Plant operator jobs in Rhode Island - 18 jobs

at TerraTherm, Inc. We are seeking a Stationary Engineer to join our team. This position reports to the Operation Field Supervisor and is responsible for the safe operation of boilers and other process equipment on thermal remediation projects. This is a mid-level position in which you will operate as part of a team on a wide range of project and task assignments. Major Responsibilities: Exhibit a positive attitude and behaviors, specifically relative to the company, employees, and clients. Promote teamwork and demonstrate a willingness to support company goals. Maintain optimal operation of mechanical systems by performing routine inspections and maintenance, monitoring metering equipment, and adjusting levels as necessary. Maintain equipment, perform daily inspections, cleanings, filter replacement, and all other tasks necessary to keep all components performing optimally; identify and repair or replace malfunctioning components. Work closely with project management and engineering team. Ensure safety by monitoring safety equipment, identifying concerns or potential issues, and taking the appropriate action to address the problem. Perform necessary repairs and replacements, obtain replacement parts and upgrade components as needed while considering cost & system efficiency. Work closely with site manager and or lead operator with monitoring tasks, scheduling tasks, providing appropriate instruction to less experienced colleagues, and giving constructive feedback on performance of system and team. Maintain licenses and continue to be updated on current knowledge of all applicable safety laws and regulations to always ensure full compliance. Maintain and keep current Equipment Service Reports and enter properly documented records of inspections, maintenance routines and repairs to equipment and any changes to the system. Sustain up-to-date knowledge of developments in relevant technology and make recommendations for maximizing systems. Periodically perform physical exertions including light-medium weight, lifting, pushing, pulling, stair or ladder climbing, and other construction/maintenance activities for 8-to-12-hour shifts. Skills/Aptitudes: Self-starter and ability to work under minimum supervision. Experience with complex systems or industrial applications. Good communication and reporting skills. Good recordkeeping and organizational skills. Ability to manage multiple priorities and stay focused and on task in chaotic environments. Qualifications/Certifications: Shall have graduated from a high school or have a GED diploma; and Shall have been employed as a licensed boiler operator for five (5) years or have been an assistant to a licensed stationary engineer for at least three (3) years preceding the date of application, or shall have graduated as a mechanical engineer from an accredited engineering school; and Shall have received a passing grade in a written, oral or practical examination administered by the chief examiner, as defined in section 14-90 Holders of a stationary engineer license shall be eligible to operate the following equipment: Any stationary engine or prime mover of cumulative horsepower Any refrigeration machinery Steam or hot water boilers Diesel generator Air conditioning machinery Hydraulics system Gas generator Steam turbine A boiler operator or stationary engineer shall oversee all boilers, stationary engines, prime movers, diesel engines, gas engines, and steam turbines from 30 H.P. to 100 H.P. A stationary engineer or a refrigeration machine operator shall oversee all refrigeration equipment and air conditioning equipment over one hundred (100) tons using Group 1 refrigerants; or refrigeration equipment of fifteen (15) tons or more using Group 2 and Group 3 refrigerants as defined in section 14-88©. A stationary engineer shall oversee all boilers, stationary engines, prime movers, diesel engines, gas engines, and steam turbines over 100 HP. Interested candidates are encouraged to apply. We look forward to hearing from you! Please note that these are general guidelines and specific requirements may vary. It's recommended to contact the local authorities or a professional in the field for the most accurate information. Also, remember to always prioritize safety when operating such equipment. TerraTherm partners with leading engineering firms, government agencies, corporations, and property owners in flexible, cooperative relationships to achieve cleanup goals. Our experienced project teams and patented technologies are based on over 20 years of successful experience and R&D in the thermal remediation of soil, rock, and groundwater. The various technologies we incorporate to remove hazardous chemicals from the soil is second to none. We invite and encourage those who want to make a difference, and who wish to be a part of implementing remedies to address our world's environmental issues, to apply. TerraTherm Inc. a subsidiary of Cascade offers: Comprehensive training and flexible career paths Encouragement to pursue new roles nationwide, explore a variety of projects, and work with mentors and experts who help shape the industry Comprehensive Medical/Prescription Drug/Dental/Vision 401(k) Retirement Savings Plan with Company Match Company paid Basic Life Insurance / Short and Long-Term Disability Health Reimbursement Account and Flexible Spending Account Sick Leave / Holiday / Vacation Pay License Bonuses / Tuition Reimbursement Who is Cascade? From our roots as a Northwest regional drilling company, we have grown into a national, full-service environmental services company offering innovative solutions to our customers. We believe in excellence at every level and that includes hiring employees who are the best at what they do. We firmly believe our employees are the most critical component of our long-term success. At Cascade, we provide a career, not just a job. Cascade's core purpose is to be the essential business partner that contributes to our clients' success and advancement in tackling even the most challenging environmental and geotechnical problems, to contribute to our industry and the betterment of our employee's careers and the communities we serve. What does Cascade offer? Comprehensive training and flexible career paths Encouragement to pursue new roles nationwide, explore a variety of projects, and work with mentors and experts who help shape the industry Comprehensive Medical/Prescription Drug/Dental/Vision 401(k) Retirement Savings Plan with Company Match Company-paid Basic Life Insurance / Short- and Long-Term Disability Health Reimbursement Account and Flexible Spending Account Sick Leave / Holiday / Vacation Pay License Bonuses / Tuition Reimbursement Charitable Donation Match We are proud to provide a full range of benefits programs that help our employees and their families plan for today and their future. The benefits we offer are competitive and allow flexibility and choice to meet the individual needs of our employees and their families. Who are you? Hard-working, talented, and career-minded Challenge-seeking Strong desire to contribute to a stable, diverse organization Work hard, play hard mindset Open to continued learning and development Collaborative, team player Customer service minded To learn more about our exciting career opportunities at Cascade, check out our Careers site at****************************

