Packaging Engineer jobs at Post Holdings - 2191 jobs

We're Hiring: Manufacturing Production/Project Engineer | Emporia, KS Are you a hands-on engineer who thrives in fast-paced manufacturing environments? Hopkins Manufacturing is looking for a Manufacturing Production/Project Engineer to play a key role in optimizing our processes, enhancing product quality, and supporting the continued innovation of our facilities and operations. This is more than just an engineering role - it's an opportunity to drive real impact across multiple areas of production, from workstation design to capital project execution. What You'll Do: Design safe, efficient workstations and processes for a diverse range of products Conduct time studies and define accurate labor standards Support Quality Control with process improvements Evaluate new technologies to improve cost, efficiency, and scalability Lead facility upgrades, capital equipment purchases, and layout enhancements Collaborate across departments and with external vendors to bring ideas to life What We're Looking For: BS in Engineering/Technology or 3-5 years of relevant manufacturing experience Strong analytical thinking, communication skills, and adaptability Experience with plastic injection molding is a strong plus A mindset for continuous improvement and safety-first thinking Why Hopkins? At Hopkins Manufacturing, we don't just build products - we build careers. Be part of a company that values innovation, teamwork, and long-term growth. You'll have the tools and support to take ownership of projects from concept to implementation. Ready to engineer your next career move? Hopkins Manufacturing Corporation is an equal opportunity employer and follows all national, state and local ordinances regarding applicant consideration. Hopkins Manufacturing Corporation has reviewed this to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the company reserves the right to change this job description and/or assign tasks for the employee to perform, as the company may deem appropriate.

We are seeking a highly motivated Process Engineer to lead and support our assembly operations with a strong focus on process optimization, automation, and Lean manufacturing. The ideal candidate will play a critical role in driving operational excellence, improving assembly line performance, and leading continuous improvement initiatives to enhance safety, quality, delivery, and cost. Responsibilities Develop and optimize assembly processes, ensuring alignment with quality, productivity, and cost targets. Identify and implement automation opportunities (robotics, vision systems, material handling, etc.) to increase efficiency and reduce manual labor. Collaborate with cross-functional teams including design, quality, maintenance, and operations to launch new products and processes into production. Facilitate continuous improvement initiatives using Lean tools such as Kaizen, 5S, Standard Work, SMED, Value Stream Mapping, and Root Cause Analysis. Analyze and resolve process issues through structured problem-solving (e.g., DMAIC, 8D, PDCA). Develop and maintain process documentation, including work instructions, process flow diagrams, PFMEAs, and control plans. Monitor KPIs such as cycle time, OEE, scrap, and downtime; identify trends and take corrective actions. Champion Lean culture within the organization by training, mentoring, and engaging team members at all levels. Evaluate new equipment and technologies; develop business cases and support capital projects from concept through implementation. Ensure compliance with safety, quality, and environmental standards in all process engineering activities. Qualifications Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering or related field. 2+ years of experience in process or manufacturing engineering, preferably in a high-volume assembly environment. Knowledge of assembly tooling, fixtures, and workstations. Proficiency in using engineering tools such as AutoCAD/SolidWorks, Excel (advanced), and statistical analysis software (e.g., Minitab).

Avo Photonics is a dynamic contract engineering services company that designs, develops and manufactures custom opto-electronic products for a large customer base. Members of our staff have the opportunity to design, prototype and produce next generation products for a diverse range of markets including environmental, medical, military, industrial, aerospace, and communications. We seek a diligent, dedicated and meticulous person who will help to further our success and reputation in the industry through world-class customer service. The successful candidate must plan his/her own work schedule, keep multiple records, be self-motivated, maintain a professional presence, and have the desire to take ownership of projects. This role may be suitable for a junior or senior engineer. Specific: Develop high yield, cost efficient, manufacturable processes as appropriate for target production volumes Act as end-to-end owner of key equipment such as die bonders, wire bonders, seam sealers, laser welders, etc Provide subject matter expertise for process development on equipment you own. Understand tool capability, process viability, and material selection Own maintenance, upgrade, and repair of equipment you own. Ensure minimal production downtime through regular preventative maintenance. Understand the function of the tools inside and out, in order to resolve issues as quickly as possible Provide data-based evidence that developed processes meet product requirements through design of experiments and statistical process control (within material availability) Generate documentation of the process development lifecycle for each project; contribute to business knowledge repositories for fixtures, materials, and process parameters Create work instructions and provide training on resultant processes to Product Engineering and Manufacturing personnel Guide the design of fixtures required to assemble products Recommend and implement new equipment and techniques to improve process capabilities Requirements: B.S. in Physics, Material Science, or relevant Engineering field 5 years experience with precision optical alignments or programming automated manufacturing equipment 5 years of experience in design of experiments and statistical process control. 3 years of manufacturing experience Proficiency with software-based logic, such as programming, Matlab, etc. Excellent communication skills and willingness to learn Avo Photonics offers competitive salaries and a comprehensive benefits package. Equal Opportunity Employer: Avo Photonics is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee of Avo Photonics by any method without a valid written contract in place with Avo Photonics will be deemed the sole property of Avo Photonics. No fee will be paid in the event the candidate is hired by Avo Photonics as a result of the referral or through any other means.

