Precision Castparts jobs

Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Job Description RESPONSIBILITIES: * Casting shell removal using high pressure water blast cabinets. * Visual inspection of castings for excess shell or other general defects (core break, inclusions etc.) * Use of fixtures for all FR's. * Verification of parts to paperwork. * Record all work performed in Lot Control . * Other cross-training opportunities will exist within the department. * Keep the area in a clean, orderly and safe working condition. * Follow all safety rules. * Comply with all applicable Standard Operating Procedures. * Perform all other duties assigned by supervision. QUALIFICATIONS: * Pay close attention to detail. * Must show ability to follow detailed procedures reliably. * Be able to meet daily production goals. * Ability to work in a team environment. * Ability to be self-directed and motivated. * Capable of handling multiple tasks. * Demonstrate proficiency of applicable procedure instructions. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.

Reporting to the President of Energy Services and Solutions Group, the Vice President of Operations will lead Manufacturing, Continuous Improvement, and Industry 4.0 Initiatives. You will develop and execute short and long-term plans to achieve the key operational objectives and annual profit plan for the business, impacting nearly $4.6B revenue. You will have the opportunity to lead 5 divisions including 15 manufacturing plants cross the US and Mexico with a focus on business growth, technological transformation, and delivering an exceptional customer experience. Essential Functions: * Develop and lead initiatives in alignment with the strategic plan and annual profit plan objectives to drive operational performance and financial results. * Establish objectives and track key performance indicators across the organization. Ensure prompt and accurate reporting systems on all aspects of operations, leveraging EPM and Balanced Score Card. * Drive the manufacturing strategy for the Group and divisions optimizing capacity utilization through footprint strategy for sites and key manufacturing technologies * Proactively champion Operations focused on Environmental, Health & Safety (EHS), driving a zero-incident culture. * Lead and support implementation of the Operating for Growth (O4G) transformation for the Manufacturing/OPEX workstream. Partner cross functionally with transformation teams to support Group sites evolving to cost centers * Create a culture of exceeding customer expectations, ensuring that the organization is highly responsive to customer needs and issues. * Continuously improve operations through alignment with the Eaton Business System with a strong focus on driving a Lean Culture, drive technology enablement and I-4.0 strategy, implementation, and execution. * Drive change through improved organizational capability, ensuring motivation and retention of a high-performance management team and workforce. * Demonstrate a leadership style that perpetuates the Eaton Leadership Model and the Eaton Code of Ethics. Qualifications and Experience * Bachelor's degree required; MBA preferred. * 15+ years' experience with progressive levels of responsibility in Manufacturing, Supply Chain, OPEX for a global manufacturing leader in a similar scope/scale role. * Plant manager and multi-site management experience * Demonstrated success in driving zero incident culture, with employee ownership of EHS. * Knowledge and experience with multiple ERPs and conversions preferred. * Proven track record in building high performance teams, leading cross-functionally, developing and retaining employees, and driving organizational change. * Knowledge of current technologies in manufacturing (assembly and fabrication), engineering, materials management/inventory control, distribution and logistics, purchasing, quality assurance systems processes and practices. * Strong financial and business acumen; prior profit and loss responsibility required. * Track record of successful leadership, performance results, organizational development, and operational improvement. The expected annual salary range for this role is $236,997.00 - $ 347,595.60 a year. This position is also eligible for a variable compensation compenent. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. The application window for this position is anticipated to close on 8/13/2026. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

The Senior Payroll Manager for North America supervises payroll and time/attendance operations across the United States and Canada, ensuring timely and accurate payroll processing in compliance with regional laws and regulations. This role involves managing a team of payroll professionals and vendor partners, collaborating with HR, IT, Legal and Finance departments, and optimizing payroll systems and processes to support the organization's strategic goals. This leadership position should reflect and drive a demeanor of continuous improvement ensuring Emerson is achieving standardization of processes and setups across all entities and that operations are effective and efficient in their delivery. The Payroll Operations Senior Manager-North America will act as the expert with knowledge in all areas of payroll and time/attendance operations across the United States and Canada. We look forward to seeing your application! _Preferred location: St. Louis, MO (willing to consider candidates located in other major cities near Emerson's main offices)._ **In this Role, Your Responsibilities Will Be:** + Provide direction, guidance and coaching to a multi-country staff to ensure effective utilization of resources and timely and accurate delivery of payroll and payroll downstream processes and career development. + Foster a culture of continuous learning and professional development within the payroll team. Identify training needs, provide opportunities for skill enhancement, and support career growth. Conduct regular performance reviews and offer constructive feedback to help team members achieve their full potential. + Sets strategy and direction for US & Canada Operations in accordance with Global Payroll Operations & Global HR & country HR strategy initiatives and leads in the execution of key North America objectives and SLAs including developing and maintaining operational health metrics and driving adoption of case management tools. + Ensure payroll processes align with federal, state, and local laws, including regulatory reporting, labor laws and tax obligations in both the U.S. and Canada. Stay updated on changes in payroll and tax regulations and implement vital adjustments to maintain compliance. Conduct regular audits to ensure adherence to compliance standards and address any discrepancies. + Analyze current payroll practices and find opportunities for process improvements and automation specific to North American payroll and time operations. Drive initiatives to streamline processes, reduce errors, and enhance efficiency. + Promote an internal customer service focus through effective leadership, supervision and development of staff. Address and resolve payroll-related issues and discrepancies promptly, ensuring employee satisfaction. + Drive effective policy development, administrative oversight, responsiveness to customer needs, and timely communication across the organization. + Lead new payroll implementations, mergers, acquisitions & divestitures through the management and oversight of data needs and system configurations, driving standards in partnership with Digital HCM, HRIS, project teams and applicable vendor partners. + Maintain efficient understanding of the software tools that are used to manage and maintain payroll, time/attendance and tax compliance. + Recommend, supervise and keep controls surrounding the payroll, payroll tax and time/attendance functions as required by the Sarbanes-Oxley Act and Internal Audit. + Serve as critical issue support for payroll, tax and time/attendance related issues and employer liabilities for healthcare, retirement, pension information, taxes and other related items. **Who You Are:** You adjust communication to fit the audience and the message. You establish and maintain customer relationships. You learn from new experiences and others, and from structured learning. You readily adapt to personal, interpersonal, and leadership behavior. You display a can-do demeanor in good and bad times. You take time to ask questions and define the problem and make learning a priority and a goal. **For This Role, You Will Need:** + Bachelor's degree in Human Resources, Finance, Business, or related field + Minimum of 10 years of related work experience, preferably in a fast paced multi-national payroll environment + Minimum of 5 years working in a leadership/project leadership role with a global team that works in a customer service or operational support function + Experience with expatriates and executive compensation plans + Legal authorization to work in the United States - Sponsorship for this role will not be provided **Preferred Qualifications that Set You Apart:** + Experience with Oracle applications + Experience with ADP applications + Experience with mergers, acquisitions and divestitures + Certified Payroll Professional (CPP) **Our Culture & Commitment to You** At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Our compensation philosophy is simple: we pay a competitive base salary, within the local market in which we operate, and reward performance during our annual merit review process. The salary range for this role is $120,000 - $170,000 annually, commensurate with the skills, talent, capabilities, and experience each candidate brings to a role. This position will be open for a minimum of 7 days from the day of posting. Applicants are encouraged to apply early to receive optimal consideration. In compliance with the Colorado Job Application Fairness Act, in any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. **Work Authorization** Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1 (including those with OPT or CPT), H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible. \#LI-TF3 \#LI-HYBRID **WHY EMERSON** **Our Commitment to Our People** At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. **Work Authorization** Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. **Equal Opportunity Employer** Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. **Accessibility Assistance or Accommodation** If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . **ABOUT EMERSON** Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! **No calls or agencies please.** **Requisition ID** : 25028522 Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Monday-Friday 6:00am-2:00pm Job Description Responsible for visual inspection of wax pattern and dressing of defects, and other various tasks related to pattern manufacturing. Responsibilities: * Visually inspects wax patterns to ensure customer requirements are met * Dress defects using hot torches and hot plates; trims flash; fixes air bubbles; label patterns; assembles parts; applies sealant; keeps work area clean. * Accurately report daily production quantities Physical and Mental Demands: * Job is performed at a work bench where you have the option to sit or stand. Work requires attention to detail, steady hands, good visual acuity. * Constant use of both upper extremities to inspect, dress, repair, label and seal wax patterns. Frequent use of hand tools; reach / handle activities at waist, knee, shoulder, overhead. * Push/lift 10-35 lbs All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.

Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Job Description Position Summary: Maintenance Superintendent will manage the execution of the plant's existing maintenance program. This includes responsibility for identifying parts and critical spares for the plant and maintaining all equipment in a safe working condition. The Maintenance Superintendent will manage the working maintenance supervisors and oversee the following for the department: scheduling, assigning daily task/work orders, training, on-boarding, hiring, and performance. Finally, the Maintenance Superintendent will need to collaborate with the department managers to ensure equipment is running and PMs are current to meet production requirements. Essential Functions: * Schedule employees to effectively meet production needs and ensure vacation is consistent with plant policies. * Provide the shift-to-shift communication link to keep all team members working toward the same goals. * Provide effective supervision and coaching to employees to achieve the required equipment uptime and PM goals. * Monitor company programs to ensure that all employees comply with safety regulations and procedures. * Ensure that the high standard of 6s and housekeeping is maintained in the department at all times. * Maintain thorough knowledge of all production processes and materials. * Work with employees to resolve technical and personnel problems. * Troubleshoot and provide cost effective resolutions to production problems. * Maintain a minimum inventory of critical spare parts for all plant equipment. * Cost responsibilities pertaining to repairs and other maintenance budgeting issues. Operate within the budget. * Responsible for performance reviews, discipline, and coaching/counseling of direct reports. * Manage hazardous waste in accordance with company policy. * Other duties as assigned. Required Skills: * Demonstrated ability to manage multiple tasks and priorities and easily adapt to changing situations. * Able to meet deadlines and be accountable as it relates to PM and equipment uptime. * Able to work flexible hours, off-shifts holidays, and weekends as needed to support production. * Must be a motivated self-starter with a strong sense of urgency and the ability to work independently. * Maintain a positive work atmosphere with a customer focus approach to support Operations and safety. * Strong oral and written communication skills. Desired Skills: * Highly organized, self-motivated individual who can work independently as well as in a collaborative team environment. * Demonstrated ability to lead a skilled maintenance team and mentor the department. * Proven ability to work hands-on with the team to achieve optimal equipment performance. * Proven experience in Manufacturing Industry with the maintenance/facilities department. Experience & Education * Prefer 5+ years' experience in a maintenance and/or plant engineering related position. * Thorough knowledge of mechanical, electrical, computer driven, pneumatic and hydraulic manufacturing systems. * Experience leading people and obtaining results through others, with excellent verbal and written communication skills. * Previous experience as a maintenance technician or skilled craft is desired. * Bachelor's degree in Industrial, Mechanical, Electrical or related Engineering field is desirable. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Relocation Relocation is authorized for this position. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.

