Presrite jobs - 10,008 jobs

Since 1971, Presrite Corporation has been providing world class forging solutions to our customers. We have three modern manufacturing plants plus a dedicated technical division for our engineering and die making capabilities, all centrally located in northeast Ohio. Press sizes range from 1,300 to 6,000 tons, forging approximately 125,000 tons of steel annually. Forgings we provide range from 2 to 300 pounds, all produced to the latest International quality standards. Our customers span many diverse markets: off-highway, agriculture, military, rail, oil and mining--just to name a few. Presrite has helped our world move uninterrupted, one forging at a time, for over 50 years. If you are looking for a role in an innovative and industry leading company, we have a great opportunity for you. We are currently seeking qualified candidates for the Maintenance Manager position at our Jefferson, OH forge operation, reporting directly to the Plant Manager. JOB SUMMARY: The Maintenance Manager is responsible for ensuring equipment is in proper working condition at all times, with an emphasis on reducing unexpected and repeat failures. This position reviews operation of plant equipment and systems, to minimize unplanned downtime, and identifies opportunities for improvement through data analysis. MAJOR JOB RESPONSIBILITIES (not all inclusive) • Manages and implements a plant maintenance program based on the Presrite Strategic Asset Maintenance Program and maintenance and reliability best practices, with emphasis on planning/scheduling and preventative/predictive maintenance principles • Coordinates maintenance activities with Plant Operations and communicates directly with the operations department to coordinate maintenance and repair work in process areas • Tracks, analyzes and improves key maintenance metrics such as Schedule Attainment, Preventive Maintenance Completion (PMC) and Preventive Maintenance On Time Completion (PMoC) in alignment with the Presrite Strategic Asset Management Program • Build up and maintain clear communication and close co-operation with all relevant internal stakeholders (plant staff, corporate Maintenance, Automation and Reliability Managers, engineering) and external Stakeholders (including customers) • Generate and implement ideas that improve safety, quality, and cost indicators, in line with investment & service goals. • Ensure maximum plant availability through the implementation and use of established reliability principles and optimal asset management as spelled out in the Presrite Strategic Asset Management Program • Responsible for equipment maintenance (Presses, Furnaces, Conveyors, etc.), and the overall building and facilities maintenance (Reliability, Performance, Cost) • Responsible to manage a team of Maintenance Technicians • Ensure adherence to all Health & Safety procedures • Attains and Maintains CMRP Certification. • All other duties as assigned. Requirements · Bachelor's Degree in Industrial Maintenance, Engineering, Management or related field; or technical certification in combination with work experience. · Minimum of 10 years Industrial Maintenance experience; at least 3 years experience in a maintenance leadership role, with experience in preventive maintenance, CMMS, and troubleshooting preferred. Experience leading teams and performing predictive and preventive maintenance is required. · CMRP certification is desired. · Demonstrated proficiency in creating and working with documents in Microsoft Word, Excel, PowerPoint, and MS Project. · Knowledge of lean manufacturing and continuous improvement methods. · Adherence to policies, procedures, and work instructions. · Ability to collaborate with diverse work groups and floor associates. · Excellent time management and leadership capabilities. No phone calls or third-party recruiters, please. Employment Ready Applicants Only. The above information on this description has been designed to indicate the general nature and level of work. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of an associate assigned to this position. Presrite is an Equal Opportunity Employer. Employment contingent upon successful completion of background investigation. Pre-employment drug screening is required. The Company participates in E-Verify. E-Verify is an internet-based system that compares information from an employee's Form I-9, Employment Eligibility Verification, to data from U.S. Department of Homeland Security and Social Security Administration records to confirm employment eligibility. *********************

$2000 retention bonus paid within 1 year of employment (based on performance and eligibility) Route Sales Representatives are critical to our success at FritoLay! Our Route Sales Representatives are responsible for delivering, selling, and merchandising FritoLay's complete line of products including Lay's, Doritos, Cheetos, Tostitos, Fritos, and many more to local stores including gas stations, dollar stores, and large grocery stores. As a Route Sales Representative, you drive a FritoLay truck to different stores, work independently to unload orders, merchandise product, and partner with store managers to increase sales, order, and maintain records throughout the day. Although you will start out as a Route Sales Representative for FritoLay, we are investing in helping you grow with us. This job can open the door to career opportunities with us or our parent company, PepsiCo. In this role, here are some of the frequent tasks you will be doing: Learn the basics of the role in four to six weeks of dedicated driving and selling training with our amazing team members Run routes for team members', experience different stores, and meet new customers Grow sales on the route by building relationships, selling in displays, and completing national initiatives Attain a route with set days off/schedule with time Work in a fun, fast paced, and physical environment We operate 24 hours a day, so you may not have a typical schedule! Team members often work weekends and holidays. Our jobs are physical! If you have never worked in this type of role before, you should understand that you will be on your feet for the entirety of your shift. Here are the minimum qualifications of this job: Be 21 years of age or older Have a valid driver's license with proof of insurance and ability to obtain other licensures as required by state law Be able to frequently lift 40 lbs. with or without a reasonable accommodation As a full-time team member, you will be eligible to receive full company benefits. You can learn more about our benefits on our career site, but here are some of the benefits we offer: 401(k) contribution Health, dental and vision insurance Financial support to help obtain a degree Company discounts and perks Our application takes 20-25 minutes to finish on any device. Our mission is to get you in for an interview instead of jumping through hoops. Just keep an eye on your e-mail, and we will take care of the rest. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. PepsiCo is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / Sexual Orientation / Gender Identity Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901 - 4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance. If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law & View the PepsiCo EEO Policy.

