Plumber jobs in Newport News, VA - 106 jobs

We have a wonderful opportunity for a Pipefitter in Newport News, VA with one of our Clients in the Ship Repair Industry. ESSENTIAL DUTIES AND RESPONSIBILITIES: Must be able to pass hair follicle drug test Read and interpret ship piping drawings Experienced fitting carbon steel, CRES, and copper nickel piping Ability to end prep piping by hand and/or with Wach or Portsmouth Machine Knowledge in installing pipe hangers Ability to read a ruler using inches and tenths Prep and fit-up backing rings Clean cut/break pipe with a grinder Ability to hand prep V bevels Experience in fabrication of various details and assemblies from drawings Bend pipe from template and in the use of a hand bender Must be able to fit brazed joints with/without insert ring Prep and fit-up backing rings HOURS: 1st Shift-7am-3:30pm 2nd Shift-3:30pm-12:00Am 3rd Shift- 10:00pm-6:00am Must be open to all shifts PAY: $29.50/Hour based on experience; Per Diem is offered for Non-local #ISS

Job DescriptionJob Opportunity: Pipefitter Location: Newport News, VA Pay: $29.50/hr (Local) | $29.50/hr and $145 Per Day Worked for Per Diem (Non-Local) Schedule: Full-Time, Contract | 40 hrs/week About the RoleLayout, fit, and install shipboard piping systems to isos/spools.Key Responsibilities- Measure/layout runs; cut/thread/bevel pipe.- Install hangers/supports; assist with hydro tests.- Work closely with welders for quality fit-ups.Requirements- 3+ years pipefitting (marine/industrial).- Strong print reading and measurement skills.- HS diploma/GED; background & drug screening.How to Apply Undrae: 757-260-9842 | Ashlie: 423-825-8091 | Jeremy: 206-960-2017 umorrow@leadstaff.com • areddin@leadstaff.com • jreask@leadstaff.com Equal Opportunity StatementLEAD is an Equal Opportunity and Affirmative Action Employer. LEAD is committed to providing an environment of mutual respect where employment opportunities are available to all applicants without regard to race, color, religion, sex, pregnancy (including childbirth, lactation and related medical conditions), national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information (including characteristics and testing), military and veteran status, and any other characteristic protected by applicable law. We believe that diversity and inclusion is critical to our success as a growing national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool.

A1 Sewer & Drain, A Groundworks Company, is seeking a proven Plumbing Assistant to join their team Our Plumbing Assistant inspects company-provided calls for servicing preexisting equipment and installation of new. This is manual work assisting a Plumbing Technician in the installation, maintenance, and repair of plumbing for both residential and commercial. Work involves performance of skilled plumbing tasks in maintaining, repairing, and servicing fixtures and equipment. Routine maintenance, service, and repair work are performed independently unless a helper is needed. What we provide for our employees: Full-time non seasonal work. Great pay!!! Monthly Bonus Programs. Additional pay for afterhours calls. Company Uniforms. Company provided work truck. Dispatch from home every day. We provide pre-scheduled calls based on your availability. Superior training will ensure you start with immediate success. Competitive and rewarding, family-oriented culture. World-class training and support. Benefits include Medical, Dental, Optical, Long/Short Term Disability, Life insurance, 401(k) with 4% company match, and paid time off including 6 paid holidays. Job Responsibilities: Travel to a customer's home on a pre-set appointment. Build rapport with homeowners and professionally represent the Company. Exhibit clear communication skills during homeowner interactions. Must be available to work at 7am, and work until manager/dispatcher dismisses you for the day. Some weekend and evenings being on call is required. Installing our products and services under the supervision of trained professionals Installation, Maintenance, and repair of plumbing for both residential/commercial Weekly meeting at the shop. Be a team player who will do whatever it takes to win for you, your team and the organization Ability to listen well and follow instructions closely Ability to grind it out every day knowing that hard work is rewarded What is required to join our team as a Plumbing Helper: Residential plumbing service and installation experience for at least 1 year. Loads and delivering materials to work site Performs set up and clean up tasks at the work site Strong finger and manual dexterity for handling pipes and plumbing fixtures. Detail-oriented, organized and proficient. Willing to work in all types of weather. Knowledge of the hazards and safety precautions of the work. Must have basic tools. Valid Driver's license and good driving record. Enters crawl spaces and other confined areas Other duties as assigned by supervisor Physical requirements: Lifting heavy objects, walking and standing for long periods of time and performing strenuous physical labor under adverse field conditions. Pushing, pulling, or carrying objects; bending, stooping, kneeling, and crawling. Requires entry into some tight spaces. A1 Sewer & Drain, a Groundworks Company, has been serving customers since 1987. They've consistently served residential and commercial plumbing needs of satisfied customers in Virginia Beach, Norfolk, Chesapeake, Hampton, Newport News, Williamsburg, Yorktown, Suffolk, Portsmouth, Tabb, Grafton, Smithfield, James City County, and Hampton Roads. A Class A licensed contractor that holds an A+ rating by the Better Business Bureau which highlights their ability to help every customer with a team of experienced, uniformed, well-trained professionals that take great pride in what they do. They provide a 100% guarantee on all work, unless otherwise noted with competitive rates, dependable service, and 24/7 emergency services. Groundworks is the leading provider of Foundation Repair, Crawl Space Encapsulation, Basement Waterproofing, and Concrete Lifting & Stabilization. With locations across the USA and Canada, Groundworks is the leading foundation solutions and water management company in North America! Recognized as a Top Workplaces USA™ company and offering employee ownership for everyone, we're building something that just can't be replicated. And we're on a mission to change an industry like never before! We're unique here at Groundworks. We are all connected through the same vision, mission, and values, and we are stronger together. We're proud to be the Groundworks Tribe! Our highly trained teams have decades of experience delivering innovative solutions, unmatched quality, and industry-leading warranties, helping homeowners everywhere protect and repair their most valuable asset - their home. When customers choose a local Groundworks company, they can feel confident they're hiring the trusted local experts who will ensure the job's done right. When you choose Groundworks, you'll join thousands of Tribemates who are making history.

