Polaris EPC jobs

PBF Energy Inc. (NYSE:PBF) is one of the largest independent refiners in North America, operating through its subsidiaries, oil refineries and related facilities. We are seeking a talented Sr Category Leader to join our team as a pivotal member that would play a key role here at PBF Energy. This role would be located onsite at our Company headquarters in Parsippany, NJ or at one of our refinery locations. The Senior Category Leader - Turnaround and Capital is a critical leadership role within the Procurement organization responsible for developing, implementing, and managing enterprise-level category strategies for high-value activities supporting major turnarounds (TARs), outages, and capital projects across multiple refineries This role owns the full lifecycle of assigned service and materials categories, with an emphasis on opportunity identification, planning, supplier readiness, risk mitigation, stakeholder alignment, execution of strategic initiatives, long-term performance management and cost control in high-pressure, time-sensitive environments. . This position collaborates closely with site leadership, TAR and capital managers, project engineering, and contractors to ensure procurement strategies support safety, schedule, and budget requirements. The Senior Category Leader develops multi-year sourcing plans, negotiates high-value contracts, manages supplier performance, and drives continuous improvement in procurement execution for projects often exceeding $75MM in spend. They serve as a strategic advisor to the business, identifying opportunities for innovation, sustainability, and commercial advantage through deep category expertise and supplier engagement. This role will create multi-year category plans, build and maintain supplier relationships, ensures compliance with internal standards, and drives continuous improvement in value, performance, and risk management. This role requires a strong blend of commercial acumen, strategic thinking, and leadership capabilities. PRINCIPAL RESPONSIBILITIES: * Develop and maintain enterprise-wide category strategies that align with business goals for the assigned spend categories to deliver cost savings, efficiency, and risk mitigation across operations. * Analyze market trends and dynamics, commodity trends, competitor activities and operational demand and activities across multiple refinery and field sites to identify potential savings or pitfalls for Company. * Serve as the primary procurement lead for all turnaround-related sourcing and contracting activities across assigned sites. * Collaborate cross-functionally with key stakeholders, Maintenance, Turnaround and Capital Projects, etc., to align procurement strategies with business needs, develop category strategies and implement new agreements or processes. * Manage the full category lifecycle, including supplier selection, negotiations, contracting, implementation, and performance management. * Lead negotiations and contract development for critical services, including master service agreements, blanket POs, and project-specific scopes to optimize category performance. * Identify and build strategic partnerships with suppliers for ongoing turnaround support. * Monitor contractor performance, enforce KPIs, and lead post-project supplier evaluations and lessons learned * Build a best-in-class procurement playbook for turnarounds and capital projects. * Drive supplier readiness, ensuring materials and labor availability aligns with critical path schedules * Support the development of SAP catalogs, pre-negotiated rate sheets, and Track system updates to streamline TAR procurement * Manage end-to-end contract lifecycle from sourcing to execution and renewal, ensuring compliance with commercial terms, service-level agreements (SLAs), and safety/environmental requirements. * Support supply assurance by proactively identifying risks (e.g., single-source, capacity constraints, geopolitical factors) and developing mitigation plans in coordination with legal and risk teams. * Facilitate cross-site sourcing initiatives and standardization opportunities across refineries and terminals, driving total cost of ownership (TCO) improvements and eliminating non-value-added variation. * Ensure compliance with internal procurement policies, ESG/supplier diversity initiatives, and external regulatory requirements (e.g., OSHA, DOT, EPA). * Evaluate internal stakeholder feedback and implement changes to enhance the category services. * Build strong relationships with strategic suppliers and contractors, driving supplier development, innovation, and value creation while maintaining accountability for safety, quality, and performance. * Conduct thorough market research and benchmarking to create should-cost modeling, market intelligence, benchmarking, and spend analysis to support fact-based negotiations and robust category strategies to ensure vendor competitiveness trends, identify potential issues and provide actionable plans. * Utilize and maintain procurement and analytics tools (e.g., SAP, Power BI, Ariba, or similar) to monitor performance ensuring seamless strategy execution, track savings, and report out on KPIs such as cost avoidance, cycle time, compliance, and supplier performance across the organization. * Stay abreast of industry trends, emerging technologies, and macroeconomic factors (e.g., steel tariffs, inflation, labor shortages) that may impact supply markets and sourcing strategies to provide recommendations to senior management. * Provide input to annual category planning, budget forecasting, and strategic supplier reviews with senior leadership. QUALIFICATIONS: * Bachelor's degree in business, marketing or a related field or equivalent work experience. * Experience in category management within the Oil and Gas market. * 7+ years of progressive experience in strategic sourcing, negotiating, category management, or supply chain experience required * Demonstrated success leading category strategies supporting refinery operations, maintenance, and capital execution. * Deep knowledge of spend categories and contracting models (e.g., unit rate, T&M, lump sum, alliance agreements) for profitability optimization. * Familiarity with contract law, legal terms and conditions, and supplier governance frameworks * Professional Certifications in Supply Chain such as CPSM, CPSD, preferred. * Proven experience with turnaround and capital project lifecycles. * Familiarity with contractor prequalification, jobsite mobilization, and safety requirements * Experience working in a centrally led procurement model with enterprise-wide scope * Strong negotiation skills and commercial acumen with experience developing long-term supplier agreements. * Proven ability to lead cross-functional collaboration across refinery, technical, EH&S, and legal functions. * Experience working in unionized environments and with contractor safety management programs preferred. * Proficient in ERP (e.g., SAP), sourcing platforms (e.g., Ariba, Coupa), S2P systems and data analytics tools. * Knowledge of category management and demand forecasting techniques. * Ability to conduct market research. * Flexibility to adapt to the changing market and organizational priorities. * Excellent communication and negotiation skills to collaborate effectively with cross-functional teams and external stakeholders. * Willingness and ability to travel up to 25% of the time to support operations across multiple facilities in the U.S. * This position is on site 5 days a week * ONLY CANDIDATES MEETING THE ABOVE REQUIREMENTS WILL BE CONSIDERED * FOR SERIOUS CONSIDERATION, PLEASE INCLUDE YOUR SALARY REQUIREMENTS CA Job Posting Requirement: The salary range for this position is $121,160.47- $216,090.75. NJ Job Posting Requirement: The salary range for this position is $121,160.47- $200,749.41. The compensation range listed in this posting is in compliance with applicable state law. Factors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills and internal peer equity will be considered in determining the selected candidate's compensation. Salaries at the time of hire are typically in the lower to middle portion of the above range in order to provide the opportunity to reflect future performance-based increases. In addition to salary, PBF offers a comprehensive benefits package which includes bonus eligibility, health care, retirement benefits, and paid time off. We thank all respondents for their interest in PBF Holding Company LLC ("PBF Energy"), however, only those selected for an interview will be contacted. Please no phone calls or emails to any employee of PBF Energy about this requisition. Placement agencies or recruiters need not respond. All resumes submitted by search firms to any employee of PBF Energy via email, the Internet or in any method without a valid written search agreement will be deemed the sole property of PBF Energy. No fee will be paid in the event the candidate is hired by PBF Energy as a result of the referral or through other means. PBF Energy is an equal opportunity employer. We are committed to creating a diverse, inclusive environment. All qualified applicants will receive consideration for employment without regard to race, color, religious creed, sex, gender, gender identity or expression, sexual orientation, reproductive health decision making, national origin, ancestry, genetic information, physical or mental disability, medical condition, marital status, age, veteran and military status, or any other status protected by applicable law. We are committed to providing reasonable accommodations as required by law. #LI-EG1