Invest in Your Success with Mac Tools Are you ready to be your own boss and build a thriving business? Mac Tools offers a unique opportunity to own and operate a successful franchise. With a strong credit profile and the right financial foundation, you can unlock the potential to achieve financial independence and a fulfilling lifestyle. As a Mac Tools franchisee, you will enjoy the freedom and flexibility of running your own business without the overwhelming burdens of startup. Mac Tools offers a family-oriented culture; supported by Stanley Black and Decker - the largest tool company in the world - giving you the best of both worlds. Key Benefits of Mac Tools Franchise Ownership Exclusive Territory: Build a loyal customer base in your protected territory. Mac Tools currently has over 1,250 existing franchisees with opportunities available in all fifty states, including Puerto Rico and across Canada. Proven Business Model: Benefit from an award-winning system that has earned accolades including Fastest Growing Franchise, Top 100 Franchise, Franchise 500, and more. World-Class Training: Gain the skills and knowledge you need to succeed via classroom and field-based sales training at our headquarters. Ongoing Support: Receive continuous guidance and assistance, including national marketing support with motorsports branding, sales flyers, videos, etc. Strong Brand Recognition: Leverage the brand power of Mac Tools and Stanley Black and Decker - the largest and fastest growing tool company in the world. Financial Flexibility: Explore various financing options to fit your needs. Financial Requirements To qualify for a Mac Tools franchise, a strong credit profile and an initial down payment are essential. Your financial strength is a key factor in our franchise approval process, and we have lower start-up costs than many other franchise opportunities with a variety of financing options. Our Veterans Program offers vets or their spouse credits of up to $25,000 towards inventory purchases. Ready to Take the Next Step? Are you a qualified entrepreneur ready to invest in and operate a Mac Tools franchise? Complete our quick mobile application to start your journey towards financial independence. Our team can get you scheduled for one of our free Discovery Days, providing the opportunity to meet current Franchisees and experience the business first-hand. Mac Tools , a division of Stanley Black & Decker Inc. 5195 Blazer Parkway Dublin, Ohio 43017

We are seeking a Process Technician to support operations at a single manufacturing site and across customer locations. This role is critical in ensuring smooth onboarding of new jobs, validating processes handed off by R\&D, and maintaining sustainable production practices. Additionally, the Process Technician will provide technical support to ensure products remain in spec, lead quality and efficiency improvements, and assist with new product development initiatives. The ideal candidate will be highly organized, detail-oriented, and skilled at translating technical requirements into practical, repeatable processes while responding quickly to production challenges. Why work at MCC: Competitive Compensation Generous benefits package including medical, dental, vision, disability, life insurance, and 401(k) Paid Holidays: New Year's, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating Holidays Key Responsibilities: Job Onboarding: Lead the introduction of new products or jobs into production, ensuring readiness and alignment with plant capabilities. Training & Support: Develop and deliver training for floor personnel on new processes, equipment, and best practices. Process Validation: Confirm that R\&D handoffs are feasible and sustainable for long-term production. Technical Support: Provide proactive and reactive support to operators, ensuring products remain in spec and resolving issues quickly. Documentation & Standards: Create and maintain detailed process documentation, SOPs, and quality standards. Trials & Testing: Plan and execute trials to validate processes, troubleshoot issues, and optimize performance; conduct lab evaluations and comparative analysis with competitive products. Continuous Improvement: Identify opportunities to streamline workflows and enhance efficiency in label manufacturing and related operations. Customer Interaction: Support customer and MCC-sponsored new product development projects; participate in coater trials and customer visits, occasionally requiring on-site work across shifts. Quality Oversight: Maintain lab/testing equipment and calibrations; initiate raw material complaints (SNAR), track corrective actions, and manage quality holds. Qualifications: Bachelor's degree in engineering or related field (or equivalent experience); 2- or 4-year degree or 2-4 years of related experience/training acceptable. Experience in manufacturing environments, preferably in labels or similar industries. Strong problem-solving skills and ability to manage multiple priorities. Math skills (including Algebra) and knowledge of printing/converting materials and technologies. Excellent communication and training skills; ability to write reports, business correspondence, and procedure manuals. Ability to travel for internal and customer visits and trials. Other Considerations: Occasional lifting of rolls/samples up to 40-45 lbs. Work around coating and slitting equipment; safety shoes may be required. Professional attire for customer visits; flexible hours for multi-shift coverage. #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding ExpertTM for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Req ID: 26432 PURPOSE: Electrically troubleshoot, repair and maintain complex production equipment and systems. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts, on-call. Daily work activity is directed by the Group Leader and a Machine Repair electrician A. Reports directly to the department Manager. JOB DESCRIPTION (DUTIES AND RESPONSIBILITIES): Performs all task under general supervision. Provides training and assistance to less experienced Electricians. Assumes high level ownership during off-shift work periods related to work prioritization, production needs, and safety requirements. Troubleshoot, inspect, adjust, and repair automated machines, process systems, and robotic systems to ensure they are working properly and safely. Performs preventative maintenance and repairs on equipment and systems (e.g., mechanical, electrical). Evaluates and recommends equipment improvements to improve availability, capability and yield. Performs equipment failure analyses (including preventative and unscheduled maintenance). Assists engineers in operating test equipment to obtain performance data on parts and assemblies under varying operating conditions. Collects, compiles and summarizes test data, and reviews results with engineering to resolve problems such as product or equipment issues, malfunctions and incomplete test data. Diagnoses test equipment malfunctions, and services and repairs equipment as required. Diagnose malfunctions and analyze results using testing devices, then repair and replace broken machine components Troubleshoot, repair, inspect, and maintain combustion systems. Responsible for continuing education to keep up with changing technology. Configure, commission, and test new equipment while making sure all maintenance and installations are well-documented, working properly, and operating safely. Document repairs for regulatory purposes. Perform bench work in repairing and maintaining production equipment and spare part assemblies. Oversee maintenance contract and service work as assigned. Order and maintain spare parts. Assist with keeping neat and orderly records on work performed. Work with Engineering, Production Team Leads, Manager, Group Leaders, and coworkers to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, ability to be on-call and must be able to work weekends, off shifts, and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Assist in procedure/equipment upgrades as necessary. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager. May be asked to rotate between Mentor and Euclid facilities based on job training requirements. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. BASIC REQUIREMENTS: Must have successfully completed an Electrician Apprentice Program, an Associate degree/certificate in Electronics/Electrical Technology, or have equivalent job experience. Must pass the skilled trade assessment test for this position. Must have a basic knowledge of electrical troubleshooting. Some knowledge of combustion and/or hydraulic systems may be required. Must have a basic knowledge and experience in relay logic, industrial controls, electronics, and PLCs. Must have a basic level of knowledge and experience reading electrical schematics, wiring diagrams, ladder logic, and engineering drawings. Must have a basic ability to use a computer to communicate with machine control systems and PLCs. Must have a basic ability to diagnose the root cause of a problem, make repairs, and test for proper operation. Ability to use various measuring devices (multi-meter, oscilloscope, megohmmeter, etc.) Excellent attendance required. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Be mechanically inclined. Must be able to work in confined areas, climb ladders, and work at heights of 30 feet. Must be able to wear a respirator. Must be able to distinguish colors used in color-coding wires and electronic components. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Position: Day/Evening Rotating Nurse (Combination of 8, 10, and 12-hour shifts) D/E rotating, call as needed, weekend as needed. Not guaranteed 4 10s. We prefer RNs rated 3-4 in neuro, thoracic, ENT, ortho, general, plastics, urology, GU/GYN, free flaps, and robotics (Da-Vinci). Experience in oncology is also preferred. Monday to Friday: Shift options: 06:30 - 17:00, 6:30 - 19:00 or 10:30 - 20:30 This position requires a full-time commitment of 40 hours per week, which may be fulfilled through one of the following schedule options: Four 10-hour shifts (4x10s) Five 8-hour shifts (5x8s) Two 8-hour shifts and two 12-hour shifts (2x8s + 2x12s) *Please note that the schedule will be a combination of the above three shift options and will vary based on unit need.* Call: typically, staff sign up for 2-3/4-week schedule period. Depending on her shift, it may be requested to pick up the following calls- Evening-1500-2300 Night 2300-0700 Weekend 0700-1900, 1900-0700 Qualifications: Minimum of 2 years of experience required BCLS certification required Required skills: Circulate and scrub experience EPIC experience required Key Responsibilities: Provide high-quality nursing care in a day/evening rotating schedule. Assist with circulating and scrubbing as needed. Maintain accurate patient records using EPIC. Collaborate effectively with the healthcare team to ensure optimal patient outcomes.