Job Description Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to gain experience, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we are looking for the best at what they do' to join our team and help us grow. *Please note that due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Position Description: We are seeking a highly skilled Pipefitter II to join our shipyard team in Norfolk, VA. This role is responsible for the layout, fabrication, installation, and testing of piping systems aboard U.S. Navy and commercial vessels. The ideal candidate will have strong experience working in shipbuilding or ship repair environments and a thorough understanding of NAVSEA standards and shipboard systems. Duties & responsibilities include but are not limited to: Lay out, fabricate, fit, and install pipe and tubing for a variety of fluid, drain, and pneumatic systems in accordance with drawings, MILSPECs, and NAVSEA standards for various systems (fluid, drain, fuel, hydraulic, air, ect.). Install structural supports for piping systems and equipment. Read and interpret maritime blueprints and specifications (standard and metric). Perform basic pipe bending using hand or crank-style pipe benders. Fit and install flanges, valves, and related piping components. Execute tack welding as needed for assembly fit-up. Perform hydrostatic pressure testing of installed systems following approved procedures. Prepare and install system modifications (TEMPALTs, SHIPALTs, ORDALTs) in accordance with official directives and work instructions. Pre-fabricate piping assemblies in a shop environment based on removed components and work instructions. Perform brazing and operate gas-free equipment safely and effectively. Plan and lay out piping systems allowing systems for system specs, structural penetrations, and physical obstructions. Measure, cut, and bore holes in decks and bulkheads for piping system installations. Operate shop equipment to cut, thread, and shape pipes and fittings. Tests completed installations using hydrostatic or similar pressure testing techniques to ensure system integrity. Identify and select appropriate piping materials for specific system requirements based on technical drawings. Support additional duties as assigned in support of production or maintenance goals. Qualifications: 3-5 years of maritime or shipyard pipefitting experience required. Familiarity with NAVSEA Standard Items, MILSPECs, and shipyard work instructions. Strong understanding of shipboard mechanical systems and installations. Must be able to obtain security clearance or meet access requirements for naval shipyards, if applicable. Must be able to meet the physical requirements of the job. Must be able to pass an Audiogram & Respirator Fit Test. Must be able to communicate effectively to exchange and comprehend information both verbally & electronically with customers & supervisors. Must have familiarly using MS Office products (i.e. Word, Outlook ect.) Working Conditions: Exposure to open-air environments, including noisy, hot, and cold conditions. Required to visit project sites aboard ships and rigs, both onshore and offshore. Must wear various types of personal protective equipment (PPE), such as hearing, eye, head, and hand protection, as required. Site visits may involve standing on a variety of surfaces and angles, bending, crouching, and climbing over obstructions such as scaffolding, ladders, and internal barge or boat structural components. Exposure to sound levels exceeding 100 decibels. Must possess sufficient visual acuity, peripheral vision, depth perception, and night vision to inspect maritime components and systems, identify defects or irregularities, and safely operate tools and equipment. May work in confined spaces with limited ventilation. Requires prolonged periods of sedentary work, including sitting and/or standing. May be required to operate machinery, power tools, and/or heavy equipment. Frequent exposure to extreme weather conditions, including high heat and cold. Must be able to lift up to 50 lbs, or more, climb ladders, and work in confined or elevated area. Benefits: Continental Tide offers an empowering professional environment in a culture that emphasizes teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tide is an Equal Opportunity Employer and participates in E-Verify and U.S. citizenship is required for most positions. Continental Tide prohibits discrimination against any protected class from discrimination on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. These protections extend to all management practices and decisions, including recruitment and hiring, appraisal systems, promotions, training, and career development programs. Consistent with these obligations, Continental Tide also provides reasonable accommodations to employees and applicants with disabilities; known limitations related to pregnancy, childbirth, or related medical conditions; and for sincerely held religious beliefs, observances, and practices. Reasonable Accommodations Statement: To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of an employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Apply Today: If you're ready to make a difference, we encourage you to apply and become a part of our mission to deliver quality solutions to the Fleet. To be considered you must apply by going to *********************** See all of our latest opportunities at *********************** or follow us on our LinkedIn page at ********************************************************* Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other protected class. “This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a). This regulation prohibits discrimination against qualified protected veterans and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans.”

Job DescriptionBenefits: 401(k) matching Bonus based on performance Competitive salary Paid time off Health insurance About the Role: Join Mr. Rooter Plumbing of Virginia Beach as a Service Plumber and become an essential part of our dedicated team. We are committed to providing top-notch plumbing services with a focus on customer satisfaction and professionalism. If youre passionate about plumbing and delivering exceptional service, we want to hear from you! Responsibilities: Diagnose and repair plumbing issues including leaks, clogs, and pipe installations. Perform routine maintenance and inspections on plumbing systems. Install fixtures, water heaters, and other plumbing equipment. Provide excellent customer service and communicate effectively with clients. Maintain a clean and organized work environment. Adhere to safety protocols and local plumbing codes. Document services performed and maintain accurate records. Work collaboratively with team members to ensure efficient service delivery. Requirements: Valid Virginia plumbing license or certification. Minimum of 2 years of residential plumbing experience. Strong troubleshooting and problem-solving skills. Excellent communication and customer service abilities. Ability to work independently and as part of a team. Familiarity with plumbing tools and equipment. Reliable transportation and a valid driver's license. Positive attitude and a commitment to quality workmanship. About Us: Mr. Rooter Plumbing of Virginia Beach has been serving the community for over 8 years, earning a reputation for reliability and excellence. Our customers love us for our honest pricing, skilled technicians, and commitment to their satisfaction. We pride ourselves on creating a supportive work environment where employees can grow and thrive in their plumbing careers.

