Process engineer jobs in Kenosha, WI - 802 jobs

The Lean Continuous Improvement Engineer is responsible for driving continuous improvement efforts on the manufacturing floor for HellermannTyton. This role is responsible for analyzing current production processes, identifying areas for improvement, and implementing strategies to enhance efficiency, quality, and safety. The engineer will work closely with various departments including plant leadership and hourly production personnel. Essential Functions: Apply strong data analysis techniques to improve overall plant efficiencies and solve complex problems. Understand processing capabilities and tolerances (plastics). Analyze work standards to improve labor utilization. Reorganize workflow to improve processes. Analyzes manufacturing process flows and floor layout for the enhancements of safety, quality, cost reduction, and throughput. Leads Root Cause Analysis for non-conformances and Corrective Actions. Other Functions: Identify and develop the improvement of equipment, processes, and methods. Improve the efficiency of overall manufacturing operations. Other duties as assigned. What You'll Bring: Bachelor's Degree in Engineering 2+ Years of professional experience Project Management Skills Green Belt Certification (preferred) Must have a valid driver's license, with an acceptable driving record, along with adequate insurance Strong written and verbal communication skills Rev. 4.30.2025 By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position. HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

The Applications Engineer is responsible for providing technical expertise, process development, and customer support related to industrial machinery. This role bridges engineering, sales, and service by demonstrating machine capabilities, optimizing cutting parameters, and ensuring customers achieve maximum value from their laser systems. Primary Responsibilities: Develop and optimize laser cutting parameters for various metals and material thickness. Conduct machine demonstrations, trials, and proof of concept test for prospective customers. Troubleshoot cutting quality and process issues. Provide on-site and remote training to customers on machine operation, maintenance, and process optimization. Develop and document cutting process databases, application notes, and best practice guides. Secondary Responsibilities: Support installation and commissioning at customer sites as needed Prepare technical documentation, cutting samples, and reports for customer presentations Support trade shows, open houses, and industry events with live demonstration and technical expertise Assist in product development by relating customer and application insights to R&D Position Requirements: Bachelor's degree in mechanical or manufacturing engineering, Materials Science, or a related technical field (Equivalent experience may be considered) 5+ Years of experience in laser processing, CNC machinery, or precision metal fabrication Hands-on experience with fiber laser products highly preferred Knowledge of motion controls systems, optics, and materials sciences is a plus Familiarity with CAD/CAM software Travel requirement is 25% HSG is committed to ensuring equal employment opportunities to all qualified persons without regard to race (including associated hairstyles), color, religion, sex, gender identity, sexual orientation, national origin, ancestry, citizenship status, age, marital status, genetic information, military status, unfavorable discharge from military service, order of protection status, pregnancy, arrest record, disability, or any other status protected by applicable law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. HSG participates in E-Verify and conducts pre-employment drug testing and background checks as part of our hiring process.

