Process engineer jobs in Oceanside, CA

Kennedy Jenks is seeking a Drinking Water Process Engineer to provide technical expertise and support for drinking water treatment projects. The ideal candidate will have experience in drinking water treatment technologies and regulations, with a strong interest in continuing to develop their skills in water treatment. This role offers opportunities to work alongside experienced engineers and support clients on a variety of water quality and treatment projects. Key Responsibilities: Provide technical support for drinking water treatment projects, including treatment process evaluation, process selection, and operations optimization. Assist in preliminary engineering studies and feasibility assessments for municipal drinking water treatment systems. Support project teams with design and technical contributions, including developing process flow diagrams and design criteria for water treatment facilities. Collaborate with client service managers by contributing technical insights during project meetings and presentations. Participate in research and process improvements related to water quality and treatment technologies. Provide input on water treatment facility performance evaluations and assist in operations optimization. Stay engaged in water-focused professional organizations and present technical material at conferences. Qualifications: Bachelor's or Master's degree in civil / environmental engineering, or related scientific discipline required. 7+ years of experience in drinking water treatment engineering Practical professional engineer (PE) license or ability to obtain licensure within one year of hire. License in one or multiple states (CA, CO, FL, HI, OR, TX, VA, WA) preferred. Strong familiarity with drinking water treatment regulations and technologies. Ability to work as part of a project team, supporting senior staff and contributing to technical deliverables. Strong communication skills and ability to convey technical information clearly to colleagues and clients. Kennedy Jenks supports a healthy work-life balance and utilizes a hybrid model of home and office work, with a minimum of two days per week in the office. This approach empowers our people to thrive, collaborate, and achieve their full potential. The salary range for this position is anticipated to be $110,000 to $140,000, and may vary based upon education, experience, qualifications, licensure/certifications and geographic location. This position is eligible for performance and incentive compensation. #LI-Hybrid

Job Details Irvine, CA Full Time 4 Year Degree $150000.00 - $160000.00 SalaryDescription Job Title: Principal Engineer, DS Process Development Principal Engineer I, DS Process Development Principal Engineer II, DS Process Development Principal Engineer III, DS Process Development Supervisor/Manager Title: Manager, DS Manufacturing Job Description Summary: Responsible for process development and manufacturing engineering activities. Act as an interface between R&D, pilot, and commercial manufacturing. Contributes to the Delivery System product life cycle. Optimization and development of new or current manufacturing processes Job Responsibilities: Technical engineering support for delivery systems to ensure process and equipment are characterized and scaled by utilizing new technology and standard work. Lead/support equipment, tooling, and fixture design for development and production activities. Identify and implement manufacturing process improvements internally and at contract manufacturers. Analyze and resolve complex manufacturing and compliance issues (CAPA, non-conformances, audit observations, etc.). Lead short-term and long-term manufacturing process improvement activities. Partner with Quality and R&D Engineers to develop and implement critical manufacturing processes. Process development of manufacturing processes and validations (IQ/OQ/PQ) for new product introduction and continuous improvement. Provide root cause analysis investigations and development/implement corrective actions for component and device nonconformance. Managing key suppliers and working directly with contract manufacturers. Provide technical support for design qualifications, design transfer, activities for regulatory submissions, product and process development and implementation of design control documents, and approval of product/process change. Manage all manufacturing-related aspects of the project within a team. Develop training and documentation materials (e.g., work instructions) for development and production activities. Provide real time production line support. Qualifications Required Education and Experience: A Bachelor of Science degree in Mechanical or Biomedical Engineering (or equivalent engineering degree) is required. Minimum of 12+ years' experience in Manufacturing or R&D Engineering is required with a preference in delivery systems or catheters. Level I, II, III DOE. Must have experience in the use of CAD (SolidWorks) packages. Knowledge of equipment qualification (IQ/OQ/PQ) and design verification (including statistical techniques used) in the medical device industry or other regulated industries is required. Must have experience in designing and implementing fixturing from design concept to a clinical/commercial production line. Must have experience in implementing equipment from parameter/settings origin to the production line. Knowledge and experience in Work Instruction creation and implementation. Skills and Abilities Required for This Job: Must have experience in the use of CAD (SolidWorks) packages. Must be able to work effectively and collaborate within cross-functional teams. Must be able to effectively articulate (verbally and in writing) results and conclusions to technical and non-technical personnel. Must have strong project management and documentation skills. Must take initiative and have the ability to conduct hands-on work. Must possess the ability to handle multiple tasks with high attention to detail. Benefits and Perks: Competitive medical, dental, and vision plans. Generous paid time off and company holidays. 401(k) plan with company match. Collaborative, mission driven work environment! Equal Employment Opportunity (EEO) Statement JenaValve is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, gender identity, or sexual orientation. Right to Work and E-Verify Statement JenaValve participates in E-Verify. We verify the identity and employment eligibility of all new hires through an electronic database maintained by the U.S. government. Learn more at *****************

This Process Development Engineer role in the Operations - Process Transfer group requires technical expertise in developing and troubleshooting manufacturing process in NPD and Sustaining, for oligonucleotides, Master Cell Banks, plasmids, transcripts, sub-assemblies, protein, final formulations and/or lyophilized finish product. In this role, you will: Lead the development, validation, transfer and implementation of new manufacturing processes; Plan and execute experiments to develop process parameters and / or bring resolution to investigations resulting from non-conformances; and Participate in new product development, scale-up and optimization projects and core teams. This is a fully onsite role based out of San Diego, CA. Essential Duties and Responsibilities Serve as subject matter expert (SME) in oligonucleotides, Master Cell Banks, plasmids, transcripts, sub-assemblies, protein, final formulations and/or lyophilized finish product GMP manufacturing. Troubleshoot complex manufacturing process problems. Define, monitor and analyzes process parameters and data (KPIs and CQAs). Ensure availability of equipment/instrumentation for GMP use. This includes coordination of associated IOQs, CCEs, internal maintenance/upkeep, instrumentation troubleshooting documentation, and instrument updates. Research, evaluate and purchase new raw material, instruments and equipment. Utilize root cause analysis to resolve non-conformances. Independently generate experiments to obtain root cause. Independently generates notebook studies, development reports, technical reports, development documents and manufacturing documents. Reviews validation protocols and reports as appropriate. Plan and execute CAPAs that result from non-conformance investigations. Develop, improve, validate and implements GMP manufacturing processes. Trains personnel in new manufacturing processes. Participates in the transfer of GMP processes to and from other manufacturing sites. Serves as SME oversight for outsourcing manufacturing. May represent department as Core Team or Extended Core Team member as part of New Product Introductions. Required Qualifications and Experience Minimum of a Bachelor's Degree, preferably in Chemical Engineering, Biomedical Engineering, or relevant fields. Minimum of 5 years of diagnostic product/process development/transfer experience in a regulated environment (Medical Device or Pharmaceutical) Required Skills Knowledge of GMP/GLP Certification in CQE / Six Sigma Green Belt highly preferred Working knowledge of QSR/QMS application Proficiency with MS Word and Excel Strong change control skills and ERP knowledge Ability to analyze data and come to valid scientific conclusions Ability to document technical work and lead investigations and improvements in a GMP environment Good technical writing skills and ability to prepare and present data Ability to work collaboratively with intra and interdepartmental teams. The annualized base salary range for this role is $78,300 to $122,400 and is bonus eligible. Final compensation packages will ultimately depend on factors including relevant experience, skillset, knowledge, geography, education, business needs, and market demand. Why Hologic? We are committed to making Hologic the company where top talent comes to grow. For you to succeed, we want to enable you with the tools and knowledge required and so we provide comprehensive training when you join as well as continued development and training throughout your career. If you have the right skills and experience, apply today! #LI-RF1 #mid-level Agency and Third Party Recruiter Notice: Agencies that submit a resume to Hologic must have a current executed Hologic Agency Agreement executed by a member of the Human Resource Department. In addition Agencies may only submit candidates to positions for which they have been invited to do so by a Hologic Recruiter. All resumes must be sent to the Hologic Recruiter under these terms or they will not be considered. Hologic, Inc. is proud to be an Equal Opportunity Employer inclusive of disability and veterans.