Job Description Capable of performing design work as assigned and mentored by a Drafting Manager. Designers are required to have a working knowledge of the components they are designing and are capable of generating detailed drawings within their assigned disciplines. Designers will also delegate work to drafters on assigned projects. ESSENTIAL FUNCTIONS Reasonable Accommodations Statement To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Essential Functions Statement(s) • Perform design duties utilizing company standards and engineering practices. • Computer Aided 3D Modeling on assigned projects utilizing AutoCAD. • Capably of generating different types of "scaled" and "non-scaled" drawings. • Printing, plotting & filing of drawings. • Occasionally travel out of town for short periods of time as required by projects and assignments to gather field data. • Complete high paced assignments through effective prioritization, scheduling, planning and executions of assigned work. • Communicate effectively with a wide diversity of personnel with varying technical backgrounds including engineers, designers, vendors, and management. • Take personal responsibility for the quality and accuracy of your work. • Bring potential project-related problems and possible solutions to the attention of the responsible party. POSITION QUALIFICATIONS Competency Statement(s) • Accountability - Ability to accept responsibility and account for his/her actions. • Accuracy - Ability to perform work accurately and thoroughly. • Communication, Oral - Ability to communicate effectively with others using the spoken word. • Customer Oriented - Ability to take care of the customers' needs while following company procedures. • Detail Oriented - Ability to pay attention to the minute details of a project or task. • Interpersonal - Ability to get along well with a variety of personalities and individuals. • Organized - Possessing the trait of being organized or following a systematic method of performing a task. • Time Management - Ability to utilize the available time to organize and complete work within given deadlines. • Conceptual Thinking - Ability to think in terms of abstract ideas. • Technical Aptitude - Ability to comprehend complex technical topics and specialized information. SKILLS & ABILITIES Education: High School Graduate or General Education Degree (GED), Vocational/Technical “Drafting and Design” 2 year Associates Degree or equal: Required Experience: 10+ years related experience Computer Skills: Operational knowledge of AutoCAD and CADWorx 3D Modeling software. Minimum 1 year experience utilizing Aeries CARS Cable and Raceway Systems database. Working knowledge of Microsoft Office Word, Microsoft Office Excel & Microsoft Office Outlook in a Microsoft Windows environment. Certifications & Licenses: Other Requirements: Equal Opportunity Employer/Veterans/Disabled

Experienced Project Manager proficient managing multi-discipline engineering and design projects with engineering budgets of $50,000 to $5,000,000 in the Oil and Gas Industries, CO2 Capture and Transportation Industry, or Chemical Industry. As a Senior Project Manager, you will be required to plan, execute, monitor, and control all aspect of the project. Directly interface with multiple clients and lead project engineering and design teams. Manage interdisciplinary communication and coordination. Technical background with the ability to understand and evaluate the technical content of design drawings. Develop and strengthen relationships with clients. POSITION REQUIREMENTS: The Senior Project Manager should be able to perform the following: Planning • Meet with proposal manager and ensures full understanding of stakeholder expectations, scope of work, deliverables, budget, schedule, and quality requirements • Set up initial kickoff meeting with client and obtains alignment of project goals, communication requirements, deliverables, budget, schedule, and quality requirements • Coordinate formation of the project team with department heads, including assignment of PE of record for each discipline • Prepare detailed scope of work, design basis, schedule and validate with engineering and design teams • Ensure engineering design leads develop execution plans and update the project controls systems. Validates execution plans. Executing • Provides team leadership and high-level review of technical execution • On small projects perform engineering or project engineering task • Lead weekly status review and design meetings to: • Ensure interdisciplinary communication and coordination • Review status of task, deliverables, quality, and quality processes • Review and Update Scope, Schedule, Budget, and Forecast • Monitor and control change • Lead management of change and issue change orders to client • Ensure execution plans are updated when approval of change in scope, schedule, quality, or deliverables is received • Maintain the appropriate level of client communication: phone calls, emails, status meetings, status reports, in person meetings, and team reviews, etc. • Track Project Progress and issue Progress Reports to client weekly. • Maintain the appropriate level of communication with Management • Ensure project team follows company policies and procedures • Perform lessons learned on each project during project execution phase • Mentor engineers and designers. SKILLS & ABILITIES: Education: Bachelor's Degree (four year college or technical school): Required Experience: 10+ years Computer Skills: Certifications & Licenses: Must have engineering or drafting/design experience. Other Requirements: Equal Opportunity Employer/Veterans/Disabled

