Press operator jobs in Houston, TX

Port-Production Operator Trainee Huntsman is seeking a Port-Production Operator Trainee supporting the Polyurethanes Division located at our Houston Port TEROL site in Houston, Texas. This position will report to the Production Manager, Brian Shepard. Job Scope The Port-Production Operator Trainee will train under a qualified operator to learn and perform all operational tasks required for progression to Operator C within the Houston Port TEROL operation. This role supports safe, efficient, and compliant production activities through adherence to all Operational and EH&S policies, procedures, and practices. In summary, as the Port-Production Operator Trainee, you will: Perform essential Operator C duties in outside operations, including operating, starting up, and shutting down process equipment to produce quality, on-spec products. Maintain a current understanding of unit equipment, operating principles, and process impacts. Conduct routine unit rounds, adjust equipment as needed, and collect product samples for laboratory analysis. Review lab results and adjust operating conditions based on findings. Complete reports, operating logs, work orders, and safe work permits following prescribed procedures. Uphold good housekeeping standards to ensure a clean, safe, and orderly work environment. Monitor the safe handling, identification, storage, and removal of waste streams. Complete all assigned training and participate in site safety and environmental programs. Maintain regular workplace presence and work extra hours or overtime when required to support production needs. Collaborate effectively with team members and support broader Huntsman goals and initiatives. Qualifications You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates. The candidate must have an unrestricted right to work for Huntsman in the United States. Minimum Qualifications Education Required: Associate degree (2+year) in Process Technology, or High school diploma plus 6-12 months of experience in a petrochemical plant. Experience Required: 0-12 months of related experience. Certifications/Licenses: None required. Skills and Knowledge Candidates must demonstrate: Strong commitment to safety, environmental compliance, and operational discipline. Ability to learn and apply technical processes and operating procedures. Teamwork, communication, and the ability to work collaboratively with diverse colleagues. Attention to detail in monitoring equipment, collecting data, and maintaining accurate documentation. Dependability, including consistent attendance and willingness to work overtime when needed. Preferred Qualifications Prior experience in a petrochemical or manufacturing environment. Familiarity with process operations, equipment monitoring, or industrial safety programs. Working Environment Work is performed in an industrial chemical production environment. Requires ability to work outdoors in varying weather conditions. Requires standing, walking, climbing stairs/ladders, and wearing all required PPE. Must be able to work overtime or extra hours to support production demands. Huntsman is proud to promote equal opportunity in the workplace All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, national origin, disability, age, or any other protected characteristic. All unsolicited resumes presented by recruitment agencies are treated as pro bono information or service and will not be compensated. Huntsman is aware of scams involving fraudulent job offers. We do not make job offers until after a candidate has submitted a job application and has participated in an interview. Please be advised that any job offer that requires payment or requires you to deposit a check is likely a scam. If you have questions about any open positions at Huntsman or Rubison, please visit our Careers website at ******************************************** Additional Locations:

Job Description AERONES, a Global Leader in advanced Wind Turbine maintenance and robotics, is seeking a Wind Turbine Robotics Operator focused on Robotics services to join our U.S. Operations Team. This position is also known as Wind Field Technician. We specialize in cutting-edge robotic solutions that ensure safety, efficiency, and top-tier service for the wind energy industry. In this role, you'll have the opportunity to travel to wind farms across the country, with all accommodation and travel expenses fully covered by the Company. You will be performing inspections, maintenance, repairs, and upgrades on wind turbines - ensuring peak performance and safety standards are met. GWO Basic Safety Training (BST) and GWO Advanced Rescue Training (ART) Full certifications will be required to undertake the role. Job Tasks and Responsibilities: Maintenance and operation of robotic systems used for cleaning, inspection, and repair of wind turbines. Performing routine inspections on turbines to ensure optimal performance and compliance with safety standards. Preventative maintenance on wind turbines and associated systems to reduce downtime and maximize energy production. Fault diagnosis and resolution of technical issues using advanced diagnostic tools and technology. Reporting and documentation of work completed, including identifying issues, repairs, and maintenance performed. Ensuring adherence to safety protocols and industry standards. What We Offer: Stable, long term employment with career growth in a rapidly expanding, innovative Company Competitive hourly rate: $22.50 - $30.00 per hour (based on experience) $60 a day meal per diem Paid travel and lodging for Projects nationwide Work with a Global Team pioneering the future of wind turbine technology What We're Looking For: Strong mechanical and electrical troubleshooting skills Ability to travel frequently and work in Field conditions Previous experience in wind turbine maintenance is an advantage Requirements The minimum requirements to be considered for this role include: Applicants must be legally authorized to work in the United States. We are unable to sponsor Visas at this time. A Valid Drivers License Basic Computer skills Willing and able to undertake a Physical Check (Medical) to ensure ability to undertake the responsibilities of the role (working in confined spaces, climbing, lifting etc). Nice to have: GWO Basic Safety Training (BST) GWO Advanced Rescue Training (ART) Full GWO Basic Technical Training (BTT) OSHA 10 NFPA 70E Electrical safety awareness First Aid GE / Vestas / Siemens Gamesa / Nordex Turbine Operations / LOTO GWO Sea Survival Benefits We believe great work starts with feeling valued and supported. That's why we are building an thoughtful, competitive benefits and perks to help you thrive - professionally and personally - through every step of your Career with us. You will be eligible for: Health Insurance Medical (80% Employer contribution) Dental Vision Term Life Paid Time Off (PTO) - 10 days Aerones is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and consider all qualified applicants for employment without regard to Race, Color, Religion, Sex, Sexual Orientation, Gender Identity or Expression, National origin, Age, Disability, Veteran Status, or any other legally protected status. Employment decisions are based on qualifications, merit, and business needs. AERONES - Build the Future!