Company DescriptionJobs for Humanity is partnering with Supernal to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: Supernal Job Description Supernal is at the forefront of creating emerging mobility solutions that will foster the development of human-centered cities. We are designing a completely new electric vertical take-off and landing (eVTOL) aircraft tailored to the mobility needs of future cities. This allows passengers a seamless intermodal journey that safely transports them to their final destination. We fuse research in autonomy, robotics, aviation and services to define a new category of mobility for the world's communities. We believe in creative thinking and collaboration to help build a better mobility experience for everyone, improving people's ability to move - whether for work or play. What we do: The Materials & Process Engineer applies their technical knowledge and expertise in structural bonding to support components across our vehicle. This role works toward building and implementing conventional and novel materials and process solutions while working with our partners to ensure delivered hardware that meets requirements that leads to the certification and production of new AAM vehicles. This position collaborates with all Engineering verticals & Supply Chain teams during the design process. This position will be required to work on-site 5 days a week. What you can do: Author material specifications and process specifications that support manufacturing & ensure quality Evaluate materials across the vehicle to satisfy design requirements Support test plan execution for composites and structural bonding, method development, materials characterization, allowable generation, and design validation Author test reports and other summaries to communicate information to the broader engineering team Participate in design reviews for hardware components/assemblies Support supplier selection, development, qualifications, and ongoing evaluations Support the manufacture of hardware both in-house and at suppliers Participate in industry working groups, standards bodies, and relevant technical conferences and symposia to maintain awareness of technology developments & regulatory trends across academia and industry May require up to 25% of domestic and international travel Other duties as assigned What you can contribute: Bachelor's degree in STEM or related field required Minimum three (3) years of related experience (an equivalent combination of education and experience may be considered) Experience working with technicians Experience developing a Design of Experiments plan Experience running and analyzing data from analytical materials characterization equipment Technical knowledge in one or more of the areas of: adhesives, composites, structural bonding Hands on experience with composite layup and bonding Familiarity with 3D CAD software (CATIA, SolidWorks, NX, or similar) Familiarity with statistical software, including Minitab, JMP, or similar Knowledge of CMH-17, SAE, ASTM, and other standard bodies Proficiency in writing R&D work instructions and documentation of R&D work Proficiency MS Office Suite tools such as Word, Excel, Project & Visio Understanding of a “First Principles” approach to problem solving Proactive and efficient delivery of communication and follow-up Excellent organizational skills and attention to detail Must have the ability to independently prioritize and accomplish work in a timely manner You may also be able to contribute: Six Sigma Green Belt or higher preferred Any offer of employment is conditioned upon the successful completion of a background check. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, citizenship, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other category or class protected under applicable federal, state or local law. Individuals with disabilities may request a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation at: [email protected] This position may include access to certain technology and/or software source code subject to U.S. export controls laws and regulations. If an export authorization from an applicable US regulatory agency is required in connection with your employment, your employment is contingent upon Supernal's receipt of such regulatory authorization(s) and your continued compliance with all conditions and limitations pursuant to such authorization(s). Base pay offered may vary depending on skills, experience, job-related knowledge and location. This position is also eligible for a bonus as part of total compensation. The pay range for this position is:$133,120-$186,160 USD Click HERE or visit: *********************************** to view our benefits!

About Our Client: Accepting no less than the absolute best, our client has climbed to the top, gaining a reputation for both excellence and satisfaction. Working at this company will give you the opportunity to work with some of the top technical professionals in the industry who are bringing cutting-edge products to forefront. Offering results-driven people a place where they can truly make a difference on a daily basis, this is an opportunity you will not want to miss! Key Responsibilities: Recommending and implementing improvements to production processes, methods, and controls. Coordinating the manufacturing launch of new or revised products. Providing mentorship to team members to enhance their skills and performance. Leading projects related to tooling design and process development. Ensuring product and process quality by designing test methods, testing finished products, and performing process capability studies. Creating and approving product drawings and documentation to ensure accuracy and compliance. Establishing and performing verification and validation activities, including design verification testing, process validation, packaging validation, and shelf-life studies. Preparing product and process reports by collecting, analyzing, and summarizing test data. Evaluating and solving production problems to maintain efficiency and quality. Representing manufacturing in cross-functional meetings to facilitate collaboration. Ensuring new equipment and tooling meet process validation requirements according to established procedures. Targeting and implementing cost reduction initiatives to improve profitability. Training employees on current and new manufacturing processes to ensure compliance and skills development. Qualifications: Bachelor's degree in Engineering, Manufacturing, or a related field. Prior experience in manufacturing support roles in the medical device or healthcare industries. Relevant experience supporting process improvement and new product introductions. Proven ability to support manufacturing processes or projects. Strong understanding of process improvement, continuous improvement, and cost reduction initiatives. Experience in supporting NPI (New Product Introduction) and equipment/process launches. Proficiency with computer skills including Word, Excel, and SolidWorks Knowledge of medical devices, healthcare, or vascular device manufacturing. Familiarity with process development and equipment support. Experience with Vascular or Neurovascular product lines. NO C2C CANDIDATES Interested Candidates please apply on our website at https://jobs.jblresources.com. For more information about our services and great opportunities at JBL Resources, please visit our website: https://www.jblresources.com. JBL Resources is proud to have earned the reputation of being a premier provider of top talent professionals in the fields of engineering, human resources, logistics, operations, and supply chain management. As specialists in both permanent placement and contract services, our mission is to help companies and individuals become all they were created to be. **JBL is an Equal Opportunity Employer and E-Verify Company