Venture Dynamics is seeking skilled Pipefitters to join our team. Will be responsible for installing, assembling, fabricating, maintaining, and repairing mechanical piping systems. - Read and interpret blue prints/sketches and install all piping systems with limited supervision. -Perform shop prefab on piping systems using sketches/templates developed from blue prints and ship check. -Rip out, repair, target, layout, fabricate, install and test marine piping systems onboard ships in various stages of repair and modernization -Repair and replacement of ships piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. are accomplished utilizing work item specifications, NAVSEA/Military standards and marine blueprints -Necessary fabrication abilities include the use of various shop equipment such as table saws, pipe threading machines, bending machines (power as well as hand operated), drill presses and brazing equipment -Tasks associated with this position are the strain free of pumps and miscellaneous ship equipment as well as blanking, pressure testing of tanks (structural boundary testing) and unblinking of the same. - Proficiency in blueprint reading - Mechanical knowledge for pipe system installation - Familiarity with codes and standards related to pipefitting - Ability to plumb pipes accurately - Experience using calipers for precise measurements - Strong understanding of basic math for measurements and calculations Candidates must pass a drug screen and background checks are required for this position. This position offers the opportunity to work in a dynamic environment where your skills will be valued. If you possess these skills and are looking to grow in the field of pipefitting, we encourage you to apply. Job Types: Full-time, Contract Pay: $28.00 - $32.00 per hour Expected hours: 40-50 per week Benefits: Dental insurance Health insurance Referral program Schedule: 10-12 hour shift Day shift Monday to Friday Overtime Weekends as needed Experience: Pipefitting: 4 and plus years of experience Ability to Commute: Norfolk, VA (Required)

Pipefitter I, II, III FLSA Status: Full-Time, Non-Exempt REQ#26_01126F-1 Summary of duties - Pipefitter (levels I, II, III) with limited supervision, performs variety of skilled mechanical duties involving general fitting piping systems on vessels, burning/brazing, testing and sketching piping systems. Operates equipment for assembly and installation; performs preventative and predictive maintenance on facility machinery; records work performed and follows specified safety policies and procedures. May be assigned the duties and responsibilities of other positions for which qualifications are met. Periodically required to lift/move equipment up to and including 50 pounds. Specific description of duties: Studies blueprints, sketches, drawings, manuals, specifications or sample part, with minimal supervision, to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements Ability to work in a shop setting as well as onboard a ship. Ability to work in tight and/or confined spaces. Verifies conformance of finished work piece to specifications • Know the basic tools required and their uses • Identification of piping by class, schedule, size, and the systems in which they are used. • Know types of bevels, backing rings, consumable inserts (E/B ring), open roots, saddles, and miters. • Layout, fabricate, assemble, install and maintain piping, piping systems, fixtures and equipment. • Works with steam, water, air, fuel, lube oil, sea water, and various chemicals. • Develops specifications from general description and draws sketch of part or product to be fabricated • Ensures proper care in the use and maintenance of equipment and supplies; promotes continuous improvement of workplace safety and environmental practices • Experience with SMAW and GTAW for tacking purposes of piping, hangers, brackets, and other items to support on-site installations. • Assembles piping by means of welding, brazing, soldering, threading, lock ringing and bolting. • Cuts and bores holes in structures, decks, bulkheads, and walls by use of torch, handheld, or other power tools. • Maintains cleanliness of the work area Responsible for training/oversite of junior personnel • Overtime is routinely required but not guaranteed • Travel outside the local area may be required • Perform any other assignments or tasks as needed or requested by management to assist in accomplishing the organization's mission, objectives and goals. Including the periodic oversight of junior less skilled Welders as applicable. Education/Specialized Training: Level I: • HS diploma or GED may be required depending on varying contract stipulations Apprenticeship or Welding trade school with six months practical experience or one year of practical relatable experience Level II: • HS diploma or GED may be required depending on varying contract stipulations • Apprenticeship or applicable trade school with three years, or four years practical related experience Level III: • HS diploma or GED may be required depending on varying contract stipulations • Apprenticeship or applicable trade school with six years practical experience, or 8 years related experience. Certification/Licenses (as required for the task being performed) Certificate documentation required for listed education Certification documentation in areas of expertise Fire watch certification Security Clearance: Clearance up to secret level may be required. Physical/Environmental Job Requirements: Lifting/moving up to and including 50 pounds Routinely climbing several flights of stairs Performing tasks in confined spaces Our work is primarily onboard naval vessels that may include variables of physical activity, i.e. stooping, climbing, walking, etc. In performing these duties, you may be required to work outdoors. You will experience temperature variations, extremely loud noises and other physical hazards. Company Overview: Prism Maritime, LLC is a premier maritime service provider for Alteration Installation Team (AIT) and Modernization related Services in support of US Maritime and Shore-based clients. Prism Maritime is a privately held business headquartered in Chesapeake, VA, with offices in San Diego and Ventura, CA. Established in 2006, Prism Maritime currently employs over 350 professionals and maintains an ISO 9001-2015 certified Quality Management System. Prism Maritime is an EEO/AA employer. We invite resumes from all interested parties without regard to race, color, religion, sex, national origin, ethnic origin, physical or mental disability, veteran status, age, or any other characteristic protected by federal, state, or local laws. U.S. citizenship is required for most positions. If you need special assistance or an accommodation while seeking employment with us, please email ********************************* or call: ************. To Apply: Visit ********************* and click on Careers>Job Openings All applications are active for 90 calendar days. After 90 days you must re-apply to still be considered for this position.