Human Resources Manager - West Salem, OH Here at Associated Materials, LLC, we foster a culture that embraces our Values: AMazing Together; AMaze our customers; Innovate AMazingly; and AMazing Results. At all levels of the organization, we bring our values to life, speaking the truth and leading with trust. We embrace our humanity and the power to make a difference. Our HR team members are key members for driving the AM values. Position Overview: We are recruiting a Human Resources Manager to drive people and process transformation for our manufacturing site in West Salem Ohio. The HRM role will be responsible for the West Salem Ohio plant of approx. 100 employees. Initiative, integrity, accountability, ownership, and disciplined workforce development will be key differentiators in both the selection process and the successful execution of the roles and responsibilities of this key position. This role requires the ability to think strategically, acting at a detailed level to support the employees and the business. This role will also work across the sites on various projects for best practices and HR standardization. In general, this position is a key member of the operations and is responsible for effective and successful people and process management discipline and communications for non-exempt and exempt employees. This includes but is not limited to employee relations, staffing, employee engagement, leadership coaching, performance management, workforce analysis and reporting, and HR compliance. Partners with employees and management to communicate various human resource policies, procedures, laws, standards, and other government regulations. Responsible for effectively identifying, investigating, and resolving employee relations issues, resolving complex labor and human capital challenges. Implement standard AMI processes and tools that foster higher productivity and improved retention of workforce. Support employee relations by documenting issues and escalating as needed. Proactive involvement with Union representatives and responses to grievances for the West Salem Union. Ensuring compliance with HR policies and practices, as well as complying with federal and state employment laws and regulations. Interpreting labor agreements and providing counsel to Management on contract interpretations and implementation for West Salem. Work on best practices projects across the AMI sites with the HR team Manage leadership team's staffing and development. Work with the Talent Acquisition team to recruit salary and hourly candidates to join the AMI team. Effectively recruit, train, and develop highly productive candidates motivated to achieve business objectives. Coaching, counseling and helping employees and all levels of management in employee or management issues relating to promotion, termination, or disciplinary action. Responsible for providing analytical and project management support. Influencing skills to manage plant or organization changes. Facilitates onboarding activities. Provides communication of programs and drives resolution of issues related to employee concerns regarding payroll, benefits, and other employee programs. Maintains employee data in various systems and tools. Actively participates in plant teams/committees and assumes leadership role in HR related issues. Promotes and reinforces the AMI Values and culture. Drives the plant engagement actions for cultural improvements. Performs monthly data reporting for the facility. Qualifications Bachelor's or master's degree in human resources, labor relations, psychology or business is required. A minimum of three years of HR experience + progressively responsible experience leading people to accomplish a mission with integrity and teamwork. Demonstrated strong HR business partnering and influencing skills. Union relations and contract negotiations experience preferred. Detail-oriented with demonstrated project management and strong analytical skills. Strong employee relations experience, Positive employee relations experience a plus. Excellent communications (verbal and written) and interpersonal skills. Experience in employee relations, organizational development, coaching, hourly compensation, training, change management and HR program implementation. Demonstrated ability to work with minimal supervision and to successfully complete projects and initiatives in required time frames. Must have the ability to work in a fast-paced, ever-changing environment as well as being an effective team player. Legal authorization to work in the United States - sponsorship will not be provided for this position. Some experience in payroll and attendance systems (ADP) is a plus. Strong PC knowledge and skills: Windows, Word, Excel and PowerPoint. Experience in a manufacturing setting About Associated Materials, LLC: Associated Materials, LLC, is a leader in the building products industry with a focus on quality, innovation and customer success through its three businesses: Associated Materials Innovations, Alside and Gentek Building Products. With a combined revenue of $1.7 billion, these businesses are market leaders in vinyl windows, cladding, metal siding, trim and other essential building products for residential, light commercial and multifamily projects. Our commitment to operational excellence drives growth for our customers. Learn more at*************************** Headquartered in Cuyahoga Falls, Ohio, more than 4,000 associates across North America support Associated Materials, LLC. We operate 11 manufacturing facilities and more than 100 Alside and over 20 Gentek supply centers across the United States and Canada. Through our unique combination of award-winning products, manufacturing and distribution operations, installation solutions, and support services, the opportunities at Associated Materials are endless! Associated Materials ... Building Products Better Associated Materials, LLC. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, ancestry, age, disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance. We also make reasonable accommodations for disabled employees and applicants, as required by law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding ExpertTM for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Maintenance Req ID: 27262 Purpose Mechanically troubleshoot, repair and maintain industrial vehicles andemergency stationary engines. Primarily 1st shift schedule, could include 2nd, 3rd, splitshifts, weekends, holidays, 12 hour shifts, on-call. Daily work activity is directed by the Group Leader and a Fleet Mechanic A or B. Reports directly to the department Manager. Job Duties and Responsibilities • Performs all tasks under direct supervision. • Troubleshoot, repair, inspect, and maintain industrial vehicles and emergency stationary engines. • Perform bench work in repairing and maintaining fleet equipment and spare part assemblies. • Performs preventative maintenance and repairs on equipment and systems (e.g., mechanical,electrical). • Evaluates and recommends equipment improvements to improve availability and capability. • Performs equipment failure analyses (including preventative and unscheduled maintenance). • Troubleshoots and diagnoses equipment problems. • Maintains, troubleshoots and repairs facilities mechanical components and electrical equipmentand systems in accordance with SOPs (standard operating procedures), internal requirements,manufacturer's specifications and safety policies. • Performs miscellaneous manual labor activities (e.g., sweeping and cleaning floors and workareas, picking up papers and refuse from grounds, assisting in the handling of heavy materials,making minor repairs, mowing lawns, and shoveling snow). • Oversee fleet maintenance contract and service work as assigned. • Order and maintain spare parts. • Assist with keeping neat and orderly records on work performed. • Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellowtradesmen to accomplish the desired result. • Adjust schedule and work hours to accomplish the desired result, ability to be on-call and mustbe able to rotate shifts and work weekends and holidays as required. • Perform work assignments efficiently while being consistent with good safety practices. • Assist in procedure/equipment upgrades as necessary. • Report any maintenance and/or safety issues to supervisor. • Review, understand, and follow all Company specifications and procedures, and regulatory rulesand requirements that are associated with the performance of this job. • Other duties as assigned by the department Manager. • Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Job Requirements • Associate degree or Certificate in a mechanical technology is preferred. • Must pass the skilled trade assessment test for this position. • Must have some knowledge of mechanical troubleshooting including power transmission andfluid power. • Must have some knowledge of fleet electrical troubleshooting. • Must have some level of knowledge and experience reading mechanical drawings and servicemanuals. • Must have some mechanical aptitude and the ability to work on close tolerance equipmentand/or parts. • Ability to use various measuring devices (torque wrench, micrometers, Vernier calipers, dialindicators etc.). • Ability to fabricate, weld, or machine parts may be required. • Excellent attendance required. • Must possess good organizational and communication skills. • Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. • Capable of lifting up to 75 pounds on an occasional basis. • May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) • Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. • Must be able to wear a respirator. • Must be willing to continuously improve technical skills and knowledge. • Must be able to understand and interpret the specifications and procedures related to this job. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Assist with training new employees-Performs other duties as assigned. Delivery Driver, Driver, Delivery, Restaurant