Are you passionate about cutting-edge optical systems and advanced manufacturing processes? We're looking for a talented engineer to lead the development of innovative processes for grinding, polishing, shaping, and assembling optical components and systems. In this role, you'll drive process development, mentor junior team members, create robust documentation, and deliver precision-engineered results that meet the highest quality standards. If you thrive in a dynamic production environment and have expertise in optical fabrication, assembly, and test technologies, we invite you to bring your skills and experience to our team. Apply now and help us shape the future of optical manufacturing! Primary Duties & Responsibilities Process Development and Process Control: Leads development and implementation of new manufacturing processes, tooling, and test fixtures related primarily to the grinding, polishing, shaping, and assembly of optics and optical systems. Strong skills are required in the basic principles of optical fabrication. manufacturing processes and planning, assembly and test. Fabrication includes various blocking methods, fixture/tooling design, grinding, pitch polishing, pad polishing, HSPP generating, HSPP polishing, Diamond Turning, aspheric polishing, CP operation, Double-sided grinding, Double-sided polishing, CNC edging, and CNC shaping of optical components. Assembly includes alignment using both mechanical means and optical methods. Test includes interferometric characterization of surfaces: transmitted wave front, reflection, magnification, and other important characteristics of optical materials, components and systems. Manufacturing processes developed are robust against product specifications and support quoted cost. Key process variables are identified, characterized and controlled sufficiently to consistently result in acceptable quality and cycle times. Process variables reduction is continuously engaged. Process Documentation: Responsible for building and maintaining manufacturing process documentation for use by production personnel in the performance of their jobs. Manufacturing Process documentation includes Work Instructions, Routers, Bills of Materials (BOM's), ECN/ECO documentation, Standard Manufacturing Procedures (SMP), and data collection for the use of process development or End-Item Data Packages. The documentation packages must delineate the required steps in sufficient detail to successfully fabricate and test products as defined by customer and internal specifications. Personnel Development: Provides guidance and training to manufacturing engineers and junior technicians. Provides feedback through coaching and mentoring. Provides administrative and technical support to engineering and operations management. Estimating: Supports quoting activities by evaluating technical requirements, identifying exceptions, and preparing cost/hours estimates for customer quotes. Evaluates technical requirements, identifies technical risks, assesses manufacturability, and provides recommendations. Supports NPI, Production, Process Development, Process Improvement, Training, Capacity/Throughput analysis, and facility/equipment requirements in support of the product realization lifecycle. Education & Experience Minimum of 7 years of related experience working in a production manufacturing environment for IR lens and window manufacturing Bachelor's in Materials Engineering, Optical Engineering, Mechanical Engineering, Physics or Materials Science, preferred. Masters or Ph.D. in related technical fields is a strong plus Experience in conventional optical fabrication is desired Experience in assembly and test technologies is required Experience in IR ceramic materials & manufacturing is a strong plus Experience in optical assembly process development & metrology & tests are required Experience in preparing and maintaining drawings, procedures, process routers and Bills of Materials with full documentation and configuration control required. Hands on Manufacturing experience required Optical fabrication includes any of the following areas: grinding, pitch polishing, pad polishing, CNC generating, CNC polishing, Asphere polishing, MRF, CP operation, edging, and shaping of optical components. Test includes interferometric characterization of surfaces and transmitted wave front, MTF, stray light, focal length, magnification, and other important characteristics of optical materials, components, and systems Skills Strong verbal and written technical communication skills. Computer skills in word processing and spreadsheet software including MS Word, Excel, CAD software knowledge required (Solidworks preferred). Strong analytical, fault isolation, and problem-solving skills. Strong organization skills and attention to details required. Must be capable of reading blueprints. Experience in conventional optical fabrication, assembly, and test technologies are required. Optical fabrication includes various blocking methods, fixture/tooling design, grinding, pitch polishing, pad polishing, CNC generating, CNC polishing, Diamond Turning, aspheric polishing, CP operation, Double-sided grinding, Double-sided polishing, edging, and CNC shaping of optical components. Assembly includes alignment using both mechanical means and optical methods. Test includes interferometric characterization of surfaces: transmitted wave front, reflection, magnification, and other important characteristics of optical materials, components and systems. Experience with fabrication methodologies and development of processes on a variety of materials such as Ge, Si, ZnS, ZnSe, Sapphire, BK7, CaF2, BaF2, GaAs, Aluminum, and other exotic materials/ceramics. Experience with various optical and mechanical fabrication techniques and development for various sizes of windows, lenses, domes, prisms, waveplates, etc. in various materials above. Experience in process design, development and project planning is desired. Experience in preparing and maintaining drawings, procedures, process routers and Bills of Materials with full documentation and configuration control required. Must understand production flow and be capable of logically developing planning within this flow that correctly and efficiently builds product. Excellent track record in developing and training junior opticians to upper levels. Experience in setting up production cells, equipment onboarding, and facility layouts. Familiarity with equipment manufacturers, technology and capability, evaluation and selection of capital equipment. Working Conditions Routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and office machinery. Noise level - Usually moderate. Physical Requirements Walk. Occasionally move about inside the office to access file cabinets, office machinery, etc. Talking. Expressing or exchanging ideas by means of the spoken word. Those activities in which they must convey detailed or important spoken instructions to other employees accurately, loudly, or quickly. Hearing. Perceiving the nature of sounds at normal speaking levels with or without correction. Ability to receive detailed information through oral communication, and to make the discriminations in sound. Reaching. Extending hand(s) and arm(s) in any direction. Use hands/fingers to type/handle. Operating a computer and other office productivity machinery, such as a calculator, copy machine, and computer printer. Grasping. Applying pressure to an object with the fingers and palm. Stooping. Bending body downward and forward by bending spine at the waist. This factor is important if it occurs to a considerable degree and requires full motion of the lower extremities and back muscles. Lifting. Raising objects from a lower to a higher position or moving objects horizontally from position-to-position. This factor is important if it occurs to a considerable degree and requires substantial use of upper extremities and back muscles. Sedentary Work. Sedentary work involves sitting most of the time. Jobs are sedentary if walking and standing are required only occasionally, and all other sedentary criteria are met. Visual acuity. Specific vision abilities required by this job include close vision and ability to adjust focus. Safety Requirements All employees are required to follow the site EHS procedures and Coherent A&D EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent A&D: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent A&D is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Provide Process Engineering and Test Support as part of a multi-disciplinary product development team responsible for the design of systems for genetic analysis, with a focus on consumables. Develop methods for assembly of complex disposable devices (plastics joining, adhesives dispensing, precision assembly work, some use of automated equipment). Own and execute test plans verifying assembly performance against ship/store and use-case conditions. Optimize assembly processes through the execution of experimental plans, including statistical design of experiments. Support Critical Parameter Management, designing and executing experiments to evaluate the relationship of process inputs to assembly outputs. Establish windows for process variables leading to acceptable output metrics. Use precision measurement equipment to monitor part quality. Evaluate repeatability of metrology tools. Assist in troubleshooting product assembly processes, leveraging problem solving techniques such as fish bone an 8D analyses. Analyze and organize data for reports and discussion using Excel or Matlab. Communicate results of activities to the rest of the team using MS Word or Powerpoint. Skills: 2+ years of experience within an R&D or product manufacturing group Experience with products containing miniature/micro-fluidics and chemistry/assay components is advantageous. Education: B.S. in Mechanical Engineering, Bioengineering, Chemistry or related field Qualifications Process Engineering and Test Support as part of a multi-disciplinary product development team Develop methods for assembly of complex disposable devices (plastics joining, adhesives dispensing, precision assembly work, some use of automated equipment). Experience with products containing miniature/micro-fluidics and chemistry/assay components is advantageous. Additional Information All your information will be kept confidential according to EEO guidelines.

: Syner-G BioPharma Group is a science-led, strategic partner for life science companies. We provide integrated regulatory and biopharmaceutical development services spanning early development to post-market, along with operational strategy and support. With a global team of 400 employees across North America and India, our goal is to help our partners navigate the complexities of product development and accelerate their journey to market. We are a leading life sciences consultancy committed to advancing human health by helping organizations bring life-saving innovations to market faster, at scale, and with the highest quality. Our team partners with a diverse range of clients across the life sciences industry, supporting critical phases of the drug development lifecycle, from discovery and regulatory approval to technology transfer and the support in capital projects. We provide strategic guidance and hands-on expertise to streamline operations, enhance quality systems, and ensure regulatory compliance, empowering our clients to navigate complexity and deliver impactful therapies to patients worldwide. Syner-G BioPharma Group was recently honored with BioSpace's prestigious "Best Places to Work" 2025 award, for the second consecutive year, along with many other award-winning programs to make a career here truly life-enhancing. These recognitions are a testament to our commitment to fostering a positive and engaging work environment for our employees, with a particular emphasis on culture, career growth and development opportunities, financial rewards, leadership, and innovation. At Syner-G, we recognize that our team members are our most valuable asset. Join us in shaping the future, where your talents are valued, and your contributions make a meaningful impact. For more information, visit *********************** POSITION OVERVIEW We are seeking a Staff Process Engineer / Project Engineer with deep expertise in manufacturing and packaging equipment, process engineering, and project execution. This hybrid role combines technical leadership in process engineering with project management responsibilities to drive compliance, efficiency, and innovation across manufacturing operations. The ideal candidate will have a strong understanding of regulatory requirements, equipment commissioning, and cross-functional collaboration to support critical business initiatives. KEY RESPONSIBILITIES Reviewing equipment drawings and specifications to ensure alignment with process requirements and regulatory standards Creating, reviewing, and approving Turnover Packages (TOPs) and other commissioning documentation Verifying Owner-Furnished Contractor-Installed (OFCI) equipment lists for accuracy and completeness Scoping, selecting, and reviewing transmitters, sensors, and instrumentation for manufacturing and packaging equipment Supporting equipment commissioning and qualification activities, including FAT/SAT and IQ/OQ documentation Providing process engineering input during design reviews, equipment selection, and installation phases Maintain and enhance manufacturing and packaging quality systems to ensure compliance with FDA, EMA, and related regulations Develop and improve SOPs, work instructions, and quality documentation related to manufacturing and packaging processes with a focus on lifecycle management Lead and implement change management strategies for manufacturing and packaging, supporting product lifecycle changes and minimizing operational impact Manage and review equipment change requests to ensure timely, accurate, and compliant updates Collaborate with regulatory, quality, and manufacturing teams to evaluate and execute changes, supporting a first-time-right approach Plan, execute, and oversee manufacturing and packaging projects from concept through implementation, ensuring alignment with product launch timelines and regulatory requirements Develop project scopes, timelines, and resource plans to ensure seamless coordination with cross-functional teams Identify project risks and implement risk mitigation strategies including process improvements, supply chain redundancy, and regulatory compliance Analyze existing manufacturing and packaging workflows, identify opportunities for process improvements, and implement best practices to increase efficiency and reduce risk Drive continuous improvement initiatives to streamline manufacturing and packaging processes, enhancing compliance, productivity, and cost-effectiveness Provide technical expertise and troubleshooting support for manufacturing and packaging issues, including root cause analysis and corrective action planning Support manufacturing operations including support, issue trending, and improvement projects Ensure that all manufacturing and packaging specifications meet regulatory/process standards Serve as a key liaison between quality assurance, manufacturing, regulatory affairs, and supply chain to align manufacturing strategies with overall business objectives Support product launches, updates, and regulatory requirements by coordinating with cross-functional teams to achieve timely and compliant product releases Act as a product manager for manufacturing and packaging equipment, ensuring that product development aligns with market needs and regulatory standards Monitor market trends and competitor products to identify opportunities for innovation and improvement in manufacturing and packaging equipment Develop and maintain product roadmaps, ensuring alignment with business goals and customer needs Collaborate with marketing and sales teams to develop product positioning and messaging that differentiates our products in the market QUALIFICATIONS AND REQUIREMENTS Education Bachelor's degree in Engineering (Mechanical, Chemical, or Process), Regulatory Affairs, or a related field Technical Experience Minimum of 7-11 years of experience in pharmaceutical manufacturing and packaging, with specific expertise in process engineering and equipment management Strong background in equipment commissioning, instrumentation, and process validation Deep understanding of cGMP, FDA, EMA, and USP guidelines relevant to manufacturing and packaging Proficiency with quality systems including change control and quality events Demonstrated success in managing multiple projects in parallel Knowledge, Skills, and Abilities Excellent communication skills with the ability to work effectively across departments and influence stakeholders Strong project management skills, with the ability to manage multiple projects simultaneously Strong leadership and team management abilities Detail-oriented with strong analytical and problem-solving capabilities Ability to work in a fast-paced, dynamic environment ESSENTIAL FUNCTIONS Physical Demands Regular use of computer keyboard and mouse; reaching with hands and arms; talking and listening Frequent walking and sitting; occasional lifting of objects up to 25 pounds Occasional standing, stooping, or kneeling Specific vision abilities include close vision and the ability to adjust focus Work Environment Moderate noise level, indoor temperate environment, and bright lighting typical of an office setting TOTAL REWARDS PROGRAM We define total rewards as compensation, benefits, remote work/flexibility, development, recognition, and our culture with programs that support each of our reward pillars. This includes a market competitive base salary and annual incentive plan, robust benefit offerings, and ongoing recognition and career development opportunities. Employees also enjoy our generous flexible paid time off program, company-paid holidays, flexible working hours, and fully remote work options for most positions and the ability to work “almost anywhere”. However, if a physical work location is more for you, we have office locations in Greater Boston; San Diego, CA; Boulder, CO; and India. Applicants must have current work authorization when accepting a position at Syner-G. Currently, Syner-G is unable to sponsor or take over sponsorship of an employment Visa at this time. LEGAL STATEMENT: Syner-G BioPharma Group is proud to be an Equal Employment Opportunity and Affirmative Action employers. All employment decisions, including the recruiting, hiring, placement, training availability, promotion, compensation, evaluation, disciplinary actions, and termination of employment (if necessary) are made without regard to the employee's race, color, creed, religion, sex, pregnancy or childbirth, personal appearance, family responsibilities, sexual orientation or preference, gender identity, political affiliation, source of income, place of residence, national or ethnic origin, ancestry, age, marital status, military veteran status, unfavorable discharge from military service, physical or mental disability, or on any other basis prohibited by applicable law. Syner-G BioPharma is an E-Verify employer.

