and coordinate work with them to ensure projects are completed on time as per code, standards and contract requirements. Perform a point-to-point checkout per standard procedures. Perform software/hardware calibration required for proper equipment and system operation. Perform low voltage cable installation/termination for small projects if needed. Take on project commissioning activities to include daily meetings and documenting results. Qualifications Ability to own a task from beginning to end. Effectively communicating progress and/or issues about assigned task. Can work both independently and as a part of a team. Must be able to multi-task, it is very probable you will be assigned multiple tasks over multiple customers at any given time. Basic proficiency in Microsoft suite (Word, Outlook, Visio, Excel, PowerPoint) Can read schematics (network topologies, electrical one-lines, device wiring drawings, control drawings, etc...) Familiarity with CAD, construction drawings Strong understanding of open protocols (For Example... BACnet IP/BACnet MSTP/Modbus TCP/Modbus RTU) Knowledge of terminating wire to terminal blocks to include RS-232, RS-485 and CAT 5/6 Troubleshooting skills, the ability to understand a problem and work toward reasonable solutions Maintain proper understandings of code requirements for indoor and outdoor electrical infrastructure, and knowledge of handling higher voltage (120, 240, 480V) for controls purposes Has had experience with BMS software, Tridium is preferred and understands wire sheet programming and logic. Basic networking, ability to manipulate pc settings to access, set up and commission devices on a network. Ability to visit job construction hard hat areas and climb stairs, climb ladders, maneuver in and around pipework and air ducts and work safely near exposed line voltage and low voltage wiring and terminations. Possess valid state motor vehicle license and possess safe driving record as required by company's insurance carrier. Able to pass State and Federal security screening. Out-of-state travel will be required (estimated to be between 25% - 30% throughout the year) Understanding of Mechanical and Electrical equipment in a typical Data Center application This role is open to and may offer additional compensation in the form of relocation assistance to candidates willing to relocate permanently Note: Employees are held accountable for all duties of this job. This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position. What else can we offer you?We offer a fantastic lineup of benefits, including Medical, Dental, Vision, FSA, HSA, 401k Matching, Paid Vacation, Paid Sick, Paid Holidays, Paid Parental Leave, Paid Short Term & Long Term Disability, Tuition Reimbursement, and a flexible hybrid work schedule (for office-based employees). Working at Mantis also brings tremendous professional development opportunities that allow you to make a real impact on both the company and your career! Not sure you meet every single requirement?Studies show that women and individuals from underrepresented groups often hesitate to apply unless they check every box. At Mantis, we're committed to building an inclusive and equitable team-so if this role excites you, we'd love to hear from you, even if your experience doesn't match every single qualification. Mantis Innovation is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Mantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility-inside and out-and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. As a Controls Tech II and/or III on our team, you will be responsible for installing and servicing Building Automation Systems, including project start-up, commissioning, routine and emergency service, and preventive maintenance. This role will require 100% permanent relocation to one of the following locations ASAP:Ashburn, VAAtlanta, GALubbock, TX Starting around March 2026 we will need people in: Oregon (city TBD) Washington (city TBD) and possibly California (city TBD) If you are not open to relocating to one of the areas above, please still apply as we might have other positions that open later with more flexible location options. Responsibilities Service of existing building control systems. Startupof complete building control systems. Install building control components(controllers, panels, conduit, sensors, etc.) Low voltage control panel building. Work closely with our installation subcontractors and coordinate work with them to ensure projects are completed on time as per code, standards and contract requirements. Perform a point-to-point checkout per standard procedures. Perform software/hardware calibration required for proper equipment and system operation. Perform low voltage cable installation/termination for small projects if needed. Take on project commissioning activities to include daily meetings and documenting results. Qualifications Ability to own a task from beginning to end. Effectively communicating progress and/or issues about assigned task. Can work both independently and as a part of a team. Must be able to multi-task, it is very probable you will be assigned multiple tasks over multiple customers at any given time. Basic proficiency in Microsoft suite (Word, Outlook, Visio, Excel, PowerPoint) Can read schematics (network topologies, electrical one-lines, device wiring drawings, control drawings, etc...) Familiarity with CAD, construction drawings Strong understanding of open protocols (For Example... BACnet IP/BACnet MSTP/Modbus TCP/Modbus RTU) Knowledge of terminating wire to terminal blocks to include RS-232, RS-485 and CAT 5/6 Troubleshooting skills, the ability to understand a problem and work toward reasonable solutions Maintain proper understandings of code requirements for indoor and outdoor electrical infrastructure, and knowledge of handling higher voltage (120, 240, 480V) for controls purposes Has had experience with BMS software, Tridium is preferred and understands wire sheet programming and logic. Basic networking, ability to manipulate pc settings to access, set up and commission devices on a network. Ability to visit job construction hard hat areas and climb stairs, climb ladders, maneuver in and around pipework and air ducts and work safely near exposed line voltage and low voltage wiring and terminations. Possess valid state motor vehicle license and possess safe driving record as required by company's insurance carrier. Able to pass State and Federal security screening. Out-of-state travel will be required (estimated to be between 25% - 30% throughout the year) Understanding of Mechanical and Electrical equipment in a typical Data Center application *The above pay range is Total Cash; a combination of base salary (dependent upon experience/Tech level) and additional bonus potential through internal programs (annual bonus, living expenses, profit sharing) This role is open to and may offer additional compensation in the form of relocation assistance to candidates willing to relocate permanently Note: Employees are held accountable for all duties of this job. This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position. What else can we offer you?We offer a fantastic lineup of benefits, including Medical, Dental, Vision, FSA, HSA, 401k Matching, Paid Vacation, Paid Sick, Paid Holidays, Paid Parental Leave, Paid Short Term & Long Term Disability, Tuition Reimbursement, and a flexible hybrid work schedule (for office-based employees). Working at Mantis also brings tremendous professional development opportunities that allow you to make a real impact on both the company and your career! Not sure you meet every single requirement?Studies show that women and individuals from