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position will repair and maintain pipelines, equipment, and performance of work associated with the operation and maintenance of gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Inspect, maintain, and operate facilities including pipelines, valves, filters, pumps, gas compressors, storage tanks, and pump station equipment in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Conduct Damage Prevention activities including pipeline patrols, one-calls, locating and marking pipelines, and inspecting line crossings, excavations, and other activities affecting the pipeline * Maintain working knowledge of regulatory requirements, perform required tasks, and complete associated documentation (OSHA, DOT, EPA, etc.) * Plan, organize, and prioritize assigned responsibilities and coordinate work with employees and contractors * Coordinate and communicate with outside parties including landowners, public agencies, contractors, utilities, and other pipeline operators * Actively participate and provide leadership in safety programs and initiatives and follow policies and procedures * Provide on-call support for areas of responsibility on a rotating basis * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) * Position must reside within 45 minutes of the Finney office Required Education: * High school diploma or GED preferred. Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Valid driver's license with demonstrated safe driving record * Excellent organizational skills * Excellent written and verbal communication skills with the ability to work effectively in a group environment * Demonstrated self-starter with the ability to work independently and exercise good judgement Preferred Qualifications: * Mechanical aptitude with ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment * Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer based work training, time reporting, expense reporting, and on-line work applications and documentation Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment * Frequent heavy lifting with and without assistance * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Reliable attendance at work * Occasional overnight travel may be required

VersaTech is an Automation company with over 700 people and $100M+ in annual sales. VersaTech offers Instrumentation and Electrical services to the oil and gas market including construction, maintenance, commissioning and loop checking. VersaTech has offices in Houston, Dilley, Midland, New Orleans, Africa, and Dubai. Our scope of work includes both onshore and offshore projects in the US and overseas. VersaTech has an opening for Class A Lineman. The primary function of this position is to safely perform skilled electrical line work in the construction, operation, maintenance, and repair of the overhead electrical distribution system. Primary Responsibilities: Works safely on construction, maintenance or repair work on energized and de-energized overhead work. Set poles, anchors, install transformers, lightning arrestors, cutouts, cross-arms, insulators, switches, and switchgear. Operate digger truck and bucket truck of various sizes and models Troubleshoot primary and secondary systems Medium to high voltage experience (480,4160 and above) Cable of installing and removing proper cover-up Grounding Operate overhead buckets on electric distribution systems to set transformers plus pulling primary and secondary conductors Will assist and perform other duties as assigned when not performing lineman work Assist electrical crews Operate equipment as needed

Qualifications * Bachelors degree in an engineering discipline or commensurate industrial experience. * Ability to work independently once given a task. * Proven well developed teamwork and collaboration skills including strong verbal and written communication, presentation, and team facilitation. * Must be well versed in technical writing and verbal communication. * Must possess excellent interpersonal skills to build positive relationships and handle conflict resolution. * Has the ability to develop solutions to resolve account problems * Excellent analytical, planning and organization skills. * Must have the ability to prioritize to meet multiple deadlines HPC is an equal opportunity employer. * HPC Responsibilities * Works 100% safely in all aspects. * Travel with the chemical cleaning groups to participate in as many projects as possible, this will accelerate the learning experience. * Develop a relationship with key stakeholders across the company. * Be available for 70% travel during the learning phase. * Effectively communicate with leadership and crews. * Perform basic math and chemistry calculations. * Takes initiative throughout the learning phase by actively searching for answers. * Performs other duties as assigned.

HPC-Industrial, powered by Clean Harbors, in Donaldsonville, LA is looking for an LDAR Utility Technician to join their safety conscious team in Louisiana! The LDAR Utility Technician is responsible for using an analyzer & electronic data recorder, is responsible for accurately monitoring components on an assigned route with an industrial facility. You are also responsible for calibrating equipment to ensure optimum performance of the analyzer, as well as identifying leaks & processing leak tags. Ensures compliance with all Company policies/procedures and maintains/improves good customer relations by providing quality, timely industrial cleaning services. Transitioning Military, this is a great opportunity to leverage your skills and training as you return to civilian life. WORKING ENVIRONMENT: Industrial setting - Refinery, Petro-Chemical, Utilities, Pulp and Paper Mills, etc. Why work for HPC-Industrial? Health and Safety is our #1 priority and we live it 3-6-5! Competitive wages Comprehensive health benefits coverage after 30 days of full-time employment Group 401K with company matching component Opportunities for growth and development for all the stages of your career Generous paid time off, company paid training and tuition reimbursement Positive and safe work environments Work Schedule: Monday-Thursday 4/10s

Constructs and or repairs metal products either manually or by machine II. RESPONSIBILITIES: Welds a range of metals including but not limited to mild steel, stainless steel, cast iron, aluminum, copper, brass, die cast, chrome metal. Aware of safety regulations and must wear protective equipment to minimize heat and noise levels, and to guard against corrosive chemicals. Ability to read Blueprints and weld maps preferred. Ability to have all welds pass with QA/QC approval. Proper placement of stencils. Ability to follow all the Fabrication guidelines. III. MINIMUM QUALIFICATIONS: Pass a Weld Qualification Test Provide your own personal tool in a lockable toolbox Available for short - term travel IV. REPORTING REQUIREMENTS: High School Education or equivalent Possess a valid driver's license V. PHYSICAL REQUIREMENTS: Ability to lift, carry or otherwise move and position objects and materials weighing up to 50 lbs. Ability to stand, walk or otherwise move around on a continuous basis.