JOB DESCRIPTION SUMMARY/OBJECTIVE The Pipefitter JM3 Modifies, installs, and tests Piping Systems on Navy Ships and other Marine Vessels. Reads job specifications to accomplish requirements Ability to read all blueprints and other documentation Ability to accomplish Piping modifications and new installations with no supervision Ability to run a small crew as a key journeyman Accomplish all type of testing, hydro and air Must be able to bend and thread piping Set up all phases of Hot Work Must adhere to a promote ALL company safety policies. Wear all required PPE when in Production areas and promote a clean and safe work environment. Ensure that employees assigned with Firewatch duties are in place and ready prior to begin hot work Fill out Job JSA forms PHYSICAL DEMANDS The Pipefitter JM3 must be able to meet and successfully perform the essential functions of this job. The following physical demands are representative to the position. The position is active and requires extensive standing, walking, sitting, bending, kneeling, stooping, crawling, climbing, and crouching. Along with such movements, employee is required to lift parts/machinery of up to 50 pounds. Additional demands are listed below: Able to climb ladders and work off scaffolding Able to lift, carry, and or push up to 50 lbs. throughout the shift (including overtime) * Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions KNOWLEDGE / SKILLS Must be certified in Silver Brazing Must follow all Safety and Company Policies Ability to accomplish testing of all systems Ability to troubleshoot drawing problems and provide solutions Employee must be able to properly set up brazing/cutting equipment onboard a ship Able to operate various equipment, benders/threaders etc. Have knowledge of all types of piping systems COMPETENCIES Communication Proficiency Flexibility (Job duties & schedule) Work well with others in all areas where SCW&M is performing work Follow verbal/written instructions Able to work independently Teamwork orientation SUPERVISORY RESPONSIBILTY Pipefitter JM3 position has minimal supervisory responsibilities. POSITION TYPE / HOURS OF WORK This is a full-time position, 40 hours per week. Schedule is Monday- Friday, 6:00 a.m. to 2:30 p.m. / 2:30 p.m. to 11:00 p.m. (swing shifts dependent on work load). Occasional overtime and weekend work may be required based on production needs. REQUIRED EDUCATION AND EXPERIENCE Must be Silver Braze Certified Must have a minimum of 5-10 years of ship repair experience and qualifications. Must be able to speak and understand Basic English WORK AUTHORIZATION CLEARANCE For E-verify and contract security purposes (including ship access lists), all employees MUST present a valid export document. Acceptable documents are U.S. Birth Certificate, Certificate of Naturalization, Passport, Passport Card and Permanent Resident Card. OTHER Please consider that duties, responsibilities, and all other points specified in this description can change at any time with or without notice.

Job DescriptionSalary: $27.23 - 32.16/hr Pipefitters are responsible for installing, fitting, and assembling piping systems made of materials such as steel, galvanized, copper, copper-nickel, and stainless steel, in a safe and efficient manner. Work is performed using appropriate tools, valves, and fittings, following technical drawings, blueprints, and specifications to ensure accurate and compliant system installations. 1st Class Mechanics are expected to independently receive assignments, plan the work, identify material requirements, and execute tasks efficiently and accurately. Duties & Responsibilities Wear required personal protective equipment (PPE) and always adhere to all OSHA safety standards and Tcnico safety policies. Must adhere to all applicable safety, technical, and regulatory guidelines, including but not limited to: Company policies and procedures Local, state, and federal regulations ABS, USCG, NAVSEA Standard Items, and MSC GTRs ASME/ANSI Codes and OEM Specifications MIL-STD (e.g., 777E, 22D, 1627) General Specifications for Overhaul of Ships Applicable special procedures (e.g., pipe bending (Mil-STD-1627), brazed systems (7000)) Perform layout, fabrication, installation, modification, testing, and repair of piping systems using various materials (copper, CuNi, CRES, steel, etc.). Proficient at reading and interpreting blueprints, drawings, and sketches; create fabrication sketches and targets for new installations and mock-ups. Install systems with or without blueprints, including building mock-ups and off-site prefabrication. Ability to troubleshoot and resolve issues related to pipe fitting removals and installation. Prepare pipe joints for welding, brazing, soldering, threading or gluing, ensuring adherence to required tolerances. Operate pipe bending machines and torches; fabricate and install pipe hangers and supports. Proficient at performing air, hydrostatic, static and operational tests on piping systems in accordance with safety and quality standards, including 009-71. Calculate joint allowances, take-offs, and tolerances for butt welds, socket welds, braze and threaded joints. Must be proficient in performing silver brazing (Grades 3, 4, and 5) and installing various MAF fittings. Work independently and safely, following all applicable procedures, specifications, and safety regulations. Must have the ability to use hand tools and instruments associated with the Pipefitting trade including but not limited to, pipe benders, bandsaws, grinders, drills and pipe threaders. Also possess and maintain personal hand tools necessary to accomplish their trade. Read and interpret Chemist and Competent Person reports to ensure safe conditions for hot work. Conduct self-inspections to ensure work meets quality standards and complies with applicable drawings and specifications. Provide guidance and train junior craftsmen, providing direction as a senior mechanic when required. Maintain a good attendance record, demonstrate a positive and professional attitude, work well with others, take pride in your work, and be receptive to constructive feedback from mentors (supervisor, PMT, etc.). Certification Requirements Must be certified to braze (Grade 3, Grade 4, and Grade 5) Certified in LOK-Ring (MAF fittings) Experience Requirements 4 - 6 years of experience as a Pipefitter in a shipyard. (1st Class) 2 - 4 years of experience as a Pipefitter in a shipyard (2nd Class) 1 - 3 years of experience as a Pipefitter in a shipyard. (3rd Class) Other Requirements Must be able to work in various environmental conditions including outdoor weather, heights, confined spaces, loud noise, and exposure to airborne particles or fumes. Must be able to wear a respirator as required for specific tasks and maintain compliance with fit testing and respiratory protection protocols. Regularly required to sit, reach, and use hands for handling or operating tools and equipment. Occasionally required to stoop, bend, squat, crawl, and climb ladders or structures (e.g., masts, tanks, voids). Must be able to lift and move up to 50 lbs. independently and seek assistance for heavier loads. Must be able to pass Drug Screening, Work Ability Screening. Must be able to obtain a Government facility security pass and badges at the various shipyards Tcnico works at (e.g., MHI, BAE, NASSCO, HII). Availability to work overtime, weekends, or travel to alternate worksites when project needs demand. Perform other duties as assigned.