See description in PDF: ************ warwickri. gov/sites/g/files/vyhlif12206/f/pages/field_maint_operator_26-016-1. pdf

Job Title Control Room Operator III Reports To O&M Manager, Operations ) As a CRO III (Control Room Operator Level III) at Manchester Street Station, you will play a crucial role in ensuring the safe and efficient operation of our facility. Your primary responsibility will be to operate and monitor all major components of this Combined Cycle power plant, while adhering to established protocols (including safety and compliance), as well as operational procedures. This position is in a bargaining unit represented by the Utility Workers of America/AFL-CIO and Local 310 BUW Council UWUA, AFL-CIO. Job Functions Duties to include, but are not limited to: Monitors and operates all major and auxiliary equipment and systems associated with a combined cycle steam powered electric generating station. Performs start-ups, shutdowns and emergency procedures as necessary for safe equipment operations Follow standard operating procedures (SOPs) and always adhere to safety guidelines to ensure a safe working environment. Complies with all safety, NERC, and environmental regulations. Observes, records and interprets indications from instrumentation and control systems during operational rounds Performs functional testing of plant systems and components. Interprets acceptability of data in comparison with established standards or sound power plant practices. Determines the need for and performs routine operational tests and adjustments on all power plant systems and components as required. Assists in the investigation of plant problems, incidents, accidents and unusual events, and provides analyses, recommendations, reports and appropriate follow-up plans. Performs switching and tagging and housekeeping duties as required. Maintains logs, records, and data sheets; prepares reports, trends and time sheets, material requisitions, work orders, and other administrative documents related to the business of power and steam production. Provides advice and counsel to the Operations Manager and Lead Operators regarding technical and administrative conduct and shift operations. Communicates with and represents the Company in its relations and communications with contractors and other non-Company personnel. Qualifies to perform station lockout/tagout procedures Supports Chemistry functions, as needed as agreed upon with the union. Conduct lockout tagout procedures to isolate equipment and energy sources during maintenance activities, ensuring the safety of maintenance personnel. Performs all other duties as assigned (included, but not limited to, pre-job briefs, shift turnover, issuing permits, etc.) The hourly rate for this position is $49.36. This position requires the ability to work 12 consecutive hours of work on a rotating shift. Education and Experience - An equivalent combination of education, training and experience will be considered. High School Diploma or equivalent A City of Providence Boiler Operator License upon award of the position and a City of Providence Stationary Engineer's License within one year. Minimum of three years of operations experience. Valid driver's license. Knowledge, Skills and Abilities which may be representative, but not all-inclusive of those commonly associated with this position. Must successfully complete all required Control Room Operator training. Ability in the following areas; basic math, electricity, chemistry and power plant physical sciences; print reading; communication skills. Competency is demonstrated through satisfactory completion of accredited courses. Company courses or equivalency exams Ability to perform technical troubleshooting, including documenting conditions in the Maintenance Management System. Ability to communicate effectively orally using telephone and PA system. Strong commitment to safety and the ability to follow safety protocols and guidelines. Ability to work effectively as part of a team and communicate clearly with team members. Excellent attention to detail and ability to follow instructions precisely. Work Environment - Environmental or atmospheric conditions commonly associated with the performance of the functions of this job. Work on ladders, work at heights, work in high noise and/or climate temperature extremes, work near high voltage and/or rapidly rotating equipment and work in cramped and/or confined positions with occasional heavy lifting Occasional work with toxic chemicals including but not limited to solvents, acids, and caustics. Physical Abilities that is commonly associated with the performance of the functions of this job. The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Physical work in atmospheric conditions where fumes, dust and gases are present. Ability to work rotating shifts Sufficient physical strength to operate manual valves. Sufficient physical endurance for repetitive motions, such as manual valve operation and barrel moving. Cramped working conditions requiring overall flexibility, manual dexterity and adequate hand-eye coordination. Physical stamina and the ability to work in a demanding environment, including standing for extended periods, climbing stairs, and lifting heavy objects when required.