The Environmental Compliance Manager manages day to day regulatory functions at Clean Harbors and Safety-Kleen operating facilities. Why work for Clean Harbors? Health and Safety is our #1 priority and we live it 3-6-5! Competitive wages Comprehensive health benefits coverage after 30 days of full-time employment Group 401K/RRSP with company matching component Opportunities for growth and development for all the stages of your career Generous paid time off, company paid training and tuition reimbursement Positive and safe work environments Responsibilities Conducts formal and systematic reviews of the facility to ensure compliance with federal, state, and local regulations for environmental affairs and health and safety. Identifies problems and recommends corrections; prioritizes and follows-up on corrections regarding areas of non-compliance or potential non-compliance. Advises corporate and facility management regarding procedural and operational measures to be taken to correct or minimize non-compliant activities regarding environmental regulations. Applies for environmental permits and maintains a schedule for renewals, reporting, and provisions of all environmentally related permits. Prepares and maintains environmentally related plans and procedures for facilities. Prepares reports and documents as required by regulatory agencies and corporate and facility management. Prepares and provides environmental related training. Serves as liaison between facilities and outside contractors, and regulatory personnel on all environmentally related projects and activities. Coordinates and accompanies regulatory personnel during all facility inspections. Coordinates environmental audits of facilities by customers. Acts as a liaison with Agency regulators and negotiates for terms favorable to the organization regarding legal agreements, permit conditions, and proposed regulations. Responds to significant accidents, incidents, and complaints and provides guidance to operational teams. Prepares and submits all required notifications/reports and participates in management team investigations as needed. Monitors regulatory changes for the purpose of insuring compliance with upcoming changes in federal, state and local rules and regulations. Provides guidance to sales, field personnel, and customers concerning federal, state and local environmental regulations. Performs audits of external facilities to ensure they are properly permitted for use and operating in compliance. Performs other duties and tasks as assigned from time to time by management and will be required by the needs of the Clean Harbors business. Routine travel to facilities. Qualifications BS/BA (preferred) BS/BA in Environmental Science or Engineering (preferred) 2+ Year Environmental compliance experience (required) Knowledge of and Environmental Protection Agency (EPA) laws/regulations (required) RCRA 40 CFR hazardous waste management knowledge (required) Excellent communication, writing and presentation skills Excellent organizational skills Join our team today! To learn more about our company, and to apply online for this exciting opportunity, visit us at **************************** Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is one-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology - come be part of the solution with us. We thank all those interested in joining the Clean Harbors team; however only those that complete the online application and meet the minimum job qualifications will be considered for this role. Clean Harbors is a Military & Veteran friendly company. #CH #LI-NM2

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Responsibilities: As a Mechanical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team. You will also gain knowledge of various aspects of a refinery by working with a team of professionals who run a specific portion of the refining process. Most often, Mechanical Engineers will have an opportunity to work on more than one area of the refinery, leading to a broad understanding of how the plant operates. Finally, you will have the opportunity to expand your written and verbal presentation skills in a professional work environment. The majority of Mechanical Engineering co-ops and interns enter into the following positions: Area Refining Engineer/Project Engineers develop and use project management skills to create project scopes, estimates, and schedules. Once a project is developed and approved, you, as the project manager, will oversee the design effort and assist in the construction process. MPC will provide training and educational opportunities to help you develop your knowledge of other engineering disciplines. We are committed to developing engineers into professional project managers who can successfully manage projects of all sizes. Reliability Engineers support the refinery's Maintenance Department through design and development of equipment related improvements. Such improvements include root cause failure analysis, optimization of maintenance programs in rotating equipment (pumps, compressors, etc.), and troubleshooting fixed equipment (refinery pressure vessels, heat exchangers, piping systems, etc.). Reliability Engineers will also be continuously challenged to find new technology in design, materials and repair methods to achieve refinery goals of longer running times at lower costs. Qualifications: + Candidates must be majoring in Mechanical Engineering + Strong academic performance + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Positions are available spring, summer, and fall semesters + Availability for multiple work terms is preferred + A valid driver's license is required + Concurrent enrollment in a degree seeking program + Military experience a plus + MIN - $32.31 per hour / MAX - $40.89 per hour Learn more about Marathon Petroleum's benefits at ********************* As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00018186 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Anacortes, Washington, Canton, Ohio, Catlettsburg, Kentucky, Detroit, Michigan, El Paso, Texas, Garyville, Louisiana, Kenai, Alaska, Mandan, North Dakota, Martinez CA Refinery, Robinson, Illinois, Salt Lake City, Utah, St Paul Park, Minnesota, Texas City, Texas, Wilmington, California Education: High School (Required) Employee Group: Full time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.