Job DescriptionDescription: Hulcher Services is seeking a motivated and success-driven Apprentice Operator I. You will play a vital role in transporting, operating and the servicing of assigned heavy equipment used in clearing railroad derailments by lifting and moving derailed railway cars and locomotives. About Us: Hulcher Service is an industry leader with more than 500 employees and over 25 divisions located in the United States and Mexico assisting customers with derailments as well as engineering work, track maintenance, disaster response, and environmental projects. What You'll Do: Drive tractor-trailer or escort vehicles. Material handling of heavy steel chains, blocks and steel cables, and other devices. Climbing and crawling on and under derailed railroad cars. Maintenance, cleaning and setup of equipment requiring use of small and large tools including cutting torch and welding. Digging, hammering, and other physical types of work with various tools Lifting 100 lbs. maximum with frequent lifting and/or carrying objects up to 50 lbs. Work at heights over 25 feet on railroad cars; may be on bridges, over water, or in water. Why Join Us: Room for growth Union benefits including, but not limited to medical insurance and pension plan Take your career to the next level and join our mission-driven team! At Hulcher you can apply with confidence in knowing you will be a valued asset to our team and be a part of a stable thriving industry! Requirements: What You Bring: Must have a valid Class A CDL with NO restrictions. Must have a valid driver's license. Ability to work on-call 24/7 365 days a year in an emergency response environment. Ability to travel up to 50% of the time. Ability to conduct maintenance inspections on equipment. Work Schedule: Monday through Sunday on the job or possibly at division. On call for 24 hours for derailments requiring immediate response. 8-hours/day Monday through Friday; on call at other times for derailments requiring immediate response. The Response Team is to be available at all times and all hours of the day.

We Create Products and Brands That People Trust to Clean, Sanitize, and Protect Their Homes and Pools When you join KIK Consumer Products, you're joining a team that cares about the work we do and about each other. We bring exceptional brands and products to consumers that help them protect the health and wellness of their families and the cleanliness of their homes and pools. We are committed to building a culture of performance driven by accountability, collaboration, and agility that enables timely fact-based decision-making and exceptional execution with unwavering ethics. As one of North America's largest independent manufacturers of consumer products, KIK helps a large portfolio of brands and retailers bring their products to life. Your Role at KIK Join our team as an experienced Machine Operator managing production equipment including fillers, case packers, capers, case sealers, palletizers and labelers. The scope of this role is to ensure the efficient and accurate filing of products into containers, adhering to specific volume and weight requirements, and maintain the highest standards of quality and filler operator works with the packaging end of a production line. The filler operator also operates filling machines and makes the necessary adjustments to ensure consistency. This is a 3rd shift position, 10:00pm-6:30am Monday-Friday and overtime on Saturdays as required. The pay is $22/hr.

Machine Shop Operator Houston, Texas Full-Time Role Summary/Purpose Plan and perform the set up and operation of an assigned CNC numerical controlled lathe to machine component parts in process of ferrous, non-ferrous and alloy metals. Work involves the assignment to either the NC/CNC Lathes, proving out computer programs in collaboration with Programmer, and following prescribed program, tooling, set up and offset specifications. Essential Responsibilities Must be able to work from detail part drawings, work orders, set ups, tooling, process and operation instruction sheets, and digital program. Set up and operate 2-axis lathes and operate 4-axis lathes on a wide range of products, receiving assistance from programmer or supervisor if needed. Review parts program file and select set tools in tool holder, turret, or cross slide location. Operate control console to enter program data, back off tool offsets, and check out with dry run. Edit the program as required. Unload bar stock from delivery truck with overhead crane and place in intermediate storage area. Load part, sequence each tool, enter offset adjustment data, and continue trails (as required) to produce piece meeting drawing specifications. Inspect parts periodically in accordance with established frequency, for conformance to quality and engineering specifications, making offsets (as required) to compensate for tool wear. Indicate work to detect and eliminate run out. Tolerances are very strict and involve a demand for squareness, concentricity, and parallelism. Detect and report faulty operations, defective material, and equipment, drawing discrepancies, and other unusual conditions to the proper supervisor. Maintain workplace in neat and orderly condition. Qualifications/Requirements GED or High School Diploma 1 - 2 years Manufacturing Experience Dresser is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills, and experiences within our workforce. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status, or other characteristics protected by law.

