Powder coater jobs near me - 34 jobs

Job Title: Powder CoaterLocation: Columbus, Ohio 43230 (Gahanna) Rate: Starting at approximately $20/HR, negotiable based on experience Shifts: 2nd Shift: Monday - Thursday, 3:15 PM - 1:45 AM (4 x 10-hour days) Training: Monday - Friday, 7:00 AM - 3:30 PM (Training period TBD) Position Overview: The Powder Coater plays a key role in producing high-quality, precision-finished products in a fast-paced job shop environment. This position is 90-day temporary to permanent and works alongside experienced, dependable team members. Training will be provided to learn powder coating processes on both conveyor lines and batch booths. Applicants must complete an print test and interview. Position Responsibilities: Perform manual powder coating (non-automated) on conveyor systems Tape/mask parts using heat-resistant tape; plug and cap components as required Use an Exacto knife and demonstrate fine tactile skills Load and unload parts from conveyor lines Follow detailed instructions and retain process knowledge Read and interpret prints and schematics Maintain high attention to detail to ensure defect-free products Assist various departments as needed based on production needs Participate in cross-training across the shop Maintain a clean, safe, and organized work area Uphold fast-paced job shop standards and meet physical demands of the role Position Requirements: Minimum 2+ years of powder coating experience, preferably manual spraying on a conveyor system Previous experience in a manufacturing or job shop environment Ability to read and understand drawings, schematics, and work instructions Familiarity with hand tools; ISO knowledge helpful High school diploma or equivalent Strong print reading and interpretation abilities Ability to follow precise instructions and maintain accuracy Competency in using basic hand tools and preparation equipment Ability to learn powder coating operations on both conveyor and batch systems Other Requirements: Must pass print test and interview Tobacco-free and substance-free workplace Overtime may be required Must meet all pre-employment screening requirements

Operate powder coating paint booth to produce defect-free parts Apply proper powder coating techniques to meet quality and finish standards Set, operate, and document dry-off and cure oven parameters Monitor and control powder usage to minimize waste and rework Perform accurate job logging and powder usage documentation per run Optimize coating processes to improve throughput and operational efficiency Complete booth cleanups and color changeovers efficiently and correctly Clean paint booth trays and equipment daily and between setups Properly store paints to prevent cross-contamination and material loss Identify and report powder gun or equipment maintenance issues promptly

The Industrial Painter / Powder Coater will be responsible for prepping, setting up, and coating racks of metal products in the manufacturing facility. This role involves reading job orders, prepping, racking, and masking parts for painting or powder coating. Additionally, the position requires preparing and mixing paint or powder specific to each job and color, as well as setting up paint and powder coating machinery according to job specifications. **Shift and Pay - Two openings, one on each shift:** + 2nd shift (Mon-Fri, 2p-10p) + 3rd shift (Sun-Thur, 10p-6a) + Pay $28-$30/hr **Responsibilities** + Read and interpret job orders for painting and powder coating tasks. + Prep, rack, and mask parts for painting or powder coating. + Mix paint or powder specific to each job and color. + Set up paint and powder coating machinery per job specifications. + Utilize required personal protective equipment (PPE) to coat materials in paint and powder coating booths. **Essential Skills** + 3+ years of industrial coating experience, including spray painting with HVLP or powder coating. + Proficiency in paint prep and machinery setup for paint and powder coat processes. + Experience with booth and racked parts painting. **Job Type & Location** This is a Permanent position based out of York, PA. **Pay and Benefits** The pay range for this position is $28.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully remote position. **Application Deadline** This position is anticipated to close on Feb 6, 2026. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Powder Coater - 2nd Shift Rittal is a leading global provider of solutions for industrial enclosures, power distribution, climate control, and IT infrastructure, as well as software and services. The company is a member of the Friedhelm Loh Group, a successful international player with 18 production plants, 80 subsidiaries, and 12,000 employees. Rittal LLC has built a strong tradition of innovation and takes pride in a progressive approach to engineering. We design and manufacture the world's leading industrial and IT enclosures, racks, and accessories, including high-efficiency, high-density power management, and climate control systems for industrial, data center, outdoor, and hybrid applications. Primary Activities/Duties: Prepare metal parts for powder coating by cleaning, masking, and hanging them on racks. Operate powder coating equipment to apply paint according to specifications. Inspect finished products for quality, coverage, and consistency. Maintain proper documentation of production and quality checks. Perform routine maintenance and cleaning of painting equipment and spray booths. Follow safety procedures and wear appropriate PPE at all times. Assist with loading/unloading parts from the curing oven. Support department housekeeping and 6-S initiatives. Participate in cross-training and internal audits as needed. Knowledge & Experience: HS Diploma or GED strongly preferred. Prior experience in industrial painting or powder coating preferred. Ability to read and interpret work instructions and safety guidelines. Basic computer skills; familiarity with Microsoft Office Suite including Outlook. Strong attention to detail and ability to work in a fast-paced environment. Ability to lift and move parts and equipment as required. Safety Requirements: Wear safety-toed footwear Safety glasses with side shields Hearing protection Other (PPE) where required. Work Environment: Warehouse and manufacturing areas with exposure to hot and cold temperatures, dust, and noise. #MFG If you require reasonable accommodation for any part of the application or hiring process due to a disability, you may contact the company's Human Resources Department at **************. This option is reserved for individuals who require accommodation due to a disability. Rittal LLC and Eplan are proud to be an affirmative action/equal opportunity employer. EEO, including Disability/Vets.

Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio-frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide - including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive - we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at ********************** At Avery Dennison, some of the great benefits we provide are: Health & wellness benefits starting on day 1 of employment Paid parental leave 401K eligibility Tuition reimbursement Employee Assistance Program eligibility / Health Advocate Paid vacation and paid holidays Job Description The Coating Operator is assigned to work on a coating line and may work in one or more workstations including the face unwind, liner unwind, die, main console/winder, and quality lab. Individuals in this role may be proficient on more than one coating asset in a given location. In this role, you will work D-Team, 5:50PM-6AM, 3-1-3, 12Hr, Nights. The hourly rate for this position is $24.16 / hour. The coating line operator is responsible for leading machine set ups and changeovers, problem-solving, coordinating PM's, making decisions on machine adjustments. Primary Job Duties and Responsibilities: Activities and duties may vary dependent upon site specific needs. Essential functions may include, but are not limited to: Coating Operator Load raw material into the machine and unload the finished product. Determine and control the machine cycle varying and modifying as necessary. Perform tests and check products routinely for multiple characteristics using standard measuring devices and making some judgments against not readily measurable standards. Meet production schedules and program production sequences for optimal productivity. Follow standard operating procedures and specifications or instructions of higher level technical personnel and monitor meters, gauges, valves, flow ratios, temperatures, pressures, and related controls and guidelines to ensure adherence to production/process specifications. Report any malfunctions or abnormalities and make minor adjustments and repairs to equipment. Maintain production records and logs of equipment and product performance. Adjust set up and process operations accordingly. Follow all health, safety, and housekeeping procedures, policies and practices and consistently work in a safe manner with regard to self, co-workers, and manufacturing systems. Attend and participate in all required training. Understand and implement the quality standard procedures that relate to the role and responsibilities of a Coating Operator. Perform general housekeeping tasks and waste removal within the department/group and assists other areas as required. Continuously review current processes and search out improvement methods to improve product/process quality and reduce waste, rework, and unnecessary work that adds no value to the work or process. Support safety, quality, and continuous improvement initiatives. Teamwork: Assist and support other team members in meeting department and site goals. Participate and share in performing all tasks necessary to run the facility. Contribute and participate in team decision making. Provide support in project work and other special requests. Perform all other functions as necessary. Qualifications Minimum Requirements: High School Diploma or equivalent (GED) or 3+ years of relevant manufacturing work experience. Previous manufacturing experience preferred Must be able to follow written and oral instruction. Must regard safety as a core value; must serve as role model for other employees and encourage adherence to safety practices, policies and procedures. Must have strong service and quality focus; address issues effectively when problems arise and take initiative to understand the root cause, then communicate / educate the team in a timely manner. Must be able to actively contribute in a team based environment; encourage open communication and positive interaction with peers and management to effectively reach a common goal. Must demonstrate proficiency in essential tasks of the job and a willingness to learn and share knowledge; must take initiative to cross-train and sustain acquired skills. Must have demonstrated record of flexibility and dependability in order to support production and customer focus. Must be able and willing to work overtime, including short-notice requests. Must demonstrate proficiency with computer applications, especially strong MFG Pro transactional skills. NOTE: The physical requirements of this role may vary by location. A detailed listing of the physical requirements may be obtained from the local Human Resource contact or the site Occupational Health Nurse. Additional Information All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or [email protected] to discuss reasonable accommodations.