underrepresented groups often hesitate to apply unless they check every box. At Mantis, we're committed to building an inclusive and equitable team-so if this role excites you, we'd love to hear from you, even if your experience doesn't match every single qualification. Mantis Innovation is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Mantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility-inside and out-and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. As a Controls Tech II and/or III on our team, you will be responsible for installing and servicing Building Automation Systems, including project start-up, commissioning, routine and emergency service, and preventive maintenance. This role will require 100% permanent relocation to one of the following locations ASAP:Ashburn, VAAtlanta, GALubbock, TX Starting around March 2026 we will need people in: Oregon (city TBD) Washington (city TBD) California (city TBD) If you are not open to relocating to one of the areas above, please still apply as we might have other positions that open later with more flexible location options. Responsibilities Service of existing building control systems. Startupof complete building control systems. Install building control components(controllers, panels, conduit, sensors, etc.) Low voltage control panel building. Work closely with our installation subcontractors and coordinate work with them to ensure projects are completed on time as per code, standards and contract requirements. Perform a point-to-point checkout per standard procedures. Perform software/hardware calibration required for proper equipment and system operation. Perform low voltage cable installation/termination for small projects if needed. Take on project commissioning activities to include daily meetings and documenting results. Qualifications Ability to own a task from beginning to end. Effectively communicating progress and/or issues about assigned task. Can work both independently and as a part of a team. Must be able to multi-task, it is very probable you will be assigned multiple tasks over multiple customers at any given time. Basic proficiency in Microsoft suite (Word, Outlook, Visio, Excel, PowerPoint) Can read schematics (network topologies, electrical one-lines, device wiring drawings, control drawings, etc...) Familiarity with CAD, construction drawings Strong understanding of open protocols (For Example... BACnet IP/BACnet MSTP/Modbus TCP/Modbus RTU) Knowledge of terminating wire to terminal blocks to include RS-232, RS-485 and CAT 5/6 Troubleshooting skills, the ability to understand a problem and work toward reasonable solutions Maintain proper understandings of code requirements for indoor and outdoor electrical infrastructure, and knowledge of handling higher voltage (120, 240, 480V) for controls purposes Has had experience with BMS software, Tridium is preferred and understands wire sheet programming and logic. Basic networking, ability to manipulate pc settings to access, set up and commission devices on a network. Ability to visit job construction hard hat areas and climb stairs, climb ladders, maneuver in and around pipework and air ducts and work safely near exposed line voltage and low voltage wiring and terminations. Possess valid state motor vehicle license and possess safe driving record as required by company's insurance carrier. Able to pass State and Federal security screening. Out-of-state travel will be required (estimated to be between 25% - 30% throughout the year) Understanding of Mechanical and Electrical equipment in a typical Data Center application *The above pay range is Total Cash; a combination of base salary (dependent upon experience/Tech level) and additional bonus potential through internal programs (annual bonus, living expenses, profit sharing) This role is open to and may offer additional compensation in the form of relocation assistance to candidates willing to relocate permanently Note: Employees are held accountable for all duties of this job. This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position. What else can we offer you?We offer a fantastic lineup of benefits, including Medical, Dental, Vision, FSA, HSA, 401k Matching, Paid Vacation, Paid Sick, Paid Holidays, Paid Parental Leave, Paid Short Term & Long Term Disability, Tuition Reimbursement, and a flexible hybrid work schedule (for office-based employees). Working at Mantis also brings tremendous professional development opportunities that allow you to make a real impact on both the company and your career! Not sure you meet every single requirement?Studies show that women and individuals from underrepresented groups often hesitate to apply unless they check every box. At Mantis, we're committed to building an inclusive and equitable team-so if this role excites you, we'd love to hear from you, even if your experience doesn't match every single qualification. Mantis Innovation is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Mantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility-inside and out-and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. As a Controls Tech II and/or III on our team, you will be responsible for installing and servicing Building Automation Systems, including project start-up, commissioning, routine and emergency service, and preventive maintenance. This role will require 100% permanent relocation to one of the following locations ASAP: Ashburn, VA Atlanta, GA Lubbock, TX Starting around March 2026 we will need people in: Oregon (city TBD) Washington (city TBD) California (city TBD) If you are not open to relocating to one of the areas above, please still apply as we might have other positions that open later with more flexible location options. Responsibilities * Service of existing building control systems. * Startupof complete building control systems. * Install building control components(controllers, panels, conduit, sensors, etc.) * Low voltage control panel building. * Work closely with our installation subcontractors and coordinate work with them to ensure projects are completed on time as per code, standards and contract requirements. * Perform a point-to-point checkout per standard procedures. * Perform software/hardware calibration required for proper equipment and system operation. * Perform low voltage cable installation/termination for small projects if needed. * Take on project commissioning activities to include daily meetings and documenting results. Qualifications * Ability to own a task from beginning to end. Effectively communicating progress and/or issues about assigned task. * Can work both independently and as a part of a team. * Must be able to multi-task, it is very probable you will be assigned multiple tasks over multiple customers at any given time. * Basic proficiency in Microsoft suite (Word, Outlook, Visio, Excel, PowerPoint) * Can read schematics (network topologies, electrical one-lines, device wiring drawings, control drawings, etc...) * Familiarity with CAD, construction drawings * Strong understanding of open protocols (For Example... BACnet IP/BACnet MSTP/Modbus TCP/Modbus RTU) * Knowledge of terminating wire to terminal blocks to include RS-232, RS-485 and CAT 5/6 * Troubleshooting skills, the ability to understand a problem and work toward reasonable solutions * Maintain proper understandings of code requirements for indoor and outdoor electrical infrastructure, and knowledge of handling higher voltage (120, 240, 480V) for controls purposes * Has had experience with BMS software, Tridium is preferred and understands wire sheet programming and logic. * Basic networking, ability to manipulate pc settings to access, set up and commission devices