Field Services Courier 1.0 Corporate Job Title Field Services Courier 2.0 Reporting Relationships Operations Manager Pick-up, transport and deliver samples, equipment, supplies, documents and other work related items as per the direction of designated Operations personnel. Perform these tasks while acting in a professional and dignified manner so as to maintain the Company's respected and trusted reputation. 4.0 Minimum Requirements • Requires a H.S. Degree (or equivalent). • Must have a valid motor vehicle driver's license. • Must have a maintained and insured personal vehicle, unless a Company use vehicle is provided. • Must be dependable and be able to work independently with minimal supervision. Must be able to effectively communicate and maintain a professional appearance. 5.0 Fitness for Duty - Physical Demands • Refer to Appendix 1 of Section 2.1.2a of the Safety Manual, Medical Evaluations for details on Fit for Duty - Physical Demands for this position. • The ability to perform all tasks listed is a requirement for this job description 6.0 Responsibilities • Maintain regular contact with Operations Department in order to receive work orders and schedules. • Possess and maintain a vehicle in order to perform duties in a timely manner. • Operate vehicle in a safe manner.

Installation of pneumatic and hydraulic systems, emergency shutdown systems and equipment under minimal supervision. Layout, measure, fabricate and install tubing tray. Layout, measure, bend, cut, thread, ream and fit hard pipe systems. Install single line and group tubing and fittings. Able to layout and install pneumatic and hydraulic panels and end devices. Demolition of tubing and end devices. Knowledge of industry and American Petroleum Institute standards. Able to read relevant construction drawings. Knowledge of pneumatic and hydraulic control logic. Proficient in the use of tools of the trade. Able to recognize and avoid safety hazards and dangers All above functions performed with minimal supervision.

Want to run million-dollar projects before most people your age aren't even managing a small crew? Ready to see new cities, meet new people, and build things that last for decades? We're looking for ambitious, adaptable, and travel-ready superintendents who want more than just a job-they want a career adventure . Why You'll Love It · See the country - Spend 10-12 weeks at a time on-site in different cities. · Earn more - Competitive salary, per diem, and you keep your airline miles & hotel points. · Stay connected - Paid trips home during long projects, plus tech stipends to keep you connected with friends & family. · Team you can count on - You won't be “sent out”-you'll be backed by a team that's been where you are and wants you to succeed. This position is responsible for the entire construction project from mobilization to completion by providing skills and knowledge to run the day-to-day operations of retail/commercial renovation job site(s). Why Powerhouse: · Comprehensive benefits plan with multiple plan options for medical and dental. · Vision, HSA, Voluntary Life, FSA, Dependent Care and additional voluntary benefits · Company paid long term disability and life insurance. · 11 Paid company holidays (depending on work schedule). · Accrue up to 4 Weeks Paid Time Off per Calendar Year · 401(k) plan What YOU will do: · Studies Project Manual, job specifications and construction drawings to ensure timely start and finish, safety, quality of work and subcontractor performance for each phase of construction. · Ability to understand the scope of work, evaluate and recommend means and methods typical with industry standards, estimate the time involved, and take initiative with fundamental scheduling changes to minimize cost and time. · Manage and work alongside construction crews in the installation and/or repair of concrete, asphalt paving, structural steel, cabinetry, countertops, flooring, electrical, painting, plumbing, HVAC, and other construction tasks as needed in a live retail environment. · Must be present on the jobsite as defined by program expectations. · Ensure blueprints and plans are followed precisely. Evaluate risks that impact successful delivery of blueprint intent but may not be obtainable. · Provide Daily reporting on project status with photos through project management applications as needed. Accurately detail completion and certification of projects. · Successfully coordinate and facilitate the RFI process. · Interface with local permitting authorities to ensure compliance and successfully coordinate required inspections including permit closeout. · Ability to pass a drug screen and background check. · Ability to operate equipment such as Forklifts and Scissor Lifts · Willing to travel a minimum of 14 weeks at a time across the U.S or as determined by the Project Manager. · Must be willing to travel by air. · Night and weekend work is required. · Responsible for final handoff confirming all tasks are complete and correct. · Hands on work for 20% of the time. (Examples: installing a paper towel holder or hardware) Supervisory Responsibilities: · Plans and organizes tasks for project field staff and subcontractors. · Maintains project schedule and minimizes delays. · Examines work for exactness and accuracy. · Ensure safety protocols are always followed. · Organizes and participates in weekly toolbox talks. What YOU bring: · Hungry to learn and lead in the construction industry. · Comfortable traveling and adapting to new environments. · Motivated by big challenges. · Three (3) years of experience in a supervisory role and Five (5) years' experience in a relevant trade. · Proficient in Microsoft Office Applications for reporting purposes. Experience with ProCore, PlanGrid, Autodesk Build is a plus. · Must pass an MVR, background, and drug test. This is the role that builds leaders . If you're ready to accelerate your career while exploring the country and making a tangible mark on the world, let's talk. Equal Opportunity Employer/Disability/Veterans