Coater Operator - 1st and 3rd shift available Pay: $19/hr. - $21.00/hr. Seeking Coater Operators to join the 3rd shift team. The ideal candidate is mechanically inclined and eager to learn. Full training is provided for individuals motivated to develop their technical and production skills in a stable, growth-oriented environment. Key Responsibilities Operate coating machinery according to established specifications and production requirements. Set up, adjust, and monitor equipment during production runs. Perform visual and dimensional quality checks to detect defects. Calculate material yields and record production data accurately. Follow all safety procedures when working around rotating equipment and pinch points. Assist with equipment maintenance, material handling, and line cleanup as needed. Skills & Knowledge Experience with Gravure, Roll, or web coating processes (preferred). Ability to measure to 1/32” with a ruler and +/-.005” with calipers or micrometers (preferred). Familiarity with tools such as rulers, shears, calipers, micrometers, spanner wrenches, and basic hand tools. Strong mechanical aptitude, attention to detail, and problem-solving ability. Physical Requirements Frequently lift up to 70 lbs and occasionally move materials exceeding 100 lbs. Maintain strong hand-eye coordination and manual dexterity. What's Offered $1/hr attendance bonus Comprehensive paid training Career growth opportunities Supportive team environment Competitive compensation and benefits If you feel you have the above qualifications, please apply for immediate consideration. EverStaff offers employees Medical, Dental, Vision, Accident, Life, Disability and Cancer insurance coverage. All qualified applicants will receive consideration for employment without regard to race, color, religion, ethnicity, national origin, sex, gender identity, sexual orientation, disability status, protected veteran status or any other protected status under the law. EverStaff is an equal opportunity employer (M/F/D/V/SO/GI)

Job DescriptionSalary: $22 - $38 About the Role: The Laborer Coater supports the installation, maintenance, and replacement of steel natural gas pipelines by performing manual labor and applying protective coatings to steel pipe and fittings. This role ensures pipe integrity by preparing surfaces, applying appropriate coatings, and assisting the crew in daily construction and excavation activities under the supervision of the Crew Foreman. ESSENTIALFUNCTIONS Prepare steel pipe surfaces for coating through cleaning, scraping, grinding, or blasting as required. Apply protective coatings (e.g., epoxy, tape wrap, shrink sleeves) to field joints, welds, and fittings according to industry and manufacturer standards. Ensure coating quality by inspecting and performing holiday testing to detect flaws or holidays in the coating. Assist with pipe laying, aligning, backfilling, and trenching operations. Operate hand and power tools (grinders, wire brushes, torches, etc.) safely and effectively. Support excavation, site prep, and clean-up tasks as directed. Follow safety protocols and wear all required PPE, including flame-resistant clothing. Communicate effectively with team members and report issues or hazards to supervision. Travel to and from job sites, potentially working long hours, weekends, or in inclement weather. Additional duties as needed. Minimum Qualifications: High school diploma or GED. Five (5) years of general labor experience in construction, utility, or pipeline environments. Familiarity with coating systems and surface preparation tools. Ability to lift up to 50 lbs and perform physically demanding work. Basic knowledge of safety protocols in gas utility or pipeline construction. Valid drivers license and reliable transportation. Ability to solve conflict, create team atmosphere, dependable, and demonstrates accuracy and thoroughness. Endurance to perform physical tasks throughout the workday, including bending, stooping, kneeling, and standing for extended periods. Must be able to work in a variety of weather conditions. Preferred Qualifications: Experience applying field coatings to steel pipe in gas distribution or transmission work. OQ (Operator Qualification) certifications related to coating, pipe installation, or gas work. Confined space and trench safety training.