on a network. * Ability to visit job construction hard hat areas and climb stairs, climb ladders, maneuver in and around pipework and air ducts and work safely near exposed line voltage and low voltage wiring and terminations. * Possess valid state motor vehicle license and possess safe driving record as required by company's insurance carrier. * Able to pass State and Federal security screening. * Out-of-state travel will be required (estimated to be between 25% - 30% throughout the year) * Understanding of Mechanical and Electrical equipment in a typical Data Center application $140,000 - $180,000 a year * The above pay range is Total Cash; a combination of base salary (dependent upon experience/Tech level) and additional bonus potential through internal programs (annual bonus, living expenses, profit sharing) This role is open to and may offer additional compensation in the form of relocation assistance to candidates willing to relocate permanently Note: Employees are held accountable for all duties of this job. This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position. What else can we offer you? We offer a fantastic lineup of benefits, including Medical, Dental, Vision, FSA, HSA, 401k Matching, Paid Vacation, Paid Sick, Paid Holidays, Paid Parental Leave, Paid Short Term & Long Term Disability, Tuition Reimbursement, and a flexible hybrid work schedule (for office-based employees). Working at Mantis also brings tremendous professional development opportunities that allow you to make a real impact on both the company and your career! Not sure you meet every single requirement? Studies show that women and individuals from underrepresented groups often hesitate to apply unless they check every box. At Mantis, we're committed to building an inclusive and equitable team-so if this role excites you, we'd love to hear from you, even if your experience doesn't match every single qualification. Mantis Innovation is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Mantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility-inside and out-and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. As a Controls Tech II and/or III on our team, you will be responsible for installing and servicing Building Automation Systems, including project start-up, commissioning, routine and emergency service, and preventive maintenance. This role will require 100% permanent relocation to one of the following locations ASAP:Ashburn, VAAtlanta, GALubbock, TX Starting around March 2026 we will need people in: Oregon (city TBD) Washington (city TBD) California (city TBD) If you are not open to relocating to one of the areas above, please still apply as we might have other positions that open later with more flexible location options. Responsibilities Service of existing building control systems. Startupof complete building control systems. Install building control components(controllers, panels, conduit, sensors, etc.) Low voltage control panel building. Work closely with our installation subcontractors and coordinate work with them to ensure projects are completed on time as per code, standards and contract requirements. Perform a point-to-point checkout per standard procedures. Perform software/hardware calibration required for proper equipment and system operation. Perform low voltage cable installation/termination for small projects if needed. Take on project commissioning activities to include daily meetings and documenting results. Qualifications Ability to own a task from beginning to end. Effectively communicating progress and/or issues about assigned task. Can work both independently and as a part of a team. Must be able to multi-task, it is very probable you will be assigned multiple tasks over multiple customers at any given time. Basic proficiency in Microsoft suite (Word, Outlook, Visio, Excel, PowerPoint) Can read schematics (network topologies, electrical one-lines, device wiring drawings, control drawings, etc...) Familiarity with CAD, construction drawings Strong understanding of open protocols (For Example... BACnet IP/BACnet MSTP/Modbus TCP/Modbus RTU) Knowledge of terminating wire to terminal blocks to include RS-232, RS-485 and CAT 5/6 Troubleshooting skills, the ability to understand a problem and work toward reasonable solutions Maintain proper understandings of code requirements for indoor and outdoor electrical infrastructure, and knowledge of handling higher voltage (120, 240, 480V) for controls purposes Has had experience with BMS software, Tridium is preferred and understands wire sheet programming and logic. Basic networking, ability to manipulate pc settings to access, set up and commission devices on a network. Ability to visit job construction hard hat areas and climb stairs, climb ladders, maneuver in and around pipework and air ducts and work safely near exposed line voltage and low voltage wiring and terminations. Possess valid state motor vehicle license and possess safe driving record as required by company's insurance carrier. Able to pass State and Federal security screening. Out-of-state travel will be required (estimated to be between 25% - 30% throughout the year) Understanding of Mechanical and Electrical equipment in a typical Data Center application This role is open to and may offer additional compensation in the form of relocation assistance to candidates willing to relocate permanently Note: Employees are held accountable for all duties of this job. This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position. What else can we offer you?We offer a fantastic lineup of benefits, including Medical, Dental, Vision, FSA, HSA, 401k Matching, Paid Vacation, Paid Sick, Paid Holidays, Paid Parental Leave, Paid Short Term & Long Term Disability, Tuition Reimbursement, and a flexible hybrid work schedule (for office-based employees). Working at Mantis also brings tremendous professional development opportunities that allow you to make a real impact on both the company and your career! Not sure you meet every single requirement?Studies show that women and individuals from underrepresented groups often hesitate to apply unless they check every box. At Mantis, we're committed to building an inclusive and equitable team-so if this role excites you, we'd love to hear from you, even if your experience doesn't match every single qualification. Mantis Innovation is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Responsibilities Support the installation, maintenance, and troubleshooting of automated production equipment Assist in PLC and HMI program modifications under engineering supervision Perform routine inspections and preventive maintenance on automation systems Monitor production line performance and help identify improvement opportunities Ensure proper functioning of sensors, actuators, and other control components Read and follow technical documentation and wiring diagrams Cooperate with maintenance, production, and engineering teams to minimize downtime Requirements Technical qualification in mechatronics, electrical, or automation field Basic knowledge of PLC systems (Siemens, Allen-Bradley, or similar) Ability to read electrical and mechanical drawings Hands-on experience with maintenance or troubleshooting of production machinery Accuracy, problem-solving mindset, and willingness to learn Shift work flexibility if required Advantage: experience in an industrial or manufacturing environment Foxconn is an Equal Opportunity Employer and Drug Free Workplace. Qualified applicants will receive consideration for employment without regard to their race, color, religion, national origin, sex, sexual orientation, gender identity, protected veteran status or disability.