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

Assist the Project Manager with multi-discipline engineering and design projects with engineering budgets of $50,000 to $5,000,000 in the Oil and Gas Industries, CO2 Capture and Transportation Industry, or Chemical Industry. Assist the Project Manager with planning, executing, monitoring, and controlling all aspects of the project. Direct interface with lead project engineering and design teams. Manage interdisciplinary communication and coordination. Technical background with the ability to understand and evaluate the technical content of design drawings. Develop and strengthen relationships with clients. POSITION Requirements Planning: Meet with proposal manager and ensure full understanding of stakeholder expectations, scope of work, deliverables, budget, schedule, and quality requirements Set up initial kickoff meeting with client and obtains alignment of project goals, communication requirements, deliverables, budget, schedule, and quality requirements Coordinate formation of the project team with department heads, including assignment of PE of record for each discipline Prepare detailed scope of work, design basis, schedule and validate with engineering and design teams Ensure engineering design leads develop execution plans and update the project controls systems. Validates execution plans. Executing: Provides team leadership and high-level review of technical execution Lead weekly status review and design meetings to: Ensure interdisciplinary communication and coordination Review status of task, deliverables, quality, and quality processes Review and Update Scope, Schedule, Budget, and Forecast Monitor and control change Lead management of change and issue change orders to client Ensure execution plans are updated when approval of change in scope, schedule, quality, or deliverables is received Maintain the appropriate level of client communication: phone calls, emails, status meetings, status reports, in person meetings, and team reviews, etc. Track Project Progress and issue Progress Reports to client weekly. Maintain the appropriate level of communication with Management Ensure project team follows company policies and procedures Perform lessons learned on each project during project execution phase Mentor engineers and designers. Other Requirements: Good Written Communication and Oral Skills, Detail Oriented, Dependable, Technical Aptitude, Good Organizational Skills, Quick Learner, Self-Learner, Good Integrity, Good collaboration skills Education: 4-year engineering degree or equivalent combination of education and experience required Experience: 2-6 years related experience in design engineering or construction engineering Computer Skills: MS Office Suite (MS Work, MS Excel, etc), Bluebeam / Adobe, MS Windows Certifications & Licenses: NA Equal Opportunity Employer / Veterans / Disabled

The Field Specialist position is a very demanding, hands-on job that makes the use of the latest technologies to deliver effective tubular running solutions to Weatherford's clients. This technology requires a skilled workforce that can be trained to deliver high service quality with no oversights. To achieve this the Field Specialist, need to be detailed focused, process driven, and dedicated to always following the Weatherford's processes and procedures. Entry and intermediate level roles will receive direct supervision in support of their duties and assignments. Senior level roles will not only provide direction to junior levels but may also be required to use their extensive knowledge and experience to troubleshoot or resolve complex technical issues and make recommendations to improve operational performance. Field Specialist main responsibility will be to aid the Rig Systems Specialist before, during, and after all tubular running operations with any duties needed to complete the operation. This includes helping RSS testing of necessary equipment before the start of the job, checking equipment inventory, and providing feedback to Shorebase if needed. Depending on the level of knowledge and experience, the Field Specialist roles may change during the operation depending on the needs of the client. After the operation, the Field Specialist may be required to perform post job maintenance or prepackaging planning for transiting equipment back to Shorebase. SAFETY, SECURITY & COMPLIANCE Maintains the highest standards of corporate governance, ensuring that all activities are carried out ethically and in compliance with Company's Security, Compliance & HSE policies, Management System, relevant laws, regulations, standards, and industry practices and complies with the Company's Rules to Live By Places Quality, Health & Safety, Security and Protection of the Environment as core values while never intentionally placing employees, our processes, customers, or the communities in which we live and work at risk Seeks continual improvement in Health, Safety, Security & Protection of the Environment, considering responsible care, process vulnerabilities, public, customer and employee inputs, knowledge and technology and best business practices to exceed customer expectations Maintain any annual training certifications sole responsibly Maintain good standings with the Weatherford sanctioned driver's policy QUALITY Maintains service quality as an immediate priority when working across all areas of the business and continually seeks areas for improvement Responsible for being familiar with the Company's Quality policies and taking an active role in the compliance and improvement of Weatherford's Management System Demonstrates knowledge and understanding of all policies & procedures, related operational & non-operational documentation, supports systems, complies with all Technical Work Instructions and Test Procedures, carrying out work OPERATIONAL REQUIREMENTS Be available 24 hours a day and must return all phone calls from the Customer Service Team within 2 hours of the first call. Failure to do so twice per quarter will result in disciplinary action in accordance with HR guidelines. Use Weatherford email as the primary source of communication and must check emails every 24 hours and respond if necessary. Remain current on ALL specific safety training. Expired safety training will result in the loss of work and disciplinary action in accordance with HR guidelines. Maintain professional manner and appearance in Weatherford apparel when at and traveling to and from client location Provide the Customer Service Team with all necessary documentation needed by the client within 4 hours of the request. Failure to do so will result in loss of work and possible disciplinary action in accordance with HR guidelines. Provide all necessary information when using 3rd party transportation to and from client locations. Must adhere to Weatherford's Travel, Meals, and Entertainment Business Practice when traveling Understand and adhere to all of the Weatherford TRS Zero Tolerance Rules and Critical Rules to Work By Participate in the building/designing of Job Hazard Analysis with RSS for upcoming operations Test, operate, and maintain all Weatherford TRS equipment either at the R&M facility or at client locations Deliver superior Service Quality to the client by always following Weatherford's Operational Control Plan - Service Execution Provide accurate incident reports with detailed accounts of equipment failures within 24 hours back to shore base to facilitate speedy resolutions to the customer Ensure contact is made to shore base either directly or indirectly following an NPT event within 30 minutes. Where the roles are required, oversee, and provide leadership and mentorship to lower Field Specialist. When necessary, conduct operations on a project without a Rig Systems Specialist on location When necessary, provide support to operations at the R&M facility to meet the needs of the client Provide operations with technical knowledge to help meet the needs of current or future jobs Perform installation of complex or nonstandard equipment at client locations Must be assessed competent in all assigned operational competencies in the Weatherford Competence Assurance Process (WCAP) program. Maintain and have readily available at all times the Weatherford supplied laptop with up-to-date Technical Work Instructions Assist RSS in providing accurate and complete Job reports back to operations in a timely manner PEOPLE & DEVELOPMENT Employees should regularly engage with their line manager to discuss their performance, objectives, and opportunities to enhance their skills and experience to support their career potential as outlined in Nextgen: Tubular Running Services Field Specialist Career Path Develop positive relationships with clients to ensure excellent customer satisfaction Always represent Weatherford by maintaining a positive attitude and professional demeaner while interacting with Clients Fundamentals of Mechanics, Electricity, Electronics, Pneumatics, and/or Hydraulics REQUIRED 2+ years tubular running services experience 2+ or more years related experience in the Oil and Gas industry Demonstrate a good mechanical aptitude and a desire to learn Have effective computer skills with competence in basic Microsoft Office programs High School diploma (or Secondary School Diploma or equivalent) as minimum. General product knowledge Mechanical ability necessary to perform repairs and troubleshooting issues on equipment Valid Driver license Have a current Transportation Worker Identification Credential (TWIC) or the ability to obtain 2 years College degree - Preferred SKILLS Basic Mathematics Skills Computer fundamentals Self-starter and self-motivator Critical thinking for complex problem solving Active listener & learner Good reading and writing skills Strong judgment, and decision-making to be in line with policies & procedures Time management Quality Control Analysis to ensure the product meets required standards Service Orientation ABILITIES Physically capable of undertaking the tasks required to perform the role Information & task ordering & ability to identify when a problem may occur and, where possible, to understand the solution Ability to react effectively and efficiently in operating tools and machinery Ability to imagine how tools and products will look when preparing for assembly, repair, or modifications Travel Requirement: This role may require domestic and potentially international travel of up to: 100%