SUMMARY: The Coater apprenticeship on the coating line is a two-year program. The coater apprenticeship will be responsible for learning correct procedures for set-up, operation, maintenance, and troubleshooting problems on all equipment on the coating line. They must also learn how to safely use all equipment on coating line. In order for the apprentice to remain in the program, they must demonstrate dependability, enthusiasm, cooperation and an ability to perform the duties of the job in an efficient and capable manner. Excessive lateness or absences result in the cancellation of the program. The apprentice must maintain a written log of work performed and other pertinent information. Must be the site leader in living and driving the Company Core Values and High-Performance Work Culture. ESSENTIAL DUTIES AND RESPONSIBILITIES: Learn the proper use of tools and proper mechanical methods Learn the Company's safety rules and participate in safety audits Learn and understand Lockout/Tagout points for each machine Learn fire protection plan and action (training and supervisory) Learn responsibility for assigned maintenance schedule Learn responsibility for set up and operation of all welded can line equipment Learn work order and production tracking systems Display good housekeeping practices - must keep equipment and area clean and orderly Report mechanical problems Maintain and lubricate equipment Make minor mechanical repairs to keep machinery running until full repair can be implemented Be receptive to instructions, take notes, ask questions, and be pro-active Must be able to use efficiently, micrometer, Vernier, dial indicator, and general tools Follow company personnel and product safety requirements including standards such as those from SQF and internal GMP's Willing to help wherever needed Travel is required as needed for this position All other duties as assigned SUPERVISORY RESPONSIBILITIES: This position has no supervisory responsibilities. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Successful accomplishment of duties and responsibilities requires the following: * Operate the stacker on all lines * Recognize and identify common coating and litho defects * Be Trained on the forklift * Operate the waxer * Mix Inks * Make plates * Feed on litho presses EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Better than average mechanical ability. Testing will be done to determine math and reading levels. Mechanical aptitude will be tested. Additional courses may be required as deemed necessary by management. Training will be done on the job and/or through courses at local schools and/or colleges. It may be necessary to attend classes outside of scheduled work hours. Successful completion of all classes is necessary for the apprentice to remain in the program. LANGUAGE SKILLS: Ability to read, write, and comprehend simple instructions, short correspondence, and memos in English. Ability to effectively present information in one-on-one and small group situations. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure; using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percentage. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, and diagram form. Ability to deal with problems involving several concrete variables in standardized situations. PHYSICAL DEMANDS: While performing the duties of this job, the employee is frequently required to stand, walk, and sit; use hands and fingers to handle and feel; reach with hands and arms; climb, balance, and hear. The employee is frequently required to climb, balance, stoop, kneel, and crouch. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: While performing the duties of this position, the employee is exposed to moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles, risk of electrical shock and vibration. The noise level in the work environment is usually loud. NOTE: This identifies the general nature and scope of work to be performed. Independent Can reserves the right to revise all or any part of this and to add or eliminate essential job functions at any time. Designation of any job duty as an essential function is not intended as an assurance or guarantee that a team member has any right to perform the particular job duty, except as required by Independent Can. This job description is subject to change based on the needs of the position and/or the Company.

Job Title: Emulsion Coater Job Status/ Grade: Hourly Location: Troy, Ohio Department: Manufacturing, Coating Reporting To: Plant Supervisor Direct Reports: None Pay Range: $20.50 Plus $1.00 Shift Differential Job Summary: The Emulsion Coater Machine Operator - 2nd Shift is responsible for operating an emulsion acrylic adhesive coating machine to coat coils of paper, film, or foil with pressure sensitive adhesive by performing the duties listed below. 2nd Shift is 3:00pm - 11:00pm. Essential Job Functions: Set-up coater for each operation. Places rolls of face paper and backing substrate on shafts and positions correctly on machine. Turns control dials of machines to regulate speed of substrates, temperature of drying ovens, and flow of adhesive. Operate coater at maximum speed for each product. Check pre-production (set-up) samples for correct pattern materials, web dimensions, etc. Provide test samples, as required, to Quality Assurance. Check materials pre, in process and post production using calipers and rulers. Halt production if found to be running out of specification. Accurately pick raw material, return raw material, enter labor tracking and complete rolls into the ERP system. Accurately label rolls for shipment, inventory or next process in line. Maintain accurate, neat machine reports. Report material problems to Supervisor and Quality Assurance. Recommend improvements to process and equipment. Maintain improvements to process and equipment. Resolve minor problems with equipment and process. Report major problems to Supervisor and assist in resolving. Must be able to operate forklift and clamp truck. Must be able to work with little supervision. Responsible for startup and shut down of machine. Maintain neat, orderly work area. Other duties may be assigned. Qualifications: Required: High school diploma or general education degree (GED) Mechanical aptitude and prior machine operator experience Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals Written Communication - Writes clearly and informatively; Presents numerical data effectively; Able to read and interpret written information. Quality - Demonstrates accuracy and thoroughness; Applies feedback to improve performance; Monitors own work to ensure quality. Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity. Safety and Security - Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. Attendance/Punctuality - Is consistently at work and on time. Preferred: Background in Math/Mechanics Physical Requirements: The Machine Operator physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to talk or hear. The employee frequently is required to use hands or fingers, handle or feel objects, tools, or controls. The employee is required to stand; walk; sit; squat; kneel and reach with hands and arms. The employee must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this position include close vision, distance vision, and the ability to adjust focus. Work Environment: The Machine Operator work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works with moving mechanical parts. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is usually moderate.

A manufacturing company is seeking an individual to set-up and operate a machine that applies coating materials to a variety of rolled substances. This company works on a 2-2-3 rotating shift, so you work 2 days, then you'll be off 2 days, and then you work 3 days.