Title: Staff Engineer, MEMS Process Development Department: R&D, MedTech & Specialty Audio SUMMARY DESCRIPTION: Knowles seeks a motivated and creative individual to work in a fast-paced, market-oriented R&D team environment, developing MEMS technology for microphones and related mobile platform applications. A strong preference will be given to individuals with experience in MEMS process integration/process transfer and characterization of MEMS devices. Individuals will also be expected to have expertise in the knowledge of the foundry integration process, the basic of MEMS technology, data mining, statistical analysis, troubleshooting, failure prediction, DOE setup. Candidate will be expected to offer creative insights and solutions for R&D and production problems, to characterize and design MEMS process windows, to help execute and analyze statistical designed experiments and to carry out written and oral reporting. SPECIFIC DUTIES AND RESPONSIBILITIES: Interface with MEMS wafer foundry partners to execute on new product introductions (NPI) work. The basic concepts of the semiconductor foundry processes are a must requirement. Fast-reacted and responsible for any new issues and work closely with foundry suppliers. Collaborate with cross-functional team to understand issues and drive the root cause for each issue to achieve a stable high volume mass production products. Create and analyze statistically designed experiments to effectively evaluate process corners to identify major risks and ensure margin for high volume applications. Develop and implement techniques for gathering and analyzing large data sets to identify currently unknown relationships between in-line metrics and final device performance. Candidate with Failure analysis skills (SEM, FIB, TEM, SIMS, FTIR, Raman, etc.) is plus. POSITION REQUIREMENTS: Master Degree or above in Engineering field (e.g. Electrical Engineering, Materials Science, Chemical Engineering, Mechanical Engineering or Physics). Candidate with Master degree must have 7 years' process experience in MEMS or semiconductor industrial field. Candidate with PhD degree must have minimum 3 years' process experience in MEMS or semiconductor industrial field Candidate with MEMS/semiconductor/display process integration and process transfer expertise is plus. Statistical analysis software experience such as JMP, SAS, Minitab is preferred. A strong background in communication, negotiation, DOE setup, data analysis and reporting skills. Characterization/failure analysis experience in SEM, FIB, surface science analysis, interferometry, electrical testing, etc. is plus. Knowledgeable with scripting languages; including python and JMP JSL is plus. Ability to travel overseas occasionally and participate in evening calls with Asia COMPANY DESCRIPTION: Knowles is a market leader and global provider of advanced micro-acoustic microphones and balanced armature speakers, audio solutions, and high performance capacitors and radio frequency ("RF") filtering products, serving the MedTech, defense, consumer electronics, electric vehicle, industrial, and communications markets. Our focus on the customer, combined with unique technology, proprietary manufacturing techniques, and global operational expertise, enables us to deliver innovative solutions across multiple applications. Knowles, founded in 1946 and headquartered in Itasca, Illinois, has approximately 7,000 employees at facilities located in 13 countries around the world. At Knowles, we are committed to engineering a better tomorrow through the actions we take on a daily basis. We believe that our focus on ethical, socially responsible, and environmentally sustainable behavior guides our decision-making processes and helps keep us accountable. Visit us at knowles.com EEO-M/F/D/V

Job Posting Start Date 12-09-2025 Job Posting End Date 01-30-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary Summary: The Process Engineer - Automated Manufacturing will be based in Buffalo Grove, reporting to the Systems and Projects Engineering Manager and shall oversee process engineering capabilities focused on new products, processes, automation, manufacturing process improvements as well as internal engineering systems improvements. Responsibilities: Identify suitable manufacturing process, technologies, techniques based on product and operational requirements. Define and evaluate proposed equipment and processes for product manufacturability. Establish robust, repeatable and reproducible process parameters. Develop, implement and take ownership of process control methodologies. Prepare justification, purchase, manage equipment vendors and commission capital equipment for production. Have the capability to singly or with other engineering stakeholders identify root causes of failures in the manufacturing process. High level of participation during commissioning, validation and production ramp up. Including effective coordination, problem solving, training, etc. Plan and introduce equipment and process changes through Engineering Change Orders (ECOs). Trouble shoot process related issues. Determine statistical process capability for new and existing products. Improve safety, manufacturing techniques and through put. Develop and maintain process documentation. Review processing methods. Engage with the responsible function team(s) in activities associated with new process implementation and technology transfer. Assist in the development of training and provide training to production and engineering personnel during new technology transfer. Provide equipment maintenance and repair support as required. Guide cost improvement/reduction programs. Develop and improve internal engineering system processes to improve engineering efficiency and effectiveness. Document and train engineering staff as needed. Qualifications: Typically requires a bachelor's degree in mechanical, manufacturing or electrical engineering, or related field or equivalent experience and training. Typically requires a minimum of 3 years of experience in an automated manufacturing environment, from any of these types of highly regulated manufacturing industries: medical devices, automotive, pharmaceutical, food and beverage, defense/aerospace. Working knowledge of statistical methods, process capability studies, Process Flow Diagrams, Failure Modes and Effects Analysis and manufacturing processes. Strong analytical and problem-solving skills. Ability to interpret data, identify trends and make data-driven decisions. Aptitude for developing a detailed understanding of processes from start to finish. And ability to refine into safe, efficient and effective real-world processes. The ability to collaborate effectively, share knowledge, and contribute to a positive team environment. Effective communication, both written and verbal, is essential for collaborating with teams, presenting findings, and interacting with stakeholders. Dedication to continuous learning and improvement, staying updated on new technologies and best practices. What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to Illinois)$82,300.00 USD - $113,100.00 USD AnnualJob CategoryProduction Engineering Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