Job Description QUALITY CONSULTING GROUP, a leader in the pharmaceutical, biotech, medical devices, and manufacturing industry, is looking for a talented, highly motivated and enthusiastic to join our team. In this role, you'll work with a highly enthusiastic team, contributing in a world-class manufacturing industry in Puerto Rico & USA. Responsibilities: Support execution of cell culture processes, including: Aseptic vial thawing, Cell culture flask passaging in biosafety cabinets and Operation of benchtop wave bioreactors and 200L & 500L single-use bioreactors. Support large-scale harvest and downstream purification operations, including: Chromatography, Filtration and Ultra-Filtration/Diafiltration (UF/DF) using pilot-scale skids and equipment. Perform routine laboratory tasks, including: In-process sampling, Operation of laboratory analyzers, Sample management, Scientific data collection using electronic laboratory notebooks (ELN), Media and buffer compounding and Clean-In-Place (CIP) and Steam-In-Place (SIP). Equipment assembly and disassembly Routine maintenance of benchtop analyzers Vendor escorting and oversight General lab organization, cleaning, and inventory management Utilize scientific principles to execute experiments and analyze data Perform laboratory work according to plans and procedures in a team environment Document data and process information in accordance with Good Documentation Practices (GDP) Perform laboratory safety evaluations Conduct minor equipment maintenance Maintain laboratory standards with focus on safety, quality, and compliance Qualifications: Bachelor's degree in Engineering or Science (Preferred not required) Relevant hands-on laboratory/manufacturing experience. Internship or co-op experience is preferred. Academic laboratory experience is acceptable. Prior hands-on experience in pilot- or large-scale cell culture or downstream purification (process development or manufacturing) Experience with automated, computer-controlled biopharmaceutical equipment Knowledge of process data compilation and analysis Demonstrated problem-solving ability and strong attention to detail Excellent written and verbal communication skills Shift: 7:30am - 4pm Must be able to sit on-site, shifts may be flexible Frequent WEEKEND work required 1-3x monthly Quality Consulting Group, LLC is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law. Powered by JazzHR md06J7DBWr

The role of Wealth Management - Wealth Ops Processor-Cashiering will be part of an integrated Wealth Management Operations workforce and collaborate with departments responsible for processing annuity transactions; and assisting clients with asset/money movements. Candidates will also participate in actions to efficiently carry out day-to-day Operations by assisting internal clients including, but not limited to, Financial Advisors, Sales Assistants, Risk-Management and Compliance. Primary responsibilities include + Handling all asset/money movement transactions + Processing all physical and remote check deposits, as well as stock/bond certificates + Incoming mail handling and repository filing + Ensuring prompt, accurate and timely resolution of all requests and inquiries, including phone correspondence + Field a variety of incoming Financial Advisor calls with a passion to deliver high quality solutions for our customers + Gain deeper knowledge and understanding of Wealth Management Investment products (Stocks, Bonds, Mutual Funds, Annuities) to handle customer inquiries with increasing complexity Minimum Requirements: + Minimum of 1 year or more of bank/financial services customer service-related experience. + Demonstrated work history of strong attention to detail. + Demonstrated strong interpersonal, verbal, and written communication skills. + Proven ability for positive and customer-focused mindset. + Proven ability to be successful and adapt to a fast-paced, multi-dimensional work environment using strong time management skills. + Proven ability to successfully analyze, problem solve and make decisions independently. + Possess goal oriented professional approach with an interest in Wealth Management and Investment Products. + Completed high school degree or GED equivalent. Preferred Requirements: + Securities Licenses such as SIE, Series 7 or Series 63 highly preferred. + Demonstrated successful stable work history. + Completed associates and/or bachelors college degree preferred Hours & Work Schedule + Hours per Week: 40 + Work Schedule: + M-F: 8:30 AM ET - 5:00 PM ET; Occasional OT Optional + 100% in office. Once fully trained and performing at high level potential for 1 day WFH every week. Some job boards have started using jobseeker-reported data to estimate salary ranges for roles. If you apply and qualify for this role, a recruiter will discuss accurate pay guidance. Equal Employment Opportunity Citizens, its parent, subsidiaries, and related companies (Citizens) provide equal employment and advancement opportunities to all colleagues and applicants for employment without regard to age, ancestry, color, citizenship, physical or mental disability, perceived disability or history or record of a disability, ethnicity, gender, gender identity or expression, genetic information, genetic characteristic, marital or domestic partner status, victim of domestic violence, family status/parenthood, medical condition, military or veteran status, national origin, pregnancy/childbirth/lactation, colleague's or a dependent's reproductive health decision making, race, religion, sex, sexual orientation, or any other category protected by federal, state and/or local laws. At Citizens, we are committed to fostering an inclusive culture that enables all colleagues to bring their best selves to work every day and everyone is expected to be treated with respect and professionalism. Employment decisions are based solely on merit, qualifications, performance and capability. Why Work for Us At Citizens, you'll find a customer-centric culture built around helping our customers and giving back to our local communities. When you join our team, you are part of a supportive and collaborative workforce, with access to training and tools to accelerate your potential and maximize your career growth Background Check Any offer of employment is conditioned upon the candidate successfully passing a background check, which may include initial credit, motor vehicle record, public record, prior employment verification, and criminal background checks. Results of the background check are individually reviewed based upon legal requirements imposed by our regulators and with consideration of the nature and gravity of the background history and the job offered. Any offer of employment will include further information. 02/25/2026