Job Description Machine Operator Sets up and operates computer numerical control Brake Press, Roll Former, Raz, CNC Punch, Laser, or Amada machines. Essential job functions: Selects, aligns punch tools. Identifies and select necessary metal and equipment, including mechanical equipment and/or tool. Retrieve and input computerized machine control media. Verifies conformance of finished work-piece to specifications. Uses bars, calipers, gauges, precision instruments, hand tools and wrenches. Maintains necessary maintenance records. Maintains a good housekeeping in the plant and work areas Marginal job functions: Perform other tasks as assigned by supervisor Knowledge, skills and abilities: Ability to carry out not only simple but complex oral and written. Basic math skills. Ability to read and understand English sufficiently. Ability to operate CNC machines and equipment. Ability to read blue prints drawings in order to perform jobs according to specifications. Ability to comprehend additional training in relation to the performing of the work duties. Ability to develop other technical and management skills for future promotion. High level of attentiveness and physical coordination to perform the work activities safely and productively. Physical demands: 100 % of the work tasks are performed indoors and subjected to environmental and weather condition changes. Hours:5:30 PM - 3:30 AM, MONDAY - FRIDAY Week: 40 or more hours per week. Lunch: Half an hour. Standing: Stands 100 % of the time Environment: The Shop is not air-conditioned Stress: Medium Physical task: Must bend, squat, lift, push or pull material up to 50 lbs frequently. Other Ergonomics Requirements: The position of CNC punch operator is a physically demanding job. The functions performed ordinarily involve: extending hands and arms in all directions, holding, grasping, pressing, turning objects using hands, picking, lifting, pinching, or otherwise working with fingers. Must of these work activities are performed from awkward positions that requires a lot of physical strength and coordination, including eyes' coordination. Functions also involve frequent stooping, kneeling, crouching and crawling, bending at waist, bending legs, bending downward and forward, and moving about on hands and knees. Performance of some tasks or operation of equipment may require motor coordination, finger-dexterity, eye-hand-foot coordination and color discrimination. Qualifications Standards: Prior CNC machine experience. Performance Standards: The criteria for evaluation in this position include, but are not limited to, the following: The ability to communicate effectively with and work with other personnel and customers. Proper operation of equipment. Visual observation and periodic verification. Job Posted by ApplicantPro

At Sabre Industries, we connect and power America's communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time. Our teams live out the organization's core values of integrity, commitment, innovation, and connection. That's how we continuously exceed our high standards of enterprise excellence-by creating a space for our engaged employees to thrive. With consistent hiring opportunities nationwide and countless career levels, chances are the next big step on your career path starts here. We work with our employees to create customized career paths and development in all facets of the organization. People will always be our greatest asset, and we place emphasis on enhancing the lives of our employees. Scope of Responsibility: Working under the direct supervision of the Manufacturing Lead person, the Machine Operator C is responsible for the cutting, laying out, punching, bending, drilling and stamping of materials as detailed on the shop drawings. They will also be responsible for usage of Sabre software reporting time to operations. Essential Duties: * Determines the sequence of operation by reading the shop drawings, specifications (if supplied) and all work orders. * Cuts, lays out, punches, bends, drills or stamps materials as detailed on the shop drawings with minimal operator defects. * Changes or replaces tooling and/or consumables on the machines. * Understands proper setting technique of the machines to avoid damage to the machines. * Loads programs related to nesting summaries into the machines. * Follows assigned work instructions to prepare items to be processed. * Logs in & out of the Epicor computer system to report run time and quantities. * Performs simple maintenance diagnosis of machines. * Uses overhead cranes, gantries, forklifts & combi lifts to move materials. * Keeps assigned work area clean and organized at all times & assists with overall housekeeping * Contributes to a safe working environment by being responsible for quality, safety, organization and cleanliness in all areas of operation. * Contributes to team effort of communicating & working well with others. * Additional duties as assigned * Regular and on-time attendance * Work in your shift as scheduled * Getting along with coworkers Position Requirements: Education: High school diploma or equivalent. Experience: 1-2 years of experience in an operational environment. Skills & Abilities: * Regular and timely attendance is required. * Ability to read and understand a tape measure to 1/16 inch or metric dimensions. * Ability to read, understand and communicate effectively in English. * Demonstrated ability to read blueprints, tape measure and comprehend documents such as safety rules, operating and procedure manuals * Ability to successfully complete Sabre's Machine Operator C certification and certify to use overhead cranes and gantries. * Ability to successfully complete Sabre's forklift certification (5k or 6k forklift and combi lifts) and operate a forklift safely. Physical Requirements: * Must be able to lift up to 50 pounds, frequently exerting 30 pounds of force. * Must wear Personal Protective Equipment (PPE) as required per the Company's safety policies and programs. * Must be able to perform physical activities that require considerable use of arms and legs and moving entire body, such as climbing, lifting, balancing, walking, stooping, bending, twisting and handling of materials * Position requires manual dexterity, ability to pick/pinch and work with fingers, repetitive motions of wrists/hands/finger, arm-hand steadiness and a safety-minded individual. * Must be able to use foot pedal to operate equipment. * Must be able to work in an open environment for long shifts (including weekends) exposed to extreme temperatures, standing entire shift * Must be able to pass commercial driver vision testing requirements. At Sabre Industries, we invest in your future with a competitive benefits program. As a full-time employee, you are eligible for: * Medical, Dental & Vision coverage * 401(k) with Company Match * Continuing Education & Tuition Reimbursement * Life and Disability Coverage * Paid Time Off & Paid Holidays * Health and Wellness Resources * Employee Discounts Sabre Industries is an Equal Opportunity Employer: M/F/Vets/Disabled/Sexual Orientation/Gender Identity Revised: 12/30/2024