Whirlpool Corporation (NYSE: WHR) is a leading home appliance company, in constant pursuit of improving life at home. As the only major U.S.-based manufacturer of kitchen and laundry appliances, the company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including Whirlpool , KitchenAid , JennAir, Maytag , Amana, Brastemp , Consul , and InSinkErator . In 2024, the company reported approximately $17 billion in annual sales - close to 90% of which were in the Americas - 44,000 employees, and 40 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com. The Program | Start Date: July 2026 Manufacturing is at the heart of what we do at Whirlpool Corporation and controls engineering is the engine driving our success. Our full time Manufacturing Leadership Development Program (MLDP): Controls Engineering Track provides an experience with World Class Manufacturing (WCM) operations at production plants that have made Whirlpool Corporation a global leader in manufacturing home appliances. This intentionally structured, 3-year program is designed to accelerate controls engineering talent through three 12-month rotations at two to three of our plant locations. You will gain invaluable experience building a career with strategic impact, starting as a Controls Engineering Analyst and, upon completion of the program, have the opportunity to graduate as a Senior Analyst. Rotational assignments and experiences Rotation 1: Plant Operations (Plant Location 1) - develop a strong technical foundation in controls engineering, project management, communication and teamwork. Rotation 2: Plant Operations (Plant Location 2) - deepen technical expertise in robotics and Manufacturing Execution Systems (MES), develop skills in problem-solving, collaboration, and early-stage project leadership. Rotation 3: Process Transformation - Focus area in automation and cross plant standardization by gaining experience in strategic thinking, change management, ROI analysis, and influencing others. Your day-to-day The program is structured to provide assignments that gradually increase in complexity, helping you build a deep technical and leadership foundation. Key responsibilities and developmental opportunities include: Designing, building, and troubleshooting core automation systems like PLCs, HMIs, motor drives. Deepening technical expertise through the integration of advanced systems such as Robotics, Manufacturing Execution Systems (MES), and AI-powered vision systems. Leading and supporting strategic, cross-plant transformation projects focused on the Industrial Internet of Things (IIoT) and AI/ML, culminating in a high-visibility Capstone Project. Applying Lean and World Class Manufacturing principles to analyze and solve complex business problems and drive continuous improvement. Managing automation projects in a cost and time-constrained environment. This includes developing project specifications with stakeholders, purchasing equipment, and seeing projects through from concept to completion. Building leadership capabilities through direct mentorship from senior engineers, formal project management experience, and collaboration with cross-functional business partners. What we offer Whirlpool offers competitive compensation and benefits, including but not limited to relocation support, annual bonus, 401k match, paid time off, insurance plan, fitness reimbursement, health savings accounts, free wellness coaching, fertility and adoption support, parental (maternity and paternity) leave, education support, and free financial coaching. In the Manufacturing Leadership Development Program: Controls Engineering Track, we will accelerate your career path by offering you: Diverse, cross-functional set of developmental experiences Mentorship and sponsorship from senior manufacturing leadership Structured development curriculum focused on leadership and technical skill building Exposure and visibility to company leadership Opportunities to take on leadership roles within your peer group and your team The opportunity for promotion upon completion of the program Program Location Controls Engineering Development Program participants will rotate through at least two manufacturing plant locations during the program. Our North American plant locations are in Ohio, Iowa, Tennessee, Oklahoma, and Massachusetts. These sites produce a full line of appliances including refrigerators, washers, dryers, ranges, ovens, dishwashers, and KitchenAid portables. Reliable transportation is required for travel to work daily as public transportation is not available. Learn more about our Manufacturing locations and the communities where we live & work here! Minimum requirements A Bachelor's degree in Electrical Engineering, Controls Engineering, Automation Engineering, Robotics Engineer, Mechatronics Engineer or a related field. Pursuing a bachelor's degree with plans to graduate before or by May 2026 0-18 months of relevant experience A minimum cumulative GPA of 2.8 Must have indefinite US work authorization. Applicants who require visa sponsorship or work authorization now or in the future are not eligible for this program. For this position, Whirlpool Corporation will not sponsor visas for candidates. Must have access to reliable transportation and be geographically mobile Preferred skills and experiences A strong technical foundation in PLC, HMI, robotics, or vision systems Applies strong analytical and problem solving skills to solve complex problems and make well-informed decisions A natural ability to lead and collaborate with teams to get things done Excellent communication and project management skills Prior internship or co-op experience in a manufacturing environment Connect with us and learn more about Whirlpool Corporation See what it's like to work at Whirlpool by visiting Whirlpool Careers. Additional information about the company can be found on Facebook, Twitter, LinkedIn, Instagram and YouTube. Whirlpool Corporation is committed to equal employment opportunity and prohibits any discrimination on the basis of race or ethnicity, religion, sex, pregnancy, gender expression or identity, sexual orientation, age, physical or mental disability, veteran status, or any other category protected by applicable law.

Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Job Description 3rd Shift Wax Injector Title: WAX COMPONENT INJECTOR Status: Hourly Shift: 3rd, 10:00pm - 6:00am Reporting Relationship: Reports directly to Dept. 610 Supervisor / Wax Process Engineer Location: Mentor, OH Education: A high school diploma or equivalent is preferred, and may be substituted by experience. Personal Characteristics: Able to meet deadlines and be accountable for quality/ quantity. Able to work flexible hours with a history of dependability as demonstrated with strong attendance record. Comfortable using a team approach to problem solving. Have strong sense of urgency. Individual must be a motivated self-starter with the ability to work independently. Maintain a positive work atmosphere by behaving and communicating in a manner that gets along with customers, clients, co-workers and supervisors. Work Experience: Minimum of 1 year experience as an operator in a manufacturing environment. Previous casting experience is a plus. Must have experience with misc. hand tools, tables, racks, boxes, safety guidelines, feeds, grinders, inspection tools, etc. Must have experience with general gaging/calibration, calipers, height stand, bridge gage, etc. Must understand general principals of fluid dynamics, flow, pressure, viscosity, etc. Principal Area of Responsibility: The Wax Injection Technician must be able to perform all operations and operate equipment efficiently in making wax patterns. Production of high quantity /quality parts is required with daily production quota established, works with glue, nail polishes, car wax, china marker, propane torches, hot needle, hot plate, exacto knives, and dental tools. Assist engineering in producing quality patterns. Assist engineering/maintenance on keeping presses running and within spec. Specific Duties: * Incumbent must handle hazardous waste in accordance with the Material Safety Data Sheet (MSDS) and company policy. * Inject all wax patterns, gates and sprues (light and heavy dies). * Keep wax injection presses and melting pots filled with wax at all times. * Clean plugs. * Check quality on all patterns, gating and sprues. * Follow procedures. * Perform other duties as are designated by the supervisor. * Maintain a positive work atmosphere by behaving and communicating in a manner that gets along with customers, clients, co-workers and supervisors. * Keeps work area clean, orderly and in a safe working condition. Follow all safety rules. * Run / supervise engineering trials, wax parameters, pins, cores etc. * Run wax press calibration checks, assist engineering in calibrating presses. * Perform and record basic press inspections, seals, filters, oil, etc. * Ensure EP's/SOP's are correct and followed, reduce operator variability. * Organize work area to optimize quality and throughput. * Any and all additional responsibilities as required or assigned. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.

Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Job Description SUMMARY The co-op student will be working on job assignments related to their functional EH&S discipline. These assignments are designed to supplement their knowledge and experience. Our goal is to provide an effective learning experience. ESSENTIAL DUTIES AND RESPONSIBILITIES *

Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Job Description Responsibilities: * Supervise Lab Technicians, Slurry Technicians * Ensure lab testing, slurry production * Ensure adequacy of related training and quality of tests and inspections * Ensure adherence to related written procedures and work instructions * Monitor, analyze data, and take action to improve quality and productivity of direct reports * Ensure adequate supply of various related raw materials and completion of required receiving inspections * Conduct employee reviews, counseling, and disciplinary action as needed * Ensure communication of material issues and work with quality and engineering to drive resolution * Review and approve quality documentation related to areas of responsibility * Attend and participate in related production meetings * Initiate and implement improvements for departmental safety, quality, productivity, efficiency, and organization of related areas * Ensure ongoing safe work practices in all related areas * Ensure adequate housekeeping and workplace organization based on 6S principles in related areas * Report to Quality or Engineering Manager Qualifications: * BS in Engineering or other technical degree * Prior experience in supervision * Experience with performing or coordinating testing and inspection All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.

Company Profile With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit. PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth. In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp. Job Description Grain Etch Operator - 4th shift Title: Grain Etch Operator Status: Hourly Shift: 4th, 10:30am-10:30pm Positions Available: 2 Company: Precision Castparts Corp. is a worldwide, diversified manufacturer of complex metal components and products. It serves the aerospace, power generation, and general industrial markets. PCC is the market leader in manufacturing large, complex structural investment castings, airfoil castings, and forged components used in jet aircraft engines and industrial gas turbines. The Company is also a leading producer of highly engineered, critical fasteners for aerospace, and other general industrial markets and supplies metal alloys and other materials to the casting and forging industries. PCC Airfoils, LLC is a wholly-owned subsidiary of Precision Castparts Corp. The Airfoils Division manufactures complex highly technical investment casting for turbine engine applications used in commercial jet engines, military jet engines, helicopters and industrial gas turbines. Reporting Relationship: Reports directly to Dept. 650 Supervisor Location: Mentor, OH Education: A high school diploma or equivalent is preferred, and may be substituted by experience. Personal Characteristics: Able to meet deadlines and be accountable for quality/quantity. Able to work flexible hours with a history of dependability as demonstrated with strong attendance record. Comfortable using a team approach to problem solving. Have a strong sense of urgency. Individual must be motivated self-starter with the ability to work independently. Maintain a positive work atmosphere by behaving and communicating in a manner that gets along with customers, clients, co-workers, and supervisors. Individual must also be capable of balancing multiple tasks at once while maintaining good attention to detail. Work Experience: Minimum of 1 year experience as an operator in a manufacturing environment. Previous casting experience is a plus. Principal Area of Responsibility: Under the supervision of the Supervisor, the Grain Etch Operator etches castings, dips castings into caustic baths, fills and assists in the cleaning of caustic units, and performs miscellaneous tasks. Specific Duties: * Using a hoist, immerses castings, revert metal or other materials into a series of acid and water baths, adhering to specified procedures, temperatures, and time cycles. * Removes castings from holders at completion of process and sets aside for removal. * Regularly uses air pressure and water to rinse castings. * Operates controls to regulate temperature of various baths and to adjust electric current used in electrolytic process. * Loads castings into container and operates hoist to convey container into caustic bath adhering to procedure, temperatures, and time cycle. * Removes container from caustic bath and immerses into water rinse for proper length of time. * Rinses castings using water pressure. * Fills caustic bath with caustic soda or other ingredients and helps in cleaning the baths when necessary. * Verification of parts to paperwork * Perform other duties in department as assigned by Supervision. * Keep the work area in a clean, orderly, and safe working condition. * Follows safety practices and policies. * Any and all additional responsibilities as required or assigned. Physical and Mental Demands: * Incumbent must physically and mentally perform the job demands as listed below. * The ability to handle high stress associated with high activity with tight deadlines. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.

The Floating Operator is assigned to work on a variety of tasks throughout the Reflective plant including but not limited to Material Handling, R1, R2, Finishing, Metalizer, Inks and Shipping/Receiving as the primary responsibility. The Floating Operator will support the team in providing flexibility across all areas of the operation to meet production and customer demand. All interested individuals are encouraged to apply for this position. Those currently in the same department (Coating, Finishing, Shipping, etc.) at the hiring location will receive first consideration. They will be reviewed in accordance with the US Hourly Job Bid Policy and evaluated via our shift alignment process. Eligible and qualified applicants outside of the department will be given consideration and invited to interview for the position if there are no selected candidates via the shift alignment process. Further details regarding the job bid policy can be found in ad.a. Please discuss this opportunity with your manager prior to completing an application. Our typical recruiting process takes 2-4 weeks, depending on the current hiring volume and number of applicants. The Floating Operator will provide support to the team in ensuring successful equipment/processes through flexibility, engagement, and collaboration with the operations team. The Floating Operator must provide the flexibility needed and is critical and expected. This is a Continuous operation role on the off shift (2-2-3 schedule) 6:45 AM to 7:00 PM Primary Job Duties and Responsibilities: Essential functions may include, but are not limited to: * Support material handling, R1, R2, Finishing, Metalizer, Inks and Shipping as the primary responsibility, which include (but are not limited to) training/learning the equipment and operating the line * Float on a daily basis to fill vacant positions across the plant to ensure operation is able to run at scheduled capacity. * Serve as a trainer for other employees in the department. * Perform all other duties as assigned by Supervisor * Perform all duties associated with the OTM III roles within the departments stated above: * Load raw material into the machine and unload the product. * Determine and control the machine cycle varying and modifying as necessary. * Perform tests and check product routinely for multiple characteristics using standard measuring devices and making some judgments against not readily measurable standards. * Meet production schedules and program production sequences for optimal productivity. * Follow standard operating procedures and specifications or instructions and guidelines to ensure adherence to production/process specifications. * Report any malfunctions or abnormalities and make minor adjustments and repairs to equipment. * Maintain production records and logs of equipment and product performance. * Follow all health, safety, and housekeeping procedures, policies and practices and consistently work in a safe manner with regard to self, co-workers, and manufacturing systems. * Attend, participate, log and track all required training. * Understand and implement the quality standard procedures that relate to the role and responsibilities of each work cell & department. * Perform general housekeeping tasks and waste removal within the department/group and assists other areas as required. * Continuously review current processes and search out improvement methods to improve product/process quality and reduce waste, rework, and unnecessary work that adds no value to the work or process. * Support safety, quality, and continuous improvement initiatives. * Teamwork: Assist and support other team members in meeting department and site goals. Participate and share in performing all tasks necessary to run the facility. Contribute and participate in team decision making. Provide support in project work and other special requests. * Perform all other functions as necessary. Minimum Requirements: * High School Diploma or equivalent (GED) or 3+ years of relevant manufacturing work experience. * Must be able to follow written and oral instructions. * Must regard safety as a core value; must serve as a role model for other employees and encourage adherence to safety practices, policies and procedures. * Must have strong service and quality focus; address issues effectively when problems arise and take initiative to understand the root cause, then communicate / educate the team in a timely manner. * Must be able to actively contribute in a team based, collaborative environment; encourage open communication and positive interaction with peers and management to effectively reach a common goal. * Must demonstrate proficiency in essential tasks of the job and a willingness to learn and share knowledge; must take initiative to cross-train and sustain acquired skills. * Must complete OJT signoff sheets for each department * Must have demonstrated record of flexibility and dependability in order to support production and customer focus. * Must be able and willing to work overtime, including short-notice requests. * Must demonstrate proficiency with computer applications, especially strong MFG Pro transactional skills. * Previous forklift experience and certification, preferred All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or ********************************** to discuss reasonable accommodations.