About Rivian Rivian is on a mission to keep the world adventurous forever. This goes for the emissions-free Electric Adventure Vehicles we build, and the curious, courageous souls we seek to attract. As a company, we constantly challenge what's possible, never simply accepting what has always been done. We reframe old problems, seek new solutions and operate comfortably in areas that are unknown. Our backgrounds are diverse, but our team shares a love of the outdoors and a desire to protect it for future generations. Role Summary In this role you will be responsible for developing and deploying process improvements across the product development organization. You will be expected to collaborate across the organization to develop a series of projects to improve the quality, efficiency and speed of the product development process. This role requires a high level of motivation, an understanding of product development and process improvement methodologies, and an ability to deliver measurable improvements to the organization. Responsibilities Identification of gaps, inefficiencies and other opportunities across the organization through x-functional collaboration Development and utilization of data to prioritize projects and communicate process effectiveness Project management through entire lifecycle of project deliverables Communication across the organization of roadmap, priorities and best practices Process expert within Rivian, providing direction and training to colleagues within the day-to-day workspace and championing optimism throughout the organization Qualifications Bachelor's or Master's degree in engineering discipline, computer science, or equivalent STEM subject 4+ years experience within automotive product development or similar field 2+ years experience in process development methods such as Lean, Six Sigma, or similar Open minded, adventurous and curious mindset Collaborative & results driven approach Self-motivated with high level of attention to detail Pay Disclosure Salary Range/Hourly Rate range for California Based Applicants: $121,500-$151,900 (actual compensation will be determined based on experience, location, and other factors permitted by law). Benefits Summary: Rivian provides robust medical/Rx, dental and vision insurance packages for full-time employees, their spouse or domestic partner, and children up to age 26. Coverage is effective on the first day of employment, and Rivian covers most of the premiums. Equal Opportunity Rivian is an equal opportunity employer and complies with all applicable federal, state, and local fair employment practices laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, sex, sexual orientation, gender, gender expression, gender identity, genetic information or characteristics, physical or mental disability, marital/domestic partner status, age, military/veteran status, medical condition, or any other characteristic protected by law. Rivian is committed to ensuring that our hiring process is accessible for persons with disabilities. If you have a disability or limitation, such as those covered by the Americans with Disabilities Act, that requires accommodations to assist you in the search and application process, please email us at candidateaccommodations@rivian.com. Candidate Data Privacy Rivian may collect, use and disclose your personal information or personal data (within the meaning of the applicable data protection laws) when you apply for employment and/or participate in our recruitment processes ("Candidate Personal Data"). This data includes contact, demographic, communications, educational, professional, employment, social media/website, network/device, recruiting system usage/interaction, security and preference information. Rivian may use your Candidate Personal Data for the purposes of (i) tracking interactions with our recruiting system; (ii) carrying out, analyzing and improving our application and recruitment process, including assessing you and your application and conducting employment, background and reference checks; (iii) establishing an employment relationship or entering into an employment contract with you; (iv) complying with our legal, regulatory and corporate governance obligations; (v) recordkeeping; (vi) ensuring network and information security and preventing fraud; and (vii) as otherwise required or permitted by applicable law. Rivian may share your Candidate Personal Data with (i) internal personnel who have a need to know such information in order to perform their duties, including individuals on our People Team, Finance, Legal, and the team(s) with the position(s) for which you are applying; (ii) Rivian affiliates; and (iii) Rivian's service providers, including providers of background checks, staffing services, and cloud services. Rivian may transfer or store internationally your Candidate Personal Data, including to or in the United States, Canada, the United Kingdom, and the European Union and in the cloud, and this data may be subject to the laws and accessible to the courts, law enforcement and national security authorities of such jurisdictions. Please note that we are currently not accepting applications from third party application services. Bachelor's or Master's degree in engineering discipline, computer science, or equivalent STEM subject 4+ years experience within automotive product development or similar field 2+ years experience in process development methods such as Lean, Six Sigma, or similar Open minded, adventurous and curious mindset Collaborative & results driven approach Self-motivated with high level of attention to detail Identification of gaps, inefficiencies and other opportunities across the organization through x-functional collaboration Development and utilization of data to prioritize projects and communicate process effectiveness Project management through entire lifecycle of project deliverables Communication across the organization of roadmap, priorities and best practices Process expert within Rivian, providing direction and training to colleagues within the day-to-day workspace and championing optimism throughout the organization