Ameritex Machine and Fabrication is a high mix low volume sheet metal and structural fabrication facility that uses a variety of equipment such as CNC Fiber Lasers, CNC punch presses, CNC press brakes, and tube lasers to support over 19 production and assembly lines. The company serves customers in energy, oil and gas, automotive, electric vehicle, and aerospace. We operate out of a state of the art 100,000 sqft facility in Conroe, Texas. Position Summary We are looking for a Laser Machine Operator to join our innovative, fast-growing company. We are looking for operators to work on AMADA, TANAKA, KOIKE, or other top machines. While we are willing to train the candidates on new machines, they must be familiar with the laser cutting process or have prior experience in working with one of these machines. Key Responsibilities Machine Operation & Production \tSet up, program, and operate laser cutting machines to cut and form metal parts to specification. \tLoad and unload sheet metal materials using appropriate lifting and handling techniques. \tMonitor machine performance during production runs, adjusting settings as necessary to ensure accuracy and efficiency. \tVerify correct materials, thicknesses, and job specifications prior to cutting operations. \tMaintain optimal nesting of parts to minimize material waste. Quality Assurance \tInspect finished parts using measuring tools such as calipers, tape measures, and gauges to ensure compliance with blueprints and specifications. \tIdentify and correct defects, burrs, or imperfections before parts move to the next stage. \tDocument production data accurately for traceability and continuous improvement. Maintenance & Troubleshooting \tPerform routine machine checks and basic preventive maintenance such as cleaning lenses, checking coolant levels, and inspecting consumables. \tTroubleshoot minor operational issues and escalate complex problems to maintenance or supervision. \tReport equipment malfunctions promptly to minimize downtime. Safety & Compliance \tFollow all safety protocols and always wear required personal protective equipment (PPE). \tMaintain a clean, organized work area to prevent hazards and ensure efficient workflow. \tAdhere to company policies and comply with ISO, OSHA, and ITAR requirements. Teamwork & Communication \tCollaborate with production team members to meet schedules and customer deadlines. \tCommunicate clearly with supervisors regarding production challenges, material shortages, or quality concerns. \tProvide feedback for process improvements and efficiency gains. Qualifications Required: \tHigh school diploma or equivalent (GED). \tMinimum of 1 year of experience operating laser cutting equipment or similar CNC machinery in a manufacturing environment. \tAbility to read and interpret blueprints, work orders, and technical drawings. \tProficiency with measuring tools such as calipers, tape measures, and gauges. \tStrong understanding of metal fabrication processes and material types. \tCommitment to safety and quality standards. Preferred: \tExperience with Amada, Trumpf, or similar CNC laser machines. \tFamiliarity with MRP/ERP systems for job tracking. \tForklift certification or ability to obtain certification upon hire. \tBasic mechanical and troubleshooting skills. Physical Requirements \tAbility to stand, walk, bend, and lift for most of the shift. \tMust be able to lift at least 50 pounds regularly and safely. \tTolerance for noise, heat, and physical activity typical of a production environment. $16.00 - $26.00 Hourly

Acuren is looking for a Machine Operator I at our Magnolia, TX location. Responsibilities Cutting rough test samples according to instruction on a band saw Facing of hardness samples on a manual lathe Turning of mechanical sample blanks on a manual lathe Center Drilling mechanical sample blanks on a manual lathe Shaping reduced sections of mechanical samples on a computer assisted lathe Threading mechanical samples on a computer assisted lathe Cutting metallographic samples on an abrasive saw Following written procedures for sample preparation Sample identification and quality control to ensure integrity of tests Brinell and Rockwell hardness testing Mounting and polishing of metallographic samples Heat Treatment Operation of CNC cylindrical grinder for final mechanical sample Requirements Aptitude to adhere to safe work practices Perform work with a high degree of integrity Ability to lift up to 25 pounds repeatedly Capability to work flexible hours, overtime, and a 3/2 team schedule. Basic computer operating skills in a windows PC environment Previous experience in Mechanical or Metallographic sample preparation Familiarity in heat treating practice and theory Knowledge and/or experience in the machining of mechanical test samples. Knowledge and/ or experience in preparation of Metallography samples and Metallographic Testing Benefits Competitive salary Medical, dental, vision, and supplemental insurance 401K Plan Paid Holidays Paid Time Off Company Overview Acuren is a trusted, single source provider of technology-enabled asset protection solutions used to evaluate the structural integrity of critical energy, industrial and public infrastructures. Committed to delivering a Higher Level of Reliability , Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition-based monitoring services. Our work is critical to the integrity and safety of industrial firms, including petroleum refinery, pipeline, power generation, pulp & paper, mining, pharmaceutical, aerospace and automotive industries. Acuren employs over 4,000 dedicated professionals supporting the mechanical integrity and inspection programs of the world's largest industrial segments. Acuren is a market leader. Our formula for success is straightforward: be capable locally, with certified and well-equipped personnel supported by trained, experienced leaders. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees. #LI-MH1