Norfolk, VA Summary: Using brazing and cutting equipment and various power and hand tools, the pipefitter performs a variety of shop and shipboard pipefitter trade functions. These functions include the repair and/or removal of old structural materials; the installation and fit up of new structural materials and complete fabrication of complex fluid system piping and piping hangers and supports. Works under direct supervision and performs related work as required. Duties and Responsibilities include the following: Other duties may be assigned. Apply basic pipefitting and brazing processes to join, fabricate, or repair fluid system piping and associated hangers and supports. Proficient I bending pipe with multiple bends in a single run including 3-dimensional bends. Qualified to braze multiple base metal and filler metal combinations. Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designed. May lay out and mark points on parts or subassemblies using rules, square, scribe or templates. May position pieces be welded or brazed into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools. Knowledge of the processes and procedures necessary for the proper removal of old equipment and piping systems with minimal damage to surrounding materials. Maintain certification in the brazing procedure(s) as required by Quality Assurance Manager. Performs all work in accordance with established safety procedures. Participates in special projects as required. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: High School Diploma or GED, plus technical/vocational training or the equivalent combination. Typically requires 5-10 years of related experience. Experience working in the marine fitter trade gained through a formal apprenticeship or equivalent training is preferred. Thorough knowledge of brazing standards and brazing procedures. Current brazing Certification for Cu and CuNi piping materials. Skill to make acceptable brazes as determined by either peel test or UT test. Read and understand blueprints and specifications. Certificates and Licenses: Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed. Knowledge, Skills and Other Abilities: Ability to follow written and verbal instructions. Advanced knowledge of welding tools and procedures. Knowledge of geometry, weld shrinkage, welding techniques, and physical properties of metal. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is working on a ship. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.

Job Description The Plumbing Service Technicianis key member of our team, performing service work on plumbing systems in commercial and residential environments. Exemplifying our code of values, you show respect and courtesy to all customers and employees. Ideally you have prior experience in the plumbing industry and have proven communication skills with supervisors, employees, and customers. You are self-motivated, thrive in fast moving environments, and able to manage time to effectively meet deadlines. Specific Responsibilities: Install repair and maintain plumbing systems in commercial and residential environments Perform drain cleaning on plumbing systems Perform minor to complex service work on plumbing systems Work with blueprints and job specifications as it applies to the craft Identity proper materials and quantities for new and existing projects Keep company vehicle and equipment properly serviced, clean, and in good working order and condition Job Requirements: Licensed or possessing prior verifiable plumbing experience (minimum 2 years) Valid Driver's License Ability to operate basic hand tools necessary for the craft Attention to detail Excellent communication skills Professional appearance and personality Benefits: Benefits package varies by location We are actively interviewing for this position - Apply today and our hiring manager will follow up!

Who We Are At NPL, part of The Centuri Organization, our employees are part of an established team working to support America's natural gas utility and energy infrastructure. Working at NPL means you are joining a company with over 50 years of experience, long-standing customer relationships, and one that is deeply integrated into our host communities. Come grow your career with us and be a part of something bigger. As an experienced Gas Utility Pipe Fuser/Fitter, you will report to an skilled Foreman, installing, troubleshooting, and maintaining underground gas utlity systems while ensuring safety, efficiency, and top-quality results. We value teamwork, and as part of the crew you will be expected to assist with general labor as needed to support project success. What You'll Do * Construct, install, and maintain piping systems, and equipment for natural gas utilities * Join piping by means of fusion, electrofusion, or mechanical coupled joints * Verify specifications by performing quality assurance tests * Load and unload equipment and materials; keep worksite clean and organized free from unnecessary hazards * Maintain all industry required Operator Qualifications * Perform other tasks as requested by leadership What You'll Have * High School diploma or equivalent * Valid Driver's License * 1+ years prior experience pipe fitting/fusing in gas utility industry What You'll Get * Join the Largest Natural Gas Distribution Contractor in the United States * Weekly Payroll * Paid, on-the-job training: natural gas distribution, utility excavation, safety * Employee Assistance program benefit * Health Insurance Plan benefit * Retirement Plan benefit Work Environment * Work sites are outdoors in potentially extreme weather conditions * All worksite safety instructions are written and spoken in English; must be fluent in English * Work includes prolonged and repeated: lifting (including overhead, up to 50lbs); standing; climbing; kneeling; reaching and feeling; crouching and crawling * Work is performed within the "red zone" of heavy equipment * Working safely requires quick/accurate hand-eye coordination and the ability to work in a constant state of alertness and safe manner Legal Stuff * Pass pre-employment, random, post-accident, and reasonable suspicion drug screens * Provide valid US work authorization documents for E-Verify * Satisfactory results of pre-employment background check results * Valid driver's license with clean driving record * Pre-employment medical fit-for-duty test; hold/obtain DOT medical card * Join and maintain Union membership Diversity, Equity & Inclusion Commitment This job description is subject to change at any time. It reflects management's assignment of essential functions, and does not exclude or restrict the tasks that may be assigned. Centuri and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability, or any other status protected by federal, state or local law. Centuri will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. Centuri is a Department of Transportation regulated employer. Certain safety-sensitive positions are covered under the DOT Drug and Alcohol Testing Regulations, 49 CFR Part 40. It is important to note that marijuana remains a drug listed in Schedule I of the Controlled Substances Act. It remains unacceptable for any safety-sensitive employee subject to drug testing under the company's Drug Free Workplace Policy to use or test positive for marijuana. Nearest Major Market: Hampton Roads