COME JOIN OUR JOURNEY! When you join TT, you join our global community of visionaries, creators, and achievers dedicated to engineering and manufacturing electronic solutions enabling a safer, healthier and more sustainable world. Simply put, we are a global manufacturer with a passion for engineering advanced electronics that benefit our planet and people for future generations. We are committed to having a positive impact on the world through a culture built around safety, transparency, collaboration, and positive relationships. Our teams are fueled by performance and expertise, leading the charge in innovation, efficiency and delivering world-class customer service. Be part of the journey. Role Overview and Responsibilities Summary: Responsible for prep, coat and un-prep of circuit board assemblies that require conformal coating. Essential Duties and Responsibilities include the following: Other duties may be assigned. Capable of identifying type of conformal coating, cure schedule and coating requirements Demonstrate proper handling precautions when working with process chemicals and materials Pass the Respiratory Testing and Fit Test Initially and Annually Work to safe practices and use all Personal Protection Equipment (PPE) specified Demonstrate proper techniques in operation and preventative maintenance of HPLV spray gun Follow proper techniques in measuring wet film and dry film conformal coating thickness Use math skills for mixing conformal coatings to correct ratios per manufacturing instructions Review shelf life of conformal coatings and thinners prior to usage Demonstrate proper handling precautions when working with process chemicals and materials including proper disposal of general and hazardous waste Follow applicable coating requirements in performing inspections and touch-up of conformal coatings per manufacturing instructions Follow requirements for set up, 1st piece inspection and in-process audits Follow proper techniques in operation of aerosol spray can Locate and use SDS information Qualifications, Skills and Attributes Qualifications: to perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The Team Member must be able to maintain confidentiality and have good judgment. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and required physical activities. A pleasant professional image is expected at all times. Team member will be expected to exhibit high ethical standards and promote the same within the company. Physical Demands: The physical demands are representative of those that must be met by Team Member to successfully perform of the essential functions of this job. Light Work: Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to lift, carry, push, pull or otherwise move objects. Constantly walk, finger, grasp, feel 90-100% of the time; frequently stoop, reach, push, lift, talk, hear and do repetitive motions 60-90% of the time. Math Ability: Ability to calculate figures and amounts such as proportions and percentages. Visual Acuity: The Team member is required to have close visual acuity to perform activities for operation of machines, including visual inspection, using measurement devices; and/or assembly of parts at distances close to the eyes. Ability or increased ability to see color, or perceive color differences, under normal lighting conditions. Work Environment: The Team member is subject to inside environmental conditions: Protection from weather conditions but not room temperature changes, there is sufficient noise to cause the worker to increase volume in order to be heard above ambient noise level. The Team member is subjected to atmospheric conditions including odors 90-100% of the time and is required to wear a full face respirator, gloves and apron. The Team Member is frequently (60-90% of the time) in a small enclosed room to perform their duties. The Team Member is required to work overtime on a constant basis Solving Technology Challenges for a Sustainable World We want the very best people in our TT family across the globe - so we welcome applications from everyone, to celebrate a diverse mix of experiences, backgrounds and identities. We are committed to equality of opportunity for all and you can rest assured that TT Electronics takes positive steps to ensure we are an inclusive business, that will welcome and support you, from your initial application to wherever your career takes you! Please get in touch if you'd like to discuss any reasonable adjustments to your application, in order that we can accommodate and support you in the process. If you want to work for a company where who you are is valued and respected, we'd love to hear from you. #WeAreTT #BeMeAtTT TT Electronics does not accept any unsolicited resumes from third parties. Any resumes submitted by a third party for this or any other position will not be subject to any recruitment fees if hired.

MWG is looking to add a Powder Coater to our Pippin Location!ESSENTIAL DUTIES AND RESPONSIBILITIES: To ensure quality of the painting process. Able to run the paint booth and have full understanding of the powder coating techniques and equipment. This includes the cleaning and monitoring of equipment. Set and operate both the dry off and cure ovens and record settings. Accurately record and document powder usage at the end of each production run. Log in and log out of jobs accurately and timely. Optimize the painting process to its fullest to improve throughput and increase efficiencies. Perform clean ups and changeovers in a timely manner. Assure that booth is properly cleaned and that all equipment is cleaned properly prior to going to next set up. Clean out paint booth trays at end of shift daily. Store all paints in proper location and prevention of cross contamination of paints by properly storing unused paints at end of runs. Reduce the over usage of powder paint by making needed adjustments to powder equipment. Report any and all gun maintenance related issues to Line Leader and/or Supervisor as they occur. WORK ENVIRONMENT: The employee in this role will be working indoors, in an industrial manufacturing environment. The employee will regularly be exposed to noise levels requiring hearing protection, moving equipment and mechanical parts. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. MINIMUM QUALIFICATIONS: Experience: 1-3 years of experience in powder coating. Experienced in powder coating quality requirements Licensures and Certifications: None Education: High School graduate or equivalent.