Manufacturing Machine Operators! Do you have production and Machine Operation experience? We are looking for you! We need full-time Machine Operators that will learn to operate paper converting machinery in the production of bath tissue and paper towels. The position is located in Conroe, TX. Must be able to work 12 hour shift rotation, weekends and holidays! Shift hours are 6:00 - 6:30. This role is key to our production and if you have the experience in manufacturing and can maintain a strong focus on Safety, Quality and Efficiency we want you! The production area is climate controlled. RESPONSIBILITIES Operate and maintain production machines in a paper converting line. (Rewinders, unwinders, wrappers, palletizers, case packers, etc.) Ability to adhere to Safety Policy and Procedures a must! Complete work orders and requests in a timely fashion. Load raw materials (Parent Reels, Poly Rolls, Core Materials) by using overhead crane, pallet jack, etc. Monitor equipment, perform resets, replenish and troubleshoot assigned area of the line as needed. Determine and report downtime, pallet counts, machine speeds, etc. Maintain cleanliness of equipment and assigned areas. Monitor line for defective materials and perform quality checks. May operate automated packaging equipment. QUALIFICATIONS Education: High school diploma or equivalent required. Experience: 3 to 5 years of machine operation experience required. Manufacturing experience preferred. Skills: Strong mechanical aptitude, attention to detail and ability to work independently or with a team! Physical: Must be able to work 12 hour shifts standing, bending, stooping and lift up to 25 lbs. Excellent attendance record (the schedule is the 2-2-3 schedule) Strong attention to detail. Ability to work a Rotational work schedule (Days and Nights) including weekends and holidays. Ability to complete background check and pre- employment drug and alcohol testing requirements. We offer: Full benefit package (Medical, Dental, Vision, LTD, STD, Life Insurance). PTO and Vacation. Career Advancement.

For over 45 years, we have been at the forefront of the nutrition industry, renowned for our top-quality supplements and innovative product delivery systems. Our commitment to advancement is driven by our focus on research initiatives, unique product formulations, and unparalleled quality control. As a family-owned company with a rich history, we take pride in our valued partnerships with healthcare professionals, ensuring that our products meet the highest standards of excellence. This position is for 1 st shift Mon-Fri 5a-1:30p This position is responsible for ensuring products are manufactured in accordance with FDA regulatory requirements as well as company procedures and policies Essential responsibilities include, but are not limited to the following: · Assembling, sanitizing and operating tablet presses or encapsulating machines · Monitoring product for quality defects during production runs · Monitoring machine for optimal operation during production runs · Accurately calibrating machines and re-adjusting when necessary to achieve product specifications · Maintaining production cell to ensure the quality of the product is never compromised · Accurately recording tablet manufacturing weight, thickness and hardness on Production Batch Records · Accurately recording capsule manufacturing weight on Production Batch Records · Basic machine troubleshooting · Alerting the Production Supervisor when there are problems or discrepancies with either the machines or products · Accounting for and recording all losses occurred during a production run · Moving the generated product to staging area at the end of each production run · Disassembling and cleaning tablet presses and encapsulating machines · Cleaning and prepping production rooms before production runs · Effectively working, interacting and communicating with co-workers and lead/supervisor. · Demonstrating professional behavior while working in a team approach to managing challenging situations · Assisting in providing a safe, secure and comfortable environment for all staff · Performs other duties as assigned Work Requirements and skills: · Minimum of a High School Diploma or equivalent (GED) is required for this position · Must be able to read, write, and communicate in English to perform necessary duties · Previous or similar work experience is preferred, but not required · Must be able to complete BRC Production Operator training · Must demonstrate flexibility when re-prioritization is necessary · Must be able to work in a fast-paced team environment · Must be able to work overtime when the company deems it necessary · Ability to lift (up to 50-lbs), stand, walk, bend, crouch, reach, stretch, step, climb occasionally during the duration of the shift Benefits: * 401(k) and contribution from company * Incentive pay * 16 days of paid time off and paid holidays * Life and short/long-term disability insurance * Professional development assistance * Health, dental, and vision insurance * Flexible spending account * Referral program * Career growth path * In-house product allowance