MTU Maintenance Fort Worth is part of the world's largest independent jet engine MRO company based in Germany providing aftermarket and OEM-licensed engine maintenance services worldwide. As a part of MTU Aero Engines, with over 80 years of experience in the design, development, and production of jet engine components, modules, and engines; MTU Maintenance is a global network of over 4,000 employees with over 35 years of experience in the MRO market. MTU provides maintenance from targeted hospital visits to complete overhauls on over 30+ commercial aero engine and industrial gas turbine lines and has completed more than 18,000 shop visits for over 1,400 customers worldwide. Within this Global network, MTU Maintenance Dallas provides hospital shop and on-site maintenance services. Process Engineer - Grinding Processes & Machine Industrialization This specialized Process Engineer position focuses on the development, optimization, and industrialization of grinding processes for compressor blades, turbine blades, and turbine shrouds within MTU Maintenance's engine overhaul operations. The role ensures precision, efficiency, and compliance in grinding operations while driving the implementation of advanced machinery and automation solutions. The engineer will collaborate closely with production teams, OEMs, and equipment suppliers to establish robust processes that meet stringent aerospace standards. Duties/Responsibilities: * Lead grinding process development for compressor and turbine blades, as well as turbine shrouds, ensuring compliance with OEM specifications and aviation standards. * Industrialize grinding machines and equipment, including defining technical requirements, supporting procurement, and overseeing installation and commissioning. * Optimize grinding parameters to achieve high precision, surface quality, and dimensional accuracy while minimizing cycle times. * Develop and maintain standardized work instructions and process documentation for grinding operations across MTU's global network. * Collaborate with OEMs and suppliers to validate new technologies and integrate best practices. * Drive automation and digitalization initiatives in grinding processes, including CNC programming and potential AI/RPA applications. * Support production during operational disruptions, providing technical troubleshooting and implementing sustainable corrective actions. * Conduct capability studies, risk assessments, and continuous improvement projects to enhance process stability and cost-effectiveness. * Ensure compliance with MTU quality methodologies and participate in internal/external audits. Required Skills/Abilities: * Bachelor's or Master's degree in Mechanical, Manufacturing, Aerospace Engineering, or related discipline. * Proven experience in grinding processes within aerospace or high-precision manufacturing. * Strong knowledge of CNC grinding machines, tooling, and fixturing concepts. * Familiarity with OEM manuals and aviation quality standards desireable. * Experience in industrialization projects, including equipment specification and supplier management. * Strong analytical and problem-solving skills with a structured approach. * Excellent organizational and interpersonal skills; ability to work in international teams. Benefits: * Medical, Dental, Vision, and STD insurance are effective immediately * Medical Flexible Spending Accounts * Employer-paid LTD and Life / AD&D insurance * 401k with employer matching up to 2% with an additional discretionary contribution to 1% provided from the employer * Paid 2 weeks of Vacation, paid 10 days of PTO & Holidays * Annual Tuition Reimbursement * Monthly $30 Gym Membership Reimbursement * Passport and renewal compliance, and TSA reimbursement * Employee Assistance Program Your Future at MTU Starts Here! Ready to give your career a boost? Send us your complete application by listing your earliest possible start date. We look forward to getting to know you. MTU Maintenance Dallas, Inc. is an Equal Opportunity Employer. All applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity, or any other protected class. For more information and additional resources on "EEO is the Law," please visit: ****************************************