The Horsburgh & Scott Company is a leading manufacturer of industrial gears and custom gear drives, boasting nearly 135 years of engineering and manufacturing expertise. Our commitment to quality and innovation ensures that we deliver the highest quality gearing products and services to our customers. To learn more about our Company and capabilities, visit our website Horsburgh & Scott | Gear Manufacturer and Gearbox Repair. Job Summary The primary function of the Estimator is to provide accurate pricing information for the design and production of our industrial gears, gear drives or gear repair services. Upon receiving a project request, the Estimator will review and analyze all customer supplied data, including technical and design specifications necessary to complete the project. The Estimator will accurately determine the raw materials, engineering, manufacturing, logistic, and other costs necessary to complete the project to specifications and provide the customer with an accurate quote on price. Primary Responsibilities Review the project request with the customer and/or salesperson. Review all customer supplied drawings, specifications, data, etc. For repairs, evaluate gearbox to determine necessary repairs and scope of work. Determine preliminary designs and specifications. Develop cost estimates based on the data supplied by the customer to include all preliminary design work, materials, production costs, etc. Review customer purchase orders to ensure they reflect the quote in accurate, up to date and meets the customers' expectations. Submit quote to customer in conjunction with the H&S sales team. Assist with overall workload within Applications Engineering to meet customer needs and department schedules. Qualification and Experience B.S. Mechanical Engineering or B.S.M.E.T. or equivalent work experience. Knowledge/experience with metal machining and manufacturing processes. Experience in the mechanical drive/power transmission industry preferred. Strong written and verbal communication skills. Computer literate with MS Office applications; design experience with Solid Works a plus. Superior time management skills; capable of handling multiple priorities. Strong problem-solving skills. Able to perform the essential functions of the position with or without accommodation.