Job DescriptionOverview Are you a highly skilled Electromechanical Technician with a passion for precision, problem-solving, and cutting-edge technology? We are seeking a dedicated individual to join our dynamic engineering team in Northridge, CA. This is an exceptional opportunity to apply your expertise in both mechanical and electrical systems, contributing directly to the performance and reliability of advanced machinery. Our company fosters an innovative, collaborative, and supportive environment where your contributions are recognized and your professional growth is a priority. We believe in empowering our team members with challenging projects, continuous learning opportunities, and a clear path for career advancement. You'll work alongside experienced engineers and technicians, tackling complex electromechanical challenges and becoming an integral part of our success in a high-demand industry. If you are driven by technical excellence and eager to make a tangible impact, this role offers the perfect platform to elevate your career. We pride ourselves on a culture that encourages ingenuity and critical thinking. Our Northridge facility is equipped with state-of-the-art tools and technology, providing an ideal setting for technicians who thrive on hands-on work and continuous improvement. This role isn't just about maintaining equipment; it's about optimizing performance, implementing innovative solutions, and contributing to the next generation of our products. You will have the chance to develop specialized skills in areas like robotics and automation, which are increasingly vital in today's engineering landscape. We are committed to investing in our employees' professional development, offering tuition reimbursement and access to industry-leading certifications to help you reach your full potential. Joining our team means becoming part of a forward-thinking organization that values its people. We understand that a fulfilling career involves both challenging work and a supportive community. Here, you'll find both, along with opportunities to expand your skill set, take on greater responsibilities, and advance within the company. This role is ideal for a proactive and detail-oriented technician who is ready to take their career to the next level in a thriving engineering environment. Duties & Responsibilities Perform complex electromechanical troubleshooting, diagnosing and resolving issues in integrated systems. Execute preventive maintenance programs for production machinery and test equipment to ensure optimal performance and longevity. Conduct precise mechanical assembly and integration of components, ensuring adherence to engineering specifications. Perform thorough electrical testing, including continuity, voltage, and current measurements, to verify system functionality. Interpret and utilize detailed blueprints, schematics, and technical drawings for assembly, repair, and modification tasks. Implement and maintain PLC programming for automated systems, including minor modifications and debugging. Provide essential robotics maintenance, covering calibration, repair, and programming adjustments for robotic arms and automated cells. Calibrate and adjust various types of equipment and instrumentation to meet stringent operational standards. Troubleshoot and repair hydraulic systems and pneumatic systems, ensuring reliable operation and safety. Document all maintenance activities, repairs, and calibrations accurately in maintenance logs and digital systems. Collaborate effectively with engineering teams on new equipment installation, system upgrades, and process improvement initiatives. Mentor junior technicians and contribute to a culture of shared knowledge and continuous learning. Salary & Benefits This full-time position offers a competitive annual salary ranging from $60,000 to $95,000, commensurate with your experience and qualifications. We believe in rewarding our team members generously for their expertise and dedication. Our comprehensive benefits package is designed to support your well-being and financial future, including: Robust health, dental, and vision insurance plans with low out-of-pocket costs. Generous overtime pay for hours worked beyond the standard workweek. 401(k) retirement plan with a competitive company matching contribution to help you build your savings. Paid time off (PTO) for vacation, sick leave, and personal days, ensuring a healthy work-life balance. Tuition reimbursement program to support your continuous education and skill development. Company-sponsored professional development courses and workshops. Life insurance, short-term, and long-term disability coverage. Employee assistance program (EAP) for personal and professional support. Opportunities for internal promotions and career advancement within a growing organization. A supportive and collaborative work environment focused on team success. Qualifications & Requirements High school diploma or equivalent. Minimum of 2 years of hands-on experience in electromechanical systems maintenance and repair. Demonstrated proficiency in electromechanical troubleshooting techniques. Strong foundational knowledge of electrical and mechanical principles. Ability to accurately read and interpret complex schematics, blueprints, and wiring diagrams. Experience with preventive maintenance protocols and best practices. Proficiency in using various hand tools, power tools, and diagnostic equipment. Solid understanding of safety protocols and procedures in an industrial setting, including Lockout/Tagout (LOTO). Preferred Qualifications Associate degree in Mechatronics, Electromechanical Technology, Industrial Automation, or a closely related field. Experience with PLC programming logic and basic ladder diagram interpretation. Familiarity with robotics maintenance and operation. Previous experience with equipment calibration in a manufacturing or engineering environment. OSHA Safety Certification. Skills Technical Skills Electromechanical troubleshooting PLC programming (basic) Robotics maintenance Equipment calibration Mechanical assembly Electrical testing and diagnostics Blueprint and schematic reading Preventive maintenance execution Hydraulic systems diagnostics and repair Pneumatic systems diagnostics and repair Soft Skills Problem-solving and analytical thinking Attention to detail and accuracy Effective communication (verbal and written) Team collaboration and interpersonal skills Adaptability and willingness to learn new technologies Strong work ethic and reliability Certifications Required Certifications: No specific certifications are strictly required for initial consideration, but demonstrated practical experience and knowledge are paramount. Preferred/Beneficial Certifications: * ISA Certified Control Systems Technician (CCST) - Demonstrates expertise in instrumentation, control systems, and troubleshooting. * ASQ Certified Calibration Technician - Validates skills in calibration principles and practices. * NIMS Mechatronics Certification - Confirms proficiency in integrated mechanical, electrical, and computer technologies. * OSHA Safety Certification - Highlights commitment to workplace safety and regulatory compliance. How Certifications Impact Candidacy: Possessing these certifications can significantly strengthen your application, showcasing your specialized knowledge, commitment to the field, and ability to meet industry standards. They indicate a proactive approach to professional development and a deeper understanding of complex systems, which can lead to accelerated career growth and increased responsibilities within our team. Ideal Candidate The ideal candidate for this Electromechanical Technician role is a highly motivated and detail-oriented individual with a strong mechanical aptitude and a solid understanding of electrical systems. They thrive in a fast-paced, hands-on environment and are eager to tackle complex technical challenges with a solution-oriented mindset. This person is a natural problem-solver, capable of working independently to diagnose issues and collaboratively with a team to implement effective repairs and improvements. They are committed to continuous learning, always seeking to expand their knowledge of new technologies and best practices in automation and robotics. A proactive approach to preventive maintenance, a dedication to safety, and excellent communication skills are essential. The perfect fit will align with our culture of innovation, precision, and teamwork, aspiring to grow their career in a leading-edge engineering organization. About the Role This full-time Electromechanical Technician position is based at our state-of-the-art facility in Northridge, CA. This is an on-site role, emphasizing hands-on work with our advanced machinery and integrated systems. You will be an integral part of our engineering and operations team, reporting directly to the Maintenance Manager. The team structure encourages collaboration, with opportunities to work alongside various engineering disciplines. We provide all necessary tools, diagnostic equipment, and safety gear to ensure you can perform your duties efficiently and safely. There are no regular travel requirements for this position. The growth trajectory for this role includes opportunities to specialize in areas like automation, robotics, or control systems, with potential for advancement into lead technician or supervisory roles based on performance and demonstrated leadership. How to Apply To apply for this exciting opportunity, please submit your application and resume through our online portal. Please include your resume and a cover letter detailing your relevant experience, technical skills, and why you are interested in this position. Applications will be reviewed on a rolling basis until the position is filled. We are an equal opportunity employer and value diversity at our organization. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other characteristic protected by applicable law. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. If you require an accommodation during the application process, please contact the hiring team. We actively encourage applications from individuals of all backgrounds, experiences, abilities, and perspectives. Veterans, individuals with disabilities, and members of underrepresented groups are strongly encouraged to apply.