Fiber Materials Inc. | engineered textile products for aerospace and defense FMI's Rhode Island facility is focused on textile engineering and manufacturing of 2D woven fabrics, 3D woven preforms, braided materials and resin transfer molded composites. We work with the stiffest, strongest, and lightest fiber in the world including carbon, glass, aramid (kevlar) and ceramic. Our products are being used on ground-breaking space initiatives such as NASA's Mars Sample Return mission, important missile programs, airfoils in commercial and military jet engines, and as lightweight armor for US military ground vehicles. Your role: FMI's Rhode Island Facility is seeking an Operator to work in our growing Woonsocket, RI location. As the Operator, you will support multiple aspects of our composite manufacturing operation including winding, creeling, loom draw and weaving loom operation. You'll be participating in projects developing process improvement methods, solutions required to enhance program quality, cost and scheduling. Being the Operator also means you have the opportunity to handle other duties as assigned and may be required to cross train to additional work centers and skill sets. Job Responsibilities: Wind spools Creel and draw weaving looms Operate weaving looms Maintain defect logs Measure and record critical dimensions using a calibrated rule and/or Vernier calipers Inspect and document parts for compliance against work instructions Package parts for final shipment What we need from you: High school diploma or equivalent GED Ability to read, write and follow written work instructions Strong attention to detail Strong mechanical aptitude and comfort level with tools and mechanical troubleshooting Strong math skills; A basic math skill test will be given to candidates Ability to lift 50lbs and stand for a full shift Preferred: Prior experience working with high end fibers including carbon, glass and ceramic Prior experience in setting up, running and troubleshooting weaving looms and winders What you'll get from us: 16 ETO days Paid Holidays Medical / Dental / Vision 401k Company Match Tuition Reimbursement $1000 Sign-On Bonus

SJS Executives, LLC (SJS) is currently seeking reliable, safety conscious, experienced Boiler Operators (3) to work full time for SJS in Newport, RI to help support ongoing operations at a Naval Station. SJS is a Service-Disabled Veteran Owned Small Business (SDVOSB) with 150 employees coast to coast and is headquartered in Virginia Beach, Virginia. SJS specializes in professional services to support federal and military organizations. The pay for this position will be based on shift. 1st shift is $37/hr, 2nd Shift is $39/hr, and 3rd Shift is $41/hr. The benefits will also include 11 paid Federal holidays per year, 56 hours accrued Sick time; and medical, health, dental, vision and life insurance package. Position will start on 1st shift and move to 2nd or 3rd shift after 2 weeks. This person will enjoy collaborating with a team and know how to conduct themselves with decorum, as they will be working on a property owned by the United States federal government and interacting with federal employees and service members. Some of the Responsibilities will include: Performs installation, maintenance, troubleshooting, and repair of equipment ranging in size and complexity from hot water tanks and domestic heating systems to power boilers, complex heating systems and auxiliary equipment. Observes and tests systems for malfunctions. Inspects and adjusts thermostats, switches, regulators, fuel cut-off devices, burners, stokers, fuel feed, flame safeguard controls, relays, solenoids, electronic controls, other safety devices and alarm systems. Replaces defective burners, pilots, valves, motors, piping, controls, fireboxes, grates, bearings, and oil seals. Removes and dismantles burner nozzle, strainer, and orifice assemblies, locates defects, repairs, or replaces parts, reassembles, and installs components, tests, and makes necessary adjustments. Service units by cleaning filters, strainers, orifices, ignition electrodes and adjusting dampers. Removes soot and fly ash from tubes, chamber ducts, chimneys, and breaching. Receives work assignments in the form of written or oral work orders and instructions. Responsible for selecting the proper materials, tools, and techniques to complete the work in a safe and efficient manner and in accordance with applicable standards. Must use all personal protective gear provided including but not limited to hearing protection, hard hats, safety glasses/eye protection, safety hard toed shoes, respiratory protection, fall protection, etc. Qualifications: In accordance with federal regulations, possession of a valid Real ID is a requirement for this position. Must possess a valid state Driver's license. Must possess a valid operator's license. OSHA 10 will be required prior to starting. Must have working knowledge of the principles and standard methods of combustion, heat transfer, fuel characteristics, ratios and arrangements of heating surfaces, and the construction and operating characteristics of a wide range of boilers and domestic heating equipment. Must have a thorough knowledge of mechanical, electromechanical, and pneumatic principles and a working knowledge of electronics. Must have a thorough knowledge of manual, electric, electronic, pneumatic, and mechanical boiler, and heating system controls. Must have the skill and knowledge to use common hand tools; power tools, stationary equipment, and machine tools, such as, saws, grinders, drill presses, and lathes; and test equipment such as pyrometer, ohmmeters, and flow meters. Must have the skill to install, align, adjust, balance and test system components and equipment. Must have the ability to apply this broad body of skill and knowledge to the full range of boilers, heating systems and equipment installed, maintained, and repaired. Must be able to successfully pass a drug test and a thorough background check for access onto a military installation; please note the background check for this position extends past 7 years, in conformance with federal law and US Department of Justice guidelines for work on a military installation. SJS Executives, LLC (SJS), also doing business as SJS Industrial, is an equal opportunity employer and does not discriminate based on race, color, ethnicity, religion, sex (including pregnancy status and/or gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, parental status, military service or other non-merit factors.