Since 1907, ParkOhio Holdings Corp. (NASDAQ: PKOH) and their subsidiaries have provided the strategic services and products that allow the world's leading manufacturers to streamline their manufacturing processes and focus their core competencies on production of more efficient and high-quality products. ParkOhio is an industrial supply chain logistics and diversified manufacturing business operating approximately 125 manufacturing, distribution and service facilities and employing approximately 7000 people worldwide. Revenues are in excess of $1.6 billion with a customer base consisting of many of the Global 2000 infrastructure and business/personal/household products companies. ParkOhio operates through three reportable segments: Supply Technologies, Engineered Products and Assembly components. For more information: **************** The Engineered Products Group (EPG) is a diverse group of manufacturing businesses designing and manufacturing a broad range of highly engineered products. These products include induction heating and melting systems, tube & pipe threading and bending systems, forge and forming presses, and forged and machined components. The Industrial Engineered Group (IEG) is a sub-segment of the Engineered Products Group that focuses on the induction heating and melting business through global brands like Ajax TOCCO Magnethermic, GH, Lectrotherm, SAET, Pillar. IEG designs and manufactures world-class equipment for the foundry, heat treating, bar & tube (OCTG & API), steel processing, strip heating, forging & forming, and vacuum induction melting industries. The induction business also provides various services, including laboratory process development, preventative maintenance, equipment repair and parts, coil repair facilities, and installation services. Additionally, the IEG group includes pipe bending and threading with global brands like Colinet and PMC. The entire group is made up of more than 30 sites globally and is approximately $325M in annual sales. These companies are in a sub-segment of the Engineered Product Group, one of the three reportable segments of ParkOhio. Position Summary: The Vice President of Human Resources will lead all global HR strategy and operations for IEG across EMEA, China, Latin America, and North America. This executive will oversee a global workforce of 1,500+ employees and a distributed HR team, partnering directly with the IEG President and senior functional leaders. This role requires a proven HR leader with extensive global manufacturing experience, strong capability in engineering-centric businesses, and a track record of building and executing HR strategies that deliver measurable business results. Job Duties: - Lead the global HR function across 30+ sites, including talent management, organization design, leadership development, workforce planning, employee relations, and total rewards. - Partner with the President and executive team to shape organizational strategy and build HR capabilities aligned to growth and operational goals. - Manage and develop HR teams in distributed locations, ensuring alignment, capability building, and consistent global execution. - Build scalable HR programs such as performance management, succession planning, and leadership development that drive measurable improvements in capability, retention, and business performance. - Ensure compliance with employment, labor, and HSE regulations across multiple jurisdictions. - Act as executive-level advisor on workforce, culture, talent risks, and organizational design. - Lead HR components of M&A due diligence, integration, and organizational transitions. - Manages relationship with PKOH and provide information to corporate as required. - Maintains strict confidentiality and data integrity. What you need to be successful: - Bachelor degree in Human Resources or related field of study. - 10 + years in Human Resources leadership role leading HR teams at scale in multi-site manufacturing environment. - Proven success leading HR in global regions such as EMEA, China, and Latin America - Experience with an enterprise level HCM. Preferred Qualifications: - Graduate studies in Human Resources - SPHR certification We offer a competitive benefits package which includes medical, dental, vision, life insurance, 401(k) and more. ParkOhio provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

The Horsburgh & Scott Company is a leading manufacturer of industrial gears and custom gear drives, with 140 years of engineering and manufacturing expertise. Our commitment to quality and innovation ensures that we deliver the highest quality gearing products and services to our customers. To learn more about our Company and capabilities, visit our website at Horsburgh & Scott | Gear Manufacturer and Gearbox Repair. Primary Job Functions: Perform engineering functions for custom design products. These functions will include (but are not limited to: Gear tooth geometry analysis and ratings. Shaft deflection analysis. Bearing life analysis and selection. Lubrication system design. Housing design. Gear drive layout. Assembly and testing notes. Review and approve drawings from designer detailers for release to the shop. Enter requisition text for major raw material items into BaaN system for purchase. Secondary Job Functions: Point contact for technical communications (post order) with customers and sales personnel. Disposition Nonconforming Material Reports (NMR's). Issue Engineering Change Notices (ECN's) when appropriate. Support shop / assembly when questions or issues come up. Create detail drawings when necessary. Other functions as required by management. Qualifications: B.S. Mechanical Engineering. Minimum of five years' experience in linear/rotational machine design a must (experience within gear industry preferred). 3-D modeling experience, Solid Works experience a plus. Able to read and understand machine drawings. BaaN (ERP System) experience a plus. Microsoft Office applications. Strong verbal and written communication skills. Creative thinker and problem solver. Capable of managing multiple priorities. Participate in H&S Safety program. Able to perform the essential functions of the position with or without accommodation.