Job Description Conhagen is seeking an Intermediate Manual Machinist for our Kenner, LA location. The ideal candidate should possess at least 3-5 years of machining experience. The Manual Machinist will perform machining operations on pumps, turbines, and other equipment components in the Conhagen machine shop as directed. Requirements: • 3-5 years of manual machining experience • Familiarity with interpreting blueprints • Knowledge of HSE procedures and machining principles • Proficiency in using measuring equipment • Skills in various machining operations About Us: • Climate-controlled shop with safety gear provided • On-the-job training and mentorship • Tuition and certification reimbursement • Employee perks, including fitness expenses reimbursement, boot reimbursement program, and more. Job Responsibilities: • Fabricate parts from blueprints using various materials • Use precision measuring tools • Inspect machinery and adjust as needed • Operate transportation machinery • Ensure compliance with safety regulations • Distribute work and manage the department in the absence of the supervisor Requirements: • Adequate English language skills • Authorization to work in the U.S. • Background check and drug screening required • Minimum two-year background in manual machining • Proficiency in various machining tools • Leadership capacity or experience • History of safety compliance Working Conditions: • Machining shop environment with moderate noise • Use of specified safety gear • Potential for overtime • Flexibility to changes in work orders and schedules • Equal opportunity employer

Employee Type: Regular-Full time Union/Non: Are you a person who can do many different types of work? At Enbridge, the Electrical Controls Technician II is tasked with a variety of duties, including repair, installation, diagnosing, maintenance and corrective tasks on electronic, pneumatic and/or mechanical control systems, devices, and ancillary equipment. Are you interested? Apply today!! What you will do: Electrical, Instrumentation & Controls: Maintain electrical systems and equipment (such as switchgear, motors, generators, pumps and fans). Maintain DC electrical systems and equipment (such as batteries, chargers, rectifiers and inverters). Maintain station and unit level electrical control systems and their components (such as PLCs, HMIs and control networks). Maintain station and unit level electrical control system end devices (such as motor controls, pressure transmitters, pressure switches, temperature sensors, limit switches, solenoids and actuators). Maintain safety systems and their components (such as ESD panels, gas detectors, flame detectors and manual activation switches). Direct other qualified employees in the performance of routine electrical controls-related activities. Assist in planning work and giving budget related information as required, consistent with the annual budgeting process. Responsible to work within Company's low voltage electrical safety work practices. Perform emergency repairs. Measurement Function: Independently operate, calibrate and maintain gas chromatograph equipment and flow meters. Calibrate, maintain and troubleshoot transmitters, analyzers. Conduct ultrasonic metering inspections. Use of flow computer systems to view data, alarms, and perform transmitter calibrations. General: Provide Operation, Maintenance, and Troubleshooting of Turbine/Compressor package unit, which including start, stop, load adjustment, alarm & operation variables monitoring, and initial response as required. Operate and maintain assigned compressor station (if applicable), pipeline and right-of-way as well as mainline block valve sites, including surrounding grounds. Perform work in compliance with Company policies/procedures as well as external regulatory bodies, such as the Pipeline & Hazardous Materials Administration (PHMSA) and Environmental Protection Agency (EPA) through adherence to NFPA 70 National Electrical Code (NEC), Standard Operating Procedures (SOPs) and Operation and Maintenance (O&M) Manuals. Responsible for recognition and reporting of abnormal and safety related operating conditions including accident and near miss reporting as well as emergency response involvement at all levels. Safe work permitting and contract management during maintenance activities. Manage of workflow Maximo which includes identifying, planning, procurement of parts and warehouse issue, securing contract services as required, execution of tasks, completion of work orders and purchase orders as required. Planning of area maintenance schedules, work backlog management, budget control, involvement in environment, safety and technical optimization initiatives and teams as well as the individual management of all required training, including regulatory and technical. Smaller project duties can also include gathering of all vital information and costs associated with estimating a project, Work Based Structure (WBS) and work order preparation, selection of contractor, ensuring permitting is acquired as vital and final completion of project and all associated reports. Also ensuring that all work is done according to company and regulatory procedures. Follow and adhere to Company business and operational processes, procedures and practices. Cultivate high standards of Health, Safety, Security and Environmental stewardship. Model safe behavior based on safety principles. Who you are: You have: High School Diploma and typically 2+ years of directly relevant training and experience. Enrolled in a two-year technical school program or apprenticeship program at the 2nd, 3rd or 4th level. Completion of Certified Trades or technical school program and has not achieved the Fully Qualified level for Enbridge specific technical or behavioral competencies. Excellent analytical and troubleshooting skills. Demonstrated effective written & verbal communication skills. You are: Competent using equipment applicable to the maintenance of control systems. Highly motivated with interpersonal skills to effectively work in a collaborative team environment that includes shared responsibilities, establishing and maintaining effective working relationships with others, support team and company objectives, and a willingness to work in all areas required by the team. Fully competent and current with all Health, Safety and Environment standards and training Proficiency using a computer (i.e., Microsoft Office products). Familiar with Emergency Response Planning. Preferred Experience: 5+ years of experience in the Oil and Gas industry, specifically operations with high pressure gas transmission and inspections and/or commissioning preferred. Experience and knowledge of gas measurement, analyzers, meters, and compressor station operations would be an asset. Previous experience with PLC's and SCADA systems will be an asset. Working Conditions: Willing to work overtime, weekends, shift, be on call and standby, and travel overnight as required. Physical Requirements include but are not limited to: Balancing, bending and stooping, climbing, crawling, carrying (up to 25 pounds), grasping, kneeling, lifting (objects up to 25 pounds), pulling hand over hand, pushing, reaching above shoulder, repetitive motion, sitting, standing, walking, visual requirement (able to see screens, detect color coding, read fine print), hearing requirement. Mental Requirements include but are not limited to: Ability to understand, remember and apply oral and/or written instructions or other information, understand complex problems and collaborate/explore alternative solutions, organize thoughts and ideas into understandable terminology, organize and prioritize work schedule on a short-term basis, make decisions which have moderate impact on the immediate work unit and monitor impact outside this area, understand and follow basic instructions and guidelines, complete routine forms, compose letters, outlines, memoranda and basic reports and communicate with individuals via telephone. International relocation assistance is not offered for this role. At Enbridge, we are dedicated to our core value of Inclusion. We are proud to be an Equal Opportunity Employer. We are committed to providing employment opportunities to all qualified individuals, without regard to age, race, color, national or ethnic origin, religion, sex, sexual orientation, gender identity or expression, marital status, family status, veteran status, Indigenous status, disability, or any other reason protected by federal, state, or local law. Applicants with disabilities can request accessible formats, communication supports, or other accessibility assistance by contacting ********************. Information For Applicants: Applications can be submitted via our online recruiting system only. We appreciate your interest in working with us; however, only those applicants selected for interviews will be contacted. Final candidates for this position may be required to undergo a security screening, including a criminal records check. To learn more about us, visit ****************