Plans, directs, coordinates, and performs a wide variety of duties in the determination, implementation, optimization, and continuous improvement of new and existing manufacturing processes. Emphasis will be upon the design, fabrication, and implementation of automated and semi-automated processes ESSENTIAL JOB FUNCTIONS Identify and implement new automated processes into manufacturing Develop new processes or improve existing processes and layouts to improve process capability, yield, ergonomics, safety, reliability, and quality Analyze existing processes and implement modifications to reduce costs through improved manufacturability and process ability, efficiency, simplification, and standardization Troubleshoot product, facility, equipment, process, and quality problems and design and implement appropriate solutions Develop and write operation and maintenance instructions and manuals Maintain reliable and consistent attendance, including being punctual and dependable, in order to meet the needs of the department and the organization. Execute each essential duty satisfactorily in order to perform the job successfully. Follows all safety procedures required in the work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receiving and giving feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follow all department quality standards/criteria. Raise concerns and issues to the immediate manager. Able to understand and demonstrate the Cambro company culture, display the company's core values (Safety, Quality, Respect, and Service). Understands the department's key performance indicators and contributes to achieving these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. Hot Stamp design, process, and Hot stamp fixture design REQUIRED QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Bachelor of Science degree in Mechanical, Manufacturing, Automation, or Industrial Engineering or verifiable experience and vocational training in automation applications Minimum 7+ years of manufacturing engineering experience. Ability to apply concepts of advanced math and geometry, including statistics. Must be able to analyze and make decisions based on collected data. 2D or 3D drawing capability for automated equipment design on AutoCAD or SolidWorks is required Basic knowledge and understanding of most industrial codes required (ANSI, ADA, OSHA, NEC, NFPA, IBC, ISO, DIN) Ability to design and write electrical schematics Ability to design, fabricate, and wire electrical control panels Familiarity with Microsoft Word, Excel, Project, and PowerPoint. Ability to create and edit text documents, spreadsheets, presentations, and schedules Digital photography and file manipulation of digital images experience required Working knowledge of pneumatic control circuits and electro-pneumatic troubleshooting, electrical control panel assembly and wiring, electrical control circuit design and troubleshooting, Ability to manage multiple conflicting and sometimes changing priorities. Has the ability to adapt quickly to new projects and assignments while being dedicated and an innovative problem solver. Is also a creative thinker who is results-oriented, focused, and attentive to detail and accuracy. PREFERRED QUALIFICATIONS Knowledge of safe operation of conventional mills and lathes for the fabrication of machine components and fixtures. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes, or chemicals Working at heights Use of special visual or auditory protective equipment PPE Requirements Safety glasses Steel-toe slip-resistant shoes Hearing protection (e.g. earplugs, earmuffs) . COMPENSATION RANGE: $85,000 - $110,000 Salary may vary based on experience. CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. The Materials & Process Engineering internship program within Gas Turbine Product Engineering is designed to provide students with challenging assignments within gas turbine product design and development activities. Our organization is built from diverse engineering functions including Mechanical Design, Materials and Process Engineering, Gear and Rotor Systems Engineering, Condition Based Engineering, Aftermarket Engineering, and Turbine Production Engineering. Under the guidance of a mentor, interns are given a meaningful work experience, a project assignment to complete, and the opportunity to apply classroom education to real industry situations. Responsibilities include but not limited to: * Conducting materials research and analysis to support the development of new gas turbine components. * Performing failure analysis to identify root causes and recommend corrective actions. * Supporting design changes for product improvements with a focus on materials and processes. * Assisting in engine assembly support, production test support, and manufacturing support. * Developing and utilizing design tools for materials engineering applications. * Engaging in analytical simulations (FEA) and development engine or component testing. Minimum Qualifications: * Currently in the process of obtaining a 4 year or advanced degree in Materials Engineering or other relevant degree. * Classified by your school as either a Sophomore, Junior, Senior planning to attend graduate school, or currently attending graduate school. * Overall cumulative GPA of at least 2.8 on a 4.0 scale. Preferred Qualifications: * Previous co-op/internship experience. * Problem solving skills. * High energy level and sense of urgency. * Strong verbal and written communication skills. * Good business / technical judgment. * Ability to handle multiple priorities for a variety of tasks. Compensation: The hourly compensation for this role is $26.00-$43.00. Actual compensation will be determined by graduation year and degree type. #2026ETPosting This position requires working onsite five days a week. Relocation is available for this position. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at **************************** Posting Dates: October 28, 2025 - December 31, 2025 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Rock West Composites, Inc. has an exciting opportunity for a Material, Process and Test Engineer. Rock West Composites, Inc. is an engineering and manufacturing company dedicated to providing innovative solutions for commercial and government customers. This position is located in our San Diego HQ office at 7625 Panasonic Way San Diego, CA and reports to the Director of Engineer. Position Summary: Support engineering departments in the characterization, development, and documentation of advanced composite materials. Assist in devising and conducting structural, thermal, and chemical/cure testing of composite materials and structures in support of programs and engineering. Support the acquisition and installation of testing equipment as needed to support enterprise technical objectives. Create and implement testing procedures as needed to perform mechanical tests of composites in a controlled, compliant and consistent manner. Improve manufacturing efficiency and the quality of engineered products through standardization and process control to meet enterprise objectives. Essential Functions: Specify and oversee testing of composite coupons and structures at outside test labs to meet program requirements regarding accuracy and compliance. Testing to include mechanical properties, thermal exposure, and chemical/cure analysis. Assist in procurement and installation of mechanical test and data acquisition equipment enabling coupon-level tests of composite materials. Accomplish same to test structural components/assemblies to customized load conditions. Able to define and work within budgets allocated for labor hours and mechanical testing equipment. Conduct mechanical testing of composite specimens and structures; and/or oversee technicians who conduct such tests. Assist in creating/documenting internal standards/templates and specifications for performing mechanical tests, thermal conditioning (e.g. thermal vacuum) and chemical/cure analysis (e.g., DMA, resin content, fiber volume). Write clear, concise test reports documenting test data, test methods, etc. Able to gather technical inputs from senior composites engineers and combine into clear, cohesive standards for testing materials and structures including layup, curing, machining, material storage and shipping. Assist in creating standards and specifications for buying and processing composite materials for high-requirement programs. Explore new materials and alternative manufacturing processes. Identify areas for improvement in materials and structural testing. Understands classical lamination theory. Competent in Microsoft Office applications - MSWord, Excel, PowerPoint. Good communication skills, both verbal and technical writing. Non-Essential Functions: Ability to work with Quality Assurance to document data to meet customer flow down requirements (i.e., inspection, test and verification methods with clearly defined acceptance criteria). Ability to generate MS Project schedules time phased to address near-term action items. Required Education and Experience: BS in Mechanical (or similar) and a minimum of 3 years of engineering experience (composites Preferred) MS in Mechanical or Materials Science Engineering (or similar) Perks and Benefits: 100% Employer Paid Medical and Dental Annual Bonus 401K - 5% match Employee Stocks Option Program 9/80 work schedule 8- paid Holidays PTO: Max. 4-weeks after 5 years of employment $2,500 tuition reimbursement Compensation: The compensation range for this position falls within $85,000 and $110,000. The final compensation will be determined based on experience, skillset, and other factors permitted by law. Why should you want to work with us? Rock West Composites cares about our employees! Not only do we offer great benefits to our full-time employees (Medical & Dental 100% employer paid, Vision, Paid Time Off and 401K match), we offer a fun and friendly working environment! Rock West Composites is an Equal Opportunity Employer. It is the policy of the company to provide equal opportunity for all employees and applicants for employment without regard to race, color, creed, religion, gender, sexual orientation, national origin, age, marital status or any other basis prohibited by state or federal law. Due to nature of defense contracts, US Citizenship is a requirement. As part of our Drug and Alcohol Policy, upon acceptance of any offer of employment, employment will be conditional of passing a required drug test. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact ************.