Job DescriptionOverview Are you a hands-on problem-solver with a passion for precision mechanics and cutting-edge electronics? We are seeking a talented Electromechanical Technician to join our dynamic team in Northridge, CA. This isn't just a job; it's an opportunity to be at the forefront of innovation, working on complex systems that integrate mechanical, electrical, and software components. If you thrive in an environment where your technical expertise directly contributes to groundbreaking solutions and you're eager to continuously learn and grow, this role offers an exciting career path with significant impact. Our company fosters a collaborative and supportive culture where curiosity is encouraged, and professional development is a priority. We believe in empowering our team members with the tools and knowledge they need to excel, providing ample opportunities for skill enhancement and career advancement. You'll work alongside experienced engineers and technicians, contributing to projects that challenge your abilities and expand your understanding of sophisticated electromechanical systems. This role is ideal for a dedicated individual looking to deepen their technical skills and take on increasing levels of responsibility within a forward-thinking organization. Join us and become a vital part of a team that values ingenuity, quality, and a commitment to excellence. We're looking for someone who is not only proficient in their craft but also eager to share knowledge, embrace new challenges, and contribute to a positive and productive work environment. If you're ready to make a tangible difference and grow your career in a supportive and innovative setting, we invite you to explore this exciting opportunity. Duties & Responsibilities As an Electromechanical Technician, your responsibilities will include a diverse range of tasks focused on the assembly, testing, maintenance, and troubleshooting of advanced electromechanical systems. Your contributions will be critical to ensuring the reliability and performance of our products. Perform precise assembly and integration of mechanical and electrical components according to schematics, blueprints, and engineering specifications. Conduct diagnostic tests and troubleshooting of complex electromechanical systems to identify root causes of malfunctions and implement effective solutions. Calibrate and adjust sensors, actuators, and control systems to meet performance requirements. Execute preventive maintenance procedures on equipment to ensure optimal functionality and extend lifespan. Document all testing, maintenance, and repair activities accurately and thoroughly, maintaining detailed records. Collaborate closely with engineering teams to provide feedback on design improvements and assist in the development of new products. Assist in the setup and validation of new equipment and processes. Participate in cross-functional teams to resolve technical challenges and improve operational efficiency. Adhere to all safety protocols and quality standards in a fast-paced manufacturing or R&D environment. Mentor junior technicians and share technical knowledge to foster team growth and development. Salary & Benefits We offer a competitive compensation package designed to attract and retain top talent. The salary range for this position is $60,000 to $80,000 annually, depending on experience and qualifications. In addition to base compensation, we provide a comprehensive benefits package that includes: Health and Wellness:Medical, dental, and vision insurance plans with various coverage options. Financial Security:401(k) retirement plan with company matching contributions to help you plan for your future. Paid Time Off:Generous paid time off (PTO) policy, including vacation, sick leave, and company-paid holidays. Professional Development:Opportunities for continuous learning through internal training programs, workshops, and tuition reimbursement for approved courses and certifications. Work-Life Balance:Potential for flexible work arrangements and a supportive environment that values personal well-being. Additional Perks:Employee assistance programs, wellness initiatives, and opportunities to participate in company-sponsored events. Qualifications & Requirements To be successful in this role, candidates should possess a strong foundation in electromechanical principles and practical experience. Minimum of 3 years of hands-on experience as an Electromechanical Technician or in a similar role. Associate's degree or technical certification in Electromechanical Technology, Electronics, Mechatronics, or a related field. Proficiency in reading and interpreting electrical schematics, mechanical drawings, and assembly instructions. Demonstrated ability to use a variety of hand tools, power tools, and precision measurement equipment (e.g., multimeters, oscilloscopes, calipers). Strong understanding of electrical circuits, control systems, motors, sensors, and mechanical assemblies. Experience with soldering and wiring techniques. Basic computer skills, including familiarity with diagnostic software and Microsoft Office Suite. Ability to perform the essential functions of this position, with or without reasonable accommodation. Ideal Candidate The ideal candidate for the Electromechanical Technician role is a highly motivated and detail-oriented individual who thrives in a dynamic technical environment. They possess a natural curiosity for how things work and a persistent drive to solve complex problems. A proactive and independent problem-solver who can diagnose issues efficiently and implement effective solutions. Possesses excellent communication skills, capable of clearly explaining technical issues and collaborating effectively with team members and engineers. Demonstrates a strong commitment to quality, accuracy, and safety in all aspects of their work. Adaptable and eager to learn new technologies and processes as they evolve. Exhibits a positive attitude, strong work ethic, and ability to work effectively both independently and as part of a team. Someone who takes pride in their craftsmanship and contributes to a culture of continuous improvement. Comfortable working in a fast-paced setting and managing multiple tasks with competing priorities. Other Relevant Information This position is based full-time in our Northridge, CA facility. The role primarily involves hands-on work in a lab or production environment. Work Location:This is an onsite position located at our facility in Northridge, CA. Travel Requirements:Minimal to no travel is anticipated for this role. Equipment Provided:All necessary tools, safety equipment, and diagnostic instruments will be provided by the company. How to Apply To apply for this exciting opportunity, please submit your resume and a cover letter through our careers portal. We look forward to reviewing your application and learning more about your qualifications and interest in joining our team.