Who we are: Remember the last time you opened a bottle of champagne, a cold beer after a hard day's work or a bottle of sparkling mineral water to quench the thirst, well it was probably made by us, we are O-I and we love that we make more glass containers than anyone in the world. O-I has more than a century of experience crafting pure, sustainable, brand-building glass packaging for many of the world's best-known food and beverage brands. We are proud to provide high quality glass packaging for beer, wine, spirits, food, non-alcoholic beverages, cosmetics and pharmaceuticals. Job Description About the role We are currently seeking IT Interns that will be based out of our global headquarters in Perrysburg, OH during the Summer 2026 Semester. As an intern at O-I, you will be offered challenging and diverse opportunities while being supported through a structured learning and development program, with access to a variety of on-the-job activities, networking and social activities. As an ITDP Intern, you will apply your skills in a dynamic team environment, while developing a broad understanding of our IT organization, its internal processes and the applications we support. You can expect to support one or more integral projects that will contribute to O-I's success and shape our future. Throughout your experience, you will acquire and develop skills that supplement your academic work and prepare you for a potential full-time role in O-I's ITDP. Selected projects may support the SAP implementation, architecture teams, applications development and/or infrastructure, depending on your interests and our needs. We'll provide you with a mentor, detailed performance feedback, and the opportunity to work on a team project as well as an individual project. Assuming your successful and interested, it's likely that we'll want to provide you with additional internship opportunities. Qualifications About you & What You'll Bring: You care about sustainability and the planet You're an innovator You're a good communicator You're a challenge seeker You're a good team player You have a a foundation in Information Systems, Data Science, Computer Science, Computer Engineering, or related area: through a Bachelor's degree with targeted graduation date range between December 2025 to December 2026 You have Technical Competency in Microsoft Office Suite, Computer Architecture, Database, Programming, Networking and Project Management You've a record of achievement. We want to see what you've accomplished. Show us examples from school, work or extra-curricular activities Ability to manage multiple tasks and assignments to meet objectives You're legally authorized to work in the U.S. on a full-time basis. (O-I does not sponsor working visas for internships) Additional Information Why Intern at O-I? Work with a global leader in sustainable packaging Gain exposure to real-world supply chain challenges and solutions Learn from experienced professionals and mentors Build your resume with impactful projects and tools Network with peers and leaders across the organization What we offer at O-I? Competitive compensation Opportunity for future growth and advancement Supportive teams to help you grow and learn new skills Are you an innovator, a problem-solver, and someone who thrives on challenges? Do you play to win and want to make a real impact? If this sounds like you, don't wait-apply today and take the first step toward an exciting future! All your information will be kept confidential according to EEO guidelines. O-I is an Equal Opportunity Employer, and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please contact O-I at [email protected] and let us know the nature of your request and your contact information.

Are you a results-driven Materials and Planning Manager looking to lead a dynamic team? In this role, you will be the driving force behind our materials planning, inventory strategy, procurement, and warehouse flow. Your leadership will directly impact customer satisfaction, operational efficiency, and the bottom line. We're looking for someone who thrives in a fast-paced environment, embraces change, and leads with strategic clarity and executional excellence. Relocation assistance available for well qualified candidates outside of the area. We look forward to seeing your application! In This Role, Your Responsibilities Will Be: Lead the Flow: Oversee all aspects of material movement-from receiving to storage, issuing to production, and outbound shipping. Ensure the right materials are in the right place at the right time. Drive Planning Excellence: Build and execute strategic materials and inventory plans that balance customer needs with lean inventory practices. Optimize Supply Chain: Define and improve processes that ensure seamless material and information flow across departments, using data-driven insights to support production schedules and mitigate disruptions. Ensure Accuracy & Control: Champion inventory integrity through cycle counting, audits, and system accuracy, ensuring trust in our numbers. Enhance Purchasing Strategy: Manage tactical purchasing, reduce cost variances (PPV), avoid stockouts, and maintain service level excellence while supporting strategic sourcing decisions Respond with Agility: Adapt inventory levels based on changing customer demand, supply chain constraints, and production needs. Collaborate cross-functionally to ensure proactive planning. Lead with Lean: Be a catalyst for continuous improvement. Drive lean methodologies that reduce waste, improve flow, and increase visibility in material operations. Build a High-Impact Team: Lead, mentor, and inspire a talented team of professionals in planning, procurement, warehousing, and logistics to deliver exceptional results. Who You Are: You readily distinguish between what's relevant and what's unimportant to make sense of complex situations. You actively seek input from pertinent sources to make timely and well-informed decisions. You experiment with a wide range of existing technologies while applying new and emerging options that can enhance organizational outcomes. For This Role, You Will Need: 7+ years in materials management Experience in a Lean manufacturing environment Legal authorization to work in the United States - sponsorship will not be provided for this position. Preferred Qualifications That Set You Apart: 5+ years working in a lean manufacturing environment preferred. ERP System experience Our Culture & Commitment to You At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that phenomenal ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. #LI-BS