Job Description Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. We are seeking a Pipefitter for a position in Hopewell, VA. The Pipefitter position lays out, fabricates, assembles, installs, and maintains piping and piping systems, fixtures and equipment for steam, hot water, heating, cooling, lubricating, sprinkling and industrial processing systems. Non-exempt role; Reports to the Foreman; Assigned duties according to specific procedures / work is checked frequently. Essential Qualifications: Must have NCCER credentials or be able to pass craft test Must be local candidate 401K immediately vested, benefits after 60 days, holidays after 90 days, vacation after 1 year High school or equivalent One (1) to four (4) years of experience in specified skill (depending on mechanic level) Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.) Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) Applicant/employee must not pose a direct threat to the health or safety of others in the workplace Functional Requirements: Selects size and type of pipe and related material according to job specifications; inspects work sites to determine presence of obstructions and to ascertain that holes will not cause structural weakness; plans sequence of installation to avoid obstructions and activities of other construction workers; cuts, threads and bends pipe; assembles and installs a variety of metal and nonmetal pipe fittings, including those made of brass, copper, lead, glass and plastic; joins pipe by means of threaded, caulked, soldered, brazed, fused or cemented joints; secures pipe to structure with clamps, brackets and hangers; installs and maintains refrigeration and air-conditioning systems including compressors, pumps, meters, pneumatic and hydraulic controls and piping; test piping system for leaks. Compensation Final agreed upon compensation is based upon individual qualifications and experience. Benefits Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: May be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions; handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing / sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; seeing with or without correction; hearing with or without correction; wearing respirator and other PPE; work in excessive heat; work in excessive cold; work in loud environment Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law . Keywords: fitter, pipe installation, fabrication, assembly, aligning, fitting Job Posted by ApplicantPro

We have an exciting new opportunity for a Pipefitter in Hampton! Qualifications: Education and Experience: High school diploma or equivalent. Previous experience as a fitter or in a related field is preferred but not always required, depending on the complexity of the tasks. Technical Skills: Proficient in reading and interpreting technical drawings, blueprints, and specifications. Strong knowledge of hand tools, power tools, and measuring instruments commonly used in fitting tasks. Mechanical Aptitude: Solid understanding of mechanical principles, concepts, and components. Ability to identify and troubleshoot mechanical issues. Precision and Attention to Detail: Excellent precision fitting skills with a strong attention to detail to ensure accurate measurements, alignments, and assembly of components. Problem-Solving Skills: Ability to analyze and solve problems related to fitting and assembly processes. Adaptability to handle unforeseen challenges and adjust techniques as required. Communication Skills: Effective verbal and written communication skills. Ability to work collaboratively and follow instructions accurately. Physical Stamina: Ability to perform physically demanding tasks, such as lifting, bending, and standing for extended periods. Good manual dexterity and hand-eye coordination. Job Duties include but are not limited to: Assembly and Installation: Read and interpret engineering drawings, blueprints, and specifications to assemble and install mechanical components, machinery, and systems according to required measurements and tolerances. Precision Fitting: Utilize hand tools, power tools, and measuring instruments to accurately fit, align, and adjust components to ensure proper functioning and alignment. Material Preparation: Prepare materials by cutting, grinding, drilling, and shaping them as necessary to achieve the desired specifications. Welding and Fabrication: Perform basic welding and fabrication tasks to connect and join metal components as required. Inspection and Testing: Inspect finished assemblies for quality, accuracy, and adherence to specifications. Conduct tests and adjust as needed to ensure optimal performance. Maintenance and Repair: Perform routine maintenance and repair tasks on mechanical systems and equipment to ensure their proper functioning and longevity. Safety Compliance: Follow all safety guidelines, protocols, and procedures to ensure a safe working environment. Use appropriate personal protective equipment (PPE) and follow safe work practices. Documentation: Maintain accurate records of work performed, including measurements, adjustments, and any deviations from specifications. Complete necessary documentation and reports as required. Schedule: Monday-Friday 6am-2:30pm or 7am-3:30pm Pay: $32-$37 per hour based on experience #ISS

Are you a Plumber looking to be part of something BIGGER? A1 Sewer & Drain, a Groundworks Company, offers competitive hourly pay + bonus, employee ownership, and a fast track to leadership positions. We are seeking a talented Plumbing Assistant to join their team in Virgina Beach, VA. Why This Job Rocks: Growth Opportunities: Advance to Foreman in just one year, we promote from within over 80% of the time. Employee Ownership: Become an OWNER in 6 months - we invest in you! We Embrace Meritocracy - your hard work is rewarded. Award-Winning Culture: Join a Best Workplace - our core values are the foundation of our decisions and the essence of who we are. What We Provide: Pay: Competitive hourly pay + bonus Tools & Transportaion: Provided & get a FREE pair of work boots each year! Flexibility: Dispatch from home every day & calls based on your availability Year-Round Work: Full-time, nonseasonal, consistent work. Career Development: Clear career path, certifications & leadership training Benefits: Medical, Dental, Vision, Disability, Life insurance, 401(k) with match, 2 weeks PTO & 6 paid holidays! What We Expect: Contribute to our high-performance team, we WIN together! We work until it's done right. Period. Build open and honest relationships with communication. Embrace & drive growth. Get ready to grow your skills & your career. Deliver quality through great service. Be humble - We all put our boots on the same way. Protect, repair, and improve our customers' greatest asset - their home. What You Can Expect: Travel to a customer's home on a pre-set appointment. Build rapport with homeowners and professionally represent the Company. Exhibit clear communication skills during homeowner interactions. Must be available to work at 7am, and work until manager/dispatcher dismisses you for the day. Some weekend and evenings being on call is required. Installing our products and services under the supervision of trained professionals Installation, Maintenance, and repair of plumbing for both residential/commercial Weekly meeting at the shop. Be a team player who will do whatever it takes to win for you, your team and the organization Ability to listen well and follow instructions closely Ability to grind it out every day knowing that hard work is rewarded What is Required: Residential plumbing service and installation experience for at least 1 year. Loads and delivering materials to work site Performs set up and clean up tasks at the work site Strong finger and manual dexterity for handling pipes and plumbing fixtures. Detail-oriented, organized and proficient. Willing to work in all types of weather. Knowledge of the hazards and safety precautions of the work. Must have basic tools. Valid Driver's license and good driving record. Enters crawl spaces and other confined areas Other duties as assigned by supervisor Physical requirements: Lifting heavy objects, walking and standing for long periods of time and performing strenuous physical labor under adverse field conditions. Pushing, pulling, or carrying objects; bending, stooping, kneeling, and crawling. Requires entry into some tight spaces.