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** **Senior Packaging Engineer** **Location:** Milpitas, CA or Garland, TX (On-site) **Your Role in the Company** As a Senior Packaging Engineer at Teledyne HiRel Electronics, you'll play a critical role in shaping the future of aerospace and defense electronics. You will lead packaging design initiatives, ensuring our products meet stringent reliability standards while driving innovation in integrated circuit packaging. Your expertise will help us deliver cutting-edge solutions to meet customer demands and industry trends. **What You'll Do** + Lead the design and development of new integrated circuit packages (plastic, ceramic, hybrid). + Translate customer requirements into optimized packaging solutions. + Collaborate with production and marketing teams to ensure feasibility and cost-effectiveness. + Assess and negotiate design trade-offs with customers and internal teams. + Research technology trends and recommend improvements for high-reliability applications. + Review and generate mechanical drawings for custom and standard packages. + Interface with customers and suppliers to represent Teledyne with authority and expertise. + Maintain knowledge of MIL-STD 883 and 1835 standards and apply them to designs. **What You Need** + Strong knowledge of semiconductor electronics and IC packaging - **required** . + Master's degree in engineering or equivalent experience (8+ years) - **required** . + Experience in aerospace and defense segment - **preferred** . + Familiarity with packaging materials and high-reliability applications - **required** . + MIL-STD 883 and 1835 experience - **preferred** . + Ability to work independently and on-site - **required** . + US citizenship and valid passport - **required** . + Ability to travel up to 10% domestically and internationally - **required** . **What We Offer** + Opportunity to work on advanced aerospace and defense technologies. + Collaborative team environment with strong technical leadership. + Competitive compensation and benefits package. **What Happens Next** Apply today to join a team committed to innovation and excellence. After submitting your application, our recruitment team will review your profile and contact you via email or phone for next steps. _US citizenship and ability to obtain DoD security clearance may be required._ **Salary Range:** $113,600.00-$151,400.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Job Posting Start Date 01-15-2026 Job Posting End Date 05-31-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a full-time PCBA Process Engineer located in Walker, Michigan. The PCBA Process Engineer leads the development and launch of new SMT/PCBA manufacturing lines, supporting NPI and future capacity expansion; Its main focus is the development of a new SMT line. What a typical day looks like Lead development and launch of new SMT/PCBA lines Define processes, layouts, and equipment selection Support NPI and line ramp-up activities Establish process controls and documentation Train production teams during new line introductions The experience we're looking to add to our team, Bachelor's degree in Engineering 2+ years of PCBA or electronics manufacturing experience Strong experience with SMT line design and NPI Experience with reflow, placement, inspection, automation Excellent communication (verbal and written), interpersonal and organizational skills. JT05 AA01 MS14 CC11 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryProduction Engineering Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Job Posting Start Date 01-12-2026 Job Posting End Date 03-12-2026Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a Process Engineer located in Coopersville MI. Reporting to the Engineering Manager, the Process Engineer charge for process-engineering capabilities focused on cost, quality and delivery improvements to hold up a manufacturing organization. Develop, implement and take ownership of process control methodologies. Participate in activities pertaining to cycle time and process improvements. Evaluate and select various engineered materials. What a typical day looks like: Recognize the manufacturing process, technologies, techniques and the product. Define, implement and evaluate proposed designs and processes for manufacturability. Have the capability to singly or with other engineering stakeholders identify root causes of failures in the manufacturing process. Work to maximize efficiency and productivity by identifying inefficiencies, developing new systems, and ensuring that operations run smoothly and to standards Gather, analyze, and interpret production data, cost analyses, and other relevant information to identify trends, solve problems, and develop reports on process improvements Improving plant processes by optimizing people, materials, and information flow High level participation in daily production activities and effective problem solving on daily issues. Prepare justification, purchase and implement capital equipment for production. Hold up and oversee new process equipment production. Hold up the raising and introduction of engineering change orders (ECOs). Establish robust, repeatable and reproducible process parameters. Implement statistical process research on new and existing products. Implement safety, productivity and give in improvements. Improve manufacturing techniques and through put. Provide continuous development of manufacturing techniques that will improve in-house capabilities and gives in. Develop and maintain process documentation. Review processing methods. Interface with production of all activities associated with new process implementation and transfer. Assist in the development of training and provide training to production personnel during new technology transfer. Guide cost improvement/reduction programs. The experience we're looking to add to our team: Bachelor's degree in mechanical engineering, electrical engineering, or mechatronics 6 years of experience in engineering in the high technology electronics industry. Design the overall factory layouts and workflows Familiarity with PLC programs Siemens, Allen Bradley, Etc Experience with troubleshooting and programming Vision systems; Cognex, Keyence, Omron, etc. Lean Six Sigma/DRM Green Belt highly preferred Automotive manufacturing experience Previous position supporting 24/7 production Strong Microsoft Office and Excel knowledge LI# YV1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryProduction Engineering Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Job Posting Start Date 01-15-2026 Job Posting End DateFlex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world.A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary.Job Summary The “PCBA Process Engineer” will be based in Walker, MI reporting to the Automation Manager. In charge of process-engineering capabilities focused on cost, quality and delivery improvements in order to hold up a manufacturing organization. The main focus of this position is the development of a new SMT line. What a typical day looks like: Recognize the manufacturing process, technologies, techniques and the product. Define, implement and evaluate proposed designs and processes for manufacturability. Have the capability to singly or with other engineering stakeholders identify root causes of failures in the manufacturing process. High level participation in daily production activities and effective problem solving on daily issues. Prepare justification, purchase and implement capital equipment for production. Hold up and oversee new process equipment production. Hold up the raising and introduction of engineering change orders (ECOs). Establish robust, repeatable and reproducible process parameters. Develop, implement and take ownership of process control methodologies. Trouble shoot process related issues. Participate in activities pertaining to cycle time and process improvements. Evaluate and select various engineered materials. Implement statistical process research on new and existing products. Implement safety, productivity and give in improvements. Improve manufacturing techniques and through put. Provide continuous development of manufacturing techniques that will improve in-house capabilities and gives in. Develop and maintain process documentation. Review processing methods. Interface with production of all activities associated with new process implementation and transfer. Assist in the development of training and provide training to production personnel during new technology transfer. Provide equipment maintenance and repair hold up as required. Guide cost improvement/reduction programs. The experience we're looking to add to our team: Typically requires a bachelor's degree in related field or equivalent experience and training. Typically requires minimum of 6 years of experience in engineering in the high technology electronics industry or related area. Extensive experience on electronics manufacturing specifically on printed circuit board assembly. Solder paste printing process, SMT placement, conveyor automation, SMT Inspection, reflow oven experience Strongly preferred Conformal coating and bonding experience a plus. JT05 AA01 MS14 CC11 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Job CategoryProduction Engineering Is Sponsorship Available? NoFlex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Kemira is a global leader in sustainable chemistry for water intensive industries. For more than 100 years, our chemistry has advanced human progress and quality of life. We call it chemistry with a purpose, better every day. At Kemira, we foster a collaborative and inclusive work culture that empowers our employees to thrive and make a difference. Learn more about Kemira at *********************** Kemira is looking for an experienced Process Engineer in our Marietta, Georgia, production facility. We are looking for someone to work in the plant on process and project engineering activities. This will include process improvements and modifications, new project development and implementation, preparing capital projects, and troubleshooting existing process problems. This person will also assist with process safety and management of change for the site. This position reports to the Plant Manager. In this role you will be responsible for: * Improving chemical production and utility processes. * Collaborating with production staff to improve safety, quality, and efficiency. * Coordinating process safety activities, including: * Management of Change * Process hazard analysis * Pre-start up reviews * Root Cause Analysis and corrective actions for process incidents. * Managing plant-wide improvement idea system. * Training personnel on new / changed processes. * Regulatory reporting and environmental protection activities. * Providing technical and process safety support for new / experimental product trials. * Developing and updating operating procedures, P&IDs, engineering records. * Supporting or leading capital projects. * Identifying and leading efforts to reduce emissions, energy and water consumption. * Developing competency to fill in for team members as needs arise. What you will bring to the team : * Chemical engineering degree * 4+ years of experience with chemical manufacturing, involving batch reactions and PSM processes. * Excellent written and oral communication skills (English). * Demonstrated track record of self-motivation and skills growth. * Demonstrated ability to manage multiple tasks/ projects simultaneously within tight timeframes. * Strong interactive skills with all levels of plant organization. * Willingness to travel when required. * Demonstrated Process Engineering and project support skillset including most of following: Process troubleshooting Material & energy balances Equipment sizing & specification PFD development Equipment startup & commissioning Automation & controls knowledge Project scope development Design safety reviews Contractor management Equipment ordering Process Hazard Analysis leadership What we offer: * Excellent opportunity to develop your career and learn new skills. * Work at a key manufacturing site for a company committed to innovation, care for people and customer success. * Professional, collaborative colleagues and modern tools, enabling you to perform at your best. * Attractive compensation and benefit package, including bonus program. Please apply with resume and cover letter no later than December 30, 2025 at ******************************* Kemira is a global leader in sustainable chemical solutions for water-intensive industries. We deliver tailored products and services to improve the product quality, processes, and resource efficiency of our diverse range of customers. Our focus is on water treatment, as well as on fiber and renewable solutions - enabling sustainability transformation for our customers. In 2024, Kemira reported annual revenue of EUR 2.9 billion with a global team of some 4,700 colleagues. Kemira is listed on the Nasdaq Helsinki. **************