Job DescriptionDescription: This is a full-time on-site role for a Bulk Liquid Transload Operator, located in North Kingstown, RI. The Bulk Liquid Transload Operator will be responsible for managing the transfer and storage of bulk liquids between rail cars and tanker trucks. Daily tasks include monitoring and operating specialized equipment to load and unload liquid cargo, ensuring proper documentation and compliance with safety regulations, and ensuring the safe handling and transport of materials. Attention to detail and adherence to safety protocols are crucial components of this role. Requirements: Experience in operating machinery and equipment used in bulk liquid transfer Understanding of rail car and tanker truck components General understanding of boiler operations Knowledge of safety regulations and protocols related to bulk liquid handling Strong teamwork and communication skills Attention to detail and problem-solving abilities Ability to work in a physically demanding environment High school diploma or equivalent required; additional certifications in hazardous materials handling are a plus

The role of Wealth Management - Wealth Ops Processor-Cashiering will be part of an integrated Wealth Management Operations workforce and collaborate with departments responsible for processing annuity transactions; and assisting clients with asset/money movements. Candidates will also participate in actions to efficiently carry out day-to-day Operations by assisting internal clients including, but not limited to, Financial Advisors, Sales Assistants, Risk-Management and Compliance. Primary responsibilities include Handling all asset/money movement transactions Processing all physical and remote check deposits, as well as stock/bond certificates Incoming mail handling and repository filing Ensuring prompt, accurate and timely resolution of all requests and inquiries, including phone correspondence Field a variety of incoming Financial Advisor calls with a passion to deliver high quality solutions for our customers Gain deeper knowledge and understanding of Wealth Management Investment products (Stocks, Bonds, Mutual Funds, Annuities) to handle customer inquiries with increasing complexity Minimum Requirements: Minimum of 1 year or more of bank/financial services customer service-related experience. Demonstrated work history of strong attention to detail. Demonstrated strong interpersonal, verbal, and written communication skills. Proven ability for positive and customer-focused mindset. Proven ability to be successful and adapt to a fast-paced, multi-dimensional work environment using strong time management skills. Proven ability to successfully analyze, problem solve and make decisions independently. Possess goal oriented professional approach with an interest in Wealth Management and Investment Products. Completed high school degree or GED equivalent. Preferred Requirements: Securities Licenses such as SIE, Series 7 or Series 63 highly preferred. Demonstrated successful stable work history. Completed associates and/or bachelors college degree preferred Hours & Work Schedule Hours per Week: 40 Work Schedule: M-F: 8:30 AM ET - 5:00 PM ET; Occasional OT Optional 100% in office. Once fully trained and performing at high level potential for 1 day WFH every week.