HMT is looking for a Machine Operator for the Tomball, TX location. The Machine Operator will be responsible for metal fabrication using manufacturing processes such as shearing, stamping, punching, bending, slitting, grinding, manual operations, etc. Tasks include operation and control of power &brake presses and auxiliary equipment in compliance with HMT requirements. Job performance must aid attaining TDC key performance indicators for safety, quality, delivery and cost. Role Responsibilities: Produce parts made from plastics, stainless and carbon steel, aluminum and other materials by operating power & break presses for punching, cutting, forming, bending, slitting, etc. ensuring compliance with requirements. Setup and operate machinery according to work order, safety and performance procedures and expectations. Install workpiece stoppers, guides and any other auxiliary equipment required; control material flow IN/OUT. Carry out production ensuring that established features to the form, fit and function of the product are achieved during stamping process. Perform setup/ change-over applying the single minute exchange die (SMED) procedure. Monitor work piece quality on each operation by submitting 1st piece and the subsequent 100th pieces for inspection in compliance with TDC inspection-testing procedures. Operate machinery to the full capacity and report any issue that can result in machine sub-utilization. Maintain WIP & finished product identified regarding inspection status & traceability by placing TAGs/labels on pallets and crates indicating purchase order, part number, work order, date, quantity, etc. Fill paperwork timely by adding production output data to the routers, stating time, dates, quantities, approvers etc.; make sure info is accurate, clear and complete. Identify and segregate any nonconforming product and notify supervisor for determining further actions. Carry out daily preventive maintenance and inspection to machinery, tooling and auxiliary equipment, including trucks following the customized check lists; report any item noticed out of compliance from OSHA and company regulations. Dispose scrap, broken pallets, lubricants and other chemicals timely, using allotted containers/dumpsters as indicated by HMT procedures. Sort, set in order and clean tools, shadow boards, machinery, floors, cabinets, transportation carts, etc. in compliance with 5S program and the weekly tasks schedule. Other tasks as required by HMT management. Qualifications Required: High school or vocational training, preferable. 1-3 years of experience in manufacturing environment preferably sheet metal fabrication. Demonstrated ability to read and interpret basic engineering drawing. Maintain daily production performance above 90%. Successfully completed forklift training. Ability to communicate read and understand in the English language. Background and Drug Testing PHYSICAL REQUIREMENTS: The physical demands must be met by an employee to successfully perform essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. Ability to work in extreme temperatures' (cold or heat). While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to finger, handle, or feel and reach with hands and arms. The employee frequently is required to walk, stoop, kneel, climb, carry, pushing/pulling and use repetitive wrist and hand movements. The employee may be required to lift and/or move objects of up to 50 pounds. Hearing and seeing ability of rapid mental coordination. It is required to be mentally alert for the entirety of shift. About HMT HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer's need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive, and more profitable. HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

Job DescriptionDescription: Do you want to work for a growing family-owned business that strives to build a better future through sustainability and innovation? Are you looking for a new challenge in a stable, fast-growing sector? Then look no further; LT Foods Americas wants you to join our team now! We offer competitive pay, benefits, vacation time, and more! The Machine Operator is responsible for proper set up, operation, and cleaning/sanitizing industrial food processing equipment in a food manufacturing environment, which includes a Sauce Mixer, Toyo (packaging machine) and Retort (industrial size food pressure cooker). The machine operator sets up equipment and materials for production, calibrates machines in accordance with product and packaging specifications, monitors equipment, adjusts machine parameters, verifies correct ingredients are mixed and maintains accurate documentation in accordance with FDA and other quality requirements. This position is divided into 3 Levels: Level 1 = demonstrated proficiency on 1 machine; Level 2 = demonstrated proficiency on 2 machines; Level 3 = demonstrated proficiency on all machines. Machine Operators are expected to learn and operate all food production equipment and machines. Key Responsibilities (or Principle Accountabilities): Move carts of product (weighing approximately 1000 lbs.) in and out of retorts Continuously monitor cook times and critical information for designated machine Accurately scale ingredients per documentation Report lot numbers, perform quality checks as per requirements and record data either manually or electronically Report any process deviation in real time Review and confirm all critical factors are met for each cycle (chart & retort log) Maintain check weigh operation Account for waste and report for all areas of operation Promptly communicate exceptions and batch information Keep area clean and presentable at all times. Actively participate in new hire and continuous training in order to thoroughly understand and execute all machine controls and operations Adhere to all Good Manufacturing Practices (GMPs), food safety requirements and work safety protocol and requirements Requirements: Minimum Requirements: High School Diploma or GED. Able to communicate effectively in basic English (speak, read, write) Previous manufacturing experience required; Food Manufacturing / experience handling raw materials preferred Must demonstrate basic mechanical aptitude and computer skills; Able to use touch screen equipment Able to push/pull large carts of product in and out of retorts - see physical requirements Excellent attention to detail, with the ability to follow verbal and written instructions and processes and legibly complete documentation paperwork. Excellent work ethic and communication skills, with the ability to work both individually and as a contributing member of a team. Maintain attendance standards and be at work on time on a regular basis. Physical Demands: Frequent to continuous standing Occasional to frequent manual loading and unloading Retort by pulling or pushing very heavy retorts cart that weighs approximately 1000 pounds is required. Occasional to frequent reaching, pushing, pulling, lifting up to 50 pounds, grasping, walking, climbing, balancing, bending, stooping, kneeling and/or crouching. Ability to multitask, while displaying attention to detail, and prioritize in a fast paced, quickly changing environment Work Environment: This position is located in a food manufacturing plant. Noise level is moderate-high. While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts. Required to wear hair/beard net, hearing protection, safety glasses, hard hat, lab coat and safety shoes. Other PPE may be designated.