As a Repair Service Technician, you will be responsible for diagnosing, troubleshooting, and repairing mechanical, electrical and plumbing tools. The ideal candidate will have previous experience repairing hydraulic, mechanical, and electrical devices and possess strong critical thinking abilities. You should also possess excellent communication skills and the ability to work well within a team. This position offers a progressive pay scale, allowing for advancement based on performance and expertise. In This Role, Your Responsibilities Will Be: Diagnose and troubleshoot mechanical, electronic, and hydraulic issues on a variety of mechanical, electrical, and plumbing tools. Carry out repairs following established procedures and guidelines. Collaborate effectively with other team members to ensure efficient repair processes and timelines. Provide exceptional customer service by addressing inquiries and updating customers on repair progress. Mentor and provide guidance to entry-level technicians. Demonstrated ability to use a computer. Other duties as assigned. Who You Are: You build the customer relationships. You balance planning with actions. You define issues and can map out a process. You solicit both input and discussion. You take positive action after setbacks. You make new connections and build relationships in other areas and teams. For This Role, You Will Need: Ability to read and interpret product manuals and product drawing breakdowns. Working knowledge of computer applications and the capability to read blueprints. Good oral and written communication skills. Good interpersonal skills. Ability to actively take direction from peers and management. Ability to demonstrate familiarity with hand and power tools. Strong critical thinking and problem-solving abilities to diagnose and resolve complex technical issues. Excellent communication skills to interact with team members and provide updates to customers. Ability to work well in a team environment, assisting entry-level technicians and collaborating with more experienced technicians. Preferred Qualifications That Set You Apart: Experience working in a manufacturing environment. Experience working in a customer-facing role. Experience troubleshooting machinery failures. Our Culture & Commitment to You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Why Work in the Greater Cleveland Area Our facility is located in Elyria, OH (our world headquarters), which is conveniently located within driving distance to Cleveland. The area's generally low costs of living, excellent school systems, and low crime rates create a family-friendly environment. The area is home to several growing communities with restaurants, festivals, shopping, and arts scenes that make them exciting places to live and work. About Our Location Since the invention of the modern pipe wrench in 1923, the 25-acre RIDGID world headquarters in Elyria, OH has been developing tools that help trades professionals tackle jobs faster, safer, and more accurately. Today, more than 600 employees work in 734K sq. ft. of office and manufacturing space. The campus is also home to a factory tool service center and a state-of-the-art “schoolhouse” training center that educates and trains hundreds of tradespersons annually. In addition to the iconic wrench, the campus manufactures RIDGID battery hydraulic tools, pipe and electrical tools, and drain cleaning components, as well as Greenlee step bits and knock-out tools. Emerson's Professional Tools business provides the industry's broadest portfolio of advanced, reliable tools and technologies for the mechanical, electrical, and plumbing trades. #LI-BC3

**Requisition ID:** 66398 Whirlpool Corporation (NYSE: WHR) is a leading kitchen and laundry appliance company, in constant pursuit of improving life at home and inspiring generations with our brands. The company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including Whirlpool, KitchenAid, JennAir, Maytag, Amana, Brastemp, Consul, and InSinkErator. In 2023, the company reported approximately $19 billion in annual sales, 59,000 employees, and 55 manufacturing and technology research centers. Additional information about the company can be found at WhirlpoolCorp.com. **This role is for an hourly position. All positions do require a resume to be included.** **We are looking for a skilled tool and die maker to craft dies, mold components, metal tools, and repair molds/dies for our manufacturing facility. In this role, you will be required to interpret design schematics, cut and shape dies, assemble the completed parts, and repair dies / molds in a work bay or in equipment.** **Your responsibilities will include** + **Essential duties include, but are not limited to the following:** + **Work using safe procedures and practices: report any unsafe or hazardous conditions to supervision. Taking safety precautions to protect yourself and others.** + **Uses all designated safety equipment, observes all safety rules, and follows recognized rules of safe practice. Implement 5S.** + **Reading and interpreting blueprints, design schematics, and CAD drawings.** + **Visualizing and computing metal shapes and tolerances.** + **Designing jigs and templates as work aids in the fabrication of parts.** + **Measuring and marking metal stock for machining.** + **Operate mobile equipment (e.g. forklifts, vertical lifts, cranes)** + **Required to make productive maintenance inspections and repairs** + **Welding & metal fabrication (Layout, cutting, bending, drilling, punching and machining)** **Additional Responsibilities** + **Work effectively with your peers to share knowledge and leverage strengths** + **Utilize excellent communication and documentation skills to transfer critical processes and support knowledge to others.** + **Setting up machine tools such as drills, lathes, grinders, and milling machines.** + **Cutting and shaping blocks to specified dimensions.** + **Filling, grinding, and shimming metals to ensure a smooth finish.** + **Fitting and assembling tools and die parts.** + **Inspecting finished dies and tools for defects, smoothness, and contour deformities.** + **Conducting test runs with completed tools and dies / molds.** + **Participate in WCM (World Class Manufacturing) projects and assist in improving machine/die/mold OEE.** + **Other duties as assigned** **Minimum requirements** + **Tool and Die Journeyman's card** + **In place of Journeyman's card** + **Associate's degree in technical studies with 4 years of manufacturing tool and die experience.** **Preferred skills and experiences** **The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.** + **Able to stand for a long duration of time, in excess of 8 hours a day** + **Able to bend over and rotate body repeatedly** + **Able to lift 50 pounds floor to waist** + **Experience working as a tool and die maker.** + **In-depth knowledge of machine tools and their uses.** + **Ability to read and interpret blueprints and design schematics.** + **Extensive experience with metalworking tools including drills, milling machines, grinders, and lathes.** + **Ability to lift heavy objects and operate large machinery.** + **Experience with quality control analysis.** + **Excellent attention to detail.** + **Advanced troubleshooting skills.** + **Google Suite Knowledge** + **PVO license required. (Training provided onsite)** + **Industrial Health & Safety, Confined Space, and Lockout-Tagout Training** + **WCM Methodologies, particularly 5S / Visual Management, Problem Solving and Mistake Proofing** Connect with us and learn more about Whirlpool Corporation See what it's like to work at Whirlpool by visiting Whirlpool Careers (********************************* . Additional information about the company can be found on Facebook (*************************************** , Twitter (********************************* , LinkedIn (************************************************************ , Instagram (**************************************** and YouTube (************************************************* . At Whirlpool Corporation, we value and celebrate diversity. Whirlpool Corporation is committed to equal employment opportunity and prohibits any discrimination on the basis of race or ethnicity, religion, sex, pregnancy, gender expression or identity, sexual orientation, age, physical or mental disability, veteran status, or any other category protected by applicable law.