Summary: Maintains, repairs, inspects and installs steam plant/refrigeration plant, machinery and associated equipment. Working Days Sunday through Thursday 7:00 am - 3:00 pm# Education: Skills normally obtained through completion of a High School education. Licensure: Must obtain a City of Providence Boiler Operator or Stationary Engineer License. Experience: Three to five years# experience in boiler operator or Stationary Engineering field. Working Conditions, Physical Environment and/or Safety Requirements: Work requires person to stand or walk most of the day. On average, approximately 75% of the tasks involve lifting weights in the range of 5 to 10 pounds and 5% of the tasks involve lifting weights in the range of 25 to 50 pounds. On average, approximately 50% of the tasks involve reaching overhead and working off of ladders most of this time. On average, approximately 5% of the duties involve working with hazardous substances that necessitate the use of safety apparel. Occasionally some of the duties involve working on or around moving machinery, electrical systems, infectious systems, excessive heat, dust and noise that necessitates the use of proper precautions. Maintains all safety requirements associated with the Medical Center. Occasionally works other hours or shifts in order to complete emergency/critical tasks or tasks that cannot be completed during normal shift hours. Summary: Maintains, repairs, inspects and installs steam plant/refrigeration plant, machinery and associated equipment. Working Days Sunday through Thursday 7:00 am - 3:00 pm Education: Skills normally obtained through completion of a High School education. Licensure: Must obtain a City of Providence Boiler Operator or Stationary Engineer License. Experience: Three to five years' experience in boiler operator or Stationary Engineering field. Working Conditions, Physical Environment and/or Safety Requirements: Work requires person to stand or walk most of the day. On average, approximately 75% of the tasks involve lifting weights in the range of 5 to 10 pounds and 5% of the tasks involve lifting weights in the range of 25 to 50 pounds. On average, approximately 50% of the tasks involve reaching overhead and working off of ladders most of this time. On average, approximately 5% of the duties involve working with hazardous substances that necessitate the use of safety apparel. Occasionally some of the duties involve working on or around moving machinery, electrical systems, infectious systems, excessive heat, dust and noise that necessitates the use of proper precautions. Maintains all safety requirements associated with the Medical Center. Occasionally works other hours or shifts in order to complete emergency/critical tasks or tasks that cannot be completed during normal shift hours.

Are you enthusiastic about safe excavation and skilled in operating hydrovac equipment? Join the Badger team as a Hydrovac Operator! In this role, you'll use high-pressure water and vacuum systems to dig precisely and efficiently, uncover utilities, and contribute to various construction projects. If you're detail-oriented, safety-conscious, and ready to be part of essential infrastructure work, apply now to join our dedicated team. Salary: Union wages and benefits to be discussed directly with the Branch Manager. What We're Looking For: Must have a valid Class A or B CDL CPR/First Aid, Fall Protection and OSHA 10 certification (preferred) Experience driving a manual transmission (10-18 speed) without automatic restrictions (preferred) Ability to work variable shifts with extended hours Must be willing to travel up to 25% Must be able to lift, push, pull 50+ pounds and have the physical stamina for manual labor in varying weather conditions Prior hydrovac equipment operations or related industrial experience preferred Must be at least 21 years of age What You'll Need For Success: Customer service focused and comfortable with customer interaction Enthusiasm for being part of a safety-focused collaborative team Technology adept Personal protective equipment (PPE) provided Candidates must undergo a physical examination and complete pre-employment screenings such as a driver's abstract review and drug and alcohol test This position is in a region that is covered under a collective bargaining agreement, the successful applicant may be required to join the union as a condition of employment If you feel you don't have the experience listed above, but still think you are qualified for the job, we encourage you to apply for consideration. What You'll Be Doing: Operating hydrovac equipment and performing hydrovac duties in a variety of working environments, including confined spaces Driving our hydrovac trucks (10-15% of total work time) Attending safety meetings Performing routine inspections and minor repairs of the hydrovac equipment Preparing work areas by setting up safety measures and addressing potential hazards Documenting and reporting all Badger, Federal, State, and Customer paperwork accurately and efficiently

The role of Wealth Management - Wealth Ops Processor-Cashiering will be part of an integrated Wealth Management Operations workforce and collaborate with departments responsible for processing annuity transactions; and assisting clients with asset/money movements. Candidates will also participate in actions to efficiently carry out day-to-day Operations by assisting internal clients including, but not limited to, Financial Advisors, Sales Assistants, Risk-Management and Compliance. Primary responsibilities include * Handling all asset/money movement transactions * Processing all physical and remote check deposits, as well as stock/bond certificates * Incoming mail handling and repository filing * Ensuring prompt, accurate and timely resolution of all requests and inquiries, including phone correspondence * Field a variety of incoming Financial Advisor calls with a passion to deliver high quality solutions for our customers * Gain deeper knowledge and understanding of Wealth Management Investment products (Stocks, Bonds, Mutual Funds, Annuities) to handle customer inquiries with increasing complexity Minimum Requirements: * Minimum of 1 year or more of bank/financial services customer service-related experience. * Demonstrated work history of strong attention to detail. * Demonstrated strong interpersonal, verbal, and written communication skills. * Proven ability for positive and customer-focused mindset. * Proven ability to be successful and adapt to a fast-paced, multi-dimensional work environment using strong time management skills. * Proven ability to successfully analyze, problem solve and make decisions independently. * Possess goal oriented professional approach with an interest in Wealth Management and Investment Products. * Completed high school degree or GED equivalent. Preferred Requirements: * Securities Licenses such as SIE, Series 7 or Series 63 highly preferred. * Demonstrated successful stable work history. * Completed associates and/or bachelors college degree preferred Hours & Work Schedule * Hours per Week: 40 * Work Schedule: * M-F: 8:30 AM ET - 5:00 PM ET; Occasional OT Optional * 100% in office. Once fully trained and performing at high level potential for 1 day WFH every week. Some job boards have started using jobseeker-reported data to estimate salary ranges for roles. If you apply and qualify for this role, a recruiter will discuss accurate pay guidance. Equal Employment Opportunity Citizens, its parent, subsidiaries, and related companies (Citizens) provide equal employment and advancement opportunities to all colleagues and applicants for employment without regard to age, ancestry, color, citizenship, physical or mental disability, perceived disability or history or record of a disability, ethnicity, gender, gender identity or expression, genetic information, genetic characteristic, marital or domestic partner status, victim of domestic violence, family status/parenthood, medical condition, military or veteran status, national origin, pregnancy/childbirth/lactation, colleague's or a dependent's reproductive health decision making, race, religion, sex, sexual orientation, or any other category protected by federal, state and/or local laws. At Citizens, we are committed to fostering an inclusive culture that enables all colleagues to bring their best selves to work every day and everyone is expected to be treated with respect and professionalism. Employment decisions are based solely on merit, qualifications, performance and capability. Background Check Any offer of employment is conditioned upon the candidate successfully passing a background check, which may include initial credit, motor vehicle record, public record, prior employment verification, and criminal background checks. Results of the background check are individually reviewed based upon legal requirements imposed by our regulators and with consideration of the nature and gravity of the background history and the job offered. Any offer of employment will include further information. Benefits We offer competitive pay, comprehensive medical, dental and vision coverage, retirement benefits, maternity/paternity leave, flexible work arrangements, education reimbursement, wellness programs and more. View Benefits Awards We've Received Age-Friendly Institute's Certified Age-Friendly Employer The Banker's US Bank of the Year Dave Thomas Foundation's Best Adoption-Friendly Workplace Disability:IN Best Places to Work for Disability Inclusion Human Rights Campaign Corporate Equality Index 100 Award