The Company Dexcom Corporation (NASDAQ DXCM) is a pioneer and global leader in continuous glucose monitoring (CGM). Dexcom began as a small company with a big dream: To forever change how diabetes is managed. To unlock information and insights that drive better health outcomes. Here we are 25 years later, having pioneered an industry. And we're just getting started. We are broadening our vision beyond diabetes to empower people to take control of health. That means personalized, actionable insights aimed at solving important health challenges. To continue what we've started: Improving human health. We are driven by thousands of ambitious, passionate people worldwide who are willing to fight like warriors to earn the trust of our customers by listening, serving with integrity, thinking big, and being dependable. We've already changed millions of lives and we're ready to change millions more. Our future ambition is to become a leading consumer health technology company while continuing to develop solutions for serious health conditions. We'll get there by constantly reinventing unique biosensing-technology experiences. Though we've come a long way from our small company days, our dreams are bigger than ever. The opportunity to improve health on a global scale stands before us. Meet the team: As a member of the Advanced Research & Technology (ART) Team you will support the evaluation of new technologies through testing, modeling, analysis, prototyping, and experimentation. Working as a member of a technology team, this engineer will collaborate and communicate with other engineers and scientists on the team as well as interface with technical personnel from other departments and vendors. This position offers a unique opportunity to have significant impact towards defining Dexcom's development roadmap and influencing the lives of millions of people within a small team of engineers. Where you come in: Design, setup, plan, and perform electrical, mechanical, or related experiments in the lab Design, fabricate, document, and troubleshoot new test fixtures and equipment Improve and/or optimize existing test equipment, fixtures, and methods Support development of new or improved test methods simulating actual product use conditions Generate and execute test protocols leveraging statistical best practices, documenting the results Analyze experimental data to build statistically sound models and develop conclusions Provide design recommendations while also acknowledging potential tradeoffs of solutions Build and evaluate prototypes What makes you successful: Comfortable working hands-on in a fast-paced environment Comfortable managing several parallel activities High Proficiency with engineering software tools for CAD (SolidWorks required) High Proficiency with statistical analysis (DOE, Gauge R&R, ANOVA, Power and Sample Size) Ability to deal with ambiguity/uncertainty and a willingness to try new/challenging things Strong interpersonal and teamwork skills Demonstrated written and verbal communication skills Familiarity with DMAIC problem solving techniques Familiarity with FEA tools (Abaqus preferred) Familiarity with JMP or Minitab (JMP preferred) Familiarity with programming (LabView preferred) Familiarity with image processing techniques Familiarity with control systems (actuators, pneumatics, sensors, etc.) Familiarity operating equipment within a machine shop (Mill, Lathe, etc.) Experience working within a regulated medical device environment Proficiency with Microsoft Office Products Basic skills or knowledge related to product, process, equipment, and fixture design, development and improvement What you'll get: A front row seat to life changing CGM technology. Learn about our brave #dexcomwarriors community. A full and comprehensive benefits program. Growth opportunities on a global scale. Access to career development through in-house learning programs and/or qualified tuition reimbursement. An exciting and innovative, industry-leading organization committed to our employees, customers, and the communities we serve. Travel Required: 0-5% Experience and Education Requirements: • Typically requires a Bachelor's degree in a technical discipline, and a minimum of 8- 12 years related experience or Master's degree and 5-7 years equivalent industry experience or a PhD and 2-4 years of experience. Please note: The information contained herein is not intended to be an all-inclusive list of the duties and responsibilities of the job, nor are they intended to be an all-inclusive list of the skills and abilities required to do the job. Management may, at its discretion, assign or reassign duties and responsibilities to this job at any time. The duties and responsibilities in this job description may be subject to change at any time due to reasonable accommodation or other reasons. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Dexcom's AAP may be viewed upon request by contacting Talent Acquisition at ****************************. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact Dexcom Talent Acquisition at ****************************. Meritain, an Aetna Company, creates and publishes the Machine-Readable Files on behalf of Dexcom. To link to the Machine-Readable Files, please click on the URL provided: ***************************************************** Code=MERITAIN_I&brand Code=MERITAINOVER/machine-readable-transparency-in-coverage?reporting EntityType=TPA_19874&lock=true To all Staffing and Recruiting Agencies: Our Careers Site is only for individuals seeking a job at Dexcom. Only authorized staffing and recruiting agencies may use this site or to submit profiles, applications or resumes on specific requisitions. Dexcom does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to the Talent Acquisition team, Dexcom employees or any other company location. Dexcom is not responsible for any fees related to unsolicited resumes/applications. Salary: $128,600.00 - $214,400.00

CRB's nearly 1,400 expert professionals drive innovative, life-changing and life-saving solutions for manufacturers in the life sciences and food and beverage industries. Our mission, vision, and core values put client satisfaction and employee experience at the center of everything we do. As an AEC firm, we proudly specialize in industries that inherently carry important social responsibility - we recognize our impact and influence in the communities we serve and pursue corporate responsibility through the lens of people, community, and planet. From oncology and rare disorders to COVID-19 or alternative proteins, our design and construction projects are pioneering solutions addressing important issues such as food scarcity and global health. Job Description We are actively seeking a Process Engineer Intern to join CRB. Join our firm for an internship journey where you'll dive into real-world project work, learn from industry leaders and fully immerse yourself in the CRB employee experience. This program is more than just an internship-it's an opportunity to grow, innovate, and make a tangible impact on how we do business. You'll have the chance to work hands-on with cutting-edge projects, collaborate with peers and industry leaders, and contribute your unique perspective to spark meaningful change. At CRB, we believe that learning should be as dynamic as it is engaging, and that work can be both challenging and enjoyable. Join us to expand your horizons, build lasting relationships, and experience what it truly means to be part of a team that's dedicated to innovation and excellence. How will I contribute? As a Process Engineer Intern, you will work under the direction of an assigned Process Engineer mentor to develop and implement project deliverables. Project sizes will vary and consist mainly of pharmaceutical, biotech, food and beverage, or industrial projects including existing building renovations/retrofits and new construction. Our Process engineering team focuses on the design and engineering of manufacturing facilities and equipment, supporting facility infrastructure and critical utility systems. They are responsible for supporting the documentation of the process design scope in coordination with other disciplines. Core Responsibilities * Developing project documents and deliverables such as: * Block & Process Flow Diagrams * User Requirements Specifications * Equipment List * Equipment General Arrangements * Equipment Datasheets * Utility Summary * Piping and Instrumentation Diagrams * Plans, schedules, and installation details and specifications in coordination with manufacturing partners and trade partners * Assisting with the development of conceptual designs and coordinating with the design team under the direction of the project manager * Work with cross-functional teams, including architects, engineers and construction to ensure seamless project execution. Communicate findings and recommendations effectively to stakeholders. Qualifications Qualifications: * Currently pursuing a Bachelor's or Master's degree in Mechanical Engineering, Chemical Engineering, Bioprocess Engineering, or Biochemical Engineering from an accredited program * Available to work full-time during the internship period: May-August 2026 * Proficiency in Microsoft Office Suite (Outlook, Word, Excel, PowerPoint, OneNote) * Strong interest in the Food & Beverage or Life Sciences industries * Excellent problem-solving skills with the ability to analyze complex data and develop actionable insights * Strong communication and collaboration skills, with the ability to work effectively across disciplines and with internal and external stakeholders (vendors, clients, contractors) * Eagerness to learn about the AEC industry and apply academic knowledge to real-world engineering applications * Willingness to relocate or work in one of CRB's internship locations, which may include: Kansas City (MO), Raleigh (NC), Orange County (CA), Philadelphia (PA), St. Louis (MO), Boston (MA), San Diego (CA), Kalamazoo (MI), Denver (CO), and/or Rockville (MD) Preferred Qualifications * Working towards Fundamental of Engineering Exam registration or completion preferred * Familiarity with AutoCAD, Revit and 3D collaboration tools (Navisworks, BIM360 Suite, Assemble) * Experience with process optimization and lean manufacturing principles * Familiarity with industry-specific regulations and standards within the AEC industry * Prior internship or co-op experience in Process Engineering or related field Additional Information All your information will be kept confidential according to EEO guidelines. CRB is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. Employment is contingent on background screening. CRB does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CRB without a prior written search agreement will be considered unsolicited and the property of CRB. Please, no phone calls or emails. CRB offers a complete and competitive benefit package designed to meet individual and family needs. If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Kennedy Jenks is seeking a Drinking Water Process Engineer to provide technical expertise and support for drinking water treatment projects. The ideal candidate will have experience in drinking water treatment technologies and regulations, with a strong interest in continuing to develop their skills in water treatment. This role offers opportunities to work alongside experienced engineers and support clients on a variety of water quality and treatment projects. Key Responsibilities: Provide technical support for drinking water treatment projects, including treatment process evaluation, process selection, and operations optimization. Assist in preliminary engineering studies and feasibility assessments for municipal drinking water treatment systems. Support project teams with design and technical contributions, including developing process flow diagrams and design criteria for water treatment facilities. Collaborate with client service managers by contributing technical insights during project meetings and presentations. Participate in research and process improvements related to water quality and treatment technologies. Provide input on water treatment facility performance evaluations and assist in operations optimization. Stay engaged in water-focused professional organizations and present technical material at conferences. Qualifications: Bachelor's or Master's degree in civil / environmental engineering, or related scientific discipline required. 7+ years of experience in drinking water treatment engineering Practical professional engineer (PE) license or ability to obtain licensure within one year of hire. License in one or multiple states (CA, CO, FL, HI, OR, TX, VA, WA) preferred. Strong familiarity with drinking water treatment regulations and technologies. Ability to work as part of a project team, supporting senior staff and contributing to technical deliverables. Strong communication skills and ability to convey technical information clearly to colleagues and clients. Kennedy Jenks supports a healthy work-life balance and utilizes a hybrid model of home and office work, with a minimum of two days per week in the office. This approach empowers our people to thrive, collaborate, and achieve their full potential. The salary range for this position is anticipated to be $110,000 to $140,000, and may vary based upon education, experience, qualifications, licensure/certifications and geographic location. This position is eligible for performance and incentive compensation. #LI-Hybrid