Consumers Credit Union (CCU) is one of the largest, fastest growing credit unions in Illinois! Every year we look for a diverse group of hardworking students to join our IGNITE Intern Program. What does IGNITE mean to us and what can you expect? Interns Growing, Networking, and Innovating through Transformational Experiences. We hire college students because we believe in fresh ideas. These are not paper pushing, copy making internships. We provide real work experience to our Interns. During the Program you will interact with and get exposure to multiple departments and leaders throughout the Credit Union. You'll learn firsthand why we are a certified Great Place to Work and experience our awesome team atmosphere by working with other Interns on projects, volunteering in the community, and participating in events and educational sessions. Our intent is to create a future career path for students who have an interest in the financial services industry. IGNITE is designed to expose you to a variety of opportunities while fostering growth and learning. We are seeking students that are interested in a Summer 2026 internship supporting the Process Improvement team. The Process Improvement Intern will report to the Director of Process Improvement and will help support the growth of our established Test Automation framework. Test automation involves running tests automatically, managing test data, and using the results to enhance system and software quality. This work will include maintaining and enhancing our existing regression suites and conduct a comparative analysis between the automated regression suites and the manual testing activities currently performed by testers. The goal of this analysis is to identify overlaps and opportunities to reduce manual testing where coverage already exists in automated tests. Requirements for the Process Improvement internship Currently attending an accredited college or university. Rising juniors and seniors working toward a bachelor's degree in Computer Science, Software Engineering, Computer Engineering, or Quality Assurance, or a related major. Rising sophomores may be considered. Minimum 3.0 GPA. Ability to work 32 hours per week for the summer (generally 8:00-5:00 Monday-Thursday) for the duration of the 12-week program (5/26/2026 - 8/13/2026). The schedule will involve onsite days based in Lake Forest, IL. Local candidates only. Proficient with Word, PowerPoint, Excel and the wider Microsoft Office suite including email, calendaring, and instant messaging. Professional written and verbal communication skills. Problem solving, critical thinking, and strong mathematical skills. Detail oriented, strong visual inspection skills, able to produce accurate work. Ability to work independently after receiving work direction. Good time management skills. Basic understanding of Quality Assurance life cycle, methodologies and best practices. Manual testing experience. Familiarity with test case management and defect tracking tools. Programming, coding or development experience is a plus! Experience with any of the following is a plus! Structured Query Language (SQL); Robotic Process Automation; Azure Dev Ops Pipeline; Agile/Scrum environment. We are seeking diversity in all dimensions! Ethnicity, gender, sexual orientation, religion, work experience, volunteer experience and more! Check out more info about the IGNITE Program on our careers site and apply soon. Go to: Internship Opportunities Compensation and Benefits The compensation range for this role is $18.50 to $20.50 per hour. The hourly rate is determined by class year as of Fall 2026 (sophomore, junior, senior) and may also consider additional factors such as skill sets, experience and training, licensure and certifications, and other business and organizational needs. Compensation decisions are dependent on the facts and circumstances of each case. Consumers Credit Union provides eligible employees an opportunity to participate in our medical (High Deductible, HMO and PPO), dental, vision, spending accounts, short-term disability, long-term disability, life insurance and other plans effective date of hire. The internship is a seasonal part time position and is not eligible for most benefits. For more information about benefit offerings, please visit our careers page: about/what-we-do/careers About CCU Founded in 1930 and headquartered in Lake Forest, IL, CCU has $4.3 billion in assets and serves more than 272,000 members, making it one of the largest credit unions in the state. CCU believes that nobody needs banks on every corner, but everyone needs people who are in their corner. We've been recognized as a Great Place to Work multiple years in a row, and we're committed to growing both our business and our people. To learn more, visit myconsumers.org Equal Opportunity Employer CCU complies with the requirements and spirit of the law in the implementation of all facets of equal opportunity in employment. There will be no discrimination on the basis of race, ancestry, color, religion, sex, sexual orientation, gender identity, marital status, pregnancy, age, national origin, citizenship, disability, genetic information, military status (including unfavorable discharge from the military), criminal or arrest history (unless job related), crime victim status, or any other protected characteristic in the recruitment, selection, training, utilization, promotion, termination, or any other employment actions or term and condition of employment. CCU complies with applicable state and local laws governing non-discrimination in employment in every location in which CCU has facilities. We are committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. If reasonable accommodation is needed to participate in the job application or interview process please contact our Human Resources team at: or . Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Established in 1991, Collabera is one of the fastest growing end-to-end information technology services and solutions companies globally. As a half a billion dollar IT company, Collabera's client-centric business model, commitment to service excellence and Global Delivery Model enables its global 2000 and leading mid-market clients to deliver successfully in an increasingly competitive marketplace. With over 8200 IT professionals globally, Collabera provides value-added onsite, offsite and offshore technology services and solutions to premier corporations. Over the past few years, Collabera has been awarded numerous accolades and Industry recognitions including. • Collabera awarded Best Staffing Company to work for in 2012 by SIA. (hyperlink here) • Collabera listed in GS 100 - recognized for excellence and maturity • Collabera named among the Top 500 Diversity Owned Businesses • Collabera listed in GS 100 & ranked among top 10 service providers • Collabera was ranked: • 32 in the Top 100 Large Businesses in the U.S • 18 in Top 500 Diversity Owned Businesses in the U.S • 3 in the Top 100 Diversity Owned Businesses in New Jersey • 3 in the Top 100 Privately-held Businesses in New Jersey • 66th on FinTech 100 • 35th among top private companies in New Jersey *********************************************** Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description • The primary responsibility is in plastic co-injection molding process and polymer melt extrusion process, and their mold/tool design to support for existing and new and pipeline device delivery for device-drug combination products. • Major responsibility in device plastic molding, co-injection molding and co-extrusion processes with the design of mold/tool from the small scale to the large scale of commercial production by utilizing GMP and ISO standards, and also testing for high volume productions to support biopharmaceutical products. • Partnering with third party manufacturing (TPM) from the small-scale molding with mold/tool design to scale up for the commercial production in the co-injection/co-extrusion and their mold/tool design for scale up for commercial applications. Major Responsibilities: • Responsible for medical device part co-injection and co-extrusion processes, and their mold/tool design and scientific molding to support processing optimization for high volume injection and extrusion processes • Responsible for the molding/extrusion process, polymer material and equipment integration to develop process and broaden the process space of co-injection and co-extrusion processes • Responsible to partner with TPM to design mold/tool and molding/extrusion process with the selected materials and injection and co-injection molding machine for process optimization • Responsible to work with design engineers to design and develop the part design and conduct the molding trials to optimize the part design, mold/tool design and molding and co-injection process through quality by design to meet the functionality and manufacturability requirements Skills Requirements • Experience in part molding in co-injection and co-extrusion processes with scientific molding approach to broaden the process space to meet part dimension specs and tolerance ranges • Experience in Moldflow analysis software and with polymer material properties to assess and predict the part quality in terms of part dimension, warpage, and built stress mitigation to optimized the part quality • Hand-on experience in co-injection and co-extrusion processes and in partnership with TPM for the part develop and manufacture for multiple layers of co-injection and co-extrusion parts • Hand-on experience in both melt extrusion and injection molding is preferred • Experience in polymer, plasticized polymer and thermoplastic elastomer (TPE) co-injection and melt extrusion and their mold/tool design and development for scale up to commercial production • Experience in system integration of design, materials, process, equipment and assembly for medical device and experience in device functionality testing of components and assembly • Experience in partnering with third party manufacturing for production to develop the mold/tool and their design trials for part functionality and manufacturability applications. Qualifications BS with preferred 5-10 years of experience; Or MS with preferred 3-10 years of experience; Or Ph.D. with preferred 2-8 years of experience in Molding/Extrusion Engineering, Manufacturing Engineering, Material Engineering, Mechanical Engineering, Biomechanical Engineering, or Biomedical Engineering. Additional Information All your information will be kept confidential according to EEO guidelines.