Job Description: Electromechanical Technician IThe Electromechanical Technician I is responsible for performing entry-level technical tasks involving the installation, maintenance, troubleshooting, and repair of electromechanical systems and equipment. This role supports the efficient operation of machinery by ensuring all components function correctly and meet quality standards.Key Responsibilities:Assemble, install, and maintain electromechanical equipment and systems under supervision.Perform routine inspections to identify potential issues in machinery and systems.Troubleshoot and repair basic mechanical, electrical, and electronic issues.Assist in testing system performance using diagnostic tools and equipment.Read and interpret technical diagrams, schematics, and manuals.Ensure compliance with safety standards and protocols during maintenance and repair tasks.Maintain accurate records of work performed, including repairs, parts used, and maintenance schedules.Communicate effectively with team members and supervisors to ensure efficient operations.Qualifications:High school diploma or equivalent; additional technical certification or vocational training is a plus .Basic understanding of mechanical, electrical, and electronic systems. Ability to use hand tools, power tools, and diagnostic equipment safely and effectively. Strong problem-solving skills and attention to detail. Willingness to learn and adapt to new systems and technologies. Ability to follow instructions and work collaboratively within a team. Physical Requirements: Ability to lift up to 50 pounds and perform physical tasks such as bending, standing, and climbing. Comfortable working in environments with noise, heat, or moving machinery. Preferred Qualifications: Previous experience in a technical or maintenance role is advantageous but not required. Familiarity with industrial machinery or automated machinery

Full-time Description - Verus Verus is a boutique engineering and technical services firm specializing in industrial automation, controls, SCADA systems, business process engineering and consulting for a wide array of industries. We have expertise in all aspects of systems integration including electrical design, instrumentation, control panel design/build, programming, and commissioning. Since the company's founding in 2015, Verus has grown to a team of 40 engineers with 4 locations in California, Nevada, Idaho and Oregon. We are growing and looking for the right candidate to join our team. Industries Served: Power Generation Mining Food and Beverage Oil and Gas Municipal Waste/Wastewater Manufacturing Maritime Hiring Location: Concord, CA Requirements 3+ Years experience in Automation & Controls Engineering Bachelor's degree in engineering from an accredited school OR equivalent experience. Licensed as a professional engineer.PLC and DCS Programming from modification to executing from scratch. HMI/SCADA programming from stand-alone to redundant distributed Implement Historians and reporting Server and computer setup/configuration Develop control narratives Develop testing plans Specify and configure instruments Commissioning of systems (some remote travel required) Preparing specifications for purchasing of software and servers. Estimating software, labor, and implementation costs for budget preparation. Platforms Wonderware Sys Platform Wonderware Intouch Wonderware Historian Rockwell Logix/Studio5000 Rockwell FT ViewSE Studio Rockwell Historian Schneider Control Expert Schneider Citect OSI Pi IA Ignition Networking Alarm Rationalization VMWare vSphere Cybersecurity Safety - Process or Discrete Siemens TIA Portal Siemens WinCC OA Batching Delta V ABB 800xA, Infi90 Honeywell Experion LX

Job DescriptionDescription: - Verus Verus is a boutique engineering and technical services firm specializing in industrial automation, controls, SCADA systems, business process engineering and consulting for a wide array of industries. We have expertise in all aspects of systems integration including electrical design, instrumentation, control panel design/build, programming, and commissioning. Since the company's founding in 2015, Verus has grown to a team of 40 engineers with 4 locations in California, Nevada, Idaho and Oregon. We are growing and looking for the right candidate to join our team. Industries Served: Power Generation Mining Food and Beverage Oil and Gas Municipal Waste/Wastewater Manufacturing Maritime Hiring Location: Concord, CA Requirements: 3+ Years experience in Automation & Controls Engineering Bachelor's degree in engineering from an accredited school OR equivalent experience. Licensed as a professional engineer.PLC and DCS Programming from modification to executing from scratch. HMI/SCADA programming from stand-alone to redundant distributed Implement Historians and reporting Server and computer setup/configuration Develop control narratives Develop testing plans Specify and configure instruments Commissioning of systems (some remote travel required) Preparing specifications for purchasing of software and servers. Estimating software, labor, and implementation costs for budget preparation. Platforms Wonderware Sys Platform Wonderware Intouch Wonderware Historian Rockwell Logix/Studio5000 Rockwell FT ViewSE Studio Rockwell Historian Schneider Control Expert Schneider Citect OSI Pi IA Ignition Networking Alarm Rationalization VMWare vSphere Cybersecurity Safety - Process or Discrete Siemens TIA Portal Siemens WinCC OA Batching Delta V ABB 800xA, Infi90 Honeywell Experion LX

Full-time Description Automation /Controls Engineer, San Diego, CA Verus is looking for a self-motivated, organized, and results-driven Controls Engineer to join our collaborative team. Someone who is passionate about solving complex problems alongside our clients. Our clients are important to us, and we are seeking someone who enjoys a good challenge, is accountable, well-organized, and takes pride in meeting deadlines and milestones. The ideal candidate for this position has experience developing and programming various control systems. The candidate must be able to implement control strategies, design control panels, specify instrumentation, and program common PLC/HMI packages. The candidate must be comfortable working in both office and field environments. The position requires some travel domestically. Most importantly, we are looking for someone who will fit in with our existing team - someone who is authentic, personable, trustworthy, and who has a good sense of humor, approachable, and humble. RESPONSIBILITIES: The responsibilities of the Controls Engineer include, but are not limited to, the following: · Develop SCADA, HMI, and PLC programs based on control strategies and specifications · Design control panels and specify components · Develop system specifications and sequence of operations based on client requirements · Perform system commissioning and field support functions · Work with discipline leads, PMs, and other team members to manage and run programming efforts for the