Org Marketing Statement Parker Hannifin is a Fortune 250 global leader in motion and control technologies and systems, with annual sales of $19.9 billion in fiscal year 2025. For more than a century, the company has been enabling engineering breakthroughs that lead to a better tomorrow in a wide range of diversified industrial and aerospace markets. Learn more at ************** or @parkerhannifin. Position Summary The role has managerial responsibility for Domestic and International Treasury services and indirect managerial responsibility for Treasury matters from the network of Financial Services Managers/Country Controllers and Shared Service Centers. In coordination with and under the direct supervision of the Vice President - Treasurer, this role exercises discretion in all facets of Global Corporate Treasury Services, including consolidated cash, debt, and capital structure. Responsibilities Essential Functions: Management of International and US Treasury Operations: * Manage and exercise discretion over the global cash management program, including all data gathering and analysis, cash concentration, management of investment portfolios and management of short-term borrowing programs. Insure best practices on a continuing basis and compliance with corporate policies. * Manage and exercise discretion over the ongoing liquidity and related funding needs of the operations and corporate functions. * Manage and exercise discretion over the on-going repatriation of capital through distributions from foreign subsidiaries, in cooperation with the Corporate Tax department. * Manage and exercise discretion regarding matters of material capital expenditures and leases. * Manage and exercise discretion over worldwide FX hedging program, interest rate exposures and cross currency swaps. * Manage and exercise discretion regarding matters related to t preparation of material for Executive Management and the Board of Directors, as required. * Manage and exercise discretion regarding matters related to special projects, as required. Under the supervision of the Vice President Treasurer: * Manage and exercise discretion in matters related to relationships with the consolidated bank group and debt rating agencies on a global basis through continual discussions, and in person interactions on an as needed basis. * Manage and exercise discretion in matters related to the global debt portfolio, including SEC filings, negotiation and execution of global syndicated credit agreements, trade Letters of Credit, maintenance of U.S. Commercial Paper program, and inter-company loan portfolio. * Manage and exercise discretion in matters related to developing, planning, recommending, executing and monitoring optimal capital structure for the consolidated entity, and the placement of debt in both U.S. and International capital markets. * Manage and exercise discretion in matters related to planning and executing financing and treasury integration for acquired companies. * Manage and exercise discretion in corporate capital allocation matters including dividends, stock repurchases, and acquisitions and divestitures. * Manage and exercise discretion in matters related to representing Corporate Treasury on inter-departmental project groups for corporate initiatives requiring treasury input. Qualifications Qualifications: * Bachelor's degree required, preferably in Accounting or Finance; MBA or equivalent strongly preferred. * Certified Cash Manager (CCM) or equivalent/advanced Treasury certification preferred; additional professional credentials (e.g., CPA) highly desirable. * Minimum of 10 years of progressive finance experience at the managerial level, with experience in Treasury Operations. * Proven track record of setting clear goals and delivering results within a collaborative, continuous‑improvement environment. * Demonstrated success in recruiting, training, supervising, and developing high‑performing teams. * Strong ethical judgment, excellent written and verbal communication, and superior relationship‑building and presentation skills. * Commitment and interest in long‑term advancement into senior finance leadership roles (e.g., VP - Treasurer). * Willingness to travel internationally as required. * Multilingual proficiency (oral and written) is highly preferred. Equal Employment Opportunity Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations. ("Minority / Female / Disability / Veteran / VEVRAA Federal Contractor") If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants | U.S. Equal Employment Opportunity Commission

We are seeking a dynamic and experienced Electric Actuation Subject Matter Expert (SME) to lead growth initiatives across the Americas for Emerson's Actuation Technologies Business Unit. This individual will bring deep expertise in selling and servicing electric actuators, application engineering, and technical product knowledge to drive competitive displacement and implement strategic market penetration plans. The SME will collaborate with the sales organization to deliver impactful product training, develop tailored application solutions, and provide technical support to customers, while also partnering with the Product Management Team to ensure product development aligns with evolving market demands. This role offers location flexibility within the United States and reports directly to the Americas Sales Director. **In this Role, Your Responsibilities Will Be:** + Drive order growth into new and diverse markets for Actuation Technologies. + Strengthen distribution channel partners' proficiency in selling and servicing electric actuators through varied training formats. + Develop MRO business by demonstrating the installed base via regular site visits and walk-downs. + Capture customer and competitor intelligence to generate sales leads and displace competition. + Accelerate growth through obsolescence planning, upgrades, retrofits, and competitive displacement programs. + Promote Actuation Technologies' products, solutions, and services by participating in trade shows, fairs, and conferences. + Support field service teams with testing, troubleshooting, disassembly, repair, and reassembly of electric actuators. + Collaborate with Internal Sales and product support teams to ensure customer satisfaction, represent the voice of the customer, and uphold business ethics, Go Boldly culture, and trade compliance standards. **Who You Are:** You deal constructively with problems that do not have clear solutions or outcomes. You evaluate pros and cons, risks and benefits of different solution options. You build and deliver solutions that meet customer expectations. You persist in accomplishing objectives despite obstacles and setbacks. You create teamwork allowing others across the organization to achieve shared objectives. **For This Role, You Will Need:** + 3+ years of proven electrical actuator sales experience with trackable results + Demonstrates mechanical and electrical troubleshooting proficiency + English language proficiency for professional presentations and communication + Ability to deliver clear and engaging presentations to customers or teams + Growth minded individual with strong selling and results oriented focus + Ability to collaborate, influence and execute across matrixed organizations + Attention to detail and ability to handle multiple priorities + Travel up to 75% + Legal Authorization to work in the United States - sponsorship will not be provided for this role **Our Culture & Commitment to You** At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. \#LI-AN1 **WHY EMERSON** **Our Commitment to Our People** At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. **Work Authorization** Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. **Equal Opportunity Employer** Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. **Accessibility Assistance or Accommodation** If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . **ABOUT EMERSON** Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! **No calls or agencies please.** **Requisition ID** : 25024883 Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