Under the direction of the Production Supervisor, the Shift-Based Process Engineer is a hands-on technical leader assigned to a specific production shift, responsible for maintaining stable, capable, and repeatable injection molding processes. This role works directly on the production floor, supporting mold startups, changeovers, troubleshooting, and continuous improvement activities during the assigned shift. The Process Engineer is the primary technical authority on shift, ensuring processes remain within validated scientific molding windows and that quality, scrap, downtime, and safety issues are addressed in real time. _________________________________________________________________________________________________________ Essential Duties & Responsibilities This position includes, but is not limited to, the following shift-specific responsibilities: Production & Process Ownership Serve as the on-shift technical owner for molding processes across assigned machines. Lead and support mold setups, startups, and changeovers during the assigned shift. Establish, validate, and sustain RJG/D3 scientific molding processes on the production floor. Ensure processes are running within defined windows and take immediate action when deviations occur. Troubleshoot molding, tooling, material, automation, and machine issues impacting quality or throughput. New Tooling & Process Validation Run and support new mold trials, tool samples, and ECN validations on the assigned shift. Develop practical, shift-ready setup sheets, startup instructions, and processing standards. Identify and escalate tooling, machine, or design concerns discovered during production runs. Communicate trial results and shift learnings clearly during shift handoffs and to Engineering leadership. Quality & Continuous Improvement Identify whether part quality issues are process-, tooling-, machine-, or material-related and lead corrective actions. Conduct DOE studies and capability improvements directly in production to improve CTQs. Drive scrap reduction, cycle time improvements, and process stability initiatives. Support and participate in root cause investigations for recurring shift-level issues. Interface with Quality on control plans, inspection methods, and capability concerns. Shift Team Support & Development Work side-by-side with Setup Technicians, Process Technicians, Operators, Maintenance, and Automation. Provide on-the-job training and mentoring in: RJG process control Scientific molding (D3) Practical troubleshooting and escalation criteria Act as the primary technical escalation point during the shift. Ensure strong communication during shift handoffs, including process status, risks, and actions required. Safety, 5S & Standards Support and enforce plant safety initiatives and safe setup practices. Maintain and enforce strong 5S and housekeeping standards within molding areas. Promote disciplined process control and adherence to documented standards. _________________________________________________________________________________________________________ What Success Looks Like on Shift: Stable processes maintained throughout the shift Faster, smoother startups and changeovers Reduced scrap, downtime, and unplanned adjustments Strong technical capability across shift personnel Clear, effective shift-to-shift communication and handoff _________________________________________________________________________________________________________ Minimum 10 years of hands-on injection molding experience in a production environment. Proven experience as a Process Engineer or Senior Process Engineer, working directly on molding machines. Strong background in RJG process control and scientific molding (D3). Deep working knowledge of molding machine controls and troubleshooting. Ability to read and understand tooling prints and mold construction concepts. Strong root cause analysis and problem-solving skills. Comfortable being the primary technical authority on a shift. Ability to communicate clearly across shifts and with Engineering, Quality, and Operations leadership. Willingness to work assigned shift and provide support during critical production events. Ability to travel between facilities or customer locations as required. Lean manufacturing and 5S experience preferred. Compensation details: 40-41 Hourly Wage PIbf8ed70bcb3c-31181-39458094

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

We are the leading provider of professional services to the middle market globally, our purpose is to instill confidence in a world of change, empowering our clients and people to realize their full potential. Our exceptional people are the key to our unrivaled, culture and talent experience and our ability to be compelling to our clients. You'll find an environment that inspires and empowers you to thrive both personally and professionally. There's no one like you and that's why there's nowhere like RSM. Responsibilities: Engaging with project teams to assist with project deliverables Participates in client meetings and site visits while interacting with top-level management to obtain pertinent information Building successful customer relationships Collaborating and working effectively with consultants in other regions and practices Perform ongoing support as needed Required Qualifications: 90 credit hours completed Working towards B.A. / B.S. degree or equivalent from accredited university Major in Business Admin/Management, Entrepreneurship, Global Business, Economics, Accounting, Finance, Industrial Engineering, Computer Science, Information Systems, Operations & Supply Chain, or other related degrees Travel is required. Must have access to and ability to arrange for use of reliable modes of transportation to those locations Ability to travel up to 20-30% locally and nationally 0 - 2 years relevant work experience A minimum 3.0 GPA is preferred Preferred Qualifications: Excellent written and verbal communication skills Strong computer skills, including MS Office (primarily excel and PowerPoint) Relevant, hands-on, work-related experience in a consulting environment through an internship or other relevant experience At RSM, we offer a competitive benefits and compensation package for all our people. We offer flexibility in your schedule, empowering you to balance life's demands, while also maintaining your ability to serve clients. Learn more about our total rewards at ************************************************** All applicants will receive consideration for employment as RSM does not tolerate discrimination and/or harassment based on race; color; creed; sincerely held religious beliefs, practices or observances; sex (including pregnancy or disabilities related to nursing); gender; sexual orientation; HIV Status; national origin; ancestry; familial or marital status; age; physical or mental disability; citizenship; political affiliation; medical condition (including family and medical leave); domestic violence victim status; past, current or prospective service in the US uniformed service; US Military/Veteran status; pre-disposing genetic characteristics or any other characteristic protected under applicable federal, state or local law. Accommodation for applicants with disabilities is available upon request in connection with the recruitment process and/or employment/partnership. RSM is committed to providing equal opportunity and reasonable accommodation for people with disabilities. If you require a reasonable accommodation to complete an application, interview, or otherwise participate in the recruiting process, please call us at ************ or send us an email at *****************. RSM does not intend to hire entry-level candidates who require sponsorship now or in the future. This includes individuals who will one day request or require RSM to file or complete immigration-related forms or prepare letters on their behalf in order for them to obtain or continue their work authorization. RSM will consider for employment qualified applicants with arrest or conviction records. For those living in California or applying to a position in California, please click here for additional information. At RSM, an employee's pay at any point in their career is intended to reflect their experiences, performance, and skills for their current role. The salary range (or starting rate for interns and associates) for this role represents numerous factors considered in the hiring decisions including, but not limited to, education, skills, work experience, certifications, location, etc. As such, pay for the successful candidate(s) could fall anywhere within the stated range. Compensation Range: $28 - $34 per hour