project. · Prioritize and set deadlines, while also being adaptable and flexible to changing needs. · Commission control system programming · Conduct effective design review meetings and interface regularly with clients regarding the scope of work, deliverable requirements, and project status. · Able to promote and market programming scope to new and existing clients. · Mentor junior controls engineers. · Able to generate and maintain full project life cycle documentation. WHAT SETS VERUS APART? Verus is a Latin word that means true, authentic, fair, and sincere. It's a word that we feel describes who we are as a firm. We pride ourselves on our client-focused approach, our innovation, and our desire to provide effective solutions to deliver our clients' business and operational objectives. We've assembled a group of industry leaders who bring unparalleled technical experience and knowledge to each of our projects. We're an employee-owned company, and this is reflected in how we work together as a team, and how we take ownership in the work we do for our clients. A few reasons to consider us: Verus employees care for and respect one another Our people and culture are genuine We invest in our employees with competitive pay and benefits We have a work hard, play hard culture and respect work/life balance There are opportunities for growth. Learn more about us at **************** Requirements · Bachelor's degree in engineering or computer science from an accredited university or equivalent experience · 15+ years' applicable experience · Experience successfully leveraging technology · Track record of success with documented results · PLC Programming (Allen-Bradley, Siemens, Modicon, GE) · HMI Programming (Ignition, Wonderware, Cimplicity, FTViewSE) · Knowledge of computer configuration and networking · Demonstrated ability to work effectively as part of a multi-disciplinary team · Self-motivated, energetic individual with a can-do attitude · Strong problem-solving and organizational skills · Excellent written and verbal communication skills

Job DescriptionDescription: Automation /Controls Engineer, San Diego, CA Verus is looking for a self-motivated, organized, and results-driven Controls Engineer to join our collaborative team. Someone who is passionate about solving complex problems alongside our clients. Our clients are important to us, and we are seeking someone who enjoys a good challenge, is accountable, well-organized, and takes pride in meeting deadlines and milestones. The ideal candidate for this position has experience developing and programming various control systems. The candidate must be able to implement control strategies, design control panels, specify instrumentation, and program common PLC/HMI packages. The candidate must be comfortable working in both office and field environments. The position requires some travel domestically. Most importantly, we are looking for someone who will fit in with our existing team - someone who is authentic, personable, trustworthy, and who has a good sense of humor, approachable, and humble. RESPONSIBILITIES: The responsibilities of the Controls Engineer include, but are not limited to, the following: · Develop SCADA, HMI, and PLC programs based on control strategies and specifications · Design control panels and specify components · Develop system specifications and sequence of operations based on client requirements · Perform system commissioning and field support functions · Work with discipline leads, PMs, and other team members to manage and run programming efforts for the project. · Prioritize and set deadlines, while also being adaptable and flexible to changing needs. · Commission control system programming · Conduct effective design review meetings and interface regularly with clients regarding the scope of work, deliverable requirements, and project status. · Able to promote and market programming scope to new and existing clients. · Mentor junior controls engineers. · Able to generate and maintain full project life cycle documentation. WHAT SETS VERUS APART? Verus is a Latin word that means true, authentic, fair, and sincere. It's a word that we feel describes who we are as a firm. We pride ourselves on our client-focused approach, our innovation, and our desire to provide effective solutions to deliver our clients' business and operational objectives. We've assembled a group of industry leaders who bring unparalleled technical experience and knowledge to each of our projects. We're an employee-owned company, and this is reflected in how we work together as a team, and how we take ownership in the work we do for our clients. A few reasons to consider us: Verus employees care for and respect one another Our people and culture are genuine We invest in our employees with competitive pay and benefits We have a work hard, play hard culture and respect work/life balance There are opportunities for growth. Learn more about us at **************** Requirements: · Bachelor's degree in engineering or computer science from an accredited university or equivalent experience · 15+ years' applicable experience · Experience successfully leveraging technology · Track record of success with documented results · PLC Programming (Allen-Bradley, Siemens, Modicon, GE) · HMI Programming (Ignition, Wonderware, Cimplicity, FTViewSE) · Knowledge of computer configuration and networking · Demonstrated ability to work effectively as part of a multi-disciplinary team · Self-motivated, energetic individual with a can-do attitude · Strong problem-solving and organizational skills · Excellent written and verbal communication skills

RETHINK MANUFACTURING The only way to ignite change is to build the best team. At Bright Machines, we're innovators and experts in our craft who have joined together to create a new category of manufacturing that will help transform the industry. We believe software and data are the answer, thoughtfully applied to solve our customers' unique challenges. Through intelligent automation, we give factories newfound flexibility, scalability, and resilience. We deliver products to meet the demands of today while building a platform to take advantage of what comes next. Working with us means you'll have the opportunity to make lasting, impactful changes for our company and our customers. If you're ready to apply your exceptional skills to create the factory of the future, we'd love to speak with you. ABOUT THE ROLE As an Automation Controls Engineer you will be designing and developing automated solutions, choosing parts, and programming our robotic systems. Automation Controls Engineer are able to communicate effectively with all project stakeholders including customers, leadership, our sales teams, program management, research and development engineers, and delivery team engineers that bring customer solutions to life. We have a passion for bringing together cross functional teams to creatively solve problems. We value working closely with different groups throughout project lifecycles and