The Horsburgh & Scott Company is a leading manufacturer of industrial gears and custom gear drives, boasting nearly 135 years of engineering and manufacturing expertise. Our commitment to quality and innovation ensures that we deliver the highest quality gearing products and services to our customers. To learn more about our Company and capabilities, visit our website at Horsburgh & Scott | Gear Manufacturer and Gearbox Repair. Job Summary: As a Machine Operator for H&S, you'll be setting up and operating Boring Mills, Lathes, Hobbing, and Grinding Machines to machine industrial gearing parts to specific tolerances. The operator is responsible for operating controls, setting offsets, editing programs, some deburring, and performing self-inspection of parts in-process and upon completion for conformance to requirements. The Operator will also use large overhead cranes and other large equipment. Primary responsibilities: Operate machine tools such as lathes, milling machines, and grinders to produce metal parts. Review electronic or written blueprints or specifications for a job. Calculate where to cut or bore. Shape steel, aluminum, titanium, plastic, silicon and other materials. Determine how fast or slow work piece is fed into machine. Determine how much material to remove. Select tools and materials for the job. Plan the sequence of cutting and finishing operations. Mark the work piece to show where cuts should be made. Position work piece on the drill press, lathe, or milling machine. Monitor and control feed rate and speed. Ensure work piece is properly lubricated and/or cooled. Regulate temperature of work piece. Detect problems by listening for specific sounds. Adjust cutting speed to compensate for harmonic vibrations. Monitor the accuracy of cuts. Replace dull cutting tools. Check accuracy of work against blueprints and specifications. Produce large quantities of parts. Determine how automated equipment will cut a part. Determine cutting path. Concert path, speed, and feed information into set of instructions for machine tool. Use manual and computer-controlled machinery. Write basic programs. Modify programs in response to problems. Qualifications and Experience Minimum of five years' experience on CNC Horizontal Boring Mills, Lathes, and Grinders, and proficiency with large-part machining and blueprint reading; with the understanding of geometric tolerancing and dimensioning. CNC programming experience a plus. Must be able to perform own setups, measure parts that consistently result in precision quality parts. Large overhead crane experience and move large work pieces. Must be able to edit G and M-codes, trouble shoot jobs and make adjustments as required. Strong shop mathematics (trigonometry) aptitude and the ability to use precision measuring instruments (calipers, mics and other gauges). Must have the ability to use a feed and speed chart or calculator to determine appropriate feeds, speeds, and depths of cut. Understanding of metal properties and appropriate cutting tools. Positive attitude required; dependable, self-starter and the willingness to help others. Ability to work in a large manufacturing environment and performs well with minimal supervision. Must be able to perform the essential functions of the job with or without accommodation.

Job Title: Business Manager Contracts - Power Generation Reports To: VP - Commercial Contracts Management Department: Commercial/Operations Job Type: Full-Time / Salary Exempt At National Electric Coil ("NEC"), we deliver critical components to power plants worldwide. Our projects are large-scale, complex, and mission-critical. We are growing rapidly and need business-minded leaders to ensure projects are delivered profitably and efficiently. Role Overview: We are seeking a Business Manager Contracts to provide oversight of financial, operational, and commercial performance of large-scale EPC projects. This role focuses on business strategy, portfolio management, and cross-functional coordination. Key Responsibilities: Monitor project and program financial performance, including P&L, budgets, cash flow, and margins. Analyze trends, risks, and opportunities to improve operational efficiency and profitability. Collaborate with senior leadership on forecasting, resource planning, and customer strategy. Lead internal governance processes including project reviews, risk assessments, and executive reporting. Coordinate across Sales, Engineering, Finance, Procurement, and Operations to ensure business objectives are met. Required Qualifications, Capabilities, And Skills: Bachelor's degree in Business, Finance, Engineering, or related field. Strong analytical, financial, and leadership skills. Preferred Qualifications, Capabilities, And Skills: Advanced degree (MBA, JD, or other relevant graduate credential) Experience in EPC, industrial, or energy sectors. Ability to work across multiple functional teams and lead complex projects. 7+ years of experience in business operations, program management, or commercial oversight. Safety and Compliance: Adhere to safety procedures and PPE requirements in all manufacturing and office environments. Position Type/Expected Hours of Work: This is a full-time, salaried (exempt) position. The standard work schedule is a minimum of 40 hours per week; however, hours may vary based on business needs. Occasional evening or weekend work may be required to support urgent matters. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this role. Reasonable accommodation may be made to enable individuals with disabilities to perform these functions. While performing essential job duties, the employee is regularly exposed to: Typical manufacturing and office environment requiring occasional exposure to noise, machinery, and possible PPE use (e.g., safety glasses, gloves, steel-toed boots). Frequent use of computers, and standard office equipment. The noise level is usually moderate but may vary depending on the work area or activity. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit; talk or hear; and use hands to handle, or touch objects or controls. The employee is regularly required to stand and walk. On occasion, the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Other Duties: Please note that this job description is not intended to cover or contain a comprehensive list of all activities, duties, or responsibilities required of the employee. Duties, responsibilities, and activities may change at any time, with or without notice, as business needs evolve. This position may require occasional travel to vendor or customer sites for support, as needed. Equal Opportunity Employer Statement: We are an Equal Opportunity Employer and value diversity. We do not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

• Location: OSU Outpatient New Albany • Job: PACU RN • Shift: Day shift, 7:30-4:00 Monday through Friday Minimal Requirements: • 2 years of experience • Epic experience is required • BLS and ACLS certification • Previous Charge Experience is required Patient Ratio is 1:2