Job Summary The Manufacturing Engineer will play a key role in developing and sustaining production processes, equipment, and workflows that ensure components, subassemblies, and final products are manufactured safely, consistently, and in compliance with specifications and regulations. This role has architectural and system-level responsibility for the Manufacturing Execution System (MES), ensuring process traceability, conformance, and integration with Quality and Product Lifecycle Management (PLM) systems. The Manufacturing Engineer will also lead cross-functional initiatives with Product Engineering, Quality, Procurement, Operations, and Production to drive product conformity, efficiency, and continuous improvement. Essential Duties & Responsibilities An individual in this position must be able to successfully perform the following duties. Reasonable accommodation may be made to enable individuals with disabilities to perform these functions. Other duties may be assigned. Develop, implement, and train staff in safe, reliable, and ergonomic production processes, workflows, and equipment. Create and maintain assembly and manufacturing instructions within the MES to enable post-production audit confirmation where required. Design, implement, and sustain tooling and fixturing to ensure accurate, repeatable, and efficient production. Oversee tooling, fixturing, and test equipment documentation, identification, calibration, and maintenance requirements. Design production work cells using lean manufacturing principles (5S, poke yoke, visual factory, kanban) to create an efficient and intuitive environment. Provide primary oversight of the MES, ensuring full alignment with QMS and PLM requirements. Support calibration, preventative maintenance, and scalability planning for production systems and equipment. Identify and resolve process constraints in collaboration with production and engineering teams. Partner with operators and technicians to understand process concerns, prioritize improvements, and implement effective solutions. Lead and support internal and external product/process audits. Facilitate brainstorming and cross-departmental collaboration to ensure cohesive, effective manufacturing solutions. Qualifications Required: Bachelor's degree in manufacturing, Industrial, or related engineering field, OR 7+ years of equivalent experience. 5+ years of experience in a regulated manufacturing environment. Demonstrated ability to lead cross-functional projects to successful outcomes. Experience training and mentoring junior engineers and assembly technicians. Strong organizational, analytical, and communication skills. Proficiency in 3D CAD. Experience implementing and supporting MES systems. Familiarity with FAA or other highly regulated manufacturing requirements. Proficiency in Microsoft Office programs. Preferred: Proficiency with SolidWorks and PDM systems. ERP experience (Infor CloudSuite Industrial or similar). Experience with external machining, tooling, and automation vendors. Knowledge of Epicor eFlex MES and/or MQTT Protocol. Working Conditions Work will be performed in both office and aerospace production environments with PPE required as designated. This role requires mobility on the shop floor, including kneeling, squatting, and bending to evaluate processes and equipment. Occasional lifting of up to 40 lbs. from floor to bench height may be required. DeltaHawk Engines, Inc. is an equal employment opportunity employer, and all qualified applicants will receive consideration or employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, marital status, pregnancy, sexual orientation, ancestry, genetic information, or any other characteristic protected by law. PI5e7f61b08663-31181-38537683

Device Engineer Job Description:What You'll Be Doing: Perform development and verification for avionics products like Display, Air-Ground communication systems. High level requirements, Low Level Requirements creation, development and review. Perform HW/SW integration testing compliance to DO 178B/C. unit testing Agile mode execution, align and participate in Review process. Co-ordination with cross functional team What We Are Looking For: Requires in-depth knowledge and experience Solves complex problems; takes a new perspective using existing solutions Works independently; receives minimal guidance Acts as a resource for colleagues with less experience Represents the level at which career may stabilize for many years or even until retirement Contributes to process improvements Typically resolves problems using existing solutions Provides informal guidance to junior staff Works with minimal guidance What's In It for You: At Arrow, we recognize that financial rewards and great benefits are important aspects of an ideal job. That's why we offer competitive financial compensation, including various compensation plans and a solid benefits package. Medical, Dental, Vision Insurance 401k, With Matching Contributions Short-Term/Long-Term Disability Insurance Health Savings Account (HSA)/Health Reimbursement Account (HRA) Options Paid Time Off (including sick, holiday, vacation, etc.) Tuition Reimbursement Growth Opportunities And more! Work Arrangement Fully Onsite: Must be able to travel to an Arrow Client office location as requested by Arrow Client leadership. Location: Complete Onsite at US-WI-Oak Creek-Wisconsin About eInfochips: eInfochips, an Arrow company (Fortune #154), is a leading global provider of product engineering and semiconductor design services. A rich history of over two decades, with over 500+ products developed and 40M deployments in 140 countries, eInfochips continues to fuel technological innovations in multiple verticals. eInfochips has strategic technology partnerships with Qualcomm, NVIDIA, NXP, Analog Devices, Texas Instruments, Amazon, Microsoft and Google to name a few. Along with Arrow's $38B in revenues, 22,000 employees, and 345 locations serving over 80 countries, eInfochips is primed to accelerate connected products innovation for 150,000+ global clients. eInfochips acts as a catalyst to Arrow's Sensor-to-Sunset initiative and offers complete edge-to-cloud capabilities for its clients. Please visit ****************** for our portfolio of product engineering services across various industries & verticals. EEO Statement: Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. (Arrow EEO/AAP policy) Annual Hiring Range/Hourly Rate:- $137,500.00 Actual compensation offer to candidate may vary from posted hiring range based upon geographic location, work experience, education, and/or skill level. The pay ratio between base pay and target incentive (if applicable) will be finalized at offer. Location:US-WI-Oak Creek-Wisconsin (Astronautics) Time Type:Full time Job Category:Engineering ServicesEEO Statement: Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. (Arrow EEO/AAP policy) We anticipate this requisition will be open for a minimum of five days, though it may be open for a longer period of time. We encourage your prompt application. In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.