An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Responsibilities: As an Electrical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team. You will also gain knowledge of various aspects of a refinery by working with a team of professionals who run a specific portion of the refining process. Most often, Electrical Engineers will have an opportunity to work on more than one area of the refinery, leading to a broad understanding of how the plant operates. Finally, you will have the opportunity to expand your written and verbal presentation skills in a professional work environment. The majority of Electrical Engineering co-ops and interns enter into the following positions: Electrical & Instrumentation (E&I) Project Engineers work on a variety of real-world electrical and instrumentation projects in a refinery setting. During your time at MPC, you will develop and utilize project management skills including scope alignment, cost and schedule development, and teamwork through multiple engineering phases. You will also support the area teams. We are committed to developing engineers into professional project managers who successfully manage projects of all sizes. Reliability Electrical & Instrumentation (E&I) Engineers troubleshoot Electrical & Instrumentation issues at the refinery. As a reliability intern, you will help analyze failures of equipment, develop solutions for recurring equipment difficulties, submit Project Request Forms (PRF's) to implement solutions, and understand equipment maintenance strategies. There will be opportunities to use electrical analysis software to solve coordination issues and run Arc Flash studies for the power system, as well as learning and understanding about how our critical Refinery Safety Instrumented Systems (SIS) are applied. Process Control / Technical Service Engineers can work on a wide array of projects in support of the process control systems installed throughout the refinery and products movements areas. The process control systems in the refinery provide real-time control and data acquisition functions in support of operating the refinery process and electrical equipment. Typical college co-op assignments include the following: troubleshooting system power supply problems, control system programming, hardware and software lifecycle replacement projects, installing and troubleshooting communication networks and monitoring control system performance metrics. Qualifications: + Candidates must be majoring in Electrical Engineering + Strong academic performance + Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. + Positions are available spring, summer, and fall semesters + Availability for multiple work terms is preferred + A valid driver's license is required + Concurrent enrollment in a degree seeking program + Military experience a plus + MIN - $32.31 per hour / MAX - $40.89 per hour Learn more about Marathon Petroleum's benefits at ********************* As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00018188 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Anacortes, Washington, Canton, Ohio, Catlettsburg, Kentucky, Detroit, Michigan, El Paso, Texas, Garyville, Louisiana, Kenai, Alaska, Mandan, North Dakota, Martinez, California, Robinson, Illinois, Salt Lake City, Utah, St Paul Park, Minnesota, Texas City, Texas, Wilmington, California Education: High School (Required) Employee Group: Part time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here (*********************************************************************************************************************************** . If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at *************************************** . Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role. About Marathon Petroleum Corporation Marathon Petroleum Corporation (MPC) is a leading, integrated, downstream energy company headquartered in Findlay, Ohio. The company operates the nation's largest refining system. MPC's marketing system includes branded locations across the United States, including Marathon brand retail outlets. MPC also owns the general partner and majority limited partner interest in MPLX LP, a midstream company that owns and operates gathering, processing, and fractionation assets, as well as crude oil and light product transportation and logistics infrastructure.