JOB DESCRIPTION SUMMARY/OBJECTIVE The Pipefitter JM2 modifies, installs, and tests Piping Systems on Navy Ships and other Marine Vessels. Ability to read and work off blueprints Ability to accomplish Piping modifications and new installations with little supervision Accomplish all type of testing, hydro and air Experience in bending and threading of pipe Set up all phases of Hot Work Must adhere to a promote ALL company safety policies. Wear all required PPE when in Production areas and promote a clean and safe work environment. Ensure that employees assigned with Firewatch duties are in place and ready prior to begin hot work Fill out Job JSA forms PHYSICAL DEMANDS The Pipefitter JM2 must be able to meet and successfully perform the essential functions of this job. The following physical demands are representative to the position. The position is active and requires extensive standing, walking, sitting, bending, kneeling, stooping, crawling, climbing, and crouching. Along with such movements, employee is required to lift parts/machinery of up to 50 pounds. Additional demands are listed below: Able to climb ladders and work off scaffolding Able to lift, carry, and or push up to 50 lbs. throughout the shift (including overtime) * Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions KNOWLEDGE / SKILLS Must be certified in Silver Brazing Must follow all Safety and Company Policies Ability to accomplish testing of all systems Must have knowledge of various systems including tanks Employee must be able to properly set up brazing/cutting equipment onboard a ship Able to operate various equipment, benders/threaders etc. COMPETENCIES Communication Proficiency Flexibility (Job duties & schedule) Work well with others in all areas where SCW&M is performing work Follow verbal/written instructions Able to work independently Teamwork orientation SUPERVISORY RESPONSIBILTY Pipefitter JM2 position has no supervisory responsibilities. POSITION TYPE / HOURS OF WORK This is a full-time position, 40 hours per week. Schedule is Monday- Friday, 6:00 a.m. to 2:30 p.m. / 2:30 p.m. to 11:00 p.m. (swing shifts dependent on work load). Occasional overtime and weekend work may be required based on production needs. REQUIRED EDUCATION AND EXPERIENCE Must be Silver Braze Certified Must have a minimum of 2-5 years of ship repair experience and qualifications. Must be able to speak and understand Basic English WORK AUTHORIZATION CLEARANCE For E-verify and contract security purposes (including ship access lists), all employees MUST present a valid export document. Acceptable documents are U.S. Birth Certificate, Certificate of Naturalization, Passport, Passport Card and Permanent Resident Card. OTHER Please consider that duties, responsibilities, and all other points specified in this description can change at any time with or without notice.

Venture Dynamics is seeking skilled Pipefitters to join our team. Will be responsible for installing, assembling, fabricating, maintaining, and repairing mechanical piping systems. - Read and interpret blue prints/sketches and install all piping systems with limited supervision. -Perform shop prefab on piping systems using sketches/templates developed from blue prints and ship check. -Rip out, repair, target, layout, fabricate, install and test marine piping systems onboard ships in various stages of repair and modernization -Repair and replacement of ships piping systems such as Auxiliary Salt Water, Fire Main, Potable Water, Hydraulic, Compressed Air, Fuel Oil, Lube Oil, Engine Exhaust etc. are accomplished utilizing work item specifications, NAVSEA/Military standards and marine blueprints -Necessary fabrication abilities include the use of various shop equipment such as table saws, pipe threading machines, bending machines (power as well as hand operated), drill presses and brazing equipment -Tasks associated with this position are the strain free of pumps and miscellaneous ship equipment as well as blanking, pressure testing of tanks (structural boundary testing) and unblinking of the same. - Proficiency in blueprint reading - Mechanical knowledge for pipe system installation - Familiarity with codes and standards related to pipefitting - Ability to plumb pipes accurately - Experience using calipers for precise measurements - Strong understanding of basic math for measurements and calculations. Work will be performed in Riverport NN's and or NOB. Approx. start date: on Jan 5th or Jan 12th. DBIDS in hand or eligible.