Houston Port - Production Operator Trainee Huntsman is seeking a Production Operator Trainee supporting the Polyurethanes Division located in Houston Port TEROL, Houston, Texas. This position will report to the Production Manager. Job Scope The Production Operator Trainee will train under qualified operators to learn and perform all tasks necessary for the safe and efficient operation of the Houston Port TEROL production facility. The role focuses on developing proficiency in operating, monitoring, and maintaining process equipment while adhering to all Operational and EH&S procedures. In summary, as the Production Operator Trainee, you will: Perform outside operating duties including startup, shutdown, and operation of process equipment for producing quality, on-spec products. Maintain up-to-date knowledge of unit operations, equipment, and operating methods. Conduct routine rounds, check and adjust equipment, draw samples, and make operating adjustments based on lab analysis. Complete reports, charts, operating data, work orders, and safe work permits. Maintain proper housekeeping to ensure a clean and orderly work area. Monitor safe handling, storage, identification, and removal of waste streams. Complete all required training assignments. Participate in site safety and environmental programs. Be present at the workplace regularly and work extra hours or overtime if needed to meet production objectives. Collaborate with team members and support company goals as assigned. Qualifications You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates. The candidate must have an unrestricted right to work for Huntsman in the United States. Minimum Qualifications Education required High school diploma or equivalent. Experience No prior operator experience required; training will be provided. Skills and Knowledge Strong commitment to safety, environmental compliance, and operational discipline. Ability to follow procedures and work under close supervision. Attention to detail with solid documentation and record-keeping skills. Ability to work collaboratively in a team environment with diverse perspectives. Willingness to learn, complete training assignments, and develop operational capabilities. Strong work ethic, reliability, and ability to work overtime when needed. Preferred Qualifications Previous experience in manufacturing, chemical operations, or industrial environments. Basic mechanical aptitude or familiarity with process equipment. Prior exposure to safety programs or industrial training. Working Environment Work is performed in an industrial chemical plant environment. Requires standing, walking, climbing stairs/ladders, and working outdoors in varying weather conditions. Must be able to wear appropriate PPE, including respirators when required. Requires ability to work rotating shifts, extended hours, or overtime as needed to support production demands. Huntsman is proud to promote equal opportunity in the workplace All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, national origin, disability, age, or any other protected characteristic. All unsolicited resumes presented by recruitment agencies are treated as pro bono information or service and will not be compensated. Huntsman is aware of scams involving fraudulent job offers. We do not make job offers until after a candidate has submitted a job application and has participated in an interview. Please be advised that any job offer that requires payment or requires you to deposit a check is likely a scam. If you have questions about any open positions at Huntsman or Rubison, please visit our Careers website at ******************************************** Additional Locations:

**We Create Products and Brands That People Trust to Clean, Sanitize, and Protect Their Homes and Pools** When you join KIK Consumer Products, you're joining a team that cares about the work we do and also about each other. We bring exceptional brands and products to consumers that help them protect the health and wellness of their families and the cleanliness of their homes and pools. We are committed to building a culture of performance driven by accountability, collaboration, and agility that enables timely fact-based decision-making and exceptional execution with unwavering ethics. As one of North America's largest independent manufacturers of consumer products, KIK helps a large portfolio of brands and retailers bring their products to life. **Your Role at KIK** Join our team as an experienced Machine Operator managing production equipment including fillers, case packers, cappers, case sealers, palletizers and labelers. The scope of this role is to ensure the efficient and accurate filing of products into containers, adhering to specific volume and weight requirements, and maintain the highest standards of quality and filler operator works with the packaging end of a production line. The filler operator also operates filling machines and makes the necessary adjustments to ensure consistency. This is a 3 rd shift position, 10pm-6:30am Monday-Friday and overtime on Saturdays as required. The pay is $17.5/hr.

Machine Shop Operator Houston, Texas Full-Time Role Summary/Purpose Plan and perform the set up and operation of an assigned CNC numerical controlled lathe to machine component parts in process of ferrous, non-ferrous and alloy metals. Work involves the assignment to either the NC/CNC Lathes, proving out computer programs in collaboration with Programmer, and following prescribed program, tooling, set up and offset specifications. Essential Responsibilities Must be able to work from detail part drawings, work orders, set ups, tooling, process and operation instruction sheets, and digital program. Set up and operate 2-axis lathes and operate 4-axis lathes on a wide range of products, receiving assistance from programmer or supervisor if needed. Review parts program file and select set tools in tool holder, turret, or cross slide location. Operate control console to enter program data, back off tool offsets, and check out with dry run. Edit the program as required. Unload bar stock from delivery truck with overhead crane and place in intermediate storage area. Load part, sequence each tool, enter offset adjustment data, and continue trails (as required) to produce piece meeting drawing specifications. Inspect parts periodically in accordance with established frequency, for conformance to quality and engineering specifications, making offsets (as required) to compensate for tool wear. Indicate work to detect and eliminate run out. Tolerances are very strict and involve a demand for squareness, concentricity, and parallelism. Detect and report faulty operations, defective material, and equipment, drawing discrepancies, and other unusual conditions to the proper supervisor. Maintain workplace in neat and orderly condition. Qualifications/Requirements GED or High School Diploma 1 - 2 years Manufacturing Experience Dresser is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills, and experiences within our workforce. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status, or other characteristics protected by law.