About Us Founded in 1908, Merz is a successful, family-owned specialty healthcare company with a rich history. As a leading global aesthetics business, our award-winning portfolio of injectables, devices, and skincare products empowers healthcare professionals to enhance confidence through aesthetic medicine. Our purpose is to fuel confidence by helping people look better, feel better, and live better. We believe you do not have to choose between living life and making a living. Live your best life with Merz Aesthetics. A Brief Overview Contributes to equipment projects and manufacturing process improvements. Provides insight and contributes to production reliability. Participates as a team member for technical operations sections of product development projects, including scale-up and production line design. Leads process development and equipment projects while maintaining schedules and meeting budgets. Success is measured through implementation of projects that meet desired outcome, budget, timeline, and manufacturing goals. What You Will Do Process design Coordinates implementation of manufacturing equipment, process automation, process expansions, and new initiatives. Includes project budgeting, design & interfacing with vendors of equipment and tooling, and maintaining appropriate documentation for new equipment and processes including qualification, verification, and validation. Process sustenance Identify production interruptions and establish risk mitigations. Troubleshoot equipment and processing issues in support of production goals. Determine calibration and maintenance needs of new equipment. Process evaluation Establish new product costs, develop and implement necessary SOP's, and establish processing, packaging and test specifications for products and equipment. Identify process inefficiencies and implement strategies, including automation and scale-up, to identified areas. Maintain Budgets Create and maintain project time lines and plans, accelerating where possible. Create project and/or capital budgets in cooperation with management to meet department budgets. Minimum Requirements Bachelor of Science (B.S.) in Biomedical Engineering, Mechanical Engineering, Chemical Engineering, or Physical Science. 1 year of relevant work experience. Preferred Qualifications Master of Science (M.S. or M.Sc.) in Engineering, Business, or related discipline. 3+ years of medical device or pharmaceutical process experience or similar experience in a regulated industry. Technical & Functional Skills Familiar with ISO 13485 / FDA QSR / GMP / Other medical industry regulations. Ability to formulate program strategy, budgets and timelines. Solidworks and/or AutoCAD. Six Sigma Methodologies. Statistical Analysis. Strong technical and problem-solving skills. Ability to communicate and write effectively. Benefits: Comprehensive Medical, Dental, and Vision plans 20 days of Paid Time Off 15 paid holidays Paid Sick Leave Paid Parental Leave 401(k) Employee bonuses And more! Your benefits and PTO start the date you're hired with no waiting period! Come join a company that is committed to being a trusted partner focused on our customers while not forgetting about our employees! This position is not eligible for employer-sponsored work authorization. Applicants must be legally authorized to work in the United States without the need for current or future employer-sponsored work authorization.

About Us Founded in 1908, Merz is a successful, family-owned specialty healthcare company with a rich history. As a leading global aesthetics business, our award-winning portfolio of injectables, devices, and skincare products empowers healthcare professionals to enhance confidence through aesthetic medicine. Our purpose is to fuel confidence by helping people look better, feel better, and live better. We believe you do not have to choose between living life and making a living. Live your best life with Merz Aesthetics. A Brief Overview Contributes to equipment projects and manufacturing process improvements. Provides insight and contributes to production reliability. Participates as a team member for technical operations sections of product development projects, including scale-up and production line design. Leads process development and equipment projects while maintaining schedules and meeting budgets. Success is measured through implementation of projects that meet desired outcome, budget, timeline, and manufacturing goals. What You Will Do * Process design Coordinates implementation of manufacturing equipment, process automation, process expansions, and new initiatives. Includes project budgeting, design & interfacing with vendors of equipment and tooling, and maintaining appropriate documentation for new equipment and processes including qualification, verification, and validation. * Process sustenance Identify production interruptions and establish risk mitigations. Troubleshoot equipment and processing issues in support of production goals. Determine calibration and maintenance needs of new equipment. * Process evaluation Establish new product costs, develop and implement necessary SOP's, and establish processing, packaging and test specifications for products and equipment. Identify process inefficiencies and implement strategies, including automation and scale-up, to identified areas. * Maintain Budgets Create and maintain project time lines and plans, accelerating where possible. Create project and/or capital budgets in cooperation with management to meet department budgets. Minimum Requirements * Bachelor of Science (B.S.) in Biomedical Engineering, Mechanical Engineering, Chemical Engineering, or Physical Science. * 1 year of relevant work experience. Preferred Qualifications * Master of Science (M.S. or M.Sc.) in Engineering, Business, or related discipline. * 3+ years of medical device or pharmaceutical process experience or similar experience in a regulated industry. Technical & Functional Skills * Familiar with ISO 13485 / FDA QSR / GMP / Other medical industry regulations. * Ability to formulate program strategy, budgets and timelines. * Solidworks and/or AutoCAD. * Six Sigma Methodologies. * Statistical Analysis. * Strong technical and problem-solving skills. * Ability to communicate and write effectively. Benefits: * Comprehensive Medical, Dental, and Vision plans * 20 days of Paid Time Off * 15 paid holidays * Paid Sick Leave * Paid Parental Leave * 401(k) * Employee bonuses And more! Your benefits and PTO start the date you're hired with no waiting period! Come join a company that is committed to being a trusted partner focused on our customers while not forgetting about our employees! This position is not eligible for employer-sponsored work authorization. Applicants must be legally authorized to work in the United States without the need for current or future employer-sponsored work authorization.

Charter Manufacturing is a fourth-generation family-owned business where our will to grow drives us to do it better. Join the team and become part of our family! Charter Casting is hiring a Process Engineer Intern! At Charter, we believe our culture is our strongest competitive advantage. Join our team, where you'll take on impactful projects, gain hands-on experience, and grow both personally and professionally. What Sets Our Internship Program Apart: Impactful Work & Growth: Contribute to meaningful projects that drive company goals while developing skills through mentorship, training, and networking. Compensation Benefits: Competitive compensation, receive weekly pay, and paid holidays. Career Advancement: Explore full-time employment opportunities across our four business divisions and corporate office, with adjusted service time if hired after graduation. Recognition & Culture: Join a workplace that celebrates achievements, values contributions, and invests in your future. Program Highlights: Experience our Intern Kickoff Day , Volunteer Opportunities , Professional Development Workshops , and the End of Summer Intern Showcase . Program Structure: Duration/Schedule: full-time during the summer months. Location: Woodstock - Onsite Start Date: May 2026 What We're Looking For: Enrollment in a four-year degree program in Engineering or a related field with current status of at least a Sophomore level. Cumulative GPA of 2.75 or higher. Proficient in Microsoft Office software: Excel, Word, and PowerPoint Strong verbal and written communication skills Strong interpersonal and relationship building skills. Ability to succeed in a team environment. Ability to handle multiple tasks. Preferred Experience: Advanced Excel and analyst skills. AutoCAD experience. Exposure to Lean manufacturing and Continuous Improvement Tools. What You'll Focus On: Assist in plant-related operational reporting. Participate in Continuous Improvement projects. Assist in other projects and function as a resource for other team members. Participate in safety and quality programs. Document and improve processes. #LI-AF1 #LI-Onsite The entry hourly rate for this position is $21.00 per hour. The actual base pay offered to the successful candidate will depend on various factors, including but not limited to job-related skills, experience, and qualifications. Compensation decisions are tailored to the unique circumstances of each position and candidate.Internship positions are not benefits-eligible.