Pipefitters are responsible for installing, fitting, and assembling piping systems made of materials such as steel, galvanized, copper, copper-nickel, and stainless steel, in a safe and efficient manner. Work is performed using appropriate tools, valves, and fittings, following technical drawings, blueprints, and specifications to ensure accurate and compliant system installations. 1st Class Mechanics are expected to independently receive assignments, plan the work, identify material requirements, and execute tasks efficiently and accurately. Duties & Responsibilities * Wear required personal protective equipment (PPE) and always adhere to all OSHA safety standards and Técnico safety policies. * Must adhere to all applicable safety, technical, and regulatory guidelines, including but not limited to: * Company policies and procedures * Local, state, and federal regulations * ABS, USCG, NAVSEA Standard Items, and MSC GTRs * ASME/ANSI Codes and OEM Specifications * MIL-STD (e.g., 777E, 22D, 1627) * General Specifications for Overhaul of Ships * Applicable special procedures (e.g., pipe bending (Mil-STD-1627), brazed systems (7000)) * Perform layout, fabrication, installation, modification, testing, and repair of piping systems using various materials (copper, CuNi, CRES, steel, etc.). * Proficient at reading and interpreting blueprints, drawings, and sketches; create fabrication sketches and targets for new installations and mock-ups. * Install systems with or without blueprints, including building mock-ups and off-site prefabrication. * Ability to troubleshoot and resolve issues related to pipe fitting removals and installation. * Prepare pipe joints for welding, brazing, soldering, threading or gluing, ensuring adherence to required tolerances. * Operate pipe bending machines and torches; fabricate and install pipe hangers and supports. * Proficient at performing air, hydrostatic, static and operational tests on piping systems in accordance with safety and quality standards, including 009-71. * Calculate joint allowances, take-offs, and tolerances for butt welds, socket welds, braze and threaded joints. * Must be proficient in performing silver brazing (Grades 3, 4, and 5) and installing various MAF fittings. * Work independently and safely, following all applicable procedures, specifications, and safety regulations. * Must have the ability to use hand tools and instruments associated with the Pipefitting trade including but not limited to, pipe benders, bandsaws, grinders, drills and pipe threaders. Also possess and maintain personal hand tools necessary to accomplish their trade. * Read and interpret Chemist and Competent Person reports to ensure safe conditions for hot work. * Conduct self-inspections to ensure work meets quality standards and complies with applicable drawings and specifications. * Provide guidance and train junior craftsmen, providing direction as a senior mechanic when required. * Maintain a good attendance record, demonstrate a positive and professional attitude, work well with others, take pride in your work, and be receptive to constructive feedback from mentors (supervisor, PMT, etc.). Certification Requirements * Must be certified to braze (Grade 3, Grade 4, and Grade 5) * Certified in LOK-Ring (MAF fittings) Experience Requirements * 4 - 6 years of experience as a Pipefitter in a shipyard. (1st Class) * 2½ - 4 years of experience as a Pipefitter in a shipyard (2nd Class) * 1½ - 3 years of experience as a Pipefitter in a shipyard. (3rd Class) Other Requirements * Must be able to work in various environmental conditions including outdoor weather, heights, confined spaces, loud noise, and exposure to airborne particles or fumes. * Must be able to wear a respirator as required for specific tasks and maintain compliance with fit testing and respiratory protection protocols. * Regularly required to sit, reach, and use hands for handling or operating tools and equipment. * Occasionally required to stoop, bend, squat, crawl, and climb ladders or structures (e.g., masts, tanks, voids). * Must be able to lift and move up to 50 lbs. independently and seek assistance for heavier loads. * Must be able to pass Drug Screening, Work Ability Screening. * Must be able to obtain a Government facility security pass and badges at the various shipyards Técnico works at (e.g., MHI, BAE, NASSCO, HII). * Availability to work overtime, weekends, or travel to alternate worksites when project needs demand. * Perform other duties as assigned.

Turner Industries is a fully diversified industrial contractor. We help move the world forward by providing responsive, innovative solutions designed to increase plant production, reduce costs, reduce downtime, and even prevent shutdowns. Headquartered in Baton Rouge, LA, Turner Industries has over 20,000 employees with offices and job sites across the United States. Our single-solution approach in the petrochemical, refining, energy, pulp and paper, and related industries has made Turner one of the nation's top industrial contractors and earned us the No. 1 spot on ABC's 2024 Top Performers list. People are at the heart of everything we do. Their safety, security, and satisfaction have always been our top priorities. For proof, look no further than our strong working relationships and extraordinary workforce. We are seeking a Pipefitter for a position in Hopewell, VA. The Pipefitter position lays out, fabricates, assembles, installs, and maintains piping and piping systems, fixtures and equipment for steam, hot water, heating, cooling, lubricating, sprinkling and industrial processing systems. Non-exempt role; Reports to the Foreman; Assigned duties according to specific procedures / work is checked frequently. Essential Qualifications: * Must have NCCER credentials or be able to pass craft test * Must be local candidate * 401K immediately vested, benefits after 60 days, holidays after 90 days, vacation after 1 year * High school or equivalent * One (1) to four (4) years of experience in specified skill (depending on mechanic level) * Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.) * Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.) * Applicant/employee must not pose a direct threat to the health or safety of others in the workplace Functional Requirements: Selects size and type of pipe and related material according to job specifications; inspects work sites to determine presence of obstructions and to ascertain that holes will not cause structural weakness; plans sequence of installation to avoid obstructions and activities of other construction workers; cuts, threads and bends pipe; assembles and installs a variety of metal and nonmetal pipe fittings, including those made of brass, copper, lead, glass and plastic; joins pipe by means of threaded, caulked, soldered, brazed, fused or cemented joints; secures pipe to structure with clamps, brackets and hangers; installs and maintains refrigeration and air-conditioning systems including compressors, pumps, meters, pneumatic and hydraulic controls and piping; test piping system for leaks. Compensation Final agreed upon compensation is based upon individual qualifications and experience. Benefits Depending on your employment status, benefits include health, dental, vision, life, ADD, voluntary life / ADD, disability benefits, leaves of absence, 401k, paid time off, paid holidays, telehealth access, and employee assistance program. Physical Involvement: May be required to do the following: climbing ladders, scaffolds, structures, etc. above and below ground level; maintaining balance on ladders, scaffolds, structures, etc.; reaching in all directions; handling and manipulating objects and materials; coordinating the movements of eyes, hands and fingers to operate tools and equipment; lifting 30 to 50 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing / sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; seeing with or without correction; hearing with or without correction; wearing respirator and other PPE; work in excessive heat; work in excessive cold; work in loud environment Turner Industries is an equal employment opportunity employer. All qualified individuals will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, national origin, disability and/or protected veteran status in accordance with governing law. Keywords: fitter, pipe installation, fabrication, assembly, aligning, fitting