Job Description Machine Operator Sets up and operates computer numerical control Brake Press, Roll Former, Raz, CNC Punch, Laser, or Amada machines. Essential job functions: Selects, aligns punch tools. Identifies and select necessary metal and equipment, including mechanical equipment and/or tool. Retrieve and input computerized machine control media. Verifies conformance of finished work-piece to specifications. Uses bars, calipers, gauges, precision instruments, hand tools and wrenches. Maintains necessary maintenance records. Maintains a good housekeeping in the plant and work areas Marginal job functions: Perform other tasks as assigned by supervisor Knowledge, skills and abilities: Ability to carry out not only simple but complex oral and written. Basic math skills. Ability to read and understand English sufficiently. Ability to operate CNC machines and equipment. Ability to read blue prints drawings in order to perform jobs according to specifications. Ability to comprehend additional training in relation to the performing of the work duties. Ability to develop other technical and management skills for future promotion. High level of attentiveness and physical coordination to perform the work activities safely and productively. Physical demands: 100 % of the work tasks are performed in-door and subjected to environmental and weather condition changes. Hours: 8 or more per day Week: 40 or more hours per week. Lunch: Half hour. Standing: Stands 100 % of the time Environment: Shop is not air-conditioned Stress: Medium Physical task: Must bend, squat, lift, push or pull material up to 50 lbs frequently. Other Ergonomics Requirements: The position of CNC punch operator is a physically demanding job. The functions performed ordinarily involve: extending hands and arms in all directions, holding, grasping, pressing, turning objects using hands, picking, lifting, pinching, or otherwise working with fingers. Must of these work activities are performed from awkward positions that requires a lot of physical strength and coordination, including eyes' coordination. Functions also involve frequent stooping, kneeling, crouching and crawling, bending at waist, bending legs, bending downward and forward, and moving about on hands and knees. Performance of some tasks or operation of equipment may require motor coordination, finger-dexterity, eye-hand-foot coordination and color discrimination. Qualifications Standards: Prior CNC machine experience. Performance Standards: The criteria for evaluation in this position include, but are not limited to, the following: The ability to communicate effectively with and work with other personnel and customers. Proper operation of equipment. Visual observation and periodic verification. Job Posted by ApplicantPro

We Create Products and Brands That People Trust to Clean, Sanitize, and Protect Their Homes and Pools When you join KIK Consumer Products, you're joining a team that cares about the work we do and also about each other. We bring exceptional brands and products to consumers that help them protect the health and wellness of their families and the cleanliness of their homes and pools. We are committed to building a culture of performance driven by accountability, collaboration, and agility that enables timely fact-based decision-making and exceptional execution with unwavering ethics. As one of North America's largest independent manufacturers of consumer products, KIK helps a large portfolio of brands and retailers bring their products to life. Your Role at KIK Join our team as an experienced Machine Operator managing production equipment including fillers, case packers, cappers, case sealers, palletizers and labelers. The scope of this role is to ensure the efficient and accurate filing of products into containers, adhering to specific volume and weight requirements, and maintain the highest standards of quality and filler operator works with the packaging end of a production line. The filler operator also operates filling machines and makes the necessary adjustments to ensure consistency. This is a 3rd shift position, 10pm-6:30am Monday-Friday and overtime on Saturdays as required. The pay is $17.5/hr.

Sets up and operates computer numerical control Brake Press, Roll Former, Raz, CNC Punch, Laser, or Amada machines. Essential job functions: * Selects, aligns punch tools. * Identifies and select necessary metal and equipment, including mechanical equipment and/or tool. * Retrieve and input computerized machine control media. * Verifies conformance of finished work-piece to specifications. * Uses bars, calipers, gauges, precision instruments, hand tools and wrenches. * Maintains necessary maintenance records. * Maintains a good housekeeping in the plant and work areas Marginal job functions: * Perform other tasks as assigned by supervisor Knowledge, skills and abilities: * Ability to carry out not only simple but complex oral and written. * Basic math skills. * Ability to read and understand English sufficiently. * Ability to operate CNC machines and equipment. * Ability to read blue prints drawings in order to perform jobs according to specifications. * Ability to comprehend additional training in relation to the performing of the work duties. * Ability to develop other technical and management skills for future promotion. * High level of attentiveness and physical coordination to perform the work activities safely and productively. Physical demands: 100 % of the work tasks are performed in-door and subjected to environmental and weather condition changes. Hours: 8 or more per day Week: 40 or more hours per week. Lunch: Half hour. Standing: Stands 100 % of the time Environment: Shop is not air-conditioned Stress: Medium Physical task: Must bend, squat, lift, push or pull material up to 50 lbs frequently. Other Ergonomics Requirements: The position of CNC punch operator is a physically demanding job. The functions performed ordinarily involve: extending hands and arms in all directions, holding, grasping, pressing, turning objects using hands, picking, lifting, pinching, or otherwise working with fingers. Must of these work activities are performed from awkward positions that requires a lot of physical strength and coordination, including eyes' coordination. Functions also involve frequent stooping, kneeling, crouching and crawling, bending at waist, bending legs, bending downward and forward, and moving about on hands and knees. Performance of some tasks or operation of equipment may require motor coordination, finger-dexterity, eye-hand-foot coordination and color discrimination. Qualifications Standards: * Prior CNC machine experience. Performance Standards: The criteria for evaluation in this position include, but are not limited to, the following: * The ability to communicate effectively with and work with other personnel and customers. * Proper operation of equipment. * Visual observation and periodic verification.