SJS Executives, LLC (SJS) is currently seeking reliable, safety conscious, experienced Boiler Operators (3) to work full time for SJS in Newport, RI to help support ongoing operations at a Naval Station.

Fiber Materials Inc. | engineered textile products for aerospace and defense FMI's Rhode Island facility is focused on textile engineering and manufacturing of 2D woven fabrics, 3D woven preforms, braided materials and resin transfer molded composites. We work with the stiffest, strongest, and lightest fiber in the world including carbon, glass, aramid (kevlar) and ceramic. Our products are being used on ground-breaking space initiatives such as NASA's Mars Sample Return mission, important missile programs, airfoils in commercial and military jet engines, and as lightweight armor for US military ground vehicles. Your role: FMI's Rhode Island Facility is interested in hiring an Operator to work in our growing Woonsocket, RI facility. Operators supports multiple aspects of our composite manufacturing operation including winding, twisting, spinning, gilling and the stretch breaking operation. Participate in projects developing process improvement methods, solutions required to enhance program quality, cost and scheduling. Perform other duties as assigned and may be required to cross train to additional work centers and skill sets. Job Responsibilities: Wind spools Creeling and lacing equipment such as spinning frames and looms Creel and lace a twisting machine Operate the various equipment associated with stretch breaking (operating various pieces of equipment) Maintain defect logs Measure and record critical parameters using various calibrated instruments Inspect and document parts for compliance against work instructions Prepare completed units for the next phase of production or shipment What we need from you: Ability to read, write and follow written work instructions Strong attention to detail Strong mechanical aptitude and comfort level with tools and mechanical troubleshooting Strong math skills Preferred: Prior experience working with high end fibers including carbon, glass and ceramic What you'll get from us: 16 ETO days Paid Holidays Medical / Dental / Vision 401k Company Match Tuition Reimbursement $1000 Sign-On Bonus

Full-time Description This is a full-time on-site role for a Bulk Liquid Transload Operator, located in North Kingstown, RI. The Bulk Liquid Transload Operator will be responsible for managing the transfer and storage of bulk liquids between rail cars and tanker trucks. Daily tasks include monitoring and operating specialized equipment to load and unload liquid cargo, ensuring proper documentation and compliance with safety regulations, and ensuring the safe handling and transport of materials. Attention to detail and adherence to safety protocols are crucial components of this role. Requirements Experience in operating machinery and equipment used in bulk liquid transfer Understanding of rail car and tanker truck components General understanding of boiler operations Knowledge of safety regulations and protocols related to bulk liquid handling Strong teamwork and communication skills Attention to detail and problem-solving abilities Ability to work in a physically demanding environment High school diploma or equivalent required; additional certifications in hazardous materials handling are a plus