Job Title: Quality Process Engineer Reports To: Quality Manager The Quality Process Engineer is responsible for developing, implementing, and maintaining quality assurance protocols and process improvements across manufacturing operations. This role ensures compliance with ISO:9001 standards and supports continuous improvement initiatives to enhance product quality and operational efficiency. Key Responsibilities: Develop and maintain quality control methodologies and documentation in alignment with ISO standards. Conduct internal audits and support external audits to maintain ISO certification. Manage CAPA (Corrective and Preventive Action) systems and drive resolution of non-conformances. Support new product launches with quality planning and risk assessments. Monitor and report on key performance indicators (KPIs) related to quality. Develop quality procedures, standards, and inspection of products and processes. Maintain and lead the Calibration System. Qualifications: Bachelor's degree preferred 2-3 years of experience in a quality engineering role, preferably in a manufacturing environment. Strong knowledge of ISO 9001 standards. Proficiency in quality tools such as FMEA, control plans, and root cause analysis. Certifications such as ASQ CQE, CQA, or ISO Lead Auditor are a plus. Excellent analytical, communication, and problem-solving skills. Preferred Skills: Familiarity with calibration systems and inspection equipment. Experience with leading Kaizen teams. Ability to lead cross-functional teams and manage multiple projects. Job Type: This is an in-person position requiring a 40-hour work week First Shift, Monday through Friday Benefits: 401(k) and company matching Health, Dental, and Vision insurance Flexible spending account Life insurance Paid time off

"Under the direction of the Director of Automation, the Automation Continuous Improvement Engineer is responsible for analyzing, developing, supporting, and documenting the ongoing continuous improvement projects within the Automation Engineering department to increase the efficiency, operation and readiness of the plants automation equipment. The CI Engineer will use Six Sigma tools to analyze and support recommendations for machine improvements and cost saving projects. " Essential Functions: Provide analytical data and documentation to support machine improvements that will lead to improved machine efficiencies. Collaborate and review suggested design improvements with Automation Engineer Design Team Ensure conformance to engineering codes, IATF16949 and HellermannTyton standards for quality Use CAD/SolidWorks software to create/modify and update drawing within the EPDM vault Use AB software to create/modify and update machine Programmable Logic Control programs as required. Modify and update CAD/SolidWorks files in accordance to standard processes in place in the department. Possess advanced skills with vision systems and integration for quality inspections. Build and develop strong working relationships with cross-functional teams to work towards common goals and projects outcomes defined by Operations plant management team. Participate in project hand off processes that require process optimization, process flow, and assisting with training as required. Evaluate high scrap machines/cells using problem solving techniques that could include analysis of material, tooling, process or equipment and prepare data to support recommendations/findings. Lead cross-functional teams to successful project completion outcomes, as directed by the Director of Automation and Operations management team. Recommend and implement measures to improve equipment performance, quality and production methods. Stay current with technology and industry standards Comply with all quality and safety regulations in compliance with OSHA and HellermannTyton policy Other Functions Travel could be required on a "as needed" basis Attend all meeting with cross-functional teams to review project work and direction Lend support through training and technical advice to help other technicians become more efficient. All employees entering the manufacturing area and other identified locations must wear the designated Personal Protective Equipment (PPE) as a condition of employment. Success in this role will require Use of SolidWorks/Cad System Use of AB Programmable Logic Control software as required Six Sigma methodologies and practices Project management skills and creating documentation Ensure conformance to ASME codes as required Follow all IATF16949 and company standards for quality and manufacturability Manage and leverage resources to complete projects on time and within budget Vision System Integration and control Ability to define problems, collect data, establish facts and draw valid conclusions to recommend improvements. Ability to effectively present information and respond to questions from groups, managers and fellow team members. Experience in communicating with suppliers and vendors Basic to advanced skills in pneumatic systems Advanced Programmable Logic Control knowledge What You'll Bring Bachelor of Science (B.S.) or equivalent from a four year college or technical school with 3+ years experience in Automation Design/Integration and Continuous Improvement projects involving automation. Ability to read and interpret documents such as technical specifications, schematics, and ladder logic Certified Six Sigma Green Belt is preferred Ability for overnight travel by air or land as needed. Must have a valid drivers license, with an acceptable driving record, along with adequate insurance #LI-MS1 #LI-Onsite By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position. HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Established in 1991, Collabera is one of the fastest growing end-to-end information technology services and solutions companies globally. As a half a billion dollar IT company, Collabera's client-centric business model, commitment to service excellence and Global Delivery Model enables its global 2000 and leading mid-market clients to deliver successfully in an increasingly competitive marketplace. With over 8200 IT professionals globally, Collabera provides value-added onsite, offsite and offshore technology services and solutions to premier corporations. Over the past few years, Collabera has been awarded numerous accolades and Industry recognitions including. • Collabera awarded Best Staffing Company to work for in 2012 by SIA. (hyperlink here) • Collabera listed in GS 100 - recognized for excellence and maturity • Collabera named among the Top 500 Diversity Owned Businesses • Collabera listed in GS 100 & ranked among top 10 service providers • Collabera was ranked: • 32 in the Top 100 Large Businesses in the U.S • 18 in Top 500 Diversity Owned Businesses in the U.S • 3 in the Top 100 Diversity Owned Businesses in New Jersey • 3 in the Top 100 Privately-held Businesses in New Jersey • 66th on FinTech 100 • 35th among top private companies in New Jersey *********************************************** Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description Responsibilities Include: • Provide technical expertise and apply advanced scientific knowledge and product design best practices to projects; determine design requirements and contribute to verification and validation plans including execution. • Responsible for timely project completion. • Participate in project planning, design reviews and risk assessments using formal risk analysis methodologies. • Evaluate and integrate relevant engineering advances for improving or solving problems • Understand the business implications of assigned products and processes and identifies engineering solutions compatible with business needs. • Apply advanced technical writing skills to produce reports and documents; writes independently and evaluates the writing of others. • Present results of projects. Qualifications Possesses educational qualifications and work experience as established by engineering schools, employers and licensing authorities for employment in the various disciplines of engineering, i.e. Mechanical, Electrical, Industrial, Manufacturing, Chemical etc. Experience level: 5-7 years. Additional Information All your information will be kept confidential according to EEO guidelines.