Since 1971, Presrite Corporation has been providing world class forging solutions to our customers. We have three modern manufacturing plants plus a dedicated technical division for our Engineering and die making capabilities, all centrally located in Ohio. Press sizes range from 1,300 to 6,000 tons, forging approximately 125,000 tons of steel annually. Forgings we provide range from 2 to 300 pounds, all produced to the latest International quality standards. Our customers span many diverse markets: off-highway, agriculture, military, automotive, rail, oil and mining--just to name a few. Presrite also provides an excellent place to work. We offer a family oriented atmosphere, development and advancement opportunities, tuition reimbursement, and competitive pay with outstanding benefits. If you are looking for this type of environment, we have a great opportunity for you. We are currently seeking qualified candidates to join our Engineering team! We have an immediate opening for a Forge Engineer at our Technical Division located in Eastlake, OH. This position will report to the Corporate Engineering Manager. JOB SUMMARY: The Forge Engineer provides daily engineering support to the forge operations, including root cause analysis and troubleshooting of process issues; leads the APQP process; and acts as liaison between the three manufacturing plants and the Technical Division. This position will work closely with employees in the engineering, manufacturing, and quality departments. A candidate for the Forge Engineer position will work independently and in team settings, and possesses strong analytical, communication, and process skills. A candidate will also demonstrate strong attention to detail, and possess excellent continuous process improvement skills. MAJOR JOB RESPONSIBILITIES (not all inclusive) • Design, develop, and improve the manufacturing processes used to forge a part to print requirements • Launch and lead the APQP team/meetings from initial kickoff through design review and post-production review • Collaborate with the design engineers and operations to determine appropriate procedures, speeds and feeds, and die set up that will produce a try-out that meets the print • Provide all documentation internally from these runs and validate consistency over the life of the launch/APQP • Trouble shoot existing die issues/runs utilizing our discovery tool, forming collaborative teams to fully investigate while providing solutions through die modifications or redesigns, set-up adjustments or production parameter adjustments • Initiate PCN's and update prints as needed • Participate in try-outs for new and adjusted die designs, offering your expertise in process and design • Demonstrate knowledge of the Quality Policy and how it relates to customer requirements Requirements QUALIFICATIONS: • Bachelor's degree in Mechanical, Materials, or Manufacturing Engineering • 3- 5 years of experience in metals manufacturing industry (Forging preferred) • Ability to interpret blueprints, tolerancing and manufacturing specifications • Good working knowledge of statistical process control methods and its application • Ability to 3D model complex parts and assemblies • Strong working knowledge of 3D modeling software (Solidworks preferred), and strong proficiency in Microsoft Office is required; Deform software is a plus • Excellent verbal and written communication skills • Understanding of press forging fundamentals and die design is a plus • Self-motivated, high attention to detail, and strong multitasking abilities • Strong analytical, problem-solving, and organizational skills No phone calls or third-party recruiters, please. Employment Ready Applicants Only. The above information on this description has been designed to indicate the general nature and level of work. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of an associate assigned to this position. Presrite is an Equal Opportunity Employer. Employment contingent upon successful completion of background investigation. Pre-employment drug screening is required. The Company participates in E-Verify. E-Verify is an internet-based system that compares information from an employee's Form I-9, Employment Eligibility Verification, to data from U.S. Department of Homeland Security and Social Security Administration records to confirm employment eligibility. *********************

Multi-Family Construction/Development Group currently seeking a Project Manager. This position will report to the Vice President of Construction. Responsibilities include, but are not limited to: Partner with the Construction Executive in interacting with subcontractors Partner with the Construction Executive in the drafting of client proposals Partner with the Construction Executive on contract administration and management Work with preconstruction, estimating and scheduling on project estimate and schedule Provide direction to the project team to complete the projects safe and on time Perform on-site Project Manager duties on small scope projects Qualifications include: BS in a Construction related field preferred. Multi-Family Construction required. Podium, Wrap, Construction preferred. Strong working knowledge of Excel and Word Strong prioritization and organizational skills; detail-oriented Excellent verbal and written communication skills

Full-time Description Quality Engineer Since 1971, Presrite Corporation has been providing world class forging solutions to our customers. We have three modern manufacturing plants plus a dedicated technical division for our engineering and die making capabilities, all centrally located in northeast Ohio. Press sizes range from 1,300 to 6,000 tons, forging approximately 125,000 tons of steel annually. Forgings we provide range from 2 to 300 pounds, all produced to the latest International quality standards. Our customers span many diverse markets: off-highway, agriculture, military, rail, oil and mining--just to name a few. Presrite has helped our world move uninterrupted, one forging at a time, for over 50 years. If you are looking for a role in an innovative and industry leading company, we have a great opportunity for you. We are currently seeking qualified candidates for the Quality Engineer position at our E78th forge plant in Cleveland, OH, reporting directly to the Quality Manager. JOB SUMMARY: The Quality Engineer ensures products, processes, and systems meet quality, safety, and performance standards by developing quality control procedures, conducting audits and tests, analyzing data, identifying issues, implementing corrective actions, and collaborating with teams to drive continuous improvement. The Quality Engineer also ensures compliance with Presrite's quality system, and regulations such as ISO standards. MAJOR JOB RESPONSIBILITIES (not all inclusive) · Coordinate/facilitate resolution of manufacturing related quality issues. · Represent quality function as required in meetings/discussions for resolution of quality issues involving customers/suppliers, including customer liaison. · Represent quality function on material review board and APQP function. · Initiate the use of appropriate quality/statistical techniques, methods and studies to improve the quality of Presrite products and processes, increasing customer satisfaction. · Seek out and demonstrate active involvement in continuous improvement activities (departmental, plant, and Corporate). · Conduct internal quality audits. · Mentor hourly inspection personnel. · Perform other duties as assigned. · Possess and demonstrate knowledge of the quality policy and how it relates to customer requirements. · Working knowledge of the use of control plans, FMEA, APQP and PPAP processes. Requirements QUALIFICATIONS: · Bachelor's degree in Engineering or related field. · Minimum 3 years working in a quality role in a manufacturing environment (forging experience is a strong plus). · Ability to work well as part of a team, lead teams and use problem solving techniques for root cause analysis. · Ability to interpret and analyze statistical data (SPC, Six Sigma), including capability studies and gage R&R/MSA; knowledge of quality engineering concepts. · Create/utilize charts and reports utilizing Quality Management System (QMS) and Microsoft Office. Demonstrated expertise in Microsoft Office programs and related software. · Demonstrated experience applying quality engineering concepts, and quality system requirements including ISO-9000 and MAQMSR series documents. No phone calls or third-party recruiters, please. Employment Ready Applicants Only. The above information on this description has been designed to indicate the general nature and level of work. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of an associate assigned to this position Presrite is an Equal Opportunity Employer. Employment contingent upon successful completion of background investigation. Pre-employment drug screening is required. The Company participates in E-Verify. E-Verify is an internet-based system that compares information from an employee's Form I-9, Employment Eligibility Verification, to data from U.S. Department of Homeland Security and Social Security Administration records to confirm employment eligibility. *********************