believe that creating and validating user requirements at the system and sub system level is essential for success. WHAT YOU WILL BE DOING * Helping to architect the process and controls that will control our machines * Reading and contributing to electrical schematics that define and document our systems * Participating in mechanical and electrical design reviews to provide feedback on the systems you will be controlling * Programming the paths for the robots and motion systems that make up our automation * Analyzing customer needs, turning those into system requirements, and incorporating them into the software of the system * Programming Beckhoff PLCs using the TwinCat3 IDE * Developing real-time code using IEC 61131-3 Structured Text * Developing non real-time code using Python and object oriented design patterns * Travel 25% to 30% WHAT WE WANT TO SEE * BS or MS in Electrical or Computer Engineering or equivalent * Beckhoff PLC programming * Structured Text (61131-3) * Python programming * Object oriented programming concepts * Git software version control * SQL RDB * Robot programming * Industrial Automation * Stepper and servo motor motion control and tuning * Familiarity with Linux and command line tools IT WOULD BE GREAT IF YOU HAD * Some exposure with web technologies (ie JavaScript, React, REST, GraphQL). * Experience using industrial robots such as Fanuc * Experience with vision systems (i.e. Keyence or Cognex) * Experience with SCADA systems WHO YOU ARE * You are customer obsessed * You believe in the power of a team, diversity of thought, and unity of action * You always act with integrity, keep your commitments, and practice transparency * You think boldly, lead with courage, and demand the highest standards * You drive for results, and act like an owner $150,000 - $185,000 a year BE EMPOWERED TO CHANGE AN INDUSTRY Bright Machines is a next-generation, AI-enabled manufacturer focused on data center infrastructure assembly operations. Bright Machines uses its proprietary AI-based robotics and software to assemble AI infrastructure hardware products (i.e., data center servers) for hyperscalers and leading Original Equipment Manufacturers (OEMs). With its new AI factory, Bright Machines addresses increasing market demands for computing power due to the surge of AI and the U.S. national mandate to reshore manufacturing by building data center infrastructure at scale with higher quality and shorter time-to-market. Bright Machines is headquartered in San Francisco, California, with an integration center in Guadalajara, Mexico. The company has been recognized as one of Forbes' AI 50, awarded "Best AI-based Solution for Manufacturing" by AI Breakthrough, named a "Technology Pioneer" by the World Economic Forum, and highlighted by several other leading technology and innovation organizations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

RETHINK MANUFACTURING The only way to ignite change is to build the best team. At Bright Machines , we're innovators and experts in our craft who have joined together to create a new category of manufacturing that will help transform the industry. We believe software and data are the answer, thoughtfully applied to solve our customers' unique challenges. Through intelligent automation, we give factories newfound flexibility, scalability, and resilience. We deliver products to meet the demands of today while building a platform to take advantage of what comes next. Working with us means you'll have the opportunity to make lasting, impactful changes for our company and our customers. If you're ready to apply your exceptional skills to create the factory of the future, we'd love to speak with you. ABOUT THE ROLE As an Automation Controls Engineer you will be designing and developing automated solutions, choosing parts, and programming our robotic systems. Automation Controls Engineer are able to communicate effectively with all project stakeholders including customers, leadership, our sales teams, program management, research and development engineers, and delivery team engineers that bring customer solutions to life. We have a passion for bringing together cross functional teams to creatively solve problems. We value working closely with different groups throughout project lifecycles and believe that creating and validating user requirements at the system and sub system level is essential for success.WHAT YOU WILL BE DOING Helping to architect the process and controls that will control our machines Reading and contributing to electrical schematics that define and document our systems Participating in mechanical and electrical design reviews to provide feedback on the systems you will be controlling Programming the paths for the robots and motion systems that make up our automation Analyzing customer needs, turning those into system requirements, and incorporating them into the software of the system Programming Beckhoff PLCs using the TwinCat3 IDE Developing real-time code using IEC 61131-3 Structured Text Developing non real-time code using Python and object oriented design patterns Travel 25% to 30% WHAT WE WANT TO SEE BS or MS in Electrical or Computer Engineering or equivalent Beckhoff PLC programming Structured Text (61131-3) Python programming Object oriented programming concepts Git software version control SQL RDB Robot programming Industrial Automation Stepper and servo motor motion control and tuning Familiarity with Linux and command line tools IT WOULD BE GREAT IF YOU HAD Some exposure with web technologies (ie JavaScript, React, REST, GraphQL). Experience using industrial robots such as Fanuc Experience with vision systems (i.e. Keyence or Cognex) Experience with SCADA systems WHO YOU ARE You are customer obsessed You believe in the power of a team, diversity of thought, and unity of action You always act with integrity, keep your commitments, and practice transparency You think boldly, lead with courage, and demand the highest standards You drive for results, and act like an owner BE EMPOWERED TO CHANGE AN INDUSTRY Bright Machines is a next-generation, AI-enabled manufacturer focused on data center infrastructure assembly operations. Bright Machines uses its proprietary AI-based robotics and software to assemble AI infrastructure hardware products (i.e., data center servers) for hyperscalers and leading Original Equipment Manufacturers (OEMs). With its new AI factory, Bright Machines addresses increasing market demands for computing power due to the surge of AI and the U.S. national mandate to reshore manufacturing by building data center infrastructure at scale with higher quality and shorter time-to-market. Bright Machines is headquartered in San Francisco, California, with an integration center in Guadalajara, Mexico. The company has been recognized as one of Forbes' AI 50, awarded “Best AI-based Solution for Manufacturing” by AI Breakthrough, named a “Technology Pioneer” by the World Economic Forum, and highlighted by several other leading technology and innovation organizations.