The Senior Casting Technology Manufacturing Engineer provides technical leadership for SX or equiax investment castings across the value stream. You will partner with suppliers and cross-functional teams to drive root cause problem solving, improve producibility, increase productivity, and deliver on business objectives. You will own supplier technical relationships, coach on internal processes/specs/methods, qualify new suppliers, and help develop and industrialize alternate casting technologies. **Job Description** **Roles and Responsibilities** + Provide process and product technical leadership for the Castings commodity, including SX or equiax investment castings. + Develop strong working relationships with casting supplier technical teams. + Partner with suppliers to identify and implement corrective actions to eliminate the cause and prevent recurrence. + Act as a change agent to advance world-class performance and standard work across the supply base. + Own supplier technical relationships; mentor suppliers on GE Aerospace processes, specifications, and methods; ensure compliance and capability. + Lead cross-functional problem solving, to identify true root cause and implement sustainable corrective and preventive actions. + Improve manufacturability through design-for-casting, specification clarity, and process capability improvements. + Clearly communicate progress, risks, challenges, and countermeasures to leadership and stakeholders. + Review and approve significant/special processes; ensure adherence to standards and qualification requirements. + Collaborate with Quality and Design Engineering to ensure new and changed processes meet established metrics; align with other commodities on strategy and objectives + Partner with suppliers and internal teams to interpret drawings/specifications, ensuring conformance and clarity. + Identify and onboard new suppliers; lead technical qualifications and readiness through Manufacturing and Quality Planning reviews and support supplier Castings Audits. + Ability to travel to supplier sites 30%-50% **Minimum Required Qualifications** + Bachelor's degree in Engineering (Materials/Metallurgy, Mechanical, Manufacturing, or related field) + Minimum of 5 years of materials engineering, castings, mechanical engineering or a related field **Desired Characteristics and Experience** + Additive manufacturing experience. + Metal Injection Molding (MIM) experience. + Proficiency with Siemens NX or comparable CAD. + Sand Castings Experience. + Titanium Experience. + Significant experience in investment castings (SX or equiax), with demonstrated yield, capability, and cost improvements + Hands-on expertise across investment casting special processes (wax, shell, melt/solidification control, heat treat, HIP, NDT) and specification compliance. + Strong problem solving and project management skills. + New Product Introduction experience. + Experience maturing technologies and processes. + Excellent communication and stakeholder management; ability to influence without authority + Humble learner: Respectful, receptive to feedback, agile, and continuously improving; seeks out diverse perspectives. + Transparent communicator: Shares critical information proactively; speaks with candor; engages constructively to resolve issues. + Focused and accountable: Fast learner with strong ownership; meets commitments and drives results against SQDC targets ( _Safety, Quality, Delivery and Cost in that order)_ . **Pay and Benefits:** + The salary range for this position is $ 116,000.00 - 155,000.00. The specific salary offered to a candidate may be influenced by a variety of factors including the candidate's experience, their education, and the work location. In addition, this position is eligible for a performance bonus/variable incentive plan. + GE provides a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes Company Retirement Savings and a 401K with Company matching, Life Insurance options, Disability coverage, paid time-off, EAP, and more. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Experience: 8+ Years What candidate will Be Doing: Perform development and verification for avionics products like Display, Air-Ground communication systems. High level requirements, Low Level Requirements creation, development and review. Perform HW/SW integration testing compliance to DO 178B/C. unit testing Agile mode execution, align and participate in Review process. Co-ordination with cross functional team Design, analyze, and develop product solutions using established programming languages, tools, and security baselines. Enhance and maintain development and testing frameworks to ensure reusability, scalability, stability, and optimal performance. Prepare and execute comprehensive test plans; develop automated and manual test scripts to validate new features and improve existing products. Conduct reviews in alignment with standards and perform analysis; troubleshoot and resolve product issues of moderate complexity. Document technical deliverables throughout the project lifecycle, including specifications, design documents, code comments, test cases, test reports, and release notes. Collaborate with other technical leads to develop unit test; ensure thorough documentation. Provide guidance and support to junior team members, fostering technical growth and collaboration. What We Are Looking For: Requires in-depth knowledge and experience Solves complex problems; takes a new perspective using existing solutions Works independently; receives minimal guidance Acts as a resource for colleagues with less experience Represents the level at which career may stabilize for many years or even until retirement Contributes to process improvements Typically resolves problems using existing solutions Provides informal guidance to junior staff Works with minimal guidance Experience / Education Typically requires 5-7 years of related experience with a 4 year degree; or 3 years and an advanced degree; or equivalent work experience. Work Arrangement Fully On-Site: Must be able to travel to an Arrow Client office location as requested by Arrow Client leadership. Location: US-WI-Oak Creek-Wisconsin What's In It for You: At Arrow, we recognize that financial rewards and great benefits are important aspects of an ideal job. That's whywe offer competitive financial compensation, including various compensation plans and a solid benefits package. Medical, Dental, Vision Insurance 401k, With Matching Contributions Short-Term/Long-Term Disability Insurance Health Savings Account (HSA)/Health Reimbursement Account (HRA) Options Paid Time Off (including sick, holiday, vacation, etc.) Tuition Reimbursement Growth Opportunities And more! About eInfochips: eInfochips, an Arrow company (Fortune #154), is a leading global provider of product engineering and semiconductor design services. A rich history of over two decades, with over 500+ products developed and 40M deployments in 140 countries, eInfochips continues to fuel technological innovations in multiple verticals. eInfochips has strategic technology partnerships with Qualcomm, NVIDIA, NXP, Analog Devices, Texas Instruments, Amazon, Microsoft and Google to name a few. Along with Arrow's $38B in revenues, 22,000 employees, and 345 locations serving over 80 countries, eInfochips is primed to accelerate connected products innovation for 150,000+ global clients. eInfochips acts as a catalyst to Arrow's Sensor-to-Sunset initiative and offers complete edge-to cloud capabilities for its clients. Please visit ****************** for our portfolio of product engineering services across various industries & verticals. EEO Statement: Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. (Arrow EEO/AAP policy) Annual Hiring Range/Hourly Rate: $ 120,000.00 - $128,710.00 Location:US-WI-Oak Creek-Wisconsin (Astronautics) Time Type:Full time Job Category:Engineering ServicesEEO Statement: Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. (Arrow EEO/AAP policy) We anticipate this requisition will be open for a minimum of five days, though it may be open for a longer period of time. We encourage your prompt application.