Carrier, global leader in intelligent climate and energy solutions, is committed to creating innovations that bring comfort, safety and sustainability to life. Through cutting-edge advancements in climate solutions such as temperature control, air quality and transportation, we improve lives, empower critical industries and ensure the safe transport of food, life-saving medicines and more. Since inventing modern air conditioning in 1902, we lead with purpose: enhancing the lives we live and the world we share. We continue to lead because of our world-class, inclusive workforce that puts the customer at the center of everything we do. For more information, visit corporate.carrier.com or follow Carrier on social media at @Carrier. NORESCO, a part of Carrier Global Corporation, helps clients modernize aging building systems and upgrade energy and water infrastructure to meet the evolving demands of the 21st century. We implement innovative energy efficiency, distributed generation, energy storage, and renewable energy solutions that optimize the operational efficiency and improve resilience of buildings, campuses, military installations, and communities. To date, NORESCO has implemented solutions that provide more than $5 billion in guaranteed energy and operating cost savings at more than 10,000 facilities, while reducing customer CO2 emissions by more than 25 million metric tons - the equivalent of planting 1.4 million acres of forest. About This Role The Power Plant Shift Operator is responsible for the safe and efficient operation of the onsite power plant supporting the John O. Pastore Center in Cranston, Rhode Island. Working in rotating 12-hour shifts, this role ensures continuous plant operations by monitoring two gas turbine generators and associated systems. The Power Plant Shift Operator reports directly to NORESCO's Plant Manager. Comprehensive equipment and site-specific training will be provided. Key Responsibilities: Operate and monitor major plant equipment, including: Two gas turbine electrical generators and heat recovery steam generators One water tube boiler and one steam turbine generator A black start/peak load shave gas engine generator Supporting systems such as steam/feed/condensate systems, natural gas compressors, air compressors, water treatment systems, electrical switchgear, motor control centers, pumps, motors, and control systems Respond to emergencies to restore operations following equipment failures or plant trips Perform city water and boiler water chemistry testing; adjust chemical dosing as required. Conduct routine plant inspections, complete operational log sheets, and document issues. Follow oral and written instructions accurately. Proactively identify and address potential equipment failure indicators. Execute planned and preventive maintenance activities. Perform corrective and emergent maintenance as assigned. Maintain onsite tool and spare parts inventory. Collaborate with customers and subcontractors as assigned. Foster and maintain positive customer relationships. Required Qualifications: High school diploma or GED. 1+ years' experience with operations or maintenance of power plant equipment (gas turbines, steam turbines, boilers, and/or reciprocating engines) 1+ year experience with safety related programs (LOTO, HAZMAT, PPE) Carry up to 50 pounds up and down multi levels of stairs; able to climb 10ft ladders; comfortable working on elevated platforms. Current state issued driver's license Ability to work days, nights, weekends, and holidays (as rotating shift schedule dictates) Ability and willingness to cover shifts for other operators, as needed Preferred Qualifications: Excellent mechanical/electrical aptitude (ability to troubleshoot, restore, and maintain a wide variety of equipment). Practical knowledge of basic mechanical and electrical equipment. Practical knowledge of power and steam generation. Experience with operating and/or maintaining power generation equipment and facilities. Experience with water chemistry control Familiarity with Microsoft Word, Excel, and Outlook Effective writing and verbal communication skills. Familiarity with a Computerized Maintenance Management System (CMMS). Candidate should live within 1 hour of the job site (or be willing to move there). OSHA 10 certification (or ability to earn certification after hiring). Ability to follow directions and perform work under the direction of the operations and maintenance supervisor. Benefits Employees are eligible for benefits, including: Health Care benefits: Medical, Dental, Vision; wellness incentives Retirement benefits Time Off and Leave: Paid vacation days, up to 15 days; paid sick days, up to 5 days; paid personal leave, up to 5 days; paid holidays, up to 13 days; birth and adoption leave; parental leave; family and medical leave; bereavement leave; jury duty; military leave; purchased vacation Disability: Short-term and long-term disability Life Insurance and Accidental Death and Dismemberment Tax-Advantaged Accounts: Health Savings Account; Healthcare Spending Account; Dependent Care Spending Account Tuition Assistance To learn more about our benefits offering, please click here: Work With Us | Carrier Corporate The specific benefits available to any employee may vary depending on state and local laws and eligibility factors, such as date of hire and the applicability of collective bargaining agreements. The hourly rate for this position is between $29.70 - $ 48.29 per hour. Factors which may affect pay within this range include, but are not limited to, skills, education, experience, and other unique qualifications of the successful candidate. Applications will be accepted for at least 3 days from Job Posting Date. Job Posting Date: 01/12/2025 Carrier is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class. Job Applicant's Privacy Notice: Click on this link to read the Job Applicant's Privacy Notice

Are you enthusiastic about safe excavation and skilled in operating hydrovac equipment? Join the Badger team as a Hydrovac Operator! In this role, you'll use high-pressure water and vacuum systems to dig precisely and efficiently, uncover utilities, and contribute to various construction projects. If you're detail-oriented, safety-conscious, and ready to be part of essential infrastructure work, apply now to join our dedicated team. Salary: Union wages and benefits to be discussed directly with the Branch Manager.