We make what matters work. You want to make an impact in the world. At Eaton, we're solving some of the toughest challenges on the planet. Our Early Talent Programs open up an exciting world of opportunities for you to make a difference on a global scale. Your assignments are more than tasks and busy work; they're your chance to drive innovation in intelligent power management and shape the future of our company. You'll team up with seasoned leaders, gaining diverse experiences that'll drive you forward to define and reach your career goals. What sets our Early Talent Programs apart: * Personalized Program Experience: We're committed to energizing your career and empowering your impact. No two participants share the same experience or set of responsibilities. * Global Perspectives: Diverse work locations and comprehensive customer portfolios are a required part of the adventure, enhancing your learning and maximizing program benefits. * Role Exploration: Gain insight into various careers within Eaton through extensive services that ensure safe, efficient, and reliable power systems at every stage. * Strategic Networking: Benefit from networking and mentorship opportunities within one of North America's largest and most experienced power distribution service organizations. * Tangible Learning: See firsthand how Eaton is powering the future of Power Distribution through real world application and customer service. It's time to make connections, get energized, and power ahead. Eaton provides a competitive total rewards package commensurate with applicable skills, knowledge, and experience and consistent with internal and external market practices. The hourly salary for this role ranges from $20.77 - $25.96 per hour for those enrolled in bachelor programs and $34.62 per hour for those in a master program. What you'll do: Position Overview: The Electrical Engineering Services and Systems global service team is one of the largest and most experienced teams of power system professionals in the industry. As one of our engineers, you'll help to provide solutions to our customers' power problems at every stage of the power system. The Digital Integration Solutions (DIS) group is a full-service systems integrator with the capabilities to integrate the necessary equipment and technologies, to provide a complete, power automation solution. This team of engineers and technicians brings extensive skills and experiences with a variety of leading HMI software packages enabling us to design graphically rich, easy-to-use operator interfaces that take advantage of the latest standalone or web-based technologies. Our experience transcends a multitude of equipment manufacturers, software packages, and network architectures, including all major OEMs HMI's and components. We offer single point responsibility, a high level of engineering and systems integration expertise, and a unified focus on cost effective solutions, seamless integration, HMI development, energy management tools, and professional turnkey system design and implementation. In this internship, you will: * Use modern project and program management tools and techniques to aid in the execution of projects related to the engineering, procurement, and construction of electrical power monitoring systems (EPMS). * Provide on-site implementation of Power Management and mission critical monitoring and control systems including Power Xpert, Foreseer, PowerNet, and next generation Power Monitoring platforms * Provide applied engineering and consultation to customers in the areas of system integration, installation, start-up, maintenance, repair, training and modification of power management, control, and mission critical systems. This internship will help prepare you for both technical and future leadership roles at Eaton. As an intern, you will be provided with a structured training and development curriculum; a blend of instructor-led, virtual classrooms, eLearning courses, and on-the-job training provided by expert mentors and team members to assist you in developing your career. Qualifications: Required (Basic) Qualifications: * Actively enrolled or received a degree in a bachelor's or master's program with a focus in engineering from an accredited institution * Minimum overall cumulative GPA of 2.8 * Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc. * Must be geographically flexible to relocate within the United States * Must have a valid driver's license and be able to pass a Motor Vehicle Record (MVR) check Preferred Qualifications: * Actively enrolled in a bachelor's degree program in a technical (Electrical/Computer Engineering, Computer Science) engineering program from an accredited institution * Overall cumulative GPA of 3.2 or higher * Demonstrated leadership experience within campus and/or the community * Prior electrical/power industry related experience Skills: Position Criteria: * Location will be in one of five major regions within the United States (i.e. Central, Northeast, Southeast, Gulf and West regions); typically in or near a major U.S. city * Transportation to and from the worksite, and for incidental business travel, is the responsibility of the intern. * Strong analytical, computer, writing and presentation skills * Performs physically demanding tasks, requirement to stand, walk, stoop, squat, kneel, and reach above, to, and below shoulder level, lift, carry, push, pull, and use hands to handle and feel. Frequently required to climb and regularly required to lift/carry/push/pull up to 50 pounds; occasionally required to push/pull greater than 50 pounds with assistance. May be required to drive extended distances, work in extreme weather and temperature conditions, work at sites with areas that have poor lighting, ventilation, and dust and/or be exposed to high noise levels. * This role may include up to 25% travel within a local region. * Successfully complete and maintain compliance with Eaton's safety program and policy; This includes role-applicable portions of the EESS Qualified Electrical Worker (QEW) program and any required annual re-certifications thereafter. * The summer internship culminates with a formal presentation where participants showcase their success stories to leaders of the organization and receive feedback on their performance. #earlytalent We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton considers qualified applicants regardless of criminal histories, consistent with local laws. To request a disability-related reasonable accommodation to assist you in your job search, application or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Basic Job Functions: As Steel Detailer/BIM Modeler, you will be responsible for detailing all parts of metal building systems, including structural steel, wall and roof panel, and trim to ensure all components fit together correctly as part of a complete design solution. This will include: Creating construction drawings using our highly specialized software Generating and verifying fabrication drawings and reports Generating bill of materials for field construction Designing and troubleshooting standardized steel framing conditions with project specific requests Ensuring a quality product by thorough contract and design coordination Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times. Minimum Qualifications: High School or General Equivalency Diploma Experience or training utilizing 3D modeling Candidates must be legally authorized to work in the United States without the need for sponsorship both now and in the future. Nucor will not provide sponsorship for this position. Preferences: Associates degree with focus in Architecture or Construction Management Training or experience with Building Information Modeling (BIM) software such as Tekla Basic knowledge of standard construction practices Experience detailing metal buildings or working at a Metal Building manufacturer