Jobs for Humanity is partnering with Supernal to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: Supernal Job Description Supernal is at the forefront of creating emerging mobility solutions that will foster the development of human-centered cities. We are designing a completely new electric vertical take-off and landing (eVTOL) aircraft tailored to the mobility needs of future cities. This allows passengers a seamless intermodal journey that safely transports them to their final destination. We fuse research in autonomy, robotics, aviation and services to define a new category of mobility for the world's communities. We believe in creative thinking and collaboration to help build a better mobility experience for everyone, improving people's ability to move - whether for work or play. What we do: The Materials & Process Engineer applies their technical knowledge and expertise in structural bonding to support components across our vehicle. This role works toward building and implementing conventional and novel materials and process solutions while working with our partners to ensure delivered hardware that meets requirements that leads to the certification and production of new AAM vehicles. This position collaborates with all Engineering verticals & Supply Chain teams during the design process. This position will be required to work on-site 5 days a week. What you can do: Author material specifications and process specifications that support manufacturing & ensure quality Evaluate materials across the vehicle to satisfy design requirements Support test plan execution for composites and structural bonding, method development, materials characterization, allowable generation, and design validation Author test reports and other summaries to communicate information to the broader engineering team Participate in design reviews for hardware components/assemblies Support supplier selection, development, qualifications, and ongoing evaluations Support the manufacture of hardware both in-house and at suppliers Participate in industry working groups, standards bodies, and relevant technical conferences and symposia to maintain awareness of technology developments & regulatory trends across academia and industry May require up to 25% of domestic and international travel Other duties as assigned What you can contribute: Bachelor's degree in STEM or related field required Minimum three (3) years of related experience (an equivalent combination of education and experience may be considered) Experience working with technicians Experience developing a Design of Experiments plan Experience running and analyzing data from analytical materials characterization equipment Technical knowledge in one or more of the areas of: adhesives, composites, structural bonding Hands on experience with composite layup and bonding Familiarity with 3D CAD software (CATIA, SolidWorks, NX, or similar) Familiarity with statistical software, including Minitab, JMP, or similar Knowledge of CMH-17, SAE, ASTM, and other standard bodies Proficiency in writing R&D work instructions and documentation of R&D work Proficiency MS Office Suite tools such as Word, Excel, Project & Visio Understanding of a “First Principles” approach to problem solving Proactive and efficient delivery of communication and follow-up Excellent organizational skills and attention to detail Must have the ability to independently prioritize and accomplish work in a timely manner You may also be able to contribute: Six Sigma Green Belt or higher preferred Any offer of employment is conditioned upon the successful completion of a background check. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, citizenship, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other category or class protected under applicable federal, state or local law. Individuals with disabilities may request a reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation at: [email protected] This position may include access to certain technology and/or software source code subject to U.S. export controls laws and regulations. If an export authorization from an applicable US regulatory agency is required in connection with your employment, your employment is contingent upon Supernal's receipt of such regulatory authorization(s) and your continued compliance with all conditions and limitations pursuant to such authorization(s). Base pay offered may vary depending on skills, experience, job-related knowledge and location. This position is also eligible for a bonus as part of total compensation. The pay range for this position is: $133,120 - $186,160 USD Click HERE or visit: *********************************** to view our benefits!

We are seeking a Lead Process Development Engineer to drive the development and implementation of advanced assembly manufacturing processes, tooling, and test fixtures, with a focus on optics and optical systems. The ideal candidate will have experience with infrared (IR) optical systems and a strong understanding of fabrication processes for IR optics. Primary Duties & Responsibilities Process Development and Process Control: Under limited supervision, leads development and implementation of new manufacturing processes, tooling, and test fixtures related to assembly of optics and optical systems. Strong skills are desired in the basic principles of optical fabrication, assembly and test. Fabrication includes grinding, pitch polishing, pad polishing, CNC generating, CNC polishing, Asphere polishing, MRF, CP operation, edging, and shaping of optical components. Assembly includes alignment using both mechanical means (fixtures, physical measurement of edge location) and optical (alignment telescopes, autocollimators, computerized alignment stations). Test includes interferometric characterization of single and multiple surfaces, MTF, stray light, focal length, magnification, and other important characteristics of optical materials, components, and systems. Manufacturing processes developed are robust against product specifications and support quoted cost. Key process variables are identified, characterized, and controlled sufficiently to consistently result in acceptable quality and cycle times. Process variables reduction is continuously engaged. Process Documentation: Responsible for building and maintaining manufacturing process documentation for use by production personnel in the performance of their jobs. Manufacturing Process documentation includes Work Order Release (WOR) packages including manufacturing Process Plans (Routers) and Bills of Materials (BOM's), and RCN, ECO, and NOR change order documentation. The WOR packages must delineate the required steps in sufficient detail to successfully fabricate, coat, assemble and test COHERENT A&D products as defined by customer and COHERENT A&D specifications. In addition, Process Development Engineering is responsible for maintaining and updating support documentation including Standard Manufacturing Procedures (SMP's), inspections, manufacturing drawings and special processes. Estimating: Supports quoting activities by evaluating technical requirements, identifying exceptions, and preparing cost estimates for customer quotes. Production Readiness Review: Serves as a liaison to Engineering department. Supports Design for Manufacturing efforts by evaluating technical requirements, identifying technical risks, assessing manufacturability, and providing design change recommendations. Facilitates Process Failure Mode Analysis (PFMEA). Education & Experience Minimum 7 years experience working in a production manufacturing environment for IR lens and window manufacturing. Bachelors degree in Optical Engineering, Mechanical Engineering, Physics or Materials Science, preferred. Masters or Ph.D. in related technical fields is a strong plus. Experience in conventional optical fabrication is desired. Experience in assembly and test technologies is required. Optical fabrication includes any of the following areas: grinding, pitch polishing, pad polishing, CNC generating, CNC polishing, Asphere polishing, MRF, CP operation, edging, and shaping of optical components. Test includes interferometric characterization of surfaces and transmitted wave front, MTF, stray light, focal length, magnification, and other important characteristics of optical materials, components, and systems Experience in IR ceramic materials & manufacturing is a strong plus Experience in optical assembly process development & metrology & tests are required. Experience in preparing and maintaining drawings, procedures, process routers and Bills of Materials with full documentation and configuration control required. Hands on Manufacturing experience is a plus. Skills Strong verbal and written technical communication skills. Computer skills in word processing and spreadsheet software including MS Word, Excel, Access; CAD software knowledge desired (Solidworks preferred). Strong analytical, fault isolation, and problem-solving skills. Strong organization skills and attention to details required. Must be capable of reading blueprints. Experience in process design, development and project planning is desired. Must understand production flow and be capable of logically developing planning within this flow that correctly and efficiently builds product. Working Conditions Routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and office machinery. Noise level - Usually moderate. Physical Requirements Walk. Occasionally move about inside the office to access file cabinets, office machinery, etc. Talking. Expressing or exchanging ideas by means of the spoken word. Those activities in which they must convey detailed or important spoken instructions to other employees accurately, loudly, or quickly. Hearing. Perceiving the nature of sounds at normal speaking levels with or without correction. Ability to receive detailed information through oral communication, and to make the discriminations in sound. Reaching. Extending hand(s) and arm(s) in any direction. Use hands/fingers to type/handle. Operating a computer and other office productivity machinery, such as a calculator, copy machine, and computer printer. Grasping. Applying pressure to an object with the fingers and palm. Stooping. Bending body downward and forward by bending spine at the waist. This factor is important if it occurs to a considerable degree and requires full motion of the lower extremities and back muscles. Lifting. Raising objects from a lower to a higher position or moving objects horizontally from position-to-position. This factor is important if it occurs to a considerable degree and requires substantial use of upper extremities and back muscles. Sedentary Work. Sedentary work involves sitting most of the time. Jobs are sedentary if walking and standing are required only occasionally, and all other sedentary criteria are met. Visual acuity. Specific vision abilities required by this job include close vision and ability to adjust focus. Safety Requirements All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent A&D: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent A&D is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. To conform to U.S. Government export regulations (ITAR), applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8. U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State."