Role: Industrialization Process Engineer Role ID: 2025-3087 Salary: $85,000 - $95,000 annually Our vision is to create a safe and sustainable world. Ricardo, member of WSP, is a global strategic, environmental, and engineering consulting company. With over 100 years of engineering excellence and employing close to 3,000 employees in more than 20 countries, we provide exceptional levels of expertise in delivering leading-edge and innovative cross-sector sustainable products and solutions. Every day, we enable our customers to solve the most complex and dynamic challenges to help achieve a safe and sustainable world. The Role This position offers a hands-on opportunity to leverage process engineering experience. Responsibilities include overseeing equipment/industrial suppliers, quality assurance, and processes to ensure timely production starts for new products. Your main goal will be to support the delivery of industrialization projects for localized internal manufacturing programs. Key Responsibilities Designing, developing, and maintaining manufacturing processes for current and future programs. Developing, implementing, and operating manufacturing process documentation, including Design for Assembly (DFA), Design for Manufacturing (DFM), Build Processes, Process Control Plans, PFMEA, Risk Assessments, Safety Systems, and Launch Readiness. Supporting the specification and design of equipment layouts and material flows. Requisitioning new and modified tooling and equipment required for assembly, including specification, procurement, commissioning, installation, and validation. Supporting the production team during the industrialization phases to enhance production quality and efficiency. Assisting with prototype builds according to project delivery requirements, including early validation of production processes and tooling. Developing assembly work standards to support both the prototype phase (build books) and the transfer to standard work instructions for production. Continually improving manufacturing processes to meet cost, quality, and delivery performance targets through series production. Ensuring quality standards are achieved in a series production environment. Essential technical and professional skills, knowledge, and qualifications: Industry experience in automotive, marine, or aerospace. Preferred experience Powertrain Systems (ICE). Hands-on experience with lean manufacturing principles. Understanding of relevant manufacturing methods, including detailed drawing dimensioning and Geometric Dimensioning and Tolerancing (GD&T). Design and CAD experience for tooling and fixtures, virtual builds, factory layouts (2D/3D), and assembly equipment. Demonstrable knowledge of various manufacturing processes and components used in assembly, including DFMEA, PFMEA, Control Plans, Capability Studies, Gauge R&R, work instructions, equipment acceptance, and quality gates (e.g., End of Line testing). Experience in industrialization and launch readiness. Experience with ISO standards for best manufacturing practices and processes. (i.e. ISO 9001/ IATF 16946, ISO 14001). Exceptional 8D problem-solving skills. Experience with Manufacturing Execution Systems (MES). Preferred experience with vision systems (i.e. Cognex, Keyence). Required Qualifications Minimum of a bachelor's degree in mechanical, manufacturing, industrial, electrical engineering, or related field. 5+ years of relevant experience in manufacturing or process engineering. A minimum of 2 years' experience in New Product Introduction (NPI) process engineering or a similar role, preferably within the automotive sector, where skills can be transferred to the responsibilities outlined above. Behavioural Competencies Strong communication skills with the ability to engage effectively with suppliers and clients across cultures. Ability to work both as part of a team and independently, demonstrating self-motivation, reliability, and punctuality. Ethical integrity, upholding the highest values with colleagues, customers, and vendors. Resilience and a goal-oriented approach to achieving targets. Flexibility to travel to suppliers and clients domestically and internationally. Working Here At Ricardo, every voice matters. We foster inclusion, collaboration, and a culture where your expertise makes a difference. Your ideas will help us deliver innovative solutions that contribute to safer and more sustainable communities worldwide. Work-Life Balance We are open to discussing flexible work arrangements. Well-being is at the heart of our culture, enabling everyone to thrive. By prioritizing a healthy work-life balance, we create an environment where everyone can flourish and reach their full potential. Benefits We value our employees and offer a comprehensive benefits package to support your physical and mental well-being. Equal Employment Opportunity Ricardo is an equal opportunity employer. All qualified applicants will be considered for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or other legally protected status. #LI-AM1