About Us Founded in 1908, Merz is a successful, family-owned specialty healthcare company with a rich history. As a leading global aesthetics business, our award-winning portfolio of injectables, devices, and skincare products empowers healthcare professionals to enhance confidence through aesthetic medicine. Our purpose is to fuel confidence by helping people look better, feel better, and live better. We believe you do not have to choose between living life and making a living. Live your best life with Merz Aesthetics. A Brief Overview Contributes to equipment projects and manufacturing process improvements. Provides insight and contributes to production reliability. Participates as a team member for technical operations sections of product development projects, including scale-up and production line design. Leads process development and equipment projects while maintaining schedules and meeting budgets. Success is measured through implementation of projects that meet desired outcome, budget, timeline, and manufacturing goals. What You Will Do * Process design Coordinates implementation of manufacturing equipment, process automation, process expansions, and new initiatives. Includes project budgeting, design & interfacing with vendors of equipment and tooling, and maintaining appropriate documentation for new equipment and processes including qualification, verification, and validation. * Process sustenance Identify production interruptions and establish risk mitigations. Troubleshoot equipment and processing issues in support of production goals. Determine calibration and maintenance needs of new equipment. * Process evaluation Establish new product costs, develop and implement necessary SOP's, and establish processing, packaging and test specifications for products and equipment. Identify process inefficiencies and implement strategies, including automation and scale-up, to identified areas. * Maintain Budgets Create and maintain project time lines and plans, accelerating where possible. Create project and/or capital budgets in cooperation with management to meet department budgets. Minimum Requirements * Bachelor of Science (B.S.) in Biomedical Engineering, Mechanical Engineering, Chemical Engineering, or Physical Science. * 1 year of relevant work experience. Preferred Qualifications * Master of Science (M.S. or M.Sc.) in Engineering, Business, or related discipline. * 3+ years of medical device or pharmaceutical process experience or similar experience in a regulated industry. Technical & Functional Skills * Familiar with ISO 13485 / FDA QSR / GMP / Other medical industry regulations. * Ability to formulate program strategy, budgets and timelines. * Solidworks and/or AutoCAD. * Six Sigma Methodologies. * Statistical Analysis. * Strong technical and problem-solving skills. * Ability to communicate and write effectively. Benefits: * Comprehensive Medical, Dental, and Vision plans * 20 days of Paid Time Off * 15 paid holidays * Paid Sick Leave * Paid Parental Leave * 401(k) * Employee bonuses And more! Your benefits and PTO start the date you're hired with no waiting period! Come join a company that is committed to being a trusted partner focused on our customers while not forgetting about our employees! This position is not eligible for employer-sponsored work authorization. Applicants must be legally authorized to work in the United States without the need for current or future employer-sponsored work authorization.

Under the direction of the Process Excellence Leader, the Process Excellence Intern is responsible for creating process documentation in Signavio. This position will review existing process documentation, verify accuracy, update collaboratively as needed, and transfer the updated process maps into a new system of record. Further responsibilities will include building process documentation to support an upcoming JDE 9.2 ERP upgrade. This position will learn how to create end-to-end process maps, work with a team to understand and document workflows, and learn how to manage a process repository. Essential Functions: Understand general process flow Take existing process documentation, verify accuracy within a swim lane, and update as needed Document process flow in Signavio " Other Functions: Other duties as assigned Key Competencies: Working knowledge of a process diagram flow Ability to connect with key stakeholders to verify workflows Qualifications (skills, knowledge, experience) Candidates should have an interest in both process management and improvement Candidates must also have excellent verbal and written communication skills Experience working with a SASS (software as a service) or an Oracle-based technology is helpful but not mandatory " Qualifications: Pursuing a bachelor's degree from an accredited college/university. Ability to multi-task, be flexible, adapt to changing requirements/deadlines/situations, and work non-standard hours as needed. Valid Driver's License with an acceptable driving record and adequate automobile insurance. Candidates should have an interest in both process management and improvement Candidates must also have excellent verbal and written communication skills Experience working with a SASS (software as a service) or an Oracle-based technology is helpful but not mandatory #LI-KN1 #LI-Hybrid By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position. HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.