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. This position is part of our Gas Turbine Products Engineering Rotation Program within Turbomachinery Products (TMP). The TMP Engineering Rotation Program provides the foundation for continued growth and long-term success of both our engineers and our organization. Entry Level engineers will gain access to challenging assignments intended to generate critical business value and enable the engineer to acquire gas turbine product knowledge. These assignments across an array of diverse engineering departments will grow the Entry Level engineer's professional network, cultivate an enterprise perspective, and maximize engagement within an organization of technical specialists. This program is tailored to the engineer's proficiencies and interests in preparation for a challenging and rewarding engineering career at Solar Turbines. Each program consists of multiple rotations of up to six months each in departments such as: * Materials and Process Engineering * Mechanical Design * Additive Manufacturing * Turbine Production Engineering * Gears and Rotor Engineering * Experimental Product Development and Test * Condition Based Engineering * Aftermarket Engineering * Customer Services At the conclusion of the rotation program, the Entry Level engineer will join Materials and Process Engineering for their long-term assignment. Minimum Qualifications: * Must have obtained or will obtain a minimum of a bachelor's degree in Materials Science, Materials Engineering, Metallurgical Engineering or other related engineering disciplines. * Overall cumulative GPA of 3.0 on a 4.0 scale or higher. * Must have obtained or will obtain a Bachelor's degree or greater between May 2024 and July 2026. * Less than one year of relevant industry experience. * Technical knowledge of engineering fundamentals. * Must be able and eager to relocate to San Diego, CA. Preferred Qualifications: * Demonstrated leadership and teamwork capabilities. * Effective problem-solving skills and technical judgment. * Ability to effectively articulate technical challenges and solutions. * Exhibit exceptional written and verbal communication skills. * Previous related internship or co-op experience. * Ability to handle multiple priorities for a variety of tasks. Applicable Skills: * Knowledge of physical and mechanical metallurgy, characterization, and thermo-mechanical processing. * Knowledge of coatings for oxidation and/or corrosion protection. * Exposure to failure analysis methods for metallic components * Material modeling * Statistics / Data analytics * Coding, ie. MATLAB, Python, C#, etc. * Effective written and oral communication skills * Creative problem-solving capabilities * Self-motivated * Compensation & Benefits Base salary for this role ranges from $92,500, to $118,000. Actual salary will be based on experience. The total rewards package, beyond base salary includes: * Annual incentive bonus plan* * Medical, dental and vision coverage starting day 1 * Paid time off plan (Vacation, Holiday, Volunteer, Etc.) * 401(k) Savings Plan including company match * Health savings account (HSA) * Flexible spending accounts (FSAs) * Short and long-term disability coverage * Life Insurance * Parental leave * Employee Assistance Programs * Voluntary Benefits and Employee Discounts * Career Development #2026ETPosting Summary Pay Range: $76,542.00 - $114,814.00 Compensation and benefits offered may vary depending on multiple individualized factors, job level, market location, job-related knowledge, skills, individual performance and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. * Medical, dental, and vision benefits* * Paid time off plan (Vacation, Holidays, Volunteer, etc.)* * 401(k) savings plans* * Health Savings Account (HSA)* * Flexible Spending Accounts (FSAs)* * Health Lifestyle Programs* * Employee Assistance Program* * Voluntary Benefits and Employee Discounts* * Career Development* * Incentive bonus* * Disability benefits * Life Insurance * Parental leave * Adoption benefits * Tuition Reimbursement * These benefits also apply to part-time employees This position requires working onsite five days a week. Relocation is available for this position. Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at **************************** Posting Dates: October 28, 2025 - December 31, 2025 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

The Company Dexcom Corporation (NASDAQ DXCM) is a pioneer and global leader in continuous glucose monitoring (CGM). Dexcom began as a small company with a big dream: To forever change how diabetes is managed. To unlock information and insights that drive better health outcomes. Here we are 25 years later, having pioneered an industry. And we're just getting started. We are broadening our vision beyond diabetes to empower people to take control of health. That means personalized, actionable insights aimed at solving important health challenges. To continue what we've started: Improving human health. We are driven by thousands of ambitious, passionate people worldwide who are willing to fight like warriors to earn the trust of our customers by listening, serving with integrity, thinking big, and being dependable. We've already changed millions of lives and we're ready to change millions more. Our future ambition is to become a leading consumer health technology company while continuing to develop solutions for serious health conditions. We'll get there by constantly reinventing unique biosensing-technology experiences. Though we've come a long way from our small company days, our dreams are bigger than ever. The opportunity to improve health on a global scale stands before us. Meet the team: As a member of the Advanced Research & Technology (ART) Team you will support the evaluation of new technologies through testing, modeling, analysis, prototyping, and experimentation. Working as a member of a technology team, this engineer will collaborate and communicate with other engineers and scientists on the team as well as interface with technical personnel from other departments and vendors. This position offers a unique opportunity to have significant impact towards defining Dexcom's development roadmap and influencing the lives of millions of people within a small team of engineers. Where you come in: * Design, setup, plan, and perform electrical, mechanical, or related experiments in the lab * Design, fabricate, document, and troubleshoot new test fixtures and equipment * Improve and/or optimize existing test equipment, fixtures, and methods * Support development of new or improved test methods simulating actual product use conditions * Generate and execute test protocols leveraging statistical best practices, documenting the results * Analyze experimental data to build statistically sound models and develop conclusions * Provide design recommendations while also acknowledging potential tradeoffs of solutions * Build and evaluate prototypes What makes you successful: * Comfortable working hands-on in a fast-paced environment * Comfortable managing several parallel activities * High Proficiency with engineering software tools for CAD (SolidWorks required) * High Proficiency with statistical analysis (DOE, Gauge R&R, ANOVA, Power and Sample Size) * Ability to deal with ambiguity/uncertainty and a willingness to try new/challenging things * Strong interpersonal and teamwork skills * Demonstrated written and verbal communication skills * Familiarity with DMAIC problem solving techniques * Familiarity with FEA tools (Abaqus preferred) * Familiarity with JMP or Minitab (JMP preferred) * Familiarity with programming (LabView preferred) * Familiarity with image processing techniques * Familiarity with control systems (actuators, pneumatics, sensors, etc.) * Familiarity operating equipment within a machine shop (Mill, Lathe, etc.) * Experience working within a regulated medical device environment * Proficiency with Microsoft Office Products * Basic skills or knowledge related to product, process, equipment, and fixture design, development and improvement What you'll get: * A front row seat to life changing CGM technology. Learn about our brave #dexcomwarriors community. * A full and comprehensive benefits program. * Growth opportunities on a global scale. * Access to career development through in-house learning programs and/or qualified tuition reimbursement. * An exciting and innovative, industry-leading organization committed to our employees, customers, and the communities we serve. Travel Required: * 0-5% Experience and Education Requirements: * Typically requires a Bachelor's degree in a technical discipline, and a minimum of 8- 12 years related experience or Master's degree and 5-7 years equivalent industry experience or a PhD and 2-4 years of experience. Please note: The information contained herein is not intended to be an all-inclusive list of the duties and responsibilities of the job, nor are they intended to be an all-inclusive list of the skills and abilities required to do the job. Management may, at its discretion, assign or reassign duties and responsibilities to this job at any time. The duties and responsibilities in this job description may be subject to change at any time due to reasonable accommodation or other reasons. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. An Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, or protected veteran status and will not be discriminated against on the basis of disability. Dexcom's AAP may be viewed upon request by contacting Talent Acquisition at ****************************. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact Dexcom Talent Acquisition at ****************************. Meritain, an Aetna Company, creates and publishes the Machine-Readable Files on behalf of Dexcom. To link to the Machine-Readable Files, please click on the URL provided: ***************************************************** Code=MERITAIN_I&brand Code=MERITAINOVER/machine-readable-transparency-in-coverage?reporting EntityType=TPA_19874&lock=true To all Staffing and Recruiting Agencies: Our Careers Site is only for individuals seeking a job at Dexcom. Only authorized staffing and recruiting agencies may use this site or to submit profiles, applications or resumes on specific requisitions. Dexcom does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to the Talent Acquisition team, Dexcom employees or any other company location. Dexcom is not responsible for any fees related to unsolicited resumes/applications. Salary: $128,600.00 - $214,400.00