Since 1971, Presrite Corporation has been providing world class forging solutions to our customers. We have three modern manufacturing plants plus a dedicated technical division for our engineering and die making capabilities, all centrally located in northeast Ohio. Press sizes range from 1,300 to 6,000 tons, forging approximately 125,000 tons of steel annually. Forgings we provide range from 2 to 300 pounds, all produced to the latest International quality standards. Our customers span many diverse markets: off-highway, agriculture, military, rail, oil and mining--just to name a few. Presrite has helped our world move uninterrupted, one forging at a time, for over 50 years. If you are looking for a leadership position in an innovative and industry leading company, we have a great opportunity for you. We are currently seeking qualified candidates to join our Executive team! SUMMARY: Reporting directly to the CEO, the Vice President - Operations will be the operational leader for the company, responsible for creating and implementing strategies that optimize Presrite's manufacturing processes, delivering operational excellence and financial efficiency. Specifically, the Vice President, Operations will implement the proper manufacturing operational controls, as well as the necessary reporting procedures. By focusing on safety, quality, delivery, cost, and sustainability, this position ensures alignment with business goals and long-term strategic plans. A successful candidate will bring a proven track record to ensure that Presrite achieves and exceeds customer expectations while maximizing financial returns to its stakeholders. Additionally, this role will establish an organizational structure that supports these initiatives by placing the best people in the right roles. To achieve Presrite's objectives, the Vice President, Operations will foster an environment of collaboration, innovation, sense of urgency, personal accountability, follow-through, engagement, and empowerment. Requirements MAJOR JOB RESPONSIBILITIES (not all inclusive) · Ensure the highest commitment to safety; drive productivity and efficiencies through the implementation of continuous improvement processes and initiatives. · Provide day-to-day leadership and management across the manufacturing locations. · Responsible for driving the operations to surpass business objectives and performance to budget; metrics driven - efficiency, productivity, OEE, etc. · Responsible for the measurement and effectiveness of all operations processes, and specifically provide timely, accurate, and operational metric reports on all items related to manufacturing and supply chain management. · Collaborate with the management team to develop and implement plans for manufacturing and supply chain infrastructure of systems, processes, and personnel designed to accommodate the rapid growth and efficiencies throughout the organization. · Motivate and lead a high-performance management team; working closely with plant and corporate resources to develop and lead an organization known for high quality products and world-class service. · Compliance with proper monitoring and reporting of production data via the ERP system. · Lead a success oriented, accountable environment within the company. QUALIFICATIONS: · Bachelor's Degree in Engineering (preferred), Management, or Business Administration. MBA a strong plus. · Minimum of 12 years of relevant and progressive manufacturing operations management experience (forging experience is a plus), of which at least 3 years have been in a senior management role; and a demonstrated track record of advancement with the ability to take on increasing levels of responsibility. · Proven success in overseeing multi-site operations. · Substantial experience in financial planning and analysis around manufacturing and supply chain with previous experience in reducing costs, improving profits, and streamlining operations. · Must have previous experience/best practices in implementing and using continuous improvement tools, such as Lean, 6S, Six Sigma, etc. · Must have experience with ISO 9001 or AS9100 quality systems. · Proven P&L experience with strong inventory management, budgeting, and planning capabilities to accurately capture manufacturing efficiencies and continuous improvement savings. · Excellent people skills, with an ability to partner with a dynamic leadership team. · Possess personal qualities of integrity, credibility, and commitment to corporate mission. · Flexible and able to multitask; can work within an ambiguous, fast-moving environment, while also driving toward clarity and solutions. · Exceptional negotiation, written and verbal communication/presentation skills. · Demonstrated resourcefulness in setting priorities and guiding investment in people and systems. · Proficient in MS Office 365, Infor/Syteline experience is a plus. No phone calls, please. Employment Ready Applicants Only. The above information on this description has been designed to indicate the general nature and level of work. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of an associate assigned to this position. Presrite is an Equal Opportunity Employer. Employment contingent upon successful completion of background investigation. Pre-employment drug screening is required. The Company participates in E-Verify. E-Verify is an internet-based system that compares information from an employee's Form I-9, Employment Eligibility Verification, to data from U.S. Department of Homeland Security and Social Security Administration records to confirm employment eligibility. *********************