We are seeking a highly experienced Corporate Senior Industrial/Process Engineer with a strong background in cost estimating and process optimization to support quoting and lead continuous improvement initiatives within our manufacturing operations. This role will provide technical expertise, mentorship, and leadership in developing cost models, improving operational efficiency, and ensuring profitability across the organization. Job Responsibilities: Quoting & Estimating Develop detailed cost estimates for new and existing products, incorporating labor standards, materials, tooling, and overhead. Collaborate with Sales, Engineering, and Operations to prepare accurate, competitive customer quotes. Maintain and refine quoting standards, databases, and process assumptions. Compare quoted assumptions to actual production results, and adjust standards as needed. Process Engineering & Improvement Lead time studies, workflow analyses, and labor utilization projects to drive process efficiency. Champion lean manufacturing initiatives and continuous improvement programs across departments. Direct cross-functional teams during new product launches, ensuring smooth transition from quoting to production. Evaluate and recommend advanced tooling, equipment, and automation strategies to improve efficiency and cost-effectiveness. Reporting & Strategic Impact Provide executive-level reporting on quoting accuracy, cost analysis, and improvement opportunities. Develop long-term strategies for cost competitiveness and operational efficiency. Document best practices and create standardized processes for quoting and industrial engineering activities. Education, Skills and Experience: Bachelor's degree in Industrial Engineering, Manufacturing Engineering, or related field. 8+ years of experience in industrial engineering, cost estimating, or process optimization within manufacturing. Proven track record of leading projects, mentoring team members, and driving measurable process improvements. Advanced knowledge of time studies, cost modeling, lean manufacturing, and continuous improvement tools. Proficiency in ERP/MRP systems, cost estimating software, and Microsoft Excel. Strong leadership, communication, and cross-functional collaboration skills. License, Certification or Special Requirements: None required Work Environment and Physical Demands: The work environment and physical demands described here are representative of those that an employee will encounter to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and fumes or airborne particles. The employee is occasionally exposed to wet and/or humid conditions, toxic or caustic chemicals, and outside weather conditions. The noise level in some work environments may be loud. The employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee frequently is required to stand, walk, and reach with hands and arms. The employee is occasionally required to sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus. Personal Protective Equipment (PPE) must be worn including but not limited to: eyes, ear, foot and/or other protective devices as required.

& Sons Schweid & Sons is a family-owned and operated premium ground beef company with a proud heritage spanning four generations. We supply top-quality beef to Retail, Foodservice, and National Account customers across the U.S. and are committed to quality, customer service, and innovation in protein manufacturing. The Role We are seeking a hands-on Industrial Engineer / Process Engineer with 2-4 years of experience in the food manufacturing industry to support process improvement, efficiency projects, and productivity initiatives. This role focuses on optimizing manufacturing operations, reducing waste, improving throughput, and ensuring compliance with food safety and quality standards. This role will report to the Director of Engineering. What You'll Work On * Review and document current manufacturing processes to find ways to improve efficiency, productivity, safety, and cost. Analyze daily operations, create and update various production layouts. * Develop and update regularly all production metrics like throughput, standard staffing and quality parameters. * Design and implement process improvements that increase yield, reduce waste, improve cycle times, eliminate bottlenecks, and support smooth operations-all while meeting food safety and quality standards. * Partner with Operations, Quality, and Maintenance teams to troubleshoot bottlenecks and implement corrective actions. * Lead or support new equipment installations and modifications for the engineering department -from concept to start-up. * Use data analysis and statistics to find bottlenecks, process variation, and improvement opportunities, then apply data-driven solutions to boost efficiency. * Troubleshoot production issues collaboratively, identify root causes, and implement corrective and preventive actions. What You Bring * Bachelor's degree in engineering field like Industrial, Manufacturing or mechanical. * Relevant 2-4 years of food manufacturing or CPG industry experience. * Excellent verbal and written communication skills with the ability to explain technical recommendations in layman's terms. * Strong analytical and problem-solving skills; proficiency in Excel, data analysis, and process modeling tools. * Familiarity with Lean Manufacturing, Six Sigma, and Continuous Improvement tools. * Experience with process mapping, time studies, and root cause analysis. * Knowledge of Good Manufacturing Practices (GMPs) and food safety standards (HACCP, SQF, etc.). Nice-to-Haves * Experience in new equipment installation and designing process procedures. * Experience with automation, packaging, or high-speed food production lines. * Proficiency with CAD or simulation software (AutoCAD). Work Environment This position is primarily in College Park, Georgia with up to 20% travel to our NJ location and other engineering trips. What We Offer * Time Off: PTO, Safe & Sick Time, and Paid Holidays. * Health Benefits: Medical, vision, dental, HRA and voluntary disability benefits. * Financial Benefits: 401(k) + employer match and life insurance. * Location: This is an on-site role located in College Park, GA. * Environment: Our facility is refrigerated. In this role you will be exposed to < 40 degrees for multiple hours of the day.