Now Hiring: Epoxy Coater - Multiple Shifts | Aurora, OHHours & Shifts Available: 1st Shift: Monday-Friday, 6:00 AM to 2:30 PM 2nd Shift: Monday-Thursday, 2:00 PM to 12:30 AM Weekend Shift: Friday: 2:00 PM to 2:00 AM Saturday: 11:00 AM to 11:00 PM Sunday: 11:00 AM to 11:00 PM Paid for 40 hours while working 36 Location: Aurora, OH Pay & Benefits: $19-21 per hour, depending on experience Contract-to-hire opportunity with long-term stability Excellent benefits upon hire: 100% employer-paid medical, dental, and life insurance (employee only) 401(k) with match (100% of first 3%, 50% of next 2%) Paid holidays and time off Modern, well-organized, and safety-focused work environment Job Responsibilities: As an Epoxy Coater, you'll work with a specialty coating machine to finish custom fabricated electrical enclosures. This role is ideal for someone with prior coating or spray experience who enjoys hands-on, detail-driven tasks. Key duties include: Mixing and preparing epoxy coating materials Operating the coating machine and loading/unloading parts Performing quality checks and visual inspections throughout the process Monitoring material flow and machine operation Maintaining a clean, organized workspace Ensuring all safety and handling procedures are followed Required Qualifications: 6 months to 1 year of prior painting or coatings experience required (automotive, spray painting, industrial, etc.) Comfortable working with epoxy coating materials Ability to stand for long periods and lift up to 50 lbs Good hand-eye coordination and attention to detail Ability to follow verbal instructions and work independently No blueprint reading, calipers, or micrometer use is required for this role.Workplace & Culture: You'll be part of a fast-growing, high-tech company producing custom power systems for top-tier global clients. Facilities are modern and well-equipped with robotics, lasers, and press machinery. Despite high demand, the company maintains a clean, structured work environment and strong team atmosphere. Employees are valued, and long-term opportunities are available for those who show reliability and initiative.Pre-Employment Requirements: 5-panel drug screen Background check Dress Code & Safety Gear: Steel-toe boots, jeans, and t-shirt required Safety glasses and additional gear provided as needed

Responsibilities: Follow all Safety rules and required PPE Be willing to learn all aspects of line both coater operator and Re-wind operator Will learn Mobile equipment for job tasks Keep a clean work environment for safety reasons Communicate with the Operators and Leads, exchange information with the incoming shift PM tasks on machine when needed Communicate issues or restraints to the Supervisor Follow quality processes and call out anything out of sorts Basic Qualifications: High School Graduate or GED. Be passionate about maintaining a safe work environment Good attendance record Physical Requirements - Bending, crawling, stooping, standing, vision, lifting (minimum of 50lbs.), walking, Ability to stand for standard 8-hour shift or longer Cognitive skills needed to complete tasks, including abilities such as learning, remembering, focusing, categorizing, and integrating information for decision making, problem-solving, and comprehending Ability to work assigned shift including overtime and weekends, as needed Must be authorized to work in the U.S. Preferred Qualifications: Experience in a packaging or other manufacturing environment Licensed to drive a lift truck, but will train if not already licensed

Join our dynamic team as a Painter/Powder Coat Operator. If you're passionate about craftsmanship and eager to make an impact, we want to hear from you! What you'll do * Prepare surfaces for painting/coatings * Apply paint and coatings using various techniques. * Collaborate with team members on projects to ensure high-quality finishes * Maintain a clean and organized work environment while adhering to safety protocols * Participate in lean manufacturing practices to enhance efficiency in operations Basic qualifications * Attention to detail with quality awareness. * Basic math skills. * Ability to work standing. * Lifting up to 50# We are committed to creating a stable work environment that fosters the development of your skills for a long-term career, with opportunities for advancement. Job Category: Manufacturing Job Type: Full Time Job Location: 1370 Lavelle Drive Shift: 1st Apply for this position Twist, Inc. and Twist Aero are equal opportunity employers.

Industrial Powder Coat Painter - 1st Shift We build what the future runs on. Accelevation designs, manufactures, and installs the physical infrastructure that powers today's most advanced technologies. We've grown over 440% in the last 18 months because we take ownership, solve hard problems, and build with purpose. Join us to build the future. Your Impact As an Industrial Powder Coat Painter, you will ensure metal components receive consistent, high-quality powder coat finishes that meet specification and safety standards. Your work directly impacts product durability, appearance, and customer satisfaction. Your Day-to-Day Responsibilities Prepare and coat metal parts to achieve full, even coverage using established processes Select correct parts based on shop reports and production instructions Prepare metal hooks and jigging on moving conveyors Operate and maintain powder coat painting and electrostatic spraying equipment Follow safety protocols and maintain a clean, organized work area Collaborate with team members to support efficient workflow and production goals Perform additional duties as needed to support other departments Qualifications Experience in industrial painting or a related field preferred, powder coat experience a plus Working knowledge of materials handling and basic mechanical concepts Familiarity with different paint types, finishes, and coating techniques Experience with electrostatic spraying equipment preferred Ability to read and understand work orders and production instructions Strong attention to detail and commitment to quality Reliable team player with clear communication skills Hours M-F, 7am-3:30pm Benefits Competitive compensation Paid time off 401(k) retirement plan with company match Comprehensive health, dental, and vision insurance Collaborative, high-energy workplace Our Core Values Safety - We proactively protect our people and environment Inclusion - We respect and appreciate diverse perspectives and backgrounds Speed - We move fast, act decisively, and stay agile Innovation - We challenge assumptions and simplify processes Judgment - We make sound decisions with the business in mind Accountability - We take ownership and deliver results Physical Demands and Work Environment Employees must be able to talk and hear and frequently sit, with occasional standing, walking, reaching, climbing, balancing, stooping, kneeling, crouching, and crawling. Regular lifting up to 25 lbs and occasional lifting up to 50 lbs is required. Vision requirements include close vision, color vision, and the ability to adjust focus. Work may involve exposure to moving mechanical parts, airborne particles, chemicals, electrical hazards, and very loud noise levels requiring hearing protection. Reasonable accommodations may be made to enable individuals with disabilities to perform the functions. Job Application Notice Accelevation LLC does not ask for payment or sensitive personal details, such as bank account or Social Security numbers, during the job application process. If you are unsure about a job posting, apply directly at **************************** to stay safe. Equal Opportunity Employer Accelevation LLC is an equal opportunity employer. Inclusion is one of our core values. We build teams that celebrate and embrace diversity, fostering a culture of respect for all. As part of our pre-hire process, we may conduct a background check and use E-Verify to confirm employment eligibility.

At A-dec, we do more than create the highest quality products and services for the dental industry; we strive to deliver a superior employment experience for each of our team members. With an environment that encourages and assists each person in developing to their highest potential, a career at A-dec is incredibly rewarding. Overview The Powder Coat Technician II performs routine and repetitive tasks associated with pre and post coating operations. Duties include finishing work, hand deburr, parts cleaning, parts routing, basic drill and tap work, masking and/or racking parts to be painted, and operating various machines/equipment in the assigned area. DUTIES AND RESPONSIBILITIES: * Sets up and operates painting equipment in production area and performs various secondary activities within assigned area (Prep, Package, Manual Paint Booth, Auto Paint Booth) with minimal supervision. * Inspects assigned work, achieves and maintains quality and productivity standards while following safety guidelines. Must not pose risk to self or others. * Safely and efficiently route parts using material handling equipment. * Actively engages and participates in department continuous improvement efforts. Implements improvements to processes, programs, tooling and fixturing. * Works collaboratively within the team to maintain a neat and organized workstation. * Understands and completes documentation needed to comply with policies and procedures appropriate for the position. * Actively participates in all department, quarterly, and company meetings. * May train less experienced Powder Coating Technicians. * May perform pretreatment duties as assigned. QUALIFICATIONS: * Must be able to fulfill the minimum requirements of a Powder Coat Technician I. * Must be able to read, write and communicate in English with demonstrated ability to follow written and oral instructions and troubleshoot problems when necessary. Actively participate in pass down communication to other shift peers and leadership. * Demonstrated manual dexterity required. * Demonstrates basic knowledge of ISO procedures. * Demonstrated ability to effectively inspect assigned work and the work of others using blueprints and measuring tools such as electronic coating thickness testers, gauges or special equipment as required. * Ability to interpret job-related blueprints, work instructions, and production order checklists to standards. * Must be able to effectively use parts handling equipment. * Demonstrated knowledge of most common tooling types, and ability to identify most common material types. * Demonstrated ability to perform basic shop math calculations. * Previous liquid and/or powder coat painting experience preferred. Physical Requirements: Ability to lift, carry, push, pull or otherwise maneuver up to 35 pounds with or without assistance on a routine basis. Must have manual hand dexterity to grasp, operate tools and equipment repetitively. Able to walk, stand, sit, bend, reach, and occasionally kneel, climb steps, and twist throughout an entire shift. Some areas may be exposed to chemicals, noise, vibration and /or dust, and require the use of appropriate Personal Protective Equipment (PPE); such as, but not limited to safety glasses, hearing protection, foot protection, etc. Disclaimer This job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not to be construed as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. A-dec reserves the right to assign job duties and days and hours of work based on factors such as workload requirements, staffing levels, and customer demands. At A-dec, we value our people and show it by prioritizing an inclusive culture, total well-being, and opportunities for learning and career advancement. A background check and screen for the illegal use of drugs is required. A-dec is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. In addition, A-dec will not discriminate against applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another. *VEVRAA Federal Contractor" A-dec is interested in qualified candidates authorized to work in the United States for US-based positions. We are unable to sponsor or take over sponsorship of employment visas.