Schweid & Sons is a family-owned and operated premium ground beef company with a proud heritage spanning four generations. We supply top-quality beef to Retail, Foodservice, and National Account customers across the U.S. and are committed to quality, customer service, and innovation in protein manufacturing. The Role We are seeking a hands-on Industrial Engineer / Process Engineer with 2-4 years of experience in the food manufacturing industry to support process improvement, efficiency projects, and productivity initiatives. This role focuses on optimizing manufacturing operations, reducing waste, improving throughput, and ensuring compliance with food safety and quality standards. This role will report to the Director of Engineering. What You'll Work On Review and document current manufacturing processes to find ways to improve efficiency, productivity, safety, and cost. Analyze daily operations, create and update various production layouts. Develop and update regularly all production metrics like throughput, standard staffing and quality parameters. Design and implement process improvements that increase yield, reduce waste, improve cycle times, eliminate bottlenecks, and support smooth operations-all while meeting food safety and quality standards. Partner with Operations, Quality, and Maintenance teams to troubleshoot bottlenecks and implement corrective actions. Lead or support new equipment installations and modifications for the engineering department -from concept to start-up. Use data analysis and statistics to find bottlenecks, process variation, and improvement opportunities, then apply data-driven solutions to boost efficiency. Troubleshoot production issues collaboratively, identify root causes, and implement corrective and preventive actions. What You Bring Bachelor's degree in engineering field like Industrial, Manufacturing or mechanical. Relevant 2-4 years of food manufacturing or CPG industry experience. Excellent verbal and written communication skills with the ability to explain technical recommendations in layman's terms. Strong analytical and problem-solving skills; proficiency in Excel, data analysis, and process modeling tools. Familiarity with Lean Manufacturing, Six Sigma, and Continuous Improvement tools. Experience with process mapping, time studies, and root cause analysis. Knowledge of Good Manufacturing Practices (GMPs) and food safety standards (HACCP, SQF, etc.). Nice-to-Haves Experience in new equipment installation and designing process procedures. Experience with automation, packaging, or high-speed food production lines. Proficiency with CAD or simulation software (AutoCAD). Work Environment This position is primarily in College Park, Georgia with up to 20% travel to our NJ location and other engineering trips. What We Offer Time Off: PTO, Safe & Sick Time, and Paid Holidays. Health Benefits: Medical, vision, dental, HRA and voluntary disability benefits. Financial Benefits: 401(k) + employer match and life insurance. Location: This is an on-site role located in College Park, GA . Environment: Our facility is refrigerated. In this role you will be exposed to < 40 degrees for multiple hours of the day.

Schweid & Sons is a family-owned and operated premium ground beef company with a proud heritage spanning four generations. We supply top-quality beef to Retail, Foodservice, and National Account customers across the U.S. and are committed to quality, customer service, and innovation in protein manufacturing. The Role We are seeking a hands-on Industrial Engineer / Process Engineer with 2-4 years of experience in the food manufacturing industry to support process improvement, efficiency projects, and productivity initiatives. This role focuses on optimizing manufacturing operations, reducing waste, improving throughput, and ensuring compliance with food safety and quality standards. This role will report to the Director of Engineering. What You'll Work On Review and document current manufacturing processes to find ways to improve efficiency, productivity, safety, and cost. Analyze daily operations, create and update various production layouts. Develop and update regularly all production metrics like throughput, standard staffing and quality parameters. Design and implement process improvements that increase yield, reduce waste, improve cycle times, eliminate bottlenecks, and support smooth operations-all while meeting food safety and quality standards. Partner with Operations, Quality, and Maintenance teams to troubleshoot bottlenecks and implement corrective actions. Lead or support new equipment installations and modifications for the engineering department -from concept to start-up. Use data analysis and statistics to find bottlenecks, process variation, and improvement opportunities, then apply data-driven solutions to boost efficiency. Troubleshoot production issues collaboratively, identify root causes, and implement corrective and preventive actions. What You Bring Bachelor's degree in engineering field like Industrial, Manufacturing or mechanical. Relevant 2-4 years of food manufacturing or CPG industry experience. Excellent verbal and written communication skills with the ability to explain technical recommendations in layman's terms. Strong analytical and problem-solving skills; proficiency in Excel, data analysis, and process modeling tools. Familiarity with Lean Manufacturing, Six Sigma, and Continuous Improvement tools. Experience with process mapping, time studies, and root cause analysis. Knowledge of Good Manufacturing Practices (GMPs) and food safety standards (HACCP, SQF, etc.). Nice-to-Haves Experience in new equipment installation and designing process procedures. Experience with automation, packaging, or high-speed food production lines. Proficiency with CAD or simulation software (AutoCAD). Work Environment This position is primarily in College Park, Georgia with up to 20% travel to our NJ location and other engineering trips. What We Offer Time Off: PTO, Safe & Sick Time, and Paid Holidays. Health Benefits: Medical, vision, dental, HRA and voluntary disability benefits. Financial Benefits: 401(k) + employer match and life insurance. Location: This is an on-site role located in College Park, GA. Environment: Our facility is refrigerated. In this role you will be exposed to < 40 degrees for multiple hours of the day.

Job Description Support assembly operations with the necessary tooling and processes in an efficient and timely manner. Continually develop new processes and tooling to improve safety, quality, cost and delivery. Must be self-starting and able to work in a team environment with minimal supervision. Duties & Responsibilities: Evaluate existing manufacturing processes to identify areas that could benefit from changes and improvements. Define, document and implement new and changed manufacturing processes. Line support of assembly operations. Processes include transport, welding, coatings, and finishing. Responsible for the manufacturing process details; how, where, and why. Create and maintain all required process documentation. Specifications, designs, sourcing and project management of tooling and equipment projects. Gather and organize necessary data for justification of projects requiring capital investment. Follow all written procedures for the creation and control of fixtures, lifting and hanging devices and material handling equipment. Lead customer groups on tours of the factory. Application of advanced manufacturing engineering skills, i.e. Lean, Theory of Constraints. Position Requirements: Bachelor's degree is required, engineering discipline preferred. Strong organizational, analytical and communication skills. Must be familiar with manufacturing methods and have a strong emphasis on welding, finishing, and assembly of light-gauge steel or aluminum. Solidworks (or other solid modeling software) and MS Office knowledge a must. Ability to manage multiple projects in a cross functional team and communicate progress across all levels of management. Physical/Mental Requirements Needed to Perform the Essential Functions of the Position: Normal standing, bending, walking or lifting ability associated with an office environment. Capable of working in an industrial manufacturing environment in proximity to sources of noise, weld flash, and metal dust. Must be capable of communicating verbally with individuals at all levels of the organization and have good critical reasoning, organization, and mechanical skills.