United Alloy is a preferred designer, manufacturer and powder coater of certified metal tanks, skids, frames, trailers, chassis, and related products crafted to world-class quality standards in strategic partnership with Fortune 500 OEM customers. UA products are proudly “Made in the USA”. In addition to being made in the USA, UA is also 9001 certified, and has been recognized as a WBENC woman/minority owned business. CULTURE United Alloy empowers and entrusts our employees to manage the responsibilities of both their work and home lives. We are an agile team that produces extraordinary results, setting the standard in safety, quality, productivity, and profitability. Employees act with a sense of ownership, take initiative to problem solve and is committed to the company's mission, their team and themselves. United Alloy is supportive and encouraging of our employees, we are able to help make their dreams become a reality. At UA, every employee matters to us. We want everyone to have their own success story in their personal and professional lives. It's one way that makes us an actively engaged team, inspired to win together. SUMMARY: This position preps and assembles fabricated components and materials in conjunction with customer quality requirements and United Alloy manufacturing philosophies. Performance, quality preservation, organization and efficiency are essential. HOURS: Monday - Thursday, 5:00am - 3:00pm. Overtime worked based on business need. WHAT YOU'LL DO: Willing and able to paint 100% of assigned hours for the length of employment at UA Understands and can execute proper powder coat application techniques Understands paint gun settings and can regulate as necessary Is able to troubleshoot and make minor repairs to maintain equipment Understands and can execute the required PM to paint line equipment Is able to paint efficiently and effectively to meet UA's paint aesthetic and customer requirements Is able to use equipment to check and verify paint thickness WHAT YOU'LL BRING: The individual must have some exposure to metal fabrication concepts and processes This individual must have previous experience or exposure to powder paint application and processes The individual must possess a keen sense of attention to detail Must possess the ability to operate overhead cranes, tape measure, caliper, basic hand tools and air tools Must be able to read and interpret blueprints Must possess manual dexterity Must possess hand/eye coordination Must possess effective written and verbal communication skills Must perform all duties in conjunction with UAI and ISO requirements Must be able to regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move 100 pounds with an assist 12 Expected Behaviors of Actively Engaged Person - 100% Responsible, Trustworthy, Team Player, Clear Communicator, Empathy, Humility, Emotional Self-Control, Resolves Conflict Directly, Positive Attitude, Respects Others, Problem Solver, and Agile. BENEFITS In addition to excellent starting wages, we offer a competitive compensation and benefits package as well as numerous perks. Medical, dental and vision  Generous RTO and Vacation policy  401(k) with company match  Bonus opportunities  Paid training  Company paid holidays   Earn a competitive salary and performance-based bonuses  NOTE: Given the nature/size of our product and customer requirements, we require a stringent hiring process to ensure the highest quality product. Qualified candidates must successfully complete: Basic Skills/Measurement Test | Blueprint Reading Test | Pre-Employment Physical & Drug Screen Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to stand, sit, walk, bend, twist, stoop, pull, push, assemble, and carry for extended periods of time. Ability to lift and/or move up to 25 pounds regularly, frequently lift or move up to 50 pounds and occasionally lift and/or move up to 100 pounds with an assist. Work Environment: Ability to perform in a manufacturing environment that may have high noise levels, dust, chemicals, oil, and grease. Ability to work in an environment that may be either hot, cold or humid.

Job Description Operate powder coating paint booth to produce defect-free parts Apply proper powder coating techniques to meet quality and finish standards Set, operate, and document dry-off and cure oven parameters Monitor and control powder usage to minimize waste and rework Perform accurate job logging and powder usage documentation per run Optimize coating processes to improve throughput and operational efficiency Complete booth cleanups and color changeovers efficiently and correctly Clean paint booth trays and equipment daily and between setups Properly store paints to prevent cross-contamination and material loss Identify and report powder gun or equipment maintenance issues promptly