Job Description Assist with planning, designing, implementing and maintaining the infrastructure and equipment within our Knapheide Truck Equipment Center facilities. Manage projects related to building systems. Support Knapheide Truck Equipment Centers with designing, implementing and optimizing manufacturing processes. Focus on improving efficiency, quality and cost by analyzing existing systems, developing new equipment and/or processes. Duties & Responsibilities: Assist Facilities Manager with new/expanded/remodeled sites including facility/site layouts, facility design, site design, capital planning, construction management, capital purchases, production line layouts, racking, paint booths, overhead cranes, equipment procurement, etc. Evaluate existing processes to identify areas that could benefit from changes and/or improvements. Responsible for specifications, designs, sourcing and project management of line layouts, tooling, fixtures and equipment projects for both equipment center operations and fleet run operations. Define, document and implement new and changed manufacturing and installation processes. Evaluate processes across multiple locations and determine best practices for standardization across all equipment centers. Gather and organize necessary data for justification of projects requiring capital investment. Position Requirements: Bachelor's degree in Manufacturing Engineering, Industrial Engineering, Mechanical Engineering or Construction Management preferred. Experience running large scale/capital projects preferred. Experience with Procore and Bluebeam is preferred. 3-5 years of relevant work experience is preferred. Must be willing to work in a fast-paced environment and be a self-motivator with a sense of urgency. Strong organizational, analytical and communication skills. SolidWorks (or other solid modeling software), 2D CAD and MS Office knowledge are a must. Ability to manage multiple projects in a cross functional team and communicate progress across all levels of management. 25-50% travel expected. Physical/Mental Requirements Needed to Perform the Essential Functions of the Position: Normal standing, bending, walking or lifting ability associated with an office environment. Capable of working in an industrial manufacturing environment in proximity to sources of noise, weld flash, and metal dust. Must be capable of communicating verbally with individuals at all levels of the organization and have good critical reasoning, organization, and mechanical skills.

Why Join LeClaire Manufacturing? At LeClaire Manufacturing, you'll be part of a team that values innovation, craftsmanship, and collaboration. As a growing company with deep roots in precision aluminum casting and machining, we offer a dynamic environment where your ideas and skills directly impact our success. You'll enjoy the opportunity to work with cutting-edge technology, contribute to exciting new product launches, and grow your career alongside passionate professionals. We believe in investing in our people, fostering a culture of continuous improvement, and celebrating the pride that comes from building something exceptional. Position Summary: We are seeking a highly versatile Manufacturing Engineer / Tooling Specialist to support a fast-paced startup manufacturing environment. This role will flex between designing and building machining fixtures, permanent molds, and foundry patterns; and programming CNCs to meet evolving production demands. The proportion of design, fabrication, and CNC programming work will shift based on the immediate needs of the startup phase and early production ramp-up. Key Responsibilities: Design & Engineering Create 3D CAD models and detailed drawings for machining fixtures, permanent molds, and patterns. Collaborate with engineering, quality, and production teams to optimize designs for manufacturability and performance. Incorporate mold flow or machining simulation feedback into final designs. Fabrication & Toolmaking Manufacture tooling in-house using manual and CNC machining equipment, additive manufacturing, and standard shop tools. Assemble, fit, and finish molds, patterns, and fixtures to meet production specifications. Troubleshoot and repair tooling to minimize downtime. CNC Programming Develop and optimize CNC programs (3-, 4-, and 5-axis as applicable) for fixture components, patterns, and production parts. Select tooling, work holding, and cutting strategies to improve cycle time, quality, and tool life. Validate programs through simulation and on-machine prove-out. Cross-Functional Startup Support Shift seamlessly between design, hands-on toolmaking, and programming depending on production priorities. Support first-run trials, PPAPs, and process optimization efforts. Maintain accurate documentation and revision control for tooling and programs. Qualifications: Proven experience designing and building machining fixtures, permanent molds, and patterns. Proficiency in CAD (SolidWorks, Inventor, etc.) and CAM (Mastercam, Fusion 360, etc.) software. Strong CNC programming skills and hands-on machining experience. Familiarity with aluminum casting and machining processes preferred. Ability to move quickly between varied tasks and priorities in a startup environment. Strong problem-solving skills and attention to detail. Attributes for Success: Adaptable and resourceful, able to adjust workload focus daily. Communicative and collaborative across multiple departments. Quality-minded with pride in craftsmanship. Self-driven and capable of taking projects from concept through completion. Physical Requirements: Ability to lift up to 50 lbs. Comfortable working in both office/design and shop floor environments. Able to stand for extended periods when operating equipment. Ready to Make an Impact? If you're a hands-on problem solver who thrives in a fast-paced, collaborative environment, we invite you to bring your expertise to LeClaire Manufacturing. This is more than just a job-it's a chance to shape the future of a growing company while honing your skills across design, fabrication, and CNC programming. Join us and be part of a team that values craftsmanship, innovation, and continuous improvement. Apply today and help us build something extraordinary.